Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds

Pull LED updates from Bryan Wu:
 "This cycle we got:
   - a fix of attribute-creation race for the whole leds subsystem
   - new drivers (HID:GT683R, leds-ipaq-micro)
   - other fixing and clean up"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits)
  leds: ipaq-micro: fix sparse non static symbol warning
  leds: add driver for the iPAQ micro
  Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells
  leds: convert blink timer to workqueue
  leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default
  leds:pca963x: Always initialize MODE2 register
  leds:pca963x: Add support for PCA9635 LED driver chip
  HID: gt683r: move mode attribute to led-class devices
  HID: gt683r: fix race condition
  HID: add support for MSI GT683R led panels
  leds: lp55xx-common: fix attribute-creation race
  leds: lp55xx-common: fix sysfs entry leak
  input: lm8323: fix attribute-creation race
  leds: wm831x-status: fix attribute-creation race
  leds: ss4200: fix attribute-creation race
  leds: ns2: fix attribute-creation race
  leds: netxbig: fix attribute-creation race
  leds: max8997: fix attribute-creation race
  leds: lm3642: fix attribute-creation race
  leds: lm355x: fix attribute-creation race
  ...

Documentation/ABI/testing/sysfs-class-leds-gt683r

@@ -0,0 +1,16 @@
+What:		/sys/class/leds/<led>/gt683r/mode
+Date:		Jun 2014
+KernelVersion:	3.17
+Contact:	Janne Kanniainen <janne.kanniainen@gmail.com>
+Description:
+		Set the mode of LEDs. You should notice that changing the mode
+		of one LED will update the mode of its two sibling devices as
+		well.
+
+		0 - normal
+		1 - audio
+		2 - breathing
+
+		Normal: LEDs are fully on when enabled
+		Audio:  LEDs brightness depends on sound level
+		Breathing: LEDs brightness varies at human breathing rate

Documentation/devicetree/bindings/leds/pca963x.txt

@@ -1,18 +1,19 @@
 LEDs connected to pca9632, pca9633 or pca9634
 
 Required properties:
-- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634"
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
 
 Optional properties:
-- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+  to open-drain, newer chips to totem pole)
 - nxp,hw-blink : use hardware blinking instead of software blinking
 
 Each led is represented as a sub-node of the nxp,pca963x device.
 
 LED sub-node properties:
 - label : (optional) see Documentation/devicetree/bindings/leds/common.txt
-- reg : number of LED line (could be from 0 to 3  in pca9632 or pca9633
-		or 0 to 7 in pca9634)
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+		0 to 7 in pca9634, or 0 to 15 in pca9635)
 - linux,default-trigger : (optional)
    see Documentation/devicetree/bindings/leds/common.txt
 

Documentation/devicetree/bindings/leds/tca6507.txt

@@ -8,7 +8,7 @@ Required properties:
 
 Optional properties:
 - gpio-controller: allows lines to be used as output-only GPIOs.
-- #gpio-cells: if present, must be 0.
+- #gpio-cells: if present, must not be 0.
 
 Each led is represented as a sub-node of the ti,tca6507 device.
 

drivers/hid/Kconfig

@@ -261,6 +261,20 @@ config HOLTEK_FF
 	  Say Y here if you have a Holtek On Line Grip based game controller
 	  and want to have force feedback support for it.
 
+config HID_GT683R
+	tristate "MSI GT68xR LED support"
+	depends on LEDS_CLASS && USB_HID
+	---help---
+	Say Y here if you want to enable support for the three MSI GT68xR LEDs
+
+	This driver support following modes:
+	  - Normal: LEDs are fully on when enabled
+	  - Audio:  LEDs brightness depends on sound level
+	  - Breathing: LEDs brightness varies at human breathing rate
+
+	Currently the following devices are know to be supported:
+	  - MSI GT683R
+
 config HID_HUION
 	tristate "Huion tablets"
 	depends on USB_HID

drivers/hid/Makefile

@@ -48,6 +48,7 @@ obj-$(CONFIG_HID_EMS_FF)	+= hid-emsff.o
 obj-$(CONFIG_HID_ELECOM)	+= hid-elecom.o
 obj-$(CONFIG_HID_ELO)		+= hid-elo.o
 obj-$(CONFIG_HID_EZKEY)		+= hid-ezkey.o
+obj-$(CONFIG_HID_GT683R)	+= hid-gt683r.o
 obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-kbd.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-mouse.o

drivers/hid/hid-core.c

@@ -1849,6 +1849,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2) },

drivers/hid/hid-gt683r.c

@@ -0,0 +1,321 @@
+/*
+ * MSI GT683R led driver
+ *
+ * Copyright (c) 2014 Janne Kanniainen <janne.kanniainen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+#define GT683R_BUFFER_SIZE			8
+
+/*
+ * GT683R_LED_OFF: all LEDs are off
+ * GT683R_LED_AUDIO: LEDs brightness depends on sound level
+ * GT683R_LED_BREATHING: LEDs brightness varies at human breathing rate
+ * GT683R_LED_NORMAL: LEDs are fully on when enabled
+ */
+enum gt683r_led_mode {
+	GT683R_LED_OFF = 0,
+	GT683R_LED_AUDIO = 2,
+	GT683R_LED_BREATHING = 3,
+	GT683R_LED_NORMAL = 5
+};
+
+enum gt683r_panels {
+	GT683R_LED_BACK = 0,
+	GT683R_LED_SIDE = 1,
+	GT683R_LED_FRONT = 2,
+	GT683R_LED_COUNT,
+};
+
+static const char * const gt683r_panel_names[] = {
+	"back",
+	"side",
+	"front",
+};
+
+struct gt683r_led {
+	struct hid_device *hdev;
+	struct led_classdev led_devs[GT683R_LED_COUNT];
+	struct mutex lock;
+	struct work_struct work;
+	enum led_brightness brightnesses[GT683R_LED_COUNT];
+	enum gt683r_led_mode mode;
+};
+
+static const struct hid_device_id gt683r_led_id[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL) },
+	{ }
+};
+
+static void gt683r_brightness_set(struct led_classdev *led_cdev,
+				enum led_brightness brightness)
+{
+	int i;
+	struct device *dev = led_cdev->dev->parent;
+	struct hid_device *hdev = container_of(dev, struct hid_device, dev);
+	struct gt683r_led *led = hid_get_drvdata(hdev);
+
+	for (i = 0; i < GT683R_LED_COUNT; i++) {
+		if (led_cdev == &led->led_devs[i])
+			break;
+	}
+
+	if (i < GT683R_LED_COUNT) {
+		led->brightnesses[i] = brightness;
+		schedule_work(&led->work);
+	}
+}
+
+static ssize_t mode_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	u8 sysfs_mode;
+	struct hid_device *hdev = container_of(dev->parent,
+					struct hid_device, dev);
+	struct gt683r_led *led = hid_get_drvdata(hdev);
+
+	if (led->mode == GT683R_LED_NORMAL)
+		sysfs_mode = 0;
+	else if (led->mode == GT683R_LED_AUDIO)
+		sysfs_mode = 1;
+	else
+		sysfs_mode = 2;
+
+	return scnprintf(buf, PAGE_SIZE, "%u\n", sysfs_mode);
+}
+
+static ssize_t mode_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	u8 sysfs_mode;
+	struct hid_device *hdev = container_of(dev->parent,
+					struct hid_device, dev);
+	struct gt683r_led *led = hid_get_drvdata(hdev);
+
+
+	if (kstrtou8(buf, 10, &sysfs_mode) || sysfs_mode > 2)
+		return -EINVAL;
+
+	mutex_lock(&led->lock);
+
+	if (sysfs_mode == 0)
+		led->mode = GT683R_LED_NORMAL;
+	else if (sysfs_mode == 1)
+		led->mode = GT683R_LED_AUDIO;
+	else
+		led->mode = GT683R_LED_BREATHING;
+
+	mutex_unlock(&led->lock);
+	schedule_work(&led->work);
+
+	return count;
+}
+
+static int gt683r_led_snd_msg(struct gt683r_led *led, u8 *msg)
+{
+	int ret;
+
+	ret = hid_hw_raw_request(led->hdev, msg[0], msg, GT683R_BUFFER_SIZE,
+				HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
+	if (ret != GT683R_BUFFER_SIZE) {
+		hid_err(led->hdev,
+			"failed to send set report request: %i\n", ret);
+		if (ret < 0)
+			return ret;
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int gt683r_leds_set(struct gt683r_led *led, u8 leds)
+{
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(GT683R_BUFFER_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	buffer[0] = 0x01;
+	buffer[1] = 0x02;
+	buffer[2] = 0x30;
+	buffer[3] = leds;
+	ret = gt683r_led_snd_msg(led, buffer);
+
+	kfree(buffer);
+	return ret;
+}
+
+static int gt683r_mode_set(struct gt683r_led *led, u8 mode)
+{
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(GT683R_BUFFER_SIZE, GFP_KERNEL);
+	if (!buffer)
+		return -ENOMEM;
+
+	buffer[0] = 0x01;
+	buffer[1] = 0x02;
+	buffer[2] = 0x20;
+	buffer[3] = mode;
+	buffer[4] = 0x01;
+	ret = gt683r_led_snd_msg(led, buffer);
+
+	kfree(buffer);
+	return ret;
+}
+
+static void gt683r_led_work(struct work_struct *work)
+{
+	int i;
+	u8 leds = 0;
+	u8 mode;
+	struct gt683r_led *led = container_of(work, struct gt683r_led, work);
+
+	mutex_lock(&led->lock);
+
+	for (i = 0; i < GT683R_LED_COUNT; i++) {
+		if (led->brightnesses[i])
+			leds |= BIT(i);
+	}
+
+	if (gt683r_leds_set(led, leds))
+		goto fail;
+
+	if (leds)
+		mode = led->mode;
+	else
+		mode = GT683R_LED_OFF;
+
+	gt683r_mode_set(led, mode);
+fail:
+	mutex_unlock(&led->lock);
+}
+
+static DEVICE_ATTR_RW(mode);
+
+static struct attribute *gt683r_led_attrs[] = {
+	&dev_attr_mode.attr,
+	NULL
+};
+
+static const struct attribute_group gt683r_led_group = {
+	.name = "gt683r",
+	.attrs = gt683r_led_attrs,
+};
+
+static const struct attribute_group *gt683r_led_groups[] = {
+	&gt683r_led_group,
+	NULL
+};
+
+static int gt683r_led_probe(struct hid_device *hdev,
+			const struct hid_device_id *id)
+{
+	int i;
+	int ret;
+	int name_sz;
+	char *name;
+	struct gt683r_led *led;
+
+	led = devm_kzalloc(&hdev->dev, sizeof(*led), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	mutex_init(&led->lock);
+	INIT_WORK(&led->work, gt683r_led_work);
+
+	led->mode = GT683R_LED_NORMAL;
+	led->hdev = hdev;
+	hid_set_drvdata(hdev, led);
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "hid parsing failed\n");
+		return ret;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		return ret;
+	}
+
+	for (i = 0; i < GT683R_LED_COUNT; i++) {
+		name_sz = strlen(dev_name(&hdev->dev)) +
+				strlen(gt683r_panel_names[i]) + 3;
+
+		name = devm_kzalloc(&hdev->dev, name_sz, GFP_KERNEL);
+		if (!name) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		snprintf(name, name_sz, "%s::%s",
+				dev_name(&hdev->dev), gt683r_panel_names[i]);
+		led->led_devs[i].name = name;
+		led->led_devs[i].max_brightness = 1;
+		led->led_devs[i].brightness_set = gt683r_brightness_set;
+		led->led_devs[i].groups = gt683r_led_groups;
+
+		ret = led_classdev_register(&hdev->dev, &led->led_devs[i]);
+		if (ret) {
+			hid_err(hdev, "could not register led device\n");
+			goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	for (i = i - 1; i >= 0; i--)
+		led_classdev_unregister(&led->led_devs[i]);
+	hid_hw_stop(hdev);
+	return ret;
+}
+
+static void gt683r_led_remove(struct hid_device *hdev)
+{
+	int i;
+	struct gt683r_led *led = hid_get_drvdata(hdev);
+
+	for (i = 0; i < GT683R_LED_COUNT; i++)
+		led_classdev_unregister(&led->led_devs[i]);
+	flush_work(&led->work);
+	hid_hw_stop(hdev);
+}
+
+static struct hid_driver gt683r_led_driver = {
+	.probe = gt683r_led_probe,
+	.remove = gt683r_led_remove,
+	.name = "gt683r_led",
+	.id_table = gt683r_led_id,
+};
+
+module_hid_driver(gt683r_led_driver);
+
+MODULE_AUTHOR("Janne Kanniainen");
+MODULE_DESCRIPTION("MSI GT683R led driver");
+MODULE_LICENSE("GPL");

drivers/hid/hid-ids.h

@@ -650,7 +650,7 @@
 #define USB_DEVICE_ID_GENIUS_KB29E	0x3004
 
 #define USB_VENDOR_ID_MSI		0x1770
-#define USB_DEVICE_ID_MSI_GX680R_LED_PANEL	0xff00
+#define USB_DEVICE_ID_MSI_GT683R_LED_PANEL 0xff00
 
 #define USB_VENDOR_ID_NATIONAL_SEMICONDUCTOR 0x0400
 #define USB_DEVICE_ID_N_S_HARMONY	0xc359

drivers/hid/usbhid/hid-quirks.c

@@ -74,7 +74,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
-	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GX680R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
+	{ USB_VENDOR_ID_MSI, USB_DEVICE_ID_MSI_GT683R_LED_PANEL, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NEXIO, USB_DEVICE_ID_NEXIO_MULTITOUCH_PTI0750, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PENMOUNT, USB_DEVICE_ID_PENMOUNT_1610, HID_QUIRK_NOGET },

drivers/input/keyboard/lm8323.c

@@ -558,6 +558,12 @@ static ssize_t lm8323_pwm_store_time(struct device *dev,
 }
 static DEVICE_ATTR(time, 0644, lm8323_pwm_show_time, lm8323_pwm_store_time);
 
+static struct attribute *lm8323_pwm_attrs[] = {
+	&dev_attr_time.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm8323_pwm);
+
 static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev,
 		    const char *name)
 {
@@ -580,16 +586,11 @@ static int init_pwm(struct lm8323_chip *lm, int id, struct device *dev,
 	if (name) {
 		pwm->cdev.name = name;
 		pwm->cdev.brightness_set = lm8323_pwm_set_brightness;
+		pwm->cdev.groups = lm8323_pwm_groups;
 		if (led_classdev_register(dev, &pwm->cdev) < 0) {
 			dev_err(dev, "couldn't register PWM %d\n", id);
 			return -1;
 		}
-		if (device_create_file(pwm->cdev.dev,
-					&dev_attr_time) < 0) {
-			dev_err(dev, "couldn't register time attribute\n");
-			led_classdev_unregister(&pwm->cdev);
-			return -1;
-		}
 		pwm->enabled = true;
 	}
 
@@ -753,11 +754,8 @@ fail3:
 	device_remove_file(&client->dev, &dev_attr_disable_kp);
 fail2:
 	while (--pwm >= 0)
-		if (lm->pwm[pwm].enabled) {
-			device_remove_file(lm->pwm[pwm].cdev.dev,
-					   &dev_attr_time);
+		if (lm->pwm[pwm].enabled)
 			led_classdev_unregister(&lm->pwm[pwm].cdev);
-		}
 fail1:
 	input_free_device(idev);
 	kfree(lm);
@@ -777,10 +775,8 @@ static int lm8323_remove(struct i2c_client *client)
 	device_remove_file(&lm->client->dev, &dev_attr_disable_kp);
 
 	for (i = 0; i < 3; i++)
-		if (lm->pwm[i].enabled) {
-			device_remove_file(lm->pwm[i].cdev.dev, &dev_attr_time);
+		if (lm->pwm[i].enabled)
 			led_classdev_unregister(&lm->pwm[i].cdev);
-		}
 
 	kfree(lm);
 

drivers/leds/Kconfig

@@ -143,6 +143,13 @@ config LEDS_SUNFIRE
 	  This option enables support for the Left, Middle, and Right
 	  LEDs on the I/O and CPU boards of SunFire UltraSPARC servers.
 
+config LEDS_IPAQ_MICRO
+	tristate "LED Support for the Compaq iPAQ h3xxx"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Choose this option if you want to use the notification LED on
+	  Compaq/HP iPAQ h3100 and h3600.
+
 config LEDS_HP6XX
 	tristate "LED Support for the HP Jornada 6xx"
 	depends on LEDS_CLASS

drivers/leds/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_LEDS_LP8501)		+= leds-lp8501.o
 obj-$(CONFIG_LEDS_LP8788)		+= leds-lp8788.o
 obj-$(CONFIG_LEDS_TCA6507)		+= leds-tca6507.o
 obj-$(CONFIG_LEDS_CLEVO_MAIL)		+= leds-clevo-mail.o
+obj-$(CONFIG_LEDS_IPAQ_MICRO)		+= leds-ipaq-micro.o
 obj-$(CONFIG_LEDS_HP6XX)		+= leds-hp6xx.o
 obj-$(CONFIG_LEDS_OT200)		+= leds-ot200.o
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o

drivers/leds/led-class.c

@@ -15,10 +15,10 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/device.h>
-#include <linux/timer.h>
 #include <linux/err.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
+#include <linux/workqueue.h>
 #include "leds.h"
 
 static struct class *leds_class;
@@ -97,9 +97,10 @@ static const struct attribute_group *led_groups[] = {
 	NULL,
 };
 
-static void led_timer_function(unsigned long data)
+static void led_work_function(struct work_struct *ws)
 {
-	struct led_classdev *led_cdev = (void *)data;
+	struct led_classdev *led_cdev =
+		container_of(ws, struct led_classdev, blink_work.work);
 	unsigned long brightness;
 	unsigned long delay;
 
@@ -143,7 +144,8 @@ static void led_timer_function(unsigned long data)
 		}
 	}
 
-	mod_timer(&led_cdev->blink_timer, jiffies + msecs_to_jiffies(delay));
+	queue_delayed_work(system_wq, &led_cdev->blink_work,
+			   msecs_to_jiffies(delay));
 }
 
 static void set_brightness_delayed(struct work_struct *ws)
@@ -210,8 +212,9 @@ static const struct dev_pm_ops leds_class_dev_pm_ops = {
  */
 int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 {
-	led_cdev->dev = device_create(leds_class, parent, 0, led_cdev,
-				      "%s", led_cdev->name);
+	led_cdev->dev = device_create_with_groups(leds_class, parent, 0,
+					led_cdev, led_cdev->groups,
+					"%s", led_cdev->name);
 	if (IS_ERR(led_cdev->dev))
 		return PTR_ERR(led_cdev->dev);
 
@@ -230,9 +233,7 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev)
 
 	INIT_WORK(&led_cdev->set_brightness_work, set_brightness_delayed);
 
-	init_timer(&led_cdev->blink_timer);
-	led_cdev->blink_timer.function = led_timer_function;
-	led_cdev->blink_timer.data = (unsigned long)led_cdev;
+	INIT_DELAYED_WORK(&led_cdev->blink_work, led_work_function);
 
 #ifdef CONFIG_LEDS_TRIGGERS
 	led_trigger_set_default(led_cdev);

drivers/leds/led-core.c

@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/rwsem.h>
 #include <linux/leds.h>
+#include <linux/workqueue.h>
 #include "leds.h"
 
 DECLARE_RWSEM(leds_list_lock);
@@ -51,7 +52,7 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 		return;
 	}
 
-	mod_timer(&led_cdev->blink_timer, jiffies + 1);
+	queue_delayed_work(system_wq, &led_cdev->blink_work, 1);
 }
 
 
@@ -75,7 +76,7 @@ void led_blink_set(struct led_classdev *led_cdev,
 		   unsigned long *delay_on,
 		   unsigned long *delay_off)
 {
-	del_timer_sync(&led_cdev->blink_timer);
+	cancel_delayed_work_sync(&led_cdev->blink_work);
 
 	led_cdev->flags &= ~LED_BLINK_ONESHOT;
 	led_cdev->flags &= ~LED_BLINK_ONESHOT_STOP;
@@ -90,7 +91,7 @@ void led_blink_set_oneshot(struct led_classdev *led_cdev,
 			   int invert)
 {
 	if ((led_cdev->flags & LED_BLINK_ONESHOT) &&
-	     timer_pending(&led_cdev->blink_timer))
+	     delayed_work_pending(&led_cdev->blink_work))
 		return;
 
 	led_cdev->flags |= LED_BLINK_ONESHOT;
@@ -107,7 +108,7 @@ EXPORT_SYMBOL(led_blink_set_oneshot);
 
 void led_stop_software_blink(struct led_classdev *led_cdev)
 {
-	del_timer_sync(&led_cdev->blink_timer);
+	cancel_delayed_work_sync(&led_cdev->blink_work);
 	led_cdev->blink_delay_on = 0;
 	led_cdev->blink_delay_off = 0;
 }
@@ -116,7 +117,7 @@ EXPORT_SYMBOL_GPL(led_stop_software_blink);
 void led_set_brightness(struct led_classdev *led_cdev,
 			enum led_brightness brightness)
 {
-	/* delay brightness setting if need to stop soft-blink timer */
+	/* delay brightness setting if need to stop soft-blink work */
 	if (led_cdev->blink_delay_on || led_cdev->blink_delay_off) {
 		led_cdev->delayed_set_value = brightness;
 		schedule_work(&led_cdev->set_brightness_work);

drivers/leds/leds-ipaq-micro.c

@@ -0,0 +1,141 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3xxx atmel micro companion support, notification LED subdevice
+ *
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/leds.h>
+
+#define LED_YELLOW	0x00
+#define LED_GREEN	0x01
+
+#define LED_EN          (1 << 4)        /* LED ON/OFF 0:off, 1:on                       */
+#define LED_AUTOSTOP    (1 << 5)        /* LED ON/OFF auto stop set 0:disable, 1:enable */
+#define LED_ALWAYS      (1 << 6)        /* LED Interrupt Mask 0:No mask, 1:mask         */
+
+static void micro_leds_brightness_set(struct led_classdev *led_cdev,
+				      enum led_brightness value)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+	/*
+	 * In this message:
+	 * Byte 0 = LED color: 0 = yellow, 1 = green
+	 *          yellow LED is always ~30 blinks per minute
+	 * Byte 1 = duration (flags?) appears to be ignored
+	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
+	 *          1 = 1/10 second
+	 *          0 = 256/10 second
+	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
+	 *          1 = 1/10 second
+	 *          0 = 256/10 seconds
+	 */
+	struct ipaq_micro_msg msg = {
+		.id = MSG_NOTIFY_LED,
+		.tx_len = 4,
+	};
+
+	msg.tx_data[0] = LED_GREEN;
+	msg.tx_data[1] = 0;
+	if (value) {
+		msg.tx_data[2] = 0; /* Duty cycle 256 */
+		msg.tx_data[3] = 1;
+	} else {
+		msg.tx_data[2] = 1;
+		msg.tx_data[3] = 0; /* Duty cycle 256 */
+	}
+	ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+/* Maximum duty cycle in ms 256/10 sec = 25600 ms */
+#define IPAQ_LED_MAX_DUTY 25600
+
+static int micro_leds_blink_set(struct led_classdev *led_cdev,
+				unsigned long *delay_on,
+				unsigned long *delay_off)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(led_cdev->dev->parent->parent);
+	/*
+	 * In this message:
+	 * Byte 0 = LED color: 0 = yellow, 1 = green
+	 *          yellow LED is always ~30 blinks per minute
+	 * Byte 1 = duration (flags?) appears to be ignored
+	 * Byte 2 = green ontime in 1/10 sec (deciseconds)
+	 *          1 = 1/10 second
+	 *          0 = 256/10 second
+	 * Byte 3 = green offtime in 1/10 sec (deciseconds)
+	 *          1 = 1/10 second
+	 *          0 = 256/10 seconds
+	 */
+	struct ipaq_micro_msg msg = {
+		.id = MSG_NOTIFY_LED,
+		.tx_len = 4,
+	};
+
+	msg.tx_data[0] = LED_GREEN;
+        if (*delay_on > IPAQ_LED_MAX_DUTY ||
+	    *delay_off > IPAQ_LED_MAX_DUTY)
+                return -EINVAL;
+
+        if (*delay_on == 0 && *delay_off == 0) {
+                *delay_on = 100;
+                *delay_off = 100;
+        }
+
+	msg.tx_data[1] = 0;
+	if (*delay_on >= IPAQ_LED_MAX_DUTY)
+		msg.tx_data[2] = 0;
+	else
+		msg.tx_data[2] = (u8) DIV_ROUND_CLOSEST(*delay_on, 100);
+	if (*delay_off >= IPAQ_LED_MAX_DUTY)
+		msg.tx_data[3] = 0;
+	else
+		msg.tx_data[3] = (u8) DIV_ROUND_CLOSEST(*delay_off, 100);
+	return ipaq_micro_tx_msg_sync(micro, &msg);
+}
+
+static struct led_classdev micro_led = {
+	.name			= "led-ipaq-micro",
+	.brightness_set		= micro_leds_brightness_set,
+	.blink_set		= micro_leds_blink_set,
+	.flags			= LED_CORE_SUSPENDRESUME,
+};
+
+static int micro_leds_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	ret = led_classdev_register(&pdev->dev, &micro_led);
+	if (ret) {
+		dev_err(&pdev->dev, "registering led failed: %d\n", ret);
+		return ret;
+	}
+	dev_info(&pdev->dev, "iPAQ micro notification LED driver\n");
+
+	return 0;
+}
+
+static int micro_leds_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&micro_led);
+	return 0;
+}
+
+static struct platform_driver micro_leds_device_driver = {
+	.driver = {
+		.name    = "ipaq-micro-leds",
+	},
+	.probe   = micro_leds_probe,
+	.remove  = micro_leds_remove,
+};
+module_platform_driver(micro_leds_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro leds");
+MODULE_ALIAS("platform:ipaq-micro-leds");

drivers/leds/leds-lm3530.c

@@ -400,6 +400,12 @@ static ssize_t lm3530_mode_set(struct device *dev, struct device_attribute
 }
 static DEVICE_ATTR(mode, 0644, lm3530_mode_get, lm3530_mode_set);
 
+static struct attribute *lm3530_attrs[] = {
+	&dev_attr_mode.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm3530);
+
 static int lm3530_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
@@ -436,6 +442,7 @@ static int lm3530_probe(struct i2c_client *client,
 	drvdata->led_dev.name = LM3530_LED_DEV;
 	drvdata->led_dev.brightness_set = lm3530_brightness_set;
 	drvdata->led_dev.max_brightness = MAX_BRIGHTNESS;
+	drvdata->led_dev.groups = lm3530_groups;
 
 	i2c_set_clientdata(client, drvdata);
 
@@ -461,26 +468,13 @@ static int lm3530_probe(struct i2c_client *client,
 		return err;
 	}
 
-	err = device_create_file(drvdata->led_dev.dev, &dev_attr_mode);
-	if (err < 0) {
-		dev_err(&client->dev, "File device creation failed: %d\n", err);
-		err = -ENODEV;
-		goto err_create_file;
-	}
-
 	return 0;
-
-err_create_file:
-	led_classdev_unregister(&drvdata->led_dev);
-	return err;
 }
 
 static int lm3530_remove(struct i2c_client *client)
 {
 	struct lm3530_data *drvdata = i2c_get_clientdata(client);
 
-	device_remove_file(drvdata->led_dev.dev, &dev_attr_mode);
-
 	lm3530_led_disable(drvdata);
 	led_classdev_unregister(&drvdata->led_dev);
 	return 0;

drivers/leds/leds-lm3533.c

@@ -645,6 +645,11 @@ static struct attribute_group lm3533_led_attribute_group = {
 	.attrs		= lm3533_led_attributes
 };
 
+static const struct attribute_group *lm3533_led_attribute_groups[] = {
+	&lm3533_led_attribute_group,
+	NULL
+};
+
 static int lm3533_led_setup(struct lm3533_led *led,
 					struct lm3533_led_platform_data *pdata)
 {
@@ -692,6 +697,7 @@ static int lm3533_led_probe(struct platform_device *pdev)
 	led->cdev.brightness_get = lm3533_led_get;
 	led->cdev.blink_set = lm3533_led_blink_set;
 	led->cdev.brightness = LED_OFF;
+	led->cdev.groups = lm3533_led_attribute_groups,
 	led->id = pdev->id;
 
 	mutex_init(&led->mutex);
@@ -715,25 +721,16 @@ static int lm3533_led_probe(struct platform_device *pdev)
 
 	led->cb.dev = led->cdev.dev;
 
-	ret = sysfs_create_group(&led->cdev.dev->kobj,
-						&lm3533_led_attribute_group);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to create sysfs attributes\n");
-		goto err_unregister;
-	}
-
 	ret = lm3533_led_setup(led, pdata);
 	if (ret)
-		goto err_sysfs_remove;
+		goto err_unregister;
 
 	ret = lm3533_ctrlbank_enable(&led->cb);
 	if (ret)
-		goto err_sysfs_remove;
+		goto err_unregister;
 
 	return 0;
 
-err_sysfs_remove:
-	sysfs_remove_group(&led->cdev.dev->kobj, &lm3533_led_attribute_group);
 err_unregister:
 	led_classdev_unregister(&led->cdev);
 	flush_work(&led->work);
@@ -748,7 +745,6 @@ static int lm3533_led_remove(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "%s\n", __func__);
 
 	lm3533_ctrlbank_disable(&led->cb);
-	sysfs_remove_group(&led->cdev.dev->kobj, &lm3533_led_attribute_group);
 	led_classdev_unregister(&led->cdev);
 	flush_work(&led->work);
 

drivers/leds/leds-lm355x.c

@@ -413,6 +413,12 @@ out:
 
 static DEVICE_ATTR(pattern, S_IWUSR, NULL, lm3556_indicator_pattern_store);
 
+static struct attribute *lm355x_indicator_attrs[] = {
+	&dev_attr_pattern.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm355x_indicator);
+
 static const struct regmap_config lm355x_regmap = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -501,25 +507,18 @@ static int lm355x_probe(struct i2c_client *client,
 	else
 		chip->cdev_indicator.max_brightness = 8;
 	chip->cdev_indicator.brightness_set = lm355x_indicator_brightness_set;
+	/* indicator pattern control only for LM3556 */
+	if (id->driver_data == CHIP_LM3556)
+		chip->cdev_indicator.groups = lm355x_indicator_groups;
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_indicator);
 	if (err < 0)
 		goto err_create_indicator_file;
-	/* indicator pattern control only for LM3554 */
-	if (id->driver_data == CHIP_LM3556) {
-		err =
-		    device_create_file(chip->cdev_indicator.dev,
-				       &dev_attr_pattern);
-		if (err < 0)
-			goto err_create_pattern_file;
-	}
 
 	dev_info(&client->dev, "%s is initialized\n",
 		 lm355x_name[id->driver_data]);
 	return 0;
 
-err_create_pattern_file:
-	led_classdev_unregister(&chip->cdev_indicator);
 err_create_indicator_file:
 	led_classdev_unregister(&chip->cdev_torch);
 err_create_torch_file:
@@ -534,8 +533,6 @@ static int lm355x_remove(struct i2c_client *client)
 	struct lm355x_reg_data *preg = chip->regs;
 
 	regmap_write(chip->regmap, preg[REG_OPMODE].regno, 0);
-	if (chip->type == CHIP_LM3556)
-		device_remove_file(chip->cdev_indicator.dev, &dev_attr_pattern);
 	led_classdev_unregister(&chip->cdev_indicator);
 	flush_work(&chip->work_indicator);
 	led_classdev_unregister(&chip->cdev_torch);

drivers/leds/leds-lm3642.c

@@ -313,6 +313,18 @@ static const struct regmap_config lm3642_regmap = {
 	.max_register = REG_MAX,
 };
 
+static struct attribute *lm3642_flash_attrs[] = {
+	&dev_attr_strobe_pin.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm3642_flash);
+
+static struct attribute *lm3642_torch_attrs[] = {
+	&dev_attr_torch_pin.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(lm3642_torch);
+
 static int lm3642_probe(struct i2c_client *client,
 				  const struct i2c_device_id *id)
 {
@@ -364,17 +376,13 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_flash.max_brightness = 16;
 	chip->cdev_flash.brightness_set = lm3642_strobe_brightness_set;
 	chip->cdev_flash.default_trigger = "flash";
+	chip->cdev_flash.groups = lm3642_flash_groups,
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_flash);
 	if (err < 0) {
 		dev_err(chip->dev, "failed to register flash\n");
 		goto err_out;
 	}
-	err = device_create_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
-	if (err < 0) {
-		dev_err(chip->dev, "failed to create strobe-pin file\n");
-		goto err_create_flash_pin_file;
-	}
 
 	/* torch */
 	INIT_WORK(&chip->work_torch, lm3642_deferred_torch_brightness_set);
@@ -382,17 +390,13 @@ static int lm3642_probe(struct i2c_client *client,
 	chip->cdev_torch.max_brightness = 8;
 	chip->cdev_torch.brightness_set = lm3642_torch_brightness_set;
 	chip->cdev_torch.default_trigger = "torch";
+	chip->cdev_torch.groups = lm3642_torch_groups,
 	err = led_classdev_register((struct device *)
 				    &client->dev, &chip->cdev_torch);
 	if (err < 0) {
 		dev_err(chip->dev, "failed to register torch\n");
 		goto err_create_torch_file;
 	}
-	err = device_create_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
-	if (err < 0) {
-		dev_err(chip->dev, "failed to create torch-pin file\n");
-		goto err_create_torch_pin_file;
-	}
 
 	/* indicator */
 	INIT_WORK(&chip->work_indicator,
@@ -411,12 +415,8 @@ static int lm3642_probe(struct i2c_client *client,
 	return 0;
 
 err_create_indicator_file:
-	device_remove_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
-err_create_torch_pin_file:
 	led_classdev_unregister(&chip->cdev_torch);
 err_create_torch_file:
-	device_remove_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
-err_create_flash_pin_file:
 	led_classdev_unregister(&chip->cdev_flash);
 err_out:
 	return err;
@@ -428,10 +428,8 @@ static int lm3642_remove(struct i2c_client *client)
 
 	led_classdev_unregister(&chip->cdev_indicator);
 	flush_work(&chip->work_indicator);
-	device_remove_file(chip->cdev_torch.dev, &dev_attr_torch_pin);
 	led_classdev_unregister(&chip->cdev_torch);
 	flush_work(&chip->work_torch);
-	device_remove_file(chip->cdev_flash.dev, &dev_attr_strobe_pin);
 	led_classdev_unregister(&chip->cdev_flash);
 	flush_work(&chip->work_flash);
 	regmap_write(chip->regmap, REG_ENABLE, 0);

drivers/leds/leds-lp55xx-common.c

@@ -127,15 +127,12 @@ static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, lp55xx_show_current,
 		lp55xx_store_current);
 static DEVICE_ATTR(max_current, S_IRUGO , lp55xx_show_max_current, NULL);
 
-static struct attribute *lp55xx_led_attributes[] = {
+static struct attribute *lp55xx_led_attrs[] = {
 	&dev_attr_led_current.attr,
 	&dev_attr_max_current.attr,
 	NULL,
 };
-
-static struct attribute_group lp55xx_led_attr_group = {
-	.attrs = lp55xx_led_attributes
-};
+ATTRIBUTE_GROUPS(lp55xx_led);
 
 static void lp55xx_set_brightness(struct led_classdev *cdev,
 			     enum led_brightness brightness)
@@ -176,6 +173,7 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 	}
 
 	led->cdev.brightness_set = lp55xx_set_brightness;
+	led->cdev.groups = lp55xx_led_groups;
 
 	if (pdata->led_config[chan].name) {
 		led->cdev.name = pdata->led_config[chan].name;
@@ -185,24 +183,12 @@ static int lp55xx_init_led(struct lp55xx_led *led,
 		led->cdev.name = name;
 	}
 
-	/*
-	 * register led class device for each channel and
-	 * add device attributes
-	 */
-
 	ret = led_classdev_register(dev, &led->cdev);
 	if (ret) {
 		dev_err(dev, "led register err: %d\n", ret);
 		return ret;
 	}
 
-	ret = sysfs_create_group(&led->cdev.dev->kobj, &lp55xx_led_attr_group);
-	if (ret) {
-		dev_err(dev, "led sysfs err: %d\n", ret);
-		led_classdev_unregister(&led->cdev);
-		return ret;
-	}
-
 	return 0;
 }
 

drivers/leds/leds-max8997.c

@@ -229,6 +229,12 @@ static ssize_t max8997_led_store_mode(struct device *dev,
 
 static DEVICE_ATTR(mode, 0644, max8997_led_show_mode, max8997_led_store_mode);
 
+static struct attribute *max8997_attrs[] = {
+	&dev_attr_mode.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(max8997);
+
 static int max8997_led_probe(struct platform_device *pdev)
 {
 	struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -253,6 +259,7 @@ static int max8997_led_probe(struct platform_device *pdev)
 	led->cdev.brightness_set = max8997_led_brightness_set;
 	led->cdev.flags |= LED_CORE_SUSPENDRESUME;
 	led->cdev.brightness = 0;
+	led->cdev.groups = max8997_groups;
 	led->iodev = iodev;
 
 	/* initialize mode and brightness according to platform_data */
@@ -281,14 +288,6 @@ static int max8997_led_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	ret = device_create_file(led->cdev.dev, &dev_attr_mode);
-	if (ret != 0) {
-		dev_err(&pdev->dev,
-			"failed to create file: %d\n", ret);
-		led_classdev_unregister(&led->cdev);
-		return ret;
-	}
-
 	return 0;
 }
 
@@ -296,7 +295,6 @@ static int max8997_led_remove(struct platform_device *pdev)
 {
 	struct max8997_led *led = platform_get_drvdata(pdev);
 
-	device_remove_file(led->cdev.dev, &dev_attr_mode);
 	led_classdev_unregister(&led->cdev);
 
 	return 0;

drivers/leds/leds-netxbig.c

@@ -293,10 +293,14 @@ static ssize_t netxbig_led_sata_show(struct device *dev,
 
 static DEVICE_ATTR(sata, 0644, netxbig_led_sata_show, netxbig_led_sata_store);
 
+static struct attribute *netxbig_led_attrs[] = {
+	&dev_attr_sata.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(netxbig_led);
+
 static void delete_netxbig_led(struct netxbig_led_data *led_dat)
 {
-	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
-		device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
 	led_classdev_unregister(&led_dat->cdev);
 }
 
@@ -306,7 +310,6 @@ create_netxbig_led(struct platform_device *pdev,
 		   const struct netxbig_led *template)
 {
 	struct netxbig_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret;
 
 	spin_lock_init(&led_dat->lock);
 	led_dat->gpio_ext = pdata->gpio_ext;
@@ -327,6 +330,12 @@ create_netxbig_led(struct platform_device *pdev,
 	led_dat->sata = 0;
 	led_dat->cdev.brightness = LED_OFF;
 	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	/*
+	 * If available, expose the SATA activity blink capability through
+	 * a "sata" sysfs attribute.
+	 */
+	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE)
+		led_dat->cdev.groups = netxbig_led_groups;
 	led_dat->mode_addr = template->mode_addr;
 	led_dat->mode_val = template->mode_val;
 	led_dat->bright_addr = template->bright_addr;
@@ -334,21 +343,7 @@ create_netxbig_led(struct platform_device *pdev,
 	led_dat->timer = pdata->timer;
 	led_dat->num_timer = pdata->num_timer;
 
-	ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-	if (ret < 0)
-		return ret;
-
-	/*
-	 * If available, expose the SATA activity blink capability through
-	 * a "sata" sysfs attribute.
-	 */
-	if (led_dat->mode_val[NETXBIG_LED_SATA] != NETXBIG_LED_INVALID_MODE) {
-		ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
-		if (ret)
-			led_classdev_unregister(&led_dat->cdev);
-	}
-
-	return ret;
+	return led_classdev_register(&pdev->dev, &led_dat->cdev);
 }
 
 static int netxbig_led_probe(struct platform_device *pdev)

drivers/leds/leds-ns2.c

@@ -185,6 +185,12 @@ static ssize_t ns2_led_sata_show(struct device *dev,
 
 static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
 
+static struct attribute *ns2_led_attrs[] = {
+	&dev_attr_sata.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(ns2_led);
+
 static int
 create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	       const struct ns2_led *template)
@@ -219,6 +225,7 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	led_dat->cdev.blink_set = NULL;
 	led_dat->cdev.brightness_set = ns2_led_set;
 	led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
+	led_dat->cdev.groups = ns2_led_groups;
 	led_dat->cmd = template->cmd;
 	led_dat->slow = template->slow;
 
@@ -235,20 +242,11 @@ create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
 	if (ret < 0)
 		return ret;
 
-	ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
-	if (ret < 0)
-		goto err_free_cdev;
-
 	return 0;
-
-err_free_cdev:
-	led_classdev_unregister(&led_dat->cdev);
-	return ret;
 }
 
 static void delete_ns2_led(struct ns2_led_data *led_dat)
 {
-	device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
 	led_classdev_unregister(&led_dat->cdev);
 }
 

drivers/leds/leds-pca963x.c

@@ -12,7 +12,7 @@
  * directory of this archive for more details.
  *
  * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
- * LED driver for the PCA9634 I2C LED driver (7-bit slave address set by hw.)
+ * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
  *
  * Note that hardware blinking violates the leds infrastructure driver
  * interface since the hardware only supports blinking all LEDs with the
@@ -52,6 +52,7 @@
 enum pca963x_type {
 	pca9633,
 	pca9634,
+	pca9635,
 };
 
 struct pca963x_chipdef {
@@ -74,6 +75,12 @@ static struct pca963x_chipdef pca963x_chipdefs[] = {
 		.ledout_base	= 0xc,
 		.n_leds		= 8,
 	},
+	[pca9635] = {
+		.grppwm		= 0x12,
+		.grpfreq	= 0x13,
+		.ledout_base	= 0x14,
+		.n_leds		= 16,
+	},
 };
 
 /* Total blink period in milliseconds */
@@ -84,6 +91,7 @@ static const struct i2c_device_id pca963x_id[] = {
 	{ "pca9632", pca9633 },
 	{ "pca9633", pca9633 },
 	{ "pca9634", pca9634 },
+	{ "pca9635", pca9635 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, pca963x_id);
@@ -107,7 +115,7 @@ struct pca963x_led {
 	struct work_struct work;
 	enum led_brightness brightness;
 	struct led_classdev led_cdev;
-	int led_num; /* 0 .. 7 potentially */
+	int led_num; /* 0 .. 15 potentially */
 	enum pca963x_cmd cmd;
 	char name[32];
 	u8 gdc;
@@ -321,6 +329,7 @@ static const struct of_device_id of_pca963x_match[] = {
 	{ .compatible = "nxp,pca9632", },
 	{ .compatible = "nxp,pca9633", },
 	{ .compatible = "nxp,pca9634", },
+	{ .compatible = "nxp,pca9635", },
 	{},
 };
 #else
@@ -375,9 +384,8 @@ static int pca963x_probe(struct i2c_client *client,
 	pca963x_chip->leds = pca963x;
 
 	/* Turn off LEDs by default*/
-	i2c_smbus_write_byte_data(client, chip->ledout_base, 0x00);
-	if (chip->n_leds > 4)
-		i2c_smbus_write_byte_data(client, chip->ledout_base + 1, 0x00);
+	for (i = 0; i < chip->n_leds / 4; i++)
+		i2c_smbus_write_byte_data(client, chip->ledout_base + i, 0x00);
 
 	for (i = 0; i < chip->n_leds; i++) {
 		pca963x[i].led_num = i;
@@ -415,9 +423,13 @@ static int pca963x_probe(struct i2c_client *client,
 	/* Disable LED all-call address and set normal mode */
 	i2c_smbus_write_byte_data(client, PCA963X_MODE1, 0x00);
 
-	/* Configure output: open-drain or totem pole (push-pull) */
-	if (pdata && pdata->outdrv == PCA963X_OPEN_DRAIN)
-		i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
+	if (pdata) {
+		/* Configure output: open-drain or totem pole (push-pull) */
+		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
+			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x01);
+		else
+			i2c_smbus_write_byte_data(client, PCA963X_MODE2, 0x05);
+	}
 
 	return 0;
 

drivers/leds/leds-ss4200.c

@@ -469,6 +469,12 @@ static ssize_t nas_led_blink_store(struct device *dev,
 
 static DEVICE_ATTR(blink, 0644, nas_led_blink_show, nas_led_blink_store);
 
+static struct attribute *nasgpio_led_attrs[] = {
+	&dev_attr_blink.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(nasgpio_led);
+
 static int register_nasgpio_led(int led_nr)
 {
 	int ret;
@@ -481,20 +487,18 @@ static int register_nasgpio_led(int led_nr)
 		led->brightness = LED_FULL;
 	led->brightness_set = nasgpio_led_set_brightness;
 	led->blink_set = nasgpio_led_set_blink;
+	led->groups = nasgpio_led_groups;
 	ret = led_classdev_register(&nas_gpio_pci_dev->dev, led);
 	if (ret)
 		return ret;
-	ret = device_create_file(led->dev, &dev_attr_blink);
-	if (ret)
-		led_classdev_unregister(led);
-	return ret;
+
+	return 0;
 }
 
 static void unregister_nasgpio_led(int led_nr)
 {
 	struct led_classdev *led = get_classdev_for_led_nr(led_nr);
 	led_classdev_unregister(led);
-	device_remove_file(led->dev, &dev_attr_blink);
 }
 /*
  * module load/initialization

drivers/leds/leds-wm831x-status.c

@@ -219,6 +219,12 @@ static ssize_t wm831x_status_src_store(struct device *dev,
 
 static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
 
+static struct attribute *wm831x_status_attrs[] = {
+	&dev_attr_src.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(wm831x_status);
+
 static int wm831x_status_probe(struct platform_device *pdev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
@@ -232,8 +238,7 @@ static int wm831x_status_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
 	if (res == NULL) {
 		dev_err(&pdev->dev, "No register resource\n");
-		ret = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_status),
@@ -284,31 +289,21 @@ static int wm831x_status_probe(struct platform_device *pdev)
 	drvdata->cdev.default_trigger = pdata.default_trigger;
 	drvdata->cdev.brightness_set = wm831x_status_set;
 	drvdata->cdev.blink_set = wm831x_status_blink_set;
+	drvdata->cdev.groups = wm831x_status_groups;
 
 	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
-		goto err_led;
+		return ret;
 	}
 
-	ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
-	if (ret != 0)
-		dev_err(&pdev->dev,
-			"No source control for LED: %d\n", ret);
-
 	return 0;
-
-err_led:
-	led_classdev_unregister(&drvdata->cdev);
-err:
-	return ret;
 }
 
 static int wm831x_status_remove(struct platform_device *pdev)
 {
 	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
 
-	device_remove_file(drvdata->cdev.dev, &dev_attr_src);
 	led_classdev_unregister(&drvdata->cdev);
 
 	return 0;

include/linux/leds.h

@@ -15,7 +15,6 @@
 #include <linux/list.h>
 #include <linux/spinlock.h>
 #include <linux/rwsem.h>
-#include <linux/timer.h>
 #include <linux/workqueue.h>
 
 struct device;
@@ -63,11 +62,13 @@ struct led_classdev {
 				     unsigned long *delay_off);
 
 	struct device		*dev;
+	const struct attribute_group	**groups;
+
 	struct list_head	 node;			/* LED Device list */
 	const char		*default_trigger;	/* Trigger to use */
 
 	unsigned long		 blink_delay_on, blink_delay_off;
-	struct timer_list	 blink_timer;
+	struct delayed_work	 blink_work;
 	int			 blink_brightness;
 
 	struct work_struct	set_brightness_work;