net: phy: broadcom: extract register definitions

The Broadcom BCM54xx register definitions are shared between BCM54xx and
BCM7xx internal PHYs for which we are adding support. Extract these
register definitions and put them in include/linux/brcmphy.h for use by
the BCM7xxx internal PHY driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/broadcom.c

@@ -25,58 +25,6 @@
 #define BRCM_PHY_REV(phydev) \
 	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
 
-
-#define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
-#define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
-#define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
-
-#define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
-#define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
-
-#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
-#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
-#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
-#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
-
-#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
-#define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
-#define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
-#define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
-#define MII_BCM54XX_INT_LINK	0x0002	/* Link status changed */
-#define MII_BCM54XX_INT_SPEED	0x0004	/* Link speed change */
-#define MII_BCM54XX_INT_DUPLEX	0x0008	/* Duplex mode changed */
-#define MII_BCM54XX_INT_LRS	0x0010	/* Local receiver status changed */
-#define MII_BCM54XX_INT_RRS	0x0020	/* Remote receiver status changed */
-#define MII_BCM54XX_INT_SSERR	0x0040	/* Scrambler synchronization error */
-#define MII_BCM54XX_INT_UHCD	0x0080	/* Unsupported HCD negotiated */
-#define MII_BCM54XX_INT_NHCD	0x0100	/* No HCD */
-#define MII_BCM54XX_INT_NHCDL	0x0200	/* No HCD link */
-#define MII_BCM54XX_INT_ANPR	0x0400	/* Auto-negotiation page received */
-#define MII_BCM54XX_INT_LC	0x0800	/* All counters below 128 */
-#define MII_BCM54XX_INT_HC	0x1000	/* Counter above 32768 */
-#define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
-#define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
-
-#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
-#define MII_BCM54XX_SHD_WRITE	0x8000
-#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
-#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
-
-/*
- * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
- */
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
-#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
-
-#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
-
-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
-
-
 /*
  * Broadcom LED source encodings.  These are used in BCM5461, BCM5481,
  * BCM5482, and possibly some others.

include/linux/brcmphy.h

@@ -33,4 +33,55 @@
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
 #define PHY_BCM_FLAGS_VALID		0x80000000
 
+/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
+#define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
+#define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
+#define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
+
+#define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
+#define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
+
+#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
+#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
+#define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
+#define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
+#define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
+#define MII_BCM54XX_INT_LINK	0x0002	/* Link status changed */
+#define MII_BCM54XX_INT_SPEED	0x0004	/* Link speed change */
+#define MII_BCM54XX_INT_DUPLEX	0x0008	/* Duplex mode changed */
+#define MII_BCM54XX_INT_LRS	0x0010	/* Local receiver status changed */
+#define MII_BCM54XX_INT_RRS	0x0020	/* Remote receiver status changed */
+#define MII_BCM54XX_INT_SSERR	0x0040	/* Scrambler synchronization error */
+#define MII_BCM54XX_INT_UHCD	0x0080	/* Unsupported HCD negotiated */
+#define MII_BCM54XX_INT_NHCD	0x0100	/* No HCD */
+#define MII_BCM54XX_INT_NHCDL	0x0200	/* No HCD link */
+#define MII_BCM54XX_INT_ANPR	0x0400	/* Auto-negotiation page received */
+#define MII_BCM54XX_INT_LC	0x0800	/* All counters below 128 */
+#define MII_BCM54XX_INT_HC	0x1000	/* Counter above 32768 */
+#define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
+#define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
+
+#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE	0x8000
+#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
+
+/*
+ * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
+ */
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
+#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
+#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
+
+#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
+#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
+
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
+
 #endif /* _LINUX_BRCMPHY_H */