mtd: denali: fix the format of comment blocks

We should use
/*
 * Blah Blah ...
 * ...
 */

for multi-line comment blocks.

In addition, refactor some comments where it seems reasonable and
remove some comments where the code is clear enough such as:

    /* clear interrupts */
    clear_interrupts(denali);

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>

drivers/mtd/nand/denali.c

@@ -29,7 +29,8 @@
 
 MODULE_LICENSE("GPL");
 
-/* We define a module parameter that allows the user to override
+/*
+ * We define a module parameter that allows the user to override
  * the hardware and decide what timing mode should be used.
  */
 #define NAND_DEFAULT_TIMINGS	-1
@@ -41,8 +42,10 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
 
 #define DENALI_NAND_NAME    "denali-nand"
 
-/* We define a macro here that combines all interrupts this driver uses into
- * a single constant value, for convenience. */
+/*
+ * We define a macro here that combines all interrupts this driver uses into
+ * a single constant value, for convenience.
+ */
 #define DENALI_IRQ_ALL	(INTR_STATUS__DMA_CMD_COMP | \
 			INTR_STATUS__ECC_TRANSACTION_DONE | \
 			INTR_STATUS__ECC_ERR | \
@@ -54,23 +57,30 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
 			INTR_STATUS__RST_COMP | \
 			INTR_STATUS__ERASE_COMP)
 
-/* indicates whether or not the internal value for the flash bank is
- * valid or not */
+/*
+ * indicates whether or not the internal value for the flash bank is
+ * valid or not
+ */
 #define CHIP_SELECT_INVALID	-1
 
 #define SUPPORT_8BITECC		1
 
-/* This macro divides two integers and rounds fractional values up
- * to the nearest integer value. */
+/*
+ * This macro divides two integers and rounds fractional values up
+ * to the nearest integer value.
+ */
 #define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
 
-/* this macro allows us to convert from an MTD structure to our own
+/*
+ * this macro allows us to convert from an MTD structure to our own
  * device context (denali) structure.
  */
 #define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
 
-/* These constants are defined by the driver to enable common driver
- * configuration options. */
+/*
+ * These constants are defined by the driver to enable common driver
+ * configuration options.
+ */
 #define SPARE_ACCESS		0x41
 #define MAIN_ACCESS		0x42
 #define MAIN_SPARE_ACCESS	0x43
@@ -84,8 +94,10 @@ MODULE_PARM_DESC(onfi_timing_mode, "Overrides default ONFI setting."
 #define ADDR_CYCLE	1
 #define STATUS_CYCLE	2
 
-/* this is a helper macro that allows us to
- * format the bank into the proper bits for the controller */
+/*
+ * this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller
+ */
 #define BANK(x) ((x) << 24)
 
 /* forward declarations */
@@ -96,12 +108,12 @@ static void denali_irq_enable(struct denali_nand_info *denali,
 							uint32_t int_mask);
 static uint32_t read_interrupt_status(struct denali_nand_info *denali);
 
-/* Certain operations for the denali NAND controller use
- * an indexed mode to read/write data. The operation is
- * performed by writing the address value of the command
- * to the device memory followed by the data. This function
+/*
+ * Certain operations for the denali NAND controller use an indexed mode to
+ * read/write data. The operation is performed by writing the address value
+ * of the command to the device memory followed by the data. This function
  * abstracts this common operation.
-*/
+ */
 static void index_addr(struct denali_nand_info *denali,
 				uint32_t address, uint32_t data)
 {
@@ -117,8 +129,10 @@ static void index_addr_read_data(struct denali_nand_info *denali,
 	*pdata = ioread32(denali->flash_mem + 0x10);
 }
 
-/* We need to buffer some data for some of the NAND core routines.
- * The operations manage buffering that data. */
+/*
+ * We need to buffer some data for some of the NAND core routines.
+ * The operations manage buffering that data.
+ */
 static void reset_buf(struct denali_nand_info *denali)
 {
 	denali->buf.head = denali->buf.tail = 0;
@@ -192,7 +206,8 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
 	return PASS;
 }
 
-/* this routine calculates the ONFI timing values for a given mode and
+/*
+ * this routine calculates the ONFI timing values for a given mode and
  * programs the clocking register accordingly. The mode is determined by
  * the get_onfi_nand_para routine.
  */
@@ -298,9 +313,11 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
 static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 {
 	int i;
-	/* we needn't to do a reset here because driver has already
+
+	/*
+	 * we needn't to do a reset here because driver has already
 	 * reset all the banks before
-	 * */
+	 */
 	if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
 		ONFI_TIMING_MODE__VALUE))
 		return FAIL;
@@ -313,8 +330,10 @@ static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
 
 	nand_onfi_timing_set(denali, i);
 
-	/* By now, all the ONFI devices we know support the page cache */
-	/* rw feature. So here we enable the pipeline_rw_ahead feature */
+	/*
+	 * By now, all the ONFI devices we know support the page cache
+	 * rw feature. So here we enable the pipeline_rw_ahead feature
+	 */
 	/* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
 	/* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE);  */
 
@@ -340,8 +359,10 @@ static void get_toshiba_nand_para(struct denali_nand_info *denali)
 {
 	uint32_t tmp;
 
-	/* Workaround to fix a controller bug which reports a wrong */
-	/* spare area size for some kind of Toshiba NAND device */
+	/*
+	 * Workaround to fix a controller bug which reports a wrong
+	 * spare area size for some kind of Toshiba NAND device
+	 */
 	if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
 		(ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
 		iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
@@ -391,7 +412,8 @@ static void get_hynix_nand_para(struct denali_nand_info *denali,
 	}
 }
 
-/* determines how many NAND chips are connected to the controller. Note for
+/*
+ * determines how many NAND chips are connected to the controller. Note for
  * Intel CE4100 devices we don't support more than one device.
  */
 static void find_valid_banks(struct denali_nand_info *denali)
@@ -421,7 +443,8 @@ static void find_valid_banks(struct denali_nand_info *denali)
 	}
 
 	if (denali->platform == INTEL_CE4100) {
-		/* Platform limitations of the CE4100 device limit
+		/*
+		 * Platform limitations of the CE4100 device limit
 		 * users to a single chip solution for NAND.
 		 * Multichip support is not enabled.
 		 */
@@ -449,12 +472,13 @@ static void detect_max_banks(struct denali_nand_info *denali)
 
 static void detect_partition_feature(struct denali_nand_info *denali)
 {
-	/* For MRST platform, denali->fwblks represent the
+	/*
+	 * For MRST platform, denali->fwblks represent the
 	 * number of blocks firmware is taken,
 	 * FW is in protect partition and MTD driver has no
 	 * permission to access it. So let driver know how many
 	 * blocks it can't touch.
-	 * */
+	 */
 	if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
 		if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
 			PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
@@ -481,11 +505,11 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 			"%s, Line %d, Function: %s\n",
 			__FILE__, __LINE__, __func__);
 
-	/* Use read id method to get device ID and other
-	 * params. For some NAND chips, controller can't
-	 * report the correct device ID by reading from
-	 * DEVICE_ID register
-	 * */
+	/*
+	 * Use read id method to get device ID and other params.
+	 * For some NAND chips, controller can't report the correct
+	 * device ID by reading from DEVICE_ID register
+	 */
 	addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
 	index_addr(denali, (uint32_t)addr | 0, 0x90);
 	index_addr(denali, (uint32_t)addr | 1, 0);
@@ -524,7 +548,8 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
 
 	detect_partition_feature(denali);
 
-	/* If the user specified to override the default timings
+	/*
+	 * If the user specified to override the default timings
 	 * with a specific ONFI mode, we apply those changes here.
 	 */
 	if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
@@ -545,7 +570,8 @@ static void denali_set_intr_modes(struct denali_nand_info *denali,
 		iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
 }
 
-/* validation function to verify that the controlling software is making
+/*
+ * validation function to verify that the controlling software is making
  * a valid request
  */
 static inline bool is_flash_bank_valid(int flash_bank)
@@ -585,7 +611,8 @@ static void denali_irq_enable(struct denali_nand_info *denali,
 		iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
 }
 
-/* This function only returns when an interrupt that this driver cares about
+/*
+ * This function only returns when an interrupt that this driver cares about
  * occurs. This is to reduce the overhead of servicing interrupts
  */
 static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
@@ -625,9 +652,9 @@ static uint32_t read_interrupt_status(struct denali_nand_info *denali)
 	return ioread32(denali->flash_reg + intr_status_reg);
 }
 
-/* This is the interrupt service routine. It handles all interrupts
- * sent to this device. Note that on CE4100, this is a shared
- * interrupt.
+/*
+ * This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared interrupt.
  */
 static irqreturn_t denali_isr(int irq, void *dev_id)
 {
@@ -637,19 +664,21 @@ static irqreturn_t denali_isr(int irq, void *dev_id)
 
 	spin_lock(&denali->irq_lock);
 
-	/* check to see if a valid NAND chip has
-	 * been selected.
-	 */
+	/* check to see if a valid NAND chip has been selected. */
 	if (is_flash_bank_valid(denali->flash_bank)) {
-		/* check to see if controller generated
-		 * the interrupt, since this is a shared interrupt */
+		/*
+		 * check to see if controller generated the interrupt,
+		 * since this is a shared interrupt
+		 */
 		irq_status = denali_irq_detected(denali);
 		if (irq_status != 0) {
 			/* handle interrupt */
 			/* first acknowledge it */
 			clear_interrupt(denali, irq_status);
-			/* store the status in the device context for someone
-			   to read */
+			/*
+			 * store the status in the device context for someone
+			 * to read
+			 */
 			denali->irq_status |= irq_status;
 			/* notify anyone who cares that it happened */
 			complete(&denali->complete);
@@ -681,8 +710,10 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 			/* our interrupt was detected */
 			break;
 		} else {
-			/* these are not the interrupts you are looking for -
-			 * need to wait again */
+			/*
+			 * these are not the interrupts you are looking for -
+			 * need to wait again
+			 */
 			spin_unlock_irq(&denali->irq_lock);
 			retry = true;
 		}
@@ -698,8 +729,10 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 	return intr_status;
 }
 
-/* This helper function setups the registers for ECC and whether or not
- * the spare area will be transferred. */
+/*
+ * This helper function setups the registers for ECC and whether or not
+ * the spare area will be transferred.
+ */
 static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 				bool transfer_spare)
 {
@@ -715,7 +748,8 @@ static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
 			denali->flash_reg + TRANSFER_SPARE_REG);
 }
 
-/* sends a pipeline command operation to the controller. See the Denali NAND
+/*
+ * sends a pipeline command operation to the controller. See the Denali NAND
  * controller's user guide for more information (section 4.2.3.6).
  */
 static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
@@ -737,7 +771,6 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
 
 	setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
 
-	/* clear interrupts */
 	clear_interrupts(denali);
 
 	addr = BANK(denali->flash_bank) | denali->page;
@@ -757,9 +790,10 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
 		cmd = MODE_10 | addr;
 		index_addr(denali, (uint32_t)cmd, access_type);
 
-		/* page 33 of the NAND controller spec indicates we should not
-		   use the pipeline commands in Spare area only mode. So we
-		   don't.
+		/*
+		 * page 33 of the NAND controller spec indicates we should not
+		 * use the pipeline commands in Spare area only mode.
+		 * So we don't.
 		 */
 		if (access_type == SPARE_ACCESS) {
 			cmd = MODE_01 | addr;
@@ -768,10 +802,11 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
 			index_addr(denali, (uint32_t)cmd,
 					PIPELINE_ACCESS | op | page_count);
 
-			/* wait for command to be accepted
+			/*
+			 * wait for command to be accepted
 			 * can always use status0 bit as the
-			 * mask is identical for each
-			 * bank. */
+			 * mask is identical for each bank.
+			 */
 			irq_status = wait_for_irq(denali, irq_mask);
 
 			if (irq_status == 0) {
@@ -796,8 +831,10 @@ static int write_data_to_flash_mem(struct denali_nand_info *denali,
 {
 	uint32_t i = 0, *buf32;
 
-	/* verify that the len is a multiple of 4. see comment in
-	 * read_data_from_flash_mem() */
+	/*
+	 * verify that the len is a multiple of 4.
+	 * see comment in read_data_from_flash_mem()
+	 */
 	BUG_ON((len % 4) != 0);
 
 	/* write the data to the flash memory */
@@ -814,14 +851,12 @@ static int read_data_from_flash_mem(struct denali_nand_info *denali,
 {
 	uint32_t i = 0, *buf32;
 
-	/* we assume that len will be a multiple of 4, if not
-	 * it would be nice to know about it ASAP rather than
-	 * have random failures...
-	 * This assumption is based on the fact that this
-	 * function is designed to be used to read flash pages,
-	 * which are typically multiples of 4...
+	/*
+	 * we assume that len will be a multiple of 4, if not it would be nice
+	 * to know about it ASAP rather than have random failures...
+	 * This assumption is based on the fact that this function is designed
+	 * to be used to read flash pages, which are typically multiples of 4.
 	 */
-
 	BUG_ON((len % 4) != 0);
 
 	/* transfer the data from the flash */
@@ -873,16 +908,19 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 							DENALI_READ) == PASS) {
 		read_data_from_flash_mem(denali, buf, mtd->oobsize);
 
-		/* wait for command to be accepted
-		 * can always use status0 bit as the mask is identical for each
-		 * bank. */
+		/*
+		 * wait for command to be accepted
+		 * can always use status0 bit as the
+		 * mask is identical for each bank.
+		 */
 		irq_status = wait_for_irq(denali, irq_mask);
 
 		if (irq_status == 0)
 			dev_err(denali->dev, "page on OOB timeout %d\n",
 					denali->page);
 
-		/* We set the device back to MAIN_ACCESS here as I observed
+		/*
+		 * We set the device back to MAIN_ACCESS here as I observed
 		 * instability with the controller if you do a block erase
 		 * and the last transaction was a SPARE_ACCESS. Block erase
 		 * is reliable (according to the MTD test infrastructure)
@@ -894,7 +932,8 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
 	}
 }
 
-/* this function examines buffers to see if they contain data that
+/*
+ * this function examines buffers to see if they contain data that
  * indicate that the buffer is part of an erased region of flash.
  */
 static bool is_erased(uint8_t *buf, int len)
@@ -940,13 +979,14 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 			err_device = ECC_ERR_DEVICE(err_correction_info);
 
 			if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
-				/* If err_byte is larger than ECC_SECTOR_SIZE,
+				/*
+				 * If err_byte is larger than ECC_SECTOR_SIZE,
 				 * means error happened in OOB, so we ignore
 				 * it. It's no need for us to correct it
 				 * err_device is represented the NAND error
 				 * bits are happened in if there are more
 				 * than one NAND connected.
-				 * */
+				 */
 				if (err_byte < ECC_SECTOR_SIZE) {
 					int offset;
 					offset = (err_sector *
@@ -960,17 +1000,19 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 					bitflips++;
 				}
 			} else {
-				/* if the error is not correctable, need to
+				/*
+				 * if the error is not correctable, need to
 				 * look at the page to see if it is an erased
 				 * page. if so, then it's not a real ECC error
-				 * */
+				 */
 				check_erased_page = true;
 			}
 		} while (!ECC_LAST_ERR(err_correction_info));
-		/* Once handle all ecc errors, controller will triger
+		/*
+		 * Once handle all ecc errors, controller will triger
 		 * a ECC_TRANSACTION_DONE interrupt, so here just wait
 		 * for a while for this interrupt
-		 * */
+		 */
 		while (!(read_interrupt_status(denali) &
 				INTR_STATUS__ECC_TRANSACTION_DONE))
 			cpu_relax();
@@ -1013,12 +1055,14 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op)
 	/* 3. set memory low address bits 23:8 */
 	index_addr(denali, mode | ((uint16_t)addr << 8), 0x2300);
 
-	/* 4.  interrupt when complete, burst len = 64 bytes*/
+	/* 4. interrupt when complete, burst len = 64 bytes */
 	index_addr(denali, mode | 0x14000, 0x2400);
 }
 
-/* writes a page. user specifies type, and this function handles the
- * configuration details. */
+/*
+ * writes a page. user specifies type, and this function handles the
+ * configuration details.
+ */
 static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
 			const uint8_t *buf, bool raw_xfer)
 {
@@ -1031,8 +1075,8 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
 						INTR_STATUS__PROGRAM_FAIL;
 
-	/* if it is a raw xfer, we want to disable ecc, and send
-	 * the spare area.
+	/*
+	 * if it is a raw xfer, we want to disable ecc and send the spare area.
 	 * !raw_xfer - enable ecc
 	 * raw_xfer - transfer spare
 	 */
@@ -1073,27 +1117,33 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
 
 /* NAND core entry points */
 
-/* this is the callback that the NAND core calls to write a page. Since
+/*
+ * this is the callback that the NAND core calls to write a page. Since
  * writing a page with ECC or without is similar, all the work is done
  * by write_page above.
- * */
+ */
 static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 				const uint8_t *buf, int oob_required)
 {
-	/* for regular page writes, we let HW handle all the ECC
-	 * data written to the device. */
+	/*
+	 * for regular page writes, we let HW handle all the ECC
+	 * data written to the device.
+	 */
 	return write_page(mtd, chip, buf, false);
 }
 
-/* This is the callback that the NAND core calls to write a page without ECC.
+/*
+ * This is the callback that the NAND core calls to write a page without ECC.
  * raw access is similar to ECC page writes, so all the work is done in the
  * write_page() function above.
  */
 static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 					const uint8_t *buf, int oob_required)
 {
-	/* for raw page writes, we want to disable ECC and simply write
-	   whatever data is in the buffer. */
+	/*
+	 * for raw page writes, we want to disable ECC and simply write
+	 * whatever data is in the buffer.
+	 */
 	return write_page(mtd, chip, buf, true);
 }
 
@@ -1238,7 +1288,6 @@ static int denali_erase(struct mtd_info *mtd, int page)
 
 	uint32_t cmd = 0x0, irq_status = 0;
 
-	/* clear interrupts */
 	clear_interrupts(denali);
 
 	/* setup page read request for access type */
@@ -1268,10 +1317,11 @@ static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 	case NAND_CMD_READID:
 	case NAND_CMD_PARAM:
 		reset_buf(denali);
-		/*sometimes ManufactureId read from register is not right
+		/*
+		 * sometimes ManufactureId read from register is not right
 		 * e.g. some of Micron MT29F32G08QAA MLC NAND chips
 		 * So here we send READID cmd to NAND insteand
-		 * */
+		 */
 		addr = (uint32_t)MODE_11 | BANK(denali->flash_bank);
 		index_addr(denali, (uint32_t)addr | 0, 0x90);
 		index_addr(denali, (uint32_t)addr | 1, 0);
@@ -1331,11 +1381,12 @@ static void denali_ecc_hwctl(struct mtd_info *mtd, int mode)
 /* Initialization code to bring the device up to a known good state */
 static void denali_hw_init(struct denali_nand_info *denali)
 {
-	/* tell driver how many bit controller will skip before
+	/*
+	 * tell driver how many bit controller will skip before
 	 * writing ECC code in OOB, this register may be already
 	 * set by firmware. So we read this value out.
 	 * if this value is 0, just let it be.
-	 * */
+	 */
 	denali->bbtskipbytes = ioread32(denali->flash_reg +
 						SPARE_AREA_SKIP_BYTES);
 	detect_max_banks(denali);
@@ -1353,10 +1404,11 @@ static void denali_hw_init(struct denali_nand_info *denali)
 	denali_irq_init(denali);
 }
 
-/* Althogh controller spec said SLC ECC is forceb to be 4bit,
+/*
+ * Althogh controller spec said SLC ECC is forceb to be 4bit,
  * but denali controller in MRST only support 15bit and 8bit ECC
  * correction
- * */
+ */
 #define ECC_8BITS	14
 static struct nand_ecclayout nand_8bit_oob = {
 	.eccbytes = 14,
@@ -1396,13 +1448,16 @@ static void denali_drv_init(struct denali_nand_info *denali)
 	denali->idx = 0;
 
 	/* setup interrupt handler */
-	/* the completion object will be used to notify
-	 * the callee that the interrupt is done */
+	/*
+	 * the completion object will be used to notify
+	 * the callee that the interrupt is done
+	 */
 	init_completion(&denali->complete);
 
-	/* the spinlock will be used to synchronize the ISR
-	 * with any element that might be access shared
-	 * data (interrupt status) */
+	/*
+	 * the spinlock will be used to synchronize the ISR with any
+	 * element that might be access shared data (interrupt status)
+	 */
 	spin_lock_init(&denali->irq_lock);
 
 	/* indicate that MTD has not selected a valid bank yet */
@@ -1417,7 +1472,8 @@ int denali_init(struct denali_nand_info *denali)
 	int ret;
 
 	if (denali->platform == INTEL_CE4100) {
-		/* Due to a silicon limitation, we can only support
+		/*
+		 * Due to a silicon limitation, we can only support
 		 * ONFI timing mode 1 and below.
 		 */
 		if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
@@ -1436,8 +1492,10 @@ int denali_init(struct denali_nand_info *denali)
 	denali_hw_init(denali);
 	denali_drv_init(denali);
 
-	/* denali_isr register is done after all the hardware
-	 * initilization is finished*/
+	/*
+	 * denali_isr register is done after all the hardware
+	 * initilization is finished
+	 */
 	if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
 			DENALI_NAND_NAME, denali)) {
 		pr_err("Spectra: Unable to allocate IRQ\n");
@@ -1456,9 +1514,11 @@ int denali_init(struct denali_nand_info *denali)
 	denali->nand.read_byte = denali_read_byte;
 	denali->nand.waitfunc = denali_waitfunc;
 
-	/* scan for NAND devices attached to the controller
+	/*
+	 * scan for NAND devices attached to the controller
 	 * this is the first stage in a two step process to register
-	 * with the nand subsystem */
+	 * with the nand subsystem
+	 */
 	if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) {
 		ret = -ENXIO;
 		goto failed_req_irq;
@@ -1490,10 +1550,10 @@ int denali_init(struct denali_nand_info *denali)
 		goto failed_req_irq;
 	}
 
-	/* support for multi nand
-	 * MTD known nothing about multi nand,
-	 * so we should tell it the real pagesize
-	 * and anything necessery
+	/*
+	 * support for multi nand
+	 * MTD known nothing about multi nand, so we should tell it
+	 * the real pagesize and anything necessery
 	 */
 	denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
 	denali->nand.chipsize <<= (denali->devnum - 1);
@@ -1509,9 +1569,11 @@ int denali_init(struct denali_nand_info *denali)
 	denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
 	denali->bbtskipbytes *= denali->devnum;
 
-	/* second stage of the NAND scan
+	/*
+	 * second stage of the NAND scan
 	 * this stage requires information regarding ECC and
-	 * bad block management. */
+	 * bad block management.
+	 */
 
 	/* Bad block management */
 	denali->nand.bbt_td = &bbt_main_descr;
@@ -1522,7 +1584,8 @@ int denali_init(struct denali_nand_info *denali)
 	denali->nand.options |= NAND_SKIP_BBTSCAN;
 	denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
 
-	/* Denali Controller only support 15bit and 8bit ECC in MRST,
+	/*
+	 * Denali Controller only support 15bit and 8bit ECC in MRST,
 	 * so just let controller do 15bit ECC for MLC and 8bit ECC for
 	 * SLC if possible.
 	 * */
@@ -1558,18 +1621,20 @@ int denali_init(struct denali_nand_info *denali)
 		denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
 		denali->bbtskipbytes;
 
-	/* Let driver know the total blocks number and
-	 * how many blocks contained by each nand chip.
-	 * blksperchip will help driver to know how many
-	 * blocks is taken by FW.
-	 * */
+	/*
+	 * Let driver know the total blocks number and how many blocks
+	 * contained by each nand chip. blksperchip will help driver to
+	 * know how many blocks is taken by FW.
+	 */
 	denali->totalblks = denali->mtd.size >>
 				denali->nand.phys_erase_shift;
 	denali->blksperchip = denali->totalblks / denali->nand.numchips;
 
-	/* These functions are required by the NAND core framework, otherwise,
+	/*
+	 * These functions are required by the NAND core framework, otherwise,
 	 * the NAND core will assert. However, we don't need them, so we'll stub
-	 * them out. */
+	 * them out.
+	 */
 	denali->nand.ecc.calculate = denali_ecc_calculate;
 	denali->nand.ecc.correct = denali_ecc_correct;
 	denali->nand.ecc.hwctl = denali_ecc_hwctl;