extcon: gpio: Request gpio pin before modifying its state

Commit 338de0ca (extcon: gpio: Use gpio driver/chip debounce if supported)
introduced a call to gpio_set_debounce() before actually requesting the
respective gpio pin from the gpio subsystem.

The gpio subsystem expects that a gpio pin was requested before modifying its
state. Not doing so results in a warning from gpiolib, and the gpio pin is
auto-requested. This in turn causes the subsequent devm_gpio_request_one()
to fail. So devm_gpio_request_one() must be called prior to calling
gpio_set_debounce().

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

drivers/extcon/extcon-gpio.c

@@ -105,6 +105,12 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 	extcon_data->state_off = pdata->state_off;
 	if (pdata->state_on && pdata->state_off)
 		extcon_data->edev.print_state = extcon_gpio_print_state;
+
+	ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
+				    pdev->name);
+	if (ret < 0)
+		return ret;
+
 	if (pdata->debounce) {
 		ret = gpio_set_debounce(extcon_data->gpio,
 					pdata->debounce * 1000);
@@ -117,11 +123,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 	if (ret < 0)
 		return ret;
 
-	ret = devm_gpio_request_one(&pdev->dev, extcon_data->gpio, GPIOF_DIR_IN,
-				    pdev->name);
-	if (ret < 0)
-		goto err;
-
 	INIT_DELAYED_WORK(&extcon_data->work, gpio_extcon_work);
 
 	extcon_data->irq = gpio_to_irq(extcon_data->gpio);