Merge branch 'topic/dma' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-pxa

.gitignore

@@ -29,6 +29,7 @@ modules.builtin
 *.bz2
 *.lzma
 *.xz
+*.lz4
 *.lzo
 *.patch
 *.gcno

Documentation/ABI/testing/sysfs-driver-xen-blkback

@@ -0,0 +1,17 @@
+What:           /sys/module/xen_blkback/parameters/max_buffer_pages
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of free pages to keep in each block
+                backend buffer.
+
+What:           /sys/module/xen_blkback/parameters/max_persistent_grants
+Date:           March 2013
+KernelVersion:  3.11
+Contact:        Roger Pau Monné <roger.pau@citrix.com>
+Description:
+                Maximum number of grants to map persistently in
+                blkback. If the frontend tries to use more than
+                max_persistent_grants, the LRU kicks in and starts
+                removing 5% of max_persistent_grants every 100ms.

Documentation/ABI/testing/sysfs-driver-xen-blkfront

@@ -0,0 +1,10 @@
+What:           /sys/module/xen_blkfront/parameters/max
+Date:           June 2013
+KernelVersion:  3.11
+Contact:        Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Maximum number of segments that the frontend will negotiate
+                with the backend for indirect descriptors. The default value
+                is 32 - higher value means more potential throughput but more
+                memory usage. The backend picks the minimum of the frontend
+                and its default backend value.

Documentation/DocBook/device-drivers.tmpl

@@ -84,7 +84,7 @@ X!Iinclude/linux/kobject.h
 
      <sect1><title>Kernel utility functions</title>
 !Iinclude/linux/kernel.h
-!Ekernel/printk.c
+!Ekernel/printk/printk.c
 !Ekernel/panic.c
 !Ekernel/sys.c
 !Ekernel/rcupdate.c

Documentation/DocBook/media_api.tmpl

@@ -1,6 +1,6 @@
 <?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
-	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
 <!ENTITY % media-entities SYSTEM "./media-entities.tmpl"> %media-entities;
 <!ENTITY media-indices SYSTEM "./media-indices.tmpl">
 

Documentation/bcache.txt

@@ -46,29 +46,33 @@ you format your backing devices and cache device at the same time, you won't
 have to manually attach:
   make-bcache -B /dev/sda /dev/sdb -C /dev/sdc
 
-To make bcache devices known to the kernel, echo them to /sys/fs/bcache/register:
+bcache-tools now ships udev rules, and bcache devices are known to the kernel
+immediately.  Without udev, you can manually register devices like this:
 
   echo /dev/sdb > /sys/fs/bcache/register
   echo /dev/sdc > /sys/fs/bcache/register
 
-To register your bcache devices automatically, you could add something like
-this to an init script:
+Registering the backing device makes the bcache device show up in /dev; you can
+now format it and use it as normal. But the first time using a new bcache
+device, it'll be running in passthrough mode until you attach it to a cache.
+See the section on attaching.
 
-  echo /dev/sd* > /sys/fs/bcache/register_quiet
+The devices show up as:
 
-It'll look for bcache superblocks and ignore everything that doesn't have one.
+  /dev/bcache<N>
 
-Registering the backing device makes the bcache show up in /dev; you can now
-format it and use it as normal. But the first time using a new bcache device,
-it'll be running in passthrough mode until you attach it to a cache. See the
-section on attaching.
+As well as (with udev):
 
-The devices show up at /dev/bcacheN, and can be controlled via sysfs from
-/sys/block/bcacheN/bcache:
+  /dev/bcache/by-uuid/<uuid>
+  /dev/bcache/by-label/<label>
+
+To get started:
 
   mkfs.ext4 /dev/bcache0
   mount /dev/bcache0 /mnt
 
+You can control bcache devices through sysfs at /sys/block/bcache<N>/bcache .
+
 Cache devices are managed as sets; multiple caches per set isn't supported yet
 but will allow for mirroring of metadata and dirty data in the future. Your new
 cache set shows up as /sys/fs/bcache/<UUID>
@@ -80,11 +84,11 @@ must be attached to your cache set to enable caching. Attaching a backing
 device to a cache set is done thusly, with the UUID of the cache set in
 /sys/fs/bcache:
 
-  echo <UUID> > /sys/block/bcache0/bcache/attach
+  echo <CSET-UUID> > /sys/block/bcache0/bcache/attach
 
 This only has to be done once. The next time you reboot, just reregister all
 your bcache devices. If a backing device has data in a cache somewhere, the
-/dev/bcache# device won't be created until the cache shows up - particularly
+/dev/bcache<N> device won't be created until the cache shows up - particularly
 important if you have writeback caching turned on.
 
 If you're booting up and your cache device is gone and never coming back, you
@@ -191,6 +195,9 @@ want for getting the best possible numbers when benchmarking.
 
 SYSFS - BACKING DEVICE:
 
+Available at /sys/block/<bdev>/bcache, /sys/block/bcache*/bcache and
+(if attached) /sys/fs/bcache/<cset-uuid>/bdev*
+
 attach
   Echo the UUID of a cache set to this file to enable caching.
 
@@ -300,6 +307,8 @@ cache_readaheads
 
 SYSFS - CACHE SET:
 
+Available at /sys/fs/bcache/<cset-uuid>
+
 average_key_size
   Average data per key in the btree.
 
@@ -390,6 +399,8 @@ trigger_gc
 
 SYSFS - CACHE DEVICE:
 
+Available at /sys/block/<cdev>/bcache
+
 block_size
   Minimum granularity of writes - should match hardware sector size.
 

Documentation/cpu-hotplug.txt

@@ -267,8 +267,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and
 A: This is what you would need in your kernel code to receive notifications.
 
 	#include <linux/cpu.h>
-	static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
-					    unsigned long action, void *hcpu)
+	static int foobar_cpu_callback(struct notifier_block *nfb,
+				       unsigned long action, void *hcpu)
 	{
 		unsigned int cpu = (unsigned long)hcpu;
 
@@ -285,7 +285,7 @@ A: This is what you would need in your kernel code to receive notifications.
 		return NOTIFY_OK;
 	}
 
-	static struct notifier_block __cpuinitdata foobar_cpu_notifer =
+	static struct notifier_block foobar_cpu_notifer =
 	{
 	   .notifier_call = foobar_cpu_callback,
 	};

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -98,6 +98,7 @@ clocks and IDs.
 	fpm                  83
 	mpll_osc_sel         84
 	mpll_sel             85
+	spll_gate	     86
 
 Examples:
 

Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt

@@ -4,7 +4,7 @@
 Required properties :
 
  - reg             : Offset and length of the register set for the device
- - compatible      : Should be "marvell,mv64xxx-i2c"
+ - compatible      : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
  - interrupts      : The interrupt number
 
 Optional properties :

Documentation/devicetree/bindings/regulator/palmas-pmic.txt

@@ -31,9 +31,8 @@ Optional nodes:
 	       Optional sub-node properties:
 	       ti,warm-reset - maintain voltage during warm reset(boolean)
 	       ti,roof-floor - control voltage selection by pin(boolean)
-	       ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto,
+	       ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
 	       2 - eco, 3 - forced pwm
-	       ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
 	       ti,smps-range - OTP has the wrong range set for the hardware so override
 	       0 - low range, 1 - high range.
 
@@ -59,7 +58,6 @@ pmic {
 			ti,warm-reset;
 			ti,roof-floor;
 			ti,mode-sleep = <0>;
-			ti,tstep = <0>;
 			ti,smps-range = <1>;
 		};
 

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -26,6 +26,7 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
@@ -43,6 +44,7 @@ nxp	NXP Semiconductors
 onnn	ON Semiconductor Corp.
 picochip	Picochip Ltd
 powervr	PowerVR (deprecated, use img)
+qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm, Inc.
 ralink	Mediatek/Ralink Technology Corp.
 ramtron	Ramtron International

Documentation/ja_JP/HOWTO

@@ -11,14 +11,14 @@ for non English (read: Japanese) speakers and is not intended as a
 fork. So if you have any comments or updates for this file, please try
 to update the original English file first.
 
-Last Updated: 2011/03/31
+Last Updated: 2013/07/19
 ==================================
 これは、
-linux-2.6.38/Documentation/HOWTO
+linux-3.10/Documentation/HOWTO
 の和訳です。
 
-翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ >
-翻訳日： 2011/3/28
+翻訳団体： JF プロジェクト < http://linuxjf.sourceforge.jp/ >
+翻訳日： 2013/7/19
 翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com>
 校正者： 松倉さん <nbh--mats at nifty dot com>
          小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp>
@@ -245,7 +245,7 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
 自己参照方式で、索引がついた web 形式で、ソースコードを参照することが
 できます。この最新の素晴しいカーネルコードのリポジトリは以下で見つかり
 ます-
-	http://sosdg.org/~qiyong/lxr/
+	http://lxr.linux.no/+trees
 
 開発プロセス
 -----------------------
@@ -253,24 +253,24 @@ Linux カーネルソースツリーの中に含まれる、きれいにし、
 Linux カーネルの開発プロセスは現在幾つかの異なるメインカーネル「ブラン
 チ」と多数のサブシステム毎のカーネルブランチから構成されます。
 これらのブランチとは-
-  - メインの 2.6.x カーネルツリー
-  - 2.6.x.y -stable カーネルツリー
-  - 2.6.x -git カーネルパッチ
+  - メインの 3.x カーネルツリー
+  - 3.x.y -stable カーネルツリー
+  - 3.x -git カーネルパッチ
   - サブシステム毎のカーネルツリーとパッチ
-  - 統合テストのための 2.6.x -next カーネルツリー
+  - 統合テストのための 3.x -next カーネルツリー
 
-2.6.x カーネルツリー
+3.x カーネルツリー
 -----------------
 
-2.6.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
-の pub/linux/kernel/v2.6/ ディレクトリに存在します。この開発プロセスは
+3.x カーネルは Linus Torvalds によってメンテナンスされ、kernel.org
+の pub/linux/kernel/v3.x/ ディレクトリに存在します。この開発プロセスは
 以下のとおり-
 
   - 新しいカーネルがリリースされた直後に、2週間の特別期間が設けられ、
     この期間中に、メンテナ達は Linus に大きな差分を送ることができます。
     このような差分は通常 -next カーネルに数週間含まれてきたパッチです。
     大きな変更は git(カーネルのソース管理ツール、詳細は
-    http://git-scm.com/  参照) を使って送るのが好ましいやり方ですが、パッ
+    http://git-scm.com/ 参照) を使って送るのが好ましいやり方ですが、パッ
     チファイルの形式のまま送るのでも十分です。
 
   - 2週間後、-rc1 カーネルがリリースされ、この後にはカーネル全体の安定
@@ -302,20 +302,20 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
   実に認識されたバグの状況によりリリースされるのであり、前もって決めら
   れた計画によってリリースされるものではないからです。」
 
-2.6.x.y -stable カーネルツリー
+3.x.y -stable カーネルツリー
 ---------------------------
 
-バージョン番号が4つの数字に分かれているカーネルは -stable カーネルです。
-これには、2.6.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
+バージョン番号が3つの数字に分かれているカーネルは -stable カーネルです。
+これには、3.x カーネルで見つかったセキュリティ問題や重大な後戻りに対
 する比較的小さい重要な修正が含まれます。
 
 これは、開発/実験的バージョンのテストに協力することに興味が無く、
 最新の安定したカーネルを使いたいユーザに推奨するブランチです。
 
-もし、2.6.x.y カーネルが存在しない場合には、番号が一番大きい 2.6.x が
+もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が
 最新の安定版カーネルです。
 
-2.6.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
+3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必
 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ
 た問題がなければもう少し長くなることもあります。セキュリティ関連の問題
 の場合はこれに対してだいたいの場合、すぐにリリースがされます。
@@ -324,7 +324,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー
 イルにはどのような種類の変更が -stable ツリーに受け入れ可能か、またリ
 リースプロセスがどう動くかが記述されています。
 
-2.6.x -git パッチ
+3.x -git パッチ
 ------------------
 
 git リポジトリで管理されているLinus のカーネルツリーの毎日のスナップ
@@ -358,14 +358,14 @@ quilt シリーズとして公開されているパッチキューも使われ
 をつけることができます。大部分のこれらの patchwork のサイトは
 http://patchwork.kernel.org/ でリストされています。
 
-統合テストのための 2.6.x -next カーネルツリー
+統合テストのための 3.x -next カーネルツリー
 ---------------------------------------------
 
-サブシステムツリーの更新内容がメインラインの 2.6.x ツリーにマージされ
+サブシステムツリーの更新内容がメインラインの 3.x ツリーにマージされ
 る前に、それらは統合テストされる必要があります。この目的のため、実質的
 に全サブシステムツリーからほぼ毎日プルされてできる特別なテスト用のリ
 ポジトリが存在します-
-       http://git.kernel.org/?p=linux/kernel/git/sfr/linux-next.git
+       http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
        http://linux.f-seidel.de/linux-next/pmwiki/
 
 このやり方によって、-next カーネルは次のマージ機会でどんなものがメイン

Documentation/sysctl/net.txt

@@ -52,7 +52,7 @@ Default: 64
 
 busy_read
 ----------------
-Low latency busy poll timeout for socket reads. (needs CONFIG_NET_LL_RX_POLL)
+Low latency busy poll timeout for socket reads. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for packets on the device queue.
 This sets the default value of the SO_BUSY_POLL socket option.
 Can be set or overridden per socket by setting socket option SO_BUSY_POLL,
@@ -63,7 +63,7 @@ Default: 0 (off)
 
 busy_poll
 ----------------
-Low latency busy poll timeout for poll and select. (needs CONFIG_NET_LL_RX_POLL)
+Low latency busy poll timeout for poll and select. (needs CONFIG_NET_RX_BUSY_POLL)
 Approximate time in us to busy loop waiting for events.
 Recommended value depends on the number of sockets you poll on.
 For several sockets 50, for several hundreds 100.

MAINTAINERS

@@ -965,6 +965,12 @@ M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M:	Santosh Shilimkar <santosh.shilimkar@ti.com>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-keystone/
+
 ARM/LOGICPD PXA270 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1259,7 +1265,6 @@ F:	drivers/rtc/rtc-coh901331.c
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
 
 ARM/Ux500 ARM ARCHITECTURE
-M:	Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
@@ -1406,7 +1411,7 @@ ATHEROS ATH6KL WIRELESS DRIVER
 M:	Kalle Valo <kvalo@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath6kl.git
+T:	git git://github.com/kvalo/ath.git
 S:	Supported
 F:	drivers/net/wireless/ath/ath6kl/
 
@@ -1642,7 +1647,7 @@ S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BCACHE (BLOCK LAYER CACHE)
-M:	Kent Overstreet <koverstreet@google.com>
+M:	Kent Overstreet <kmo@daterainc.com>
 L:	linux-bcache@vger.kernel.org
 W:	http://bcache.evilpiepirate.org
 S:	Maintained:
@@ -2871,7 +2876,7 @@ F:	drivers/media/usb/dvb-usb-v2/dvb_usb*
 F:	drivers/media/usb/dvb-usb-v2/usb_urb.c
 
 DYNAMIC DEBUG
-M:	Jason Baron <jbaron@redhat.com>
+M:	Jason Baron <jbaron@akamai.com>
 S:	Maintained
 F:	lib/dynamic_debug.c
 F:	include/linux/dynamic_debug.h
@@ -3346,7 +3351,7 @@ F:	Documentation/firmware_class/
 F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
-FLASHSYSTEM DRIVER (IBM FlashSystem 70/80 PCI SSD Flash Card)
+FLASH ADAPTER DRIVER (IBM Flash Adapter 900GB Full Height PCI Flash Card)
 M:	Joshua Morris <josh.h.morris@us.ibm.com>
 M:	Philip Kelleher <pjk1939@linux.vnet.ibm.com>
 S:	Maintained
@@ -3622,11 +3627,9 @@ F:	drivers/isdn/gigaset/
 F:	include/uapi/linux/gigaset_dev.h
 
 GPIO SUBSYSTEM
-M:	Grant Likely <grant.likely@linaro.org>
 M:	Linus Walleij <linus.walleij@linaro.org>
 S:	Maintained
 L:	linux-gpio@vger.kernel.org
-T:	git git://git.secretlab.ca/git/linux-2.6.git
 F:	Documentation/gpio.txt
 F:	drivers/gpio/
 F:	include/linux/gpio*
@@ -4472,8 +4475,6 @@ F:	drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
-M:	Grant Likely <grant.likely@linaro.org>
-T:	git git://git.secretlab.ca/git/linux-2.6.git irqdomain/next
 S:	Maintained
 F:	Documentation/IRQ-domain.txt
 F:	include/linux/irqdomain.h
@@ -4990,7 +4991,7 @@ F:	arch/powerpc/platforms/44x/
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Unmaintained
+S:	Orphan
 F:	arch/powerpc/*/*virtex*
 F:	arch/powerpc/*/*/*virtex*
 
@@ -5886,7 +5887,7 @@ OMAP DEVICE TREE SUPPORT
 M:	Benoît Cousson <b-cousson@ti.com>
 M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
-L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
+L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	arch/arm/boot/dts/*omap*
 F:	arch/arm/boot/dts/*am3*
@@ -6050,17 +6051,28 @@ F:	drivers/i2c/busses/i2c-ocores.c
 OPEN FIRMWARE AND FLATTENED DEVICE TREE
 M:	Grant Likely <grant.likely@linaro.org>
 M:	Rob Herring <rob.herring@calxeda.com>
-L:	devicetree-discuss@lists.ozlabs.org (moderated for non-subscribers)
+L:	devicetree@vger.kernel.org
 W:	http://fdt.secretlab.ca
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
-F:	Documentation/devicetree
-F:	drivers/of
+F:	drivers/of/
 F:	include/linux/of*.h
-F:	scripts/dtc
+F:	scripts/dtc/
 K:	of_get_property
 K:	of_match_table
 
+OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
+M:	Rob Herring <rob.herring@calxeda.com>
+M:	Pawel Moll <pawel.moll@arm.com>
+M:	Mark Rutland <mark.rutland@arm.com>
+M:	Stephen Warren <swarren@wwwdotorg.org>
+M:	Ian Campbell <ian.campbell@citrix.com>
+L:	devicetree@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/
+F:	arch/*/boot/dts/
+F:	include/dt-bindings/
+
 OPENRISC ARCHITECTURE
 M:	Jonas Bonn <jonas@southpole.se>
 W:	http://openrisc.net
@@ -6719,6 +6731,14 @@ T:	git git://linuxtv.org/anttip/media_tree.git
 S:	Maintained
 F:	drivers/media/tuners/qt1010*
 
+QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
+M:	Kalle Valo <kvalo@qca.qualcomm.com>
+L:	ath10k@lists.infradead.org
+W:	http://wireless.kernel.org/en/users/Drivers/ath10k
+T:	git git://github.com/kvalo/ath.git
+S:	Supported
+F:	drivers/net/wireless/ath/ath10k/
+
 QUALCOMM HEXAGON ARCHITECTURE
 M:	Richard Kuo <rkuo@codeaurora.org>
 L:	linux-hexagon@vger.kernel.org
@@ -7746,7 +7766,6 @@ F:	drivers/clk/spear/
 
 SPI SUBSYSTEM
 M:	Mark Brown <broonie@kernel.org>
-M:	Grant Likely <grant.likely@linaro.org>
 L:	linux-spi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git
 Q:	http://patchwork.kernel.org/project/spi-devel-general/list/
@@ -7812,7 +7831,7 @@ F:	drivers/staging/asus_oled/
 
 STAGING - COMEDI
 M:	Ian Abbott <abbotti@mev.co.uk>
-M:	Mori Hess <fmhess@users.sourceforge.net>
+M:	H Hartley Sweeten <hsweeten@visionengravers.com>
 S:	Odd Fixes
 F:	drivers/staging/comedi/
 
@@ -8264,7 +8283,7 @@ S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TI WILINK WIRELESS DRIVERS
-M:	Luciano Coelho <coelho@ti.com>
+M:	Luciano Coelho <luca@coelho.fi>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 W:	http://wireless.kernel.org/en/users/Drivers/wl1251
@@ -8650,6 +8669,11 @@ T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	sound/usb/midi.*
 
+USB NETWORKING DRIVERS
+L:	linux-usb@vger.kernel.org
+S:	Odd Fixes
+F:	drivers/net/usb/
+
 USB OHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
@@ -9288,7 +9312,7 @@ S:	Maintained
 F:	drivers/net/ethernet/xilinx/xilinx_axienet*
 
 XILINX SYSTEMACE DRIVER
-S:	Unmaintained
+S:	Orphan
 F:	drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 11
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc5
 NAME = Linux for Workgroups
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -15,6 +15,7 @@ config ALPHA
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_STRNCPY_FROM_USER

arch/alpha/include/asm/atomic.h

@@ -186,17 +186,24 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
  */
 static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
 {
-	int c, old;
-	c = atomic_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c;
+	int c, new, old;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldl_l	%[old],%[mem]\n"
+	"	cmpeq	%[old],%[u],%[c]\n"
+	"	addl	%[old],%[a],%[new]\n"
+	"	bne	%[c],2f\n"
+	"	stl_c	%[new],%[mem]\n"
+	"	beq	%[new],3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [old] "=&r"(old), [new] "=&r"(new), [c] "=&r"(c)
+	: [mem] "m"(*v), [a] "rI"(a), [u] "rI"((long)u)
+	: "memory");
+	smp_mb();
+	return old;
 }
 
 
@@ -207,21 +214,56 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u)
  * @u: ...unless v is equal to u.
  *
  * Atomically adds @a to @v, so long as it was not @u.
- * Returns the old value of @v.
+ * Returns true iff @v was not @u.
  */
 static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
 {
-	long c, old;
-	c = atomic64_read(v);
-	for (;;) {
-		if (unlikely(c == (u)))
-			break;
-		old = atomic64_cmpxchg((v), c, c + (a));
-		if (likely(old == c))
-			break;
-		c = old;
-	}
-	return c != (u);
+	long c, tmp;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldq_l	%[tmp],%[mem]\n"
+	"	cmpeq	%[tmp],%[u],%[c]\n"
+	"	addq	%[tmp],%[a],%[tmp]\n"
+	"	bne	%[c],2f\n"
+	"	stq_c	%[tmp],%[mem]\n"
+	"	beq	%[tmp],3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [tmp] "=&r"(tmp), [c] "=&r"(c)
+	: [mem] "m"(*v), [a] "rI"(a), [u] "rI"(u)
+	: "memory");
+	smp_mb();
+	return !c;
+}
+
+/*
+ * atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static inline long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long old, tmp;
+	smp_mb();
+	__asm__ __volatile__(
+	"1:	ldq_l	%[old],%[mem]\n"
+	"	subq	%[old],1,%[tmp]\n"
+	"	ble	%[old],2f\n"
+	"	stq_c	%[tmp],%[mem]\n"
+	"	beq	%[tmp],3f\n"
+	"2:\n"
+	".subsection 2\n"
+	"3:	br	1b\n"
+	".previous"
+	: [old] "=&r"(old), [tmp] "=&r"(tmp)
+	: [mem] "m"(*v)
+	: "memory");
+	smp_mb();
+	return old - 1;
 }
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)

arch/alpha/include/asm/param.h

@@ -3,7 +3,9 @@
 
 #include <uapi/asm/param.h>
 
-#define HZ		CONFIG_HZ
-#define USER_HZ		HZ
-# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+# undef HZ
+# define HZ		CONFIG_HZ
+# define USER_HZ	1024
+# define CLOCKS_PER_SEC	USER_HZ	/* frequency at which times() counts */
+
 #endif /* _ASM_ALPHA_PARAM_H */

arch/alpha/include/asm/spinlock.h

@@ -168,8 +168,4 @@ static inline void arch_write_unlock(arch_rwlock_t * lock)
 #define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
 #define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
 
-#define arch_spin_relax(lock)	cpu_relax()
-#define arch_read_relax(lock)	cpu_relax()
-#define arch_write_relax(lock)	cpu_relax()
-
 #endif /* _ALPHA_SPINLOCK_H */

arch/alpha/include/asm/unistd.h

@@ -3,8 +3,7 @@
 
 #include <uapi/asm/unistd.h>
 
-
-#define NR_SYSCALLS			506
+#define NR_SYSCALLS			508
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64

arch/alpha/include/uapi/asm/param.h

@@ -1,13 +1,7 @@
 #ifndef _UAPI_ASM_ALPHA_PARAM_H
 #define _UAPI_ASM_ALPHA_PARAM_H
 
-/* ??? Gross.  I don't want to parameterize this, and supposedly the
-   hardware ignores reprogramming.  We also need userland buy-in to the 
-   change in HZ, since this is visible in the wait4 resources etc.  */
-
-#ifndef __KERNEL__
 #define HZ		1024
-#endif
 
 #define EXEC_PAGESIZE	8192
 
@@ -17,5 +11,4 @@
 
 #define MAXHOSTNAMELEN	64	/* max length of hostname */
 
-
 #endif /* _UAPI_ASM_ALPHA_PARAM_H */

arch/alpha/include/uapi/asm/unistd.h

@@ -467,5 +467,7 @@
 #define __NR_sendmmsg			503
 #define __NR_process_vm_readv		504
 #define __NR_process_vm_writev		505
+#define __NR_kcmp			506
+#define __NR_finit_module		507
 
 #endif /* _UAPI_ALPHA_UNISTD_H */

arch/alpha/kernel/entry.S

@@ -12,11 +12,32 @@
 
 	.text
 	.set noat
+	.cfi_sections	.debug_frame
 
 /* Stack offsets.  */
 #define SP_OFF			184
 #define SWITCH_STACK_SIZE	320
 
+.macro	CFI_START_OSF_FRAME	func
+	.align	4
+	.globl	\func
+	.type	\func,@function
+\func:
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
+	.cfi_rel_offset	$16, 24
+	.cfi_rel_offset	$17, 32
+	.cfi_rel_offset	$18, 40
+.endm
+
+.macro	CFI_END_OSF_FRAME	func
+	.cfi_endproc
+	.size	\func, . - \func
+.endm
+
 /*
  * This defines the normal kernel pt-regs layout.
  *
@@ -27,100 +48,158 @@
  * the palcode-provided values are available to the signal handler.
  */
 
-#define SAVE_ALL			\
-	subq	$sp, SP_OFF, $sp;	\
-	stq	$0, 0($sp);		\
-	stq	$1, 8($sp);		\
-	stq	$2, 16($sp);		\
-	stq	$3, 24($sp);		\
-	stq	$4, 32($sp);		\
-	stq	$28, 144($sp);		\
-	lda	$2, alpha_mv;		\
-	stq	$5, 40($sp);		\
-	stq	$6, 48($sp);		\
-	stq	$7, 56($sp);		\
-	stq	$8, 64($sp);		\
-	stq	$19, 72($sp);		\
-	stq	$20, 80($sp);		\
-	stq	$21, 88($sp);		\
-	ldq	$2, HAE_CACHE($2);	\
-	stq	$22, 96($sp);		\
-	stq	$23, 104($sp);		\
-	stq	$24, 112($sp);		\
-	stq	$25, 120($sp);		\
-	stq	$26, 128($sp);		\
-	stq	$27, 136($sp);		\
-	stq	$2, 152($sp);		\
-	stq	$16, 160($sp);		\
-	stq	$17, 168($sp);		\
+.macro	SAVE_ALL
+	subq	$sp, SP_OFF, $sp
+	.cfi_adjust_cfa_offset	SP_OFF
+	stq	$0, 0($sp)
+	stq	$1, 8($sp)
+	stq	$2, 16($sp)
+	stq	$3, 24($sp)
+	stq	$4, 32($sp)
+	stq	$28, 144($sp)
+	.cfi_rel_offset	$0, 0
+	.cfi_rel_offset $1, 8
+	.cfi_rel_offset	$2, 16
+	.cfi_rel_offset	$3, 24
+	.cfi_rel_offset	$4, 32
+	.cfi_rel_offset	$28, 144
+	lda	$2, alpha_mv
+	stq	$5, 40($sp)
+	stq	$6, 48($sp)
+	stq	$7, 56($sp)
+	stq	$8, 64($sp)
+	stq	$19, 72($sp)
+	stq	$20, 80($sp)
+	stq	$21, 88($sp)
+	ldq	$2, HAE_CACHE($2)
+	stq	$22, 96($sp)
+	stq	$23, 104($sp)
+	stq	$24, 112($sp)
+	stq	$25, 120($sp)
+	stq	$26, 128($sp)
+	stq	$27, 136($sp)
+	stq	$2, 152($sp)
+	stq	$16, 160($sp)
+	stq	$17, 168($sp)
 	stq	$18, 176($sp)
+	.cfi_rel_offset	$5, 40
+	.cfi_rel_offset	$6, 48
+	.cfi_rel_offset	$7, 56
+	.cfi_rel_offset	$8, 64
+	.cfi_rel_offset $19, 72
+	.cfi_rel_offset	$20, 80
+	.cfi_rel_offset	$21, 88
+	.cfi_rel_offset $22, 96
+	.cfi_rel_offset	$23, 104
+	.cfi_rel_offset	$24, 112
+	.cfi_rel_offset	$25, 120
+	.cfi_rel_offset	$26, 128
+	.cfi_rel_offset	$27, 136
+.endm
 
-#define RESTORE_ALL			\
-	lda	$19, alpha_mv;		\
-	ldq	$0, 0($sp);		\
-	ldq	$1, 8($sp);		\
-	ldq	$2, 16($sp);		\
-	ldq	$3, 24($sp);		\
-	ldq	$21, 152($sp);		\
-	ldq	$20, HAE_CACHE($19);	\
-	ldq	$4, 32($sp);		\
-	ldq	$5, 40($sp);		\
-	ldq	$6, 48($sp);		\
-	ldq	$7, 56($sp);		\
-	subq	$20, $21, $20;		\
-	ldq	$8, 64($sp);		\
-	beq	$20, 99f;		\
-	ldq	$20, HAE_REG($19);	\
-	stq	$21, HAE_CACHE($19);	\
-	stq	$21, 0($20);		\
-99:;					\
-	ldq	$19, 72($sp);		\
-	ldq	$20, 80($sp);		\
-	ldq	$21, 88($sp);		\
-	ldq	$22, 96($sp);		\
-	ldq	$23, 104($sp);		\
-	ldq	$24, 112($sp);		\
-	ldq	$25, 120($sp);		\
-	ldq	$26, 128($sp);		\
-	ldq	$27, 136($sp);		\
-	ldq	$28, 144($sp);		\
+.macro	RESTORE_ALL
+	lda	$19, alpha_mv
+	ldq	$0, 0($sp)
+	ldq	$1, 8($sp)
+	ldq	$2, 16($sp)
+	ldq	$3, 24($sp)
+	ldq	$21, 152($sp)
+	ldq	$20, HAE_CACHE($19)
+	ldq	$4, 32($sp)
+	ldq	$5, 40($sp)
+	ldq	$6, 48($sp)
+	ldq	$7, 56($sp)
+	subq	$20, $21, $20
+	ldq	$8, 64($sp)
+	beq	$20, 99f
+	ldq	$20, HAE_REG($19)
+	stq	$21, HAE_CACHE($19)
+	stq	$21, 0($20)
+99:	ldq	$19, 72($sp)
+	ldq	$20, 80($sp)
+	ldq	$21, 88($sp)
+	ldq	$22, 96($sp)
+	ldq	$23, 104($sp)
+	ldq	$24, 112($sp)
+	ldq	$25, 120($sp)
+	ldq	$26, 128($sp)
+	ldq	$27, 136($sp)
+	ldq	$28, 144($sp)
 	addq	$sp, SP_OFF, $sp
+	.cfi_restore	$0
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_adjust_cfa_offset	-SP_OFF
+.endm
+
+.macro	DO_SWITCH_STACK
+	bsr	$1, do_switch_stack
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
+	/* We don't really care about the FP registers for debugging.  */
+.endm
+
+.macro	UNDO_SWITCH_STACK
+	bsr	$1, undo_switch_stack
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-SWITCH_STACK_SIZE
+.endm
 
 /*
  * Non-syscall kernel entry points.
  */
 
-	.align	4
-	.globl	entInt
-	.ent	entInt
-entInt:
+CFI_START_OSF_FRAME entInt
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $19
 	jsr	$31, do_entInt
-.end entInt
+CFI_END_OSF_FRAME entInt
 
-	.align	4
-	.globl	entArith
-	.ent	entArith
-entArith:
+CFI_START_OSF_FRAME entArith
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $18
 	jsr	$31, do_entArith
-.end entArith
+CFI_END_OSF_FRAME entArith
 
-	.align	4
-	.globl	entMM
-	.ent	entMM
-entMM:
+CFI_START_OSF_FRAME entMM
 	SAVE_ALL
 /* save $9 - $15 so the inline exception code can manipulate them.  */
 	subq	$sp, 56, $sp
+	.cfi_adjust_cfa_offset	56
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -128,6 +207,13 @@ entMM:
 	stq	$13, 32($sp)
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
 	addq	$sp, 56, $19
 /* handle the fault */
 	lda	$8, 0x3fff
@@ -142,28 +228,33 @@ entMM:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	addq	$sp, 56, $sp
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
 /* finish up the syscall as normal.  */
 	br	ret_from_sys_call
-.end entMM
+CFI_END_OSF_FRAME entMM
 
-	.align	4
-	.globl	entIF
-	.ent	entIF
-entIF:
+CFI_START_OSF_FRAME entIF
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $17
 	jsr	$31, do_entIF
-.end entIF
+CFI_END_OSF_FRAME entIF
 
-	.align	4
-	.globl	entUna
-	.ent	entUna
-entUna:
+CFI_START_OSF_FRAME entUna
 	lda	$sp, -256($sp)
+	.cfi_adjust_cfa_offset	256
 	stq	$0, 0($sp)
+	.cfi_rel_offset	$0, 0
+	.cfi_remember_state
 	ldq	$0, 256($sp)	/* get PS */
 	stq	$1, 8($sp)
 	stq	$2, 16($sp)
@@ -195,6 +286,32 @@ entUna:
 	stq	$28, 224($sp)
 	mov	$sp, $19
 	stq	$gp, 232($sp)
+	.cfi_rel_offset	$1, 1*8
+	.cfi_rel_offset	$2, 2*8
+	.cfi_rel_offset	$3, 3*8
+	.cfi_rel_offset	$4, 4*8
+	.cfi_rel_offset	$5, 5*8
+	.cfi_rel_offset	$6, 6*8
+	.cfi_rel_offset	$7, 7*8
+	.cfi_rel_offset	$8, 8*8
+	.cfi_rel_offset	$9, 9*8
+	.cfi_rel_offset	$10, 10*8
+	.cfi_rel_offset	$11, 11*8
+	.cfi_rel_offset	$12, 12*8
+	.cfi_rel_offset	$13, 13*8
+	.cfi_rel_offset	$14, 14*8
+	.cfi_rel_offset	$15, 15*8
+	.cfi_rel_offset	$19, 19*8
+	.cfi_rel_offset	$20, 20*8
+	.cfi_rel_offset	$21, 21*8
+	.cfi_rel_offset	$22, 22*8
+	.cfi_rel_offset	$23, 23*8
+	.cfi_rel_offset	$24, 24*8
+	.cfi_rel_offset	$25, 25*8
+	.cfi_rel_offset	$26, 26*8
+	.cfi_rel_offset	$27, 27*8
+	.cfi_rel_offset	$28, 28*8
+	.cfi_rel_offset	$29, 29*8
 	lda	$8, 0x3fff
 	stq	$31, 248($sp)
 	bic	$sp, $8, $8
@@ -228,16 +345,45 @@ entUna:
 	ldq	$28, 224($sp)
 	ldq	$gp, 232($sp)
 	lda	$sp, 256($sp)
+	.cfi_restore	$1
+	.cfi_restore	$2
+	.cfi_restore	$3
+	.cfi_restore	$4
+	.cfi_restore	$5
+	.cfi_restore	$6
+	.cfi_restore	$7
+	.cfi_restore	$8
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_restore	$19
+	.cfi_restore	$20
+	.cfi_restore	$21
+	.cfi_restore	$22
+	.cfi_restore	$23
+	.cfi_restore	$24
+	.cfi_restore	$25
+	.cfi_restore	$26
+	.cfi_restore	$27
+	.cfi_restore	$28
+	.cfi_restore	$29
+	.cfi_adjust_cfa_offset	-256
 	call_pal PAL_rti
-.end entUna
 
 	.align	4
-	.ent	entUnaUser
 entUnaUser:
+	.cfi_restore_state
 	ldq	$0, 0($sp)	/* restore original $0 */
 	lda	$sp, 256($sp)	/* pop entUna's stack frame */
+	.cfi_restore	$0
+	.cfi_adjust_cfa_offset	-256
 	SAVE_ALL		/* setup normal kernel stack */
 	lda	$sp, -56($sp)
+	.cfi_adjust_cfa_offset	56
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -245,6 +391,13 @@ entUnaUser:
 	stq	$13, 32($sp)
 	stq	$14, 40($sp)
 	stq	$15, 48($sp)
+	.cfi_rel_offset	$9, 0
+	.cfi_rel_offset	$10, 8
+	.cfi_rel_offset	$11, 16
+	.cfi_rel_offset	$12, 24
+	.cfi_rel_offset	$13, 32
+	.cfi_rel_offset	$14, 40
+	.cfi_rel_offset	$15, 48
 	lda	$8, 0x3fff
 	addq	$sp, 56, $19
 	bic	$sp, $8, $8
@@ -257,20 +410,25 @@ entUnaUser:
 	ldq	$14, 40($sp)
 	ldq	$15, 48($sp)
 	lda	$sp, 56($sp)
+	.cfi_restore	$9
+	.cfi_restore	$10
+	.cfi_restore	$11
+	.cfi_restore	$12
+	.cfi_restore	$13
+	.cfi_restore	$14
+	.cfi_restore	$15
+	.cfi_adjust_cfa_offset	-56
 	br	ret_from_sys_call
-.end entUnaUser
+CFI_END_OSF_FRAME entUna
 
-	.align	4
-	.globl	entDbg
-	.ent	entDbg
-entDbg:
+CFI_START_OSF_FRAME entDbg
 	SAVE_ALL
 	lda	$8, 0x3fff
 	lda	$26, ret_from_sys_call
 	bic	$sp, $8, $8
 	mov	$sp, $16
 	jsr	$31, do_entDbg
-.end entDbg
+CFI_END_OSF_FRAME entDbg
 
 /*
  * The system call entry point is special.  Most importantly, it looks
@@ -285,8 +443,12 @@ entDbg:
 
 	.align	4
 	.globl	entSys
-	.globl	ret_from_sys_call
-	.ent	entSys
+	.type	entSys, @function
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa	$sp, 48
+	.cfi_rel_offset	64, 8
+	.cfi_rel_offset	$gp, 16
 entSys:
 	SAVE_ALL
 	lda	$8, 0x3fff
@@ -300,6 +462,9 @@ entSys:
 	stq	$17, SP_OFF+32($sp)
 	s8addq	$0, $5, $5
 	stq	$18, SP_OFF+40($sp)
+	.cfi_rel_offset	$16, SP_OFF+24
+	.cfi_rel_offset	$17, SP_OFF+32
+	.cfi_rel_offset	$18, SP_OFF+40
 	blbs	$3, strace
 	beq	$4, 1f
 	ldq	$27, 0($5)
@@ -310,6 +475,7 @@ entSys:
 	stq	$31, 72($sp)		/* a3=0 => no error */
 
 	.align	4
+	.globl	ret_from_sys_call
 ret_from_sys_call:
 	cmovne	$26, 0, $18		/* $18 = 0 => non-restartable */
 	ldq	$0, SP_OFF($sp)
@@ -324,10 +490,12 @@ ret_to_user:
 	and	$17, _TIF_WORK_MASK, $2
 	bne	$2, work_pending
 restore_all:
+	.cfi_remember_state
 	RESTORE_ALL
 	call_pal PAL_rti
 
 ret_to_kernel:
+	.cfi_restore_state
 	lda	$16, 7
 	call_pal PAL_swpipl
 	br restore_all
@@ -356,7 +524,6 @@ $ret_success:
 	stq	$0, 0($sp)
 	stq	$31, 72($sp)	/* a3=0 => no error */
 	br	ret_from_sys_call
-.end entSys
 
 /*
  * Do all cleanup when returning from all interrupts and system calls.
@@ -370,7 +537,7 @@ $ret_success:
  */
 
 	.align	4
-	.ent	work_pending
+	.type	work_pending, @function
 work_pending:
 	and	$17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2
 	bne	$2, $work_notifysig
@@ -387,23 +554,22 @@ $work_resched:
 
 $work_notifysig:
 	mov	$sp, $16
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, do_work_pending
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	br	restore_all
-.end work_pending
 
 /*
  * PTRACE syscall handler
  */
 
 	.align	4
-	.ent	strace
+	.type	strace, @function
 strace:
 	/* set up signal stack, call syscall_trace */
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_enter /* returns the syscall number */
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 
 	/* get the arguments back.. */
 	ldq	$16, SP_OFF+24($sp)
@@ -431,9 +597,9 @@ ret_from_straced:
 $strace_success:
 	stq	$0, 0($sp)		/* save return value */
 
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	jsr	$26, syscall_trace_leave
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	br	$31, ret_from_sys_call
 
 	.align	3
@@ -447,26 +613,31 @@ $strace_error:
 	stq	$0, 0($sp)
 	stq	$1, 72($sp)	/* a3 for return */
 
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	mov	$18, $9		/* save old syscall number */
 	mov	$19, $10	/* save old a3 */
 	jsr	$26, syscall_trace_leave
 	mov	$9, $18
 	mov	$10, $19
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 
 	mov	$31, $26	/* tell "ret_from_sys_call" we can restart */
 	br	ret_from_sys_call
-.end strace
+CFI_END_OSF_FRAME entSys
 
 /*
  * Save and restore the switch stack -- aka the balance of the user context.
  */
 
 	.align	4
-	.ent	do_switch_stack
+	.type	do_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_return_column 64
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
 do_switch_stack:
 	lda	$sp, -SWITCH_STACK_SIZE($sp)
+	.cfi_adjust_cfa_offset	SWITCH_STACK_SIZE
 	stq	$9, 0($sp)
 	stq	$10, 8($sp)
 	stq	$11, 16($sp)
@@ -510,10 +681,14 @@ do_switch_stack:
 	stt	$f0, 312($sp)	# save fpcr in slot of $f31
 	ldt	$f0, 64($sp)	# dont let "do_switch_stack" change fp state.
 	ret	$31, ($1), 1
-.end do_switch_stack
+	.cfi_endproc
+	.size	do_switch_stack, .-do_switch_stack
 
 	.align	4
-	.ent	undo_switch_stack
+	.type	undo_switch_stack, @function
+	.cfi_startproc simple
+	.cfi_def_cfa $sp, 0
+	.cfi_register 64, $1
 undo_switch_stack:
 	ldq	$9, 0($sp)
 	ldq	$10, 8($sp)
@@ -558,7 +733,8 @@ undo_switch_stack:
 	ldt	$f30, 304($sp)
 	lda	$sp, SWITCH_STACK_SIZE($sp)
 	ret	$31, ($1), 1
-.end undo_switch_stack
+	.cfi_endproc
+	.size	undo_switch_stack, .-undo_switch_stack
 
 /*
  * The meat of the context switch code.
@@ -566,17 +742,18 @@ undo_switch_stack:
 
 	.align	4
 	.globl	alpha_switch_to
-	.ent	alpha_switch_to
+	.type	alpha_switch_to, @function
+	.cfi_startproc
 alpha_switch_to:
-	.prologue 0
-	bsr	$1, do_switch_stack
+	DO_SWITCH_STACK
 	call_pal PAL_swpctx
 	lda	$8, 0x3fff
-	bsr	$1, undo_switch_stack
+	UNDO_SWITCH_STACK
 	bic	$sp, $8, $8
 	mov	$17, $0
 	ret
-.end alpha_switch_to
+	.cfi_endproc
+	.size	alpha_switch_to, .-alpha_switch_to
 
 /*
  * New processes begin life here.

arch/alpha/kernel/irq_alpha.c

@@ -236,7 +236,7 @@ void __init
 init_rtc_irq(void)
 {
 	irq_set_chip_and_handler_name(RTC_IRQ, &dummy_irq_chip,
-				      handle_simple_irq, "RTC");
+				      handle_percpu_irq, "RTC");
 	setup_irq(RTC_IRQ, &timer_irqaction);
 }
 

arch/alpha/kernel/smp.c

@@ -116,7 +116,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __cpuinit
+void
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -194,7 +194,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __cpuinit
+static void
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -264,9 +264,10 @@ recv_secondary_console_msg(void)
 		if (cnt <= 0 || cnt >= 80)
 			strcpy(buf, "<<< BOGUS MSG >>>");
 		else {
-			cp1 = (char *) &cpu->ipc_buffer[11];
+			cp1 = (char *) &cpu->ipc_buffer[1];
 			cp2 = buf;
-			strcpy(cp2, cp1);
+			memcpy(cp2, cp1, cnt);
+			cp2[cnt] = '\0';
 			
 			while ((cp2 = strchr(cp2, '\r')) != 0) {
 				*cp2 = ' ';
@@ -285,7 +286,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __cpuinit
+static int
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;
@@ -356,7 +357,7 @@ secondary_cpu_start(int cpuid, struct task_struct *idle)
 /*
  * Bring one cpu online.
  */
-static int __cpuinit
+static int
 smp_boot_one_cpu(int cpuid, struct task_struct *idle)
 {
 	unsigned long timeout;
@@ -472,7 +473,7 @@ smp_prepare_boot_cpu(void)
 {
 }
 
-int __cpuinit
+int
 __cpu_up(unsigned int cpu, struct task_struct *tidle)
 {
 	smp_boot_one_cpu(cpu, tidle);

arch/alpha/kernel/sys_dp264.c

@@ -190,9 +190,6 @@ static struct irq_chip clipper_irq_type = {
 static void
 dp264_device_interrupt(unsigned long vector)
 {
-#if 1
-	printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n");
-#else
 	unsigned long pld;
 	unsigned int i;
 
@@ -210,12 +207,7 @@ dp264_device_interrupt(unsigned long vector)
 			isa_device_interrupt(vector);
 		else
 			handle_irq(16 + i);
-#if 0
-		TSUNAMI_cchip->dir0.csr = 1UL << i; mb();
-		tmp = TSUNAMI_cchip->dir0.csr;
-#endif
 	}
-#endif
 }
 
 static void 

arch/alpha/kernel/sys_marvel.c

@@ -317,8 +317,9 @@ marvel_init_irq(void)
 }
 
 static int 
-marvel_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+marvel_map_irq(const struct pci_dev *cdev, u8 slot, u8 pin)
 {
+	struct pci_dev *dev = (struct pci_dev *)cdev;
 	struct pci_controller *hose = dev->sysdata;
 	struct io7_port *io7_port = hose->sysdata;
 	struct io7 *io7 = io7_port->io7;

arch/alpha/kernel/systbls.S

@@ -524,6 +524,8 @@ sys_call_table:
 	.quad sys_sendmmsg
 	.quad sys_process_vm_readv
 	.quad sys_process_vm_writev		/* 505 */
+	.quad sys_kcmp
+	.quad sys_finit_module
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/kernel/time.c

@@ -105,9 +105,7 @@ void arch_irq_work_raise(void)
 
 static inline __u32 rpcc(void)
 {
-    __u32 result;
-    asm volatile ("rpcc %0" : "=r"(result));
-    return result;
+	return __builtin_alpha_rpcc();
 }
 
 int update_persistent_clock(struct timespec now)

arch/alpha/kernel/traps.c

@@ -32,7 +32,7 @@
 
 static int opDEC_fix;
 
-static void __cpuinit
+static void
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -66,8 +66,8 @@ dik_show_regs(struct pt_regs *regs, unsigned long *r9_15)
 {
 	printk("pc = [<%016lx>]  ra = [<%016lx>]  ps = %04lx    %s\n",
 	       regs->pc, regs->r26, regs->ps, print_tainted());
-	print_symbol("pc is at %s\n", regs->pc);
-	print_symbol("ra is at %s\n", regs->r26 );
+	printk("pc is at %pSR\n", (void *)regs->pc);
+	printk("ra is at %pSR\n", (void *)regs->r26);
 	printk("v0 = %016lx  t0 = %016lx  t1 = %016lx\n",
 	       regs->r0, regs->r1, regs->r2);
 	printk("t2 = %016lx  t3 = %016lx  t4 = %016lx\n",
@@ -132,9 +132,7 @@ dik_show_trace(unsigned long *sp)
 			continue;
 		if (tmp >= (unsigned long) &_etext)
 			continue;
-		printk("[<%lx>]", tmp);
-		print_symbol(" %s", tmp);
-		printk("\n");
+		printk("[<%lx>] %pSR\n", tmp, (void *)tmp);
 		if (i > 40) {
 			printk(" ...");
 			break;
@@ -1059,7 +1057,7 @@ give_sigbus:
 	return;
 }
 
-void __cpuinit
+void
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

arch/arc/include/asm/entry.h

@@ -38,6 +38,7 @@
 #include <asm/ptrace.h>
 #include <asm/processor.h>	/* For VMALLOC_START */
 #include <asm/thread_info.h>	/* For THREAD_SIZE */
+#include <asm/mmu.h>
 
 /* Note on the LD/ST addr modes with addr reg wback
  *

arch/arm/Kconfig

@@ -20,7 +20,6 @@ config ARM
 	select GENERIC_STRNCPY_FROM_USER
 	select GENERIC_STRNLEN_USER
 	select HARDIRQS_SW_RESEND
-	select HAVE_AOUT
 	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -218,7 +217,8 @@ config VECTORS_BASE
 	default DRAM_BASE if REMAP_VECTORS_TO_RAM
 	default 0x00000000
 	help
-	  The base address of exception vectors.
+	  The base address of exception vectors.  This must be two pages
+	  in size.
 
 config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
@@ -1600,8 +1600,7 @@ config LOCAL_TIMERS
 config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
-	default 512 if SOC_OMAP5
-	default 512 if ARCH_KEYSTONE
+	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5
 	default 392 if ARCH_U8500
 	default 352 if ARCH_VT8500
 	default 288 if ARCH_SUNXI

arch/arm/Kconfig.debug

@@ -804,9 +804,19 @@ config DEBUG_LL_INCLUDE
 
 config DEBUG_UNCOMPRESS
 	bool
-	default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
-		     !DEBUG_OMAP2PLUS_UART && \
+	depends on ARCH_MULTIPLATFORM
+	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
 		     !DEBUG_TEGRA_UART
+	help
+	  This option influences the normal decompressor output for
+	  multiplatform kernels.  Normally, multiplatform kernels disable
+	  decompressor output because it is not possible to know where to
+	  send the decompressor output.
+
+	  When this option is set, the selected DEBUG_LL output method
+	  will be re-used for normal decompressor output on multiplatform
+	  kernels.
+	  
 
 config UNCOMPRESS_INCLUDE
 	string

arch/arm/Makefile

@@ -153,6 +153,7 @@ machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DOVE)		+= dove
 machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
+machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
@@ -160,15 +161,16 @@ machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
 machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
 machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
+machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_KIRKWOOD)		+= kirkwood
 machine-$(CONFIG_ARCH_KS8695)		+= ks8695
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MMP)		+= mmp
 machine-$(CONFIG_ARCH_MSM)		+= msm
 machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
+machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_NETX)		+= netx
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
@@ -176,7 +178,6 @@ machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_REALVIEW)		+= realview
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
@@ -186,25 +187,24 @@ machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)		+= s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)		+= s5pc100
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
-machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
 machine-$(CONFIG_ARCH_SHARK)		+= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
+machine-$(CONFIG_ARCH_SIRF)		+= prima2
+machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_STI)		+= sti
+machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
 machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
+machine-$(CONFIG_ARCH_VIRT)		+= virt
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
 machine-$(CONFIG_ARCH_W90X900)		+= w90x900
+machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
 machine-$(CONFIG_FOOTBRIDGE)		+= footbridge
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
-machine-$(CONFIG_ARCH_STI)		+= sti
-machine-$(CONFIG_ARCH_VIRT)		+= virt
-machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
-machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
-machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.

arch/arm/boot/dts/atlas6.dtsi

@@ -485,6 +485,12 @@
                                                 sirf,function = "usp0";
                                         };
                                 };
+				usp0_uart_nostreamctrl_pins_a: usp0@1 {
+                                        usp0 {
+                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
+                                                sirf,function = "usp0_uart_nostreamctrl";
+                                        };
+                                };
                                 usp1_pins_a: usp1@0 {
                                         usp1 {
                                                 sirf,pins = "usp1grp";
@@ -515,16 +521,16 @@
                                                 sirf,function = "pulse_count";
                                         };
                                 };
-                                cko0_rst_pins_a: cko0_rst@0 {
-                                        cko0_rst {
-                                                sirf,pins = "cko0_rstgrp";
-                                                sirf,function = "cko0_rst";
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
                                         };
                                 };
-                                cko1_rst_pins_a: cko1_rst@0 {
-                                        cko1_rst {
-                                                sirf,pins = "cko1_rstgrp";
-                                                sirf,function = "cko1_rst";
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
                                         };
                                 };
 			};

arch/arm/boot/dts/imx28-apx4devkit.dts

@@ -147,7 +147,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				pcf8563: rtc@51 {

arch/arm/boot/dts/imx28-evk.dts

@@ -195,7 +195,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				at24@51 {

arch/arm/boot/dts/imx28-m28evk.dts

@@ -184,7 +184,7 @@
 					reg = <0x0a>;
 					VDDA-supply = <&reg_3p3v>;
 					VDDIO-supply = <&reg_3p3v>;
-
+					clocks = <&saif0>;
 				};
 
 				eeprom: eeprom@51 {

arch/arm/boot/dts/imx28.dtsi

@@ -837,6 +837,7 @@
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
+				#clock-cells = <0>;
 				clocks = <&clks 53>;
 				dmas = <&dma_apbx 4>;
 				dma-names = "rx-tx";

arch/arm/boot/dts/imx51-babbage.dts

@@ -61,6 +61,16 @@
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
 	};
+
+	clocks {
+		clk_26M: codec_clock {
+			compatible = "fixed-clock";
+			reg=<0>;
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+			gpios = <&gpio4 26 1>;
+		};
+	};
 };
 
 &esdhc1 {
@@ -229,6 +239,7 @@
 				MX51_PAD_EIM_A27__GPIO2_21   0x5
 				MX51_PAD_CSPI1_SS0__GPIO4_24 0x85
 				MX51_PAD_CSPI1_SS1__GPIO4_25 0x85
+				MX51_PAD_CSPI1_RDY__GPIO4_26 0x80000000
 			>;
 		};
 	};
@@ -255,7 +266,7 @@
 	sgtl5000: codec@0a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clock-frequency = <26000000>;
+		clocks = <&clk_26M>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};

arch/arm/boot/dts/imx53-mba53.dts

@@ -27,7 +27,7 @@
 
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 50000 0 0>;
+		pwms = <&pwm2 0 50000>;
 		brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
 		default-brightness-level = <10>;
 		enable-gpios = <&gpio7 7 0>;

arch/arm/boot/dts/imx53.dtsi

@@ -725,15 +725,15 @@
 				uart1 {
 					pinctrl_uart1_1: uart1grp-1 {
 						fsl,pins = <
-							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1c5
-							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1c5
+							MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+							MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
 					pinctrl_uart1_2: uart1grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1c5
-							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1c5
+							MX53_PAD_PATA_DIOW__UART1_TXD_MUX  0x1e4
+							MX53_PAD_PATA_DMACK__UART1_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -748,8 +748,8 @@
 				uart2 {
 					pinctrl_uart2_1: uart2grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1c5
+							MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DMARQ__UART2_TXD_MUX     0x1e4
 						>;
 					};
 
@@ -766,17 +766,17 @@
 				uart3 {
 					pinctrl_uart3_1: uart3grp-1 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
-							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1c5
-							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+							MX53_PAD_PATA_DA_1__UART3_CTS	  0x1e4
+							MX53_PAD_PATA_DA_2__UART3_RTS	  0x1e4
 						>;
 					};
 
 					pinctrl_uart3_2: uart3grp-2 {
 						fsl,pins = <
-							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1c5
-							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1c5
+							MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+							MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
 						>;
 					};
 
@@ -785,8 +785,8 @@
 				uart4 {
 					pinctrl_uart4_1: uart4grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL0__UART4_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW0__UART4_RXD_MUX 0x1e4
 						>;
 					};
 				};
@@ -794,8 +794,8 @@
 				uart5 {
 					pinctrl_uart5_1: uart5grp-1 {
 						fsl,pins = <
-							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1c5
-							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1c5
+							MX53_PAD_KEY_COL1__UART5_TXD_MUX 0x1e4
+							MX53_PAD_KEY_ROW1__UART5_RXD_MUX 0x1e4
 						>;
 					};
 				};

arch/arm/boot/dts/msm8960-cdp.dts

@@ -26,7 +26,7 @@
 		cpu-offset = <0x80000>;
 	};
 
-	msmgpio: gpio@fd510000 {
+	msmgpio: gpio@800000 {
 		compatible = "qcom,msm-gpio";
 		gpio-controller;
 		#gpio-cells = <2>;
@@ -34,7 +34,7 @@
 		interrupts = <0 32 0x4>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		reg = <0xfd510000 0x4000>;
+		reg = <0x800000 0x4000>;
 	};
 
 	serial@16440000 {

arch/arm/boot/dts/omap5-uevm.dts

@@ -235,7 +235,7 @@
 };
 
 &mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&ldo9_reg>;
 	bus-width = <4>;
 };
 
@@ -282,6 +282,7 @@
 
 			regulators {
 				smps123_reg: smps123 {
+					/* VDD_OPP_MPU */
 					regulator-name = "smps123";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
 				};
 
 				smps45_reg: smps45 {
+					/* VDD_OPP_MM */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
 				};
 
 				smps6_reg: smps6 {
+					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
 				};
 
 				smps7_reg: smps7 {
+					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
 				};
 
 				smps8_reg: smps8 {
+					/* VDD_OPP_CORE */
 					regulator-name = "smps8";
 					regulator-min-microvolt = < 600000>;
 					regulator-max-microvolt = <1310000>;
@@ -322,15 +327,15 @@
 				};
 
 				smps9_reg: smps9 {
+					/* VDDA_2v1_AUD over VDD_2v1 */
 					regulator-name = "smps9";
 					regulator-min-microvolt = <2100000>;
 					regulator-max-microvolt = <2100000>;
-					regulator-always-on;
-					regulator-boot-on;
 					ti,smps-range = <0x80>;
 				};
 
 				smps10_reg: smps10 {
+					/* VBUS_5V_OTG */
 					regulator-name = "smps10";
 					regulator-min-microvolt = <5000000>;
 					regulator-max-microvolt = <5000000>;
@@ -339,38 +344,40 @@
 				};
 
 				ldo1_reg: ldo1 {
+					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo2_reg: ldo2 {
+					/* VCC_2V8_DISP: Does not go anywhere */
 					regulator-name = "ldo2";
-					regulator-min-microvolt = <2900000>;
-					regulator-max-microvolt = <2900000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2800000>;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo3_reg: ldo3 {
+					/* VDDAPHY_MDM: vdda_lli */
 					regulator-name = "ldo3";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
 					regulator-boot-on;
+					/* Only if Modem is used */
+					status = "disabled";
 				};
 
 				ldo4_reg: ldo4 {
+					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <2200000>;
-					regulator-max-microvolt = <2200000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1800000>;
 				};
 
 				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PHY: usb/sata/hdmi.. */
 					regulator-name = "ldo5";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -379,38 +386,43 @@
 				};
 
 				ldo6_reg: ldo6 {
+					/* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
 					regulator-name = "ldo6";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
 
 				ldo7_reg: ldo7 {
+					/* VDD_VPP: vpp1 */
 					regulator-name = "ldo7";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
-					regulator-boot-on;
+					regulator-min-microvolt = <2000000>;
+					regulator-max-microvolt = <2000000>;
+					/* Only for efuse reprograming! */
+					status = "disabled";
 				};
 
 				ldo8_reg: ldo8 {
+					/* VDD_3v0: Does not go anywhere */
 					regulator-name = "ldo8";
-					regulator-min-microvolt = <1500000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-always-on;
+					regulator-min-microvolt = <3000000>;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
+					/* Unused */
+					status = "disabled";
 				};
 
 				ldo9_reg: ldo9 {
+					/* VCC_DV_SDIO: vdds_sdcard */
 					regulator-name = "ldo9";
 					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
+					regulator-max-microvolt = <3000000>;
 					regulator-boot-on;
 				};
 
 				ldoln_reg: ldoln {
+					/* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
 					regulator-name = "ldoln";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -419,12 +431,20 @@
 				};
 
 				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
 					regulator-name = "ldousb";
 					regulator-min-microvolt = <3250000>;
 					regulator-max-microvolt = <3250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
+
+				regen3_reg: regen3 {
+					/* REGEN3 controls LDO9 supply to card */
+					regulator-name = "regen3";
+					regulator-always-on;
+					regulator-boot-on;
+				};
 			};
 		};
 	};

arch/arm/boot/dts/prima2.dtsi

@@ -515,16 +515,16 @@
                                                 sirf,function = "pulse_count";
                                         };
                                 };
-                                cko0_rst_pins_a: cko0_rst@0 {
-                                        cko0_rst {
-                                                sirf,pins = "cko0_rstgrp";
-                                                sirf,function = "cko0_rst";
+                                cko0_pins_a: cko0@0 {
+                                        cko0 {
+                                                sirf,pins = "cko0grp";
+                                                sirf,function = "cko0";
                                         };
                                 };
-                                cko1_rst_pins_a: cko1_rst@0 {
-                                        cko1_rst {
-                                                sirf,pins = "cko1_rstgrp";
-                                                sirf,function = "cko1_rst";
+                                cko1_pins_a: cko1@0 {
+                                        cko1 {
+                                                sirf,pins = "cko1grp";
+                                                sirf,function = "cko1";
                                         };
                                 };
 			};

arch/arm/boot/dts/stih416-pinctrl.dtsi

@@ -166,6 +166,15 @@
 				reg		= <0x9000 0x100>;
 				st,bank-name	= "PIO31";
 			};
+
+			serial2-oe {
+				pinctrl_serial2_oe: serial2-1 {
+					st,pins {
+						output-enable	= <&PIO11 3 ALT2 OUT>;
+					};
+				};
+			};
+
 		};
 
 		pin-controller-rear {
@@ -218,7 +227,6 @@
 					st,pins {
 						tx	= <&PIO17 4 ALT2 OUT>;
 						rx	= <&PIO17 5 ALT2 IN>;
-						output-enable	= <&PIO11 3 ALT2 OUT>;
 					};
 				};
 			};

arch/arm/boot/dts/stih416.dtsi

@@ -79,7 +79,7 @@
 			interrupts	= <0 197 0>;
 			clocks          = <&CLK_S_ICN_REG_0>;
 			pinctrl-names 	= "default";
-			pinctrl-0 	= <&pinctrl_serial2>;
+			pinctrl-0 	= <&pinctrl_serial2 &pinctrl_serial2_oe>;
 		};
 
 		/* SBC_UART1 */

arch/arm/boot/dts/stih41x.dtsi

@@ -6,10 +6,12 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
 		cpu@1 {
+			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
 		};

arch/arm/boot/dts/tegra20-colibri-512.dtsi

@@ -457,6 +457,7 @@
 	};
 
 	usb-phy@c5004000 {
+		status = "okay";
 		nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
 			GPIO_ACTIVE_LOW>;
 	};

arch/arm/boot/dts/twl4030.dtsi

@@ -47,6 +47,12 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vmmc2: regulator-vmmc2 {
+		compatible = "ti,twl4030-vmmc2";
+		regulator-min-microvolt = <1850000>;
+		regulator-max-microvolt = <3150000>;
+	};
+
 	vusb1v5: regulator-vusb1v5 {
 		compatible = "ti,twl4030-vusb1v5";
 	};

arch/arm/boot/dts/vf610.dtsi

@@ -442,8 +442,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d0000 0x1000>;
 				interrupts = <0 78 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET0>,
+					<&clks VF610_CLK_ENET0>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
@@ -453,8 +453,8 @@
 				compatible = "fsl,mvf600-fec";
 				reg = <0x400d1000 0x1000>;
 				interrupts = <0 79 0x04>;
-				clocks = <&clks VF610_CLK_ENET>,
-					<&clks VF610_CLK_ENET>,
+				clocks = <&clks VF610_CLK_ENET1>,
+					<&clks VF610_CLK_ENET1>,
 					<&clks VF610_CLK_ENET>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";

arch/arm/common/edma.c

@@ -26,7 +26,6 @@
 #include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/edma.h>
-#include <linux/err.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
 #include <linux/of_dma.h>

arch/arm/common/mcpm_platsmp.c

@@ -19,7 +19,7 @@
 #include <asm/smp.h>
 #include <asm/smp_plat.h>
 
-static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	unsigned int mpidr, pcpu, pcluster, ret;
 	extern void secondary_startup(void);
@@ -40,7 +40,7 @@ static int __cpuinit mcpm_boot_secondary(unsigned int cpu, struct task_struct *i
 	return 0;
 }
 
-static void __cpuinit mcpm_secondary_init(unsigned int cpu)
+static void mcpm_secondary_init(unsigned int cpu)
 {
 	mcpm_cpu_powered_up();
 }

arch/arm/configs/da8xx_omapl_defconfig

@@ -102,6 +102,8 @@ CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/davinci_all_defconfig

@@ -162,6 +162,8 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=m
 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_TI_EDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
 CONFIG_XFS_FS=m

arch/arm/configs/multi_v7_defconfig

@@ -53,6 +53,7 @@ CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_OMAP_OCP2SCP=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI_PLATFORM=y
@@ -61,6 +62,7 @@ CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_NET_CALXEDA_XGMAC=y
+CONFIG_KS8851=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_MDIO_SUN4I=y
@@ -89,6 +91,7 @@ CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_SIRF=y
 CONFIG_I2C_TEGRA=y
 CONFIG_SPI=y
+CONFIG_SPI_OMAP24XX=y
 CONFIG_SPI_PL022=y
 CONFIG_SPI_SIRF=y
 CONFIG_SPI_TEGRA114=y
@@ -111,11 +114,12 @@ CONFIG_FB_SIMPLE=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_ISP1760_HCD=y
 CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_AB8500_USB=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_OMAP_USB2=y

arch/arm/configs/nhk8815_defconfig

@@ -1,6 +1,8 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -48,7 +50,6 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_MTD=y
 CONFIG_MTD_TESTS=m
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_NAND_ECC_SMC=y
 CONFIG_MTD_NAND=y
@@ -94,8 +95,10 @@ CONFIG_I2C_GPIO=y
 CONFIG_I2C_NOMADIK=y
 CONFIG_DEBUG_GPIO=y
 # CONFIG_HWMON is not set
+CONFIG_REGULATOR=y
 CONFIG_MMC=y
-CONFIG_MMC_CLKGATE=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
 CONFIG_MMC_ARMMMCI=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y

arch/arm/include/asm/a.out-core.h

@@ -1,45 +0,0 @@
-/* a.out coredump register dumper
- *
- * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public Licence
- * as published by the Free Software Foundation; either version
- * 2 of the Licence, or (at your option) any later version.
- */
-
-#ifndef _ASM_A_OUT_CORE_H
-#define _ASM_A_OUT_CORE_H
-
-#ifdef __KERNEL__
-
-#include <linux/user.h>
-#include <linux/elfcore.h>
-
-/*
- * fill in the user structure for an a.out core dump
- */
-static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
-{
-	struct task_struct *tsk = current;
-
-	dump->magic = CMAGIC;
-	dump->start_code = tsk->mm->start_code;
-	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
-
-	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
-	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	dump->u_ssize = 0;
-
-	memset(dump->u_debugreg, 0, sizeof(dump->u_debugreg));
-
-	if (dump->start_stack < 0x04000000)
-		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
-
-	dump->regs = *regs;
-	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
-}
-
-#endif /* __KERNEL__ */
-#endif /* _ASM_A_OUT_CORE_H */

arch/arm/include/asm/arch_timer.h

@@ -89,7 +89,7 @@ static inline u64 arch_counter_get_cntvct(void)
 	return cval;
 }
 
-static inline void __cpuinit arch_counter_set_user_access(void)
+static inline void arch_counter_set_user_access(void)
 {
 	u32 cntkctl;
 

arch/arm/include/asm/cputype.h

@@ -89,13 +89,18 @@ extern unsigned int processor_id;
 		__val;							\
 	})
 
+/*
+ * The memory clobber prevents gcc 4.5 from reordering the mrc before
+ * any is_smp() tests, which can cause undefined instruction aborts on
+ * ARM1136 r0 due to the missing extended CP15 registers.
+ */
 #define read_cpuid_ext(ext_reg)						\
 	({								\
 		unsigned int __val;					\
 		asm("mrc	p15, 0, %0, c0, " ext_reg		\
 		    : "=r" (__val)					\
 		    :							\
-		    : "cc");						\
+		    : "memory");					\
 		__val;							\
 	})
 

arch/arm/include/asm/elf.h

@@ -130,4 +130,10 @@ struct mm_struct;
 extern unsigned long arch_randomize_brk(struct mm_struct *mm);
 #define arch_randomize_brk arch_randomize_brk
 
+#ifdef CONFIG_MMU
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+int arch_setup_additional_pages(struct linux_binprm *, int);
+#endif
+
 #endif

arch/arm/include/asm/mmu.h

@@ -6,8 +6,11 @@
 typedef struct {
 #ifdef CONFIG_CPU_HAS_ASID
 	atomic64_t	id;
+#else
+	int		switch_pending;
 #endif
 	unsigned int	vmalloc_seq;
+	unsigned long	sigpage;
 } mm_context_t;
 
 #ifdef CONFIG_CPU_HAS_ASID

arch/arm/include/asm/mmu_context.h

@@ -56,7 +56,7 @@ static inline void check_and_switch_context(struct mm_struct *mm,
 		 * on non-ASID CPUs, the old mm will remain valid until the
 		 * finish_arch_post_lock_switch() call.
 		 */
-		set_ti_thread_flag(task_thread_info(tsk), TIF_SWITCH_MM);
+		mm->context.switch_pending = 1;
 	else
 		cpu_switch_mm(mm->pgd, mm);
 }
@@ -65,9 +65,21 @@ static inline void check_and_switch_context(struct mm_struct *mm,
 	finish_arch_post_lock_switch
 static inline void finish_arch_post_lock_switch(void)
 {
-	if (test_and_clear_thread_flag(TIF_SWITCH_MM)) {
-		struct mm_struct *mm = current->mm;
-		cpu_switch_mm(mm->pgd, mm);
+	struct mm_struct *mm = current->mm;
+
+	if (mm && mm->context.switch_pending) {
+		/*
+		 * Preemption must be disabled during cpu_switch_mm() as we
+		 * have some stateful cache flush implementations. Check
+		 * switch_pending again in case we were preempted and the
+		 * switch to this mm was already done.
+		 */
+		preempt_disable();
+		if (mm->context.switch_pending) {
+			mm->context.switch_pending = 0;
+			cpu_switch_mm(mm->pgd, mm);
+		}
+		preempt_enable_no_resched();
 	}
 }
 

arch/arm/include/asm/page.h

@@ -142,7 +142,9 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from,
 #define clear_page(page)	memset((void *)(page), 0, PAGE_SIZE)
 extern void copy_page(void *to, const void *from);
 
+#ifdef CONFIG_KUSER_HELPERS
 #define __HAVE_ARCH_GATE_AREA 1
+#endif
 
 #ifdef CONFIG_ARM_LPAE
 #include <asm/pgtable-3level-types.h>

arch/arm/include/asm/processor.h

@@ -54,7 +54,6 @@ struct thread_struct {
 
 #define start_thread(regs,pc,sp)					\
 ({									\
-	unsigned long *stack = (unsigned long *)sp;			\
 	memset(regs->uregs, 0, sizeof(regs->uregs));			\
 	if (current->personality & ADDR_LIMIT_32BIT)			\
 		regs->ARM_cpsr = USR_MODE;				\
@@ -65,9 +64,6 @@ struct thread_struct {
 	regs->ARM_cpsr |= PSR_ENDSTATE;					\
 	regs->ARM_pc = pc & ~1;		/* pc */			\
 	regs->ARM_sp = sp;		/* sp */			\
-	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
-	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
-	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
 	nommu_start_thread(regs);					\
 })
 

arch/arm/include/asm/thread_info.h

@@ -156,7 +156,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *,
 #define TIF_USING_IWMMXT	17
 #define TIF_MEMDIE		18	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	20
-#define TIF_SWITCH_MM		22	/* deferred switch_mm */
 
 #define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)

arch/arm/include/asm/tlbflush.h

@@ -443,7 +443,18 @@ static inline void local_flush_bp_all(void)
 		isb();
 }
 
+#include <asm/cputype.h>
 #ifdef CONFIG_ARM_ERRATA_798181
+static inline int erratum_a15_798181(void)
+{
+	unsigned int midr = read_cpuid_id();
+
+	/* Cortex-A15 r0p0..r3p2 affected */
+	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
+		return 0;
+	return 1;
+}
+
 static inline void dummy_flush_tlb_a15_erratum(void)
 {
 	/*
@@ -453,6 +464,11 @@ static inline void dummy_flush_tlb_a15_erratum(void)
 	dsb();
 }
 #else
+static inline int erratum_a15_798181(void)
+{
+	return 0;
+}
+
 static inline void dummy_flush_tlb_a15_erratum(void)
 {
 }

arch/arm/include/asm/virt.h

@@ -29,6 +29,7 @@
 #define BOOT_CPU_MODE_MISMATCH	PSR_N_BIT
 
 #ifndef __ASSEMBLY__
+#include <asm/cacheflush.h>
 
 #ifdef CONFIG_ARM_VIRT_EXT
 /*
@@ -41,10 +42,21 @@
  */
 extern int __boot_cpu_mode;
 
+static inline void sync_boot_mode(void)
+{
+	/*
+	 * As secondaries write to __boot_cpu_mode with caches disabled, we
+	 * must flush the corresponding cache entries to ensure the visibility
+	 * of their writes.
+	 */
+	sync_cache_r(&__boot_cpu_mode);
+}
+
 void __hyp_set_vectors(unsigned long phys_vector_base);
 unsigned long __hyp_get_vectors(void);
 #else
 #define __boot_cpu_mode	(SVC_MODE)
+#define sync_boot_mode()
 #endif
 
 #ifndef ZIMAGE

arch/arm/include/uapi/asm/Kbuild

@@ -1,7 +1,6 @@
 # UAPI Header export list
 include include/uapi/asm-generic/Kbuild.asm
 
-header-y += a.out.h
 header-y += byteorder.h
 header-y += fcntl.h
 header-y += hwcap.h

arch/arm/include/uapi/asm/a.out.h

@@ -1,34 +0,0 @@
-#ifndef __ARM_A_OUT_H__
-#define __ARM_A_OUT_H__
-
-#include <linux/personality.h>
-#include <linux/types.h>
-
-struct exec
-{
-  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
-  __u32 a_text;		/* length of text, in bytes */
-  __u32 a_data;		/* length of data, in bytes */
-  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
-  __u32 a_syms;		/* length of symbol table data in file, in bytes */
-  __u32 a_entry;	/* start address */
-  __u32 a_trsize;	/* length of relocation info for text, in bytes */
-  __u32 a_drsize;	/* length of relocation info for data, in bytes */
-};
-
-/*
- * This is always the same
- */
-#define N_TXTADDR(a)	(0x00008000)
-
-#define N_TRSIZE(a)	((a).a_trsize)
-#define N_DRSIZE(a)	((a).a_drsize)
-#define N_SYMSIZE(a)	((a).a_syms)
-
-#define M_ARM 103
-
-#ifndef LIBRARY_START_TEXT
-#define LIBRARY_START_TEXT	(0x00c00000)
-#endif
-
-#endif /* __A_OUT_GNU_H__ */

arch/arm/kernel/entry-armv.S

@@ -742,6 +742,18 @@ ENDPROC(__switch_to)
 #endif
 	.endm
 
+	.macro	kuser_pad, sym, size
+	.if	(. - \sym) & 3
+	.rept	4 - (. - \sym) & 3
+	.byte	0
+	.endr
+	.endif
+	.rept	(\size - (. - \sym)) / 4
+	.word	0xe7fddef1
+	.endr
+	.endm
+
+#ifdef CONFIG_KUSER_HELPERS
 	.align	5
 	.globl	__kuser_helper_start
 __kuser_helper_start:
@@ -832,18 +844,13 @@ kuser_cmpxchg64_fixup:
 #error "incoherent kernel configuration"
 #endif
 
-	/* pad to next slot */
-	.rept	(16 - (. - __kuser_cmpxchg64)/4)
-	.word	0
-	.endr
-
-	.align	5
+	kuser_pad __kuser_cmpxchg64, 64
 
 __kuser_memory_barrier:				@ 0xffff0fa0
 	smp_dmb	arm
 	usr_ret	lr
 
-	.align	5
+	kuser_pad __kuser_memory_barrier, 32
 
 __kuser_cmpxchg:				@ 0xffff0fc0
 
@@ -916,13 +923,14 @@ kuser_cmpxchg32_fixup:
 
 #endif
 
-	.align	5
+	kuser_pad __kuser_cmpxchg, 32
 
 __kuser_get_tls:				@ 0xffff0fe0
 	ldr	r0, [pc, #(16 - 8)]	@ read TLS, set in kuser_get_tls_init
 	usr_ret	lr
 	mrc	p15, 0, r0, c13, c0, 3	@ 0xffff0fe8 hardware TLS code
-	.rep	4
+	kuser_pad __kuser_get_tls, 16
+	.rep	3
 	.word	0			@ 0xffff0ff0 software TLS value, then
 	.endr				@ pad up to __kuser_helper_version
 
@@ -932,14 +940,16 @@ __kuser_helper_version:				@ 0xffff0ffc
 	.globl	__kuser_helper_end
 __kuser_helper_end:
 
+#endif
+
  THUMB(	.thumb	)
 
 /*
  * Vector stubs.
  *
- * This code is copied to 0xffff0200 so we can use branches in the
- * vectors, rather than ldr's.  Note that this code must not
- * exceed 0x300 bytes.
+ * This code is copied to 0xffff1000 so we can use branches in the
+ * vectors, rather than ldr's.  Note that this code must not exceed
+ * a page size.
  *
  * Common stub entry macro:
  *   Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
@@ -986,8 +996,17 @@ ENDPROC(vector_\name)
 1:
 	.endm
 
-	.globl	__stubs_start
+	.section .stubs, "ax", %progbits
 __stubs_start:
+	@ This must be the first word
+	.word	vector_swi
+
+vector_rst:
+ ARM(	swi	SYS_ERROR0	)
+ THUMB(	svc	#0		)
+ THUMB(	nop			)
+	b	vector_und
+
 /*
  * Interrupt dispatcher
  */
@@ -1081,6 +1100,16 @@ __stubs_start:
 
 	.align	5
 
+/*=============================================================================
+ * Address exception handler
+ *-----------------------------------------------------------------------------
+ * These aren't too critical.
+ * (they're not supposed to happen, and won't happen in 32-bit data mode).
+ */
+
+vector_addrexcptn:
+	b	vector_addrexcptn
+
 /*=============================================================================
  * Undefined FIQs
  *-----------------------------------------------------------------------------
@@ -1094,45 +1123,19 @@ __stubs_start:
 vector_fiq:
 	subs	pc, lr, #4
 
-/*=============================================================================
- * Address exception handler
- *-----------------------------------------------------------------------------
- * These aren't too critical.
- * (they're not supposed to happen, and won't happen in 32-bit data mode).
- */
-
-vector_addrexcptn:
-	b	vector_addrexcptn
-
-/*
- * We group all the following data together to optimise
- * for CPUs with separate I & D caches.
- */
-	.align	5
-
-.LCvswi:
-	.word	vector_swi
-
-	.globl	__stubs_end
-__stubs_end:
-
-	.equ	stubs_offset, __vectors_start + 0x200 - __stubs_start
+	.globl	vector_fiq_offset
+	.equ	vector_fiq_offset, vector_fiq
 
-	.globl	__vectors_start
+	.section .vectors, "ax", %progbits
 __vectors_start:
- ARM(	swi	SYS_ERROR0	)
- THUMB(	svc	#0		)
- THUMB(	nop			)
-	W(b)	vector_und + stubs_offset
-	W(ldr)	pc, .LCvswi + stubs_offset
-	W(b)	vector_pabt + stubs_offset
-	W(b)	vector_dabt + stubs_offset
-	W(b)	vector_addrexcptn + stubs_offset
-	W(b)	vector_irq + stubs_offset
-	W(b)	vector_fiq + stubs_offset
-
-	.globl	__vectors_end
-__vectors_end:
+	W(b)	vector_rst
+	W(b)	vector_und
+	W(ldr)	pc, __vectors_start + 0x1000
+	W(b)	vector_pabt
+	W(b)	vector_dabt
+	W(b)	vector_addrexcptn
+	W(b)	vector_irq
+	W(b)	vector_fiq
 
 	.data
 

arch/arm/kernel/entry-v7m.S

@@ -49,7 +49,7 @@ __irq_entry:
 	mov	r1, sp
 	stmdb	sp!, {lr}
 	@ routine called with r0 = irq number, r1 = struct pt_regs *
-	bl	nvic_do_IRQ
+	bl	nvic_handle_irq
 
 	pop	{lr}
 	@

arch/arm/kernel/fiq.c

@@ -47,6 +47,11 @@
 #include <asm/irq.h>
 #include <asm/traps.h>
 
+#define FIQ_OFFSET ({					\
+		extern void *vector_fiq_offset;		\
+		(unsigned)&vector_fiq_offset;		\
+	})
+
 static unsigned long no_fiq_insn;
 
 /* Default reacquire function
@@ -80,13 +85,16 @@ int show_fiq_list(struct seq_file *p, int prec)
 void set_fiq_handler(void *start, unsigned int length)
 {
 #if defined(CONFIG_CPU_USE_DOMAINS)
-	memcpy((void *)0xffff001c, start, length);
+	void *base = (void *)0xffff0000;
 #else
-	memcpy(vectors_page + 0x1c, start, length);
+	void *base = vectors_page;
 #endif
-	flush_icache_range(0xffff001c, 0xffff001c + length);
+	unsigned offset = FIQ_OFFSET;
+
+	memcpy(base + offset, start, length);
+	flush_icache_range(0xffff0000 + offset, 0xffff0000 + offset + length);
 	if (!vectors_high())
-		flush_icache_range(0x1c, 0x1c + length);
+		flush_icache_range(offset, offset + length);
 }
 
 int claim_fiq(struct fiq_handler *f)
@@ -144,6 +152,7 @@ EXPORT_SYMBOL(disable_fiq);
 
 void __init init_FIQ(int start)
 {
-	no_fiq_insn = *(unsigned long *)0xffff001c;
+	unsigned offset = FIQ_OFFSET;
+	no_fiq_insn = *(unsigned long *)(0xffff0000 + offset);
 	fiq_start = start;
 }

arch/arm/kernel/head-common.S

@@ -149,7 +149,6 @@ ENDPROC(lookup_processor_type)
  *	r5 = proc_info pointer in physical address space
  *	r9 = cpuid (preserved)
  */
-	__CPUINIT
 __lookup_processor_type:
 	adr	r3, __lookup_processor_type_data
 	ldmia	r3, {r4 - r6}

arch/arm/kernel/head-nommu.S

@@ -87,7 +87,7 @@ ENTRY(stext)
 ENDPROC(stext)
 
 #ifdef CONFIG_SMP
-	__CPUINIT
+	.text
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/head.S

@@ -343,7 +343,7 @@ __turn_mmu_on_loc:
 	.long	__turn_mmu_on_end
 
 #if defined(CONFIG_SMP)
-	__CPUINIT
+	.text
 ENTRY(secondary_startup)
 	/*
 	 * Common entry point for secondary CPUs.

arch/arm/kernel/hw_breakpoint.c

@@ -1020,7 +1020,7 @@ out_mdbgen:
 		cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
 }
 
-static int __cpuinit dbg_reset_notify(struct notifier_block *self,
+static int dbg_reset_notify(struct notifier_block *self,
 				      unsigned long action, void *cpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) == CPU_ONLINE)
@@ -1029,7 +1029,7 @@ static int __cpuinit dbg_reset_notify(struct notifier_block *self,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata dbg_reset_nb = {
+static struct notifier_block dbg_reset_nb = {
 	.notifier_call = dbg_reset_notify,
 };
 

arch/arm/kernel/hyp-stub.S

@@ -56,8 +56,8 @@ ENTRY(__boot_cpu_mode)
 	ldr	\reg3, [\reg2]
 	ldr	\reg1, [\reg2, \reg3]
 	cmp	\mode, \reg1		@ matches primary CPU boot mode?
-	orrne	r7, r7, #BOOT_CPU_MODE_MISMATCH
-	strne	r7, [r5, r6]		@ record what happened and give up
+	orrne	\reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
+	strne	\reg1, [\reg2, \reg3]	@ record what happened and give up
 	.endm
 
 #else	/* ZIMAGE */

arch/arm/kernel/perf_event_cpu.c

@@ -157,8 +157,8 @@ static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
  * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
  * junk values out of them.
  */
-static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
-				    unsigned long action, void *hcpu)
+static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
+			  void *hcpu)
 {
 	if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
 		return NOTIFY_DONE;
@@ -171,7 +171,7 @@ static int __cpuinit cpu_pmu_notify(struct notifier_block *b,
 	return NOTIFY_OK;
 }
 
-static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
+static struct notifier_block cpu_pmu_hotplug_notifier = {
 	.notifier_call = cpu_pmu_notify,
 };
 

arch/arm/kernel/process.c

@@ -197,6 +197,7 @@ void machine_shutdown(void)
  */
 void machine_halt(void)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	local_irq_disable();
@@ -211,6 +212,7 @@ void machine_halt(void)
  */
 void machine_power_off(void)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	if (pm_power_off)
@@ -230,6 +232,7 @@ void machine_power_off(void)
  */
 void machine_restart(char *cmd)
 {
+	local_irq_disable();
 	smp_send_stop();
 
 	arm_pm_restart(reboot_mode, cmd);
@@ -426,10 +429,11 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
 }
 
 #ifdef CONFIG_MMU
+#ifdef CONFIG_KUSER_HELPERS
 /*
  * The vectors page is always readable from user space for the
- * atomic helpers and the signal restart code. Insert it into the
- * gate_vma so that it is visible through ptrace and /proc/<pid>/mem.
+ * atomic helpers. Insert it into the gate_vma so that it is visible
+ * through ptrace and /proc/<pid>/mem.
  */
 static struct vm_area_struct gate_vma = {
 	.vm_start	= 0xffff0000,
@@ -458,9 +462,48 @@ int in_gate_area_no_mm(unsigned long addr)
 {
 	return in_gate_area(NULL, addr);
 }
+#define is_gate_vma(vma)	((vma) = &gate_vma)
+#else
+#define is_gate_vma(vma)	0
+#endif
 
 const char *arch_vma_name(struct vm_area_struct *vma)
 {
-	return (vma == &gate_vma) ? "[vectors]" : NULL;
+	return is_gate_vma(vma) ? "[vectors]" :
+		(vma->vm_mm && vma->vm_start == vma->vm_mm->context.sigpage) ?
+		 "[sigpage]" : NULL;
+}
+
+static struct page *signal_page;
+extern struct page *get_signal_page(void);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr;
+	int ret;
+
+	if (!signal_page)
+		signal_page = get_signal_page();
+	if (!signal_page)
+		return -ENOMEM;
+
+	down_write(&mm->mmap_sem);
+	addr = get_unmapped_area(NULL, 0, PAGE_SIZE, 0, 0);
+	if (IS_ERR_VALUE(addr)) {
+		ret = addr;
+		goto up_fail;
+	}
+
+	ret = install_special_mapping(mm, addr, PAGE_SIZE,
+		VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC,
+		&signal_page);
+
+	if (ret == 0)
+		mm->context.sigpage = addr;
+
+ up_fail:
+	up_write(&mm->mmap_sem);
+	return ret;
 }
 #endif

arch/arm/kernel/psci_smp.c

@@ -46,8 +46,7 @@
 
 extern void secondary_startup(void);
 
-static int __cpuinit psci_boot_secondary(unsigned int cpu,
-					 struct task_struct *idle)
+static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
 		return psci_ops.cpu_on(cpu_logical_map(cpu),

arch/arm/kernel/setup.c

@@ -836,6 +836,8 @@ static int __init meminfo_cmp(const void *_a, const void *_b)
 void __init hyp_mode_check(void)
 {
 #ifdef CONFIG_ARM_VIRT_EXT
+	sync_boot_mode();
+
 	if (is_hyp_mode_available()) {
 		pr_info("CPU: All CPU(s) started in HYP mode.\n");
 		pr_info("CPU: Virtualization extensions available.\n");
@@ -971,6 +973,7 @@ static const char *hwcap_str[] = {
 	"vfpv4",
 	"idiva",
 	"idivt",
+	"vfpd32",
 	"lpae",
 	NULL
 };

arch/arm/kernel/signal.c

@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/errno.h>
+#include <linux/random.h>
 #include <linux/signal.h>
 #include <linux/personality.h>
 #include <linux/uaccess.h>
@@ -15,12 +16,11 @@
 
 #include <asm/elf.h>
 #include <asm/cacheflush.h>
+#include <asm/traps.h>
 #include <asm/ucontext.h>
 #include <asm/unistd.h>
 #include <asm/vfp.h>
 
-#include "signal.h"
-
 /*
  * For ARM syscalls, we encode the syscall number into the instruction.
  */
@@ -40,11 +40,13 @@
 #define SWI_THUMB_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
 #define SWI_THUMB_RT_SIGRETURN	(0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
 
-const unsigned long sigreturn_codes[7] = {
+static const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_SIGRETURN,    SWI_SYS_SIGRETURN,    SWI_THUMB_SIGRETURN,
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
+static unsigned long signal_return_offset;
+
 #ifdef CONFIG_CRUNCH
 static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 {
@@ -400,14 +402,20 @@ setup_return(struct pt_regs *regs, struct ksignal *ksig,
 		    __put_user(sigreturn_codes[idx+1], rc+1))
 			return 1;
 
-		if ((cpsr & MODE32_BIT) && !IS_ENABLED(CONFIG_ARM_MPU)) {
+#ifdef CONFIG_MMU
+		if (cpsr & MODE32_BIT) {
+			struct mm_struct *mm = current->mm;
+
 			/*
-			 * 32-bit code can use the new high-page
-			 * signal return code support except when the MPU has
-			 * protected the vectors page from PL0
+			 * 32-bit code can use the signal return page
+			 * except when the MPU has protected the vectors
+			 * page from PL0
 			 */
-			retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
-		} else {
+			retcode = mm->context.sigpage + signal_return_offset +
+				  (idx << 2) + thumb;
+		} else
+#endif
+		{
 			/*
 			 * Ensure that the instruction cache sees
 			 * the return code written onto the stack.
@@ -608,3 +616,33 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 	} while (thread_flags & _TIF_WORK_MASK);
 	return 0;
 }
+
+struct page *get_signal_page(void)
+{
+	unsigned long ptr;
+	unsigned offset;
+	struct page *page;
+	void *addr;
+
+	page = alloc_pages(GFP_KERNEL, 0);
+
+	if (!page)
+		return NULL;
+
+	addr = page_address(page);
+
+	/* Give the signal return code some randomness */
+	offset = 0x200 + (get_random_int() & 0x7fc);
+	signal_return_offset = offset;
+
+	/*
+	 * Copy signal return handlers into the vector page, and
+	 * set sigreturn to be a pointer to these.
+	 */
+	memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes));
+
+	ptr = (unsigned long)addr + offset;
+	flush_icache_range(ptr, ptr + sizeof(sigreturn_codes));
+
+	return page;
+}

arch/arm/kernel/signal.h

@@ -1,12 +0,0 @@
-/*
- *  linux/arch/arm/kernel/signal.h
- *
- *  Copyright (C) 2005-2009 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
-
-extern const unsigned long sigreturn_codes[7];

arch/arm/kernel/smp.c

@@ -58,7 +58,7 @@ struct secondary_data secondary_data;
  * control for which core is the next to come out of the secondary
  * boot "holding pen"
  */
-volatile int __cpuinitdata pen_release = -1;
+volatile int pen_release = -1;
 
 enum ipi_msg_type {
 	IPI_WAKEUP,
@@ -86,7 +86,7 @@ static unsigned long get_arch_pgd(pgd_t *pgd)
 	return pgdir >> ARCH_PGD_SHIFT;
 }
 
-int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle)
+int __cpu_up(unsigned int cpu, struct task_struct *idle)
 {
 	int ret;
 
@@ -138,7 +138,7 @@ void __init smp_init_cpus(void)
 		smp_ops.smp_init_cpus();
 }
 
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+int boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (smp_ops.smp_boot_secondary)
 		return smp_ops.smp_boot_secondary(cpu, idle);
@@ -170,7 +170,7 @@ static int platform_cpu_disable(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuinit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	int ret;
@@ -216,7 +216,7 @@ static DECLARE_COMPLETION(cpu_died);
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuinit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) {
 		pr_err("CPU%u: cpu didn't die\n", cpu);
@@ -306,7 +306,7 @@ void __ref cpu_die(void)
  * Called by both boot and secondaries to move global data into
  * per-processor storage.
  */
-static void __cpuinit smp_store_cpu_info(unsigned int cpuid)
+static void smp_store_cpu_info(unsigned int cpuid)
 {
 	struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
 
@@ -322,7 +322,7 @@ static void percpu_timer_setup(void);
  * This is the secondary CPU boot entry.  We're using this CPUs
  * idle thread stack, but a set of temporary page tables.
  */
-asmlinkage void __cpuinit secondary_start_kernel(void)
+asmlinkage void secondary_start_kernel(void)
 {
 	struct mm_struct *mm = &init_mm;
 	unsigned int cpu;
@@ -521,7 +521,7 @@ static void broadcast_timer_set_mode(enum clock_event_mode mode,
 {
 }
 
-static void __cpuinit broadcast_timer_setup(struct clock_event_device *evt)
+static void broadcast_timer_setup(struct clock_event_device *evt)
 {
 	evt->name	= "dummy_timer";
 	evt->features	= CLOCK_EVT_FEAT_ONESHOT |
@@ -550,7 +550,7 @@ int local_timer_register(struct local_timer_ops *ops)
 }
 #endif
 
-static void __cpuinit percpu_timer_setup(void)
+static void percpu_timer_setup(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);

arch/arm/kernel/smp_tlb.c

@@ -70,23 +70,6 @@ static inline void ipi_flush_bp_all(void *ignored)
 	local_flush_bp_all();
 }
 
-#ifdef CONFIG_ARM_ERRATA_798181
-static int erratum_a15_798181(void)
-{
-	unsigned int midr = read_cpuid_id();
-
-	/* Cortex-A15 r0p0..r3p2 affected */
-	if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2)
-		return 0;
-	return 1;
-}
-#else
-static int erratum_a15_798181(void)
-{
-	return 0;
-}
-#endif
-
 static void ipi_flush_tlb_a15_erratum(void *arg)
 {
 	dmb();

arch/arm/kernel/smp_twd.c

@@ -187,7 +187,7 @@ core_initcall(twd_cpufreq_init);
 
 #endif
 
-static void __cpuinit twd_calibrate_rate(void)
+static void twd_calibrate_rate(void)
 {
 	unsigned long count;
 	u64 waitjiffies;
@@ -265,7 +265,7 @@ static void twd_get_clock(struct device_node *np)
 /*
  * Setup the local clock events for a CPU.
  */
-static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
+static int twd_timer_setup(struct clock_event_device *clk)
 {
 	struct clock_event_device **this_cpu_clk;
 	int cpu = smp_processor_id();
@@ -308,7 +308,7 @@ static int __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	return 0;
 }
 
-static struct local_timer_ops twd_lt_ops __cpuinitdata = {
+static struct local_timer_ops twd_lt_ops = {
 	.setup	= twd_timer_setup,
 	.stop	= twd_timer_stop,
 };

arch/arm/kernel/traps.c

@@ -35,8 +35,6 @@
 #include <asm/tls.h>
 #include <asm/system_misc.h>
 
-#include "signal.h"
-
 static const char *handler[]= { "prefetch abort", "data abort", "address exception", "interrupt" };
 
 void *vectors_page;
@@ -800,15 +798,26 @@ void __init trap_init(void)
 	return;
 }
 
-static void __init kuser_get_tls_init(unsigned long vectors)
+#ifdef CONFIG_KUSER_HELPERS
+static void __init kuser_init(void *vectors)
 {
+	extern char __kuser_helper_start[], __kuser_helper_end[];
+	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+
+	memcpy(vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+
 	/*
 	 * vectors + 0xfe0 = __kuser_get_tls
 	 * vectors + 0xfe8 = hardware TLS instruction at 0xffff0fe8
 	 */
 	if (tls_emu || has_tls_reg)
-		memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4);
+		memcpy(vectors + 0xfe0, vectors + 0xfe8, 4);
 }
+#else
+static void __init kuser_init(void *vectors)
+{
+}
+#endif
 
 void __init early_trap_init(void *vectors_base)
 {
@@ -816,33 +825,30 @@ void __init early_trap_init(void *vectors_base)
 	unsigned long vectors = (unsigned long)vectors_base;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
-	extern char __kuser_helper_start[], __kuser_helper_end[];
-	int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+	unsigned i;
 
 	vectors_page = vectors_base;
 
+	/*
+	 * Poison the vectors page with an undefined instruction.  This
+	 * instruction is chosen to be undefined for both ARM and Thumb
+	 * ISAs.  The Thumb version is an undefined instruction with a
+	 * branch back to the undefined instruction.
+	 */
+	for (i = 0; i < PAGE_SIZE / sizeof(u32); i++)
+		((u32 *)vectors_base)[i] = 0xe7fddef1;
+
 	/*
 	 * Copy the vectors, stubs and kuser helpers (in entry-armv.S)
 	 * into the vector page, mapped at 0xffff0000, and ensure these
 	 * are visible to the instruction stream.
 	 */
 	memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
-	memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
-	memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+	memcpy((void *)vectors + 0x1000, __stubs_start, __stubs_end - __stubs_start);
 
-	/*
-	 * Do processor specific fixups for the kuser helpers
-	 */
-	kuser_get_tls_init(vectors);
-
-	/*
-	 * Copy signal return handlers into the vector page, and
-	 * set sigreturn to be a pointer to these.
-	 */
-	memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE),
-	       sigreturn_codes, sizeof(sigreturn_codes));
+	kuser_init(vectors_base);
 
-	flush_icache_range(vectors, vectors + PAGE_SIZE);
+	flush_icache_range(vectors, vectors + PAGE_SIZE * 2);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*

arch/arm/kernel/vmlinux.lds.S

@@ -148,6 +148,23 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
 #endif
+	/*
+	 * The vectors and stubs are relocatable code, and the
+	 * only thing that matters is their relative offsets
+	 */
+	__vectors_start = .;
+	.vectors 0 : AT(__vectors_start) {
+		*(.vectors)
+	}
+	. = __vectors_start + SIZEOF(.vectors);
+	__vectors_end = .;
+
+	__stubs_start = .;
+	.stubs 0x1000 : AT(__stubs_start) {
+		*(.stubs)
+	}
+	. = __stubs_start + SIZEOF(.stubs);
+	__stubs_end = .;
 
 	INIT_TEXT_SECTION(8)
 	.exit.text : {

arch/arm/lib/delay.c

@@ -86,7 +86,7 @@ void __init register_current_timer_delay(const struct delay_timer *timer)
 	}
 }
 
-unsigned long __cpuinit calibrate_delay_is_known(void)
+unsigned long calibrate_delay_is_known(void)
 {
 	delay_calibrated = true;
 	return lpj_fine;

arch/arm/mach-davinci/board-dm365-evm.c

@@ -505,7 +505,7 @@ static struct vpbe_output dm365evm_vpbe_outputs[] = {
 /*
  * Amplifiers on the board
  */
-struct ths7303_platform_data ths7303_pdata = {
+static struct ths7303_platform_data ths7303_pdata = {
 	.ch_1 = 3,
 	.ch_2 = 3,
 	.ch_3 = 3,

arch/arm/mach-davinci/dm355.c

@@ -860,7 +860,7 @@ static struct platform_device dm355_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm355_venc_pdata = {
+static struct venc_platform_data dm355_venc_pdata = {
 	.setup_pinmux	= dm355_vpbe_setup_pinmux,
 	.setup_clock	= dm355_venc_setup_clock,
 };

arch/arm/mach-davinci/dm365.c

@@ -1349,7 +1349,7 @@ static struct platform_device dm365_vpbe_display = {
 	},
 };
 
-struct venc_platform_data dm365_venc_pdata = {
+static struct venc_platform_data dm365_venc_pdata = {
 	.setup_pinmux	= dm365_vpbe_setup_pinmux,
 	.setup_clock	= dm365_venc_setup_clock,
 };

arch/arm/mach-exynos/Kconfig

@@ -92,6 +92,7 @@ config SOC_EXYNOS5440
 	bool "SAMSUNG EXYNOS5440"
 	default y
 	depends on ARCH_EXYNOS5
+	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR

arch/arm/mach-exynos/Makefile

@@ -14,7 +14,7 @@ obj-				:=
 
 obj-$(CONFIG_ARCH_EXYNOS)	+= common.o
 
-obj-$(CONFIG_PM)		+= pm.o
+obj-$(CONFIG_S5P_PM)		+= pm.o
 obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 

arch/arm/mach-exynos/common.c

@@ -58,7 +58,6 @@ static const char name_exynos5440[] = "EXYNOS5440";
 
 static void exynos4_map_io(void);
 static void exynos5_map_io(void);
-static void exynos5440_map_io(void);
 static int exynos_init(void);
 
 static struct cpu_table cpu_ids[] __initdata = {
@@ -95,7 +94,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 	}, {
 		.idcode		= EXYNOS5440_SOC_ID,
 		.idmask		= EXYNOS5_SOC_MASK,
-		.map_io		= exynos5440_map_io,
 		.init		= exynos_init,
 		.name		= name_exynos5440,
 	},
@@ -149,11 +147,6 @@ static struct map_desc exynos4_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
@@ -268,20 +261,6 @@ static struct map_desc exynos5_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(EXYNOS5_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
-	}, {
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5_PA_UART),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
-	},
-};
-
-static struct map_desc exynos5440_iodesc0[] __initdata = {
-	{
-		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(EXYNOS5440_PA_UART0),
-		.length		= SZ_512K,
-		.type		= MT_DEVICE,
 	},
 };
 
@@ -388,11 +367,6 @@ static void __init exynos5_map_io(void)
 		iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
 }
 
-static void __init exynos5440_map_io(void)
-{
-	iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
-}
-
 void __init exynos_init_time(void)
 {
 	of_clk_init(NULL);

arch/arm/mach-exynos/common.h

@@ -97,6 +97,5 @@ struct exynos_pmu_conf {
 };
 
 extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
 
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/cpuidle.c

@@ -25,6 +25,7 @@
 #include <mach/regs-pmu.h>
 
 #include <plat/cpu.h>
+#include <plat/pm.h>
 
 #include "common.h"
 

arch/arm/mach-exynos/headsmp.S

@@ -13,8 +13,6 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-	__CPUINIT
-
 /*
  * exynos4 specific entry point for secondary CPUs.  This provides
  * a "holding pen" into which all secondary cores are held until we're

arch/arm/mach-exynos/include/mach/memory.h

@@ -15,8 +15,13 @@
 
 #define PLAT_PHYS_OFFSET		UL(0x40000000)
 
+#ifndef CONFIG_ARM_LPAE
 /* Maximum of 256MiB in one bank */
 #define MAX_PHYSMEM_BITS	32
 #define SECTION_SIZE_BITS	28
+#else
+#define MAX_PHYSMEM_BITS	36
+#define SECTION_SIZE_BITS	31
+#endif
 
 #endif /* __ASM_ARCH_MEMORY_H */