Merge remote-tracking branches 'regulator/topic/lp8788', 'regulator/topic/mt6311', 'regulator/topic/optional', 'regulator/topic/palmas' and 'regulator/topic/pv88060' into regulator-next

Documentation/devicetree/bindings/regulator/pv88060.txt

@@ -0,0 +1,124 @@
+* Powerventure Semiconductor PV88060 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88060".
+- reg: I2C slave address, usually 0x49.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
+  SW5, and SW6.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+	pmic: pv88060@49 {
+		compatible = "pvs,pv88060";
+		reg = <0x49>;
+		interrupt-parent = <&gpio>;
+		interrupts = <24 24>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <4387500>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+				regulator-boot-on;
+			};
+
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			SW1 {
+				regulator-name = "sw1";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+
+			SW2 {
+				regulator-name = "sw2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW3 {
+				regulator-name = "sw3";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW4 {
+				regulator-name = "sw4";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW5 {
+				regulator-name = "sw5";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW6 {
+				regulator-name = "sw6";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+		};
+	};

drivers/regulator/Kconfig

@@ -514,6 +514,14 @@ config REGULATOR_PFUZE100
 	  Say y here to support the regulators found on the Freescale
 	  PFUZE100/PFUZE200 PMIC.
 
+config REGULATOR_PV88060
+	tristate "Powerventure Semiconductor PV88060 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the voltage regulators and convertors
+	  PV88060
+
 config REGULATOR_PWM
 	tristate "PWM voltage regulator"
 	depends on PWM

drivers/regulator/Makefile

@@ -67,6 +67,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
+obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o

drivers/regulator/core.c

@@ -3446,8 +3446,10 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = regulator_get(dev,
-						      consumers[i].supply);
+		consumers[i].consumer = _regulator_get(dev,
+						       consumers[i].supply,
+						       false,
+						       !consumers[i].optional);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",

drivers/regulator/devres.c

@@ -164,8 +164,11 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers,
 		consumers[i].consumer = NULL;
 
 	for (i = 0; i < num_consumers; i++) {
-		consumers[i].consumer = devm_regulator_get(dev,
-							   consumers[i].supply);
+		consumers[i].consumer = _devm_regulator_get(dev,
+							    consumers[i].supply,
+							    consumers[i].optional ?
+								OPTIONAL_GET :
+								NORMAL_GET);
 		if (IS_ERR(consumers[i].consumer)) {
 			ret = PTR_ERR(consumers[i].consumer);
 			dev_err(dev, "Failed to get supply '%s': %d\n",

drivers/regulator/lp8788-buck.c

@@ -344,7 +344,7 @@ static unsigned int lp8788_buck_get_mode(struct regulator_dev *rdev)
 				REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
 }
 
-static struct regulator_ops lp8788_buck12_ops = {
+static const struct regulator_ops lp8788_buck12_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = lp8788_buck12_set_voltage_sel,
@@ -357,7 +357,7 @@ static struct regulator_ops lp8788_buck12_ops = {
 	.get_mode = lp8788_buck_get_mode,
 };
 
-static struct regulator_ops lp8788_buck34_ops = {
+static const struct regulator_ops lp8788_buck34_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,

drivers/regulator/lp8788-ldo.c

@@ -170,7 +170,7 @@ static int lp8788_ldo_enable_time(struct regulator_dev *rdev)
 	return ENABLE_TIME_USEC * val;
 }
 
-static struct regulator_ops lp8788_ldo_voltage_table_ops = {
+static const struct regulator_ops lp8788_ldo_voltage_table_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
@@ -180,7 +180,7 @@ static struct regulator_ops lp8788_ldo_voltage_table_ops = {
 	.enable_time = lp8788_ldo_enable_time,
 };
 
-static struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
+static const struct regulator_ops lp8788_ldo_voltage_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -613,22 +613,20 @@ static struct platform_driver lp8788_aldo_driver = {
 	},
 };
 
+static struct platform_driver * const drivers[] = {
+	&lp8788_dldo_driver,
+	&lp8788_aldo_driver,
+};
+
 static int __init lp8788_ldo_init(void)
 {
-	int ret;
-
-	ret = platform_driver_register(&lp8788_dldo_driver);
-	if (ret)
-		return ret;
-
-	return platform_driver_register(&lp8788_aldo_driver);
+	return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
 }
 subsys_initcall(lp8788_ldo_init);
 
 static void __exit lp8788_ldo_exit(void)
 {
-	platform_driver_unregister(&lp8788_aldo_driver);
-	platform_driver_unregister(&lp8788_dldo_driver);
+	platform_unregister_drivers(drivers, ARRAY_SIZE(drivers));
 }
 module_exit(lp8788_ldo_exit);
 

drivers/regulator/mt6311-regulator.c

@@ -30,6 +30,7 @@ static const struct regmap_config mt6311_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = MT6311_FQMTR_CON4,
+	.cache_type = REGCACHE_RBTREE,
 };
 
 /* Default limits measured in millivolts and milliamps */

drivers/regulator/palmas-regulator.c

@@ -612,6 +612,18 @@ static struct regulator_ops palmas_ops_ldo = {
 	.map_voltage		= regulator_map_voltage_linear,
 };
 
+static struct regulator_ops palmas_ops_ldo9 = {
+	.is_enabled		= palmas_is_enabled_ldo,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.set_bypass		= regulator_set_bypass_regmap,
+	.get_bypass		= regulator_get_bypass_regmap,
+};
+
 static struct regulator_ops palmas_ops_ext_control_ldo = {
 	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
 	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
@@ -639,6 +651,19 @@ static struct regulator_ops tps65917_ops_ldo = {
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
 };
 
+static struct regulator_ops tps65917_ops_ldo_1_2 = {
+	.is_enabled		= palmas_is_enabled_ldo,
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_bypass		= regulator_set_bypass_regmap,
+	.get_bypass		= regulator_get_bypass_regmap,
+};
+
 static int palmas_regulator_config_external(struct palmas *palmas, int id,
 		struct palmas_reg_init *reg_init)
 {
@@ -915,6 +940,13 @@ static int palmas_ldo_registration(struct palmas_pmic *pmic,
 			if (pdata && pdata->ldo6_vibrator &&
 			    (id == PALMAS_REG_LDO6))
 				desc->enable_time = 2000;
+
+			if (id == PALMAS_REG_LDO9) {
+				desc->ops = &palmas_ops_ldo9;
+				desc->bypass_reg = desc->enable_reg;
+				desc->bypass_mask =
+						PALMAS_LDO9_CTRL_LDO_BYPASS_EN;
+			}
 		} else {
 			if (!ddata->has_regen3 && id == PALMAS_REG_REGEN3)
 				continue;
@@ -1019,6 +1051,13 @@ static int tps65917_ldo_registration(struct palmas_pmic *pmic,
 			 * It is of the order of ~60mV/uS.
 			 */
 			desc->ramp_delay = 2500;
+			if (id == TPS65917_REG_LDO1 ||
+			    id == TPS65917_REG_LDO2) {
+				desc->ops = &tps65917_ops_ldo_1_2;
+				desc->bypass_reg = desc->enable_reg;
+				desc->bypass_mask =
+						TPS65917_LDO1_CTRL_BYPASS_EN;
+			}
 		} else {
 			desc->n_voltages = 1;
 			if (reg_init && reg_init->roof_floor)

drivers/regulator/pv88060-regulator.c

@@ -0,0 +1,437 @@
+/*
+ * pv88060-regulator.c - Regulator device driver for PV88060
+ * Copyright (C) 2015  Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
+#include "pv88060-regulator.h"
+
+#define PV88060_MAX_REGULATORS	14
+
+/* PV88060 REGULATOR IDs */
+enum {
+	/* BUCKs */
+	PV88060_ID_BUCK1,
+
+	/* LDOs */
+	PV88060_ID_LDO1,
+	PV88060_ID_LDO2,
+	PV88060_ID_LDO3,
+	PV88060_ID_LDO4,
+	PV88060_ID_LDO5,
+	PV88060_ID_LDO6,
+	PV88060_ID_LDO7,
+
+	/* SWTs */
+	PV88060_ID_SW1,
+	PV88060_ID_SW2,
+	PV88060_ID_SW3,
+	PV88060_ID_SW4,
+	PV88060_ID_SW5,
+	PV88060_ID_SW6,
+};
+
+struct pv88060_regulator {
+	struct regulator_desc desc;
+	/* Current limiting */
+	unsigned	n_current_limits;
+	const int	*current_limits;
+	unsigned int limit_mask;
+	unsigned int conf;		/* buck configuration register */
+};
+
+struct pv88060 {
+	struct device *dev;
+	struct regmap *regmap;
+	struct regulator_dev *rdev[PV88060_MAX_REGULATORS];
+};
+
+static const struct regmap_config pv88060_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+/* Current limits array (in uA) for BUCK1
+ * Entry indexes corresponds to register values.
+ */
+
+static const int pv88060_buck1_limits[] = {
+	1496000, 2393000, 3291000, 4189000
+};
+
+static unsigned int pv88060_buck_get_mode(struct regulator_dev *rdev)
+{
+	struct pv88060_regulator *info = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret, mode = 0;
+
+	ret = regmap_read(rdev->regmap, info->conf, &data);
+	if (ret < 0)
+		return ret;
+
+	switch (data & PV88060_BUCK_MODE_MASK) {
+	case PV88060_BUCK_MODE_SYNC:
+		mode = REGULATOR_MODE_FAST;
+		break;
+	case PV88060_BUCK_MODE_AUTO:
+		mode = REGULATOR_MODE_NORMAL;
+		break;
+	case PV88060_BUCK_MODE_SLEEP:
+		mode = REGULATOR_MODE_STANDBY;
+		break;
+	}
+
+	return mode;
+}
+
+static int pv88060_buck_set_mode(struct regulator_dev *rdev,
+					unsigned int mode)
+{
+	struct pv88060_regulator *info = rdev_get_drvdata(rdev);
+	int val = 0;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = PV88060_BUCK_MODE_SYNC;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = PV88060_BUCK_MODE_AUTO;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		val = PV88060_BUCK_MODE_SLEEP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, info->conf,
+					PV88060_BUCK_MODE_MASK, val);
+}
+
+static int pv88060_set_current_limit(struct regulator_dev *rdev, int min,
+				    int max)
+{
+	struct pv88060_regulator *info = rdev_get_drvdata(rdev);
+	int i;
+
+	/* search for closest to maximum */
+	for (i = info->n_current_limits; i >= 0; i--) {
+		if (min <= info->current_limits[i]
+			&& max >= info->current_limits[i]) {
+			return regmap_update_bits(rdev->regmap,
+				info->conf,
+				info->limit_mask,
+				i << PV88060_BUCK_ILIM_SHIFT);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int pv88060_get_current_limit(struct regulator_dev *rdev)
+{
+	struct pv88060_regulator *info = rdev_get_drvdata(rdev);
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, info->conf, &data);
+	if (ret < 0)
+		return ret;
+
+	data = (data & info->limit_mask) >> PV88060_BUCK_ILIM_SHIFT;
+	return info->current_limits[data];
+}
+
+static struct regulator_ops pv88060_buck_ops = {
+	.get_mode = pv88060_buck_get_mode,
+	.set_mode = pv88060_buck_set_mode,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_current_limit = pv88060_set_current_limit,
+	.get_current_limit = pv88060_get_current_limit,
+};
+
+static struct regulator_ops pv88060_ldo_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+};
+
+#define PV88060_BUCK(chip, regl_name, min, step, max, limits_array) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88060_buck_ops,\
+		.min_uV = min,\
+		.uV_step = step,\
+		.n_voltages = ((max) - (min))/(step) + 1,\
+		.enable_reg = PV88060_REG_##regl_name##_CONF0,\
+		.enable_mask = PV88060_BUCK_EN, \
+		.vsel_reg = PV88060_REG_##regl_name##_CONF0,\
+		.vsel_mask = PV88060_VBUCK_MASK,\
+	},\
+	.current_limits = limits_array,\
+	.n_current_limits = ARRAY_SIZE(limits_array),\
+	.limit_mask = PV88060_BUCK_ILIM_MASK, \
+	.conf = PV88060_REG_##regl_name##_CONF1,\
+}
+
+#define PV88060_LDO(chip, regl_name, min, step, max) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88060_ldo_ops,\
+		.min_uV = min, \
+		.uV_step = step, \
+		.n_voltages = (step) ? ((max - min) / step + 1) : 1, \
+		.enable_reg = PV88060_REG_##regl_name##_CONF, \
+		.enable_mask = PV88060_LDO_EN, \
+		.vsel_reg = PV88060_REG_##regl_name##_CONF, \
+		.vsel_mask = PV88060_VLDO_MASK, \
+	},\
+}
+
+#define PV88060_SW(chip, regl_name, max) \
+{\
+	.desc	=	{\
+		.id = chip##_ID_##regl_name,\
+		.name = __stringify(chip##_##regl_name),\
+		.of_match = of_match_ptr(#regl_name),\
+		.regulators_node = of_match_ptr("regulators"),\
+		.type = REGULATOR_VOLTAGE,\
+		.owner = THIS_MODULE,\
+		.ops = &pv88060_ldo_ops,\
+		.min_uV = max,\
+		.uV_step = 0,\
+		.n_voltages = 1,\
+		.enable_reg = PV88060_REG_##regl_name##_CONF,\
+		.enable_mask = PV88060_SW_EN,\
+	},\
+}
+
+static const struct pv88060_regulator pv88060_regulator_info[] = {
+	PV88060_BUCK(PV88060, BUCK1, 2800000, 12500, 4387500,
+		pv88060_buck1_limits),
+	PV88060_LDO(PV88060, LDO1, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO2, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO3, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO4, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO5, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO6, 1200000, 50000, 3350000),
+	PV88060_LDO(PV88060, LDO7, 1200000, 50000, 3350000),
+	PV88060_SW(PV88060, SW1, 5000000),
+	PV88060_SW(PV88060, SW2, 5000000),
+	PV88060_SW(PV88060, SW3, 5000000),
+	PV88060_SW(PV88060, SW4, 5000000),
+	PV88060_SW(PV88060, SW5, 5000000),
+	PV88060_SW(PV88060, SW6, 5000000),
+};
+
+static irqreturn_t pv88060_irq_handler(int irq, void *data)
+{
+	struct pv88060 *chip = data;
+	int i, reg_val, err, ret = IRQ_NONE;
+
+	err = regmap_read(chip->regmap, PV88060_REG_EVENT_A, &reg_val);
+	if (err < 0)
+		goto error_i2c;
+
+	if (reg_val & PV88060_E_VDD_FLT) {
+		for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL) {
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_UNDER_VOLTAGE,
+					NULL);
+			}
+		}
+
+		err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A,
+			PV88060_E_VDD_FLT, PV88060_E_VDD_FLT);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	if (reg_val & PV88060_E_OVER_TEMP) {
+		for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
+			if (chip->rdev[i] != NULL) {
+				regulator_notifier_call_chain(chip->rdev[i],
+					REGULATOR_EVENT_OVER_TEMP,
+					NULL);
+			}
+		}
+
+		err = regmap_update_bits(chip->regmap, PV88060_REG_EVENT_A,
+			PV88060_E_OVER_TEMP, PV88060_E_OVER_TEMP);
+		if (err < 0)
+			goto error_i2c;
+
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+
+error_i2c:
+	dev_err(chip->dev, "I2C error : %d\n", err);
+	return IRQ_NONE;
+}
+
+/*
+ * I2C driver interface functions
+ */
+static int pv88060_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
+	struct pv88060 *chip;
+	struct regulator_config config = { };
+	int error, i, ret = 0;
+
+	chip = devm_kzalloc(&i2c->dev, sizeof(struct pv88060), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	chip->dev = &i2c->dev;
+	chip->regmap = devm_regmap_init_i2c(i2c, &pv88060_regmap_config);
+	if (IS_ERR(chip->regmap)) {
+		error = PTR_ERR(chip->regmap);
+		dev_err(chip->dev, "Failed to allocate register map: %d\n",
+			error);
+		return error;
+	}
+
+	i2c_set_clientdata(i2c, chip);
+
+	if (i2c->irq != 0) {
+		ret = regmap_write(chip->regmap, PV88060_REG_MASK_A, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask A reg: %d\n", ret);
+			return ret;
+		}
+
+		ret = regmap_write(chip->regmap, PV88060_REG_MASK_B, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask B reg: %d\n", ret);
+			return ret;
+		}
+
+		ret = regmap_write(chip->regmap, PV88060_REG_MASK_C, 0xFF);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to mask C reg: %d\n", ret);
+			return ret;
+		}
+
+		ret = devm_request_threaded_irq(&i2c->dev, i2c->irq, NULL,
+					pv88060_irq_handler,
+					IRQF_TRIGGER_LOW|IRQF_ONESHOT,
+					"pv88060", chip);
+		if (ret != 0) {
+			dev_err(chip->dev, "Failed to request IRQ: %d\n",
+				i2c->irq);
+			return ret;
+		}
+
+		ret = regmap_update_bits(chip->regmap, PV88060_REG_MASK_A,
+			PV88060_M_VDD_FLT | PV88060_M_OVER_TEMP, 0);
+		if (ret < 0) {
+			dev_err(chip->dev,
+				"Failed to update mask reg: %d\n", ret);
+			return ret;
+		}
+
+	} else {
+		dev_warn(chip->dev, "No IRQ configured\n");
+	}
+
+	config.dev = chip->dev;
+	config.regmap = chip->regmap;
+
+	for (i = 0; i < PV88060_MAX_REGULATORS; i++) {
+		if (init_data)
+			config.init_data = &init_data[i];
+
+		config.driver_data = (void *)&pv88060_regulator_info[i];
+		chip->rdev[i] = devm_regulator_register(chip->dev,
+			&pv88060_regulator_info[i].desc, &config);
+		if (IS_ERR(chip->rdev[i])) {
+			dev_err(chip->dev,
+				"Failed to register PV88060 regulator\n");
+			return PTR_ERR(chip->rdev[i]);
+		}
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id pv88060_i2c_id[] = {
+	{"pv88060", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, pv88060_i2c_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88060_dt_ids[] = {
+	{ .compatible = "pvs,pv88060", .data = &pv88060_i2c_id[0] },
+	{},
+};
+MODULE_DEVICE_TABLE(of, pv88060_dt_ids);
+#endif
+
+static struct i2c_driver pv88060_regulator_driver = {
+	.driver = {
+		.name = "pv88060",
+		.of_match_table = of_match_ptr(pv88060_dt_ids),
+	},
+	.probe = pv88060_i2c_probe,
+	.id_table = pv88060_i2c_id,
+};
+
+module_i2c_driver(pv88060_regulator_driver);
+
+MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
+MODULE_DESCRIPTION("Regulator device driver for Powerventure PV88060");
+MODULE_LICENSE("GPL");

drivers/regulator/pv88060-regulator.h

@@ -0,0 +1,69 @@
+/*
+ * pv88060-regulator.h - Regulator definitions for PV88060
+ * Copyright (C) 2015 Powerventure Semiconductor Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __PV88060_REGISTERS_H__
+#define __PV88060_REGISTERS_H__
+
+/* System Control and Event Registers */
+#define	PV88060_REG_EVENT_A			0x04
+#define	PV88060_REG_MASK_A			0x08
+#define	PV88060_REG_MASK_B			0x09
+#define	PV88060_REG_MASK_C			0x0A
+
+/* Regulator Registers */
+#define	PV88060_REG_BUCK1_CONF0			0x1B
+#define	PV88060_REG_BUCK1_CONF1			0x1C
+#define	PV88060_REG_LDO1_CONF			0x1D
+#define	PV88060_REG_LDO2_CONF			0x1E
+#define	PV88060_REG_LDO3_CONF			0x1F
+#define	PV88060_REG_LDO4_CONF			0x20
+#define	PV88060_REG_LDO5_CONF			0x21
+#define	PV88060_REG_LDO6_CONF			0x22
+#define	PV88060_REG_LDO7_CONF			0x23
+
+#define	PV88060_REG_SW1_CONF			0x3B
+#define	PV88060_REG_SW2_CONF			0x3C
+#define	PV88060_REG_SW3_CONF			0x3D
+#define	PV88060_REG_SW4_CONF			0x3E
+#define	PV88060_REG_SW5_CONF			0x3F
+#define	PV88060_REG_SW6_CONF			0x40
+
+/* PV88060_REG_EVENT_A (addr=0x04) */
+#define	PV88060_E_VDD_FLT			0x01
+#define	PV88060_E_OVER_TEMP			0x02
+
+/* PV88060_REG_MASK_A (addr=0x08) */
+#define	PV88060_M_VDD_FLT			0x01
+#define	PV88060_M_OVER_TEMP			0x02
+
+/* PV88060_REG_BUCK1_CONF0 (addr=0x1B) */
+#define	PV88060_BUCK_EN			0x80
+#define PV88060_VBUCK_MASK			0x7F
+/* PV88060_REG_LDO1/2/3/4/5/6/7_CONT */
+#define	PV88060_LDO_EN			0x40
+#define PV88060_VLDO_MASK			0x3F
+/* PV88060_REG_SW1/2/3/4/5_CONF */
+#define	PV88060_SW_EN			0x80
+
+/* PV88060_REG_BUCK1_CONF1 (addr=0x1C) */
+#define	PV88060_BUCK_ILIM_SHIFT			2
+#define	PV88060_BUCK_ILIM_MASK			0x0C
+#define	PV88060_BUCK_MODE_SHIFT			0
+#define	PV88060_BUCK_MODE_MASK			0x03
+#define	PV88060_BUCK_MODE_SLEEP			0x00
+#define	PV88060_BUCK_MODE_AUTO			0x01
+#define	PV88060_BUCK_MODE_SYNC			0x02
+
+#endif	/* __PV88060_REGISTERS_H__ */

include/linux/regulator/consumer.h

@@ -140,6 +140,8 @@ struct regulator;
  *
  * @supply:   The name of the supply.  Initialised by the user before
  *            using the bulk regulator APIs.
+ * @optional: The supply should be considered optional. Initialised by the user
+ *            before using the bulk regulator APIs.
  * @consumer: The regulator consumer for the supply.  This will be managed
  *            by the bulk API.
  *
@@ -149,6 +151,7 @@ struct regulator;
  */
 struct regulator_bulk_data {
 	const char *supply;
+	bool optional;
 	struct regulator *consumer;
 
 	/* private: Internal use */