net: dsa: b53: Implement software reset for 58xx devices

Implement the correct software reset sequence for 58xx devices by
setting all 3 reset bits and polling for the SW_RST bit to clear itself
without a given timeout. We cannot use is58xx() here because that would
also include the 7445/7278 Starfighter 2 which have their own driver
doing the reset earlier on due to the HW specific integration.

Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/dsa/b53/b53_common.c

@@ -608,7 +608,8 @@ static void b53_switch_reset_gpio(struct b53_device *dev)
 
 static int b53_switch_reset(struct b53_device *dev)
 {
-	u8 mgmt;
+	unsigned int timeout = 1000;
+	u8 mgmt, reg;
 
 	b53_switch_reset_gpio(dev);
 
@@ -617,6 +618,28 @@ static int b53_switch_reset(struct b53_device *dev)
 		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00);
 	}
 
+	/* This is specific to 58xx devices here, do not use is58xx() which
+	 * covers the larger Starfigther 2 family, including 7445/7278 which
+	 * still use this driver as a library and need to perform the reset
+	 * earlier.
+	 */
+	if (dev->chip_id == BCM58XX_DEVICE_ID) {
+		b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+		reg |= SW_RST | EN_SW_RST | EN_CH_RST;
+		b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg);
+
+		do {
+			b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, &reg);
+			if (!(reg & SW_RST))
+				break;
+
+			usleep_range(1000, 2000);
+		} while (timeout-- > 0);
+
+		if (timeout == 0)
+			return -ETIMEDOUT;
+	}
+
 	b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt);
 
 	if (!(mgmt & SM_SW_FWD_EN)) {

drivers/net/dsa/b53/b53_regs.h

@@ -143,6 +143,7 @@
 /* Software reset register (8 bit) */
 #define B53_SOFTRESET			0x79
 #define   SW_RST			BIT(7)
+#define   EN_CH_RST			BIT(6)
 #define   EN_SW_RST			BIT(4)
 
 /* Fast Aging Control register (8 bit) */