Browse Source

mmc: core: Factor out mmc_host_set_uhs_voltage()

Factor out mmc_host_set_uhs_voltage() so it can be reused.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adrian Hunter 7 years ago
parent
commit
3f496afb6f
2 changed files with 25 additions and 14 deletions
  1. 24 14
      drivers/mmc/core/core.c
  2. 1 0
      drivers/mmc/core/core.h

+ 24 - 14
drivers/mmc/core/core.c

@@ -1672,11 +1672,33 @@ int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage)
 
 }
 
+int mmc_host_set_uhs_voltage(struct mmc_host *host)
+{
+	u32 clock;
+
+	/*
+	 * During a signal voltage level switch, the clock must be gated
+	 * for 5 ms according to the SD spec
+	 */
+	clock = host->ios.clock;
+	host->ios.clock = 0;
+	mmc_set_ios(host);
+
+	if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180))
+		return -EAGAIN;
+
+	/* Keep clock gated for at least 10 ms, though spec only says 5 ms */
+	mmc_delay(10);
+	host->ios.clock = clock;
+	mmc_set_ios(host);
+
+	return 0;
+}
+
 int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
 {
 	struct mmc_command cmd = {};
 	int err = 0;
-	u32 clock;
 
 	/*
 	 * If we cannot switch voltages, return failure so the caller
@@ -1708,15 +1730,8 @@ int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
 		err = -EAGAIN;
 		goto power_cycle;
 	}
-	/*
-	 * During a signal voltage level switch, the clock must be gated
-	 * for 5 ms according to the SD spec
-	 */
-	clock = host->ios.clock;
-	host->ios.clock = 0;
-	mmc_set_ios(host);
 
-	if (mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180)) {
+	if (mmc_host_set_uhs_voltage(host)) {
 		/*
 		 * Voltages may not have been switched, but we've already
 		 * sent CMD11, so a power cycle is required anyway
@@ -1725,11 +1740,6 @@ int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr)
 		goto power_cycle;
 	}
 
-	/* Keep clock gated for at least 10 ms, though spec only says 5 ms */
-	mmc_delay(10);
-	host->ios.clock = clock;
-	mmc_set_ios(host);
-
 	/* Wait for at least 1 ms according to spec */
 	mmc_delay(1);
 

+ 1 - 0
drivers/mmc/core/core.h

@@ -49,6 +49,7 @@ void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
 void mmc_set_bus_width(struct mmc_host *host, unsigned int width);
 u32 mmc_select_voltage(struct mmc_host *host, u32 ocr);
 int mmc_set_uhs_voltage(struct mmc_host *host, u32 ocr);
+int mmc_host_set_uhs_voltage(struct mmc_host *host);
 int mmc_set_signal_voltage(struct mmc_host *host, int signal_voltage);
 void mmc_set_timing(struct mmc_host *host, unsigned int timing);
 void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type);