|
@@ -18,10 +18,30 @@
|
|
|
#include <linux/mtd/rawnand.h>
|
|
|
|
|
|
/*
|
|
|
- * Special Micron status bit that indicates when the block has been
|
|
|
- * corrected by on-die ECC and should be rewritten
|
|
|
+ * Special Micron status bit 3 indicates that the block has been
|
|
|
+ * corrected by on-die ECC and should be rewritten.
|
|
|
*/
|
|
|
-#define NAND_STATUS_WRITE_RECOMMENDED BIT(3)
|
|
|
+#define NAND_ECC_STATUS_WRITE_RECOMMENDED BIT(3)
|
|
|
+
|
|
|
+/*
|
|
|
+ * On chips with 8-bit ECC and additional bit can be used to distinguish
|
|
|
+ * cases where a errors were corrected without needing a rewrite
|
|
|
+ *
|
|
|
+ * Bit 4 Bit 3 Bit 0 Description
|
|
|
+ * ----- ----- ----- -----------
|
|
|
+ * 0 0 0 No Errors
|
|
|
+ * 0 0 1 Multiple uncorrected errors
|
|
|
+ * 0 1 0 4 - 6 errors corrected, recommend rewrite
|
|
|
+ * 0 1 1 Reserved
|
|
|
+ * 1 0 0 1 - 3 errors corrected
|
|
|
+ * 1 0 1 Reserved
|
|
|
+ * 1 1 0 7 - 8 errors corrected, recommend rewrite
|
|
|
+ */
|
|
|
+#define NAND_ECC_STATUS_MASK (BIT(4) | BIT(3) | BIT(0))
|
|
|
+#define NAND_ECC_STATUS_UNCORRECTABLE BIT(0)
|
|
|
+#define NAND_ECC_STATUS_4_6_CORRECTED BIT(3)
|
|
|
+#define NAND_ECC_STATUS_1_3_CORRECTED BIT(4)
|
|
|
+#define NAND_ECC_STATUS_7_8_CORRECTED (BIT(4) | BIT(3))
|
|
|
|
|
|
struct nand_onfi_vendor_micron {
|
|
|
u8 two_plane_read;
|
|
@@ -74,8 +94,9 @@ static int micron_nand_onfi_init(struct nand_chip *chip)
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
|
- struct mtd_oob_region *oobregion)
|
|
|
+static int micron_nand_on_die_4_ooblayout_ecc(struct mtd_info *mtd,
|
|
|
+ int section,
|
|
|
+ struct mtd_oob_region *oobregion)
|
|
|
{
|
|
|
if (section >= 4)
|
|
|
return -ERANGE;
|
|
@@ -86,8 +107,9 @@ static int micron_nand_on_die_ooblayout_ecc(struct mtd_info *mtd, int section,
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
|
|
|
- struct mtd_oob_region *oobregion)
|
|
|
+static int micron_nand_on_die_4_ooblayout_free(struct mtd_info *mtd,
|
|
|
+ int section,
|
|
|
+ struct mtd_oob_region *oobregion)
|
|
|
{
|
|
|
if (section >= 4)
|
|
|
return -ERANGE;
|
|
@@ -98,9 +120,44 @@ static int micron_nand_on_die_ooblayout_free(struct mtd_info *mtd, int section,
|
|
|
return 0;
|
|
|
}
|
|
|
|
|
|
-static const struct mtd_ooblayout_ops micron_nand_on_die_ooblayout_ops = {
|
|
|
- .ecc = micron_nand_on_die_ooblayout_ecc,
|
|
|
- .free = micron_nand_on_die_ooblayout_free,
|
|
|
+static const struct mtd_ooblayout_ops micron_nand_on_die_4_ooblayout_ops = {
|
|
|
+ .ecc = micron_nand_on_die_4_ooblayout_ecc,
|
|
|
+ .free = micron_nand_on_die_4_ooblayout_free,
|
|
|
+};
|
|
|
+
|
|
|
+static int micron_nand_on_die_8_ooblayout_ecc(struct mtd_info *mtd,
|
|
|
+ int section,
|
|
|
+ struct mtd_oob_region *oobregion)
|
|
|
+{
|
|
|
+ struct nand_chip *chip = mtd_to_nand(mtd);
|
|
|
+
|
|
|
+ if (section)
|
|
|
+ return -ERANGE;
|
|
|
+
|
|
|
+ oobregion->offset = mtd->oobsize - chip->ecc.total;
|
|
|
+ oobregion->length = chip->ecc.total;
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int micron_nand_on_die_8_ooblayout_free(struct mtd_info *mtd,
|
|
|
+ int section,
|
|
|
+ struct mtd_oob_region *oobregion)
|
|
|
+{
|
|
|
+ struct nand_chip *chip = mtd_to_nand(mtd);
|
|
|
+
|
|
|
+ if (section)
|
|
|
+ return -ERANGE;
|
|
|
+
|
|
|
+ oobregion->offset = 2;
|
|
|
+ oobregion->length = mtd->oobsize - chip->ecc.total - 2;
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static const struct mtd_ooblayout_ops micron_nand_on_die_8_ooblayout_ops = {
|
|
|
+ .ecc = micron_nand_on_die_8_ooblayout_ecc,
|
|
|
+ .free = micron_nand_on_die_8_ooblayout_free,
|
|
|
};
|
|
|
|
|
|
static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
|
|
@@ -113,6 +170,55 @@ static int micron_nand_on_die_ecc_setup(struct nand_chip *chip, bool enable)
|
|
|
return nand_set_features(chip, ONFI_FEATURE_ON_DIE_ECC, feature);
|
|
|
}
|
|
|
|
|
|
+static int micron_nand_on_die_ecc_status_4(struct nand_chip *chip, u8 status)
|
|
|
+{
|
|
|
+ struct mtd_info *mtd = nand_to_mtd(chip);
|
|
|
+
|
|
|
+ /*
|
|
|
+ * The internal ECC doesn't tell us the number of bitflips
|
|
|
+ * that have been corrected, but tells us if it recommends to
|
|
|
+ * rewrite the block. If it's the case, then we pretend we had
|
|
|
+ * a number of bitflips equal to the ECC strength, which will
|
|
|
+ * hint the NAND core to rewrite the block.
|
|
|
+ */
|
|
|
+ if (status & NAND_STATUS_FAIL) {
|
|
|
+ mtd->ecc_stats.failed++;
|
|
|
+ } else if (status & NAND_ECC_STATUS_WRITE_RECOMMENDED) {
|
|
|
+ mtd->ecc_stats.corrected += chip->ecc.strength;
|
|
|
+ return chip->ecc.strength;
|
|
|
+ }
|
|
|
+
|
|
|
+ return 0;
|
|
|
+}
|
|
|
+
|
|
|
+static int micron_nand_on_die_ecc_status_8(struct nand_chip *chip, u8 status)
|
|
|
+{
|
|
|
+ struct mtd_info *mtd = nand_to_mtd(chip);
|
|
|
+
|
|
|
+ /*
|
|
|
+ * With 8/512 we have more information but still don't know precisely
|
|
|
+ * how many bit-flips were seen.
|
|
|
+ */
|
|
|
+ switch (status & NAND_ECC_STATUS_MASK) {
|
|
|
+ case NAND_ECC_STATUS_UNCORRECTABLE:
|
|
|
+ mtd->ecc_stats.failed++;
|
|
|
+ return 0;
|
|
|
+ case NAND_ECC_STATUS_1_3_CORRECTED:
|
|
|
+ mtd->ecc_stats.corrected += 3;
|
|
|
+ return 3;
|
|
|
+ case NAND_ECC_STATUS_4_6_CORRECTED:
|
|
|
+ mtd->ecc_stats.corrected += 6;
|
|
|
+ /* rewrite recommended */
|
|
|
+ return 6;
|
|
|
+ case NAND_ECC_STATUS_7_8_CORRECTED:
|
|
|
+ mtd->ecc_stats.corrected += 8;
|
|
|
+ /* rewrite recommended */
|
|
|
+ return 8;
|
|
|
+ default:
|
|
|
+ return 0;
|
|
|
+ }
|
|
|
+}
|
|
|
+
|
|
|
static int
|
|
|
micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
|
|
|
uint8_t *buf, int oob_required,
|
|
@@ -137,19 +243,10 @@ micron_nand_read_page_on_die_ecc(struct mtd_info *mtd, struct nand_chip *chip,
|
|
|
if (ret)
|
|
|
goto out;
|
|
|
|
|
|
- if (status & NAND_STATUS_FAIL) {
|
|
|
- mtd->ecc_stats.failed++;
|
|
|
- } else if (status & NAND_STATUS_WRITE_RECOMMENDED) {
|
|
|
- /*
|
|
|
- * The internal ECC doesn't tell us the number of bitflips
|
|
|
- * that have been corrected, but tells us if it recommends to
|
|
|
- * rewrite the block. If it's the case, then we pretend we had
|
|
|
- * a number of bitflips equal to the ECC strength, which will
|
|
|
- * hint the NAND core to rewrite the block.
|
|
|
- */
|
|
|
- mtd->ecc_stats.corrected += chip->ecc.strength;
|
|
|
- max_bitflips = chip->ecc.strength;
|
|
|
- }
|
|
|
+ if (chip->ecc.strength == 4)
|
|
|
+ max_bitflips = micron_nand_on_die_ecc_status_4(chip, status);
|
|
|
+ else
|
|
|
+ max_bitflips = micron_nand_on_die_ecc_status_8(chip, status);
|
|
|
|
|
|
ret = nand_read_data_op(chip, buf, mtd->writesize, false);
|
|
|
if (!ret && oob_required)
|
|
@@ -254,10 +351,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
|
|
|
return MICRON_ON_DIE_MANDATORY;
|
|
|
|
|
|
/*
|
|
|
- * Some Micron NANDs have an on-die ECC of 4/512, some other
|
|
|
- * 8/512. We only support the former.
|
|
|
+ * We only support on-die ECC of 4/512 or 8/512
|
|
|
*/
|
|
|
- if (chip->ecc_strength_ds != 4)
|
|
|
+ if (chip->ecc_strength_ds != 4 && chip->ecc_strength_ds != 8)
|
|
|
return MICRON_ON_DIE_UNSUPPORTED;
|
|
|
|
|
|
return MICRON_ON_DIE_SUPPORTED;
|
|
@@ -289,16 +385,21 @@ static int micron_nand_init(struct nand_chip *chip)
|
|
|
return -EINVAL;
|
|
|
}
|
|
|
|
|
|
- chip->ecc.bytes = 8;
|
|
|
+ if (chip->ecc_strength_ds == 4)
|
|
|
+ mtd_set_ooblayout(mtd,
|
|
|
+ µn_nand_on_die_4_ooblayout_ops);
|
|
|
+ else
|
|
|
+ mtd_set_ooblayout(mtd,
|
|
|
+ µn_nand_on_die_8_ooblayout_ops);
|
|
|
+
|
|
|
+ chip->ecc.bytes = chip->ecc_strength_ds * 2;
|
|
|
chip->ecc.size = 512;
|
|
|
- chip->ecc.strength = 4;
|
|
|
+ chip->ecc.strength = chip->ecc_strength_ds;
|
|
|
chip->ecc.algo = NAND_ECC_BCH;
|
|
|
chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
|
|
|
chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
|
|
|
chip->ecc.read_page_raw = nand_read_page_raw;
|
|
|
chip->ecc.write_page_raw = nand_write_page_raw;
|
|
|
-
|
|
|
- mtd_set_ooblayout(mtd, µn_nand_on_die_ooblayout_ops);
|
|
|
}
|
|
|
|
|
|
return 0;
|