Merge tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner:

For general soc-specific changes the rk322x socs got their correct grf
compatible set. Other than that there are some board-specific changes
like the Rock2 getting its otg port, recovery and power keys enabled.

The vyasa board gained an enabled emmc node and the phyCORE boards
got UHS speeds in their sd card and a fixed sd-card power supply.

Finally the veyron boards dropped a nonstandard and unused property.

* tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square
  ARM: dts: rockchip: add recovery button for Rock2 Square
  ARM: dts: rockchip: add power key for Rock2 Square
  ARM: dts: rockchip: Add eMMC node for rk3288-vyasa
  ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK
  ARM: dts: rockchip: Fix supply node for card's power on phycore som
  ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node
  ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'

arch/arm/boot/dts/rk322x.dtsi

@@ -233,7 +233,7 @@
 	};
 
 	grf: syscon@11000000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "rockchip,rk3228-grf", "syscon", "simple-mfd";
 		reg = <0x11000000 0x1000>;
 		#address-cells = <1>;
 		#size-cells = <1>;

arch/arm/boot/dts/rk3288-phycore-rdk.dts

@@ -265,7 +265,11 @@
 	disable-wp;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-	vmmc-supply = <&vdd_io_sd>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vdd_sd>;
 	vqmmc-supply = <&vdd_io_sd>;
 	status = "okay";
 };

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -336,11 +336,10 @@
 				regulator-name = "vdd_io_sd";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
+					regulator-off-in-suspend;
 				};
 			};
 		};

arch/arm/boot/dts/rk3288-rock2-som.dtsi

@@ -280,6 +280,10 @@
 	};
 };
 
+&saradc {
+	vref-supply = <&vcc_18>;
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
 	rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -39,6 +39,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3288-rock2-som.dtsi"
 
 / {
@@ -49,6 +50,32 @@
 		stdout-path = "serial2:115200n8";
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		power {
+			gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
+			label = "GPIO Power";
+			linux,code = <KEY_POWER>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pwr_key>;
+			wakeup-source;
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 
@@ -220,6 +247,12 @@
 		};
 	};
 
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	pmic {
 		pmic_int: pmic-int {
 			rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -261,6 +294,10 @@
 	};
 };
 
+&saradc {
+	status = "okay";
+};
+
 &spdif {
 	status = "okay";
 };
@@ -284,3 +321,7 @@
 &usb_host1 {
 	status = "okay";
 };
+
+&usb_otg {
+	status = "okay";
+};

arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi

@@ -92,7 +92,6 @@
 			248 249 250 251 252 253 254 255>;
 		default-brightness-level = <128>;
 		enable-gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
-		backlight-boot-off;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bl_en>;
 		pwms = <&pwm0 0 1000000 0>;

arch/arm/boot/dts/rk3288-vyasa.dts

@@ -155,6 +155,17 @@
 	cpu0-supply = <&vdd_cpu>;
 };
 
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	status = "okay";
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>;