phy: qcom-ufs: Add support to set phy mode

Adding support to set desired UFS phy mode that can be set
from the host controller.

Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/qualcomm/phy-qcom-ufs-i.h

@@ -115,6 +115,8 @@ struct ufs_qcom_phy {
 	int cached_regs_table_size;
 	bool is_powered_on;
 	struct ufs_qcom_phy_specific_ops *phy_spec_ops;
+
+	enum phy_mode mode;
 };
 
 /**

drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c

@@ -52,6 +52,19 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
 	return 0;
 }
 
+static
+int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
 static
 void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
@@ -102,6 +115,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_14nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_14nm_set_mode,
 	.owner		= THIS_MODULE,
 };
 

drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c

@@ -71,6 +71,19 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
 	return 0;
 }
 
+static
+int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+{
+	struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+
+	phy_common->mode = PHY_MODE_INVALID;
+
+	if (mode > 0)
+		phy_common->mode = mode;
+
+	return 0;
+}
+
 static
 void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
 {
@@ -160,6 +173,7 @@ static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
 	.exit		= ufs_qcom_phy_qmp_20nm_exit,
 	.power_on	= ufs_qcom_phy_power_on,
 	.power_off	= ufs_qcom_phy_power_off,
+	.set_mode	= ufs_qcom_phy_qmp_20nm_set_mode,
 	.owner		= THIS_MODULE,
 };