Merge branch 'sa1100' into devel

Documentation/DocBook/tracepoint.tmpl

@@ -86,4 +86,9 @@
 !Iinclude/trace/events/irq.h
   </chapter>
 
+  <chapter id="signal">
+   <title>SIGNAL</title>
+!Iinclude/trace/events/signal.h
+  </chapter>
+
 </book>

Documentation/RCU/trace.txt

@@ -1,185 +1,10 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcupreempt and rcutree implementations of RCU provide debugfs trace
-output that summarizes counters and state.  This information is useful for
-debugging RCU itself, and can sometimes also help to debug abuses of RCU.
-Note that the rcuclassic implementation of RCU does not provide debugfs
-trace output.
-
-The following sections describe the debugfs files and formats for
-preemptable RCU (rcupreempt) and hierarchical RCU (rcutree).
-
-
-Preemptable RCU debugfs Files and Formats
-
-This implementation of RCU provides three debugfs files under the
-top-level directory RCU: rcu/rcuctrs (which displays the per-CPU
-counters used by preemptable RCU) rcu/rcugp (which displays grace-period
-counters), and rcu/rcustats (which internal counters for debugging RCU).
-
-The output of "cat rcu/rcuctrs" looks as follows:
-
-CPU last cur F M
-  0    5  -5 0 0
-  1   -1   0 0 0
-  2    0   1 0 0
-  3    0   1 0 0
-  4    0   1 0 0
-  5    0   1 0 0
-  6    0   2 0 0
-  7    0  -1 0 0
-  8    0   1 0 0
-ggp = 26226, state = waitzero
-
-The per-CPU fields are as follows:
-
-o	"CPU" gives the CPU number.  Offline CPUs are not displayed.
-
-o	"last" gives the value of the counter that is being decremented
-	for the current grace period phase.  In the example above,
-	the counters sum to 4, indicating that there are still four
-	RCU read-side critical sections still running that started
-	before the last counter flip.
-
-o	"cur" gives the value of the counter that is currently being
-	both incremented (by rcu_read_lock()) and decremented (by
-	rcu_read_unlock()).  In the example above, the counters sum to
-	1, indicating that there is only one RCU read-side critical section
-	still running that started after the last counter flip.
-
-o	"F" indicates whether RCU is waiting for this CPU to acknowledge
-	a counter flip.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitack".
-
-o	"M" indicates whether RCU is waiting for this CPU to execute a
-	memory barrier.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitmb".
-
-o	"ggp" is the global grace-period counter.
-
-o	"state" is the RCU state, which can be one of the following:
-
-	o	"idle": there is no grace period in progress.
-
-	o	"waitack": RCU just incremented the global grace-period
-		counter, which has the effect of reversing the roles of
-		the "last" and "cur" counters above, and is waiting for
-		all the CPUs to acknowledge the flip.  Once the flip has
-		been acknowledged, CPUs will no longer be incrementing
-		what are now the "last" counters, so that their sum will
-		decrease monotonically down to zero.
-
-	o	"waitzero": RCU is waiting for the sum of the "last" counters
-		to decrease to zero.
-
-	o	"waitmb": RCU is waiting for each CPU to execute a memory
-		barrier, which ensures that instructions from a given CPU's
-		last RCU read-side critical section cannot be reordered
-		with instructions following the memory-barrier instruction.
-
-The output of "cat rcu/rcugp" looks as follows:
-
-oldggp=48870  newggp=48873
-
-Note that reading from this file provokes a synchronize_rcu().  The
-"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before
-executing the synchronize_rcu(), and the "newggp" value is also the
-"ggp" value, but taken after the synchronize_rcu() command returns.
-
-
-The output of "cat rcu/rcugp" looks as follows:
-
-na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871
-1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640
-z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639
-
-These are counters tracking internal preemptable-RCU events, however,
-some of them may be useful for debugging algorithms using RCU.  In
-particular, the "nl", "wl", and "dl" values track the number of RCU
-callbacks in various states.  The fields are as follows:
-
-o	"na" is the total number of RCU callbacks that have been enqueued
-	since boot.
-
-o	"nl" is the number of RCU callbacks waiting for the previous
-	grace period to end so that they can start waiting on the next
-	grace period.
-
-o	"wa" is the total number of RCU callbacks that have started waiting
-	for a grace period since boot.  "na" should be roughly equal to
-	"nl" plus "wa".
-
-o	"wl" is the number of RCU callbacks currently waiting for their
-	grace period to end.
-
-o	"da" is the total number of RCU callbacks whose grace periods
-	have completed since boot.  "wa" should be roughly equal to
-	"wl" plus "da".
-
-o	"dr" is the total number of RCU callbacks that have been removed
-	from the list of callbacks ready to invoke.  "dr" should be roughly
-	equal to "da".
-
-o	"di" is the total number of RCU callbacks that have been invoked
-	since boot.  "di" should be roughly equal to "da", though some
-	early versions of preemptable RCU had a bug so that only the
-	last CPU's count of invocations was displayed, rather than the
-	sum of all CPU's counts.
-
-o	"1" is the number of calls to rcu_try_flip().  This should be
-	roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1"
-	described below.  In other words, the number of times that
-	the state machine is visited should be equal to the sum of the
-	number of times that each state is visited plus the number of
-	times that the state-machine lock acquisition failed.
-
-o	"e1" is the number of times that rcu_try_flip() was unable to
-	acquire the fliplock.
-
-o	"i1" is the number of calls to rcu_try_flip_idle().
-
-o	"ie1" is the number of times rcu_try_flip_idle() exited early
-	due to the calling CPU having no work for RCU.
-
-o	"g1" is the number of times that rcu_try_flip_idle() decided
-	to start a new grace period.  "i1" should be roughly equal to
-	"ie1" plus "g1".
-
-o	"a1" is the number of calls to rcu_try_flip_waitack().
-
-o	"ae1" is the number of times that rcu_try_flip_waitack() found
-	that at least one CPU had not yet acknowledge the new grace period
-	(AKA "counter flip").
-
-o	"a2" is the number of time rcu_try_flip_waitack() found that
-	all CPUs had acknowledged.  "a1" should be roughly equal to
-	"ae1" plus "a2".  (This particular output was collected on
-	a 128-CPU machine, hence the smaller-than-usual fraction of
-	calls to rcu_try_flip_waitack() finding all CPUs having already
-	acknowledged.)
-
-o	"z1" is the number of calls to rcu_try_flip_waitzero().
-
-o	"ze1" is the number of times that rcu_try_flip_waitzero() found
-	that not all of the old RCU read-side critical sections had
-	completed.
-
-o	"z2" is the number of times that rcu_try_flip_waitzero() finds
-	the sum of the counters equal to zero, in other words, that
-	all of the old RCU read-side critical sections had completed.
-	The value of "z1" should be roughly equal to "ze1" plus
-	"z2".
-
-o	"m1" is the number of calls to rcu_try_flip_waitmb().
-
-o	"me1" is the number of times that rcu_try_flip_waitmb() finds
-	that at least one CPU has not yet executed a memory barrier.
-
-o	"m2" is the number of times that rcu_try_flip_waitmb() finds that
-	all CPUs have executed a memory barrier.
+The rcutree implementation of RCU provides debugfs trace output that
+summarizes counters and state.  This information is useful for debugging
+RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats.
 
 
 Hierarchical RCU debugfs Files and Formats
@@ -210,9 +35,10 @@ rcu_bh:
   6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
   7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
-The first section lists the rcu_data structures for rcu, the second for
-rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
-The fields are as follows:
+The first section lists the rcu_data structures for rcu_sched, the second
+for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
+additional section for rcu_preempt.  Each section has one line per CPU,
+or eight for this 8-CPU system.  The fields are as follows:
 
 o	The number at the beginning of each line is the CPU number.
 	CPUs numbers followed by an exclamation mark are offline,
@@ -223,9 +49,9 @@ o	The number at the beginning of each line is the CPU number.
 
 o	"c" is the count of grace periods that this CPU believes have
 	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu" above, which has slept
-	through the past 25 RCU grace periods.	It is not unusual to
-	see CPUs lagging by thousands of grace periods.
+	behind, for example, CPU 4 under "rcu_sched" above, which has
+	slept through the past 25 RCU grace periods.  It is not unusual
+	to see CPUs lagging by thousands of grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
 	started.  Again, CPUs in dynticks idle mode may lag behind.
@@ -308,8 +134,10 @@ The output of "cat rcu/rcugp" looks as follows:
 rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
-Again, this output is for both "rcu" and "rcu_bh".  The fields are
-taken from the rcu_state structure, and are as follows:
+Again, this output is for both "rcu_sched" and "rcu_bh".  Note that
+kernels built with CONFIG_TREE_PREEMPT_RCU will have an additional
+"rcu_preempt" line.  The fields are taken from the rcu_state structure,
+and are as follows:
 
 o	"completed" is the number of grace periods that have completed.
 	It is comparable to the "c" field from rcu/rcudata in that a
@@ -324,23 +152,24 @@ o	"gpnum" is the number of grace periods that have started.  It is
 	If these two fields are equal (as they are for "rcu_bh" above),
 	then there is no grace period in progress, in other words, RCU
 	is idle.  On the other hand, if the two fields differ (as they
-	do for "rcu" above), then an RCU grace period is in progress.
+	do for "rcu_sched" above), then an RCU grace period is in progress.
 
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 0:127 ^0    
-3/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-3/3f 0:5 ^0    2/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3    
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+1/1 .>. 0:127 ^0    
+3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 0:127 ^0    
-0/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-0/3f 0:5 ^0    0/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+0/1 .>. 0:127 ^0    
+0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
 
-This is once again split into "rcu" and "rcu_bh" portions.  The fields are
-as follows:
+This is once again split into "rcu_sched" and "rcu_bh" portions,
+and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"c" is exactly the same as "completed" under rcu/rcugp.
 
@@ -372,6 +201,11 @@ o	"fqlh" is the number of calls to force_quiescent_state() that
 	exited immediately (without even being counted in nfqs above)
 	due to contention on ->fqslock.
 
+o	"oqlen" is the number of callbacks on the "orphan" callback
+	list.  RCU callbacks are placed on this list by CPUs going
+	offline, and are "adopted" either by the CPU helping the outgoing
+	CPU or by the next rcu_barrier*() call, whichever comes first.
+
 o	Each element of the form "1/1 0:127 ^0" represents one struct
 	rcu_node.  Each line represents one level of the hierarchy, from
 	root to leaves.  It is best to think of the rcu_data structures
@@ -379,7 +213,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 	might be either one, two, or three levels of rcu_node structures,
 	depending on the relationship between CONFIG_RCU_FANOUT and
 	CONFIG_NR_CPUS.
-	
+
 	o	The numbers separated by the "/" are the qsmask followed
 		by the qsmaskinit.  The qsmask will have one bit
 		set for each entity in the next lower level that
@@ -389,10 +223,19 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		The value of qsmaskinit is assigned to that of qsmask
 		at the beginning of each grace period.
 
-		For example, for "rcu", the qsmask of the first entry
-		of the lowest level is 0x14, meaning that we are still
-		waiting for CPUs 2 and 4 to check in for the current
-		grace period.
+		For example, for "rcu_sched", the qsmask of the first
+		entry of the lowest level is 0x14, meaning that we
+		are still waiting for CPUs 2 and 4 to check in for the
+		current grace period.
+
+	o	The characters separated by the ">" indicate the state
+		of the blocked-tasks lists.  A "T" preceding the ">"
+		indicates that at least one task blocked in an RCU
+		read-side critical section blocks the current grace
+		period, while a "." preceding the ">" indicates otherwise.
+		The character following the ">" indicates similarly for
+		the next grace period.  A "T" should appear in this
+		field only for rcu-preempt.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -431,8 +274,9 @@ rcu_bh:
   6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
   7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
+As always, this is once again split into "rcu_sched" and "rcu_bh"
+portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"np" is the number of times that __rcu_pending() has been invoked
 	for the corresponding flavor of RCU.

Documentation/RCU/whatisRCU.txt

@@ -830,7 +830,7 @@ sched:	Critical sections	Grace period		Barrier
 SRCU:	Critical sections	Grace period		Barrier
 
 	srcu_read_lock		synchronize_srcu	N/A
-	srcu_read_unlock
+	srcu_read_unlock	synchronize_srcu_expedited
 
 SRCU:	Initialization/cleanup
 	init_srcu_struct

Documentation/dontdiff

@@ -65,6 +65,7 @@ aicdb.h*
 asm-offsets.h
 asm_offsets.h
 autoconf.h*
+av_permissions.h
 bbootsect
 bin2c
 binkernel.spec
@@ -95,12 +96,14 @@ docproc
 elf2ecoff
 elfconfig.h*
 fixdep
+flask.h
 fore200e_mkfirm
 fore200e_pca_fw.c*
 gconf
 gen-devlist
 gen_crc32table
 gen_init_cpio
+genheaders
 genksyms
 *_gray256.c
 ihex2fw

Documentation/feature-removal-schedule.txt

@@ -6,6 +6,21 @@ be removed from this file.
 
 ---------------------------
 
+What:	USER_SCHED
+When:	2.6.34
+
+Why:	USER_SCHED was implemented as a proof of concept for group scheduling.
+	The effect of USER_SCHED can already be achieved from userspace with
+	the help of libcgroup. The removal of USER_SCHED will also simplify
+	the scheduler code with the removal of one major ifdef. There are also
+	issues USER_SCHED has with USER_NS. A decision was taken not to fix
+	those and instead remove USER_SCHED. Also new group scheduling
+	features will not be implemented for USER_SCHED.
+
+Who:	Dhaval Giani <dhaval@linux.vnet.ibm.com>
+
+---------------------------
+
 What:	PRISM54
 When:	2.6.34
 

Documentation/filesystems/proc.txt

@@ -1072,7 +1072,8 @@ second).  The meanings of the columns are as follows, from left to right:
 - irq: servicing interrupts
 - softirq: servicing softirqs
 - steal: involuntary wait
-- guest: running a guest
+- guest: running a normal guest
+- guest_nice: running a niced guest
 
 The "intr" line gives counts of interrupts  serviced since boot time, for each
 of the  possible system interrupts.   The first  column  is the  total of  all

Documentation/kernel-parameters.txt

@@ -85,7 +85,6 @@ parameter is applicable:
 	PPT	Parallel port support is enabled.
 	PS2	Appropriate PS/2 support is enabled.
 	RAM	RAM disk support is enabled.
-	ROOTPLUG The example Root Plug LSM is enabled.
 	S390	S390 architecture is enabled.
 	SCSI	Appropriate SCSI support is enabled.
 			A lot of drivers has their options described inside of
@@ -345,6 +344,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
 
+	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
+			Limit apic dumping. The parameter defines the maximal
+			number of local apics being dumped. Also it is possible
+			to set it to "all" by meaning -- no limit here.
+			Format: { 1 (default) | 2 | ... | all }.
+			The parameter valid if only apic=debug or
+			apic=verbose is specified.
+			Example: apic=debug show_lapic=all
+
 	apm=		[APM] Advanced Power Management
 			See header of arch/x86/kernel/apm_32.c.
 
@@ -779,6 +787,13 @@ and is between 256 and 4096 characters. It is defined in the file
 			by the set_ftrace_notrace file in the debugfs
 			tracing directory.
 
+	ftrace_graph_filter=[function-list]
+			[FTRACE] Limit the top level callers functions traced
+			by the function graph tracer at boot up.
+			function-list is a comma separated list of functions
+			that can be changed at run time by the
+			set_graph_function file in the debugfs tracing directory.
+
 	gamecon.map[2|3]=
 			[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
 			support via parallel port (up to 5 devices per port)
@@ -2032,8 +2047,15 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals
-			print-fatal-signals=1: print segfault info to
-			the kernel console.
+
+			If enabled, warn about various signal handling
+			related application anomalies: too many signals,
+			too many POSIX.1 timers, fatal signals causing a
+			coredump - etc.
+
+			If you hit the warning due to signal overflow,
+			you might want to try "ulimit -i unlimited".
+
 			default: off.
 
 	printk.time=	Show timing data prefixed to each printk message line
@@ -2164,15 +2186,6 @@ and is between 256 and 4096 characters. It is defined in the file
 			Useful for devices that are detected asynchronously
 			(e.g. USB and MMC devices).
 
-	root_plug.vendor_id=
-			[ROOTPLUG] Override the default vendor ID
-
-	root_plug.product_id=
-			[ROOTPLUG] Override the default product ID
-
-	root_plug.debug=
-			[ROOTPLUG] Enable debugging output
-
 	rw		[KNL] Mount root device read-write on boot
 
 	S		[KNL] Run init in single mode
@@ -2182,6 +2195,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	sbni=		[NET] Granch SBNI12 leased line adapter
 
+	sched_debug	[KNL] Enables verbose scheduler debug messages.
+
 	sc1200wdt=	[HW,WDT] SC1200 WDT (watchdog) driver
 			Format: <io>[,<timeout>[,<isapnp>]]
 

Documentation/pcmcia/driver-changes.txt

@@ -1,5 +1,17 @@
 This file details changes in 2.6 which affect PCMCIA card driver authors:
 
+* no cs_error / CS_CHECK / CONFIG_PCMCIA_DEBUG (as of 2.6.33)
+   Instead of the cs_error() callback or the CS_CHECK() macro, please use
+   Linux-style checking of return values, and -- if necessary -- debug
+   messages using "dev_dbg()" or "pr_debug()".
+
+* New CIS tuple access (as of 2.6.33)
+   Instead of pcmcia_get_{first,next}_tuple(), pcmcia_get_tuple_data() and
+   pcmcia_parse_tuple(), a driver shall use "pcmcia_get_tuple()" if it is
+   only interested in one (raw) tuple, or "pcmcia_loop_tuple()" if it is
+   interested in all tuples of one type. To decode the MAC from CISTPL_FUNCE,
+   a new helper "pcmcia_get_mac_from_cis()" was added.
+
 * New configuration loop helper (as of 2.6.28)
    By calling pcmcia_loop_config(), a driver can iterate over all available
    configuration options. During a driver's probe() phase, one doesn't need

Documentation/slow-work.txt

@@ -279,9 +279,9 @@ The slow-work thread pool has a number of configurables:
 VIEWING EXECUTING AND QUEUED ITEMS
 ==================================
 
-If CONFIG_SLOW_WORK_PROC is enabled, a proc file is made available:
+If CONFIG_SLOW_WORK_DEBUG is enabled, a debugfs file is made available:
 
-	/proc/slow_work_rq
+	/sys/kernel/debug/slow_work/runqueue
 
 through which the list of work items being executed and the queues of items to
 be executed may be viewed.  The owner of a work item is given the chance to

Documentation/trace/ftrace-design.txt

@@ -213,10 +213,19 @@ If you can't trace NMI functions, then skip this option.
 <details to be filled>
 
 
-HAVE_FTRACE_SYSCALLS
+HAVE_SYSCALL_TRACEPOINTS
 ---------------------
 
-<details to be filled>
+You need very few things to get the syscalls tracing in an arch.
+
+- Have a NR_syscalls variable in <asm/unistd.h> that provides the number
+  of syscalls supported by the arch.
+- Implement arch_syscall_addr() that resolves a syscall address from a
+  syscall number.
+- Support the TIF_SYSCALL_TRACEPOINT thread flags
+- Put the trace_sys_enter() and trace_sys_exit() tracepoints calls from ptrace
+  in the ptrace syscalls tracing path.
+- Tag this arch as HAVE_SYSCALL_TRACEPOINTS.
 
 
 HAVE_FTRACE_MCOUNT_RECORD

Documentation/trace/kprobetrace.txt

@@ -0,0 +1,149 @@
+                        Kprobe-based Event Tracing
+                        ==========================
+
+                 Documentation is written by Masami Hiramatsu
+
+
+Overview
+--------
+These events are similar to tracepoint based events. Instead of Tracepoint,
+this is based on kprobes (kprobe and kretprobe). So it can probe wherever
+kprobes can probe (this means, all functions body except for __kprobes
+functions). Unlike the Tracepoint based event, this can be added and removed
+dynamically, on the fly.
+
+To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y.
+
+Similar to the events tracer, this doesn't need to be activated via
+current_tracer. Instead of that, add probe points via
+/sys/kernel/debug/tracing/kprobe_events, and enable it via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/enabled.
+
+
+Synopsis of kprobe_events
+-------------------------
+  p[:[GRP/]EVENT] SYMBOL[+offs]|MEMADDR [FETCHARGS]	: Set a probe
+  r[:[GRP/]EVENT] SYMBOL[+0] [FETCHARGS]		: Set a return probe
+
+ GRP		: Group name. If omitted, use "kprobes" for it.
+ EVENT		: Event name. If omitted, the event name is generated
+		  based on SYMBOL+offs or MEMADDR.
+ SYMBOL[+offs]	: Symbol+offset where the probe is inserted.
+ MEMADDR	: Address where the probe is inserted.
+
+ FETCHARGS	: Arguments. Each probe can have up to 128 args.
+  %REG		: Fetch register REG
+  @ADDR		: Fetch memory at ADDR (ADDR should be in kernel)
+  @SYM[+|-offs]	: Fetch memory at SYM +|- offs (SYM should be a data symbol)
+  $stackN	: Fetch Nth entry of stack (N >= 0)
+  $stack	: Fetch stack address.
+  $argN		: Fetch function argument. (N >= 0)(*)
+  $retval	: Fetch return value.(**)
+  +|-offs(FETCHARG) : Fetch memory at FETCHARG +|- offs address.(***)
+  NAME=FETCHARG: Set NAME as the argument name of FETCHARG.
+
+  (*) aN may not correct on asmlinkaged functions and at the middle of
+      function body.
+  (**) only for return probe.
+  (***) this is useful for fetching a field of data structures.
+
+
+Per-Probe Event Filtering
+-------------------------
+ Per-probe event filtering feature allows you to set different filter on each
+probe and gives you what arguments will be shown in trace buffer. If an event
+name is specified right after 'p:' or 'r:' in kprobe_events, it adds an event
+under tracing/events/kprobes/<EVENT>, at the directory you can see 'id',
+'enabled', 'format' and 'filter'.
+
+enabled:
+  You can enable/disable the probe by writing 1 or 0 on it.
+
+format:
+  This shows the format of this probe event.
+
+filter:
+  You can write filtering rules of this event.
+
+id:
+  This shows the id of this probe event.
+
+
+Event Profiling
+---------------
+ You can check the total number of probe hits and probe miss-hits via
+/sys/kernel/debug/tracing/kprobe_profile.
+ The first column is event name, the second is the number of probe hits,
+the third is the number of probe miss-hits.
+
+
+Usage examples
+--------------
+To add a probe as a new event, write a new definition to kprobe_events
+as below.
+
+  echo p:myprobe do_sys_open dfd=$arg0 filename=$arg1 flags=$arg2 mode=$arg3 > /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kprobe on the top of do_sys_open() function with recording
+1st to 4th arguments as "myprobe" event. As this example shows, users can
+choose more familiar names for each arguments.
+
+  echo r:myretprobe do_sys_open $retval >> /sys/kernel/debug/tracing/kprobe_events
+
+ This sets a kretprobe on the return point of do_sys_open() function with
+recording return value as "myretprobe" event.
+ You can see the format of these events via
+/sys/kernel/debug/tracing/events/kprobes/<EVENT>/format.
+
+  cat /sys/kernel/debug/tracing/events/kprobes/myprobe/format
+name: myprobe
+ID: 75
+format:
+	field:unsigned short common_type;	offset:0;	size:2;
+	field:unsigned char common_flags;	offset:2;	size:1;
+	field:unsigned char common_preempt_count;	offset:3;	size:1;
+	field:int common_pid;	offset:4;	size:4;
+	field:int common_tgid;	offset:8;	size:4;
+
+	field: unsigned long ip;	offset:16;tsize:8;
+	field: int nargs;	offset:24;tsize:4;
+	field: unsigned long dfd;	offset:32;tsize:8;
+	field: unsigned long filename;	offset:40;tsize:8;
+	field: unsigned long flags;	offset:48;tsize:8;
+	field: unsigned long mode;	offset:56;tsize:8;
+
+print fmt: "(%lx) dfd=%lx filename=%lx flags=%lx mode=%lx", REC->ip, REC->dfd, REC->filename, REC->flags, REC->mode
+
+
+ You can see that the event has 4 arguments as in the expressions you specified.
+
+  echo > /sys/kernel/debug/tracing/kprobe_events
+
+ This clears all probe points.
+
+ Right after definition, each event is disabled by default. For tracing these
+events, you need to enable it.
+
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myprobe/enable
+  echo 1 > /sys/kernel/debug/tracing/events/kprobes/myretprobe/enable
+
+ And you can see the traced information via /sys/kernel/debug/tracing/trace.
+
+  cat /sys/kernel/debug/tracing/trace
+# tracer: nop
+#
+#           TASK-PID    CPU#    TIMESTAMP  FUNCTION
+#              | |       |          |         |
+           <...>-1447  [001] 1038282.286875: myprobe: (do_sys_open+0x0/0xd6) dfd=3 filename=7fffd1ec4440 flags=8000 mode=0
+           <...>-1447  [001] 1038282.286878: myretprobe: (sys_openat+0xc/0xe <- do_sys_open) $retval=fffffffffffffffe
+           <...>-1447  [001] 1038282.286885: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=40413c flags=8000 mode=1b6
+           <...>-1447  [001] 1038282.286915: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+           <...>-1447  [001] 1038282.286969: myprobe: (do_sys_open+0x0/0xd6) dfd=ffffff9c filename=4041c6 flags=98800 mode=10
+           <...>-1447  [001] 1038282.286976: myretprobe: (sys_open+0x1b/0x1d <- do_sys_open) $retval=3
+
+
+ Each line shows when the kernel hits an event, and <- SYMBOL means kernel
+returns from SYMBOL(e.g. "sys_open+0x1b/0x1d <- do_sys_open" means kernel
+returns from do_sys_open to sys_open+0x1b).
+
+

MAINTAINERS

@@ -3045,11 +3045,8 @@ S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD
-M:	Sam Ravnborg <sam@ravnborg.org>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	Documentation/kbuild/
 F:	Makefile
 F:	scripts/Makefile.*

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc8
+EXTRAVERSION =
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -379,6 +379,7 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exc
 PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
+	$(Q)rm -f .tmp_quiet_recordmcount
 
 # To avoid any implicit rule to kick in, define an empty command.
 scripts/basic/%: scripts_basic ;

arch/Kconfig

@@ -126,4 +126,11 @@ config HAVE_DMA_API_DEBUG
 config HAVE_DEFAULT_NO_SPIN_MUTEXES
 	bool
 
+config HAVE_HW_BREAKPOINT
+	bool
+	depends on HAVE_PERF_EVENTS
+	select ANON_INODES
+	select PERF_EVENTS
+
+
 source "kernel/gcov/Kconfig"

arch/alpha/include/asm/thread_info.h

@@ -61,21 +61,24 @@ register struct thread_info *__current_thread_info __asm__("$8");
 /*
  * Thread information flags:
  * - these are process state flags and used from assembly
- * - pending work-to-be-done flags come first to fit in and immediate operand.
+ * - pending work-to-be-done flags come first and must be assigned to be
+ *   within bits 0 to 7 to fit in and immediate operand.
+ * - ALPHA_UAC_SHIFT below must be kept consistent with the unaligned
+ *   control flags.
  *
  * TIF_SYSCALL_TRACE is known to be 0 via blbs.
  */
 #define TIF_SYSCALL_TRACE	0	/* syscall trace active */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_POLLING_NRFLAG	3	/* poll_idle is polling NEED_RESCHED */
-#define TIF_DIE_IF_KERNEL	4	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		5	/* see sysinfo.h */
-#define TIF_UAC_NOFIX		6
-#define TIF_UAC_SIGBUS		7
-#define TIF_MEMDIE		8
-#define TIF_RESTORE_SIGMASK	9	/* restore signal mask in do_signal */
-#define TIF_NOTIFY_RESUME	10	/* callback before returning to user */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
+#define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
+#define TIF_UAC_NOPRINT		10	/* see sysinfo.h */
+#define TIF_UAC_NOFIX		11
+#define TIF_UAC_SIGBUS		12
+#define TIF_MEMDIE		13
+#define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 #define TIF_FREEZE		16	/* is freezing for suspend */
 
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -94,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
 				 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT		6
+#define ALPHA_UAC_SHIFT		10
 #define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
 				 1 << TIF_UAC_SIGBUS)
 

arch/alpha/kernel/core_marvel.c

@@ -1103,6 +1103,8 @@ marvel_agp_info(void)
 	 * Allocate the info structure.
 	 */
 	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
 
 	/*
 	 * Fill it in.

arch/alpha/kernel/core_titan.c

@@ -757,6 +757,8 @@ titan_agp_info(void)
 	 * Allocate the info structure.
 	 */
 	agp = kmalloc(sizeof(*agp), GFP_KERNEL);
+	if (!agp)
+		return NULL;
 
 	/*
 	 * Fill it in.

arch/alpha/kernel/irq.c

@@ -92,7 +92,7 @@ show_interrupts(struct seq_file *p, void *v)
 		for_each_online_cpu(j)
 			seq_printf(p, "%10u ", kstat_irqs_cpu(irq, j));
 #endif
-		seq_printf(p, " %14s", irq_desc[irq].chip->typename);
+		seq_printf(p, " %14s", irq_desc[irq].chip->name);
 		seq_printf(p, "  %c%s",
 			(action->flags & IRQF_DISABLED)?'+':' ',
 			action->name);

arch/alpha/kernel/irq_alpha.c

@@ -228,7 +228,7 @@ struct irqaction timer_irqaction = {
 };
 
 static struct irq_chip rtc_irq_type = {
-	.typename	= "RTC",
+	.name		= "RTC",
 	.startup	= rtc_startup,
 	.shutdown	= rtc_enable_disable,
 	.enable		= rtc_enable_disable,

arch/alpha/kernel/irq_i8259.c

@@ -84,7 +84,7 @@ i8259a_end_irq(unsigned int irq)
 }
 
 struct irq_chip i8259a_irq_type = {
-	.typename	= "XT-PIC",
+	.name		= "XT-PIC",
 	.startup	= i8259a_startup_irq,
 	.shutdown	= i8259a_disable_irq,
 	.enable		= i8259a_enable_irq,

arch/alpha/kernel/irq_pyxis.c

@@ -71,7 +71,7 @@ pyxis_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip pyxis_irq_type = {
-	.typename	= "PYXIS",
+	.name		= "PYXIS",
 	.startup	= pyxis_startup_irq,
 	.shutdown	= pyxis_disable_irq,
 	.enable		= pyxis_enable_irq,

arch/alpha/kernel/irq_srm.c

@@ -49,7 +49,7 @@ srm_end_irq(unsigned int irq)
 
 /* Handle interrupts from the SRM, assuming no additional weirdness.  */
 static struct irq_chip srm_irq_type = {
-	.typename	= "SRM",
+	.name		= "SRM",
 	.startup	= srm_startup_irq,
 	.shutdown	= srm_disable_irq,
 	.enable		= srm_enable_irq,

arch/alpha/kernel/sys_alcor.c

@@ -90,7 +90,7 @@ alcor_end_irq(unsigned int irq)
 }
 
 static struct irq_chip alcor_irq_type = {
-	.typename	= "ALCOR",
+	.name		= "ALCOR",
 	.startup	= alcor_startup_irq,
 	.shutdown	= alcor_disable_irq,
 	.enable		= alcor_enable_irq,

arch/alpha/kernel/sys_cabriolet.c

@@ -72,7 +72,7 @@ cabriolet_end_irq(unsigned int irq)
 }
 
 static struct irq_chip cabriolet_irq_type = {
-	.typename	= "CABRIOLET",
+	.name		= "CABRIOLET",
 	.startup	= cabriolet_startup_irq,
 	.shutdown	= cabriolet_disable_irq,
 	.enable		= cabriolet_enable_irq,

arch/alpha/kernel/sys_dp264.c

@@ -199,7 +199,7 @@ clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 }
 
 static struct irq_chip dp264_irq_type = {
-	.typename	= "DP264",
+	.name		= "DP264",
 	.startup	= dp264_startup_irq,
 	.shutdown	= dp264_disable_irq,
 	.enable		= dp264_enable_irq,
@@ -210,7 +210,7 @@ static struct irq_chip dp264_irq_type = {
 };
 
 static struct irq_chip clipper_irq_type = {
-	.typename	= "CLIPPER",
+	.name		= "CLIPPER",
 	.startup	= clipper_startup_irq,
 	.shutdown	= clipper_disable_irq,
 	.enable		= clipper_enable_irq,

arch/alpha/kernel/sys_eb64p.c

@@ -70,7 +70,7 @@ eb64p_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eb64p_irq_type = {
-	.typename	= "EB64P",
+	.name		= "EB64P",
 	.startup	= eb64p_startup_irq,
 	.shutdown	= eb64p_disable_irq,
 	.enable		= eb64p_enable_irq,

arch/alpha/kernel/sys_eiger.c

@@ -81,7 +81,7 @@ eiger_end_irq(unsigned int irq)
 }
 
 static struct irq_chip eiger_irq_type = {
-	.typename	= "EIGER",
+	.name		= "EIGER",
 	.startup	= eiger_startup_irq,
 	.shutdown	= eiger_disable_irq,
 	.enable		= eiger_enable_irq,

arch/alpha/kernel/sys_jensen.c

@@ -119,7 +119,7 @@ jensen_local_end(unsigned int irq)
 }
 
 static struct irq_chip jensen_local_irq_type = {
-	.typename	= "LOCAL",
+	.name		= "LOCAL",
 	.startup	= jensen_local_startup,
 	.shutdown	= jensen_local_shutdown,
 	.enable		= jensen_local_enable,

arch/alpha/kernel/sys_marvel.c

@@ -170,7 +170,7 @@ marvel_irq_noop_return(unsigned int irq)
 }
 
 static struct irq_chip marvel_legacy_irq_type = {
-	.typename	= "LEGACY",
+	.name		= "LEGACY",
 	.startup	= marvel_irq_noop_return,
 	.shutdown	= marvel_irq_noop,
 	.enable		= marvel_irq_noop,
@@ -180,7 +180,7 @@ static struct irq_chip marvel_legacy_irq_type = {
 };
 
 static struct irq_chip io7_lsi_irq_type = {
-	.typename	= "LSI",
+	.name		= "LSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
 	.enable		= io7_enable_irq,
@@ -190,7 +190,7 @@ static struct irq_chip io7_lsi_irq_type = {
 };
 
 static struct irq_chip io7_msi_irq_type = {
-	.typename	= "MSI",
+	.name		= "MSI",
 	.startup	= io7_startup_irq,
 	.shutdown	= io7_disable_irq,
 	.enable		= io7_enable_irq,

arch/alpha/kernel/sys_mikasa.c

@@ -69,7 +69,7 @@ mikasa_end_irq(unsigned int irq)
 }
 
 static struct irq_chip mikasa_irq_type = {
-	.typename	= "MIKASA",
+	.name		= "MIKASA",
 	.startup	= mikasa_startup_irq,
 	.shutdown	= mikasa_disable_irq,
 	.enable		= mikasa_enable_irq,

arch/alpha/kernel/sys_noritake.c

@@ -74,7 +74,7 @@ noritake_end_irq(unsigned int irq)
 }
 
 static struct irq_chip noritake_irq_type = {
-	.typename	= "NORITAKE",
+	.name		= "NORITAKE",
 	.startup	= noritake_startup_irq,
 	.shutdown	= noritake_disable_irq,
 	.enable		= noritake_enable_irq,

arch/alpha/kernel/sys_rawhide.c

@@ -136,7 +136,7 @@ rawhide_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rawhide_irq_type = {
-	.typename	= "RAWHIDE",
+	.name		= "RAWHIDE",
 	.startup	= rawhide_startup_irq,
 	.shutdown	= rawhide_disable_irq,
 	.enable		= rawhide_enable_irq,

arch/alpha/kernel/sys_ruffian.c

@@ -66,7 +66,7 @@ ruffian_init_irq(void)
 	common_init_isa_dma();
 }
 
-#define RUFFIAN_LATCH	((PIT_TICK_RATE + HZ / 2) / HZ)
+#define RUFFIAN_LATCH	DIV_ROUND_CLOSEST(PIT_TICK_RATE, HZ)
 
 static void __init
 ruffian_init_rtc(void)

arch/alpha/kernel/sys_rx164.c

@@ -73,7 +73,7 @@ rx164_end_irq(unsigned int irq)
 }
 
 static struct irq_chip rx164_irq_type = {
-	.typename	= "RX164",
+	.name		= "RX164",
 	.startup	= rx164_startup_irq,
 	.shutdown	= rx164_disable_irq,
 	.enable		= rx164_enable_irq,

arch/alpha/kernel/sys_sable.c

@@ -502,7 +502,7 @@ sable_lynx_mask_and_ack_irq(unsigned int irq)
 }
 
 static struct irq_chip sable_lynx_irq_type = {
-	.typename	= "SABLE/LYNX",
+	.name		= "SABLE/LYNX",
 	.startup	= sable_lynx_startup_irq,
 	.shutdown	= sable_lynx_disable_irq,
 	.enable		= sable_lynx_enable_irq,

arch/alpha/kernel/sys_takara.c

@@ -75,7 +75,7 @@ takara_end_irq(unsigned int irq)
 }
 
 static struct irq_chip takara_irq_type = {
-	.typename	= "TAKARA",
+	.name		= "TAKARA",
 	.startup	= takara_startup_irq,
 	.shutdown	= takara_disable_irq,
 	.enable		= takara_enable_irq,

arch/alpha/kernel/sys_titan.c

@@ -195,7 +195,7 @@ init_titan_irqs(struct irq_chip * ops, int imin, int imax)
 }
 
 static struct irq_chip titan_irq_type = {
-       .typename       = "TITAN",
+       .name	       = "TITAN",
        .startup        = titan_startup_irq,
        .shutdown       = titan_disable_irq,
        .enable         = titan_enable_irq,

arch/alpha/kernel/sys_wildfire.c

@@ -158,7 +158,7 @@ wildfire_end_irq(unsigned int irq)
 }
 
 static struct irq_chip wildfire_irq_type = {
-	.typename	= "WILDFIRE",
+	.name		= "WILDFIRE",
 	.startup	= wildfire_startup_irq,
 	.shutdown	= wildfire_disable_irq,
 	.enable		= wildfire_enable_irq,

arch/arm/configs/h3600_defconfig

@@ -1,86 +1,189 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Thu Jun  9 01:59:03 2005
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 24 00:09:30 2009
 #
 CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # SA11x0 Implementations
@@ -106,27 +209,31 @@ CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -138,11 +245,41 @@ CONFIG_PCMCIA_SA1100=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -151,22 +288,26 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_SA1100=y
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -183,6 +324,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -191,8 +334,120 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_SA1100_FIR=m
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -201,15 +456,17 @@ CONFIG_PM=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
@@ -218,15 +475,20 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -249,6 +511,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -265,7 +528,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -273,7 +536,6 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -282,26 +544,21 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -309,212 +566,58 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 # CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
@@ -525,10 +628,6 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -537,20 +636,23 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -560,7 +662,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,47 +669,42 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
@@ -618,71 +714,125 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
-# IPMI
+# PCMCIA character devices
 #
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Watchdog Cards
+# PPS support
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Ftape, the floppy tape device driver
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DRM is not set
 
 #
-# PCMCIA character devices
+# I2C GPIO expanders:
 #
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# PCI GPIO expanders:
 #
 
 #
-# I2C support
+# SPI GPIO expanders:
 #
-# CONFIG_I2C is not set
 
 #
-# Misc devices
+# AC97 GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+CONFIG_HTC_EGPIO=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_SA1100=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,65 +841,54 @@ CONFIG_FB_SA1100=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# USB Gadget Support
+# TI VLYNQ
 #
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -771,16 +910,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -788,34 +924,37 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -831,10 +970,6 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -875,20 +1010,34 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -896,21 +1045,120 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y

arch/arm/mach-sa1100/Kconfig

@@ -53,23 +53,23 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
+	select HTC_EGPIO
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"

arch/arm/mach-sa1100/Makefile

@@ -25,8 +25,8 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
-obj-$(CONFIG_SA1100_H3100)		+= h3600.o
-obj-$(CONFIG_SA1100_H3600)		+= h3600.o
+obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
+obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o

arch/arm/mach-sa1100/assabet.c

@@ -249,10 +249,10 @@ static void __init assabet_init(void)
 #endif
 	}
 
-	sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
-			      ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_set_irda_data(&assabet_irda_data);
-	sa11x0_set_mcp_data(&assabet_mcp_data);
+	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
+			    ARRAY_SIZE(assabet_flash_resources));
+	sa11x0_register_irda(&assabet_irda_data);
+	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
 /*

arch/arm/mach-sa1100/badge4.c

@@ -212,7 +212,7 @@ static int __init badge4_init(void)
 	/* maybe turn on 5v0 from the start */
 	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
 
-	sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
 
 	return 0;
 }

arch/arm/mach-sa1100/cerf.c

@@ -129,8 +129,8 @@ static struct mcp_plat_data cerf_mcp_data = {
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_set_mcp_data(&cerf_mcp_data);
+	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")

arch/arm/mach-sa1100/collie.c

@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -56,6 +57,7 @@ static struct resource collie_scoop_resources[] = {
 static struct scoop_config collie_scoop_setup = {
 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
 	.io_out		= COLLIE_SCOOP_IO_OUT,
+	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device colliescoop_device = {
@@ -85,6 +87,70 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+	.init			= collie_power_init,
+	.is_ac_online		= collie_power_ac_online,
+	.exit			= collie_power_exit,
+	.supplied_to		= collie_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device collie_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &collie_power_data,
+	.resource		= collie_power_resource,
+	.num_resources		= ARRAY_SIZE(collie_power_resource),
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -178,6 +244,7 @@ struct platform_device collie_locomo_device = {
 static struct platform_device *devices[] __initdata = {
 	&collie_locomo_device,
 	&colliescoop_device,
+	&collie_power_device,
 };
 
 static struct mtd_partition collie_partitions[] = {
@@ -248,22 +315,24 @@ static void __init collie_init(void)
 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
-		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
-		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 
 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 
-	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
-		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
 
-	PGSR = COLLIE_GPIO_nREMOCON_ON;
+	PGSR = _COLLIE_GPIO_nREMOCON_ON;
 
 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
 
 	PCFR = PCFR_OPDE;
 
+	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
@@ -272,9 +341,9 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
-	sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
-			      ARRAY_SIZE(collie_flash_resources));
-	sa11x0_set_mcp_data(&collie_mcp_data);
+	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+			    ARRAY_SIZE(collie_flash_resources));
+	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
 }

arch/arm/mach-sa1100/generic.c

@@ -162,6 +162,17 @@ static void sa1100_power_off(void)
 	PMCR = PMCR_SF;
 }
 
+static void sa11x0_register_device(struct platform_device *dev, void *data)
+{
+	int err;
+	dev->dev.platform_data = data;
+	err = platform_device_register(dev);
+	if (err)
+		printk(KERN_ERR "Unable to register device %s: %d\n",
+			dev->name, err);
+}
+
+
 static struct resource sa11x0udc_resources[] = {
 	[0] = {
 		.start	= 0x80000000,
@@ -234,9 +245,9 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
-void sa11x0_set_mcp_data(struct mcp_plat_data *data)
+void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
-	sa11x0mcp_device.dev.platform_data = data;
+	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
@@ -293,13 +304,13 @@ static struct platform_device sa11x0mtd_device = {
 	.id		= -1,
 };
 
-void sa11x0_set_flash_data(struct flash_platform_data *flash,
-			   struct resource *res, int nr)
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr)
 {
 	flash->name = "sa1100";
-	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
+	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
 static struct resource sa11x0ir_resources[] = {
@@ -329,9 +340,9 @@ static struct platform_device sa11x0ir_device = {
 	.resource	= sa11x0ir_resources,
 };
 
-void sa11x0_set_irda_data(struct irda_platform_data *irda)
+void sa11x0_register_irda(struct irda_platform_data *irda)
 {
-	sa11x0ir_device.dev.platform_data = irda;
+	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
 static struct platform_device sa11x0rtc_device = {
@@ -343,21 +354,15 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
-	&sa11x0mcp_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
-	&sa11x0mtd_device,
 	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
 {
 	pm_power_off = sa1100_power_off;
-
-	if (sa11x0ir_device.dev.platform_data)
-		platform_device_register(&sa11x0ir_device);
-
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 

arch/arm/mach-sa1100/generic.h

@@ -32,14 +32,11 @@ extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
 struct flash_platform_data;
 struct resource;
 
-extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
-				  struct resource *res, int nr);
-
-struct sa11x0_ssp_plat_ops;
-extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr);
 
 struct irda_platform_data;
-void sa11x0_set_irda_data(struct irda_platform_data *irda);
+void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
-void sa11x0_set_mcp_data(struct mcp_plat_data *data);
+void sa11x0_register_mcp(struct mcp_plat_data *data);

arch/arm/mach-sa1100/h3100.c

@@ -0,0 +1,95 @@
+/*
+ * Support for Compaq iPAQ H3100 handheld computer
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irda.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+/*
+ * helper for sa1100fb
+ */
+static void h3100_lcd_power(int enable)
+{
+	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+		gpio_free(H3XXX_EGPIO_LCD_ON);
+	} else {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+	}
+}
+
+
+static void __init h3100_map_io(void)
+{
+	h3xxx_map_io();
+
+	sa1100fb_lcd_power = h3100_lcd_power;
+
+	/* Older bootldrs put GPIO2-9 in alternate mode on the
+	   assumption that they are used for video */
+	GAFR &= ~0x000001fb;
+}
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3100
+ */
+static int h3100_irda_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(H3100_GPIO_IR_ON, state);
+	return 0;
+}
+
+static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
+{
+	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static struct irda_platform_data h3100_irda_data = {
+	.set_power	= h3100_irda_set_power,
+	.set_speed	= h3100_irda_set_speed,
+};
+
+static struct gpio_default_state h3100_default_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
+};
+
+static void __init h3100_mach_init(void)
+{
+	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3100_irda_data);
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3100_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= h3100_mach_init,
+MACHINE_END
+

arch/arm/mach-sa1100/h3600.c

@@ -1,421 +1,127 @@
 /*
- * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ * Support for Compaq iPAQ H3600 handheld computer
  *
- * Copyright 2000,1 Compaq Computer Corporation.
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
  *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *				   and abstracted EGPIO interface.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  */
-#include <linux/module.h>
+
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
+#include <linux/gpio.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
 
-#include <mach/h3600.h>
-#include <mach/h3600_gpio.h>
+#include <mach/h3xxx.h>
 
 #include "generic.h"
 
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		.name		= "H3XXX boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "H3XXX rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00040000,
-	}
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= h3xxx_set_vpp,
-	.parts		= h3xxx_partitions,
-	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
 /*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
-
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-};
-
-static void h3xxx_mach_init(void)
-{
-	sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-	sa11x0_set_irda_data(&h3600_irda_data);
-}
-
-/*
- * low-level UART features
+ * helper for sa1100fb
  */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+static void h3600_lcd_power(int enable)
 {
-	if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			GPCR = GPIO_H3600_COM_RTS;
-		else
-			GPSR = GPIO_H3600_COM_RTS;
+	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+		goto err1;
 	}
-}
-
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		int gplr = GPLR;
-		/* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
-		if (gplr & GPIO_H3600_COM_DCD)
-			ret &= ~TIOCM_CD;
-		if (gplr & GPIO_H3600_COM_CTS)
-			ret &= ~TIOCM_CTS;
+	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
+		goto err2;
+	}
+	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
+		goto err3;
+	}
+	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
+		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
+		goto err4;
 	}
 
-	return ret;
-}
+	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
 
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
-		assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
-	}
+	gpio_free(H3600_EGPIO_LVDD_ON);
+err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3:	gpio_free(H3600_EGPIO_LCD_PCI);
+err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
+err1:	return;
 }
 
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
+static void __init h3600_map_io(void)
 {
-	int err = -EINVAL;
+	h3xxx_map_io();
 
-	if (port->mapbase == _Ser3UTCR0) {
-		if (enable)
-			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
-		else
-			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-		err = 0;
-	}
-	return err;
+	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
-static struct sa1100_port_fns h3600_port_fns __initdata = {
-	.set_mctrl	= h3600_uart_set_mctrl,
-	.get_mctrl	= h3600_uart_get_mctrl,
-	.pm		= h3600_uart_pm,
-	.set_wake	= h3600_uart_set_wake,
-};
-
 /*
- * helper for sa1100fb
+ * This turns the IRDA power on or off on the Compaq H3600
  */
-static void h3xxx_lcd_power(int enable)
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
 {
-	assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+	gpio_set_value(H3600_EGPIO_IR_ON, state);
+	return 0;
 }
 
-static struct map_desc h3600_io_desc[] __initdata = {
-  	{	/* static memory bank 2  CS#2 */
-		.virtual	=  H3600_BANK_2_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
-		.length		= 0x02800000,
-		.type		= MT_DEVICE
-	}, {	/* static memory bank 4  CS#4 */
-		.virtual	=  H3600_BANK_4_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* EGPIO 0		CS#5 */
-		.virtual	=  H3600_EGPIO_VIRT,
-		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	}
-};
-
-/*
- * Common map_io initialization
- */
-
-static void __init h3xxx_map_io(void)
+static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	sa1100_map_io();
-	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
-	sa1100_register_uart_fns(&h3600_port_fns);
-	sa1100_register_uart(0, 3); /* Common serial port */
-//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
-	/* Ensure those pins are outputs and driving low  */
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	/* Configure suspend conditions */
-	PGSR = 0;
-	PWER = PWER_GPIO0 | PWER_RTC;
-	PCFR = PCFR_OPDE;
-	PSDR = 0;
-
-	sa1100fb_lcd_power = h3xxx_lcd_power;
+	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
-/************************* H3100 *************************/
-
-#ifdef CONFIG_SA1100_H3100
-
-#define H3100_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
+static int h3600_irda_startup(struct device *dev)
 {
-	unsigned int egpio = 0;
-	long	     gpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON;
-		gpio  |= GPIO_H3100_LCD_3V_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		gpio |= GPIO_H3100_AUD_PWR_ON
-			| GPIO_H3100_AUD_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		gpio |= GPIO_H3100_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		gpio |= GPIO_H3100_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		gpio |= GPIO_H3100_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+	if (err)
+		goto err1;
+	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+	if (err)
+		goto err2;
+	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+	if (err)
+		goto err2;
+	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+	if (err)
+		goto err3;
+	return 0;
 
-	if (egpio || gpio) {
-		local_irq_save(flags);
-		if (setp) {
-			h3100_egpio |= egpio;
-			GPSR = gpio;
-		} else {
-			h3100_egpio &= ~egpio;
-			GPCR = gpio;
-		}
-		H3100_EGPIO = h3100_egpio;
-		local_irq_restore(flags);
-	}
+err3:	gpio_free(H3600_EGPIO_IR_FSEL);
+err2:	gpio_free(H3600_EGPIO_IR_ON);
+err1:	return err;
 }
 
-#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
-			  | GPIO_H3100_GPIO3	  \
-			  | GPIO_H3100_QMUTE	  \
-			  | GPIO_H3100_LCD_3V_ON  \
-			  | GPIO_H3100_AUD_ON	  \
-			  | GPIO_H3100_AUD_PWR_ON \
-			  | GPIO_H3100_IR_ON	  \
-			  | GPIO_H3100_IR_FSEL)
-
-static void __init h3100_map_io(void)
+static void h3600_irda_shutdown(struct device *dev)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3100-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       H3100_DIRECT_EGPIO;
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~H3100_DIRECT_EGPIO;
-
-	H3100_EGPIO = h3100_egpio;
-	assign_h3600_egpio = h3100_control_egpio;
+	gpio_free(H3600_EGPIO_IR_ON);
+	gpio_free(H3600_EGPIO_IR_FSEL);
 }
 
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3100_map_io,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3100 */
-
-/************************* H3600 *************************/
-
-#ifdef CONFIG_SA1100_H3600
-
-#define H3600_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	unsigned int egpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON |
-			 EGPIO_H3600_LCD_PCI |
-			 EGPIO_H3600_LCD_5V_ON |
-			 EGPIO_H3600_LVDD_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		egpio |= EGPIO_H3600_AUD_AMP_ON |
-			 EGPIO_H3600_AUD_PWR_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		egpio |= EGPIO_H3600_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		egpio |= EGPIO_H3600_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		egpio |= EGPIO_H3600_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+static struct irda_platform_data h3600_irda_data = {
+	.set_power	= h3600_irda_set_power,
+	.set_speed	= h3600_irda_set_speed,
+	.startup	= h3600_irda_startup,
+	.shutdown	= h3600_irda_shutdown,
+};
 
-	if (egpio) {
-		local_irq_save(flags);
-		if (setp)
-			h3600_egpio |= egpio;
-		else
-			h3600_egpio &= ~egpio;
-		H3600_EGPIO = h3600_egpio;
-		local_irq_restore(flags);
-	}
-}
+static struct gpio_default_state h3600_default_gpio[] = {
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+};
 
-static void __init h3600_map_io(void)
+static void __init h3600_mach_init(void)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3600-specific values here */
-
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-
-	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	assign_h3600_egpio = h3600_control_egpio;
+	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -425,8 +131,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
+	.init_machine	= h3600_mach_init,
 MACHINE_END
 
-#endif /* CONFIG_SA1100_H3600 */
-

arch/arm/mach-sa1100/h3xxx.c

@@ -0,0 +1,313 @@
+/*
+ * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
+{
+	while (n--) {
+		const char *name = s->name;
+		int err;
+
+		if (!name)
+			name = "[init]";
+		err = gpio_request(s->gpio, name);
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to request: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (s->mode >= 0) {
+			err = gpio_direction_output(s->gpio, s->mode);
+		} else {
+			err = gpio_direction_input(s->gpio);
+		}
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (!s->name)
+			gpio_free(s->gpio);
+		s++;
+	}
+}
+
+
+/*
+ * H3xxx flash support
+ */
+static struct mtd_partition h3xxx_partitions[] = {
+	{
+		.name		= "H3XXX boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "H3XXX rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00040000,
+	}
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+	gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+	int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+	if (err) {
+		pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
+		return err;
+	}
+
+	err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+	if (err)
+		gpio_free(H3XXX_EGPIO_VPP_ON);
+
+	return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+	gpio_free(H3XXX_EGPIO_VPP_ON);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= h3xxx_set_vpp,
+	.init		= h3xxx_flash_init,
+	.exit		= h3xxx_flash_exit,
+	.parts		= h3xxx_partitions,
+	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+
+/*
+ * H3xxx uart support
+ */
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
+	}
+}
+
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
+{
+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		/*
+		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+		 */
+		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
+			ret &= ~TIOCM_CD;
+		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
+			ret &= ~TIOCM_CTS;
+	}
+
+	return ret;
+}
+
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+			gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+			gpio_free(H3XXX_EGPIO_RS232_ON);
+		} else {
+			pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
+				__func__);
+		}
+	}
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
+{
+	int err = -EINVAL;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		if (enable)
+			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+		else
+			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+		err = 0;
+	}
+	return err;
+}
+
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+	.set_mctrl	= h3xxx_uart_set_mctrl,
+	.get_mctrl	= h3xxx_uart_get_mctrl,
+	.pm		= h3xxx_uart_pm,
+	.set_wake	= h3xxx_uart_set_wake,
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start	= H3600_EGPIO_PHYS,
+		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start	= 0,
+		.gpio_base	= H3XXX_EGPIO_BASE,
+		.num_gpios	= 16,
+		.direction	= HTC_EGPIO_OUTPUT,
+		.initial_values	= 0x0080, /* H3XXX_EGPIO_RS232_ON */
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width	= 16,
+	.bus_width	= 16,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device h3xxx_egpio = {
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
+	.dev		= {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * GPIO keys
+ */
+
+static struct gpio_keys_button h3xxx_button_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= H3XXX_GPIO_PWR_BUTTON,
+		.desc		= "Power Button",
+		.active_low	= 1,
+		.type		= EV_KEY,
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_ENTER,
+		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
+		.active_low	= 1,
+		.desc		= "Action button",
+		.type		= EV_KEY,
+		.wakeup		= 0,
+	},
+};
+
+static struct gpio_keys_platform_data h3xxx_keys_data = {
+	.buttons  = h3xxx_button_table,
+	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
+};
+
+static struct platform_device h3xxx_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3xxx_keys_data,
+	},
+};
+
+static struct platform_device *h3xxx_devices[] = {
+	&h3xxx_egpio,
+	&h3xxx_keys,
+};
+
+void __init h3xxx_mach_init(void)
+{
+	sa1100_register_uart_fns(&h3xxx_port_fns);
+	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+/*
+ * Common map_io initialization
+ */
+
+void __init h3xxx_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+	sa1100_register_uart(0, 3); /* Common serial port */
+//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+	/* Ensure those pins are outputs and driving low  */
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+	/* Configure suspend conditions */
+	PGSR = 0;
+	PCFR = PCFR_OPDE;
+	PSDR = 0;
+
+	GPCR = 0x0fffffff;	/* All outputs are set low by default */
+	GPDR = 0;		/* Configure all GPIOs as input */
+}
+

arch/arm/mach-sa1100/hackkit.c

@@ -187,7 +187,7 @@ static struct resource hackkit_flash_resource = {
 
 static void __init hackkit_init(void)
 {
-	sa11x0_set_flash_data(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
 }
 
 /**********************************************************************

arch/arm/mach-sa1100/include/mach/collie.h

@@ -25,29 +25,39 @@
 #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+				COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
 
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib  */
 
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY		(0)
+#define COLLIE_GPIO_AC_IN		(1)
+#define COLLIE_GPIO_SDIO_INT		(11)
+#define COLLIE_GPIO_CF_IRQ		(14)
+#define COLLIE_GPIO_nREMOCON_INT	(15)
+#define COLLIE_GPIO_UCB1x00_RESET	(16)
+#define COLLIE_GPIO_nMIC_ON		(17)
+#define COLLIE_GPIO_nREMOCON_ON		(18)
+#define COLLIE_GPIO_CO			(20)
+#define COLLIE_GPIO_MCP_CLK		(21)
+#define COLLIE_GPIO_CF_CD		(22)
+#define COLLIE_GPIO_UCB1x00_IRQ		(23)
+#define COLLIE_GPIO_WAKEUP		(24)
+#define COLLIE_GPIO_GA_INT		(25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
 
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
 /* Interrupts */
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
@@ -70,19 +80,20 @@
 #define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
 
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+						| UCB_IO_6)
 
 #endif

arch/arm/mach-sa1100/include/mach/gpio.h

@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 #define gpio_cansleep	__gpio_cansleep
 
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+					(IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+					(irq - IRQ_GPIO11 + 11))
 
 #endif

arch/arm/mach-sa1100/include/mach/h3600.h

@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */

arch/arm/mach-sa1100/include/mach/h3600_gpio.h

@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON		(1 << 0)
-#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */

arch/arm/mach-sa1100/include/mach/h3xxx.h

@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON		0
+#define H3XXX_GPIO_PCMCIA_CD1		10
+#define H3XXX_GPIO_PCMCIA_IRQ1		11
+#define H3XXX_GPIO_PCMCIA_CD0		17
+#define H3XXX_GPIO_ACTION_BUTTON	18
+#define H3XXX_GPIO_SYS_CLK		19
+#define H3XXX_GPIO_PCMCIA_IRQ0		21
+#define H3XXX_GPIO_COM_DCD		23
+#define H3XXX_GPIO_OPTION		24
+#define H3XXX_GPIO_COM_CTS		25
+#define H3XXX_GPIO_COM_RTS		26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON		2
+#define H3100_GPIO_QMUTE		4
+#define H3100_GPIO_LCD_3V_ON		5
+#define H3100_GPIO_AUD_ON		6
+#define H3100_GPIO_AUD_PWR_ON		7
+#define H3100_GPIO_IR_ON		8
+#define H3100_GPIO_IR_FSEL		9
+
+#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1		13
+#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK		22
+#define H3600_GPIO_OPT_DET		27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+	int gpio;
+	int mode;
+	const char *name;
+};
+
+#define GPIO_MODE_IN	-1
+#define GPIO_MODE_OUT0	0
+#define GPIO_MODE_OUT1	1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */

arch/arm/mach-sa1100/include/mach/mcp.h

@@ -16,6 +16,7 @@ struct mcp_plat_data {
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
+	int gpio_base;
 };
 
 #endif

arch/arm/mach-sa1100/jornada720.c

@@ -354,7 +354,7 @@ static struct resource jornada720_flash_resource = {
 
 static void __init jornada720_mach_init(void)
 {
-	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+	sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")

arch/arm/mach-sa1100/lart.c

@@ -28,7 +28,7 @@ static struct mcp_plat_data lart_mcp_data = {
 
 static void __init lart_init(void)
 {
-	sa11x0_set_mcp_data(&lart_mcp_data);
+	sa11x0_register_mcp(&lart_mcp_data);
 }
 
 static struct map_desc lart_io_desc[] __initdata = {

arch/arm/mach-sa1100/pleb.c

@@ -109,7 +109,7 @@ static struct flash_platform_data pleb_flash_data = {
 
 static void __init pleb_init(void)
 {
-	sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
 			      ARRAY_SIZE(pleb_flash_resources));
 
 

arch/arm/mach-sa1100/shannon.c

@@ -59,8 +59,8 @@ static struct mcp_plat_data shannon_mcp_data = {
 
 static void __init shannon_init(void)
 {
-	sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_set_mcp_data(&shannon_mcp_data);
+	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
 static void __init shannon_map_io(void)

arch/arm/mach-sa1100/simpad.c

@@ -166,9 +166,9 @@ static void __init simpad_map_io(void)
 	PCFR = 0;
 	PSDR = 0;
 
-	sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
+	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_set_mcp_data(&simpad_mcp_data);
+	sa11x0_register_mcp(&simpad_mcp_data);
 }
 
 static void simpad_power_off(void)

arch/avr32/include/asm/bug.h

@@ -52,7 +52,7 @@
 #define BUG()								\
 	do {								\
 		_BUG_OR_WARN(0);					\
-		for (;;);						\
+		unreachable();						\
 	} while (0)
 
 #define WARN_ON(condition)							\

arch/ia64/include/asm/swiotlb.h

@@ -4,8 +4,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/swiotlb.h>
 
-extern int swiotlb_force;
-
 #ifdef CONFIG_SWIOTLB
 extern int swiotlb;
 extern void pci_swiotlb_init(void);

arch/ia64/kernel/pci-swiotlb.c

@@ -41,7 +41,7 @@ struct dma_map_ops swiotlb_dma_ops = {
 void __init swiotlb_dma_init(void)
 {
 	dma_ops = &swiotlb_dma_ops;
-	swiotlb_init();
+	swiotlb_init(1);
 }
 
 void __init pci_swiotlb_init(void)
@@ -51,7 +51,7 @@ void __init pci_swiotlb_init(void)
 		swiotlb = 1;
 		printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n");
 		machvec_init("dig");
-		swiotlb_init();
+		swiotlb_init(1);
 		dma_ops = &swiotlb_dma_ops;
 #else
 		panic("Unable to find Intel IOMMU");

arch/mips/Kconfig

@@ -358,7 +358,14 @@ config SGI_IP22
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
-	select SYS_HAS_EARLY_PRINTK
+	#
+	# Disable EARLY_PRINTK for now since it leads to overwritten prom
+	# memory during early boot on some machines.
+	#
+	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+	# for a more details discussion
+	#
+	# select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -410,7 +417,14 @@ config SGI_IP28
 	select SGI_HAS_ZILOG
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_R10000
-	select SYS_HAS_EARLY_PRINTK
+	#
+	# Disable EARLY_PRINTK for now since it leads to overwritten prom
+	# memory during early boot on some machines.
+	#
+	# See http://www.linux-mips.org/cgi-bin/mesg.cgi?a=linux-mips&i=20091119164009.GA15038%40deprecation.cyrius.com
+	# for a more details discussion
+	#
+	# select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
       help
@@ -1439,6 +1453,7 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
+	depends on !CPU_LOONGSON2
 	help
 	 This option select the standard 4kB Linux page size.  On some
 	 R3000-family processors this is the only available page size.  Using
@@ -1763,7 +1778,7 @@ config SYS_SUPPORTS_SMARTMIPS
 
 config ARCH_FLATMEM_ENABLE
 	def_bool y
-	depends on !NUMA
+	depends on !NUMA && !CPU_LOONGSON2
 
 config ARCH_DISCONTIGMEM_ENABLE
 	bool

arch/mips/include/asm/bug.h

@@ -11,9 +11,7 @@
 static inline void __noreturn BUG(void)
 {
 	__asm__ __volatile__("break %0" : : "i" (BRK_BUG));
-	/* Fool GCC into thinking the function doesn't return. */
-	while (1)
-		;
+	unreachable();
 }
 
 #define HAVE_ARCH_BUG

arch/mips/include/asm/mman.h

@@ -75,6 +75,7 @@
 
 #define MADV_MERGEABLE   12		/* KSM may merge identical pages */
 #define MADV_UNMERGEABLE 13		/* KSM may not merge identical pages */
+#define MADV_HWPOISON    100		/* poison a page for testing */
 
 /* compatibility flags */
 #define MAP_FILE	0

arch/mips/include/asm/system.h

@@ -12,6 +12,7 @@
 #ifndef _ASM_SYSTEM_H
 #define _ASM_SYSTEM_H
 
+#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/irqflags.h>
 
@@ -193,10 +194,6 @@ extern __u64 __xchg_u64_unsupported_on_32bit_kernels(volatile __u64 * m, __u64 v
 #define __xchg_u64 __xchg_u64_unsupported_on_32bit_kernels
 #endif
 
-/* This function doesn't exist, so you'll get a linker error
-   if something tries to do an invalid xchg().  */
-extern void __xchg_called_with_bad_pointer(void);
-
 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
 {
 	switch (size) {
@@ -205,11 +202,17 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz
 	case 8:
 		return __xchg_u64(ptr, x);
 	}
-	__xchg_called_with_bad_pointer();
+
 	return x;
 }
 
-#define xchg(ptr, x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+#define xchg(ptr, x)							\
+({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) & ~0xc);				\
+									\
+	((__typeof__(*(ptr)))						\
+		__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))));	\
+})
 
 extern void set_handler(unsigned long offset, void *addr, unsigned long len);
 extern void set_uncached_handler(unsigned long offset, void *addr, unsigned long len);

arch/mips/kernel/syscall.c

@@ -306,6 +306,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
 
 	if (cpu_has_llsc && R10000_LLSC_WAR) {
 		__asm__ __volatile__ (
+		"	.set	mips3					\n"
 		"	li	%[err], 0				\n"
 		"1:	ll	%[old], (%[addr])			\n"
 		"	move	%[tmp], %[new]				\n"
@@ -320,6 +321,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
 		"	"STR(PTR)"	1b, 4b				\n"
 		"	"STR(PTR)"	2b, 4b				\n"
 		"	.previous					\n"
+		"	.set	mips0					\n"
 		: [old] "=&r" (old),
 		  [err] "=&r" (err),
 		  [tmp] "=&r" (tmp)
@@ -329,6 +331,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
 		: "memory");
 	} else if (cpu_has_llsc) {
 		__asm__ __volatile__ (
+		"	.set	mips3					\n"
 		"	li	%[err], 0				\n"
 		"1:	ll	%[old], (%[addr])			\n"
 		"	move	%[tmp], %[new]				\n"
@@ -347,6 +350,7 @@ static inline int mips_atomic_set(struct pt_regs *regs,
 		"	"STR(PTR)"	1b, 5b				\n"
 		"	"STR(PTR)"	2b, 5b				\n"
 		"	.previous					\n"
+		"	.set	mips0					\n"
 		: [old] "=&r" (old),
 		  [err] "=&r" (err),
 		  [tmp] "=&r" (tmp)

arch/mips/rb532/devices.c

@@ -110,7 +110,6 @@ static struct korina_device korina_dev0_data = {
 static struct platform_device korina_dev0 = {
 	.id = -1,
 	.name = "korina",
-	.dev.driver_data = &korina_dev0_data,
 	.resource = korina_dev0_res,
 	.num_resources = ARRAY_SIZE(korina_dev0_res),
 };
@@ -332,6 +331,8 @@ static int __init plat_setup_devices(void)
 	/* set the uart clock to the current cpu frequency */
 	rb532_uart_res[0].uartclk = idt_cpu_freq;
 
+	dev_set_drvdata(&korina_dev0.dev, &korina_dev0_data);
+
 	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
 }
 

arch/powerpc/Kconfig.debug

@@ -46,7 +46,7 @@ config DEBUG_STACK_USAGE
 
 config HCALL_STATS
 	bool "Hypervisor call instrumentation"
-	depends on PPC_PSERIES && DEBUG_FS
+	depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
 	help
 	  Adds code to keep track of the number of hypervisor calls made and
 	  the amount of time spent in hypervisor calls.  Wall time spent in

arch/powerpc/configs/pseries_defconfig

@@ -1683,7 +1683,7 @@ CONFIG_HAVE_ARCH_KGDB=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
-CONFIG_HCALL_STATS=y
+# CONFIG_HCALL_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set

arch/powerpc/include/asm/emulated_ops.h

@@ -19,6 +19,7 @@
 #define _ASM_POWERPC_EMULATED_OPS_H
 
 #include <asm/atomic.h>
+#include <linux/perf_event.h>
 
 
 #ifdef CONFIG_PPC_EMULATED_STATS
@@ -57,7 +58,7 @@ extern u32 ppc_warn_emulated;
 
 extern void ppc_warn_emulated_print(const char *type);
 
-#define PPC_WARN_EMULATED(type)						 \
+#define __PPC_WARN_EMULATED(type)					 \
 	do {								 \
 		atomic_inc(&ppc_emulated.type.val);			 \
 		if (ppc_warn_emulated)					 \
@@ -66,8 +67,22 @@ extern void ppc_warn_emulated_print(const char *type);
 
 #else /* !CONFIG_PPC_EMULATED_STATS */
 
-#define PPC_WARN_EMULATED(type)	do { } while (0)
+#define __PPC_WARN_EMULATED(type)	do { } while (0)
 
 #endif /* !CONFIG_PPC_EMULATED_STATS */
 
+#define PPC_WARN_EMULATED(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS,		\
+			1, 0, regs, 0);					\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
+#define PPC_WARN_ALIGNMENT(type, regs)					\
+	do {								\
+		perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,		\
+			1, 0, regs, regs->dar);				\
+		__PPC_WARN_EMULATED(type);				\
+	} while (0)
+
 #endif /* _ASM_POWERPC_EMULATED_OPS_H */

arch/powerpc/include/asm/hvcall.h

@@ -274,6 +274,8 @@ struct hcall_stats {
 	unsigned long	num_calls;	/* number of calls (on this CPU) */
 	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
 	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+	unsigned long	tb_start;
+	unsigned long	purr_start;
 };
 #define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
 

arch/powerpc/include/asm/reg.h

@@ -489,6 +489,8 @@
 #define SPRN_MMCR1	798
 #define SPRN_MMCRA	0x312
 #define   MMCRA_SDSYNC	0x80000000UL /* SDAR synced with SIAR */
+#define   MMCRA_SDAR_DCACHE_MISS 0x40000000UL
+#define   MMCRA_SDAR_ERAT_MISS   0x20000000UL
 #define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
 #define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
 #define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */

arch/powerpc/include/asm/trace.h

@@ -0,0 +1,133 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM powerpc
+
+#if !defined(_TRACE_POWERPC_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_POWERPC_H
+
+#include <linux/tracepoint.h>
+
+struct pt_regs;
+
+TRACE_EVENT(irq_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(irq_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_entry,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+TRACE_EVENT(timer_interrupt_exit,
+
+	TP_PROTO(struct pt_regs *regs),
+
+	TP_ARGS(regs),
+
+	TP_STRUCT__entry(
+		__field(struct pt_regs *, regs)
+	),
+
+	TP_fast_assign(
+		__entry->regs = regs;
+	),
+
+	TP_printk("pt_regs=%p", __entry->regs)
+);
+
+#ifdef CONFIG_PPC_PSERIES
+extern void hcall_tracepoint_regfunc(void);
+extern void hcall_tracepoint_unregfunc(void);
+
+TRACE_EVENT_FN(hcall_entry,
+
+	TP_PROTO(unsigned long opcode, unsigned long *args),
+
+	TP_ARGS(opcode, args),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+	),
+
+	TP_printk("opcode=%lu", __entry->opcode),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+
+TRACE_EVENT_FN(hcall_exit,
+
+	TP_PROTO(unsigned long opcode, unsigned long retval,
+		unsigned long *retbuf),
+
+	TP_ARGS(opcode, retval, retbuf),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, opcode)
+		__field(unsigned long, retval)
+	),
+
+	TP_fast_assign(
+		__entry->opcode = opcode;
+		__entry->retval = retval;
+	),
+
+	TP_printk("opcode=%lu retval=%lu", __entry->opcode, __entry->retval),
+
+	hcall_tracepoint_regfunc, hcall_tracepoint_unregfunc
+);
+#endif
+
+#endif /* _TRACE_POWERPC_H */
+
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+
+#define TRACE_INCLUDE_PATH asm
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>

arch/powerpc/kernel/align.c

@@ -732,7 +732,7 @@ int fix_alignment(struct pt_regs *regs)
 
 #ifdef CONFIG_SPE
 	if ((instr >> 26) == 0x4) {
-		PPC_WARN_EMULATED(spe);
+		PPC_WARN_ALIGNMENT(spe, regs);
 		return emulate_spe(regs, reg, instr);
 	}
 #endif
@@ -786,7 +786,7 @@ int fix_alignment(struct pt_regs *regs)
 			flags |= SPLT;
 			nb = 8;
 		}
-		PPC_WARN_EMULATED(vsx);
+		PPC_WARN_ALIGNMENT(vsx, regs);
 		return emulate_vsx(addr, reg, areg, regs, flags, nb);
 	}
 #endif
@@ -794,7 +794,7 @@ int fix_alignment(struct pt_regs *regs)
 	 * the exception of DCBZ which is handled as a special case here
 	 */
 	if (instr == DCBZ) {
-		PPC_WARN_EMULATED(dcbz);
+		PPC_WARN_ALIGNMENT(dcbz, regs);
 		return emulate_dcbz(regs, addr);
 	}
 	if (unlikely(nb == 0))
@@ -804,7 +804,7 @@ int fix_alignment(struct pt_regs *regs)
 	 * function
 	 */
 	if (flags & M) {
-		PPC_WARN_EMULATED(multiple);
+		PPC_WARN_ALIGNMENT(multiple, regs);
 		return emulate_multiple(regs, addr, reg, nb,
 					flags, instr, swiz);
 	}
@@ -825,11 +825,11 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16) {
-		PPC_WARN_EMULATED(fp_pair);
+		PPC_WARN_ALIGNMENT(fp_pair, regs);
 		return emulate_fp_pair(addr, reg, flags);
 	}
 
-	PPC_WARN_EMULATED(unaligned);
+	PPC_WARN_ALIGNMENT(unaligned, regs);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values

arch/powerpc/kernel/entry_64.S

@@ -551,7 +551,7 @@ restore:
 BEGIN_FW_FTR_SECTION
 	ld	r5,SOFTE(r1)
 FW_FTR_SECTION_ELSE
-	b	iseries_check_pending_irqs
+	b	.Liseries_check_pending_irqs
 ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 2:
 	TRACE_AND_RESTORE_IRQ(r5);
@@ -623,7 +623,7 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
 
 #endif /* CONFIG_PPC_BOOK3E */
 
-iseries_check_pending_irqs:
+.Liseries_check_pending_irqs:
 #ifdef CONFIG_PPC_ISERIES
 	ld	r5,SOFTE(r1)
 	cmpdi	0,r5,0

arch/powerpc/kernel/exceptions-64s.S

@@ -185,12 +185,15 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	 * prolog code of the PerformanceMonitor one. A little
 	 * trickery is thus necessary
 	 */
+performance_monitor_pSeries_1:
 	. = 0xf00
 	b	performance_monitor_pSeries
 
+altivec_unavailable_pSeries_1:
 	. = 0xf20
 	b	altivec_unavailable_pSeries
 
+vsx_unavailable_pSeries_1:
 	. = 0xf40
 	b	vsx_unavailable_pSeries
 

arch/powerpc/kernel/irq.c

@@ -70,6 +70,8 @@
 #include <asm/firmware.h>
 #include <asm/lv1call.h>
 #endif
+#define CREATE_TRACE_POINTS
+#include <asm/trace.h>
 
 int __irq_offset_value;
 static int ppc_spurious_interrupts;
@@ -325,6 +327,8 @@ void do_IRQ(struct pt_regs *regs)
 	struct pt_regs *old_regs = set_irq_regs(regs);
 	unsigned int irq;
 
+	trace_irq_entry(regs);
+
 	irq_enter();
 
 	check_stack_overflow();
@@ -348,6 +352,8 @@ void do_IRQ(struct pt_regs *regs)
 		timer_interrupt(regs);
 	}
 #endif
+
+	trace_irq_exit(regs);
 }
 
 void __init init_IRQ(void)

arch/powerpc/kernel/perf_event.c

@@ -1165,7 +1165,7 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 */
 	if (record) {
 		struct perf_sample_data data = {
-			.addr	= 0,
+			.addr	= ~0ULL,
 			.period	= event->hw.last_period,
 		};
 

arch/powerpc/kernel/power5+-pmu.c

@@ -72,10 +72,6 @@
 #define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
 #define MMCR1_PMCSEL_MSK	0x7f
 
-/*
- * Bits in MMCRA
- */
-
 /*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000

arch/powerpc/kernel/power5-pmu.c

@@ -72,10 +72,6 @@
 #define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
 #define MMCR1_PMCSEL_MSK	0x7f
 
-/*
- * Bits in MMCRA
- */
-
 /*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
@@ -390,7 +386,7 @@ static int power5_compute_mmcr(u64 event[], int n_ev,
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, byte, psel;
 	unsigned int ttm, grp;
 	int i, isbus, bit, grsel;

arch/powerpc/kernel/power6-pmu.c

@@ -178,7 +178,7 @@ static int p6_compute_mmcr(u64 event[], int n_ev,
 			   unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	int i;
 	unsigned int pmc, ev, b, u, s, psel;
 	unsigned int ttmset = 0;

arch/powerpc/kernel/power7-pmu.c

@@ -50,10 +50,6 @@
 #define MMCR1_PMCSEL_SH(n)	(MMCR1_PMC1SEL_SH - (n) * 8)
 #define MMCR1_PMCSEL_MSK	0xff
 
-/*
- * Bits in MMCRA
- */
-
 /*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000
@@ -230,7 +226,7 @@ static int power7_compute_mmcr(u64 event[], int n_ev,
 			       unsigned int hwc[], unsigned long mmcr[])
 {
 	unsigned long mmcr1 = 0;
-	unsigned long mmcra = 0;
+	unsigned long mmcra = MMCRA_SDAR_DCACHE_MISS | MMCRA_SDAR_ERAT_MISS;
 	unsigned int pmc, unit, combine, l2sel, psel;
 	unsigned int pmc_inuse = 0;
 	int i;

arch/powerpc/kernel/ppc970-pmu.c

@@ -83,10 +83,6 @@ static short mmcr1_adder_bits[8] = {
 	MMCR1_PMC8_ADDER_SEL_SH
 };
 
-/*
- * Bits in MMCRA
- */
-
 /*
  * Layout of constraint bits:
  * 6666555555555544444444443333333333222222222211111111110000000000

arch/powerpc/kernel/setup-common.c

@@ -660,6 +660,7 @@ late_initcall(check_cache_coherency);
 
 #ifdef CONFIG_DEBUG_FS
 struct dentry *powerpc_debugfs_root;
+EXPORT_SYMBOL(powerpc_debugfs_root);
 
 static int powerpc_debugfs_init(void)
 {

arch/powerpc/kernel/setup_32.c

@@ -345,7 +345,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();

arch/powerpc/kernel/setup_64.c

@@ -550,7 +550,7 @@ void __init setup_arch(char **cmdline_p)
 
 #ifdef CONFIG_SWIOTLB
 	if (ppc_swiotlb_enable)
-		swiotlb_init();
+		swiotlb_init(1);
 #endif
 
 	paging_init();

arch/powerpc/kernel/time.c

@@ -54,6 +54,7 @@
 #include <linux/irq.h>
 #include <linux/delay.h>
 #include <linux/perf_event.h>
+#include <asm/trace.h>
 
 #include <asm/io.h>
 #include <asm/processor.h>
@@ -571,6 +572,8 @@ void timer_interrupt(struct pt_regs * regs)
 	struct clock_event_device *evt = &decrementer->event;
 	u64 now;
 
+	trace_timer_interrupt_entry(regs);
+
 	/* Ensure a positive value is written to the decrementer, or else
 	 * some CPUs will continuue to take decrementer exceptions */
 	set_dec(DECREMENTER_MAX);
@@ -590,6 +593,7 @@ void timer_interrupt(struct pt_regs * regs)
 		now = decrementer->next_tb - now;
 		if (now <= DECREMENTER_MAX)
 			set_dec((int)now);
+		trace_timer_interrupt_exit(regs);
 		return;
 	}
 	old_regs = set_irq_regs(regs);
@@ -620,6 +624,8 @@ void timer_interrupt(struct pt_regs * regs)
 
 	irq_exit();
 	set_irq_regs(old_regs);
+
+	trace_timer_interrupt_exit(regs);
 }
 
 void wakeup_decrementer(void)

arch/powerpc/kernel/traps.c

@@ -759,7 +759,7 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate the mfspr rD, PVR. */
 	if ((instword & PPC_INST_MFSPR_PVR_MASK) == PPC_INST_MFSPR_PVR) {
-		PPC_WARN_EMULATED(mfpvr);
+		PPC_WARN_EMULATED(mfpvr, regs);
 		rd = (instword >> 21) & 0x1f;
 		regs->gpr[rd] = mfspr(SPRN_PVR);
 		return 0;
@@ -767,7 +767,7 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulating the dcba insn is just a no-op.  */
 	if ((instword & PPC_INST_DCBA_MASK) == PPC_INST_DCBA) {
-		PPC_WARN_EMULATED(dcba);
+		PPC_WARN_EMULATED(dcba, regs);
 		return 0;
 	}
 
@@ -776,7 +776,7 @@ static int emulate_instruction(struct pt_regs *regs)
 		int shift = (instword >> 21) & 0x1c;
 		unsigned long msk = 0xf0000000UL >> shift;
 
-		PPC_WARN_EMULATED(mcrxr);
+		PPC_WARN_EMULATED(mcrxr, regs);
 		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
 		regs->xer &= ~0xf0000000UL;
 		return 0;
@@ -784,19 +784,19 @@ static int emulate_instruction(struct pt_regs *regs)
 
 	/* Emulate load/store string insn. */
 	if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
-		PPC_WARN_EMULATED(string);
+		PPC_WARN_EMULATED(string, regs);
 		return emulate_string_inst(regs, instword);
 	}
 
 	/* Emulate the popcntb (Population Count Bytes) instruction. */
 	if ((instword & PPC_INST_POPCNTB_MASK) == PPC_INST_POPCNTB) {
-		PPC_WARN_EMULATED(popcntb);
+		PPC_WARN_EMULATED(popcntb, regs);
 		return emulate_popcntb_inst(regs, instword);
 	}
 
 	/* Emulate isel (Integer Select) instruction */
 	if ((instword & PPC_INST_ISEL_MASK) == PPC_INST_ISEL) {
-		PPC_WARN_EMULATED(isel);
+		PPC_WARN_EMULATED(isel, regs);
 		return emulate_isel(regs, instword);
 	}
 
@@ -995,7 +995,7 @@ void SoftwareEmulation(struct pt_regs *regs)
 #ifdef CONFIG_MATH_EMULATION
 	errcode = do_mathemu(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(math);
+		PPC_WARN_EMULATED(math, regs);
 
 	switch (errcode) {
 	case 0:
@@ -1018,7 +1018,7 @@ void SoftwareEmulation(struct pt_regs *regs)
 #elif defined(CONFIG_8XX_MINIMAL_FPEMU)
 	errcode = Soft_emulate_8xx(regs);
 	if (errcode >= 0)
-		PPC_WARN_EMULATED(8xx);
+		PPC_WARN_EMULATED(8xx, regs);
 
 	switch (errcode) {
 	case 0:
@@ -1129,7 +1129,7 @@ void altivec_assist_exception(struct pt_regs *regs)
 
 	flush_altivec_to_thread(current);
 
-	PPC_WARN_EMULATED(altivec);
+	PPC_WARN_EMULATED(altivec, regs);
 	err = emulate_altivec(regs);
 	if (err == 0) {
 		regs->nip += 4;		/* skip emulated instruction */

arch/powerpc/lib/copypage_64.S

@@ -26,11 +26,11 @@ BEGIN_FTR_SECTION
 	srd	r8,r5,r11
 
 	mtctr	r8
-setup:
+.Lsetup:
 	dcbt	r9,r4
 	dcbz	r9,r3
 	add	r9,r9,r12
-	bdnz	setup
+	bdnz	.Lsetup
 END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
 	addi	r3,r3,-8
 	srdi    r8,r5,7		/* page is copied in 128 byte strides */

arch/powerpc/platforms/pseries/hvCall.S

@@ -14,68 +14,94 @@
 	
 #define STK_PARM(i)     (48 + ((i)-3)*8)
 
-#ifdef CONFIG_HCALL_STATS
+#ifdef CONFIG_TRACEPOINTS
+
+	.section	".toc","aw"
+
+	.globl hcall_tracepoint_refcount
+hcall_tracepoint_refcount:
+	.llong	0
+
+	.section	".text"
+
 /*
  * precall must preserve all registers.  use unused STK_PARM()
- * areas to save snapshots and opcode.
+ * areas to save snapshots and opcode. We branch around this
+ * in early init (eg when populating the MMU hashtable) by using an
+ * unconditional cpu feature.
  */
-#define HCALL_INST_PRECALL					\
-	std	r3,STK_PARM(r3)(r1);	/* save opcode */	\
-	mftb	r0;			/* get timebase and */	\
-	std     r0,STK_PARM(r5)(r1);	/* save for later */	\
+#define HCALL_INST_PRECALL(FIRST_REG)				\
 BEGIN_FTR_SECTION;						\
-	mfspr	r0,SPRN_PURR;		/* get PURR and */	\
-	std	r0,STK_PARM(r6)(r1);	/* save for later */	\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);
-	
+	b	1f;						\
+END_FTR_SECTION(0, 1);						\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	std	r3,STK_PARM(r3)(r1);				\
+	std	r4,STK_PARM(r4)(r1);				\
+	std	r5,STK_PARM(r5)(r1);				\
+	std	r6,STK_PARM(r6)(r1);				\
+	std	r7,STK_PARM(r7)(r1);				\
+	std	r8,STK_PARM(r8)(r1);				\
+	std	r9,STK_PARM(r9)(r1);				\
+	std	r10,STK_PARM(r10)(r1);				\
+	std	r0,16(r1);					\
+	addi	r4,r1,STK_PARM(FIRST_REG);			\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_entry;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	ld	r4,STK_PARM(r4)(r1);				\
+	ld	r5,STK_PARM(r5)(r1);				\
+	ld	r6,STK_PARM(r6)(r1);				\
+	ld	r7,STK_PARM(r7)(r1);				\
+	ld	r8,STK_PARM(r8)(r1);				\
+	ld	r9,STK_PARM(r9)(r1);				\
+	ld	r10,STK_PARM(r10)(r1);				\
+	mtlr	r0;						\
+1:
+
 /*
  * postcall is performed immediately before function return which
  * allows liberal use of volatile registers.  We branch around this
  * in early init (eg when populating the MMU hashtable) by using an
  * unconditional cpu feature.
  */
-#define HCALL_INST_POSTCALL					\
+#define __HCALL_INST_POSTCALL					\
 BEGIN_FTR_SECTION;						\
 	b	1f;						\
 END_FTR_SECTION(0, 1);						\
-	ld	r4,STK_PARM(r3)(r1);	/* validate opcode */	\
-	cmpldi	cr7,r4,MAX_HCALL_OPCODE;			\
-	bgt-	cr7,1f;						\
-								\
-	/* get time and PURR snapshots after hcall */		\
-	mftb	r7;			/* timebase after */	\
-BEGIN_FTR_SECTION;						\
-	mfspr	r8,SPRN_PURR;		/* PURR after */	\
-	ld	r6,STK_PARM(r6)(r1);	/* PURR before */	\
-	subf	r6,r6,r8;		/* delta */		\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
-	ld	r5,STK_PARM(r5)(r1);	/* timebase before */	\
-	subf	r5,r5,r7;		/* time delta */	\
-								\
-	/* calculate address of stat structure r4 = opcode */	\
-	srdi	r4,r4,2;		/* index into array */	\
-	mulli	r4,r4,HCALL_STAT_SIZE;				\
-	LOAD_REG_ADDR(r7, per_cpu__hcall_stats);		\
-	add	r4,r4,r7;					\
-	ld	r7,PACA_DATA_OFFSET(r13); /* per cpu offset */	\
-	add	r4,r4,r7;					\
-								\
-	/* update stats	*/					\
-	ld	r7,HCALL_STAT_CALLS(r4); /* count */		\
-	addi	r7,r7,1;					\
-	std	r7,HCALL_STAT_CALLS(r4);			\
-	ld      r7,HCALL_STAT_TB(r4);	/* timebase */		\
-	add	r7,r7,r5;					\
-	std	r7,HCALL_STAT_TB(r4);				\
-BEGIN_FTR_SECTION;						\
-	ld	r7,HCALL_STAT_PURR(r4);	/* PURR */		\
-	add	r7,r7,r6;					\
-	std	r7,HCALL_STAT_PURR(r4);				\
-END_FTR_SECTION_IFSET(CPU_FTR_PURR);				\
+	ld      r12,hcall_tracepoint_refcount@toc(r2);		\
+	cmpdi	r12,0;						\
+	beq+	1f;						\
+	mflr	r0;						\
+	ld	r6,STK_PARM(r3)(r1);				\
+	std	r3,STK_PARM(r3)(r1);				\
+	mr	r4,r3;						\
+	mr	r3,r6;						\
+	std	r0,16(r1);					\
+	stdu	r1,-STACK_FRAME_OVERHEAD(r1);			\
+	bl	.__trace_hcall_exit;				\
+	addi	r1,r1,STACK_FRAME_OVERHEAD;			\
+	ld	r0,16(r1);					\
+	ld	r3,STK_PARM(r3)(r1);				\
+	mtlr	r0;						\
 1:
+
+#define HCALL_INST_POSTCALL_NORETS				\
+	li	r5,0;						\
+	__HCALL_INST_POSTCALL
+
+#define HCALL_INST_POSTCALL(BUFREG)				\
+	mr	r5,BUFREG;					\
+	__HCALL_INST_POSTCALL
+
 #else
-#define HCALL_INST_PRECALL
-#define HCALL_INST_POSTCALL
+#define HCALL_INST_PRECALL(FIRST_ARG)
+#define HCALL_INST_POSTCALL_NORETS
+#define HCALL_INST_POSTCALL(BUFREG)
 #endif
 
 	.text
@@ -86,11 +112,11 @@ _GLOBAL(plpar_hcall_norets)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r4)
 
 	HVSC				/* invoke the hypervisor */
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL_NORETS
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -102,7 +128,7 @@ _GLOBAL(plpar_hcall)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -121,7 +147,7 @@ _GLOBAL(plpar_hcall)
 	std	r6, 16(r12)
 	std	r7, 24(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0
@@ -168,7 +194,7 @@ _GLOBAL(plpar_hcall9)
 	mfcr	r0
 	stw	r0,8(r1)
 
-	HCALL_INST_PRECALL
+	HCALL_INST_PRECALL(r5)
 
 	std     r4,STK_PARM(r4)(r1)     /* Save ret buffer */
 
@@ -196,7 +222,7 @@ _GLOBAL(plpar_hcall9)
 	std	r11,56(r12)
 	std	r0, 64(r12)
 
-	HCALL_INST_POSTCALL
+	HCALL_INST_POSTCALL(r12)
 
 	lwz	r0,8(r1)
 	mtcrf	0xff,r0

arch/powerpc/platforms/pseries/hvCall_inst.c

@@ -26,6 +26,7 @@
 #include <asm/hvcall.h>
 #include <asm/firmware.h>
 #include <asm/cputable.h>
+#include <asm/trace.h>
 
 DEFINE_PER_CPU(struct hcall_stats[HCALL_STAT_ARRAY_SIZE], hcall_stats);
 
@@ -100,6 +101,35 @@ static const struct file_operations hcall_inst_seq_fops = {
 #define	HCALL_ROOT_DIR		"hcall_inst"
 #define CPU_NAME_BUF_SIZE	32
 
+
+static void probe_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &get_cpu_var(hcall_stats)[opcode / 4];
+	h->tb_start = mftb();
+	h->purr_start = mfspr(SPRN_PURR);
+}
+
+static void probe_hcall_exit(unsigned long opcode, unsigned long retval,
+			     unsigned long *retbuf)
+{
+	struct hcall_stats *h;
+
+	if (opcode > MAX_HCALL_OPCODE)
+		return;
+
+	h = &__get_cpu_var(hcall_stats)[opcode / 4];
+	h->num_calls++;
+	h->tb_total = mftb() - h->tb_start;
+	h->purr_total = mfspr(SPRN_PURR) - h->purr_start;
+
+	put_cpu_var(hcall_stats);
+}
+
 static int __init hcall_inst_init(void)
 {
 	struct dentry *hcall_root;
@@ -110,6 +140,14 @@ static int __init hcall_inst_init(void)
 	if (!firmware_has_feature(FW_FEATURE_LPAR))
 		return 0;
 
+	if (register_trace_hcall_entry(probe_hcall_entry))
+		return -EINVAL;
+
+	if (register_trace_hcall_exit(probe_hcall_exit)) {
+		unregister_trace_hcall_entry(probe_hcall_entry);
+		return -EINVAL;
+	}
+
 	hcall_root = debugfs_create_dir(HCALL_ROOT_DIR, NULL);
 	if (!hcall_root)
 		return -ENOMEM;

arch/powerpc/platforms/pseries/lpar.c

@@ -39,6 +39,7 @@
 #include <asm/cputable.h>
 #include <asm/udbg.h>
 #include <asm/smp.h>
+#include <asm/trace.h>
 
 #include "plpar_wrappers.h"
 #include "pseries.h"
@@ -661,3 +662,35 @@ void arch_free_page(struct page *page, int order)
 EXPORT_SYMBOL(arch_free_page);
 
 #endif
+
+#ifdef CONFIG_TRACEPOINTS
+/*
+ * We optimise our hcall path by placing hcall_tracepoint_refcount
+ * directly in the TOC so we can check if the hcall tracepoints are
+ * enabled via a single load.
+ */
+
+/* NB: reg/unreg are called while guarded with the tracepoints_mutex */
+extern long hcall_tracepoint_refcount;
+
+void hcall_tracepoint_regfunc(void)
+{
+	hcall_tracepoint_refcount++;
+}
+
+void hcall_tracepoint_unregfunc(void)
+{
+	hcall_tracepoint_refcount--;
+}
+
+void __trace_hcall_entry(unsigned long opcode, unsigned long *args)
+{
+	trace_hcall_entry(opcode, args);
+}
+
+void __trace_hcall_exit(long opcode, unsigned long retval,
+			unsigned long *retbuf)
+{
+	trace_hcall_exit(opcode, retval, retbuf);
+}
+#endif

arch/s390/Kconfig

@@ -95,6 +95,34 @@ config S390
 	select HAVE_ARCH_TRACEHOOK
 	select INIT_ALL_POSSIBLE
 	select HAVE_PERF_EVENTS
+	select ARCH_INLINE_SPIN_TRYLOCK
+	select ARCH_INLINE_SPIN_TRYLOCK_BH
+	select ARCH_INLINE_SPIN_LOCK
+	select ARCH_INLINE_SPIN_LOCK_BH
+	select ARCH_INLINE_SPIN_LOCK_IRQ
+	select ARCH_INLINE_SPIN_LOCK_IRQSAVE
+	select ARCH_INLINE_SPIN_UNLOCK
+	select ARCH_INLINE_SPIN_UNLOCK_BH
+	select ARCH_INLINE_SPIN_UNLOCK_IRQ
+	select ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_READ_TRYLOCK
+	select ARCH_INLINE_READ_LOCK
+	select ARCH_INLINE_READ_LOCK_BH
+	select ARCH_INLINE_READ_LOCK_IRQ
+	select ARCH_INLINE_READ_LOCK_IRQSAVE
+	select ARCH_INLINE_READ_UNLOCK
+	select ARCH_INLINE_READ_UNLOCK_BH
+	select ARCH_INLINE_READ_UNLOCK_IRQ
+	select ARCH_INLINE_READ_UNLOCK_IRQRESTORE
+	select ARCH_INLINE_WRITE_TRYLOCK
+	select ARCH_INLINE_WRITE_LOCK
+	select ARCH_INLINE_WRITE_LOCK_BH
+	select ARCH_INLINE_WRITE_LOCK_IRQ
+	select ARCH_INLINE_WRITE_LOCK_IRQSAVE
+	select ARCH_INLINE_WRITE_UNLOCK
+	select ARCH_INLINE_WRITE_UNLOCK_BH
+	select ARCH_INLINE_WRITE_UNLOCK_IRQ
+	select ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE
 
 config SCHED_OMIT_FRAME_POINTER
 	bool

arch/s390/include/asm/bug.h

@@ -49,7 +49,7 @@
 
 #define BUG() do {					\
 	__EMIT_BUG(0);					\
-	for (;;);					\
+	unreachable();					\
 } while (0)
 
 #define WARN_ON(x) ({					\

arch/s390/include/asm/spinlock.h

@@ -191,33 +191,4 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 #define _raw_read_relax(lock)	cpu_relax()
 #define _raw_write_relax(lock)	cpu_relax()
 
-#define __always_inline__spin_lock
-#define __always_inline__read_lock
-#define __always_inline__write_lock
-#define __always_inline__spin_lock_bh
-#define __always_inline__read_lock_bh
-#define __always_inline__write_lock_bh
-#define __always_inline__spin_lock_irq
-#define __always_inline__read_lock_irq
-#define __always_inline__write_lock_irq
-#define __always_inline__spin_lock_irqsave
-#define __always_inline__read_lock_irqsave
-#define __always_inline__write_lock_irqsave
-#define __always_inline__spin_trylock
-#define __always_inline__read_trylock
-#define __always_inline__write_trylock
-#define __always_inline__spin_trylock_bh
-#define __always_inline__spin_unlock
-#define __always_inline__read_unlock
-#define __always_inline__write_unlock
-#define __always_inline__spin_unlock_bh
-#define __always_inline__read_unlock_bh
-#define __always_inline__write_unlock_bh
-#define __always_inline__spin_unlock_irq
-#define __always_inline__read_unlock_irq
-#define __always_inline__write_unlock_irq
-#define __always_inline__spin_unlock_irqrestore
-#define __always_inline__read_unlock_irqrestore
-#define __always_inline__write_unlock_irqrestore
-
 #endif /* __ASM_SPINLOCK_H */

arch/s390/kernel/ftrace.c

@@ -203,73 +203,10 @@ out:
 
 #ifdef CONFIG_FTRACE_SYSCALLS
 
-extern unsigned long __start_syscalls_metadata[];
-extern unsigned long __stop_syscalls_metadata[];
 extern unsigned int sys_call_table[];
 
-static struct syscall_metadata **syscalls_metadata;
-
-struct syscall_metadata *syscall_nr_to_meta(int nr)
-{
-	if (!syscalls_metadata || nr >= NR_syscalls || nr < 0)
-		return NULL;
-
-	return syscalls_metadata[nr];
-}
-
-int syscall_name_to_nr(char *name)
-{
-	int i;
-
-	if (!syscalls_metadata)
-		return -1;
-	for (i = 0; i < NR_syscalls; i++)
-		if (syscalls_metadata[i])
-			if (!strcmp(syscalls_metadata[i]->name, name))
-				return i;
-	return -1;
-}
-
-void set_syscall_enter_id(int num, int id)
-{
-	syscalls_metadata[num]->enter_id = id;
-}
-
-void set_syscall_exit_id(int num, int id)
+unsigned long __init arch_syscall_addr(int nr)
 {
-	syscalls_metadata[num]->exit_id = id;
-}
-
-static struct syscall_metadata *find_syscall_meta(unsigned long syscall)
-{
-	struct syscall_metadata *start;
-	struct syscall_metadata *stop;
-	char str[KSYM_SYMBOL_LEN];
-
-	start = (struct syscall_metadata *)__start_syscalls_metadata;
-	stop = (struct syscall_metadata *)__stop_syscalls_metadata;
-	kallsyms_lookup(syscall, NULL, NULL, NULL, str);
-
-	for ( ; start < stop; start++) {
-		if (start->name && !strcmp(start->name + 3, str + 3))
-			return start;
-	}
-	return NULL;
-}
-
-static int __init arch_init_ftrace_syscalls(void)
-{
-	struct syscall_metadata *meta;
-	int i;
-	syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) * NR_syscalls,
-				    GFP_KERNEL);
-	if (!syscalls_metadata)
-		return -ENOMEM;
-	for (i = 0; i < NR_syscalls; i++) {
-		meta = find_syscall_meta((unsigned long)sys_call_table[i]);
-		syscalls_metadata[i] = meta;
-	}
-	return 0;
+	return (unsigned long)sys_call_table[nr];
 }
-arch_initcall(arch_init_ftrace_syscalls);
 #endif