Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt

mvebu dt for 4.11 (part 2)

Switch device tree files to the new DSA binding

* tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
  ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
  ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
  ARM: dts: kirkwood-dir665: Utilize new DSA binding
  ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
  ARM: dts: armada-388-clearfog: Utilize new DSA binding
  ARM: dts: armada-385-linksys: Utilize new DSA binding
  ARM: dts: armada-370-rd: Utilize new DSA binding

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/armada-370-rd.dts

@@ -173,6 +173,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -235,6 +237,48 @@
 	phy0: ethernet-phy@0 {
 		reg = <0>;
 	};
+
+	switch: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan3";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 

arch/arm/boot/dts/armada-385-linksys.dtsi

@@ -103,8 +103,56 @@
 				};
 			};
 
-			mdio {
+			mdio@72004 {
 				status = "okay";
+
+				switch@0 {
+					compatible = "marvell,mv88e6095";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						port@0 {
+							reg = <0>;
+							label = "lan4";
+						};
+
+						port@1 {
+							reg = <1>;
+							label = "lan3";
+						};
+
+						port@2 {
+							reg = <2>;
+							label = "lan2";
+						};
+
+						port@3 {
+							reg = <3>;
+							label = "lan1";
+						};
+
+						port@4 {
+							reg = <4>;
+							label = "wan";
+						};
+
+						port@5 {
+							reg = <5>;
+							label = "cpu";
+							ethernet = <&eth2>;
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+							};
+						};
+					};
+				};
 			};
 
 			sata@a8000 {
@@ -261,6 +309,8 @@
 	};
 
 	dsa@0 {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;

arch/arm/boot/dts/armada-388-clearfog.dts

@@ -72,6 +72,8 @@
 	};
 
 	dsa@0 {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		dsa,ethernet = <&eth1>;
 		dsa,mii-bus = <&mdio>;
@@ -203,6 +205,69 @@
 	};
 };
 
+&mdio {
+	status = "okay";
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
 &spi1 {
 	/*
 	 * Add SPI CS pins for clearfog:

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -302,6 +302,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -398,3 +400,54 @@
 		spi-max-frequency = <40000000>;
 	};
 };
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan3";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-dir665.dts

@@ -194,6 +194,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -241,6 +243,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan4";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan3";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan2";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan1";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 /* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set

arch/arm/boot/dts/kirkwood-linksys-viper.dts

@@ -70,6 +70,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -207,6 +209,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <16>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "ethernet1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "ethernet2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "ethernet3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "ethernet4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "internet";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &uart0 {

arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts

@@ -112,6 +112,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -159,6 +161,53 @@
 
 &mdio {
 	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "wan";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
 };
 
 &eth0 {

arch/arm/boot/dts/kirkwood-rd88f6281-a.dts

@@ -19,11 +19,6 @@
 	model = "Marvell RD88f6281 Reference design, with A0 or higher SoC";
 	compatible = "marvell,rd88f6281-a", "marvell,rd88f6281","marvell,kirkwood-88f6281", "marvell,kirkwood";
 
-	dsa {
-		switch@0 {
-			reg = <10 0>;	 /* MDIO address 10, switch 0 in tree */
-		};
-	};
 };
 
 &mdio {
@@ -34,6 +29,10 @@
 	};
 };
 
+&switch {
+	reg = <10>;
+};
+
 &eth1 {
 	status = "okay";
 

arch/arm/boot/dts/kirkwood-rd88f6281-z0.dts

@@ -33,3 +33,14 @@
 &eth1 {
       status = "disabled";
 };
+
+&switch {
+	reg = <0>;
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+	};
+};

arch/arm/boot/dts/kirkwood-rd88f6281.dtsi

@@ -54,6 +54,8 @@
 	};
 
 	dsa {
+		status = "disabled";
+
 		compatible = "marvell,dsa";
 		#address-cells = <2>;
 		#size-cells = <0>;
@@ -115,6 +117,48 @@
 
 &mdio {
 	status = "okay";
+
+	switch: switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth0port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+		};
+	};
 };
 
 &eth0 {