[ARM] 3871/1: S3C24XX: Fix ordering of EINT4..23

The demux code for the IRQ EINTs above 3 was
using find last set instead of finding first
set.

Also fix it so that we only check EINT4..7
when the parent EINT4t7 goes off, and the
8..23 when EINT8t23 goes off.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-s3c2410/irq.c

@@ -569,18 +569,46 @@ s3c_irq_demux_uart2(unsigned int irq,
 }
 
 static void
-s3c_irq_demux_extint(unsigned int irq,
-		     struct irqdesc *desc,
-		     struct pt_regs *regs)
+s3c_irq_demux_extint8(unsigned int irq,
+		      struct irqdesc *desc,
+		      struct pt_regs *regs)
 {
 	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
 	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
 
 	eintpnd &= ~eintmsk;
+	eintpnd &= ~0xff;	/* ignore lower irqs */
 
-	if (eintpnd) {
-		irq = fls(eintpnd);
-		irq += (IRQ_EINT4 - (4 + 1));
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
+		desc_handle_irq(irq, irq_desc + irq, regs);
+	}
+
+}
+
+static void
+s3c_irq_demux_extint4t7(unsigned int irq,
+			struct irqdesc *desc,
+			struct pt_regs *regs)
+{
+	unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
+	unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
+
+	eintpnd &= ~eintmsk;
+	eintpnd &= 0xff;	/* only lower irqs */
+
+	/* we may as well handle all the pending IRQs here */
+
+	while (eintpnd) {
+		irq = __ffs(eintpnd);
+		eintpnd &= ~(1<<irq);
+
+		irq += (IRQ_EINT4 - 4);
 
 		desc_handle_irq(irq, irq_desc + irq, regs);
 	}
@@ -727,8 +755,8 @@ void __init s3c24xx_init_irq(void)
 
 	/* setup the cascade irq handlers */
 
-	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint);
-	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint);
+	set_irq_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
+	set_irq_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
 
 	set_irq_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
 	set_irq_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);