Merge branch 'imx' of git://git.pengutronix.de/git/ukl/linux-2.6 into mxc-master

arch/arm/configs/mx1ads_defconfig

@@ -1,742 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sun Mar 27 02:15:46 2005
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_IMX=y
-# CONFIG_ARCH_H720X is not set
-
-#
-# IMX Implementations
-#
-CONFIG_ARCH_MX1ADS=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-
-#
-# Bus support
-#
-CONFIG_ISA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_PREEMPT=y
-# CONFIG_LEDS is not set
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_FPE_FASTFPE=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_ROM=y
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=m
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_LL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y

arch/arm/configs/mx27_defconfig

@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
 CONFIG_MACH_PCM038=y
 CONFIG_MACH_PCM970_BASEBOARD=y
 CONFIG_MACH_MX27_3DS=y
-CONFIG_MACH_MX27LITE=y
+CONFIG_MACH_IMX27LITE=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 

arch/arm/mach-mx1/Makefile

@@ -10,5 +10,5 @@ obj-y			+= generic.o clock.o devices.o
 obj-$(CONFIG_MX1_VIDEO)	+= ksym_mx1.o mx1_camera_fiq.o
 
 # Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-obj-$(CONFIG_MACH_SCB9328) += scb9328.o
+obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
+obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o

arch/arm/mach-mx1/mx1ads.c → arch/arm/mach-mx1/mach-mx1ads.c

@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-imx/mx1ads.c
+ * arch/arm/mach-imx/mach-mx1ads.c
  *
  * Initially based on:
  *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c

arch/arm/mach-mx1/scb9328.c → arch/arm/mach-mx1/mach-scb9328.c

@@ -1,5 +1,5 @@
 /*
- * linux/arch/arm/mach-mx1/scb9328.c
+ * linux/arch/arm/mach-mx1/mach-scb9328.c
  *
  * Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
  * Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>

arch/arm/mach-mx2/Kconfig

@@ -55,7 +55,7 @@ config MACH_PCM970_BASEBOARD
 
 endchoice
 
-config MACH_EUKREA_CPUIMX27
+config MACH_CPUIMX27
 	bool "Eukrea CPUIMX27 module"
 	depends on MACH_MX27
 	help
@@ -64,14 +64,14 @@ config MACH_EUKREA_CPUIMX27
 
 config MACH_EUKREA_CPUIMX27_USESDHC2
 	bool "CPUIMX27 integrates SDHC2 module"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	help
 	  This adds support for the internal SDHC2 used on CPUIMX27 used
 	  for wifi or eMMC.
 
 choice
 	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX27
+	depends on MACH_CPUIMX27
 	default MACH_EUKREA_MBIMX27_BASEBOARD
 
 config MACH_EUKREA_MBIMX27_BASEBOARD
@@ -90,7 +90,7 @@ config MACH_MX27_3DS
 	  Include support for MX27PDK platform. This includes specific
 	  configurations for the board and its peripherals.
 
-config MACH_MX27LITE
+config MACH_IMX27LITE
 	bool "LogicPD MX27 LITEKIT platform"
 	depends on MACH_MX27
 	help

arch/arm/mach-mx2/Makefile

@@ -5,20 +5,22 @@
 # Object file lists.
 
 obj-y	:=  generic.o devices.o serial.o
+CFLAGS_generic.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_serial.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 
 obj-$(CONFIG_MACH_MX21) += clock_imx21.o
 
 obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
 obj-$(CONFIG_MACH_MX27) += clock_imx27.o
 
-obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
-obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
-obj-$(CONFIG_MACH_PCM038) += pcm038.o
+obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
+obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
+obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
 obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
-obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
-obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
+obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
+obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
+obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
-obj-$(CONFIG_MACH_PCA100) += pca100.o
-obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
-
+obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o

arch/arm/mach-mx2/clock_imx21.c

@@ -23,11 +23,242 @@
 #include <linux/module.h>
 
 #include <mach/clock.h>
+#include <mach/hardware.h>
 #include <mach/common.h>
 #include <asm/clkdev.h>
 #include <asm/div64.h>
 
-#include "crm_regs.h"
+#define IO_ADDR_CCM(off)	(MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_PRESC_OFFSET	29
+#define CCM_CSCR_PRESC_MASK	(0x7 << CCM_CSCR_PRESC_OFFSET)
+
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << CCM_CSCR_USB_OFFSET)
+#define CCM_CSCR_SD_OFFSET	24
+#define CCM_CSCR_SD_MASK	(0x3 << CCM_CSCR_SD_OFFSET)
+#define CCM_CSCR_SPLLRES	(1 << 22)
+#define CCM_CSCR_MPLLRES	(1 << 21)
+#define CCM_CSCR_SSI2_OFFSET	20
+#define CCM_CSCR_SSI2		(1 << CCM_CSCR_SSI2_OFFSET)
+#define CCM_CSCR_SSI1_OFFSET	19
+#define CCM_CSCR_SSI1		(1 << CCM_CSCR_SSI1_OFFSET)
+#define CCM_CSCR_FIR_OFFSET	18
+#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
+#define CCM_CSCR_SP		(1 << 17)
+#define CCM_CSCR_MCU		(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xf << CCM_CSCR_BCLK_OFFSET)
+#define CCM_CSCR_IPDIV_OFFSET	9
+#define CCM_CSCR_IPDIV		(1 << CCM_CSCR_IPDIV_OFFSET)
+
+#define CCM_CSCR_OSC26MDIV	(1 << 4)
+#define CCM_CSCR_OSC26M		(1 << 3)
+#define CCM_CSCR_FPM		(1 << 2)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		1
+
+#define CCM_MPCTL0_CPLM		(1 << 31)
+#define CCM_MPCTL0_PD_OFFSET	26
+#define CCM_MPCTL0_PD_MASK	(0xf << 26)
+#define CCM_MPCTL0_MFD_OFFSET	16
+#define CCM_MPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_MPCTL0_MFI_OFFSET	10
+#define CCM_MPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_MPCTL0_MFN_OFFSET	0
+#define CCM_MPCTL0_MFN_MASK	0x3ff
+
+#define CCM_MPCTL1_LF		(1 << 15)
+#define CCM_MPCTL1_BRMO		(1 << 6)
+
+#define CCM_SPCTL0_CPLM		(1 << 31)
+#define CCM_SPCTL0_PD_OFFSET	26
+#define CCM_SPCTL0_PD_MASK	(0xf << 26)
+#define CCM_SPCTL0_MFD_OFFSET	16
+#define CCM_SPCTL0_MFD_MASK	(0x3ff << 16)
+#define CCM_SPCTL0_MFI_OFFSET	10
+#define CCM_SPCTL0_MFI_MASK	(0xf << 10)
+#define CCM_SPCTL0_MFN_OFFSET	0
+#define CCM_SPCTL0_MFN_MASK	0x3ff
+
+#define CCM_SPCTL1_LF		(1 << 15)
+#define CCM_SPCTL1_BRMO		(1 << 6)
+
+#define CCM_OSC26MCTL_PEAK_OFFSET	16
+#define CCM_OSC26MCTL_PEAK_MASK		(0x3 << 16)
+#define CCM_OSC26MCTL_AGC_OFFSET	8
+#define CCM_OSC26MCTL_AGC_MASK		(0x3f << 8)
+#define CCM_OSC26MCTL_ANATEST_OFFSET	0
+#define CCM_OSC26MCTL_ANATEST_MASK	0x3f
+
+#define CCM_PCDR0_SSI2BAUDDIV_OFFSET	26
+#define CCM_PCDR0_SSI2BAUDDIV_MASK	(0x3f << 26)
+#define CCM_PCDR0_SSI1BAUDDIV_OFFSET	16
+#define CCM_PCDR0_SSI1BAUDDIV_MASK	(0x3f << 16)
+#define CCM_PCDR0_NFCDIV_OFFSET		12
+#define CCM_PCDR0_NFCDIV_MASK		(0xf << 12)
+#define CCM_PCDR0_48MDIV_OFFSET		5
+#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
+#define CCM_PCDR0_FIRIDIV_OFFSET	0
+#define CCM_PCDR0_FIRIDIV_MASK		0x1f
+#define CCM_PCDR1_PERDIV4_OFFSET	24
+#define CCM_PCDR1_PERDIV4_MASK		(0x3f << 24)
+#define CCM_PCDR1_PERDIV3_OFFSET	16
+#define CCM_PCDR1_PERDIV3_MASK		(0x3f << 16)
+#define CCM_PCDR1_PERDIV2_OFFSET	8
+#define CCM_PCDR1_PERDIV2_MASK		(0x3f << 8)
+#define CCM_PCDR1_PERDIV1_OFFSET	0
+#define CCM_PCDR1_PERDIV1_MASK		0x3f
+
+#define CCM_PCCR_HCLK_CSI_OFFSET	31
+#define CCM_PCCR_HCLK_CSI_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_DMA_OFFSET	30
+#define CCM_PCCR_HCLK_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_BROM_OFFSET	28
+#define CCM_PCCR_HCLK_BROM_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_EMMA_OFFSET	27
+#define CCM_PCCR_HCLK_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_LCDC_OFFSET	26
+#define CCM_PCCR_HCLK_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_SLCDC_OFFSET	25
+#define CCM_PCCR_HCLK_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_HCLK_USBOTG_OFFSET	24
+#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
+#define CCM_PCCR_HCLK_BMI_OFFSET	23
+#define CCM_PCCR_BMI_MASK		(1 << CCM_PCCR_BMI_MASK)
+#define CCM_PCCR_HCLK_BMI_REG		CCM_PCCR0
+#define CCM_PCCR_PERCLK4_OFFSET		22
+#define CCM_PCCR_PERCLK4_REG		CCM_PCCR0
+#define CCM_PCCR_SLCDC_OFFSET		21
+#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_BAUD_OFFSET	20
+#define CCM_PCCR_FIRI_BAUD_MASK		(1 << CCM_PCCR_FIRI_BAUD_MASK)
+#define CCM_PCCR_FIRI_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_NFC_OFFSET		19
+#define CCM_PCCR_NFC_REG		CCM_PCCR0
+#define CCM_PCCR_LCDC_OFFSET		18
+#define CCM_PCCR_LCDC_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_BAUD_OFFSET	17
+#define CCM_PCCR_SSI1_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_BAUD_OFFSET	16
+#define CCM_PCCR_SSI2_BAUD_REG		CCM_PCCR0
+#define CCM_PCCR_EMMA_OFFSET		15
+#define CCM_PCCR_EMMA_REG		CCM_PCCR0
+#define CCM_PCCR_USBOTG_OFFSET		14
+#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
+#define CCM_PCCR_DMA_OFFSET		13
+#define CCM_PCCR_DMA_REG		CCM_PCCR0
+#define CCM_PCCR_I2C1_OFFSET		12
+#define CCM_PCCR_I2C1_REG		CCM_PCCR0
+#define CCM_PCCR_GPIO_OFFSET		11
+#define CCM_PCCR_GPIO_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC2_OFFSET		10
+#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
+#define CCM_PCCR_SDHC1_OFFSET		9
+#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
+#define CCM_PCCR_FIRI_OFFSET		8
+#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
+#define CCM_PCCR_FIRI_REG		CCM_PCCR0
+#define CCM_PCCR_SSI2_IPG_OFFSET	7
+#define CCM_PCCR_SSI2_REG		CCM_PCCR0
+#define CCM_PCCR_SSI1_IPG_OFFSET	6
+#define CCM_PCCR_SSI1_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI2_OFFSET		5
+#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
+#define CCM_PCCR_CSPI1_OFFSET		4
+#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
+#define CCM_PCCR_UART4_OFFSET		3
+#define CCM_PCCR_UART4_REG		CCM_PCCR0
+#define CCM_PCCR_UART3_OFFSET		2
+#define CCM_PCCR_UART3_REG		CCM_PCCR0
+#define CCM_PCCR_UART2_OFFSET		1
+#define CCM_PCCR_UART2_REG		CCM_PCCR0
+#define CCM_PCCR_UART1_OFFSET		0
+#define CCM_PCCR_UART1_REG		CCM_PCCR0
+
+#define CCM_PCCR_OWIRE_OFFSET		31
+#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
+#define CCM_PCCR_KPP_OFFSET		30
+#define CCM_PCCR_KPP_REG		CCM_PCCR1
+#define CCM_PCCR_RTC_OFFSET		29
+#define CCM_PCCR_RTC_REG		CCM_PCCR1
+#define CCM_PCCR_PWM_OFFSET		28
+#define CCM_PCCR_PWM_REG		CCM_PCCR1
+#define CCM_PCCR_GPT3_OFFSET		27
+#define CCM_PCCR_GPT3_REG		CCM_PCCR1
+#define CCM_PCCR_GPT2_OFFSET		26
+#define CCM_PCCR_GPT2_REG		CCM_PCCR1
+#define CCM_PCCR_GPT1_OFFSET		25
+#define CCM_PCCR_GPT1_REG		CCM_PCCR1
+#define CCM_PCCR_WDT_OFFSET		24
+#define CCM_PCCR_WDT_REG		CCM_PCCR1
+#define CCM_PCCR_CSPI3_OFFSET		23
+#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
+
+#define CCM_PCCR_CSPI1_MASK		(1 << CCM_PCCR_CSPI1_OFFSET)
+#define CCM_PCCR_CSPI2_MASK		(1 << CCM_PCCR_CSPI2_OFFSET)
+#define CCM_PCCR_CSPI3_MASK		(1 << CCM_PCCR_CSPI3_OFFSET)
+#define CCM_PCCR_DMA_MASK		(1 << CCM_PCCR_DMA_OFFSET)
+#define CCM_PCCR_EMMA_MASK		(1 << CCM_PCCR_EMMA_OFFSET)
+#define CCM_PCCR_GPIO_MASK		(1 << CCM_PCCR_GPIO_OFFSET)
+#define CCM_PCCR_GPT1_MASK		(1 << CCM_PCCR_GPT1_OFFSET)
+#define CCM_PCCR_GPT2_MASK		(1 << CCM_PCCR_GPT2_OFFSET)
+#define CCM_PCCR_GPT3_MASK		(1 << CCM_PCCR_GPT3_OFFSET)
+#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
+#define CCM_PCCR_HCLK_CSI_MASK		(1 << CCM_PCCR_HCLK_CSI_OFFSET)
+#define CCM_PCCR_HCLK_DMA_MASK		(1 << CCM_PCCR_HCLK_DMA_OFFSET)
+#define CCM_PCCR_HCLK_EMMA_MASK		(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
+#define CCM_PCCR_HCLK_LCDC_MASK		(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
+#define CCM_PCCR_HCLK_SLCDC_MASK	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
+#define CCM_PCCR_HCLK_USBOTG_MASK	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
+#define CCM_PCCR_I2C1_MASK		(1 << CCM_PCCR_I2C1_OFFSET)
+#define CCM_PCCR_KPP_MASK		(1 << CCM_PCCR_KPP_OFFSET)
+#define CCM_PCCR_LCDC_MASK		(1 << CCM_PCCR_LCDC_OFFSET)
+#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
+#define CCM_PCCR_OWIRE_MASK		(1 << CCM_PCCR_OWIRE_OFFSET)
+#define CCM_PCCR_PERCLK4_MASK		(1 << CCM_PCCR_PERCLK4_OFFSET)
+#define CCM_PCCR_PWM_MASK		(1 << CCM_PCCR_PWM_OFFSET)
+#define CCM_PCCR_RTC_MASK		(1 << CCM_PCCR_RTC_OFFSET)
+#define CCM_PCCR_SDHC1_MASK		(1 << CCM_PCCR_SDHC1_OFFSET)
+#define CCM_PCCR_SDHC2_MASK		(1 << CCM_PCCR_SDHC2_OFFSET)
+#define CCM_PCCR_SLCDC_MASK		(1 << CCM_PCCR_SLCDC_OFFSET)
+#define CCM_PCCR_SSI1_BAUD_MASK		(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
+#define CCM_PCCR_SSI1_IPG_MASK		(1 << CCM_PCCR_SSI1_IPG_OFFSET)
+#define CCM_PCCR_SSI2_BAUD_MASK		(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
+#define CCM_PCCR_SSI2_IPG_MASK		(1 << CCM_PCCR_SSI2_IPG_OFFSET)
+#define CCM_PCCR_UART1_MASK		(1 << CCM_PCCR_UART1_OFFSET)
+#define CCM_PCCR_UART2_MASK		(1 << CCM_PCCR_UART2_OFFSET)
+#define CCM_PCCR_UART3_MASK		(1 << CCM_PCCR_UART3_OFFSET)
+#define CCM_PCCR_UART4_MASK		(1 << CCM_PCCR_UART4_OFFSET)
+#define CCM_PCCR_USBOTG_MASK		(1 << CCM_PCCR_USBOTG_OFFSET)
+#define CCM_PCCR_WDT_MASK		(1 << CCM_PCCR_WDT_OFFSET)
+
+#define CCM_CCSR_32KSR		(1 << 15)
+
+#define CCM_CCSR_CLKMODE1	(1 << 9)
+#define CCM_CCSR_CLKMODE0	(1 << 8)
+
+#define CCM_CCSR_CLKOSEL_OFFSET 0
+#define CCM_CCSR_CLKOSEL_MASK	0x1f
+
+#define SYS_FMCR		0x14	/* Functional Muxing Control Reg */
+#define SYS_CHIP_ID		0x00	/* The offset of CHIP ID register */
 
 static int _clk_enable(struct clk *clk)
 {
@@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&uart_clk[0]);
 #endif
 
-	mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+			MX21_INT_GPT1);
 	return 0;
 }

arch/arm/mach-mx2/clock_imx27.c

@@ -29,21 +29,23 @@
 #include <mach/common.h>
 #include <mach/hardware.h>
 
+#define IO_ADDR_CCM(off)	(MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
 /* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
+#define CCM_CSCR		IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0		IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1		IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0		IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1		IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL		IO_ADDR_CCM(0x14)
+#define CCM_PCDR0		IO_ADDR_CCM(0x18)
+#define CCM_PCDR1		IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0		IO_ADDR_CCM(0x20)
+#define CCM_PCCR1		IO_ADDR_CCM(0x24)
+#define CCM_CCSR		IO_ADDR_CCM(0x28)
+#define CCM_PMCTL		IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT		IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL		IO_ADDR_CCM(0x34)
 
 #define CCM_CSCR_UPDATE_DIS	(1 << 31)
 #define CCM_CSCR_SSI2		(1 << 23)
@@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&uart1_clk);
 #endif
 
-	mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
+	mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+			MX27_INT_GPT1);
 
 	return 0;
 }

arch/arm/mach-mx2/cpu_imx27.c

@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
 	 * the silicon revision very early we read it here to
 	 * avoid any further hooks
 	*/
-	val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
+	val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+				+ SYS_CHIP_ID));
 
 	cpu_silicon_rev = (int)(val >> 28);
 	cpu_partnumber = (int)((val >> 12) & 0xFFFF);

arch/arm/mach-mx2/crm_regs.h

@@ -1,258 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
-
-#include <mach/hardware.h>
-
-/* Register offsets */
-#define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
-#define CCM_MPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
-#define CCM_MPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
-#define CCM_SPCTL0              (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
-#define CCM_SPCTL1              (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
-#define CCM_OSC26MCTL           (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
-#define CCM_PCDR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
-#define CCM_PCDR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
-#define CCM_PCCR0               (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
-#define CCM_PCCR1               (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
-#define CCM_CCSR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
-#define CCM_PMCTL               (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
-#define CCM_PMCOUNT             (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
-#define CCM_WKGDCTL             (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
-
-#define CCM_CSCR_PRESC_OFFSET   29
-#define CCM_CSCR_PRESC_MASK     (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET     26
-#define CCM_CSCR_USB_MASK       (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET      24
-#define CCM_CSCR_SD_MASK        (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES        (1 << 22)
-#define CCM_CSCR_MPLLRES        (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET    20
-#define CCM_CSCR_SSI2           (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET    19
-#define CCM_CSCR_SSI1           (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET    	18
-#define CCM_CSCR_FIR		(1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP             (1 << 17)
-#define CCM_CSCR_MCU            (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET	10
-#define CCM_CSCR_BCLK_MASK      (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET   9
-#define CCM_CSCR_IPDIV          (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV      (1 << 4)
-#define CCM_CSCR_OSC26M         (1 << 3)
-#define CCM_CSCR_FPM            (1 << 2)
-#define CCM_CSCR_SPEN           (1 << 1)
-#define CCM_CSCR_MPEN           1
-
-
-
-#define CCM_MPCTL0_CPLM         (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET    26
-#define CCM_MPCTL0_PD_MASK      (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET   16
-#define CCM_MPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET   10
-#define CCM_MPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET   0
-#define CCM_MPCTL0_MFN_MASK     0x3ff
-
-#define CCM_MPCTL1_LF           (1 << 15)
-#define CCM_MPCTL1_BRMO         (1 << 6)
-
-#define CCM_SPCTL0_CPLM         (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET    26
-#define CCM_SPCTL0_PD_MASK      (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET   16
-#define CCM_SPCTL0_MFD_MASK     (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET   10
-#define CCM_SPCTL0_MFI_MASK     (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET   0
-#define CCM_SPCTL0_MFN_MASK     0x3ff
-
-#define CCM_SPCTL1_LF           (1 << 15)
-#define CCM_SPCTL1_BRMO         (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET       16
-#define CCM_OSC26MCTL_PEAK_MASK         (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET        8
-#define CCM_OSC26MCTL_AGC_MASK          (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET    0
-#define CCM_OSC26MCTL_ANATEST_MASK      0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET    26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK      (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET    16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK      (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET         12
-#define CCM_PCDR0_NFCDIV_MASK           (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET		5
-#define CCM_PCDR0_48MDIV_MASK		(0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET	0
-#define CCM_PCDR0_FIRIDIV_MASK		0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET        24
-#define CCM_PCDR1_PERDIV4_MASK          (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET        16
-#define CCM_PCDR1_PERDIV3_MASK          (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET        8
-#define CCM_PCDR1_PERDIV2_MASK          (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET        0
-#define CCM_PCDR1_PERDIV1_MASK          0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET       	31
-#define CCM_PCCR_HCLK_CSI_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET       	30
-#define CCM_PCCR_HCLK_DMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET      	28
-#define CCM_PCCR_HCLK_BROM_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET      	27
-#define CCM_PCCR_HCLK_EMMA_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET      	26
-#define CCM_PCCR_HCLK_LCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET     	25
-#define CCM_PCCR_HCLK_SLCDC_REG	        CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET    	24
-#define CCM_PCCR_HCLK_USBOTG_REG	CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET    	23
-#define CCM_PCCR_BMI_MASK          	(1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG	    	CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET        	22
-#define CCM_PCCR_PERCLK4_REG	    	CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET          	21
-#define CCM_PCCR_SLCDC_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET       20
-#define CCM_PCCR_FIRI_BAUD_MASK         (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG	        CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET		19
-#define CCM_PCCR_NFC_REG		CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET           	18
-#define CCM_PCCR_LCDC_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET      	17
-#define CCM_PCCR_SSI1_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET      	16
-#define CCM_PCCR_SSI2_BAUD_REG	    	CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET           	15
-#define CCM_PCCR_EMMA_REG		CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET         	14
-#define CCM_PCCR_USBOTG_REG		CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET            	13
-#define CCM_PCCR_DMA_REG            	CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET           	12
-#define CCM_PCCR_I2C1_REG		CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET           	11
-#define CCM_PCCR_GPIO_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET          	10
-#define CCM_PCCR_SDHC2_REG		CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET          	9
-#define CCM_PCCR_SDHC1_REG		CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET		8
-#define CCM_PCCR_FIRI_MASK		(1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG		CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET       	7
-#define CCM_PCCR_SSI2_REG		CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET       	6
-#define CCM_PCCR_SSI1_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET		5
-#define	CCM_PCCR_CSPI2_REG		CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET		4
-#define	CCM_PCCR_CSPI1_REG		CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET          	3
-#define CCM_PCCR_UART4_REG		CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET          	2
-#define CCM_PCCR_UART3_REG		CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET          	1
-#define CCM_PCCR_UART2_REG		CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET          	0
-#define CCM_PCCR_UART1_REG		CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET          	31
-#define CCM_PCCR_OWIRE_REG		CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET            	30
-#define CCM_PCCR_KPP_REG		CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET            	29
-#define CCM_PCCR_RTC_REG		CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET            	28
-#define CCM_PCCR_PWM_REG		CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET           	27
-#define CCM_PCCR_GPT3_REG		CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET           	26
-#define CCM_PCCR_GPT2_REG		CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET           	25
-#define CCM_PCCR_GPT1_REG		CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET            	24
-#define CCM_PCCR_WDT_REG		CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET		23
-#define	CCM_PCCR_CSPI3_REG		CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK            	(1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK            	(1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK            	(1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK              	(1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK             	(1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK             	(1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK             	(1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK             	(1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK             	(1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK		(1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK         	(1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK         	(1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK        	(1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK        	(1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK       	(1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK      	(1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK             	(1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK              	(1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK             	(1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK		(1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK            	(1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK          	(1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK              	(1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK              	(1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK            	(1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK            	(1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK            	(1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK        	(1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK         	(1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK        	(1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK         	(1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK            	(1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK            	(1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK            	(1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK            	(1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK           	(1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK              	(1 << CCM_PCCR_WDT_OFFSET)
-
-
-#define CCM_CCSR_32KSR          (1 << 15)
-
-#define CCM_CCSR_CLKMODE1       (1 << 9)
-#define CCM_CCSR_CLKMODE0       (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK   0x1f
-
-#define SYS_FMCR                0x14	/*  Functional Muxing Control Reg */
-#define SYS_CHIP_ID             0x00	/* The offset of CHIP ID register */
-
-#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */

arch/arm/mach-mx2/eukrea_cpuimx27.c → arch/arm/mach-mx2/mach-cpuimx27.c

@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
 		.irq = IRQ_GPIOB(23),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
 		.irq = IRQ_GPIOB(22),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
 		.irq = IRQ_GPIOB(27),
 		.uartclk = 14745600,
 		.regshift = 1,
 		.iotype = UPIO_MEM,
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
-		.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
+		.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
 		.irq = IRQ_GPIOB(30),
 		.uartclk = 14745600,
 		.regshift = 1,
@@ -224,8 +224,8 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 };
 
 MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/mx27lite.c → arch/arm/mach-mx2/mach-imx27lite.c

@@ -85,8 +85,8 @@ static struct sys_timer mx27lite_timer = {
 };
 
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/mx21ads.c → arch/arm/mach-mx2/mach-mx21ads.c

@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
 };
 
 static struct resource mx21ads_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + 0x02000000 - 1,
+	.start = MX21_CS0_BASE_ADDR,
+	.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
 	 */
 	{
 		.virtual = MX21ADS_MMIO_BASE_ADDR,
-		.pfn = __phys_to_pfn(CS1_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
 		.length = MX21ADS_MMIO_SIZE,
 		.type = MT_DEVICE,
 	},
@@ -284,8 +284,8 @@ static struct sys_timer mx21ads_timer = {
 
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX21_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx21ads_map_io,
 	.init_irq       = mx21_init_irq,

arch/arm/mach-mx2/mx27pdk.c → arch/arm/mach-mx2/mach-mx27_3ds.c

@@ -85,8 +85,8 @@ static struct sys_timer mx27pdk_timer = {
 
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/mx27ads.c → arch/arm/mach-mx2/mach-mx27ads.c

@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
 static struct map_desc mx27ads_io_desc[] __initdata = {
 	{
 		.virtual = PBC_BASE_ADDRESS,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
+		.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
 		.length = SZ_1M,
 		.type = MT_DEVICE,
 	},
@@ -334,8 +334,8 @@ static void __init mx27ads_map_io(void)
 
 MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
 	/* maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27ads_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/mxt_td60.c → arch/arm/mach-mx2/mach-mxt_td60.c

@@ -58,21 +58,6 @@ static unsigned int mxt_td60_pins[] __initdata = {
 	PE9_PF_UART3_RXD,
 	PE10_PF_UART3_CTS,
 	PE11_PF_UART3_RTS,
-	/* UART3 */
-	PB26_AF_UART4_RTS,
-	PB28_AF_UART4_TXD,
-	PB29_AF_UART4_CTS,
-	PB31_AF_UART4_RXD,
-	/* UART4 */
-	PB18_AF_UART5_TXD,
-	PB19_AF_UART5_RXD,
-	PB20_AF_UART5_CTS,
-	PB21_AF_UART5_RTS,
-	/* UART5 */
-	PB10_AF_UART6_TXD,
-	PB12_AF_UART6_CTS,
-	PB11_AF_UART6_RXD,
-	PB13_AF_UART6_RTS,
 	/* FEC */
 	PD0_AIN_FEC_TXD0,
 	PD1_AIN_FEC_TXD1,
@@ -261,12 +246,6 @@ static struct imxuart_platform_data uart_pdata[] = {
 		.flags = IMXUART_HAVE_RTSCTS,
 	}, {
 		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
-	}, {
-		.flags = IMXUART_HAVE_RTSCTS,
 	},
 };
 
@@ -278,9 +257,6 @@ static void __init mxt_td60_board_init(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
-	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
-	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
 	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
 
 	i2c_register_board_info(0, mxt_td60_i2c_devices,
@@ -308,8 +284,8 @@ static struct sys_timer mxt_td60_timer = {
 
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
 	/* maintainer: Maxtrack Industrial */
-	.phys_io	= AIPI_BASE_ADDR,
-	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX27_AIPI_BASE_ADDR,
+	.io_pg_offst	= ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx27_map_io,
 	.init_irq	= mx27_init_irq,

arch/arm/mach-mx2/pca100.c → arch/arm/mach-mx2/mach-pca100.c

@@ -233,8 +233,8 @@ static struct sys_timer pca100_timer = {
 };
 
 MACHINE_START(PCA100, "phyCARD-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/pcm038.c → arch/arm/mach-mx2/mach-pcm038.c

@@ -108,8 +108,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS1_BASE_ADDR,
-	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX27_CS1_BASE_ADDR,
+	.end   = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -173,9 +173,7 @@ static struct platform_device *platform_devices[] __initdata = {
  * setup other stuffs to access the sram. */
 static void __init pcm038_init_sram(void)
 {
-	__raw_writel(0x0000d843, CSCR_U(1));
-	__raw_writel(0x22252521, CSCR_L(1));
-	__raw_writel(0x22220a00, CSCR_A(1));
+	mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
 }
 
 static struct imxi2c_platform_data pcm038_i2c_1_data = {
@@ -328,8 +326,8 @@ static struct sys_timer pcm038_timer = {
 };
 
 MACHINE_START(PCM038, "phyCORE-i.MX27")
-	.phys_io        = AIPI_BASE_ADDR,
-	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX27_AIPI_BASE_ADDR,
+	.io_pg_offst    = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
 	.init_irq       = mx27_init_irq,

arch/arm/mach-mx2/pcm970-baseboard.c

@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS4_BASE_ADDR,
-		.end     = CS4_BASE_ADDR + 0x100 - 1,
+		.start   = MX27_CS4_BASE_ADDR,
+		.end     = MX27_CS4_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IRQ_GPIOE(19),

arch/arm/mach-mx25/clock.c

@@ -173,6 +173,7 @@ DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
 DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
 DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
 DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,6 +205,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
 int __init mx25_clocks_init(unsigned long fref)

arch/arm/mach-mx25/devices.c

@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};

arch/arm/mach-mx25/devices.h

@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;

arch/arm/mach-mx25/mx25pdk.c

@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,16 +36,57 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)

arch/arm/mach-mx3/Kconfig

@@ -49,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -63,7 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
-	select MXC_ULPI
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.

arch/arm/mach-mx3/Makefile

@@ -5,18 +5,22 @@
 # Object file lists.
 
 obj-y				:= mm.o devices.o cpu.o
-obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
+CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_ARCH_MX31)		+= clock-imx31.o iomux-imx31.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
-obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
-obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
-obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
-obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
-obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
-obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o mx31moboard-devboard.o \
+obj-$(CONFIG_MACH_MX31ADS)	+= mach-mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY)	+= mach-mx31lilly.o mx31lilly-db.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mach-mx31lite.o mx31lite-db.o
+obj-$(CONFIG_MACH_PCM037)	+= mach-pcm037.o
+obj-$(CONFIG_MACH_PCM037_EET)	+= mach-pcm037_eet.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mach-mx31_3ds.o
+CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mach-mx31moboard.o mx31moboard-devboard.o \
 				   mx31moboard-marxbot.o
-obj-$(CONFIG_MACH_QONG)		+= qong.o
-obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
-obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
-obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
-obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
+obj-$(CONFIG_MACH_QONG)		+= mach-qong.o
+obj-$(CONFIG_MACH_PCM043)	+= mach-pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS)	+= mach-mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= mach-kzm_arm11_01.o

arch/arm/mach-mx3/clock.c → arch/arm/mach-mx3/clock-imx31.c

@@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	mx31_read_cpu_rev();
 
-	if (mx31_revision() >= CHIP_REV_2_0) {
+	if (mx31_revision() >= MX31_CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
 		reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
 		__raw_writel(reg, MXC_CCM_PMCR1);
 	}
 
-	mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+			MX31_INT_GPT);
 
 	return 0;
 }

arch/arm/mach-mx3/clock-imx35.c

@@ -28,7 +28,7 @@
 #include <mach/hardware.h>
 #include <mach/common.h>
 
-#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define CCM_BASE	MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
 
 #define CCM_CCMR        0x00
 #define CCM_PDR0        0x04
@@ -504,7 +504,8 @@ int __init mx35_clocks_init()
 	__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
 	__raw_writel(0, CCM_BASE + CCM_CGR3);
 
-	mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
+	mxc_timer_init(&gpt_clk,
+			MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
 
 	return 0;
 }

arch/arm/mach-mx3/cpu.c

@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
 	u32 i, srev;
 
 	/* read SREV register from IIM module */
-	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
 
 	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
 		if (srev == mx31_cpu_type[i].srev) {

arch/arm/mach-mx3/crm_regs.h

@@ -24,7 +24,7 @@
 #define CKIH_CLK_FREQ_27MHZ     27000000
 #define CKIL_CLK_FREQ           32768
 
-#define MXC_CCM_BASE		IO_ADDRESS(CCM_BASE_ADDR)
+#define MXC_CCM_BASE		MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
 
 /* Register addresses */
 #define MXC_CCM_CCMR		(MXC_CCM_BASE + 0x00)

arch/arm/mach-mx3/iomux.c → arch/arm/mach-mx3/iomux-imx31.c

@@ -29,7 +29,7 @@
 /*
  * IOMUX register (base) addresses
  */
-#define IOMUX_BASE	IO_ADDRESS(IOMUXC_BASE_ADDR)
+#define IOMUX_BASE	MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
 #define IOMUXINT_OBS1	(IOMUX_BASE + 0x000)
 #define IOMUXINT_OBS2	(IOMUX_BASE + 0x004)
 #define IOMUXGPR	(IOMUX_BASE + 0x008)

arch/arm/mach-mx3/armadillo5x0.c → arch/arm/mach-mx3/mach-armadillo5x0.c

@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
 
 static struct resource armadillo5x0_nor_flash_resource = {
 	.flags		= IORESOURCE_MEM,
-	.start		= CS0_BASE_ADDR,
-	.end		= CS0_BASE_ADDR + SZ_64M - 1,
+	.start		= MX31_CS0_BASE_ADDR,
+	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
 static struct platform_device armadillo5x0_nor_flash = {
@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
  */
 static struct resource armadillo5x0_smc911x_resources[] = {
 	{
-		.start	= CS3_BASE_ADDR,
-		.end	= CS3_BASE_ADDR + SZ_32M - 1,
+		.start	= MX31_CS3_BASE_ADDR,
+		.end	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
@@ -406,8 +406,8 @@ static struct sys_timer armadillo5x0_timer = {
 
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
 	/* Maintainer: Alberto Panizzo  */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x00000100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,

arch/arm/mach-mx3/kzmarm11.c → arch/arm/mach-mx3/mach-kzm_arm11_01.c

@@ -46,13 +46,18 @@
 
 #include "devices.h"
 
+#define KZM_ARM11_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX31_CS4) ?:					\
+	IMX_IO_ADDRESS(x, MX31_CS5) ?:					\
+	MX31_IO_ADDRESS(x))
+
 #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
 /*
  * KZM-ARM11-01 has an external UART on FPGA
  */
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
 		.mapbase	= KZM_ARM11_16550,
 		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
 		.irqflags	= IRQ_TYPE_EDGE_RISING,
@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
 	/*
 	 * Unmask UART interrupt
 	 */
-	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 	tmp |= 0x2;
-	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+	__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
 
 	return platform_device_register(&serial_device);
 }
@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
 
 static struct resource kzm_smsc9118_resources[] = {
 	{
-		.start	= CS5_BASE_ADDR,
-		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.start	= MX31_CS5_BASE_ADDR,
+		.end	= MX31_CS5_BASE_ADDR + SZ_128K - 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
  */
 static struct map_desc kzm_io_desc[] __initdata = {
 	{
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= CS5_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
-		.length		= CS5_SIZE,
+		.virtual	= MX31_CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length		= MX31_CS5_SIZE,
 		.type		= MT_DEVICE
 	},
 };
@@ -258,8 +263,8 @@ static struct sys_timer kzm_timer = {
  * initialize __mach_desc_KZM_ARM11_01 data structure.
  */
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = kzm_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/mx31pdk.c → arch/arm/mach-mx3/mach-mx31_3ds.c

@@ -211,14 +211,9 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
-		.virtual = CS5_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
-		.length = CS5_SIZE,
+		.virtual = MX31_CS5_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
+		.length = MX31_CS5_SIZE,
 		.type = MT_DEVICE,
 	},
 };
@@ -261,8 +256,8 @@ static struct sys_timer mx31pdk_timer = {
  */
 MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31pdk_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/mx31ads.c → arch/arm/mach-mx3/mach-mx31ads.c

@@ -60,7 +60,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
 		.irq      = EXPIO_INT_XUART_INTA,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags    = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
 	}, {
 		.membase  = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
-		.mapbase  = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
+		.mapbase  = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
 		.irq      = EXPIO_INT_XUART_INTB,
 		.uartclk  = 14745600,
 		.regshift = 0,
@@ -486,14 +486,9 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
-		.virtual	= CS4_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
-		.length		= CS4_SIZE / 2,
+		.virtual	= MX31_CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length		= MX31_CS4_SIZE / 2,
 		.type		= MT_DEVICE
 	},
 };
@@ -538,8 +533,8 @@ static struct sys_timer mx31ads_timer = {
  */
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31ads_map_io,
 	.init_irq       = mx31ads_init_irq,

arch/arm/mach-mx3/mx31lilly.c → arch/arm/mach-mx3/mach-mx31lilly.c

@@ -57,8 +57,8 @@
 
 static struct resource smsc91x_resources[] = {
 	{
-		.start	= CS4_BASE_ADDR,
-		.end	= CS4_BASE_ADDR + 0xffff,
+		.start	= MX31_CS4_BASE_ADDR,
+		.end	= MX31_CS4_BASE_ADDR + 0xffff,
 		.flags	= IORESOURCE_MEM,
 	},
 	{
@@ -195,8 +195,8 @@ static struct sys_timer mx31lilly_timer = {
 };
 
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params	= PHYS_OFFSET + 0x100,
 	.map_io		= mx31_map_io,
 	.init_irq	= mx31_init_irq,

arch/arm/mach-mx3/mx31lite.c → arch/arm/mach-mx3/mach-mx31lite.c

@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS4_BASE_ADDR,
-		.end		= CS4_BASE_ADDR + 0x100,
+		.start		= MX31_CS4_BASE_ADDR,
+		.end		= MX31_CS4_BASE_ADDR + 0x100,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_SFS6),
@@ -135,6 +135,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = {
  * USB
  */
 
+#if defined(CONFIG_USB_ULPI)
 #define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
 			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
 
@@ -180,6 +181,7 @@ static struct mxc_usbh_platform_data usbh2_pdata = {
 	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
 	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
 };
+#endif
 
 /*
  * NOR flash
@@ -212,14 +214,9 @@ static struct platform_device physmap_flash_device = {
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
-		.virtual = CS4_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
-		.length = CS4_SIZE,
+		.virtual = MX31_CS4_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
+		.length = MX31_CS4_SIZE,
 		.type = MT_DEVICE
 	}
 };
@@ -261,11 +258,13 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
 	spi_register_board_info(&mc13783_spi_dev, 1);
 
+#if defined(CONFIG_USB_ULPI)
 	/* USB */
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
 	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
 
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
@@ -288,8 +287,8 @@ struct sys_timer mx31lite_timer = {
 
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31lite_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/mx31moboard.c → arch/arm/mach-mx3/mach-mx31moboard.c

@@ -346,6 +346,8 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
 #define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
 
 static int moboard_usbh2_hw_init(struct platform_device *pdev)
@@ -392,8 +394,11 @@ static int __init moboard_usbh2_init(void)
 	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
 			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
 
-	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
 }
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
 
 
 static struct gpio_led mx31moboard_leds[] = {
@@ -564,8 +569,8 @@ struct sys_timer mx31moboard_timer = {
 
 MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
 	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/mx35pdk.c → arch/arm/mach-mx3/mach-mx35pdk.c

@@ -106,8 +106,8 @@ struct sys_timer mx35pdk_timer = {
 
 MACHINE_START(MX35_3DS, "Freescale MX35PDK")
 	/* Maintainer: Freescale Semiconductor, Inc */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,

arch/arm/mach-mx3/pcm037.c → arch/arm/mach-mx3/mach-pcm037.c

@@ -248,8 +248,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct resource smsc911x_resources[] = {
 	{
-		.start		= CS1_BASE_ADDR + 0x300,
-		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.start		= MX31_CS1_BASE_ADDR + 0x300,
+		.end		= MX31_CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
 		.flags		= IORESOURCE_MEM,
 	}, {
 		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
@@ -281,8 +281,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
 };
 
 static struct resource pcm038_sram_resource = {
-	.start = CS4_BASE_ADDR,
-	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+	.start = MX31_CS4_BASE_ADDR,
+	.end   = MX31_CS4_BASE_ADDR + 512 * 1024 - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -518,8 +536,8 @@ static struct mx3fb_platform_data mx3fb_pdata = {
 
 static struct resource pcm970_sja1000_resources[] = {
 	{
-		.start   = CS5_BASE_ADDR,
-		.end     = CS5_BASE_ADDR + 0x100 - 1,
+		.start   = MX31_CS5_BASE_ADDR,
+		.end     = MX31_CS5_BASE_ADDR + 0x100 - 1,
 		.flags   = IORESOURCE_MEM,
 	}, {
 		.start   = IOMUX_TO_IRQ(IOMUX_PIN(48, 105)),
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
@@ -618,8 +636,8 @@ struct sys_timer pcm037_timer = {
 
 MACHINE_START(PCM037, "Phytec Phycore pcm037")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst	= (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/pcm043.c → arch/arm/mach-mx3/mach-pcm043.c

@@ -248,8 +248,8 @@ struct sys_timer pcm043_timer = {
 
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
 	/* Maintainer: Pengutronix */
-	.phys_io	= AIPS1_BASE_ADDR,
-	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io	= MX35_AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx35_map_io,
 	.init_irq       = mx35_init_irq,

arch/arm/mach-mx3/qong.c → arch/arm/mach-mx3/mach-qong.c

@@ -43,7 +43,7 @@
 #define QONG_FPGA_VERSION(major, minor, rev)	\
 	(((major & 0xF) << 12) | ((minor & 0xF) << 8) | (rev & 0xFF))
 
-#define QONG_FPGA_BASEADDR 		CS1_BASE_ADDR
+#define QONG_FPGA_BASEADDR 		MX31_CS1_BASE_ADDR
 #define QONG_FPGA_PERIPH_SIZE 		(1 << 24)
 
 #define QONG_FPGA_CTRL_BASEADDR		QONG_FPGA_BASEADDR
@@ -115,8 +115,8 @@ static struct physmap_flash_data qong_flash_data = {
 };
 
 static struct resource qong_flash_resource = {
-	.start = CS0_BASE_ADDR,
-	.end = CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
+	.start = MX31_CS0_BASE_ADDR,
+	.end = MX31_CS0_BASE_ADDR + QONG_NOR_SIZE - 1,
 	.flags = IORESOURCE_MEM,
 };
 
@@ -180,8 +180,8 @@ static struct platform_nand_data qong_nand_data = {
 };
 
 static struct resource qong_nand_resource = {
-	.start  	= CS3_BASE_ADDR,
-	.end    	= CS3_BASE_ADDR + SZ_32M - 1,
+	.start  	= MX31_CS3_BASE_ADDR,
+	.end    	= MX31_CS3_BASE_ADDR + SZ_32M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
@@ -198,9 +198,7 @@ static struct platform_device qong_nand_device = {
 static void __init qong_init_nand_mtd(void)
 {
 	/* init CS */
-	__raw_writel(0x00004f00, CSCR_U(3));
-	__raw_writel(0x20013b31, CSCR_L(3));
-	__raw_writel(0x00020800, CSCR_A(3));
+	mx31_setup_weimcs(3, 0x00004f00, 0x20013b31, 0x00020800);
 	mxc_iomux_set_gpr(MUX_SDCTL_CSD1_SEL, true);
 
 	/* enable pin */
@@ -275,8 +273,8 @@ static struct sys_timer qong_timer = {
 
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
 	/* Maintainer: DENX Software Engineering GmbH */
-	.phys_io        = AIPS1_BASE_ADDR,
-	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.phys_io        = MX31_AIPS1_BASE_ADDR,
+	.io_pg_offst    = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx31_map_io,
 	.init_irq       = mx31_init_irq,

arch/arm/mach-mx3/mm.c

@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -179,7 +179,7 @@ static int __init devboard_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -294,7 +294,7 @@ static int __init marxbot_usbh1_init(void)
 
 	usbh1_pdata.otg = otg;
 
-	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
 }
 
 /*

arch/arm/plat-mxc/Makefile

@@ -7,9 +7,13 @@ obj-y := irq.o clock.o gpio.o time.o devices.o cpu.o system.o
 
 obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+CFLAGS_iomux-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
+CFLAGS_dma-mx1-mx2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
 obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
 obj-$(CONFIG_MXC_ULPI) += ulpi.o
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+CFLAGS_audmux-v1.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
 obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
+CFLAGS_audmux-v2.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS

arch/arm/plat-mxc/ehci.c

@@ -43,7 +43,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 	unsigned int v;
 
 	if (cpu_is_mx31()) {
-		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		v = readl(MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 
 		switch (port) {
@@ -79,7 +79,7 @@ int mxc_set_usbcontrol(int port, unsigned int flags)
 			break;
 		}
 
-		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+		writel(v, MX31_IO_ADDRESS(MX31_OTG_BASE_ADDR +
 				     USBCTRL_OTGBASE_OFFSET));
 		return 0;
 	}

arch/arm/plat-mxc/include/mach/board-kzmarm11.h

@@ -21,19 +21,19 @@
 /*
  *  KZM-ARM11-01 Board Control Registers on FPGA
  */
-#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
-#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
-#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
-#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
-#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
-#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
-#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
-#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)
 
 /*
  * External UART for touch panel on FPGA
  */
-#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)
 
 #endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
 

arch/arm/plat-mxc/include/mach/board-mx31ads.h

@@ -14,7 +14,7 @@
 #include <mach/hardware.h>
 
 /* Base address of PBC controller */
-#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+#define PBC_BASE_ADDRESS        MX31_CS4_BASE_ADDR_VIRT
 /* Offsets for the PBC Controller register */
 
 /* PBC Board status register offset */

arch/arm/plat-mxc/include/mach/hardware.h

@@ -22,6 +22,11 @@
 
 #include <asm/sizes.h>
 
+#define IMX_IO_ADDRESS(addr, module)					\
+	((void __force __iomem *)					\
+	 (((unsigned long)((addr) - (module ## _BASE_ADDR)) < module ## _SIZE) ?\
+	 (addr) - (module ## _BASE_ADDR) + (module ## _BASE_ADDR_VIRT) : 0))
+
 #ifdef CONFIG_ARCH_MX3
 #include <mach/mx3x.h>
 #include <mach/mx31.h>

arch/arm/plat-mxc/include/mach/iomux-mx25.h

@@ -58,19 +58,19 @@
 
 #define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
 #define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
 
 #define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
 #define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
 #define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
 #define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
 #define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
 
@@ -418,23 +418,23 @@
 #define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
 

arch/arm/plat-mxc/include/mach/mx1.h

@@ -9,8 +9,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX1_H__
-#define __ASM_ARCH_MXC_MX1_H__
+#ifndef __MACH_MX1_H__
+#define __MACH_MX1_H__
 
 #include <mach/vmalloc.h>
 
@@ -161,4 +161,4 @@
 #define DMA_REQ_UART1_T		30
 #define DMA_REQ_UART1_R		31
 
-#endif /*  __ASM_ARCH_MXC_MX1_H__ */
+#endif /* ifndef __MACH_MX1_H__ */

arch/arm/plat-mxc/include/mach/mx21.h

@@ -22,8 +22,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX21_H__
-#define __ASM_ARCH_MXC_MX21_H__
+#ifndef __MACH_MX21_H__
+#define __MACH_MX21_H__
 
 #define MX21_AIPI_BASE_ADDR		0x10000000
 #define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -92,6 +92,11 @@
 
 #define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
+#define MX21_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX21_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX21_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX21_X_MEMC))
+
 /* fixed interrupt numbers */
 #define MX21_INT_CSPI3		6
 #define MX21_INT_GPIO		8
@@ -179,6 +184,7 @@
 #define MX21_DMA_REQ_CSI_STAT	30
 #define MX21_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
 #define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
@@ -211,5 +217,6 @@
 #define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
 #define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
 #define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX21_H__ */
+#endif /* ifndef __MACH_MX21_H__ */

arch/arm/plat-mxc/include/mach/mx25.h

@@ -22,23 +22,16 @@
 #define MX25_GPIO3_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0xa4000)
 #define MX25_GPIO4_BASE_ADDR_VIRT	(MX25_AIPS2_BASE_ADDR_VIRT + 0x9c000)
 
-#define MX25_AIPS1_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS1_BASE_ADDR) + MX25_AIPS1_BASE_ADDR_VIRT)
-#define MX25_AIPS2_IO_ADDRESS(x)  \
-	(((x) - MX25_AIPS2_BASE_ADDR) + MX25_AIPS2_BASE_ADDR_VIRT)
-#define MX25_AVIC_IO_ADDRESS(x)  \
-	(((x) - MX25_AVIC_BASE_ADDR) + MX25_AVIC_BASE_ADDR_VIRT)
-
-#define __in_range(addr, name)	((addr) >= name##_BASE_ADDR && (addr) < name##_BASE_ADDR + name##_SIZE)
-
-#define MX25_IO_ADDRESS(x)					\
-	(void __force __iomem *)				\
-	(__in_range(x, MX25_AIPS1) ? MX25_AIPS1_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AIPS2) ? MX25_AIPS2_IO_ADDRESS(x) :	\
-	__in_range(x, MX25_AVIC) ? MX25_AVIC_IO_ADDRESS(x) :	\
-	0xDEADBEEF)
+#define MX25_IO_ADDRESS(x) (					\
+	IMX_IO_ADDRESS(x, MX25_AIPS1) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AIPS2) ?:			\
+	IMX_IO_ADDRESS(x, MX25_AVIC))
 
 #define UART1_BASE_ADDR			0x43f90000
 #define UART2_BASE_ADDR			0x43f94000
 
-#endif /* __MACH_MX25_H__ */
+#define MX25_FEC_BASE_ADDR		0x50038000
+
+#define MX25_INT_FEC	57
+
+#endif /* ifndef __MACH_MX25_H__ */

arch/arm/plat-mxc/include/mach/mx27.h

@@ -21,8 +21,12 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX27_H__
-#define __ASM_ARCH_MXC_MX27_H__
+#ifndef __MACH_MX27_H__
+#define __MACH_MX27_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
 
 #define MX27_AIPI_BASE_ADDR		0x10000000
 #define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
@@ -109,11 +113,31 @@
 #define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
 #define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
+#define MX27_WEIM_CSCRx_BASE_ADDR(cs)	(MX27_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX27_WEIM_CSCRxU(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX27_WEIM_CSCRxL(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX27_WEIM_CSCRxA(cs)			(MX27_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
 
 /* IRAM */
 #define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
+#define MX27_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX27_AIPI) ?:					\
+	IMX_IO_ADDRESS(x, MX27_SAHB1) ?:				\
+	IMX_IO_ADDRESS(x, MX27_X_MEMC))
+
+#ifndef __ASSEMBLER__
+static inline void mx27_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX27_IO_ADDRESS(MX27_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX27_IO_ADDRESS(MX27_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX27_IO_ADDRESS(MX27_WEIM_CSCRxA(cs)));
+}
+#endif
+
 /* fixed interrupt numbers */
 #define MX27_INT_I2C2		1
 #define MX27_INT_GPT6		2
@@ -225,6 +249,7 @@
 extern int mx27_revision(void);
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
 #define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
@@ -292,5 +317,6 @@ extern int mx27_revision(void);
 #define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
 #define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
 #define DMA_REQ_NFC MX27_DMA_REQ_NFC
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX27_H__ */
+#endif /* ifndef __MACH_MX27_H__ */

arch/arm/plat-mxc/include/mach/mx2x.h

@@ -20,8 +20,8 @@
  * MA  02110-1301, USA.
  */
 
-#ifndef __ASM_ARCH_MXC_MX2x_H__
-#define __ASM_ARCH_MXC_MX2x_H__
+#ifndef __MACH_MX2x_H__
+#define __MACH_MX2x_H__
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
@@ -176,6 +176,7 @@
 #define MX2x_DMA_REQ_CSI_STAT	30
 #define MX2x_DMA_REQ_CSI_RX	31
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
 #define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
@@ -287,5 +288,6 @@
 #define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
 #define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
 #define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
+#endif
 
-#endif /* __ASM_ARCH_MXC_MX2x_H__ */
+#endif /* ifndef __MACH_MX2x_H__ */

arch/arm/plat-mxc/include/mach/mx31.h

@@ -1,3 +1,10 @@
+#ifndef __MACH_MX31_H__
+#define __MACH_MX31_H__
+
+#ifndef __ASSEMBLER__
+#include <linux/io.h>
+#endif
+
 /*
  * IRAM
  */
@@ -107,8 +114,30 @@
 #define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
 #define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
 
+#define MX31_WEIM_CSCRx_BASE_ADDR(cs)	(MX31_WEIM_BASE_ADDR + (cs) * 0x10)
+#define MX31_WEIM_CSCRxU(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs))
+#define MX31_WEIM_CSCRxL(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x4)
+#define MX31_WEIM_CSCRxA(cs)			(MX31_WEIM_CSCRx_BASE_ADDR(cs) + 0x8)
+
 #define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX31_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX31_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX31_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX31_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX31_SPBA0))
+
+#ifndef __ASSEMBLER__
+static inline void mx31_setup_weimcs(size_t cs,
+		unsigned upper, unsigned lower, unsigned addional)
+{
+	__raw_writel(upper, MX31_IO_ADDRESS(MX31_WEIM_CSCRxU(cs)));
+	__raw_writel(lower, MX31_IO_ADDRESS(MX31_WEIM_CSCRxL(cs)));
+	__raw_writel(addional, MX31_IO_ADDRESS(MX31_WEIM_CSCRxA(cs)));
+}
+#endif
+
 #define MX31_INT_I2C3		3
 #define MX31_INT_I2C2		4
 #define MX31_INT_MPEG4_ENCODER	5
@@ -186,6 +215,7 @@
 #define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
 #define MX31_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
 #define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
@@ -216,3 +246,6 @@
 #define MXC_INT_UART5 MX31_INT_UART5
 #define MXC_INT_CCM MX31_INT_CCM
 #define MXC_INT_PCMCIA MX31_INT_PCMCIA
+#endif
+
+#endif /* ifndef __MACH_MX31_H__ */

arch/arm/plat-mxc/include/mach/mx35.h

@@ -1,3 +1,5 @@
+#ifndef __MACH_MX35_H__
+#define __MACH_MX35_H__
 /*
  * IRAM
  */
@@ -104,6 +106,13 @@
 #define MX35_NFC_BASE_ADDR		0xbb000000
 #define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
+#define MX35_IO_ADDRESS(x) (						\
+	IMX_IO_ADDRESS(x, MX35_AIPS1) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AIPS2) ?:				\
+	IMX_IO_ADDRESS(x, MX35_AVIC) ?:					\
+	IMX_IO_ADDRESS(x, MX35_X_MEMC) ?:				\
+	IMX_IO_ADDRESS(x, MX35_SPBA0))
+
 /*
  * Interrupt numbers
  */
@@ -180,6 +189,7 @@
 #define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
 #define MX35_SYSTEM_REV_NUM		3
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
 #define MXC_INT_OWIRE MX35_INT_OWIRE
@@ -195,3 +205,6 @@
 #define MXC_INT_MLB MX35_INT_MLB
 #define MXC_INT_SPDIF MX35_INT_SPDIF
 #define MXC_INT_FEC MX35_INT_FEC
+#endif
+
+#endif /* ifndef __MACH_MX35_H__ */

arch/arm/plat-mxc/include/mach/mx3x.h

@@ -8,8 +8,8 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ASM_ARCH_MXC_MX31_H__
-#define __ASM_ARCH_MXC_MX31_H__
+#ifndef __MACH_MX3x_H__
+#define __MACH_MX3x_H__
 
 /*
  * MX31 memory map:
@@ -269,6 +269,7 @@ static inline int mx31_revision(void)
 }
 #endif
 
+#ifdef IMX_NEEDS_DEPRECATED_SYMBOLS
 /* these should go away */
 #define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
 #define L2CC_SIZE MX3x_L2CC_SIZE
@@ -401,5 +402,6 @@ static inline int mx31_revision(void)
 #define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
 #define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
 #define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
+#endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+#endif /* ifndef __MACH_MX3x_H__ */

arch/arm/plat-mxc/include/mach/mxc.h

@@ -121,9 +121,10 @@ extern unsigned int __mxc_cpu_type;
 #endif
 
 #if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX2)
-#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10)
-#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x4)
-#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR) + n * 0x10 + 0x8)
+/* These are deprecated, use mx[23][157]_setup_weimcs instead. */
+#define CSCR_U(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10))
+#define CSCR_L(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x4))
+#define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8))
 #endif
 
 #define cpu_is_mx3()	(cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231())

arch/arm/plat-mxc/include/mach/uncompress.h

@@ -1,8 +1,6 @@
 /*
  *  arch/arm/plat-mxc/include/mach/uncompress.h
  *
- *
- *
  *  Copyright (C) 1999 ARM Limited
  *  Copyright (C) Shane Nay (shane@minirl.com)
  *
@@ -25,7 +23,6 @@
 
 #define __MXC_BOOT_UNCOMPRESS
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static unsigned long uart_base;