Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - StrongARM SA1111 updates to modernise and remove cruft

 - Add StrongARM gpio drivers for board GPIOs

 - Verify size of zImage is what we expect to avoid issues with
   appended DTB

 - nommu updates from Vladimir Murzin

 - page table read-write-execute checking from Jinbum Park

 - Broadcom Brahma-B15 cache updates from Florian Fainelli

 - Avoid failure with kprobes test caused by inappropriately
   placed kprobes

 - Remove __memzero optimisation (which was incorrectly being
   used directly by some drivers)

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (32 commits)
  ARM: 8745/1: get rid of __memzero()
  ARM: 8744/1: don't discard memblock for kexec
  ARM: 8743/1: bL_switcher: add MODULE_LICENSE tag
  ARM: 8742/1: Always use REFCOUNT_FULL
  ARM: 8741/1: B15: fix unused label warnings
  ARM: 8740/1: NOMMU: Make sure we do not hold stale data in mem[] array
  ARM: 8739/1: NOMMU: Setup VBAR/Hivecs for secondaries cores
  ARM: 8738/1: Disable CONFIG_DEBUG_VIRTUAL for NOMMU
  ARM: 8737/1: mm: dump: add checking for writable and executable
  ARM: 8736/1: mm: dump: make the page table dumping seq_file
  ARM: 8735/1: mm: dump: make page table dumping reusable
  ARM: sa1100/neponset: add GPIO drivers for control and modem registers
  ARM: sa1100/assabet: add BCR/BSR GPIO driver
  ARM: 8734/1: mm: idmap: Mark variables as ro_after_init
  ARM: 8733/1: hw_breakpoint: Mark variables as __ro_after_init
  ARM: 8732/1: NOMMU: Allow userspace to access background MPU region
  ARM: 8727/1: MAINTAINERS: Update brcmstb entries to cover B15 code
  ARM: 8728/1: B15: Register reboot notifier for KEXEC
  ARM: 8730/1: B15: Add suspend/resume hooks
  ARM: 8726/1: B15: Add CPU hotplug awareness
  ...

MAINTAINERS

@@ -2855,6 +2855,8 @@ S:	Maintained
 F:	arch/arm/mach-bcm/*brcmstb*
 F:	arch/arm/boot/dts/bcm7*.dts*
 F:	drivers/bus/brcmstb_gisb.c
+F:	arch/arm/mm/cache-b15-rac.c
+F:	arch/arm/include/asm/hardware/cache-b15-rac.h
 N:	brcmstb
 
 BROADCOM BMIPS CPUFREQ DRIVER

arch/arm/Kconfig

@@ -3,8 +3,8 @@ config ARM
 	bool
 	default y
 	select ARCH_CLOCKSOURCE_DATA
-	select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID
-	select ARCH_HAS_DEBUG_VIRTUAL
+	select ARCH_DISCARD_MEMBLOCK if !HAVE_ARCH_PFN_VALID && !KEXEC
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_SET_MEMORY
@@ -100,6 +100,7 @@ config ARM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select PERF_USE_VMALLOC
+	select REFCOUNT_FULL
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	# Above selects are sorted alphabetically; please add new ones
@@ -1526,12 +1527,10 @@ config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
-	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
 	help
 	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
+	  Thumb-2 mode.
 
 	  If unsure, say N.
 
@@ -1566,9 +1565,6 @@ config THUMB2_AVOID_R_ARM_THM_JUMP11
 
 	  Unless you are sure your tools don't have this problem, say Y.
 
-config ARM_ASM_UNIFIED
-	bool
-
 config ARM_PATCH_IDIV
 	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
 	depends on CPU_32v7 && !XIP_KERNEL

arch/arm/Kconfig.debug

@@ -3,10 +3,14 @@ menu "Kernel hacking"
 
 source "lib/Kconfig.debug"
 
-config ARM_PTDUMP
+config ARM_PTDUMP_CORE
+	def_bool n
+
+config ARM_PTDUMP_DEBUGFS
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	depends on MMU
+	select ARM_PTDUMP_CORE
 	select DEBUG_FS
 	---help---
 	  Say Y here if you want to show the kernel pagetable layout in a
@@ -16,6 +20,33 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
+config DEBUG_WX
+	bool "Warn on W+X mappings at boot"
+	select ARM_PTDUMP_CORE
+	---help---
+		Generate a warning if any W+X mappings are found at boot.
+
+		This is useful for discovering cases where the kernel is leaving
+		W+X mappings after applying NX, as such mappings are a security risk.
+
+		Look for a message in dmesg output like this:
+
+			arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+		or like this, if the check failed:
+
+			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+		Note that even if the check fails, your kernel is possibly
+		still fine, as W+X mappings are not a security hole in
+		themselves, what they do is that they make the exploitation
+		of other unfixed kernel bugs easier.
+
+		There is no runtime or memory usage effect of this option
+		once the kernel has booted up - it's a one time check.
+
+		If in doubt, say "Y".
+
 # RMK wants arm kernels compiled with frame pointers or stack unwinding.
 # If you know what you are doing and are willing to live without stack
 # traces, you can get a slightly smaller kernel by setting this option to

arch/arm/Makefile

@@ -115,9 +115,11 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
+# Accept old syntax despite ".syntax unified"
+AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
+
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
 AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
-AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
 # Work around buggy relocation from gas if requested:
@@ -125,7 +127,7 @@ ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
 KBUILD_CFLAGS_MODULE	+=-fno-optimize-sibling-calls
 endif
 else
-CFLAGS_ISA	:=$(call cc-option,-marm,)
+CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 

arch/arm/boot/compressed/string.c

@@ -130,8 +130,3 @@ void *memset(void *s, int c, size_t count)
 		*xs++ = c;
 	return s;
 }
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}

arch/arm/boot/compressed/vmlinux.lds.S

@@ -56,6 +56,7 @@ SECTIONS
   .rodata : {
     *(.rodata)
     *(.rodata.*)
+    *(.data.rel.ro)
   }
   .piggydata : {
     *(.piggydata)
@@ -101,6 +102,12 @@ SECTIONS
    * this symbol allows further debug in the near future.
    */
   .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
     _edata_real = .;
   }
 
@@ -128,3 +135,4 @@ SECTIONS
   .stab.indexstr 0	: { *(.stab.indexstr) }
   .comment 0		: { *(.comment) }
 }
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");

arch/arm/common/bL_switcher_dummy_if.c

@@ -57,3 +57,7 @@ static struct miscdevice bL_switcher_device = {
 	&bL_switcher_fops
 };
 module_misc_device(bL_switcher_device);
+
+MODULE_AUTHOR("Nicolas Pitre <nico@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("big.LITTLE switcher dummy user interface");

arch/arm/common/sa1111.c

@@ -108,6 +108,7 @@ struct sa1111 {
 	spinlock_t	lock;
 	void __iomem	*base;
 	struct sa1111_platform_data *pdata;
+	struct irq_domain *irqdomain;
 	struct gpio_chip gc;
 #ifdef CONFIG_PM
 	void		*saved_state;
@@ -125,7 +126,7 @@ struct sa1111_dev_info {
 	unsigned long	skpcr_mask;
 	bool		dma;
 	unsigned int	devid;
-	unsigned int	irq[6];
+	unsigned int	hwirq[6];
 };
 
 static struct sa1111_dev_info sa1111_devices[] = {
@@ -134,7 +135,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 		.skpcr_mask	= SKPCR_UCLKEN,
 		.dma		= true,
 		.devid		= SA1111_DEVID_USB,
-		.irq = {
+		.hwirq = {
 			IRQ_USBPWR,
 			IRQ_HCIM,
 			IRQ_HCIBUFFACC,
@@ -148,7 +149,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
 		.dma		= true,
 		.devid		= SA1111_DEVID_SAC,
-		.irq = {
+		.hwirq = {
 			AUDXMTDMADONEA,
 			AUDXMTDMADONEB,
 			AUDRCVDMADONEA,
@@ -164,7 +165,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 		.offset		= SA1111_KBD,
 		.skpcr_mask	= SKPCR_PTCLKEN,
 		.devid		= SA1111_DEVID_PS2_KBD,
-		.irq = {
+		.hwirq = {
 			IRQ_TPRXINT,
 			IRQ_TPTXINT
 		},
@@ -173,7 +174,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 		.offset		= SA1111_MSE,
 		.skpcr_mask	= SKPCR_PMCLKEN,
 		.devid		= SA1111_DEVID_PS2_MSE,
-		.irq = {
+		.hwirq = {
 			IRQ_MSRXINT,
 			IRQ_MSTXINT
 		},
@@ -182,7 +183,7 @@ static struct sa1111_dev_info sa1111_devices[] = {
 		.offset		= 0x1800,
 		.skpcr_mask	= 0,
 		.devid		= SA1111_DEVID_PCMCIA,
-		.irq = {
+		.hwirq = {
 			IRQ_S0_READY_NINT,
 			IRQ_S0_CD_VALID,
 			IRQ_S0_BVD1_STSCHG,
@@ -193,6 +194,19 @@ static struct sa1111_dev_info sa1111_devices[] = {
 	},
 };
 
+static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
+{
+	return irq_create_mapping(sachip->irqdomain, hwirq);
+}
+
+static void sa1111_handle_irqdomain(struct irq_domain *irqdomain, int irq)
+{
+	struct irq_desc *d = irq_to_desc(irq_linear_revmap(irqdomain, irq));
+
+	if (d)
+		generic_handle_irq_desc(d);
+}
+
 /*
  * SA1111 interrupt support.  Since clearing an IRQ while there are
  * active IRQs causes the interrupt output to pulse, the upper levels
@@ -202,49 +216,45 @@ static void sa1111_irq_handler(struct irq_desc *desc)
 {
 	unsigned int stat0, stat1, i;
 	struct sa1111 *sachip = irq_desc_get_handler_data(desc);
+	struct irq_domain *irqdomain;
 	void __iomem *mapbase = sachip->base + SA1111_INTC;
 
-	stat0 = sa1111_readl(mapbase + SA1111_INTSTATCLR0);
-	stat1 = sa1111_readl(mapbase + SA1111_INTSTATCLR1);
+	stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
+	stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
 
-	sa1111_writel(stat0, mapbase + SA1111_INTSTATCLR0);
+	writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
 
 	desc->irq_data.chip->irq_ack(&desc->irq_data);
 
-	sa1111_writel(stat1, mapbase + SA1111_INTSTATCLR1);
+	writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
 
 	if (stat0 == 0 && stat1 == 0) {
 		do_bad_IRQ(desc);
 		return;
 	}
 
+	irqdomain = sachip->irqdomain;
+
 	for (i = 0; stat0; i++, stat0 >>= 1)
 		if (stat0 & 1)
-			generic_handle_irq(i + sachip->irq_base);
+			sa1111_handle_irqdomain(irqdomain, i);
 
 	for (i = 32; stat1; i++, stat1 >>= 1)
 		if (stat1 & 1)
-			generic_handle_irq(i + sachip->irq_base);
+			sa1111_handle_irqdomain(irqdomain, i);
 
 	/* For level-based interrupts */
 	desc->irq_data.chip->irq_unmask(&desc->irq_data);
 }
 
-#define SA1111_IRQMASK_LO(x)	(1 << (x - sachip->irq_base))
-#define SA1111_IRQMASK_HI(x)	(1 << (x - sachip->irq_base - 32))
-
 static u32 sa1111_irqmask(struct irq_data *d)
 {
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-
-	return BIT((d->irq - sachip->irq_base) & 31);
+	return BIT(irqd_to_hwirq(d) & 31);
 }
 
 static int sa1111_irqbank(struct irq_data *d)
 {
-	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
-
-	return ((d->irq - sachip->irq_base) / 32) * 4;
+	return (irqd_to_hwirq(d) / 32) * 4;
 }
 
 static void sa1111_ack_irq(struct irq_data *d)
@@ -257,9 +267,9 @@ static void sa1111_mask_irq(struct irq_data *d)
 	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 	u32 ie;
 
-	ie = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie = readl_relaxed(mapbase + SA1111_INTEN0);
 	ie &= ~sa1111_irqmask(d);
-	sa1111_writel(ie, mapbase + SA1111_INTEN0);
+	writel(ie, mapbase + SA1111_INTEN0);
 }
 
 static void sa1111_unmask_irq(struct irq_data *d)
@@ -268,9 +278,9 @@ static void sa1111_unmask_irq(struct irq_data *d)
 	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 	u32 ie;
 
-	ie = sa1111_readl(mapbase + SA1111_INTEN0);
+	ie = readl_relaxed(mapbase + SA1111_INTEN0);
 	ie |= sa1111_irqmask(d);
-	sa1111_writel(ie, mapbase + SA1111_INTEN0);
+	writel_relaxed(ie, mapbase + SA1111_INTEN0);
 }
 
 /*
@@ -287,11 +297,11 @@ static int sa1111_retrigger_irq(struct irq_data *d)
 	u32 ip, mask = sa1111_irqmask(d);
 	int i;
 
-	ip = sa1111_readl(mapbase + SA1111_INTPOL0);
+	ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 	for (i = 0; i < 8; i++) {
-		sa1111_writel(ip ^ mask, mapbase + SA1111_INTPOL0);
-		sa1111_writel(ip, mapbase + SA1111_INTPOL0);
-		if (sa1111_readl(mapbase + SA1111_INTSTATCLR0) & mask)
+		writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
+		writel_relaxed(ip, mapbase + SA1111_INTPOL0);
+		if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
 			break;
 	}
 
@@ -313,13 +323,13 @@ static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
 	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
-	ip = sa1111_readl(mapbase + SA1111_INTPOL0);
+	ip = readl_relaxed(mapbase + SA1111_INTPOL0);
 	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip &= ~mask;
 	else
 		ip |= mask;
-	sa1111_writel(ip, mapbase + SA1111_INTPOL0);
-	sa1111_writel(ip, mapbase + SA1111_WAKEPOL0);
+	writel_relaxed(ip, mapbase + SA1111_INTPOL0);
+	writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
 
 	return 0;
 }
@@ -330,12 +340,12 @@ static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
 	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
 	u32 we, mask = sa1111_irqmask(d);
 
-	we = sa1111_readl(mapbase + SA1111_WAKEEN0);
+	we = readl_relaxed(mapbase + SA1111_WAKEEN0);
 	if (on)
 		we |= mask;
 	else
 		we &= ~mask;
-	sa1111_writel(we, mapbase + SA1111_WAKEEN0);
+	writel_relaxed(we, mapbase + SA1111_WAKEEN0);
 
 	return 0;
 }
@@ -350,10 +360,30 @@ static struct irq_chip sa1111_irq_chip = {
 	.irq_set_wake	= sa1111_wake_irq,
 };
 
+static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
+	irq_hw_number_t hwirq)
+{
+	struct sa1111 *sachip = d->host_data;
+
+	/* Disallow unavailable interrupts */
+	if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
+		return -EINVAL;
+
+	irq_set_chip_data(irq, sachip);
+	irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
+	irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sa1111_irqdomain_ops = {
+	.map = sa1111_irqdomain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
 static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 {
 	void __iomem *irqbase = sachip->base + SA1111_INTC;
-	unsigned i, irq;
 	int ret;
 
 	/*
@@ -373,38 +403,40 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 	sachip->irq_base = ret;
 
 	/* disable all IRQs */
-	sa1111_writel(0, irqbase + SA1111_INTEN0);
-	sa1111_writel(0, irqbase + SA1111_INTEN1);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+	writel_relaxed(0, irqbase + SA1111_INTEN0);
+	writel_relaxed(0, irqbase + SA1111_INTEN1);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN0);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 
 	/*
 	 * detect on rising edge.  Note: Feb 2001 Errata for SA1111
 	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
 	 */
-	sa1111_writel(0, irqbase + SA1111_INTPOL0);
-	sa1111_writel(BIT(IRQ_S0_READY_NINT & 31) |
-		      BIT(IRQ_S1_READY_NINT & 31),
-		      irqbase + SA1111_INTPOL1);
+	writel_relaxed(0, irqbase + SA1111_INTPOL0);
+	writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
+		       BIT(IRQ_S1_READY_NINT & 31),
+		       irqbase + SA1111_INTPOL1);
 
 	/* clear all IRQs */
-	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR0);
-	sa1111_writel(~0, irqbase + SA1111_INTSTATCLR1);
-
-	for (i = IRQ_GPAIN0; i <= SSPROR; i++) {
-		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
-		irq_set_chip_data(irq, sachip);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
-	}
+	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
+	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
 
-	for (i = AUDXMTDMADONEA; i <= IRQ_S1_BVD1_STSCHG; i++) {
-		irq = sachip->irq_base + i;
-		irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
-		irq_set_chip_data(irq, sachip);
-		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+	sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
+						  &sa1111_irqdomain_ops,
+						  sachip);
+	if (!sachip->irqdomain) {
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
+		return -ENOMEM;
 	}
 
+	irq_domain_associate_many(sachip->irqdomain,
+				  sachip->irq_base + IRQ_GPAIN0,
+				  IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
+	irq_domain_associate_many(sachip->irqdomain,
+				  sachip->irq_base + AUDXMTDMADONEA,
+				  AUDXMTDMADONEA,
+				  IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
+
 	/*
 	 * Register SA1111 interrupt
 	 */
@@ -420,20 +452,22 @@ static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
 
 static void sa1111_remove_irq(struct sa1111 *sachip)
 {
+	struct irq_domain *domain = sachip->irqdomain;
 	void __iomem *irqbase = sachip->base + SA1111_INTC;
+	int i;
 
 	/* disable all IRQs */
-	sa1111_writel(0, irqbase + SA1111_INTEN0);
-	sa1111_writel(0, irqbase + SA1111_INTEN1);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN0);
-	sa1111_writel(0, irqbase + SA1111_WAKEEN1);
+	writel_relaxed(0, irqbase + SA1111_INTEN0);
+	writel_relaxed(0, irqbase + SA1111_INTEN1);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN0);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN1);
 
-	if (sachip->irq != NO_IRQ) {
-		irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
-		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
+	irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
+	for (i = 0; i < SA1111_IRQ_NR; i++)
+		irq_dispose_mapping(irq_find_mapping(domain, i));
+	irq_domain_remove(domain);
 
-		release_mem_region(sachip->phys + SA1111_INTC, 512);
-	}
+	release_mem_region(sachip->phys + SA1111_INTC, 512);
 }
 
 enum {
@@ -572,7 +606,7 @@ static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct sa1111 *sachip = gc_to_sa1111(gc);
 
-	return sachip->irq_base + offset;
+	return sa1111_map_irq(sachip, offset);
 }
 
 static int sa1111_setup_gpios(struct sa1111 *sachip)
@@ -618,11 +652,11 @@ static void sa1111_wake(struct sa1111 *sachip)
 	/*
 	 * Turn VCO on, and disable PLL Bypass.
 	 */
-	r = sa1111_readl(sachip->base + SA1111_SKCR);
+	r = readl_relaxed(sachip->base + SA1111_SKCR);
 	r &= ~SKCR_VCO_OFF;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
 	r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
 
 	/*
 	 * Wait lock time.  SA1111 manual _doesn't_
@@ -634,7 +668,7 @@ static void sa1111_wake(struct sa1111 *sachip)
 	 * Enable RCLK.  We also ensure that RDYEN is set.
 	 */
 	r |= SKCR_RCLKEN | SKCR_RDYEN;
-	sa1111_writel(r, sachip->base + SA1111_SKCR);
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
 
 	/*
 	 * Wait 14 RCLK cycles for the chip to finish coming out
@@ -645,7 +679,7 @@ static void sa1111_wake(struct sa1111 *sachip)
 	/*
 	 * Ensure all clocks are initially off.
 	 */
-	sa1111_writel(0, sachip->base + SA1111_SKPCR);
+	writel_relaxed(0, sachip->base + SA1111_SKPCR);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
@@ -675,7 +709,7 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
 	if (cas_latency == 3)
 		smcr |= SMCR_CLAT;
 
-	sa1111_writel(smcr, sachip->base + SA1111_SMCR);
+	writel_relaxed(smcr, sachip->base + SA1111_SMCR);
 
 	/*
 	 * Now clear the bits in the DMA mask to work around the SA1111
@@ -723,8 +757,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
 
-	for (i = 0; i < ARRAY_SIZE(info->irq); i++)
-		dev->irq[i] = sachip->irq_base + info->irq[i];
+	for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
+		dev->hwirq[i] = info->hwirq[i];
 
 	/*
 	 * If the parent device has a DMA mask associated with it, and
@@ -814,7 +848,7 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	/*
 	 * Probe for the chip.  Only touch the SBI registers.
 	 */
-	id = sa1111_readl(sachip->base + SA1111_SKID);
+	id = readl_relaxed(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
 		ret = -ENODEV;
@@ -833,11 +867,9 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 * The interrupt controller must be initialised before any
 	 * other device to ensure that the interrupts are available.
 	 */
-	if (sachip->irq != NO_IRQ) {
-		ret = sa1111_setup_irq(sachip, pd->irq_base);
-		if (ret)
-			goto err_clk;
-	}
+	ret = sa1111_setup_irq(sachip, pd->irq_base);
+	if (ret)
+		goto err_clk;
 
 	/* Setup the GPIOs - should really be done after the IRQ setup */
 	ret = sa1111_setup_gpios(sachip);
@@ -864,8 +896,8 @@ static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 * DMA.  It can otherwise be held firmly in the off position.
 	 * (currently, we always enable it.)
 	 */
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
+	val = readl_relaxed(sachip->base + SA1111_SKPCR);
+	writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
 
 	/*
 	 * Enable the SA1110 memory bus request and grant signals.
@@ -962,31 +994,31 @@ static int sa1111_suspend_noirq(struct device *dev)
 	 * Save state.
 	 */
 	base = sachip->base;
-	save->skcr     = sa1111_readl(base + SA1111_SKCR);
-	save->skpcr    = sa1111_readl(base + SA1111_SKPCR);
-	save->skcdr    = sa1111_readl(base + SA1111_SKCDR);
-	save->skaud    = sa1111_readl(base + SA1111_SKAUD);
-	save->skpwm0   = sa1111_readl(base + SA1111_SKPWM0);
-	save->skpwm1   = sa1111_readl(base + SA1111_SKPWM1);
+	save->skcr     = readl_relaxed(base + SA1111_SKCR);
+	save->skpcr    = readl_relaxed(base + SA1111_SKPCR);
+	save->skcdr    = readl_relaxed(base + SA1111_SKCDR);
+	save->skaud    = readl_relaxed(base + SA1111_SKAUD);
+	save->skpwm0   = readl_relaxed(base + SA1111_SKPWM0);
+	save->skpwm1   = readl_relaxed(base + SA1111_SKPWM1);
 
-	sa1111_writel(0, sachip->base + SA1111_SKPWM0);
-	sa1111_writel(0, sachip->base + SA1111_SKPWM1);
+	writel_relaxed(0, sachip->base + SA1111_SKPWM0);
+	writel_relaxed(0, sachip->base + SA1111_SKPWM1);
 
 	base = sachip->base + SA1111_INTC;
-	save->intpol0  = sa1111_readl(base + SA1111_INTPOL0);
-	save->intpol1  = sa1111_readl(base + SA1111_INTPOL1);
-	save->inten0   = sa1111_readl(base + SA1111_INTEN0);
-	save->inten1   = sa1111_readl(base + SA1111_INTEN1);
-	save->wakepol0 = sa1111_readl(base + SA1111_WAKEPOL0);
-	save->wakepol1 = sa1111_readl(base + SA1111_WAKEPOL1);
-	save->wakeen0  = sa1111_readl(base + SA1111_WAKEEN0);
-	save->wakeen1  = sa1111_readl(base + SA1111_WAKEEN1);
+	save->intpol0  = readl_relaxed(base + SA1111_INTPOL0);
+	save->intpol1  = readl_relaxed(base + SA1111_INTPOL1);
+	save->inten0   = readl_relaxed(base + SA1111_INTEN0);
+	save->inten1   = readl_relaxed(base + SA1111_INTEN1);
+	save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
+	save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
+	save->wakeen0  = readl_relaxed(base + SA1111_WAKEEN0);
+	save->wakeen1  = readl_relaxed(base + SA1111_WAKEEN1);
 
 	/*
 	 * Disable.
 	 */
-	val = sa1111_readl(sachip->base + SA1111_SKCR);
-	sa1111_writel(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
+	val = readl_relaxed(sachip->base + SA1111_SKCR);
+	writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
 
 	clk_disable(sachip->clk);
 
@@ -1023,7 +1055,7 @@ static int sa1111_resume_noirq(struct device *dev)
 	 * Ensure that the SA1111 is still here.
 	 * FIXME: shouldn't do this here.
 	 */
-	id = sa1111_readl(sachip->base + SA1111_SKID);
+	id = readl_relaxed(sachip->base + SA1111_SKID);
 	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
 		__sa1111_remove(sachip);
 		dev_set_drvdata(dev, NULL);
@@ -1047,26 +1079,26 @@ static int sa1111_resume_noirq(struct device *dev)
 	 */
 	spin_lock_irqsave(&sachip->lock, flags);
 
-	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
-	sa1111_writel(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
+	writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
+	writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
 
 	base = sachip->base;
-	sa1111_writel(save->skcr,     base + SA1111_SKCR);
-	sa1111_writel(save->skpcr,    base + SA1111_SKPCR);
-	sa1111_writel(save->skcdr,    base + SA1111_SKCDR);
-	sa1111_writel(save->skaud,    base + SA1111_SKAUD);
-	sa1111_writel(save->skpwm0,   base + SA1111_SKPWM0);
-	sa1111_writel(save->skpwm1,   base + SA1111_SKPWM1);
+	writel_relaxed(save->skcr,     base + SA1111_SKCR);
+	writel_relaxed(save->skpcr,    base + SA1111_SKPCR);
+	writel_relaxed(save->skcdr,    base + SA1111_SKCDR);
+	writel_relaxed(save->skaud,    base + SA1111_SKAUD);
+	writel_relaxed(save->skpwm0,   base + SA1111_SKPWM0);
+	writel_relaxed(save->skpwm1,   base + SA1111_SKPWM1);
 
 	base = sachip->base + SA1111_INTC;
-	sa1111_writel(save->intpol0,  base + SA1111_INTPOL0);
-	sa1111_writel(save->intpol1,  base + SA1111_INTPOL1);
-	sa1111_writel(save->inten0,   base + SA1111_INTEN0);
-	sa1111_writel(save->inten1,   base + SA1111_INTEN1);
-	sa1111_writel(save->wakepol0, base + SA1111_WAKEPOL0);
-	sa1111_writel(save->wakepol1, base + SA1111_WAKEPOL1);
-	sa1111_writel(save->wakeen0,  base + SA1111_WAKEEN0);
-	sa1111_writel(save->wakeen1,  base + SA1111_WAKEEN1);
+	writel_relaxed(save->intpol0,  base + SA1111_INTPOL0);
+	writel_relaxed(save->intpol1,  base + SA1111_INTPOL1);
+	writel_relaxed(save->inten0,   base + SA1111_INTEN0);
+	writel_relaxed(save->inten1,   base + SA1111_INTEN1);
+	writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
+	writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
+	writel_relaxed(save->wakeen0,  base + SA1111_WAKEEN0);
+	writel_relaxed(save->wakeen1,  base + SA1111_WAKEEN1);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
@@ -1153,7 +1185,7 @@ static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
 {
 	unsigned int skcdr, fbdiv, ipdiv, opdiv;
 
-	skcdr = sa1111_readl(sachip->base + SA1111_SKCDR);
+	skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
 
 	fbdiv = (skcdr & 0x007f) + 2;
 	ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
@@ -1195,13 +1227,13 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_lock_irqsave(&sachip->lock, flags);
 
-	val = sa1111_readl(sachip->base + SA1111_SKCR);
+	val = readl_relaxed(sachip->base + SA1111_SKCR);
 	if (mode == SA1111_AUDIO_I2S) {
 		val &= ~SKCR_SELAC;
 	} else {
 		val |= SKCR_SELAC;
 	}
-	sa1111_writel(val, sachip->base + SA1111_SKCR);
+	writel_relaxed(val, sachip->base + SA1111_SKCR);
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
@@ -1226,7 +1258,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 	if (div > 128)
 		div = 128;
 
-	sa1111_writel(div - 1, sachip->base + SA1111_SKAUD);
+	writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
 
 	return 0;
 }
@@ -1244,7 +1276,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 	if (sadev->devid != SA1111_DEVID_SAC)
 		return -EINVAL;
 
-	div = sa1111_readl(sachip->base + SA1111_SKAUD) + 1;
+	div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
@@ -1261,10 +1293,10 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 
 #define MODIFY_BITS(port, mask, dir)		\
 	if (mask) {				\
-		val = sa1111_readl(port);	\
+		val = readl_relaxed(port);	\
 		val &= ~(mask);			\
 		val |= (dir) & (mask);		\
-		sa1111_writel(val, port);	\
+		writel_relaxed(val, port);	\
 	}
 
 	spin_lock_irqsave(&sachip->lock, flags);
@@ -1329,8 +1361,8 @@ int sa1111_enable_device(struct sa1111_dev *sadev)
 
 	if (ret == 0) {
 		spin_lock_irqsave(&sachip->lock, flags);
-		val = sa1111_readl(sachip->base + SA1111_SKPCR);
-		sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		val = readl_relaxed(sachip->base + SA1111_SKPCR);
+		writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 		spin_unlock_irqrestore(&sachip->lock, flags);
 	}
 	return ret;
@@ -1348,8 +1380,8 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	unsigned int val;
 
 	spin_lock_irqsave(&sachip->lock, flags);
-	val = sa1111_readl(sachip->base + SA1111_SKPCR);
-	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+	val = readl_relaxed(sachip->base + SA1111_SKPCR);
+	writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 
 	if (sachip->pdata && sachip->pdata->disable)
@@ -1359,9 +1391,10 @@ EXPORT_SYMBOL(sa1111_disable_device);
 
 int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
 {
-	if (num >= ARRAY_SIZE(sadev->irq))
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	if (num >= ARRAY_SIZE(sadev->hwirq))
 		return -EINVAL;
-	return sadev->irq[num];
+	return sa1111_map_irq(sachip, sadev->hwirq[num]);
 }
 EXPORT_SYMBOL_GPL(sa1111_get_irq);
 
@@ -1379,36 +1412,6 @@ static int sa1111_match(struct device *_dev, struct device_driver *_drv)
 	return !!(dev->devid & drv->devid);
 }
 
-static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
-{
-	struct sa1111_dev *sadev = to_sa1111_device(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->suspend)
-		ret = drv->suspend(sadev, state);
-	return ret;
-}
-
-static int sa1111_bus_resume(struct device *dev)
-{
-	struct sa1111_dev *sadev = to_sa1111_device(dev);
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-	int ret = 0;
-
-	if (drv && drv->resume)
-		ret = drv->resume(sadev);
-	return ret;
-}
-
-static void sa1111_bus_shutdown(struct device *dev)
-{
-	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
-
-	if (drv && drv->shutdown)
-		drv->shutdown(to_sa1111_device(dev));
-}
-
 static int sa1111_bus_probe(struct device *dev)
 {
 	struct sa1111_dev *sadev = to_sa1111_device(dev);
@@ -1436,9 +1439,6 @@ struct bus_type sa1111_bus_type = {
 	.match		= sa1111_match,
 	.probe		= sa1111_bus_probe,
 	.remove		= sa1111_bus_remove,
-	.suspend	= sa1111_bus_suspend,
-	.resume		= sa1111_bus_resume,
-	.shutdown	= sa1111_bus_shutdown,
 };
 EXPORT_SYMBOL(sa1111_bus_type);
 

arch/arm/include/asm/exception.h

@@ -10,11 +10,10 @@
 
 #include <linux/interrupt.h>
 
-#define __exception	__attribute__((section(".exception.text")))
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
 #define __exception_irq_entry	__irq_entry
 #else
-#define __exception_irq_entry	__exception
+#define __exception_irq_entry
 #endif
 
 #endif /* __ASM_ARM_EXCEPTION_H */

arch/arm/include/asm/glue-cache.h

@@ -117,6 +117,10 @@
 # endif
 #endif
 
+#if defined(CONFIG_CACHE_B15_RAC)
+# define MULTI_CACHE 1
+#endif
+
 #if defined(CONFIG_CPU_V7M)
 #  define MULTI_CACHE 1
 #endif

arch/arm/include/asm/hardware/cache-b15-rac.h

@@ -0,0 +1,10 @@
+#ifndef __ASM_ARM_HARDWARE_CACHE_B15_RAC_H
+#define __ASM_ARM_HARDWARE_CACHE_B15_RAC_H
+
+#ifndef __ASSEMBLY__
+
+void b15_flush_kern_cache_all(void);
+
+#endif
+
+#endif

arch/arm/include/asm/hardware/sa1111.h

@@ -15,33 +15,6 @@
 
 #include <mach/bitfield.h>
 
-/*
- * The SA1111 is always located at virtual 0xf4000000, and is always
- * "native" endian.
- */
-
-#define SA1111_VBASE		0xf4000000
-
-/* Don't use these! */
-#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
-#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
-
-#ifndef __ASSEMBLY__
-#define _SA1111(x)	((x) + sa1111->resource.start)
-#endif
-
-#define sa1111_writel(val,addr)	__raw_writel(val, addr)
-#define sa1111_readl(addr)	__raw_readl(addr)
-
-/*
- * 26 bits of the SA-1110 address bus are available to the SA-1111.
- * Use these when feeding target addresses to the DMA engines.
- */
-
-#define SA1111_ADDR_WIDTH	(26)
-#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
-#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
-
 /*
  * Don't ask the (SAC) DMA engines to move less than this amount.
  */
@@ -417,7 +390,7 @@ struct sa1111_dev {
 	struct resource	res;
 	void __iomem	*mapbase;
 	unsigned int	skpcr_mask;
-	unsigned int	irq[6];
+	unsigned int	hwirq[6];
 	u64		dma_mask;
 };
 
@@ -431,9 +404,6 @@ struct sa1111_driver {
 	unsigned int		devid;
 	int (*probe)(struct sa1111_dev *);
 	int (*remove)(struct sa1111_dev *);
-	int (*suspend)(struct sa1111_dev *, pm_message_t);
-	int (*resume)(struct sa1111_dev *);
-	void (*shutdown)(struct sa1111_dev *);
 };
 
 #define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)

arch/arm/include/asm/memory.h

@@ -88,6 +88,7 @@
 #else /* CONFIG_MMU */
 
 #ifndef __ASSEMBLY__
+extern unsigned long setup_vectors_base(void);
 extern unsigned long vectors_base;
 #define VECTORS_BASE		vectors_base
 #endif

arch/arm/include/asm/ptdump.h

@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2014 ARM Ltd. */
+#ifndef __ASM_PTDUMP_H
+#define __ASM_PTDUMP_H
+
+#ifdef CONFIG_ARM_PTDUMP_CORE
+
+#include <linux/mm_types.h>
+#include <linux/seq_file.h>
+
+struct addr_marker {
+	unsigned long start_address;
+	char *name;
+};
+
+struct ptdump_info {
+	struct mm_struct		*mm;
+	const struct addr_marker	*markers;
+	unsigned long			base_addr;
+};
+
+void ptdump_walk_pgd(struct seq_file *s, struct ptdump_info *info);
+#ifdef CONFIG_ARM_PTDUMP_DEBUGFS
+int ptdump_debugfs_register(struct ptdump_info *info, const char *name);
+#else
+static inline int ptdump_debugfs_register(struct ptdump_info *info,
+					const char *name)
+{
+	return 0;
+}
+#endif /* CONFIG_ARM_PTDUMP_DEBUGFS */
+
+void ptdump_check_wx(void);
+
+#endif /* CONFIG_ARM_PTDUMP_CORE */
+
+#ifdef CONFIG_DEBUG_WX
+#define debug_checkwx() ptdump_check_wx()
+#else
+#define debug_checkwx() do { } while (0)
+#endif
+
+#endif /* __ASM_PTDUMP_H */

arch/arm/include/asm/sections.h

@@ -6,4 +6,25 @@
 
 extern char _exiprom[];
 
+extern char __idmap_text_start[];
+extern char __idmap_text_end[];
+extern char __entry_text_start[];
+extern char __entry_text_end[];
+extern char __hyp_idmap_text_start[];
+extern char __hyp_idmap_text_end[];
+
+static inline bool in_entry_text(unsigned long addr)
+{
+	return memory_contains(__entry_text_start, __entry_text_end,
+			       (void *)addr, 1);
+}
+
+static inline bool in_idmap_text(unsigned long addr)
+{
+	void *a = (void *)addr;
+	return memory_contains(__idmap_text_start, __idmap_text_end, a, 1) ||
+	       memory_contains(__hyp_idmap_text_start, __hyp_idmap_text_end,
+			       a, 1);
+}
+
 #endif	/* _ASM_ARM_SECTIONS_H */

arch/arm/include/asm/string.h

@@ -39,18 +39,4 @@ static inline void *memset64(uint64_t *p, uint64_t v, __kernel_size_t n)
 	return __memset64(p, v, n * 8, v >> 32);
 }
 
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n)							\
-	({								\
-	 	void *__p = (p); size_t __n = n;			\
-		if ((__n) != 0) {					\
-			if (__builtin_constant_p((v)) && (v) == 0)	\
-				__memzero((__p),(__n));			\
-			else						\
-				memset((__p),(v),(__n));		\
-		}							\
-		(__p);							\
-	})
-
 #endif

arch/arm/include/asm/traps.h

@@ -28,18 +28,6 @@ static inline int __in_irqentry_text(unsigned long ptr)
 	       ptr < (unsigned long)&__irqentry_text_end;
 }
 
-static inline int in_exception_text(unsigned long ptr)
-{
-	extern char __exception_text_start[];
-	extern char __exception_text_end[];
-	int in;
-
-	in = ptr >= (unsigned long)&__exception_text_start &&
-	     ptr < (unsigned long)&__exception_text_end;
-
-	return in ? : __in_irqentry_text(ptr);
-}
-
 extern void __init early_trap_init(void *);
 extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame);
 extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs);

arch/arm/include/asm/unified.h

@@ -20,8 +20,10 @@
 #ifndef __ASM_UNIFIED_H
 #define __ASM_UNIFIED_H
 
-#if defined(__ASSEMBLY__) && defined(CONFIG_ARM_ASM_UNIFIED)
+#if defined(__ASSEMBLY__)
 	.syntax unified
+#else
+__asm__(".syntax unified");
 #endif
 
 #ifdef CONFIG_CPU_V7M
@@ -64,77 +66,4 @@
 
 #endif	/* CONFIG_THUMB2_KERNEL */
 
-#ifndef CONFIG_ARM_ASM_UNIFIED
-
-/*
- * If the unified assembly syntax isn't used (in ARM mode), these
- * macros expand to an empty string
- */
-#ifdef __ASSEMBLY__
-	.macro	it, cond
-	.endm
-	.macro	itt, cond
-	.endm
-	.macro	ite, cond
-	.endm
-	.macro	ittt, cond
-	.endm
-	.macro	itte, cond
-	.endm
-	.macro	itet, cond
-	.endm
-	.macro	itee, cond
-	.endm
-	.macro	itttt, cond
-	.endm
-	.macro	ittte, cond
-	.endm
-	.macro	ittet, cond
-	.endm
-	.macro	ittee, cond
-	.endm
-	.macro	itett, cond
-	.endm
-	.macro	itete, cond
-	.endm
-	.macro	iteet, cond
-	.endm
-	.macro	iteee, cond
-	.endm
-#else	/* !__ASSEMBLY__ */
-__asm__(
-"	.macro	it, cond\n"
-"	.endm\n"
-"	.macro	itt, cond\n"
-"	.endm\n"
-"	.macro	ite, cond\n"
-"	.endm\n"
-"	.macro	ittt, cond\n"
-"	.endm\n"
-"	.macro	itte, cond\n"
-"	.endm\n"
-"	.macro	itet, cond\n"
-"	.endm\n"
-"	.macro	itee, cond\n"
-"	.endm\n"
-"	.macro	itttt, cond\n"
-"	.endm\n"
-"	.macro	ittte, cond\n"
-"	.endm\n"
-"	.macro	ittet, cond\n"
-"	.endm\n"
-"	.macro	ittee, cond\n"
-"	.endm\n"
-"	.macro	itett, cond\n"
-"	.endm\n"
-"	.macro	itete, cond\n"
-"	.endm\n"
-"	.macro	iteet, cond\n"
-"	.endm\n"
-"	.macro	iteee, cond\n"
-"	.endm\n");
-#endif	/* __ASSEMBLY__ */
-
-#endif	/* CONFIG_ARM_ASM_UNIFIED */
-
 #endif	/* !__ASM_UNIFIED_H */

arch/arm/kernel/armksyms.c

@@ -92,7 +92,6 @@ EXPORT_SYMBOL(__memset64);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memmove);
 EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(__memzero);
 
 EXPORT_SYMBOL(mmioset);
 EXPORT_SYMBOL(mmiocpy);

arch/arm/kernel/entry-armv.S

@@ -82,11 +82,7 @@
 #endif
 	.endm
 
-#ifdef CONFIG_KPROBES
-	.section	.kprobes.text,"ax",%progbits
-#else
-	.text
-#endif
+	.section	.entry.text,"ax",%progbits
 
 /*
  * Invalid mode handlers

arch/arm/kernel/entry-common.S

@@ -37,6 +37,7 @@ saved_pc	.req	lr
 #define TRACE(x...)
 #endif
 
+	.section .entry.text,"ax",%progbits
 	.align	5
 #if !(IS_ENABLED(CONFIG_TRACE_IRQFLAGS) || IS_ENABLED(CONFIG_CONTEXT_TRACKING))
 /*

arch/arm/kernel/head-common.S

@@ -105,8 +105,9 @@ __mmap_switched:
    ARM(	ldmia	r4!, {r0, r1, sp} )
  THUMB(	ldmia	r4!, {r0, r1, r3} )
  THUMB(	mov	sp, r3 )
-	sub	r1, r1, r0
-	bl	__memzero			@ clear .bss
+	sub	r2, r1, r0
+	mov	r1, #0
+	bl	memset				@ clear .bss
 
 	ldmia	r4, {r0, r1, r2, r3}
 	str	r9, [r0]			@ Save processor ID

arch/arm/kernel/hw_breakpoint.c

@@ -44,17 +44,17 @@ static DEFINE_PER_CPU(struct perf_event *, bp_on_reg[ARM_MAX_BRP]);
 static DEFINE_PER_CPU(struct perf_event *, wp_on_reg[ARM_MAX_WRP]);
 
 /* Number of BRP/WRP registers on this CPU. */
-static int core_num_brps;
-static int core_num_wrps;
+static int core_num_brps __ro_after_init;
+static int core_num_wrps __ro_after_init;
 
 /* Debug architecture version. */
-static u8 debug_arch;
+static u8 debug_arch __ro_after_init;
 
 /* Does debug architecture support OS Save and Restore? */
-static bool has_ossr;
+static bool has_ossr __ro_after_init;
 
 /* Maximum supported watchpoint length. */
-static u8 max_watchpoint_len;
+static u8 max_watchpoint_len __ro_after_init;
 
 #define READ_WB_REG_CASE(OP2, M, VAL)			\
 	case ((OP2 << 4) + M):				\

arch/arm/kernel/smp.c

@@ -379,6 +379,9 @@ asmlinkage void secondary_start_kernel(void)
 
 	cpu_init();
 
+#ifndef CONFIG_MMU
+	setup_vectors_base();
+#endif
 	pr_debug("CPU%u: Booted secondary processor\n", cpu);
 
 	preempt_disable();

arch/arm/kernel/stacktrace.c

@@ -3,6 +3,7 @@
 #include <linux/sched/debug.h>
 #include <linux/stacktrace.h>
 
+#include <asm/sections.h>
 #include <asm/stacktrace.h>
 #include <asm/traps.h>
 
@@ -63,7 +64,6 @@ EXPORT_SYMBOL(walk_stackframe);
 #ifdef CONFIG_STACKTRACE
 struct stack_trace_data {
 	struct stack_trace *trace;
-	unsigned long last_pc;
 	unsigned int no_sched_functions;
 	unsigned int skip;
 };
@@ -87,16 +87,7 @@ static int save_trace(struct stackframe *frame, void *d)
 	if (trace->nr_entries >= trace->max_entries)
 		return 1;
 
-	/*
-	 * in_exception_text() is designed to test if the PC is one of
-	 * the functions which has an exception stack above it, but
-	 * unfortunately what is in frame->pc is the return LR value,
-	 * not the saved PC value.  So, we need to track the previous
-	 * frame PC value when doing this.
-	 */
-	addr = data->last_pc;
-	data->last_pc = frame->pc;
-	if (!in_exception_text(addr))
+	if (!in_entry_text(frame->pc))
 		return 0;
 
 	regs = (struct pt_regs *)frame->sp;
@@ -114,7 +105,6 @@ static noinline void __save_stack_trace(struct task_struct *tsk,
 	struct stackframe frame;
 
 	data.trace = trace;
-	data.last_pc = ULONG_MAX;
 	data.skip = trace->skip;
 	data.no_sched_functions = nosched;
 

arch/arm/kernel/traps.c

@@ -72,7 +72,7 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
-	if (in_exception_text(where))
+	if (in_entry_text(from))
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
@@ -433,7 +433,7 @@ static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
 	return fn ? fn(regs, instr) : 1;
 }
 
-asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
+asmlinkage void do_undefinstr(struct pt_regs *regs)
 {
 	unsigned int instr;
 	siginfo_t info;

arch/arm/kernel/vmlinux-xip.lds.S

@@ -96,9 +96,9 @@ SECTIONS
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
 			IDMAP_TEXT
-			__exception_text_start = .;
-			*(.exception.text)
-			__exception_text_end = .;
+			__entry_text_start = .;
+			*(.entry.text)
+			__entry_text_end = .;
 			IRQENTRY_TEXT
 			TEXT_TEXT
 			SCHED_TEXT

arch/arm/kernel/vmlinux.lds.S

@@ -105,9 +105,9 @@ SECTIONS
 	.text : {			/* Real text segment		*/
 		_stext = .;		/* Text and read-only data	*/
 			IDMAP_TEXT
-			__exception_text_start = .;
-			*(.exception.text)
-			__exception_text_end = .;
+			__entry_text_start = .;
+			*(.entry.text)
+			__entry_text_end = .;
 			IRQENTRY_TEXT
 			SOFTIRQENTRY_TEXT
 			TEXT_TEXT

arch/arm/lib/Makefile

@@ -8,7 +8,7 @@
 lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   csumpartialcopy.o csumpartialcopyuser.o clearbit.o \
 		   delay.o delay-loop.o findbit.o memchr.o memcpy.o   \
-		   memmove.o memset.o memzero.o setbit.o              \
+		   memmove.o memset.o setbit.o                        \
 		   strchr.o strrchr.o                                 \
 		   testchangebit.o testclearbit.o testsetbit.o        \
 		   ashldi3.o ashrdi3.o lshrdi3.o muldi3.o             \

arch/arm/lib/memzero.S

@@ -1,137 +0,0 @@
-/*
- *  linux/arch/arm/lib/memzero.S
- *
- *  Copyright (C) 1995-2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/unwind.h>
-
-	.text
-	.align	5
-	.word	0
-/*
- * Align the pointer in r0.  r3 contains the number of bytes that we are
- * mis-aligned by, and r1 is the number of bytes.  If r1 < 4, then we
- * don't bother; we use byte stores instead.
- */
-UNWIND(	.fnstart			)
-1:	subs	r1, r1, #4		@ 1 do we have enough
-	blt	5f			@ 1 bytes to align with?
-	cmp	r3, #2			@ 1
-	strltb	r2, [r0], #1		@ 1
-	strleb	r2, [r0], #1		@ 1
-	strb	r2, [r0], #1		@ 1
-	add	r1, r1, r3		@ 1 (r1 = r1 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted.  Try doing the
- * memzero again.
- */
-
-ENTRY(__memzero)
-	mov	r2, #0			@ 1
-	ands	r3, r0, #3		@ 1 unaligned?
-	bne	1b			@ 1
-/*
- * r3 = 0, and we know that the pointer in r0 is aligned to a word boundary.
- */
-	cmp	r1, #16			@ 1 we can skip this chunk if we
-	blt	4f			@ 1 have < 16 bytes
-
-#if ! CALGN(1)+0
-
-/*
- * We need an extra register for this loop - save the return address and
- * use the LR
- */
-	str	lr, [sp, #-4]!		@ 1
-UNWIND(	.fnend				)
-UNWIND(	.fnstart			)
-UNWIND(	.save 	{lr}			)
-	mov	ip, r2			@ 1
-	mov	lr, r2			@ 1
-
-3:	subs	r1, r1, #64		@ 1 write 32 bytes out per loop
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	stmgeia	r0!, {r2, r3, ip, lr}	@ 4
-	bgt	3b			@ 1
-	ldmeqfd	sp!, {pc}		@ 1/2 quick exit
-/*
- * No need to correct the count; we're only testing bits from now on
- */
-	tst	r1, #32			@ 1
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	tst	r1, #16			@ 1 16 bytes or more?
-	stmneia	r0!, {r2, r3, ip, lr}	@ 4
-	ldr	lr, [sp], #4		@ 1
-UNWIND(	.fnend				)
-
-#else
-
-/*
- * This version aligns the destination pointer in order to write
- * whole cache lines at once.
- */
-
-	stmfd	sp!, {r4-r7, lr}
-UNWIND(	.fnend		       )
-UNWIND(	.fnstart	       )
-UNWIND(	.save 	{r4-r7, lr}    )
-	mov	r4, r2
-	mov	r5, r2
-	mov	r6, r2
-	mov	r7, r2
-	mov	ip, r2
-	mov	lr, r2
-
-	cmp	r1, #96
-	andgts	ip, r0, #31
-	ble	3f
-
-	rsb	ip, ip, #32
-	sub	r1, r1, ip
-	movs	ip, ip, lsl #(32 - 4)
-	stmcsia	r0!, {r4, r5, r6, r7}
-	stmmiia	r0!, {r4, r5}
-	movs	ip, ip, lsl #2
-	strcs	r2, [r0], #4
-
-3:	subs	r1, r1, #64
-	stmgeia	r0!, {r2-r7, ip, lr}
-	stmgeia	r0!, {r2-r7, ip, lr}
-	bgt	3b
-	ldmeqfd	sp!, {r4-r7, pc}
-
-	tst	r1, #32
-	stmneia	r0!, {r2-r7, ip, lr}
-	tst	r1, #16
-	stmneia	r0!, {r4-r7}
-	ldmfd	sp!, {r4-r7, lr}
-UNWIND(	.fnend		       )
-
-#endif
-
-UNWIND(	.fnstart			)
-4:	tst	r1, #8			@ 1 8 bytes or more?
-	stmneia	r0!, {r2, r3}		@ 2
-	tst	r1, #4			@ 1 4 bytes or more?
-	strne	r2, [r0], #4		@ 1
-/*
- * When we get here, we've got less than 4 bytes to zero.  We
- * may have an unaligned pointer as well.
- */
-5:	tst	r1, #2			@ 1 2 bytes or more?
-	strneb	r2, [r0], #1		@ 1
-	strneb	r2, [r0], #1		@ 1
-	tst	r1, #1			@ 1 a byte left over
-	strneb	r2, [r0], #1		@ 1
-	ret	lr			@ 1
-UNWIND(	.fnend				)
-ENDPROC(__memzero)

arch/arm/mach-sa1100/Kconfig

@@ -5,6 +5,7 @@ menu "SA11x0 Implementations"
 config SA1100_ASSABET
 	bool "Assabet"
 	select ARM_SA1110_CPUFREQ
+	select GPIO_REG
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).

arch/arm/mach-sa1100/assabet.c

@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/errno.h>
+#include <linux/gpio/gpio-reg.h>
 #include <linux/ioport.h>
 #include <linux/platform_data/sa11x0-serial.h>
 #include <linux/serial_core.h>
@@ -61,20 +62,45 @@
 unsigned long SCR_value = ASSABET_SCR_INIT;
 EXPORT_SYMBOL(SCR_value);
 
-static unsigned long BCR_value = ASSABET_BCR_DB1110;
+static struct gpio_chip *assabet_bcr_gc;
+
+static const char *assabet_names[] = {
+	"cf_pwr", "cf_gfx_reset", "nsoft_reset", "irda_fsel",
+	"irda_md0", "irda_md1", "stereo_loopback", "ncf_bus_on",
+	"audio_pwr_on", "light_pwr_on", "lcd16data", "lcd_pwr_on",
+	"rs232_on", "nred_led", "ngreen_led", "vib_on",
+	"com_dtr", "com_rts", "radio_wake_mod", "i2c_enab",
+	"tvir_enab", "qmute", "radio_pwr_on", "spkr_off",
+	"rs232_valid", "com_dcd", "com_cts", "com_dsr",
+	"radio_cts", "radio_dsr", "radio_dcd", "radio_ri",
+};
 
+/* The old deprecated interface */
 void ASSABET_BCR_frob(unsigned int mask, unsigned int val)
 {
-	unsigned long flags;
+	unsigned long m = mask, v = val;
 
-	local_irq_save(flags);
-	BCR_value = (BCR_value & ~mask) | val;
-	ASSABET_BCR = BCR_value;
-	local_irq_restore(flags);
+	assabet_bcr_gc->set_multiple(assabet_bcr_gc, &m, &v);
 }
-
 EXPORT_SYMBOL(ASSABET_BCR_frob);
 
+static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)
+{
+	struct gpio_chip *gc;
+
+	writel_relaxed(def_val, reg);
+
+	gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val,
+			   assabet_names, NULL, NULL);
+
+	if (IS_ERR(gc))
+		return PTR_ERR(gc);
+
+	assabet_bcr_gc = gc;
+
+	return gc->base;
+}
+
 /*
  * The codec reset goes to three devices, so we need to release
  * the rest when any one of these requests it.  However, that
@@ -146,7 +172,7 @@ static void adv7171_write(unsigned reg, unsigned val)
 	unsigned gpdr = GPDR;
 	unsigned gplr = GPLR;
 
-	ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON;
+	ASSABET_BCR_frob(ASSABET_BCR_AUDIO_ON, ASSABET_BCR_AUDIO_ON);
 	udelay(100);
 
 	GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */
@@ -457,14 +483,6 @@ static void __init assabet_init(void)
 	sa11x0_ppc_configure_mcp();
 
 	if (machine_has_neponset()) {
-		/*
-		 * Angel sets this, but other bootloaders may not.
-		 *
-		 * This must precede any driver calls to BCR_set()
-		 * or BCR_clear().
-		 */
-		ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111;
-
 #ifndef CONFIG_ASSABET_NEPONSET
 		printk( "Warning: Neponset detected but full support "
 			"hasn't been configured in the kernel\n" );
@@ -748,12 +766,31 @@ static int __init assabet_leds_init(void)
 fs_initcall(assabet_leds_init);
 #endif
 
+void __init assabet_init_irq(void)
+{
+	u32 def_val;
+
+	sa1100_init_irq();
+
+	if (machine_has_neponset())
+		def_val = ASSABET_BCR_DB1111;
+	else
+		def_val = ASSABET_BCR_DB1110;
+
+	/*
+	 * Angel sets this, but other bootloaders may not.
+	 *
+	 * This must precede any driver calls to BCR_set() or BCR_clear().
+	 */
+	assabet_init_gpio((void *)&ASSABET_BCR, def_val);
+}
+
 MACHINE_START(ASSABET, "Intel-Assabet")
 	.atag_offset	= 0x100,
 	.fixup		= fixup_assabet,
 	.map_io		= assabet_map_io,
 	.nr_irqs	= SA1100_NR_IRQS,
-	.init_irq	= sa1100_init_irq,
+	.init_irq	= assabet_init_irq,
 	.init_time	= sa1100_timer_init,
 	.init_machine	= assabet_init,
 	.init_late	= sa11x0_init_late,

arch/arm/mach-sa1100/neponset.c

@@ -3,6 +3,8 @@
  * linux/arch/arm/mach-sa1100/neponset.c
  */
 #include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/gpio-reg.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/irq.h>
@@ -45,10 +47,13 @@
 #define IRR_USAR	(1 << 1)
 #define IRR_SA1111	(1 << 2)
 
+#define NCR_NGPIO	7
+
 #define MDM_CTL0_RTS1	(1 << 0)
 #define MDM_CTL0_DTR1	(1 << 1)
 #define MDM_CTL0_RTS2	(1 << 2)
 #define MDM_CTL0_DTR2	(1 << 3)
+#define MDM_CTL0_NGPIO	4
 
 #define MDM_CTL1_CTS1	(1 << 0)
 #define MDM_CTL1_DSR1	(1 << 1)
@@ -56,80 +61,87 @@
 #define MDM_CTL1_CTS2	(1 << 3)
 #define MDM_CTL1_DSR2	(1 << 4)
 #define MDM_CTL1_DCD2	(1 << 5)
+#define MDM_CTL1_NGPIO	6
 
 #define AUD_SEL_1341	(1 << 0)
 #define AUD_MUTE_1341	(1 << 1)
+#define AUD_NGPIO	2
 
 extern void sa1110_mb_disable(void);
 
+#define to_neponset_gpio_chip(x) container_of(x, struct neponset_gpio_chip, gc)
+
+static const char *neponset_ncr_names[] = {
+	"gp01_off", "tp_power", "ms_power", "enet_osc",
+	"spi_kb_wk_up", "a0vpp", "a1vpp"
+};
+
+static const char *neponset_mdmctl0_names[] = {
+	"rts3", "dtr3", "rts1", "dtr1",
+};
+
+static const char *neponset_mdmctl1_names[] = {
+	"cts3", "dsr3", "dcd3", "cts1", "dsr1", "dcd1"
+};
+
+static const char *neponset_aud_names[] = {
+	"sel_1341", "mute_1341",
+};
+
 struct neponset_drvdata {
 	void __iomem *base;
 	struct platform_device *sa1111;
 	struct platform_device *smc91x;
 	unsigned irq_base;
-#ifdef CONFIG_PM_SLEEP
-	u32 ncr0;
-	u32 mdm_ctl_0;
-#endif
+	struct gpio_chip *gpio[4];
 };
 
-static void __iomem *nep_base;
+static struct neponset_drvdata *nep;
 
 void neponset_ncr_frob(unsigned int mask, unsigned int val)
 {
-	void __iomem *base = nep_base;
-
-	if (base) {
-		unsigned long flags;
-		unsigned v;
-
-		local_irq_save(flags);
-		v = readb_relaxed(base + NCR_0);
-		writeb_relaxed((v & ~mask) | val, base + NCR_0);
-		local_irq_restore(flags);
-	} else {
-		WARN(1, "nep_base unset\n");
-	}
+	struct neponset_drvdata *n = nep;
+	unsigned long m = mask, v = val;
+
+	if (nep)
+		n->gpio[0]->set_multiple(n->gpio[0], &m, &v);
+	else
+		WARN(1, "nep unset\n");
 }
 EXPORT_SYMBOL(neponset_ncr_frob);
 
 static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
 {
-	void __iomem *base = nep_base;
-	u_int mdm_ctl0;
+	struct neponset_drvdata *n = nep;
+	unsigned long mask, val = 0;
 
-	if (!base)
+	if (!n)
 		return;
 
-	mdm_ctl0 = readb_relaxed(base + MDM_CTL_0);
 	if (port->mapbase == _Ser1UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			mdm_ctl0 &= ~MDM_CTL0_RTS2;
-		else
-			mdm_ctl0 |= MDM_CTL0_RTS2;
-
-		if (mctrl & TIOCM_DTR)
-			mdm_ctl0 &= ~MDM_CTL0_DTR2;
-		else
-			mdm_ctl0 |= MDM_CTL0_DTR2;
+		mask = MDM_CTL0_RTS2 | MDM_CTL0_DTR2;
+
+		if (!(mctrl & TIOCM_RTS))
+			val |= MDM_CTL0_RTS2;
+
+		if (!(mctrl & TIOCM_DTR))
+			val |= MDM_CTL0_DTR2;
 	} else if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			mdm_ctl0 &= ~MDM_CTL0_RTS1;
-		else
-			mdm_ctl0 |= MDM_CTL0_RTS1;
-
-		if (mctrl & TIOCM_DTR)
-			mdm_ctl0 &= ~MDM_CTL0_DTR1;
-		else
-			mdm_ctl0 |= MDM_CTL0_DTR1;
+		mask = MDM_CTL0_RTS1 | MDM_CTL0_DTR1;
+
+		if (!(mctrl & TIOCM_RTS))
+			val |= MDM_CTL0_RTS1;
+
+		if (!(mctrl & TIOCM_DTR))
+			val |= MDM_CTL0_DTR1;
 	}
 
-	writeb_relaxed(mdm_ctl0, base + MDM_CTL_0);
+	n->gpio[1]->set_multiple(n->gpio[1], &mask, &val);
 }
 
 static u_int neponset_get_mctrl(struct uart_port *port)
 {
-	void __iomem *base = nep_base;
+	void __iomem *base = nep->base;
 	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
 	u_int mdm_ctl1;
 
@@ -231,6 +243,22 @@ static struct irq_chip nochip = {
 	.irq_unmask = nochip_noop,
 };
 
+static int neponset_init_gpio(struct gpio_chip **gcp,
+	struct device *dev, const char *label, void __iomem *reg,
+	unsigned num, bool in, const char *const * names)
+{
+	struct gpio_chip *gc;
+
+	gc = gpio_reg_init(dev, reg, -1, num, label, in ? 0xffffffff : 0,
+			   readl_relaxed(reg), names, NULL, NULL);
+	if (IS_ERR(gc))
+		return PTR_ERR(gc);
+
+	*gcp = gc;
+
+	return 0;
+}
+
 static struct sa1111_platform_data sa1111_info = {
 	.disable_devs	= SA1111_DEVID_PS2_MSE,
 };
@@ -274,7 +302,7 @@ static int neponset_probe(struct platform_device *dev)
 	};
 	int ret, irq;
 
-	if (nep_base)
+	if (nep)
 		return -EBUSY;
 
 	irq = ret = platform_get_irq(dev, 0);
@@ -330,6 +358,22 @@ static int neponset_probe(struct platform_device *dev)
 	irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
 	irq_set_chained_handler_and_data(irq, neponset_irq_handler, d);
 
+	/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
+	writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
+
+	neponset_init_gpio(&d->gpio[0], &dev->dev, "neponset-ncr",
+			   d->base + NCR_0, NCR_NGPIO, false,
+			   neponset_ncr_names);
+	neponset_init_gpio(&d->gpio[1], &dev->dev, "neponset-mdm-ctl0",
+			   d->base + MDM_CTL_0, MDM_CTL0_NGPIO, false,
+			   neponset_mdmctl0_names);
+	neponset_init_gpio(&d->gpio[2], &dev->dev, "neponset-mdm-ctl1",
+			   d->base + MDM_CTL_1, MDM_CTL1_NGPIO, true,
+			   neponset_mdmctl1_names);
+	neponset_init_gpio(&d->gpio[3], &dev->dev, "neponset-aud-ctl",
+			   d->base + AUD_CTL, AUD_NGPIO, false,
+			   neponset_aud_names);
+
 	/*
 	 * We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
 	 * something on the Neponset activates this IRQ on sleep (eth?)
@@ -340,16 +384,13 @@ static int neponset_probe(struct platform_device *dev)
 
 	dev_info(&dev->dev, "Neponset daughter board, providing IRQ%u-%u\n",
 		 d->irq_base, d->irq_base + NEP_IRQ_NR - 1);
-	nep_base = d->base;
+	nep = d;
 
 	sa1100_register_uart_fns(&neponset_port_fns);
 
 	/* Ensure that the memory bus request/grant signals are setup */
 	sa1110_mb_disable();
 
-	/* Disable GPIO 0/1 drivers so the buttons work on the Assabet */
-	writeb_relaxed(NCR_GP01_OFF, d->base + NCR_0);
-
 	sa1111_resources[0].parent = sa1111_res;
 	sa1111_resources[1].start = d->irq_base + NEP_IRQ_SA1111;
 	sa1111_resources[1].end = d->irq_base + NEP_IRQ_SA1111;
@@ -385,7 +426,7 @@ static int neponset_remove(struct platform_device *dev)
 		platform_device_unregister(d->smc91x);
 	irq_set_chained_handler(irq, NULL);
 	irq_free_descs(d->irq_base, NEP_IRQ_NR);
-	nep_base = NULL;
+	nep = NULL;
 	iounmap(d->base);
 	kfree(d);
 
@@ -393,30 +434,22 @@ static int neponset_remove(struct platform_device *dev)
 }
 
 #ifdef CONFIG_PM_SLEEP
-static int neponset_suspend(struct device *dev)
-{
-	struct neponset_drvdata *d = dev_get_drvdata(dev);
-
-	d->ncr0 = readb_relaxed(d->base + NCR_0);
-	d->mdm_ctl_0 = readb_relaxed(d->base + MDM_CTL_0);
-
-	return 0;
-}
-
 static int neponset_resume(struct device *dev)
 {
 	struct neponset_drvdata *d = dev_get_drvdata(dev);
+	int i, ret = 0;
 
-	writeb_relaxed(d->ncr0, d->base + NCR_0);
-	writeb_relaxed(d->mdm_ctl_0, d->base + MDM_CTL_0);
+	for (i = 0; i < ARRAY_SIZE(d->gpio); i++) {
+		ret = gpio_reg_resume(d->gpio[i]);
+		if (ret)
+			break;
+	}
 
-	return 0;
+	return ret;
 }
 
 static const struct dev_pm_ops neponset_pm_ops = {
-	.suspend_noirq = neponset_suspend,
 	.resume_noirq = neponset_resume,
-	.freeze_noirq = neponset_suspend,
 	.restore_noirq = neponset_resume,
 };
 #define PM_OPS &neponset_pm_ops

arch/arm/mm/Kconfig

@@ -909,6 +909,14 @@ config OUTER_CACHE_SYNC
 	  The outer cache has a outer_cache_fns.sync function pointer
 	  that can be used to drain the write buffer of the outer cache.
 
+config CACHE_B15_RAC
+	bool "Enable the Broadcom Brahma-B15 read-ahead cache controller"
+	depends on ARCH_BRCMSTB
+	default y
+	help
+	  This option enables the Broadcom Brahma-B15 read-ahead cache
+	  controller. If disabled, the read-ahead cache remains off.
+
 config CACHE_FEROCEON_L2
 	bool "Enable the Feroceon L2 cache controller"
 	depends on ARCH_MV78XX0 || ARCH_MVEBU

arch/arm/mm/Makefile

@@ -13,7 +13,8 @@ obj-y				+= nommu.o
 obj-$(CONFIG_ARM_MPU)		+= pmsa-v7.o
 endif
 
-obj-$(CONFIG_ARM_PTDUMP)	+= dump.o
+obj-$(CONFIG_ARM_PTDUMP_CORE)	+= dump.o
+obj-$(CONFIG_ARM_PTDUMP_DEBUGFS)	+= ptdump_debugfs.o
 obj-$(CONFIG_MODULES)		+= proc-syms.o
 obj-$(CONFIG_DEBUG_VIRTUAL)	+= physaddr.o
 
@@ -103,6 +104,7 @@ AFLAGS_proc-v6.o	:=-Wa,-march=armv6
 AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
 
 obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
+obj-$(CONFIG_CACHE_B15_RAC)	+= cache-b15-rac.o
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o l2c-l2x0-resume.o
 obj-$(CONFIG_CACHE_L2X0_PMU)	+= cache-l2x0-pmu.o

arch/arm/mm/cache-b15-rac.c

@@ -0,0 +1,356 @@
+/*
+ * Broadcom Brahma-B15 CPU read-ahead cache management functions
+ *
+ * Copyright (C) 2015-2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/of_address.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/syscore_ops.h>
+#include <linux/reboot.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-b15-rac.h>
+
+extern void v7_flush_kern_cache_all(void);
+
+/* RAC register offsets, relative to the HIF_CPU_BIUCTRL register base */
+#define RAC_CONFIG0_REG			(0x78)
+#define  RACENPREF_MASK			(0x3)
+#define  RACPREFINST_SHIFT		(0)
+#define  RACENINST_SHIFT		(2)
+#define  RACPREFDATA_SHIFT		(4)
+#define  RACENDATA_SHIFT		(6)
+#define  RAC_CPU_SHIFT			(8)
+#define  RACCFG_MASK			(0xff)
+#define RAC_CONFIG1_REG			(0x7c)
+#define RAC_FLUSH_REG			(0x80)
+#define  FLUSH_RAC			(1 << 0)
+
+/* Bitmask to enable instruction and data prefetching with a 256-bytes stride */
+#define RAC_DATA_INST_EN_MASK		(1 << RACPREFINST_SHIFT | \
+					 RACENPREF_MASK << RACENINST_SHIFT | \
+					 1 << RACPREFDATA_SHIFT | \
+					 RACENPREF_MASK << RACENDATA_SHIFT)
+
+#define RAC_ENABLED			0
+/* Special state where we want to bypass the spinlock and call directly
+ * into the v7 cache maintenance operations during suspend/resume
+ */
+#define RAC_SUSPENDED			1
+
+static void __iomem *b15_rac_base;
+static DEFINE_SPINLOCK(rac_lock);
+
+static u32 rac_config0_reg;
+
+/* Initialization flag to avoid checking for b15_rac_base, and to prevent
+ * multi-platform kernels from crashing here as well.
+ */
+static unsigned long b15_rac_flags;
+
+static inline u32 __b15_rac_disable(void)
+{
+	u32 val = __raw_readl(b15_rac_base + RAC_CONFIG0_REG);
+	__raw_writel(0, b15_rac_base + RAC_CONFIG0_REG);
+	dmb();
+	return val;
+}
+
+static inline void __b15_rac_flush(void)
+{
+	u32 reg;
+
+	__raw_writel(FLUSH_RAC, b15_rac_base + RAC_FLUSH_REG);
+	do {
+		/* This dmb() is required to force the Bus Interface Unit
+		 * to clean oustanding writes, and forces an idle cycle
+		 * to be inserted.
+		 */
+		dmb();
+		reg = __raw_readl(b15_rac_base + RAC_FLUSH_REG);
+	} while (reg & FLUSH_RAC);
+}
+
+static inline u32 b15_rac_disable_and_flush(void)
+{
+	u32 reg;
+
+	reg = __b15_rac_disable();
+	__b15_rac_flush();
+	return reg;
+}
+
+static inline void __b15_rac_enable(u32 val)
+{
+	__raw_writel(val, b15_rac_base + RAC_CONFIG0_REG);
+	/* dsb() is required here to be consistent with __flush_icache_all() */
+	dsb();
+}
+
+#define BUILD_RAC_CACHE_OP(name, bar)				\
+void b15_flush_##name(void)					\
+{								\
+	unsigned int do_flush;					\
+	u32 val = 0;						\
+								\
+	if (test_bit(RAC_SUSPENDED, &b15_rac_flags)) {		\
+		v7_flush_##name();				\
+		bar;						\
+		return;						\
+	}							\
+								\
+	spin_lock(&rac_lock);					\
+	do_flush = test_bit(RAC_ENABLED, &b15_rac_flags);	\
+	if (do_flush)						\
+		val = b15_rac_disable_and_flush();		\
+	v7_flush_##name();					\
+	if (!do_flush)						\
+		bar;						\
+	else							\
+		__b15_rac_enable(val);				\
+	spin_unlock(&rac_lock);					\
+}
+
+#define nobarrier
+
+/* The readahead cache present in the Brahma-B15 CPU is a special piece of
+ * hardware after the integrated L2 cache of the B15 CPU complex whose purpose
+ * is to prefetch instruction and/or data with a line size of either 64 bytes
+ * or 256 bytes. The rationale is that the data-bus of the CPU interface is
+ * optimized for 256-bytes transactions, and enabling the readahead cache
+ * provides a significant performance boost we want it enabled (typically
+ * twice the performance for a memcpy benchmark application).
+ *
+ * The readahead cache is transparent for Modified Virtual Addresses
+ * cache maintenance operations: ICIMVAU, DCIMVAC, DCCMVAC, DCCMVAU and
+ * DCCIMVAC.
+ *
+ * It is however not transparent for the following cache maintenance
+ * operations: DCISW, DCCSW, DCCISW, ICIALLUIS and ICIALLU which is precisely
+ * what we are patching here with our BUILD_RAC_CACHE_OP here.
+ */
+BUILD_RAC_CACHE_OP(kern_cache_all, nobarrier);
+
+static void b15_rac_enable(void)
+{
+	unsigned int cpu;
+	u32 enable = 0;
+
+	for_each_possible_cpu(cpu)
+		enable |= (RAC_DATA_INST_EN_MASK << (cpu * RAC_CPU_SHIFT));
+
+	b15_rac_disable_and_flush();
+	__b15_rac_enable(enable);
+}
+
+static int b15_rac_reboot_notifier(struct notifier_block *nb,
+				   unsigned long action,
+				   void *data)
+{
+	/* During kexec, we are not yet migrated on the boot CPU, so we need to
+	 * make sure we are SMP safe here. Once the RAC is disabled, flag it as
+	 * suspended such that the hotplug notifier returns early.
+	 */
+	if (action == SYS_RESTART) {
+		spin_lock(&rac_lock);
+		b15_rac_disable_and_flush();
+		clear_bit(RAC_ENABLED, &b15_rac_flags);
+		set_bit(RAC_SUSPENDED, &b15_rac_flags);
+		spin_unlock(&rac_lock);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block b15_rac_reboot_nb = {
+	.notifier_call	= b15_rac_reboot_notifier,
+};
+
+/* The CPU hotplug case is the most interesting one, we basically need to make
+ * sure that the RAC is disabled for the entire system prior to having a CPU
+ * die, in particular prior to this dying CPU having exited the coherency
+ * domain.
+ *
+ * Once this CPU is marked dead, we can safely re-enable the RAC for the
+ * remaining CPUs in the system which are still online.
+ *
+ * Offlining a CPU is the problematic case, onlining a CPU is not much of an
+ * issue since the CPU and its cache-level hierarchy will start filling with
+ * the RAC disabled, so L1 and L2 only.
+ *
+ * In this function, we should NOT have to verify any unsafe setting/condition
+ * b15_rac_base:
+ *
+ *   It is protected by the RAC_ENABLED flag which is cleared by default, and
+ *   being cleared when initial procedure is done. b15_rac_base had been set at
+ *   that time.
+ *
+ * RAC_ENABLED:
+ *   There is a small timing windows, in b15_rac_init(), between
+ *      cpuhp_setup_state_*()
+ *      ...
+ *      set RAC_ENABLED
+ *   However, there is no hotplug activity based on the Linux booting procedure.
+ *
+ * Since we have to disable RAC for all cores, we keep RAC on as long as as
+ * possible (disable it as late as possible) to gain the cache benefit.
+ *
+ * Thus, dying/dead states are chosen here
+ *
+ * We are choosing not do disable the RAC on a per-CPU basis, here, if we did
+ * we would want to consider disabling it as early as possible to benefit the
+ * other active CPUs.
+ */
+
+/* Running on the dying CPU */
+static int b15_rac_dying_cpu(unsigned int cpu)
+{
+	/* During kexec/reboot, the RAC is disabled via the reboot notifier
+	 * return early here.
+	 */
+	if (test_bit(RAC_SUSPENDED, &b15_rac_flags))
+		return 0;
+
+	spin_lock(&rac_lock);
+
+	/* Indicate that we are starting a hotplug procedure */
+	__clear_bit(RAC_ENABLED, &b15_rac_flags);
+
+	/* Disable the readahead cache and save its value to a global */
+	rac_config0_reg = b15_rac_disable_and_flush();
+
+	spin_unlock(&rac_lock);
+
+	return 0;
+}
+
+/* Running on a non-dying CPU */
+static int b15_rac_dead_cpu(unsigned int cpu)
+{
+	/* During kexec/reboot, the RAC is disabled via the reboot notifier
+	 * return early here.
+	 */
+	if (test_bit(RAC_SUSPENDED, &b15_rac_flags))
+		return 0;
+
+	spin_lock(&rac_lock);
+
+	/* And enable it */
+	__b15_rac_enable(rac_config0_reg);
+	__set_bit(RAC_ENABLED, &b15_rac_flags);
+
+	spin_unlock(&rac_lock);
+
+	return 0;
+}
+
+static int b15_rac_suspend(void)
+{
+	/* Suspend the read-ahead cache oeprations, forcing our cache
+	 * implementation to fallback to the regular ARMv7 calls.
+	 *
+	 * We are guaranteed to be running on the boot CPU at this point and
+	 * with every other CPU quiesced, so setting RAC_SUSPENDED is not racy
+	 * here.
+	 */
+	rac_config0_reg = b15_rac_disable_and_flush();
+	set_bit(RAC_SUSPENDED, &b15_rac_flags);
+
+	return 0;
+}
+
+static void b15_rac_resume(void)
+{
+	/* Coming out of a S3 suspend/resume cycle, the read-ahead cache
+	 * register RAC_CONFIG0_REG will be restored to its default value, make
+	 * sure we re-enable it and set the enable flag, we are also guaranteed
+	 * to run on the boot CPU, so not racy again.
+	 */
+	__b15_rac_enable(rac_config0_reg);
+	clear_bit(RAC_SUSPENDED, &b15_rac_flags);
+}
+
+static struct syscore_ops b15_rac_syscore_ops = {
+	.suspend	= b15_rac_suspend,
+	.resume		= b15_rac_resume,
+};
+
+static int __init b15_rac_init(void)
+{
+	struct device_node *dn;
+	int ret = 0, cpu;
+	u32 reg, en_mask = 0;
+
+	dn = of_find_compatible_node(NULL, NULL, "brcm,brcmstb-cpu-biu-ctrl");
+	if (!dn)
+		return -ENODEV;
+
+	if (WARN(num_possible_cpus() > 4, "RAC only supports 4 CPUs\n"))
+		goto out;
+
+	b15_rac_base = of_iomap(dn, 0);
+	if (!b15_rac_base) {
+		pr_err("failed to remap BIU control base\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = register_reboot_notifier(&b15_rac_reboot_nb);
+	if (ret) {
+		pr_err("failed to register reboot notifier\n");
+		iounmap(b15_rac_base);
+		goto out;
+	}
+
+	if (IS_ENABLED(CONFIG_HOTPLUG_CPU)) {
+		ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DEAD,
+					"arm/cache-b15-rac:dead",
+					NULL, b15_rac_dead_cpu);
+		if (ret)
+			goto out_unmap;
+
+		ret = cpuhp_setup_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
+					"arm/cache-b15-rac:dying",
+					NULL, b15_rac_dying_cpu);
+		if (ret)
+			goto out_cpu_dead;
+	}
+
+	if (IS_ENABLED(CONFIG_PM_SLEEP))
+		register_syscore_ops(&b15_rac_syscore_ops);
+
+	spin_lock(&rac_lock);
+	reg = __raw_readl(b15_rac_base + RAC_CONFIG0_REG);
+	for_each_possible_cpu(cpu)
+		en_mask |= ((1 << RACPREFDATA_SHIFT) << (cpu * RAC_CPU_SHIFT));
+	WARN(reg & en_mask, "Read-ahead cache not previously disabled\n");
+
+	b15_rac_enable();
+	set_bit(RAC_ENABLED, &b15_rac_flags);
+	spin_unlock(&rac_lock);
+
+	pr_info("Broadcom Brahma-B15 readahead cache at: 0x%p\n",
+		b15_rac_base + RAC_CONFIG0_REG);
+
+	goto out;
+
+out_cpu_dead:
+	cpuhp_remove_state_nocalls(CPUHP_AP_ARM_CACHE_B15_RAC_DYING);
+out_unmap:
+	unregister_reboot_notifier(&b15_rac_reboot_nb);
+	iounmap(b15_rac_base);
+out:
+	of_node_put(dn);
+	return ret;
+}
+arch_initcall(b15_rac_init);

arch/arm/mm/cache-v7.S

@@ -15,6 +15,7 @@
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/unwind.h>
+#include <asm/hardware/cache-b15-rac.h>
 
 #include "proc-macros.S"
 
@@ -446,3 +447,23 @@ ENDPROC(v7_dma_unmap_area)
 
 	@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
 	define_cache_functions v7
+
+	/* The Broadcom Brahma-B15 read-ahead cache requires some modifications
+	 * to the v7_cache_fns, we only override the ones we need
+	 */
+#ifndef CONFIG_CACHE_B15_RAC
+	globl_equ	b15_flush_kern_cache_all,	v7_flush_kern_cache_all
+#endif
+	globl_equ	b15_flush_icache_all,		v7_flush_icache_all
+	globl_equ	b15_flush_kern_cache_louis,	v7_flush_kern_cache_louis
+	globl_equ	b15_flush_user_cache_all,	v7_flush_user_cache_all
+	globl_equ	b15_flush_user_cache_range,	v7_flush_user_cache_range
+	globl_equ	b15_coherent_kern_range,	v7_coherent_kern_range
+	globl_equ	b15_coherent_user_range,	v7_coherent_user_range
+	globl_equ	b15_flush_kern_dcache_area,	v7_flush_kern_dcache_area
+
+	globl_equ	b15_dma_map_area,		v7_dma_map_area
+	globl_equ	b15_dma_unmap_area,		v7_dma_unmap_area
+	globl_equ	b15_dma_flush_range,		v7_dma_flush_range
+
+	define_cache_functions b15

arch/arm/mm/dump.c

@@ -21,11 +21,7 @@
 #include <asm/fixmap.h>
 #include <asm/memory.h>
 #include <asm/pgtable.h>
-
-struct addr_marker {
-	unsigned long start_address;
-	const char *name;
-};
+#include <asm/ptdump.h>
 
 static struct addr_marker address_markers[] = {
 	{ MODULES_VADDR,	"Modules" },
@@ -38,12 +34,26 @@ static struct addr_marker address_markers[] = {
 	{ -1,			NULL },
 };
 
+#define pt_dump_seq_printf(m, fmt, args...) \
+({                      \
+	if (m)					\
+		seq_printf(m, fmt, ##args);	\
+})
+
+#define pt_dump_seq_puts(m, fmt)    \
+({						\
+	if (m)					\
+		seq_printf(m, fmt);	\
+})
+
 struct pg_state {
 	struct seq_file *seq;
 	const struct addr_marker *marker;
 	unsigned long start_address;
 	unsigned level;
 	u64 current_prot;
+	bool check_wx;
+	unsigned long wx_pages;
 	const char *current_domain;
 };
 
@@ -52,6 +62,8 @@ struct prot_bits {
 	u64		val;
 	const char	*set;
 	const char	*clear;
+	bool		ro_bit;
+	bool		nx_bit;
 };
 
 static const struct prot_bits pte_bits[] = {
@@ -65,11 +77,13 @@ static const struct prot_bits pte_bits[] = {
 		.val	= L_PTE_RDONLY,
 		.set	= "ro",
 		.clear	= "RW",
+		.ro_bit	= true,
 	}, {
 		.mask	= L_PTE_XN,
 		.val	= L_PTE_XN,
 		.set	= "NX",
 		.clear	= "x ",
+		.nx_bit	= true,
 	}, {
 		.mask	= L_PTE_SHARED,
 		.val	= L_PTE_SHARED,
@@ -133,11 +147,13 @@ static const struct prot_bits section_bits[] = {
 		.val	= L_PMD_SECT_RDONLY | PMD_SECT_AP2,
 		.set	= "ro",
 		.clear	= "RW",
+		.ro_bit	= true,
 #elif __LINUX_ARM_ARCH__ >= 6
 	{
 		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val	= PMD_SECT_APX | PMD_SECT_AP_WRITE,
 		.set	= "    ro",
+		.ro_bit	= true,
 	}, {
 		.mask	= PMD_SECT_APX | PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val	= PMD_SECT_AP_WRITE,
@@ -156,6 +172,7 @@ static const struct prot_bits section_bits[] = {
 		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val    = 0,
 		.set    = "    ro",
+		.ro_bit	= true,
 	}, {
 		.mask   = PMD_SECT_AP_READ | PMD_SECT_AP_WRITE,
 		.val    = PMD_SECT_AP_WRITE,
@@ -174,6 +191,7 @@ static const struct prot_bits section_bits[] = {
 		.val	= PMD_SECT_XN,
 		.set	= "NX",
 		.clear	= "x ",
+		.nx_bit	= true,
 	}, {
 		.mask	= PMD_SECT_S,
 		.val	= PMD_SECT_S,
@@ -186,6 +204,8 @@ struct pg_level {
 	const struct prot_bits *bits;
 	size_t num;
 	u64 mask;
+	const struct prot_bits *ro_bit;
+	const struct prot_bits *nx_bit;
 };
 
 static struct pg_level pg_level[] = {
@@ -214,10 +234,27 @@ static void dump_prot(struct pg_state *st, const struct prot_bits *bits, size_t
 			s = bits->clear;
 
 		if (s)
-			seq_printf(st->seq, " %s", s);
+			pt_dump_seq_printf(st->seq, " %s", s);
 	}
 }
 
+static void note_prot_wx(struct pg_state *st, unsigned long addr)
+{
+	if (!st->check_wx)
+		return;
+	if ((st->current_prot & pg_level[st->level].ro_bit->mask) ==
+				pg_level[st->level].ro_bit->val)
+		return;
+	if ((st->current_prot & pg_level[st->level].nx_bit->mask) ==
+				pg_level[st->level].nx_bit->val)
+		return;
+
+	WARN_ONCE(1, "arm/mm: Found insecure W+X mapping at address %pS\n",
+			(void *)st->start_address);
+
+	st->wx_pages += (addr - st->start_address) / PAGE_SIZE;
+}
+
 static void note_page(struct pg_state *st, unsigned long addr,
 		      unsigned int level, u64 val, const char *domain)
 {
@@ -228,7 +265,7 @@ static void note_page(struct pg_state *st, unsigned long addr,
 		st->level = level;
 		st->current_prot = prot;
 		st->current_domain = domain;
-		seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+		pt_dump_seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
 	} else if (prot != st->current_prot || level != st->level ||
 		   domain != st->current_domain ||
 		   addr >= st->marker[1].start_address) {
@@ -236,7 +273,8 @@ static void note_page(struct pg_state *st, unsigned long addr,
 		unsigned long delta;
 
 		if (st->current_prot) {
-			seq_printf(st->seq, "0x%08lx-0x%08lx   ",
+			note_prot_wx(st, addr);
+			pt_dump_seq_printf(st->seq, "0x%08lx-0x%08lx   ",
 				   st->start_address, addr);
 
 			delta = (addr - st->start_address) >> 10;
@@ -244,17 +282,19 @@ static void note_page(struct pg_state *st, unsigned long addr,
 				delta >>= 10;
 				unit++;
 			}
-			seq_printf(st->seq, "%9lu%c", delta, *unit);
+			pt_dump_seq_printf(st->seq, "%9lu%c", delta, *unit);
 			if (st->current_domain)
-				seq_printf(st->seq, " %s", st->current_domain);
+				pt_dump_seq_printf(st->seq, " %s",
+							st->current_domain);
 			if (pg_level[st->level].bits)
 				dump_prot(st, pg_level[st->level].bits, pg_level[st->level].num);
-			seq_printf(st->seq, "\n");
+			pt_dump_seq_printf(st->seq, "\n");
 		}
 
 		if (addr >= st->marker[1].start_address) {
 			st->marker++;
-			seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+			pt_dump_seq_printf(st->seq, "---[ %s ]---\n",
+							st->marker->name);
 		}
 		st->start_address = addr;
 		st->current_prot = prot;
@@ -335,61 +375,82 @@ static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
 	}
 }
 
-static void walk_pgd(struct seq_file *m)
+static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
+			unsigned long start)
 {
-	pgd_t *pgd = swapper_pg_dir;
-	struct pg_state st;
-	unsigned long addr;
+	pgd_t *pgd = pgd_offset(mm, 0UL);
 	unsigned i;
-
-	memset(&st, 0, sizeof(st));
-	st.seq = m;
-	st.marker = address_markers;
+	unsigned long addr;
 
 	for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
-		addr = i * PGDIR_SIZE;
+		addr = start + i * PGDIR_SIZE;
 		if (!pgd_none(*pgd)) {
-			walk_pud(&st, pgd, addr);
+			walk_pud(st, pgd, addr);
 		} else {
-			note_page(&st, addr, 1, pgd_val(*pgd), NULL);
+			note_page(st, addr, 1, pgd_val(*pgd), NULL);
 		}
 	}
-
-	note_page(&st, 0, 0, 0, NULL);
 }
 
-static int ptdump_show(struct seq_file *m, void *v)
+void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info)
 {
-	walk_pgd(m);
-	return 0;
-}
+	struct pg_state st = {
+		.seq = m,
+		.marker = info->markers,
+		.check_wx = false,
+	};
 
-static int ptdump_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ptdump_show, NULL);
+	walk_pgd(&st, info->mm, info->base_addr);
+	note_page(&st, 0, 0, 0, NULL);
 }
 
-static const struct file_operations ptdump_fops = {
-	.open		= ptdump_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int ptdump_init(void)
+static void ptdump_initialize(void)
 {
-	struct dentry *pe;
 	unsigned i, j;
 
 	for (i = 0; i < ARRAY_SIZE(pg_level); i++)
 		if (pg_level[i].bits)
-			for (j = 0; j < pg_level[i].num; j++)
+			for (j = 0; j < pg_level[i].num; j++) {
 				pg_level[i].mask |= pg_level[i].bits[j].mask;
+				if (pg_level[i].bits[j].ro_bit)
+					pg_level[i].ro_bit = &pg_level[i].bits[j];
+				if (pg_level[i].bits[j].nx_bit)
+					pg_level[i].nx_bit = &pg_level[i].bits[j];
+			}
 
 	address_markers[2].start_address = VMALLOC_START;
+}
+
+static struct ptdump_info kernel_ptdump_info = {
+	.mm = &init_mm,
+	.markers = address_markers,
+	.base_addr = 0,
+};
 
-	pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
-				 &ptdump_fops);
-	return pe ? 0 : -ENOMEM;
+void ptdump_check_wx(void)
+{
+	struct pg_state st = {
+		.seq = NULL,
+		.marker = (struct addr_marker[]) {
+			{ 0, NULL},
+			{ -1, NULL},
+		},
+		.check_wx = true,
+	};
+
+	walk_pgd(&st, &init_mm, 0);
+	note_page(&st, 0, 0, 0, NULL);
+	if (st.wx_pages)
+		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n",
+			st.wx_pages);
+	else
+		pr_info("Checked W+X mappings: passed, no W+X pages found\n");
+}
+
+static int ptdump_init(void)
+{
+	ptdump_initialize();
+	return ptdump_debugfs_register(&kernel_ptdump_info,
+					"kernel_page_tables");
 }
 __initcall(ptdump_init);

arch/arm/mm/fault.c

@@ -21,7 +21,6 @@
 #include <linux/highmem.h>
 #include <linux/perf_event.h>
 
-#include <asm/exception.h>
 #include <asm/pgtable.h>
 #include <asm/system_misc.h>
 #include <asm/system_info.h>
@@ -545,7 +544,7 @@ hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *)
 /*
  * Dispatch a data abort to the relevant handler.
  */
-asmlinkage void __exception
+asmlinkage void
 do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
 	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
@@ -578,7 +577,7 @@ hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int, struct pt_regs *
 	ifsr_info[nr].name = name;
 }
 
-asmlinkage void __exception
+asmlinkage void
 do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
 	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);

arch/arm/mm/idmap.c

@@ -16,8 +16,8 @@
  * are not supported on any CPU using the idmap tables as its current
  * page tables.
  */
-pgd_t *idmap_pgd;
-long long arch_phys_to_idmap_offset;
+pgd_t *idmap_pgd __ro_after_init;
+long long arch_phys_to_idmap_offset __ro_after_init;
 
 #ifdef CONFIG_ARM_LPAE
 static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,

arch/arm/mm/init.c

@@ -36,6 +36,7 @@
 #include <asm/system_info.h>
 #include <asm/tlb.h>
 #include <asm/fixmap.h>
+#include <asm/ptdump.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -738,6 +739,7 @@ static int __mark_rodata_ro(void *unused)
 void mark_rodata_ro(void)
 {
 	stop_machine(__mark_rodata_ro, NULL, NULL);
+	debug_checkwx();
 }
 
 void set_kernel_text_rw(void)

arch/arm/mm/nommu.c

@@ -31,7 +31,7 @@ struct mpu_rgn_info mpu_rgn_info;
 
 #ifdef CONFIG_CPU_CP15
 #ifdef CONFIG_CPU_HIGH_VECTOR
-static unsigned long __init setup_vectors_base(void)
+unsigned long setup_vectors_base(void)
 {
 	unsigned long reg = get_cr();
 
@@ -57,7 +57,7 @@ static inline bool security_extensions_enabled(void)
 	return 0;
 }
 
-static unsigned long __init setup_vectors_base(void)
+unsigned long setup_vectors_base(void)
 {
 	unsigned long base = 0, reg = get_cr();
 

arch/arm/mm/pmsa-v7.c

@@ -6,6 +6,7 @@
 
 #include <linux/bitops.h>
 #include <linux/memblock.h>
+#include <linux/string.h>
 
 #include <asm/cacheflush.h>
 #include <asm/cp15.h>
@@ -296,6 +297,7 @@ void __init adjust_lowmem_bounds_mpu(void)
 		}
 	}
 
+	memset(mem, 0, sizeof(mem));
 	num = allocate_region(mem_start, specified_mem_size, mem_max_regions, mem);
 
 	for (i = 0; i < num; i++) {
@@ -433,7 +435,7 @@ void __init mpu_setup(void)
 
 	/* Background */
 	err |= mpu_setup_region(region++, 0, 32,
-				MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0NA,
+				MPU_ACR_XN | MPU_RGN_STRONGLY_ORDERED | MPU_AP_PL1RW_PL0RW,
 				0, false);
 
 #ifdef CONFIG_XIP_KERNEL

arch/arm/mm/proc-v7.S

@@ -567,7 +567,7 @@ __v7_setup_stack:
 	/*
 	 * Standard v7 proc info content
 	 */
-.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
+.macro __v7_proc name, initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions, cache_fns = v7_cache_fns
 	ALT_SMP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
 			PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
 	ALT_UP(.long	PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
@@ -583,7 +583,7 @@ __v7_setup_stack:
 	.long	\proc_fns
 	.long	v7wbi_tlb_fns
 	.long	v6_user_fns
-	.long	v7_cache_fns
+	.long	\cache_fns
 .endm
 
 #ifndef CONFIG_ARM_LPAE
@@ -678,7 +678,7 @@ __v7_ca15mp_proc_info:
 __v7_b15mp_proc_info:
 	.long	0x420f00f0
 	.long	0xff0ffff0
-	__v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup
+	__v7_proc __v7_b15mp_proc_info, __v7_b15mp_setup, cache_fns = b15_cache_fns
 	.size	__v7_b15mp_proc_info, . - __v7_b15mp_proc_info
 
 	/*

arch/arm/mm/ptdump_debugfs.c

@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include <asm/ptdump.h>
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+	struct ptdump_info *info = m->private;
+
+	ptdump_walk_pgd(m, info);
+	return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ptdump_show, inode->i_private);
+}
+
+static const struct file_operations ptdump_fops = {
+	.open		= ptdump_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+int ptdump_debugfs_register(struct ptdump_info *info, const char *name)
+{
+	struct dentry *pe;
+
+	pe = debugfs_create_file(name, 0400, NULL, info, &ptdump_fops);
+	return pe ? 0 : -ENOMEM;
+
+}

arch/arm/probes/kprobes/core.c

@@ -32,6 +32,7 @@
 #include <linux/percpu.h>
 #include <linux/bug.h>
 #include <asm/patch.h>
+#include <asm/sections.h>
 
 #include "../decode-arm.h"
 #include "../decode-thumb.h"
@@ -64,9 +65,6 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 	int is;
 	const struct decode_checker **checkers;
 
-	if (in_exception_text(addr))
-		return -EINVAL;
-
 #ifdef CONFIG_THUMB2_KERNEL
 	thumb = true;
 	addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
@@ -680,3 +678,13 @@ int __init arch_init_kprobes()
 #endif
 	return 0;
 }
+
+bool arch_within_kprobe_blacklist(unsigned long addr)
+{
+	void *a = (void *)addr;
+
+	return __in_irqentry_text(addr) ||
+	       in_entry_text(addr) ||
+	       in_idmap_text(addr) ||
+	       memory_contains(__kprobes_text_start, __kprobes_text_end, a, 1);
+}

drivers/dma/imx-dma.c

@@ -765,7 +765,7 @@ static int imxdma_alloc_chan_resources(struct dma_chan *chan)
 		desc = kzalloc(sizeof(*desc), GFP_KERNEL);
 		if (!desc)
 			break;
-		__memzero(&desc->desc, sizeof(struct dma_async_tx_descriptor));
+		memset(&desc->desc, 0, sizeof(struct dma_async_tx_descriptor));
 		dma_async_tx_descriptor_init(&desc->desc, chan);
 		desc->desc.tx_submit = imxdma_tx_submit;
 		/* txd.flags will be overwritten in prep funcs */

include/linux/cpuhotplug.h

@@ -59,6 +59,7 @@ enum cpuhp_state {
 	CPUHP_PCI_XGENE_DEAD,
 	CPUHP_IOMMU_INTEL_DEAD,
 	CPUHP_LUSTRE_CFS_DEAD,
+	CPUHP_AP_ARM_CACHE_B15_RAC_DEAD,
 	CPUHP_WORKQUEUE_PREP,
 	CPUHP_POWER_NUMA_PREPARE,
 	CPUHP_HRTIMERS_PREPARE,
@@ -138,6 +139,7 @@ enum cpuhp_state {
 	CPUHP_AP_ARM64_ISNDEP_STARTING,
 	CPUHP_AP_SMPCFD_DYING,
 	CPUHP_AP_X86_TBOOT_DYING,
+	CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
 	CPUHP_AP_ONLINE,
 	CPUHP_TEARDOWN_CPU,
 	CPUHP_AP_ONLINE_IDLE,