tty/serial: atmel: fix fractional baud rate computation

The problem with previous code was it rounded values in wrong
place and produced wrong baud rate in some cases.

Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com>
[nicolas.ferre@atmel.com: port to newer kernel and add commit log]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/atmel_serial.c

@@ -2170,13 +2170,15 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 	 * accurately. This feature is enabled only when using normal mode.
 	 * baudrate = selected clock / (8 * (2 - OVER) * (CD + FP / 8))
 	 * Currently, OVER is always set to 0 so we get
-	 * baudrate = selected clock (16 * (CD + FP / 8))
+	 * baudrate = selected clock / (16 * (CD + FP / 8))
+	 * then
+	 * 8 CD + FP = selected clock / (2 * baudrate)
 	 */
 	if (atmel_port->has_frac_baudrate &&
 	    (mode & ATMEL_US_USMODE) == ATMEL_US_USMODE_NORMAL) {
-		div = DIV_ROUND_CLOSEST(port->uartclk, baud);
-		cd = div / 16;
-		fp = DIV_ROUND_CLOSEST(div % 16, 2);
+		div = DIV_ROUND_CLOSEST(port->uartclk, baud * 2);
+		cd = div >> 3;
+		fp = div & ATMEL_US_FP_MASK;
 	} else {
 		cd = uart_get_divisor(port, baud);
 	}

include/linux/atmel_serial.h

@@ -119,6 +119,7 @@
 #define ATMEL_US_BRGR		0x20	/* Baud Rate Generator Register */
 #define	ATMEL_US_CD		GENMASK(15, 0)	/* Clock Divider */
 #define ATMEL_US_FP_OFFSET	16	/* Fractional Part */
+#define ATMEL_US_FP_MASK	0x7
 
 #define ATMEL_US_RTOR		0x24	/* Receiver Time-out Register for USART */
 #define ATMEL_UA_RTOR		0x28	/* Receiver Time-out Register for UART */