[IA64] Manual merge fix for 3 files

	arch/ia64/Kconfig
	arch/ia64/kernel/acpi.c
	include/asm-ia64/irq.h

Signed-off-by: Tony Luck <tony.luck@intel.com>

Documentation/DocBook/mcabook.tmpl

@@ -96,7 +96,7 @@
 
   <chapter id="pubfunctions">
      <title>Public Functions Provided</title>
-!Earch/i386/kernel/mca.c
+!Edrivers/mca/mca-legacy.c
   </chapter>
 
   <chapter id="dmafunctions">

Documentation/IPMI.txt

@@ -605,12 +605,13 @@ is in the ipmi_poweroff module.  When the system requests a powerdown,
 it will send the proper IPMI commands to do this.  This is supported on
 several platforms.
 
-There is a module parameter named "poweroff_control" that may either be zero
-(do a power down) or 2 (do a power cycle, power the system off, then power
-it on in a few seconds).  Setting ipmi_poweroff.poweroff_control=x will do
-the same thing on the kernel command line.  The parameter is also available
-via the proc filesystem in /proc/ipmi/poweroff_control.  Note that if the
-system does not support power cycling, it will always to the power off.
+There is a module parameter named "poweroff_powercycle" that may
+either be zero (do a power down) or non-zero (do a power cycle, power
+the system off, then power it on in a few seconds).  Setting
+ipmi_poweroff.poweroff_control=x will do the same thing on the kernel
+command line.  The parameter is also available via the proc filesystem
+in /proc/sys/dev/ipmi/poweroff_powercycle.  Note that if the system
+does not support power cycling, it will always do the power off.
 
 Note that if you have ACPI enabled, the system will prefer using ACPI to
 power off.

Documentation/RCU/NMI-RCU.txt

@@ -0,0 +1,112 @@
+Using RCU to Protect Dynamic NMI Handlers
+
+
+Although RCU is usually used to protect read-mostly data structures,
+it is possible to use RCU to provide dynamic non-maskable interrupt
+handlers, as well as dynamic irq handlers.  This document describes
+how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer
+work in "arch/i386/oprofile/nmi_timer_int.c" and in
+"arch/i386/kernel/traps.c".
+
+The relevant pieces of code are listed below, each followed by a
+brief explanation.
+
+	static int dummy_nmi_callback(struct pt_regs *regs, int cpu)
+	{
+		return 0;
+	}
+
+The dummy_nmi_callback() function is a "dummy" NMI handler that does
+nothing, but returns zero, thus saying that it did nothing, allowing
+the NMI handler to take the default machine-specific action.
+
+	static nmi_callback_t nmi_callback = dummy_nmi_callback;
+
+This nmi_callback variable is a global function pointer to the current
+NMI handler.
+
+	fastcall void do_nmi(struct pt_regs * regs, long error_code)
+	{
+		int cpu;
+
+		nmi_enter();
+
+		cpu = smp_processor_id();
+		++nmi_count(cpu);
+
+		if (!rcu_dereference(nmi_callback)(regs, cpu))
+			default_do_nmi(regs);
+
+		nmi_exit();
+	}
+
+The do_nmi() function processes each NMI.  It first disables preemption
+in the same way that a hardware irq would, then increments the per-CPU
+count of NMIs.  It then invokes the NMI handler stored in the nmi_callback
+function pointer.  If this handler returns zero, do_nmi() invokes the
+default_do_nmi() function to handle a machine-specific NMI.  Finally,
+preemption is restored.
+
+Strictly speaking, rcu_dereference() is not needed, since this code runs
+only on i386, which does not need rcu_dereference() anyway.  However,
+it is a good documentation aid, particularly for anyone attempting to
+do something similar on Alpha.
+
+Quick Quiz:  Why might the rcu_dereference() be necessary on Alpha,
+	     given that the code referenced by the pointer is read-only?
+
+
+Back to the discussion of NMI and RCU...
+
+	void set_nmi_callback(nmi_callback_t callback)
+	{
+		rcu_assign_pointer(nmi_callback, callback);
+	}
+
+The set_nmi_callback() function registers an NMI handler.  Note that any
+data that is to be used by the callback must be initialized up -before-
+the call to set_nmi_callback().  On architectures that do not order
+writes, the rcu_assign_pointer() ensures that the NMI handler sees the
+initialized values.
+
+	void unset_nmi_callback(void)
+	{
+		rcu_assign_pointer(nmi_callback, dummy_nmi_callback);
+	}
+
+This function unregisters an NMI handler, restoring the original
+dummy_nmi_handler().  However, there may well be an NMI handler
+currently executing on some other CPU.  We therefore cannot free
+up any data structures used by the old NMI handler until execution
+of it completes on all other CPUs.
+
+One way to accomplish this is via synchronize_sched(), perhaps as
+follows:
+
+	unset_nmi_callback();
+	synchronize_sched();
+	kfree(my_nmi_data);
+
+This works because synchronize_sched() blocks until all CPUs complete
+any preemption-disabled segments of code that they were executing.
+Since NMI handlers disable preemption, synchronize_sched() is guaranteed
+not to return until all ongoing NMI handlers exit.  It is therefore safe
+to free up the handler's data as soon as synchronize_sched() returns.
+
+
+Answer to Quick Quiz
+
+	Why might the rcu_dereference() be necessary on Alpha, given
+	that the code referenced by the pointer is read-only?
+
+	Answer: The caller to set_nmi_callback() might well have
+		initialized some data that is to be used by the
+		new NMI handler.  In this case, the rcu_dereference()
+		would be needed, because otherwise a CPU that received
+		an NMI just after the new handler was set might see
+		the pointer to the new NMI handler, but the old
+		pre-initialized version of the handler's data.
+
+		More important, the rcu_dereference() makes it clear
+		to someone reading the code that the pointer is being
+		protected by RCU.

Documentation/acpi-hotkey.txt

@@ -35,4 +35,4 @@ created.  Please use command "cat /proc/acpi/hotkey/polling_method"
 to retrieve it.
 
 Note: Use cmdline "acpi_generic_hotkey" to over-ride
-loading any platform specific drivers.
+platform-specific with generic driver.

Documentation/cdrom/sonycd535

@@ -68,7 +68,8 @@ it a better device citizen.  Further thanks to Joel Katz
 Porfiri Claudio <C.Porfiri@nisms.tei.ericsson.se> for patches
 to make the driver work with the older CDU-510/515 series, and
 Heiko Eissfeldt <heiko@colossus.escape.de> for pointing out that
-the verify_area() checks were ignoring the results of said checks.
+the verify_area() checks were ignoring the results of said checks
+(note: verify_area() has since been replaced by access_ok()).
 
 (Acknowledgments from Ron Jeppesen in the 0.3 release:)
 Thanks to Corey Minyard who wrote the original CDU-31A driver on which

Documentation/cpusets.txt

@@ -60,6 +60,18 @@ all of the cpus in the system. This removes any overhead due to
 load balancing code trying to pull tasks outside of the cpu exclusive
 cpuset only to be prevented by the tasks' cpus_allowed mask.
 
+A cpuset that is mem_exclusive restricts kernel allocations for
+page, buffer and other data commonly shared by the kernel across
+multiple users.  All cpusets, whether mem_exclusive or not, restrict
+allocations of memory for user space.  This enables configuring a
+system so that several independent jobs can share common kernel
+data, such as file system pages, while isolating each jobs user
+allocation in its own cpuset.  To do this, construct a large
+mem_exclusive cpuset to hold all the jobs, and construct child,
+non-mem_exclusive cpusets for each individual job.  Only a small
+amount of typical kernel memory, such as requests from interrupt
+handlers, is allowed to be taken outside even a mem_exclusive cpuset.
+
 User level code may create and destroy cpusets by name in the cpuset
 virtual file system, manage the attributes and permissions of these
 cpusets and which CPUs and Memory Nodes are assigned to each cpuset,

Documentation/dcdbas.txt

@@ -0,0 +1,91 @@
+Overview
+
+The Dell Systems Management Base Driver provides a sysfs interface for
+systems management software such as Dell OpenManage to perform system
+management interrupts and host control actions (system power cycle or
+power off after OS shutdown) on certain Dell systems.
+
+Dell OpenManage requires this driver on the following Dell PowerEdge systems:
+300, 1300, 1400, 400SC, 500SC, 1500SC, 1550, 600SC, 1600SC, 650, 1655MC,
+700, and 750.  Other Dell software such as the open source libsmbios project
+is expected to make use of this driver, and it may include the use of this
+driver on other Dell systems.
+
+The Dell libsmbios project aims towards providing access to as much BIOS
+information as possible.  See http://linux.dell.com/libsmbios/main/ for
+more information about the libsmbios project.
+
+
+System Management Interrupt
+
+On some Dell systems, systems management software must access certain
+management information via a system management interrupt (SMI).  The SMI data
+buffer must reside in 32-bit address space, and the physical address of the
+buffer is required for the SMI.  The driver maintains the memory required for
+the SMI and provides a way for the application to generate the SMI.
+The driver creates the following sysfs entries for systems management
+software to perform these system management interrupts:
+
+/sys/devices/platform/dcdbas/smi_data
+/sys/devices/platform/dcdbas/smi_data_buf_phys_addr
+/sys/devices/platform/dcdbas/smi_data_buf_size
+/sys/devices/platform/dcdbas/smi_request
+
+Systems management software must perform the following steps to execute
+a SMI using this driver:
+
+1) Lock smi_data.
+2) Write system management command to smi_data.
+3) Write "1" to smi_request to generate a calling interface SMI or
+   "2" to generate a raw SMI.
+4) Read system management command response from smi_data.
+5) Unlock smi_data.
+
+
+Host Control Action
+
+Dell OpenManage supports a host control feature that allows the administrator
+to perform a power cycle or power off of the system after the OS has finished
+shutting down.  On some Dell systems, this host control feature requires that
+a driver perform a SMI after the OS has finished shutting down.
+
+The driver creates the following sysfs entries for systems management software
+to schedule the driver to perform a power cycle or power off host control
+action after the system has finished shutting down:
+
+/sys/devices/platform/dcdbas/host_control_action
+/sys/devices/platform/dcdbas/host_control_smi_type
+/sys/devices/platform/dcdbas/host_control_on_shutdown
+
+Dell OpenManage performs the following steps to execute a power cycle or
+power off host control action using this driver:
+
+1) Write host control action to be performed to host_control_action.
+2) Write type of SMI that driver needs to perform to host_control_smi_type.
+3) Write "1" to host_control_on_shutdown to enable host control action.
+4) Initiate OS shutdown.
+   (Driver will perform host control SMI when it is notified that the OS
+   has finished shutting down.)
+
+
+Host Control SMI Type
+
+The following table shows the value to write to host_control_smi_type to
+perform a power cycle or power off host control action:
+
+PowerEdge System    Host Control SMI Type
+----------------    ---------------------
+      300             HC_SMITYPE_TYPE1
+     1300             HC_SMITYPE_TYPE1
+     1400             HC_SMITYPE_TYPE2
+      500SC           HC_SMITYPE_TYPE2
+     1500SC           HC_SMITYPE_TYPE2
+     1550             HC_SMITYPE_TYPE2
+      600SC           HC_SMITYPE_TYPE2
+     1600SC           HC_SMITYPE_TYPE2
+      650             HC_SMITYPE_TYPE2
+     1655MC           HC_SMITYPE_TYPE2
+      700             HC_SMITYPE_TYPE3
+      750             HC_SMITYPE_TYPE3
+
+

Documentation/dell_rbu.txt

@@ -0,0 +1,74 @@
+Purpose:
+Demonstrate the usage of the new open sourced rbu (Remote BIOS Update) driver
+for updating BIOS images on Dell servers and desktops.
+
+Scope:
+This document discusses the functionality of the rbu driver only.
+It does not cover the support needed from aplications to enable the BIOS to
+update itself with the image downloaded in to the memory.
+
+Overview:
+This driver works with Dell OpenManage or Dell Update Packages for updating
+the BIOS on Dell servers (starting from servers sold since 1999), desktops
+and notebooks (starting from those sold in 2005).
+Please go to  http://support.dell.com register and you can find info on
+OpenManage and Dell Update packages (DUP).
+
+Dell_RBU driver supports BIOS update using the monilothic image and packetized
+image methods. In case of moniolithic the driver allocates a contiguous chunk
+of physical pages having the BIOS image. In case of packetized the app
+using the driver breaks the image in to packets of fixed sizes and the driver
+would place each packet in contiguous physical memory. The driver also
+maintains a link list of packets for reading them back.
+If the dell_rbu driver is unloaded all the allocated memory is freed.
+
+The rbu driver needs to have an application which will inform the BIOS to
+enable the update in the next system reboot.
+
+The user should not unload the rbu driver after downloading the BIOS image
+or updating.
+
+The driver load creates the following directories under the /sys file system.
+/sys/class/firmware/dell_rbu/loading
+/sys/class/firmware/dell_rbu/data
+/sys/devices/platform/dell_rbu/image_type
+/sys/devices/platform/dell_rbu/data
+
+The driver supports two types of update mechanism; monolithic and packetized.
+These update mechanism depends upon the BIOS currently running on the system.
+Most of the Dell systems support a monolithic update where the BIOS image is
+copied to a single contiguous block of physical memory.
+In case of packet mechanism the single memory can be broken in smaller chuks
+of contiguous memory and the BIOS image is scattered in these packets.
+
+By default the driver uses monolithic memory for the update type. This can be
+changed to contiguous during the driver load time by specifying the load
+parameter image_type=packet.  This can also be changed later as below
+echo packet > /sys/devices/platform/dell_rbu/image_type
+
+Do the steps below to download the BIOS image.
+1) echo 1 > /sys/class/firmware/dell_rbu/loading
+2) cp bios_image.hdr /sys/class/firmware/dell_rbu/data
+3) echo 0 > /sys/class/firmware/dell_rbu/loading
+
+The /sys/class/firmware/dell_rbu/ entries will remain till the following is
+done.
+echo -1 > /sys/class/firmware/dell_rbu/loading
+
+Until this step is completed the drivr cannot be unloaded.
+
+Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
+read back the image downloaded. This is useful in case of packet update
+mechanism where the above steps 1,2,3 will repeated for every packet.
+By reading the /sys/devices/platform/dell_rbu/data file all packet data
+downloaded can be verified in a single file.
+The packets are arranged in this file one after the other in a FIFO order.
+
+NOTE:
+This driver requires a patch for firmware_class.c which has the addition
+of request_firmware_nowait_nohotplug function to wortk
+Also after updating the BIOS image an user mdoe application neeeds to execute
+code which message the BIOS update request to the BIOS. So on the next reboot
+the BIOS knows about the new image downloaded and it updates it self.
+Also don't unload the rbu drive if the image has to be updated.
+

Documentation/dvb/bt8xx.txt

@@ -16,7 +16,7 @@ Enable the following options:
 "Device drivers" => "Multimedia devices"
  => "Video For Linux" => "BT848 Video For Linux"
 "Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
- => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+ => "DVB for Linux" "DVB Core Support" "BT8xx based PCI cards"
 
 3) Loading Modules, described by two approaches
 ===============================================

Documentation/exception.txt

@@ -7,7 +7,7 @@ To protect itself the kernel has to verify this address.
 
 In older versions of Linux this was done with the 
 int verify_area(int type, const void * addr, unsigned long size) 
-function.
+function (which has since been replaced by access_ok()).
 
 This function verified that the memory area starting at address 
 addr and of size size was accessible for the operation specified 

Documentation/feature-removal-schedule.txt

@@ -51,14 +51,6 @@ Who:	Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
-What:	register_ioctl32_conversion() / unregister_ioctl32_conversion()
-When:	April 2005
-Why:	Replaced by ->compat_ioctl in file_operations and other method
-	vecors.
-Who:	Andi Kleen <ak@muc.de>, Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	RCU API moves to EXPORT_SYMBOL_GPL
 When:	April 2006
 Files:	include/linux/rcupdate.h, kernel/rcupdate.c
@@ -74,14 +66,6 @@ Who:	Paul E. McKenney <paulmck@us.ibm.com>
 
 ---------------------------
 
-What:	remove verify_area()
-When:	July 2006
-Files:	Various uaccess.h headers.
-Why:	Deprecated and redundant. access_ok() should be used instead.
-Who:	Jesper Juhl <juhl-lkml@dif.dk>
-
----------------------------
-
 What:	IEEE1394 Audio and Music Data Transmission Protocol driver,
 	Connection Management Procedures driver
 When:	November 2005

Documentation/filesystems/relayfs.txt

@@ -0,0 +1,362 @@
+
+relayfs - a high-speed data relay filesystem
+============================================
+
+relayfs is a filesystem designed to provide an efficient mechanism for
+tools and facilities to relay large and potentially sustained streams
+of data from kernel space to user space.
+
+The main abstraction of relayfs is the 'channel'.  A channel consists
+of a set of per-cpu kernel buffers each represented by a file in the
+relayfs filesystem.  Kernel clients write into a channel using
+efficient write functions which automatically log to the current cpu's
+channel buffer.  User space applications mmap() the per-cpu files and
+retrieve the data as it becomes available.
+
+The format of the data logged into the channel buffers is completely
+up to the relayfs client; relayfs does however provide hooks which
+allow clients to impose some stucture on the buffer data.  Nor does
+relayfs implement any form of data filtering - this also is left to
+the client.  The purpose is to keep relayfs as simple as possible.
+
+This document provides an overview of the relayfs API.  The details of
+the function parameters are documented along with the functions in the
+filesystem code - please see that for details.
+
+Semantics
+=========
+
+Each relayfs channel has one buffer per CPU, each buffer has one or
+more sub-buffers. Messages are written to the first sub-buffer until
+it is too full to contain a new message, in which case it it is
+written to the next (if available).  Messages are never split across
+sub-buffers.  At this point, userspace can be notified so it empties
+the first sub-buffer, while the kernel continues writing to the next.
+
+When notified that a sub-buffer is full, the kernel knows how many
+bytes of it are padding i.e. unused.  Userspace can use this knowledge
+to copy only valid data.
+
+After copying it, userspace can notify the kernel that a sub-buffer
+has been consumed.
+
+relayfs can operate in a mode where it will overwrite data not yet
+collected by userspace, and not wait for it to consume it.
+
+relayfs itself does not provide for communication of such data between
+userspace and kernel, allowing the kernel side to remain simple and not
+impose a single interface on userspace. It does provide a separate
+helper though, described below.
+
+klog, relay-app & librelay
+==========================
+
+relayfs itself is ready to use, but to make things easier, two
+additional systems are provided.  klog is a simple wrapper to make
+writing formatted text or raw data to a channel simpler, regardless of
+whether a channel to write into exists or not, or whether relayfs is
+compiled into the kernel or is configured as a module.  relay-app is
+the kernel counterpart of userspace librelay.c, combined these two
+files provide glue to easily stream data to disk, without having to
+bother with housekeeping.  klog and relay-app can be used together,
+with klog providing high-level logging functions to the kernel and
+relay-app taking care of kernel-user control and disk-logging chores.
+
+It is possible to use relayfs without relay-app & librelay, but you'll
+have to implement communication between userspace and kernel, allowing
+both to convey the state of buffers (full, empty, amount of padding).
+
+klog, relay-app and librelay can be found in the relay-apps tarball on
+http://relayfs.sourceforge.net
+
+The relayfs user space API
+==========================
+
+relayfs implements basic file operations for user space access to
+relayfs channel buffer data.  Here are the file operations that are
+available and some comments regarding their behavior:
+
+open()	 enables user to open an _existing_ buffer.
+
+mmap()	 results in channel buffer being mapped into the caller's
+	 memory space. Note that you can't do a partial mmap - you must
+	 map the entire file, which is NRBUF * SUBBUFSIZE.
+
+read()	 read the contents of a channel buffer.  The bytes read are
+	 'consumed' by the reader i.e. they won't be available again
+	 to subsequent reads.  If the channel is being used in
+	 no-overwrite mode (the default), it can be read at any time
+	 even if there's an active kernel writer.  If the channel is
+	 being used in overwrite mode and there are active channel
+	 writers, results may be unpredictable - users should make
+	 sure that all logging to the channel has ended before using
+	 read() with overwrite mode.
+
+poll()	 POLLIN/POLLRDNORM/POLLERR supported.  User applications are
+	 notified when sub-buffer boundaries are crossed.
+
+close() decrements the channel buffer's refcount.  When the refcount
+	reaches 0 i.e. when no process or kernel client has the buffer
+	open, the channel buffer is freed.
+
+
+In order for a user application to make use of relayfs files, the
+relayfs filesystem must be mounted.  For example,
+
+	mount -t relayfs relayfs /mnt/relay
+
+NOTE:	relayfs doesn't need to be mounted for kernel clients to create
+	or use channels - it only needs to be mounted when user space
+	applications need access to the buffer data.
+
+
+The relayfs kernel API
+======================
+
+Here's a summary of the API relayfs provides to in-kernel clients:
+
+
+  channel management functions:
+
+    relay_open(base_filename, parent, subbuf_size, n_subbufs,
+               callbacks)
+    relay_close(chan)
+    relay_flush(chan)
+    relay_reset(chan)
+    relayfs_create_dir(name, parent)
+    relayfs_remove_dir(dentry)
+
+  channel management typically called on instigation of userspace:
+
+    relay_subbufs_consumed(chan, cpu, subbufs_consumed)
+
+  write functions:
+
+    relay_write(chan, data, length)
+    __relay_write(chan, data, length)
+    relay_reserve(chan, length)
+
+  callbacks:
+
+    subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
+    buf_mapped(buf, filp)
+    buf_unmapped(buf, filp)
+
+  helper functions:
+
+    relay_buf_full(buf)
+    subbuf_start_reserve(buf, length)
+
+
+Creating a channel
+------------------
+
+relay_open() is used to create a channel, along with its per-cpu
+channel buffers.  Each channel buffer will have an associated file
+created for it in the relayfs filesystem, which can be opened and
+mmapped from user space if desired.  The files are named
+basename0...basenameN-1 where N is the number of online cpus, and by
+default will be created in the root of the filesystem.  If you want a
+directory structure to contain your relayfs files, you can create it
+with relayfs_create_dir() and pass the parent directory to
+relay_open().  Clients are responsible for cleaning up any directory
+structure they create when the channel is closed - use
+relayfs_remove_dir() for that.
+
+The total size of each per-cpu buffer is calculated by multiplying the
+number of sub-buffers by the sub-buffer size passed into relay_open().
+The idea behind sub-buffers is that they're basically an extension of
+double-buffering to N buffers, and they also allow applications to
+easily implement random-access-on-buffer-boundary schemes, which can
+be important for some high-volume applications.  The number and size
+of sub-buffers is completely dependent on the application and even for
+the same application, different conditions will warrant different
+values for these parameters at different times.  Typically, the right
+values to use are best decided after some experimentation; in general,
+though, it's safe to assume that having only 1 sub-buffer is a bad
+idea - you're guaranteed to either overwrite data or lose events
+depending on the channel mode being used.
+
+Channel 'modes'
+---------------
+
+relayfs channels can be used in either of two modes - 'overwrite' or
+'no-overwrite'.  The mode is entirely determined by the implementation
+of the subbuf_start() callback, as described below.  In 'overwrite'
+mode, also known as 'flight recorder' mode, writes continuously cycle
+around the buffer and will never fail, but will unconditionally
+overwrite old data regardless of whether it's actually been consumed.
+In no-overwrite mode, writes will fail i.e. data will be lost, if the
+number of unconsumed sub-buffers equals the total number of
+sub-buffers in the channel.  It should be clear that if there is no
+consumer or if the consumer can't consume sub-buffers fast enought,
+data will be lost in either case; the only difference is whether data
+is lost from the beginning or the end of a buffer.
+
+As explained above, a relayfs channel is made of up one or more
+per-cpu channel buffers, each implemented as a circular buffer
+subdivided into one or more sub-buffers.  Messages are written into
+the current sub-buffer of the channel's current per-cpu buffer via the
+write functions described below.  Whenever a message can't fit into
+the current sub-buffer, because there's no room left for it, the
+client is notified via the subbuf_start() callback that a switch to a
+new sub-buffer is about to occur.  The client uses this callback to 1)
+initialize the next sub-buffer if appropriate 2) finalize the previous
+sub-buffer if appropriate and 3) return a boolean value indicating
+whether or not to actually go ahead with the sub-buffer switch.
+
+To implement 'no-overwrite' mode, the userspace client would provide
+an implementation of the subbuf_start() callback something like the
+following:
+
+static int subbuf_start(struct rchan_buf *buf,
+                        void *subbuf,
+			void *prev_subbuf,
+			unsigned int prev_padding)
+{
+	if (prev_subbuf)
+		*((unsigned *)prev_subbuf) = prev_padding;
+
+	if (relay_buf_full(buf))
+		return 0;
+
+	subbuf_start_reserve(buf, sizeof(unsigned int));
+
+	return 1;
+}
+
+If the current buffer is full i.e. all sub-buffers remain unconsumed,
+the callback returns 0 to indicate that the buffer switch should not
+occur yet i.e. until the consumer has had a chance to read the current
+set of ready sub-buffers.  For the relay_buf_full() function to make
+sense, the consumer is reponsible for notifying relayfs when
+sub-buffers have been consumed via relay_subbufs_consumed().  Any
+subsequent attempts to write into the buffer will again invoke the
+subbuf_start() callback with the same parameters; only when the
+consumer has consumed one or more of the ready sub-buffers will
+relay_buf_full() return 0, in which case the buffer switch can
+continue.
+
+The implementation of the subbuf_start() callback for 'overwrite' mode
+would be very similar:
+
+static int subbuf_start(struct rchan_buf *buf,
+                        void *subbuf,
+			void *prev_subbuf,
+			unsigned int prev_padding)
+{
+	if (prev_subbuf)
+		*((unsigned *)prev_subbuf) = prev_padding;
+
+	subbuf_start_reserve(buf, sizeof(unsigned int));
+
+	return 1;
+}
+
+In this case, the relay_buf_full() check is meaningless and the
+callback always returns 1, causing the buffer switch to occur
+unconditionally.  It's also meaningless for the client to use the
+relay_subbufs_consumed() function in this mode, as it's never
+consulted.
+
+The default subbuf_start() implementation, used if the client doesn't
+define any callbacks, or doesn't define the subbuf_start() callback,
+implements the simplest possible 'no-overwrite' mode i.e. it does
+nothing but return 0.
+
+Header information can be reserved at the beginning of each sub-buffer
+by calling the subbuf_start_reserve() helper function from within the
+subbuf_start() callback.  This reserved area can be used to store
+whatever information the client wants.  In the example above, room is
+reserved in each sub-buffer to store the padding count for that
+sub-buffer.  This is filled in for the previous sub-buffer in the
+subbuf_start() implementation; the padding value for the previous
+sub-buffer is passed into the subbuf_start() callback along with a
+pointer to the previous sub-buffer, since the padding value isn't
+known until a sub-buffer is filled.  The subbuf_start() callback is
+also called for the first sub-buffer when the channel is opened, to
+give the client a chance to reserve space in it.  In this case the
+previous sub-buffer pointer passed into the callback will be NULL, so
+the client should check the value of the prev_subbuf pointer before
+writing into the previous sub-buffer.
+
+Writing to a channel
+--------------------
+
+kernel clients write data into the current cpu's channel buffer using
+relay_write() or __relay_write().  relay_write() is the main logging
+function - it uses local_irqsave() to protect the buffer and should be
+used if you might be logging from interrupt context.  If you know
+you'll never be logging from interrupt context, you can use
+__relay_write(), which only disables preemption.  These functions
+don't return a value, so you can't determine whether or not they
+failed - the assumption is that you wouldn't want to check a return
+value in the fast logging path anyway, and that they'll always succeed
+unless the buffer is full and no-overwrite mode is being used, in
+which case you can detect a failed write in the subbuf_start()
+callback by calling the relay_buf_full() helper function.
+
+relay_reserve() is used to reserve a slot in a channel buffer which
+can be written to later.  This would typically be used in applications
+that need to write directly into a channel buffer without having to
+stage data in a temporary buffer beforehand.  Because the actual write
+may not happen immediately after the slot is reserved, applications
+using relay_reserve() can keep a count of the number of bytes actually
+written, either in space reserved in the sub-buffers themselves or as
+a separate array.  See the 'reserve' example in the relay-apps tarball
+at http://relayfs.sourceforge.net for an example of how this can be
+done.  Because the write is under control of the client and is
+separated from the reserve, relay_reserve() doesn't protect the buffer
+at all - it's up to the client to provide the appropriate
+synchronization when using relay_reserve().
+
+Closing a channel
+-----------------
+
+The client calls relay_close() when it's finished using the channel.
+The channel and its associated buffers are destroyed when there are no
+longer any references to any of the channel buffers.  relay_flush()
+forces a sub-buffer switch on all the channel buffers, and can be used
+to finalize and process the last sub-buffers before the channel is
+closed.
+
+Misc
+----
+
+Some applications may want to keep a channel around and re-use it
+rather than open and close a new channel for each use.  relay_reset()
+can be used for this purpose - it resets a channel to its initial
+state without reallocating channel buffer memory or destroying
+existing mappings.  It should however only be called when it's safe to
+do so i.e. when the channel isn't currently being written to.
+
+Finally, there are a couple of utility callbacks that can be used for
+different purposes.  buf_mapped() is called whenever a channel buffer
+is mmapped from user space and buf_unmapped() is called when it's
+unmapped.  The client can use this notification to trigger actions
+within the kernel application, such as enabling/disabling logging to
+the channel.
+
+
+Resources
+=========
+
+For news, example code, mailing list, etc. see the relayfs homepage:
+
+    http://relayfs.sourceforge.net
+
+
+Credits
+=======
+
+The ideas and specs for relayfs came about as a result of discussions
+on tracing involving the following:
+
+Michel Dagenais		<michel.dagenais@polymtl.ca>
+Richard Moore		<richardj_moore@uk.ibm.com>
+Bob Wisniewski		<bob@watson.ibm.com>
+Karim Yaghmour		<karim@opersys.com>
+Tom Zanussi		<zanussi@us.ibm.com>
+
+Also thanks to Hubertus Franke for a lot of useful suggestions and bug
+reports.

Documentation/i386/boot.txt

@@ -2,7 +2,7 @@
 		     ----------------------------
 
 		    H. Peter Anvin <hpa@zytor.com>
-			Last update 2002-01-01
+			Last update 2005-09-02
 
 On the i386 platform, the Linux kernel uses a rather complicated boot
 convention.  This has evolved partially due to historical aspects, as
@@ -34,6 +34,8 @@ Protocol 2.02:	(Kernel 2.4.0-test3-pre3) New command line protocol.
 Protocol 2.03:	(Kernel 2.4.18-pre1) Explicitly makes the highest possible
 		initrd address available to the bootloader.
 
+Protocol 2.04:	(Kernel 2.6.14) Extend the syssize field to four bytes.
+
 
 **** MEMORY LAYOUT
 
@@ -103,10 +105,9 @@ The header looks like:
 Offset	Proto	Name		Meaning
 /Size
 
-01F1/1	ALL	setup_sects	The size of the setup in sectors
+01F1/1	ALL(1	setup_sects	The size of the setup in sectors
 01F2/2	ALL	root_flags	If set, the root is mounted readonly
-01F4/2	ALL	syssize		DO NOT USE - for bootsect.S use only
-01F6/2	ALL	swap_dev	DO NOT USE - obsolete
+01F4/4	2.04+(2	syssize		The size of the 32-bit code in 16-byte paras
 01F8/2	ALL	ram_size	DO NOT USE - for bootsect.S use only
 01FA/2	ALL	vid_mode	Video mode control
 01FC/2	ALL	root_dev	Default root device number
@@ -129,8 +130,12 @@ Offset	Proto	Name		Meaning
 0228/4	2.02+	cmd_line_ptr	32-bit pointer to the kernel command line
 022C/4	2.03+	initrd_addr_max	Highest legal initrd address
 
-For backwards compatibility, if the setup_sects field contains 0, the
-real value is 4.
+(1) For backwards compatibility, if the setup_sects field contains 0, the
+    real value is 4.
+
+(2) For boot protocol prior to 2.04, the upper two bytes of the syssize
+    field are unusable, which means the size of a bzImage kernel
+    cannot be determined.
 
 If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
 the boot protocol version is "old".  Loading an old kernel, the
@@ -230,12 +235,16 @@ loader to communicate with the kernel.  Some of its options are also
 relevant to the boot loader itself, see "special command line options"
 below.
 
-The kernel command line is a null-terminated string up to 255
-characters long, plus the final null.
+The kernel command line is a null-terminated string currently up to
+255 characters long, plus the final null.  A string that is too long
+will be automatically truncated by the kernel, a boot loader may allow
+a longer command line to be passed to permit future kernels to extend
+this limit.
 
 If the boot protocol version is 2.02 or later, the address of the
 kernel command line is given by the header field cmd_line_ptr (see
-above.)
+above.)  This address can be anywhere between the end of the setup
+heap and 0xA0000.
 
 If the protocol version is *not* 2.02 or higher, the kernel
 command line is entered using the following protocol:
@@ -255,7 +264,7 @@ command line is entered using the following protocol:
 **** SAMPLE BOOT CONFIGURATION
 
 As a sample configuration, assume the following layout of the real
-mode segment:
+mode segment (this is a typical, and recommended layout):
 
 	0x0000-0x7FFF	Real mode kernel
 	0x8000-0x8FFF	Stack and heap
@@ -312,9 +321,9 @@ Such a boot loader should enter the following fields in the header:
 
 **** LOADING THE REST OF THE KERNEL
 
-The non-real-mode kernel starts at offset (setup_sects+1)*512 in the
-kernel file (again, if setup_sects == 0 the real value is 4.)  It
-should be loaded at address 0x10000 for Image/zImage kernels and
+The 32-bit (non-real-mode) kernel starts at offset (setup_sects+1)*512
+in the kernel file (again, if setup_sects == 0 the real value is 4.)
+It should be loaded at address 0x10000 for Image/zImage kernels and
 0x100000 for bzImage kernels.
 
 The kernel is a bzImage kernel if the protocol >= 2.00 and the 0x01

Documentation/ibm-acpi.txt

@@ -1,16 +1,16 @@
 		    IBM ThinkPad ACPI Extras Driver
 
-                            Version 0.8
-                          8 November 2004
+                            Version 0.12
+                           17 August 2005
 
                Borislav Deianov <borislav@users.sf.net>
 		      http://ibm-acpi.sf.net/
 
 
-This is a Linux ACPI driver for the IBM ThinkPad laptops. It aims to
-support various features of these laptops which are accessible through
-the ACPI framework but not otherwise supported by the generic Linux
-ACPI drivers.
+This is a Linux ACPI driver for the IBM ThinkPad laptops. It supports
+various features of these laptops which are accessible through the
+ACPI framework but not otherwise supported by the generic Linux ACPI
+drivers.
 
 
 Status
@@ -25,9 +25,14 @@ detailed description):
 	- ThinkLight on and off
 	- limited docking and undocking
 	- UltraBay eject
-	- Experimental: CMOS control
-	- Experimental: LED control
-	- Experimental: ACPI sounds
+	- CMOS control
+	- LED control
+	- ACPI sounds
+	- temperature sensors
+	- Experimental: embedded controller register dump
+	- Experimental: LCD brightness control
+	- Experimental: volume control
+	- Experimental: fan speed, fan enable/disable
 
 A compatibility table by model and feature is maintained on the web
 site, http://ibm-acpi.sf.net/. I appreciate any success or failure
@@ -91,12 +96,12 @@ driver is still in the alpha stage, the exact proc file format and
 commands supported by the various features is guaranteed to change
 frequently.
 
-Driver Version -- /proc/acpi/ibm/driver
---------------------------------------
+Driver version -- /proc/acpi/ibm/driver
+---------------------------------------
 
 The driver name and version. No commands can be written to this file.
 
-Hot Keys -- /proc/acpi/ibm/hotkey
+Hot keys -- /proc/acpi/ibm/hotkey
 ---------------------------------
 
 Without this driver, only the Fn-F4 key (sleep button) generates an
@@ -188,7 +193,7 @@ and, on the X40, video corruption. By disabling automatic switching,
 the flickering or video corruption can be avoided.
 
 The video_switch command cycles through the available video outputs
-(it sumulates the behavior of Fn-F7).
+(it simulates the behavior of Fn-F7).
 
 Video expansion can be toggled through this feature. This controls
 whether the display is expanded to fill the entire LCD screen when a
@@ -201,6 +206,12 @@ Fn-F7 from working. This also disables the video output switching
 features of this driver, as it uses the same ACPI methods as
 Fn-F7. Video switching on the console should still work.
 
+UPDATE: There's now a patch for the X.org Radeon driver which
+addresses this issue. Some people are reporting success with the patch
+while others are still having problems. For more information:
+
+https://bugs.freedesktop.org/show_bug.cgi?id=2000
+
 ThinkLight control -- /proc/acpi/ibm/light
 ------------------------------------------
 
@@ -211,7 +222,7 @@ models which do not make the status available will show it as
 	echo on  > /proc/acpi/ibm/light
 	echo off > /proc/acpi/ibm/light
 
-Docking / Undocking -- /proc/acpi/ibm/dock
+Docking / undocking -- /proc/acpi/ibm/dock
 ------------------------------------------
 
 Docking and undocking (e.g. with the X4 UltraBase) requires some
@@ -228,11 +239,15 @@ NOTE: These events will only be generated if the laptop was docked
 when originally booted. This is due to the current lack of support for
 hot plugging of devices in the Linux ACPI framework. If the laptop was
 booted while not in the dock, the following message is shown in the
-logs: "ibm_acpi: dock device not present". No dock-related events are
-generated but the dock and undock commands described below still
-work. They can be executed manually or triggered by Fn key
-combinations (see the example acpid configuration files included in
-the driver tarball package available on the web site).
+logs:
+
+	Mar 17 01:42:34 aero kernel: ibm_acpi: dock device not present
+
+In this case, no dock-related events are generated but the dock and
+undock commands described below still work. They can be executed
+manually or triggered by Fn key combinations (see the example acpid
+configuration files included in the driver tarball package available
+on the web site).
 
 When the eject request button on the dock is pressed, the first event
 above is generated. The handler for this event should issue the
@@ -267,7 +282,7 @@ the only docking stations currently supported are the X-series
 UltraBase docks and "dumb" port replicators like the Mini Dock (the
 latter don't need any ACPI support, actually).
 
-UltraBay Eject -- /proc/acpi/ibm/bay
+UltraBay eject -- /proc/acpi/ibm/bay
 ------------------------------------
 
 Inserting or ejecting an UltraBay device requires some actions to be
@@ -284,8 +299,11 @@ when the laptop was originally booted (on the X series, the UltraBay
 is in the dock, so it may not be present if the laptop was undocked).
 This is due to the current lack of support for hot plugging of devices
 in the Linux ACPI framework. If the laptop was booted without the
-UltraBay, the following message is shown in the logs: "ibm_acpi: bay
-device not present". No bay-related events are generated but the eject
+UltraBay, the following message is shown in the logs:
+
+	Mar 17 01:42:34 aero kernel: ibm_acpi: bay device not present
+
+In this case, no bay-related events are generated but the eject
 command described below still works. It can be executed manually or
 triggered by a hot key combination.
 
@@ -306,22 +324,33 @@ necessary to enable the UltraBay device (e.g. call idectl).
 The contents of the /proc/acpi/ibm/bay file shows the current status
 of the UltraBay, as provided by the ACPI framework.
 
-Experimental Features
----------------------
+EXPERIMENTAL warm eject support on the 600e/x, A22p and A3x (To use
+this feature, you need to supply the experimental=1 parameter when
+loading the module):
+
+These models do not have a button near the UltraBay device to request
+a hot eject but rather require the laptop to be put to sleep
+(suspend-to-ram) before the bay device is ejected or inserted).
+The sequence of steps to eject the device is as follows:
+
+	echo eject > /proc/acpi/ibm/bay
+	put the ThinkPad to sleep
+	remove the drive
+	resume from sleep
+	cat /proc/acpi/ibm/bay should show that the drive was removed
+
+On the A3x, both the UltraBay 2000 and UltraBay Plus devices are
+supported. Use "eject2" instead of "eject" for the second bay.
 
-The following features are marked experimental because using them
-involves guessing the correct values of some parameters. Guessing
-incorrectly may have undesirable effects like crashing your
-ThinkPad. USE THESE WITH CAUTION! To activate them, you'll need to
-supply the experimental=1 parameter when loading the module.
+Note: the UltraBay eject support on the 600e/x, A22p and A3x is
+EXPERIMENTAL and may not work as expected. USE WITH CAUTION!
 
-Experimental: CMOS control - /proc/acpi/ibm/cmos
-------------------------------------------------
+CMOS control -- /proc/acpi/ibm/cmos
+-----------------------------------
 
 This feature is used internally by the ACPI firmware to control the
-ThinkLight on most newer ThinkPad models. It appears that it can also
-control LCD brightness, sounds volume and more, but only on some
-models.
+ThinkLight on most newer ThinkPad models. It may also control LCD
+brightness, sounds volume and more, but only on some models.
 
 The commands are non-negative integer numbers:
 
@@ -330,10 +359,9 @@ The commands are non-negative integer numbers:
 	echo 2 >/proc/acpi/ibm/cmos
 	...
 
-The range of numbers which are used internally by various models is 0
-to 21, but it's possible that numbers outside this range have
-interesting behavior. Here is the behavior on the X40 (tpb is the
-ThinkPad Buttons utility):
+The range of valid numbers is 0 to 21, but not all have an effect and
+the behavior varies from model to model. Here is the behavior on the
+X40 (tpb is the ThinkPad Buttons utility):
 
 	0 - no effect but tpb reports "Volume down"
 	1 - no effect but tpb reports "Volume up"
@@ -346,26 +374,18 @@ ThinkPad Buttons utility):
 	13 - ThinkLight off
 	14 - no effect but tpb reports ThinkLight status change
 
-If you try this feature, please send me a report similar to the
-above. On models which allow control of LCD brightness or sound
-volume, I'd like to provide this functionality in an user-friendly
-way, but first I need a way to identify the models which this is
-possible.
-
-Experimental: LED control - /proc/acpi/ibm/LED
-----------------------------------------------
+LED control -- /proc/acpi/ibm/led
+---------------------------------
 
 Some of the LED indicators can be controlled through this feature. The
 available commands are:
 
-	echo <led number> on >/proc/acpi/ibm/led
-	echo <led number> off >/proc/acpi/ibm/led
-	echo <led number> blink >/proc/acpi/ibm/led
+	echo '<led number> on' >/proc/acpi/ibm/led
+	echo '<led number> off' >/proc/acpi/ibm/led
+	echo '<led number> blink' >/proc/acpi/ibm/led
 
-The <led number> parameter is a non-negative integer. The range of LED
-numbers used internally by various models is 0 to 7 but it's possible
-that numbers outside this range are also valid. Here is the mapping on
-the X40:
+The <led number> range is 0 to 7. The set of LEDs that can be
+controlled varies from model to model. Here is the mapping on the X40:
 
 	0 - power
 	1 - battery (orange)
@@ -376,49 +396,224 @@ the X40:
 
 All of the above can be turned on and off and can be made to blink.
 
-If you try this feature, please send me a report similar to the
-above. I'd like to provide this functionality in an user-friendly way,
-but first I need to identify the which numbers correspond to which
-LEDs on various models.
-
-Experimental: ACPI sounds - /proc/acpi/ibm/beep
------------------------------------------------
+ACPI sounds -- /proc/acpi/ibm/beep
+----------------------------------
 
 The BEEP method is used internally by the ACPI firmware to provide
-audible alerts in various situtation. This feature allows the same
+audible alerts in various situations. This feature allows the same
 sounds to be triggered manually.
 
 The commands are non-negative integer numbers:
 
-	echo 0 >/proc/acpi/ibm/beep
-	echo 1 >/proc/acpi/ibm/beep
-	echo 2 >/proc/acpi/ibm/beep
-	...
+	echo <number> >/proc/acpi/ibm/beep
 
-The range of numbers which are used internally by various models is 0
-to 17, but it's possible that numbers outside this range are also
-valid. Here is the behavior on the X40:
+The valid <number> range is 0 to 17. Not all numbers trigger sounds
+and the sounds vary from model to model. Here is the behavior on the
+X40:
 
-	2 - two beeps, pause, third beep
+	0 - stop a sound in progress (but use 17 to stop 16)
+	2 - two beeps, pause, third beep ("low battery")
 	3 - single beep
-	4 - "unable"	
+	4 - high, followed by low-pitched beep ("unable")
 	5 - single beep
-	6 - "AC/DC"
+	6 - very high, followed by high-pitched beep ("AC/DC")
 	7 - high-pitched beep
 	9 - three short beeps
 	10 - very long beep
 	12 - low-pitched beep
+	15 - three high-pitched beeps repeating constantly, stop with 0
+	16 - one medium-pitched beep repeating constantly, stop with 17
+	17 - stop 16
+
+Temperature sensors -- /proc/acpi/ibm/thermal
+---------------------------------------------
+
+Most ThinkPads include six or more separate temperature sensors but
+only expose the CPU temperature through the standard ACPI methods.
+This feature shows readings from up to eight different sensors. Some
+readings may not be valid, e.g. may show large negative values. For
+example, on the X40, a typical output may be:
+
+temperatures:   42 42 45 41 36 -128 33 -128
+
+Thomas Gruber took his R51 apart and traced all six active sensors in
+his laptop (the location of sensors may vary on other models):
+
+1:  CPU
+2:  Mini PCI Module
+3:  HDD
+4:  GPU
+5:  Battery
+6:  N/A
+7:  Battery
+8:  N/A
+
+No commands can be written to this file.
+
+EXPERIMENTAL: Embedded controller reigster dump -- /proc/acpi/ibm/ecdump
+------------------------------------------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature dumps the values of 256 embedded controller
+registers. Values which have changed since the last time the registers
+were dumped are marked with a star:
+
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump 
+EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
+EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
+EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
+EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
+EC 0x30:  01  07  1a  00  30  04  00  00 *85  00  00  10  00  50  00  00
+EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
+EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03 *bc *02 *bc
+EC 0x60: *02 *bc *02  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0x70:  00  00  00  00  00  12  30  40 *24 *26 *2c *27 *20  80 *1f  80
+EC 0x80:  00  00  00  06 *37 *0e  03  00  00  00  0e  07  00  00  00  00
+EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xa0: *ff  09  ff  09  ff  ff *64  00 *00 *00 *a2  41 *ff *ff *e0  00
+EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
+EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
+
+This feature can be used to determine the register holding the fan
+speed on some models. To do that, do the following:
+
+	- make sure the battery is fully charged
+	- make sure the fan is running
+	- run 'cat /proc/acpi/ibm/ecdump' several times, once per second or so
+
+The first step makes sure various charging-related values don't
+vary. The second ensures that the fan-related values do vary, since
+the fan speed fluctuates a bit. The third will (hopefully) mark the
+fan register with a star:
+
+[root@x40 ibm-acpi]# cat /proc/acpi/ibm/ecdump 
+EC       +00 +01 +02 +03 +04 +05 +06 +07 +08 +09 +0a +0b +0c +0d +0e +0f
+EC 0x00:  a7  47  87  01  fe  96  00  08  01  00  cb  00  00  00  40  00
+EC 0x10:  00  00  ff  ff  f4  3c  87  09  01  ff  42  01  ff  ff  0d  00
+EC 0x20:  00  00  00  00  00  00  00  00  00  00  00  03  43  00  00  80
+EC 0x30:  01  07  1a  00  30  04  00  00  85  00  00  10  00  50  00  00
+EC 0x40:  00  00  00  00  00  00  14  01  00  04  00  00  00  00  00  00
+EC 0x50:  00  c0  02  0d  00  01  01  02  02  03  03  03  03  bc  02  bc
+EC 0x60:  02  bc  02  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0x70:  00  00  00  00  00  12  30  40  24  27  2c  27  21  80  1f  80
+EC 0x80:  00  00  00  06 *be  0d  03  00  00  00  0e  07  00  00  00  00
+EC 0x90:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xa0:  ff  09  ff  09  ff  ff  64  00  00  00  a2  41  ff  ff  e0  00
+EC 0xb0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xc0:  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xd0:  03  00  00  00  00  00  00  00  00  00  00  00  00  00  00  00
+EC 0xe0:  00  00  00  00  00  00  00  00  11  20  49  04  24  06  55  03
+EC 0xf0:  31  55  48  54  35  38  57  57  08  2f  45  73  07  65  6c  1a
+
+Another set of values that varies often is the temperature
+readings. Since temperatures don't change vary fast, you can take
+several quick dumps to eliminate them.
+
+You can use a similar method to figure out the meaning of other
+embedded controller registers - e.g. make sure nothing else changes
+except the charging or discharging battery to determine which
+registers contain the current battery capacity, etc. If you experiment
+with this, do send me your results (including some complete dumps with
+a description of the conditions when they were taken.)
+
+EXPERIMENTAL: LCD brightness control -- /proc/acpi/ibm/brightness
+-----------------------------------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature allows software control of the LCD brightness on ThinkPad
+models which don't have a hardware brightness slider. The available
+commands are:
+
+	echo up   >/proc/acpi/ibm/brightness
+	echo down >/proc/acpi/ibm/brightness
+	echo 'level <level>' >/proc/acpi/ibm/brightness
+
+The <level> number range is 0 to 7, although not all of them may be
+distinct. The current brightness level is shown in the file.
+
+EXPERIMENTAL: Volume control -- /proc/acpi/ibm/volume
+-----------------------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature allows volume control on ThinkPad models which don't have
+a hardware volume knob. The available commands are:
+
+	echo up   >/proc/acpi/ibm/volume
+	echo down >/proc/acpi/ibm/volume
+	echo mute >/proc/acpi/ibm/volume
+	echo 'level <level>' >/proc/acpi/ibm/volume
+
+The <level> number range is 0 to 15 although not all of them may be
+distinct. The unmute the volume after the mute command, use either the
+up or down command (the level command will not unmute the volume).
+The current volume level and mute state is shown in the file.
+
+EXPERIMENTAL: fan speed, fan enable/disable -- /proc/acpi/ibm/fan
+-----------------------------------------------------------------
+
+This feature is marked EXPERIMENTAL because the implementation
+directly accesses hardware registers and may not work as expected. USE
+WITH CAUTION! To use this feature, you need to supply the
+experimental=1 parameter when loading the module.
+
+This feature attempts to show the current fan speed. The speed is read
+directly from the hardware registers of the embedded controller. This
+is known to work on later R, T and X series ThinkPads but may show a
+bogus value on other models.
+
+The fan may be enabled or disabled with the following commands:
+
+	echo enable  >/proc/acpi/ibm/fan
+	echo disable >/proc/acpi/ibm/fan
+
+WARNING WARNING WARNING: do not leave the fan disabled unless you are
+monitoring the temperature sensor readings and you are ready to enable
+it if necessary to avoid overheating.
+
+The fan only runs if it's enabled *and* the various temperature
+sensors which control it read high enough. On the X40, this seems to
+depend on the CPU and HDD temperatures. Specifically, the fan is
+turned on when either the CPU temperature climbs to 56 degrees or the
+HDD temperature climbs to 46 degrees. The fan is turned off when the
+CPU temperature drops to 49 degrees and the HDD temperature drops to
+41 degrees. These thresholds cannot currently be controlled.
+
+On the X31 and X40 (and ONLY on those models), the fan speed can be
+controlled to a certain degree. Once the fan is running, it can be
+forced to run faster or slower with the following command:
+
+	echo 'speed <speed>' > /proc/acpi/ibm/thermal
+
+The sustainable range of fan speeds on the X40 appears to be from
+about 3700 to about 7350. Values outside this range either do not have
+any effect or the fan speed eventually settles somewhere in that
+range. The fan cannot be stopped or started with this command.
+
+On the 570, temperature readings are not available through this
+feature and the fan control works a little differently. The fan speed
+is reported in levels from 0 (off) to 7 (max) and can be controlled
+with the following command:
 
-(I've only been able to identify a couple of them).
-
-If you try this feature, please send me a report similar to the
-above. I'd like to provide this functionality in an user-friendly way,
-but first I need to identify the which numbers correspond to which
-sounds on various models.
+	echo 'level <level>' > /proc/acpi/ibm/thermal
 
 
-Multiple Command, Module Parameters
------------------------------------
+Multiple Commands, Module Parameters
+------------------------------------
 
 Multiple commands can be written to the proc files in one shot by
 separating them with commas, for example:
@@ -451,24 +646,19 @@ scripts (included with ibm-acpi for completeness):
 	/usr/local/sbin/laptop_mode -- from the Linux kernel source
 		distribution, see Documentation/laptop-mode.txt
 	/sbin/service -- comes with Redhat/Fedora distributions
+	/usr/sbin/hibernate -- from the Software Suspend 2 distribution,
+		see http://softwaresuspend.berlios.de/
 
-Toan T Nguyen <ntt@control.uchicago.edu> has written a SuSE powersave
-script for the X20, included in config/usr/sbin/ibm_hotkeys_X20
+Toan T Nguyen <ntt@physics.ucla.edu> notes that Suse uses the
+powersave program to suspend ('powersave --suspend-to-ram') or
+hibernate ('powersave --suspend-to-disk'). This means that the
+hibernate script is not needed on that distribution.
 
 Henrik Brix Andersen <brix@gentoo.org> has written a Gentoo ACPI event
 handler script for the X31. You can get the latest version from
 http://dev.gentoo.org/~brix/files/x31.sh
 
 David Schweikert <dws@ee.eth.ch> has written an alternative blank.sh
-script which works on Debian systems, included in
-configs/etc/acpi/actions/blank-debian.sh
-
-
-TODO
-----
-
-I'd like to implement the following features but haven't yet found the
-time and/or I don't yet know how to implement them:
-
-- UltraBay floppy drive support
-
+script which works on Debian systems. This scripts has now been
+extended to also work on Fedora systems and included as the default
+blank.sh in the distribution.

Documentation/kernel-parameters.txt

@@ -1174,6 +1174,11 @@ running once the system is up.
 			New name for the ramdisk parameter.
 			See Documentation/ramdisk.txt.
 
+	rdinit=		[KNL]
+			Format: <full_path>
+			Run specified binary instead of /init from the ramdisk,
+			used for early userspace startup. See initrd.
+
 	reboot=		[BUGS=IA-32,BUGS=ARM,BUGS=IA-64] Rebooting mode
 			Format: <reboot_mode>[,<reboot_mode2>[,...]]
 			See arch/*/kernel/reboot.c.

Documentation/power/swsusp.txt

@@ -1,22 +1,20 @@
-From kernel/suspend.c:
+Some warnings, first.
 
  * BIG FAT WARNING *********************************************************
  *
- * If you have unsupported (*) devices using DMA...
- *				...say goodbye to your data.
- *
  * If you touch anything on disk between suspend and resume...
  *				...kiss your data goodbye.
  *
- * If your disk driver does not support suspend... (IDE does)
- *				...you'd better find out how to get along
- *				   without your data.
- *
- * If you change kernel command line between suspend and resume...
- *			        ...prepare for nasty fsck or worse.
+ * If you do resume from initrd after your filesystems are mounted...
+ *				...bye bye root partition.
+ *			[this is actually same case as above]
  *
- * If you change your hardware while system is suspended...
- *			        ...well, it was not good idea.
+ * If you have unsupported (*) devices using DMA, you may have some
+ * problems. If your disk driver does not support suspend... (IDE does),
+ * it may cause some problems, too. If you change kernel command line
+ * between suspend and resume, it may do something wrong. If you change
+ * your hardware while system is suspended... well, it was not good idea;
+ * but it will probably only crash.
  *
  * (*) suspend/resume support is needed to make it safe.
 
@@ -30,6 +28,13 @@ echo shutdown > /sys/power/disk; echo disk > /sys/power/state
 echo platform > /sys/power/disk; echo disk > /sys/power/state
 
 
+Encrypted suspend image:
+------------------------
+If you want to store your suspend image encrypted with a temporary
+key to prevent data gathering after resume you must compile
+crypto and the aes algorithm into the kernel - modules won't work
+as they cannot be loaded at resume time.
+
 
 Article about goals and implementation of Software Suspend for Linux
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -85,11 +90,6 @@ resume.
 You have your server on UPS. Power died, and UPS is indicating 30
 seconds to failure. What do you do? Suspend to disk.
 
-Ethernet card in your server died. You want to replace it. Your
-server is not hotplug capable. What do you do? Suspend to disk,
-replace ethernet card, resume. If you are fast your users will not
-even see broken connections.
-
 
 Q: Maybe I'm missing something, but why don't the regular I/O paths work?
 
@@ -117,31 +117,6 @@ Q: Does linux support ACPI S4?
 
 A: Yes. That's what echo platform > /sys/power/disk does.
 
-Q: My machine doesn't work with ACPI. How can I use swsusp than ?
-
-A: Do a reboot() syscall with right parameters. Warning: glibc gets in
-its way, so check with strace:
-
-reboot(LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2, 0xd000fce2)
-
-(Thanks to Peter Osterlund:)
-
-#include <unistd.h>
-#include <syscall.h>
-
-#define LINUX_REBOOT_MAGIC1     0xfee1dead
-#define LINUX_REBOOT_MAGIC2     672274793
-#define LINUX_REBOOT_CMD_SW_SUSPEND     0xD000FCE2
-
-int main()
-{
-    syscall(SYS_reboot, LINUX_REBOOT_MAGIC1, LINUX_REBOOT_MAGIC2,
-            LINUX_REBOOT_CMD_SW_SUSPEND, 0);
-    return 0;
-}
-
-Also /sys/ interface should be still present.
-
 Q: What is 'suspend2'?
 
 A: suspend2 is 'Software Suspend 2', a forked implementation of
@@ -312,9 +287,45 @@ system is shut down or suspended. Additionally use the encrypted
 suspend image to prevent sensitive data from being stolen after
 resume.
 
-Q: Why we cannot suspend to a swap file?
+Q: Why can't we suspend to a swap file?
 
 A: Because accessing swap file needs the filesystem mounted, and
 filesystem might do something wrong (like replaying the journal)
-during mount. [Probably could be solved by modifying every filesystem
-to support some kind of "really read-only!" option. Patches welcome.]
+during mount.
+
+There are few ways to get that fixed:
+
+1) Probably could be solved by modifying every filesystem to support
+some kind of "really read-only!" option. Patches welcome.
+
+2) suspend2 gets around that by storing absolute positions in on-disk
+image (and blocksize), with resume parameter pointing directly to
+suspend header.
+
+Q: Is there a maximum system RAM size that is supported by swsusp?
+
+A: It should work okay with highmem.
+
+Q: Does swsusp (to disk) use only one swap partition or can it use
+multiple swap partitions (aggregate them into one logical space)?
+
+A: Only one swap partition, sorry.
+
+Q: If my application(s) causes lots of memory & swap space to be used
+(over half of the total system RAM), is it correct that it is likely
+to be useless to try to suspend to disk while that app is running?
+
+A: No, it should work okay, as long as your app does not mlock()
+it. Just prepare big enough swap partition.
+
+Q: What information is usefull for debugging suspend-to-disk problems?
+
+A: Well, last messages on the screen are always useful. If something
+is broken, it is usually some kernel driver, therefore trying with as
+little as possible modules loaded helps a lot. I also prefer people to
+suspend from console, preferably without X running. Booting with
+init=/bin/bash, then swapon and starting suspend sequence manually
+usually does the trick. Then it is good idea to try with latest
+vanilla kernel.
+
+

Documentation/power/video.txt

@@ -120,6 +120,7 @@ IBM ThinkPad T42p (2373-GTG)	s3_bios (2)
 IBM TP X20			??? (*)
 IBM TP X30			s3_bios (2)
 IBM TP X31 / Type 2672-XXH      none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
+IBM TP X32			none (1), but backlight is on and video is trashed after long suspend
 IBM Thinkpad X40 Type 2371-7JG  s3_bios,s3_mode (4)
 Medion MD4220			??? (*)
 Samsung P35			vbetool needed (6)

Documentation/scsi/aic7xxx.txt

@@ -1,5 +1,5 @@
 ====================================================================
-=    Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v6.2.28   =
+=    Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0      =
 =                            README for                            =
 =                     The Linux Operating System                   =
 ====================================================================
@@ -131,6 +131,10 @@ The following information is available in this file:
       SCSI "stub" effects.
 
 2. Version History
+   7.0	  (4th August, 2005)
+	- Updated driver to use SCSI transport class infrastructure
+	- Upported sequencer and core fixes from last adaptec released
+	  version of the driver.
    6.2.36 (June 3rd, 2003)
         - Correct code that disables PCI parity error checking.
         - Correct and simplify handling of the ignore wide residue

Documentation/scsi/scsi_mid_low_api.txt

@@ -373,13 +373,11 @@ Summary:
    scsi_activate_tcq - turn on tag command queueing
    scsi_add_device - creates new scsi device (lu) instance
    scsi_add_host - perform sysfs registration and SCSI bus scan.
-   scsi_add_timer - (re-)start timer on a SCSI command.
    scsi_adjust_queue_depth - change the queue depth on a SCSI device
    scsi_assign_lock - replace default host_lock with given lock
    scsi_bios_ptable - return copy of block device's partition table
    scsi_block_requests - prevent further commands being queued to given host
    scsi_deactivate_tcq - turn off tag command queueing
-   scsi_delete_timer - cancel timer on a SCSI command.
    scsi_host_alloc - return a new scsi_host instance whose refcount==1
    scsi_host_get - increments Scsi_Host instance's refcount
    scsi_host_put - decrements Scsi_Host instance's refcount (free if 0)
@@ -457,27 +455,6 @@ struct scsi_device * scsi_add_device(struct Scsi_Host *shost,
 int scsi_add_host(struct Scsi_Host *shost, struct device * dev)
 
 
-/**
- * scsi_add_timer - (re-)start timer on a SCSI command.
- * @scmd:    pointer to scsi command instance
- * @timeout: duration of timeout in "jiffies"
- * @complete: pointer to function to call if timeout expires
- *
- *      Returns nothing
- *
- *      Might block: no
- *
- *      Notes: Each scsi command has its own timer, and as it is added
- *      to the queue, we set up the timer. When the command completes, 
- *      we cancel the timer. An LLD can use this function to change
- *      the existing timeout value.
- *
- *      Defined in: drivers/scsi/scsi_error.c
- **/
-void scsi_add_timer(struct scsi_cmnd *scmd, int timeout, 
-                    void (*complete)(struct scsi_cmnd *))
-
-
 /**
  * scsi_adjust_queue_depth - allow LLD to change queue depth on a SCSI device
  * @sdev:       pointer to SCSI device to change queue depth on
@@ -565,24 +542,6 @@ void scsi_block_requests(struct Scsi_Host * shost)
 void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
 
 
-/**
- * scsi_delete_timer - cancel timer on a SCSI command.
- * @scmd:    pointer to scsi command instance
- *
- *      Returns 1 if able to cancel timer else 0 (i.e. too late or already
- *      cancelled).
- *
- *      Might block: no [may in the future if it invokes del_timer_sync()]
- *
- *      Notes: All commands issued by upper levels already have a timeout
- *      associated with them. An LLD can use this function to cancel the
- *      timer.
- *
- *      Defined in: drivers/scsi/scsi_error.c
- **/
-int scsi_delete_timer(struct scsi_cmnd *scmd)
-
-
 /**
  * scsi_host_alloc - create a scsi host adapter instance and perform basic
  *                   initialization.

Documentation/sonypi.txt

@@ -99,6 +99,7 @@ statically linked into the kernel). Those options are:
 				SONYPI_MEYE_MASK		0x0400
 				SONYPI_MEMORYSTICK_MASK		0x0800
 				SONYPI_BATTERY_MASK		0x1000
+				SONYPI_WIRELESS_MASK		0x2000
 
 	useinput:	if set (which is the default) two input devices are
 			created, one which interprets the jogdial events as
@@ -137,6 +138,15 @@ Bugs:
 	  speed handling etc). Use ACPI instead of APM if it works on your
 	  laptop.
 
+	- sonypi lacks the ability to distinguish between certain key
+	  events on some models.
+
+	- some models with the nvidia card (geforce go 6200 tc) uses a
+	  different way to adjust the backlighting of the screen. There
+	  is a userspace utility to adjust the brightness on those models,
+	  which can be downloaded from
+	  http://www.acc.umu.se/~erikw/program/smartdimmer-0.1.tar.bz2
+
 	- since all development was done by reverse engineering, there is
 	  _absolutely no guarantee_ that this driver will not crash your
 	  laptop. Permanently.

MAINTAINERS

@@ -202,13 +202,6 @@ P:	Colin Leroy
 M:	colin@colino.net
 S:	Maintained
 
-ADVANSYS SCSI DRIVER
-P:	Bob Frey
-M:	linux@advansys.com
-W:	http://www.advansys.com/linux.html
-L:	linux-scsi@vger.kernel.org
-S:	Maintained
-
 AEDSP16 DRIVER
 P:	Riccardo Facchetti
 M:	fizban@tin.it
@@ -696,6 +689,11 @@ M:	dz@debian.org
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 
+DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
+P:	Doug Warzecha
+M:	Douglas_Warzecha@dell.com
+S:	Maintained
+
 DEVICE-MAPPER
 P:	Alasdair Kergon
 L:	dm-devel@redhat.com
@@ -824,6 +822,13 @@ L:	emu10k1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/emu10k1/
 S:	Maintained
 
+EMULEX LPFC FC SCSI DRIVER
+P:      James Smart
+M:      james.smart@emulex.com
+L:      linux-scsi@vger.kernel.org
+W:      http://sourceforge.net/projects/lpfcxxxx
+S:      Supported
+
 EPSON 1355 FRAMEBUFFER DRIVER
 P:	Christopher Hoover
 M:	ch@murgatroid.com, ch@hpl.hp.com
@@ -879,7 +884,7 @@ S:	Maintained
 
 FILESYSTEMS (VFS and infrastructure)
 P:	Alexander Viro
-M:	viro@parcelfarce.linux.theplanet.co.uk
+M:	viro@zeniv.linux.org.uk
 S:	Maintained
 
 FIRMWARE LOADER (request_firmware)
@@ -1967,7 +1972,6 @@ S:	Supported
 
 ROCKETPORT DRIVER
 P:	Comtrol Corp.
-M:	support@comtrol.com
 W:	http://www.comtrol.com
 S:	Maintained
 

arch/alpha/Kconfig

@@ -479,6 +479,9 @@ config EISA
 	depends on ALPHA_GENERIC || ALPHA_JENSEN || ALPHA_ALCOR || ALPHA_MIKASA || ALPHA_SABLE || ALPHA_LYNX || ALPHA_NORITAKE || ALPHA_RAWHIDE
 	default y
 
+config ARCH_MAY_HAVE_PC_FDC
+	def_bool y
+
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL

arch/alpha/kernel/time.c

@@ -149,7 +149,7 @@ irqreturn_t timer_interrupt(int irq, void *dev, struct pt_regs * regs)
 	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	if ((time_status & STA_UNSYNC) == 0
+	if (ntp_synced()
 	    && xtime.tv_sec > state.last_rtc_update + 660
 	    && xtime.tv_nsec >= 500000 - ((unsigned) TICK_SIZE) / 2
 	    && xtime.tv_nsec <= 500000 + ((unsigned) TICK_SIZE) / 2) {
@@ -502,10 +502,7 @@ do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();

arch/arm/Kconfig

@@ -64,6 +64,9 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_BUST_SPINLOCK
 	bool
 
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+
 config GENERIC_ISA_DMA
 	bool
 
@@ -150,6 +153,7 @@ config ARCH_RPC
 	select ARCH_ACORN
 	select FIQ
 	select TIMER_ACORN
+	select ARCH_MAY_HAVE_PC_FDC
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.

arch/arm/boot/compressed/head-sharpsl.S

@@ -7,7 +7,8 @@
  * so we have to figure out the machine for ourselves...
  *
  * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
- * and Husky (SL-C760).
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
  *
  */
 
@@ -23,6 +24,22 @@
 
 __SharpSL_start:
 
+/* Check for TC6393 - if found we have a Tosa */
+	ldr	r7, .TOSAID
+	mov	r1, #0x10000000		@ Base address of TC6393 chip
+	mov 	r6, #0x03
+	ldrh	r3, [r1, #8]		@ Load TC6393XB Revison: This is 0x0003
+	cmp	r6, r3
+	beq	.SHARPEND		@ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+	mrc p15, 0, r4, c0, c0		@ Get Processor ID
+	and	r4, r4, #0xffffff00
+	ldr	r3, .PXA270ID
+	cmp	r4, r3
+	beq	.PXA270
+
+/* Check for w100 - if not found we have a Poodle */
 	ldr	r1, .W100ADDR		@ Base address of w100 chip + regs offset
 
 	mov r6, #0x31			@ Load Magic Init value
@@ -30,7 +47,7 @@ __SharpSL_start:
 	mov r5, #0x3000
 .W100LOOP:
 	subs r5, r5, #1
-    bne .W100LOOP
+	bne .W100LOOP
 	mov r6, #0x30			@ Load 2nd Magic Init value
 	str	r6, [r1, #0x280]	@ to SCRATCH_UMSK
 
@@ -40,45 +57,52 @@ __SharpSL_start:
 	cmp	r6, r3
 	bne	.SHARPEND			@ We have no w100 - Poodle
 
-	mrc p15, 0, r6, c0, c0	@ Get Processor ID
-	and	r6, r6, #0xffffff00
+/* Check for pxa250 - if found we have a Corgi */
 	ldr	r7, .CORGIID
 	ldr	r3, .PXA255ID
-	cmp	r6, r3
+	cmp	r4, r3
 	blo	.SHARPEND			@ We have a PXA250 - Corgi
 
-	mov	r1, #0x0c000000		@ Base address of NAND chip
-	ldrb	r3, [r1, #24]	@ Load FLASHCTL
-	bic	r3, r3, #0x11		@ SET NCE
-	orr	r3, r3, #0x0a		@ SET CLR + FLWP
-	strb	r3, [r1, #24]	@ Save to FLASHCTL
-	mov 	r2, #0x90		@ Command "readid"
-	strb	r2, [r1, #20]	@ Save to FLASHIO
-	bic	r3, r3, #2			@ CLR CLE
-	orr	r3, r3, #4			@ SET ALE
-	strb	r3, [r1, #24]	@ Save to FLASHCTL
-	mov		r2, #0			@ Address 0x00
-	strb	r2, [r1, #20]	@ Save to FLASHIO
-	bic	r3, r3, #4			@ CLR ALE
-	strb	r3, [r1, #24]	@ Save to FLASHCTL
-.SHARP1:
-	ldrb	r3, [r1, #24]	@ Load FLASHCTL
-	tst	r3, #32				@ Is chip ready?
-	beq	.SHARP1
-	ldrb	r2, [r1, #20]	@ NAND Manufacturer ID
-	ldrb	r3, [r1, #20]	@ NAND Chip ID
+/* Check for 64MiB flash - if found we have a Shepherd */
+	bl	get_flash_ids
 	ldr	r7, .SHEPHERDID
 	cmp	r3, #0x76			@ 64MiB flash
 	beq	.SHARPEND			@ We have Shepherd
+
+/* Must be a Husky */
 	ldr	r7, .HUSKYID		@ Must be Husky
 	b .SHARPEND
 
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+	bl	get_flash_ids
+	ldr	r7, .SPITZID
+	cmp	r3, #0x73			@ 16MiB flash
+	beq	.SHARPEND			@ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+	ldr	r1, .SCOOP2ADDR
+	ldr	r7, .BORZOIID
+	mov 	r6, #0x0140
+	strh	r6, [r1]
+	ldrh	r6, [r1]
+	cmp	r6, #0x0140
+	beq	.SHARPEND			@ We have Borzoi
+
+/* Must be Akita */
+	ldr	r7, .AKITAID
+	b	.SHARPEND			@ We have Borzoi
+
 .PXA255ID:
 	.word	0x69052d00		@ PXA255 Processor ID
+.PXA270ID:
+	.word	0x69054100		@ PXA270 Processor ID
 .W100ID:
 	.word	0x57411002		@ w100 Chip ID
 .W100ADDR:
 	.word 	0x08010000		@ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+	.word	0x08800040
 .POODLEID:
 	.word	MACH_TYPE_POODLE
 .CORGIID:
@@ -87,6 +111,41 @@ __SharpSL_start:
 	.word	MACH_TYPE_SHEPHERD
 .HUSKYID:
 	.word	MACH_TYPE_HUSKY
-.SHARPEND:
+.TOSAID:
+	.word	MACH_TYPE_TOSA
+.SPITZID:
+	.word	MACH_TYPE_SPITZ
+.AKITAID:
+	.word	MACH_TYPE_AKITA
+.BORZOIID:
+	.word	MACH_TYPE_BORZOI
 
+/*
+ * Return: r2 - NAND Manufacturer ID
+ *         r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+	mov	r1, #0x0c000000		@ Base address of NAND chip
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	bic	r3, r3, #0x11		@ SET NCE
+	orr	r3, r3, #0x0a		@ SET CLR + FLWP
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov 	r2, #0x90		@ Command "readid"
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #2		@ CLR CLE
+	orr	r3, r3, #4		@ SET ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+	mov	r2, #0			@ Address 0x00
+	strb	r2, [r1, #20]		@ Save to FLASHIO
+	bic	r3, r3, #4		@ CLR ALE
+	strb	r3, [r1, #24]		@ Save to FLASHCTL
+.fids1:
+	ldrb	r3, [r1, #24]		@ Load FLASHCTL
+	tst	r3, #32			@ Is chip ready?
+	beq	.fids1
+	ldrb	r2, [r1, #20]		@ NAND Manufacturer ID
+	ldrb	r3, [r1, #20]		@ NAND Chip ID
+	mov	pc, lr
 
+.SHARPEND:

arch/arm/configs/omap_h2_1610_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc2
-# Fri Jul  8 04:49:34 2005
+# Linux kernel version: 2.6.13
+# Mon Sep  5 18:07:12 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
@@ -102,9 +102,11 @@ CONFIG_OMAP_MUX_WARNINGS=y
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
+# CONFIG_OMAP_DM_TIMER is not set
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
 
 #
 # OMAP Core Type
@@ -166,7 +168,6 @@ CONFIG_ISA_DMA_API=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
 CONFIG_PREEMPT=y
 CONFIG_NO_IDLE_HZ=y
 # CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
@@ -230,91 +231,82 @@ CONFIG_PM=y
 # CONFIG_APM is not set
 
 #
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
+# Networking
 #
-CONFIG_MTD=y
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=3
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
+CONFIG_NET=y
 
 #
-# User Modules And Translation Layers
+# Networking options
 #
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_IP_TCPDIAG=y
+# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
 
 #
-# RAM/ROM/Flash chip drivers
+# SCTP Configuration (EXPERIMENTAL)
 #
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
-# Mapping drivers for chip access
+# Network testing
 #
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 
 #
-# Self-contained MTD device drivers
+# Device Drivers
 #
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
 
 #
-# Disk-On-Chip Device Drivers
+# Generic Driver Options
 #
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 
 #
-# NAND Flash Device Drivers
+# Memory Technology Devices (MTD)
 #
-# CONFIG_MTD_NAND is not set
+# CONFIG_MTD is not set
 
 #
 # Parallel port support
@@ -403,72 +395,8 @@ CONFIG_SCSI_PROC_FS=y
 #
 
 #
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
+# Network device support
 #
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -518,6 +446,8 @@ CONFIG_SLIP_COMPRESSED=y
 # CONFIG_SLIP_MODE_SLIP6 is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 
 #
 # ISDN subsystem
@@ -615,77 +545,15 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 #
 # I2C support
 #
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C is not set
+# CONFIG_I2C_SENSOR is not set
+CONFIG_ISP1301_OMAP=y
 
 #
-# Hardware Sensors Chip support
+# Hardware Monitoring support
 #
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_ISP1301_OMAP=y
-CONFIG_TPS65010=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
@@ -756,15 +624,9 @@ CONFIG_SOUND=y
 # Open Sound System
 #
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_FUSION is not set
-# CONFIG_SOUND_CS4281 is not set
-# CONFIG_SOUND_SONICVIBES is not set
-# CONFIG_SOUND_TRIDENT is not set
 # CONFIG_SOUND_MSNDCLAS is not set
 # CONFIG_SOUND_MSNDPIN is not set
 # CONFIG_SOUND_OSS is not set
-# CONFIG_SOUND_TVMIXER is not set
 # CONFIG_SOUND_AD1980 is not set
 
 #
@@ -810,6 +672,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_JBD is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
 
 #
 # XFS support
@@ -817,6 +680,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_XFS_FS is not set
 # CONFIG_MINIX_FS is not set
 CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -857,15 +721,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=2
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -1007,4 +862,3 @@ CONFIG_CRYPTO_DES=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/time.c

@@ -102,7 +102,7 @@ static unsigned long next_rtc_update;
  */
 static inline void do_set_rtc(void)
 {
-	if (time_status & STA_UNSYNC || set_rtc == NULL)
+	if (!ntp_synced() || set_rtc == NULL)
 		return;
 
 	if (next_rtc_update &&
@@ -292,10 +292,7 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;

arch/arm/mach-footbridge/Kconfig

@@ -87,6 +87,7 @@ config FOOTBRIDGE_ADDIN
 
 # EBSA285 board in either host or addin mode
 config ARCH_EBSA285
+	select ARCH_MAY_HAVE_PC_FDC
 	bool
 
 endif

arch/arm/mach-iop3xx/iop321-time.c

@@ -60,7 +60,7 @@ static unsigned long iop321_gettimeoffset(void)
 	/*
 	 * Now convert them to usec.
 	 */
-	usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
 
 	return usec;
 }

arch/arm/mach-iop3xx/iop331-time.c

@@ -58,7 +58,7 @@ static unsigned long iop331_gettimeoffset(void)
 	/*
 	 * Now convert them to usec.
 	 */
-	usec = (unsigned long)(elapsed * (tick_nsec / 1000)) / LATCH;
+	usec = (unsigned long)(elapsed / (CLOCK_TICK_RATE/1000000));
 
 	return usec;
 }

arch/arm/mach-ixp2000/core.c

@@ -382,7 +382,7 @@ static void ixp2000_GPIO_irq_unmask(unsigned int irq)
 static struct irqchip ixp2000_GPIO_irq_chip = {
 	.ack		= ixp2000_GPIO_irq_mask_ack,
 	.mask		= ixp2000_GPIO_irq_mask,
-	.unmask		= ixp2000_GPIO_irq_unmask
+	.unmask		= ixp2000_GPIO_irq_unmask,
 	.set_type	= ixp2000_GPIO_irq_type,
 };
 

arch/arm/mach-ixp4xx/common.c

@@ -179,17 +179,17 @@ static void ixp4xx_irq_level_unmask(unsigned int irq)
 }
 
 static struct irqchip ixp4xx_irq_level_chip = {
-	.ack	= ixp4xx_irq_mask,
-	.mask	= ixp4xx_irq_mask,
-	.unmask	= ixp4xx_irq_level_unmask,
-	.type	= ixp4xx_set_irq_type
+	.ack		= ixp4xx_irq_mask,
+	.mask		= ixp4xx_irq_mask,
+	.unmask		= ixp4xx_irq_level_unmask,
+	.set_type	= ixp4xx_set_irq_type,
 };
 
 static struct irqchip ixp4xx_irq_edge_chip = {
-	.ack	= ixp4xx_irq_ack,
-	.mask	= ixp4xx_irq_mask,
-	.unmask	= ixp4xx_irq_unmask,
-	.type	= ixp4xx_set_irq_type
+	.ack		= ixp4xx_irq_ack,
+	.mask		= ixp4xx_irq_mask,
+	.unmask		= ixp4xx_irq_unmask,
+	.set_type	= ixp4xx_set_irq_type,
 };
 
 static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type)

arch/arm/mach-omap1/irq.c

@@ -165,10 +165,10 @@ static struct omap_irq_bank omap1610_irq_banks[] = {
 #endif
 
 static struct irqchip omap_irq_chip = {
-	.ack    = omap_mask_ack_irq,
-	.mask   = omap_mask_irq,
-	.unmask = omap_unmask_irq,
-	.wake	= omap_wake_irq,
+	.ack		= omap_mask_ack_irq,
+	.mask		= omap_mask_irq,
+	.unmask		= omap_unmask_irq,
+	.set_wake	= omap_wake_irq,
 };
 
 void __init omap_init_irq(void)

arch/arm/mach-pxa/Makefile

@@ -11,7 +11,7 @@ obj-$(CONFIG_PXA27x) += pxa27x.o
 obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
 obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
 obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o ssp.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 
 # Support for blinky lights

arch/arm/mach-pxa/corgi.c

@@ -39,7 +39,6 @@
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
-#include <video/w100fb.h>
 
 #include "generic.h"
 
@@ -87,7 +86,7 @@ struct platform_device corgiscoop_device = {
  * also use scoop functions and this makes the power up/down order
  * work correctly.
  */
-static struct platform_device corgissp_device = {
+struct platform_device corgissp_device = {
 	.name		= "corgi-ssp",
 	.dev		= {
  		.parent = &corgiscoop_device.dev,
@@ -97,41 +96,33 @@ static struct platform_device corgissp_device = {
 
 
 /*
- * Corgi w100 Frame Buffer Device
+ * Corgi Backlight Device
  */
-static struct w100fb_mach_info corgi_fb_info = {
-	.w100fb_ssp_send 	= corgi_ssp_lcdtg_send,
-	.comadj 			= -1,
-	.phadadj 			= -1,
-};
-
-static struct resource corgi_fb_resources[] = {
-	[0] = {
-		.start		= 0x08000000,
-		.end		= 0x08ffffff,
-		.flags		= IORESOURCE_MEM,
+static struct platform_device corgibl_device = {
+	.name		= "corgi-bl",
+	.dev		= {
+ 		.parent = &corgifb_device.dev,
 	},
+	.id		= -1,
 };
 
-static struct platform_device corgifb_device = {
-	.name		= "w100fb",
+
+/*
+ * Corgi Keyboard Device
+ */
+static struct platform_device corgikbd_device = {
+	.name		= "corgi-keyboard",
 	.id		= -1,
-	.dev		= {
- 		.platform_data	= &corgi_fb_info,
- 		.parent = &corgissp_device.dev,
-	},
-	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
-	.resource	= corgi_fb_resources,
 };
 
 
 /*
- * Corgi Backlight Device
+ * Corgi Touch Screen Device
  */
-static struct platform_device corgibl_device = {
-	.name		= "corgi-bl",
+static struct platform_device corgits_device = {
+	.name		= "corgi-ts",
 	.dev		= {
- 		.parent = &corgifb_device.dev,
+ 		.parent = &corgissp_device.dev,
 	},
 	.id		= -1,
 };
@@ -199,6 +190,11 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 	}
 }
 
+static int corgi_mci_get_ro(struct device *dev)
+{
+	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+}
+
 static void corgi_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
@@ -208,11 +204,13 @@ static void corgi_mci_exit(struct device *dev, void *data)
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.init 		= corgi_mci_init,
+	.get_ro		= corgi_mci_get_ro,
 	.setpower 	= corgi_mci_setpower,
 	.exit		= corgi_mci_exit,
 };
 
 
+
 /*
  * USB Device Controller
  */
@@ -238,14 +236,13 @@ static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
 	&corgissp_device,
 	&corgifb_device,
+	&corgikbd_device,
 	&corgibl_device,
+	&corgits_device,
 };
 
 static void __init corgi_init(void)
 {
-	corgi_fb_info.comadj=sharpsl_param.comadj;
-	corgi_fb_info.phadadj=sharpsl_param.phadadj;
-
 	pxa_gpio_mode(CORGI_GPIO_USB_PULLUP | GPIO_OUT);
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);

arch/arm/mach-pxa/corgi_lcd.c

@@ -0,0 +1,396 @@
+/*
+ * linux/drivers/video/w100fb.c
+ *
+ * Corgi LCD Specific Code for ATI Imageon w100 (Wallaby)
+ *
+ * Copyright (C) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <asm/arch/corgi.h>
+#include <asm/mach/sharpsl_param.h>
+#include <video/w100fb.h>
+
+/* Register Addresses */
+#define RESCTL_ADRS     0x00
+#define PHACTRL_ADRS    0x01
+#define DUTYCTRL_ADRS   0x02
+#define POWERREG0_ADRS  0x03
+#define POWERREG1_ADRS  0x04
+#define GPOR3_ADRS      0x05
+#define PICTRL_ADRS     0x06
+#define POLCTRL_ADRS    0x07
+
+/* Resgister Bit Definitions */
+#define RESCTL_QVGA     0x01
+#define RESCTL_VGA      0x00
+
+#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
+#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
+#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
+
+#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
+#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
+#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
+
+#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
+#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
+#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
+#define POWER0_COM_ON   0x08  /* COM Powewr Supply ON */
+#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
+
+#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
+#define POWER0_COM_OFF  0x00  /* COM Powewr Supply OFF */
+#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
+
+#define PICTRL_INIT_STATE      0x01
+#define PICTRL_INIOFF          0x02
+#define PICTRL_POWER_DOWN      0x04
+#define PICTRL_COM_SIGNAL_OFF  0x08
+#define PICTRL_DAC_SIGNAL_OFF  0x10
+
+#define POLCTRL_SYNC_POL_FALL  0x01
+#define POLCTRL_EN_POL_FALL    0x02
+#define POLCTRL_DATA_POL_FALL  0x04
+#define POLCTRL_SYNC_ACT_H     0x08
+#define POLCTRL_EN_ACT_L       0x10
+
+#define POLCTRL_SYNC_POL_RISE  0x00
+#define POLCTRL_EN_POL_RISE    0x00
+#define POLCTRL_DATA_POL_RISE  0x00
+#define POLCTRL_SYNC_ACT_L     0x00
+#define POLCTRL_EN_ACT_H       0x00
+
+#define PHACTRL_PHASE_MANUAL   0x01
+#define DEFAULT_PHAD_QVGA     (9)
+#define DEFAULT_COMADJ        (125)
+
+/*
+ * This is only a psuedo I2C interface. We can't use the standard kernel
+ * routines as the interface is write only. We just assume the data is acked...
+ */
+static void lcdtg_ssp_i2c_send(u8 data)
+{
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
+	udelay(10);
+}
+
+static void lcdtg_i2c_send_bit(u8 data)
+{
+	lcdtg_ssp_i2c_send(data);
+	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(data);
+}
+
+static void lcdtg_i2c_send_start(u8 base)
+{
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base);
+}
+
+static void lcdtg_i2c_send_stop(u8 base)
+{
+	lcdtg_ssp_i2c_send(base);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
+	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
+}
+
+static void lcdtg_i2c_send_byte(u8 base, u8 data)
+{
+	int i;
+	for (i = 0; i < 8; i++) {
+		if (data & 0x80)
+			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
+		else
+			lcdtg_i2c_send_bit(base);
+		data <<= 1;
+	}
+}
+
+static void lcdtg_i2c_wait_ack(u8 base)
+{
+	lcdtg_i2c_send_bit(base);
+}
+
+static void lcdtg_set_common_voltage(u8 base_data, u8 data)
+{
+	/* Set Common Voltage to M62332FP via I2C */
+	lcdtg_i2c_send_start(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x9c);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, 0x00);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_byte(base_data, data);
+	lcdtg_i2c_wait_ack(base_data);
+	lcdtg_i2c_send_stop(base_data);
+}
+
+/* Set Phase Adjuct */
+static void lcdtg_set_phadadj(struct w100fb_par *par)
+{
+	int adj;
+	switch(par->xres) {
+		case 480:
+		case 640:
+			/* Setting for VGA */
+			adj = sharpsl_param.phadadj;
+			if (adj < 0) {
+				adj = PHACTRL_PHASE_MANUAL;
+			} else {
+				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
+			}
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Setting for QVGA */
+			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
+			break;
+	}
+
+	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
+}
+
+static int lcd_inited;
+
+static void lcdtg_hw_init(struct w100fb_par *par)
+{
+	if (!lcd_inited) {
+		int comadj;
+
+		/* Initialize Internal Logic & Port */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
+	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+		/* VDD(+8V), SVSS(-4V) ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+		mdelay(3);
+
+		/* DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+		/* INIB = H, INI = L  */
+		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
+
+		/* Set Common Voltage */
+		comadj = sharpsl_param.comadj;
+		if (comadj < 0)
+			comadj = DEFAULT_COMADJ;
+		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
+
+		/* VCC5 ON, DAC ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
+				POWER0_COM_OFF | POWER0_VCC5_ON);
+
+		/* GVSS(-8V) ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+		mdelay(2);
+
+		/* COM SIGNAL ON (PICTL[3] = L) */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
+
+		/* COM ON, DAC ON, VCC5_ON */
+		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
+				| POWER0_COM_ON | POWER0_VCC5_ON);
+
+		/* VW ON, GVSS ON, VDD ON */
+		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+		/* Signals output enable */
+		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
+
+		/* Set Phase Adjuct */
+		lcdtg_set_phadadj(par);
+
+		/* Initialize for Input Signals from ATI */
+		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
+				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
+		udelay(1000);
+
+		lcd_inited=1;
+	} else {
+		lcdtg_set_phadadj(par);
+	}
+
+	switch(par->xres) {
+		case 480:
+		case 640:
+			/* Set Lcd Resolution (VGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
+			break;
+		case 240:
+		case 320:
+		default:
+			/* Set Lcd Resolution (QVGA) */
+			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
+			break;
+	}
+}
+
+static void lcdtg_suspend(struct w100fb_par *par)
+{
+	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
+	mdelay(34);
+
+	/* (1)VW OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
+
+	/* (2)COM OFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
+
+	/* (3)Set Common Voltage Bias 0V */
+	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
+
+	/* (4)GVSS OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
+
+	/* (5)VCC5 OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (6)Set PDWN, INIOFF, DACOFF */
+	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
+			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
+
+	/* (7)DAC OFF */
+	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
+
+	/* (8)VDD OFF */
+	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
+
+	lcd_inited = 0;
+}
+
+static struct w100_tg_info corgi_lcdtg_info = {
+	.change=lcdtg_hw_init,
+	.suspend=lcdtg_suspend,
+	.resume=lcdtg_hw_init,
+};
+
+/*
+ * Corgi w100 Frame Buffer Device
+ */
+
+static struct w100_mem_info corgi_fb_mem = {
+	.ext_cntl          = 0x00040003,
+	.sdram_mode_reg    = 0x00650021,
+	.ext_timing_cntl   = 0x10002a4a,
+	.io_cntl           = 0x7ff87012,
+	.size              = 0x1fffff,
+};
+
+static struct w100_gen_regs corgi_fb_regs = {
+	.lcd_format    = 0x00000003,
+	.lcdd_cntl1    = 0x01CC0000,
+	.lcdd_cntl2    = 0x0003FFFF,
+	.genlcd_cntl1  = 0x00FFFF0D,
+	.genlcd_cntl2  = 0x003F3003,
+	.genlcd_cntl3  = 0x000102aa,
+};
+
+static struct w100_gpio_regs corgi_fb_gpio = {
+	.init_data1   = 0x000000bf,
+	.init_data2   = 0x00000000,
+	.gpio_dir1    = 0x00000000,
+	.gpio_oe1     = 0x03c0feff,
+	.gpio_dir2    = 0x00000000,
+	.gpio_oe2     = 0x00000000,
+};
+
+static struct w100_mode corgi_fb_modes[] = {
+{
+	.xres            = 480,
+	.yres            = 640,
+	.left_margin     = 0x56,
+	.right_margin    = 0x55,
+	.upper_margin    = 0x03,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x82360056,
+	.crtc_ls         = 0xA0280000,
+	.crtc_gs         = 0x80280028,
+	.crtc_vpos_gs    = 0x02830002,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 75,
+	.fast_pll_freq   = 100,
+	.sysclk_src      = CLK_SRC_PLL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_PLL,
+	.pixclk_divider  = 2,
+	.pixclk_divider_rotated = 6,
+},{
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 0x27,
+	.right_margin    = 0x2e,
+	.upper_margin    = 0x01,
+	.lower_margin    = 0x00,
+	.crtc_ss         = 0x81170027,
+	.crtc_ls         = 0xA0140000,
+	.crtc_gs         = 0xC0140014,
+	.crtc_vpos_gs    = 0x00010141,
+	.crtc_rev        = 0x00400008,
+	.crtc_dclk       = 0xA0000000,
+	.crtc_gclk       = 0x8015010F,
+	.crtc_goe        = 0x80100110,
+	.crtc_ps1_active = 0x41060010,
+	.pll_freq        = 0,
+	.fast_pll_freq   = 0,
+	.sysclk_src      = CLK_SRC_XTAL,
+	.sysclk_divider  = 0,
+	.pixclk_src      = CLK_SRC_XTAL,
+	.pixclk_divider  = 1,
+	.pixclk_divider_rotated = 1,
+},
+
+};
+
+static struct w100fb_mach_info corgi_fb_info = {
+	.tg         = &corgi_lcdtg_info,
+	.init_mode  = INIT_MODE_ROTATED,
+	.mem        = &corgi_fb_mem,
+	.regs       = &corgi_fb_regs,
+	.modelist   = &corgi_fb_modes[0],
+	.num_modes  = 2,
+	.gpio       = &corgi_fb_gpio,
+	.xtal_freq  = 12500000,
+	.xtal_dbl   = 0,
+};
+
+static struct resource corgi_fb_resources[] = {
+	[0] = {
+		.start   = 0x08000000,
+		.end     = 0x08ffffff,
+		.flags   = IORESOURCE_MEM,
+	},
+};
+
+struct platform_device corgifb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(corgi_fb_resources),
+	.resource	= corgi_fb_resources,
+	.dev            = {
+ 		.platform_data = &corgi_fb_info,
+ 		.parent = &corgissp_device.dev,
+	},
+
+};

arch/arm/mach-s3c2410/Kconfig

@@ -2,6 +2,13 @@ if ARCH_S3C2410
 
 menu "S3C24XX Implementations"
 
+config MACH_ANUBIS
+	bool "Simtec Electronics ANUBIS"
+	select CPU_S3C2440
+	help
+	  Say Y gere if you are using the Simtec Electronics ANUBIS
+	  development system
+
 config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select CPU_S3C2410
@@ -11,6 +18,14 @@ config ARCH_BAST
 
 	  Product page: <http://www.simtec.co.uk/products/EB2410ITX/>.
 
+config BAST_PC104_IRQ
+	bool "BAST PC104 IRQ support"
+	depends on ARCH_BAST
+	default y
+	help
+	  Say Y	here to enable the PC104 IRQ routing on the
+	  Simtec BAST (EB2410ITX)
+
 config ARCH_H1940
 	bool "IPAQ H1940"
 	select CPU_S3C2410

arch/arm/mach-s3c2410/Makefile

@@ -26,8 +26,13 @@ obj-$(CONFIG_CPU_S3C2440)  += s3c2440.o s3c2440-dsc.o
 obj-$(CONFIG_CPU_S3C2440)  += s3c2440-irq.o
 obj-$(CONFIG_CPU_S3C2440)  += s3c2440-clock.o
 
+# bast extras
+
+obj-$(CONFIG_BAST_PC104_IRQ)	+= bast-irq.o
+
 # machine specific support
 
+obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
 obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o

arch/arm/mach-s3c2410/bast-irq.c

@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright (c) 2003,2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -21,7 +21,8 @@
  *
  * Modifications:
  *     08-Jan-2003 BJD  Moved from central IRQ code
- */
+ *     21-Aug-2005 BJD  Fixed missing code and compile errors
+*/
 
 
 #include <linux/init.h>
@@ -30,12 +31,19 @@
 #include <linux/ptrace.h>
 #include <linux/sysdev.h>
 
+#include <asm/mach-types.h>
+
 #include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
-#include <asm/hardware/s3c2410/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/bast-map.h>
+#include <asm/arch/bast-irq.h>
+
+#include "irq.h"
 
 #if 0
 #include <asm/debug-ll.h>
@@ -79,15 +87,15 @@ bast_pc104_mask(unsigned int irqno)
 	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
 	temp &= ~bast_pc104_irqmasks[irqno];
 	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-
-	if (temp == 0)
-		bast_extint_mask(IRQ_ISA);
 }
 
 static void
-bast_pc104_ack(unsigned int irqno)
+bast_pc104_maskack(unsigned int irqno)
 {
-	bast_extint_ack(IRQ_ISA);
+	struct irqdesc *desc = irq_desc + IRQ_ISA;
+
+	bast_pc104_mask(irqno);
+	desc->chip->ack(IRQ_ISA);
 }
 
 static void
@@ -98,14 +106,12 @@ bast_pc104_unmask(unsigned int irqno)
 	temp = __raw_readb(BAST_VA_PC104_IRQMASK);
 	temp |= bast_pc104_irqmasks[irqno];
 	__raw_writeb(temp, BAST_VA_PC104_IRQMASK);
-
-	bast_extint_unmask(IRQ_ISA);
 }
 
-static struct bast_pc104_chip = {
+static struct irqchip  bast_pc104_chip = {
 	.mask	     = bast_pc104_mask,
 	.unmask	     = bast_pc104_unmask,
-	.ack	     = bast_pc104_ack
+	.ack	     = bast_pc104_maskack
 };
 
 static void
@@ -119,14 +125,49 @@ bast_irq_pc104_demux(unsigned int irq,
 
 	stat = __raw_readb(BAST_VA_PC104_IRQREQ) & 0xf;
 
-	for (i = 0; i < 4 && stat != 0; i++) {
-		if (stat & 1) {
-			irqno = bast_pc104_irqs[i];
-			desc = irq_desc + irqno;
+	if (unlikely(stat == 0)) {
+		/* ack if we get an irq with nothing (ie, startup) */
+
+		desc = irq_desc + IRQ_ISA;
+		desc->chip->ack(IRQ_ISA);
+	} else {
+		/* handle the IRQ */
+
+		for (i = 0; stat != 0; i++, stat >>= 1) {
+			if (stat & 1) {
+				irqno = bast_pc104_irqs[i];
 
-			desc_handle_irq(irqno, desc, regs);
+				desc_handle_irq(irqno, irq_desc + irqno, regs);
+			}
 		}
+	}
+}
 
-		stat >>= 1;
+static __init int bast_irq_init(void)
+{
+	unsigned int i;
+
+	if (machine_is_bast()) {
+		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+
+		/* zap all the IRQs */
+
+		__raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
+
+		set_irq_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+
+		/* reigster our IRQs */
+
+		for (i = 0; i < 4; i++) {
+			unsigned int irqno = bast_pc104_irqs[i];
+
+			set_irq_chip(irqno, &bast_pc104_chip);
+			set_irq_handler(irqno, do_level_IRQ);
+			set_irq_flags(irqno, IRQF_VALID);
+		}
 	}
+
+	return 0;
 }
+
+arch_initcall(bast_irq_init);

arch/arm/mach-s3c2410/mach-anubis.c

@@ -0,0 +1,270 @@
+/* linux/arch/arm/mach-s3c2410/mach-anubis.c
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *	02-May-2005 BJD  Copied from mach-bast.c
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/arch/anubis-map.h>
+#include <asm/arch/anubis-irq.h>
+#include <asm/arch/anubis-cpld.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-gpio.h>
+#include <asm/arch/regs-mem.h>
+#include <asm/arch/regs-lcd.h>
+#include <asm/arch/nand.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include "clock.h"
+#include "devs.h"
+#include "cpu.h"
+
+#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+
+static struct map_desc anubis_iodesc[] __initdata = {
+  /* ISA IO areas */
+
+  { (u32)S3C24XX_VA_ISA_BYTE, 0x0,	   SZ_16M, MT_DEVICE },
+  { (u32)S3C24XX_VA_ISA_WORD, 0x0,	   SZ_16M, MT_DEVICE },
+
+  /* we could possibly compress the next set down into a set of smaller tables
+   * pagetables, but that would mean using an L2 section, and it still means
+   * we cannot actually feed the same register to an LDR due to 16K spacing
+   */
+
+  /* CPLD control registers */
+
+  { (u32)ANUBIS_VA_CTRL1,	ANUBIS_PA_CTRL1,	SZ_4K, MT_DEVICE },
+  { (u32)ANUBIS_VA_CTRL2,	ANUBIS_PA_CTRL2,	SZ_4K, MT_DEVICE },
+
+  /* IDE drives */
+
+  { (u32)ANUBIS_IDEPRI,		S3C2410_CS3,		SZ_1M, MT_DEVICE },
+  { (u32)ANUBIS_IDEPRIAUX,	S3C2410_CS3+(1<<26),	SZ_1M, MT_DEVICE },
+
+  { (u32)ANUBIS_IDESEC,		S3C2410_CS4,		SZ_1M, MT_DEVICE },
+  { (u32)ANUBIS_IDESECAUX,	S3C2410_CS4+(1<<26),	SZ_1M, MT_DEVICE },
+};
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+	[1] = {
+		.name		= "pclk",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0.
+	}
+};
+
+
+static struct s3c2410_uartcfg anubis_uartcfgs[] = {
+	[0] = {
+		.hwport	     = 0,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = anubis_serial_clocks,
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+	},
+	[1] = {
+		.hwport	     = 2,
+		.flags	     = 0,
+		.ucon	     = UCON,
+		.ulcon	     = ULCON,
+		.ufcon	     = UFCON,
+		.clocks	     = anubis_serial_clocks,
+		.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
+	},
+};
+
+/* NAND Flash on Anubis board */
+
+static int external_map[]   = { 2 };
+static int chip0_map[]      = { 0 };
+static int chip1_map[]      = { 1 };
+
+struct mtd_partition anubis_default_nand_part[] = {
+	[0] = {
+		.name	= "Boot Agent",
+		.size	= SZ_16K,
+		.offset	= 0
+	},
+	[1] = {
+		.name	= "/boot",
+		.size	= SZ_4M - SZ_16K,
+		.offset	= SZ_16K,
+	},
+	[2] = {
+		.name	= "user1",
+		.offset	= SZ_4M,
+		.size	= SZ_32M - SZ_4M,
+	},
+	[3] = {
+		.name	= "user2",
+		.offset	= SZ_32M,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+/* the Anubis has 3 selectable slots for nand-flash, the two
+ * on-board chip areas, as well as the external slot.
+ *
+ * Note, there is no current hot-plug support for the External
+ * socket.
+*/
+
+static struct s3c2410_nand_set anubis_nand_sets[] = {
+	[1] = {
+		.name		= "External",
+		.nr_chips	= 1,
+		.nr_map		= external_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part
+	},
+	[0] = {
+		.name		= "chip0",
+		.nr_chips	= 1,
+		.nr_map		= chip0_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part
+	},
+	[2] = {
+		.name		= "chip1",
+		.nr_chips	= 1,
+		.nr_map		= chip1_map,
+		.nr_partitions	= ARRAY_SIZE(anubis_default_nand_part),
+		.partitions	= anubis_default_nand_part
+	},
+};
+
+static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
+{
+	unsigned int tmp;
+
+	slot = set->nr_map[slot] & 3;
+
+	pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
+		 slot, set, set->nr_map);
+
+	tmp = __raw_readb(ANUBIS_VA_CTRL1);
+	tmp &= ~ANUBIS_CTRL1_NANDSEL;
+	tmp |= slot;
+
+	pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
+
+	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
+}
+
+static struct s3c2410_platform_nand anubis_nand_info = {
+	.tacls		= 25,
+	.twrph0		= 80,
+	.twrph1		= 80,
+	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
+	.sets		= anubis_nand_sets,
+	.select_chip	= anubis_nand_select,
+};
+
+
+/* Standard Anubis devices */
+
+static struct platform_device *anubis_devices[] __initdata = {
+	&s3c_device_usb,
+	&s3c_device_wdt,
+	&s3c_device_adc,
+	&s3c_device_i2c,
+ 	&s3c_device_rtc,
+	&s3c_device_nand,
+};
+
+static struct clk *anubis_clocks[] = {
+	&s3c24xx_dclk0,
+	&s3c24xx_dclk1,
+	&s3c24xx_clkout0,
+	&s3c24xx_clkout1,
+	&s3c24xx_uclk,
+};
+
+static struct s3c24xx_board anubis_board __initdata = {
+	.devices       = anubis_devices,
+	.devices_count = ARRAY_SIZE(anubis_devices),
+	.clocks	       = anubis_clocks,
+	.clocks_count  = ARRAY_SIZE(anubis_clocks)
+};
+
+void __init anubis_map_io(void)
+{
+	/* initialise the clocks */
+
+	s3c24xx_dclk0.parent = NULL;
+	s3c24xx_dclk0.rate   = 12*1000*1000;
+
+	s3c24xx_dclk1.parent = NULL;
+	s3c24xx_dclk1.rate   = 24*1000*1000;
+
+	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
+	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
+
+	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
+
+	s3c_device_nand.dev.platform_data = &anubis_nand_info;
+
+	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
+	s3c24xx_init_clocks(0);
+	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
+	s3c24xx_set_board(&anubis_board);
+
+	/* ensure that the GPIO is setup */
+	s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+}
+
+MACHINE_START(ANUBIS, "Simtec-Anubis")
+	/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
+	.phys_ram	= S3C2410_SDRAM_PA,
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+	.map_io		= anubis_map_io,
+	.init_irq	= s3c24xx_init_irq,
+	.timer		= &s3c24xx_timer,
+MACHINE_END

arch/arm/mach-s3c2410/pm-simtec.c

@@ -48,7 +48,7 @@ static __init int pm_simtec_init(void)
 
 	/* check which machine we are running on */
 
-	if (!machine_is_bast() && !machine_is_vr1000())
+	if (!machine_is_bast() && !machine_is_vr1000() && !machine_is_anubis())
 		return 0;
 
 	printk(KERN_INFO "Simtec Board Power Manangement" COPYRIGHT "\n");

arch/arm/mach-s3c2410/time.c

@@ -164,7 +164,7 @@ static void s3c2410_timer_setup (void)
 
 	/* configure the system for whichever machine is in use */
 
-	if (machine_is_bast() || machine_is_vr1000()) {
+	if (machine_is_bast() || machine_is_vr1000() || machine_is_anubis()) {
 		/* timer is at 12MHz, scaler is 1 */
 		timer_usec_ticks = timer_mask_usec_ticks(1, 12000000);
 		tcnt = 12000000 / HZ;

arch/arm/plat-omap/Kconfig

@@ -91,6 +91,13 @@ config OMAP_32K_TIMER_HZ
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
+config OMAP_DM_TIMER
+	bool "Use dual-mode timer"
+	default n
+	depends on ARCH_OMAP16XX
+	help
+	 Select this option if you want to use OMAP Dual-Mode timers.
+
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
@@ -107,6 +114,15 @@ config OMAP_LL_DEBUG_UART3
 
 endchoice
 
+config OMAP_SERIAL_WAKE
+	bool "Enable wake-up events for serial ports"
+	depends OMAP_MUX
+	default y
+	help
+	  Select this option if you want to have your system wake up
+	  to data on the serial RX line. This allows you to wake the
+	  system from serial console.
+
 endmenu
 
 endif

arch/arm/plat-omap/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := common.o dma.o clock.o mux.o gpio.o mcbsp.o usb.o
+obj-y := common.o sram.o sram-fn.o clock.o dma.o mux.o gpio.o mcbsp.o usb.o
 obj-m :=
 obj-n :=
 obj-  :=
@@ -15,3 +15,5 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
 obj-$(CONFIG_PM) += pm.o sleep.o
 
 obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
+obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
+

arch/arm/plat-omap/clock.c

@@ -21,6 +21,7 @@
 #include <asm/arch/usb.h>
 
 #include "clock.h"
+#include "sram.h"
 
 static LIST_HEAD(clocks);
 static DECLARE_MUTEX(clocks_sem);
@@ -141,7 +142,7 @@ static struct clk arm_ck = {
 static struct clk armper_ck = {
 	.name		= "armper_ck",
 	.parent		= &ck_dpll1,
-	.flags		= CLOCK_IN_OMAP730 | CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX |
 			  RATE_CKCTL,
 	.enable_reg	= ARM_IDLECT2,
 	.enable_bit	= EN_PERCK,
@@ -385,7 +386,8 @@ static struct clk uart2_ck = {
 	.name		= "uart2_ck",
 	/* Direct from ULPD, no parent */
 	.rate		= 12000000,
-	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT,
+	.flags		= CLOCK_IN_OMAP1510 | CLOCK_IN_OMAP16XX | ENABLE_REG_32BIT |
+			  ALWAYS_ENABLED,
 	.enable_reg	= MOD_CONF_CTRL_0,
 	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
 	.set_rate	= &set_uart_rate,
@@ -443,6 +445,15 @@ static struct clk usb_hhc_ck16xx = {
 	.enable_bit	= 8 /* UHOST_EN */,
 };
 
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= CLOCK_IN_OMAP16XX | RATE_FIXED,
+	.enable_reg	= SOFT_REQ_REG,
+	.enable_bit	= 4,
+};
+
 static struct clk mclk_1510 = {
 	.name		= "mclk",
 	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
@@ -552,6 +563,7 @@ static struct clk *  onchip_clks[] = {
 	&uart3_16xx,
 	&usb_clko,
 	&usb_hhc_ck1510, &usb_hhc_ck16xx,
+	&usb_dc_ck,
 	&mclk_1510,  &mclk_16xx,
 	&bclk_1510,  &bclk_16xx,
 	&mmc1_ck,
@@ -946,14 +958,13 @@ static int select_table_rate(struct clk *  clk, unsigned long rate)
 	if (!ptr->rate)
 		return -EINVAL;
 
-	if (!ptr->rate)
-		return -EINVAL;
+	/*
+	 * In most cases we should not need to reprogram DPLL.
+	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
+	 */
+	omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
-	if (unlikely(ck_dpll1.rate == 0)) {
-		omap_writew(ptr->dpllctl_val, DPLL_CTL);
-		ck_dpll1.rate = ptr->pll_rate;
-	}
-	omap_writew(ptr->ckctl_val, ARM_CKCTL);
+	ck_dpll1.rate = ptr->pll_rate;
 	propagate_rate(&ck_dpll1);
 	return 0;
 }
@@ -1224,9 +1235,11 @@ int __init clk_init(void)
 #endif
 	/* Cache rates for clocks connected to ck_ref (not dpll1) */
 	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld/%ld MHz\n",
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
 	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate, arm_ck.rate);
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
 
 #ifdef CONFIG_MACH_OMAP_PERSEUS2
 	/* Select slicer output as OMAP input clock */
@@ -1271,7 +1284,9 @@ static int __init omap_late_clk_reset(void)
 	struct clk *p;
 	__u32 regval32;
 
-	omap_writew(0, SOFT_REQ_REG);
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	regval32 = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(regval32, SOFT_REQ_REG);
 	omap_writew(0, SOFT_REQ_REG2);
 
 	list_for_each_entry(p, &clocks, node) {

arch/arm/plat-omap/common.c

@@ -26,6 +26,7 @@
 #include <asm/hardware/clock.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
+#include <asm/setup.h>
 
 #include <asm/arch/board.h>
 #include <asm/arch/mux.h>
@@ -35,11 +36,11 @@
 
 #define NO_LENGTH_CHECK 0xffffffff
 
-extern int omap_bootloader_tag_len;
-extern u8 omap_bootloader_tag[];
+unsigned char omap_bootloader_tag[512];
+int omap_bootloader_tag_len;
 
 struct omap_board_config_kernel *omap_board_config;
-int omap_board_config_size = 0;
+int omap_board_config_size;
 
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {

arch/arm/plat-omap/dma.c

@@ -425,7 +425,7 @@ static int dma_handle_ch(int ch)
 		dma_chan[ch + 6].saved_csr = csr >> 7;
 		csr &= 0x7f;
 	}
-	if (!csr)
+	if ((csr & 0x3f) == 0)
 		return 0;
 	if (unlikely(dma_chan[ch].dev_id == -1)) {
 		printk(KERN_WARNING "Spurious interrupt from DMA channel %d (CSR %04x)\n",
@@ -890,11 +890,11 @@ void omap_enable_lcd_dma(void)
 	w |= 1 << 8;
 	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
 
+	lcd_dma.active = 1;
+
 	w = omap_readw(OMAP1610_DMA_LCD_CCR);
 	w |= 1 << 7;
 	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	lcd_dma.active = 1;
 }
 
 void omap_setup_lcd_dma(void)
@@ -965,8 +965,8 @@ void omap_clear_dma(int lch)
  */
 dma_addr_t omap_get_dma_src_pos(int lch)
 {
-	return (dma_addr_t) (OMAP_DMA_CSSA_L(lch) |
-			     (OMAP_DMA_CSSA_U(lch) << 16));
+	return (dma_addr_t) (omap_readw(OMAP_DMA_CSSA_L(lch)) |
+	(omap_readw(OMAP_DMA_CSSA_U(lch)) << 16));
 }
 
 /*
@@ -979,8 +979,18 @@ dma_addr_t omap_get_dma_src_pos(int lch)
  */
 dma_addr_t omap_get_dma_dst_pos(int lch)
 {
-	return (dma_addr_t) (OMAP_DMA_CDSA_L(lch) |
-			     (OMAP_DMA_CDSA_U(lch) << 16));
+	return (dma_addr_t) (omap_readw(OMAP_DMA_CDSA_L(lch)) |
+	(omap_readw(OMAP_DMA_CDSA_U(lch)) << 16));
+}
+
+/*
+ * Returns current source transfer counting for the given DMA channel.
+ * Can be used to monitor the progress of a transfer inside a  block.
+ * It must be called with disabled interrupts.
+ */
+int omap_get_dma_src_addr_counter(int lch)
+{
+	return (dma_addr_t) omap_readw(OMAP_DMA_CSAC(lch));
 }
 
 int omap_dma_running(void)
@@ -1076,6 +1086,7 @@ arch_initcall(omap_init_dma);
 
 EXPORT_SYMBOL(omap_get_dma_src_pos);
 EXPORT_SYMBOL(omap_get_dma_dst_pos);
+EXPORT_SYMBOL(omap_get_dma_src_addr_counter);
 EXPORT_SYMBOL(omap_clear_dma);
 EXPORT_SYMBOL(omap_set_dma_priority);
 EXPORT_SYMBOL(omap_request_dma);

arch/arm/plat-omap/dmtimer.c

@@ -0,0 +1,260 @@
+/*
+ * linux/arch/arm/plat-omap/dmtimer.c
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/dmtimer.h>
+#include <asm/io.h>
+#include <asm/arch/irqs.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+#define OMAP_TIMER_COUNT		8
+
+#define OMAP_TIMER_ID_REG		0x00
+#define OMAP_TIMER_OCP_CFG_REG		0x10
+#define OMAP_TIMER_SYS_STAT_REG		0x14
+#define OMAP_TIMER_STAT_REG		0x18
+#define OMAP_TIMER_INT_EN_REG		0x1c
+#define OMAP_TIMER_WAKEUP_EN_REG	0x20
+#define OMAP_TIMER_CTRL_REG		0x24
+#define OMAP_TIMER_COUNTER_REG		0x28
+#define OMAP_TIMER_LOAD_REG		0x2c
+#define OMAP_TIMER_TRIGGER_REG		0x30
+#define OMAP_TIMER_WRITE_PEND_REG 	0x34
+#define OMAP_TIMER_MATCH_REG		0x38
+#define OMAP_TIMER_CAPTURE_REG		0x3c
+#define OMAP_TIMER_IF_CTRL_REG		0x40
+
+
+static struct dmtimer_info_struct {
+	struct list_head	unused_timers;
+	struct list_head	reserved_timers;
+} dm_timer_info;
+
+static struct omap_dm_timer dm_timers[] = {
+	{ .base=0xfffb1400, .irq=INT_1610_GPTIMER1 },
+	{ .base=0xfffb1c00, .irq=INT_1610_GPTIMER2 },
+	{ .base=0xfffb2400, .irq=INT_1610_GPTIMER3 },
+	{ .base=0xfffb2c00, .irq=INT_1610_GPTIMER4 },
+	{ .base=0xfffb3400, .irq=INT_1610_GPTIMER5 },
+	{ .base=0xfffb3c00, .irq=INT_1610_GPTIMER6 },
+	{ .base=0xfffb4400, .irq=INT_1610_GPTIMER7 },
+	{ .base=0xfffb4c00, .irq=INT_1610_GPTIMER8 },
+	{ .base=0x0 },
+};
+
+
+static spinlock_t dm_timer_lock;
+
+
+inline void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value)
+{
+	omap_writel(value, timer->base + reg);
+	while (omap_dm_timer_read_reg(timer, OMAP_TIMER_WRITE_PEND_REG))
+		;
+}
+
+u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg)
+{
+	return omap_readl(timer->base + reg);
+}
+
+int omap_dm_timers_active(void)
+{
+	struct omap_dm_timer *timer;
+
+	for (timer = &dm_timers[0]; timer->base; ++timer)
+		if (omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG) &
+		    OMAP_TIMER_CTRL_ST)
+			return 1;
+
+	return 0;
+}
+
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+{
+	int n = (timer - dm_timers) << 1;
+	u32 l;
+
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l |= source << n;
+	omap_writel(l, MOD_CONF_CTRL_1);
+}
+
+
+static void omap_dm_timer_reset(struct omap_dm_timer *timer)
+{
+	/* Reset and set posted mode */
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06);
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, 0x02);
+
+	omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_ARMXOR);
+}
+
+
+
+struct omap_dm_timer * omap_dm_timer_request(void)
+{
+	struct omap_dm_timer *timer = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	if (!list_empty(&dm_timer_info.unused_timers)) {
+		timer = (struct omap_dm_timer *)
+				dm_timer_info.unused_timers.next;
+		list_move_tail((struct list_head *)timer,
+				&dm_timer_info.reserved_timers);
+	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+
+	return timer;
+}
+
+
+void omap_dm_timer_free(struct omap_dm_timer *timer)
+{
+	unsigned long flags;
+
+	omap_dm_timer_reset(timer);
+
+	spin_lock_irqsave(&dm_timer_lock, flags);
+	list_move_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
+}
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer,
+				unsigned int value)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value);
+}
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer)
+{
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_STAT_REG);
+}
+
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value);
+}
+
+void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer)
+{
+	u32 l;
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_AR;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_TRIGGER_REG, 1);
+}
+
+void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= value & 0x3;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_start(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_ST;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+void omap_dm_timer_stop(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l &= ~0x1;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer)
+{
+	return omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG);
+}
+
+void omap_dm_timer_reset_counter(struct omap_dm_timer *timer)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, 0);
+}
+
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_LOAD_REG, load);
+}
+
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match)
+{
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_MATCH_REG, match);
+}
+
+void omap_dm_timer_enable_compare(struct omap_dm_timer *timer)
+{
+	u32 l;
+
+	l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+	l |= OMAP_TIMER_CTRL_CE;
+	omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+}
+
+
+static inline void __dm_timer_init(void)
+{
+	struct omap_dm_timer *timer;
+
+	spin_lock_init(&dm_timer_lock);
+	INIT_LIST_HEAD(&dm_timer_info.unused_timers);
+	INIT_LIST_HEAD(&dm_timer_info.reserved_timers);
+
+	timer = &dm_timers[0];
+	while (timer->base) {
+		list_add_tail((struct list_head *)timer, &dm_timer_info.unused_timers);
+		omap_dm_timer_reset(timer);
+		timer++;
+	}
+}
+
+static int __init omap_dm_timer_init(void)
+{
+	if (cpu_is_omap16xx())
+		__dm_timer_init();
+	return 0;
+}
+
+arch_initcall(omap_dm_timer_init);

arch/arm/plat-omap/gpio.c

@@ -3,7 +3,7 @@
  *
  * Support functions for OMAP GPIO
  *
- * Copyright (C) 2003 Nokia Corporation
+ * Copyright (C) 2003-2005 Nokia Corporation
  * Written by Juha Yrjölä <juha.yrjola@nokia.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -17,8 +17,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/sysdev.h>
+#include <linux/err.h>
 
 #include <asm/hardware.h>
+#include <asm/hardware/clock.h>
 #include <asm/irq.h>
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>
@@ -29,7 +32,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		0xfffce000
+#define OMAP1510_GPIO_BASE		(void __iomem *)0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -43,34 +46,37 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		0xfffbe400
-#define OMAP1610_GPIO2_BASE		0xfffbec00
-#define OMAP1610_GPIO3_BASE		0xfffbb400
-#define OMAP1610_GPIO4_BASE		0xfffbbc00
+#define OMAP1610_GPIO1_BASE		(void __iomem *)0xfffbe400
+#define OMAP1610_GPIO2_BASE		(void __iomem *)0xfffbec00
+#define OMAP1610_GPIO3_BASE		(void __iomem *)0xfffbb400
+#define OMAP1610_GPIO4_BASE		(void __iomem *)0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
 #define OMAP1610_GPIO_IRQSTATUS1	0x0018
 #define OMAP1610_GPIO_IRQENABLE1	0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE	0x0028
 #define OMAP1610_GPIO_DATAIN		0x002c
 #define OMAP1610_GPIO_DATAOUT		0x0030
 #define OMAP1610_GPIO_DIRECTION		0x0034
 #define OMAP1610_GPIO_EDGE_CTRL1	0x0038
 #define OMAP1610_GPIO_EDGE_CTRL2	0x003c
 #define OMAP1610_GPIO_CLEAR_IRQENABLE1	0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA	0x00a8
 #define OMAP1610_GPIO_CLEAR_DATAOUT	0x00b0
 #define OMAP1610_GPIO_SET_IRQENABLE1	0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA	0x00e8
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
  * OMAP730 specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		0xfffbc000
-#define OMAP730_GPIO2_BASE		0xfffbc800
-#define OMAP730_GPIO3_BASE		0xfffbd000
-#define OMAP730_GPIO4_BASE		0xfffbd800
-#define OMAP730_GPIO5_BASE		0xfffbe000
-#define OMAP730_GPIO6_BASE		0xfffbe800
+#define OMAP730_GPIO1_BASE		(void __iomem *)0xfffbc000
+#define OMAP730_GPIO2_BASE		(void __iomem *)0xfffbc800
+#define OMAP730_GPIO3_BASE		(void __iomem *)0xfffbd000
+#define OMAP730_GPIO4_BASE		(void __iomem *)0xfffbd800
+#define OMAP730_GPIO5_BASE		(void __iomem *)0xfffbe000
+#define OMAP730_GPIO6_BASE		(void __iomem *)0xfffbe800
 #define OMAP730_GPIO_DATA_INPUT		0x00
 #define OMAP730_GPIO_DATA_OUTPUT	0x04
 #define OMAP730_GPIO_DIR_CONTROL	0x08
@@ -78,14 +84,43 @@
 #define OMAP730_GPIO_INT_MASK		0x10
 #define OMAP730_GPIO_INT_STATUS		0x14
 
+/*
+ * omap24xx specific GPIO registers
+ */
+#define OMAP24XX_GPIO1_BASE		(void __iomem *)0x48018000
+#define OMAP24XX_GPIO2_BASE		(void __iomem *)0x4801a000
+#define OMAP24XX_GPIO3_BASE		(void __iomem *)0x4801c000
+#define OMAP24XX_GPIO4_BASE		(void __iomem *)0x4801e000
+#define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_SYSCONFIG		0x0010
+#define OMAP24XX_GPIO_SYSSTATUS		0x0014
+#define OMAP24XX_GPIO_IRQSTATUS1	0x0018
+#define OMAP24XX_GPIO_IRQENABLE1	0x001c
+#define OMAP24XX_GPIO_CTRL		0x0030
+#define OMAP24XX_GPIO_OE		0x0034
+#define OMAP24XX_GPIO_DATAIN		0x0038
+#define OMAP24XX_GPIO_DATAOUT		0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0	0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1	0x0044
+#define OMAP24XX_GPIO_RISINGDETECT	0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT	0x004c
+#define OMAP24XX_GPIO_CLEARIRQENABLE1	0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1	0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA	0x0080
+#define OMAP24XX_GPIO_SETWKUENA		0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT	0x0090
+#define OMAP24XX_GPIO_SETDATAOUT	0x0094
+
 #define OMAP_MPUIO_MASK		(~OMAP_MAX_GPIO_LINES & 0xff)
 
 struct gpio_bank {
-	u32 base;
+	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
-	u8 method;
+	int method;
 	u32 reserved_map;
+	u32 suspend_wakeup;
+	u32 saved_wakeup;
 	spinlock_t lock;
 };
 
@@ -93,8 +128,9 @@ struct gpio_bank {
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
 #define METHOD_GPIO_730		3
+#define METHOD_GPIO_24XX	4
 
-#if defined(CONFIG_ARCH_OMAP16XX)
+#ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
 	{ OMAP_MPUIO_BASE,     INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
 	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
@@ -123,6 +159,15 @@ static struct gpio_bank gpio_bank_730[7] = {
 };
 #endif
 
+#ifdef CONFIG_ARCH_OMAP24XX
+static struct gpio_bank gpio_bank_24xx[4] = {
+	{ OMAP24XX_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
+	{ OMAP24XX_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+};
+#endif
+
 static struct gpio_bank *gpio_bank;
 static int gpio_bank_count;
 
@@ -149,14 +194,23 @@ static inline struct gpio_bank *get_gpio_bank(int gpio)
 		return &gpio_bank[1 + (gpio >> 5)];
 	}
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx())
+		return &gpio_bank[gpio >> 5];
+#endif
 }
 
 static inline int get_gpio_index(int gpio)
 {
+#ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730())
 		return gpio & 0x1f;
-	else
-		return gpio & 0x0f;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx())
+		return gpio & 0x1f;
+#endif
+	return gpio & 0x0f;
 }
 
 static inline int gpio_valid(int gpio)
@@ -179,6 +233,10 @@ static inline int gpio_valid(int gpio)
 #ifdef CONFIG_ARCH_OMAP730
 	if (cpu_is_omap730() && gpio < 192)
 		return 0;
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx() && gpio < 128)
+		return 0;
 #endif
 	return -1;
 }
@@ -195,7 +253,7 @@ static int check_gpio(int gpio)
 
 static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l;
 
 	switch (bank->method) {
@@ -211,6 +269,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DIR_CONTROL;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
 	}
 	l = __raw_readl(reg);
 	if (is_input)
@@ -234,7 +295,7 @@ void omap_set_gpio_direction(int gpio, int is_input)
 
 static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l = 0;
 
 	switch (bank->method) {
@@ -269,6 +330,13 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		else
 			l &= ~(1 << gpio);
 		break;
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETDATAOUT;
+		else
+			reg += OMAP24XX_GPIO_CLEARDATAOUT;
+		l = 1 << gpio;
+		break;
 	default:
 		BUG();
 		return;
@@ -291,7 +359,7 @@ void omap_set_gpio_dataout(int gpio, int enable)
 int omap_get_gpio_datain(int gpio)
 {
 	struct gpio_bank *bank;
-	u32 reg;
+	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -1;
@@ -310,109 +378,132 @@ int omap_get_gpio_datain(int gpio)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_DATA_INPUT;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAIN;
+		break;
 	default:
 		BUG();
 		return -1;
 	}
-	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+	return (__raw_readl(reg)
+			& (1 << get_gpio_index(gpio))) != 0;
 }
 
-static void _set_gpio_edge_ctrl(struct gpio_bank *bank, int gpio, int edge)
+#define MOD_REG_BIT(reg, bit_mask, set)	\
+do {	\
+	int l = __raw_readl(base + reg); \
+	if (set) l |= bit_mask; \
+	else l &= ~bit_mask; \
+	__raw_writel(l, base + reg); \
+} while(0)
+
+static inline void set_24xx_gpio_triggering(void __iomem *base, int gpio, int trigger)
 {
-	u32 reg = bank->base;
-	u32 l;
+	u32 gpio_bit = 1 << gpio;
+
+	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
+		trigger & IRQT_LOW);
+	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
+		trigger & IRQT_HIGH);
+	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
+		trigger & IRQT_RISING);
+	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
+		trigger & IRQT_FALLING);
+	/* FIXME: Possibly do 'set_irq_handler(j, do_level_IRQ)' if only level
+	 * triggering requested. */
+}
+
+static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
 		break;
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
 		break;
 	case METHOD_GPIO_1610:
-		edge &= 0x03;
 		if (gpio & 0x08)
 			reg += OMAP1610_GPIO_EDGE_CTRL2;
 		else
 			reg += OMAP1610_GPIO_EDGE_CTRL1;
 		gpio &= 0x07;
+		/* We allow only edge triggering, i.e. two lowest bits */
+		if (trigger & ~IRQT_BOTHEDGE)
+			BUG();
+		/* NOTE: knows __IRQT_{FAL,RIS}EDGE match OMAP hardware */
+		trigger &= 0x03;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		l |= edge << (gpio << 1);
-		__raw_writel(l, reg);
+		l |= trigger << (gpio << 1);
 		break;
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (edge == OMAP_GPIO_RISING_EDGE)
+		if (trigger == IRQT_RISING)
 			l |= 1 << gpio;
-		else
+		else if (trigger == IRQT_FALLING)
 			l &= ~(1 << gpio);
-		__raw_writel(l, reg);
+		else
+			goto bad;
+		break;
+	case METHOD_GPIO_24XX:
+		set_24xx_gpio_triggering(reg, gpio, trigger);
 		break;
 	default:
 		BUG();
-		return;
+		goto bad;
 	}
+	__raw_writel(l, reg);
+	return 0;
+bad:
+	return -EINVAL;
 }
 
-void omap_set_gpio_edge_ctrl(int gpio, int edge)
+static int gpio_irq_type(unsigned irq, unsigned type)
 {
 	struct gpio_bank *bank;
+	unsigned gpio;
+	int retval;
+
+	if (irq > IH_MPUIO_BASE)
+		gpio = OMAP_MPUIO(irq - IH_MPUIO_BASE);
+	else
+		gpio = irq - IH_GPIO_BASE;
 
 	if (check_gpio(gpio) < 0)
-		return;
+		return -EINVAL;
+
+	if (type & (__IRQT_LOWLVL|__IRQT_HIGHLVL|IRQT_PROBE))
+		return -EINVAL;
+
 	bank = get_gpio_bank(gpio);
 	spin_lock(&bank->lock);
-	_set_gpio_edge_ctrl(bank, get_gpio_index(gpio), edge);
+	retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
 	spin_unlock(&bank->lock);
-}
-
-
-static int _get_gpio_edge_ctrl(struct gpio_bank *bank, int gpio)
-{
-	u32 reg = bank->base, l;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		l = __raw_readl(reg + OMAP_MPUIO_GPIO_INT_EDGE);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	case METHOD_GPIO_1510:
-		l = __raw_readl(reg + OMAP1510_GPIO_INT_CONTROL);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	case METHOD_GPIO_1610:
-		if (gpio & 0x08)
-			reg += OMAP1610_GPIO_EDGE_CTRL2;
-		else
-			reg += OMAP1610_GPIO_EDGE_CTRL1;
-		return (__raw_readl(reg) >> ((gpio & 0x07) << 1)) & 0x03;
-	case METHOD_GPIO_730:
-		l = __raw_readl(reg + OMAP730_GPIO_INT_CONTROL);
-		return (l & (1 << gpio)) ?
-			OMAP_GPIO_RISING_EDGE : OMAP_GPIO_FALLING_EDGE;
-	default:
-		BUG();
-		return -1;
-	}
+	return retval;
 }
 
 static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 
 	switch (bank->method) {
 	case METHOD_MPUIO:
@@ -428,6 +519,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_STATUS;
 		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_IRQSTATUS1;
+		break;
 	default:
 		BUG();
 		return;
@@ -442,7 +536,7 @@ static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
 
 static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
 {
-	u32 reg = bank->base;
+	void __iomem *reg = bank->base;
 	u32 l;
 
 	switch (bank->method) {
@@ -477,6 +571,13 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		else
 			l |= gpio_mask;
 		break;
+	case METHOD_GPIO_24XX:
+		if (enable)
+			reg += OMAP24XX_GPIO_SETIRQENABLE1;
+		else
+			reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
+		l = gpio_mask;
+		break;
 	default:
 		BUG();
 		return;
@@ -489,6 +590,50 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
 	_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
 }
 
+/*
+ * Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
+ * 1510 does not seem to have a wake-up register. If JTAG is connected
+ * to the target, system will wake up always on GPIO events. While
+ * system is running all registered GPIO interrupts need to have wake-up
+ * enabled. When system is suspended, only selected GPIO interrupts need
+ * to have wake-up enabled.
+ */
+static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
+{
+	switch (bank->method) {
+	case METHOD_GPIO_1610:
+	case METHOD_GPIO_24XX:
+		spin_lock(&bank->lock);
+		if (enable)
+			bank->suspend_wakeup |= (1 << gpio);
+		else
+			bank->suspend_wakeup &= ~(1 << gpio);
+		spin_unlock(&bank->lock);
+		return 0;
+	default:
+		printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
+		       bank->method);
+		return -EINVAL;
+	}
+}
+
+/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
+static int gpio_wake_enable(unsigned int irq, unsigned int enable)
+{
+	unsigned int gpio = irq - IH_GPIO_BASE;
+	struct gpio_bank *bank;
+	int retval;
+
+	if (check_gpio(gpio) < 0)
+		return -ENODEV;
+	bank = get_gpio_bank(gpio);
+	spin_lock(&bank->lock);
+	retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
+	spin_unlock(&bank->lock);
+
+	return retval;
+}
+
 int omap_request_gpio(int gpio)
 {
 	struct gpio_bank *bank;
@@ -505,14 +650,32 @@ int omap_request_gpio(int gpio)
 		return -1;
 	}
 	bank->reserved_map |= (1 << get_gpio_index(gpio));
+
+	/* Set trigger to none. You need to enable the trigger after request_irq */
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+
 #ifdef CONFIG_ARCH_OMAP1510
 	if (bank->method == METHOD_GPIO_1510) {
-		u32 reg;
+		void __iomem *reg;
 
-		/* Claim the pin for the ARM */
+		/* Claim the pin for MPU */
 		reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
 		__raw_writel(__raw_readl(reg) | (1 << get_gpio_index(gpio)), reg);
 	}
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Enable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Enable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_SETWKUENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
 #endif
 	spin_unlock(&bank->lock);
 
@@ -533,6 +696,20 @@ void omap_free_gpio(int gpio)
 		spin_unlock(&bank->lock);
 		return;
 	}
+#ifdef CONFIG_ARCH_OMAP16XX
+	if (bank->method == METHOD_GPIO_1610) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX) {
+		/* Disable wake-up during idle for dynamic tick */
+		void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+		__raw_writel(1 << get_gpio_index(gpio), reg);
+	}
+#endif
 	bank->reserved_map &= ~(1 << get_gpio_index(gpio));
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
@@ -552,7 +729,7 @@ void omap_free_gpio(int gpio)
 static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 			     struct pt_regs *regs)
 {
-	u32 isr_reg = 0;
+	void __iomem *isr_reg = NULL;
 	u32 isr;
 	unsigned int gpio_irq;
 	struct gpio_bank *bank;
@@ -574,24 +751,30 @@ static void gpio_irq_handler(unsigned int irq, struct irqdesc *desc,
 	if (bank->method == METHOD_GPIO_730)
 		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
 #endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (bank->method == METHOD_GPIO_24XX)
+		isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
+#endif
 
-	isr = __raw_readl(isr_reg);
-	_enable_gpio_irqbank(bank, isr, 0);
-	_clear_gpio_irqbank(bank, isr);
-	_enable_gpio_irqbank(bank, isr, 1);
-	desc->chip->unmask(irq);
-
-	if (unlikely(!isr))
-		return;
-
-	gpio_irq = bank->virtual_irq_start;
-	for (; isr != 0; isr >>= 1, gpio_irq++) {
-		struct irqdesc *d;
-		if (!(isr & 1))
-			continue;
-		d = irq_desc + gpio_irq;
-		desc_handle_irq(gpio_irq, d, regs);
-	}
+	while(1) {
+		isr = __raw_readl(isr_reg);
+		_enable_gpio_irqbank(bank, isr, 0);
+		_clear_gpio_irqbank(bank, isr);
+		_enable_gpio_irqbank(bank, isr, 1);
+		desc->chip->unmask(irq);
+
+		if (!isr)
+			break;
+
+		gpio_irq = bank->virtual_irq_start;
+		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			struct irqdesc *d;
+			if (!(isr & 1))
+				continue;
+			d = irq_desc + gpio_irq;
+			desc_handle_irq(gpio_irq, d, regs);
+		}
+        }
 }
 
 static void gpio_ack_irq(unsigned int irq)
@@ -613,14 +796,10 @@ static void gpio_mask_irq(unsigned int irq)
 static void gpio_unmask_irq(unsigned int irq)
 {
 	unsigned int gpio = irq - IH_GPIO_BASE;
+	unsigned int gpio_idx = get_gpio_index(gpio);
 	struct gpio_bank *bank = get_gpio_bank(gpio);
 
-	if (_get_gpio_edge_ctrl(bank, get_gpio_index(gpio)) == OMAP_GPIO_NO_EDGE) {
-		printk(KERN_ERR "OMAP GPIO %d: trying to enable GPIO IRQ while no edge is set\n",
-		       gpio);
-		_set_gpio_edge_ctrl(bank, get_gpio_index(gpio), OMAP_GPIO_RISING_EDGE);
-	}
-	_set_gpio_irqenable(bank, gpio, 1);
+	_set_gpio_irqenable(bank, gpio_idx, 1);
 }
 
 static void mpuio_ack_irq(unsigned int irq)
@@ -645,9 +824,11 @@ static void mpuio_unmask_irq(unsigned int irq)
 }
 
 static struct irqchip gpio_irq_chip = {
-	.ack	= gpio_ack_irq,
-	.mask	= gpio_mask_irq,
-	.unmask = gpio_unmask_irq,
+	.ack		= gpio_ack_irq,
+	.mask		= gpio_mask_irq,
+	.unmask		= gpio_unmask_irq,
+	.set_type	= gpio_irq_type,
+	.set_wake	= gpio_wake_enable,
 };
 
 static struct irqchip mpuio_irq_chip = {
@@ -657,6 +838,7 @@ static struct irqchip mpuio_irq_chip = {
 };
 
 static int initialized = 0;
+static struct clk * gpio_ck = NULL;
 
 static int __init _omap_gpio_init(void)
 {
@@ -665,6 +847,14 @@ static int __init _omap_gpio_init(void)
 
 	initialized = 1;
 
+	if (cpu_is_omap1510()) {
+		gpio_ck = clk_get(NULL, "arm_gpio_ck");
+		if (IS_ERR(gpio_ck))
+			printk("Could not get arm_gpio_ck\n");
+		else
+			clk_use(gpio_ck);
+	}
+
 #ifdef CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
 		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
@@ -674,7 +864,7 @@ static int __init _omap_gpio_init(void)
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		int rev;
+		u32 rev;
 
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
@@ -689,6 +879,17 @@ static int __init _omap_gpio_init(void)
 		gpio_bank_count = 7;
 		gpio_bank = gpio_bank_730;
 	}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+	if (cpu_is_omap24xx()) {
+		int rev;
+
+		gpio_bank_count = 4;
+		gpio_bank = gpio_bank_24xx;
+		rev = omap_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+		printk(KERN_INFO "OMAP24xx GPIO hardware version %d.%d\n",
+			(rev >> 4) & 0x0f, rev & 0x0f);
+	}
 #endif
 	for (i = 0; i < gpio_bank_count; i++) {
 		int j, gpio_count = 16;
@@ -710,6 +911,7 @@ static int __init _omap_gpio_init(void)
 		if (bank->method == METHOD_GPIO_1610) {
 			__raw_writew(0x0000, bank->base + OMAP1610_GPIO_IRQENABLE1);
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
+			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
 #endif
 #ifdef CONFIG_ARCH_OMAP730
@@ -719,6 +921,14 @@ static int __init _omap_gpio_init(void)
 
 			gpio_count = 32; /* 730 has 32-bit GPIOs */
 		}
+#endif
+#ifdef CONFIG_ARCH_OMAP24XX
+		if (bank->method == METHOD_GPIO_24XX) {
+			__raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1);
+			__raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1);
+
+			gpio_count = 32;
+		}
 #endif
 		for (j = bank->virtual_irq_start;
 		     j < bank->virtual_irq_start + gpio_count; j++) {
@@ -735,12 +945,97 @@ static int __init _omap_gpio_init(void)
 
 	/* Enable system clock for GPIO module.
 	 * The CAM_CLK_CTRL *is* really the right place. */
-	if (cpu_is_omap1610() || cpu_is_omap1710())
+	if (cpu_is_omap16xx())
 		omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04, ULPD_CAM_CLK_CTRL);
 
 	return 0;
 }
 
+#if defined (CONFIG_ARCH_OMAP16XX) || defined (CONFIG_ARCH_OMAP24XX)
+static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
+{
+	int i;
+
+	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_status;
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+
+		switch (bank->method) {
+		case METHOD_GPIO_1610:
+			wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		case METHOD_GPIO_24XX:
+			wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
+			wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
+			break;
+		default:
+			continue;
+		}
+
+		spin_lock(&bank->lock);
+		bank->saved_wakeup = __raw_readl(wake_status);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->suspend_wakeup, wake_set);
+		spin_unlock(&bank->lock);
+	}
+
+	return 0;
+}
+
+static int omap_gpio_resume(struct sys_device *dev)
+{
+	int i;
+
+	if (!cpu_is_omap24xx() && !cpu_is_omap16xx())
+		return 0;
+
+	for (i = 0; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		void __iomem *wake_clear;
+		void __iomem *wake_set;
+
+		switch (bank->method) {
+		case METHOD_GPIO_1610:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		case METHOD_GPIO_24XX:
+			wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
+			wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
+			break;
+		default:
+			continue;
+		}
+
+		spin_lock(&bank->lock);
+		__raw_writel(0xffffffff, wake_clear);
+		__raw_writel(bank->saved_wakeup, wake_set);
+		spin_unlock(&bank->lock);
+	}
+
+	return 0;
+}
+
+static struct sysdev_class omap_gpio_sysclass = {
+	set_kset_name("gpio"),
+	.suspend	= omap_gpio_suspend,
+	.resume		= omap_gpio_resume,
+};
+
+static struct sys_device omap_gpio_device = {
+	.id		= 0,
+	.cls		= &omap_gpio_sysclass,
+};
+#endif
+
 /*
  * This may get called early from board specific init
  */
@@ -752,11 +1047,30 @@ int omap_gpio_init(void)
 		return 0;
 }
 
+static int __init omap_gpio_sysinit(void)
+{
+	int ret = 0;
+
+	if (!initialized)
+		ret = _omap_gpio_init();
+
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX)
+	if (cpu_is_omap16xx() || cpu_is_omap24xx()) {
+		if (ret == 0) {
+			ret = sysdev_class_register(&omap_gpio_sysclass);
+			if (ret == 0)
+				ret = sysdev_register(&omap_gpio_device);
+		}
+	}
+#endif
+
+	return ret;
+}
+
 EXPORT_SYMBOL(omap_request_gpio);
 EXPORT_SYMBOL(omap_free_gpio);
 EXPORT_SYMBOL(omap_set_gpio_direction);
 EXPORT_SYMBOL(omap_set_gpio_dataout);
 EXPORT_SYMBOL(omap_get_gpio_datain);
-EXPORT_SYMBOL(omap_set_gpio_edge_ctrl);
 
-arch_initcall(omap_gpio_init);
+arch_initcall(omap_gpio_sysinit);

arch/arm/plat-omap/mcbsp.c

@@ -27,6 +27,7 @@
 #include <asm/arch/dma.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/irqs.h>
+#include <asm/arch/dsp_common.h>
 #include <asm/arch/mcbsp.h>
 
 #include <asm/hardware/clock.h>
@@ -187,9 +188,6 @@ static int omap_mcbsp_check(unsigned int id)
 	return -1;
 }
 
-#define EN_XORPCK		1
-#define DSP_RSTCT2              0xe1008014
-
 static void omap_mcbsp_dsp_request(void)
 {
 	if (cpu_is_omap1510() || cpu_is_omap16xx()) {
@@ -198,6 +196,11 @@ static void omap_mcbsp_dsp_request(void)
 
 		/* enable 12MHz clock to mcbsp 1 & 3 */
 		clk_use(mcbsp_dspxor_ck);
+
+		/*
+		 * DSP external peripheral reset
+		 * FIXME: This should be moved to dsp code
+		 */
 		__raw_writew(__raw_readw(DSP_RSTCT2) | 1 | 1 << 1,
 			     DSP_RSTCT2);
 	}

arch/arm/plat-omap/mux.c

@@ -48,6 +48,9 @@ omap_cfg_reg(const reg_cfg_t reg_cfg)
 		pull_orig = 0, pull = 0;
 	unsigned int mask, warn = 0;
 
+	if (cpu_is_omap7xx())
+		return 0;
+
 	if (reg_cfg > ARRAY_SIZE(reg_cfg_table)) {
 		printk(KERN_ERR "MUX: reg_cfg %d\n", reg_cfg);
 		return -EINVAL;

arch/arm/plat-omap/ocpi.c

@@ -25,6 +25,7 @@
 
 #include <linux/config.h>
 #include <linux/module.h>
+#include <linux/version.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>

arch/arm/plat-omap/pm.c

@@ -39,24 +39,32 @@
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
 #include <linux/pm.h>
+#include <linux/interrupt.h>
 
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/mach/time.h>
-#include <asm/mach-types.h>
+#include <asm/mach/irq.h>
 
-#include <asm/arch/omap16xx.h>
+#include <asm/mach-types.h>
+#include <asm/arch/irqs.h>
+#include <asm/arch/tc.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
 #include <asm/arch/tps65010.h>
+#include <asm/arch/dsp_common.h>
 
 #include "clock.h"
+#include "sram.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
+static void (*omap_sram_idle)(void) = NULL;
+static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
+
 /*
  * Let's power down on idle, but only if we are really
  * idle, because once we start down the path of
@@ -65,7 +73,6 @@ static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
  */
 void omap_pm_idle(void)
 {
-	int (*func_ptr)(void) = 0;
 	unsigned int mask32 = 0;
 
 	/*
@@ -83,6 +90,13 @@ void omap_pm_idle(void)
 	}
 	mask32 = omap_readl(ARM_SYSST);
 
+	/*
+	 * Prevent the ULPD from entering low power state by setting
+	 * POWER_CTRL_REG:4 = 0
+	 */
+	omap_writew(omap_readw(ULPD_POWER_CTRL) &
+		    ~ULPD_DEEP_SLEEP_TRANSITION_EN, ULPD_POWER_CTRL);
+
 	/*
 	 * Since an interrupt may set up a timer, we don't want to
 	 * reprogram the hardware timer with interrupts enabled.
@@ -92,18 +106,9 @@ void omap_pm_idle(void)
 
 	if ((mask32 & DSP_IDLE) == 0) {
 		__asm__ volatile ("mcr	p15, 0, r0, c7, c0, 4");
-	} else {
-
-		if (cpu_is_omap1510()) {
-			func_ptr = (void *)(OMAP1510_SRAM_IDLE_SUSPEND);
-		} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
-			func_ptr = (void *)(OMAP1610_SRAM_IDLE_SUSPEND);
-		} else if (cpu_is_omap5912()) {
-			func_ptr = (void *)(OMAP5912_SRAM_IDLE_SUSPEND);
-		}
+	} else
+		omap_sram_idle();
 
-		func_ptr();
-	}
 	local_fiq_enable();
 	local_irq_enable();
 }
@@ -115,58 +120,55 @@ void omap_pm_idle(void)
  */
 static void omap_pm_wakeup_setup(void)
 {
-	/*
-	 * Enable ARM XOR clock and release peripheral from reset by
-	 * writing 1 to PER_EN bit in ARM_RSTCT2, this is required
-	 * for UART configuration to use UART2 to wake up.
-	 */
-
-	omap_writel(omap_readl(ARM_IDLECT2) | ENABLE_XORCLK, ARM_IDLECT2);
-	omap_writel(omap_readl(ARM_RSTCT2) | PER_EN, ARM_RSTCT2);
-	omap_writew(MODEM_32K_EN, ULPD_CLOCK_CTRL);
+	u32 level1_wake = OMAP_IRQ_BIT(INT_IH2_IRQ);
+	u32 level2_wake = OMAP_IRQ_BIT(INT_UART2) | OMAP_IRQ_BIT(INT_KEYBOARD);
 
 	/*
-	 * Turn off all interrupts except L1-2nd level cascade,
-	 * and the L2 wakeup interrupts: keypad and UART2.
+	 * Turn off all interrupts except GPIO bank 1, L1-2nd level cascade,
+	 * and the L2 wakeup interrupts: keypad and UART2. Note that the
+	 * drivers must still separately call omap_set_gpio_wakeup() to
+	 * wake up to a GPIO interrupt.
 	 */
+	if (cpu_is_omap1510() || cpu_is_omap16xx())
+		level1_wake |= OMAP_IRQ_BIT(INT_GPIO_BANK1);
+	else if (cpu_is_omap730())
+		level1_wake |= OMAP_IRQ_BIT(INT_730_GPIO_BANK1);
 
-	omap_writel(~IRQ_LEVEL2, OMAP_IH1_MIR);
+	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap1510()) {
-		omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD),  OMAP_IH2_MIR);
-	}
+	if (cpu_is_omap1510())
+		omap_writel(~level2_wake,  OMAP_IH2_MIR);
 
+	/* INT_1610_WAKE_UP_REQ is needed for GPIO wakeup... */
 	if (cpu_is_omap16xx()) {
-		omap_writel(~(IRQ_UART2 | IRQ_KEYBOARD), OMAP_IH2_0_MIR);
-
-		omap_writel(~0x0, OMAP_IH2_1_MIR);
+		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
+		omap_writel(~OMAP_IRQ_BIT(INT_1610_WAKE_UP_REQ), OMAP_IH2_1_MIR);
 		omap_writel(~0x0, OMAP_IH2_2_MIR);
 		omap_writel(~0x0, OMAP_IH2_3_MIR);
 	}
 
-	/*  New IRQ agreement */
+	/*  New IRQ agreement, recalculate in cascade order */
+	omap_writel(1, OMAP_IH2_CONTROL);
  	omap_writel(1, OMAP_IH1_CONTROL);
-
-	/* external PULL to down, bit 22 = 0 */
-	omap_writel(omap_readl(PULL_DWN_CTRL_2) & ~(1<<22), PULL_DWN_CTRL_2);
 }
 
 void omap_pm_suspend(void)
 {
-	unsigned int mask32 = 0;
 	unsigned long arg0 = 0, arg1 = 0;
-	int (*func_ptr)(unsigned short, unsigned short) = 0;
-	unsigned short save_dsp_idlect2;
 
-	printk("PM: OMAP%x is entering deep sleep now ...\n", system_rev);
+	printk("PM: OMAP%x is trying to enter deep sleep...\n", system_rev);
+
+	omap_serial_wake_trigger(1);
 
 	if (machine_is_omap_osk()) {
 		/* Stop LED1 (D9) blink */
 		tps65010_set_led(LED1, OFF);
 	}
 
+	omap_writew(0xffff, ULPD_SOFT_DISABLE_REQ_REG);
+
 	/*
-	 * Step 1: turn off interrupts
+	 * Step 1: turn off interrupts (FIXME: NOTE: already disabled)
 	 */
 
 	local_irq_disable();
@@ -207,6 +209,8 @@ void omap_pm_suspend(void)
 	ARM_SAVE(ARM_CKCTL);
 	ARM_SAVE(ARM_IDLECT1);
 	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap1510()))
+		ARM_SAVE(ARM_IDLECT3);
 	ARM_SAVE(ARM_EWUPCT);
 	ARM_SAVE(ARM_RSTCT1);
 	ARM_SAVE(ARM_RSTCT2);
@@ -214,42 +218,12 @@ void omap_pm_suspend(void)
 	ULPD_SAVE(ULPD_CLOCK_CTRL);
 	ULPD_SAVE(ULPD_STATUS_REQ);
 
-	/*
-	 * Step 3: LOW_PWR signal enabling
-	 *
-	 * Allow the LOW_PWR signal to be visible on MPUIO5 ball.
-	 */
-	if (cpu_is_omap1510()) {
-		/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) |
-			    OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	} else if (cpu_is_omap16xx()) {
-		/* POWER_CTRL_REG = 0x1 (LOW_POWER is available) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) |
-			    OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	}
-
-	/* configure LOW_PWR pin */
-	omap_cfg_reg(T20_1610_LOW_PWR);
+	/* (Step 3 removed - we now allow deep sleep by default) */
 
 	/*
 	 * Step 4: OMAP DSP Shutdown
 	 */
 
-	/* Set DSP_RST = 1 and DSP_EN = 0, put DSP block into reset */
-	omap_writel((omap_readl(ARM_RSTCT1) | DSP_RST) & ~DSP_ENABLE,
-		    ARM_RSTCT1);
-
-	/* Set DSP boot mode to DSP-IDLE, DSP_BOOT_MODE = 0x2 */
-        omap_writel(DSP_IDLE_MODE, MPUI_DSP_BOOT_CONFIG);
-
-	/* Set EN_DSPCK = 0, stop DSP block clock */
-	omap_writel(omap_readl(ARM_CKCTL) & ~DSP_CLOCK_ENABLE, ARM_CKCTL);
-
-	/* Stop any DSP domain clocks */
-	omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
-	save_dsp_idlect2 = __raw_readw(DSP_IDLECT2);
-	__raw_writew(0, DSP_IDLECT2);
 
 	/*
 	 * Step 5: Wakeup Event Setup
@@ -258,24 +232,9 @@ void omap_pm_suspend(void)
 	omap_pm_wakeup_setup();
 
 	/*
-	 * Step 6a: ARM and Traffic controller shutdown
-	 *
-	 * Step 6 starts here with clock and watchdog disable
+	 * Step 6: ARM and Traffic controller shutdown
 	 */
 
-	/* stop clocks */
-	mask32 = omap_readl(ARM_IDLECT2);
-	mask32 &= ~(1<<EN_WDTCK);  /* bit 0 -> 0 (WDT clock) */
-	mask32 |=  (1<<EN_XORPCK); /* bit 1 -> 1 (XORPCK clock) */
-	mask32 &= ~(1<<EN_PERCK);  /* bit 2 -> 0 (MPUPER_CK clock) */
-	mask32 &= ~(1<<EN_LCDCK);  /* bit 3 -> 0 (LCDC clock) */
-	mask32 &= ~(1<<EN_LBCK);   /* bit 4 -> 0 (local bus clock) */
-	mask32 |=  (1<<EN_APICK);  /* bit 6 -> 1 (MPUI clock) */
-	mask32 &= ~(1<<EN_TIMCK);  /* bit 7 -> 0 (MPU timer clock) */
-	mask32 &= ~(1<<DMACK_REQ); /* bit 8 -> 0 (DMAC clock) */
-	mask32 &= ~(1<<EN_GPIOCK); /* bit 9 -> 0 (GPIO clock) */
-	omap_writel(mask32, ARM_IDLECT2);
-
 	/* disable ARM watchdog */
 	omap_writel(0x00F5, OMAP_WDT_TIMER_MODE);
 	omap_writel(0x00A0, OMAP_WDT_TIMER_MODE);
@@ -295,47 +254,24 @@ void omap_pm_suspend(void)
 	arg0 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT1];
 	arg1 = arm_sleep_save[ARM_SLEEP_SAVE_ARM_IDLECT2];
 
-	if (cpu_is_omap1510()) {
-		func_ptr = (void *)(OMAP1510_SRAM_API_SUSPEND);
-	} else if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		func_ptr = (void *)(OMAP1610_SRAM_API_SUSPEND);
-	} else if (cpu_is_omap5912()) {
-		func_ptr = (void *)(OMAP5912_SRAM_API_SUSPEND);
-	}
-
 	/*
 	 * Step 6c: ARM and Traffic controller shutdown
 	 *
 	 * Jump to assembly code. The processor will stay there
  	 * until wake up.
 	 */
-
-        func_ptr(arg0, arg1);
+        omap_sram_suspend(arg0, arg1);
 
 	/*
 	 * If we are here, processor is woken up!
 	 */
 
-	if (cpu_is_omap1510()) {
-		/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) &
-			    ~OMAP1510_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	} else if (cpu_is_omap16xx()) {
-		/* POWER_CTRL_REG = 0x0 (LOW_POWER is disabled) */
-		omap_writew(omap_readw(ULPD_POWER_CTRL) &
-			    ~OMAP1610_ULPD_LOW_POWER_REQ, ULPD_POWER_CTRL);
-	}
-
-
-	/* Restore DSP clocks */
-	omap_writel(omap_readl(ARM_IDLECT2) | (1<<EN_APICK), ARM_IDLECT2);
-	__raw_writew(save_dsp_idlect2, DSP_IDLECT2);
-	ARM_RESTORE(ARM_IDLECT2);
-
 	/*
 	 * Restore ARM state, except ARM_IDLECT1/2 which omap_cpu_suspend did
 	 */
 
+	if (!(cpu_is_omap1510()))
+		ARM_RESTORE(ARM_IDLECT3);
 	ARM_RESTORE(ARM_CKCTL);
 	ARM_RESTORE(ARM_EWUPCT);
 	ARM_RESTORE(ARM_RSTCT1);
@@ -366,6 +302,8 @@ void omap_pm_suspend(void)
 		MPUI1610_RESTORE(OMAP_IH2_3_MIR);
 	}
 
+	omap_writew(0, ULPD_SOFT_DISABLE_REQ_REG);
+
 	/*
 	 * Reenable interrupts
 	 */
@@ -373,6 +311,8 @@ void omap_pm_suspend(void)
 	local_irq_enable();
 	local_fiq_enable();
 
+	omap_serial_wake_trigger(0);
+
 	printk("PM: OMAP%x is re-starting from deep sleep...\n", system_rev);
 
 	if (machine_is_omap_osk()) {
@@ -401,6 +341,8 @@ static int omap_pm_read_proc(
 	ARM_SAVE(ARM_CKCTL);
 	ARM_SAVE(ARM_IDLECT1);
 	ARM_SAVE(ARM_IDLECT2);
+	if (!(cpu_is_omap1510()))
+		ARM_SAVE(ARM_IDLECT3);
 	ARM_SAVE(ARM_EWUPCT);
 	ARM_SAVE(ARM_RSTCT1);
 	ARM_SAVE(ARM_RSTCT2);
@@ -436,6 +378,7 @@ static int omap_pm_read_proc(
 		   "ARM_CKCTL_REG:            0x%-8x     \n"
 		   "ARM_IDLECT1_REG:          0x%-8x     \n"
 		   "ARM_IDLECT2_REG:          0x%-8x     \n"
+		   "ARM_IDLECT3_REG:	      0x%-8x     \n"
 		   "ARM_EWUPCT_REG:           0x%-8x     \n"
 		   "ARM_RSTCT1_REG:           0x%-8x     \n"
 		   "ARM_RSTCT2_REG:           0x%-8x     \n"
@@ -449,6 +392,7 @@ static int omap_pm_read_proc(
 		   ARM_SHOW(ARM_CKCTL),
 		   ARM_SHOW(ARM_IDLECT1),
 		   ARM_SHOW(ARM_IDLECT2),
+		   ARM_SHOW(ARM_IDLECT3),
 		   ARM_SHOW(ARM_EWUPCT),
 		   ARM_SHOW(ARM_RSTCT1),
 		   ARM_SHOW(ARM_RSTCT2),
@@ -507,7 +451,7 @@ static void omap_pm_init_proc(void)
 
 	entry = create_proc_read_entry("driver/omap_pm",
 				       S_IWUSR | S_IRUGO, NULL,
-				       omap_pm_read_proc, 0);
+	   omap_pm_read_proc, NULL);
 }
 
 #endif /* DEBUG && CONFIG_PROC_FS */
@@ -580,7 +524,21 @@ static int omap_pm_finish(suspend_state_t state)
 }
 
 
-struct pm_ops omap_pm_ops ={
+static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
+				     struct pt_regs *  regs)
+{
+	return IRQ_HANDLED;
+}
+
+static struct irqaction omap_wakeup_irq = {
+	.name		= "peripheral wakeup",
+	.flags		= SA_INTERRUPT,
+	.handler	= omap_wakeup_interrupt
+};
+
+
+
+static struct pm_ops omap_pm_ops ={
 	.pm_disk_mode = 0,
         .prepare        = omap_pm_prepare,
         .enter          = omap_pm_enter,
@@ -590,42 +548,61 @@ struct pm_ops omap_pm_ops ={
 static int __init omap_pm_init(void)
 {
 	printk("Power Management for TI OMAP.\n");
-	pm_idle = omap_pm_idle;
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-
-#ifdef	CONFIG_ARCH_OMAP1510
 	if (cpu_is_omap1510()) {
-		memcpy((void *)OMAP1510_SRAM_IDLE_SUSPEND,
-		       omap1510_idle_loop_suspend,
-		       omap1510_idle_loop_suspend_sz);
-		memcpy((void *)OMAP1510_SRAM_API_SUSPEND, omap1510_cpu_suspend,
-		       omap1510_cpu_suspend_sz);
-	} else
-#endif
-	if (cpu_is_omap1610() || cpu_is_omap1710()) {
-		memcpy((void *)OMAP1610_SRAM_IDLE_SUSPEND,
-		       omap1610_idle_loop_suspend,
-		       omap1610_idle_loop_suspend_sz);
-		memcpy((void *)OMAP1610_SRAM_API_SUSPEND, omap1610_cpu_suspend,
-		       omap1610_cpu_suspend_sz);
-	} else if (cpu_is_omap5912()) {
-		memcpy((void *)OMAP5912_SRAM_IDLE_SUSPEND,
-		       omap1610_idle_loop_suspend,
-		       omap1610_idle_loop_suspend_sz);
-		memcpy((void *)OMAP5912_SRAM_API_SUSPEND, omap1610_cpu_suspend,
-		       omap1610_cpu_suspend_sz);
+		omap_sram_idle = omap_sram_push(omap1510_idle_loop_suspend,
+						omap1510_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
+						   omap1510_cpu_suspend_sz);
+	} else if (cpu_is_omap16xx()) {
+		omap_sram_idle = omap_sram_push(omap1610_idle_loop_suspend,
+						omap1610_idle_loop_suspend_sz);
+		omap_sram_suspend = omap_sram_push(omap1610_cpu_suspend,
+						   omap1610_cpu_suspend_sz);
 	}
 
+	if (omap_sram_idle == NULL || omap_sram_suspend == NULL) {
+		printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
+		return -ENODEV;
+	}
+
+	pm_idle = omap_pm_idle;
+
+	setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
+#if 0
+	/* --- BEGIN BOARD-DEPENDENT CODE --- */
+	/* Sleepx mask direction */
+	omap_writew((omap_readw(0xfffb5008) & ~2), 0xfffb5008);
+	/* Unmask sleepx signal */
+	omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004);
+	/* --- END BOARD-DEPENDENT CODE --- */
+#endif
+
+	/* Program new power ramp-up time
+	 * (0 for most boards since we don't lower voltage when in deep sleep)
+	 */
+	omap_writew(ULPD_SETUP_ANALOG_CELL_3_VAL, ULPD_SETUP_ANALOG_CELL_3);
+
+	/* Setup ULPD POWER_CTRL_REG - enter deep sleep whenever possible */
+	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
+
+	/* Configure IDLECT3 */
+	if (cpu_is_omap16xx())
+		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
+
 	pm_set_ops(&omap_pm_ops);
 
 #if defined(DEBUG) && defined(CONFIG_PROC_FS)
 	omap_pm_init_proc();
 #endif
 
+	/* configure LOW_PWR pin */
+	omap_cfg_reg(T20_1610_LOW_PWR);
+
 	return 0;
 }
 __initcall(omap_pm_init);

arch/arm/plat-omap/sleep.S

@@ -66,7 +66,7 @@ ENTRY(omap1510_idle_loop_suspend)
 	@ get ARM_IDLECT2 into r2
 	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
+	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -76,7 +76,7 @@ ENTRY(omap1510_idle_loop_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1510:	subs	r5, r5, #1
 	bne	l_1510
 /*
@@ -96,7 +96,7 @@ l_1510:	subs	r5, r5, #1
 	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
 
 ENTRY(omap1510_idle_loop_suspend_sz)
 	.word	. - omap1510_idle_loop_suspend
@@ -115,8 +115,8 @@ ENTRY(omap1610_idle_loop_suspend)
 	@ turn off clock domains
 	@ get ARM_IDLECT2 into r2
 	ldrh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-	mov	r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00
+	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -126,7 +126,7 @@ ENTRY(omap1610_idle_loop_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1610:	subs	r5, r5, #1
 	bne	l_1610
 /*
@@ -146,7 +146,7 @@ l_1610:	subs	r5, r5, #1
 	strh	r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	ldmfd   sp!, {r0 - r12, pc}     @ restore regs and return
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
 
 ENTRY(omap1610_idle_loop_suspend_sz)
 	.word	. - omap1610_idle_loop_suspend
@@ -208,7 +208,7 @@ ENTRY(omap1510_cpu_suspend)
 
 	@ turn off clock domains
 	mov	r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
+	orr	r5, r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
@@ -217,7 +217,7 @@ ENTRY(omap1510_cpu_suspend)
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
+	orr	r5, r5, #IDLE_WAIT_CYCLES & 0xff00
 l_1510_2:
 	subs	r5, r5, #1
 	bne	l_1510_2
@@ -237,7 +237,7 @@ l_1510_2:
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	@ restore regs and return
-	ldmfd   sp!, {r0 - r12, pc}
+	ldmfd	sp!, {r0 - r12, pc}
 
 ENTRY(omap1510_cpu_suspend_sz)
 	.word	. - omap1510_cpu_suspend
@@ -249,21 +249,26 @@ ENTRY(omap1610_cpu_suspend)
 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}
 
+	@ Drain write cache
+	mov	r4, #0
+	mcr	p15, 0, r0, c7, c10, 4
+	nop
+
 	@ load base address of Traffic Controller
-	mov	r4, #TCMIF_ASM_BASE & 0xff000000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x00ff0000
-	orr	r4, r4, #TCMIF_ASM_BASE & 0x0000ff00
+	mov	r6, #TCMIF_ASM_BASE & 0xff000000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x00ff0000
+	orr	r6, r6, #TCMIF_ASM_BASE & 0x0000ff00
 
 	@ prepare to put SDRAM into self-refresh manually
-	ldr	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #SELF_REFRESH_MODE & 0xff000000
-	orr	r5, r5, #SELF_REFRESH_MODE & 0x000000ff
-	str	r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	ldr	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r7, #SELF_REFRESH_MODE & 0xff000000
+	orr	r9, r9, #SELF_REFRESH_MODE & 0x000000ff
+	str	r9, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
 
 	@ prepare to put EMIFS to Sleep
-	ldr	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
-	orr	r5, r5, #IDLE_EMIFS_REQUEST & 0xff
-	str	r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	ldr	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+	orr	r9, r8, #IDLE_EMIFS_REQUEST & 0xff
+	str	r9, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
 
 	@ load base address of ARM_IDLECT1 and ARM_IDLECT2
 	mov	r4, #CLKGEN_REG_ASM_BASE & 0xff000000
@@ -271,26 +276,22 @@ ENTRY(omap1610_cpu_suspend)
 	orr	r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00
 
 	@ turn off clock domains
-	mov	r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff
- 	orr	r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00
-	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
-
-	@ work around errata of OMAP1610/5912. Enable (!) peripheral
-	@ clock to let the chip go into deep sleep
-	ldrh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
- 	orr	r5,r5, #EN_PERCK_BIT & 0xff
+	@ do not disable PERCK (0x04)
+	mov	r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP1610_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
-	mov	r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff
-	orr	r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00
+	mov	r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP1610_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
-	mov	r5, #IDLE_WAIT_CYCLES & 0xff
-	orr     r5, r5, #IDLE_WAIT_CYCLES & 0xff00
-l_1610_2:
-	subs	r5, r5, #1
-	bne	l_1610_2
+	@ disable instruction cache
+	mrc	p15, 0, r9, c1, c0, 0
+	bic	r2, r9, #0x1000
+	mcr	p15, 0, r2, c1, c0, 0
+	nop
+
 /*
  * Let's wait for the next wake up event to wake us up. r0 can't be
  * used here because r0 holds ARM_IDLECT1
@@ -301,13 +302,21 @@ l_1610_2:
  * omap1610_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
- * stack, reset the ARM_IDLECT1 and ARM_IDLECT2.
+ * stack.
  */
+	@ re-enable Icache
+	mcr	p15, 0, r9, c1, c0, 0
+
+	@ reset the ARM_IDLECT1 and ARM_IDLECT2.
 	strh	r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 	strh	r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
+	@ Restore EMIFF controls
+	str	r7, [r6, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff]
+	str	r8, [r6, #EMIFS_CONFIG_ASM_OFFSET & 0xff]
+
 	@ restore regs and return
-	ldmfd   sp!, {r0 - r12, pc}
+	ldmfd	sp!, {r0 - r12, pc}
 
 ENTRY(omap1610_cpu_suspend_sz)
 	.word	. - omap1610_cpu_suspend

arch/arm/plat-omap/sram-fn.S

@@ -0,0 +1,58 @@
+/*
+ * linux/arch/arm/plat-omap/sram.S
+ *
+ * Functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/arch/io.h>
+#include <asm/arch/hardware.h>
+
+	.text
+
+/*
+ * Reprograms ULPD and CKCTL.
+ */
+ENTRY(sram_reprogram_clock)
+	stmfd	sp!, {r0 - r12, lr}		@ save registers on stack
+
+	mov	r2, #IO_ADDRESS(DPLL_CTL) & 0xff000000
+	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x00ff0000
+	orr	r2, r2, #IO_ADDRESS(DPLL_CTL) & 0x0000ff00
+
+	mov	r3, #IO_ADDRESS(ARM_CKCTL) & 0xff000000
+	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x00ff0000
+	orr	r3, r3, #IO_ADDRESS(ARM_CKCTL) & 0x0000ff00
+
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	newck				@ nope
+	bic	r0, r0, #1 << 4			@ else clear lock bit
+	strh	r0, [r2]			@ set dpll into bypass mode
+	orr	r0, r0, #1 << 4			@ set lock bit again
+
+newck:
+	strh	r1, [r3]			@ write new ckctl value
+	strh	r0, [r2]			@ write new dpll value
+
+	mov	r4, #0x0700			@ let the clocks settle
+	orr	r4, r4, #0x00ff
+delay:	sub	r4, r4, #1
+	cmp	r4, #0
+	bne	delay
+
+lock:	ldrh	r4, [r2], #0			@ read back dpll value
+	tst	r0, #1 << 4			@ want lock mode?
+	beq	out				@ nope
+	tst	r4, #1 << 0			@ dpll rate locked?
+	beq	lock				@ try again
+
+out:
+	ldmfd	sp!, {r0 - r12, pc}		@ restore regs and return
+ENTRY(sram_reprogram_clock_sz)
+	.word	. - sram_reprogram_clock

arch/arm/plat-omap/sram.c

@@ -0,0 +1,116 @@
+/*
+ * linux/arch/arm/plat-omap/sram.c
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach/map.h>
+#include <asm/io.h>
+#include <asm/cacheflush.h>
+
+#include "sram.h"
+
+#define OMAP1_SRAM_BASE		0xd0000000
+#define OMAP1_SRAM_START	0x20000000
+#define SRAM_BOOTLOADER_SZ	0x80
+
+static unsigned long omap_sram_base;
+static unsigned long omap_sram_size;
+static unsigned long omap_sram_ceil;
+
+/*
+ * The amount of SRAM depends on the core type:
+ * 730 = 200K, 1510 = 512K, 5912 = 256K, 1610 = 16K, 1710 = 16K
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+void __init omap_detect_sram(void)
+{
+	omap_sram_base = OMAP1_SRAM_BASE;
+
+	if (cpu_is_omap730())
+		omap_sram_size = 0x32000;
+	else if (cpu_is_omap1510())
+		omap_sram_size = 0x80000;
+	else if (cpu_is_omap1610() || cpu_is_omap1621() || cpu_is_omap1710())
+		omap_sram_size = 0x4000;
+	else if (cpu_is_omap1611())
+		omap_sram_size = 0x3e800;
+	else {
+		printk(KERN_ERR "Could not detect SRAM size\n");
+		omap_sram_size = 0x4000;
+	}
+
+	printk(KERN_INFO "SRAM size: 0x%lx\n", omap_sram_size);
+	omap_sram_ceil = omap_sram_base + omap_sram_size;
+}
+
+static struct map_desc omap_sram_io_desc[] __initdata = {
+	{ OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+};
+
+/*
+ * In order to use last 2kB of SRAM on 1611b, we must round the size
+ * up to multiple of PAGE_SIZE. We cannot use ioremap for SRAM, as
+ * clock init needs SRAM early.
+ */
+void __init omap_map_sram(void)
+{
+	if (omap_sram_size == 0)
+		return;
+
+	omap_sram_io_desc[0].length = (omap_sram_size + PAGE_SIZE-1)/PAGE_SIZE;
+	omap_sram_io_desc[0].length *= PAGE_SIZE;
+	iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
+
+	/*
+	 * Looks like we need to preserve some bootloader code at the
+	 * beginning of SRAM for jumping to flash for reboot to work...
+	 */
+	memset((void *)omap_sram_base + SRAM_BOOTLOADER_SZ, 0,
+	       omap_sram_size - SRAM_BOOTLOADER_SZ);
+}
+
+static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl) = NULL;
+
+void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
+{
+	if (_omap_sram_reprogram_clock == NULL)
+		panic("Cannot use SRAM");
+
+	return _omap_sram_reprogram_clock(dpllctl, ckctl);
+}
+
+void * omap_sram_push(void * start, unsigned long size)
+{
+	if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+		printk(KERN_ERR "Not enough space in SRAM\n");
+		return NULL;
+	}
+	omap_sram_ceil -= size;
+	omap_sram_ceil &= ~0x3;
+	memcpy((void *)omap_sram_ceil, start, size);
+
+	return (void *)omap_sram_ceil;
+}
+
+void __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap_map_sram();
+	_omap_sram_reprogram_clock = omap_sram_push(sram_reprogram_clock,
+						    sram_reprogram_clock_sz);
+}

arch/arm/plat-omap/sram.h

@@ -0,0 +1,21 @@
+/*
+ * linux/arch/arm/plat-omap/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+/* Do not use these */
+extern void sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long sram_reprogram_clock_sz;
+
+#endif

arch/arm/plat-omap/usb.c

@@ -41,6 +41,7 @@
 
 /* These routines should handle the standard chip-specific modes
  * for usb0/1/2 ports, covering basic mux and transceiver setup.
+ * Call omap_usb_init() once, from INIT_MACHINE().
  *
  * Some board-*.c files will need to set up additional mux options,
  * like for suspend handling, vbus sensing, GPIOs, and the D+ pullup.

arch/arm26/Kconfig

@@ -55,6 +55,10 @@ config GENERIC_BUST_SPINLOCK
 config GENERIC_ISA_DMA
 	bool
 
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	default y
+
 source "init/Kconfig"
 
 

arch/arm26/Makefile

@@ -17,10 +17,6 @@ ifeq ($(CONFIG_FRAME_POINTER),y)
 CFLAGS		+=-fno-omit-frame-pointer -mno-sched-prolog
 endif
 
-ifeq ($(CONFIG_DEBUG_INFO),y)
-CFLAGS		+=-g
-endif
-
 CFLAGS_BOOT	:=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm
 CFLAGS		+=-mapcs-26 -mcpu=arm3 -msoft-float -Uarm
 AFLAGS		+=-mapcs-26 -mcpu=arm3 -msoft-float

arch/arm26/kernel/time.c

@@ -114,7 +114,7 @@ static unsigned long next_rtc_update;
  */
 static inline void do_set_rtc(void)
 {
-	if (time_status & STA_UNSYNC || set_rtc == NULL)
+	if (!ntp_synced() || set_rtc == NULL)
 		return;
 
 //FIXME - timespec.tv_sec is a time_t not unsigned long
@@ -189,10 +189,7 @@ int do_settimeofday(struct timespec *tv)
 
 	xtime.tv_sec = tv->tv_sec;
 	xtime.tv_nsec = tv->tv_nsec;
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;

arch/cris/arch-v10/kernel/time.c

@@ -240,7 +240,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 	 * The division here is not time critical since it will run once in 
 	 * 11 minutes
 	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
+	if (ntp_synced() &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - (tick_nsec / 1000) / 2 &&
 	    (xtime.tv_nsec / 1000) <= 500000 + (tick_nsec / 1000) / 2) {

arch/cris/kernel/time.c

@@ -114,10 +114,7 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;

arch/frv/kernel/time.c

@@ -85,7 +85,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs)
 	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
 	 * called as close as possible to 500 ms before the new second starts.
 	 */
-	if ((time_status & STA_UNSYNC) == 0 &&
+	if (ntp_synced() &&
 	    xtime.tv_sec > last_rtc_update + 660 &&
 	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
 	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2
@@ -216,10 +216,7 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;

arch/h8300/kernel/time.c

@@ -116,10 +116,7 @@ int do_settimeofday(struct timespec *tv)
 
 	xtime.tv_sec = tv->tv_sec;
 	xtime.tv_nsec = tv->tv_nsec;
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;

arch/i386/Kconfig

@@ -37,6 +37,10 @@ config GENERIC_IOMAP
 	bool
 	default y
 
+config ARCH_MAY_HAVE_PC_FDC
+	bool
+	default y
+
 source "init/Kconfig"
 
 menu "Processor type and features"
@@ -1208,7 +1212,6 @@ config PCI_DIRECT
 config PCI_MMCONFIG
 	bool
 	depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
-	select ACPI_BOOT
 	default y
 
 source "drivers/pci/pcie/Kconfig"
@@ -1318,6 +1321,11 @@ config GENERIC_IRQ_PROBE
 	bool
 	default y
 
+config GENERIC_PENDING_IRQ
+	bool
+	depends on GENERIC_HARDIRQS && SMP
+	default y
+
 config X86_SMP
 	bool
 	depends on SMP && !X86_VOYAGER

arch/i386/boot/setup.S

@@ -82,7 +82,7 @@ start:
 # This is the setup header, and it must start at %cs:2 (old 0x9020:2)
 
 		.ascii	"HdrS"		# header signature
-		.word	0x0203		# header version number (>= 0x0105)
+		.word	0x0204		# header version number (>= 0x0105)
 					# or else old loadlin-1.5 will fail)
 realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
 start_sys_seg:	.word	SYSSEG

arch/i386/boot/tools/build.c

@@ -177,7 +177,9 @@ int main(int argc, char ** argv)
 		die("Output: seek failed");
 	buf[0] = (sys_size & 0xff);
 	buf[1] = ((sys_size >> 8) & 0xff);
-	if (write(1, buf, 2) != 2)
+	buf[2] = ((sys_size >> 16) & 0xff);
+	buf[3] = ((sys_size >> 24) & 0xff);
+	if (write(1, buf, 4) != 4)
 		die("Write of image length failed");
 
 	return 0;					    /* Everything is OK */

arch/i386/defconfig

@@ -131,8 +131,6 @@ CONFIG_SOFTWARE_SUSPEND=y
 # ACPI (Advanced Configuration and Power Interface) Support
 #
 CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_SLEEP=y
 CONFIG_ACPI_SLEEP_PROC_FS=y
 CONFIG_ACPI_AC=y
@@ -144,10 +142,8 @@ CONFIG_ACPI_THERMAL=y
 # CONFIG_ACPI_ASUS is not set
 # CONFIG_ACPI_TOSHIBA is not set
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
 CONFIG_ACPI_EC=y
 CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_X86_PM_TIMER is not set
 

arch/i386/kernel/Makefile

@@ -11,7 +11,7 @@ obj-y	:= process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
 
 obj-y				+= cpu/
 obj-y				+= timers/
-obj-$(CONFIG_ACPI_BOOT)		+= acpi/
+obj-$(CONFIG_ACPI)		+= acpi/
 obj-$(CONFIG_X86_BIOS_REBOOT)	+= reboot.o
 obj-$(CONFIG_MCA)		+= mca.o
 obj-$(CONFIG_X86_MSR)		+= msr.o

arch/i386/kernel/acpi/Makefile

@@ -1,4 +1,4 @@
-obj-$(CONFIG_ACPI_BOOT)		:= boot.o
+obj-y				:= boot.o
 obj-$(CONFIG_X86_IO_APIC)	+= earlyquirk.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup.o
 

arch/i386/kernel/acpi/boot.c

@@ -40,19 +40,25 @@
 
 #ifdef	CONFIG_X86_64
 
-static inline void  acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+}
 extern void __init clustered_apic_check(void);
-static inline int ioapic_setup_disabled(void) { return 0; }
+static inline int ioapic_setup_disabled(void)
+{
+	return 0;
+}
+
 #include <asm/proto.h>
 
-#else	/* X86 */
+#else				/* X86 */
 
 #ifdef	CONFIG_X86_LOCAL_APIC
 #include <mach_apic.h>
 #include <mach_mpparse.h>
-#endif	/* CONFIG_X86_LOCAL_APIC */
+#endif				/* CONFIG_X86_LOCAL_APIC */
 
-#endif	/* X86 */
+#endif				/* X86 */
 
 #define BAD_MADT_ENTRY(entry, end) (					    \
 		(!entry) || (unsigned long)entry + sizeof(*entry) > end ||  \
@@ -60,13 +66,8 @@ static inline int ioapic_setup_disabled(void) { return 0; }
 
 #define PREFIX			"ACPI: "
 
-#ifdef CONFIG_ACPI_PCI
 int acpi_noirq __initdata;	/* skip ACPI IRQ initialization */
-int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
-#else
-int acpi_noirq __initdata = 1;
-int acpi_pci_disabled __initdata = 1;
-#endif
+int acpi_pci_disabled __initdata;	/* skip ACPI PCI scan and IRQ initialization */
 int acpi_ht __initdata = 1;	/* enable HT */
 
 int acpi_lapic;
@@ -88,7 +89,7 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
 
 #define MAX_MADT_ENTRIES	256
 u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
-			{ [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+    {[0 ... MAX_MADT_ENTRIES - 1] = 0xff };
 EXPORT_SYMBOL(x86_acpiid_to_apicid);
 
 /* --------------------------------------------------------------------------
@@ -99,7 +100,7 @@ EXPORT_SYMBOL(x86_acpiid_to_apicid);
  * The default interrupt routing model is PIC (8259).  This gets
  * overriden if IOAPICs are enumerated (below).
  */
-enum acpi_irq_model_id		acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 
 #ifdef	CONFIG_X86_64
 
@@ -107,7 +108,7 @@ enum acpi_irq_model_id		acpi_irq_model = ACPI_IRQ_MODEL_PIC;
 char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
 {
 	if (!phys_addr || !size)
-	return NULL;
+		return NULL;
 
 	if (phys_addr < (end_pfn_map << PAGE_SHIFT))
 		return __va(phys_addr);
@@ -134,8 +135,8 @@ char *__acpi_map_table(unsigned long phys, unsigned long size)
 	unsigned long base, offset, mapped_size;
 	int idx;
 
-	if (phys + size < 8*1024*1024) 
-		return __va(phys); 
+	if (phys + size < 8 * 1024 * 1024)
+		return __va(phys);
 
 	offset = phys & (PAGE_SIZE - 1);
 	mapped_size = PAGE_SIZE - offset;
@@ -154,7 +155,7 @@ char *__acpi_map_table(unsigned long phys, unsigned long size)
 		mapped_size += PAGE_SIZE;
 	}
 
-	return ((unsigned char *) base + offset);
+	return ((unsigned char *)base + offset);
 }
 #endif
 
@@ -172,7 +173,7 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 	if (!phys_addr || !size)
 		return -EINVAL;
 
-	mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+	mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
 	if (!mcfg) {
 		printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
 		return -ENODEV;
@@ -209,20 +210,17 @@ int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
 
 	return 0;
 }
-#endif /* CONFIG_PCI_MMCONFIG */
+#endif				/* CONFIG_PCI_MMCONFIG */
 
 #ifdef CONFIG_X86_LOCAL_APIC
-static int __init
-acpi_parse_madt (
-	unsigned long		phys_addr,
-	unsigned long		size)
+static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
 {
-	struct acpi_table_madt	*madt = NULL;
+	struct acpi_table_madt *madt = NULL;
 
 	if (!phys_addr || !size)
 		return -EINVAL;
 
-	madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+	madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
 	if (!madt) {
 		printk(KERN_WARNING PREFIX "Unable to map MADT\n");
 		return -ENODEV;
@@ -232,22 +230,20 @@ acpi_parse_madt (
 		acpi_lapic_addr = (u64) madt->lapic_address;
 
 		printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
-			madt->lapic_address);
+		       madt->lapic_address);
 	}
 
 	acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
-	
+
 	return 0;
 }
 
-
 static int __init
-acpi_parse_lapic (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
 {
-	struct acpi_table_lapic	*processor = NULL;
+	struct acpi_table_lapic *processor = NULL;
 
-	processor = (struct acpi_table_lapic*) header;
+	processor = (struct acpi_table_lapic *)header;
 
 	if (BAD_MADT_ENTRY(processor, end))
 		return -EINVAL;
@@ -260,20 +256,19 @@ acpi_parse_lapic (
 
 	x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
 
-	mp_register_lapic (
-		processor->id,					   /* APIC ID */
-		processor->flags.enabled);			  /* Enabled? */
+	mp_register_lapic(processor->id,	/* APIC ID */
+			  processor->flags.enabled);	/* Enabled? */
 
 	return 0;
 }
 
 static int __init
-acpi_parse_lapic_addr_ovr (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
+			  const unsigned long end)
 {
 	struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
 
-	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header;
 
 	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
 		return -EINVAL;
@@ -284,12 +279,11 @@ acpi_parse_lapic_addr_ovr (
 }
 
 static int __init
-acpi_parse_lapic_nmi (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
 {
 	struct acpi_table_lapic_nmi *lapic_nmi = NULL;
 
-	lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+	lapic_nmi = (struct acpi_table_lapic_nmi *)header;
 
 	if (BAD_MADT_ENTRY(lapic_nmi, end))
 		return -EINVAL;
@@ -302,37 +296,32 @@ acpi_parse_lapic_nmi (
 	return 0;
 }
 
+#endif				/*CONFIG_X86_LOCAL_APIC */
 
-#endif /*CONFIG_X86_LOCAL_APIC*/
-
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+#ifdef CONFIG_X86_IO_APIC
 
 static int __init
-acpi_parse_ioapic (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end)
 {
 	struct acpi_table_ioapic *ioapic = NULL;
 
-	ioapic = (struct acpi_table_ioapic*) header;
+	ioapic = (struct acpi_table_ioapic *)header;
 
 	if (BAD_MADT_ENTRY(ioapic, end))
 		return -EINVAL;
- 
+
 	acpi_table_print_madt_entry(header);
 
-	mp_register_ioapic (
-		ioapic->id,
-		ioapic->address,
-		ioapic->global_irq_base);
- 
+	mp_register_ioapic(ioapic->id,
+			   ioapic->address, ioapic->global_irq_base);
+
 	return 0;
 }
 
 /*
  * Parse Interrupt Source Override for the ACPI SCI
  */
-static void
-acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
 {
 	if (trigger == 0)	/* compatible SCI trigger is level */
 		trigger = 3;
@@ -348,7 +337,7 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
 		polarity = acpi_sci_flags.polarity;
 
 	/*
- 	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+	 * mp_config_acpi_legacy_irqs() already setup IRQs < 16
 	 * If GSI is < 16, this will update its flags,
 	 * else it will create a new mp_irqs[] entry.
 	 */
@@ -363,12 +352,12 @@ acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
 }
 
 static int __init
-acpi_parse_int_src_ovr (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_int_src_ovr(acpi_table_entry_header * header,
+		       const unsigned long end)
 {
 	struct acpi_table_int_src_ovr *intsrc = NULL;
 
-	intsrc = (struct acpi_table_int_src_ovr*) header;
+	intsrc = (struct acpi_table_int_src_ovr *)header;
 
 	if (BAD_MADT_ENTRY(intsrc, end))
 		return -EINVAL;
@@ -377,33 +366,30 @@ acpi_parse_int_src_ovr (
 
 	if (intsrc->bus_irq == acpi_fadt.sci_int) {
 		acpi_sci_ioapic_setup(intsrc->global_irq,
-			intsrc->flags.polarity, intsrc->flags.trigger);
+				      intsrc->flags.polarity,
+				      intsrc->flags.trigger);
 		return 0;
 	}
 
 	if (acpi_skip_timer_override &&
-		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
-			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
-			return 0;
+	    intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+		printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+		return 0;
 	}
 
-	mp_override_legacy_irq (
-		intsrc->bus_irq,
-		intsrc->flags.polarity,
-		intsrc->flags.trigger,
-		intsrc->global_irq);
+	mp_override_legacy_irq(intsrc->bus_irq,
+			       intsrc->flags.polarity,
+			       intsrc->flags.trigger, intsrc->global_irq);
 
 	return 0;
 }
 
-
 static int __init
-acpi_parse_nmi_src (
-	acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
 {
 	struct acpi_table_nmi_src *nmi_src = NULL;
 
-	nmi_src = (struct acpi_table_nmi_src*) header;
+	nmi_src = (struct acpi_table_nmi_src *)header;
 
 	if (BAD_MADT_ENTRY(nmi_src, end))
 		return -EINVAL;
@@ -415,9 +401,7 @@ acpi_parse_nmi_src (
 	return 0;
 }
 
-#endif /* CONFIG_X86_IO_APIC */
-
-#ifdef	CONFIG_ACPI_BUS
+#endif				/* CONFIG_X86_IO_APIC */
 
 /*
  * acpi_pic_sci_set_trigger()
@@ -433,8 +417,7 @@ acpi_parse_nmi_src (
  * ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
  */
 
-void __init
-acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 {
 	unsigned int mask = 1 << irq;
 	unsigned int old, new;
@@ -454,10 +437,10 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 	 * routing tables..
 	 */
 	switch (trigger) {
-	case 1:	/* Edge - clear */
+	case 1:		/* Edge - clear */
 		new &= ~mask;
 		break;
-	case 3: /* Level - set */
+	case 3:		/* Level - set */
 		new |= mask;
 		break;
 	}
@@ -470,21 +453,22 @@ acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
 	outb(new >> 8, 0x4d1);
 }
 
-
-#endif /* CONFIG_ACPI_BUS */
-
 int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
 {
 #ifdef CONFIG_X86_IO_APIC
 	if (use_pci_vector() && !platform_legacy_irq(gsi))
- 		*irq = IO_APIC_VECTOR(gsi);
+		*irq = IO_APIC_VECTOR(gsi);
 	else
 #endif
 		*irq = gsi;
 	return 0;
 }
 
-unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+/*
+ * success: return IRQ number (>=0)
+ * failure: return < 0
+ */
+int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 {
 	unsigned int irq;
 	unsigned int plat_gsi = gsi;
@@ -497,7 +481,7 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 		extern void eisa_set_level_irq(unsigned int irq);
 
 		if (edge_level == ACPI_LEVEL_SENSITIVE)
-				eisa_set_level_irq(gsi);
+			eisa_set_level_irq(gsi);
 	}
 #endif
 
@@ -509,60 +493,58 @@ unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
 	acpi_gsi_to_irq(plat_gsi, &irq);
 	return irq;
 }
+
 EXPORT_SYMBOL(acpi_register_gsi);
 
 /*
  *  ACPI based hotplug support for CPU
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
-int
-acpi_map_lsapic(acpi_handle handle, int *pcpu)
+int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 {
 	/* TBD */
 	return -EINVAL;
 }
-EXPORT_SYMBOL(acpi_map_lsapic);
 
+EXPORT_SYMBOL(acpi_map_lsapic);
 
-int
-acpi_unmap_lsapic(int cpu)
+int acpi_unmap_lsapic(int cpu)
 {
 	/* TBD */
 	return -EINVAL;
 }
+
 EXPORT_SYMBOL(acpi_unmap_lsapic);
-#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+#endif				/* CONFIG_ACPI_HOTPLUG_CPU */
 
-int
-acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
 {
 	/* TBD */
 	return -EINVAL;
 }
+
 EXPORT_SYMBOL(acpi_register_ioapic);
 
-int
-acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
 {
 	/* TBD */
 	return -EINVAL;
 }
+
 EXPORT_SYMBOL(acpi_unregister_ioapic);
 
 static unsigned long __init
-acpi_scan_rsdp (
-	unsigned long		start,
-	unsigned long		length)
+acpi_scan_rsdp(unsigned long start, unsigned long length)
 {
-	unsigned long		offset = 0;
-	unsigned long		sig_len = sizeof("RSD PTR ") - 1;
+	unsigned long offset = 0;
+	unsigned long sig_len = sizeof("RSD PTR ") - 1;
 
 	/*
 	 * Scan all 16-byte boundaries of the physical memory region for the
 	 * RSDP signature.
 	 */
 	for (offset = 0; offset < length; offset += 16) {
-		if (strncmp((char *) (start + offset), "RSD PTR ", sig_len))
+		if (strncmp((char *)(start + offset), "RSD PTR ", sig_len))
 			continue;
 		return (start + offset);
 	}
@@ -575,20 +557,19 @@ static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
 	struct acpi_table_sbf *sb;
 
 	if (!phys_addr || !size)
-	return -EINVAL;
+		return -EINVAL;
 
-	sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+	sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size);
 	if (!sb) {
 		printk(KERN_WARNING PREFIX "Unable to map SBF\n");
 		return -ENODEV;
 	}
 
-	sbf_port = sb->sbf_cmos; /* Save CMOS port */
+	sbf_port = sb->sbf_cmos;	/* Save CMOS port */
 
 	return 0;
 }
 
-
 #ifdef CONFIG_HPET_TIMER
 
 static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
@@ -598,7 +579,7 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
 	if (!phys || !size)
 		return -EINVAL;
 
-	hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+	hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size);
 	if (!hpet_tbl) {
 		printk(KERN_WARNING PREFIX "Unable to map HPET\n");
 		return -ENODEV;
@@ -609,22 +590,21 @@ static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
 		       "memory.\n");
 		return -1;
 	}
-
 #ifdef	CONFIG_X86_64
-        vxtime.hpet_address = hpet_tbl->addr.addrl |
-                ((long) hpet_tbl->addr.addrh << 32);
+	vxtime.hpet_address = hpet_tbl->addr.addrl |
+	    ((long)hpet_tbl->addr.addrh << 32);
 
-        printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
-               hpet_tbl->id, vxtime.hpet_address);
-#else	/* X86 */
+	printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+	       hpet_tbl->id, vxtime.hpet_address);
+#else				/* X86 */
 	{
 		extern unsigned long hpet_address;
 
 		hpet_address = hpet_tbl->addr.addrl;
 		printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
-			hpet_tbl->id, hpet_address);
+		       hpet_tbl->id, hpet_address);
 	}
-#endif	/* X86 */
+#endif				/* X86 */
 
 	return 0;
 }
@@ -640,28 +620,25 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
 {
 	struct fadt_descriptor_rev2 *fadt = NULL;
 
-	fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
-	if(!fadt) {
+	fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size);
+	if (!fadt) {
 		printk(KERN_WARNING PREFIX "Unable to map FADT\n");
 		return 0;
 	}
-
-#ifdef	CONFIG_ACPI_INTERPRETER
 	/* initialize sci_int early for INT_SRC_OVR MADT parsing */
 	acpi_fadt.sci_int = fadt->sci_int;
-#endif
 
-#ifdef CONFIG_ACPI_BUS
 	/* initialize rev and apic_phys_dest_mode for x86_64 genapic */
 	acpi_fadt.revision = fadt->revision;
-	acpi_fadt.force_apic_physical_destination_mode = fadt->force_apic_physical_destination_mode;
-#endif
+	acpi_fadt.force_apic_physical_destination_mode =
+	    fadt->force_apic_physical_destination_mode;
 
 #ifdef CONFIG_X86_PM_TIMER
 	/* detect the location of the ACPI PM Timer */
 	if (fadt->revision >= FADT2_REVISION_ID) {
 		/* FADT rev. 2 */
-		if (fadt->xpm_tmr_blk.address_space_id != ACPI_ADR_SPACE_SYSTEM_IO)
+		if (fadt->xpm_tmr_blk.address_space_id !=
+		    ACPI_ADR_SPACE_SYSTEM_IO)
 			return 0;
 
 		pmtmr_ioport = fadt->xpm_tmr_blk.address;
@@ -670,16 +647,15 @@ static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
 		pmtmr_ioport = fadt->V1_pm_tmr_blk;
 	}
 	if (pmtmr_ioport)
-		printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n", pmtmr_ioport);
+		printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
+		       pmtmr_ioport);
 #endif
 	return 0;
 }
 
-
-unsigned long __init
-acpi_find_rsdp (void)
+unsigned long __init acpi_find_rsdp(void)
 {
-	unsigned long		rsdp_phys = 0;
+	unsigned long rsdp_phys = 0;
 
 	if (efi_enabled) {
 		if (efi.acpi20)
@@ -691,9 +667,9 @@ acpi_find_rsdp (void)
 	 * Scan memory looking for the RSDP signature. First search EBDA (low
 	 * memory) paragraphs and then search upper memory (E0000-FFFFF).
 	 */
-	rsdp_phys = acpi_scan_rsdp (0, 0x400);
+	rsdp_phys = acpi_scan_rsdp(0, 0x400);
 	if (!rsdp_phys)
-		rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000);
+		rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000);
 
 	return rsdp_phys;
 }
@@ -703,8 +679,7 @@ acpi_find_rsdp (void)
  * Parse LAPIC entries in MADT
  * returns 0 on success, < 0 on error
  */
-static int __init
-acpi_parse_madt_lapic_entries(void)
+static int __init acpi_parse_madt_lapic_entries(void)
 {
 	int count;
 
@@ -713,28 +688,31 @@ acpi_parse_madt_lapic_entries(void)
 	 * and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
 	 */
 
-	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0);
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR,
+				  acpi_parse_lapic_addr_ovr, 0);
 	if (count < 0) {
-		printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
+		printk(KERN_ERR PREFIX
+		       "Error parsing LAPIC address override entry\n");
 		return count;
 	}
 
 	mp_register_lapic_address(acpi_lapic_addr);
 
 	count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
-				       MAX_APICS);
-	if (!count) { 
+				      MAX_APICS);
+	if (!count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");
 		/* TBD: Cleanup to allow fallback to MPS */
 		return -ENODEV;
-	}
-	else if (count < 0) {
+	} else if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
 		return count;
 	}
 
-	count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
@@ -742,15 +720,14 @@ acpi_parse_madt_lapic_entries(void)
 	}
 	return 0;
 }
-#endif /* CONFIG_X86_LOCAL_APIC */
+#endif				/* CONFIG_X86_LOCAL_APIC */
 
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+#ifdef	CONFIG_X86_IO_APIC
 /*
  * Parse IOAPIC related entries in MADT
  * returns 0 on success, < 0 on error
  */
-static int __init
-acpi_parse_madt_ioapic_entries(void)
+static int __init acpi_parse_madt_ioapic_entries(void)
 {
 	int count;
 
@@ -762,30 +739,34 @@ acpi_parse_madt_ioapic_entries(void)
 	 */
 	if (acpi_disabled || acpi_noirq) {
 		return -ENODEV;
-        }
+	}
 
 	/*
- 	 * if "noapic" boot option, don't look for IO-APICs
+	 * if "noapic" boot option, don't look for IO-APICs
 	 */
 	if (skip_ioapic_setup) {
 		printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
-			"due to 'noapic' option.\n");
+		       "due to 'noapic' option.\n");
 		return -ENODEV;
 	}
 
-	count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic,
+				  MAX_IO_APICS);
 	if (!count) {
 		printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
 		return -ENODEV;
-	}
-	else if (count < 0) {
+	} else if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
 		return count;
 	}
 
-	count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr,
+				  NR_IRQ_VECTORS);
 	if (count < 0) {
-		printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
+		printk(KERN_ERR PREFIX
+		       "Error parsing interrupt source overrides entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
 		return count;
 	}
@@ -800,7 +781,9 @@ acpi_parse_madt_ioapic_entries(void)
 	/* Fill in identity legacy mapings where no override */
 	mp_config_acpi_legacy_irqs();
 
-	count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
+	count =
+	    acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src,
+				  NR_IRQ_VECTORS);
 	if (count < 0) {
 		printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
 		/* TBD: Cleanup to allow fallback to MPS */
@@ -814,11 +797,9 @@ static inline int acpi_parse_madt_ioapic_entries(void)
 {
 	return -1;
 }
-#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
+#endif	/* !CONFIG_X86_IO_APIC */
 
-
-static void __init
-acpi_process_madt(void)
+static void __init acpi_process_madt(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
 	int count, error;
@@ -853,7 +834,8 @@ acpi_process_madt(void)
 			/*
 			 * Dell Precision Workstation 410, 610 come here.
 			 */
-			printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling ACPI\n");
+			printk(KERN_ERR PREFIX
+			       "Invalid BIOS MADT, disabling ACPI\n");
 			disable_acpi();
 		}
 	}
@@ -865,7 +847,6 @@ extern int acpi_force;
 
 #ifdef __i386__
 
-#ifdef	CONFIG_ACPI_PCI
 static int __init disable_acpi_irq(struct dmi_system_id *d)
 {
 	if (!acpi_force) {
@@ -885,12 +866,11 @@ static int __init disable_acpi_pci(struct dmi_system_id *d)
 	}
 	return 0;
 }
-#endif
 
 static int __init dmi_disable_acpi(struct dmi_system_id *d)
 {
 	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: acpi off\n",d->ident);
+		printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
 		disable_acpi();
 	} else {
 		printk(KERN_NOTICE
@@ -905,7 +885,8 @@ static int __init dmi_disable_acpi(struct dmi_system_id *d)
 static int __init force_acpi_ht(struct dmi_system_id *d)
 {
 	if (!acpi_force) {
-		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n", d->ident);
+		printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
+		       d->ident);
 		disable_acpi();
 		acpi_ht = 1;
 	} else {
@@ -924,155 +905,155 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 	 * Boxes that need ACPI disabled
 	 */
 	{
-		.callback = dmi_disable_acpi,
-		.ident = "IBM Thinkpad",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
-		},
-	},
+	 .callback = dmi_disable_acpi,
+	 .ident = "IBM Thinkpad",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
+		     },
+	 },
 
 	/*
 	 * Boxes that need acpi=ht
 	 */
 	{
-		.callback = force_acpi_ht,
-		.ident = "FSC Primergy T850",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "FSC Primergy T850",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "DELL GX240",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
-			DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "DELL GX240",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
+		     DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "HP VISUALIZE NT Workstation",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "HP VISUALIZE NT Workstation",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "Compaq Workstation W8000",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "Compaq Workstation W8000",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "ASUS P4B266",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "ASUS P4B266",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		     DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "ASUS P2B-DS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "ASUS P2B-DS",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		     DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "ASUS CUR-DLS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "ASUS CUR-DLS",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		     DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "ABIT i440BX-W83977",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
-			DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "ABIT i440BX-W83977",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
+		     DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "IBM Bladecenter",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "IBM Bladecenter",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "IBM eServer xSeries 360",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "IBM eServer xSeries 360",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "IBM eserver xSeries 330",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
-		},
-	},
+	 .callback = force_acpi_ht,
+	 .ident = "IBM eserver xSeries 330",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
+		     },
+	 },
 	{
-		.callback = force_acpi_ht,
-		.ident = "IBM eserver xSeries 440",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
-		},
-	},
-
-#ifdef	CONFIG_ACPI_PCI
+	 .callback = force_acpi_ht,
+	 .ident = "IBM eserver xSeries 440",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
+		     },
+	 },
+
 	/*
 	 * Boxes that need ACPI PCI IRQ routing disabled
 	 */
 	{
-		.callback = disable_acpi_irq,
-		.ident = "ASUS A7V",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
-			DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
-			/* newer BIOS, Revision 1011, does work */
-			DMI_MATCH(DMI_BIOS_VERSION, "ASUS A7V ACPI BIOS Revision 1007"),
-		},
-	},
+	 .callback = disable_acpi_irq,
+	 .ident = "ASUS A7V",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+		     DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
+		     /* newer BIOS, Revision 1011, does work */
+		     DMI_MATCH(DMI_BIOS_VERSION,
+			       "ASUS A7V ACPI BIOS Revision 1007"),
+		     },
+	 },
 
 	/*
 	 * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
 	 */
-	{	/* _BBN 0 bug */
-		.callback = disable_acpi_pci,
-		.ident = "ASUS PR-DLS",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
-			DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
-			DMI_MATCH(DMI_BIOS_VERSION, "ASUS PR-DLS ACPI BIOS Revision 1010"),
-			DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
-		},
-	},
+	{			/* _BBN 0 bug */
+	 .callback = disable_acpi_pci,
+	 .ident = "ASUS PR-DLS",
+	 .matches = {
+		     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+		     DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
+		     DMI_MATCH(DMI_BIOS_VERSION,
+			       "ASUS PR-DLS ACPI BIOS Revision 1010"),
+		     DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
+		     },
+	 },
 	{
-		.callback = disable_acpi_pci,
-		.ident = "Acer TravelMate 36x Laptop",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
- 			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
-		},
-	},
-#endif
-	{ }
+	 .callback = disable_acpi_pci,
+	 .ident = "Acer TravelMate 36x Laptop",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+		     },
+	 },
+	{}
 };
 
-#endif	/* __i386__ */
+#endif				/* __i386__ */
 
 /*
  * acpi_boot_table_init() and acpi_boot_init()
@@ -1097,8 +1078,7 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
  *	!0: failure
  */
 
-int __init
-acpi_boot_table_init(void)
+int __init acpi_boot_table_init(void)
 {
 	int error;
 
@@ -1111,7 +1091,7 @@ acpi_boot_table_init(void)
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
 	if (acpi_disabled && !acpi_ht)
-		 return 1;
+		return 1;
 
 	/* 
 	 * Initialize the ACPI boot-time table parser.
@@ -1121,7 +1101,6 @@ acpi_boot_table_init(void)
 		disable_acpi();
 		return error;
 	}
-
 #ifdef __i386__
 	check_acpi_pci();
 #endif
@@ -1145,7 +1124,6 @@ acpi_boot_table_init(void)
 	return 0;
 }
 
-
 int __init acpi_boot_init(void)
 {
 	/*
@@ -1153,7 +1131,7 @@ int __init acpi_boot_init(void)
 	 * One exception: acpi=ht continues far enough to enumerate LAPICs
 	 */
 	if (acpi_disabled && !acpi_ht)
-		 return 1;
+		return 1;
 
 	acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
 
@@ -1171,4 +1149,3 @@ int __init acpi_boot_init(void)
 
 	return 0;
 }
-

arch/i386/kernel/acpi/earlyquirk.c

@@ -8,44 +8,44 @@
 #include <asm/pci-direct.h>
 #include <asm/acpi.h>
 
-static int __init check_bridge(int vendor, int device) 
+static int __init check_bridge(int vendor, int device)
 {
 	/* According to Nvidia all timer overrides are bogus. Just ignore
 	   them all. */
-	if (vendor == PCI_VENDOR_ID_NVIDIA) { 
-		acpi_skip_timer_override = 1; 		
+	if (vendor == PCI_VENDOR_ID_NVIDIA) {
+		acpi_skip_timer_override = 1;
 	}
 	return 0;
 }
-   
-void __init check_acpi_pci(void) 
-{ 
-	int num,slot,func; 
+
+void __init check_acpi_pci(void)
+{
+	int num, slot, func;
 
 	/* Assume the machine supports type 1. If not it will 
 	   always read ffffffff and should not have any side effect. */
 
 	/* Poor man's PCI discovery */
-	for (num = 0; num < 32; num++) { 
-		for (slot = 0; slot < 32; slot++) { 
-			for (func = 0; func < 8; func++) { 
+	for (num = 0; num < 32; num++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
 				u32 class;
 				u32 vendor;
-				class = read_pci_config(num,slot,func,
+				class = read_pci_config(num, slot, func,
 							PCI_CLASS_REVISION);
 				if (class == 0xffffffff)
-					break; 
+					break;
 
 				if ((class >> 16) != PCI_CLASS_BRIDGE_PCI)
-					continue; 
-				
-				vendor = read_pci_config(num, slot, func, 
+					continue;
+
+				vendor = read_pci_config(num, slot, func,
 							 PCI_VENDOR_ID);
-				
-				if (check_bridge(vendor&0xffff, vendor >> 16))
-					return; 
-			} 
-			
+
+				if (check_bridge(vendor & 0xffff, vendor >> 16))
+					return;
+			}
+
 		}
 	}
 }

arch/i386/kernel/acpi/sleep.c

@@ -20,12 +20,13 @@ extern void zap_low_mappings(void);
 
 extern unsigned long FASTCALL(acpi_copy_wakeup_routine(unsigned long));
 
-static void init_low_mapping(pgd_t *pgd, int pgd_limit)
+static void init_low_mapping(pgd_t * pgd, int pgd_limit)
 {
 	int pgd_ofs = 0;
 
-	while ((pgd_ofs < pgd_limit) && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
-		set_pgd(pgd, *(pgd+USER_PTRS_PER_PGD));
+	while ((pgd_ofs < pgd_limit)
+	       && (pgd_ofs + USER_PTRS_PER_PGD < PTRS_PER_PGD)) {
+		set_pgd(pgd, *(pgd + USER_PTRS_PER_PGD));
 		pgd_ofs++, pgd++;
 	}
 	flush_tlb_all();
@@ -37,12 +38,13 @@ static void init_low_mapping(pgd_t *pgd, int pgd_limit)
  * Create an identity mapped page table and copy the wakeup routine to
  * low memory.
  */
-int acpi_save_state_mem (void)
+int acpi_save_state_mem(void)
 {
 	if (!acpi_wakeup_address)
 		return 1;
 	init_low_mapping(swapper_pg_dir, USER_PTRS_PER_PGD);
-	memcpy((void *) acpi_wakeup_address, &wakeup_start, &wakeup_end - &wakeup_start);
+	memcpy((void *)acpi_wakeup_address, &wakeup_start,
+	       &wakeup_end - &wakeup_start);
 	acpi_copy_wakeup_routine(acpi_wakeup_address);
 
 	return 0;
@@ -51,7 +53,7 @@ int acpi_save_state_mem (void)
 /*
  * acpi_restore_state - undo effects of acpi_save_state_mem
  */
-void acpi_restore_state_mem (void)
+void acpi_restore_state_mem(void)
 {
 	zap_low_mappings();
 }
@@ -67,7 +69,8 @@ void acpi_restore_state_mem (void)
 void __init acpi_reserve_bootmem(void)
 {
 	if ((&wakeup_end - &wakeup_start) > PAGE_SIZE) {
-		printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n");
+		printk(KERN_ERR
+		       "ACPI: Wakeup code way too big, S3 disabled.\n");
 		return;
 	}
 
@@ -90,10 +93,8 @@ static int __init acpi_sleep_setup(char *str)
 	return 1;
 }
 
-
 __setup("acpi_sleep=", acpi_sleep_setup);
 
-
 static __init int reset_videomode_after_s3(struct dmi_system_id *d)
 {
 	acpi_video_flags |= 2;
@@ -101,14 +102,14 @@ static __init int reset_videomode_after_s3(struct dmi_system_id *d)
 }
 
 static __initdata struct dmi_system_id acpisleep_dmi_table[] = {
-	{	/* Reset video mode after returning from ACPI S3 sleep */
-		.callback = reset_videomode_after_s3,
-		.ident = "Toshiba Satellite 4030cdt",
-		.matches = {
-			DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
-		},
-	},
-	{ }
+	{			/* Reset video mode after returning from ACPI S3 sleep */
+	 .callback = reset_videomode_after_s3,
+	 .ident = "Toshiba Satellite 4030cdt",
+	 .matches = {
+		     DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"),
+		     },
+	 },
+	{}
 };
 
 static int __init acpisleep_dmi_init(void)

arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c

@@ -31,6 +31,7 @@
 #include <linux/cpufreq.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/compiler.h>
 #include <asm/io.h>
 #include <asm/delay.h>
 #include <asm/uaccess.h>
@@ -57,6 +58,8 @@ static struct cpufreq_acpi_io	*acpi_io_data[NR_CPUS];
 
 static struct cpufreq_driver acpi_cpufreq_driver;
 
+static unsigned int acpi_pstate_strict;
+
 static int
 acpi_processor_write_port(
 	u16	port,
@@ -163,34 +166,44 @@ acpi_processor_set_performance (
 	}
 
 	/*
-	 * Then we read the 'status_register' and compare the value with the
-	 * target state's 'status' to make sure the transition was successful.
-	 * Note that we'll poll for up to 1ms (100 cycles of 10us) before
-	 * giving up.
+	 * Assume the write went through when acpi_pstate_strict is not used.
+	 * As read status_register is an expensive operation and there 
+	 * are no specific error cases where an IO port write will fail.
 	 */
-
-	port = data->acpi_data.status_register.address;
-	bit_width = data->acpi_data.status_register.bit_width;
-
-	dprintk("Looking for 0x%08x from port 0x%04x\n",
-		(u32) data->acpi_data.states[state].status, port);
-
-	for (i=0; i<100; i++) {
-		ret = acpi_processor_read_port(port, bit_width, &value);
-		if (ret) {	
-			dprintk("Invalid port width 0x%04x\n", bit_width);
-			retval = ret;
-			goto migrate_end;
+	if (acpi_pstate_strict) {
+		/* Then we read the 'status_register' and compare the value 
+		 * with the target state's 'status' to make sure the 
+		 * transition was successful.
+		 * Note that we'll poll for up to 1ms (100 cycles of 10us) 
+		 * before giving up.
+		 */
+
+		port = data->acpi_data.status_register.address;
+		bit_width = data->acpi_data.status_register.bit_width;
+
+		dprintk("Looking for 0x%08x from port 0x%04x\n",
+			(u32) data->acpi_data.states[state].status, port);
+
+		for (i=0; i<100; i++) {
+			ret = acpi_processor_read_port(port, bit_width, &value);
+			if (ret) {	
+				dprintk("Invalid port width 0x%04x\n", bit_width);
+				retval = ret;
+				goto migrate_end;
+			}
+			if (value == (u32) data->acpi_data.states[state].status)
+				break;
+			udelay(10);
 		}
-		if (value == (u32) data->acpi_data.states[state].status)
-			break;
-		udelay(10);
+	} else {
+		i = 0;
+		value = (u32) data->acpi_data.states[state].status;
 	}
 
 	/* notify cpufreq */
 	cpufreq_notify_transition(&cpufreq_freqs, CPUFREQ_POSTCHANGE);
 
-	if (value != (u32) data->acpi_data.states[state].status) {
+	if (unlikely(value != (u32) data->acpi_data.states[state].status)) {
 		unsigned int tmp = cpufreq_freqs.new;
 		cpufreq_freqs.new = cpufreq_freqs.old;
 		cpufreq_freqs.old = tmp;
@@ -537,6 +550,8 @@ acpi_cpufreq_exit (void)
 	return;
 }
 
+module_param(acpi_pstate_strict, uint, 0644);
+MODULE_PARM_DESC(acpi_pstate_strict, "value 0 or non-zero. non-zero -> strict ACPI checks are performed during frequency changes.");
 
 late_initcall(acpi_cpufreq_init);
 module_exit(acpi_cpufreq_exit);

arch/i386/kernel/dmi_scan.c

@@ -6,32 +6,28 @@
 #include <linux/bootmem.h>
 
 
-struct dmi_header {
-	u8 type;
-	u8 length;
-	u16 handle;
-};
-
-#undef DMI_DEBUG
-
-#ifdef DMI_DEBUG
-#define dmi_printk(x) printk x
-#else
-#define dmi_printk(x)
-#endif
-
 static char * __init dmi_string(struct dmi_header *dm, u8 s)
 {
 	u8 *bp = ((u8 *) dm) + dm->length;
+	char *str = "";
 
-	if (!s)
-		return "";
-	s--;
-	while (s > 0 && *bp) {
-		bp += strlen(bp) + 1;
+	if (s) {
 		s--;
-	}
-	return bp;
+		while (s > 0 && *bp) {
+			bp += strlen(bp) + 1;
+			s--;
+		}
+
+		if (*bp != 0) {
+			str = alloc_bootmem(strlen(bp) + 1);
+			if (str != NULL)
+				strcpy(str, bp);
+			else
+				printk(KERN_ERR "dmi_string: out of memory.\n");
+		}
+ 	}
+
+	return str;
 }
 
 /*
@@ -84,69 +80,76 @@ static int __init dmi_checksum(u8 *buf)
 	return sum == 0;
 }
 
-static int __init dmi_iterate(void (*decode)(struct dmi_header *))
+static char *dmi_ident[DMI_STRING_MAX];
+static LIST_HEAD(dmi_devices);
+
+/*
+ *	Save a DMI string
+ */
+static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
 {
-	u8 buf[15];
-	char __iomem *p, *q;
+	char *p, *d = (char*) dm;
 
-	/*
-	 * no iounmap() for that ioremap(); it would be a no-op, but it's
-	 * so early in setup that sucker gets confused into doing what
-	 * it shouldn't if we actually call it.
-	 */
-	p = ioremap(0xF0000, 0x10000);
+	if (dmi_ident[slot])
+		return;
+
+	p = dmi_string(dm, d[string]);
 	if (p == NULL)
-		return -1;
+		return;
 
-	for (q = p; q < p + 0x10000; q += 16) {
-		memcpy_fromio(buf, q, 15);
-		if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
-			u16 num = (buf[13] << 8) | buf[12];
-			u16 len = (buf[7] << 8) | buf[6];
-			u32 base = (buf[11] << 24) | (buf[10] << 16) |
-				   (buf[9] << 8) | buf[8];
+	dmi_ident[slot] = p;
+}
 
-			/*
-			 * DMI version 0.0 means that the real version is taken from
-			 * the SMBIOS version, which we don't know at this point.
-			 */
-			if (buf[14] != 0)
-				printk(KERN_INFO "DMI %d.%d present.\n",
-					buf[14] >> 4, buf[14] & 0xF);
-			else
-				printk(KERN_INFO "DMI present.\n");
+static void __init dmi_save_devices(struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+	struct dmi_device *dev;
+
+	for (i = 0; i < count; i++) {
+		char *d = ((char *) dm) + (i * 2);
 
-			dmi_printk((KERN_INFO "%d structures occupying %d bytes.\n",
-				num, len));
-			dmi_printk((KERN_INFO "DMI table at 0x%08X.\n", base));
+		/* Skip disabled device */
+		if ((*d & 0x80) == 0)
+			continue;
 
-			if (dmi_table(base,len, num, decode) == 0)
-				return 0;
+		dev = alloc_bootmem(sizeof(*dev));
+		if (!dev) {
+			printk(KERN_ERR "dmi_save_devices: out of memory.\n");
+			break;
 		}
+
+		dev->type = *d++ & 0x7f;
+		dev->name = dmi_string(dm, *d);
+		dev->device_data = NULL;
+
+		list_add(&dev->list, &dmi_devices);
 	}
-	return -1;
 }
 
-static char *dmi_ident[DMI_STRING_MAX];
-
-/*
- *	Save a DMI string
- */
-static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
+static void __init dmi_save_ipmi_device(struct dmi_header *dm)
 {
-	char *d = (char*)dm;
-	char *p = dmi_string(dm, d[string]);
+	struct dmi_device *dev;
+	void * data;
 
-	if (p == NULL || *p == 0)
+	data = alloc_bootmem(dm->length);
+	if (data == NULL) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
 		return;
-	if (dmi_ident[slot])
+	}
+
+	memcpy(data, dm, dm->length);
+
+	dev = alloc_bootmem(sizeof(*dev));
+	if (!dev) {
+		printk(KERN_ERR "dmi_save_ipmi_device: out of memory.\n");
 		return;
+	}
 
-	dmi_ident[slot] = alloc_bootmem(strlen(p) + 1);
-	if(dmi_ident[slot])
-		strcpy(dmi_ident[slot], p);
-	else
-		printk(KERN_ERR "dmi_save_ident: out of memory.\n");
+	dev->type = DMI_DEV_TYPE_IPMI;
+	dev->name = "IPMI controller";
+	dev->device_data = data;
+
+	list_add(&dev->list, &dmi_devices);
 }
 
 /*
@@ -156,42 +159,69 @@ static void __init dmi_save_ident(struct dmi_header *dm, int slot, int string)
  */
 static void __init dmi_decode(struct dmi_header *dm)
 {
-	u8 *data __attribute__((__unused__)) = (u8 *)dm;
-	
 	switch(dm->type) {
-	case  0:
-		dmi_printk(("BIOS Vendor: %s\n", dmi_string(dm, data[4])));
+	case 0:		/* BIOS Information */
 		dmi_save_ident(dm, DMI_BIOS_VENDOR, 4);
-		dmi_printk(("BIOS Version: %s\n", dmi_string(dm, data[5])));
 		dmi_save_ident(dm, DMI_BIOS_VERSION, 5);
-		dmi_printk(("BIOS Release: %s\n", dmi_string(dm, data[8])));
 		dmi_save_ident(dm, DMI_BIOS_DATE, 8);
 		break;
-	case 1:
-		dmi_printk(("System Vendor: %s\n", dmi_string(dm, data[4])));
+	case 1:		/* System Information */
 		dmi_save_ident(dm, DMI_SYS_VENDOR, 4);
-		dmi_printk(("Product Name: %s\n", dmi_string(dm, data[5])));
 		dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
-		dmi_printk(("Version: %s\n", dmi_string(dm, data[6])));
 		dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
-		dmi_printk(("Serial Number: %s\n", dmi_string(dm, data[7])));
 		dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
 		break;
-	case 2:
-		dmi_printk(("Board Vendor: %s\n", dmi_string(dm, data[4])));
+	case 2:		/* Base Board Information */
 		dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
-		dmi_printk(("Board Name: %s\n", dmi_string(dm, data[5])));
 		dmi_save_ident(dm, DMI_BOARD_NAME, 5);
-		dmi_printk(("Board Version: %s\n", dmi_string(dm, data[6])));
 		dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
 		break;
+	case 10:	/* Onboard Devices Information */
+		dmi_save_devices(dm);
+		break;
+	case 38:	/* IPMI Device Information */
+		dmi_save_ipmi_device(dm);
 	}
 }
 
 void __init dmi_scan_machine(void)
 {
-	if (dmi_iterate(dmi_decode))
-		printk(KERN_INFO "DMI not present.\n");
+	u8 buf[15];
+	char __iomem *p, *q;
+
+	/*
+	 * no iounmap() for that ioremap(); it would be a no-op, but it's
+	 * so early in setup that sucker gets confused into doing what
+	 * it shouldn't if we actually call it.
+	 */
+	p = ioremap(0xF0000, 0x10000);
+	if (p == NULL)
+		goto out;
+
+	for (q = p; q < p + 0x10000; q += 16) {
+		memcpy_fromio(buf, q, 15);
+		if ((memcmp(buf, "_DMI_", 5) == 0) && dmi_checksum(buf)) {
+			u16 num = (buf[13] << 8) | buf[12];
+			u16 len = (buf[7] << 8) | buf[6];
+			u32 base = (buf[11] << 24) | (buf[10] << 16) |
+				   (buf[9] << 8) | buf[8];
+
+			/*
+			 * DMI version 0.0 means that the real version is taken from
+			 * the SMBIOS version, which we don't know at this point.
+			 */
+			if (buf[14] != 0)
+				printk(KERN_INFO "DMI %d.%d present.\n",
+					buf[14] >> 4, buf[14] & 0xF);
+			else
+				printk(KERN_INFO "DMI present.\n");
+
+			if (dmi_table(base,len, num, dmi_decode) == 0)
+				return;
+		}
+	}
+
+out:	printk(KERN_INFO "DMI not present.\n");
 }
 
 
@@ -218,9 +248,9 @@ int dmi_check_system(struct dmi_system_id *list)
 			/* No match */
 			goto fail;
 		}
+		count++;
 		if (d->callback && d->callback(d))
 			break;
-		count++;
 fail:		d++;
 	}
 
@@ -240,3 +270,32 @@ char *dmi_get_system_info(int field)
 	return dmi_ident[field];
 }
 EXPORT_SYMBOL(dmi_get_system_info);
+
+/**
+ *	dmi_find_device - find onboard device by type/name
+ *	@type: device type or %DMI_DEV_TYPE_ANY to match all device types
+ *	@desc: device name string or %NULL to match all
+ *	@from: previous device found in search, or %NULL for new search.
+ *
+ *	Iterates through the list of known onboard devices. If a device is
+ *	found with a matching @vendor and @device, a pointer to its device
+ *	structure is returned.  Otherwise, %NULL is returned.
+ *	A new search is initiated by passing %NULL to the @from argument.
+ *	If @from is not %NULL, searches continue from next device.
+ */
+struct dmi_device * dmi_find_device(int type, const char *name,
+				    struct dmi_device *from)
+{
+	struct list_head *d, *head = from ? &from->list : &dmi_devices;
+
+	for(d = head->next; d != &dmi_devices; d = d->next) {
+		struct dmi_device *dev = list_entry(d, struct dmi_device, list);
+
+		if (((type == DMI_DEV_TYPE_ANY) || (dev->type == type)) &&
+		    ((name == NULL) || (strcmp(dev->name, name) == 0)))
+			return dev;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL(dmi_find_device);

arch/i386/kernel/entry.S

@@ -507,7 +507,7 @@ label:						\
 	pushl $__KERNEL_CS;			\
 	pushl $sysenter_past_esp
 
-ENTRY(debug)
+KPROBE_ENTRY(debug)
 	cmpl $sysenter_entry,(%esp)
 	jne debug_stack_correct
 	FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
@@ -518,7 +518,7 @@ debug_stack_correct:
 	movl %esp,%eax			# pt_regs pointer
 	call do_debug
 	jmp ret_from_exception
-
+	.previous .text
 /*
  * NMI is doubly nasty. It can happen _while_ we're handling
  * a debug fault, and the debug fault hasn't yet been able to
@@ -591,13 +591,14 @@ nmi_16bit_stack:
 	.long 1b,iret_exc
 .previous
 
-ENTRY(int3)
+KPROBE_ENTRY(int3)
 	pushl $-1			# mark this as an int
 	SAVE_ALL
 	xorl %edx,%edx		# zero error code
 	movl %esp,%eax		# pt_regs pointer
 	call do_int3
 	jmp ret_from_exception
+	.previous .text
 
 ENTRY(overflow)
 	pushl $0
@@ -631,17 +632,19 @@ ENTRY(stack_segment)
 	pushl $do_stack_segment
 	jmp error_code
 
-ENTRY(general_protection)
+KPROBE_ENTRY(general_protection)
 	pushl $do_general_protection
 	jmp error_code
+	.previous .text
 
 ENTRY(alignment_check)
 	pushl $do_alignment_check
 	jmp error_code
 
-ENTRY(page_fault)
+KPROBE_ENTRY(page_fault)
 	pushl $do_page_fault
 	jmp error_code
+	.previous .text
 
 #ifdef CONFIG_X86_MCE
 ENTRY(machine_check)

arch/i386/kernel/io_apic.c

@@ -33,6 +33,7 @@
 #include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/sysdev.h>
+
 #include <asm/io.h>
 #include <asm/smp.h>
 #include <asm/desc.h>
@@ -77,7 +78,7 @@ static struct irq_pin_list {
 	int apic, pin, next;
 } irq_2_pin[PIN_MAP_SIZE];
 
-int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
 #ifdef CONFIG_PCI_MSI
 #define vector_to_irq(vector) 	\
 	(platform_legacy_irq(vector) ? vector : vector_irq[vector])
@@ -222,13 +223,21 @@ static void clear_IO_APIC (void)
 			clear_IO_APIC_pin(apic, pin);
 }
 
+#ifdef CONFIG_SMP
 static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 {
 	unsigned long flags;
 	int pin;
 	struct irq_pin_list *entry = irq_2_pin + irq;
 	unsigned int apicid_value;
+	cpumask_t tmp;
 	
+	cpus_and(tmp, cpumask, cpu_online_map);
+	if (cpus_empty(tmp))
+		tmp = TARGET_CPUS;
+
+	cpus_and(cpumask, tmp, CPU_MASK_ALL);
+
 	apicid_value = cpu_mask_to_apicid(cpumask);
 	/* Prepare to do the io_apic_write */
 	apicid_value = apicid_value << 24;
@@ -242,6 +251,7 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 			break;
 		entry = irq_2_pin + entry->next;
 	}
+	set_irq_info(irq, cpumask);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 }
 
@@ -259,7 +269,6 @@ static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
 #  define Dprintk(x...) 
 # endif
 
-cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS];
 
 #define IRQBALANCE_CHECK_ARCH -999
 static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
@@ -328,12 +337,7 @@ static inline void balance_irq(int cpu, int irq)
 	cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
 	new_cpu = move(cpu, allowed_mask, now, 1);
 	if (cpu != new_cpu) {
-		irq_desc_t *desc = irq_desc + irq;
-		unsigned long flags;
-
-		spin_lock_irqsave(&desc->lock, flags);
-		pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu);
-		spin_unlock_irqrestore(&desc->lock, flags);
+		set_pending_irq(irq, cpumask_of_cpu(new_cpu));
 	}
 }
 
@@ -528,16 +532,12 @@ tryanotherirq:
 	cpus_and(tmp, target_cpu_mask, allowed_mask);
 
 	if (!cpus_empty(tmp)) {
-		irq_desc_t *desc = irq_desc + selected_irq;
-		unsigned long flags;
 
 		Dprintk("irq = %d moved to cpu = %d\n",
 				selected_irq, min_loaded);
 		/* mark for change destination */
-		spin_lock_irqsave(&desc->lock, flags);
-		pending_irq_balance_cpumask[selected_irq] =
-					cpumask_of_cpu(min_loaded);
-		spin_unlock_irqrestore(&desc->lock, flags);
+		set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
+
 		/* Since we made a change, come back sooner to 
 		 * check for more variation.
 		 */
@@ -568,7 +568,8 @@ static int balanced_irq(void *unused)
 	
 	/* push everything to CPU 0 to give us a starting point.  */
 	for (i = 0 ; i < NR_IRQS ; i++) {
-		pending_irq_balance_cpumask[i] = cpumask_of_cpu(0);
+		pending_irq_cpumask[i] = cpumask_of_cpu(0);
+		set_pending_irq(i, cpumask_of_cpu(0));
 	}
 
 	for ( ; ; ) {
@@ -647,20 +648,9 @@ int __init irqbalance_disable(char *str)
 
 __setup("noirqbalance", irqbalance_disable);
 
-static inline void move_irq(int irq)
-{
-	/* note - we hold the desc->lock */
-	if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) {
-		set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]);
-		cpus_clear(pending_irq_balance_cpumask[irq]);
-	}
-}
-
 late_initcall(balanced_irq_init);
-
-#else /* !CONFIG_IRQBALANCE */
-static inline void move_irq(int irq) { }
 #endif /* CONFIG_IRQBALANCE */
+#endif /* CONFIG_SMP */
 
 #ifndef CONFIG_SMP
 void fastcall send_IPI_self(int vector)
@@ -820,6 +810,7 @@ EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
  * we need to reprogram the ioredtbls to cater for the cpus which have come online
  * so mask in all cases should simply be TARGET_CPUS
  */
+#ifdef CONFIG_SMP
 void __init setup_ioapic_dest(void)
 {
 	int pin, ioapic, irq, irq_entry;
@@ -838,6 +829,7 @@ void __init setup_ioapic_dest(void)
 
 	}
 }
+#endif
 
 /*
  * EISA Edge/Level control register, ELCR
@@ -1127,7 +1119,7 @@ static inline int IO_APIC_irq_trigger(int irq)
 }
 
 /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS] = { FIRST_DEVICE_VECTOR , 0 };
+u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 };
 
 int assign_irq_vector(int irq)
 {
@@ -1249,6 +1241,7 @@ static void __init setup_IO_APIC_irqs(void)
 		spin_lock_irqsave(&ioapic_lock, flags);
 		io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
 		io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+		set_native_irq_info(irq, TARGET_CPUS);
 		spin_unlock_irqrestore(&ioapic_lock, flags);
 	}
 	}
@@ -1944,6 +1937,7 @@ static void ack_edge_ioapic_vector(unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
+	move_irq(vector);
 	ack_edge_ioapic_irq(irq);
 }
 
@@ -1958,6 +1952,7 @@ static void end_level_ioapic_vector (unsigned int vector)
 {
 	int irq = vector_to_irq(vector);
 
+	move_irq(vector);
 	end_level_ioapic_irq(irq);
 }
 
@@ -1975,14 +1970,17 @@ static void unmask_IO_APIC_vector (unsigned int vector)
 	unmask_IO_APIC_irq(irq);
 }
 
+#ifdef CONFIG_SMP
 static void set_ioapic_affinity_vector (unsigned int vector,
 					cpumask_t cpu_mask)
 {
 	int irq = vector_to_irq(vector);
 
+	set_native_irq_info(vector, cpu_mask);
 	set_ioapic_affinity_irq(irq, cpu_mask);
 }
 #endif
+#endif
 
 /*
  * Level and edge triggered IO-APIC interrupts need different handling,
@@ -1992,7 +1990,7 @@ static void set_ioapic_affinity_vector (unsigned int vector,
  * edge-triggered handler, without risking IRQ storms and other ugly
  * races.
  */
-static struct hw_interrupt_type ioapic_edge_type = {
+static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
 	.typename 	= "IO-APIC-edge",
 	.startup 	= startup_edge_ioapic,
 	.shutdown 	= shutdown_edge_ioapic,
@@ -2000,10 +1998,12 @@ static struct hw_interrupt_type ioapic_edge_type = {
 	.disable 	= disable_edge_ioapic,
 	.ack 		= ack_edge_ioapic,
 	.end 		= end_edge_ioapic,
+#ifdef CONFIG_SMP
 	.set_affinity 	= set_ioapic_affinity,
+#endif
 };
 
-static struct hw_interrupt_type ioapic_level_type = {
+static struct hw_interrupt_type ioapic_level_type __read_mostly = {
 	.typename 	= "IO-APIC-level",
 	.startup 	= startup_level_ioapic,
 	.shutdown 	= shutdown_level_ioapic,
@@ -2011,7 +2011,9 @@ static struct hw_interrupt_type ioapic_level_type = {
 	.disable 	= disable_level_ioapic,
 	.ack 		= mask_and_ack_level_ioapic,
 	.end 		= end_level_ioapic,
+#ifdef CONFIG_SMP
 	.set_affinity 	= set_ioapic_affinity,
+#endif
 };
 
 static inline void init_IO_APIC_traps(void)
@@ -2074,7 +2076,7 @@ static void ack_lapic_irq (unsigned int irq)
 
 static void end_lapic_irq (unsigned int i) { /* nothing */ }
 
-static struct hw_interrupt_type lapic_irq_type = {
+static struct hw_interrupt_type lapic_irq_type __read_mostly = {
 	.typename 	= "local-APIC-edge",
 	.startup 	= NULL, /* startup_irq() not used for IRQ0 */
 	.shutdown 	= NULL, /* shutdown_irq() not used for IRQ0 */
@@ -2421,7 +2423,7 @@ device_initcall(ioapic_init_sysfs);
                           ACPI-based IOAPIC Configuration
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 
 int __init io_apic_get_unique_id (int ioapic, int apic_id)
 {
@@ -2569,9 +2571,10 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int a
 	spin_lock_irqsave(&ioapic_lock, flags);
 	io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
 	io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+	set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
 	spin_unlock_irqrestore(&ioapic_lock, flags);
 
 	return 0;
 }
 
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */

arch/i386/kernel/kprobes.c

@@ -62,32 +62,32 @@ static inline int is_IF_modifier(kprobe_opcode_t opcode)
 	return 0;
 }
 
-int arch_prepare_kprobe(struct kprobe *p)
+int __kprobes arch_prepare_kprobe(struct kprobe *p)
 {
 	return 0;
 }
 
-void arch_copy_kprobe(struct kprobe *p)
+void __kprobes arch_copy_kprobe(struct kprobe *p)
 {
 	memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
 	p->opcode = *p->addr;
 }
 
-void arch_arm_kprobe(struct kprobe *p)
+void __kprobes arch_arm_kprobe(struct kprobe *p)
 {
 	*p->addr = BREAKPOINT_INSTRUCTION;
 	flush_icache_range((unsigned long) p->addr,
 			   (unsigned long) p->addr + sizeof(kprobe_opcode_t));
 }
 
-void arch_disarm_kprobe(struct kprobe *p)
+void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
 	*p->addr = p->opcode;
 	flush_icache_range((unsigned long) p->addr,
 			   (unsigned long) p->addr + sizeof(kprobe_opcode_t));
 }
 
-void arch_remove_kprobe(struct kprobe *p)
+void __kprobes arch_remove_kprobe(struct kprobe *p)
 {
 }
 
@@ -127,7 +127,8 @@ static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->eip = (unsigned long)&p->ainsn.insn;
 }
 
-void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs)
+void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
+				      struct pt_regs *regs)
 {
 	unsigned long *sara = (unsigned long *)&regs->esp;
         struct kretprobe_instance *ri;
@@ -150,7 +151,7 @@ void arch_prepare_kretprobe(struct kretprobe *rp, struct pt_regs *regs)
  * Interrupts are disabled on entry as trap3 is an interrupt gate and they
  * remain disabled thorough out this function.
  */
-static int kprobe_handler(struct pt_regs *regs)
+static int __kprobes kprobe_handler(struct pt_regs *regs)
 {
 	struct kprobe *p;
 	int ret = 0;
@@ -176,7 +177,8 @@ static int kprobe_handler(struct pt_regs *regs)
 		   Disarm the probe we just hit, and ignore it. */
 		p = get_kprobe(addr);
 		if (p) {
-			if (kprobe_status == KPROBE_HIT_SS) {
+			if (kprobe_status == KPROBE_HIT_SS &&
+				*p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
 				regs->eflags &= ~TF_MASK;
 				regs->eflags |= kprobe_saved_eflags;
 				unlock_kprobes();
@@ -220,7 +222,10 @@ static int kprobe_handler(struct pt_regs *regs)
 			 * either a probepoint or a debugger breakpoint
 			 * at this address.  In either case, no further
 			 * handling of this interrupt is appropriate.
+			 * Back up over the (now missing) int3 and run
+			 * the original instruction.
 			 */
+			regs->eip -= sizeof(kprobe_opcode_t);
 			ret = 1;
 		}
 		/* Not one of ours: let kernel handle it */
@@ -259,7 +264,7 @@ no_kprobe:
 /*
  * Called when we hit the probe point at kretprobe_trampoline
  */
-int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
+int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 {
         struct kretprobe_instance *ri = NULL;
         struct hlist_head *head;
@@ -338,7 +343,7 @@ int trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
  * that is atop the stack is the address following the copied instruction.
  * We need to make it the address following the original instruction.
  */
-static void resume_execution(struct kprobe *p, struct pt_regs *regs)
+static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
 {
 	unsigned long *tos = (unsigned long *)&regs->esp;
 	unsigned long next_eip = 0;
@@ -444,8 +449,8 @@ static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 /*
  * Wrapper routine to for handling exceptions.
  */
-int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
-			     void *data)
+int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
+				       unsigned long val, void *data)
 {
 	struct die_args *args = (struct die_args *)data;
 	switch (val) {
@@ -473,7 +478,7 @@ int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val,
 	return NOTIFY_DONE;
 }
 
-int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
+int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	struct jprobe *jp = container_of(p, struct jprobe, kp);
 	unsigned long addr;
@@ -495,7 +500,7 @@ int setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-void jprobe_return(void)
+void __kprobes jprobe_return(void)
 {
 	preempt_enable_no_resched();
 	asm volatile ("       xchgl   %%ebx,%%esp     \n"
@@ -506,7 +511,7 @@ void jprobe_return(void)
 		      (jprobe_saved_esp):"memory");
 }
 
-int longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
+int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 {
 	u8 *addr = (u8 *) (regs->eip - 1);
 	unsigned long stack_addr = (unsigned long)jprobe_saved_esp;

arch/i386/kernel/mpparse.c

@@ -668,8 +668,6 @@ void __init get_smp_config (void)
 	struct intel_mp_floating *mpf = mpf_found;
 
 	/*
-	 * ACPI may be used to obtain the entire SMP configuration or just to 
-	 * enumerate/configure processors (CONFIG_ACPI_BOOT).  Note that 
 	 * ACPI supports both logical (e.g. Hyper-Threading) and physical 
 	 * processors, where MPS only supports physical.
 	 */
@@ -825,7 +823,7 @@ void __init find_smp_config (void)
                             ACPI-based MP Configuration
    -------------------------------------------------------------------------- */
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 
 void __init mp_register_lapic_address (
 	u64			address)
@@ -871,7 +869,7 @@ void __init mp_register_lapic (
 	MP_processor_info(&processor);
 }
 
-#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
+#ifdef	CONFIG_X86_IO_APIC
 
 #define MP_ISA_BUS		0
 #define MP_MAX_IOAPIC_PIN	127
@@ -1086,11 +1084,9 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 	 */
 	static int		gsi_to_irq[MAX_GSI_NUM];
 
-#ifdef CONFIG_ACPI_BUS
 	/* Don't set up the ACPI SCI because it's already set up */
 	if (acpi_fadt.sci_int == gsi)
 		return gsi;
-#endif
 
 	ioapic = mp_find_ioapic(gsi);
 	if (ioapic < 0) {
@@ -1133,13 +1129,11 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 		if (gsi < MAX_GSI_NUM) {
 			if (gsi > 15)
 				gsi = pci_irq++;
-#ifdef CONFIG_ACPI_BUS
 			/*
 			 * Don't assign IRQ used by ACPI SCI
 			 */
 			if (gsi == acpi_fadt.sci_int)
 				gsi = pci_irq++;
-#endif
 			gsi_to_irq[irq] = gsi;
 		} else {
 			printk(KERN_ERR "GSI %u is too high\n", gsi);
@@ -1153,5 +1147,5 @@ int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
 	return gsi;
 }
 
-#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */

arch/i386/kernel/nmi.c

@@ -478,6 +478,11 @@ void touch_nmi_watchdog (void)
 	 */
 	for (i = 0; i < NR_CPUS; i++)
 		alert_counter[i] = 0;
+
+	/*
+	 * Tickle the softlockup detector too:
+	 */
+	touch_softlockup_watchdog();
 }
 
 extern void die_nmi(struct pt_regs *, const char *msg);

arch/i386/kernel/setup.c

@@ -82,19 +82,19 @@ EXPORT_SYMBOL(efi_enabled);
 /* cpu data as detected by the assembly code in head.S */
 struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
 /* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
+struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 1, 0, 0, -1 };
 EXPORT_SYMBOL(boot_cpu_data);
 
 unsigned long mmu_cr4_features;
 
-#ifdef	CONFIG_ACPI_INTERPRETER
+#ifdef	CONFIG_ACPI
 	int acpi_disabled = 0;
 #else
 	int acpi_disabled = 1;
 #endif
 EXPORT_SYMBOL(acpi_disabled);
 
-#ifdef	CONFIG_ACPI_BOOT
+#ifdef	CONFIG_ACPI
 int __initdata acpi_force = 0;
 extern acpi_interrupt_flags	acpi_sci_flags;
 #endif
@@ -798,7 +798,7 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 		}
 #endif
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 		/* "acpi=off" disables both ACPI table parsing and interpreter */
 		else if (!memcmp(from, "acpi=off", 8)) {
 			disable_acpi();
@@ -854,7 +854,7 @@ static void __init parse_cmdline_early (char ** cmdline_p)
 		else if (!memcmp(from, "noapic", 6))
 			disable_ioapic_setup();
 #endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* CONFIG_ACPI_BOOT */
+#endif /* CONFIG_ACPI */
 
 #ifdef CONFIG_X86_LOCAL_APIC
 		/* enable local APIC */
@@ -1579,7 +1579,7 @@ void __init setup_arch(char **cmdline_p)
 	if (efi_enabled)
 		efi_map_memmap();
 
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
 	/*
 	 * Parse the ACPI tables for possible boot-time SMP configuration.
 	 */

arch/i386/kernel/time.c

@@ -194,10 +194,7 @@ int do_settimeofday(struct timespec *tv)
 	set_normalized_timespec(&xtime, sec, nsec);
 	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
 
-	time_adjust = 0;		/* stop active adjtime() */
-	time_status |= STA_UNSYNC;
-	time_maxerror = NTP_PHASE_LIMIT;
-	time_esterror = NTP_PHASE_LIMIT;
+	ntp_clear();
 	write_sequnlock_irq(&xtime_lock);
 	clock_was_set();
 	return 0;
@@ -252,8 +249,7 @@ EXPORT_SYMBOL(profile_pc);
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
-static inline void do_timer_interrupt(int irq, void *dev_id,
-					struct pt_regs *regs)
+static inline void do_timer_interrupt(int irq, struct pt_regs *regs)
 {
 #ifdef CONFIG_X86_IO_APIC
 	if (timer_ack) {
@@ -307,7 +303,7 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 
 	cur_timer->mark_offset();
  
-	do_timer_interrupt(irq, NULL, regs);
+	do_timer_interrupt(irq, regs);
 
 	write_sequnlock(&xtime_lock);
 	return IRQ_HANDLED;
@@ -348,7 +344,7 @@ static void sync_cmos_clock(unsigned long dummy)
 	 * This code is run on a timer.  If the clock is set, that timer
 	 * may not expire at the correct time.  Thus, we adjust...
 	 */
-	if ((time_status & STA_UNSYNC) != 0)
+	if (!ntp_synced())
 		/*
 		 * Not synced, exit, do not restart a timer (if one is
 		 * running, let it run out).
@@ -422,6 +418,7 @@ static int timer_resume(struct sys_device *dev)
 		last_timer->resume();
 	cur_timer = last_timer;
 	last_timer = NULL;
+	touch_softlockup_watchdog();
 	return 0;
 }
 

arch/i386/kernel/timers/timer_hpet.c

@@ -18,8 +18,8 @@
 #include "mach_timer.h"
 #include <asm/hpet.h>
 
-static unsigned long __read_mostly hpet_usec_quotient;	/* convert hpet clks to usec */
-static unsigned long tsc_hpet_quotient;		/* convert tsc to hpet clks */
+static unsigned long hpet_usec_quotient __read_mostly;	/* convert hpet clks to usec */
+static unsigned long tsc_hpet_quotient __read_mostly;	/* convert tsc to hpet clks */
 static unsigned long hpet_last; 	/* hpet counter value at last tick*/
 static unsigned long last_tsc_low;	/* lsb 32 bits of Time Stamp Counter */
 static unsigned long last_tsc_high; 	/* msb 32 bits of Time Stamp Counter */

arch/i386/kernel/traps.c

@@ -363,8 +363,9 @@ static inline void die_if_kernel(const char * str, struct pt_regs * regs, long e
 		die(str, regs, err);
 }
 
-static void do_trap(int trapnr, int signr, char *str, int vm86,
-			   struct pt_regs * regs, long error_code, siginfo_t *info)
+static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
+			      struct pt_regs * regs, long error_code,
+			      siginfo_t *info)
 {
 	struct task_struct *tsk = current;
 	tsk->thread.error_code = error_code;
@@ -460,7 +461,8 @@ DO_ERROR(12, SIGBUS,  "stack segment", stack_segment)
 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
 DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0)
 
-fastcall void do_general_protection(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_general_protection(struct pt_regs * regs,
+					      long error_code)
 {
 	int cpu = get_cpu();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
@@ -657,7 +659,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code)
 
 	++nmi_count(cpu);
 
-	if (!nmi_callback(regs, cpu))
+	if (!rcu_dereference(nmi_callback)(regs, cpu))
 		default_do_nmi(regs);
 
 	nmi_exit();
@@ -665,7 +667,7 @@ fastcall void do_nmi(struct pt_regs * regs, long error_code)
 
 void set_nmi_callback(nmi_callback_t callback)
 {
-	nmi_callback = callback;
+	rcu_assign_pointer(nmi_callback, callback);
 }
 EXPORT_SYMBOL_GPL(set_nmi_callback);
 
@@ -676,7 +678,7 @@ void unset_nmi_callback(void)
 EXPORT_SYMBOL_GPL(unset_nmi_callback);
 
 #ifdef CONFIG_KPROBES
-fastcall void do_int3(struct pt_regs *regs, long error_code)
+fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
 {
 	if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
 			== NOTIFY_STOP)
@@ -710,7 +712,7 @@ fastcall void do_int3(struct pt_regs *regs, long error_code)
  * find every occurrence of the TF bit that could be saved away even
  * by user code)
  */
-fastcall void do_debug(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code)
 {
 	unsigned int condition;
 	struct task_struct *tsk = current;

arch/i386/kernel/vmlinux.lds.S

@@ -22,6 +22,7 @@ SECTIONS
 	*(.text)
 	SCHED_TEXT
 	LOCK_TEXT
+	KPROBES_TEXT
 	*(.fixup)
 	*(.gnu.warning)
 	} = 0x9090

arch/i386/mach-default/topology.c

@@ -76,7 +76,7 @@ static int __init topology_init(void)
 	for_each_online_node(i)
 		arch_register_node(i);
 
-	for_each_cpu(i)
+	for_each_present_cpu(i)
 		arch_register_cpu(i);
 	return 0;
 }
@@ -87,7 +87,7 @@ static int __init topology_init(void)
 {
 	int i;
 
-	for_each_cpu(i)
+	for_each_present_cpu(i)
 		arch_register_cpu(i);
 	return 0;
 }

arch/i386/mach-es7000/es7000plat.c

@@ -51,7 +51,7 @@ struct mip_reg		*host_reg;
 int 			mip_port;
 unsigned long		mip_addr, host_addr;
 
-#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_ACPI_BOOT))
+#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI)
 
 /*
  * GSI override for ES7000 platforms.
@@ -73,7 +73,7 @@ es7000_rename_gsi(int ioapic, int gsi)
 	return gsi;
 }
 
-#endif // (CONFIG_X86_IO_APIC) && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)
+#endif	/* (CONFIG_X86_IO_APIC) && (CONFIG_ACPI) */
 
 void __init
 setup_unisys ()

arch/i386/mm/discontig.c

@@ -37,7 +37,7 @@
 #include <asm/mmzone.h>
 #include <bios_ebda.h>
 
-struct pglist_data *node_data[MAX_NUMNODES];
+struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 bootmem_data_t node0_bdata;
 
@@ -49,8 +49,8 @@ bootmem_data_t node0_bdata;
  * 2) node_start_pfn   - the starting page frame number for a node
  * 3) node_end_pfn     - the ending page fram number for a node
  */
-unsigned long node_start_pfn[MAX_NUMNODES];
-unsigned long node_end_pfn[MAX_NUMNODES];
+unsigned long node_start_pfn[MAX_NUMNODES] __read_mostly;
+unsigned long node_end_pfn[MAX_NUMNODES] __read_mostly;
 
 
 #ifdef CONFIG_DISCONTIGMEM
@@ -66,7 +66,7 @@ unsigned long node_end_pfn[MAX_NUMNODES];
  *     physnode_map[4-7] = 1;
  *     physnode_map[8- ] = -1;
  */
-s8 physnode_map[MAX_ELEMENTS] = { [0 ... (MAX_ELEMENTS - 1)] = -1};
+s8 physnode_map[MAX_ELEMENTS] __read_mostly = { [0 ... (MAX_ELEMENTS - 1)] = -1};
 EXPORT_SYMBOL(physnode_map);
 
 void memory_present(int nid, unsigned long start, unsigned long end)

arch/i386/mm/fault.c

@@ -21,6 +21,7 @@
 #include <linux/vt_kern.h>		/* For unblank_screen() */
 #include <linux/highmem.h>
 #include <linux/module.h>
+#include <linux/kprobes.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
@@ -223,7 +224,8 @@ fastcall void do_invalid_op(struct pt_regs *, unsigned long);
  *	bit 1 == 0 means read, 1 means write
  *	bit 2 == 0 means kernel, 1 means user-mode
  */
-fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
+fastcall void __kprobes do_page_fault(struct pt_regs *regs,
+				      unsigned long error_code)
 {
 	struct task_struct *tsk;
 	struct mm_struct *mm;

arch/i386/mm/init.c

@@ -393,7 +393,7 @@ void zap_low_mappings (void)
 }
 
 static int disable_nx __initdata = 0;
-u64 __supported_pte_mask = ~_PAGE_NX;
+u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
 
 /*
  * noexec = on|off

arch/i386/oprofile/init.c

@@ -15,9 +15,9 @@
  * with the NMI mode driver.
  */
  
-extern int nmi_init(struct oprofile_operations * ops);
-extern int nmi_timer_init(struct oprofile_operations * ops);
-extern void nmi_exit(void);
+extern int op_nmi_init(struct oprofile_operations * ops);
+extern int op_nmi_timer_init(struct oprofile_operations * ops);
+extern void op_nmi_exit(void);
 extern void x86_backtrace(struct pt_regs * const regs, unsigned int depth);
 
 
@@ -28,11 +28,11 @@ int __init oprofile_arch_init(struct oprofile_operations * ops)
 	ret = -ENODEV;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	ret = nmi_init(ops);
+	ret = op_nmi_init(ops);
 #endif
 #ifdef CONFIG_X86_IO_APIC
 	if (ret < 0)
-		ret = nmi_timer_init(ops);
+		ret = op_nmi_timer_init(ops);
 #endif
 	ops->backtrace = x86_backtrace;
 
@@ -43,6 +43,6 @@ int __init oprofile_arch_init(struct oprofile_operations * ops)
 void oprofile_arch_exit(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
-	nmi_exit();
+	op_nmi_exit();
 #endif
 }

arch/i386/oprofile/nmi_int.c

@@ -355,7 +355,7 @@ static int __init ppro_init(char ** cpu_type)
 /* in order to get driverfs right */
 static int using_nmi;
 
-int __init nmi_init(struct oprofile_operations *ops)
+int __init op_nmi_init(struct oprofile_operations *ops)
 {
 	__u8 vendor = boot_cpu_data.x86_vendor;
 	__u8 family = boot_cpu_data.x86;
@@ -420,7 +420,7 @@ int __init nmi_init(struct oprofile_operations *ops)
 }
 
 
-void nmi_exit(void)
+void op_nmi_exit(void)
 {
 	if (using_nmi)
 		exit_driverfs();

arch/i386/oprofile/nmi_timer_int.c

@@ -40,7 +40,7 @@ static void timer_stop(void)
 }
 
 
-int __init nmi_timer_init(struct oprofile_operations * ops)
+int __init op_nmi_timer_init(struct oprofile_operations * ops)
 {
 	extern int nmi_active;
 

arch/i386/pci/Makefile

@@ -5,7 +5,7 @@ obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig.o
 obj-$(CONFIG_PCI_DIRECT)	+= direct.o
 
 pci-y				:= fixup.o
-pci-$(CONFIG_ACPI_PCI)		+= acpi.o
+pci-$(CONFIG_ACPI)		+= acpi.o
 pci-y				+= legacy.o irq.o
 
 pci-$(CONFIG_X86_VISWS)		:= visws.o fixup.o

arch/i386/pci/irq.c

@@ -1075,7 +1075,7 @@ static void pirq_penalize_isa_irq(int irq, int active)
 
 void pcibios_penalize_isa_irq(int irq, int active)
 {
-#ifdef CONFIG_ACPI_PCI
+#ifdef CONFIG_ACPI
 	if (!acpi_noirq)
 		acpi_penalize_isa_irq(irq, active);
 	else

arch/ia64/Kconfig

@@ -60,6 +60,7 @@ choice
 
 config IA64_GENERIC
 	bool "generic"
+	select ACPI
 	select NUMA
 	select ACPI_NUMA
 	select VIRTUAL_MEM_MAP
@@ -346,38 +347,10 @@ endmenu
 
 menu "Power management and ACPI"
 
-config PM
-	bool "Power Management support"
-	depends on !IA64_HP_SIM
-	default y
-	help
-	  "Power Management" means that parts of your computer are shut
-	  off or put into a power conserving "sleep" mode if they are not
-	  being used.  There are two competing standards for doing this: APM
-	  and ACPI.  If you want to use either one, say Y here and then also
-	  to the requisite support below.
-
-	  Power Management is most important for battery powered laptop
-	  computers; if you have a laptop, check out the Linux Laptop home
-	  page on the WWW at <http://www.linux-on-laptops.com/> and the
-	  Battery Powered Linux mini-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  Note that, even if you say N here, Linux on the x86 architecture
-	  will issue the hlt instruction if nothing is to be done, thereby
-	  sending the processor to sleep and saving power.
-
-config ACPI
-	bool
-	depends on !IA64_HP_SIM
-	default y
-
-if !IA64_HP_SIM
+source "kernel/power/Kconfig"
 
 source "drivers/acpi/Kconfig"
 
-endif
-
 if PM
 
 source "arch/ia64/kernel/cpufreq/Kconfig"
@@ -429,6 +402,11 @@ config GENERIC_IRQ_PROBE
 	bool
 	default y
 
+config GENERIC_PENDING_IRQ
+	bool
+	depends on GENERIC_HARDIRQS && SMP
+	default y
+
 source "arch/ia64/hp/sim/Kconfig"
 
 source "arch/ia64/oprofile/Kconfig"

arch/ia64/configs/bigsur_defconfig

@@ -107,18 +107,12 @@ CONFIG_ACPI=y
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=m
-CONFIG_ACPI_VIDEO=m
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
 CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
 
 #

arch/ia64/configs/sn2_defconfig

@@ -129,19 +129,12 @@ CONFIG_ACPI=y
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
 # CONFIG_ACPI_BUTTON is not set
-CONFIG_ACPI_VIDEO=m
-CONFIG_ACPI_HOTKEY=m
 # CONFIG_ACPI_FAN is not set
 # CONFIG_ACPI_PROCESSOR is not set
 CONFIG_ACPI_NUMA=y
-CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
 CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set
 

arch/ia64/configs/tiger_defconfig

@@ -127,20 +127,13 @@ CONFIG_ACPI=y
 #
 # ACPI (Advanced Configuration and Power Interface) Support
 #
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
 CONFIG_ACPI_BUTTON=m
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_ACPI_HOTKEY is not set
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 # CONFIG_ACPI_HOTPLUG_CPU is not set
 CONFIG_ACPI_THERMAL=m
-CONFIG_ACPI_BLACKLIST_YEAR=0
 # CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
 CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
 CONFIG_ACPI_SYSTEM=y
 # CONFIG_ACPI_CONTAINER is not set