Merge branch 'NCSI-vlan-filtering'

Samuel Mendoza-Jonas says:

====================
NCSI VLAN Filtering Support

This series (mainly patch 2) adds VLAN filtering to the NCSI implementation.
A fair amount of code already exists in the NCSI stack for VLAN filtering but
none of it is actually hooked up. This goes the final mile and fixes a few
bugs in the existing code found along the way (patch 1).

Patch 3 adds the appropriate flag and callbacks to the ftgmac100 driver to
enable filtering as it's a large consumer of NCSI (and what I've been
testing on).

v3:	- Add comment describing change to ncsi_find_filter()
	- Catch NULL in clear_one_vid() from ncsi_get_filter()
	- Simplify state changes when kicking updated channel
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/faraday/ftgmac100.c

@@ -1623,6 +1623,8 @@ static const struct net_device_ops ftgmac100_netdev_ops = {
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= ftgmac100_poll_controller,
 #endif
+	.ndo_vlan_rx_add_vid	= ncsi_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= ncsi_vlan_rx_kill_vid,
 };
 
 static int ftgmac100_setup_mdio(struct net_device *netdev)
@@ -1837,6 +1839,9 @@ static int ftgmac100_probe(struct platform_device *pdev)
 		NETIF_F_GRO | NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX |
 		NETIF_F_HW_VLAN_CTAG_TX;
 
+	if (priv->use_ncsi)
+		netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
+
 	/* AST2400  doesn't have working HW checksum generation */
 	if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
 		netdev->hw_features &= ~NETIF_F_HW_CSUM;

include/net/ncsi.h

@@ -28,6 +28,8 @@ struct ncsi_dev {
 };
 
 #ifdef CONFIG_NET_NCSI
+int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid);
+int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid);
 struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
 				   void (*notifier)(struct ncsi_dev *nd));
 int ncsi_start_dev(struct ncsi_dev *nd);

net/ncsi/internal.h

@@ -180,6 +180,7 @@ struct ncsi_channel {
 #define NCSI_CHANNEL_INACTIVE		1
 #define NCSI_CHANNEL_ACTIVE		2
 #define NCSI_CHANNEL_INVISIBLE		3
+	bool                        reconfigure_needed;
 	spinlock_t                  lock;	/* Protect filters etc */
 	struct ncsi_package         *package;
 	struct ncsi_channel_version version;
@@ -235,6 +236,9 @@ enum {
 	ncsi_dev_state_probe_dp,
 	ncsi_dev_state_config_sp	= 0x0301,
 	ncsi_dev_state_config_cis,
+	ncsi_dev_state_config_clear_vids,
+	ncsi_dev_state_config_svf,
+	ncsi_dev_state_config_ev,
 	ncsi_dev_state_config_sma,
 	ncsi_dev_state_config_ebf,
 #if IS_ENABLED(CONFIG_IPV6)
@@ -253,6 +257,12 @@ enum {
 	ncsi_dev_state_suspend_done
 };
 
+struct vlan_vid {
+	struct list_head list;
+	__be16 proto;
+	u16 vid;
+};
+
 struct ncsi_dev_priv {
 	struct ncsi_dev     ndev;            /* Associated NCSI device     */
 	unsigned int        flags;           /* NCSI device flags          */
@@ -276,6 +286,7 @@ struct ncsi_dev_priv {
 	struct work_struct  work;            /* For channel management     */
 	struct packet_type  ptype;           /* NCSI packet Rx handler     */
 	struct list_head    node;            /* Form NCSI device list      */
+	struct list_head    vlan_vids;       /* List of active VLAN IDs */
 };
 
 struct ncsi_cmd_arg {

net/ncsi/ncsi-cmd.c

@@ -139,9 +139,9 @@ static int ncsi_cmd_handler_svf(struct sk_buff *skb,
 	struct ncsi_cmd_svf_pkt *cmd;
 
 	cmd = skb_put_zero(skb, sizeof(*cmd));
-	cmd->vlan = htons(nca->words[0]);
-	cmd->index = nca->bytes[2];
-	cmd->enable = nca->bytes[3];
+	cmd->vlan = htons(nca->words[1]);
+	cmd->index = nca->bytes[6];
+	cmd->enable = nca->bytes[7];
 	ncsi_cmd_build_header(&cmd->cmd.common, nca);
 
 	return 0;
@@ -153,7 +153,7 @@ static int ncsi_cmd_handler_ev(struct sk_buff *skb,
 	struct ncsi_cmd_ev_pkt *cmd;
 
 	cmd = skb_put_zero(skb, sizeof(*cmd));
-	cmd->mode = nca->bytes[0];
+	cmd->mode = nca->bytes[3];
 	ncsi_cmd_build_header(&cmd->cmd.common, nca);
 
 	return 0;
@@ -228,7 +228,7 @@ static struct ncsi_cmd_handler {
 	{ NCSI_PKT_CMD_AE,     8, ncsi_cmd_handler_ae      },
 	{ NCSI_PKT_CMD_SL,     8, ncsi_cmd_handler_sl      },
 	{ NCSI_PKT_CMD_GLS,    0, ncsi_cmd_handler_default },
-	{ NCSI_PKT_CMD_SVF,    4, ncsi_cmd_handler_svf     },
+	{ NCSI_PKT_CMD_SVF,    8, ncsi_cmd_handler_svf     },
 	{ NCSI_PKT_CMD_EV,     4, ncsi_cmd_handler_ev      },
 	{ NCSI_PKT_CMD_DV,     0, ncsi_cmd_handler_default },
 	{ NCSI_PKT_CMD_SMA,    8, ncsi_cmd_handler_sma     },

net/ncsi/ncsi-manage.c

@@ -38,6 +38,25 @@ static inline int ncsi_filter_size(int table)
 	return sizes[table];
 }
 
+u32 *ncsi_get_filter(struct ncsi_channel *nc, int table, int index)
+{
+	struct ncsi_channel_filter *ncf;
+	int size;
+
+	ncf = nc->filters[table];
+	if (!ncf)
+		return NULL;
+
+	size = ncsi_filter_size(table);
+	if (size < 0)
+		return NULL;
+
+	return ncf->data + size * index;
+}
+
+/* Find the first active filter in a filter table that matches the given
+ * data parameter. If data is NULL, this returns the first active filter.
+ */
 int ncsi_find_filter(struct ncsi_channel *nc, int table, void *data)
 {
 	struct ncsi_channel_filter *ncf;
@@ -58,7 +77,7 @@ int ncsi_find_filter(struct ncsi_channel *nc, int table, void *data)
 	index = -1;
 	while ((index = find_next_bit(bitmap, ncf->total, index + 1))
 	       < ncf->total) {
-		if (!memcmp(ncf->data + size * index, data, size)) {
+		if (!data || !memcmp(ncf->data + size * index, data, size)) {
 			spin_unlock_irqrestore(&nc->lock, flags);
 			return index;
 		}
@@ -639,6 +658,95 @@ error:
 	nd->state = ncsi_dev_state_functional;
 }
 
+/* Check the VLAN filter bitmap for a set filter, and construct a
+ * "Set VLAN Filter - Disable" packet if found.
+ */
+static int clear_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
+			 struct ncsi_cmd_arg *nca)
+{
+	int index;
+	u32 *data;
+	u16 vid;
+
+	index = ncsi_find_filter(nc, NCSI_FILTER_VLAN, NULL);
+	if (index < 0) {
+		/* Filter table empty */
+		return -1;
+	}
+
+	data = ncsi_get_filter(nc, NCSI_FILTER_VLAN, index);
+	if (!data) {
+		netdev_err(ndp->ndev.dev,
+			   "ncsi: failed to retrieve filter %d\n", index);
+		/* Set the VLAN id to 0 - this will still disable the entry in
+		 * the filter table, but we won't know what it was.
+		 */
+		vid = 0;
+	} else {
+		vid = *(u16 *)data;
+	}
+
+	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+		      "ncsi: removed vlan tag %u at index %d\n",
+		      vid, index + 1);
+	ncsi_remove_filter(nc, NCSI_FILTER_VLAN, index);
+
+	nca->type = NCSI_PKT_CMD_SVF;
+	nca->words[1] = vid;
+	/* HW filter index starts at 1 */
+	nca->bytes[6] = index + 1;
+	nca->bytes[7] = 0x00;
+	return 0;
+}
+
+/* Find an outstanding VLAN tag and constuct a "Set VLAN Filter - Enable"
+ * packet.
+ */
+static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
+		       struct ncsi_cmd_arg *nca)
+{
+	struct vlan_vid *vlan = NULL;
+	int index = 0;
+
+	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {
+		index = ncsi_find_filter(nc, NCSI_FILTER_VLAN, &vlan->vid);
+		if (index < 0) {
+			/* New tag to add */
+			netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+				      "ncsi: new vlan id to set: %u\n",
+				      vlan->vid);
+			break;
+		}
+		netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+			      "vid %u already at filter pos %d\n",
+			      vlan->vid, index);
+	}
+
+	if (!vlan || index >= 0) {
+		netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+			      "no vlan ids left to set\n");
+		return -1;
+	}
+
+	index = ncsi_add_filter(nc, NCSI_FILTER_VLAN, &vlan->vid);
+	if (index < 0) {
+		netdev_err(ndp->ndev.dev,
+			   "Failed to add new VLAN tag, error %d\n", index);
+		return -1;
+	}
+
+	netdev_printk(KERN_DEBUG, ndp->ndev.dev,
+		      "ncsi: set vid %u in packet, index %u\n",
+		      vlan->vid, index + 1);
+	nca->type = NCSI_PKT_CMD_SVF;
+	nca->words[1] = vlan->vid;
+	/* HW filter index starts at 1 */
+	nca->bytes[6] = index + 1;
+	nca->bytes[7] = 0x01;
+
+	return 0;
+}
+
 static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 {
 	struct ncsi_dev *nd = &ndp->ndev;
@@ -683,8 +791,11 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		if (ret)
 			goto error;
 
-		nd->state = ncsi_dev_state_config_sma;
+		nd->state = ncsi_dev_state_config_clear_vids;
 		break;
+	case ncsi_dev_state_config_clear_vids:
+	case ncsi_dev_state_config_svf:
+	case ncsi_dev_state_config_ev:
 	case ncsi_dev_state_config_sma:
 	case ncsi_dev_state_config_ebf:
 #if IS_ENABLED(CONFIG_IPV6)
@@ -699,11 +810,40 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		nca.package = np->id;
 		nca.channel = nc->id;
 
+		/* Clear any active filters on the channel before setting */
+		if (nd->state == ncsi_dev_state_config_clear_vids) {
+			ret = clear_one_vid(ndp, nc, &nca);
+			if (ret) {
+				nd->state = ncsi_dev_state_config_svf;
+				schedule_work(&ndp->work);
+				break;
+			}
+			/* Repeat */
+			nd->state = ncsi_dev_state_config_clear_vids;
+		/* Add known VLAN tags to the filter */
+		} else if (nd->state == ncsi_dev_state_config_svf) {
+			ret = set_one_vid(ndp, nc, &nca);
+			if (ret) {
+				nd->state = ncsi_dev_state_config_ev;
+				schedule_work(&ndp->work);
+				break;
+			}
+			/* Repeat */
+			nd->state = ncsi_dev_state_config_svf;
+		/* Enable/Disable the VLAN filter */
+		} else if (nd->state == ncsi_dev_state_config_ev) {
+			if (list_empty(&ndp->vlan_vids)) {
+				nca.type = NCSI_PKT_CMD_DV;
+			} else {
+				nca.type = NCSI_PKT_CMD_EV;
+				nca.bytes[3] = NCSI_CAP_VLAN_NO;
+			}
+			nd->state = ncsi_dev_state_config_sma;
+		} else if (nd->state == ncsi_dev_state_config_sma) {
 		/* Use first entry in unicast filter table. Note that
 		 * the MAC filter table starts from entry 1 instead of
 		 * 0.
 		 */
-		if (nd->state == ncsi_dev_state_config_sma) {
 			nca.type = NCSI_PKT_CMD_SMA;
 			for (index = 0; index < 6; index++)
 				nca.bytes[index] = dev->dev_addr[index];
@@ -751,6 +891,25 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 		break;
 	case ncsi_dev_state_config_done:
 		spin_lock_irqsave(&nc->lock, flags);
+		if (nc->reconfigure_needed) {
+			/* This channel's configuration has been updated
+			 * part-way during the config state - start the
+			 * channel configuration over
+			 */
+			nc->reconfigure_needed = false;
+			nc->state = NCSI_CHANNEL_INACTIVE;
+			spin_unlock_irqrestore(&nc->lock, flags);
+
+			spin_lock_irqsave(&ndp->lock, flags);
+			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
+			spin_unlock_irqrestore(&ndp->lock, flags);
+
+			netdev_printk(KERN_DEBUG, dev,
+				      "Dirty NCSI channel state reset\n");
+			ncsi_process_next_channel(ndp);
+			break;
+		}
+
 		if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) {
 			hot_nc = nc;
 			nc->state = NCSI_CHANNEL_ACTIVE;
@@ -1191,6 +1350,148 @@ static struct notifier_block ncsi_inet6addr_notifier = {
 };
 #endif /* CONFIG_IPV6 */
 
+static int ncsi_kick_channels(struct ncsi_dev_priv *ndp)
+{
+	struct ncsi_dev *nd = &ndp->ndev;
+	struct ncsi_channel *nc;
+	struct ncsi_package *np;
+	unsigned long flags;
+	unsigned int n = 0;
+
+	NCSI_FOR_EACH_PACKAGE(ndp, np) {
+		NCSI_FOR_EACH_CHANNEL(np, nc) {
+			spin_lock_irqsave(&nc->lock, flags);
+
+			/* Channels may be busy, mark dirty instead of
+			 * kicking if;
+			 * a) not ACTIVE (configured)
+			 * b) in the channel_queue (to be configured)
+			 * c) it's ndev is in the config state
+			 */
+			if (nc->state != NCSI_CHANNEL_ACTIVE) {
+				if ((ndp->ndev.state & 0xff00) ==
+						ncsi_dev_state_config ||
+						!list_empty(&nc->link)) {
+					netdev_printk(KERN_DEBUG, nd->dev,
+						      "ncsi: channel %p marked dirty\n",
+						      nc);
+					nc->reconfigure_needed = true;
+				}
+				spin_unlock_irqrestore(&nc->lock, flags);
+				continue;
+			}
+
+			spin_unlock_irqrestore(&nc->lock, flags);
+
+			ncsi_stop_channel_monitor(nc);
+			spin_lock_irqsave(&nc->lock, flags);
+			nc->state = NCSI_CHANNEL_INACTIVE;
+			spin_unlock_irqrestore(&nc->lock, flags);
+
+			spin_lock_irqsave(&ndp->lock, flags);
+			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
+			spin_unlock_irqrestore(&ndp->lock, flags);
+
+			netdev_printk(KERN_DEBUG, nd->dev,
+				      "ncsi: kicked channel %p\n", nc);
+			n++;
+		}
+	}
+
+	return n;
+}
+
+int ncsi_vlan_rx_add_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+	struct ncsi_channel_filter *ncf;
+	struct ncsi_dev_priv *ndp;
+	unsigned int n_vids = 0;
+	struct vlan_vid *vlan;
+	struct ncsi_dev *nd;
+	bool found = false;
+
+	if (vid == 0)
+		return 0;
+
+	nd = ncsi_find_dev(dev);
+	if (!nd) {
+		netdev_warn(dev, "ncsi: No net_device?\n");
+		return 0;
+	}
+
+	ndp = TO_NCSI_DEV_PRIV(nd);
+	ncf = ndp->hot_channel->filters[NCSI_FILTER_VLAN];
+
+	/* Add the VLAN id to our internal list */
+	list_for_each_entry_rcu(vlan, &ndp->vlan_vids, list) {
+		n_vids++;
+		if (vlan->vid == vid) {
+			netdev_printk(KERN_DEBUG, dev,
+				      "vid %u already registered\n", vid);
+			return 0;
+		}
+	}
+
+	if (n_vids >= ncf->total) {
+		netdev_info(dev,
+			    "NCSI Channel supports up to %u VLAN tags but %u are already set\n",
+			    ncf->total, n_vids);
+		return -EINVAL;
+	}
+
+	vlan = kzalloc(sizeof(*vlan), GFP_KERNEL);
+	if (!vlan)
+		return -ENOMEM;
+
+	vlan->proto = proto;
+	vlan->vid = vid;
+	list_add_rcu(&vlan->list, &ndp->vlan_vids);
+
+	netdev_printk(KERN_DEBUG, dev, "Added new vid %u\n", vid);
+
+	found = ncsi_kick_channels(ndp) != 0;
+
+	return found ? ncsi_process_next_channel(ndp) : 0;
+}
+
+int ncsi_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, u16 vid)
+{
+	struct vlan_vid *vlan, *tmp;
+	struct ncsi_dev_priv *ndp;
+	struct ncsi_dev *nd;
+	bool found = false;
+
+	if (vid == 0)
+		return 0;
+
+	nd = ncsi_find_dev(dev);
+	if (!nd) {
+		netdev_warn(dev, "ncsi: no net_device?\n");
+		return 0;
+	}
+
+	ndp = TO_NCSI_DEV_PRIV(nd);
+
+	/* Remove the VLAN id from our internal list */
+	list_for_each_entry_safe(vlan, tmp, &ndp->vlan_vids, list)
+		if (vlan->vid == vid) {
+			netdev_printk(KERN_DEBUG, dev,
+				      "vid %u found, removing\n", vid);
+			list_del_rcu(&vlan->list);
+			found = true;
+			kfree(vlan);
+		}
+
+	if (!found) {
+		netdev_err(dev, "ncsi: vid %u wasn't registered!\n", vid);
+		return -EINVAL;
+	}
+
+	found = ncsi_kick_channels(ndp) != 0;
+
+	return found ? ncsi_process_next_channel(ndp) : 0;
+}
+
 struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
 				   void (*handler)(struct ncsi_dev *ndev))
 {
@@ -1215,6 +1516,7 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
 	nd->handler = handler;
 	ndp->pending_req_num = 0;
 	INIT_LIST_HEAD(&ndp->channel_queue);
+	INIT_LIST_HEAD(&ndp->vlan_vids);
 	INIT_WORK(&ndp->work, ncsi_dev_work);
 
 	/* Initialize private NCSI device */

net/ncsi/ncsi-pkt.h

@@ -104,7 +104,7 @@ struct ncsi_cmd_svf_pkt {
 	unsigned char           index;     /* VLAN table index  */
 	unsigned char           enable;    /* Enable or disable */
 	__be32                  checksum;  /* Checksum          */
-	unsigned char           pad[14];
+	unsigned char           pad[18];
 };
 
 /* Enable VLAN */

net/ncsi/ncsi-rsp.c

@@ -354,7 +354,8 @@ static int ncsi_rsp_handler_svf(struct ncsi_request *nr)
 
 	/* Add or remove the VLAN filter */
 	if (!(cmd->enable & 0x1)) {
-		ret = ncsi_remove_filter(nc, NCSI_FILTER_VLAN, cmd->index);
+		/* HW indexes from 1 */
+		ret = ncsi_remove_filter(nc, NCSI_FILTER_VLAN, cmd->index - 1);
 	} else {
 		vlan = ntohs(cmd->vlan);
 		ret = ncsi_add_filter(nc, NCSI_FILTER_VLAN, &vlan);
@@ -693,7 +694,14 @@ static int ncsi_rsp_handler_gc(struct ncsi_request *nr)
 
 		ncf->index = i;
 		ncf->total = cnt;
-		ncf->bitmap = 0x0ul;
+		if (i == NCSI_FILTER_VLAN) {
+			/* Set VLAN filters active so they are cleared in
+			 * first configuration state
+			 */
+			ncf->bitmap = U64_MAX;
+		} else {
+			ncf->bitmap = 0x0ul;
+		}
 		nc->filters[i] = ncf;
 	}