Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because:
- Maarten needs latest atomic patches from drm-misc.
- Lionel needs the color manager core patch from drm-misc.
- Ander extracted intel_dpll_mgr.c, we need a backmerge to avoid git
  losing track of things too often (right now it seems ok due to
  cherry-picks).
- Tvrtko needs a stable baseline to apply some large-scale renaming
  patches to i915 GEM code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

Documentation/DocBook/device-drivers.tmpl

@@ -229,6 +229,7 @@ X!Isound/sound_firmware.c
 !Iinclude/media/v4l2-dv-timings.h
 !Iinclude/media/v4l2-event.h
 !Iinclude/media/v4l2-flash-led-class.h
+!Iinclude/media/v4l2-mc.h
 !Iinclude/media/v4l2-mediabus.h
 !Iinclude/media/v4l2-mem2mem.h
 !Iinclude/media/v4l2-of.h

Documentation/DocBook/gpu.tmpl

@@ -1816,7 +1816,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="37" valign="top" >DRM</td>
+	<td rowspan="42" valign="top" >DRM</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“rotation”</td>
 	<td valign="top" >BITMASK</td>
@@ -2068,7 +2068,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >property to suggest an Y offset for a connector</td>
 	</tr>
 	<tr>
-	<td rowspan="3" valign="top" >Optional</td>
+	<td rowspan="8" valign="top" >Optional</td>
 	<td valign="top" >“scaling mode”</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
@@ -2092,6 +2092,61 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td valign="top" >“DEGAMMA_LUT”</td>
+	<td valign="top" >BLOB</td>
+	<td valign="top" >0</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >DRM property to set the degamma lookup table
+		(LUT) mapping pixel data from the framebuffer before it is
+		given to the transformation matrix. The data is an interpreted
+		as an array of struct drm_color_lut elements. Hardware might
+		choose not to use the full precision of the LUT elements nor
+		use all the elements of the LUT (for example the hardware
+		might choose to interpolate between LUT[0] and LUT[4]). </td>
+	</tr>
+	<tr>
+	<td valign="top" >“DEGAMMA_LUT_SIZE”</td>
+	<td valign="top" >RANGE | IMMUTABLE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >DRM property to gives the size of the lookup
+		table to be set on the DEGAMMA_LUT property (the size depends
+		on the underlying hardware).</td>
+	</tr>
+	<tr>
+	<td valign="top" >“CTM”</td>
+	<td valign="top" >BLOB</td>
+	<td valign="top" >0</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >DRM property to set the current
+		transformation matrix (CTM) apply to pixel data after the
+		lookup through the degamma LUT and before the lookup through
+		the gamma LUT. The data is an interpreted as a struct
+		drm_color_ctm.</td>
+	</tr>
+	<tr>
+	<td valign="top" >“GAMMA_LUT”</td>
+	<td valign="top" >BLOB</td>
+	<td valign="top" >0</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >DRM property to set the gamma lookup table
+		(LUT) mapping pixel data after to the transformation matrix to
+		data sent to the connector. The data is an interpreted as an
+		array of struct drm_color_lut elements. Hardware might choose
+		not to use the full precision of the LUT elements nor use all
+		the elements of the LUT (for example the hardware might choose
+		to interpolate between LUT[0] and LUT[4]).</td>
+	</tr>
+	<tr>
+	<td valign="top" >“GAMMA_LUT_SIZE”</td>
+	<td valign="top" >RANGE | IMMUTABLE</td>
+	<td valign="top" >Min=0, Max=UINT_MAX</td>
+	<td valign="top" >CRTC</td>
+	<td valign="top" >DRM property to gives the size of the lookup
+		table to be set on the GAMMA_LUT property (the size depends on
+		the underlying hardware).</td>
+	</tr>
+	<tr>
 	<td rowspan="20" valign="top" >i915</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>

Documentation/DocBook/media/v4l/controls.xml

@@ -2329,6 +2329,14 @@ to search and match for the present Macroblock (MB) in the reference picture. Th
 vertical search range for motion estimation module in video encoder.</entry>
 	      </row>
 
+	      <row><entry></entry></row>
+	      <row id="v4l2-mpeg-video-force-key-frame">
+		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME</constant>&nbsp;</entry>
+		<entry>button</entry>
+	      </row><row><entry spanname="descr">Force a key frame for the next queued buffer. Applicable to encoders.
+This is a general, codec-agnostic keyframe control.</entry>
+	      </row>
+
 	      <row><entry></entry></row>
 	      <row>
 		<entry spanname="id"><constant>V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE</constant>&nbsp;</entry>
@@ -5069,6 +5077,46 @@ interface and may change in the future.</para>
 	    This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
 	    </entry>
 	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_DV_TX_IT_CONTENT_TYPE</constant></entry>
+	    <entry id="v4l2-dv-content-type">enum v4l2_dv_it_content_type</entry>
+	  </row>
+	  <row><entry spanname="descr">Configures the IT Content Type
+	    of the transmitted video. This information is sent over HDMI and DisplayPort connectors
+	    as part of the AVI InfoFrame. The term 'IT Content' is used for content that originates
+	    from a computer as opposed to content from a TV broadcast or an analog source. The
+	    enum&nbsp;v4l2_dv_it_content_type defines the possible content types:</entry>
+	  </row>
+	  <row>
+	    <entrytbl spanname="descr" cols="2">
+	      <tbody valign="top">
+	        <row>
+	          <entry><constant>V4L2_DV_IT_CONTENT_TYPE_GRAPHICS</constant>&nbsp;</entry>
+		  <entry>Graphics content. Pixel data should be passed unfiltered and without
+		  analog reconstruction.</entry>
+		</row>
+	        <row>
+	          <entry><constant>V4L2_DV_IT_CONTENT_TYPE_PHOTO</constant>&nbsp;</entry>
+		  <entry>Photo content. The content is derived from digital still pictures.
+		  The content should be passed through with minimal scaling and picture
+		  enhancements.</entry>
+		</row>
+	        <row>
+	          <entry><constant>V4L2_DV_IT_CONTENT_TYPE_CINEMA</constant>&nbsp;</entry>
+		  <entry>Cinema content.</entry>
+		</row>
+	        <row>
+	          <entry><constant>V4L2_DV_IT_CONTENT_TYPE_GAME</constant>&nbsp;</entry>
+		  <entry>Game content. Audio and video latency should be minimized.</entry>
+		</row>
+	        <row>
+	          <entry><constant>V4L2_DV_IT_CONTENT_TYPE_NO_ITC</constant>&nbsp;</entry>
+		  <entry>No IT Content information is available and the ITC bit in the AVI
+		  InfoFrame is set to 0.</entry>
+		</row>
+	      </tbody>
+	    </entrytbl>
+	  </row>
 	  <row>
 	    <entry spanname="id"><constant>V4L2_CID_DV_RX_POWER_PRESENT</constant></entry>
 	    <entry>bitmask</entry>
@@ -5098,6 +5146,16 @@ interface and may change in the future.</para>
 	    This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors.
 	    </entry>
 	  </row>
+	  <row>
+	    <entry spanname="id"><constant>V4L2_CID_DV_RX_IT_CONTENT_TYPE</constant></entry>
+	    <entry>enum v4l2_dv_it_content_type</entry>
+	  </row>
+	  <row><entry spanname="descr">Reads the IT Content Type
+	    of the received video. This information is sent over HDMI and DisplayPort connectors
+	    as part of the AVI InfoFrame. The term 'IT Content' is used for content that originates
+	    from a computer as opposed to content from a TV broadcast or an analog source. See
+	    <constant>V4L2_CID_DV_TX_IT_CONTENT_TYPE</constant> for the available content types.</entry>
+	  </row>
 	  <row><entry></entry></row>
 	</tbody>
       </tgroup>

Documentation/DocBook/media/v4l/media-ioc-g-topology.xml

@@ -48,9 +48,6 @@
 
   <refsect1>
     <title>Description</title>
-
-    <para><emphasis role="bold">NOTE:</emphasis> This new ioctl is programmed to be added on Kernel 4.6. Its definition/arguments may change until its final version.</para>
-
     <para>The typical usage of this ioctl is to call it twice.
     On the first call, the structure defined at &media-v2-topology; should
     be zeroed. At return, if no errors happen, this ioctl will return the

Documentation/DocBook/media/v4l/media-types.xml

@@ -56,10 +56,6 @@
 	    <entry><constant>MEDIA_ENT_F_CONN_COMPOSITE</constant></entry>
 	    <entry>Connector for a RGB composite signal.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>MEDIA_ENT_F_CONN_TEST</constant></entry>
-	    <entry>Connector for a test generator.</entry>
-	  </row>
 	  <row>
 	    <entry><constant>MEDIA_ENT_F_CAM_SENSOR</constant></entry>
 	    <entry>Camera video sensor entity.</entry>
@@ -84,7 +80,34 @@
 	  </row>
 	  <row>
 	    <entry><constant>MEDIA_ENT_F_TUNER</constant></entry>
-	    <entry>Digital TV, analog TV, radio and/or software radio tuner.</entry>
+	    <entry>Digital TV, analog TV, radio and/or software radio tuner,
+		   with consists on a PLL tuning stage that converts radio
+		   frequency (RF) signal into an Intermediate Frequency (IF).
+		   Modern tuners have internally IF-PLL decoders for audio
+		   and video, but older models have those stages implemented
+		   on separate entities.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_IF_VID_DECODER</constant></entry>
+	    <entry>IF-PLL video decoder. It receives the IF from a PLL
+		   and decodes the analog TV video signal. This is commonly
+		   found on some very old analog tuners, like Philips MK3
+		   designs. They all contain a tda9887 (or some software
+		   compatible similar chip, like tda9885). Those devices
+		   use a different I2C address than the tuner PLL.
+	    </entry>
+	  </row>
+	  <row>
+	    <entry><constant>MEDIA_ENT_F_IF_AUD_DECODER</constant></entry>
+	    <entry>IF-PLL sound decoder. It receives the IF from a PLL
+		   and decodes the analog TV audio signal. This is commonly
+		   found on some very old analog hardware, like Micronas
+		   msp3400, Philips tda9840, tda985x, etc. Those devices
+		   use a different I2C address than the tuner PLL and
+		   should be controlled together with the IF-PLL video
+		   decoder.
+	    </entry>
 	  </row>
 	</tbody>
       </tgroup>

Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,35 +1,43 @@
-    <refentry id="V4L2-PIX-FMT-YUV420M">
+    <refentry>
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12'), V4L2_PIX_FMT_YVU420M ('YM21')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>
-	<refname> <constant>V4L2_PIX_FMT_YUV420M</constant></refname>
-	<refpurpose>Variation of <constant>V4L2_PIX_FMT_YUV420</constant>
-	  with planes non contiguous in memory. </refpurpose>
+	<refname id="V4L2-PIX-FMT-YUV420M"><constant>V4L2_PIX_FMT_YUV420M</constant></refname>
+	<refname id="V4L2-PIX-FMT-YVU420M"><constant>V4L2_PIX_FMT_YVU420M</constant></refname>
+	<refpurpose>Variation of <constant>V4L2_PIX_FMT_YUV420</constant> and
+	  <constant>V4L2_PIX_FMT_YVU420</constant> with planes non contiguous
+	  in memory.</refpurpose>
       </refnamediv>
 
       <refsect1>
 	<title>Description</title>
 
 	<para>This is a multi-planar format, as opposed to a packed format.
-The three components are separated into three sub- images or planes.
+The three components are separated into three sub-images or planes.</para>
 
-The Y plane is first. The Y plane has one byte per pixel. The Cb data
+	<para>The Y plane is first. The Y plane has one byte per pixel.
+For <constant>V4L2_PIX_FMT_YUV420M</constant> the Cb data
 constitutes the second plane which is half the width and half
 the height of the Y plane (and of the image). Each Cb belongs to four
 pixels, a two-by-two square of the image. For example,
 Cb<subscript>0</subscript> belongs to Y'<subscript>00</subscript>,
 Y'<subscript>01</subscript>, Y'<subscript>10</subscript>, and
 Y'<subscript>11</subscript>. The Cr data, just like the Cb plane, is
-in the third plane. </para>
+in the third plane.</para>
+
+	<para><constant>V4L2_PIX_FMT_YVU420M</constant> is the same except
+the Cr data is stored in the second plane and the Cb data in the third plane.
+</para>
 
 	<para>If the Y plane has pad bytes after each row, then the Cb
 and Cr planes have half as many pad bytes after their rows. In other
 words, two Cx rows (including padding) is exactly as long as one Y row
 (including padding).</para>
 
-	<para><constant>V4L2_PIX_FMT_YUV420M</constant> is intended to be
+	<para><constant>V4L2_PIX_FMT_YUV420M</constant> and
+<constant>V4L2_PIX_FMT_YVU420M</constant> are intended to be
 used only in drivers and applications that support the multi-planar API,
 described in <xref linkend="planar-apis"/>. </para>
 

Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml → Documentation/DocBook/media/v4l/pixfmt-yuv422m.xml

@@ -1,40 +1,45 @@
-    <refentry id="V4L2-PIX-FMT-YVU420M">
+    <refentry>
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YVU420M ('YM21')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV422M ('YM16'), V4L2_PIX_FMT_YVU422M ('YM61')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>
-	<refname> <constant>V4L2_PIX_FMT_YVU420M</constant></refname>
-	<refpurpose>Variation of <constant>V4L2_PIX_FMT_YVU420</constant>
-	  with planes non contiguous in memory. </refpurpose>
+	<refname id="V4L2-PIX-FMT-YUV422M"><constant>V4L2_PIX_FMT_YUV422M</constant></refname>
+	<refname id="V4L2-PIX-FMT-YVU422M"><constant>V4L2_PIX_FMT_YVU422M</constant></refname>
+	<refpurpose>Planar formats with &frac12; horizontal resolution, also
+	known as YUV and YVU 4:2:2</refpurpose>
       </refnamediv>
 
       <refsect1>
 	<title>Description</title>
 
 	<para>This is a multi-planar format, as opposed to a packed format.
-The three components are separated into three sub-images or planes.
+The three components are separated into three sub-images or planes.</para>
 
-The Y plane is first. The Y plane has one byte per pixel. The Cr data
-constitutes the second plane which is half the width and half
-the height of the Y plane (and of the image). Each Cr belongs to four
-pixels, a two-by-two square of the image. For example,
-Cr<subscript>0</subscript> belongs to Y'<subscript>00</subscript>,
-Y'<subscript>01</subscript>, Y'<subscript>10</subscript>, and
-Y'<subscript>11</subscript>. The Cb data, just like the Cr plane, constitutes
-the third plane. </para>
+	<para>The Y plane is first. The Y plane has one byte per pixel.
+For <constant>V4L2_PIX_FMT_YUV422M</constant> the Cb data
+constitutes the second plane which is half the width of the Y plane (and of the
+image). Each Cb belongs to two pixels. For example,
+Cb<subscript>0</subscript> belongs to Y'<subscript>00</subscript>,
+Y'<subscript>01</subscript>. The Cr data, just like the Cb plane, is
+in the third plane. </para>
 
-	<para>If the Y plane has pad bytes after each row, then the Cr
-and Cb planes have half as many pad bytes after their rows. In other
+	<para><constant>V4L2_PIX_FMT_YVU422M</constant> is the same except
+the Cr data is stored in the second plane and the Cb data in the third plane.
+</para>
+
+	<para>If the Y plane has pad bytes after each row, then the Cb
+and Cr planes have half as many pad bytes after their rows. In other
 words, two Cx rows (including padding) is exactly as long as one Y row
 (including padding).</para>
 
-	<para><constant>V4L2_PIX_FMT_YVU420M</constant> is intended to be
+	<para><constant>V4L2_PIX_FMT_YUV422M</constant> and
+<constant>V4L2_PIX_FMT_YVU422M</constant> are intended to be
 used only in drivers and applications that support the multi-planar API,
 described in <xref linkend="planar-apis"/>. </para>
 
 	<example>
-	  <title><constant>V4L2_PIX_FMT_YVU420M</constant> 4 &times; 4
+	  <title><constant>V4L2_PIX_FMT_YUV422M</constant> 4 &times; 4
 pixel image</title>
 
 	  <formalpara>
@@ -75,24 +80,44 @@ pixel image</title>
 		    <row><entry></entry></row>
 		    <row>
 		      <entry>start1&nbsp;+&nbsp;0:</entry>
-		      <entry>Cr<subscript>00</subscript></entry>
-		      <entry>Cr<subscript>01</subscript></entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
 		    </row>
 		    <row>
 		      <entry>start1&nbsp;+&nbsp;2:</entry>
-		      <entry>Cr<subscript>10</subscript></entry>
-		      <entry>Cr<subscript>11</subscript></entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;6:</entry>
+		      <entry>Cb<subscript>30</subscript></entry>
+		      <entry>Cb<subscript>31</subscript></entry>
 		    </row>
 		    <row><entry></entry></row>
 		    <row>
 		      <entry>start2&nbsp;+&nbsp;0:</entry>
-		      <entry>Cb<subscript>00</subscript></entry>
-		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
 		    </row>
 		    <row>
 		      <entry>start2&nbsp;+&nbsp;2:</entry>
-		      <entry>Cb<subscript>10</subscript></entry>
-		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;4:</entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>21</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;6:</entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>31</subscript></entry>
 		    </row>
 		  </tbody>
 		</tgroup>
@@ -113,36 +138,23 @@ pixel image</title>
 		    </row>
 		    <row>
 		      <entry>0</entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry>
-		    </row>
-		    <row>
-		      <entry></entry>
-		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
-		      <entry></entry><entry>C</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry>
 		    </row>
 		    <row>
 		      <entry>1</entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry>
-		    </row>
-		    <row>
-		      <entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry>
 		    </row>
 		    <row>
 		      <entry>2</entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry>
-		    </row>
-		    <row>
-		      <entry></entry>
-		      <entry></entry><entry>C</entry><entry></entry><entry></entry>
-		      <entry></entry><entry>C</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry>
 		    </row>
 		    <row>
 		      <entry>3</entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry><entry></entry>
-		      <entry>Y</entry><entry></entry><entry>Y</entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry><entry></entry>
+		      <entry>Y</entry><entry>C</entry><entry>Y</entry>
 		    </row>
 		  </tbody>
 		</tgroup>

Documentation/DocBook/media/v4l/pixfmt-yuv444m.xml

@@ -0,0 +1,177 @@
+    <refentry>
+      <refmeta>
+	<refentrytitle>V4L2_PIX_FMT_YUV444M ('YM24'), V4L2_PIX_FMT_YVU444M ('YM42')</refentrytitle>
+	&manvol;
+      </refmeta>
+      <refnamediv>
+	<refname id="V4L2-PIX-FMT-YUV444M"><constant>V4L2_PIX_FMT_YUV444M</constant></refname>
+	<refname id="V4L2-PIX-FMT-YVU444M"><constant>V4L2_PIX_FMT_YVU444M</constant></refname>
+	<refpurpose>Planar formats with full horizontal resolution, also
+	known as YUV and YVU 4:4:4</refpurpose>
+      </refnamediv>
+
+      <refsect1>
+	<title>Description</title>
+
+	<para>This is a multi-planar format, as opposed to a packed format.
+The three components are separated into three sub-images or planes.</para>
+
+	<para>The Y plane is first. The Y plane has one byte per pixel.
+For <constant>V4L2_PIX_FMT_YUV444M</constant> the Cb data
+constitutes the second plane which is the same width and height as the Y plane
+(and as the image). The Cr data, just like the Cb plane, is in the third plane.
+</para>
+
+	<para><constant>V4L2_PIX_FMT_YVU444M</constant> is the same except
+the Cr data is stored in the second plane and the Cb data in the third plane.
+</para>
+	<para>If the Y plane has pad bytes after each row, then the Cb
+and Cr planes have the same number of pad bytes after their rows.</para>
+
+	<para><constant>V4L2_PIX_FMT_YUV444M</constant> and
+<constant>V4L2_PIX_FMT_YUV444M</constant> are intended to be
+used only in drivers and applications that support the multi-planar API,
+described in <xref linkend="planar-apis"/>. </para>
+
+	<example>
+	  <title><constant>V4L2_PIX_FMT_YUV444M</constant> 4 &times; 4
+pixel image</title>
+
+	  <formalpara>
+	    <title>Byte Order.</title>
+	    <para>Each cell is one byte.
+		<informaltable frame="none">
+		<tgroup cols="5" align="center">
+		  <colspec align="left" colwidth="2*" />
+		  <tbody valign="top">
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;0:</entry>
+		      <entry>Y'<subscript>00</subscript></entry>
+		      <entry>Y'<subscript>01</subscript></entry>
+		      <entry>Y'<subscript>02</subscript></entry>
+		      <entry>Y'<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;4:</entry>
+		      <entry>Y'<subscript>10</subscript></entry>
+		      <entry>Y'<subscript>11</subscript></entry>
+		      <entry>Y'<subscript>12</subscript></entry>
+		      <entry>Y'<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;8:</entry>
+		      <entry>Y'<subscript>20</subscript></entry>
+		      <entry>Y'<subscript>21</subscript></entry>
+		      <entry>Y'<subscript>22</subscript></entry>
+		      <entry>Y'<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start0&nbsp;+&nbsp;12:</entry>
+		      <entry>Y'<subscript>30</subscript></entry>
+		      <entry>Y'<subscript>31</subscript></entry>
+		      <entry>Y'<subscript>32</subscript></entry>
+		      <entry>Y'<subscript>33</subscript></entry>
+		    </row>
+		    <row><entry></entry></row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;0:</entry>
+		      <entry>Cb<subscript>00</subscript></entry>
+		      <entry>Cb<subscript>01</subscript></entry>
+		      <entry>Cb<subscript>02</subscript></entry>
+		      <entry>Cb<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;4:</entry>
+		      <entry>Cb<subscript>10</subscript></entry>
+		      <entry>Cb<subscript>11</subscript></entry>
+		      <entry>Cb<subscript>12</subscript></entry>
+		      <entry>Cb<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;8:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		      <entry>Cb<subscript>22</subscript></entry>
+		      <entry>Cb<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start1&nbsp;+&nbsp;12:</entry>
+		      <entry>Cb<subscript>20</subscript></entry>
+		      <entry>Cb<subscript>21</subscript></entry>
+		      <entry>Cb<subscript>32</subscript></entry>
+		      <entry>Cb<subscript>33</subscript></entry>
+		    </row>
+		    <row><entry></entry></row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;0:</entry>
+		      <entry>Cr<subscript>00</subscript></entry>
+		      <entry>Cr<subscript>01</subscript></entry>
+		      <entry>Cr<subscript>02</subscript></entry>
+		      <entry>Cr<subscript>03</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;4:</entry>
+		      <entry>Cr<subscript>10</subscript></entry>
+		      <entry>Cr<subscript>11</subscript></entry>
+		      <entry>Cr<subscript>12</subscript></entry>
+		      <entry>Cr<subscript>13</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;8:</entry>
+		      <entry>Cr<subscript>20</subscript></entry>
+		      <entry>Cr<subscript>21</subscript></entry>
+		      <entry>Cr<subscript>22</subscript></entry>
+		      <entry>Cr<subscript>23</subscript></entry>
+		    </row>
+		    <row>
+		      <entry>start2&nbsp;+&nbsp;12:</entry>
+		      <entry>Cr<subscript>30</subscript></entry>
+		      <entry>Cr<subscript>31</subscript></entry>
+		      <entry>Cr<subscript>32</subscript></entry>
+		      <entry>Cr<subscript>33</subscript></entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+
+	  <formalpara>
+	    <title>Color Sample Location.</title>
+	    <para>
+		<informaltable frame="none">
+		<tgroup cols="7" align="center">
+		  <tbody valign="top">
+		    <row>
+		      <entry></entry>
+		      <entry>0</entry><entry></entry><entry>1</entry><entry></entry>
+		      <entry>2</entry><entry></entry><entry>3</entry>
+		    </row>
+		    <row>
+		      <entry>0</entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry><entry></entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry>
+		    </row>
+		    <row>
+		      <entry>1</entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry><entry></entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry>
+		    </row>
+		    <row>
+		      <entry>2</entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry><entry></entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry>
+		    </row>
+		    <row>
+		      <entry>3</entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry><entry></entry>
+		      <entry>YC</entry><entry></entry><entry>YC</entry>
+		    </row>
+		  </tbody>
+		</tgroup>
+		</informaltable>
+	      </para>
+	  </formalpara>
+	</example>
+      </refsect1>
+    </refentry>

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -1628,7 +1628,8 @@ information.</para>
     &sub-y41p;
     &sub-yuv420;
     &sub-yuv420m;
-    &sub-yvu420m;
+    &sub-yuv422m;
+    &sub-yuv444m;
     &sub-yuv410;
     &sub-yuv422p;
     &sub-yuv411p;

Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml

@@ -60,9 +60,19 @@ input</refpurpose>
 automatically, similar to sensing the video standard. To do so, applications
 call <constant>VIDIOC_QUERY_DV_TIMINGS</constant> with a pointer to a
 &v4l2-dv-timings;. Once the hardware detects the timings, it will fill in the
-timings structure.
+timings structure.</para>
 
-If the timings could not be detected because there was no signal, then
+<para>Please note that drivers shall <emphasis>not</emphasis> switch timings automatically
+if new timings are detected. Instead, drivers should send the
+<constant>V4L2_EVENT_SOURCE_CHANGE</constant> event (if they support this) and expect
+that userspace will take action by calling <constant>VIDIOC_QUERY_DV_TIMINGS</constant>.
+The reason is that new timings usually mean different buffer sizes as well, and you
+cannot change buffer sizes on the fly. In general, applications that receive the
+Source Change event will have to call <constant>VIDIOC_QUERY_DV_TIMINGS</constant>,
+and if the detected timings are valid they will have to stop streaming, set the new
+timings, allocate new buffers and start streaming again.</para>
+
+<para>If the timings could not be detected because there was no signal, then
 <errorcode>ENOLINK</errorcode> is returned. If a signal was detected, but
 it was unstable and the receiver could not lock to the signal, then
 <errorcode>ENOLCK</errorcode> is returned. If the receiver could lock to the signal,

Documentation/DocBook/media/v4l/vidioc-querystd.xml

@@ -59,6 +59,16 @@ then the driver will return V4L2_STD_UNKNOWN. When detection is not
 possible or fails, the set must contain all standards supported by the
 current video input or output.</para>
 
+<para>Please note that drivers shall <emphasis>not</emphasis> switch the video standard
+automatically if a new video standard is detected. Instead, drivers should send the
+<constant>V4L2_EVENT_SOURCE_CHANGE</constant> event (if they support this) and expect
+that userspace will take action by calling <constant>VIDIOC_QUERYSTD</constant>.
+The reason is that a new video standard can mean different buffer sizes as well, and you
+cannot change buffer sizes on the fly. In general, applications that receive the
+Source Change event will have to call <constant>VIDIOC_QUERYSTD</constant>,
+and if the detected video standard is valid they will have to stop streaming, set the new
+standard, allocate new buffers and start streaming again.</para>
+
   </refsect1>
 
   <refsect1>

Documentation/cgroup-v2.txt

@@ -7,7 +7,7 @@ This is the authoritative documentation on the design, interface and
 conventions of cgroup v2.  It describes all userland-visible aspects
 of cgroup including core and specific controller behaviors.  All
 future changes must be reflected in this document.  Documentation for
-v1 is available under Documentation/cgroup-legacy/.
+v1 is available under Documentation/cgroup-v1/.
 
 CONTENTS
 

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -23,6 +23,7 @@ Optional properties:
   during suspend.
 - ti,no-reset-on-init: When present, the module should not be reset at init
 - ti,no-idle-on-init: When present, the module should not be idled at init
+- ti,no-idle: When present, the module is never allowed to idle.
 
 Example:
 

Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt

@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 

Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt

@@ -35,6 +35,12 @@ Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for V3D:
+- compatible:	Should be "brcm,bcm2835-v3d"
+- reg:		Physical base address and length of the V3D's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -60,6 +66,12 @@ hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+v3d: v3d@7ec00000 {
+	compatible = "brcm,bcm2835-v3d";
+	reg = <0x7ec00000 0x1000>;
+	interrupts = <1 10>;
+};
+
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };

Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt

@@ -6,6 +6,7 @@ Required properties:
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
 		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt

Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt

@@ -12,7 +12,8 @@ Required properties:
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
 		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
-		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
+		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 
 - reg: physical base address and length of the FIMD registers set.
 

Documentation/devicetree/bindings/display/msm/dsi.txt

@@ -44,9 +44,34 @@ Optional properties:
 - pinctrl-names: the pin control state names; should contain "default"
 - pinctrl-0: the default pinctrl state (active)
 - pinctrl-n: the "sleep" pinctrl state
-- port: DSI controller output port. This contains one endpoint subnode, with its
-  remote-endpoint set to the phandle of the connected panel's endpoint.
-  See Documentation/devicetree/bindings/graph.txt for device graph info.
+- port: DSI controller output port, containing one endpoint subnode.
+
+  DSI Endpoint properties:
+  - remote-endpoint: set to phandle of the connected panel's endpoint.
+    See Documentation/devicetree/bindings/graph.txt for device graph info.
+  - qcom,data-lane-map: this describes how the logical DSI lanes are mapped
+    to the physical lanes on the given platform. The value contained in
+    index n describes what logical data lane is mapped to the physical data
+    lane n (DATAn, where n lies between 0 and 3).
+
+    For example:
+
+    qcom,data-lane-map = <3 0 1 2>;
+
+    The above mapping describes that the logical data lane DATA3 is mapped to
+    the physical data lane DATA0, logical DATA0 to physical DATA1, logic DATA1
+    to phys DATA2 and logic DATA2 to phys DATA3.
+
+    There are only a limited number of physical to logical mappings possible:
+
+    "0123": Logic 0->Phys 0; Logic 1->Phys 1; Logic 2->Phys 2; Logic 3->Phys 3;
+    "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3;
+    "2301": Logic 2->Phys 0; Logic 3->Phys 1; Logic 0->Phys 2; Logic 1->Phys 3;
+    "1230": Logic 1->Phys 0; Logic 2->Phys 1; Logic 3->Phys 2; Logic 0->Phys 3;
+    "0321": Logic 0->Phys 0; Logic 3->Phys 1; Logic 2->Phys 2; Logic 1->Phys 3;
+    "1032": Logic 1->Phys 0; Logic 0->Phys 1; Logic 3->Phys 2; Logic 2->Phys 3;
+    "2103": Logic 2->Phys 0; Logic 1->Phys 1; Logic 0->Phys 2; Logic 3->Phys 3;
+    "3210": Logic 3->Phys 0; Logic 2->Phys 1; Logic 1->Phys 2; Logic 0->Phys 3;
 
 DSI PHY:
 Required properties:
@@ -131,6 +156,7 @@ Example:
 		port {
 			dsi0_out: endpoint {
 				remote-endpoint = <&panel_in>;
+				lanes = <0 1 2 3>;
 			};
 		};
 	};

Documentation/devicetree/bindings/display/msm/hdmi.txt

@@ -11,6 +11,7 @@ Required properties:
 - reg: Physical base address and length of the controller's registers
 - reg-names: "core_physical"
 - interrupts: The interrupt signal from the hdmi block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
 - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
@@ -18,6 +19,8 @@ Required properties:
 - qcom,hdmi-tx-hpd-gpio: hpd pin
 - core-vdda-supply: phandle to supply regulator
 - hdmi-mux-supply: phandle to mux regulator
+- phys: the phandle for the HDMI PHY device
+- phy-names: the name of the corresponding PHY device
 
 Optional properties:
 - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
@@ -27,15 +30,38 @@ Optional properties:
 - pinctrl-0: the default pinctrl state (active)
 - pinctrl-1: the "sleep" pinctrl state
 
+HDMI PHY:
+Required properties:
+- compatible: Could be the following
+  * "qcom,hdmi-phy-8660"
+  * "qcom,hdmi-phy-8960"
+  * "qcom,hdmi-phy-8974"
+  * "qcom,hdmi-phy-8084"
+  * "qcom,hdmi-phy-8996"
+- #phy-cells: Number of cells in a PHY specifier; Should be 0.
+- reg: Physical base address and length of the registers of the PHY sub blocks.
+- reg-names: The names of register regions. The following regions are required:
+  * "hdmi_phy"
+  * "hdmi_pll"
+  For HDMI PHY on msm8996, these additional register regions are required:
+    * "hdmi_tx_l0"
+    * "hdmi_tx_l1"
+    * "hdmi_tx_l3"
+    * "hdmi_tx_l4"
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- core-vdda-supply: phandle to vdda regulator device node
+
 Example:
 
 / {
 	...
 
-	hdmi: qcom,hdmi-tx-8960@4a00000 {
+	hdmi: hdmi@4a00000 {
 		compatible = "qcom,hdmi-tx-8960";
 		reg-names = "core_physical";
-		reg = <0x04a00000 0x1000>;
+		reg = <0x04a00000 0x2f0>;
 		interrupts = <GIC_SPI 79 0>;
 		power-domains = <&mmcc MDSS_GDSC>;
 		clock-names =
@@ -54,5 +80,21 @@ Example:
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
 		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi_phy";
+	};
+
+	hdmi_phy: phy@4a00400 {
+		compatible = "qcom,hdmi-phy-8960";
+		reg-names = "hdmi_phy",
+			    "hdmi_pll";
+		reg = <0x4a00400 0x60>,
+		      <0x4a00500 0x100>;
+		#phy-cells = <0>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names = "slave_iface_clk";
+		clocks = <&mmcc HDMI_S_AHB_CLK>;
+		core-vdda-supply = <&pm8921_hdmi_mvs>;
 	};
 };

Documentation/devicetree/bindings/display/renesas,du.txt

@@ -8,6 +8,7 @@ Required Properties:
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
     - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU
     - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
+    - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
 
   - reg: A list of base address and length of each memory resource, one for
     each entry in the reg-names property.
@@ -24,7 +25,7 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - R8A779[0134] use one functional clock per channel and one clock per LVDS
+    - R8A779[01345] use one functional clock per channel and one clock per LVDS
       encoder (if available). The functional clocks must be named "du.x" with
       "x" being the channel numerical index. The LVDS clocks must be named
       "lvds.x" with "x" being the LVDS encoder numerical index.
@@ -41,13 +42,14 @@ bindings specified in Documentation/devicetree/bindings/graph.txt.
 The following table lists for each supported model the port number
 corresponding to each DU output.
 
-		Port 0		Port1		Port2
+		Port 0		Port1		Port2		Port3
 -----------------------------------------------------------------------------
- R8A7779 (H1)	DPAD 0		DPAD 1		-
- R8A7790 (H2)	DPAD		LVDS 0		LVDS 1
- R8A7791 (M2-W)	DPAD		LVDS 0		-
- R8A7793 (M2-N)	DPAD		LVDS 0		-
- R8A7794 (E2)	DPAD 0		DPAD 1		-
+ R8A7779 (H1)	DPAD 0		DPAD 1		-		-
+ R8A7790 (H2)	DPAD		LVDS 0		LVDS 1		-
+ R8A7791 (M2-W)	DPAD		LVDS 0		-		-
+ R8A7793 (M2-N)	DPAD		LVDS 0		-		-
+ R8A7794 (E2)	DPAD 0		DPAD 1		-		-
+ R8A7795 (H3)	DPAD		HDMI 0		HDMI 1		LVDS
 
 
 Example: R8A7790 (R-Car H2) DU

Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt

@@ -0,0 +1,50 @@
+Rockchip specific extensions to the Innosilicon HDMI
+================================
+
+Required properties:
+- compatible:
+	"rockchip,rk3036-inno-hdmi";
+- reg:
+	Physical base address and length of the controller's registers.
+- clocks, clock-names:
+	Phandle to hdmi controller clock, name should be "pclk"
+- interrupts:
+	HDMI interrupt number
+- ports:
+	Contain one port node with endpoint definitions as defined in
+	Documentation/devicetree/bindings/graph.txt.
+- pinctrl-0, pinctrl-name:
+	Switch the iomux of HPD/CEC pins to HDMI function.
+
+Example:
+hdmi: hdmi@20034000 {
+	compatible = "rockchip,rk3036-inno-hdmi";
+	reg = <0x20034000 0x4000>;
+	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI>;
+	clock-names = "pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ctl>;
+	status = "disabled";
+
+	hdmi_in: port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		hdmi_in_lcdc: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&lcdc_out_hdmi>;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		hdmi_ctl: hdmi-ctl {
+			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
+					<1 9  RK_FUNC_1 &pcfg_pull_none>,
+					<1 10 RK_FUNC_1 &pcfg_pull_none>,
+					<1 11 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+
+};

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt

@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:

Documentation/devicetree/bindings/media/i2c/mt9v032.txt

@@ -20,6 +20,8 @@ Optional Properties:
 
 - link-frequencies: List of allowed link frequencies in Hz. Each frequency is
 	expressed as a 64-bit big-endian integer.
+- reset-gpios: GPIO handle which is connected to the reset pin of the chip.
+- standby-gpios: GPIO handle which is connected to the standby pin of the chip.
 
 For further reading on port node refer to
 Documentation/devicetree/bindings/media/video-interfaces.txt.

Documentation/devicetree/bindings/media/i2c/tvp5150.txt

@@ -0,0 +1,88 @@
+* Texas Instruments TVP5150 and TVP5151 video decoders
+
+The TVP5150 and TVP5151 are video decoders that convert baseband NTSC and PAL
+(and also SECAM in the TVP5151 case) video signals to either 8-bit 4:2:2 YUV
+with discrete syncs or 8-bit ITU-R BT.656 with embedded syncs output formats.
+
+Required Properties:
+- compatible: value must be "ti,tvp5150"
+- reg: I2C slave address
+
+Optional Properties:
+- pdn-gpios: phandle for the GPIO connected to the PDN pin, if any.
+- reset-gpios: phandle for the GPIO connected to the RESETB pin, if any.
+
+Optional nodes:
+- connectors: The input connectors of tvp5150 have to be defined under
+  a subnode name "connectors" using the following format:
+
+	input-connector-name {
+		input connector properties
+	};
+
+Each input connector must contain the following properties:
+
+	- label: a name for the connector.
+	- input: the input connector.
+
+The possible values for the "input" property are:
+	0: Composite0
+	1: Composite1
+	2: S-Video
+
+and on a tvp5150am1 and tvp5151 there is another:
+	4: Signal generator
+
+The list of valid input connectors are defined in dt-bindings/media/tvp5150.h
+header file and can be included by device tree source files.
+
+Each input connector can be defined only once.
+
+The device node must contain one 'port' child node for its digital output
+video port, in accordance with the video interface bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Required Endpoint Properties for parallel synchronization:
+
+- hsync-active: active state of the HSYNC signal. Must be <1> (HIGH).
+- vsync-active: active state of the VSYNC signal. Must be <1> (HIGH).
+- field-even-active: field signal level during the even field data
+  transmission. Must be <0>.
+
+If none of hsync-active, vsync-active and field-even-active is specified,
+the endpoint is assumed to use embedded BT.656 synchronization.
+
+Example:
+
+&i2c2 {
+	...
+	tvp5150@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		pdn-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+
+		connectors {
+			composite0 {
+				label = "Composite0";
+				input = <TVP5150_COMPOSITE0>;
+			};
+
+			composite1 {
+				label = "Composite1";
+				input = <TVP5150_COMPOSITE1>;
+			};
+
+			s-video {
+				label = "S-Video";
+				input = <TVP5150_SVIDEO>;
+			};
+		};
+
+		port {
+			tvp5150_1: endpoint {
+				remote-endpoint = <&ccdc_ep>;
+			};
+		};
+	};
+};

Documentation/devicetree/bindings/media/rcar_vin.txt

@@ -6,6 +6,7 @@ family of devices. The current blocks are always slaves and suppot one input
 channel which can be either RGB, YUYV or BT656.
 
  - compatible: Must be one of the following
+   - "renesas,vin-r8a7795" for the R8A7795 device
    - "renesas,vin-r8a7794" for the R8A7794 device
    - "renesas,vin-r8a7793" for the R8A7793 device
    - "renesas,vin-r8a7791" for the R8A7791 device

Documentation/devicetree/bindings/media/renesas,jpu.txt

@@ -5,11 +5,12 @@ and decoding function conforming to the JPEG baseline process, so that the JPU
 can encode image data and decode JPEG data quickly.
 
 Required properties:
-  - compatible: should containg one of the following:
-			- "renesas,jpu-r8a7790" for R-Car H2
-			- "renesas,jpu-r8a7791" for R-Car M2-W
-			- "renesas,jpu-r8a7792" for R-Car V2H
-			- "renesas,jpu-r8a7793" for R-Car M2-N
+- compatible: "renesas,jpu-<soctype>", "renesas,rcar-gen2-jpu" as fallback.
+	Examples with soctypes are:
+	  - "renesas,jpu-r8a7790" for R-Car H2
+	  - "renesas,jpu-r8a7791" for R-Car M2-W
+	  - "renesas,jpu-r8a7792" for R-Car V2H
+	  - "renesas,jpu-r8a7793" for R-Car M2-N
 
   - reg: Base address and length of the registers block for the JPU.
   - interrupts: JPU interrupt specifier.
@@ -17,7 +18,7 @@ Required properties:
 
 Example: R8A7790 (R-Car H2) JPU node
 	jpeg-codec@fe980000 {
-		compatible = "renesas,jpu-r8a7790";
+		compatible = "renesas,jpu-r8a7790", "renesas,rcar-gen2-jpu";
 		reg = <0 0xfe980000 0 0x10300>;
 		interrupts = <0 272 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_JPU>;

Documentation/devicetree/bindings/media/renesas,vsp1.txt

@@ -1,30 +1,18 @@
-* Renesas VSP1 Video Processing Engine
+* Renesas VSP Video Processing Engine
 
-The VSP1 is a video processing engine that supports up-/down-scaling, alpha
+The VSP is a video processing engine that supports up-/down-scaling, alpha
 blending, color space conversion and various other image processing features.
 It can be found in the Renesas R-Car second generation SoCs.
 
 Required properties:
 
-  - compatible: Must contain "renesas,vsp1"
+  - compatible: Must contain one of the following values
+    - "renesas,vsp1" for the R-Car Gen2 VSP1
+    - "renesas,vsp2" for the R-Car Gen3 VSP2
 
-  - reg: Base address and length of the registers block for the VSP1.
-  - interrupts: VSP1 interrupt specifier.
-  - clocks: A phandle + clock-specifier pair for the VSP1 functional clock.
-
-  - renesas,#rpf: Number of Read Pixel Formatter (RPF) modules in the VSP1.
-  - renesas,#uds: Number of Up Down Scaler (UDS) modules in the VSP1.
-  - renesas,#wpf: Number of Write Pixel Formatter (WPF) modules in the VSP1.
-
-
-Optional properties:
-
-  - renesas,has-lif: Boolean, indicates that the LCD Interface (LIF) module is
-    available.
-  - renesas,has-lut: Boolean, indicates that the Look Up Table (LUT) module is
-    available.
-  - renesas,has-sru: Boolean, indicates that the Super Resolution Unit (SRU)
-    module is available.
+  - reg: Base address and length of the registers block for the VSP.
+  - interrupts: VSP interrupt specifier.
+  - clocks: A phandle + clock-specifier pair for the VSP functional clock.
 
 
 Example: R8A7790 (R-Car H2) VSP1-S node
@@ -34,10 +22,4 @@ Example: R8A7790 (R-Car H2) VSP1-S node
 		reg = <0 0xfe928000 0 0x8000>;
 		interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
-
-		renesas,has-lut;
-		renesas,has-sru;
-		renesas,#rpf = <5>;
-		renesas,#uds = <3>;
-		renesas,#wpf = <4>;
 	};

Documentation/devicetree/bindings/media/ti-cal.txt

@@ -0,0 +1,72 @@
+Texas Instruments DRA72x CAMERA ADAPTATION LAYER (CAL)
+------------------------------------------------------
+
+The Camera Adaptation Layer (CAL) is a key component for image capture
+applications. The capture module provides the system interface and the
+processing capability to connect CSI2 image-sensor modules to the
+DRA72x device.
+
+Required properties:
+- compatible: must be "ti,dra72-cal"
+- reg:	CAL Top level, Receiver Core #0, Receiver Core #1 and Camera RX
+	control address space
+- reg-names: cal_top, cal_rx_core0, cal_rx_core1, and camerrx_control
+	     registers
+- interrupts: should contain IRQ line for the CAL;
+
+CAL supports 2 camera port nodes on MIPI bus. Each CSI2 camera port nodes
+should contain a 'port' child node with child 'endpoint' node. Please
+refer to the bindings defined in
+Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+Example:
+	cal: cal@4845b000 {
+		compatible = "ti,dra72-cal";
+		ti,hwmods = "cal";
+		reg = <0x4845B000 0x400>,
+		      <0x4845B800 0x40>,
+		      <0x4845B900 0x40>,
+		      <0x4A002e94 0x4>;
+		reg-names = "cal_top",
+			    "cal_rx_core0",
+			    "cal_rx_core1",
+			    "camerrx_control";
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			csi2_0: port@0 {
+				reg = <0>;
+				endpoint {
+					slave-mode;
+					remote-endpoint = <&ar0330_1>;
+				};
+			};
+			csi2_1: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
+	i2c5: i2c@4807c000 {
+		ar0330@10 {
+			compatible = "ti,ar0330";
+			reg = <0x10>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ar0330_1: endpoint {
+					reg = <0>;
+					clock-lanes = <1>;
+					data-lanes = <0 2 3 4>;
+					remote-endpoint = <&csi2_0>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 

Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt

@@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
 

Documentation/devicetree/bindings/pci/rcar-pci.txt

@@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 

Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -26,11 +26,7 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -38,7 +34,6 @@ Example:
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -46,7 +41,6 @@ Example:
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
@@ -54,7 +48,6 @@ Example:
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -62,7 +55,6 @@ Example:
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -70,7 +62,6 @@ Example:
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -78,7 +69,6 @@ Example:
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -14,6 +14,10 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
@@ -21,4 +25,6 @@ Example:
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.

Documentation/devicetree/bindings/sound/fsl-asoc-card.txt

@@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
  "fsl,imx-audio-sgtl5000"
  (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
 
+ "fsl,imx-audio-wm8960"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.

Documentation/devicetree/bindings/thermal/rcar-thermal.txt

@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};

Documentation/dma-buf-sharing.txt

@@ -350,7 +350,26 @@ Being able to mmap an export dma-buf buffer object has 2 main use-cases:
    handles, too). So it's beneficial to support this in a similar fashion on
    dma-buf to have a good transition path for existing Android userspace.
 
-   No special interfaces, userspace simply calls mmap on the dma-buf fd.
+   No special interfaces, userspace simply calls mmap on the dma-buf fd, making
+   sure that the cache synchronization ioctl (DMA_BUF_IOCTL_SYNC) is *always*
+   used when the access happens. This is discussed next paragraphs.
+
+   Some systems might need some sort of cache coherency management e.g. when
+   CPU and GPU domains are being accessed through dma-buf at the same time. To
+   circumvent this problem there are begin/end coherency markers, that forward
+   directly to existing dma-buf device drivers vfunc hooks. Userspace can make
+   use of those markers through the DMA_BUF_IOCTL_SYNC ioctl. The sequence
+   would be used like following:
+     - mmap dma-buf fd
+     - for each drawing/upload cycle in CPU 1. SYNC_START ioctl, 2. read/write
+       to mmap area 3. SYNC_END ioctl. This can be repeated as often as you
+       want (with the new data being consumed by the GPU or say scanout device)
+     - munmap once you don't need the buffer any more
+
+    Therefore, for correctness and optimal performance, systems with the memory
+    cache shared by the GPU and CPU i.e. the "coherent" and also the
+    "incoherent" are always required to use SYNC_START and SYNC_END before and
+    after, respectively, when accessing the mapped address.
 
 2. Supporting existing mmap interfaces in importers
 

Documentation/dvb/README.dvb-usb

@@ -190,7 +190,7 @@ and watch another one.
 Patches, comments and suggestions are very very welcome.
 
 3. Acknowledgements
-   Amaury Demol (ademol@dibcom.fr) and Francois Kanounnikoff from DiBcom for
+   Amaury Demol (Amaury.Demol@parrot.com) and Francois Kanounnikoff from DiBcom for
     providing specs, code and help, on which the dvb-dibusb, dib3000mb and
     dib3000mc are based.
 

Documentation/filesystems/efivarfs.txt

@@ -14,3 +14,10 @@ filesystem.
 efivarfs is typically mounted like this,
 
 	mount -t efivarfs none /sys/firmware/efi/efivars
+
+Due to the presence of numerous firmware bugs where removing non-standard
+UEFI variables causes the system firmware to fail to POST, efivarfs
+files that are not well-known standardized variables are created
+as immutable files.  This doesn't prevent removal - "chattr -i" will work -
+but it does prevent this kind of failure from being accomplished
+accidentally.

Documentation/kernel-parameters.txt

@@ -4235,6 +4235,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			The default value of this parameter is determined by
 			the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
 
+	workqueue.debug_force_rr_cpu
+			Workqueue used to implicitly guarantee that work
+			items queued without explicit CPU specified are put
+			on the local CPU.  This guarantee is no longer true
+			and while local CPU is still preferred work items
+			may be put on foreign CPUs.  This debug option
+			forces round-robin CPU selection to flush out
+			usages which depend on the now broken guarantee.
+			When enabled, memory and cache locality will be
+			impacted.
+
 	x2apic_phys	[X86-64,APIC] Use x2apic physical mode instead of
 			default x2apic cluster mode on platforms
 			supporting x2apic.

Documentation/timers/hpet.txt

@@ -1,9 +1,7 @@
 		High Precision Event Timer Driver for Linux
 
 The High Precision Event Timer (HPET) hardware follows a specification
-by Intel and Microsoft which can be found at
-
-	http://www.intel.com/hardwaredesign/hpetspec_1.pdf
+by Intel and Microsoft, revision 1.
 
 Each HPET has one fixed-rate counter (at 10+ MHz, hence "High Precision")
 and up to 32 comparators.  Normally three or more comparators are provided,

Documentation/video4linux/v4l2-controls.txt

@@ -647,7 +647,6 @@ Or you can add specific controls to a handler:
 	volume = v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_AUDIO_VOLUME, ...);
 	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_BRIGHTNESS, ...);
 	v4l2_ctrl_new_std(&video_ctrl_handler, &ops, V4L2_CID_CONTRAST, ...);
-	v4l2_ctrl_add_ctrl(&radio_ctrl_handler, volume);
 
 What you should not do is make two identical controls for two handlers.
 For example:

Documentation/virtual/kvm/mmu.txt

@@ -358,7 +358,8 @@ In the first case there are two additional complications:
 - if CR4.SMEP is enabled: since we've turned the page into a kernel page,
   the kernel may now execute it.  We handle this by also setting spte.nx.
   If we get a user fetch or read fault, we'll change spte.u=1 and
-  spte.nx=gpte.nx back.
+  spte.nx=gpte.nx back.  For this to work, KVM forces EFER.NX to 1 when
+  shadow paging is in use.
 - if CR4.SMAP is disabled: since the page has been changed to a kernel
   page, it can not be reused when CR4.SMAP is enabled. We set
   CR4.SMAP && !CR0.WP into shadow page's role to avoid this case. Note,

Documentation/watchdog/watchdog-parameters.txt

@@ -400,3 +400,7 @@ wm8350_wdt:
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------
+sun4v_wdt:
+timeout_ms: Watchdog timeout in milliseconds 1..180000, default=60000)
+nowayout: Watchdog cannot be stopped once started
+-------------------------------------------------

MAINTAINERS

@@ -827,6 +827,12 @@ S:	Maintained
 F:	drivers/net/arcnet/
 F:	include/uapi/linux/if_arcnet.h
 
+ARM HDLCD DRM DRIVER
+M:	Liviu Dudau <liviu.dudau@arm.com>
+S:	Supported
+F:	drivers/gpu/drm/arm/
+F:	Documentation/devicetree/bindings/display/arm,hdlcd.txt
+
 ARM MFM AND FLOPPY DRIVERS
 M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
@@ -920,17 +926,24 @@ M:	Emilio López <emilio@elopez.com.ar>
 S:	Maintained
 F:	drivers/clk/sunxi/
 
-ARM/Amlogic MesonX SoC support
+ARM/Amlogic Meson SoC support
 M:	Carlo Caione <carlo@caione.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L:	linux-meson@googlegroups.com
+W:	http://linux-meson.com/
 S:	Maintained
-F:	drivers/media/rc/meson-ir.c
-N:	meson[x68]
+F:	arch/arm/mach-meson/
+F:	arch/arm/boot/dts/meson*
+N:	meson
 
 ARM/Annapurna Labs ALPINE ARCHITECTURE
 M:	Tsahee Zidenberg <tsahee@annapurnalabs.com>
+M:	Antoine Tenart <antoine.tenart@free-electrons.com>
 S:	Maintained
 F:	arch/arm/mach-alpine/
+F:	arch/arm/boot/dts/alpine*
+F:	arch/arm64/boot/dts/al/
+F:	drivers/*/*alpine*
 
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@atmel.com>
@@ -1442,8 +1455,8 @@ S:	Maintained
 ARM/RENESAS ARM64 ARCHITECTURE
 M:	Simon Horman <horms@verge.net.au>
 M:	Magnus Damm <magnus.damm@gmail.com>
-L:	linux-sh@vger.kernel.org
-Q:	http://patchwork.kernel.org/project/linux-sh/list/
+L:	linux-renesas-soc@vger.kernel.org
+Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 S:	Supported
 F:	arch/arm64/boot/dts/renesas/
@@ -2362,14 +2375,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
 S:	Maintained
 N:	bcm2835
 
-BROADCOM BCM33XX MIPS ARCHITECTURE
-M:	Kevin Cernekee <cernekee@gmail.com>
-L:	linux-mips@linux-mips.org
-S:	Maintained
-F:	arch/mips/bcm3384/*
-F:	arch/mips/include/asm/mach-bcm3384/*
-F:	arch/mips/kernel/*bmips*
-
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
@@ -3452,7 +3457,6 @@ F:	drivers/usb/dwc2/
 DESIGNWARE USB3 DRD IP DRIVER
 M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
-L:	linux-omap@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
 F:	drivers/usb/dwc3/
@@ -3758,7 +3762,7 @@ F:	include/drm/exynos*
 F:	include/uapi/drm/exynos*
 
 DRM DRIVERS FOR FREESCALE DCU
-M:	Jianwei Wang <jianwei.wang.chn@gmail.com>
+M:	Stefan Agner <stefan@agner.ch>
 M:	Alison Wang <alison.wang@freescale.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
@@ -4520,6 +4524,12 @@ L:	linuxppc-dev@lists.ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
+FREESCALE GPMI NAND DRIVER
+M:	Han Xu <han.xu@nxp.com>
+L:	linux-mtd@lists.infradead.org
+S:	Maintained
+F:	drivers/mtd/nand/gpmi-nand/*
+
 FREESCALE I2C CPM DRIVER
 M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@lists.ozlabs.org
@@ -4536,7 +4546,7 @@ F:	include/linux/platform_data/video-imxfb.h
 F:	drivers/video/fbdev/imxfb.c
 
 FREESCALE QUAD SPI DRIVER
-M:	Han Xu <han.xu@freescale.com>
+M:	Han Xu <han.xu@nxp.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/spi-nor/fsl-quadspi.c
@@ -4550,6 +4560,15 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
+FREESCALE IMX / MXC FEC DRIVER
+M:	Fugang Duan <fugang.duan@nxp.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/freescale/fec_main.c
+F:	drivers/net/ethernet/freescale/fec_ptp.c
+F:	drivers/net/ethernet/freescale/fec.h
+F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+
 FREESCALE QUICC ENGINE LIBRARY
 L:	linuxppc-dev@lists.ozlabs.org
 S:	Orphan
@@ -6136,7 +6155,7 @@ F:	include/uapi/linux/sunrpc/
 
 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuahkh@osg.samsung.com>
-L:	linux-api@vger.kernel.org
+L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/shuah/linux-kselftest
 S:	Maintained
 F:	tools/testing/selftests
@@ -6766,6 +6785,7 @@ S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
 F:	net/mac80211/
+F:	drivers/net/wireless/mac80211_hwsim.[ch]
 
 MACVLAN DRIVER
 M:	Patrick McHardy <kaber@trash.net>
@@ -7362,7 +7382,7 @@ F:	drivers/tty/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-M:	Felipe Balbi <balbi@kernel.org>
+M:	Bin Liu <b-liu@ti.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
 S:	Maintained
@@ -7694,13 +7714,13 @@ S:	Maintained
 F:	arch/nios2/
 
 NOKIA N900 POWER SUPPLY DRIVERS
-M:	Pali Rohár <pali.rohar@gmail.com>
-S:	Maintained
+R:	Pali Rohár <pali.rohar@gmail.com>
 F:	include/linux/power/bq2415x_charger.h
 F:	include/linux/power/bq27xxx_battery.h
 F:	include/linux/power/isp1704_charger.h
 F:	drivers/power/bq2415x_charger.c
 F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
 F:	drivers/power/isp1704_charger.c
 F:	drivers/power/rx51_battery.c
 
@@ -7931,11 +7951,9 @@ F:	drivers/media/platform/omap3isp/
 F:	drivers/staging/media/omap4iss/
 
 OMAP USB SUPPORT
-M:	Felipe Balbi <balbi@kernel.org>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/*/*omap*
 F:	arch/arm/*omap*/usb*
 
@@ -9566,6 +9584,12 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained
 F:	drivers/thunderbolt/
 
+TI BQ27XXX POWER SUPPLY DRIVER
+R:	Andrew F. Davis <afd@ti.com>
+F:	include/linux/power/bq27xxx_battery.h
+F:	drivers/power/bq27xxx_battery.c
+F:	drivers/power/bq27xxx_battery_i2c.c
+
 TIMEKEEPING, CLOCKSOURCE CORE, NTP, ALARMTIMER
 M:	John Stultz <john.stultz@linaro.org>
 M:	Thomas Gleixner <tglx@linutronix.de>
@@ -9787,10 +9811,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 Emulex 10Gbps NIC BE2, BE3-R, Lancer, Skyhawk-R DRIVER
-M:	Sathya Perla <sathya.perla@avagotech.com>
-M:	Ajit Khaparde <ajit.khaparde@avagotech.com>
-M:	Padmanabh Ratnakar <padmanabh.ratnakar@avagotech.com>
-M:	Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com>
+M:	Sathya Perla <sathya.perla@broadcom.com>
+M:	Ajit Khaparde <ajit.khaparde@broadcom.com>
+M:	Padmanabh Ratnakar <padmanabh.ratnakar@broadcom.com>
+M:	Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
+M:	Somnath Kotur <somnath.kotur@broadcom.com>
 L:	netdev@vger.kernel.org
 W:	http://www.emulex.com
 S:	Supported
@@ -10849,6 +10874,14 @@ L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/thermal/ti-soc-thermal/
 
+TI VPE/CAL DRIVERS
+M:	Benoit Parrot <bparrot@ti.com>
+L:	linux-media@vger.kernel.org
+W:	http://linuxtv.org/
+Q:	http://patchwork.linuxtv.org/project/linux-media/list/
+S:	Maintained
+F:	drivers/media/platform/ti-vpe/
+
 TI CDCE706 CLOCK DRIVER
 M:	Max Filippov <jcmvbkbc@gmail.com>
 S:	Maintained
@@ -12020,7 +12053,6 @@ F:	arch/arm64/xen/
 F:	arch/arm64/include/asm/xen/
 
 XEN NETWORK BACKEND DRIVER
-M:	Ian Campbell <ian.campbell@citrix.com>
 M:	Wei Liu <wei.liu2@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -12,8 +12,6 @@ config ARC
 	select BUILDTIME_EXTABLE_SORT
 	select COMMON_CLK
 	select CLONE_BACKWARDS
-	# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
-	select DEVTMPFS if !INITRAMFS_SOURCE=""
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_FIND_FIRST_BIT
@@ -275,14 +273,6 @@ config ARC_DCCM_BASE
 	default "0xA0000000"
 	depends on ARC_HAS_DCCM
 
-config ARC_HAS_HW_MPY
-	bool "Use Hardware Multiplier (Normal or Faster XMAC)"
-	default y
-	help
-	  Influences how gcc generates code for MPY operations.
-	  If enabled, MPYxx insns are generated, provided by Standard/XMAC
-	  Multipler. Otherwise software multipy lib is used
-
 choice
 	prompt "MMU Version"
 	default ARC_MMU_V3 if ARC_CPU_770
@@ -338,6 +328,19 @@ config ARC_PAGE_SIZE_4K
 
 endchoice
 
+choice
+	prompt "MMU Super Page Size"
+	depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE
+	default ARC_HUGEPAGE_2M
+
+config ARC_HUGEPAGE_2M
+	bool "2MB"
+
+config ARC_HUGEPAGE_16M
+	bool "16MB"
+
+endchoice
+
 if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
@@ -410,7 +413,7 @@ config ARC_HAS_RTC
 	default n
 	depends on !SMP
 
-config ARC_HAS_GRTC
+config ARC_HAS_GFRC
 	bool "SMP synchronized 64-bit cycle counter"
 	default y
 	depends on SMP
@@ -529,14 +532,6 @@ config ARC_DBG_TLB_MISS_COUNT
 	  Counts number of I and D TLB Misses and exports them via Debugfs
 	  The counters can be cleared via Debugfs as well
 
-if SMP
-
-config ARC_IPI_DBG
-	bool "Debug Inter Core interrupts"
-	default n
-
-endif
-
 endif
 
 config ARC_UBOOT_SUPPORT
@@ -566,6 +561,12 @@ endmenu
 endmenu	 # "ARC Architecture Configuration"
 
 source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+	int "Maximum zone order"
+	default "12" if ARC_HUGEPAGE_16M
+	default "11"
+
 source "net/Kconfig"
 source "drivers/Kconfig"
 source "fs/Kconfig"

arch/arc/Makefile

@@ -74,10 +74,6 @@ ldflags-$(CONFIG_CPU_BIG_ENDIAN)	+= -EB
 # --build-id w/o "-marclinux". Default arc-elf32-ld is OK
 ldflags-$(upto_gcc44)			+= -marclinux
 
-ifndef CONFIG_ARC_HAS_HW_MPY
-	cflags-y	+= -mno-mpy
-endif
-
 LIBGCC	:= $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
 
 # Modules with short calls might break for calls into builtin-kernel

arch/arc/configs/axs101_defconfig

@@ -39,6 +39,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -73,7 +74,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
@@ -91,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/axs103_defconfig

@@ -39,14 +39,10 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -78,14 +74,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -97,12 +91,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/axs103_smp_defconfig

@@ -40,14 +40,10 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AXS=y
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_NETDEVICES=y
@@ -79,14 +75,12 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_DESIGNWARE_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y
 CONFIG_USB_OHCI_HCD=y
@@ -98,12 +92,10 @@ CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y

arch/arc/configs/nsim_700_defconfig

@@ -4,6 +4,7 @@ CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -26,7 +27,6 @@ CONFIG_ARC_PLAT_SIM=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_700"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -34,6 +34,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -51,7 +52,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -63,4 +63,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsim_hs_defconfig

@@ -35,6 +35,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +50,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -61,4 +61,3 @@ CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_DEBUG_PREEMPT is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsim_hs_smp_defconfig

@@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
@@ -21,13 +22,11 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 CONFIG_ARC_BUILTIN_DTB_NAME="nsim_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -35,6 +34,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -49,7 +49,6 @@ CONFIG_SERIAL_ARC=y
 CONFIG_SERIAL_ARC_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_IOMMU_SUPPORT is not set
@@ -60,4 +59,3 @@ CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_XZ_DEC=y

arch/arc/configs/nsimosci_defconfig

@@ -33,6 +33,7 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -58,7 +59,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_defconfig

@@ -34,12 +34,12 @@ CONFIG_UNIX_DIAG=y
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IPV6 is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
 # CONFIG_BLK_DEV is not set
 CONFIG_NETDEVICES=y
-CONFIG_NET_OSCI_LAN=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
@@ -58,7 +58,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/nsimosci_hs_smp_defconfig

@@ -2,6 +2,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="ARCLinux"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_IKCONFIG=y
@@ -18,15 +19,11 @@ CONFIG_MODULES=y
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARC_PLAT_SIM=y
-CONFIG_ARC_BOARD_ML509=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-CONFIG_ARC_HAS_LL64=y
-# CONFIG_ARC_HAS_RTSC is not set
 CONFIG_ARC_BUILTIN_DTB_NAME="nsimosci_hs_idu"
 CONFIG_PREEMPT=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=y
@@ -40,6 +37,7 @@ CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FIRMWARE_IN_KERNEL is not set
@@ -56,14 +54,11 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NET_OSCI_LAN=y
 # CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_MOUSE_PS2_TOUCHKIT=y
 # CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_LIBPS2=y
 CONFIG_SERIO_ARC_PS2=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
@@ -75,9 +70,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 CONFIG_FB=y
-CONFIG_ARCPGU_RGB888=y
-CONFIG_ARCPGU_DISPTYPE=0
-# CONFIG_VGA_CONSOLE is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set

arch/arc/configs/tb10x_defconfig

@@ -3,6 +3,7 @@ CONFIG_CROSS_COMPILE="arc-linux-"
 CONFIG_DEFAULT_HOSTNAME="tb10x"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
@@ -26,12 +27,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLOCK is not set
 CONFIG_ARC_PLAT_TB10X=y
 CONFIG_ARC_CACHE_LINE_SHIFT=5
-CONFIG_ARC_STACK_NONEXEC=y
 CONFIG_HZ=250
 CONFIG_ARC_BUILTIN_DTB_NAME="abilis_tb100_dvk"
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_COMPACTION is not set
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -44,8 +43,8 @@ CONFIG_IP_MULTICAST=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
 # CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_NETDEVICES=y
 # CONFIG_NET_CADENCE is not set
 # CONFIG_NET_VENDOR_BROADCOM is not set
@@ -55,9 +54,6 @@ CONFIG_NETDEVICES=y
 # CONFIG_NET_VENDOR_NATSEMI is not set
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DEBUG_FS=y
-CONFIG_STMMAC_DA=y
-CONFIG_STMMAC_CHAINED=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT is not set
@@ -91,7 +87,6 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_LEDS_TRIGGER_TRANSIENT=y
 CONFIG_DMADEVICES=y
 CONFIG_DW_DMAC=y
-CONFIG_NET_DMA=y
 CONFIG_ASYNC_TX_DMA=y
 # CONFIG_IOMMU_SUPPORT is not set
 # CONFIG_DNOTIFY is not set
@@ -100,17 +95,16 @@ CONFIG_TMPFS=y
 CONFIG_CONFIGFS_FS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_STRIP_ASM_SYMS=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_SCHEDSTATS=y
 CONFIG_TIMER_STATS=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_DEBUG_STACKOVERFLOW=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
-# CONFIG_ARC_HAS_GRTC is not set
+# CONFIG_ARC_HAS_GFRC is not set
 CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y

arch/arc/include/asm/arcregs.h

@@ -10,7 +10,8 @@
 #define _ASM_ARC_ARCREGS_H
 
 /* Build Configuration Registers */
-#define ARC_REG_DCCMBASE_BCR	0x61	/* DCCM Base Addr */
+#define ARC_REG_AUX_DCCM	0x18	/* DCCM Base Addr ARCv2 */
+#define ARC_REG_DCCM_BASE_BUILD	0x61	/* DCCM Base Addr ARCompact */
 #define ARC_REG_CRC_BCR		0x62
 #define ARC_REG_VECBASE_BCR	0x68
 #define ARC_REG_PERIBASE_BCR	0x69
@@ -18,10 +19,10 @@
 #define ARC_REG_DPFP_BCR	0x6C	/* ARCompact: Dbl Precision FPU */
 #define ARC_REG_FP_V2_BCR	0xc8	/* ARCv2 FPU */
 #define ARC_REG_SLC_BCR		0xce
-#define ARC_REG_DCCM_BCR	0x74	/* DCCM Present + SZ */
+#define ARC_REG_DCCM_BUILD	0x74	/* DCCM size (common) */
 #define ARC_REG_TIMERS_BCR	0x75
 #define ARC_REG_AP_BCR		0x76
-#define ARC_REG_ICCM_BCR	0x78
+#define ARC_REG_ICCM_BUILD	0x78	/* ICCM size (common) */
 #define ARC_REG_XY_MEM_BCR	0x79
 #define ARC_REG_MAC_BCR		0x7a
 #define ARC_REG_MUL_BCR		0x7b
@@ -36,6 +37,7 @@
 #define ARC_REG_IRQ_BCR		0xF3
 #define ARC_REG_SMART_BCR	0xFF
 #define ARC_REG_CLUSTER_BCR	0xcf
+#define ARC_REG_AUX_ICCM	0x208	/* ICCM Base Addr (ARCv2) */
 
 /* status32 Bits Positions */
 #define STATUS_AE_BIT		5	/* Exception active */
@@ -246,7 +248,7 @@ struct bcr_perip {
 #endif
 };
 
-struct bcr_iccm {
+struct bcr_iccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int base:16, pad:5, sz:3, ver:8;
 #else
@@ -254,17 +256,15 @@ struct bcr_iccm {
 #endif
 };
 
-/* DCCM Base Address Register: ARC_REG_DCCMBASE_BCR */
-struct bcr_dccm_base {
+struct bcr_iccm_arcv2 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int addr:24, ver:8;
+	unsigned int pad:8, sz11:4, sz01:4, sz10:4, sz00:4, ver:8;
 #else
-	unsigned int ver:8, addr:24;
+	unsigned int ver:8, sz00:4, sz10:4, sz01:4, sz11:4, pad:8;
 #endif
 };
 
-/* DCCM RAM Configuration Register: ARC_REG_DCCM_BCR */
-struct bcr_dccm {
+struct bcr_dccm_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int res:21, sz:3, ver:8;
 #else
@@ -272,6 +272,14 @@ struct bcr_dccm {
 #endif
 };
 
+struct bcr_dccm_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad2:12, cyc:3, pad1:1, sz1:4, sz0:4, ver:8;
+#else
+	unsigned int ver:8, sz0:4, sz1:4, pad1:1, cyc:3, pad2:12;
+#endif
+};
+
 /* ARCompact: Both SP and DP FPU BCRs have same format */
 struct bcr_fp_arcompact {
 #ifdef CONFIG_CPU_BIG_ENDIAN
@@ -315,9 +323,9 @@ struct bcr_bpu_arcv2 {
 
 struct bcr_generic {
 #ifdef CONFIG_CPU_BIG_ENDIAN
-	unsigned int pad:24, ver:8;
+	unsigned int info:24, ver:8;
 #else
-	unsigned int ver:8, pad:24;
+	unsigned int ver:8, info:24;
 #endif
 };
 
@@ -349,14 +357,13 @@ struct cpuinfo_arc {
 	struct cpuinfo_arc_bpu bpu;
 	struct bcr_identity core;
 	struct bcr_isa isa;
-	struct bcr_timer timers;
 	unsigned int vec_base;
 	struct cpuinfo_arc_ccm iccm, dccm;
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
 			     fpu_sp:1, fpu_dp:1, pad2:6,
 			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
-			     pad4:8;
+			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
 	struct bcr_extn_xymem extn_xymem;

arch/arc/include/asm/irq.h

@@ -16,11 +16,9 @@
 #ifdef CONFIG_ISA_ARCOMPACT
 #define TIMER0_IRQ      3
 #define TIMER1_IRQ      4
-#define IPI_IRQ		(NR_CPU_IRQS-1) /* dummy to enable SMP build for up hardware */
 #else
 #define TIMER0_IRQ      16
 #define TIMER1_IRQ      17
-#define IPI_IRQ         19
 #endif
 
 #include <linux/interrupt.h>

arch/arc/include/asm/irqflags-arcv2.h

@@ -22,6 +22,7 @@
 #define AUX_IRQ_CTRL		0x00E
 #define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
 #define AUX_IRQ_LVL_PEND	0x200	/* Pending Intr across all levels */
+#define AUX_IRQ_HINT		0x201	/* For generating Soft Interrupts */
 #define AUX_IRQ_PRIORITY	0x206
 #define ICAUSE			0x40a
 #define AUX_IRQ_SELECT		0x40b
@@ -30,8 +31,11 @@
 /* Was Intr taken in User Mode */
 #define AUX_IRQ_ACT_BIT_U	31
 
-/* 0 is highest level, but taken by FIRQs, if present in design */
-#define ARCV2_IRQ_DEF_PRIO		0
+/*
+ * User space should be interruptable even by lowest prio interrupt
+ * Safe even if actual interrupt priorities is fewer or even one
+ */
+#define ARCV2_IRQ_DEF_PRIO	15
 
 /* seed value for status register */
 #define ISA_INIT_STATUS_BITS	(STATUS_IE_MASK | STATUS_AD_MASK | \
@@ -112,6 +116,16 @@ static inline int arch_irqs_disabled(void)
 	return arch_irqs_disabled_flags(arch_local_save_flags());
 }
 
+static inline void arc_softirq_trigger(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, irq);
+}
+
+static inline void arc_softirq_clear(int irq)
+{
+	write_aux_reg(AUX_IRQ_HINT, 0);
+}
+
 #else
 
 .macro IRQ_DISABLE  scratch

arch/arc/include/asm/mcip.h

@@ -39,8 +39,8 @@ struct mcip_cmd {
 #define CMD_DEBUG_SET_MASK		0x34
 #define CMD_DEBUG_SET_SELECT		0x36
 
-#define CMD_GRTC_READ_LO		0x42
-#define CMD_GRTC_READ_HI		0x43
+#define CMD_GFRC_READ_LO		0x42
+#define CMD_GFRC_READ_HI		0x43
 
 #define CMD_IDU_ENABLE			0x71
 #define CMD_IDU_DISABLE			0x72

arch/arc/include/asm/pgtable.h

@@ -179,37 +179,44 @@
 #define __S111  PAGE_U_X_W_R
 
 /****************************************************************
- * Page Table Lookup split
+ * 2 tier (PGD:PTE) software page walker
  *
- * We implement 2 tier paging and since this is all software, we are free
- * to customize the span of a PGD / PTE entry to suit us
- *
- *			32 bit virtual address
+ * [31]		    32 bit virtual address              [0]
  * -------------------------------------------------------
- * | BITS_FOR_PGD    |  BITS_FOR_PTE    |  BITS_IN_PAGE  |
+ * |               | <------------ PGDIR_SHIFT ----------> |
+ * |		   |					 |
+ * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
  * -------------------------------------------------------
  *       |                  |                |
  *       |                  |                --> off in page frame
- *       |		    |
  *       |                  ---> index into Page Table
- *       |
  *       ----> index into Page Directory
+ *
+ * In a single page size configuration, only PAGE_SHIFT is fixed
+ * So both PGD and PTE sizing can be tweaked
+ *  e.g. 8K page (PAGE_SHIFT 13) can have
+ *  - PGDIR_SHIFT 21  -> 11:8:13 address split
+ *  - PGDIR_SHIFT 24  -> 8:11:13 address split
+ *
+ * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
+ * so the sizing flexibility is gone.
  */
 
-#define BITS_IN_PAGE	PAGE_SHIFT
-
-/* Optimal Sizing of Pg Tbl - based on MMU page size */
-#if defined(CONFIG_ARC_PAGE_SIZE_8K)
-#define BITS_FOR_PTE	8		/* 11:8:13 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_16K)
-#define BITS_FOR_PTE	8		/* 10:8:14 */
-#elif defined(CONFIG_ARC_PAGE_SIZE_4K)
-#define BITS_FOR_PTE	9		/* 11:9:12 */
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT	24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT	21
+#else
+/*
+ * Only Normal page support so "hackable" (see comment above)
+ * Default value provides 11:8:13 (8K), 11:9:12 (4K)
+ */
+#define PGDIR_SHIFT	21
 #endif
 
-#define BITS_FOR_PGD	(32 - BITS_FOR_PTE - BITS_IN_PAGE)
+#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
+#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
 
-#define PGDIR_SHIFT	(32 - BITS_FOR_PGD)
 #define PGDIR_SIZE	(1UL << PGDIR_SHIFT)	/* vaddr span, not PDG sz */
 #define PGDIR_MASK	(~(PGDIR_SIZE-1))
 

arch/arc/kernel/entry-arcv2.S

@@ -45,11 +45,12 @@ VECTOR	reserved		; Reserved slots
 VECTOR	handle_interrupt	; (16) Timer0
 VECTOR	handle_interrupt	; unused (Timer1)
 VECTOR	handle_interrupt	; unused (WDT)
-VECTOR	handle_interrupt	; (19) ICI (inter core interrupt)
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt
-VECTOR	handle_interrupt	; (23) End of fixed IRQs
+VECTOR	handle_interrupt	; (19) Inter core Interrupt (IPI)
+VECTOR	handle_interrupt	; (20) perf Interrupt
+VECTOR	handle_interrupt	; (21) Software Triggered Intr (Self IPI)
+VECTOR	handle_interrupt	; unused
+VECTOR	handle_interrupt	; (23) unused
+# End of fixed IRQs
 
 .rept CONFIG_ARC_NUMBER_OF_INTERRUPTS - 8
 	VECTOR	handle_interrupt
@@ -211,7 +212,11 @@ debug_marker_syscall:
 ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig
 ; entry was via Exception in DS which got preempted in kernel).
 ;
-; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling
+; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround
+;
+; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline
+; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly
+
 .Lintr_ret_to_delay_slot:
 debug_marker_ds:
 
@@ -222,18 +227,23 @@ debug_marker_ds:
 	ld	r2, [sp, PT_ret]
 	ld	r3, [sp, PT_status32]
 
+	; STAT32 for Int return created from scratch
+	; (No delay dlot, disable Further intr in trampoline)
+
 	bic  	r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK
 	st	r0, [sp, PT_status32]
 
 	mov	r1, .Lintr_ret_to_delay_slot_2
 	st	r1, [sp, PT_ret]
 
+	; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots
 	st	r2, [sp, 0]
 	st	r3, [sp, 4]
 
 	b	.Lisr_ret_fast_path
 
 .Lintr_ret_to_delay_slot_2:
+	; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP
 	sub	sp, sp, SZ_PT_REGS
 	st	r9, [sp, -4]
 
@@ -243,11 +253,19 @@ debug_marker_ds:
 	ld	r9, [sp, 4]
 	sr	r9, [erstatus]
 
+	; restore AUX_USER_SP if returning to U mode
+	bbit0	r9, STATUS_U_BIT, 1f
+	ld	r9, [sp, PT_sp]
+	sr	r9, [AUX_USER_SP]
+
+1:
 	ld	r9, [sp, 8]
 	sr	r9, [erbta]
 
 	ld	r9, [sp, -4]
 	add	sp, sp, SZ_PT_REGS
+
+	; return from pure kernel mode to delay slot
 	rtie
 
 END(ret_from_exception)

arch/arc/kernel/intc-arcv2.c

@@ -14,6 +14,8 @@
 #include <linux/irqchip.h>
 #include <asm/irq.h>
 
+static int irq_prio;
+
 /*
  * Early Hardware specific Interrupt setup
  * -Called very early (start_kernel -> setup_arch -> setup_processor)
@@ -24,6 +26,14 @@ void arc_init_IRQ(void)
 {
 	unsigned int tmp;
 
+	struct irq_build {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+		unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8;
+#else
+		unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3;
+#endif
+	} irq_bcr;
+
 	struct aux_irq_ctrl {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int res3:18, save_idx_regs:1, res2:1,
@@ -46,28 +56,25 @@ void arc_init_IRQ(void)
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 
-	/* setup status32, don't enable intr yet as kernel doesn't want */
-	tmp = read_aux_reg(0xa);
-	tmp |= ISA_INIT_STATUS_BITS;
-	tmp &= ~STATUS_IE_MASK;
-	asm volatile("flag %0	\n"::"r"(tmp));
-
 	/*
 	 * ARCv2 core intc provides multiple interrupt priorities (upto 16).
 	 * Typical builds though have only two levels (0-high, 1-low)
 	 * Linux by default uses lower prio 1 for most irqs, reserving 0 for
 	 * NMI style interrupts in future (say perf)
-	 *
-	 * Read the intc BCR to confirm that Linux default priority is avail
-	 * in h/w
-	 *
-	 * Note:
-	 *  IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
-	 *  is 0 based.
 	 */
-	tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
-	if (ARCV2_IRQ_DEF_PRIO > tmp)
-		panic("Linux default irq prio incorrect\n");
+
+	READ_BCR(ARC_REG_IRQ_BCR, irq_bcr);
+
+	irq_prio = irq_bcr.prio;	/* Encoded as N-1 for N levels */
+	pr_info("archs-intc\t: %d priority levels (default %d)%s\n",
+		irq_prio + 1, irq_prio,
+		irq_bcr.firq ? " FIRQ (not used)":"");
+
+	/* setup status32, don't enable intr yet as kernel doesn't want */
+	tmp = read_aux_reg(0xa);
+	tmp |= STATUS_AD_MASK | (irq_prio << 1);
+	tmp &= ~STATUS_IE_MASK;
+	asm volatile("flag %0	\n"::"r"(tmp));
 }
 
 static void arcv2_irq_mask(struct irq_data *data)
@@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data)
 {
 	/* set default priority */
 	write_aux_reg(AUX_IRQ_SELECT, data->irq);
-	write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
+	write_aux_reg(AUX_IRQ_PRIORITY, irq_prio);
 
 	/*
 	 * hw auto enables (linux unmask) all by default

arch/arc/kernel/intc-compact.c

@@ -81,9 +81,6 @@ static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq,
 {
 	switch (irq) {
 	case TIMER0_IRQ:
-#ifdef CONFIG_SMP
-	case IPI_IRQ:
-#endif
 		irq_set_chip_and_handler(irq, &onchip_intc, handle_percpu_irq);
 		break;
 	default:

arch/arc/kernel/mcip.c

@@ -11,9 +11,13 @@
 #include <linux/smp.h>
 #include <linux/irq.h>
 #include <linux/spinlock.h>
+#include <asm/irqflags-arcv2.h>
 #include <asm/mcip.h>
 #include <asm/setup.h>
 
+#define IPI_IRQ		19
+#define SOFTIRQ_IRQ	21
+
 static char smp_cpuinfo_buf[128];
 static int idu_detected;
 
@@ -22,6 +26,7 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 static void mcip_setup_per_cpu(int cpu)
 {
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
+	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -29,46 +34,44 @@ static void mcip_ipi_send(int cpu)
 	unsigned long flags;
 	int ipi_was_pending;
 
+	/* ARConnect can only send IPI to others */
+	if (unlikely(cpu == raw_smp_processor_id())) {
+		arc_softirq_trigger(SOFTIRQ_IRQ);
+		return;
+	}
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
 	/*
-	 * NOTE: We must spin here if the other cpu hasn't yet
-	 * serviced a previous message. This can burn lots
-	 * of time, but we MUST follows this protocol or
-	 * ipi messages can be lost!!!
-	 * Also, we must release the lock in this loop because
-	 * the other side may get to this same loop and not
-	 * be able to ack -- thus causing deadlock.
+	 * If receiver already has a pending interrupt, elide sending this one.
+	 * Linux cross core calling works well with concurrent IPIs
+	 * coalesced into one
+	 * see arch/arc/kernel/smp.c: ipi_send_msg_one()
 	 */
+	__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
+	ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
+	if (!ipi_was_pending)
+		__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 
-	do {
-		raw_spin_lock_irqsave(&mcip_lock, flags);
-		__mcip_cmd(CMD_INTRPT_READ_STATUS, cpu);
-		ipi_was_pending = read_aux_reg(ARC_REG_MCIP_READBACK);
-		if (ipi_was_pending == 0)
-			break; /* break out but keep lock */
-		raw_spin_unlock_irqrestore(&mcip_lock, flags);
-	} while (1);
-
-	__mcip_cmd(CMD_INTRPT_GENERATE_IRQ, cpu);
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (ipi_was_pending)
-		pr_info("IPI ACK delayed from cpu %d\n", cpu);
-#endif
 }
 
 static void mcip_ipi_clear(int irq)
 {
 	unsigned int cpu, c;
 	unsigned long flags;
-	unsigned int __maybe_unused copy;
+
+	if (unlikely(irq == SOFTIRQ_IRQ)) {
+		arc_softirq_clear(irq);
+		return;
+	}
 
 	raw_spin_lock_irqsave(&mcip_lock, flags);
 
 	/* Who sent the IPI */
 	__mcip_cmd(CMD_INTRPT_CHECK_SOURCE, 0);
 
-	copy = cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
+	cpu = read_aux_reg(ARC_REG_MCIP_READBACK);	/* 1,2,4,8... */
 
 	/*
 	 * In rare case, multiple concurrent IPIs sent to same target can
@@ -82,12 +85,6 @@ static void mcip_ipi_clear(int irq)
 	} while (cpu);
 
 	raw_spin_unlock_irqrestore(&mcip_lock, flags);
-
-#ifdef CONFIG_ARC_IPI_DBG
-	if (c != __ffs(copy))
-		pr_info("IPIs from %x coalesced to %x\n",
-			copy, raw_smp_processor_id());
-#endif
 }
 
 static void mcip_probe_n_setup(void)
@@ -96,13 +93,13 @@ static void mcip_probe_n_setup(void)
 #ifdef CONFIG_CPU_BIG_ENDIAN
 		unsigned int pad3:8,
 			     idu:1, llm:1, num_cores:6,
-			     iocoh:1,  grtc:1, dbg:1, pad2:1,
+			     iocoh:1,  gfrc:1, dbg:1, pad2:1,
 			     msg:1, sem:1, ipi:1, pad:1,
 			     ver:8;
 #else
 		unsigned int ver:8,
 			     pad:1, ipi:1, sem:1, msg:1,
-			     pad2:1, dbg:1, grtc:1, iocoh:1,
+			     pad2:1, dbg:1, gfrc:1, iocoh:1,
 			     num_cores:6, llm:1, idu:1,
 			     pad3:8;
 #endif
@@ -111,12 +108,13 @@ static void mcip_probe_n_setup(void)
 	READ_BCR(ARC_REG_MCIP_BCR, mp);
 
 	sprintf(smp_cpuinfo_buf,
-		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s\n",
+		"Extn [SMP]\t: ARConnect (v%d): %d cores with %s%s%s%s%s\n",
 		mp.ver, mp.num_cores,
 		IS_AVAIL1(mp.ipi, "IPI "),
 		IS_AVAIL1(mp.idu, "IDU "),
+		IS_AVAIL1(mp.llm, "LLM "),
 		IS_AVAIL1(mp.dbg, "DEBUG "),
-		IS_AVAIL1(mp.grtc, "GRTC"));
+		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	idu_detected = mp.idu;
 
@@ -125,8 +123,8 @@ static void mcip_probe_n_setup(void)
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc)
-		panic("kernel trying to use non-existent GRTC\n");
+	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
+		panic("kernel trying to use non-existent GFRC\n");
 }
 
 struct plat_smp_ops plat_smp_ops = {

arch/arc/kernel/setup.c

@@ -42,9 +42,57 @@ struct task_struct *_current_task[NR_CPUS];	/* For stack switching */
 
 struct cpuinfo_arc cpuinfo_arc700[NR_CPUS];
 
+static void read_decode_ccm_bcr(struct cpuinfo_arc *cpu)
+{
+	if (is_isa_arcompact()) {
+		struct bcr_iccm_arcompact iccm;
+		struct bcr_dccm_arcompact dccm;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 4096 << iccm.sz;	/* 8K to 512K */
+			cpu->iccm.base_addr = iccm.base << 16;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			unsigned long base;
+			cpu->dccm.sz = 2048 << dccm.sz;	/* 2K to 256K */
+
+			base = read_aux_reg(ARC_REG_DCCM_BASE_BUILD);
+			cpu->dccm.base_addr = base & ~0xF;
+		}
+	} else {
+		struct bcr_iccm_arcv2 iccm;
+		struct bcr_dccm_arcv2 dccm;
+		unsigned long region;
+
+		READ_BCR(ARC_REG_ICCM_BUILD, iccm);
+		if (iccm.ver) {
+			cpu->iccm.sz = 256 << iccm.sz00;	/* 512B to 16M */
+			if (iccm.sz00 == 0xF && iccm.sz01 > 0)
+				cpu->iccm.sz <<= iccm.sz01;
+
+			region = read_aux_reg(ARC_REG_AUX_ICCM);
+			cpu->iccm.base_addr = region & 0xF0000000;
+		}
+
+		READ_BCR(ARC_REG_DCCM_BUILD, dccm);
+		if (dccm.ver) {
+			cpu->dccm.sz = 256 << dccm.sz0;
+			if (dccm.sz0 == 0xF && dccm.sz1 > 0)
+				cpu->dccm.sz <<= dccm.sz1;
+
+			region = read_aux_reg(ARC_REG_AUX_DCCM);
+			cpu->dccm.base_addr = region & 0xF0000000;
+		}
+	}
+}
+
 static void read_arc_build_cfg_regs(void)
 {
 	struct bcr_perip uncached_space;
+	struct bcr_timer timer;
 	struct bcr_generic bcr;
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	unsigned long perip_space;
@@ -53,7 +101,11 @@ static void read_arc_build_cfg_regs(void)
 	READ_BCR(AUX_IDENTITY, cpu->core);
 	READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
 
-	READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
+	READ_BCR(ARC_REG_TIMERS_BCR, timer);
+	cpu->extn.timer0 = timer.t0;
+	cpu->extn.timer1 = timer.t1;
+	cpu->extn.rtc = timer.rtc;
+
 	cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
 
 	READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
@@ -71,36 +123,11 @@ static void read_arc_build_cfg_regs(void)
 	cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0;        /* 1,3 */
 	cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
 	cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
-
-	/* Note that we read the CCM BCRs independent of kernel config
-	 * This is to catch the cases where user doesn't know that
-	 * CCMs are present in hardware build
-	 */
-	{
-		struct bcr_iccm iccm;
-		struct bcr_dccm dccm;
-		struct bcr_dccm_base dccm_base;
-		unsigned int bcr_32bit_val;
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_ICCM_BCR);
-		if (bcr_32bit_val) {
-			iccm = *((struct bcr_iccm *)&bcr_32bit_val);
-			cpu->iccm.base_addr = iccm.base << 16;
-			cpu->iccm.sz = 0x2000 << (iccm.sz - 1);
-		}
-
-		bcr_32bit_val = read_aux_reg(ARC_REG_DCCM_BCR);
-		if (bcr_32bit_val) {
-			dccm = *((struct bcr_dccm *)&bcr_32bit_val);
-			cpu->dccm.sz = 0x800 << (dccm.sz);
-
-			READ_BCR(ARC_REG_DCCMBASE_BCR, dccm_base);
-			cpu->dccm.base_addr = dccm_base.addr << 8;
-		}
-	}
-
 	READ_BCR(ARC_REG_XY_MEM_BCR, cpu->extn_xymem);
 
+	/* Read CCM BCRs for boot reporting even if not enabled in Kconfig */
+	read_decode_ccm_bcr(cpu);
+
 	read_decode_mmu_bcr();
 	read_decode_cache_bcr();
 
@@ -208,9 +235,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       (unsigned int)(arc_get_core_freq() / 10000) % 100);
 
 	n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
-		       IS_AVAIL1(cpu->timers.t0, "Timer0 "),
-		       IS_AVAIL1(cpu->timers.t1, "Timer1 "),
-		       IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ",
+		       IS_AVAIL1(cpu->extn.timer0, "Timer0 "),
+		       IS_AVAIL1(cpu->extn.timer1, "Timer1 "),
+		       IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ",
 				 CONFIG_ARC_HAS_RTC));
 
 	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
@@ -232,8 +259,6 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 
 			n += scnprintf(buf + n, len - n, "mpy[opt %d] ", opt);
 		}
-		n += scnprintf(buf + n, len - n, "%s",
-			       IS_USED_CFG(CONFIG_ARC_HAS_HW_MPY));
 	}
 
 	n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
@@ -293,13 +318,13 @@ static void arc_chk_core_config(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	int fpu_enabled;
 
-	if (!cpu->timers.t0)
+	if (!cpu->extn.timer0)
 		panic("Timer0 is not present!\n");
 
-	if (!cpu->timers.t1)
+	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc)
+	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
 		panic("RTC is not present\n");
 
 #ifdef CONFIG_ARC_HAS_DCCM
@@ -334,6 +359,7 @@ static void arc_chk_core_config(void)
 		panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
 
 	if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic &&
+	    IS_ENABLED(CONFIG_ARC_HAS_LLSC) &&
 	    !IS_ENABLED(CONFIG_ARC_STAR_9000923308))
 		panic("llock/scond livelock workaround missing\n");
 }

arch/arc/kernel/smp.c

@@ -336,11 +336,8 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 		int rc;
 
 		rc = __do_IPI(msg);
-#ifdef CONFIG_ARC_IPI_DBG
-		/* IPI received but no valid @msg */
 		if (rc)
 			pr_info("IPI with bogus msg %ld in %ld\n", msg, copy);
-#endif
 		pending &= ~(1U << msg);
 	} while (pending);
 

arch/arc/kernel/time.c

@@ -62,7 +62,7 @@
 
 /********** Clock Source Device *********/
 
-#ifdef CONFIG_ARC_HAS_GRTC
+#ifdef CONFIG_ARC_HAS_GFRC
 
 static int arc_counter_setup(void)
 {
@@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 
 	local_irq_save(flags);
 
-	__mcip_cmd(CMD_GRTC_READ_LO, 0);
+	__mcip_cmd(CMD_GFRC_READ_LO, 0);
 	stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK);
 
-	__mcip_cmd(CMD_GRTC_READ_HI, 0);
+	__mcip_cmd(CMD_GFRC_READ_HI, 0);
 	stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK);
 
 	local_irq_restore(flags);
@@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 }
 
 static struct clocksource arc_counter = {
-	.name   = "ARConnect GRTC",
+	.name   = "ARConnect GFRC",
 	.rating = 400,
 	.read   = arc_counter_read,
 	.mask   = CLOCKSOURCE_MASK(64),

arch/arm/boot/compressed/Makefile

@@ -195,5 +195,7 @@ CFLAGS_font.o := -Dstatic=
 $(obj)/font.c: $(FONTC)
 	$(call cmd,shipped)
 
+AFLAGS_hyp-stub.o := -Wa,-march=armv7-a
+
 $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
 	$(call cmd,shipped)

arch/arm/boot/dts/am335x-bone-common.dtsi

@@ -285,8 +285,10 @@
 	};
 };
 
+
+/include/ "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	/*
 	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
 	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
@@ -307,17 +309,12 @@
 	ti,pmic-shutdown-controller;
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -327,7 +324,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -337,25 +333,21 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};

arch/arm/boot/dts/am335x-chilisom.dtsi

@@ -128,21 +128,16 @@
 
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -152,7 +147,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -162,28 +156,24 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			regulator-name = "vio,vrtc,vdds";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			regulator-name = "vdd_3v3aux";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			regulator-name = "vdd_1v8";
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			regulator-name = "vdd_3v3d";
 			regulator-boot-on;
 			regulator-always-on;

arch/arm/boot/dts/am335x-nano.dts

@@ -375,15 +375,11 @@
 	wp-gpios = <&gpio3 18 0>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+#include "tps65217.dtsi"
 
+&tps {
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* +1.5V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1450000>;
 			regulator-max-microvolt = <1550000>;
@@ -392,7 +388,6 @@
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <915000>;
@@ -402,7 +397,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <915000>;
@@ -412,7 +406,6 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -421,7 +414,6 @@
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;
@@ -430,7 +422,6 @@
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* +1.8V voltage with ±4% tolerance */
 			regulator-min-microvolt = <1750000>;
 			regulator-max-microvolt = <1870000>;
@@ -439,7 +430,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* +3.3V voltage with ±4% tolerance */
 			regulator-min-microvolt = <3175000>;
 			regulator-max-microvolt = <3430000>;

arch/arm/boot/dts/am335x-pepper.dts

@@ -420,9 +420,9 @@
 	vin-supply = <&vbat>;
 };
 
-&tps {
-	compatible = "ti,tps65217";
+/include/ "tps65217.dtsi"
 
+&tps {
 	backlight {
 		isel = <1>; /* ISET1 */
 		fdim = <200>; /* TPS65217_BL_FDIM_200HZ */
@@ -430,17 +430,12 @@
 	};
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDD_1V8 system supply */
 			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -450,7 +445,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -460,21 +454,18 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC 1.8V always-on supply */
 			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* 3.3V rail */
 			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_3V3A 3.3V rail */
 			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
@@ -482,7 +473,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3B 3.3V rail */
 			regulator-name = "vdd_3v3b";
 			regulator-always-on;

arch/arm/boot/dts/am335x-shc.dts

@@ -46,7 +46,7 @@
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		front_button {
@@ -54,7 +54,7 @@
 			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_FRONT>;
 			debounce-interval = <1000>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 

arch/arm/boot/dts/am335x-sl50.dts

@@ -375,19 +375,16 @@
 	pinctrl-0 = <&uart4_pins>;
 };
 
+#include "tps65217.dtsi"
+
 &tps {
-	compatible = "ti,tps65217";
 	ti,pmic-shutdown-controller;
 
 	interrupt-parent = <&intc>;
 	interrupts = <7>;	/* NNMI */
 
 	regulators {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		dcdc1_reg: regulator@0 {
-			reg = <0>;
 			/* VDDS_DDR */
 			regulator-min-microvolt = <1500000>;
 			regulator-max-microvolt = <1500000>;
@@ -395,7 +392,6 @@
 		};
 
 		dcdc2_reg: regulator@1 {
-			reg = <1>;
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
@@ -405,7 +401,6 @@
 		};
 
 		dcdc3_reg: regulator@2 {
-			reg = <2>;
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
@@ -415,7 +410,6 @@
 		};
 
 		ldo1_reg: regulator@3 {
-			reg = <3>;
 			/* VRTC / VIO / VDDS*/
 			regulator-always-on;
 			regulator-min-microvolt = <1800000>;
@@ -423,7 +417,6 @@
 		};
 
 		ldo2_reg: regulator@4 {
-			reg = <4>;
 			/* VDD_3V3AUX */
 			regulator-always-on;
 			regulator-min-microvolt = <3300000>;
@@ -431,7 +424,6 @@
 		};
 
 		ldo3_reg: regulator@5 {
-			reg = <5>;
 			/* VDD_1V8 */
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -439,7 +431,6 @@
 		};
 
 		ldo4_reg: regulator@6 {
-			reg = <6>;
 			/* VDD_3V3A */
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -173,6 +173,8 @@
 
 		sound0_master: simple-audio-card,codec {
 			sound-dai = <&tlv320aic3104>;
+			assigned-clocks = <&clkoutmux2_clk_mux>;
+			assigned-clock-parents = <&sys_clk2_dclk_div>;
 			clocks = <&clkout2_clk>;
 		};
 	};
@@ -796,6 +798,8 @@
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp3_pins_default>;
 	pinctrl-1 = <&mcasp3_pins_sleep>;
+	assigned-clocks = <&mcasp3_ahclkx_mux>;
+	assigned-clock-parents = <&sys_clkin2>;
 	status = "okay";
 
 	op-mode = <0>;	/* MCASP_IIS_MODE */

arch/arm/boot/dts/am57xx-cl-som-am57x.dts

@@ -545,7 +545,7 @@
 		ti,debounce-tol = /bits/ 16 <10>;
 		ti,debounce-rep = /bits/ 16 <1>;
 
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 

arch/arm/boot/dts/armada-xp-axpwifiap.dts

@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-db.dts

@@ -76,8 +76,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-gp.dts

@@ -95,8 +95,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -65,8 +65,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-linksys-mamba.dts

@@ -70,8 +70,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-matrix.dts

@@ -68,8 +68,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {

arch/arm/boot/dts/armada-xp-netgear-rn2120.dts

@@ -64,8 +64,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts

@@ -65,9 +65,9 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		devbus-bootcs {
 			status = "okay";

arch/arm/boot/dts/armada-xp-synology-ds414.dts

@@ -78,8 +78,8 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000
-			  MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>;
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		pcie-controller {
 			status = "okay";

arch/arm/boot/dts/dra7.dtsi

@@ -1500,6 +1500,16 @@
 			       0x48485200 0x2E00>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
 			/*
 			 * rx_thresh_pend
 			 * rx_pend

arch/arm/boot/dts/imx6qdl.dtsi

@@ -896,7 +896,6 @@
 				#size-cells = <1>;
 				reg = <0x2100000 0x10000>;
 				ranges = <0 0x2100000 0x10000>;
-				interrupt-parent = <&intc>;
 				clocks = <&clks IMX6QDL_CLK_CAAM_MEM>,
 					 <&clks IMX6QDL_CLK_CAAM_ACLK>,
 					 <&clks IMX6QDL_CLK_CAAM_IPG>,

arch/arm/boot/dts/kirkwood-ds112.dts

@@ -14,7 +14,7 @@
 #include "kirkwood-synology.dtsi"
 
 / {
-	model = "Synology DS111";
+	model = "Synology DS112";
 	compatible = "synology,ds111", "marvell,kirkwood";
 
 	memory {

arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts

@@ -228,6 +228,37 @@
 	};
 };
 
+&devbus_bootcs {
+	status = "okay";
+	devbus,keep-config;
+
+	flash@0 {
+		compatible = "jedec-flash";
+		reg = <0 0x40000>;
+		bank-width = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			header@0 {
+				reg = <0 0x30000>;
+				read-only;
+			};
+
+			uboot@30000 {
+				reg = <0x30000 0xF000>;
+				read-only;
+			};
+
+			uboot_env@3F000 {
+				reg = <0x3F000 0x1000>;
+			};
+		};
+	};
+};
+
 &mdio {
 	status = "okay";
 

arch/arm/boot/dts/r8a7791-porter.dts

@@ -283,7 +283,6 @@
 	pinctrl-names = "default";
 
 	status = "okay";
-	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
 };
 
 &usbphy {

arch/arm/boot/dts/sama5d2-pinfunc.h

@@ -90,7 +90,7 @@
 #define PIN_PA14__I2SC1_MCK		PINMUX_PIN(PIN_PA14, 4, 2)
 #define PIN_PA14__FLEXCOM3_IO2		PINMUX_PIN(PIN_PA14, 5, 1)
 #define PIN_PA14__D9			PINMUX_PIN(PIN_PA14, 6, 2)
-#define PIN_PA15			14
+#define PIN_PA15			15
 #define PIN_PA15__GPIO			PINMUX_PIN(PIN_PA15, 0, 0)
 #define PIN_PA15__SPI0_MOSI		PINMUX_PIN(PIN_PA15, 1, 1)
 #define PIN_PA15__TF1			PINMUX_PIN(PIN_PA15, 2, 1)

arch/arm/boot/dts/tps65217.dtsi

@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Integrated Power Management Chip
+ * http://www.ti.com/lit/ds/symlink/tps65217.pdf
+ */
+
+&tps {
+	compatible = "ti,tps65217";
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-compatible = "dcdc1";
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			regulator-compatible = "dcdc2";
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			regulator-compatible = "dcdc3";
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-compatible = "ldo1";
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-compatible = "ldo2";
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-compatible = "ldo3";
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-compatible = "ldo4";
+		};
+	};
+};

arch/arm/common/icst.c

@@ -16,7 +16,7 @@
  */
 #include <linux/module.h>
 #include <linux/kernel.h>
-
+#include <asm/div64.h>
 #include <asm/hardware/icst.h>
 
 /*
@@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div);
 
 unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco)
 {
-	return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]);
+	u64 dividend = p->ref * 2 * (u64)(vco.v + 8);
+	u32 divisor = (vco.r + 2) * p->s2div[vco.s];
+
+	do_div(dividend, divisor);
+	return (unsigned long)dividend;
 }
 
 EXPORT_SYMBOL(icst_hz);
@@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq)
 
 		if (f > p->vco_min && f <= p->vco_max)
 			break;
+		i++;
 	} while (i < 8);
 
 	if (i >= 8)

arch/arm/configs/omap2plus_defconfig

@@ -292,24 +292,23 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y

arch/arm/crypto/aes-ce-glue.c

@@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_blkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ce_aes_setkey,
 		.encrypt	= ecb_encrypt,
 		.decrypt	= ecb_decrypt,
@@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { {
 	.cra_ablkcipher = {
 		.min_keysize	= AES_MIN_KEY_SIZE,
 		.max_keysize	= AES_MAX_KEY_SIZE,
-		.ivsize		= AES_BLOCK_SIZE,
+		.ivsize		= 0,
 		.setkey		= ablk_set_key,
 		.encrypt	= ablk_encrypt,
 		.decrypt	= ablk_decrypt,

arch/arm/include/asm/arch_gicv3.h

@@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void)
 	u32 irqstat;
 
 	asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat));
+	dsb(sy);
 	return irqstat;
 }