Merge tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu into next/multiplatform

Merge "mvebu soc for 4.5 (part 1)" from Gregory CLEMENT:

- orion5x/mv78xx0 multiplatform conversion
- legacy dove PMU support conversion

* tag 'mvebu-soc-4.5-1' of git://git.infradead.org/linux-mvebu:
  ARM: dove: convert legacy dove to PMU support
  soc: dove: add legacy support to PMU driver
  ARM: orion5x: multiplatform support
  ARM: orion5x: clean up mach/*.h headers
  ARM: mv78xx0: multiplatform support
  ARM: mv78xx0: clean up mach/*.h headers
  ARM: orion: use SPARSE_IRQ everywhere
  ARM: orion: always use MULTI_IRQ_HANDLER
  ARM: orion: move watchdog setup to mach-orion5x

Conflicts:
	arch/arm/Kconfig
	arch/arm/mach-dove/include/mach/entry-macro.S
	arch/arm/mach-orion5x/include/mach/entry-macro.S

arch/arm/Kconfig

@@ -493,40 +493,16 @@ config ARCH_DOVE
 	select CPU_PJ4
 	select GENERIC_CLOCKEVENTS
 	select MIGHT_HAVE_PCI
+	select MULTI_IRQ_HANDLER
 	select MVEBU_MBUS
 	select PINCTRL
 	select PINCTRL_DOVE
 	select PLAT_ORION_LEGACY
+	select SPARSE_IRQ
+	select PM_GENERIC_DOMAINS if PM
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	select MULTI_IRQ_HANDLER
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
 config ARCH_KS8695
 	bool "Micrel/Kendin KS8695"
 	select ARCH_REQUIRE_GPIOLIB

arch/arm/configs/mv78xx0_defconfig

@@ -11,6 +11,9 @@ CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MV78XX0=y
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y

arch/arm/configs/orion5x_defconfig

@@ -13,6 +13,9 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PARTITION_ADVANCED=y
 CONFIG_BSD_DISKLABEL=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V6 is not set
+# CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_ORION5X=y
 CONFIG_ARCH_ORION5X_DT=y
 CONFIG_MACH_DB88F5281=y

arch/arm/mach-dove/cm-a510.c

@@ -88,6 +88,7 @@ static void __init cm_a510_init(void)
 
 MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= cm_a510_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,

arch/arm/mach-dove/common.c

@@ -16,6 +16,7 @@
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_device.h>
+#include <linux/soc/dove/pmu.h>
 #include <asm/hardware/cache-tauros2.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -375,6 +376,47 @@ void __init dove_setup_cpu_wins(void)
 				    DOVE_SCRATCHPAD_SIZE);
 }
 
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
+static void __init __maybe_unused orion_wdt_init(void)
+{
+	platform_device_register(&orion_wdt_device);
+}
+
+static const struct dove_pmu_domain_initdata pmu_domains[] __initconst = {
+	{
+		.pwr_mask = PMU_PWR_VPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_VIDEO_MASK,
+		.iso_mask = PMU_ISO_VIDEO_MASK,
+		.name = "vpu-domain",
+	}, {
+		.pwr_mask = PMU_PWR_GPU_PWR_DWN_MASK,
+		.rst_mask = PMU_SW_RST_GPU_MASK,
+		.iso_mask = PMU_ISO_GPU_MASK,
+		.name = "gpu-domain",
+	}, {
+		/* sentinel */
+	},
+};
+
+static const struct dove_pmu_initdata pmu_data __initconst = {
+	.pmc_base = DOVE_PMU_VIRT_BASE,
+	.pmu_base = DOVE_PMU_VIRT_BASE + 0x8000,
+	.irq = IRQ_DOVE_PMU,
+	.irq_domain_start = IRQ_DOVE_PMU_START,
+	.domains = pmu_domains,
+};
+
 void __init dove_init(void)
 {
 	pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n",
@@ -389,6 +431,7 @@ void __init dove_init(void)
 	dove_clk_init();
 
 	/* internal devices that every board has */
+	dove_init_pmu_legacy(&pmu_data);
 	dove_rtc_init();
 	dove_xor0_init();
 	dove_xor1_init();

arch/arm/mach-dove/dove-db-setup.c

@@ -94,6 +94,7 @@ static void __init dove_db_init(void)
 
 MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.atag_offset	= 0x100,
+	.nr_irqs	= DOVE_NR_IRQS,
 	.init_machine	= dove_db_init,
 	.map_io		= dove_map_io,
 	.init_early	= dove_init_early,

arch/arm/mach-dove/include/mach/dove.h

@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_DOVE_H
 #define __ASM_ARCH_DOVE_H
 
+#include <mach/irqs.h>
+
 /*
  * Marvell Dove address maps.
  *

arch/arm/mach-dove/include/mach/entry-macro.S

@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Dove platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #32
-	ands	\irqstat, \irqstat, \tmp
-
-	@ if no low interrupts set, check high interrupts
-	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	moveq	\irqnr, #64
-	andeqs	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm

arch/arm/mach-dove/include/mach/irqs.h

@@ -90,7 +90,7 @@
 #define NR_PMU_IRQS		7
 #define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
 
-#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+#define DOVE_NR_IRQS		(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
 
 
 #endif

arch/arm/mach-dove/include/mach/pm.h

@@ -51,22 +51,14 @@
 #define  CLOCK_GATING_GIGA_PHY_MASK	(1 << CLOCK_GATING_BIT_GIGA_PHY)
 
 #define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
-#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
 
-static inline int pmu_to_irq(int pin)
-{
-	if (pin < NR_PMU_IRQS)
-		return pin + IRQ_DOVE_PMU_START;
+#define  PMU_SW_RST_VIDEO_MASK		BIT(16)
+#define  PMU_SW_RST_GPU_MASK		BIT(18)
 
-	return -EINVAL;
-}
+#define  PMU_PWR_GPU_PWR_DWN_MASK	BIT(2)
+#define  PMU_PWR_VPU_PWR_DWN_MASK	BIT(3)
 
-static inline int irq_to_pmu(int irq)
-{
-	if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS)
-		return irq - IRQ_DOVE_PMU_START;
-
-	return -EINVAL;
-}
+#define  PMU_ISO_VIDEO_MASK		BIT(0)
+#define  PMU_ISO_GPU_MASK		BIT(1)
 
 #endif

arch/arm/mach-dove/irq.c

@@ -7,87 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/io.h>
-#include <asm/mach/arch.h>
+#include <asm/exception.h>
 #include <plat/irq.h>
-#include <asm/mach/irq.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 
-static void pmu_irq_mask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u &= ~(1 << (pin & 31));
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_unmask(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	u = readl(PMU_INTERRUPT_MASK);
-	u |= 1 << (pin & 31);
-	writel(u, PMU_INTERRUPT_MASK);
-}
-
-static void pmu_irq_ack(struct irq_data *d)
-{
-	int pin = irq_to_pmu(d->irq);
-	u32 u;
-
-	/*
-	 * The PMU mask register is not RW0C: it is RW.  This means that
-	 * the bits take whatever value is written to them; if you write
-	 * a '1', you will set the interrupt.
-	 *
-	 * Unfortunately this means there is NO race free way to clear
-	 * these interrupts.
-	 *
-	 * So, let's structure the code so that the window is as small as
-	 * possible.
-	 */
-	u = ~(1 << (pin & 31));
-	u &= readl_relaxed(PMU_INTERRUPT_CAUSE);
-	writel_relaxed(u, PMU_INTERRUPT_CAUSE);
-}
-
-static struct irq_chip pmu_irq_chip = {
-	.name		= "pmu_irq",
-	.irq_mask	= pmu_irq_mask,
-	.irq_unmask	= pmu_irq_unmask,
-	.irq_ack	= pmu_irq_ack,
-};
-
-static void pmu_irq_handler(struct irq_desc *desc)
-{
-	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
-	unsigned int irq;
-
-	cause &= readl(PMU_INTERRUPT_MASK);
-	if (cause == 0) {
-		do_bad_IRQ(desc);
-		return;
-	}
-
-	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
-		if (!(cause & (1 << irq)))
-			continue;
-		irq = pmu_to_irq(irq);
-		generic_handle_irq(irq);
-	}
-}
-
 static int __initdata gpio0_irqs[4] = {
 	IRQ_DOVE_GPIO_0_7,
 	IRQ_DOVE_GPIO_8_15,
@@ -109,14 +37,6 @@ static int __initdata gpio2_irqs[4] = {
 	0,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 static void __iomem *dove_irq_base = IRQ_VIRT_BASE;
 
 static asmlinkage void
@@ -139,18 +59,13 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init dove_init_irq(void)
 {
-	int i;
-
 	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-71.
@@ -163,17 +78,4 @@ void __init dove_init_irq(void)
 
 	orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0,
 			IRQ_DOVE_GPIO_START + 64, gpio2_irqs);
-
-	/*
-	 * Mask and clear PMU interrupts
-	 */
-	writel(0, PMU_INTERRUPT_MASK);
-	writel(0, PMU_INTERRUPT_CAUSE);
-
-	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
-		irq_set_chip_and_handler(i, &pmu_irq_chip, handle_level_irq);
-		irq_set_status_flags(i, IRQ_LEVEL);
-		irq_clear_status_flags(i, IRQ_NOREQUEST);
-	}
-	irq_set_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
 }

arch/arm/mach-mv78xx0/Kconfig

@@ -1,6 +1,15 @@
-if ARCH_MV78XX0
+menuconfig ARCH_MV78XX0
+	bool "Marvell MV78xx0" if ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell MV78xx0 series SoCs:
+	  MV781x0, MV782x0.
 
-menu "Marvell MV78xx0 Implementations"
+if ARCH_MV78XX0
 
 config MACH_DB78X00_BP
 	bool "Marvell DB-78x00-BP Development Board"
@@ -20,6 +29,4 @@ config MACH_TERASTATION_WXL
 	  Say 'Y' here if you want your kernel to support the
 	  Buffalo WXL Nas.
 
-endmenu
-
 endif

arch/arm/mach-mv78xx0/Makefile

@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o mpp.o irq.o pcie.o
 obj-$(CONFIG_MACH_DB78X00_BP)	+= db78x00-bp-setup.o
 obj-$(CONFIG_MACH_RD78X00_MASA)	+= rd78x00-masa-setup.o

arch/arm/mach-mv78xx0/include/mach/bridge-regs.h → arch/arm/mach-mv78xx0/bridge-regs.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
- *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
@@ -9,7 +7,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 
 #define CPU_CONTROL		(BRIDGE_VIRT_BASE + 0x0104)
 #define L2_WRITETHROUGH		0x00020000

arch/arm/mach-mv78xx0/buffalo-wxl-setup.c

@@ -17,9 +17,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -146,6 +146,7 @@ subsys_initcall(wxl_pci_init);
 MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
 	/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= wxl_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,

arch/arm/mach-mv78xx0/common.c

@@ -18,13 +18,13 @@
 #include <asm/hardware/cache-feroceon-l2.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/mv78xx0.h>
-#include <mach/bridge-regs.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <plat/time.h>
 #include <plat/common.h>
 #include <plat/addr-map.h>
+#include "mv78xx0.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static int get_tclk(void);

arch/arm/mach-mv78xx0/db78x00-bp-setup.c

@@ -15,9 +15,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -94,6 +94,7 @@ subsys_initcall(db78x00_pci_init);
 MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= db78x00_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,

arch/arm/mach-mv78xx0/include/mach/entry-macro.S

@@ -1,41 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell MV78xx0 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =IRQ_VIRT_BASE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	@ check low interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
-	mov	\irqnr, #31
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no low interrupts set, check high interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
-	mov	\irqnr, #63
-	ands	\irqstat, \irqstat, \tmp
-	bne	1001f
-
-	@ if no high interrupts set, check error interrupts
-	ldr	\irqstat, [\base, #IRQ_CAUSE_ERR_OFF]
-	ldr	\tmp, [\base, #IRQ_MASK_ERR_OFF]
-	mov	\irqnr, #95
-	ands	\irqstat, \irqstat, \tmp
-
-	@ find first active interrupt source
-1001:	clzne	\irqstat, \irqstat
-	subne	\irqnr, \irqnr, \irqstat
-	.endm

arch/arm/mach-mv78xx0/include/mach/hardware.h

@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/hardware.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "mv78xx0.h"
-
-#endif

arch/arm/mach-mv78xx0/include/mach/uncompress.h

@@ -1,46 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/mv78xx0.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-mv78xx0/irq.c

@@ -11,9 +11,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
+#include <asm/exception.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -23,12 +24,44 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_MV78XX0_GPIO_24_31,
 };
 
+static void __iomem *mv78xx0_irq_base = IRQ_VIRT_BASE;
+
+static asmlinkage void
+__exception_irq_entry mv78xx0_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_LOW_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_LOW_OFF);
+	if (stat) {
+		unsigned int hwirq = __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_HIGH_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_HIGH_OFF);
+	if (stat) {
+		unsigned int hwirq = 32 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+	stat = readl_relaxed(mv78xx0_irq_base + IRQ_CAUSE_ERR_OFF);
+	stat &= readl_relaxed(mv78xx0_irq_base + IRQ_MASK_ERR_OFF);
+	if (stat) {
+		unsigned int hwirq = 64 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+
 void __init mv78xx0_init_irq(void)
 {
 	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
 	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 	orion_irq_init(64, IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF);
 
+	set_handle_irq(mv78xx0_legacy_handle_irq);
+
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.  (The GPIO interrupt mask
 	 * registers for core #1 are at an offset of 0x18 from those of

arch/arm/mach-mv78xx0/include/mach/irqs.h → arch/arm/mach-mv78xx0/irqs.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/irqs.h
- *
  * IRQ definitions for Marvell MV78xx0 SoCs
  *
  * This file is licensed under the terms of the GNU General Public
@@ -88,7 +86,7 @@
 #define IRQ_MV78XX0_GPIO_START	96
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+#define MV78XX0_NR_IRQS		(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif

arch/arm/mach-mv78xx0/mpp.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <plat/mpp.h>
-#include <mach/hardware.h>
+#include "mv78xx0.h"
 #include "common.h"
 #include "mpp.h"
 

arch/arm/mach-mv78xx0/include/mach/mv78xx0.h → arch/arm/mach-mv78xx0/mv78xx0.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
- *
  * Generic definitions for Marvell MV78xx0 SoC flavors:
  *  MV781x0 and MV782x0.
  *
@@ -12,6 +10,8 @@
 #ifndef __ASM_ARCH_MV78XX0_H
 #define __ASM_ARCH_MV78XX0_H
 
+#include "irqs.h"
+
 /*
  * Marvell MV78xx0 address maps.
  *

arch/arm/mach-mv78xx0/pcie.c

@@ -15,7 +15,7 @@
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
-#include <mach/mv78xx0.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 #define MV78XX0_MBUS_PCIE_MEM_TARGET(port, lane) ((port) ? 8 : 4)

arch/arm/mach-mv78xx0/rd78x00-masa-setup.c

@@ -14,9 +14,9 @@
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
-#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include "mv78xx0.h"
 #include "common.h"
 
 static struct mv643xx_eth_platform_data rd78x00_masa_ge00_data = {
@@ -79,6 +79,7 @@ subsys_initcall(rd78x00_pci_init);
 MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= MV78XX0_NR_IRQS,
 	.init_machine	= rd78x00_masa_init,
 	.map_io		= mv78xx0_map_io,
 	.init_early	= mv78xx0_init_early,

arch/arm/mach-orion5x/Kconfig

@@ -1,6 +1,18 @@
-if ARCH_ORION5X
+menuconfig ARCH_ORION5X
+	bool "Marvell Orion"
+	depends on MMU && ARCH_MULTI_V5
+	select ARCH_REQUIRE_GPIOLIB
+	select CPU_FEROCEON
+	select GENERIC_CLOCKEVENTS
+	select MVEBU_MBUS
+	select PCI
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281), Orion-1-90 (6183).
 
-menu "Orion Implementations"
+if ARCH_ORION5X
 
 config ARCH_ORION5X_DT
 	bool "Marvell Orion5x Flattened Device Tree"
@@ -163,6 +175,4 @@ config MACH_RD88F6183AP_GE
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Orion-1-90 (88F6183) AP GE RD.
 
-endmenu
-
 endif

arch/arm/mach-orion5x/Makefile

@@ -1,3 +1,5 @@
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/plat-orion/include
+
 obj-y				+= common.o pci.o irq.o mpp.o
 obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
 obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o

arch/arm/mach-orion5x/board-d2net.c

@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie d2 Network Info

arch/arm/mach-orion5x/board-dt.c

@@ -20,10 +20,10 @@
 #include <asm/system_misc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include <plat/time.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {

arch/arm/mach-orion5x/board-mss2.c

@@ -17,8 +17,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
-#include <mach/bridge-regs.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
 #include "common.h"
 
 /*****************************************************************************

arch/arm/mach-orion5x/board-rd88f5182.c

@@ -18,8 +18,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info

arch/arm/mach-orion5x/include/mach/bridge-regs.h → arch/arm/mach-orion5x/bridge-regs.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/bridge-regs.h
- *
  * Orion CPU Bridge Registers
  *
  * This file is licensed under the terms of the GNU General Public
@@ -11,7 +9,7 @@
 #ifndef __ASM_ARCH_BRIDGE_REGS_H
 #define __ASM_ARCH_BRIDGE_REGS_H
 
-#include <mach/orion5x.h>
+#include "orion5x.h"
 
 #define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
 

arch/arm/mach-orion5x/common.c

@@ -27,14 +27,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include <linux/platform_data/usb-ehci-orion.h>
 #include <plat/time.h>
 #include <plat/common.h>
+
+#include "bridge-regs.h"
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * I/O Address Mapping
@@ -184,9 +184,21 @@ static void __init orion5x_crypto_init(void)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
 static void __init orion5x_wdt_init(void)
 {
-	orion_wdt_init();
+	platform_device_register(&orion_wdt_device);
 }
 
 

arch/arm/mach-orion5x/db88f5281-setup.c

@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * DB-88F5281 on board devices
@@ -369,6 +369,7 @@ static void __init db88f5281_init(void)
 MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
 	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= db88f5281_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/dns323-setup.c

@@ -33,8 +33,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <asm/system_info.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -666,6 +666,7 @@ static void __init dns323_init(void)
 MACHINE_START(DNS323, "D-Link DNS-323")
 	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= dns323_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/include/mach/entry-macro.S

@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Orion platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
-	.macro  get_irqnr_preamble, base, tmp
-	ldr	\base, =MAIN_IRQ_CAUSE
-	.endm
-
-	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\irqstat, [\base, #0]		@ main cause
-	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
-	mov	\irqnr, #0			@ default irqnr
-	@ find cause bits that are unmasked
-	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
-	clzne	\irqnr,	\irqstat		@ calc irqnr
-	rsbne	\irqnr, \irqnr, #32
-	.endm

arch/arm/mach-orion5x/include/mach/hardware.h

@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "orion5x.h"
-
-#endif

arch/arm/mach-orion5x/include/mach/uncompress.h

@@ -1,48 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/uncompress.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/orion5x.h>
-
-#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
-	unsigned char *base = SERIAL_BASE;
-	int i;
-
-	for (i = 0; i < 0x1000; i++) {
-		if (base[UART_LSR << 2] & UART_LSR_THRE)
-			break;
-		barrier();
-	}
-
-	base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
-	unsigned char *base = SERIAL_BASE;
-	unsigned char mask;
-	int i;
-
-	mask = UART_LSR_TEMT | UART_LSR_THRE;
-
-	for (i = 0; i < 0x1000; i++) {
-		if ((base[UART_LSR << 2] & mask) == mask)
-			break;
-		barrier();
-	}
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()

arch/arm/mach-orion5x/irq.c

@@ -13,10 +13,10 @@
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <mach/bridge-regs.h>
 #include <plat/orion-gpio.h>
 #include <plat/irq.h>
 #include <asm/exception.h>
+#include "bridge-regs.h"
 #include "common.h"
 
 static int __initdata gpio0_irqs[4] = {
@@ -26,14 +26,6 @@ static int __initdata gpio0_irqs[4] = {
 	IRQ_ORION5X_GPIO_24_31,
 };
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
-/*
- * Compiling with both non-DT and DT support enabled, will
- * break asm irq handler used by non-DT boards. Therefore,
- * we provide a C-style irq handler even for non-DT boards,
- * if MULTI_IRQ_HANDLER is set.
- */
-
 asmlinkage void
 __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 {
@@ -47,15 +39,12 @@ __exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
 		return;
 	}
 }
-#endif
 
 void __init orion5x_init_irq(void)
 {
 	orion_irq_init(1, MAIN_IRQ_MASK);
 
-#ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(orion5x_legacy_handle_irq);
-#endif
 
 	/*
 	 * Initialize gpiolib for GPIOs 0-31.

arch/arm/mach-orion5x/include/mach/irqs.h → arch/arm/mach-orion5x/irqs.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/irqs.h
- *
  * IRQ definitions for Orion SoC
  *
  *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
@@ -54,7 +52,7 @@
 #define IRQ_ORION5X_GPIO_START	33
 #define NR_GPIO_IRQS		32
 
-#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+#define ORION5X_NR_IRQS		(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
 
 
 #endif

arch/arm/mach-orion5x/kurobox_pro-setup.c

@@ -23,10 +23,10 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include <linux/platform_data/mtd-orion_nand.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * KUROBOX-PRO Info
@@ -383,6 +383,7 @@ static void __init kurobox_pro_init(void)
 MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,
@@ -397,6 +398,7 @@ MACHINE_END
 MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= kurobox_pro_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/ls-chl-setup.c

@@ -22,9 +22,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-CHL Info
@@ -320,6 +320,7 @@ static void __init lschl_init(void)
 MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
 	/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= lschl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/ls_hgl-setup.c

@@ -21,9 +21,9 @@
 #include <linux/gpio.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Linkstation LS-HGL Info
@@ -267,6 +267,7 @@ static void __init ls_hgl_init(void)
 MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
 	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ls_hgl_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/mpp.c

@@ -11,8 +11,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
 #include <plat/mpp.h>
+#include "orion5x.h"
 #include "mpp.h"
 #include "common.h"
 

arch/arm/mach-orion5x/mv2120-setup.c

@@ -21,9 +21,9 @@
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 #define MV2120_NOR_BOOT_BASE	0xf4000000
 #define MV2120_NOR_BOOT_SIZE	SZ_512K
@@ -232,6 +232,7 @@ static void __init mv2120_init(void)
 MACHINE_START(MV2120, "HP Media Vault mv2120")
 	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= mv2120_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/net2big-setup.c

@@ -24,10 +24,10 @@
 #include <linux/delay.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/orion5x.h>
 #include <plat/orion-gpio.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * LaCie 2Big Network Info
@@ -423,6 +423,7 @@ static void __init net2big_init(void)
 /* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
 MACHINE_START(NET2BIG, "LaCie 2Big Network")
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= net2big_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/include/mach/orion5x.h → arch/arm/mach-orion5x/orion5x.h

@@ -1,6 +1,4 @@
 /*
- * arch/arm/mach-orion5x/include/mach/orion5x.h
- *
  * Generic definitions of Orion SoC flavors:
  *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
  *
@@ -14,6 +12,8 @@
 #ifndef __ASM_ARCH_ORION5X_H
 #define __ASM_ARCH_ORION5X_H
 
+#include "irqs.h"
+
 /*****************************************************************************
  * Orion Address Maps
  *

arch/arm/mach-orion5x/pci.c

@@ -19,8 +19,8 @@
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>
 #include <plat/addr-map.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Orion has one PCIe controller and one PCI controller.

arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c

@@ -20,9 +20,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L FXO Info
@@ -169,6 +169,7 @@ subsys_initcall(rd88f5181l_fxo_pci_init);
 MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
 	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_fxo_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/rd88f5181l-ge-setup.c

@@ -21,9 +21,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5181L GE Info
@@ -181,6 +181,7 @@ subsys_initcall(rd88f5181l_ge_pci_init);
 MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5181l_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/rd88f5182-setup.c

@@ -23,9 +23,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * RD-88F5182 Info
@@ -281,6 +281,7 @@ static void __init rd88f5182_init(void)
 MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
 	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f5182_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c

@@ -22,8 +22,8 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
+#include "orion5x.h"
 
 static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
 	.phy_addr	= -1,
@@ -119,6 +119,7 @@ subsys_initcall(rd88f6183ap_ge_pci_init);
 MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= rd88f6183ap_ge_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/terastation_pro2-setup.c

@@ -22,9 +22,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 
 /*****************************************************************************
  * Terastation Pro 2/Live Info
@@ -359,6 +359,7 @@ static void __init tsp2_init(void)
 MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= tsp2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/ts209-setup.c

@@ -25,9 +25,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 #define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
@@ -324,6 +324,7 @@ static void __init qnap_ts209_init(void)
 MACHINE_START(TS209, "QNAP TS-109/TS-209")
 	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts209_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/ts409-setup.c

@@ -27,9 +27,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "tsx09-common.h"
 
 /*****************************************************************************
@@ -313,6 +313,7 @@ static void __init qnap_ts409_init(void)
 MACHINE_START(TS409, "QNAP TS-409")
 	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= qnap_ts409_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/ts78xx-setup.c

@@ -23,9 +23,9 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
+#include "orion5x.h"
 #include "ts78xx-fpga.h"
 
 /*****************************************************************************
@@ -615,6 +615,7 @@ static void __init ts78xx_init(void)
 MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
 	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= ts78xx_init,
 	.map_io		= ts78xx_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/tsx09-common.c

@@ -15,7 +15,7 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/timex.h>
 #include <linux/serial_reg.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "tsx09-common.h"
 #include "common.h"
 

arch/arm/mach-orion5x/wnr854t-setup.c

@@ -19,7 +19,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -174,6 +174,7 @@ subsys_initcall(wnr854t_pci_init);
 MACHINE_START(WNR854T, "Netgear WNR854T")
 	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wnr854t_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/mach-orion5x/wrt350n-v2-setup.c

@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <mach/orion5x.h>
+#include "orion5x.h"
 #include "common.h"
 #include "mpp.h"
 
@@ -262,6 +262,7 @@ subsys_initcall(wrt350n_v2_pci_init);
 MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
 	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
 	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
 	.init_machine	= wrt350n_v2_init,
 	.map_io		= orion5x_map_io,
 	.init_early	= orion5x_init_early,

arch/arm/plat-orion/common.c

@@ -21,7 +21,6 @@
 #include <net/dsa.h>
 #include <linux/platform_data/dma-mv_xor.h>
 #include <linux/platform_data/usb-ehci-orion.h>
-#include <mach/bridge-regs.h>
 #include <plat/common.h>
 
 /* Create a clkdev entry for a given device/clk */
@@ -588,26 +587,6 @@ void __init orion_spi_1_init(unsigned long mapbase)
 	platform_device_register(&orion_spi_1);
 }
 
-/*****************************************************************************
- * Watchdog
- ****************************************************************************/
-static struct resource orion_wdt_resource[] = {
-		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
-		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
-};
-
-static struct platform_device orion_wdt_device = {
-	.name		= "orion_wdt",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
-	.resource	= orion_wdt_resource,
-};
-
-void __init orion_wdt_init(void)
-{
-	platform_device_register(&orion_wdt_device);
-}
-
 /*****************************************************************************
  * XOR
  ****************************************************************************/

arch/arm/plat-orion/include/plat/common.h

@@ -75,8 +75,6 @@ void __init orion_spi_init(unsigned long mapbase);
 
 void __init orion_spi_1_init(unsigned long mapbase);
 
-void __init orion_wdt_init(void);
-
 void __init orion_xor0_init(unsigned long mapbase_low,
 			    unsigned long mapbase_high,
 			    unsigned long irq_0,

arch/arm/plat-orion/irq.c

@@ -18,7 +18,6 @@
 #include <asm/exception.h>
 #include <plat/irq.h>
 #include <plat/orion-gpio.h>
-#include <mach/bridge-regs.h>
 
 void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr)
 {

arch/arm/plat-orion/mpp.c

@@ -13,7 +13,6 @@
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <mach/hardware.h>
 #include <plat/orion-gpio.h>
 #include <plat/mpp.h>
 

drivers/soc/Makefile

@@ -3,6 +3,7 @@
 #
 
 obj-$(CONFIG_SOC_BRCMSTB)	+= brcmstb/
+obj-$(CONFIG_ARCH_DOVE)		+= dove/
 obj-$(CONFIG_MACH_DOVE)		+= dove/
 obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/

drivers/soc/dove/pmu.c

@@ -305,6 +305,49 @@ static int __init dove_init_pmu_irq(struct pmu_data *pmu, int irq)
 	return 0;
 }
 
+int __init dove_init_pmu_legacy(const struct dove_pmu_initdata *initdata)
+{
+	const struct dove_pmu_domain_initdata *domain_initdata;
+	struct pmu_data *pmu;
+	int ret;
+
+	pmu = kzalloc(sizeof(*pmu), GFP_KERNEL);
+	if (!pmu)
+		return -ENOMEM;
+
+	spin_lock_init(&pmu->lock);
+	pmu->pmc_base = initdata->pmc_base;
+	pmu->pmu_base = initdata->pmu_base;
+
+	pmu_reset_init(pmu);
+	for (domain_initdata = initdata->domains; domain_initdata->name;
+	     domain_initdata++) {
+		struct pmu_domain *domain;
+
+		domain = kzalloc(sizeof(*domain), GFP_KERNEL);
+		if (domain) {
+			domain->pmu = pmu;
+			domain->pwr_mask = domain_initdata->pwr_mask;
+			domain->rst_mask = domain_initdata->rst_mask;
+			domain->iso_mask = domain_initdata->iso_mask;
+			domain->base.name = domain_initdata->name;
+
+			__pmu_domain_register(domain, NULL);
+		}
+	}
+
+	ret = dove_init_pmu_irq(pmu, initdata->irq);
+	if (ret)
+		pr_err("dove_init_pmu_irq() failed: %d\n", ret);
+
+	if (pmu->irq_domain)
+		irq_domain_associate_many(pmu->irq_domain,
+					  initdata->irq_domain_start,
+					  0, NR_PMU_IRQS);
+
+	return 0;
+}
+
 /*
  * pmu: power-manager@d0000 {
  *	compatible = "marvell,dove-pmu";

include/linux/soc/dove/pmu.h

@@ -1,6 +1,25 @@
 #ifndef LINUX_SOC_DOVE_PMU_H
 #define LINUX_SOC_DOVE_PMU_H
 
+#include <linux/types.h>
+
+struct dove_pmu_domain_initdata {
+	u32 pwr_mask;
+	u32 rst_mask;
+	u32 iso_mask;
+	const char *name;
+};
+
+struct dove_pmu_initdata {
+	void __iomem *pmc_base;
+	void __iomem *pmu_base;
+	int irq;
+	int irq_domain_start;
+	const struct dove_pmu_domain_initdata *domains;
+};
+
+int dove_init_pmu_legacy(const struct dove_pmu_initdata *);
+
 int dove_init_pmu(void);
 
 #endif