drm/i915: Implement chv display PHY lane stagger setup

Set up the chv display PHY lane stagger registers according to
"Programming Guide for 1273 CHV eDP/DP/HDMI Display PHY" v1.04

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by:  Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_reg.h

@@ -961,6 +961,7 @@ enum skl_disp_power_wells {
 
 #define _VLV_PCS_DW11_CH0		0x822c
 #define _VLV_PCS_DW11_CH1		0x842c
+#define   DPIO_TX2_STAGGER_MASK(x)	((x)<<24)
 #define   DPIO_LANEDESKEW_STRAP_OVRD	(1<<3)
 #define   DPIO_LEFT_TXFIFO_RST_MASTER	(1<<1)
 #define   DPIO_RIGHT_TXFIFO_RST_MASTER	(1<<0)
@@ -973,8 +974,20 @@ enum skl_disp_power_wells {
 #define VLV_PCS01_DW11(ch) _PORT(ch, _VLV_PCS01_DW11_CH0, _VLV_PCS01_DW11_CH1)
 #define VLV_PCS23_DW11(ch) _PORT(ch, _VLV_PCS23_DW11_CH0, _VLV_PCS23_DW11_CH1)
 
+#define _VLV_PCS01_DW12_CH0		0x0230
+#define _VLV_PCS23_DW12_CH0		0x0430
+#define _VLV_PCS01_DW12_CH1		0x2630
+#define _VLV_PCS23_DW12_CH1		0x2830
+#define VLV_PCS01_DW12(ch) _PORT(ch, _VLV_PCS01_DW12_CH0, _VLV_PCS01_DW12_CH1)
+#define VLV_PCS23_DW12(ch) _PORT(ch, _VLV_PCS23_DW12_CH0, _VLV_PCS23_DW12_CH1)
+
 #define _VLV_PCS_DW12_CH0		0x8230
 #define _VLV_PCS_DW12_CH1		0x8430
+#define   DPIO_TX2_STAGGER_MULT(x)	((x)<<20)
+#define   DPIO_TX1_STAGGER_MULT(x)	((x)<<16)
+#define   DPIO_TX1_STAGGER_MASK(x)	((x)<<8)
+#define   DPIO_LANESTAGGER_STRAP_OVRD	(1<<6)
+#define   DPIO_LANESTAGGER_STRAP(x)	((x)<<0)
 #define VLV_PCS_DW12(ch) _PORT(ch, _VLV_PCS_DW12_CH0, _VLV_PCS_DW12_CH1)
 
 #define _VLV_PCS_DW14_CH0		0x8238

drivers/gpu/drm/i915/intel_dp.c

@@ -2732,7 +2732,7 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
 		to_intel_crtc(encoder->base.crtc);
 	enum dpio_channel ch = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
-	int data, i;
+	int data, i, stagger;
 	u32 val;
 
 	mutex_lock(&dev_priv->dpio_lock);
@@ -2772,7 +2772,38 @@ static void chv_pre_enable_dp(struct intel_encoder *encoder)
 	}
 
 	/* Data lane stagger programming */
-	/* FIXME: Fix up value only after power analysis */
+	if (intel_crtc->config->port_clock > 270000)
+		stagger = 0x18;
+	else if (intel_crtc->config->port_clock > 135000)
+		stagger = 0xd;
+	else if (intel_crtc->config->port_clock > 67500)
+		stagger = 0x7;
+	else if (intel_crtc->config->port_clock > 33750)
+		stagger = 0x4;
+	else
+		stagger = 0x2;
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
+	val |= DPIO_TX2_STAGGER_MASK(0x1f);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+	val |= DPIO_TX2_STAGGER_MASK(0x1f);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
+		       DPIO_LANESTAGGER_STRAP(stagger) |
+		       DPIO_LANESTAGGER_STRAP_OVRD |
+		       DPIO_TX1_STAGGER_MASK(0x1f) |
+		       DPIO_TX1_STAGGER_MULT(6) |
+		       DPIO_TX2_STAGGER_MULT(0));
+
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
+		       DPIO_LANESTAGGER_STRAP(stagger) |
+		       DPIO_LANESTAGGER_STRAP_OVRD |
+		       DPIO_TX1_STAGGER_MASK(0x1f) |
+		       DPIO_TX1_STAGGER_MULT(7) |
+		       DPIO_TX2_STAGGER_MULT(5));
 
 	mutex_unlock(&dev_priv->dpio_lock);
 

drivers/gpu/drm/i915/intel_hdmi.c

@@ -1487,7 +1487,7 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 		&intel_crtc->config->base.adjusted_mode;
 	enum dpio_channel ch = vlv_dport_to_channel(dport);
 	int pipe = intel_crtc->pipe;
-	int data, i;
+	int data, i, stagger;
 	u32 val;
 
 	mutex_lock(&dev_priv->dpio_lock);
@@ -1527,7 +1527,38 @@ static void chv_hdmi_pre_enable(struct intel_encoder *encoder)
 	}
 
 	/* Data lane stagger programming */
-	/* FIXME: Fix up value only after power analysis */
+	if (intel_crtc->config->port_clock > 270000)
+		stagger = 0x18;
+	else if (intel_crtc->config->port_clock > 135000)
+		stagger = 0xd;
+	else if (intel_crtc->config->port_clock > 67500)
+		stagger = 0x7;
+	else if (intel_crtc->config->port_clock > 33750)
+		stagger = 0x4;
+	else
+		stagger = 0x2;
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW11(ch));
+	val |= DPIO_TX2_STAGGER_MASK(0x1f);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW11(ch), val);
+
+	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS23_DW11(ch));
+	val |= DPIO_TX2_STAGGER_MASK(0x1f);
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW11(ch), val);
+
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS01_DW12(ch),
+		       DPIO_LANESTAGGER_STRAP(stagger) |
+		       DPIO_LANESTAGGER_STRAP_OVRD |
+		       DPIO_TX1_STAGGER_MASK(0x1f) |
+		       DPIO_TX1_STAGGER_MULT(6) |
+		       DPIO_TX2_STAGGER_MULT(0));
+
+	vlv_dpio_write(dev_priv, pipe, VLV_PCS23_DW12(ch),
+		       DPIO_LANESTAGGER_STRAP(stagger) |
+		       DPIO_LANESTAGGER_STRAP_OVRD |
+		       DPIO_TX1_STAGGER_MASK(0x1f) |
+		       DPIO_TX1_STAGGER_MULT(7) |
+		       DPIO_TX2_STAGGER_MULT(5));
 
 	/* Clear calc init */
 	val = vlv_dpio_read(dev_priv, pipe, VLV_PCS01_DW10(ch));