Input: pm8xxx-vib - parametrize the driver

In order to prepare this driver to support other vibrators of the same
kind, move some hardcoded values to a structure holding register
parameters (address, mask, shit of the control register).

Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

drivers/input/misc/pm8xxx-vibrator.c

@@ -14,36 +14,47 @@
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 
-#define VIB_DRV			0x4A
-
-#define VIB_DRV_SEL_MASK	0xf8
-#define VIB_DRV_SEL_SHIFT	0x03
-#define VIB_DRV_EN_MANUAL_MASK	0xfc
-
 #define VIB_MAX_LEVEL_mV	(3100)
 #define VIB_MIN_LEVEL_mV	(1200)
 #define VIB_MAX_LEVELS		(VIB_MAX_LEVEL_mV - VIB_MIN_LEVEL_mV)
 
 #define MAX_FF_SPEED		0xff
 
+struct pm8xxx_regs {
+	unsigned int drv_addr;
+	unsigned int drv_mask;
+	unsigned int drv_shift;
+	unsigned int drv_en_manual_mask;
+};
+
+static const struct pm8xxx_regs pm8058_regs = {
+	.drv_addr = 0x4A,
+	.drv_mask = 0xf8,
+	.drv_shift = 3,
+	.drv_en_manual_mask = 0xfc,
+};
+
 /**
  * struct pm8xxx_vib - structure to hold vibrator data
  * @vib_input_dev: input device supporting force feedback
  * @work: work structure to set the vibration parameters
  * @regmap: regmap for register read/write
+ * @regs: registers' info
  * @speed: speed of vibration set from userland
  * @active: state of vibrator
  * @level: level of vibration to set in the chip
- * @reg_vib_drv: VIB_DRV register value
+ * @reg_vib_drv: regs->drv_addr register value
  */
 struct pm8xxx_vib {
 	struct input_dev *vib_input_dev;
 	struct work_struct work;
 	struct regmap *regmap;
+	const struct pm8xxx_regs *regs;
 	int speed;
 	int level;
 	bool active;
@@ -59,13 +70,14 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 {
 	int rc;
 	unsigned int val = vib->reg_vib_drv;
+	const struct pm8xxx_regs *regs = vib->regs;
 
 	if (on)
-		val |= ((vib->level << VIB_DRV_SEL_SHIFT) & VIB_DRV_SEL_MASK);
+		val |= (vib->level << regs->drv_shift) & regs->drv_mask;
 	else
-		val &= ~VIB_DRV_SEL_MASK;
+		val &= ~regs->drv_mask;
 
-	rc = regmap_write(vib->regmap, VIB_DRV, val);
+	rc = regmap_write(vib->regmap, regs->drv_addr, val);
 	if (rc < 0)
 		return rc;
 
@@ -80,10 +92,11 @@ static int pm8xxx_vib_set(struct pm8xxx_vib *vib, bool on)
 static void pm8xxx_work_handler(struct work_struct *work)
 {
 	struct pm8xxx_vib *vib = container_of(work, struct pm8xxx_vib, work);
+	const struct pm8xxx_regs *regs = vib->regs;
 	int rc;
 	unsigned int val;
 
-	rc = regmap_read(vib->regmap, VIB_DRV, &val);
+	rc = regmap_read(vib->regmap, regs->drv_addr, &val);
 	if (rc < 0)
 		return;
 
@@ -147,6 +160,7 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	struct input_dev *input_dev;
 	int error;
 	unsigned int val;
+	const struct pm8xxx_regs *regs;
 
 	vib = devm_kzalloc(&pdev->dev, sizeof(*vib), GFP_KERNEL);
 	if (!vib)
@@ -163,16 +177,19 @@ static int pm8xxx_vib_probe(struct platform_device *pdev)
 	INIT_WORK(&vib->work, pm8xxx_work_handler);
 	vib->vib_input_dev = input_dev;
 
+	regs = of_device_get_match_data(&pdev->dev);
+
 	/* operate in manual mode */
-	error = regmap_read(vib->regmap, VIB_DRV, &val);
+	error = regmap_read(vib->regmap, regs->drv_addr, &val);
 	if (error < 0)
 		return error;
 
-	val &= ~VIB_DRV_EN_MANUAL_MASK;
-	error = regmap_write(vib->regmap, VIB_DRV, val);
+	val &= regs->drv_en_manual_mask;
+	error = regmap_write(vib->regmap, regs->drv_addr, val);
 	if (error < 0)
 		return error;
 
+	vib->regs = regs;
 	vib->reg_vib_drv = val;
 
 	input_dev->name = "pm8xxx_vib_ffmemless";
@@ -212,8 +229,8 @@ static int __maybe_unused pm8xxx_vib_suspend(struct device *dev)
 static SIMPLE_DEV_PM_OPS(pm8xxx_vib_pm_ops, pm8xxx_vib_suspend, NULL);
 
 static const struct of_device_id pm8xxx_vib_id_table[] = {
-	{ .compatible = "qcom,pm8058-vib" },
-	{ .compatible = "qcom,pm8921-vib" },
+	{ .compatible = "qcom,pm8058-vib", .data = &pm8058_regs },
+	{ .compatible = "qcom,pm8921-vib", .data = &pm8058_regs },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_vib_id_table);