can: sja1000: add support for Elcus CAN200PCI

This patch adds support for Elcus CAN200PCI card.

Signed-off-by: Oleg Moroz <oleg.moroz@mcc.vniiem.ru>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/sja1000/plx_pci.c

@@ -44,7 +44,8 @@ MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
 			"esd CAN-PCI/PMC/266, "
 			"esd CAN-PCIe/2000, "
 			"Connect Tech Inc. CANpro/104-Plus Opto (CRG001), "
-			"IXXAT PC-I 04/PCI")
+			"IXXAT PC-I 04/PCI, "
+			"ELCUS CAN-200-PCI")
 MODULE_LICENSE("GPL v2");
 
 #define PLX_PCI_MAX_CHAN 2
@@ -122,6 +123,11 @@ struct plx_pci_card {
 #define ESD_PCI_SUB_SYS_ID_PCIE2000	0x0200
 #define ESD_PCI_SUB_SYS_ID_PCI104200	0x0501
 
+#define CAN200PCI_DEVICE_ID		0x9030
+#define CAN200PCI_VENDOR_ID		0x10b5
+#define CAN200PCI_SUB_DEVICE_ID		0x0301
+#define CAN200PCI_SUB_VENDOR_ID		0xe1c5
+
 #define IXXAT_PCI_VENDOR_ID		0x10b5
 #define IXXAT_PCI_DEVICE_ID		0x9050
 #define IXXAT_PCI_SUB_SYS_ID		0x2540
@@ -233,6 +239,14 @@ static struct plx_pci_card_info plx_pci_card_info_cti = {
 	/* based on PLX9030 */
 };
 
+static struct plx_pci_card_info plx_pci_card_info_elcus = {
+	"Eclus CAN-200-PCI", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{1, 0x00, 0x00}, { {2, 0x00, 0x80}, {3, 0x00, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9030 */
+};
+
 static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
 	{
 		/* Adlink PCI-7841/cPCI-7841 */
@@ -318,6 +332,13 @@ static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
 		0, 0,
 		(kernel_ulong_t)&plx_pci_card_info_cti
 	},
+	{
+		/* Elcus CAN-200-PCI */
+		CAN200PCI_VENDOR_ID, CAN200PCI_DEVICE_ID,
+		CAN200PCI_SUB_VENDOR_ID, CAN200PCI_SUB_DEVICE_ID,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_elcus
+	},
 	{ 0,}
 };
 MODULE_DEVICE_TABLE(pci, plx_pci_tbl);