Merge tag 'iio-for-4.10d' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Fourth set of IIO new device support, features and cleaups for the 4.10 cycle.

Probably the final set before the merge window unless things get significantly
delayed.

New device support
* STM32 ADC core
  - new driver.  Interesting device with up to 3 ADCs with complex triggering
    options that will follow later. Note split into an 'mfd like' core that
    handles the interrupt sharing etc between the various instances present and
    a per ADC section that is instantiated as many times as needed.
  - device tree bindings.

Cleanups and minor fixes
* st_accel
  - inline per sensor data as the defines don't add any meaning and make it
    much harder to check if a given sensor has the right values.
* hid-magnetometer
  - sort out the associations of the associated attributes with the two types.

Documentation/devicetree/bindings/iio/adc/st,stm32-adc.txt

@@ -0,0 +1,83 @@
+STMicroelectronics STM32 ADC device driver
+
+STM32 ADC is a successive approximation analog-to-digital converter.
+It has several multiplexed input channels. Conversions can be performed
+in single, continuous, scan or discontinuous mode. Result of the ADC is
+stored in a left-aligned or right-aligned 32-bit data register.
+Conversions can be launched in software or using hardware triggers.
+
+The analog watchdog feature allows the application to detect if the input
+voltage goes beyond the user-defined, higher or lower thresholds.
+
+Each STM32 ADC block can have up to 3 ADC instances.
+
+Each instance supports two contexts to manage conversions, each one has its
+own configurable sequence and trigger:
+- regular conversion can be done in sequence, running in background
+- injected conversions have higher priority, and so have the ability to
+  interrupt regular conversion sequence (either triggered in SW or HW).
+  Regular sequence is resumed, in case it has been interrupted.
+
+Contents of a stm32 adc root node:
+-----------------------------------
+Required properties:
+- compatible: Should be "st,stm32f4-adc-core".
+- reg: Offset and length of the ADC block register set.
+- interrupts: Must contain the interrupt for ADC block.
+- clocks: Clock for the analog circuitry (common to all ADCs).
+- clock-names: Must be "adc".
+- interrupt-controller: Identifies the controller node as interrupt-parent
+- vref-supply: Phandle to the vref input analog reference voltage.
+- #interrupt-cells = <1>;
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- A pinctrl state named "default" for each ADC channel may be defined to set
+  inX ADC pins in mode of operation for analog input on external pin.
+
+Contents of a stm32 adc child node:
+-----------------------------------
+An ADC block node should contain at least one subnode, representing an
+ADC instance available on the machine.
+
+Required properties:
+- compatible: Should be "st,stm32f4-adc".
+- reg: Offset of ADC instance in ADC block (e.g. may be 0x0, 0x100, 0x200).
+- clocks: Input clock private to this ADC instance.
+- interrupt-parent: Phandle to the parent interrupt controller.
+- interrupts: IRQ Line for the ADC (e.g. may be 0 for adc@0, 1 for adc@100 or
+  2 for adc@200).
+- st,adc-channels: List of single-ended channels muxed for this ADC.
+  It can have up to 16 channels, numbered from 0 to 15 (resp. for in0..in15).
+- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers" in
+  Documentation/devicetree/bindings/iio/iio-bindings.txt
+
+Example:
+	adc: adc@40012000 {
+		compatible = "st,stm32f4-adc-core";
+		reg = <0x40012000 0x400>;
+		interrupts = <18>;
+		clocks = <&rcc 0 168>;
+		clock-names = "adc";
+		vref-supply = <&reg_vref>;
+		interrupt-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&adc3_in8_pin>;
+
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@0 {
+			compatible = "st,stm32f4-adc";
+			#io-channel-cells = <1>;
+			reg = <0x0>;
+			clocks = <&rcc 0 168>;
+			interrupt-parent = <&adc>;
+			interrupts = <0>;
+			st,adc-channels = <8>;
+		};
+		...
+		other adc child nodes follow...
+	};

drivers/iio/accel/st_accel_core.c

@@ -43,200 +43,6 @@
 #define ST_ACCEL_FS_AVL_200G			200
 #define ST_ACCEL_FS_AVL_400G			400
 
-/* CUSTOM VALUES FOR SENSOR 1 */
-#define ST_ACCEL_1_WAI_EXP			0x33
-#define ST_ACCEL_1_ODR_ADDR			0x20
-#define ST_ACCEL_1_ODR_MASK			0xf0
-#define ST_ACCEL_1_ODR_AVL_1HZ_VAL		0x01
-#define ST_ACCEL_1_ODR_AVL_10HZ_VAL		0x02
-#define ST_ACCEL_1_ODR_AVL_25HZ_VAL		0x03
-#define ST_ACCEL_1_ODR_AVL_50HZ_VAL		0x04
-#define ST_ACCEL_1_ODR_AVL_100HZ_VAL		0x05
-#define ST_ACCEL_1_ODR_AVL_200HZ_VAL		0x06
-#define ST_ACCEL_1_ODR_AVL_400HZ_VAL		0x07
-#define ST_ACCEL_1_ODR_AVL_1600HZ_VAL		0x08
-#define ST_ACCEL_1_FS_ADDR			0x23
-#define ST_ACCEL_1_FS_MASK			0x30
-#define ST_ACCEL_1_FS_AVL_2_VAL			0x00
-#define ST_ACCEL_1_FS_AVL_4_VAL			0x01
-#define ST_ACCEL_1_FS_AVL_8_VAL			0x02
-#define ST_ACCEL_1_FS_AVL_16_VAL		0x03
-#define ST_ACCEL_1_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
-#define ST_ACCEL_1_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
-#define ST_ACCEL_1_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(4000)
-#define ST_ACCEL_1_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(12000)
-#define ST_ACCEL_1_BDU_ADDR			0x23
-#define ST_ACCEL_1_BDU_MASK			0x80
-#define ST_ACCEL_1_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_1_DRDY_IRQ_INT1_MASK		0x10
-#define ST_ACCEL_1_DRDY_IRQ_INT2_MASK		0x08
-#define ST_ACCEL_1_IHL_IRQ_ADDR			0x25
-#define ST_ACCEL_1_IHL_IRQ_MASK			0x02
-#define ST_ACCEL_1_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 2 */
-#define ST_ACCEL_2_WAI_EXP			0x32
-#define ST_ACCEL_2_ODR_ADDR			0x20
-#define ST_ACCEL_2_ODR_MASK			0x18
-#define ST_ACCEL_2_ODR_AVL_50HZ_VAL		0x00
-#define ST_ACCEL_2_ODR_AVL_100HZ_VAL		0x01
-#define ST_ACCEL_2_ODR_AVL_400HZ_VAL		0x02
-#define ST_ACCEL_2_ODR_AVL_1000HZ_VAL		0x03
-#define ST_ACCEL_2_PW_ADDR			0x20
-#define ST_ACCEL_2_PW_MASK			0xe0
-#define ST_ACCEL_2_FS_ADDR			0x23
-#define ST_ACCEL_2_FS_MASK			0x30
-#define ST_ACCEL_2_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_2_FS_AVL_4_VAL			0X01
-#define ST_ACCEL_2_FS_AVL_8_VAL			0x03
-#define ST_ACCEL_2_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1000)
-#define ST_ACCEL_2_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(2000)
-#define ST_ACCEL_2_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(3900)
-#define ST_ACCEL_2_BDU_ADDR			0x23
-#define ST_ACCEL_2_BDU_MASK			0x80
-#define ST_ACCEL_2_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_2_DRDY_IRQ_INT1_MASK		0x02
-#define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
-#define ST_ACCEL_2_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_2_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_2_OD_IRQ_ADDR			0x22
-#define ST_ACCEL_2_OD_IRQ_MASK			0x40
-#define ST_ACCEL_2_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 3 */
-#define ST_ACCEL_3_WAI_EXP			0x40
-#define ST_ACCEL_3_ODR_ADDR			0x20
-#define ST_ACCEL_3_ODR_MASK			0xf0
-#define ST_ACCEL_3_ODR_AVL_3HZ_VAL		0x01
-#define ST_ACCEL_3_ODR_AVL_6HZ_VAL		0x02
-#define ST_ACCEL_3_ODR_AVL_12HZ_VAL		0x03
-#define ST_ACCEL_3_ODR_AVL_25HZ_VAL		0x04
-#define ST_ACCEL_3_ODR_AVL_50HZ_VAL		0x05
-#define ST_ACCEL_3_ODR_AVL_100HZ_VAL		0x06
-#define ST_ACCEL_3_ODR_AVL_200HZ_VAL		0x07
-#define ST_ACCEL_3_ODR_AVL_400HZ_VAL		0x08
-#define ST_ACCEL_3_ODR_AVL_800HZ_VAL		0x09
-#define ST_ACCEL_3_ODR_AVL_1600HZ_VAL		0x0a
-#define ST_ACCEL_3_FS_ADDR			0x24
-#define ST_ACCEL_3_FS_MASK			0x38
-#define ST_ACCEL_3_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_3_FS_AVL_4_VAL			0X01
-#define ST_ACCEL_3_FS_AVL_6_VAL			0x02
-#define ST_ACCEL_3_FS_AVL_8_VAL			0x03
-#define ST_ACCEL_3_FS_AVL_16_VAL		0x04
-#define ST_ACCEL_3_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(61)
-#define ST_ACCEL_3_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(122)
-#define ST_ACCEL_3_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(183)
-#define ST_ACCEL_3_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(244)
-#define ST_ACCEL_3_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(732)
-#define ST_ACCEL_3_BDU_ADDR			0x20
-#define ST_ACCEL_3_BDU_MASK			0x08
-#define ST_ACCEL_3_DRDY_IRQ_ADDR		0x23
-#define ST_ACCEL_3_DRDY_IRQ_INT1_MASK		0x80
-#define ST_ACCEL_3_DRDY_IRQ_INT2_MASK		0x00
-#define ST_ACCEL_3_IHL_IRQ_ADDR			0x23
-#define ST_ACCEL_3_IHL_IRQ_MASK			0x40
-#define ST_ACCEL_3_IG1_EN_ADDR			0x23
-#define ST_ACCEL_3_IG1_EN_MASK			0x08
-#define ST_ACCEL_3_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 4 */
-#define ST_ACCEL_4_WAI_EXP			0x3a
-#define ST_ACCEL_4_ODR_ADDR			0x20
-#define ST_ACCEL_4_ODR_MASK			0x30 /* DF1 and DF0 */
-#define ST_ACCEL_4_ODR_AVL_40HZ_VAL		0x00
-#define ST_ACCEL_4_ODR_AVL_160HZ_VAL		0x01
-#define ST_ACCEL_4_ODR_AVL_640HZ_VAL		0x02
-#define ST_ACCEL_4_ODR_AVL_2560HZ_VAL		0x03
-#define ST_ACCEL_4_PW_ADDR			0x20
-#define ST_ACCEL_4_PW_MASK			0xc0
-#define ST_ACCEL_4_FS_ADDR			0x21
-#define ST_ACCEL_4_FS_MASK			0x80
-#define ST_ACCEL_4_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_4_FS_AVL_6_VAL			0X01
-#define ST_ACCEL_4_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(1024)
-#define ST_ACCEL_4_FS_AVL_6_GAIN		IIO_G_TO_M_S_2(340)
-#define ST_ACCEL_4_BDU_ADDR			0x21
-#define ST_ACCEL_4_BDU_MASK			0x40
-#define ST_ACCEL_4_DRDY_IRQ_ADDR		0x21
-#define ST_ACCEL_4_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_4_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 5 */
-#define ST_ACCEL_5_WAI_EXP			0x3b
-#define ST_ACCEL_5_ODR_ADDR			0x20
-#define ST_ACCEL_5_ODR_MASK			0x80
-#define ST_ACCEL_5_ODR_AVL_100HZ_VAL		0x00
-#define ST_ACCEL_5_ODR_AVL_400HZ_VAL		0x01
-#define ST_ACCEL_5_PW_ADDR			0x20
-#define ST_ACCEL_5_PW_MASK			0x40
-#define ST_ACCEL_5_FS_ADDR			0x20
-#define ST_ACCEL_5_FS_MASK			0x20
-#define ST_ACCEL_5_FS_AVL_2_VAL			0X00
-#define ST_ACCEL_5_FS_AVL_8_VAL			0X01
-/* TODO: check these resulting gain settings, these are not in the datsheet */
-#define ST_ACCEL_5_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(18000)
-#define ST_ACCEL_5_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(72000)
-#define ST_ACCEL_5_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_5_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_5_DRDY_IRQ_INT2_MASK		0x20
-#define ST_ACCEL_5_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_5_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_5_OD_IRQ_ADDR			0x22
-#define ST_ACCEL_5_OD_IRQ_MASK			0x40
-#define ST_ACCEL_5_IG1_EN_ADDR			0x21
-#define ST_ACCEL_5_IG1_EN_MASK			0x08
-#define ST_ACCEL_5_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 6 */
-#define ST_ACCEL_6_WAI_EXP			0x32
-#define ST_ACCEL_6_ODR_ADDR			0x20
-#define ST_ACCEL_6_ODR_MASK			0x18
-#define ST_ACCEL_6_ODR_AVL_50HZ_VAL		0x00
-#define ST_ACCEL_6_ODR_AVL_100HZ_VAL		0x01
-#define ST_ACCEL_6_ODR_AVL_400HZ_VAL		0x02
-#define ST_ACCEL_6_ODR_AVL_1000HZ_VAL		0x03
-#define ST_ACCEL_6_PW_ADDR			0x20
-#define ST_ACCEL_6_PW_MASK			0x20
-#define ST_ACCEL_6_FS_ADDR			0x23
-#define ST_ACCEL_6_FS_MASK			0x30
-#define ST_ACCEL_6_FS_AVL_100_VAL		0x00
-#define ST_ACCEL_6_FS_AVL_200_VAL		0x01
-#define ST_ACCEL_6_FS_AVL_400_VAL		0x03
-#define ST_ACCEL_6_FS_AVL_100_GAIN		IIO_G_TO_M_S_2(49000)
-#define ST_ACCEL_6_FS_AVL_200_GAIN		IIO_G_TO_M_S_2(98000)
-#define ST_ACCEL_6_FS_AVL_400_GAIN		IIO_G_TO_M_S_2(195000)
-#define ST_ACCEL_6_BDU_ADDR			0x23
-#define ST_ACCEL_6_BDU_MASK			0x80
-#define ST_ACCEL_6_DRDY_IRQ_ADDR		0x22
-#define ST_ACCEL_6_DRDY_IRQ_INT1_MASK		0x02
-#define ST_ACCEL_6_DRDY_IRQ_INT2_MASK		0x10
-#define ST_ACCEL_6_IHL_IRQ_ADDR			0x22
-#define ST_ACCEL_6_IHL_IRQ_MASK			0x80
-#define ST_ACCEL_6_MULTIREAD_BIT		true
-
-/* CUSTOM VALUES FOR SENSOR 7 */
-#define ST_ACCEL_7_ODR_ADDR			0x20
-#define ST_ACCEL_7_ODR_MASK			0x30
-#define ST_ACCEL_7_ODR_AVL_280HZ_VAL		0x00
-#define ST_ACCEL_7_ODR_AVL_560HZ_VAL		0x01
-#define ST_ACCEL_7_ODR_AVL_1120HZ_VAL		0x02
-#define ST_ACCEL_7_ODR_AVL_4480HZ_VAL		0x03
-#define ST_ACCEL_7_PW_ADDR			0x20
-#define ST_ACCEL_7_PW_MASK			0xc0
-#define ST_ACCEL_7_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(488)
-#define ST_ACCEL_7_BDU_ADDR			0x21
-#define ST_ACCEL_7_BDU_MASK			0x40
-#define ST_ACCEL_7_DRDY_IRQ_ADDR		0x21
-#define ST_ACCEL_7_DRDY_IRQ_INT1_MASK		0x04
-#define ST_ACCEL_7_MULTIREAD_BIT		false
-
-/* CUSTOM VALUES FOR SENSOR 8 */
-#define ST_ACCEL_8_FS_AVL_2_GAIN		IIO_G_TO_M_S_2(15600)
-#define ST_ACCEL_8_FS_AVL_4_GAIN		IIO_G_TO_M_S_2(31200)
-#define ST_ACCEL_8_FS_AVL_8_GAIN		IIO_G_TO_M_S_2(62500)
-#define ST_ACCEL_8_FS_AVL_16_GAIN		IIO_G_TO_M_S_2(187500)
-
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -287,7 +93,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
 
 static const struct st_sensor_settings st_accel_sensors_settings[] = {
 	{
-		.wai = ST_ACCEL_1_WAI_EXP,
+		.wai = 0x33,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3DH_ACCEL_DEV_NAME,
@@ -300,22 +106,22 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
-				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
-				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
-				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -323,48 +129,48 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_1_FS_ADDR,
-			.mask = ST_ACCEL_1_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_1_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_1_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_1_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_8_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(4000),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_1_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_1_FS_AVL_16_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(12000),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_1_BDU_ADDR,
-			.mask = ST_ACCEL_1_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x10,
+			.mask_int2 = 0x08,
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_2_WAI_EXP,
+		.wai = 0x32,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS331DLH_ACCEL_DEV_NAME,
@@ -374,18 +180,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_2_ODR_ADDR,
-			.mask = ST_ACCEL_2_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x18,
 			.odr_avl = {
-				{ 50, ST_ACCEL_2_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_2_ODR_AVL_100HZ_VAL, },
-				{ 400, ST_ACCEL_2_ODR_AVL_400HZ_VAL, },
-				{ 1000, ST_ACCEL_2_ODR_AVL_1000HZ_VAL, },
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_2_PW_ADDR,
-			.mask = ST_ACCEL_2_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xe0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -394,69 +200,69 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_2_FS_ADDR,
-			.mask = ST_ACCEL_2_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_2_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_2_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(2000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_2_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_2_FS_AVL_8_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(3900),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_2_BDU_ADDR,
-			.mask = ST_ACCEL_2_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_2_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
-			.addr_od = ST_ACCEL_2_OD_IRQ_ADDR,
-			.mask_od = ST_ACCEL_2_OD_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x02,
+			.mask_int2 = 0x10,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_3_WAI_EXP,
+		.wai = 0x40,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LSM330_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_16bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_3_ODR_ADDR,
-			.mask = ST_ACCEL_3_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 3, ST_ACCEL_3_ODR_AVL_3HZ_VAL },
-				{ 6, ST_ACCEL_3_ODR_AVL_6HZ_VAL, },
-				{ 12, ST_ACCEL_3_ODR_AVL_12HZ_VAL, },
-				{ 25, ST_ACCEL_3_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_3_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_3_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_3_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_3_ODR_AVL_400HZ_VAL, },
-				{ 800, ST_ACCEL_3_ODR_AVL_800HZ_VAL, },
-				{ 1600, ST_ACCEL_3_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 3, .value = 0x01, },
+				{ .hz = 6, .value = 0x02, },
+				{ .hz = 12, .value = 0x03, },
+				{ .hz = 25, .value = 0x04, },
+				{ .hz = 50, .value = 0x05, },
+				{ .hz = 100, .value = 0x06, },
+				{ .hz = 200, .value = 0x07, },
+				{ .hz = 400, .value = 0x08, },
+				{ .hz = 800, .value = 0x09, },
+				{ .hz = 1600, .value = 0x0a, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_3_ODR_ADDR,
-			.mask = ST_ACCEL_3_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -464,75 +270,75 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_3_FS_ADDR,
-			.mask = ST_ACCEL_3_FS_MASK,
+			.addr = 0x24,
+			.mask = 0x38,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_3_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(61),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_3_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(122),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_6G,
-					.value = ST_ACCEL_3_FS_AVL_6_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_6_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(183),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_3_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_8_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(244),
 				},
 				[4] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_3_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_3_FS_AVL_16_GAIN,
+					.value = 0x04,
+					.gain = IIO_G_TO_M_S_2(732),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_3_BDU_ADDR,
-			.mask = ST_ACCEL_3_BDU_MASK,
+			.addr = 0x20,
+			.mask = 0x08,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_3_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK,
+			.addr = 0x23,
+			.mask_int1 = 0x80,
+			.mask_int2 = 0x00,
+			.addr_ihl = 0x23,
+			.mask_ihl = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 			.ig1 = {
-				.en_addr = ST_ACCEL_3_IG1_EN_ADDR,
-				.en_mask = ST_ACCEL_3_IG1_EN_MASK,
+				.en_addr = 0x23,
+				.en_mask = 0x08,
 			},
 		},
-		.multi_read_bit = ST_ACCEL_3_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_4_WAI_EXP,
+		.wai = 0x3a,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS3LV02DL_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_4_ODR_ADDR,
-			.mask = ST_ACCEL_4_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x30, /* DF1 and DF0 */
 			.odr_avl = {
-				{ 40, ST_ACCEL_4_ODR_AVL_40HZ_VAL },
-				{ 160, ST_ACCEL_4_ODR_AVL_160HZ_VAL, },
-				{ 640, ST_ACCEL_4_ODR_AVL_640HZ_VAL, },
-				{ 2560, ST_ACCEL_4_ODR_AVL_2560HZ_VAL, },
+				{ .hz = 40, .value = 0x00, },
+				{ .hz = 160, .value = 0x01, },
+				{ .hz = 640, .value = 0x02, },
+				{ .hz = 2560, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_4_PW_ADDR,
-			.mask = ST_ACCEL_4_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xc0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -541,51 +347,51 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_4_FS_ADDR,
-			.mask = ST_ACCEL_4_FS_MASK,
+			.addr = 0x21,
+			.mask = 0x80,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_4_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_4_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(1024),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_6G,
-					.value = ST_ACCEL_4_FS_AVL_6_VAL,
-					.gain = ST_ACCEL_4_FS_AVL_6_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(340),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_4_BDU_ADDR,
-			.mask = ST_ACCEL_4_BDU_MASK,
+			.addr = 0x21,
+			.mask = 0x40,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_4_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_4_DRDY_IRQ_INT1_MASK,
+			.addr = 0x21,
+			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_4_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2, /* guess */
 	},
 	{
-		.wai = ST_ACCEL_5_WAI_EXP,
+		.wai = 0x3b,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LIS331DL_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_5_ODR_ADDR,
-			.mask = ST_ACCEL_5_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x80,
 			.odr_avl = {
-				{ 100, ST_ACCEL_5_ODR_AVL_100HZ_VAL },
-				{ 400, ST_ACCEL_5_ODR_AVL_400HZ_VAL, },
+				{ .hz = 100, .value = 0x00, },
+				{ .hz = 400, .value = 0x01, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_5_PW_ADDR,
-			.mask = ST_ACCEL_5_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x40,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -594,54 +400,58 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_5_FS_ADDR,
-			.mask = ST_ACCEL_5_FS_MASK,
+			.addr = 0x20,
+			.mask = 0x20,
+			/*
+			 * TODO: check these resulting gain settings, these are
+			 * not in the datsheet
+			 */
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_5_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_5_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(18000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_5_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_5_FS_AVL_8_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(72000),
 				},
 			},
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_5_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
-			.addr_od = ST_ACCEL_5_OD_IRQ_ADDR,
-			.mask_od = ST_ACCEL_5_OD_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x04,
+			.mask_int2 = 0x20,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
+			.addr_od = 0x22,
+			.mask_od = 0x40,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2, /* guess */
 	},
 	{
-		.wai = ST_ACCEL_6_WAI_EXP,
+		.wai = 0x32,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = H3LIS331DL_DRIVER_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_6_ODR_ADDR,
-			.mask = ST_ACCEL_6_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x18,
 			.odr_avl = {
-				{ 50, ST_ACCEL_6_ODR_AVL_50HZ_VAL },
-				{ 100, ST_ACCEL_6_ODR_AVL_100HZ_VAL, },
-				{ 400, ST_ACCEL_6_ODR_AVL_400HZ_VAL, },
-				{ 1000, ST_ACCEL_6_ODR_AVL_1000HZ_VAL, },
+				{ .hz = 50, .value = 0x00, },
+				{ .hz = 100, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 1000, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_6_PW_ADDR,
-			.mask = ST_ACCEL_6_PW_MASK,
+			.addr = 0x20,
+			.mask = 0x20,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -650,38 +460,38 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_6_FS_ADDR,
-			.mask = ST_ACCEL_6_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_100G,
-					.value = ST_ACCEL_6_FS_AVL_100_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_100_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(49000),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_200G,
-					.value = ST_ACCEL_6_FS_AVL_200_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_200_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(98000),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_400G,
-					.value = ST_ACCEL_6_FS_AVL_400_VAL,
-					.gain = ST_ACCEL_6_FS_AVL_400_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(195000),
 				},
 			},
 		},
 		.bdu = {
-			.addr = ST_ACCEL_6_BDU_ADDR,
-			.mask = ST_ACCEL_6_BDU_MASK,
+			.addr = 0x23,
+			.mask = 0x80,
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_6_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_6_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_6_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_6_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_6_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x02,
+			.mask_int2 = 0x10,
+			.addr_ihl = 0x22,
+			.mask_ihl = 0x80,
 		},
-		.multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 	{
@@ -691,18 +501,18 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		},
 		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_7_ODR_ADDR,
-			.mask = ST_ACCEL_7_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0x30,
 			.odr_avl = {
-				{ 280, ST_ACCEL_7_ODR_AVL_280HZ_VAL, },
-				{ 560, ST_ACCEL_7_ODR_AVL_560HZ_VAL, },
-				{ 1120, ST_ACCEL_7_ODR_AVL_1120HZ_VAL, },
-				{ 4480, ST_ACCEL_7_ODR_AVL_4480HZ_VAL, },
+				{ .hz = 280, .value = 0x00, },
+				{ .hz = 560, .value = 0x01, },
+				{ .hz = 1120, .value = 0x02, },
+				{ .hz = 4480, .value = 0x03, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_7_PW_ADDR,
-			.mask = ST_ACCEL_7_PW_MASK,
+			.addr = 0x20,
+			.mask = 0xc0,
 			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
@@ -714,7 +524,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.gain = ST_ACCEL_7_FS_AVL_2_GAIN,
+					.gain = IIO_G_TO_M_S_2(488),
 				},
 			},
 		},
@@ -725,37 +535,37 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.bdu = {
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_7_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_7_DRDY_IRQ_INT1_MASK,
+			.addr = 0x21,
+			.mask_int1 = 0x04,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_7_MULTIREAD_BIT,
+		.multi_read_bit = false,
 		.bootime = 2,
 	},
 	{
-		.wai = ST_ACCEL_1_WAI_EXP,
+		.wai = 0x33,
 		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
 		.sensors_supported = {
 			[0] = LNG2DM_ACCEL_DEV_NAME,
 		},
 		.ch = (struct iio_chan_spec *)st_accel_8bit_channels,
 		.odr = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.odr_avl = {
-				{ 1, ST_ACCEL_1_ODR_AVL_1HZ_VAL, },
-				{ 10, ST_ACCEL_1_ODR_AVL_10HZ_VAL, },
-				{ 25, ST_ACCEL_1_ODR_AVL_25HZ_VAL, },
-				{ 50, ST_ACCEL_1_ODR_AVL_50HZ_VAL, },
-				{ 100, ST_ACCEL_1_ODR_AVL_100HZ_VAL, },
-				{ 200, ST_ACCEL_1_ODR_AVL_200HZ_VAL, },
-				{ 400, ST_ACCEL_1_ODR_AVL_400HZ_VAL, },
-				{ 1600, ST_ACCEL_1_ODR_AVL_1600HZ_VAL, },
+				{ .hz = 1, .value = 0x01, },
+				{ .hz = 10, .value = 0x02, },
+				{ .hz = 25, .value = 0x03, },
+				{ .hz = 50, .value = 0x04, },
+				{ .hz = 100, .value = 0x05, },
+				{ .hz = 200, .value = 0x06, },
+				{ .hz = 400, .value = 0x07, },
+				{ .hz = 1600, .value = 0x08, },
 			},
 		},
 		.pw = {
-			.addr = ST_ACCEL_1_ODR_ADDR,
-			.mask = ST_ACCEL_1_ODR_MASK,
+			.addr = 0x20,
+			.mask = 0xf0,
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.enable_axis = {
@@ -763,40 +573,40 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
 		},
 		.fs = {
-			.addr = ST_ACCEL_1_FS_ADDR,
-			.mask = ST_ACCEL_1_FS_MASK,
+			.addr = 0x23,
+			.mask = 0x30,
 			.fs_avl = {
 				[0] = {
 					.num = ST_ACCEL_FS_AVL_2G,
-					.value = ST_ACCEL_1_FS_AVL_2_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_2_GAIN,
+					.value = 0x00,
+					.gain = IIO_G_TO_M_S_2(15600),
 				},
 				[1] = {
 					.num = ST_ACCEL_FS_AVL_4G,
-					.value = ST_ACCEL_1_FS_AVL_4_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_4_GAIN,
+					.value = 0x01,
+					.gain = IIO_G_TO_M_S_2(31200),
 				},
 				[2] = {
 					.num = ST_ACCEL_FS_AVL_8G,
-					.value = ST_ACCEL_1_FS_AVL_8_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_8_GAIN,
+					.value = 0x02,
+					.gain = IIO_G_TO_M_S_2(62500),
 				},
 				[3] = {
 					.num = ST_ACCEL_FS_AVL_16G,
-					.value = ST_ACCEL_1_FS_AVL_16_VAL,
-					.gain = ST_ACCEL_8_FS_AVL_16_GAIN,
+					.value = 0x03,
+					.gain = IIO_G_TO_M_S_2(187500),
 				},
 			},
 		},
 		.drdy_irq = {
-			.addr = ST_ACCEL_1_DRDY_IRQ_ADDR,
-			.mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK,
-			.mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK,
-			.addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR,
-			.mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK,
+			.addr = 0x22,
+			.mask_int1 = 0x10,
+			.mask_int2 = 0x08,
+			.addr_ihl = 0x25,
+			.mask_ihl = 0x02,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
-		.multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT,
+		.multi_read_bit = true,
 		.bootime = 2,
 	},
 };

drivers/iio/adc/Kconfig

@@ -441,6 +441,28 @@ config ROCKCHIP_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called rockchip_saradc.
 
+config STM32_ADC_CORE
+	tristate "STMicroelectronics STM32 adc core"
+	depends on ARCH_STM32 || COMPILE_TEST
+	depends on OF
+	depends on REGULATOR
+	help
+	  Select this option to enable the core driver for STMicroelectronics
+	  STM32 analog-to-digital converter (ADC).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-adc-core.
+
+config STM32_ADC
+	tristate "STMicroelectronics STM32 adc"
+	depends on STM32_ADC_CORE
+	help
+	  Say yes here to build support for STMicroelectronics stm32 Analog
+	  to Digital Converter (ADC).
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called stm32-adc.
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on X86 && ISA_BUS_API

drivers/iio/adc/Makefile

@@ -43,6 +43,8 @@ obj-$(CONFIG_QCOM_SPMI_IADC) += qcom-spmi-iadc.o
 obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
 obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_STX104) += stx104.o
+obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
+obj-$(CONFIG_STM32_ADC) += stm32-adc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC12138) += ti-adc12138.o

drivers/iio/adc/stm32-adc-core.c

@@ -0,0 +1,303 @@
+/*
+ * This file is part of STM32 ADC driver
+ *
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
+ *
+ * Inspired from: fsl-imx25-tsadc
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdesc.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+#include "stm32-adc-core.h"
+
+/* STM32F4 - common registers for all ADC instances: 1, 2 & 3 */
+#define STM32F4_ADC_CSR			(STM32_ADCX_COMN_OFFSET + 0x00)
+#define STM32F4_ADC_CCR			(STM32_ADCX_COMN_OFFSET + 0x04)
+
+/* STM32F4_ADC_CSR - bit fields */
+#define STM32F4_EOC3			BIT(17)
+#define STM32F4_EOC2			BIT(9)
+#define STM32F4_EOC1			BIT(1)
+
+/* STM32F4_ADC_CCR - bit fields */
+#define STM32F4_ADC_ADCPRE_SHIFT	16
+#define STM32F4_ADC_ADCPRE_MASK		GENMASK(17, 16)
+
+/* STM32 F4 maximum analog clock rate (from datasheet) */
+#define STM32F4_ADC_MAX_CLK_RATE	36000000
+
+/**
+ * struct stm32_adc_priv - stm32 ADC core private data
+ * @irq:		irq for ADC block
+ * @domain:		irq domain reference
+ * @aclk:		clock reference for the analog circuitry
+ * @vref:		regulator reference
+ * @common:		common data for all ADC instances
+ */
+struct stm32_adc_priv {
+	int				irq;
+	struct irq_domain		*domain;
+	struct clk			*aclk;
+	struct regulator		*vref;
+	struct stm32_adc_common		common;
+};
+
+static struct stm32_adc_priv *to_stm32_adc_priv(struct stm32_adc_common *com)
+{
+	return container_of(com, struct stm32_adc_priv, common);
+}
+
+/* STM32F4 ADC internal common clock prescaler division ratios */
+static int stm32f4_pclk_div[] = {2, 4, 6, 8};
+
+/**
+ * stm32f4_adc_clk_sel() - Select stm32f4 ADC common clock prescaler
+ * @priv: stm32 ADC core private data
+ * Select clock prescaler used for analog conversions, before using ADC.
+ */
+static int stm32f4_adc_clk_sel(struct platform_device *pdev,
+			       struct stm32_adc_priv *priv)
+{
+	unsigned long rate;
+	u32 val;
+	int i;
+
+	rate = clk_get_rate(priv->aclk);
+	for (i = 0; i < ARRAY_SIZE(stm32f4_pclk_div); i++) {
+		if ((rate / stm32f4_pclk_div[i]) <= STM32F4_ADC_MAX_CLK_RATE)
+			break;
+	}
+	if (i >= ARRAY_SIZE(stm32f4_pclk_div))
+		return -EINVAL;
+
+	val = readl_relaxed(priv->common.base + STM32F4_ADC_CCR);
+	val &= ~STM32F4_ADC_ADCPRE_MASK;
+	val |= i << STM32F4_ADC_ADCPRE_SHIFT;
+	writel_relaxed(val, priv->common.base + STM32F4_ADC_CCR);
+
+	dev_dbg(&pdev->dev, "Using analog clock source at %ld kHz\n",
+		rate / (stm32f4_pclk_div[i] * 1000));
+
+	return 0;
+}
+
+/* ADC common interrupt for all instances */
+static void stm32_adc_irq_handler(struct irq_desc *desc)
+{
+	struct stm32_adc_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 status;
+
+	chained_irq_enter(chip, desc);
+	status = readl_relaxed(priv->common.base + STM32F4_ADC_CSR);
+
+	if (status & STM32F4_EOC1)
+		generic_handle_irq(irq_find_mapping(priv->domain, 0));
+
+	if (status & STM32F4_EOC2)
+		generic_handle_irq(irq_find_mapping(priv->domain, 1));
+
+	if (status & STM32F4_EOC3)
+		generic_handle_irq(irq_find_mapping(priv->domain, 2));
+
+	chained_irq_exit(chip, desc);
+};
+
+static int stm32_adc_domain_map(struct irq_domain *d, unsigned int irq,
+				irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(irq, d->host_data);
+	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_level_irq);
+
+	return 0;
+}
+
+static void stm32_adc_domain_unmap(struct irq_domain *d, unsigned int irq)
+{
+	irq_set_chip_and_handler(irq, NULL, NULL);
+	irq_set_chip_data(irq, NULL);
+}
+
+static const struct irq_domain_ops stm32_adc_domain_ops = {
+	.map = stm32_adc_domain_map,
+	.unmap  = stm32_adc_domain_unmap,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int stm32_adc_irq_probe(struct platform_device *pdev,
+			       struct stm32_adc_priv *priv)
+{
+	struct device_node *np = pdev->dev.of_node;
+
+	priv->irq = platform_get_irq(pdev, 0);
+	if (priv->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return priv->irq;
+	}
+
+	priv->domain = irq_domain_add_simple(np, STM32_ADC_MAX_ADCS, 0,
+					     &stm32_adc_domain_ops,
+					     priv);
+	if (!priv->domain) {
+		dev_err(&pdev->dev, "Failed to add irq domain\n");
+		return -ENOMEM;
+	}
+
+	irq_set_chained_handler(priv->irq, stm32_adc_irq_handler);
+	irq_set_handler_data(priv->irq, priv);
+
+	return 0;
+}
+
+static void stm32_adc_irq_remove(struct platform_device *pdev,
+				 struct stm32_adc_priv *priv)
+{
+	int hwirq;
+
+	for (hwirq = 0; hwirq < STM32_ADC_MAX_ADCS; hwirq++)
+		irq_dispose_mapping(irq_find_mapping(priv->domain, hwirq));
+	irq_domain_remove(priv->domain);
+	irq_set_chained_handler(priv->irq, NULL);
+}
+
+static int stm32_adc_probe(struct platform_device *pdev)
+{
+	struct stm32_adc_priv *priv;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *res;
+	int ret;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->common.base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->common.base))
+		return PTR_ERR(priv->common.base);
+
+	priv->vref = devm_regulator_get(&pdev->dev, "vref");
+	if (IS_ERR(priv->vref)) {
+		ret = PTR_ERR(priv->vref);
+		dev_err(&pdev->dev, "vref get failed, %d\n", ret);
+		return ret;
+	}
+
+	ret = regulator_enable(priv->vref);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "vref enable failed\n");
+		return ret;
+	}
+
+	ret = regulator_get_voltage(priv->vref);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "vref get voltage failed, %d\n", ret);
+		goto err_regulator_disable;
+	}
+	priv->common.vref_mv = ret / 1000;
+	dev_dbg(&pdev->dev, "vref+=%dmV\n", priv->common.vref_mv);
+
+	priv->aclk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(priv->aclk)) {
+		ret = PTR_ERR(priv->aclk);
+		dev_err(&pdev->dev, "Can't get 'adc' clock\n");
+		goto err_regulator_disable;
+	}
+
+	ret = clk_prepare_enable(priv->aclk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "adc clk enable failed\n");
+		goto err_regulator_disable;
+	}
+
+	ret = stm32f4_adc_clk_sel(pdev, priv);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "adc clk selection failed\n");
+		goto err_clk_disable;
+	}
+
+	ret = stm32_adc_irq_probe(pdev, priv);
+	if (ret < 0)
+		goto err_clk_disable;
+
+	platform_set_drvdata(pdev, &priv->common);
+
+	ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to populate DT children\n");
+		goto err_irq_remove;
+	}
+
+	return 0;
+
+err_irq_remove:
+	stm32_adc_irq_remove(pdev, priv);
+
+err_clk_disable:
+	clk_disable_unprepare(priv->aclk);
+
+err_regulator_disable:
+	regulator_disable(priv->vref);
+
+	return ret;
+}
+
+static int stm32_adc_remove(struct platform_device *pdev)
+{
+	struct stm32_adc_common *common = platform_get_drvdata(pdev);
+	struct stm32_adc_priv *priv = to_stm32_adc_priv(common);
+
+	of_platform_depopulate(&pdev->dev);
+	stm32_adc_irq_remove(pdev, priv);
+	clk_disable_unprepare(priv->aclk);
+	regulator_disable(priv->vref);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_adc_of_match[] = {
+	{ .compatible = "st,stm32f4-adc-core" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
+
+static struct platform_driver stm32_adc_driver = {
+	.probe = stm32_adc_probe,
+	.remove = stm32_adc_remove,
+	.driver = {
+		.name = "stm32-adc-core",
+		.of_match_table = stm32_adc_of_match,
+	},
+};
+module_platform_driver(stm32_adc_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 ADC core driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm32-adc-core");

drivers/iio/adc/stm32-adc-core.h

@@ -0,0 +1,52 @@
+/*
+ * This file is part of STM32 ADC driver
+ *
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __STM32_ADC_H
+#define __STM32_ADC_H
+
+/*
+ * STM32 - ADC global register map
+ * ________________________________________________________
+ * | Offset |                 Register                    |
+ * --------------------------------------------------------
+ * | 0x000  |                Master ADC1                  |
+ * --------------------------------------------------------
+ * | 0x100  |                Slave ADC2                   |
+ * --------------------------------------------------------
+ * | 0x200  |                Slave ADC3                   |
+ * --------------------------------------------------------
+ * | 0x300  |         Master & Slave common regs          |
+ * --------------------------------------------------------
+ */
+#define STM32_ADC_MAX_ADCS		3
+#define STM32_ADCX_COMN_OFFSET		0x300
+
+/**
+ * struct stm32_adc_common - stm32 ADC driver common data (for all instances)
+ * @base:		control registers base cpu addr
+ * @vref_mv:		vref voltage (mv)
+ */
+struct stm32_adc_common {
+	void __iomem			*base;
+	int				vref_mv;
+};
+
+#endif

drivers/iio/adc/stm32-adc.c

@@ -0,0 +1,518 @@
+/*
+ * This file is part of STM32 ADC driver
+ *
+ * Copyright (C) 2016, STMicroelectronics - All Rights Reserved
+ * Author: Fabrice Gasnier <fabrice.gasnier@st.com>.
+ *
+ * License type: GPLv2
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.
+ * See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include "stm32-adc-core.h"
+
+/* STM32F4 - Registers for each ADC instance */
+#define STM32F4_ADC_SR			0x00
+#define STM32F4_ADC_CR1			0x04
+#define STM32F4_ADC_CR2			0x08
+#define STM32F4_ADC_SMPR1		0x0C
+#define STM32F4_ADC_SMPR2		0x10
+#define STM32F4_ADC_HTR			0x24
+#define STM32F4_ADC_LTR			0x28
+#define STM32F4_ADC_SQR1		0x2C
+#define STM32F4_ADC_SQR2		0x30
+#define STM32F4_ADC_SQR3		0x34
+#define STM32F4_ADC_JSQR		0x38
+#define STM32F4_ADC_JDR1		0x3C
+#define STM32F4_ADC_JDR2		0x40
+#define STM32F4_ADC_JDR3		0x44
+#define STM32F4_ADC_JDR4		0x48
+#define STM32F4_ADC_DR			0x4C
+
+/* STM32F4_ADC_SR - bit fields */
+#define STM32F4_STRT			BIT(4)
+#define STM32F4_EOC			BIT(1)
+
+/* STM32F4_ADC_CR1 - bit fields */
+#define STM32F4_SCAN			BIT(8)
+#define STM32F4_EOCIE			BIT(5)
+
+/* STM32F4_ADC_CR2 - bit fields */
+#define STM32F4_SWSTART			BIT(30)
+#define STM32F4_EXTEN_MASK		GENMASK(29, 28)
+#define STM32F4_EOCS			BIT(10)
+#define STM32F4_ADON			BIT(0)
+
+/* STM32F4_ADC_SQR1 - bit fields */
+#define STM32F4_L_SHIFT			20
+#define STM32F4_L_MASK			GENMASK(23, 20)
+
+/* STM32F4_ADC_SQR3 - bit fields */
+#define STM32F4_SQ1_SHIFT		0
+#define STM32F4_SQ1_MASK		GENMASK(4, 0)
+
+#define STM32_ADC_TIMEOUT_US		100000
+#define STM32_ADC_TIMEOUT	(msecs_to_jiffies(STM32_ADC_TIMEOUT_US / 1000))
+
+/**
+ * struct stm32_adc - private data of each ADC IIO instance
+ * @common:		reference to ADC block common data
+ * @offset:		ADC instance register offset in ADC block
+ * @completion:		end of single conversion completion
+ * @buffer:		data buffer
+ * @clk:		clock for this adc instance
+ * @irq:		interrupt for this adc instance
+ * @lock:		spinlock
+ */
+struct stm32_adc {
+	struct stm32_adc_common	*common;
+	u32			offset;
+	struct completion	completion;
+	u16			*buffer;
+	struct clk		*clk;
+	int			irq;
+	spinlock_t		lock;		/* interrupt lock */
+};
+
+/**
+ * struct stm32_adc_chan_spec - specification of stm32 adc channel
+ * @type:	IIO channel type
+ * @channel:	channel number (single ended)
+ * @name:	channel name (single ended)
+ */
+struct stm32_adc_chan_spec {
+	enum iio_chan_type	type;
+	int			channel;
+	const char		*name;
+};
+
+/* Input definitions common for all STM32F4 instances */
+static const struct stm32_adc_chan_spec stm32f4_adc123_channels[] = {
+	{ IIO_VOLTAGE, 0, "in0" },
+	{ IIO_VOLTAGE, 1, "in1" },
+	{ IIO_VOLTAGE, 2, "in2" },
+	{ IIO_VOLTAGE, 3, "in3" },
+	{ IIO_VOLTAGE, 4, "in4" },
+	{ IIO_VOLTAGE, 5, "in5" },
+	{ IIO_VOLTAGE, 6, "in6" },
+	{ IIO_VOLTAGE, 7, "in7" },
+	{ IIO_VOLTAGE, 8, "in8" },
+	{ IIO_VOLTAGE, 9, "in9" },
+	{ IIO_VOLTAGE, 10, "in10" },
+	{ IIO_VOLTAGE, 11, "in11" },
+	{ IIO_VOLTAGE, 12, "in12" },
+	{ IIO_VOLTAGE, 13, "in13" },
+	{ IIO_VOLTAGE, 14, "in14" },
+	{ IIO_VOLTAGE, 15, "in15" },
+};
+
+/**
+ * STM32 ADC registers access routines
+ * @adc: stm32 adc instance
+ * @reg: reg offset in adc instance
+ *
+ * Note: All instances share same base, with 0x0, 0x100 or 0x200 offset resp.
+ * for adc1, adc2 and adc3.
+ */
+static u32 stm32_adc_readl(struct stm32_adc *adc, u32 reg)
+{
+	return readl_relaxed(adc->common->base + adc->offset + reg);
+}
+
+static u16 stm32_adc_readw(struct stm32_adc *adc, u32 reg)
+{
+	return readw_relaxed(adc->common->base + adc->offset + reg);
+}
+
+static void stm32_adc_writel(struct stm32_adc *adc, u32 reg, u32 val)
+{
+	writel_relaxed(val, adc->common->base + adc->offset + reg);
+}
+
+static void stm32_adc_set_bits(struct stm32_adc *adc, u32 reg, u32 bits)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc->lock, flags);
+	stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) | bits);
+	spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+static void stm32_adc_clr_bits(struct stm32_adc *adc, u32 reg, u32 bits)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&adc->lock, flags);
+	stm32_adc_writel(adc, reg, stm32_adc_readl(adc, reg) & ~bits);
+	spin_unlock_irqrestore(&adc->lock, flags);
+}
+
+/**
+ * stm32_adc_conv_irq_enable() - Enable end of conversion interrupt
+ * @adc: stm32 adc instance
+ */
+static void stm32_adc_conv_irq_enable(struct stm32_adc *adc)
+{
+	stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_EOCIE);
+};
+
+/**
+ * stm32_adc_conv_irq_disable() - Disable end of conversion interrupt
+ * @adc: stm32 adc instance
+ */
+static void stm32_adc_conv_irq_disable(struct stm32_adc *adc)
+{
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_EOCIE);
+}
+
+/**
+ * stm32_adc_start_conv() - Start conversions for regular channels.
+ * @adc: stm32 adc instance
+ */
+static void stm32_adc_start_conv(struct stm32_adc *adc)
+{
+	stm32_adc_set_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
+	stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_EOCS | STM32F4_ADON);
+
+	/* Wait for Power-up time (tSTAB from datasheet) */
+	usleep_range(2, 3);
+
+	/* Software start ? (e.g. trigger detection disabled ?) */
+	if (!(stm32_adc_readl(adc, STM32F4_ADC_CR2) & STM32F4_EXTEN_MASK))
+		stm32_adc_set_bits(adc, STM32F4_ADC_CR2, STM32F4_SWSTART);
+}
+
+static void stm32_adc_stop_conv(struct stm32_adc *adc)
+{
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_EXTEN_MASK);
+	stm32_adc_clr_bits(adc, STM32F4_ADC_SR, STM32F4_STRT);
+
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR1, STM32F4_SCAN);
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_ADON);
+}
+
+/**
+ * stm32_adc_single_conv() - Performs a single conversion
+ * @indio_dev: IIO device
+ * @chan: IIO channel
+ * @res: conversion result
+ *
+ * The function performs a single conversion on a given channel:
+ * - Program sequencer with one channel (e.g. in SQ1 with len = 1)
+ * - Use SW trigger
+ * - Start conversion, then wait for interrupt completion.
+ */
+static int stm32_adc_single_conv(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 int *res)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	long timeout;
+	u32 val;
+	u16 result;
+	int ret;
+
+	reinit_completion(&adc->completion);
+
+	adc->buffer = &result;
+
+	/* Program chan number in regular sequence */
+	val = stm32_adc_readl(adc, STM32F4_ADC_SQR3);
+	val &= ~STM32F4_SQ1_MASK;
+	val |= chan->channel << STM32F4_SQ1_SHIFT;
+	stm32_adc_writel(adc, STM32F4_ADC_SQR3, val);
+
+	/* Set regular sequence len (0 for 1 conversion) */
+	stm32_adc_clr_bits(adc, STM32F4_ADC_SQR1, STM32F4_L_MASK);
+
+	/* Trigger detection disabled (conversion can be launched in SW) */
+	stm32_adc_clr_bits(adc, STM32F4_ADC_CR2, STM32F4_EXTEN_MASK);
+
+	stm32_adc_conv_irq_enable(adc);
+
+	stm32_adc_start_conv(adc);
+
+	timeout = wait_for_completion_interruptible_timeout(
+					&adc->completion, STM32_ADC_TIMEOUT);
+	if (timeout == 0) {
+		ret = -ETIMEDOUT;
+	} else if (timeout < 0) {
+		ret = timeout;
+	} else {
+		*res = result;
+		ret = IIO_VAL_INT;
+	}
+
+	stm32_adc_stop_conv(adc);
+
+	stm32_adc_conv_irq_disable(adc);
+
+	return ret;
+}
+
+static int stm32_adc_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2, long mask)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		if (chan->type == IIO_VOLTAGE)
+			ret = stm32_adc_single_conv(indio_dev, chan, val);
+		else
+			ret = -EINVAL;
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = adc->common->vref_mv;
+		*val2 = chan->scan_type.realbits;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t stm32_adc_isr(int irq, void *data)
+{
+	struct stm32_adc *adc = data;
+	u32 status = stm32_adc_readl(adc, STM32F4_ADC_SR);
+
+	if (status & STM32F4_EOC) {
+		*adc->buffer = stm32_adc_readw(adc, STM32F4_ADC_DR);
+		complete(&adc->completion);
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_NONE;
+}
+
+static int stm32_adc_of_xlate(struct iio_dev *indio_dev,
+			      const struct of_phandle_args *iiospec)
+{
+	int i;
+
+	for (i = 0; i < indio_dev->num_channels; i++)
+		if (indio_dev->channels[i].channel == iiospec->args[0])
+			return i;
+
+	return -EINVAL;
+}
+
+/**
+ * stm32_adc_debugfs_reg_access - read or write register value
+ *
+ * To read a value from an ADC register:
+ *   echo [ADC reg offset] > direct_reg_access
+ *   cat direct_reg_access
+ *
+ * To write a value in a ADC register:
+ *   echo [ADC_reg_offset] [value] > direct_reg_access
+ */
+static int stm32_adc_debugfs_reg_access(struct iio_dev *indio_dev,
+					unsigned reg, unsigned writeval,
+					unsigned *readval)
+{
+	struct stm32_adc *adc = iio_priv(indio_dev);
+
+	if (!readval)
+		stm32_adc_writel(adc, reg, writeval);
+	else
+		*readval = stm32_adc_readl(adc, reg);
+
+	return 0;
+}
+
+static const struct iio_info stm32_adc_iio_info = {
+	.read_raw = stm32_adc_read_raw,
+	.debugfs_reg_access = stm32_adc_debugfs_reg_access,
+	.of_xlate = stm32_adc_of_xlate,
+	.driver_module = THIS_MODULE,
+};
+
+static void stm32_adc_chan_init_one(struct iio_dev *indio_dev,
+				    struct iio_chan_spec *chan,
+				    const struct stm32_adc_chan_spec *channel,
+				    int scan_index)
+{
+	chan->type = channel->type;
+	chan->channel = channel->channel;
+	chan->datasheet_name = channel->name;
+	chan->scan_index = scan_index;
+	chan->indexed = 1;
+	chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+	chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
+	chan->scan_type.sign = 'u';
+	chan->scan_type.realbits = 12;
+	chan->scan_type.storagebits = 16;
+}
+
+static int stm32_adc_chan_of_init(struct iio_dev *indio_dev)
+{
+	struct device_node *node = indio_dev->dev.of_node;
+	struct property *prop;
+	const __be32 *cur;
+	struct iio_chan_spec *channels;
+	int scan_index = 0, num_channels;
+	u32 val;
+
+	num_channels = of_property_count_u32_elems(node, "st,adc-channels");
+	if (num_channels < 0 ||
+	    num_channels >= ARRAY_SIZE(stm32f4_adc123_channels)) {
+		dev_err(&indio_dev->dev, "Bad st,adc-channels?\n");
+		return num_channels < 0 ? num_channels : -EINVAL;
+	}
+
+	channels = devm_kcalloc(&indio_dev->dev, num_channels,
+				sizeof(struct iio_chan_spec), GFP_KERNEL);
+	if (!channels)
+		return -ENOMEM;
+
+	of_property_for_each_u32(node, "st,adc-channels", prop, cur, val) {
+		if (val >= ARRAY_SIZE(stm32f4_adc123_channels)) {
+			dev_err(&indio_dev->dev, "Invalid channel %d\n", val);
+			return -EINVAL;
+		}
+		stm32_adc_chan_init_one(indio_dev, &channels[scan_index],
+					&stm32f4_adc123_channels[val],
+					scan_index);
+		scan_index++;
+	}
+
+	indio_dev->num_channels = scan_index;
+	indio_dev->channels = channels;
+
+	return 0;
+}
+
+static int stm32_adc_probe(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev;
+	struct stm32_adc *adc;
+	int ret;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc = iio_priv(indio_dev);
+	adc->common = dev_get_drvdata(pdev->dev.parent);
+	spin_lock_init(&adc->lock);
+	init_completion(&adc->completion);
+
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->dev.of_node = pdev->dev.of_node;
+	indio_dev->info = &stm32_adc_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	platform_set_drvdata(pdev, adc);
+
+	ret = of_property_read_u32(pdev->dev.of_node, "reg", &adc->offset);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "missing reg property\n");
+		return -EINVAL;
+	}
+
+	adc->irq = platform_get_irq(pdev, 0);
+	if (adc->irq < 0) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		return adc->irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, adc->irq, stm32_adc_isr,
+			       0, pdev->name, adc);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return ret;
+	}
+
+	adc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(adc->clk)) {
+		dev_err(&pdev->dev, "Can't get clock\n");
+		return PTR_ERR(adc->clk);
+	}
+
+	ret = clk_prepare_enable(adc->clk);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "clk enable failed\n");
+		return ret;
+	}
+
+	ret = stm32_adc_chan_of_init(indio_dev);
+	if (ret < 0)
+		goto err_clk_disable;
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "iio dev register failed\n");
+		goto err_clk_disable;
+	}
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(adc->clk);
+
+	return ret;
+}
+
+static int stm32_adc_remove(struct platform_device *pdev)
+{
+	struct stm32_adc *adc = platform_get_drvdata(pdev);
+	struct iio_dev *indio_dev = iio_priv_to_dev(adc);
+
+	iio_device_unregister(indio_dev);
+	clk_disable_unprepare(adc->clk);
+
+	return 0;
+}
+
+static const struct of_device_id stm32_adc_of_match[] = {
+	{ .compatible = "st,stm32f4-adc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stm32_adc_of_match);
+
+static struct platform_driver stm32_adc_driver = {
+	.probe = stm32_adc_probe,
+	.remove = stm32_adc_remove,
+	.driver = {
+		.name = "stm32-adc",
+		.of_match_table = stm32_adc_of_match,
+	},
+};
+module_platform_driver(stm32_adc_driver);
+
+MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 ADC IIO driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stm32-adc");

drivers/iio/light/tsl2583.c

@@ -565,7 +565,7 @@ static ssize_t in_illuminance_lux_table_store(struct device *dev,
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct tsl2583_chip *chip = iio_priv(indio_dev);
 	const unsigned int max_ints = TSL2583_MAX_LUX_TABLE_ENTRIES * 3;
-	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3];
+	int value[TSL2583_MAX_LUX_TABLE_ENTRIES * 3 + 1];
 	int ret = -EINVAL;
 	unsigned int n;
 

drivers/iio/magnetometer/hid-sensor-magn-3d.c

@@ -42,9 +42,17 @@ enum magn_3d_channel {
 	MAGN_3D_CHANNEL_MAX,
 };
 
+struct common_attributes {
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+};
+
 struct magn_3d_state {
 	struct hid_sensor_hub_callbacks callbacks;
-	struct hid_sensor_common common_attributes;
+	struct hid_sensor_common magn_flux_attributes;
+	struct hid_sensor_common rot_attributes;
 	struct hid_sensor_hub_attribute_info magn[MAGN_3D_CHANNEL_MAX];
 
 	/* dynamically sized array to hold sensor values */
@@ -52,10 +60,8 @@ struct magn_3d_state {
 	/* array of pointers to sensor value */
 	u32 *magn_val_addr[MAGN_3D_CHANNEL_MAX];
 
-	int scale_pre_decml;
-	int scale_post_decml;
-	int scale_precision;
-	int value_offset;
+	struct common_attributes magn_flux_attr;
+	struct common_attributes rot_attr;
 };
 
 static const u32 magn_3d_addresses[MAGN_3D_CHANNEL_MAX] = {
@@ -162,41 +168,74 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev,
 	*val2 = 0;
 	switch (mask) {
 	case 0:
-		hid_sensor_power_state(&magn_state->common_attributes, true);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes, true);
 		report_id =
 			magn_state->magn[chan->address].report_id;
 		address = magn_3d_addresses[chan->address];
 		if (report_id >= 0)
 			*val = sensor_hub_input_attr_get_raw_value(
-				magn_state->common_attributes.hsdev,
+				magn_state->magn_flux_attributes.hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D, address,
 				report_id,
 				SENSOR_HUB_SYNC);
 		else {
 			*val = 0;
-			hid_sensor_power_state(&magn_state->common_attributes,
-						false);
+			hid_sensor_power_state(
+				&magn_state->magn_flux_attributes,
+				false);
 			return -EINVAL;
 		}
-		hid_sensor_power_state(&magn_state->common_attributes, false);
+		hid_sensor_power_state(&magn_state->magn_flux_attributes,
+					false);
 		ret_type = IIO_VAL_INT;
 		break;
 	case IIO_CHAN_INFO_SCALE:
-		*val = magn_state->scale_pre_decml;
-		*val2 = magn_state->scale_post_decml;
-		ret_type = magn_state->scale_precision;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.scale_pre_decml;
+			*val2 = magn_state->magn_flux_attr.scale_post_decml;
+			ret_type = magn_state->magn_flux_attr.scale_precision;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.scale_pre_decml;
+			*val2 = magn_state->rot_attr.scale_post_decml;
+			ret_type = magn_state->rot_attr.scale_precision;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = magn_state->value_offset;
-		ret_type = IIO_VAL_INT;
+		switch (chan->type) {
+		case IIO_MAGN:
+			*val = magn_state->magn_flux_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		case IIO_ROT:
+			*val = magn_state->rot_attr.value_offset;
+			ret_type = IIO_VAL_INT;
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret_type = hid_sensor_read_samp_freq_value(
-			&magn_state->common_attributes, val, val2);
+			&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret_type = hid_sensor_read_raw_hyst_value(
-			&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret_type = hid_sensor_read_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret_type = -EINVAL;
+		}
 		break;
 	default:
 		ret_type = -EINVAL;
@@ -219,11 +258,21 @@ static int magn_3d_write_raw(struct iio_dev *indio_dev,
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		ret = hid_sensor_write_samp_freq_value(
-				&magn_state->common_attributes, val, val2);
+				&magn_state->magn_flux_attributes, val, val2);
 		break;
 	case IIO_CHAN_INFO_HYSTERESIS:
-		ret = hid_sensor_write_raw_hyst_value(
-				&magn_state->common_attributes, val, val2);
+		switch (chan->type) {
+		case IIO_MAGN:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->magn_flux_attributes, val, val2);
+			break;
+		case IIO_ROT:
+			ret = hid_sensor_write_raw_hyst_value(
+				&magn_state->rot_attributes, val, val2);
+			break;
+		default:
+			ret = -EINVAL;
+		}
 		break;
 	default:
 		ret = -EINVAL;
@@ -254,7 +303,7 @@ static int magn_3d_proc_event(struct hid_sensor_hub_device *hsdev,
 	struct magn_3d_state *magn_state = iio_priv(indio_dev);
 
 	dev_dbg(&indio_dev->dev, "magn_3d_proc_event\n");
-	if (atomic_read(&magn_state->common_attributes.data_ready))
+	if (atomic_read(&magn_state->magn_flux_attributes.data_ready))
 		hid_sensor_push_data(indio_dev, magn_state->iio_vals);
 
 	return 0;
@@ -389,21 +438,48 @@ static int magn_3d_parse_report(struct platform_device *pdev,
 	dev_dbg(&pdev->dev, "magn_3d Setup %d IIO channels\n",
 			*chan_count);
 
-	st->scale_precision = hid_sensor_format_scale(
+	st->magn_flux_attr.scale_precision = hid_sensor_format_scale(
 				HID_USAGE_SENSOR_COMPASS_3D,
 				&st->magn[CHANNEL_SCAN_INDEX_X],
-				&st->scale_pre_decml, &st->scale_post_decml);
+				&st->magn_flux_attr.scale_pre_decml,
+				&st->magn_flux_attr.scale_post_decml);
+	st->rot_attr.scale_precision
+		= hid_sensor_format_scale(
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->magn[CHANNEL_SCAN_INDEX_NORTH_MAGN_TILT_COMP],
+			&st->rot_attr.scale_pre_decml,
+			&st->rot_attr.scale_post_decml);
 
 	/* Set Sensitivity field ids, when there is no individual modifier */
-	if (st->common_attributes.sensitivity.index < 0) {
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
 		sensor_hub_input_get_attribute_info(hsdev,
 			HID_FEATURE_REPORT, usage_id,
 			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
 			HID_USAGE_SENSOR_DATA_ORIENTATION,
-			&st->common_attributes.sensitivity);
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->magn_flux_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_MAGN_FLUX,
+			&st->magn_flux_attributes.sensitivity);
+		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
+			st->magn_flux_attributes.sensitivity.index,
+			st->magn_flux_attributes.sensitivity.report_id);
+	}
+	if (st->rot_attributes.sensitivity.index < 0) {
+		sensor_hub_input_get_attribute_info(hsdev,
+			HID_FEATURE_REPORT, usage_id,
+			HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
+			HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH,
+			&st->rot_attributes.sensitivity);
 		dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
-			st->common_attributes.sensitivity.index,
-			st->common_attributes.sensitivity.report_id);
+			st->rot_attributes.sensitivity.index,
+			st->rot_attributes.sensitivity.report_id);
 	}
 
 	return 0;
@@ -428,16 +504,17 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, indio_dev);
 
 	magn_state = iio_priv(indio_dev);
-	magn_state->common_attributes.hsdev = hsdev;
-	magn_state->common_attributes.pdev = pdev;
+	magn_state->magn_flux_attributes.hsdev = hsdev;
+	magn_state->magn_flux_attributes.pdev = pdev;
 
 	ret = hid_sensor_parse_common_attributes(hsdev,
 				HID_USAGE_SENSOR_COMPASS_3D,
-				&magn_state->common_attributes);
+				&magn_state->magn_flux_attributes);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to setup common attributes\n");
 		return ret;
 	}
+	magn_state->rot_attributes = magn_state->magn_flux_attributes;
 
 	ret = magn_3d_parse_report(pdev, hsdev,
 				&channels, &chan_count,
@@ -460,9 +537,9 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
 		return ret;
 	}
-	atomic_set(&magn_state->common_attributes.data_ready, 0);
+	atomic_set(&magn_state->magn_flux_attributes.data_ready, 0);
 	ret = hid_sensor_setup_trigger(indio_dev, name,
-					&magn_state->common_attributes);
+					&magn_state->magn_flux_attributes);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "trigger setup failed\n");
 		goto error_unreg_buffer_funcs;
@@ -489,7 +566,7 @@ static int hid_magn_3d_probe(struct platform_device *pdev)
 error_iio_unreg:
 	iio_device_unregister(indio_dev);
 error_remove_trigger:
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 error_unreg_buffer_funcs:
 	iio_triggered_buffer_cleanup(indio_dev);
 	return ret;
@@ -504,7 +581,7 @@ static int hid_magn_3d_remove(struct platform_device *pdev)
 
 	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_COMPASS_3D);
 	iio_device_unregister(indio_dev);
-	hid_sensor_remove_trigger(&magn_state->common_attributes);
+	hid_sensor_remove_trigger(&magn_state->magn_flux_attributes);
 	iio_triggered_buffer_cleanup(indio_dev);
 
 	return 0;