rtlwifi: rtl8192se: Remove all instances of DBG_EMERG

This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/realtek/rtlwifi/rtl8192se/fw.c

@@ -113,8 +113,7 @@ static u8 _rtl92s_firmware_header_map_rftype(struct ieee80211_hw *hw)
 	case RF_2T2R:
 		return 0x22;
 	default:
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "Unknown RF type(%x)\n",
-			 rtlphy->rf_type);
+		pr_err("Unknown RF type(%x)\n", rtlphy->rf_type);
 		break;
 	}
 	return 0x22;
@@ -168,9 +167,7 @@ static bool _rtl92s_firmware_downloadcode(struct ieee80211_hw *hw,
 	_rtl92s_fw_set_rqpn(hw);
 
 	if (buffer_len >= MAX_FIRMWARE_CODE_SIZE) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Size over FIRMWARE_CODE_SIZE!\n");
-
+		pr_err("Size over FIRMWARE_CODE_SIZE!\n");
 		return false;
 	}
 
@@ -239,9 +236,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 		} while (pollingcnt--);
 
 		if (!(cpustatus & IMEM_CHK_RPT) || (pollingcnt <= 0)) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
-				 cpustatus);
+			pr_err("FW_STATUS_LOAD_IMEM FAIL CPU, Status=%x\n",
+			       cpustatus);
 			goto status_check_fail;
 		}
 		break;
@@ -257,17 +253,15 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 		} while (pollingcnt--);
 
 		if (!(cpustatus & EMEM_CHK_RPT) || (pollingcnt <= 0)) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
-				 cpustatus);
+			pr_err("FW_STATUS_LOAD_EMEM FAIL CPU, Status=%x\n",
+			       cpustatus);
 			goto status_check_fail;
 		}
 
 		/* Turn On CPU */
 		rtstatus = _rtl92s_firmware_enable_cpu(hw);
 		if (!rtstatus) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Enable CPU fail!\n");
+			pr_err("Enable CPU fail!\n");
 			goto status_check_fail;
 		}
 		break;
@@ -282,9 +276,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 		} while (pollingcnt--);
 
 		if (!(cpustatus & DMEM_CODE_DONE) || (pollingcnt <= 0)) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Polling DMEM code done fail ! cpustatus(%#x)\n",
-				 cpustatus);
+			pr_err("Polling DMEM code done fail ! cpustatus(%#x)\n",
+			       cpustatus);
 			goto status_check_fail;
 		}
 
@@ -308,9 +301,8 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 
 		if (((cpustatus & LOAD_FW_READY) != LOAD_FW_READY) ||
 		    (pollingcnt <= 0)) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Polling Load Firmware ready fail ! cpustatus(%x)\n",
-				 cpustatus);
+			pr_err("Polling Load Firmware ready fail ! cpustatus(%x)\n",
+			       cpustatus);
 			goto status_check_fail;
 		}
 
@@ -331,8 +323,7 @@ static bool _rtl92s_firmware_checkready(struct ieee80211_hw *hw,
 		break;
 
 	default:
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-			 "Unknown status check!\n");
+		pr_err("Unknown status check!\n");
 		rtstatus = false;
 		break;
 	}
@@ -380,8 +371,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 	/* 2. Retrieve IMEM image. */
 	if ((pfwheader->img_imem_size == 0) || (pfwheader->img_imem_size >
 	    sizeof(firmware->fw_imem))) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "memory for data image is less than IMEM required\n");
+		pr_err("memory for data image is less than IMEM required\n");
 		goto fail;
 	} else {
 		puc_mappedfile += fwhdr_size;
@@ -393,8 +383,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 
 	/* 3. Retriecve EMEM image. */
 	if (pfwheader->img_sram_size > sizeof(firmware->fw_emem)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "memory for data image is less than EMEM required\n");
+		pr_err("memory for data image is less than EMEM required\n");
 		goto fail;
 	} else {
 		puc_mappedfile += firmware->fw_imem_len;
@@ -428,8 +417,7 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 					RT_8192S_FIRMWARE_HDR_EXCLUDE_PRI_SIZE;
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Unexpected Download step!!\n");
+			pr_err("Unexpected Download step!!\n");
 			goto fail;
 		}
 
@@ -438,14 +426,14 @@ int rtl92s_download_fw(struct ieee80211_hw *hw)
 				ul_filelength);
 
 		if (!rtstatus) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+			pr_err("fail!\n");
 			goto fail;
 		}
 
 		/* <3> Check whether load FW process is ready */
 		rtstatus = _rtl92s_firmware_checkready(hw, fwstatus);
 		if (!rtstatus) {
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "fail!\n");
+			pr_err("rtl8192se: firmware fail!\n");
 			goto fail;
 		}
 

drivers/net/wireless/realtek/rtlwifi/rtl8192se/hw.c

@@ -75,11 +75,9 @@ void rtl92se_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 	case HAL_DEF_WOWLAN:
 		break;
-	default: {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", variable);
-			break;
-		}
+	default:
+		pr_err("switch case %#x not processed\n", variable);
+		break;
 	}
 }
 
@@ -294,9 +292,8 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					acm_ctrl &= (~AcmHw_VoqEn);
 					break;
 				default:
-					RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-						 "switch case %#x not processed\n",
-						 e_aci);
+					pr_err("switch case %#x not processed\n",
+					       e_aci);
 					break;
 				}
 			}
@@ -431,8 +428,7 @@ void rtl92se_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 		}
 		break; }
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", variable);
+		pr_err("switch case %#x not processed\n", variable);
 		break;
 	}
 
@@ -745,9 +741,8 @@ static void _rtl92se_macconfig_before_fwdownload(struct ieee80211_hw *hw)
 	} while (pollingcnt--);
 
 	if (pollingcnt <= 0) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
-			 tmpu1b);
+		pr_err("Polling TXDMA_INIT_VALUE timeout!! Current TCR(%#x)\n",
+		       tmpu1b);
 		tmpu1b = rtl_read_byte(rtlpriv, CMDR);
 		rtl_write_byte(rtlpriv, CMDR, tmpu1b & (~TXDMA_EN));
 		udelay(2);
@@ -1004,7 +999,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
 	if (!rtl92s_phy_mac_config(hw)) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
+		pr_err("MAC Config failed\n");
 		err = rtstatus;
 		goto exit;
 	}
@@ -1024,7 +1019,7 @@ int rtl92se_hw_init(struct ieee80211_hw *hw)
 
 	/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
 	if (!rtl92s_phy_bb_config(hw)) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
+		pr_err("BB Config failed\n");
 		err = rtstatus;
 		goto exit;
 	}
@@ -1194,8 +1189,7 @@ static int _rtl92se_set_media_status(struct ieee80211_hw *hw,
 			 "Set Network type to AP!\n");
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Network type %d not supported!\n", type);
+		pr_err("Network type %d not supported!\n", type);
 		return 1;
 
 	}
@@ -1685,8 +1679,7 @@ static void _rtl92se_read_adapter_info(struct ieee80211_hw *hw)
 		break;
 
 	case EEPROM_93C46:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "RTL819X Not boot from eeprom, check it !!\n");
+		pr_err("RTL819X Not boot from eeprom, check it !!\n");
 		return;
 
 	default:
@@ -2030,7 +2023,7 @@ void rtl92se_read_eeprom_info(struct ieee80211_hw *hw)
 		rtlefuse->autoload_failflag = false;
 		_rtl92se_read_adapter_info(hw);
 	} else {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Autoload ERR!!\n");
+		pr_err("Autoload ERR!!\n");
 		rtlefuse->autoload_failflag = true;
 	}
 }
@@ -2463,8 +2456,8 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 			enc_algo = CAM_AES;
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case %#x not processed\n", enc_algo);
+			pr_err("switch case %#x not processed\n",
+			       enc_algo);
 			enc_algo = CAM_TKIP;
 			break;
 		}
@@ -2481,9 +2474,7 @@ void rtl92se_set_key(struct ieee80211_hw *hw, u32 key_index, u8 *p_macaddr,
 					entry_id = rtl_cam_get_free_entry(hw,
 								 p_macaddr);
 					if (entry_id >=  TOTAL_CAM_ENTRY) {
-						RT_TRACE(rtlpriv,
-							 COMP_SEC, DBG_EMERG,
-							 "Can not find free hw security cam entry\n");
+						pr_err("Can not find free hw security cam entry\n");
 						return;
 					}
 				} else {

drivers/net/wireless/realtek/rtlwifi/rtl8192se/led.c

@@ -63,8 +63,8 @@ void rtl92se_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
 		rtl_write_byte(rtlpriv, LEDCFG, ledcfg & 0x0f);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = true;
@@ -99,8 +99,8 @@ void rtl92se_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
 		rtl_write_byte(rtlpriv, LEDCFG, (ledcfg | BIT(3)));
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", pled->ledpin);
+		pr_err("switch case %#x not processed\n",
+		       pled->ledpin);
 		break;
 	}
 	pled->ledon = false;

drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c

@@ -235,7 +235,6 @@ void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
 void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
 				      u8 operation)
 {
-	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
 
 	if (!is_hal_stop(rtlhal)) {
@@ -247,8 +246,7 @@ void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
 			rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "Unknown operation\n");
+			pr_err("Unknown operation\n");
 			break;
 		}
 	}
@@ -288,8 +286,8 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
 		rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 
@@ -313,8 +311,8 @@ void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
 			rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", rtlphy->current_chan_bw);
+		pr_err("unknown bandwidth: %#X\n",
+		       rtlphy->current_chan_bw);
 		break;
 	}
 
@@ -437,9 +435,8 @@ static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
 			}
 			break;
 		default:
-			RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-				 "switch case %#x not processed\n",
-				 currentcmd->cmdid);
+			pr_err("switch case %#x not processed\n",
+			       currentcmd->cmdid);
 			break;
 		}
 
@@ -644,8 +641,8 @@ bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
 			_rtl92se_phy_set_rf_sleep(hw);
 			break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "switch case %#x not processed\n", rfpwr_state);
+		pr_err("switch case %#x not processed\n",
+		       rfpwr_state);
 		bresult = false;
 		break;
 	}
@@ -937,8 +934,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
 	}
 
 	if (!rtstatus) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-			 "Write BB Reg Fail!!\n");
+		pr_err("Write BB Reg Fail!!\n");
 		goto phy_BB8190_Config_ParaFile_Fail;
 	}
 
@@ -951,8 +947,7 @@ static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
 						 BASEBAND_CONFIG_PHY_REG);
 	}
 	if (!rtstatus) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-			 "_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
+		pr_err("_rtl92s_phy_bb_config_parafile(): BB_PG Reg Fail!!\n");
 		goto phy_BB8190_Config_ParaFile_Fail;
 	}
 
@@ -1077,12 +1072,10 @@ bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
 	    (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
 	    (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
 	    (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-			 "RF_Type(%x) does not match RF_Num(%x)!!\n",
-			 rtlphy->rf_type, rf_num);
-		RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
-			 "path1 0x%x, path2 0x%x, pathmap 0x%x\n",
-			 path1, path2, pathmap);
+		pr_err("RF_Type(%x) does not match RF_Num(%x)!!\n",
+		       rtlphy->rf_type, rf_num);
+		pr_err("path1 0x%x, path2 0x%x, pathmap 0x%x\n",
+		       path1, path2, pathmap);
 	}
 
 	return rtstatus;
@@ -1221,7 +1214,7 @@ void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
 	} while (--pollingcnt);
 
 	if (pollingcnt == 0)
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Set FW Cmd fail!!\n");
+		pr_err("Set FW Cmd fail!!\n");
 }
 
 

drivers/net/wireless/realtek/rtlwifi/rtl8192se/rf.c

@@ -523,8 +523,7 @@ void rtl92s_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
 					rtlphy->rfreg_chnlval[0]);
 		break;
 	default:
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "unknown bandwidth: %#X\n", bandwidth);
+		pr_err("unknown bandwidth: %#X\n", bandwidth);
 		break;
 	}
 }

drivers/net/wireless/realtek/rtlwifi/rtl8192se/sw.c

@@ -96,8 +96,7 @@ static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
 		return;
 	}
 	if (firmware->size > rtlpriv->max_fw_size) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Firmware is too big!\n");
+		pr_err("Firmware is too big!\n");
 		rtlpriv->max_fw_size = 0;
 		release_firmware(firmware);
 		return;
@@ -218,8 +217,7 @@ static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
 				      rtlpriv->io.dev, GFP_KERNEL, hw,
 				      rtl92se_fw_cb);
 	if (err) {
-		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
-			 "Failed to request firmware!\n");
+		pr_err("Failed to request firmware!\n");
 		return 1;
 	}
 
@@ -299,7 +297,7 @@ static struct rtl_mod_params rtl92se_mod_params = {
 	.inactiveps = true,
 	.swctrl_lps = true,
 	.fwctrl_lps = false,
-	.debug = DBG_EMERG,
+	.debug = 0,
 };
 
 /* Because memory R/W bursting will cause system hang/crash