Revert "Bluetooth: btusb: Add workaround for Broadcom devices without product id"

Commit 9834e586fa66 ("Bluetooth: btusb: Add workaround for Broadcom devices
without product id") was added to deal with the BT part of the BCM4356A2
on GPD pocket laptops having an usb vid:pid of 0000:0000.

After another commit to add support for the BCM UART connected BT ACPI-id
BCM2E7E used on the GPD win, it turns out that the BT on the GPD pocket is
connected via both USB and UART. Adding support for the BCM2E7E ACPI-id
causes it to switch to UART mode.

The Windows shipped with the device is using it in UART mode and the
presence of the BCM2E7E ACPI-id combined with the all 0 USB vid:pid
indicates that the BT part was never meant to be used in USB mode.

With the recent patches to use serdev device enumeration / instantiation
for UART attached ACPI enumerated BT devices, everything work OOTB in UART
mode and the workaround for the all 0 USB vid:pid is no longer needed.

This reverts commit 9834e586fa ("Bluetooth: btusb: Add workaround for
Broadcom devices without product id").

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

drivers/bluetooth/btusb.c

@@ -66,7 +66,6 @@ static struct usb_driver btusb_driver;
 #define BTUSB_BCM2045		0x40000
 #define BTUSB_IFNUM_2		0x80000
 #define BTUSB_CW6622		0x100000
-#define BTUSB_BCM_NO_PRODID	0x200000
 
 static const struct usb_device_id btusb_table[] = {
 	/* Generic Bluetooth USB device */
@@ -171,10 +170,6 @@ static const struct usb_device_id btusb_table[] = {
 	{ USB_VENDOR_AND_INTERFACE_INFO(0x0930, 0xff, 0x01, 0x01),
 	  .driver_info = BTUSB_BCM_PATCHRAM },
 
-	/* Broadcom devices with missing product id */
-	{ USB_DEVICE_AND_INTERFACE_INFO(0x0000, 0x0000, 0xff, 0x01, 0x01),
-	  .driver_info = BTUSB_BCM_PATCHRAM | BTUSB_BCM_NO_PRODID },
-
 	/* Intel Bluetooth USB Bootloader (RAM module) */
 	{ USB_DEVICE(0x8087, 0x0a5a),
 	  .driver_info = BTUSB_INTEL_BOOT | BTUSB_BROKEN_ISOC },
@@ -2909,19 +2904,6 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info == BTUSB_IGNORE)
 		return -ENODEV;
 
-	if (id->driver_info & BTUSB_BCM_NO_PRODID) {
-		struct usb_device *udev = interface_to_usbdev(intf);
-
-		/* For the broken Broadcom devices that show 0000:0000
-		 * as USB vendor and product information, check that the
-		 * manufacturer string identifies them as Broadcom based
-		 * devices.
-		 */
-		if (!udev->manufacturer ||
-		    strcmp(udev->manufacturer, "Broadcom Corp"))
-			return -ENODEV;
-	}
-
 	if (id->driver_info & BTUSB_ATH3012) {
 		struct usb_device *udev = interface_to_usbdev(intf);