Merge branch 'perf/urgent' into perf/core

Conflicts:
	kernel/events/hw_breakpoint.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-ata

@@ -1,110 +1,139 @@
 What:		/sys/class/ata_...
-Date:		August 2008
-Contact:	Gwendal Grignou<gwendal@google.com>
 Description:
-
-Provide a place in sysfs for storing the ATA topology of the system.  This allows
-retrieving various information about ATA objects.
+		Provide a place in sysfs for storing the ATA topology of the
+		system. This allows retrieving various information about ATA
+		objects.
 
 Files under /sys/class/ata_port
 -------------------------------
 
-	For each port, a directory ataX is created where X is the ata_port_id of
-	the port. The device parent is the ata host device.
+For each port, a directory ataX is created where X is the ata_port_id of the
+port. The device parent is the ata host device.
 
-idle_irq (read)
 
-	Number of IRQ received by the port while idle [some ata HBA only].
+What:		/sys/class/ata_port/ataX/nr_pmp_links
+What:		/sys/class/ata_port/ataX/idle_irq
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		nr_pmp_links:	(RO) If a SATA Port Multiplier (PM) is
+				connected, the number of links behind it.
 
-nr_pmp_links (read)
+		idle_irq:	(RO) Number of IRQ received by the port while
+				idle [some ata HBA only].
 
-	If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+What:		/sys/class/ata_port/ataX/port_no
+Date:		May, 2013
+KernelVersion:	v3.11
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		(RO) Host local port number. While registering host controller,
+		port numbers are tracked based upon number of ports available on
+		the controller. This attribute is needed by udev for composing
+		persistent links in /dev/disk/by-path.
 
 Files under /sys/class/ata_link
 -------------------------------
 
-	Behind each port, there is a ata_link. If there is a SATA PM in the
-	topology, 15 ata_link objects are created.
-
-	If a link is behind a port, the directory name is linkX, where X is
-	ata_port_id of the port.
-	If a link is behind a PM, its name is linkX.Y where X is ata_port_id
-	of the parent port and Y the PM port.
+Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
+ata_link objects are created.
 
-hw_sata_spd_limit
+If a link is behind a port, the directory name is linkX, where X is ata_port_id
+of the port. If a link is behind a PM, its name is linkX.Y where X is
+ata_port_id of the parent port and Y the PM port.
 
-	Maximum speed supported by the connected SATA device.
 
-sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/sata_spd_limit
+What:		/sys/class/ata_link/linkX[.Y]/sata_spd
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		hw_sata_spd_limit:	(RO) Maximum speed supported by the
+					connected SATA device.
 
-	Maximum speed imposed by libata.
+		sata_spd_limit:		(RO) Maximum speed imposed by libata.
 
-sata_spd
+		sata_spd:		(RO) Current speed of the link
+					eg. 1.5, 3 Gbps etc.
 
-	Current speed of the link [1.5, 3Gps,...].
 
 Files under /sys/class/ata_device
 ---------------------------------
 
-	Behind each link, up to two ata device are created.
-	The name of the directory is devX[.Y].Z where:
-	- X is ata_port_id of the port where the device is connected,
-	- Y the port of the PM if any, and
-	- Z the device id: for PATA, there is usually 2 devices [0,1],
-	only 1 for SATA.
-
-class
-	Device class. Can be "ata" for disk, "atapi" for packet device,
-	"pmp" for PM, or "none" if no device was found behind the link.
-
-dma_mode
+Behind each link, up to two ata devices are created.
+The name of the directory is devX[.Y].Z where:
+- X is ata_port_id of the port where the device is connected,
+- Y the port of the PM if any, and
+- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.
+
+
+What:		/sys/class/ata_device/devX[.Y].Z/spdn_cnt
+What:		/sys/class/ata_device/devX[.Y].Z/gscr
+What:		/sys/class/ata_device/devX[.Y].Z/ering
+What:		/sys/class/ata_device/devX[.Y].Z/id
+What:		/sys/class/ata_device/devX[.Y].Z/pio_mode
+What:		/sys/class/ata_device/devX[.Y].Z/xfer_mode
+What:		/sys/class/ata_device/devX[.Y].Z/dma_mode
+What:		/sys/class/ata_device/devX[.Y].Z/class
+Date:		May, 2010
+KernelVersion:	v2.6.37
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		spdn_cnt:	(RO) Number of times libata decided to lower the
+				speed of link due to errors.
 
-	Transfer modes supported by the device when in DMA mode.
-	Mostly used by PATA device.
+		gscr:		(RO) Cached result of the dump of PM GSCR
+				register. Valid registers are:
 
-pio_mode
+				0:      SATA_PMP_GSCR_PROD_ID,
+				1:	SATA_PMP_GSCR_REV,
+				2:      SATA_PMP_GSCR_PORT_INFO,
+				32:     SATA_PMP_GSCR_ERROR,
+				33:     SATA_PMP_GSCR_ERROR_EN,
+				64:     SATA_PMP_GSCR_FEAT,
+				96:     SATA_PMP_GSCR_FEAT_EN,
+				130:    SATA_PMP_GSCR_SII_GPIO
 
-	Transfer modes supported by the device when in PIO mode.
-	Mostly used by PATA device.
+				Only valid if the device is a PM.
 
-xfer_mode
+		ering:		(RO) Formatted output of the error ring of the
+				device.
 
-	Current transfer mode.
+		id:		(RO) Cached result of IDENTIFY command, as
+				described in ATA8 7.16 and 7.17. Only valid if
+				the device is not a PM.
 
-id
+		pio_mode:	(RO) Transfer modes supported by the device when
+				in PIO mode. Mostly used by PATA device.
 
-	Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
-	Only valid if the device is not a PM.
+		xfer_mode:	(RO) Current transfer mode
 
-gscr
+		dma_mode:	(RO) Transfer modes supported by the device when
+				in DMA mode. Mostly used by PATA device.
 
-	Cached result of the dump of PM GSCR register.
-	Valid registers are:
-	0: 	SATA_PMP_GSCR_PROD_ID,
-	1: 	SATA_PMP_GSCR_REV,
-	2: 	SATA_PMP_GSCR_PORT_INFO,
-	32:	SATA_PMP_GSCR_ERROR,
-	33:	SATA_PMP_GSCR_ERROR_EN,
-	64:	SATA_PMP_GSCR_FEAT,
-	96:	SATA_PMP_GSCR_FEAT_EN,
-	130:	SATA_PMP_GSCR_SII_GPIO
-	Only valid if the device is a PM.
+		class:		(RO) Device class. Can be "ata" for disk,
+				"atapi" for packet device, "pmp" for PM, or
+				"none" if no device was found behind the link.
 
-trim
 
-	Shows the DSM TRIM mode currently used by the device. Valid
-	values are:
-	unsupported:		Drive does not support DSM TRIM
-	unqueued:		Drive supports unqueued DSM TRIM only
-	queued:			Drive supports queued DSM TRIM
-	forced_unqueued:	Drive's queued DSM support is known to be
-				buggy and only unqueued TRIM commands
-				are sent
+What:		/sys/class/ata_device/devX[.Y].Z/trim
+Date:		May, 2015
+KernelVersion:	v4.10
+Contact:	Gwendal Grignou <gwendal@chromium.org>
+Description:
+		(RO) Shows the DSM TRIM mode currently used by the device. Valid
+		values are:
 
-spdn_cnt
+		unsupported:		Drive does not support DSM TRIM
 
-	Number of time libata decided to lower the speed of link due to errors.
+		unqueued:               Drive supports unqueued DSM TRIM only
 
-ering
+		queued:                 Drive supports queued DSM TRIM
 
-	Formatted output of the error ring of the device.
+		forced_unqueued:	Drive's queued DSM support is known to
+					be buggy and only unqueued TRIM commands
+					are sent

Documentation/ABI/testing/sysfs-block-device

@@ -0,0 +1,58 @@
+What:		/sys/block/*/device/sw_activity
+Date:		Jun, 2008
+KernelVersion:	v2.6.27
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Used by drivers which support software controlled activity
+		LEDs.
+
+		It has the following valid values:
+
+		0	OFF - the LED is not activated on activity
+		1	BLINK_ON - the LED blinks on every 10ms when activity is
+			detected.
+		2	BLINK_OFF - the LED is on when idle, and blinks off
+			every 10ms when activity is detected.
+
+		Note that the user must turn sw_activity OFF it they wish to
+		control the activity LED via the em_message file.
+
+
+What:		/sys/block/*/device/unload_heads
+Date:		Sep, 2008
+KernelVersion:	v2.6.28
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Hard disk shock protection
+
+		Writing an integer value to this file will take the heads of the
+		respective drive off the platter and block all I/O operations
+		for the specified number of milliseconds.
+
+		- If the device does not support the unload heads feature,
+		  access is denied with -EOPNOTSUPP.
+		- The maximal value accepted for a timeout is 30000
+		  milliseconds.
+		- A previously set timeout can be cancelled and disk can resume
+		  normal operation immediately by specifying a timeout of 0.
+		- Some hard drives only comply with an earlier version of the
+		  ATA standard, but support the unload feature nonetheless.
+		  There is no safe way Linux can detect these devices, so this
+		  is not enabled by default. If it is known that your device
+		  does support the unload feature, then you can tell the kernel
+		  to enable it by writing -1. It can be disabled again by
+		  writing -2.
+		- Values below -2 are rejected with -EINVAL
+
+		For more information, see
+		Documentation/laptops/disk-shock-protection.txt
+
+
+What:		/sys/block/*/device/ncq_prio_enable
+Date:		Oct, 2016
+KernelVersion:	v4.10
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Write to the file to turn on or off the SATA ncq (native
+		command queueing) support. By default this feature is turned
+		off.

Documentation/ABI/testing/sysfs-class-scsi_host

@@ -27,3 +27,92 @@ Description:	This file contains the current status of the "SSD Smart Path"
 		the direct i/o path to physical devices.  This setting is
 		controller wide, affecting all configured logical drives on the
 		controller.  This file is readable and writable.
+
+What:		/sys/class/scsi_host/hostX/link_power_management_policy
+Date:		Oct, 2007
+KernelVersion:	v2.6.24
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) This parameter allows the user to read and set the link
+		(interface) power management.
+
+		There are four possible options:
+
+		min_power: Tell the controller to try to make the link use the
+		least possible power when possible. This may sacrifice some
+		performance due to increased latency when coming out of lower
+		power states.
+
+		max_performance: Generally, this means no power management.
+		Tell the controller to have performance be a priority over power
+		management.
+
+		medium_power: Tell the controller to enter a lower power state
+		when possible, but do not enter the lowest power state, thus
+		improving latency over min_power setting.
+
+		med_power_with_dipm: Identical to the existing medium_power
+		setting except that it enables dipm (device initiated power
+		management) on top, which makes it match the Windows IRST (Intel
+		Rapid Storage Technology) driver settings. This setting is also
+		close to min_power, except that:
+		a) It does not use host-initiated slumber mode, but it does
+		allow device-initiated slumber
+		b) It does not enable low power device sleep mode (DevSlp).
+
+What:		/sys/class/scsi_host/hostX/em_message
+What:		/sys/class/scsi_host/hostX/em_message_type
+Date:		Jun, 2008
+KernelVersion:	v2.6.27
+Contact:	linux-ide@vger.kernel.org
+Description:
+		em_message: (RW) Enclosure management support. For the LED
+		protocol, writes and reads correspond to the LED message format
+		as defined in the AHCI spec.
+
+		The user must turn sw_activity (under /sys/block/*/device/) OFF
+		it they wish to control the activity LED via the em_message
+		file.
+
+		em_message_type: (RO) Displays the current enclosure management
+		protocol that is being used by the driver (for eg. LED, SAF-TE,
+		SES-2, SGPIO etc).
+
+What:		/sys/class/scsi_host/hostX/ahci_port_cmd
+What:		/sys/class/scsi_host/hostX/ahci_host_caps
+What:		/sys/class/scsi_host/hostX/ahci_host_cap2
+Date:		Mar, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-ide@vger.kernel.org
+Description:
+		[to be documented]
+
+What:		/sys/class/scsi_host/hostX/ahci_host_version
+Date:		Mar, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RO) Display the version of the AHCI spec implemented by the
+		host.
+
+What:		/sys/class/scsi_host/hostX/em_buffer
+Date:		Apr, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RW) Allows access to AHCI EM (enclosure management) buffer
+		directly if the host supports EM.
+
+		For eg. the AHCI driver supports SGPIO EM messages but the
+		SATA/AHCI specs do not define the SGPIO message format of the EM
+		buffer. Different hardware(HW) vendors may have different
+		definitions. With the em_buffer attribute, this issue can be
+		solved by allowing HW vendors to provide userland drivers and
+		tools for their SGPIO initiators.
+
+What:		/sys/class/scsi_host/hostX/em_message_supported
+Date:		Oct, 2009
+KernelVersion:	v2.6.39
+Contact:	linux-ide@vger.kernel.org
+Description:
+		(RO) Displays supported enclosure management message types.

Documentation/devicetree/bindings/display/exynos/exynos_hdmi.txt

@@ -16,6 +16,7 @@ Required properties:
 - ddc: phandle to the hdmi ddc node
 - phy: phandle to the hdmi phy node
 - samsung,syscon-phandle: phandle for system controller node for PMU.
+- #sound-dai-cells: should be 0.
 
 Required properties for Exynos 4210, 4212, 5420 and 5433:
 - clocks: list of clock IDs from SoC clock driver.

Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt

@@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator
 Required properties:
 - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
 	as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
 
 Example node:
 
 	ads1202: adc@0 {
 		compatible = "sd-modulator";
-		#io-channel-cells = <1>;
+		#io-channel-cells = <0>;
 	};

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -50,14 +50,15 @@ Example:
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
 		};
 	};
@@ -74,23 +75,24 @@ Example:
 			compatible = "marvell,mv88e6390";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
-		};
 
-		mdio1 {
-			compatible = "marvell,mv88e6xxx-mdio-external";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy9: switch1phy0@9 {
-				reg = <9>;
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy9: switch1phy0@9 {
+					reg = <9>;
+				};
 			};
 		};
 	};

Documentation/devicetree/bindings/net/renesas,ravb.txt

@@ -27,7 +27,11 @@ Required properties:
 	SoC-specific version corresponding to the platform first followed by
 	the generic version.
 
-- reg: offset and length of (1) the register block and (2) the stream buffer.
+- reg: Offset and length of (1) the register block and (2) the stream buffer.
+       The region for the register block is mandatory.
+       The region for the stream buffer is optional, as it is only present on
+       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796),
+       and M3-N (R8A77965).
 - interrupts: A list of interrupt-specifiers, one for each entry in
 	      interrupt-names.
 	      If interrupt-names is not present, an interrupt specifier

Documentation/networking/segmentation-offloads.txt

@@ -20,8 +20,8 @@ TCP Segmentation Offload
 
 TCP segmentation allows a device to segment a single frame into multiple
 frames with a data payload size specified in skb_shinfo()->gso_size.
-When TCP segmentation requested the bit for either SKB_GSO_TCP or
-SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and
+When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or
+SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and
 skb_shinfo()->gso_size should be set to a non-zero value.
 
 TCP segmentation is dependent on support for the use of partial checksum
@@ -153,8 +153,18 @@ To signal this, gso_size is set to the special value GSO_BY_FRAGS.
 
 Therefore, any code in the core networking stack must be aware of the
 possibility that gso_size will be GSO_BY_FRAGS and handle that case
-appropriately. (For size checks, the skb_gso_validate_*_len family of
-helpers do this automatically.)
+appropriately.
+
+There are some helpers to make this easier:
+
+ - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if
+   an skb is an SCTP GSO skb.
+
+ - For size checks, the skb_gso_validate_*_len family of helpers correctly
+   considers GSO_BY_FRAGS.
+
+ - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size
+   will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs.
 
 This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits
 set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE.

MAINTAINERS

@@ -10334,7 +10334,7 @@ F:	drivers/oprofile/
 F:	include/linux/oprofile.h
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-M:	Mark Fasheh <mfasheh@versity.com>
+M:	Mark Fasheh <mark@fasheh.com>
 M:	Joel Becker <jlbec@evilplan.org>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://ocfs2.wiki.kernel.org
@@ -10844,6 +10844,7 @@ F:	drivers/platform/x86/peaq-wmi.c
 PER-CPU MEMORY ALLOCATOR
 M:	Tejun Heo <tj@kernel.org>
 M:	Christoph Lameter <cl@linux.com>
+M:	Dennis Zhou <dennisszhou@gmail.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
 S:	Maintained
 F:	include/linux/percpu*.h

Makefile

@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 16
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc7
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*
@@ -826,6 +826,15 @@ KBUILD_CFLAGS += $(call cc-disable-warning, pointer-sign)
 # disable invalid "can't wrap" optimizations for signed / pointers
 KBUILD_CFLAGS	+= $(call cc-option,-fno-strict-overflow)
 
+# clang sets -fmerge-all-constants by default as optimization, but this
+# is non-conforming behavior for C and in fact breaks the kernel, so we
+# need to disable it here generally.
+KBUILD_CFLAGS	+= $(call cc-option,-fno-merge-all-constants)
+
+# for gcc -fno-merge-all-constants disables everything, but it is fine
+# to have actual conforming behavior enabled.
+KBUILD_CFLAGS	+= $(call cc-option,-fmerge-constants)
+
 # Make sure -fstack-check isn't enabled (like gentoo apparently did)
 KBUILD_CFLAGS  += $(call cc-option,-fno-stack-check,)
 

arch/arm64/mm/mmu.c

@@ -972,3 +972,13 @@ int pmd_clear_huge(pmd_t *pmdp)
 	pmd_clear(pmdp);
 	return 1;
 }
+
+int pud_free_pmd_page(pud_t *pud)
+{
+	return pud_none(*pud);
+}
+
+int pmd_free_pte_page(pmd_t *pmd)
+{
+	return pmd_none(*pmd);
+}

arch/h8300/include/asm/byteorder.h

@@ -2,7 +2,6 @@
 #ifndef __H8300_BYTEORDER_H__
 #define __H8300_BYTEORDER_H__
 
-#define __BIG_ENDIAN __ORDER_BIG_ENDIAN__
 #include <linux/byteorder/big_endian.h>
 
 #endif

arch/mips/lantiq/Kconfig

@@ -13,6 +13,8 @@ choice
 config SOC_AMAZON_SE
 	bool "Amazon SE"
 	select SOC_TYPE_XWAY
+	select MFD_SYSCON
+	select MFD_CORE
 
 config SOC_XWAY
 	bool "XWAY"

arch/mips/lantiq/xway/sysctrl.c

@@ -549,9 +549,9 @@ void __init ltq_soc_init(void)
 		clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
 				ltq_ar9_fpi_hz(), CLOCK_250M);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
-		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
-		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
+		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
 		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
@@ -560,7 +560,7 @@ void __init ltq_soc_init(void)
 	} else {
 		clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
 				ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
-		clkdev_add_pmu("1f203018.usb2-phy", "ctrl", 1, 0, PMU_USB0);
+		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);

arch/mips/ralink/mt7621.c

@@ -170,6 +170,28 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 	u32 n1;
 	u32 rev;
 
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cps_numiocu(0)) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+		__sync();
+	}
+
 	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
 	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
 
@@ -194,26 +216,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
 
 	rt2880_pinmux_data = mt7621_pinmux_data;
 
-	/* Early detection of CMP support */
-	mips_cm_probe();
-	mips_cpc_probe();
-
-	if (mips_cps_numiocu(0)) {
-		/*
-		 * mips_cm_probe() wipes out bootloader
-		 * config for CM regions and we have to configure them
-		 * again. This SoC cannot talk to pamlbus devices
-		 * witout proper iocu region set up.
-		 *
-		 * FIXME: it would be better to do this with values
-		 * from DT, but we need this very early because
-		 * without this we cannot talk to pretty much anything
-		 * including serial.
-		 */
-		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
-		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
-				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
-	}
 
 	if (!register_cps_smp_ops())
 		return;

arch/mips/ralink/reset.c

@@ -96,16 +96,9 @@ static void ralink_restart(char *command)
 	unreachable();
 }
 
-static void ralink_halt(void)
-{
-	local_irq_disable();
-	unreachable();
-}
-
 static int __init mips_reboot_setup(void)
 {
 	_machine_restart = ralink_restart;
-	_machine_halt = ralink_halt;
 
 	return 0;
 }

arch/x86/Kconfig.cpu

@@ -315,19 +315,6 @@ config X86_L1_CACHE_SHIFT
 	default "4" if MELAN || M486 || MGEODEGX1
 	default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX
 
-config X86_PPRO_FENCE
-	bool "PentiumPro memory ordering errata workaround"
-	depends on M686 || M586MMX || M586TSC || M586 || M486 || MGEODEGX1
-	---help---
-	  Old PentiumPro multiprocessor systems had errata that could cause
-	  memory operations to violate the x86 ordering standard in rare cases.
-	  Enabling this option will attempt to work around some (but not all)
-	  occurrences of this problem, at the cost of much heavier spinlock and
-	  memory barrier operations.
-
-	  If unsure, say n here. Even distro kernels should think twice before
-	  enabling this: there are few systems, and an unlikely bug.
-
 config X86_F00F_BUG
 	def_bool y
 	depends on M586MMX || M586TSC || M586 || M486

arch/x86/Makefile

@@ -223,6 +223,15 @@ KBUILD_CFLAGS += $(cfi) $(cfi-sigframe) $(cfi-sections) $(asinstr) $(avx_instr)
 
 LDFLAGS := -m elf_$(UTS_MACHINE)
 
+#
+# The 64-bit kernel must be aligned to 2MB.  Pass -z max-page-size=0x200000 to
+# the linker to force 2MB page size regardless of the default page size used
+# by the linker.
+#
+ifdef CONFIG_X86_64
+LDFLAGS += $(call ld-option, -z max-page-size=0x200000)
+endif
+
 # Speed up the build
 KBUILD_CFLAGS += -pipe
 # Workaround for a gcc prelease that unfortunately was shipped in a suse release

arch/x86/boot/compressed/misc.c

@@ -309,6 +309,10 @@ static void parse_elf(void *output)
 
 		switch (phdr->p_type) {
 		case PT_LOAD:
+#ifdef CONFIG_X86_64
+			if ((phdr->p_align % 0x200000) != 0)
+				error("Alignment of LOAD segment isn't multiple of 2MB");
+#endif
 #ifdef CONFIG_RELOCATABLE
 			dest = output;
 			dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR);

arch/x86/entry/entry_64.S

@@ -1138,7 +1138,7 @@ apicinterrupt3 HYPERV_REENLIGHTENMENT_VECTOR \
 #endif /* CONFIG_HYPERV */
 
 idtentry debug			do_debug		has_error_code=0	paranoid=1 shift_ist=DEBUG_STACK
-idtentry int3			do_int3			has_error_code=0	paranoid=1 shift_ist=DEBUG_STACK
+idtentry int3			do_int3			has_error_code=0
 idtentry stack_segment		do_stack_segment	has_error_code=1
 
 #ifdef CONFIG_XEN

arch/x86/entry/vdso/vdso32/vclock_gettime.c

@@ -5,8 +5,6 @@
 #undef CONFIG_OPTIMIZE_INLINING
 #endif
 
-#undef CONFIG_X86_PPRO_FENCE
-
 #ifdef CONFIG_X86_64
 
 /*

arch/x86/entry/vsyscall/vsyscall_64.c

@@ -347,7 +347,7 @@ void __init set_vsyscall_pgtable_user_bits(pgd_t *root)
 	set_pgd(pgd, __pgd(pgd_val(*pgd) | _PAGE_USER));
 	p4d = p4d_offset(pgd, VSYSCALL_ADDR);
 #if CONFIG_PGTABLE_LEVELS >= 5
-	p4d->p4d |= _PAGE_USER;
+	set_p4d(p4d, __p4d(p4d_val(*p4d) | _PAGE_USER));
 #endif
 	pud = pud_offset(p4d, VSYSCALL_ADDR);
 	set_pud(pud, __pud(pud_val(*pud) | _PAGE_USER));

arch/x86/events/intel/ds.c

@@ -1153,6 +1153,7 @@ static void setup_pebs_sample_data(struct perf_event *event,
 	if (pebs == NULL)
 		return;
 
+	regs->flags &= ~PERF_EFLAGS_EXACT;
 	sample_type = event->attr.sample_type;
 	dsrc = sample_type & PERF_SAMPLE_DATA_SRC;
 
@@ -1197,7 +1198,6 @@ static void setup_pebs_sample_data(struct perf_event *event,
 	 */
 	*regs = *iregs;
 	regs->flags = pebs->flags;
-	set_linear_ip(regs, pebs->ip);
 
 	if (sample_type & PERF_SAMPLE_REGS_INTR) {
 		regs->ax = pebs->ax;
@@ -1233,13 +1233,22 @@ static void setup_pebs_sample_data(struct perf_event *event,
 #endif
 	}
 
-	if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format >= 2) {
-		regs->ip = pebs->real_ip;
-		regs->flags |= PERF_EFLAGS_EXACT;
-	} else if (event->attr.precise_ip > 1 && intel_pmu_pebs_fixup_ip(regs))
-		regs->flags |= PERF_EFLAGS_EXACT;
-	else
-		regs->flags &= ~PERF_EFLAGS_EXACT;
+	if (event->attr.precise_ip > 1) {
+		/* Haswell and later have the eventing IP, so use it: */
+		if (x86_pmu.intel_cap.pebs_format >= 2) {
+			set_linear_ip(regs, pebs->real_ip);
+			regs->flags |= PERF_EFLAGS_EXACT;
+		} else {
+			/* Otherwise use PEBS off-by-1 IP: */
+			set_linear_ip(regs, pebs->ip);
+
+			/* ... and try to fix it up using the LBR entries: */
+			if (intel_pmu_pebs_fixup_ip(regs))
+				regs->flags |= PERF_EFLAGS_EXACT;
+		}
+	} else
+		set_linear_ip(regs, pebs->ip);
+
 
 	if ((sample_type & (PERF_SAMPLE_ADDR | PERF_SAMPLE_PHYS_ADDR)) &&
 	    x86_pmu.intel_cap.pebs_format >= 1)

arch/x86/include/asm/barrier.h

@@ -52,11 +52,7 @@ static inline unsigned long array_index_mask_nospec(unsigned long index,
 #define barrier_nospec() alternative_2("", "mfence", X86_FEATURE_MFENCE_RDTSC, \
 					   "lfence", X86_FEATURE_LFENCE_RDTSC)
 
-#ifdef CONFIG_X86_PPRO_FENCE
-#define dma_rmb()	rmb()
-#else
 #define dma_rmb()	barrier()
-#endif
 #define dma_wmb()	barrier()
 
 #ifdef CONFIG_X86_32
@@ -68,30 +64,6 @@ static inline unsigned long array_index_mask_nospec(unsigned long index,
 #define __smp_wmb()	barrier()
 #define __smp_store_mb(var, value) do { (void)xchg(&var, value); } while (0)
 
-#if defined(CONFIG_X86_PPRO_FENCE)
-
-/*
- * For this option x86 doesn't have a strong TSO memory
- * model and we should fall back to full barriers.
- */
-
-#define __smp_store_release(p, v)					\
-do {									\
-	compiletime_assert_atomic_type(*p);				\
-	__smp_mb();							\
-	WRITE_ONCE(*p, v);						\
-} while (0)
-
-#define __smp_load_acquire(p)						\
-({									\
-	typeof(*p) ___p1 = READ_ONCE(*p);				\
-	compiletime_assert_atomic_type(*p);				\
-	__smp_mb();							\
-	___p1;								\
-})
-
-#else /* regular x86 TSO memory ordering */
-
 #define __smp_store_release(p, v)					\
 do {									\
 	compiletime_assert_atomic_type(*p);				\
@@ -107,8 +79,6 @@ do {									\
 	___p1;								\
 })
 
-#endif
-
 /* Atomic operations are already serializing on x86 */
 #define __smp_mb__before_atomic()	barrier()
 #define __smp_mb__after_atomic()	barrier()

arch/x86/include/asm/io.h

@@ -232,21 +232,6 @@ extern void set_iounmap_nonlazy(void);
  */
 #define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
 
-/*
- *	Cache management
- *
- *	This needed for two cases
- *	1. Out of order aware processors
- *	2. Accidentally out of order processors (PPro errata #51)
- */
-
-static inline void flush_write_buffers(void)
-{
-#if defined(CONFIG_X86_PPRO_FENCE)
-	asm volatile("lock; addl $0,0(%%esp)": : :"memory");
-#endif
-}
-
 #endif /* __KERNEL__ */
 
 extern void native_io_delay(void);

arch/x86/include/asm/vmx.h

@@ -352,6 +352,7 @@ enum vmcs_field {
 #define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_HARD_EXCEPTION	(3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
+#define INTR_TYPE_PRIV_SW_EXCEPTION	(5 << 8) /* ICE breakpoint - undocumented */
 #define INTR_TYPE_SOFT_EXCEPTION	(6 << 8) /* software exception */
 
 /* GUEST_INTERRUPTIBILITY_INFO flags. */

arch/x86/kernel/idt.c

@@ -160,7 +160,6 @@ static const __initconst struct idt_data early_pf_idts[] = {
  */
 static const __initconst struct idt_data dbg_idts[] = {
 	INTG(X86_TRAP_DB,	debug),
-	INTG(X86_TRAP_BP,	int3),
 };
 #endif
 
@@ -183,7 +182,6 @@ gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
 static const __initconst struct idt_data ist_idts[] = {
 	ISTG(X86_TRAP_DB,	debug,		DEBUG_STACK),
 	ISTG(X86_TRAP_NMI,	nmi,		NMI_STACK),
-	SISTG(X86_TRAP_BP,	int3,		DEBUG_STACK),
 	ISTG(X86_TRAP_DF,	double_fault,	DOUBLEFAULT_STACK),
 #ifdef CONFIG_X86_MCE
 	ISTG(X86_TRAP_MC,	&machine_check,	MCE_STACK),

arch/x86/kernel/pci-nommu.c

@@ -37,7 +37,6 @@ static dma_addr_t nommu_map_page(struct device *dev, struct page *page,
 	WARN_ON(size == 0);
 	if (!check_addr("map_single", dev, bus, size))
 		return NOMMU_MAPPING_ERROR;
-	flush_write_buffers();
 	return bus;
 }
 
@@ -72,25 +71,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 			return 0;
 		s->dma_length = s->length;
 	}
-	flush_write_buffers();
 	return nents;
 }
 
-static void nommu_sync_single_for_device(struct device *dev,
-			dma_addr_t addr, size_t size,
-			enum dma_data_direction dir)
-{
-	flush_write_buffers();
-}
-
-
-static void nommu_sync_sg_for_device(struct device *dev,
-			struct scatterlist *sg, int nelems,
-			enum dma_data_direction dir)
-{
-	flush_write_buffers();
-}
-
 static int nommu_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return dma_addr == NOMMU_MAPPING_ERROR;
@@ -101,8 +84,6 @@ const struct dma_map_ops nommu_dma_ops = {
 	.free			= dma_generic_free_coherent,
 	.map_sg			= nommu_map_sg,
 	.map_page		= nommu_map_page,
-	.sync_single_for_device = nommu_sync_single_for_device,
-	.sync_sg_for_device	= nommu_sync_sg_for_device,
 	.is_phys		= 1,
 	.mapping_error		= nommu_mapping_error,
 	.dma_supported		= x86_dma_supported,

arch/x86/kernel/traps.c

@@ -577,7 +577,6 @@ do_general_protection(struct pt_regs *regs, long error_code)
 }
 NOKPROBE_SYMBOL(do_general_protection);
 
-/* May run on IST stack. */
 dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 {
 #ifdef CONFIG_DYNAMIC_FTRACE
@@ -592,6 +591,13 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 	if (poke_int3_handler(regs))
 		return;
 
+	/*
+	 * Use ist_enter despite the fact that we don't use an IST stack.
+	 * We can be called from a kprobe in non-CONTEXT_KERNEL kernel
+	 * mode or even during context tracking state changes.
+	 *
+	 * This means that we can't schedule.  That's okay.
+	 */
 	ist_enter(regs);
 	RCU_LOCKDEP_WARN(!rcu_is_watching(), "entry code didn't wake RCU");
 #ifdef CONFIG_KGDB_LOW_LEVEL_TRAP
@@ -609,15 +615,10 @@ dotraplinkage void notrace do_int3(struct pt_regs *regs, long error_code)
 			SIGTRAP) == NOTIFY_STOP)
 		goto exit;
 
-	/*
-	 * Let others (NMI) know that the debug stack is in use
-	 * as we may switch to the interrupt stack.
-	 */
-	debug_stack_usage_inc();
 	cond_local_irq_enable(regs);
 	do_trap(X86_TRAP_BP, SIGTRAP, "int3", regs, error_code, NULL);
 	cond_local_irq_disable(regs);
-	debug_stack_usage_dec();
+
 exit:
 	ist_exit(regs);
 }

arch/x86/kvm/vmx.c

@@ -1045,6 +1045,13 @@ static inline bool is_machine_check(u32 intr_info)
 		(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
 }
 
+/* Undocumented: icebp/int1 */
+static inline bool is_icebp(u32 intr_info)
+{
+	return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+		== (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK);
+}
+
 static inline bool cpu_has_vmx_msr_bitmap(void)
 {
 	return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
@@ -6179,7 +6186,7 @@ static int handle_exception(struct kvm_vcpu *vcpu)
 		      (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
 			vcpu->arch.dr6 &= ~15;
 			vcpu->arch.dr6 |= dr6 | DR6_RTM;
-			if (!(dr6 & ~DR6_RESERVED)) /* icebp */
+			if (is_icebp(intr_info))
 				skip_emulated_instruction(vcpu);
 
 			kvm_queue_exception(vcpu, DB_VECTOR);

arch/x86/mm/init_64.c

@@ -800,17 +800,11 @@ int arch_add_memory(int nid, u64 start, u64 size, struct vmem_altmap *altmap,
 
 #define PAGE_INUSE 0xFD
 
-static void __meminit free_pagetable(struct page *page, int order,
-		struct vmem_altmap *altmap)
+static void __meminit free_pagetable(struct page *page, int order)
 {
 	unsigned long magic;
 	unsigned int nr_pages = 1 << order;
 
-	if (altmap) {
-		vmem_altmap_free(altmap, nr_pages);
-		return;
-	}
-
 	/* bootmem page has reserved flag */
 	if (PageReserved(page)) {
 		__ClearPageReserved(page);
@@ -826,8 +820,16 @@ static void __meminit free_pagetable(struct page *page, int order,
 		free_pages((unsigned long)page_address(page), order);
 }
 
-static void __meminit free_pte_table(pte_t *pte_start, pmd_t *pmd,
+static void __meminit free_hugepage_table(struct page *page,
 		struct vmem_altmap *altmap)
+{
+	if (altmap)
+		vmem_altmap_free(altmap, PMD_SIZE / PAGE_SIZE);
+	else
+		free_pagetable(page, get_order(PMD_SIZE));
+}
+
+static void __meminit free_pte_table(pte_t *pte_start, pmd_t *pmd)
 {
 	pte_t *pte;
 	int i;
@@ -839,14 +841,13 @@ static void __meminit free_pte_table(pte_t *pte_start, pmd_t *pmd,
 	}
 
 	/* free a pte talbe */
-	free_pagetable(pmd_page(*pmd), 0, altmap);
+	free_pagetable(pmd_page(*pmd), 0);
 	spin_lock(&init_mm.page_table_lock);
 	pmd_clear(pmd);
 	spin_unlock(&init_mm.page_table_lock);
 }
 
-static void __meminit free_pmd_table(pmd_t *pmd_start, pud_t *pud,
-		struct vmem_altmap *altmap)
+static void __meminit free_pmd_table(pmd_t *pmd_start, pud_t *pud)
 {
 	pmd_t *pmd;
 	int i;
@@ -858,14 +859,13 @@ static void __meminit free_pmd_table(pmd_t *pmd_start, pud_t *pud,
 	}
 
 	/* free a pmd talbe */
-	free_pagetable(pud_page(*pud), 0, altmap);
+	free_pagetable(pud_page(*pud), 0);
 	spin_lock(&init_mm.page_table_lock);
 	pud_clear(pud);
 	spin_unlock(&init_mm.page_table_lock);
 }
 
-static void __meminit free_pud_table(pud_t *pud_start, p4d_t *p4d,
-		struct vmem_altmap *altmap)
+static void __meminit free_pud_table(pud_t *pud_start, p4d_t *p4d)
 {
 	pud_t *pud;
 	int i;
@@ -877,7 +877,7 @@ static void __meminit free_pud_table(pud_t *pud_start, p4d_t *p4d,
 	}
 
 	/* free a pud talbe */
-	free_pagetable(p4d_page(*p4d), 0, altmap);
+	free_pagetable(p4d_page(*p4d), 0);
 	spin_lock(&init_mm.page_table_lock);
 	p4d_clear(p4d);
 	spin_unlock(&init_mm.page_table_lock);
@@ -885,7 +885,7 @@ static void __meminit free_pud_table(pud_t *pud_start, p4d_t *p4d,
 
 static void __meminit
 remove_pte_table(pte_t *pte_start, unsigned long addr, unsigned long end,
-		 struct vmem_altmap *altmap, bool direct)
+		 bool direct)
 {
 	unsigned long next, pages = 0;
 	pte_t *pte;
@@ -916,7 +916,7 @@ remove_pte_table(pte_t *pte_start, unsigned long addr, unsigned long end,
 			 * freed when offlining, or simplely not in use.
 			 */
 			if (!direct)
-				free_pagetable(pte_page(*pte), 0, altmap);
+				free_pagetable(pte_page(*pte), 0);
 
 			spin_lock(&init_mm.page_table_lock);
 			pte_clear(&init_mm, addr, pte);
@@ -939,7 +939,7 @@ remove_pte_table(pte_t *pte_start, unsigned long addr, unsigned long end,
 
 			page_addr = page_address(pte_page(*pte));
 			if (!memchr_inv(page_addr, PAGE_INUSE, PAGE_SIZE)) {
-				free_pagetable(pte_page(*pte), 0, altmap);
+				free_pagetable(pte_page(*pte), 0);
 
 				spin_lock(&init_mm.page_table_lock);
 				pte_clear(&init_mm, addr, pte);
@@ -974,9 +974,8 @@ remove_pmd_table(pmd_t *pmd_start, unsigned long addr, unsigned long end,
 			if (IS_ALIGNED(addr, PMD_SIZE) &&
 			    IS_ALIGNED(next, PMD_SIZE)) {
 				if (!direct)
-					free_pagetable(pmd_page(*pmd),
-						       get_order(PMD_SIZE),
-						       altmap);
+					free_hugepage_table(pmd_page(*pmd),
+							    altmap);
 
 				spin_lock(&init_mm.page_table_lock);
 				pmd_clear(pmd);
@@ -989,9 +988,8 @@ remove_pmd_table(pmd_t *pmd_start, unsigned long addr, unsigned long end,
 				page_addr = page_address(pmd_page(*pmd));
 				if (!memchr_inv(page_addr, PAGE_INUSE,
 						PMD_SIZE)) {
-					free_pagetable(pmd_page(*pmd),
-						       get_order(PMD_SIZE),
-						       altmap);
+					free_hugepage_table(pmd_page(*pmd),
+							    altmap);
 
 					spin_lock(&init_mm.page_table_lock);
 					pmd_clear(pmd);
@@ -1003,8 +1001,8 @@ remove_pmd_table(pmd_t *pmd_start, unsigned long addr, unsigned long end,
 		}
 
 		pte_base = (pte_t *)pmd_page_vaddr(*pmd);
-		remove_pte_table(pte_base, addr, next, altmap, direct);
-		free_pte_table(pte_base, pmd, altmap);
+		remove_pte_table(pte_base, addr, next, direct);
+		free_pte_table(pte_base, pmd);
 	}
 
 	/* Call free_pmd_table() in remove_pud_table(). */
@@ -1033,8 +1031,7 @@ remove_pud_table(pud_t *pud_start, unsigned long addr, unsigned long end,
 			    IS_ALIGNED(next, PUD_SIZE)) {
 				if (!direct)
 					free_pagetable(pud_page(*pud),
-						       get_order(PUD_SIZE),
-						       altmap);
+						       get_order(PUD_SIZE));
 
 				spin_lock(&init_mm.page_table_lock);
 				pud_clear(pud);
@@ -1048,8 +1045,7 @@ remove_pud_table(pud_t *pud_start, unsigned long addr, unsigned long end,
 				if (!memchr_inv(page_addr, PAGE_INUSE,
 						PUD_SIZE)) {
 					free_pagetable(pud_page(*pud),
-						       get_order(PUD_SIZE),
-						       altmap);
+						       get_order(PUD_SIZE));
 
 					spin_lock(&init_mm.page_table_lock);
 					pud_clear(pud);
@@ -1062,7 +1058,7 @@ remove_pud_table(pud_t *pud_start, unsigned long addr, unsigned long end,
 
 		pmd_base = pmd_offset(pud, 0);
 		remove_pmd_table(pmd_base, addr, next, direct, altmap);
-		free_pmd_table(pmd_base, pud, altmap);
+		free_pmd_table(pmd_base, pud);
 	}
 
 	if (direct)
@@ -1094,7 +1090,7 @@ remove_p4d_table(p4d_t *p4d_start, unsigned long addr, unsigned long end,
 		 * to adapt for boot-time switching between 4 and 5 level page tables.
 		 */
 		if (CONFIG_PGTABLE_LEVELS == 5)
-			free_pud_table(pud_base, p4d, altmap);
+			free_pud_table(pud_base, p4d);
 	}
 
 	if (direct)

arch/x86/mm/pgtable.c

@@ -702,4 +702,52 @@ int pmd_clear_huge(pmd_t *pmd)
 
 	return 0;
 }
+
+/**
+ * pud_free_pmd_page - Clear pud entry and free pmd page.
+ * @pud: Pointer to a PUD.
+ *
+ * Context: The pud range has been unmaped and TLB purged.
+ * Return: 1 if clearing the entry succeeded. 0 otherwise.
+ */
+int pud_free_pmd_page(pud_t *pud)
+{
+	pmd_t *pmd;
+	int i;
+
+	if (pud_none(*pud))
+		return 1;
+
+	pmd = (pmd_t *)pud_page_vaddr(*pud);
+
+	for (i = 0; i < PTRS_PER_PMD; i++)
+		if (!pmd_free_pte_page(&pmd[i]))
+			return 0;
+
+	pud_clear(pud);
+	free_page((unsigned long)pmd);
+
+	return 1;
+}
+
+/**
+ * pmd_free_pte_page - Clear pmd entry and free pte page.
+ * @pmd: Pointer to a PMD.
+ *
+ * Context: The pmd range has been unmaped and TLB purged.
+ * Return: 1 if clearing the entry succeeded. 0 otherwise.
+ */
+int pmd_free_pte_page(pmd_t *pmd)
+{
+	pte_t *pte;
+
+	if (pmd_none(*pmd))
+		return 1;
+
+	pte = (pte_t *)pmd_page_vaddr(*pmd);
+	pmd_clear(pmd);
+	free_page((unsigned long)pte);
+
+	return 1;
+}
 #endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */

arch/x86/net/bpf_jit_comp.c

@@ -1188,7 +1188,7 @@ skip_init_addrs:
 	 * may converge on the last pass. In such case do one more
 	 * pass to emit the final image
 	 */
-	for (pass = 0; pass < 10 || image; pass++) {
+	for (pass = 0; pass < 20 || image; pass++) {
 		proglen = do_jit(prog, addrs, image, oldproglen, &ctx);
 		if (proglen <= 0) {
 			image = NULL;
@@ -1215,6 +1215,7 @@ skip_init_addrs:
 			}
 		}
 		oldproglen = proglen;
+		cond_resched();
 	}
 
 	if (bpf_jit_enable > 1)

arch/x86/platform/efi/efi_64.c

@@ -227,7 +227,7 @@ int __init efi_alloc_page_tables(void)
 	if (!pud) {
 		if (CONFIG_PGTABLE_LEVELS > 4)
 			free_page((unsigned long) pgd_page_vaddr(*pgd));
-		free_page((unsigned long)efi_pgd);
+		free_pages((unsigned long)efi_pgd, PGD_ALLOCATION_ORDER);
 		return -ENOMEM;
 	}
 

arch/x86/um/asm/barrier.h

@@ -30,11 +30,7 @@
 
 #endif /* CONFIG_X86_32 */
 
-#ifdef CONFIG_X86_PPRO_FENCE
-#define dma_rmb()	rmb()
-#else /* CONFIG_X86_PPRO_FENCE */
 #define dma_rmb()	barrier()
-#endif /* CONFIG_X86_PPRO_FENCE */
 #define dma_wmb()	barrier()
 
 #include <asm-generic/barrier.h>

drivers/acpi/acpi_watchdog.c

@@ -74,10 +74,10 @@ void __init acpi_watchdog_init(void)
 		res.start = gas->address;
 		if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
 			res.flags = IORESOURCE_MEM;
-			res.end = res.start + ALIGN(gas->access_width, 4);
+			res.end = res.start + ALIGN(gas->access_width, 4) - 1;
 		} else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
 			res.flags = IORESOURCE_IO;
-			res.end = res.start + gas->access_width;
+			res.end = res.start + gas->access_width - 1;
 		} else {
 			pr_warn("Unsupported address space: %u\n",
 				gas->space_id);

drivers/acpi/battery.c

@@ -70,7 +70,6 @@ static async_cookie_t async_cookie;
 static bool battery_driver_registered;
 static int battery_bix_broken_package;
 static int battery_notification_delay_ms;
-static int battery_full_discharging;
 static unsigned int cache_time = 1000;
 module_param(cache_time, uint, 0644);
 MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
@@ -215,12 +214,9 @@ static int acpi_battery_get_property(struct power_supply *psy,
 		return -ENODEV;
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (battery->state & ACPI_BATTERY_STATE_DISCHARGING) {
-			if (battery_full_discharging && battery->rate_now == 0)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else
-				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-		} else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
+		if (battery->state & ACPI_BATTERY_STATE_DISCHARGING)
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		else if (battery->state & ACPI_BATTERY_STATE_CHARGING)
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (acpi_battery_is_charged(battery))
 			val->intval = POWER_SUPPLY_STATUS_FULL;
@@ -1170,12 +1166,6 @@ battery_notification_delay_quirk(const struct dmi_system_id *d)
 	return 0;
 }
 
-static int __init battery_full_discharging_quirk(const struct dmi_system_id *d)
-{
-	battery_full_discharging = 1;
-	return 0;
-}
-
 static const struct dmi_system_id bat_dmi_table[] __initconst = {
 	{
 		.callback = battery_bix_broken_package_quirk,
@@ -1193,38 +1183,6 @@ static const struct dmi_system_id bat_dmi_table[] __initconst = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-573G"),
 		},
 	},
-	{
-		.callback = battery_full_discharging_quirk,
-		.ident = "ASUS GL502VSK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "GL502VSK"),
-		},
-	},
-	{
-		.callback = battery_full_discharging_quirk,
-		.ident = "ASUS UX305LA",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "UX305LA"),
-		},
-	},
-	{
-		.callback = battery_full_discharging_quirk,
-		.ident = "ASUS UX360UA",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "UX360UA"),
-		},
-	},
-	{
-		.callback = battery_full_discharging_quirk,
-		.ident = "ASUS UX410UAK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "UX410UAK"),
-		},
-	},
 	{},
 };
 

drivers/acpi/nfit/core.c

@@ -2675,10 +2675,14 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc,
 	else
 		ndr_desc->numa_node = NUMA_NO_NODE;
 
-	if(acpi_desc->platform_cap & ACPI_NFIT_CAPABILITY_CACHE_FLUSH)
+	/*
+	 * Persistence domain bits are hierarchical, if
+	 * ACPI_NFIT_CAPABILITY_CACHE_FLUSH is set then
+	 * ACPI_NFIT_CAPABILITY_MEM_FLUSH is implied.
+	 */
+	if (acpi_desc->platform_cap & ACPI_NFIT_CAPABILITY_CACHE_FLUSH)
 		set_bit(ND_REGION_PERSIST_CACHE, &ndr_desc->flags);
-
-	if (acpi_desc->platform_cap & ACPI_NFIT_CAPABILITY_MEM_FLUSH)
+	else if (acpi_desc->platform_cap & ACPI_NFIT_CAPABILITY_MEM_FLUSH)
 		set_bit(ND_REGION_PERSIST_MEMCTRL, &ndr_desc->flags);
 
 	list_for_each_entry(nfit_memdev, &acpi_desc->memdevs, list) {

drivers/acpi/numa.c

@@ -103,25 +103,27 @@ int acpi_map_pxm_to_node(int pxm)
  */
 int acpi_map_pxm_to_online_node(int pxm)
 {
-	int node, n, dist, min_dist;
+	int node, min_node;
 
 	node = acpi_map_pxm_to_node(pxm);
 
 	if (node == NUMA_NO_NODE)
 		node = 0;
 
+	min_node = node;
 	if (!node_online(node)) {
-		min_dist = INT_MAX;
+		int min_dist = INT_MAX, dist, n;
+
 		for_each_online_node(n) {
 			dist = node_distance(node, n);
 			if (dist < min_dist) {
 				min_dist = dist;
-				node = n;
+				min_node = n;
 			}
 		}
 	}
 
-	return node;
+	return min_node;
 }
 EXPORT_SYMBOL(acpi_map_pxm_to_online_node);
 

drivers/ata/ahci.c

@@ -550,7 +550,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	  .driver_data = board_ahci_yes_fbs },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230),
 	  .driver_data = board_ahci_yes_fbs },
-	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642),
+	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0642), /* highpoint rocketraid 642L */
+	  .driver_data = board_ahci_yes_fbs },
+	{ PCI_DEVICE(PCI_VENDOR_ID_TTI, 0x0645), /* highpoint rocketraid 644L */
 	  .driver_data = board_ahci_yes_fbs },
 
 	/* Promise */

drivers/ata/libahci.c

@@ -665,6 +665,16 @@ int ahci_stop_engine(struct ata_port *ap)
 	if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
 		return 0;
 
+	/*
+	 * Don't try to issue commands but return with ENODEV if the
+	 * AHCI controller not available anymore (e.g. due to PCIe hot
+	 * unplugging). Otherwise a 500ms delay for each port is added.
+	 */
+	if (tmp == 0xffffffff) {
+		dev_err(ap->host->dev, "AHCI controller unavailable!\n");
+		return -ENODEV;
+	}
+
 	/* setting HBA to idle */
 	tmp &= ~PORT_CMD_START;
 	writel(tmp, port_mmio + PORT_CMD);

drivers/ata/libahci_platform.c

@@ -340,7 +340,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
  * 2) regulator for controlling the targets power (optional)
  * 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
  *    or for non devicetree enabled platforms a single clock
- *	4) phys (optional)
+ * 4) phys (optional)
  *
  * RETURNS:
  * The allocated ahci_host_priv on success, otherwise an ERR_PTR value

drivers/ata/libata-core.c

@@ -4530,6 +4530,25 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "PIONEER DVD-RW  DVR-212D",	NULL,	ATA_HORKAGE_NOSETXFER },
 	{ "PIONEER DVD-RW  DVR-216D",	NULL,	ATA_HORKAGE_NOSETXFER },
 
+	/* Crucial BX100 SSD 500GB has broken LPM support */
+	{ "CT500BX100SSD1",		NULL,	ATA_HORKAGE_NOLPM },
+
+	/* 512GB MX100 with MU01 firmware has both queued TRIM and LPM issues */
+	{ "Crucial_CT512MX100*",	"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+	/* 512GB MX100 with newer firmware has only LPM issues */
+	{ "Crucial_CT512MX100*",	NULL,	ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
+	/* 480GB+ M500 SSDs have both queued TRIM and LPM issues */
+	{ "Crucial_CT480M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+	{ "Crucial_CT960M500*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NOLPM, },
+
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500_*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -4541,7 +4560,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Crucial_CT*MX100*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
-	{ "Samsung SSD 8*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+	{ "Samsung SSD 840*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
@@ -5401,8 +5422,7 @@ void ata_qc_issue(struct ata_queued_cmd *qc)
 	 * We guarantee to LLDs that they will have at least one
 	 * non-zero sg if the command is a data command.
 	 */
-	if (WARN_ON_ONCE(ata_is_data(prot) &&
-			 (!qc->sg || !qc->n_elem || !qc->nbytes)))
+	if (ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes))
 		goto sys_err;
 
 	if (ata_is_dma(prot) || (ata_is_pio(prot) &&

drivers/ata/libata-eh.c

@@ -815,7 +815,8 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
 
 	if (ap->pflags & ATA_PFLAG_LOADING)
 		ap->pflags &= ~ATA_PFLAG_LOADING;
-	else if (ap->pflags & ATA_PFLAG_SCSI_HOTPLUG)
+	else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
+		!(ap->flags & ATA_FLAG_SAS_HOST))
 		schedule_delayed_work(&ap->hotplug_task, 0);
 
 	if (ap->pflags & ATA_PFLAG_RECOVERED)

drivers/ata/libata-scsi.c

@@ -3316,6 +3316,12 @@ static unsigned int ata_scsi_pass_thru(struct ata_queued_cmd *qc)
 		goto invalid_fld;
 	}
 
+	/* We may not issue NCQ commands to devices not supporting NCQ */
+	if (ata_is_ncq(tf->protocol) && !ata_ncq_enabled(dev)) {
+		fp = 1;
+		goto invalid_fld;
+	}
+
 	/* sanity check for pio multi commands */
 	if ((cdb[1] & 0xe0) && !is_multi_taskfile(tf)) {
 		fp = 1;
@@ -4282,7 +4288,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
 #ifdef ATA_DEBUG
 	struct scsi_device *scsidev = cmd->device;
 
-	DPRINTK("CDB (%u:%d,%d,%d) %9ph\n",
+	DPRINTK("CDB (%u:%d,%d,%lld) %9ph\n",
 		ap->print_id,
 		scsidev->channel, scsidev->id, scsidev->lun,
 		cmd->cmnd);
@@ -4309,7 +4315,9 @@ static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd,
 		if (likely((scsi_op != ATA_16) || !atapi_passthru16)) {
 			/* relay SCSI command to ATAPI device */
 			int len = COMMAND_SIZE(scsi_op);
-			if (unlikely(len > scmd->cmd_len || len > dev->cdb_len))
+			if (unlikely(len > scmd->cmd_len ||
+				     len > dev->cdb_len ||
+				     scmd->cmd_len > ATAPI_CDB_LEN))
 				goto bad_cdb_len;
 
 			xlat_func = atapi_xlat;

drivers/ata/sata_rcar.c

@@ -146,6 +146,7 @@
 enum sata_rcar_type {
 	RCAR_GEN1_SATA,
 	RCAR_GEN2_SATA,
+	RCAR_GEN3_SATA,
 	RCAR_R8A7790_ES1_SATA,
 };
 
@@ -784,26 +785,11 @@ static void sata_rcar_setup_port(struct ata_host *host)
 	ioaddr->command_addr	= ioaddr->cmd_addr + (ATA_REG_CMD << 2);
 }
 
-static void sata_rcar_init_controller(struct ata_host *host)
+static void sata_rcar_init_module(struct sata_rcar_priv *priv)
 {
-	struct sata_rcar_priv *priv = host->private_data;
 	void __iomem *base = priv->base;
 	u32 val;
 
-	/* reset and setup phy */
-	switch (priv->type) {
-	case RCAR_GEN1_SATA:
-		sata_rcar_gen1_phy_init(priv);
-		break;
-	case RCAR_GEN2_SATA:
-	case RCAR_R8A7790_ES1_SATA:
-		sata_rcar_gen2_phy_init(priv);
-		break;
-	default:
-		dev_warn(host->dev, "SATA phy is not initialized\n");
-		break;
-	}
-
 	/* SATA-IP reset state */
 	val = ioread32(base + ATAPI_CONTROL1_REG);
 	val |= ATAPI_CONTROL1_RESET;
@@ -824,10 +810,33 @@ static void sata_rcar_init_controller(struct ata_host *host)
 	/* ack and mask */
 	iowrite32(0, base + SATAINTSTAT_REG);
 	iowrite32(0x7ff, base + SATAINTMASK_REG);
+
 	/* enable interrupts */
 	iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
 }
 
+static void sata_rcar_init_controller(struct ata_host *host)
+{
+	struct sata_rcar_priv *priv = host->private_data;
+
+	/* reset and setup phy */
+	switch (priv->type) {
+	case RCAR_GEN1_SATA:
+		sata_rcar_gen1_phy_init(priv);
+		break;
+	case RCAR_GEN2_SATA:
+	case RCAR_GEN3_SATA:
+	case RCAR_R8A7790_ES1_SATA:
+		sata_rcar_gen2_phy_init(priv);
+		break;
+	default:
+		dev_warn(host->dev, "SATA phy is not initialized\n");
+		break;
+	}
+
+	sata_rcar_init_module(priv);
+}
+
 static const struct of_device_id sata_rcar_match[] = {
 	{
 		/* Deprecated by "renesas,sata-r8a7779" */
@@ -856,7 +865,7 @@ static const struct of_device_id sata_rcar_match[] = {
 	},
 	{
 		.compatible = "renesas,sata-r8a7795",
-		.data = (void *)RCAR_GEN2_SATA
+		.data = (void *)RCAR_GEN3_SATA
 	},
 	{
 		.compatible = "renesas,rcar-gen2-sata",
@@ -864,7 +873,7 @@ static const struct of_device_id sata_rcar_match[] = {
 	},
 	{
 		.compatible = "renesas,rcar-gen3-sata",
-		.data = (void *)RCAR_GEN2_SATA
+		.data = (void *)RCAR_GEN3_SATA
 	},
 	{ },
 };
@@ -982,11 +991,18 @@ static int sata_rcar_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	/* ack and mask */
-	iowrite32(0, base + SATAINTSTAT_REG);
-	iowrite32(0x7ff, base + SATAINTMASK_REG);
-	/* enable interrupts */
-	iowrite32(ATAPI_INT_ENABLE_SATAINT, base + ATAPI_INT_ENABLE_REG);
+	if (priv->type == RCAR_GEN3_SATA) {
+		sata_rcar_gen2_phy_init(priv);
+		sata_rcar_init_module(priv);
+	} else {
+		/* ack and mask */
+		iowrite32(0, base + SATAINTSTAT_REG);
+		iowrite32(0x7ff, base + SATAINTMASK_REG);
+
+		/* enable interrupts */
+		iowrite32(ATAPI_INT_ENABLE_SATAINT,
+			  base + ATAPI_INT_ENABLE_REG);
+	}
 
 	ata_host_resume(host);
 

drivers/bluetooth/btusb.c

@@ -231,7 +231,6 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0930, 0x0227), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 },
-	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
 	{ USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 },
@@ -264,6 +263,7 @@ static const struct usb_device_id blacklist_table[] = {
 	{ USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 },
 
 	/* QCA ROME chipset */
+	{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe007), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe009), .driver_info = BTUSB_QCA_ROME },
 	{ USB_DEVICE(0x0cf3, 0xe010), .driver_info = BTUSB_QCA_ROME },
@@ -386,10 +386,10 @@ static const struct usb_device_id blacklist_table[] = {
  */
 static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 	{
-		/* Lenovo Yoga 920 (QCA Rome device 0cf3:e300) */
+		/* Dell OptiPlex 3060 (QCA ROME device 0cf3:e007) */
 		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920"),
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 3060"),
 		},
 	},
 	{}

drivers/bluetooth/hci_bcm.c

@@ -244,7 +244,9 @@ static irqreturn_t bcm_host_wake(int irq, void *data)
 
 	bt_dev_dbg(bdev, "Host wake IRQ");
 
-	pm_request_resume(bdev->dev);
+	pm_runtime_get(bdev->dev);
+	pm_runtime_mark_last_busy(bdev->dev);
+	pm_runtime_put_autosuspend(bdev->dev);
 
 	return IRQ_HANDLED;
 }
@@ -301,7 +303,7 @@ static const struct bcm_set_sleep_mode default_sleep_params = {
 	.usb_auto_sleep = 0,
 	.usb_resume_timeout = 0,
 	.break_to_host = 0,
-	.pulsed_host_wake = 0,
+	.pulsed_host_wake = 1,
 };
 
 static int bcm_setup_sleep(struct hci_uart *hu)
@@ -586,8 +588,11 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
 	} else if (!bcm->rx_skb) {
 		/* Delay auto-suspend when receiving completed packet */
 		mutex_lock(&bcm_device_lock);
-		if (bcm->dev && bcm_device_exists(bcm->dev))
-			pm_request_resume(bcm->dev->dev);
+		if (bcm->dev && bcm_device_exists(bcm->dev)) {
+			pm_runtime_get(bcm->dev->dev);
+			pm_runtime_mark_last_busy(bcm->dev->dev);
+			pm_runtime_put_autosuspend(bcm->dev->dev);
+		}
 		mutex_unlock(&bcm_device_lock);
 	}
 

drivers/clk/bcm/clk-bcm2835.c

@@ -449,17 +449,17 @@ struct bcm2835_pll_ana_bits {
 static const struct bcm2835_pll_ana_bits bcm2835_ana_default = {
 	.mask0 = 0,
 	.set0 = 0,
-	.mask1 = (u32)~(A2W_PLL_KI_MASK | A2W_PLL_KP_MASK),
+	.mask1 = A2W_PLL_KI_MASK | A2W_PLL_KP_MASK,
 	.set1 = (2 << A2W_PLL_KI_SHIFT) | (8 << A2W_PLL_KP_SHIFT),
-	.mask3 = (u32)~A2W_PLL_KA_MASK,
+	.mask3 = A2W_PLL_KA_MASK,
 	.set3 = (2 << A2W_PLL_KA_SHIFT),
 	.fb_prediv_mask = BIT(14),
 };
 
 static const struct bcm2835_pll_ana_bits bcm2835_ana_pllh = {
-	.mask0 = (u32)~(A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK),
+	.mask0 = A2W_PLLH_KA_MASK | A2W_PLLH_KI_LOW_MASK,
 	.set0 = (2 << A2W_PLLH_KA_SHIFT) | (2 << A2W_PLLH_KI_LOW_SHIFT),
-	.mask1 = (u32)~(A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK),
+	.mask1 = A2W_PLLH_KI_HIGH_MASK | A2W_PLLH_KP_MASK,
 	.set1 = (6 << A2W_PLLH_KP_SHIFT),
 	.mask3 = 0,
 	.set3 = 0,
@@ -623,8 +623,10 @@ static int bcm2835_pll_on(struct clk_hw *hw)
 		     ~A2W_PLL_CTRL_PWRDN);
 
 	/* Take the PLL out of reset. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, data->cm_ctrl_reg,
 		     cprman_read(cprman, data->cm_ctrl_reg) & ~CM_PLL_ANARST);
+	spin_unlock(&cprman->regs_lock);
 
 	/* Wait for the PLL to lock. */
 	timeout = ktime_add_ns(ktime_get(), LOCK_TIMEOUT_NS);
@@ -701,9 +703,11 @@ static int bcm2835_pll_set_rate(struct clk_hw *hw,
 	}
 
 	/* Unmask the reference clock from the oscillator. */
+	spin_lock(&cprman->regs_lock);
 	cprman_write(cprman, A2W_XOSC_CTRL,
 		     cprman_read(cprman, A2W_XOSC_CTRL) |
 		     data->reference_enable_mask);
+	spin_unlock(&cprman->regs_lock);
 
 	if (do_ana_setup_first)
 		bcm2835_pll_write_ana(cprman, data->ana_reg_base, ana);

drivers/clk/clk-aspeed.c

@@ -205,6 +205,18 @@ static const struct aspeed_clk_soc_data ast2400_data = {
 	.calc_pll = aspeed_ast2400_calc_pll,
 };
 
+static int aspeed_clk_is_enabled(struct clk_hw *hw)
+{
+	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
+	u32 clk = BIT(gate->clock_idx);
+	u32 enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;
+	u32 reg;
+
+	regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
+
+	return ((reg & clk) == enval) ? 1 : 0;
+}
+
 static int aspeed_clk_enable(struct clk_hw *hw)
 {
 	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
@@ -215,6 +227,11 @@ static int aspeed_clk_enable(struct clk_hw *hw)
 
 	spin_lock_irqsave(gate->lock, flags);
 
+	if (aspeed_clk_is_enabled(hw)) {
+		spin_unlock_irqrestore(gate->lock, flags);
+		return 0;
+	}
+
 	if (gate->reset_idx >= 0) {
 		/* Put IP in reset */
 		regmap_update_bits(gate->map, ASPEED_RESET_CTRL, rst, rst);
@@ -255,17 +272,6 @@ static void aspeed_clk_disable(struct clk_hw *hw)
 	spin_unlock_irqrestore(gate->lock, flags);
 }
 
-static int aspeed_clk_is_enabled(struct clk_hw *hw)
-{
-	struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
-	u32 clk = BIT(gate->clock_idx);
-	u32 reg;
-
-	regmap_read(gate->map, ASPEED_CLK_STOP_CTRL, &reg);
-
-	return (reg & clk) ? 0 : 1;
-}
-
 static const struct clk_ops aspeed_clk_gate_ops = {
 	.enable = aspeed_clk_enable,
 	.disable = aspeed_clk_disable,

drivers/clk/clk.c

@@ -1125,8 +1125,10 @@ static int clk_core_round_rate_nolock(struct clk_core *core,
 {
 	lockdep_assert_held(&prepare_lock);
 
-	if (!core)
+	if (!core) {
+		req->rate = 0;
 		return 0;
+	}
 
 	clk_core_init_rate_req(core, req);
 
@@ -2309,8 +2311,11 @@ static int clk_core_set_phase_nolock(struct clk_core *core, int degrees)
 
 	trace_clk_set_phase(core, degrees);
 
-	if (core->ops->set_phase)
+	if (core->ops->set_phase) {
 		ret = core->ops->set_phase(core->hw, degrees);
+		if (!ret)
+			core->phase = degrees;
+	}
 
 	trace_clk_set_phase_complete(core, degrees);
 
@@ -2967,23 +2972,38 @@ static int __clk_core_init(struct clk_core *core)
 		rate = 0;
 	core->rate = core->req_rate = rate;
 
+	/*
+	 * Enable CLK_IS_CRITICAL clocks so newly added critical clocks
+	 * don't get accidentally disabled when walking the orphan tree and
+	 * reparenting clocks
+	 */
+	if (core->flags & CLK_IS_CRITICAL) {
+		unsigned long flags;
+
+		clk_core_prepare(core);
+
+		flags = clk_enable_lock();
+		clk_core_enable(core);
+		clk_enable_unlock(flags);
+	}
+
 	/*
 	 * walk the list of orphan clocks and reparent any that newly finds a
 	 * parent.
 	 */
 	hlist_for_each_entry_safe(orphan, tmp2, &clk_orphan_list, child_node) {
 		struct clk_core *parent = __clk_init_parent(orphan);
-		unsigned long flags;
 
 		/*
-		 * we could call __clk_set_parent, but that would result in a
-		 * redundant call to the .set_rate op, if it exists
+		 * We need to use __clk_set_parent_before() and _after() to
+		 * to properly migrate any prepare/enable count of the orphan
+		 * clock. This is important for CLK_IS_CRITICAL clocks, which
+		 * are enabled during init but might not have a parent yet.
 		 */
 		if (parent) {
 			/* update the clk tree topology */
-			flags = clk_enable_lock();
-			clk_reparent(orphan, parent);
-			clk_enable_unlock(flags);
+			__clk_set_parent_before(orphan, parent);
+			__clk_set_parent_after(orphan, parent, NULL);
 			__clk_recalc_accuracies(orphan);
 			__clk_recalc_rates(orphan, 0);
 		}
@@ -3000,16 +3020,6 @@ static int __clk_core_init(struct clk_core *core)
 	if (core->ops->init)
 		core->ops->init(core->hw);
 
-	if (core->flags & CLK_IS_CRITICAL) {
-		unsigned long flags;
-
-		clk_core_prepare(core);
-
-		flags = clk_enable_lock();
-		clk_core_enable(core);
-		clk_enable_unlock(flags);
-	}
-
 	kref_init(&core->ref);
 out:
 	clk_pm_runtime_put(core);

drivers/clk/hisilicon/clk-hi3660-stub.c

@@ -149,6 +149,8 @@ static int hi3660_stub_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(stub_clk_chan.mbox);
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -EINVAL;
 	freq_reg = devm_ioremap(dev, res->start, resource_size(res));
 	if (!freq_reg)
 		return -ENOMEM;

drivers/clk/imx/clk-imx51-imx53.c

@@ -131,7 +131,17 @@ static const char *ieee1588_sels[] = { "pll3_sw", "pll4_sw", "dummy" /* usbphy2_
 static struct clk *clk[IMX5_CLK_END];
 static struct clk_onecell_data clk_data;
 
-static struct clk ** const uart_clks[] __initconst = {
+static struct clk ** const uart_clks_mx51[] __initconst = {
+	&clk[IMX5_CLK_UART1_IPG_GATE],
+	&clk[IMX5_CLK_UART1_PER_GATE],
+	&clk[IMX5_CLK_UART2_IPG_GATE],
+	&clk[IMX5_CLK_UART2_PER_GATE],
+	&clk[IMX5_CLK_UART3_IPG_GATE],
+	&clk[IMX5_CLK_UART3_PER_GATE],
+	NULL
+};
+
+static struct clk ** const uart_clks_mx50_mx53[] __initconst = {
 	&clk[IMX5_CLK_UART1_IPG_GATE],
 	&clk[IMX5_CLK_UART1_PER_GATE],
 	&clk[IMX5_CLK_UART2_IPG_GATE],
@@ -321,8 +331,6 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base)
 	clk_prepare_enable(clk[IMX5_CLK_TMAX1]);
 	clk_prepare_enable(clk[IMX5_CLK_TMAX2]); /* esdhc2, fec */
 	clk_prepare_enable(clk[IMX5_CLK_TMAX3]); /* esdhc1, esdhc4 */
-
-	imx_register_uart_clocks(uart_clks);
 }
 
 static void __init mx50_clocks_init(struct device_node *np)
@@ -388,6 +396,8 @@ static void __init mx50_clocks_init(struct device_node *np)
 
 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+
+	imx_register_uart_clocks(uart_clks_mx50_mx53);
 }
 CLK_OF_DECLARE(imx50_ccm, "fsl,imx50-ccm", mx50_clocks_init);
 
@@ -477,6 +487,8 @@ static void __init mx51_clocks_init(struct device_node *np)
 	val = readl(MXC_CCM_CLPCR);
 	val |= 1 << 23;
 	writel(val, MXC_CCM_CLPCR);
+
+	imx_register_uart_clocks(uart_clks_mx51);
 }
 CLK_OF_DECLARE(imx51_ccm, "fsl,imx51-ccm", mx51_clocks_init);
 
@@ -606,5 +618,7 @@ static void __init mx53_clocks_init(struct device_node *np)
 
 	r = clk_round_rate(clk[IMX5_CLK_USBOH3_PER_GATE], 54000000);
 	clk_set_rate(clk[IMX5_CLK_USBOH3_PER_GATE], r);
+
+	imx_register_uart_clocks(uart_clks_mx50_mx53);
 }
 CLK_OF_DECLARE(imx53_ccm, "fsl,imx53-ccm", mx53_clocks_init);

drivers/clk/qcom/apcs-msm8916.c

@@ -49,11 +49,10 @@ static int qcom_apcs_msm8916_clk_probe(struct platform_device *pdev)
 	struct clk_regmap_mux_div *a53cc;
 	struct regmap *regmap;
 	struct clk_init_data init = { };
-	int ret;
+	int ret = -ENODEV;
 
 	regmap = dev_get_regmap(parent, NULL);
-	if (IS_ERR(regmap)) {
-		ret = PTR_ERR(regmap);
+	if (!regmap) {
 		dev_err(dev, "failed to get regmap: %d\n", ret);
 		return ret;
 	}

drivers/clk/sunxi-ng/ccu-sun6i-a31.c

@@ -762,7 +762,7 @@ static struct ccu_mp out_a_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-a",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };
@@ -783,7 +783,7 @@ static struct ccu_mp out_b_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-b",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };
@@ -804,7 +804,7 @@ static struct ccu_mp out_c_clk = {
 		.features	= CCU_FEATURE_FIXED_PREDIV,
 		.hw.init	= CLK_HW_INIT_PARENTS("out-c",
 						      clk_out_parents,
-						      &ccu_div_ops,
+						      &ccu_mp_ops,
 						      0),
 	},
 };

drivers/clk/ti/clk-33xx.c

@@ -45,7 +45,7 @@ static const struct omap_clkctrl_bit_data am3_gpio4_bit_data[] __initconst = {
 
 static const struct omap_clkctrl_reg_data am3_l4_per_clkctrl_regs[] __initconst = {
 	{ AM3_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
-	{ AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP, "lcd_gclk", "lcdc_clkdm" },
+	{ AM3_LCDC_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "lcd_gclk", "lcdc_clkdm" },
 	{ AM3_USB_OTG_HS_CLKCTRL, NULL, CLKF_SW_SUP, "usbotg_fck", "l3s_clkdm" },
 	{ AM3_TPTC0_CLKCTRL, NULL, CLKF_SW_SUP, "l3_gclk", "l3_clkdm" },
 	{ AM3_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_div2_ck", "l3_clkdm" },

drivers/clk/ti/clk-43xx.c

@@ -187,7 +187,7 @@ static const struct omap_clkctrl_reg_data am4_l4_per_clkctrl_regs[] __initconst
 	{ AM4_OCP2SCP0_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
 	{ AM4_OCP2SCP1_CLKCTRL, NULL, CLKF_SW_SUP, "l4ls_gclk" },
 	{ AM4_EMIF_CLKCTRL, NULL, CLKF_SW_SUP, "dpll_ddr_m2_ck", "emif_clkdm" },
-	{ AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP, "disp_clk", "dss_clkdm" },
+	{ AM4_DSS_CORE_CLKCTRL, NULL, CLKF_SW_SUP | CLKF_SET_RATE_PARENT, "disp_clk", "dss_clkdm" },
 	{ AM4_CPGMAC0_CLKCTRL, NULL, CLKF_SW_SUP, "cpsw_125mhz_gclk", "cpsw_125mhz_clkdm" },
 	{ 0 },
 };

drivers/clk/ti/clkctrl.c

@@ -537,6 +537,8 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node)
 		init.parent_names = &reg_data->parent;
 		init.num_parents = 1;
 		init.flags = 0;
+		if (reg_data->flags & CLKF_SET_RATE_PARENT)
+			init.flags |= CLK_SET_RATE_PARENT;
 		init.name = kasprintf(GFP_KERNEL, "%s:%s:%04x:%d",
 				      node->parent->name, node->name,
 				      reg_data->offset, 0);

drivers/dma/stm32-dmamux.c

@@ -118,14 +118,15 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
 	spin_lock_irqsave(&dmamux->lock, flags);
 	mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
 					   dmamux->dma_requests);
-	set_bit(mux->chan_id, dmamux->dma_inuse);
-	spin_unlock_irqrestore(&dmamux->lock, flags);
 
 	if (mux->chan_id == dmamux->dma_requests) {
+		spin_unlock_irqrestore(&dmamux->lock, flags);
 		dev_err(&pdev->dev, "Run out of free DMA requests\n");
 		ret = -ENOMEM;
-		goto error;
+		goto error_chan_id;
 	}
+	set_bit(mux->chan_id, dmamux->dma_inuse);
+	spin_unlock_irqrestore(&dmamux->lock, flags);
 
 	/* Look for DMA Master */
 	for (i = 1, min = 0, max = dmamux->dma_reqs[i];
@@ -173,6 +174,8 @@ static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
 
 error:
 	clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+error_chan_id:
 	kfree(mux);
 	return ERR_PTR(ret);
 }

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -2063,9 +2063,12 @@ void amdgpu_device_fini(struct amdgpu_device *adev)
 
 	DRM_INFO("amdgpu: finishing device.\n");
 	adev->shutdown = true;
-	if (adev->mode_info.mode_config_initialized)
-		drm_crtc_force_disable_all(adev->ddev);
-
+	if (adev->mode_info.mode_config_initialized){
+		if (!amdgpu_device_has_dc_support(adev))
+			drm_crtc_force_disable_all(adev->ddev);
+		else
+			drm_atomic_helper_shutdown(adev->ddev);
+	}
 	amdgpu_ib_pool_fini(adev);
 	amdgpu_fence_driver_fini(adev);
 	amdgpu_fbdev_fini(adev);

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -3134,8 +3134,6 @@ static int amdgpu_dm_plane_init(struct amdgpu_display_manager *dm,
 
 	switch (aplane->base.type) {
 	case DRM_PLANE_TYPE_PRIMARY:
-		aplane->base.format_default = true;
-
 		res = drm_universal_plane_init(
 				dm->adev->ddev,
 				&aplane->base,
@@ -4794,6 +4792,9 @@ static int dm_atomic_check_plane_state_fb(struct drm_atomic_state *state,
 			return -EDEADLK;
 
 		crtc_state = drm_atomic_get_crtc_state(plane_state->state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+
 		if (crtc->primary == plane && crtc_state->active) {
 			if (!plane_state->fb)
 				return -EINVAL;

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_helpers.c

@@ -109,7 +109,7 @@ enum dc_edid_status dm_helpers_parse_edid_caps(
 		struct cea_sad *sad = &sads[i];
 
 		edid_caps->audio_modes[i].format_code = sad->format;
-		edid_caps->audio_modes[i].channel_count = sad->channels;
+		edid_caps->audio_modes[i].channel_count = sad->channels + 1;
 		edid_caps->audio_modes[i].sample_rate = sad->freq;
 		edid_caps->audio_modes[i].sample_size = sad->byte2;
 	}

drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.h

@@ -496,6 +496,9 @@ struct dce_hwseq_registers {
 	HWS_SF(, DOMAIN7_PG_STATUS, DOMAIN7_PGFSM_PWR_STATUS, mask_sh), \
 	HWS_SF(, DC_IP_REQUEST_CNTL, IP_REQUEST_EN, mask_sh), \
 	HWS_SF(, D1VGA_CONTROL, D1VGA_MODE_ENABLE, mask_sh),\
+	HWS_SF(, D2VGA_CONTROL, D2VGA_MODE_ENABLE, mask_sh),\
+	HWS_SF(, D3VGA_CONTROL, D3VGA_MODE_ENABLE, mask_sh),\
+	HWS_SF(, D4VGA_CONTROL, D4VGA_MODE_ENABLE, mask_sh),\
 	HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_ENABLE, mask_sh),\
 	HWS_SF(, VGA_TEST_CONTROL, VGA_TEST_RENDER_START, mask_sh),\
 	HWS_SF(, LVTMA_PWRSEQ_CNTL, LVTMA_BLON, mask_sh), \
@@ -591,7 +594,10 @@ struct dce_hwseq_registers {
 	type DENTIST_DISPCLK_WDIVIDER; \
 	type VGA_TEST_ENABLE; \
 	type VGA_TEST_RENDER_START; \
-	type D1VGA_MODE_ENABLE;
+	type D1VGA_MODE_ENABLE; \
+	type D2VGA_MODE_ENABLE; \
+	type D3VGA_MODE_ENABLE; \
+	type D4VGA_MODE_ENABLE;
 
 struct dce_hwseq_shift {
 	HWSEQ_REG_FIELD_LIST(uint8_t)

drivers/gpu/drm/amd/display/dc/dce/dce_opp.c

@@ -128,23 +128,22 @@ static void set_truncation(
 		return;
 	}
 	/* on other format-to do */
-	if (params->flags.TRUNCATE_ENABLED == 0 ||
-			params->flags.TRUNCATE_DEPTH == 2)
+	if (params->flags.TRUNCATE_ENABLED == 0)
 		return;
 	/*Set truncation depth and Enable truncation*/
 	REG_UPDATE_3(FMT_BIT_DEPTH_CONTROL,
 				FMT_TRUNCATE_EN, 1,
 				FMT_TRUNCATE_DEPTH,
-				params->flags.TRUNCATE_MODE,
+				params->flags.TRUNCATE_DEPTH,
 				FMT_TRUNCATE_MODE,
-				params->flags.TRUNCATE_DEPTH);
+				params->flags.TRUNCATE_MODE);
 }
 
 
 /**
  *	set_spatial_dither
  *	1) set spatial dithering mode: pattern of seed
- *	2) set spatical dithering depth: 0 for 18bpp or 1 for 24bpp
+ *	2) set spatial dithering depth: 0 for 18bpp or 1 for 24bpp
  *	3) set random seed
  *	4) set random mode
  *		lfsr is reset every frame or not reset

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -238,14 +238,24 @@ static void enable_power_gating_plane(
 static void disable_vga(
 	struct dce_hwseq *hws)
 {
-	unsigned int in_vga_mode = 0;
-
-	REG_GET(D1VGA_CONTROL, D1VGA_MODE_ENABLE, &in_vga_mode);
-
-	if (in_vga_mode == 0)
+	unsigned int in_vga1_mode = 0;
+	unsigned int in_vga2_mode = 0;
+	unsigned int in_vga3_mode = 0;
+	unsigned int in_vga4_mode = 0;
+
+	REG_GET(D1VGA_CONTROL, D1VGA_MODE_ENABLE, &in_vga1_mode);
+	REG_GET(D2VGA_CONTROL, D2VGA_MODE_ENABLE, &in_vga2_mode);
+	REG_GET(D3VGA_CONTROL, D3VGA_MODE_ENABLE, &in_vga3_mode);
+	REG_GET(D4VGA_CONTROL, D4VGA_MODE_ENABLE, &in_vga4_mode);
+
+	if (in_vga1_mode == 0 && in_vga2_mode == 0 &&
+			in_vga3_mode == 0 && in_vga4_mode == 0)
 		return;
 
 	REG_WRITE(D1VGA_CONTROL, 0);
+	REG_WRITE(D2VGA_CONTROL, 0);
+	REG_WRITE(D3VGA_CONTROL, 0);
+	REG_WRITE(D4VGA_CONTROL, 0);
 
 	/* HW Engineer's Notes:
 	 *  During switch from vga->extended, if we set the VGA_TEST_ENABLE and

drivers/gpu/drm/ast/ast_tables.h

@@ -97,7 +97,7 @@ static const struct ast_vbios_dclk_info dclk_table[] = {
 	{0x67, 0x22, 0x00},			/* 0E: VCLK157_5	*/
 	{0x6A, 0x22, 0x00},			/* 0F: VCLK162		*/
 	{0x4d, 0x4c, 0x80},			/* 10: VCLK154		*/
-	{0xa7, 0x78, 0x80},			/* 11: VCLK83.5		*/
+	{0x68, 0x6f, 0x80},			/* 11: VCLK83.5		*/
 	{0x28, 0x49, 0x80},			/* 12: VCLK106.5	*/
 	{0x37, 0x49, 0x80},			/* 13: VCLK146.25	*/
 	{0x1f, 0x45, 0x80},			/* 14: VCLK148.5	*/
@@ -127,7 +127,7 @@ static const struct ast_vbios_dclk_info dclk_table_ast2500[] = {
 	{0x67, 0x22, 0x00},			/* 0E: VCLK157_5	*/
 	{0x6A, 0x22, 0x00},			/* 0F: VCLK162		*/
 	{0x4d, 0x4c, 0x80},			/* 10: VCLK154		*/
-	{0xa7, 0x78, 0x80},			/* 11: VCLK83.5		*/
+	{0x68, 0x6f, 0x80},			/* 11: VCLK83.5		*/
 	{0x28, 0x49, 0x80},			/* 12: VCLK106.5	*/
 	{0x37, 0x49, 0x80},			/* 13: VCLK146.25	*/
 	{0x1f, 0x45, 0x80},			/* 14: VCLK148.5	*/

drivers/gpu/drm/drm_framebuffer.c

@@ -461,6 +461,12 @@ int drm_mode_getfb(struct drm_device *dev,
 	if (!fb)
 		return -ENOENT;
 
+	/* Multi-planar framebuffers need getfb2. */
+	if (fb->format->num_planes > 1) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	r->height = fb->height;
 	r->width = fb->width;
 	r->depth = fb->format->depth;
@@ -484,6 +490,7 @@ int drm_mode_getfb(struct drm_device *dev,
 		ret = -ENODEV;
 	}
 
+out:
 	drm_framebuffer_put(fb);
 
 	return ret;

drivers/gpu/drm/i915/intel_ddi.c

@@ -2175,8 +2175,7 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
 		intel_prepare_dp_ddi_buffers(encoder, crtc_state);
 
 	intel_ddi_init_dp_buf_reg(encoder);
-	if (!is_mst)
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
+	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 	intel_dp_start_link_train(intel_dp);
 	if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
 		intel_dp_stop_link_train(intel_dp);
@@ -2274,14 +2273,12 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 	struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
 	struct intel_dp *intel_dp = &dig_port->dp;
-	bool is_mst = intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST);
 
 	/*
 	 * Power down sink before disabling the port, otherwise we end
 	 * up getting interrupts from the sink on detecting link loss.
 	 */
-	if (!is_mst)
-		intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
+	intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
 
 	intel_disable_ddi_buf(encoder);
 

drivers/gpu/drm/i915/intel_hangcheck.c

@@ -246,7 +246,7 @@ engine_stuck(struct intel_engine_cs *engine, u64 acthd)
 	 */
 	tmp = I915_READ_CTL(engine);
 	if (tmp & RING_WAIT) {
-		i915_handle_error(dev_priv, 0,
+		i915_handle_error(dev_priv, BIT(engine->id),
 				  "Kicking stuck wait on %s",
 				  engine->name);
 		I915_WRITE_CTL(engine, tmp);
@@ -258,7 +258,7 @@ engine_stuck(struct intel_engine_cs *engine, u64 acthd)
 		default:
 			return ENGINE_DEAD;
 		case 1:
-			i915_handle_error(dev_priv, 0,
+			i915_handle_error(dev_priv, ALL_ENGINES,
 					  "Kicking stuck semaphore on %s",
 					  engine->name);
 			I915_WRITE_CTL(engine, tmp);

drivers/gpu/drm/imx/ipuv3-crtc.c

@@ -225,7 +225,11 @@ static void ipu_crtc_atomic_begin(struct drm_crtc *crtc,
 				  struct drm_crtc_state *old_crtc_state)
 {
 	drm_crtc_vblank_on(crtc);
+}
 
+static void ipu_crtc_atomic_flush(struct drm_crtc *crtc,
+				  struct drm_crtc_state *old_crtc_state)
+{
 	spin_lock_irq(&crtc->dev->event_lock);
 	if (crtc->state->event) {
 		WARN_ON(drm_crtc_vblank_get(crtc));
@@ -293,6 +297,7 @@ static const struct drm_crtc_helper_funcs ipu_helper_funcs = {
 	.mode_set_nofb = ipu_crtc_mode_set_nofb,
 	.atomic_check = ipu_crtc_atomic_check,
 	.atomic_begin = ipu_crtc_atomic_begin,
+	.atomic_flush = ipu_crtc_atomic_flush,
 	.atomic_disable = ipu_crtc_atomic_disable,
 	.atomic_enable = ipu_crtc_atomic_enable,
 };

drivers/gpu/drm/imx/ipuv3-plane.c

@@ -22,6 +22,7 @@
 #include <drm/drm_plane_helper.h>
 
 #include "video/imx-ipu-v3.h"
+#include "imx-drm.h"
 #include "ipuv3-plane.h"
 
 struct ipu_plane_state {
@@ -272,7 +273,7 @@ static void ipu_plane_destroy(struct drm_plane *plane)
 	kfree(ipu_plane);
 }
 
-void ipu_plane_state_reset(struct drm_plane *plane)
+static void ipu_plane_state_reset(struct drm_plane *plane)
 {
 	struct ipu_plane_state *ipu_state;
 
@@ -292,7 +293,8 @@ void ipu_plane_state_reset(struct drm_plane *plane)
 	plane->state = &ipu_state->base;
 }
 
-struct drm_plane_state *ipu_plane_duplicate_state(struct drm_plane *plane)
+static struct drm_plane_state *
+ipu_plane_duplicate_state(struct drm_plane *plane)
 {
 	struct ipu_plane_state *state;
 
@@ -306,8 +308,8 @@ struct drm_plane_state *ipu_plane_duplicate_state(struct drm_plane *plane)
 	return &state->base;
 }
 
-void ipu_plane_destroy_state(struct drm_plane *plane,
-			     struct drm_plane_state *state)
+static void ipu_plane_destroy_state(struct drm_plane *plane,
+				    struct drm_plane_state *state)
 {
 	struct ipu_plane_state *ipu_state = to_ipu_plane_state(state);
 

drivers/gpu/drm/radeon/radeon_connectors.c

@@ -90,25 +90,18 @@ void radeon_connector_hotplug(struct drm_connector *connector)
 		/* don't do anything if sink is not display port, i.e.,
 		 * passive dp->(dvi|hdmi) adaptor
 		 */
-		if (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT) {
-			int saved_dpms = connector->dpms;
-			/* Only turn off the display if it's physically disconnected */
-			if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd)) {
-				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
-			} else if (radeon_dp_needs_link_train(radeon_connector)) {
-				/* Don't try to start link training before we
-				 * have the dpcd */
-				if (!radeon_dp_getdpcd(radeon_connector))
-					return;
-
-				/* set it to OFF so that drm_helper_connector_dpms()
-				 * won't return immediately since the current state
-				 * is ON at this point.
-				 */
-				connector->dpms = DRM_MODE_DPMS_OFF;
-				drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
-			}
-			connector->dpms = saved_dpms;
+		if (dig_connector->dp_sink_type == CONNECTOR_OBJECT_ID_DISPLAYPORT &&
+		    radeon_hpd_sense(rdev, radeon_connector->hpd.hpd) &&
+		    radeon_dp_needs_link_train(radeon_connector)) {
+			/* Don't start link training before we have the DPCD */
+			if (!radeon_dp_getdpcd(radeon_connector))
+				return;
+
+			/* Turn the connector off and back on immediately, which
+			 * will trigger link training
+			 */
+			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
 		}
 	}
 }

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -111,7 +111,7 @@ static int sun4i_drv_bind(struct device *dev)
 	/* drm_vblank_init calls kcalloc, which can fail */
 	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
 	if (ret)
-		goto free_mem_region;
+		goto cleanup_mode_config;
 
 	drm->irq_enabled = true;
 
@@ -139,7 +139,6 @@ finish_poll:
 	sun4i_framebuffer_free(drm);
 cleanup_mode_config:
 	drm_mode_config_cleanup(drm);
-free_mem_region:
 	of_reserved_mem_device_release(dev);
 free_drm:
 	drm_dev_unref(drm);

drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c

@@ -538,7 +538,8 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 					     &sun4i_hdmi_regmap_config);
 	if (IS_ERR(hdmi->regmap)) {
 		dev_err(dev, "Couldn't create HDMI encoder regmap\n");
-		return PTR_ERR(hdmi->regmap);
+		ret = PTR_ERR(hdmi->regmap);
+		goto err_disable_mod_clk;
 	}
 
 	ret = sun4i_tmds_create(hdmi);
@@ -551,7 +552,8 @@ static int sun4i_hdmi_bind(struct device *dev, struct device *master,
 		hdmi->ddc_parent_clk = devm_clk_get(dev, "ddc");
 		if (IS_ERR(hdmi->ddc_parent_clk)) {
 			dev_err(dev, "Couldn't get the HDMI DDC clock\n");
-			return PTR_ERR(hdmi->ddc_parent_clk);
+			ret = PTR_ERR(hdmi->ddc_parent_clk);
+			goto err_disable_mod_clk;
 		}
 	} else {
 		hdmi->ddc_parent_clk = hdmi->tmds_clk;

drivers/gpu/drm/sun4i/sun4i_tcon.c

@@ -103,6 +103,7 @@ static void sun4i_tcon_channel_set_status(struct sun4i_tcon *tcon, int channel,
 
 	if (enabled) {
 		clk_prepare_enable(clk);
+		clk_rate_exclusive_get(clk);
 	} else {
 		clk_rate_exclusive_put(clk);
 		clk_disable_unprepare(clk);
@@ -262,7 +263,7 @@ static void sun4i_tcon0_mode_set_common(struct sun4i_tcon *tcon,
 					const struct drm_display_mode *mode)
 {
 	/* Configure the dot clock */
-	clk_set_rate_exclusive(tcon->dclk, mode->crtc_clock * 1000);
+	clk_set_rate(tcon->dclk, mode->crtc_clock * 1000);
 
 	/* Set the resolution */
 	regmap_write(tcon->regs, SUN4I_TCON0_BASIC0_REG,
@@ -423,7 +424,7 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
 	WARN_ON(!tcon->quirks->has_channel_1);
 
 	/* Configure the dot clock */
-	clk_set_rate_exclusive(tcon->sclk1, mode->crtc_clock * 1000);
+	clk_set_rate(tcon->sclk1, mode->crtc_clock * 1000);
 
 	/* Adjust clock delay */
 	clk_delay = sun4i_tcon_get_clk_delay(mode, 1);

drivers/gpu/drm/tegra/dc.c

@@ -1903,8 +1903,12 @@ cleanup:
 	if (!IS_ERR(primary))
 		drm_plane_cleanup(primary);
 
-	if (group && tegra->domain) {
-		iommu_detach_group(tegra->domain, group);
+	if (group && dc->domain) {
+		if (group == tegra->group) {
+			iommu_detach_group(dc->domain, group);
+			tegra->group = NULL;
+		}
+
 		dc->domain = NULL;
 	}
 
@@ -1913,8 +1917,10 @@ cleanup:
 
 static int tegra_dc_exit(struct host1x_client *client)
 {
+	struct drm_device *drm = dev_get_drvdata(client->parent);
 	struct iommu_group *group = iommu_group_get(client->dev);
 	struct tegra_dc *dc = host1x_client_to_dc(client);
+	struct tegra_drm *tegra = drm->dev_private;
 	int err;
 
 	devm_free_irq(dc->dev, dc->irq, dc);
@@ -1926,7 +1932,11 @@ static int tegra_dc_exit(struct host1x_client *client)
 	}
 
 	if (group && dc->domain) {
-		iommu_detach_group(dc->domain, group);
+		if (group == tegra->group) {
+			iommu_detach_group(dc->domain, group);
+			tegra->group = NULL;
+		}
+
 		dc->domain = NULL;
 	}
 

drivers/gpu/drm/tegra/drm.c

@@ -250,6 +250,7 @@ static void tegra_drm_unload(struct drm_device *drm)
 
 	drm_kms_helper_poll_fini(drm);
 	tegra_drm_fb_exit(drm);
+	drm_atomic_helper_shutdown(drm);
 	drm_mode_config_cleanup(drm);
 
 	err = host1x_device_exit(device);

drivers/gpu/drm/tegra/dsi.c

@@ -1072,7 +1072,6 @@ static int tegra_dsi_exit(struct host1x_client *client)
 	struct tegra_dsi *dsi = host1x_client_to_dsi(client);
 
 	tegra_output_exit(&dsi->output);
-	regulator_disable(dsi->vdd);
 
 	return 0;
 }

drivers/gpu/drm/tegra/plane.c

@@ -297,6 +297,10 @@ int tegra_plane_format_get_alpha(unsigned int opaque, unsigned int *alpha)
 	case WIN_COLOR_DEPTH_B8G8R8X8:
 		*alpha = WIN_COLOR_DEPTH_B8G8R8A8;
 		return 0;
+
+	case WIN_COLOR_DEPTH_B5G6R5:
+		*alpha = opaque;
+		return 0;
 	}
 
 	return -EINVAL;
@@ -330,9 +334,6 @@ void tegra_plane_check_dependent(struct tegra_plane *tegra,
 	unsigned int zpos[2];
 	unsigned int i;
 
-	for (i = 0; i < 3; i++)
-		state->dependent[i] = false;
-
 	for (i = 0; i < 2; i++)
 		zpos[i] = 0;
 
@@ -346,6 +347,8 @@ void tegra_plane_check_dependent(struct tegra_plane *tegra,
 
 		index = tegra_plane_get_overlap_index(tegra, p);
 
+		state->dependent[index] = false;
+
 		/*
 		 * If any of the other planes is on top of this plane and uses
 		 * a format with an alpha component, mark this plane as being

drivers/gpu/drm/udl/udl_fb.c

@@ -159,10 +159,15 @@ static int udl_fb_mmap(struct fb_info *info, struct vm_area_struct *vma)
 {
 	unsigned long start = vma->vm_start;
 	unsigned long size = vma->vm_end - vma->vm_start;
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	unsigned long offset;
 	unsigned long page, pos;
 
-	if (offset + size > info->fix.smem_len)
+	if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT))
+		return -EINVAL;
+
+	offset = vma->vm_pgoff << PAGE_SHIFT;
+
+	if (offset > info->fix.smem_len || size > info->fix.smem_len - offset)
 		return -EINVAL;
 
 	pos = (unsigned long)info->fix.smem_start + offset;

drivers/gpu/drm/vmwgfx/vmwgfx_drv.c

@@ -1337,6 +1337,19 @@ static void __vmw_svga_disable(struct vmw_private *dev_priv)
  */
 void vmw_svga_disable(struct vmw_private *dev_priv)
 {
+	/*
+	 * Disabling SVGA will turn off device modesetting capabilities, so
+	 * notify KMS about that so that it doesn't cache atomic state that
+	 * isn't valid anymore, for example crtcs turned on.
+	 * Strictly we'd want to do this under the SVGA lock (or an SVGA mutex),
+	 * but vmw_kms_lost_device() takes the reservation sem and thus we'll
+	 * end up with lock order reversal. Thus, a master may actually perform
+	 * a new modeset just after we call vmw_kms_lost_device() and race with
+	 * vmw_svga_disable(), but that should at worst cause atomic KMS state
+	 * to be inconsistent with the device, causing modesetting problems.
+	 *
+	 */
+	vmw_kms_lost_device(dev_priv->dev);
 	ttm_write_lock(&dev_priv->reservation_sem, false);
 	spin_lock(&dev_priv->svga_lock);
 	if (dev_priv->bdev.man[TTM_PL_VRAM].use_type) {

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -938,6 +938,7 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data,
 				struct drm_file *file_priv);
 void vmw_kms_legacy_hotspot_clear(struct vmw_private *dev_priv);
+void vmw_kms_lost_device(struct drm_device *dev);
 
 int vmw_dumb_create(struct drm_file *file_priv,
 		    struct drm_device *dev,

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -31,7 +31,6 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_rect.h>
 
-
 /* Might need a hrtimer here? */
 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
 
@@ -2517,9 +2516,12 @@ void vmw_kms_helper_buffer_finish(struct vmw_private *dev_priv,
  * Helper to be used if an error forces the caller to undo the actions of
  * vmw_kms_helper_resource_prepare.
  */
-void vmw_kms_helper_resource_revert(struct vmw_resource *res)
+void vmw_kms_helper_resource_revert(struct vmw_validation_ctx *ctx)
 {
-	vmw_kms_helper_buffer_revert(res->backup);
+	struct vmw_resource *res = ctx->res;
+
+	vmw_kms_helper_buffer_revert(ctx->buf);
+	vmw_dmabuf_unreference(&ctx->buf);
 	vmw_resource_unreserve(res, false, NULL, 0);
 	mutex_unlock(&res->dev_priv->cmdbuf_mutex);
 }
@@ -2536,10 +2538,14 @@ void vmw_kms_helper_resource_revert(struct vmw_resource *res)
  * interrupted by a signal.
  */
 int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
-				    bool interruptible)
+				    bool interruptible,
+				    struct vmw_validation_ctx *ctx)
 {
 	int ret = 0;
 
+	ctx->buf = NULL;
+	ctx->res = res;
+
 	if (interruptible)
 		ret = mutex_lock_interruptible(&res->dev_priv->cmdbuf_mutex);
 	else
@@ -2558,6 +2564,8 @@ int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
 						    res->dev_priv->has_mob);
 		if (ret)
 			goto out_unreserve;
+
+		ctx->buf = vmw_dmabuf_reference(res->backup);
 	}
 	ret = vmw_resource_validate(res);
 	if (ret)
@@ -2565,7 +2573,7 @@ int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
 	return 0;
 
 out_revert:
-	vmw_kms_helper_buffer_revert(res->backup);
+	vmw_kms_helper_buffer_revert(ctx->buf);
 out_unreserve:
 	vmw_resource_unreserve(res, false, NULL, 0);
 out_unlock:
@@ -2581,11 +2589,13 @@ out_unlock:
  * @out_fence: Optional pointer to a fence pointer. If non-NULL, a
  * ref-counted fence pointer is returned here.
  */
-void vmw_kms_helper_resource_finish(struct vmw_resource *res,
-			     struct vmw_fence_obj **out_fence)
+void vmw_kms_helper_resource_finish(struct vmw_validation_ctx *ctx,
+				    struct vmw_fence_obj **out_fence)
 {
-	if (res->backup || out_fence)
-		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, res->backup,
+	struct vmw_resource *res = ctx->res;
+
+	if (ctx->buf || out_fence)
+		vmw_kms_helper_buffer_finish(res->dev_priv, NULL, ctx->buf,
 					     out_fence, NULL);
 
 	vmw_resource_unreserve(res, false, NULL, 0);
@@ -2851,3 +2861,14 @@ int vmw_kms_set_config(struct drm_mode_set *set,
 
 	return drm_atomic_helper_set_config(set, ctx);
 }
+
+
+/**
+ * vmw_kms_lost_device - Notify kms that modesetting capabilities will be lost
+ *
+ * @dev: Pointer to the drm device
+ */
+void vmw_kms_lost_device(struct drm_device *dev)
+{
+	drm_atomic_helper_shutdown(dev);
+}

drivers/gpu/drm/vmwgfx/vmwgfx_kms.h

@@ -240,6 +240,11 @@ struct vmw_display_unit {
 	int set_gui_y;
 };
 
+struct vmw_validation_ctx {
+	struct vmw_resource *res;
+	struct vmw_dma_buffer *buf;
+};
+
 #define vmw_crtc_to_du(x) \
 	container_of(x, struct vmw_display_unit, crtc)
 #define vmw_connector_to_du(x) \
@@ -296,9 +301,10 @@ void vmw_kms_helper_buffer_finish(struct vmw_private *dev_priv,
 				  struct drm_vmw_fence_rep __user *
 				  user_fence_rep);
 int vmw_kms_helper_resource_prepare(struct vmw_resource *res,
-				    bool interruptible);
-void vmw_kms_helper_resource_revert(struct vmw_resource *res);
-void vmw_kms_helper_resource_finish(struct vmw_resource *res,
+				    bool interruptible,
+				    struct vmw_validation_ctx *ctx);
+void vmw_kms_helper_resource_revert(struct vmw_validation_ctx *ctx);
+void vmw_kms_helper_resource_finish(struct vmw_validation_ctx *ctx,
 				    struct vmw_fence_obj **out_fence);
 int vmw_kms_readback(struct vmw_private *dev_priv,
 		     struct drm_file *file_priv,
@@ -439,5 +445,4 @@ int vmw_kms_stdu_dma(struct vmw_private *dev_priv,
 
 int vmw_kms_set_config(struct drm_mode_set *set,
 		       struct drm_modeset_acquire_ctx *ctx);
-
 #endif

drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c

@@ -909,12 +909,13 @@ int vmw_kms_sou_do_surface_dirty(struct vmw_private *dev_priv,
 	struct vmw_framebuffer_surface *vfbs =
 		container_of(framebuffer, typeof(*vfbs), base);
 	struct vmw_kms_sou_surface_dirty sdirty;
+	struct vmw_validation_ctx ctx;
 	int ret;
 
 	if (!srf)
 		srf = &vfbs->surface->res;
 
-	ret = vmw_kms_helper_resource_prepare(srf, true);
+	ret = vmw_kms_helper_resource_prepare(srf, true, &ctx);
 	if (ret)
 		return ret;
 
@@ -933,7 +934,7 @@ int vmw_kms_sou_do_surface_dirty(struct vmw_private *dev_priv,
 	ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips,
 				   dest_x, dest_y, num_clips, inc,
 				   &sdirty.base);
-	vmw_kms_helper_resource_finish(srf, out_fence);
+	vmw_kms_helper_resource_finish(&ctx, out_fence);
 
 	return ret;
 }

drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c

@@ -980,12 +980,13 @@ int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv,
 	struct vmw_framebuffer_surface *vfbs =
 		container_of(framebuffer, typeof(*vfbs), base);
 	struct vmw_stdu_dirty sdirty;
+	struct vmw_validation_ctx ctx;
 	int ret;
 
 	if (!srf)
 		srf = &vfbs->surface->res;
 
-	ret = vmw_kms_helper_resource_prepare(srf, true);
+	ret = vmw_kms_helper_resource_prepare(srf, true, &ctx);
 	if (ret)
 		return ret;
 
@@ -1008,7 +1009,7 @@ int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv,
 				   dest_x, dest_y, num_clips, inc,
 				   &sdirty.base);
 out_finish:
-	vmw_kms_helper_resource_finish(srf, out_fence);
+	vmw_kms_helper_resource_finish(&ctx, out_fence);
 
 	return ret;
 }

drivers/gpu/ipu-v3/ipu-prg.c

@@ -250,10 +250,14 @@ void ipu_prg_channel_disable(struct ipuv3_channel *ipu_chan)
 {
 	int prg_chan = ipu_prg_ipu_to_prg_chan(ipu_chan->num);
 	struct ipu_prg *prg = ipu_chan->ipu->prg_priv;
-	struct ipu_prg_channel *chan = &prg->chan[prg_chan];
+	struct ipu_prg_channel *chan;
 	u32 val;
 
-	if (!chan->enabled || prg_chan < 0)
+	if (prg_chan < 0)
+		return;
+
+	chan = &prg->chan[prg_chan];
+	if (!chan->enabled)
 		return;
 
 	pm_runtime_get_sync(prg->dev);
@@ -280,13 +284,15 @@ int ipu_prg_channel_configure(struct ipuv3_channel *ipu_chan,
 {
 	int prg_chan = ipu_prg_ipu_to_prg_chan(ipu_chan->num);
 	struct ipu_prg *prg = ipu_chan->ipu->prg_priv;
-	struct ipu_prg_channel *chan = &prg->chan[prg_chan];
+	struct ipu_prg_channel *chan;
 	u32 val;
 	int ret;
 
 	if (prg_chan < 0)
 		return prg_chan;
 
+	chan = &prg->chan[prg_chan];
+
 	if (chan->enabled) {
 		ipu_pre_update(prg->pres[chan->used_pre], *eba);
 		return 0;

drivers/hv/ring_buffer.c

@@ -417,13 +417,24 @@ __hv_pkt_iter_next(struct vmbus_channel *channel,
 }
 EXPORT_SYMBOL_GPL(__hv_pkt_iter_next);
 
+/* How many bytes were read in this iterator cycle */
+static u32 hv_pkt_iter_bytes_read(const struct hv_ring_buffer_info *rbi,
+					u32 start_read_index)
+{
+	if (rbi->priv_read_index >= start_read_index)
+		return rbi->priv_read_index - start_read_index;
+	else
+		return rbi->ring_datasize - start_read_index +
+			rbi->priv_read_index;
+}
+
 /*
  * Update host ring buffer after iterating over packets.
  */
 void hv_pkt_iter_close(struct vmbus_channel *channel)
 {
 	struct hv_ring_buffer_info *rbi = &channel->inbound;
-	u32 orig_write_sz = hv_get_bytes_to_write(rbi);
+	u32 curr_write_sz, pending_sz, bytes_read, start_read_index;
 
 	/*
 	 * Make sure all reads are done before we update the read index since
@@ -431,8 +442,12 @@ void hv_pkt_iter_close(struct vmbus_channel *channel)
 	 * is updated.
 	 */
 	virt_rmb();
+	start_read_index = rbi->ring_buffer->read_index;
 	rbi->ring_buffer->read_index = rbi->priv_read_index;
 
+	if (!rbi->ring_buffer->feature_bits.feat_pending_send_sz)
+		return;
+
 	/*
 	 * Issue a full memory barrier before making the signaling decision.
 	 * Here is the reason for having this barrier:
@@ -446,26 +461,29 @@ void hv_pkt_iter_close(struct vmbus_channel *channel)
 	 */
 	virt_mb();
 
-	/* If host has disabled notifications then skip */
-	if (rbi->ring_buffer->interrupt_mask)
+	pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
+	if (!pending_sz)
 		return;
 
-	if (rbi->ring_buffer->feature_bits.feat_pending_send_sz) {
-		u32 pending_sz = READ_ONCE(rbi->ring_buffer->pending_send_sz);
+	/*
+	 * Ensure the read of write_index in hv_get_bytes_to_write()
+	 * happens after the read of pending_send_sz.
+	 */
+	virt_rmb();
+	curr_write_sz = hv_get_bytes_to_write(rbi);
+	bytes_read = hv_pkt_iter_bytes_read(rbi, start_read_index);
 
-		/*
-		 * If there was space before we began iteration,
-		 * then host was not blocked. Also handles case where
-		 * pending_sz is zero then host has nothing pending
-		 * and does not need to be signaled.
-		 */
-		if (orig_write_sz > pending_sz)
-			return;
+	/*
+	 * If there was space before we began iteration,
+	 * then host was not blocked.
+	 */
 
-		/* If pending write will not fit, don't give false hope. */
-		if (hv_get_bytes_to_write(rbi) < pending_sz)
-			return;
-	}
+	if (curr_write_sz - bytes_read > pending_sz)
+		return;
+
+	/* If pending write will not fit, don't give false hope. */
+	if (curr_write_sz <= pending_sz)
+		return;
 
 	vmbus_setevent(channel);
 }

drivers/iio/accel/st_accel_core.c

@@ -920,6 +920,8 @@ static const struct iio_trigger_ops st_accel_trigger_ops = {
 int st_accel_common_probe(struct iio_dev *indio_dev)
 {
 	struct st_sensor_data *adata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata =
+		(struct st_sensors_platform_data *)adata->dev->platform_data;
 	int irq = adata->get_irq_data_ready(indio_dev);
 	int err;
 
@@ -946,7 +948,10 @@ int st_accel_common_probe(struct iio_dev *indio_dev)
 					&adata->sensor_settings->fs.fs_avl[0];
 	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
-	err = st_sensors_init_sensor(indio_dev, adata->dev->platform_data);
+	if (!pdata)
+		pdata = (struct st_sensors_platform_data *)&default_accel_pdata;
+
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_accel_power_off;
 

drivers/iio/adc/meson_saradc.c

@@ -462,8 +462,10 @@ static int meson_sar_adc_lock(struct iio_dev *indio_dev)
 			regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
 		} while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
 
-		if (timeout < 0)
+		if (timeout < 0) {
+			mutex_unlock(&indio_dev->mlock);
 			return -ETIMEDOUT;
+		}
 	}
 
 	return 0;

drivers/iio/adc/stm32-dfsdm-adc.c

@@ -54,7 +54,6 @@ struct stm32_dfsdm_adc {
 	struct stm32_dfsdm *dfsdm;
 	const struct stm32_dfsdm_dev_data *dev_data;
 	unsigned int fl_id;
-	unsigned int ch_id;
 
 	/* ADC specific */
 	unsigned int oversamp;
@@ -384,7 +383,7 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev,
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
 	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
-	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel];
 	unsigned int sample_freq = adc->sample_freq;
 	unsigned int spi_freq;
 	int ret;
@@ -419,18 +418,20 @@ static ssize_t dfsdm_adc_audio_set_spiclk(struct iio_dev *indio_dev,
 	return len;
 }
 
-static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc, bool dma)
+static int stm32_dfsdm_start_conv(struct stm32_dfsdm_adc *adc,
+				  const struct iio_chan_spec *chan,
+				  bool dma)
 {
 	struct regmap *regmap = adc->dfsdm->regmap;
 	int ret;
 	unsigned int dma_en = 0, cont_en = 0;
 
-	ret = stm32_dfsdm_start_channel(adc->dfsdm, adc->ch_id);
+	ret = stm32_dfsdm_start_channel(adc->dfsdm, chan->channel);
 	if (ret < 0)
 		return ret;
 
 	ret = stm32_dfsdm_filter_configure(adc->dfsdm, adc->fl_id,
-					   adc->ch_id);
+					   chan->channel);
 	if (ret < 0)
 		goto stop_channels;
 
@@ -464,12 +465,13 @@ stop_channels:
 
 	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
 			   DFSDM_CR1_RCONT_MASK, 0);
-	stm32_dfsdm_stop_channel(adc->dfsdm, adc->fl_id);
+	stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel);
 
 	return ret;
 }
 
-static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
+static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc,
+				  const struct iio_chan_spec *chan)
 {
 	struct regmap *regmap = adc->dfsdm->regmap;
 
@@ -482,7 +484,7 @@ static void stm32_dfsdm_stop_conv(struct stm32_dfsdm_adc *adc)
 	regmap_update_bits(regmap, DFSDM_CR1(adc->fl_id),
 			   DFSDM_CR1_RCONT_MASK, 0);
 
-	stm32_dfsdm_stop_channel(adc->dfsdm, adc->ch_id);
+	stm32_dfsdm_stop_channel(adc->dfsdm, chan->channel);
 }
 
 static int stm32_dfsdm_set_watermark(struct iio_dev *indio_dev,
@@ -609,6 +611,7 @@ static int stm32_dfsdm_adc_dma_start(struct iio_dev *indio_dev)
 static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	const struct iio_chan_spec *chan = &indio_dev->channels[0];
 	int ret;
 
 	/* Reset adc buffer index */
@@ -618,7 +621,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
 	if (ret < 0)
 		return ret;
 
-	ret = stm32_dfsdm_start_conv(adc, true);
+	ret = stm32_dfsdm_start_conv(adc, chan, true);
 	if (ret) {
 		dev_err(&indio_dev->dev, "Can't start conversion\n");
 		goto stop_dfsdm;
@@ -635,7 +638,7 @@ static int stm32_dfsdm_postenable(struct iio_dev *indio_dev)
 	return 0;
 
 err_stop_conv:
-	stm32_dfsdm_stop_conv(adc);
+	stm32_dfsdm_stop_conv(adc, chan);
 stop_dfsdm:
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
 
@@ -645,11 +648,12 @@ stop_dfsdm:
 static int stm32_dfsdm_predisable(struct iio_dev *indio_dev)
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
+	const struct iio_chan_spec *chan = &indio_dev->channels[0];
 
 	if (adc->dma_chan)
 		dmaengine_terminate_all(adc->dma_chan);
 
-	stm32_dfsdm_stop_conv(adc);
+	stm32_dfsdm_stop_conv(adc, chan);
 
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
 
@@ -730,7 +734,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
 	if (ret < 0)
 		goto stop_dfsdm;
 
-	ret = stm32_dfsdm_start_conv(adc, false);
+	ret = stm32_dfsdm_start_conv(adc, chan, false);
 	if (ret < 0) {
 		regmap_update_bits(adc->dfsdm->regmap, DFSDM_CR2(adc->fl_id),
 				   DFSDM_CR2_REOCIE_MASK, DFSDM_CR2_REOCIE(0));
@@ -751,7 +755,7 @@ static int stm32_dfsdm_single_conv(struct iio_dev *indio_dev,
 	else
 		ret = IIO_VAL_INT;
 
-	stm32_dfsdm_stop_conv(adc);
+	stm32_dfsdm_stop_conv(adc, chan);
 
 stop_dfsdm:
 	stm32_dfsdm_stop_dfsdm(adc->dfsdm);
@@ -765,7 +769,7 @@ static int stm32_dfsdm_write_raw(struct iio_dev *indio_dev,
 {
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
 	struct stm32_dfsdm_filter *fl = &adc->dfsdm->fl_list[adc->fl_id];
-	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[adc->ch_id];
+	struct stm32_dfsdm_channel *ch = &adc->dfsdm->ch_list[chan->channel];
 	unsigned int spi_freq = adc->spi_freq;
 	int ret = -EINVAL;
 
@@ -972,7 +976,6 @@ static int stm32_dfsdm_adc_chan_init_one(struct iio_dev *indio_dev,
 	}
 	ch->scan_type.realbits = 24;
 	ch->scan_type.storagebits = 32;
-	adc->ch_id = ch->channel;
 
 	return stm32_dfsdm_chan_configure(adc->dfsdm,
 					  &adc->dfsdm->ch_list[ch->channel]);
@@ -1001,7 +1004,7 @@ static int stm32_dfsdm_audio_init(struct iio_dev *indio_dev)
 	}
 	ch->info_mask_separate = BIT(IIO_CHAN_INFO_SAMP_FREQ);
 
-	d_ch = &adc->dfsdm->ch_list[adc->ch_id];
+	d_ch = &adc->dfsdm->ch_list[ch->channel];
 	if (d_ch->src != DFSDM_CHANNEL_SPI_CLOCK_EXTERNAL)
 		adc->spi_freq = adc->dfsdm->spi_master_freq;
 
@@ -1042,8 +1045,8 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 		return -ENOMEM;
 
 	for (chan_idx = 0; chan_idx < num_ch; chan_idx++) {
-		ch->scan_index = chan_idx;
-		ret = stm32_dfsdm_adc_chan_init_one(indio_dev, ch);
+		ch[chan_idx].scan_index = chan_idx;
+		ret = stm32_dfsdm_adc_chan_init_one(indio_dev, &ch[chan_idx]);
 		if (ret < 0) {
 			dev_err(&indio_dev->dev, "Channels init failed\n");
 			return ret;

drivers/iio/adc/stm32-dfsdm-core.c

@@ -83,7 +83,7 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm)
 {
 	struct dfsdm_priv *priv = container_of(dfsdm, struct dfsdm_priv, dfsdm);
 	struct device *dev = &priv->pdev->dev;
-	unsigned int clk_div = priv->spi_clk_out_div;
+	unsigned int clk_div = priv->spi_clk_out_div, clk_src;
 	int ret;
 
 	if (atomic_inc_return(&priv->n_active_ch) == 1) {
@@ -100,6 +100,14 @@ int stm32_dfsdm_start_dfsdm(struct stm32_dfsdm *dfsdm)
 			}
 		}
 
+		/* select clock source, e.g. 0 for "dfsdm" or 1 for "audio" */
+		clk_src = priv->aclk ? 1 : 0;
+		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
+					 DFSDM_CHCFGR1_CKOUTSRC_MASK,
+					 DFSDM_CHCFGR1_CKOUTSRC(clk_src));
+		if (ret < 0)
+			goto disable_aclk;
+
 		/* Output the SPI CLKOUT (if clk_div == 0 clock if OFF) */
 		ret = regmap_update_bits(dfsdm->regmap, DFSDM_CHCFGR1(0),
 					 DFSDM_CHCFGR1_CKOUTDIV_MASK,
@@ -274,7 +282,7 @@ static int stm32_dfsdm_probe(struct platform_device *pdev)
 
 	dfsdm->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dfsdm",
 						  dfsdm->base,
-						  &stm32h7_dfsdm_regmap_cfg);
+						  dev_data->regmap_cfg);
 	if (IS_ERR(dfsdm->regmap)) {
 		ret = PTR_ERR(dfsdm->regmap);
 		dev_err(&pdev->dev, "%s: Failed to allocate regmap: %d\n",

drivers/iio/chemical/ccs811.c

@@ -133,6 +133,9 @@ static int ccs811_start_sensor_application(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
+	if ((ret & CCS811_STATUS_FW_MODE_APPLICATION))
+		return 0;
+
 	if ((ret & CCS811_STATUS_APP_VALID_MASK) !=
 	    CCS811_STATUS_APP_VALID_LOADED)
 		return -EIO;

drivers/iio/pressure/st_pressure_core.c

@@ -640,7 +640,7 @@ int st_press_common_probe(struct iio_dev *indio_dev)
 		       press_data->sensor_settings->drdy_irq.int2.addr))
 		pdata =	(struct st_sensors_platform_data *)&default_press_pdata;
 
-	err = st_sensors_init_sensor(indio_dev, press_data->dev->platform_data);
+	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)
 		goto st_press_power_off;
 

drivers/infiniband/core/cma.c

@@ -3069,7 +3069,8 @@ static int cma_port_is_unique(struct rdma_bind_list *bind_list,
 			continue;
 
 		/* different dest port -> unique */
-		if (!cma_any_port(cur_daddr) &&
+		if (!cma_any_port(daddr) &&
+		    !cma_any_port(cur_daddr) &&
 		    (dport != cur_dport))
 			continue;
 
@@ -3080,7 +3081,8 @@ static int cma_port_is_unique(struct rdma_bind_list *bind_list,
 			continue;
 
 		/* different dst address -> unique */
-		if (!cma_any_addr(cur_daddr) &&
+		if (!cma_any_addr(daddr) &&
+		    !cma_any_addr(cur_daddr) &&
 		    cma_addr_cmp(daddr, cur_daddr))
 			continue;
 
@@ -3378,13 +3380,13 @@ int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr)
 		}
 #endif
 	}
+	daddr = cma_dst_addr(id_priv);
+	daddr->sa_family = addr->sa_family;
+
 	ret = cma_get_port(id_priv);
 	if (ret)
 		goto err2;
 
-	daddr = cma_dst_addr(id_priv);
-	daddr->sa_family = addr->sa_family;
-
 	return 0;
 err2:
 	if (id_priv->cma_dev)
@@ -4173,6 +4175,9 @@ int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
 	struct cma_multicast *mc;
 	int ret;
 
+	if (!id->device)
+		return -EINVAL;
+
 	id_priv = container_of(id, struct rdma_id_private, id);
 	if (!cma_comp(id_priv, RDMA_CM_ADDR_BOUND) &&
 	    !cma_comp(id_priv, RDMA_CM_ADDR_RESOLVED))

drivers/infiniband/core/ucma.c

@@ -132,7 +132,7 @@ static inline struct ucma_context *_ucma_find_context(int id,
 	ctx = idr_find(&ctx_idr, id);
 	if (!ctx)
 		ctx = ERR_PTR(-ENOENT);
-	else if (ctx->file != file)
+	else if (ctx->file != file || !ctx->cm_id)
 		ctx = ERR_PTR(-EINVAL);
 	return ctx;
 }
@@ -456,6 +456,7 @@ static ssize_t ucma_create_id(struct ucma_file *file, const char __user *inbuf,
 	struct rdma_ucm_create_id cmd;
 	struct rdma_ucm_create_id_resp resp;
 	struct ucma_context *ctx;
+	struct rdma_cm_id *cm_id;
 	enum ib_qp_type qp_type;
 	int ret;
 
@@ -476,10 +477,10 @@ static ssize_t ucma_create_id(struct ucma_file *file, const char __user *inbuf,
 		return -ENOMEM;
 
 	ctx->uid = cmd.uid;
-	ctx->cm_id = rdma_create_id(current->nsproxy->net_ns,
-				    ucma_event_handler, ctx, cmd.ps, qp_type);
-	if (IS_ERR(ctx->cm_id)) {
-		ret = PTR_ERR(ctx->cm_id);
+	cm_id = rdma_create_id(current->nsproxy->net_ns,
+			       ucma_event_handler, ctx, cmd.ps, qp_type);
+	if (IS_ERR(cm_id)) {
+		ret = PTR_ERR(cm_id);
 		goto err1;
 	}
 
@@ -489,14 +490,19 @@ static ssize_t ucma_create_id(struct ucma_file *file, const char __user *inbuf,
 		ret = -EFAULT;
 		goto err2;
 	}
+
+	ctx->cm_id = cm_id;
 	return 0;
 
 err2:
-	rdma_destroy_id(ctx->cm_id);
+	rdma_destroy_id(cm_id);
 err1:
 	mutex_lock(&mut);
 	idr_remove(&ctx_idr, ctx->id);
 	mutex_unlock(&mut);
+	mutex_lock(&file->mut);
+	list_del(&ctx->list);
+	mutex_unlock(&file->mut);
 	kfree(ctx);
 	return ret;
 }
@@ -664,19 +670,23 @@ static ssize_t ucma_resolve_ip(struct ucma_file *file,
 			       int in_len, int out_len)
 {
 	struct rdma_ucm_resolve_ip cmd;
+	struct sockaddr *src, *dst;
 	struct ucma_context *ctx;
 	int ret;
 
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
+	src = (struct sockaddr *) &cmd.src_addr;
+	dst = (struct sockaddr *) &cmd.dst_addr;
+	if (!rdma_addr_size(src) || !rdma_addr_size(dst))
+		return -EINVAL;
+
 	ctx = ucma_get_ctx(file, cmd.id);
 	if (IS_ERR(ctx))
 		return PTR_ERR(ctx);
 
-	ret = rdma_resolve_addr(ctx->cm_id, (struct sockaddr *) &cmd.src_addr,
-				(struct sockaddr *) &cmd.dst_addr,
-				cmd.timeout_ms);
+	ret = rdma_resolve_addr(ctx->cm_id, src, dst, cmd.timeout_ms);
 	ucma_put_ctx(ctx);
 	return ret;
 }
@@ -1349,7 +1359,7 @@ static ssize_t ucma_process_join(struct ucma_file *file,
 		return -ENOSPC;
 
 	addr = (struct sockaddr *) &cmd->addr;
-	if (!cmd->addr_size || (cmd->addr_size != rdma_addr_size(addr)))
+	if (cmd->addr_size != rdma_addr_size(addr))
 		return -EINVAL;
 
 	if (cmd->join_flags == RDMA_MC_JOIN_FLAG_FULLMEMBER)
@@ -1417,6 +1427,9 @@ static ssize_t ucma_join_ip_multicast(struct ucma_file *file,
 	join_cmd.uid = cmd.uid;
 	join_cmd.id = cmd.id;
 	join_cmd.addr_size = rdma_addr_size((struct sockaddr *) &cmd.addr);
+	if (!join_cmd.addr_size)
+		return -EINVAL;
+
 	join_cmd.join_flags = RDMA_MC_JOIN_FLAG_FULLMEMBER;
 	memcpy(&join_cmd.addr, &cmd.addr, join_cmd.addr_size);
 
@@ -1432,6 +1445,9 @@ static ssize_t ucma_join_multicast(struct ucma_file *file,
 	if (copy_from_user(&cmd, inbuf, sizeof(cmd)))
 		return -EFAULT;
 
+	if (!rdma_addr_size((struct sockaddr *)&cmd.addr))
+		return -EINVAL;
+
 	return ucma_process_join(file, &cmd, out_len);
 }
 

drivers/infiniband/hw/bnxt_re/bnxt_re.h

@@ -57,8 +57,8 @@
 #define BNXT_RE_PAGE_SIZE_8M		BIT(BNXT_RE_PAGE_SHIFT_8M)
 #define BNXT_RE_PAGE_SIZE_1G		BIT(BNXT_RE_PAGE_SHIFT_1G)
 
-#define BNXT_RE_MAX_MR_SIZE_LOW		BIT(BNXT_RE_PAGE_SHIFT_1G)
-#define BNXT_RE_MAX_MR_SIZE_HIGH	BIT(39)
+#define BNXT_RE_MAX_MR_SIZE_LOW		BIT_ULL(BNXT_RE_PAGE_SHIFT_1G)
+#define BNXT_RE_MAX_MR_SIZE_HIGH	BIT_ULL(39)
 #define BNXT_RE_MAX_MR_SIZE		BNXT_RE_MAX_MR_SIZE_HIGH
 
 #define BNXT_RE_MAX_QPC_COUNT		(64 * 1024)

drivers/infiniband/hw/bnxt_re/ib_verbs.c

@@ -3598,7 +3598,7 @@ struct ib_mr *bnxt_re_reg_user_mr(struct ib_pd *ib_pd, u64 start, u64 length,
 	int umem_pgs, page_shift, rc;
 
 	if (length > BNXT_RE_MAX_MR_SIZE) {
-		dev_err(rdev_to_dev(rdev), "MR Size: %lld > Max supported:%ld\n",
+		dev_err(rdev_to_dev(rdev), "MR Size: %lld > Max supported:%lld\n",
 			length, BNXT_RE_MAX_MR_SIZE);
 		return ERR_PTR(-ENOMEM);
 	}

drivers/infiniband/hw/bnxt_re/qplib_fp.c

@@ -243,7 +243,7 @@ static void bnxt_qplib_service_nq(unsigned long data)
 	u32 sw_cons, raw_cons;
 	u16 type;
 	int budget = nq->budget;
-	u64 q_handle;
+	uintptr_t q_handle;
 
 	/* Service the NQ until empty */
 	raw_cons = hwq->cons;
@@ -526,7 +526,7 @@ int bnxt_qplib_create_srq(struct bnxt_qplib_res *res,
 
 	/* Configure the request */
 	req.dpi = cpu_to_le32(srq->dpi->dpi);
-	req.srq_handle = cpu_to_le64(srq);
+	req.srq_handle = cpu_to_le64((uintptr_t)srq);
 
 	req.srq_size = cpu_to_le16((u16)srq->hwq.max_elements);
 	pbl = &srq->hwq.pbl[PBL_LVL_0];

drivers/infiniband/hw/mlx5/main.c

@@ -4860,19 +4860,19 @@ static int mlx5_ib_stage_ib_reg_init(struct mlx5_ib_dev *dev)
 	return ib_register_device(&dev->ib_dev, NULL);
 }
 
-static void mlx5_ib_stage_ib_reg_cleanup(struct mlx5_ib_dev *dev)
+static void mlx5_ib_stage_pre_ib_reg_umr_cleanup(struct mlx5_ib_dev *dev)
 {
-	ib_unregister_device(&dev->ib_dev);
+	destroy_umrc_res(dev);
 }
 
-static int mlx5_ib_stage_umr_res_init(struct mlx5_ib_dev *dev)
+static void mlx5_ib_stage_ib_reg_cleanup(struct mlx5_ib_dev *dev)
 {
-	return create_umr_res(dev);
+	ib_unregister_device(&dev->ib_dev);
 }
 
-static void mlx5_ib_stage_umr_res_cleanup(struct mlx5_ib_dev *dev)
+static int mlx5_ib_stage_post_ib_reg_umr_init(struct mlx5_ib_dev *dev)
 {
-	destroy_umrc_res(dev);
+	return create_umr_res(dev);
 }
 
 static int mlx5_ib_stage_delay_drop_init(struct mlx5_ib_dev *dev)
@@ -4982,12 +4982,15 @@ static const struct mlx5_ib_profile pf_profile = {
 	STAGE_CREATE(MLX5_IB_STAGE_BFREG,
 		     mlx5_ib_stage_bfrag_init,
 		     mlx5_ib_stage_bfrag_cleanup),
+	STAGE_CREATE(MLX5_IB_STAGE_PRE_IB_REG_UMR,
+		     NULL,
+		     mlx5_ib_stage_pre_ib_reg_umr_cleanup),
 	STAGE_CREATE(MLX5_IB_STAGE_IB_REG,
 		     mlx5_ib_stage_ib_reg_init,
 		     mlx5_ib_stage_ib_reg_cleanup),
-	STAGE_CREATE(MLX5_IB_STAGE_UMR_RESOURCES,
-		     mlx5_ib_stage_umr_res_init,
-		     mlx5_ib_stage_umr_res_cleanup),
+	STAGE_CREATE(MLX5_IB_STAGE_POST_IB_REG_UMR,
+		     mlx5_ib_stage_post_ib_reg_umr_init,
+		     NULL),
 	STAGE_CREATE(MLX5_IB_STAGE_DELAY_DROP,
 		     mlx5_ib_stage_delay_drop_init,
 		     mlx5_ib_stage_delay_drop_cleanup),