Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem patches
  for 4.15-rc1.

  There are small changes all over here, hyperv driver updates, pcmcia
  driver updates, w1 driver updats, vme driver updates, nvmem driver
  updates, and lots of other little one-off driver updates as well. The
  shortlog has the full details.

  All of these have been in linux-next for quite a while with no
  reported issues"

* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  VME: Return -EBUSY when DMA list in use
  w1: keep balance of mutex locks and refcnts
  MAINTAINERS: Update VME subsystem tree.
  nvmem: sunxi-sid: add support for A64/H5's SID controller
  nvmem: imx-ocotp: Update module description
  nvmem: imx-ocotp: Enable i.MX7D OTP write support
  nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
  nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
  nvmem: imx-ocotp: Add support for banked OTP addressing
  nvmem: imx-ocotp: Pass parameters via a struct
  nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
  nvmem: uniphier: add UniPhier eFuse driver
  dt-bindings: nvmem: add description for UniPhier eFuse
  nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
  nvmem: qfprom: fix different address space warnings of sparse
  nvmem: mtk-efuse: fix different address space warnings of sparse
  nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
  nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
  thunderbolt: tb: fix use after free in tb_activate_pcie_devices
  MAINTAINERS: Add git tree for Thunderbolt development
  ...

Documentation/ABI/stable/sysfs-bus-vmbus

@@ -41,3 +41,73 @@ KernelVersion:	4.5
 Contact:	K. Y. Srinivasan <kys@microsoft.com>
 Description:	The 16 bit vendor ID of the device
 Users:		tools/hv/lsvmbus and user level RDMA libraries
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	VCPU (sub)channel is affinitized to
+Users:		tools/hv/lsvmbus and other debuggig tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	VCPU (sub)channel is affinitized to
+Users:		tools/hv/lsvmbus and other debuggig tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Inbound channel signaling state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel signaling latency
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Outbound channel signaling state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel interrupt pending state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes availabble to read
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes availabble to write
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/events
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have signaled the host
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have taken an interrupt (incoming)
+Users:		Debugging tools

Documentation/ABI/testing/sysfs-driver-w1_ds28e17

@@ -0,0 +1,21 @@
+What:		/sys/bus/w1/devices/19-<id>/speed
+Date:		Sep 2017
+KernelVersion:	4.14
+Contact:	Jan Kandziora <jjj@gmx.de>
+Description:	When written, this file sets the I2C speed on the connected
+		DS28E17 chip. When read, it reads the current setting from
+		the DS28E17 chip.
+		Valid values: 100, 400, 900 [kBaud].
+		Default 100, can be set by w1_ds28e17.speed= module parameter.
+Users:		w1_ds28e17 driver
+
+What:		/sys/bus/w1/devices/19-<id>/stretch
+Date:		Sep 2017
+KernelVersion:	4.14
+Contact:	Jan Kandziora <jjj@gmx.de>
+Description:	When written, this file sets the multiplier used to calculate
+		the busy timeout for I2C operations on the connected DS28E17
+		chip. When read, returns the current setting.
+		Valid values: 1 to 9.
+		Default 1, can be set by w1_ds28e17.stretch= module parameter.
+Users:		w1_ds28e17 driver

Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt

@@ -5,6 +5,7 @@ Required properties:
   "allwinner,sun4i-a10-sid"
   "allwinner,sun7i-a20-sid"
   "allwinner,sun8i-h3-sid"
+  "allwinner,sun50i-a64-sid"
 
 - reg: Should contain registers location and length
 

Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt

@@ -1,4 +1,4 @@
-= Amlogic eFuse device tree bindings =
+= Amlogic Meson GX eFuse device tree bindings =
 
 Required properties:
 - compatible: should be "amlogic,meson-gxbb-efuse"

Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt

@@ -0,0 +1,22 @@
+Amlogic Meson6/Meson8/Meson8b efuse
+
+Required Properties:
+- compatible: depending on the SoC this should be one of:
+	- "amlogic,meson6-efuse"
+	- "amlogic,meson8-efuse"
+	- "amlogic,meson8b-efuse"
+- reg: base address and size of the efuse registers
+- clocks: a reference to the efuse core gate clock
+- clock-names: must be "core"
+
+All properties and sub-nodes as well as the consumer bindings
+defined in nvmem.txt in this directory are also supported.
+
+
+Example:
+	efuse: nvmem@0 {
+		compatible = "amlogic,meson8-efuse";
+		reg = <0x0 0x2000>;
+		clocks = <&clkc CLKID_EFUSE>;
+		clock-names = "core";
+	};

Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt

@@ -6,6 +6,7 @@ Required properties:
   - "rockchip,rk3188-efuse" - for RK3188 SoCs.
   - "rockchip,rk3228-efuse" - for RK3228 SoCs.
   - "rockchip,rk3288-efuse" - for RK3288 SoCs.
+  - "rockchip,rk3368-efuse" - for RK3368 SoCs.
   - "rockchip,rk3399-efuse" - for RK3399 SoCs.
 - reg: Should contain the registers location and exact eFuse size
 - clocks: Should be the clock id of eFuse

Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt

@@ -0,0 +1,20 @@
+Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D
+Secure Non-Volatile Storage.
+
+This DT node should be represented as a sub-node of a "syscon",
+"simple-mfd" node.
+
+Required properties:
+- compatible: should be one of the fallowing variants:
+	"fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S
+	"fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL
+
+Example:
+snvs: snvs@020cc000 {
+	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+	reg = <0x020cc000 0x4000>;
+
+	snvs_lpgpr: snvs-lpgpr {
+		compatible = "fsl,imx6q-snvs-lpgpr";
+	};
+};

Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt

@@ -0,0 +1,49 @@
+= UniPhier eFuse device tree bindings =
+
+This UniPhier eFuse must be under soc-glue.
+
+Required properties:
+- compatible: should be "socionext,uniphier-efuse"
+- reg: should contain the register location and length
+
+= Data cells =
+Are child nodes of efuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	soc-glue@5f900000 {
+		compatible = "socionext,uniphier-ld20-soc-glue-debug",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5f900000 0x2000>;
+
+		efuse@100 {
+			compatible = "socionext,uniphier-efuse";
+			reg = <0x100 0x28>;
+		};
+
+		efuse@200 {
+			compatible = "socionext,uniphier-efuse";
+			reg = <0x200 0x68>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Data cells */
+			usb_mon: usb-mon@54 {
+				reg = <0x54 0xc>;
+			};
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	usb {
+		...
+		nvmem-cells = <&usb_mon>;
+		nvmem-cell-names = "usb_mon";
+	}

Documentation/trace/coresight-cpu-debug.txt

@@ -149,11 +149,23 @@ If you want to limit idle states at boot time, you can use "nohlt" or
 
 At the runtime you can disable idle states with below methods:
 
-Set latency request to /dev/cpu_dma_latency to disable all CPUs specific idle
-states (if latency = 0uS then disable all idle states):
-# echo "what_ever_latency_you_need_in_uS" > /dev/cpu_dma_latency
-
-Disable specific CPU's specific idle state:
+It is possible to disable CPU idle states by way of the PM QoS
+subsystem, more specifically by using the "/dev/cpu_dma_latency"
+interface (see Documentation/power/pm_qos_interface.txt for more
+details).  As specified in the PM QoS documentation the requested
+parameter will stay in effect until the file descriptor is released.
+For example:
+
+# exec 3<> /dev/cpu_dma_latency; echo 0 >&3
+...
+Do some work...
+...
+# exec 3<>-
+
+The same can also be done from an application program.
+
+Disable specific CPU's specific idle state from cpuidle sysfs (see
+Documentation/cpuidle/sysfs.txt):
 # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable
 
 

Documentation/w1/slaves/00-INDEX

@@ -10,3 +10,5 @@ w1_ds2438
 	- The Maxim/Dallas Semiconductor ds2438 smart battery monitor.
 w1_ds28e04
 	- The Maxim/Dallas Semiconductor ds28e04 eeprom.
+w1_ds28e17
+	- The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge.

Documentation/w1/slaves/w1_ds28e17

@@ -0,0 +1,68 @@
+Kernel driver w1_ds28e17
+========================
+
+Supported chips:
+  * Maxim DS28E17 1-Wire-to-I2C Master Bridge
+
+supported family codes:
+	W1_FAMILY_DS28E17  0x19
+
+Author: Jan Kandziora <jjj@gmx.de>
+
+
+Description
+-----------
+The DS28E17 is a Onewire slave device which acts as an I2C bus master.
+
+This driver creates a new I2C bus for any DS28E17 device detected. I2C buses
+come and go as the DS28E17 devices come and go. I2C slave devices connected to
+a DS28E17 can be accessed by the kernel or userspace tools as if they were
+connected to a "native" I2C bus master.
+
+
+An udev rule like the following
+-------------------------------------------------------------------------------
+SUBSYSTEM=="i2c-dev", KERNEL=="i2c-[0-9]*", ATTRS{name}=="w1-19-*", \
+        SYMLINK+="i2c-$attr{name}"
+-------------------------------------------------------------------------------
+may be used to create stable /dev/i2c- entries based on the unique id of the
+DS28E17 chip.
+
+
+Driver parameters are:
+
+speed:
+	This sets up the default I2C speed a DS28E17 get configured for as soon
+	it is connected. The power-on default	of the DS28E17 is 400kBaud, but
+	chips may come and go on the Onewire bus without being de-powered and
+	as soon the "w1_ds28e17" driver notices a freshly connected, or
+	reconnected DS28E17 device on the Onewire bus, it will re-apply this
+	setting.
+
+	Valid values are 100, 400, 900 [kBaud]. Any other value means to leave
+	alone the current DS28E17 setting on detect. The default value is 100.
+
+stretch:
+	This sets up the default stretch value used for freshly connected
+	DS28E17 devices. It is a multiplier used on the calculation of the busy
+	wait time for an I2C transfer. This is to account for I2C slave devices
+	which make heavy use of the I2C clock stretching feature and thus, the
+	needed timeout cannot be pre-calculated correctly. As the w1_ds28e17
+	driver checks the DS28E17's busy flag in a loop after the precalculated
+	wait time, it should be hardly needed to tweak this setting.
+
+	Leave it at 1 unless you get ETIMEDOUT errors and a "w1_slave_driver
+	19-00000002dbd8: busy timeout" in the kernel log.
+
+	Valid values are 1 to 9. The default is 1.
+
+
+The driver creates sysfs files /sys/bus/w1/devices/19-<id>/speed and
+/sys/bus/w1/devices/19-<id>/stretch for each device, preloaded with the default
+settings from the driver parameters. They may be changed anytime. In addition a
+directory /sys/bus/w1/devices/19-<id>/i2c-<nnn> for the I2C bus master sysfs
+structure is created.
+
+
+See https://github.com/ianka/w1_ds28e17 for even more information.
+

MAINTAINERS

@@ -5474,7 +5474,7 @@ K:	fmc_d.*register
 
 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@kernel.org>
-R:	Moritz Fischer <mdf@kernel.org>
+M:	Moritz Fischer <mdf@kernel.org>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
@@ -13390,6 +13390,7 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 M:	Michael Jamet <michael.jamet@intel.com>
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Yehezkel Bernat <yehezkel.bernat@intel.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
 S:	Maintained
 F:	drivers/thunderbolt/
 F:	include/linux/thunderbolt.h
@@ -14485,7 +14486,7 @@ M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	devel@driverdev.osuosl.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst
 F:	drivers/staging/vme/
 F:	drivers/vme/

arch/x86/hyperv/hv_init.c

@@ -210,9 +210,10 @@ void hyperv_cleanup(void)
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);
 
-void hyperv_report_panic(struct pt_regs *regs)
+void hyperv_report_panic(struct pt_regs *regs, long err)
 {
 	static bool panic_reported;
+	u64 guest_id;
 
 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
@@ -223,11 +224,13 @@ void hyperv_report_panic(struct pt_regs *regs)
 		return;
 	panic_reported = true;
 
-	wrmsrl(HV_X64_MSR_CRASH_P0, regs->ip);
-	wrmsrl(HV_X64_MSR_CRASH_P1, regs->ax);
-	wrmsrl(HV_X64_MSR_CRASH_P2, regs->bx);
-	wrmsrl(HV_X64_MSR_CRASH_P3, regs->cx);
-	wrmsrl(HV_X64_MSR_CRASH_P4, regs->dx);
+	rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
+
+	wrmsrl(HV_X64_MSR_CRASH_P0, err);
+	wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
+	wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
+	wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
+	wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);
 
 	/*
 	 * Let Hyper-V know there is crash data available

arch/x86/include/asm/mshyperv.h

@@ -311,7 +311,7 @@ static inline int hv_cpu_number_to_vp_number(int cpu_number)
 void hyperv_init(void);
 void hyperv_setup_mmu_ops(void);
 void hyper_alloc_mmu(void);
-void hyperv_report_panic(struct pt_regs *regs);
+void hyperv_report_panic(struct pt_regs *regs, long err);
 bool hv_is_hypercall_page_setup(void);
 void hyperv_cleanup(void);
 #else /* CONFIG_HYPERV */

drivers/android/binder.c

@@ -2192,7 +2192,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
 						     off_start,
 						     offp - off_start);
 			if (!parent) {
-				pr_err("transaction release %d bad parent offset",
+				pr_err("transaction release %d bad parent offset\n",
 				       debug_id);
 				continue;
 			}

drivers/android/binder_alloc.c

@@ -186,12 +186,12 @@ struct binder_buffer *binder_alloc_prepare_to_free(struct binder_alloc *alloc,
 }
 
 static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
-				    void *start, void *end,
-				    struct vm_area_struct *vma)
+				    void *start, void *end)
 {
 	void *page_addr;
 	unsigned long user_page_addr;
 	struct binder_lru_page *page;
+	struct vm_area_struct *vma = NULL;
 	struct mm_struct *mm = NULL;
 	bool need_mm = false;
 
@@ -215,7 +215,7 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
 		}
 	}
 
-	if (!vma && need_mm && mmget_not_zero(alloc->vma_vm_mm))
+	if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
 		mm = alloc->vma_vm_mm;
 
 	if (mm) {
@@ -437,7 +437,7 @@ struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc,
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
 	ret = binder_update_page_range(alloc, 1,
-	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL);
+	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr);
 	if (ret)
 		return ERR_PTR(ret);
 
@@ -478,7 +478,7 @@ struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc,
 err_alloc_buf_struct_failed:
 	binder_update_page_range(alloc, 0,
 				 (void *)PAGE_ALIGN((uintptr_t)buffer->data),
-				 end_page_addr, NULL);
+				 end_page_addr);
 	return ERR_PTR(-ENOMEM);
 }
 
@@ -562,8 +562,7 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
 				   alloc->pid, buffer->data,
 				   prev->data, next ? next->data : NULL);
 		binder_update_page_range(alloc, 0, buffer_start_page(buffer),
-					 buffer_start_page(buffer) + PAGE_SIZE,
-					 NULL);
+					 buffer_start_page(buffer) + PAGE_SIZE);
 	}
 	list_del(&buffer->entry);
 	kfree(buffer);
@@ -600,8 +599,7 @@ static void binder_free_buf_locked(struct binder_alloc *alloc,
 
 	binder_update_page_range(alloc, 0,
 		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
-		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
-		NULL);
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK));
 
 	rb_erase(&buffer->rb_node, &alloc->allocated_buffers);
 	buffer->free = 1;
@@ -984,7 +982,7 @@ binder_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
 	return ret;
 }
 
-struct shrinker binder_shrinker = {
+static struct shrinker binder_shrinker = {
 	.count_objects = binder_shrink_count,
 	.scan_objects = binder_shrink_scan,
 	.seeks = DEFAULT_SEEKS,

drivers/char/pcmcia/cm4000_cs.c

@@ -659,9 +659,9 @@ static void terminate_monitor(struct cm4000_dev *dev)
  * is already doing that for you.
  */
 
-static void monitor_card(unsigned long p)
+static void monitor_card(struct timer_list *t)
 {
-	struct cm4000_dev *dev = (struct cm4000_dev *) p;
+	struct cm4000_dev *dev = from_timer(dev, t, timer);
 	unsigned int iobase = dev->p_dev->resource[0]->start;
 	unsigned short s;
 	struct ptsreq ptsreq;
@@ -1374,7 +1374,7 @@ static void start_monitor(struct cm4000_dev *dev)
 	DEBUGP(3, dev, "-> start_monitor\n");
 	if (!dev->monitor_running) {
 		DEBUGP(5, dev, "create, init and add timer\n");
-		setup_timer(&dev->timer, monitor_card, (unsigned long)dev);
+		timer_setup(&dev->timer, monitor_card, 0);
 		dev->monitor_running = 1;
 		mod_timer(&dev->timer, jiffies);
 	} else

drivers/char/pcmcia/cm4040_cs.c

@@ -104,9 +104,9 @@ static inline unsigned char xinb(unsigned short port)
 
 /* poll the device fifo status register.  not to be confused with
  * the poll syscall. */
-static void cm4040_do_poll(unsigned long dummy)
+static void cm4040_do_poll(struct timer_list *t)
 {
-	struct reader_dev *dev = (struct reader_dev *) dummy;
+	struct reader_dev *dev = from_timer(dev, t, poll_timer);
 	unsigned int obs = xinb(dev->p_dev->resource[0]->start
 				+ REG_OFFSET_BUFFER_STATUS);
 
@@ -465,7 +465,6 @@ static int cm4040_open(struct inode *inode, struct file *filp)
 
 	link->open = 1;
 
-	dev->poll_timer.data = (unsigned long) dev;
 	mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
 
 	DEBUGP(2, dev, "<- cm4040_open (successfully)\n");
@@ -585,7 +584,7 @@ static int reader_probe(struct pcmcia_device *link)
 	init_waitqueue_head(&dev->poll_wait);
 	init_waitqueue_head(&dev->read_wait);
 	init_waitqueue_head(&dev->write_wait);
-	setup_timer(&dev->poll_timer, cm4040_do_poll, 0);
+	timer_setup(&dev->poll_timer, cm4040_do_poll, 0);
 
 	ret = reader_config(link, i);
 	if (ret) {

drivers/char/pcmcia/synclink_cs.c

@@ -375,7 +375,7 @@ static void reset_device(MGSLPC_INFO *info);
 static void hdlc_mode(MGSLPC_INFO *info);
 static void async_mode(MGSLPC_INFO *info);
 
-static void tx_timeout(unsigned long context);
+static void tx_timeout(struct timer_list *t);
 
 static int carrier_raised(struct tty_port *port);
 static void dtr_rts(struct tty_port *port, int onoff);
@@ -1289,7 +1289,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
 
 	memset(&info->icount, 0, sizeof(info->icount));
 
-	setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+	timer_setup(&info->tx_timer, tx_timeout, 0);
 
 	/* Allocate and claim adapter resources */
 	retval = claim_resources(info);
@@ -3846,9 +3846,9 @@ static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
 /* HDLC frame time out
  * update stats and do tx completion processing
  */
-static void tx_timeout(unsigned long context)
+static void tx_timeout(struct timer_list *t)
 {
-	MGSLPC_INFO *info = (MGSLPC_INFO*)context;
+	MGSLPC_INFO *info = from_timer(info, t, tx_timer);
 	unsigned long flags;
 
 	if (debug_level >= DEBUG_LEVEL_INFO)

drivers/fpga/xilinx-pr-decoupler.c

@@ -79,7 +79,7 @@ static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge)
 	return !status;
 }
 
-static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
+static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
 	.enable_set = xlnx_pr_decoupler_enable_set,
 	.enable_show = xlnx_pr_decoupler_enable_show,
 };

drivers/fsi/fsi-core.c

@@ -185,7 +185,7 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
 	return 0;
 }
 
-int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
 {
 	struct fsi_master *master = slave->master;
 	uint32_t irq, stat;
@@ -215,8 +215,8 @@ int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
 
 static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);
 
-int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr,
-		size_t size)
+static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
+				  uint32_t addr, size_t size)
 {
 	struct fsi_master *master = slave->master;
 	int rc, link;

drivers/hv/Makefile

@@ -3,7 +3,9 @@ obj-$(CONFIG_HYPERV)		+= hv_vmbus.o
 obj-$(CONFIG_HYPERV_UTILS)	+= hv_utils.o
 obj-$(CONFIG_HYPERV_BALLOON)	+= hv_balloon.o
 
+CFLAGS_hv_trace.o = -I$(src)
+
 hv_vmbus-y := vmbus_drv.o \
 		 hv.o connection.o channel.o \
-		 channel_mgmt.o ring_buffer.o
+		 channel_mgmt.o ring_buffer.o hv_trace.o
 hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o hv_fcopy.o hv_utils_transport.o

drivers/hv/channel.c

@@ -43,6 +43,8 @@ void vmbus_setevent(struct vmbus_channel *channel)
 {
 	struct hv_monitor_page *monitorpage;
 
+	trace_vmbus_setevent(channel);
+
 	/*
 	 * For channels marked as in "low latency" mode
 	 * bypass the monitor page mechanism.
@@ -185,6 +187,8 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 	ret = vmbus_post_msg(open_msg,
 			     sizeof(struct vmbus_channel_open_channel), true);
 
+	trace_vmbus_open(open_msg, ret);
+
 	if (ret != 0) {
 		err = ret;
 		goto error_clean_msglist;
@@ -234,13 +238,18 @@ int vmbus_send_tl_connect_request(const uuid_le *shv_guest_servie_id,
 				  const uuid_le *shv_host_servie_id)
 {
 	struct vmbus_channel_tl_connect_request conn_msg;
+	int ret;
 
 	memset(&conn_msg, 0, sizeof(conn_msg));
 	conn_msg.header.msgtype = CHANNELMSG_TL_CONNECT_REQUEST;
 	conn_msg.guest_endpoint_id = *shv_guest_servie_id;
 	conn_msg.host_service_id = *shv_host_servie_id;
 
-	return vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+	ret = vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+
+	trace_vmbus_send_tl_connect_request(&conn_msg, ret);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(vmbus_send_tl_connect_request);
 
@@ -433,6 +442,9 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,
 
 	ret = vmbus_post_msg(gpadlmsg, msginfo->msgsize -
 			     sizeof(*msginfo), true);
+
+	trace_vmbus_establish_gpadl_header(gpadlmsg, ret);
+
 	if (ret != 0)
 		goto cleanup;
 
@@ -448,6 +460,9 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,
 		ret = vmbus_post_msg(gpadl_body,
 				     submsginfo->msgsize - sizeof(*submsginfo),
 				     true);
+
+		trace_vmbus_establish_gpadl_body(gpadl_body, ret);
+
 		if (ret != 0)
 			goto cleanup;
 
@@ -511,6 +526,8 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
 			     true);
 
+	trace_vmbus_teardown_gpadl(msg, ret);
+
 	if (ret)
 		goto post_msg_err;
 
@@ -589,6 +606,8 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_close_channel),
 			     true);
 
+	trace_vmbus_close_internal(msg, ret);
+
 	if (ret) {
 		pr_err("Close failed: close post msg return is %d\n", ret);
 		/*
@@ -745,6 +764,7 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
 	desc.dataoffset8 = descsize >> 3; /* in 8-bytes granularity */
 	desc.length8 = (u16)(packetlen_aligned >> 3);
 	desc.transactionid = requestid;
+	desc.reserved = 0;
 	desc.rangecount = pagecount;
 
 	for (i = 0; i < pagecount; i++) {
@@ -788,6 +808,7 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
 	desc->dataoffset8 = desc_size >> 3; /* in 8-bytes granularity */
 	desc->length8 = (u16)(packetlen_aligned >> 3);
 	desc->transactionid = requestid;
+	desc->reserved = 0;
 	desc->rangecount = 1;
 
 	bufferlist[0].iov_base = desc;

drivers/hv/channel_mgmt.c

@@ -350,7 +350,7 @@ static void free_channel(struct vmbus_channel *channel)
 {
 	tasklet_kill(&channel->callback_event);
 
-	kfree_rcu(channel, rcu);
+	kobject_put(&channel->kobj);
 }
 
 static void percpu_channel_enq(void *arg)
@@ -373,12 +373,15 @@ static void percpu_channel_deq(void *arg)
 static void vmbus_release_relid(u32 relid)
 {
 	struct vmbus_channel_relid_released msg;
+	int ret;
 
 	memset(&msg, 0, sizeof(struct vmbus_channel_relid_released));
 	msg.child_relid = relid;
 	msg.header.msgtype = CHANNELMSG_RELID_RELEASED;
-	vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
-		       true);
+	ret = vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
+			     true);
+
+	trace_vmbus_release_relid(&msg, ret);
 }
 
 void hv_process_channel_removal(u32 relid)
@@ -520,6 +523,14 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	newchannel->state = CHANNEL_OPEN_STATE;
 
 	if (!fnew) {
+		struct hv_device *dev
+			= newchannel->primary_channel->device_obj;
+
+		if (vmbus_add_channel_kobj(dev, newchannel)) {
+			atomic_dec(&vmbus_connection.offer_in_progress);
+			goto err_free_chan;
+		}
+
 		if (channel->sc_creation_callback != NULL)
 			channel->sc_creation_callback(newchannel);
 		newchannel->probe_done = true;
@@ -805,6 +816,8 @@ static void vmbus_onoffer(struct vmbus_channel_message_header *hdr)
 
 	offer = (struct vmbus_channel_offer_channel *)hdr;
 
+	trace_vmbus_onoffer(offer);
+
 	/* Allocate the channel object and save this offer. */
 	newchannel = alloc_channel();
 	if (!newchannel) {
@@ -846,6 +859,8 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
 
 	rescind = (struct vmbus_channel_rescind_offer *)hdr;
 
+	trace_vmbus_onoffer_rescind(rescind);
+
 	/*
 	 * The offer msg and the corresponding rescind msg
 	 * from the host are guranteed to be ordered -
@@ -974,6 +989,8 @@ static void vmbus_onopen_result(struct vmbus_channel_message_header *hdr)
 
 	result = (struct vmbus_channel_open_result *)hdr;
 
+	trace_vmbus_onopen_result(result);
+
 	/*
 	 * Find the open msg, copy the result and signal/unblock the wait event
 	 */
@@ -1018,6 +1035,8 @@ static void vmbus_ongpadl_created(struct vmbus_channel_message_header *hdr)
 
 	gpadlcreated = (struct vmbus_channel_gpadl_created *)hdr;
 
+	trace_vmbus_ongpadl_created(gpadlcreated);
+
 	/*
 	 * Find the establish msg, copy the result and signal/unblock the wait
 	 * event
@@ -1066,6 +1085,8 @@ static void vmbus_ongpadl_torndown(
 
 	gpadl_torndown = (struct vmbus_channel_gpadl_torndown *)hdr;
 
+	trace_vmbus_ongpadl_torndown(gpadl_torndown);
+
 	/*
 	 * Find the open msg, copy the result and signal/unblock the wait event
 	 */
@@ -1109,6 +1130,9 @@ static void vmbus_onversion_response(
 	unsigned long flags;
 
 	version_response = (struct vmbus_channel_version_response *)hdr;
+
+	trace_vmbus_onversion_response(version_response);
+
 	spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
 
 	list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
@@ -1168,6 +1192,8 @@ void vmbus_onmessage(void *context)
 	hdr = (struct vmbus_channel_message_header *)msg->u.payload;
 	size = msg->header.payload_size;
 
+	trace_vmbus_on_message(hdr);
+
 	if (hdr->msgtype >= CHANNELMSG_COUNT) {
 		pr_err("Received invalid channel message type %d size %d\n",
 			   hdr->msgtype, size);
@@ -1201,9 +1227,11 @@ int vmbus_request_offers(void)
 
 	msg->msgtype = CHANNELMSG_REQUESTOFFERS;
 
-
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_message_header),
 			     true);
+
+	trace_vmbus_request_offers(ret);
+
 	if (ret != 0) {
 		pr_err("Unable to request offers - %d\n", ret);
 

drivers/hv/connection.c

@@ -117,6 +117,9 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo,
 	ret = vmbus_post_msg(msg,
 			     sizeof(struct vmbus_channel_initiate_contact),
 			     true);
+
+	trace_vmbus_negotiate_version(msg, ret);
+
 	if (ret != 0) {
 		spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
 		list_del(&msginfo->msglistentry);
@@ -319,6 +322,8 @@ void vmbus_on_event(unsigned long data)
 	struct vmbus_channel *channel = (void *) data;
 	unsigned long time_limit = jiffies + 2;
 
+	trace_vmbus_on_event(channel);
+
 	do {
 		void (*callback_fn)(void *);
 
@@ -409,6 +414,8 @@ void vmbus_set_event(struct vmbus_channel *channel)
 	if (!channel->is_dedicated_interrupt)
 		vmbus_send_interrupt(child_relid);
 
+	++channel->sig_events;
+
 	hv_do_fast_hypercall8(HVCALL_SIGNAL_EVENT, channel->sig_event);
 }
 EXPORT_SYMBOL_GPL(vmbus_set_event);

drivers/hv/hv_trace.c

@@ -0,0 +1,4 @@
+#include "hyperv_vmbus.h"
+
+#define CREATE_TRACE_POINTS
+#include "hv_trace.h"

drivers/hv/hv_trace.h

@@ -0,0 +1,327 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hyperv
+
+#if !defined(_HV_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _HV_TRACE_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(vmbus_hdr_msg,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr),
+	TP_STRUCT__entry(__field(unsigned int, msgtype)),
+	TP_fast_assign(__entry->msgtype = hdr->msgtype;),
+	TP_printk("msgtype=%u", __entry->msgtype)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_msg_dpc,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_message,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr)
+);
+
+TRACE_EVENT(vmbus_onoffer,
+	    TP_PROTO(const struct vmbus_channel_offer_channel *offer),
+	    TP_ARGS(offer),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u8, monitorid)
+		    __field(u16, is_ddc_int)
+		    __field(u32, connection_id)
+		    __array(char, if_type, 16)
+		    __array(char, if_instance, 16)
+		    __field(u16, chn_flags)
+		    __field(u16, mmio_mb)
+		    __field(u16, sub_idx)
+		    ),
+	    TP_fast_assign(__entry->child_relid = offer->child_relid;
+			   __entry->monitorid = offer->monitorid;
+			   __entry->is_ddc_int = offer->is_dedicated_interrupt;
+			   __entry->connection_id = offer->connection_id;
+			   memcpy(__entry->if_type,
+				  &offer->offer.if_type.b, 16);
+			   memcpy(__entry->if_instance,
+				  &offer->offer.if_instance.b, 16);
+			   __entry->chn_flags = offer->offer.chn_flags;
+			   __entry->mmio_mb = offer->offer.mmio_megabytes;
+			   __entry->sub_idx = offer->offer.sub_channel_index;
+		    ),
+	    TP_printk("child_relid 0x%x, monitorid 0x%x, is_dedicated %d, "
+		      "connection_id 0x%x, if_type %pUl, if_instance %pUl, "
+		      "chn_flags 0x%x, mmio_megabytes %d, sub_channel_index %d",
+		      __entry->child_relid, __entry->monitorid,
+		      __entry->is_ddc_int, __entry->connection_id,
+		      __entry->if_type, __entry->if_instance,
+		      __entry->chn_flags, __entry->mmio_mb,
+		      __entry->sub_idx
+		    )
+	);
+
+TRACE_EVENT(vmbus_onoffer_rescind,
+	    TP_PROTO(const struct vmbus_channel_rescind_offer *offer),
+	    TP_ARGS(offer),
+	    TP_STRUCT__entry(__field(u32, child_relid)),
+	    TP_fast_assign(__entry->child_relid = offer->child_relid),
+	    TP_printk("child_relid 0x%x", __entry->child_relid)
+	);
+
+TRACE_EVENT(vmbus_onopen_result,
+	    TP_PROTO(const struct vmbus_channel_open_result *result),
+	    TP_ARGS(result),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, openid)
+		    __field(u32, status)
+		    ),
+	    TP_fast_assign(__entry->child_relid = result->child_relid;
+			   __entry->openid = result->openid;
+			   __entry->status = result->status;
+		    ),
+	    TP_printk("child_relid 0x%x, openid %d, status %d",
+		      __entry->child_relid,  __entry->openid,  __entry->status
+		    )
+	);
+
+TRACE_EVENT(vmbus_ongpadl_created,
+	    TP_PROTO(const struct vmbus_channel_gpadl_created *gpadlcreated),
+	    TP_ARGS(gpadlcreated),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(u32, status)
+		    ),
+	    TP_fast_assign(__entry->child_relid = gpadlcreated->child_relid;
+			   __entry->gpadl = gpadlcreated->gpadl;
+			   __entry->status = gpadlcreated->creation_status;
+		    ),
+	    TP_printk("child_relid 0x%x, gpadl 0x%x, creation_status %d",
+		      __entry->child_relid,  __entry->gpadl,  __entry->status
+		    )
+	);
+
+TRACE_EVENT(vmbus_ongpadl_torndown,
+	    TP_PROTO(const struct vmbus_channel_gpadl_torndown *gpadltorndown),
+	    TP_ARGS(gpadltorndown),
+	    TP_STRUCT__entry(__field(u32, gpadl)),
+	    TP_fast_assign(__entry->gpadl = gpadltorndown->gpadl),
+	    TP_printk("gpadl 0x%x", __entry->gpadl)
+	);
+
+TRACE_EVENT(vmbus_onversion_response,
+	    TP_PROTO(const struct vmbus_channel_version_response *response),
+	    TP_ARGS(response),
+	    TP_STRUCT__entry(
+		    __field(u8, ver)
+		    ),
+	    TP_fast_assign(__entry->ver = response->version_supported;
+		    ),
+	    TP_printk("version_supported %d", __entry->ver)
+	);
+
+TRACE_EVENT(vmbus_request_offers,
+	    TP_PROTO(int ret),
+	    TP_ARGS(ret),
+	    TP_STRUCT__entry(__field(int, ret)),
+	    TP_fast_assign(__entry->ret = ret),
+	    TP_printk("sending ret %d", __entry->ret)
+	);
+
+TRACE_EVENT(vmbus_open,
+	    TP_PROTO(const struct vmbus_channel_open_channel *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, openid)
+		    __field(u32, gpadlhandle)
+		    __field(u32, target_vp)
+		    __field(u32, offset)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->openid = msg->openid;
+		    __entry->gpadlhandle = msg->ringbuffer_gpadlhandle;
+		    __entry->target_vp = msg->target_vp;
+		    __entry->offset = msg->downstream_ringbuffer_pageoffset;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, openid %d, "
+		      "gpadlhandle 0x%x, target_vp 0x%x, offset 0x%x, ret %d",
+		      __entry->child_relid,  __entry->openid,
+		      __entry->gpadlhandle, __entry->target_vp,
+		      __entry->offset, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_close_internal,
+	    TP_PROTO(const struct vmbus_channel_close_channel *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, ret %d", __entry->child_relid,
+		    __entry->ret)
+	);
+
+TRACE_EVENT(vmbus_establish_gpadl_header,
+	    TP_PROTO(const struct vmbus_channel_gpadl_header *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(u16, range_buflen)
+		    __field(u16, rangecount)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->range_buflen = msg->range_buflen;
+		    __entry->rangecount = msg->rangecount;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, gpadl 0x%x, range_buflen %d "
+		      "rangecount %d, ret %d",
+		      __entry->child_relid, __entry->gpadl,
+		      __entry->range_buflen, __entry->rangecount, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_establish_gpadl_body,
+	    TP_PROTO(const struct vmbus_channel_gpadl_body *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, msgnumber)
+		    __field(u32, gpadl)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->msgnumber = msg->msgnumber;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending msgnumber %d, gpadl 0x%x, ret %d",
+		      __entry->msgnumber, __entry->gpadl, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_teardown_gpadl,
+	    TP_PROTO(const struct vmbus_channel_gpadl_teardown *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, gpadl 0x%x, ret %d",
+		      __entry->child_relid, __entry->gpadl, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_negotiate_version,
+	    TP_PROTO(const struct vmbus_channel_initiate_contact *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, ver)
+		    __field(u32, target_vcpu)
+		    __field(int, ret)
+		    __field(u64, int_page)
+		    __field(u64, mon_page1)
+		    __field(u64, mon_page2)
+		    ),
+	    TP_fast_assign(
+		    __entry->ver = msg->vmbus_version_requested;
+		    __entry->target_vcpu = msg->target_vcpu;
+		    __entry->int_page = msg->interrupt_page;
+		    __entry->mon_page1 = msg->monitor_page1;
+		    __entry->mon_page2 = msg->monitor_page2;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending vmbus_version_requested %d, target_vcpu 0x%x, "
+		      "pages %llx:%llx:%llx, ret %d",
+		      __entry->ver, __entry->target_vcpu, __entry->int_page,
+		      __entry->mon_page1, __entry->mon_page2, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_release_relid,
+	    TP_PROTO(const struct vmbus_channel_relid_released *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, ret %d",
+		      __entry->child_relid, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_send_tl_connect_request,
+	    TP_PROTO(const struct vmbus_channel_tl_connect_request *msg,
+		     int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __array(char, guest_id, 16)
+		    __array(char, host_id, 16)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
+		    memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
+		      "ret %d",
+		      __entry->guest_id, __entry->host_id, __entry->ret
+		    )
+	);
+
+DECLARE_EVENT_CLASS(vmbus_channel,
+	TP_PROTO(const struct vmbus_channel *channel),
+	TP_ARGS(channel),
+	TP_STRUCT__entry(__field(u32, relid)),
+	TP_fast_assign(__entry->relid = channel->offermsg.child_relid),
+	TP_printk("relid 0x%x", __entry->relid)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_chan_sched,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_setevent,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_on_event,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE hv_trace
+#endif /* _HV_TRACE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>

drivers/hv/hyperv_vmbus.h

@@ -31,6 +31,8 @@
 #include <linux/hyperv.h>
 #include <linux/interrupt.h>
 
+#include "hv_trace.h"
+
 /*
  * Timeout for services such as KVP and fcopy.
  */
@@ -373,6 +375,8 @@ struct hv_device *vmbus_device_create(const uuid_le *type,
 
 int vmbus_device_register(struct hv_device *child_device_obj);
 void vmbus_device_unregister(struct hv_device *device_obj);
+int vmbus_add_channel_kobj(struct hv_device *device_obj,
+			   struct vmbus_channel *channel);
 
 struct vmbus_channel *relid2channel(u32 relid);
 

drivers/hv/vmbus_drv.c

@@ -65,7 +65,7 @@ static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,
 
 	regs = current_pt_regs();
 
-	hyperv_report_panic(regs);
+	hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }
 
@@ -75,7 +75,7 @@ static int hyperv_die_event(struct notifier_block *nb, unsigned long val,
 	struct die_args *die = (struct die_args *)args;
 	struct pt_regs *regs = die->regs;
 
-	hyperv_report_panic(regs);
+	hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }
 
@@ -107,28 +107,30 @@ static void print_alias_name(struct hv_device *hv_dev, char *alias_name)
 		sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]);
 }
 
-static u8 channel_monitor_group(struct vmbus_channel *channel)
+static u8 channel_monitor_group(const struct vmbus_channel *channel)
 {
 	return (u8)channel->offermsg.monitorid / 32;
 }
 
-static u8 channel_monitor_offset(struct vmbus_channel *channel)
+static u8 channel_monitor_offset(const struct vmbus_channel *channel)
 {
 	return (u8)channel->offermsg.monitorid % 32;
 }
 
-static u32 channel_pending(struct vmbus_channel *channel,
-			   struct hv_monitor_page *monitor_page)
+static u32 channel_pending(const struct vmbus_channel *channel,
+			   const struct hv_monitor_page *monitor_page)
 {
 	u8 monitor_group = channel_monitor_group(channel);
+
 	return monitor_page->trigger_group[monitor_group].pending;
 }
 
-static u32 channel_latency(struct vmbus_channel *channel,
-			   struct hv_monitor_page *monitor_page)
+static u32 channel_latency(const struct vmbus_channel *channel,
+			   const struct hv_monitor_page *monitor_page)
 {
 	u8 monitor_group = channel_monitor_group(channel);
 	u8 monitor_offset = channel_monitor_offset(channel);
+
 	return monitor_page->latency[monitor_group][monitor_offset];
 }
 
@@ -833,6 +835,8 @@ void vmbus_on_msg_dpc(unsigned long data)
 
 	hdr = (struct vmbus_channel_message_header *)msg->u.payload;
 
+	trace_vmbus_on_msg_dpc(hdr);
+
 	if (hdr->msgtype >= CHANNELMSG_COUNT) {
 		WARN_ONCE(1, "unknown msgtype=%d\n", hdr->msgtype);
 		goto msg_handled;
@@ -942,6 +946,10 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
 			if (channel->rescind)
 				continue;
 
+			trace_vmbus_chan_sched(channel);
+
+			++channel->interrupts;
+
 			switch (channel->callback_mode) {
 			case HV_CALL_ISR:
 				vmbus_channel_isr(channel);
@@ -1133,6 +1141,159 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver)
 }
 EXPORT_SYMBOL_GPL(vmbus_driver_unregister);
 
+
+/*
+ * Called when last reference to channel is gone.
+ */
+static void vmbus_chan_release(struct kobject *kobj)
+{
+	struct vmbus_channel *channel
+		= container_of(kobj, struct vmbus_channel, kobj);
+
+	kfree_rcu(channel, rcu);
+}
+
+struct vmbus_chan_attribute {
+	struct attribute attr;
+	ssize_t (*show)(const struct vmbus_channel *chan, char *buf);
+	ssize_t (*store)(struct vmbus_channel *chan,
+			 const char *buf, size_t count);
+};
+#define VMBUS_CHAN_ATTR(_name, _mode, _show, _store) \
+	struct vmbus_chan_attribute chan_attr_##_name \
+		= __ATTR(_name, _mode, _show, _store)
+#define VMBUS_CHAN_ATTR_RW(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RW(_name)
+#define VMBUS_CHAN_ATTR_RO(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RO(_name)
+#define VMBUS_CHAN_ATTR_WO(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_WO(_name)
+
+static ssize_t vmbus_chan_attr_show(struct kobject *kobj,
+				    struct attribute *attr, char *buf)
+{
+	const struct vmbus_chan_attribute *attribute
+		= container_of(attr, struct vmbus_chan_attribute, attr);
+	const struct vmbus_channel *chan
+		= container_of(kobj, struct vmbus_channel, kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(chan, buf);
+}
+
+static const struct sysfs_ops vmbus_chan_sysfs_ops = {
+	.show = vmbus_chan_attr_show,
+};
+
+static ssize_t out_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+	return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(out_mask);
+
+static ssize_t in_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+	return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(in_mask);
+
+static ssize_t read_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+	return sprintf(buf, "%u\n", hv_get_bytes_to_read(rbi));
+}
+VMBUS_CHAN_ATTR_RO(read_avail);
+
+static ssize_t write_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+	return sprintf(buf, "%u\n", hv_get_bytes_to_write(rbi));
+}
+VMBUS_CHAN_ATTR_RO(write_avail);
+
+static ssize_t show_target_cpu(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%u\n", channel->target_cpu);
+}
+VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL);
+
+static ssize_t channel_pending_show(const struct vmbus_channel *channel,
+				    char *buf)
+{
+	return sprintf(buf, "%d\n",
+		       channel_pending(channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL);
+
+static ssize_t channel_latency_show(const struct vmbus_channel *channel,
+				    char *buf)
+{
+	return sprintf(buf, "%d\n",
+		       channel_latency(channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL);
+
+static ssize_t channel_interrupts_show(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%llu\n", channel->interrupts);
+}
+VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL);
+
+static ssize_t channel_events_show(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%llu\n", channel->sig_events);
+}
+VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL);
+
+static struct attribute *vmbus_chan_attrs[] = {
+	&chan_attr_out_mask.attr,
+	&chan_attr_in_mask.attr,
+	&chan_attr_read_avail.attr,
+	&chan_attr_write_avail.attr,
+	&chan_attr_cpu.attr,
+	&chan_attr_pending.attr,
+	&chan_attr_latency.attr,
+	&chan_attr_interrupts.attr,
+	&chan_attr_events.attr,
+	NULL
+};
+
+static struct kobj_type vmbus_chan_ktype = {
+	.sysfs_ops = &vmbus_chan_sysfs_ops,
+	.release = vmbus_chan_release,
+	.default_attrs = vmbus_chan_attrs,
+};
+
+/*
+ * vmbus_add_channel_kobj - setup a sub-directory under device/channels
+ */
+int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
+{
+	struct kobject *kobj = &channel->kobj;
+	u32 relid = channel->offermsg.child_relid;
+	int ret;
+
+	kobj->kset = dev->channels_kset;
+	ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL,
+				   "%u", relid);
+	if (ret)
+		return ret;
+
+	kobject_uevent(kobj, KOBJ_ADD);
+
+	return 0;
+}
+
 /*
  * vmbus_device_create - Creates and registers a new child device
  * on the vmbus.
@@ -1164,7 +1325,8 @@ struct hv_device *vmbus_device_create(const uuid_le *type,
  */
 int vmbus_device_register(struct hv_device *child_device_obj)
 {
-	int ret = 0;
+	struct kobject *kobj = &child_device_obj->device.kobj;
+	int ret;
 
 	dev_set_name(&child_device_obj->device, "%pUl",
 		     child_device_obj->channel->offermsg.offer.if_instance.b);
@@ -1178,13 +1340,32 @@ int vmbus_device_register(struct hv_device *child_device_obj)
 	 * binding...which will eventually call vmbus_match() and vmbus_probe()
 	 */
 	ret = device_register(&child_device_obj->device);
-
-	if (ret)
+	if (ret) {
 		pr_err("Unable to register child device\n");
-	else
-		pr_debug("child device %s registered\n",
-			dev_name(&child_device_obj->device));
+		return ret;
+	}
+
+	child_device_obj->channels_kset = kset_create_and_add("channels",
+							      NULL, kobj);
+	if (!child_device_obj->channels_kset) {
+		ret = -ENOMEM;
+		goto err_dev_unregister;
+	}
+
+	ret = vmbus_add_channel_kobj(child_device_obj,
+				     child_device_obj->channel);
+	if (ret) {
+		pr_err("Unable to register primary channeln");
+		goto err_kset_unregister;
+	}
+
+	return 0;
+
+err_kset_unregister:
+	kset_unregister(child_device_obj->channels_kset);
 
+err_dev_unregister:
+	device_unregister(&child_device_obj->device);
 	return ret;
 }
 

drivers/hwtracing/coresight/coresight-dynamic-replicator.c

@@ -199,8 +199,8 @@ static const struct dev_pm_ops replicator_dev_pm_ops = {
 
 static const struct amba_id replicator_ids[] = {
 	{
-		.id     = 0x0003b909,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb909,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC-600 */

drivers/hwtracing/coresight/coresight-etb10.c

@@ -748,8 +748,8 @@ static const struct dev_pm_ops etb_dev_pm_ops = {
 
 static const struct amba_id etb_ids[] = {
 	{
-		.id	= 0x0003b907,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb907,
+		.mask	= 0x000fffff,
 	},
 	{ 0, 0},
 };

drivers/hwtracing/coresight/coresight-etm3x.c

@@ -901,33 +901,33 @@ static const struct dev_pm_ops etm_dev_pm_ops = {
 
 static const struct amba_id etm_ids[] = {
 	{	/* ETM 3.3 */
-		.id	= 0x0003b921,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb921,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.3",
 	},
 	{	/* ETM 3.5 - Cortex-A5 */
-		.id	= 0x0003b955,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb955,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.5",
 	},
 	{	/* ETM 3.5 */
-		.id	= 0x0003b956,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb956,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.5",
 	},
 	{	/* PTM 1.0 */
-		.id	= 0x0003b950,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb950,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.0",
 	},
 	{	/* PTM 1.1 */
-		.id	= 0x0003b95f,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb95f,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.1",
 	},
 	{	/* PTM 1.1 Qualcomm */
-		.id	= 0x0003006f,
-		.mask	= 0x0003ffff,
+		.id	= 0x000b006f,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.1",
 	},
 	{ 0, 0},

drivers/hwtracing/coresight/coresight-funnel.c

@@ -248,8 +248,8 @@ static const struct dev_pm_ops funnel_dev_pm_ops = {
 
 static const struct amba_id funnel_ids[] = {
 	{
-		.id     = 0x0003b908,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb908,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC-600 */

drivers/hwtracing/coresight/coresight-stm.c

@@ -917,13 +917,13 @@ static const struct dev_pm_ops stm_dev_pm_ops = {
 
 static const struct amba_id stm_ids[] = {
 	{
-		.id     = 0x0003b962,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb962,
+		.mask   = 0x000fffff,
 		.data	= "STM32",
 	},
 	{
-		.id	= 0x0003b963,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb963,
+		.mask	= 0x000fffff,
 		.data	= "STM500",
 	},
 	{ 0, 0},

drivers/hwtracing/coresight/coresight-tmc.c

@@ -439,8 +439,8 @@ out:
 
 static const struct amba_id tmc_ids[] = {
 	{
-		.id     = 0x0003b961,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb961,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC 600 TMC-ETR/ETS */

drivers/hwtracing/coresight/coresight-tpiu.c

@@ -194,8 +194,8 @@ static const struct dev_pm_ops tpiu_dev_pm_ops = {
 
 static const struct amba_id tpiu_ids[] = {
 	{
-		.id	= 0x0003b912,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb912,
+		.mask	= 0x000fffff,
 	},
 	{
 		.id	= 0x0004b912,

drivers/misc/altera-stapl/Kconfig

@@ -1,4 +1,5 @@
-comment "Altera FPGA firmware download module"
+comment "Altera FPGA firmware download module (requires I2C)"
+	depends on !I2C
 
 config ALTERA_STAPL
 	tristate "Altera FPGA firmware download module"

drivers/misc/genwqe/card_base.h

@@ -182,6 +182,7 @@ struct dma_mapping {
 
 	struct list_head card_list;	/* list of usr_maps for card */
 	struct list_head pin_list;	/* list of pinned memory for dev */
+	int write;			/* writable map? useful in unmapping */
 };
 
 static inline void genwqe_mapping_init(struct dma_mapping *m,
@@ -189,6 +190,7 @@ static inline void genwqe_mapping_init(struct dma_mapping *m,
 {
 	memset(m, 0, sizeof(*m));
 	m->type = type;
+	m->write = 1; /* Assume the maps we create are R/W */
 }
 
 /**
@@ -347,6 +349,7 @@ enum genwqe_requ_state {
  * @user_size:      size of user-space memory area
  * @page:           buffer for partial pages if needed
  * @page_dma_addr:  dma address partial pages
+ * @write:          should we write it back to userspace?
  */
 struct genwqe_sgl {
 	dma_addr_t sgl_dma_addr;
@@ -356,6 +359,8 @@ struct genwqe_sgl {
 	void __user *user_addr; /* user-space base-address */
 	size_t user_size;       /* size of memory area */
 
+	int write;
+
 	unsigned long nr_pages;
 	unsigned long fpage_offs;
 	size_t fpage_size;
@@ -369,7 +374,7 @@ struct genwqe_sgl {
 };
 
 int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
-			  void __user *user_addr, size_t user_size);
+			  void __user *user_addr, size_t user_size, int write);
 
 int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 		     dma_addr_t *dma_list);

drivers/misc/genwqe/card_dev.c

@@ -942,6 +942,10 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
 
 				genwqe_mapping_init(m,
 						    GENWQE_MAPPING_SGL_TEMP);
+
+				if (ats_flags == ATS_TYPE_SGL_RD)
+					m->write = 0;
+
 				rc = genwqe_user_vmap(cd, m, (void *)u_addr,
 						      u_size, req);
 				if (rc != 0)
@@ -954,7 +958,7 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
 			/* create genwqe style scatter gather list */
 			rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i],
 						   (void __user *)u_addr,
-						   u_size);
+						   u_size, m->write);
 			if (rc != 0)
 				goto err_out;
 

drivers/misc/genwqe/card_utils.c

@@ -296,7 +296,7 @@ static int genwqe_sgl_size(int num_pages)
  * from user-space into the cached pages.
  */
 int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
-			  void __user *user_addr, size_t user_size)
+			  void __user *user_addr, size_t user_size, int write)
 {
 	int rc;
 	struct pci_dev *pci_dev = cd->pci_dev;
@@ -312,6 +312,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 
 	sgl->user_addr = user_addr;
 	sgl->user_size = user_size;
+	sgl->write = write;
 	sgl->sgl_size = genwqe_sgl_size(sgl->nr_pages);
 
 	if (get_order(sgl->sgl_size) > MAX_ORDER) {
@@ -476,14 +477,20 @@ int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
 {
 	int rc = 0;
+	size_t offset;
+	unsigned long res;
 	struct pci_dev *pci_dev = cd->pci_dev;
 
 	if (sgl->fpage) {
-		if (copy_to_user(sgl->user_addr, sgl->fpage + sgl->fpage_offs,
-				 sgl->fpage_size)) {
-			dev_err(&pci_dev->dev, "[%s] err: copying fpage!\n",
-				__func__);
-			rc = -EFAULT;
+		if (sgl->write) {
+			res = copy_to_user(sgl->user_addr,
+				sgl->fpage + sgl->fpage_offs, sgl->fpage_size);
+			if (res) {
+				dev_err(&pci_dev->dev,
+					"[%s] err: copying fpage! (res=%lu)\n",
+					__func__, res);
+				rc = -EFAULT;
+			}
 		}
 		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage,
 					 sgl->fpage_dma_addr);
@@ -491,12 +498,16 @@ int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
 		sgl->fpage_dma_addr = 0;
 	}
 	if (sgl->lpage) {
-		if (copy_to_user(sgl->user_addr + sgl->user_size -
-				 sgl->lpage_size, sgl->lpage,
-				 sgl->lpage_size)) {
-			dev_err(&pci_dev->dev, "[%s] err: copying lpage!\n",
-				__func__);
-			rc = -EFAULT;
+		if (sgl->write) {
+			offset = sgl->user_size - sgl->lpage_size;
+			res = copy_to_user(sgl->user_addr + offset, sgl->lpage,
+					   sgl->lpage_size);
+			if (res) {
+				dev_err(&pci_dev->dev,
+					"[%s] err: copying lpage! (res=%lu)\n",
+					__func__, res);
+				rc = -EFAULT;
+			}
 		}
 		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage,
 					 sgl->lpage_dma_addr);
@@ -599,14 +610,14 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
 	/* pin user pages in memory */
 	rc = get_user_pages_fast(data & PAGE_MASK, /* page aligned addr */
 				 m->nr_pages,
-				 1,		/* write by caller */
+				 m->write,		/* readable/writable */
 				 m->page_list);	/* ptrs to pages */
 	if (rc < 0)
 		goto fail_get_user_pages;
 
 	/* assumption: get_user_pages can be killed by signals. */
 	if (rc < m->nr_pages) {
-		free_user_pages(m->page_list, rc, 0);
+		free_user_pages(m->page_list, rc, m->write);
 		rc = -EFAULT;
 		goto fail_get_user_pages;
 	}
@@ -618,7 +629,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
 	return 0;
 
  fail_free_user_pages:
-	free_user_pages(m->page_list, m->nr_pages, 0);
+	free_user_pages(m->page_list, m->nr_pages, m->write);
 
  fail_get_user_pages:
 	kfree(m->page_list);
@@ -651,7 +662,7 @@ int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m,
 		genwqe_unmap_pages(cd, m->dma_list, m->nr_pages);
 
 	if (m->page_list) {
-		free_user_pages(m->page_list, m->nr_pages, 1);
+		free_user_pages(m->page_list, m->nr_pages, m->write);
 
 		kfree(m->page_list);
 		m->page_list = NULL;

drivers/misc/lkdtm_core.c

@@ -122,7 +122,7 @@ struct crashtype {
 	}
 
 /* Define the possible types of crashes that can be triggered. */
-struct crashtype crashtypes[] = {
+static const struct crashtype crashtypes[] = {
 	CRASHTYPE(PANIC),
 	CRASHTYPE(BUG),
 	CRASHTYPE(WARNING),
@@ -188,8 +188,8 @@ struct crashtype crashtypes[] = {
 
 /* Global kprobe entry and crashtype. */
 static struct kprobe *lkdtm_kprobe;
-struct crashpoint *lkdtm_crashpoint;
-struct crashtype *lkdtm_crashtype;
+static struct crashpoint *lkdtm_crashpoint;
+static const struct crashtype *lkdtm_crashtype;
 
 /* Module parameters */
 static int recur_count = -1;
@@ -212,7 +212,7 @@ MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\
 
 
 /* Return the crashtype number or NULL if the name is invalid */
-static struct crashtype *find_crashtype(const char *name)
+static const struct crashtype *find_crashtype(const char *name)
 {
 	int i;
 
@@ -228,7 +228,7 @@ static struct crashtype *find_crashtype(const char *name)
  * This is forced noinline just so it distinctly shows up in the stackdump
  * which makes validation of expected lkdtm crashes easier.
  */
-static noinline void lkdtm_do_action(struct crashtype *crashtype)
+static noinline void lkdtm_do_action(const struct crashtype *crashtype)
 {
 	if (WARN_ON(!crashtype || !crashtype->func))
 		return;
@@ -236,7 +236,7 @@ static noinline void lkdtm_do_action(struct crashtype *crashtype)
 }
 
 static int lkdtm_register_cpoint(struct crashpoint *crashpoint,
-				 struct crashtype *crashtype)
+				 const struct crashtype *crashtype)
 {
 	int ret;
 
@@ -300,7 +300,7 @@ static ssize_t lkdtm_debugfs_entry(struct file *f,
 				   size_t count, loff_t *off)
 {
 	struct crashpoint *crashpoint = file_inode(f)->i_private;
-	struct crashtype *crashtype = NULL;
+	const struct crashtype *crashtype = NULL;
 	char *buf;
 	int err;
 
@@ -368,7 +368,7 @@ static int lkdtm_debugfs_open(struct inode *inode, struct file *file)
 static ssize_t direct_entry(struct file *f, const char __user *user_buf,
 		size_t count, loff_t *off)
 {
-	struct crashtype *crashtype;
+	const struct crashtype *crashtype;
 	char *buf;
 
 	if (count >= PAGE_SIZE)
@@ -404,7 +404,7 @@ static struct dentry *lkdtm_debugfs_root;
 static int __init lkdtm_module_init(void)
 {
 	struct crashpoint *crashpoint = NULL;
-	struct crashtype *crashtype = NULL;
+	const struct crashtype *crashtype = NULL;
 	int ret = -EINVAL;
 	int i;
 

drivers/misc/mei/mei-trace.c

@@ -23,5 +23,4 @@
 EXPORT_TRACEPOINT_SYMBOL(mei_reg_read);
 EXPORT_TRACEPOINT_SYMBOL(mei_reg_write);
 EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read);
-EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_write);
 #endif /* __CHECKER__ */

drivers/misc/mei/mei-trace.h

@@ -83,25 +83,6 @@ TRACE_EVENT(mei_pci_cfg_read,
 		  __get_str(dev), __entry->reg, __entry->offs, __entry->val)
 );
 
-TRACE_EVENT(mei_pci_cfg_write,
-	TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
-	TP_ARGS(dev, reg, offs, val),
-	TP_STRUCT__entry(
-		__string(dev, dev_name(dev))
-		__field(const char *, reg)
-		__field(u32, offs)
-		__field(u32, val)
-	),
-	TP_fast_assign(
-		__assign_str(dev, dev_name(dev))
-		__entry->reg = reg;
-		__entry->offs = offs;
-		__entry->val = val;
-	),
-	TP_printk("[%s] pci cfg write %s[%#x] = %#x",
-		  __get_str(dev), __entry->reg,  __entry->offs, __entry->val)
-);
-
 #endif /* _MEI_TRACE_H_ */
 
 /* This part must be outside protection */

drivers/misc/mic/Kconfig

@@ -1,3 +1,5 @@
+menu "Intel MIC & related support"
+
 comment "Intel MIC Bus Driver"
 
 config INTEL_MIC_BUS
@@ -150,3 +152,5 @@ config VOP
 if VOP
 source "drivers/vhost/Kconfig.vringh"
 endif
+
+endmenu

drivers/nvmem/Kconfig

@@ -123,6 +123,17 @@ config NVMEM_SUNXI_SID
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_sunxi_sid.
 
+config UNIPHIER_EFUSE
+	tristate "UniPhier SoCs eFuse support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of UniPhier SoC
+	  from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-uniphier-efuse.
+
 config NVMEM_VF610_OCOTP
 	tristate "VF610 SoC OCOTP support"
 	depends on SOC_VF610 || COMPILE_TEST
@@ -135,13 +146,33 @@ config NVMEM_VF610_OCOTP
 	  be called nvmem-vf610-ocotp.
 
 config MESON_EFUSE
-	tristate "Amlogic eFuse Support"
+	tristate "Amlogic Meson GX eFuse Support"
 	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
 	help
 	  This is a driver to retrieve specific values from the eFuse found on
-	  the Amlogic Meson SoCs.
+	  the Amlogic Meson GX SoCs.
 
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_meson_efuse.
 
+config MESON_MX_EFUSE
+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_mx_efuse.
+
+config NVMEM_SNVS_LPGPR
+	tristate "Support for Low Power General Purpose Register"
+	depends on SOC_IMX6 || COMPILE_TEST
+	help
+	  This is a driver for Low Power General Purpose Register (LPGPR) available on
+	  i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-snvs-lpgpr.
+
 endif

drivers/nvmem/Makefile

@@ -27,7 +27,13 @@ obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
 nvmem_rockchip_efuse-y		:= rockchip-efuse.o
 obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
 nvmem_sunxi_sid-y		:= sunxi_sid.o
+obj-$(CONFIG_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y		:= uniphier-efuse.o
 obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
 nvmem-vf610-ocotp-y		:= vf610-ocotp.o
 obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
 nvmem_meson_efuse-y		:= meson-efuse.o
+obj-$(CONFIG_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y		:= meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR)	+= nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y		:= snvs_lpgpr.o

drivers/nvmem/bcm-ocotp.c

@@ -232,7 +232,6 @@ static struct nvmem_config bcm_otpc_nvmem_config = {
 	.read_only = false,
 	.word_size = 4,
 	.stride = 4,
-	.owner = THIS_MODULE,
 	.reg_read = bcm_otpc_read,
 	.reg_write = bcm_otpc_write,
 };

drivers/nvmem/core.c

@@ -462,6 +462,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
 
 	nvmem->id = rval;
 	nvmem->owner = config->owner;
+	if (!nvmem->owner && config->dev->driver)
+		nvmem->owner = config->dev->driver->owner;
 	nvmem->stride = config->stride;
 	nvmem->word_size = config->word_size;
 	nvmem->size = config->size;
@@ -615,7 +617,7 @@ static struct nvmem_device *nvmem_find(const char *name)
 	return to_nvmem_device(d);
 }
 
-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
 /**
  * of_nvmem_device_get() - Get nvmem device from a given id
  *
@@ -753,7 +755,7 @@ static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id)
 	return cell;
 }
 
-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
 /**
  * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
  *
@@ -946,8 +948,7 @@ void nvmem_cell_put(struct nvmem_cell *cell)
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_put);
 
-static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell,
-						    void *buf)
+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf)
 {
 	u8 *p, *b;
 	int i, bit_offset = cell->bit_offset;
@@ -1028,8 +1029,8 @@ void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_read);
 
-static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
-						    u8 *_buf, int len)
+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
+					     u8 *_buf, int len)
 {
 	struct nvmem_device *nvmem = cell->nvmem;
 	int i, rc, nbits, bit_offset = cell->bit_offset;

drivers/nvmem/imx-iim.c

@@ -34,7 +34,6 @@ struct imx_iim_drvdata {
 struct iim_priv {
 	void __iomem *base;
 	struct clk *clk;
-	struct nvmem_config nvmem;
 };
 
 static int imx_iim_read(void *context, unsigned int offset,
@@ -108,7 +107,7 @@ static int imx_iim_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct iim_priv *iim;
 	struct nvmem_device *nvmem;
-	struct nvmem_config *cfg;
+	struct nvmem_config cfg = {};
 	const struct imx_iim_drvdata *drvdata = NULL;
 
 	iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
@@ -130,19 +129,16 @@ static int imx_iim_probe(struct platform_device *pdev)
 	if (IS_ERR(iim->clk))
 		return PTR_ERR(iim->clk);
 
-	cfg = &iim->nvmem;
+	cfg.name = "imx-iim",
+	cfg.read_only = true,
+	cfg.word_size = 1,
+	cfg.stride = 1,
+	cfg.reg_read = imx_iim_read,
+	cfg.dev = dev;
+	cfg.size = drvdata->nregs;
+	cfg.priv = iim;
 
-	cfg->name = "imx-iim",
-	cfg->read_only = true,
-	cfg->word_size = 1,
-	cfg->stride = 1,
-	cfg->owner = THIS_MODULE,
-	cfg->reg_read = imx_iim_read,
-	cfg->dev = dev;
-	cfg->size = drvdata->nregs;
-	cfg->priv = iim;
-
-	nvmem = nvmem_register(cfg);
+	nvmem = nvmem_register(&cfg);
 	if (IS_ERR(nvmem))
 		return PTR_ERR(nvmem);
 

drivers/nvmem/imx-ocotp.c

@@ -40,14 +40,19 @@
 #define IMX_OCOTP_ADDR_CTRL_SET		0x0004
 #define IMX_OCOTP_ADDR_CTRL_CLR		0x0008
 #define IMX_OCOTP_ADDR_TIMING		0x0010
-#define IMX_OCOTP_ADDR_DATA		0x0020
+#define IMX_OCOTP_ADDR_DATA0		0x0020
+#define IMX_OCOTP_ADDR_DATA1		0x0030
+#define IMX_OCOTP_ADDR_DATA2		0x0040
+#define IMX_OCOTP_ADDR_DATA3		0x0050
 
 #define IMX_OCOTP_BM_CTRL_ADDR		0x0000007F
 #define IMX_OCOTP_BM_CTRL_BUSY		0x00000100
 #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
 #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
 
-#define DEF_RELAX			20 /* > 16.5ns */
+#define DEF_RELAX			20	/* > 16.5ns */
+#define DEF_FSOURCE			1001	/* > 1000 ns */
+#define DEF_STROBE_PROG			10000	/* IPG clocks */
 #define IMX_OCOTP_WR_UNLOCK		0x3E770000
 #define IMX_OCOTP_READ_LOCKED_VAL	0xBADABADA
 
@@ -57,10 +62,16 @@ struct ocotp_priv {
 	struct device *dev;
 	struct clk *clk;
 	void __iomem *base;
-	unsigned int nregs;
+	const struct ocotp_params *params;
 	struct nvmem_config *config;
 };
 
+struct ocotp_params {
+	unsigned int nregs;
+	unsigned int bank_address_words;
+	void (*set_timing)(struct ocotp_priv *priv);
+};
+
 static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
 {
 	int count;
@@ -121,8 +132,8 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 	index = offset >> 2;
 	count = bytes >> 2;
 
-	if (count > (priv->nregs - index))
-		count = priv->nregs - index;
+	if (count > (priv->params->nregs - index))
+		count = priv->params->nregs - index;
 
 	mutex_lock(&ocotp_mutex);
 
@@ -160,6 +171,52 @@ read_end:
 	return ret;
 }
 
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate = 0;
+	unsigned long strobe_read, relax, strobe_prog;
+	u32 timing = 0;
+
+	/* 47.3.1.3.1
+	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
+	 * fields with timing values to match the current frequency of the
+	 * ipg_clk. OTP writes will work at maximum bus frequencies as long
+	 * as the HW_OCOTP_TIMING parameters are set correctly.
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+
+	relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
+	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
+	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
+
+	timing = strobe_prog & 0x00000FFF;
+	timing |= (relax       << 12) & 0x0000F000;
+	timing |= (strobe_read << 16) & 0x003F0000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate = 0;
+	u64 fsource, strobe_prog;
+	u32 timing = 0;
+
+	/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+	 * 6.4.3.3
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+	fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+				   NSEC_PER_SEC) + 1;
+	strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+					    NSEC_PER_SEC) + 1;
+
+	timing = strobe_prog & 0x00000FFF;
+	timing |= (fsource << 12) & 0x000FF000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
 static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 			   size_t bytes)
 {
@@ -167,11 +224,9 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	u32 *buf = val;
 	int ret;
 
-	unsigned long clk_rate = 0;
-	unsigned long strobe_read, relax, strobe_prog;
-	u32 timing = 0;
 	u32 ctrl;
 	u8 waddr;
+	u8 word = 0;
 
 	/* allow only writing one complete OTP word at a time */
 	if ((bytes != priv->config->word_size) ||
@@ -187,23 +242,8 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 		return ret;
 	}
 
-	/* 47.3.1.3.1
-	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
-	 * fields with timing values to match the current frequency of the
-	 * ipg_clk. OTP writes will work at maximum bus frequencies as long
-	 * as the HW_OCOTP_TIMING parameters are set correctly.
-	 */
-	clk_rate = clk_get_rate(priv->clk);
-
-	relax = clk_rate / (1000000000 / DEF_RELAX) - 1;
-	strobe_prog = clk_rate / (1000000000 / 10000) + 2 * (DEF_RELAX + 1) - 1;
-	strobe_read = clk_rate / (1000000000 / 40) + 2 * (DEF_RELAX + 1) - 1;
-
-	timing = strobe_prog & 0x00000FFF;
-	timing |= (relax       << 12) & 0x0000F000;
-	timing |= (strobe_read << 16) & 0x003F0000;
-
-	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+	/* Setup the write timing values */
+	priv->params->set_timing(priv);
 
 	/* 47.3.1.3.2
 	 * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
@@ -224,8 +264,23 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * description. Both the unlock code and address can be written in the
 	 * same operation.
 	 */
-	/* OTP write/read address specifies one of 128 word address locations */
-	waddr = offset / 4;
+	if (priv->params->bank_address_words != 0) {
+		/*
+		 * In banked/i.MX7 mode the OTP register bank goes into waddr
+		 * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+		 * 0.1 section 6.4.3.1
+		 */
+		offset = offset / priv->config->word_size;
+		waddr = offset / priv->params->bank_address_words;
+		word  = offset & (priv->params->bank_address_words - 1);
+	} else {
+		/*
+		 * Non-banked i.MX6 mode.
+		 * OTP write/read address specifies one of 128 word address
+		 * locations
+		 */
+		waddr = offset / 4;
+	}
 
 	ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
 	ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
@@ -251,8 +306,43 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * shift right (with zero fill). This shifting is required to program
 	 * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
 	 * modified.
+	 * Note: on i.MX7 there are four data fields to write for banked write
+	 *       with the fuse blowing operation only taking place after data0
+	 *	 has been written. This is why data0 must always be the last
+	 *	 register written.
 	 */
-	writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA);
+	if (priv->params->bank_address_words != 0) {
+		/* Banked/i.MX7 mode */
+		switch (word) {
+		case 0:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 1:
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 2:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 3:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		}
+	} else {
+		/* Non-banked i.MX6 mode */
+		writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+	}
 
 	/* 47.4.1.4.5
 	 * Once complete, the controller will clear BUSY. A write request to a
@@ -303,17 +393,46 @@ static struct nvmem_config imx_ocotp_nvmem_config = {
 	.read_only = false,
 	.word_size = 4,
 	.stride = 4,
-	.owner = THIS_MODULE,
 	.reg_read = imx_ocotp_read,
 	.reg_write = imx_ocotp_write,
 };
 
+static const struct ocotp_params imx6q_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sl_params = {
+	.nregs = 64,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sx_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6ul_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx7d_params = {
+	.nregs = 64,
+	.bank_address_words = 4,
+	.set_timing = imx_ocotp_set_imx7_timing,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
-	{ .compatible = "fsl,imx6q-ocotp",  (void *)128 },
-	{ .compatible = "fsl,imx6sl-ocotp", (void *)64 },
-	{ .compatible = "fsl,imx6sx-ocotp", (void *)128 },
-	{ .compatible = "fsl,imx6ul-ocotp", (void *)128 },
-	{ .compatible = "fsl,imx7d-ocotp", (void *)64 },
+	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
+	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+	{ .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+	{ .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+	{ .compatible = "fsl,imx7d-ocotp",  .data = &imx7d_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
@@ -342,8 +461,8 @@ static int imx_ocotp_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 
 	of_id = of_match_device(imx_ocotp_dt_ids, dev);
-	priv->nregs = (unsigned long)of_id->data;
-	imx_ocotp_nvmem_config.size = 4 * priv->nregs;
+	priv->params = of_device_get_match_data(&pdev->dev);
+	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
 	imx_ocotp_nvmem_config.dev = dev;
 	imx_ocotp_nvmem_config.priv = priv;
 	priv->config = &imx_ocotp_nvmem_config;
@@ -375,5 +494,5 @@ static struct platform_driver imx_ocotp_driver = {
 module_platform_driver(imx_ocotp_driver);
 
 MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
-MODULE_DESCRIPTION("i.MX6 OCOTP fuse box driver");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
 MODULE_LICENSE("GPL v2");

drivers/nvmem/lpc18xx_eeprom.c

@@ -159,7 +159,6 @@ static struct nvmem_config lpc18xx_nvmem_config = {
 	.word_size = 4,
 	.reg_read = lpc18xx_eeprom_read,
 	.reg_write = lpc18xx_eeprom_gather_write,
-	.owner = THIS_MODULE,
 };
 
 static int lpc18xx_eeprom_probe(struct platform_device *pdev)

drivers/nvmem/lpc18xx_otp.c

@@ -64,7 +64,6 @@ static struct nvmem_config lpc18xx_otp_nvmem_config = {
 	.read_only = true,
 	.word_size = LPC18XX_OTP_WORD_SIZE,
 	.stride = LPC18XX_OTP_WORD_SIZE,
-	.owner = THIS_MODULE,
 	.reg_read = lpc18xx_otp_read,
 };
 

drivers/nvmem/meson-efuse.c

@@ -1,5 +1,5 @@
 /*
- * Amlogic eFuse Driver
+ * Amlogic Meson GX eFuse Driver
  *
  * Copyright (c) 2016 Endless Computers, Inc.
  * Author: Carlo Caione <carlo@endlessm.com>
@@ -37,7 +37,6 @@ static int meson_efuse_read(void *context, unsigned int offset,
 
 static struct nvmem_config econfig = {
 	.name = "meson-efuse",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.read_only = true,
@@ -89,5 +88,5 @@ static struct platform_driver meson_efuse_driver = {
 module_platform_driver(meson_efuse_driver);
 
 MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
-MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
+MODULE_DESCRIPTION("Amlogic Meson GX NVMEM driver");
 MODULE_LICENSE("GPL v2");

drivers/nvmem/meson-mx-efuse.c

@@ -0,0 +1,265 @@
+/*
+ * Amlogic Meson6, Meson8 and Meson8b eFuse Driver
+ *
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#define MESON_MX_EFUSE_CNTL1					0x04
+#define MESON_MX_EFUSE_CNTL1_PD_ENABLE				BIT(27)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY			BIT(26)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_START			BIT(25)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE			BIT(24)
+#define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA			GENMASK(23, 16)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY			BIT(14)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_START			BIT(13)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE			BIT(12)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET			BIT(11)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK			GENMASK(10, 0)
+
+#define MESON_MX_EFUSE_CNTL2					0x08
+
+#define MESON_MX_EFUSE_CNTL4					0x10
+#define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE			BIT(10)
+
+struct meson_mx_efuse_platform_data {
+	const char *name;
+	unsigned int word_size;
+};
+
+struct meson_mx_efuse {
+	void __iomem *base;
+	struct clk *core_clk;
+	struct nvmem_device *nvmem;
+	struct nvmem_config config;
+};
+
+static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg,
+				     u32 mask, u32 set)
+{
+	u32 data;
+
+	data = readl(efuse->base + reg);
+	data &= ~mask;
+	data |= (set & mask);
+
+	writel(data, efuse->base + reg);
+}
+
+static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse)
+{
+	int err;
+
+	err = clk_prepare_enable(efuse->core_clk);
+	if (err)
+		return err;
+
+	/* power up the efuse */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0);
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4,
+				 MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0);
+
+	return 0;
+}
+
+static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse)
+{
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE);
+
+	clk_disable_unprepare(efuse->core_clk);
+}
+
+static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse,
+				    unsigned int addr, u32 *value)
+{
+	int err;
+	u32 regval;
+
+	/* write the address to read */
+	regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval);
+
+	/* inform the hardware that we changed the address */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0);
+
+	/* start the read process */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0);
+
+	/*
+	 * perform a dummy read to ensure that the HW has the RD_BUSY bit set
+	 * when polling for the status below.
+	 */
+	readl(efuse->base + MESON_MX_EFUSE_CNTL1);
+
+	err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1,
+			regval,
+			(!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)),
+			1, 1000);
+	if (err) {
+		dev_err(efuse->config.dev,
+			"Timeout while reading efuse address %u\n", addr);
+		return err;
+	}
+
+	*value = readl(efuse->base + MESON_MX_EFUSE_CNTL2);
+
+	return 0;
+}
+
+static int meson_mx_efuse_read(void *context, unsigned int offset,
+			       void *buf, size_t bytes)
+{
+	struct meson_mx_efuse *efuse = context;
+	u32 tmp;
+	int err, i, addr;
+
+	err = meson_mx_efuse_hw_enable(efuse);
+	if (err)
+		return err;
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE);
+
+	for (i = offset; i < offset + bytes; i += efuse->config.word_size) {
+		addr = i / efuse->config.word_size;
+
+		err = meson_mx_efuse_read_addr(efuse, addr, &tmp);
+		if (err)
+			break;
+
+		memcpy(buf + i, &tmp, efuse->config.word_size);
+	}
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0);
+
+	meson_mx_efuse_hw_disable(efuse);
+
+	return err;
+}
+
+static const struct meson_mx_efuse_platform_data meson6_efuse_data = {
+	.name = "meson6-efuse",
+	.word_size = 1,
+};
+
+static const struct meson_mx_efuse_platform_data meson8_efuse_data = {
+	.name = "meson8-efuse",
+	.word_size = 4,
+};
+
+static const struct meson_mx_efuse_platform_data meson8b_efuse_data = {
+	.name = "meson8b-efuse",
+	.word_size = 4,
+};
+
+static const struct of_device_id meson_mx_efuse_match[] = {
+	{ .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data },
+	{ .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data },
+	{ .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mx_efuse_match);
+
+static int meson_mx_efuse_probe(struct platform_device *pdev)
+{
+	const struct meson_mx_efuse_platform_data *drvdata;
+	struct meson_mx_efuse *efuse;
+	struct resource *res;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -EINVAL;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	efuse->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->config.name = devm_kstrdup(&pdev->dev, drvdata->name,
+					  GFP_KERNEL);
+	efuse->config.owner = THIS_MODULE;
+	efuse->config.dev = &pdev->dev;
+	efuse->config.priv = efuse;
+	efuse->config.stride = drvdata->word_size;
+	efuse->config.word_size = drvdata->word_size;
+	efuse->config.size = SZ_512;
+	efuse->config.read_only = true;
+	efuse->config.reg_read = meson_mx_efuse_read;
+
+	efuse->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(efuse->core_clk)) {
+		dev_err(&pdev->dev, "Failed to get core clock\n");
+		return PTR_ERR(efuse->core_clk);
+	}
+
+	efuse->nvmem = nvmem_register(&efuse->config);
+	if (IS_ERR(efuse->nvmem))
+		return PTR_ERR(efuse->nvmem);
+
+	platform_set_drvdata(pdev, efuse);
+
+	return 0;
+}
+
+static int meson_mx_efuse_remove(struct platform_device *pdev)
+{
+	struct meson_mx_efuse *efuse = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(efuse->nvmem);
+}
+
+static struct platform_driver meson_mx_efuse_driver = {
+	.probe = meson_mx_efuse_probe,
+	.remove = meson_mx_efuse_remove,
+	.driver = {
+		.name = "meson-mx-efuse",
+		.of_match_table = meson_mx_efuse_match,
+	},
+};
+
+module_platform_driver(meson_mx_efuse_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver");
+MODULE_LICENSE("GPL v2");

drivers/nvmem/mtk-efuse.c

@@ -18,15 +18,19 @@
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
 
+struct mtk_efuse_priv {
+	void __iomem *base;
+};
+
 static int mtk_reg_read(void *context,
 			unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct mtk_efuse_priv *priv = context;
 	u32 *val = _val;
 	int i = 0, words = bytes / 4;
 
 	while (words--)
-		*val++ = readl(base + reg + (i++ * 4));
+		*val++ = readl(priv->base + reg + (i++ * 4));
 
 	return 0;
 }
@@ -34,12 +38,12 @@ static int mtk_reg_read(void *context,
 static int mtk_reg_write(void *context,
 			 unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct mtk_efuse_priv *priv = context;
 	u32 *val = _val;
 	int i = 0, words = bytes / 4;
 
 	while (words--)
-		writel(*val++, base + reg + (i++ * 4));
+		writel(*val++, priv->base + reg + (i++ * 4));
 
 	return 0;
 }
@@ -49,27 +53,26 @@ static int mtk_efuse_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct nvmem_device *nvmem;
-	struct nvmem_config *econfig;
-	void __iomem *base;
+	struct nvmem_config econfig = {};
+	struct mtk_efuse_priv *priv;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
-	if (!econfig)
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
-	econfig->stride = 4;
-	econfig->word_size = 4;
-	econfig->reg_read = mtk_reg_read;
-	econfig->reg_write = mtk_reg_write;
-	econfig->size = resource_size(res);
-	econfig->priv = base;
-	econfig->dev = dev;
-	econfig->owner = THIS_MODULE;
-	nvmem = nvmem_register(econfig);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 4;
+	econfig.word_size = 4;
+	econfig.reg_read = mtk_reg_read;
+	econfig.reg_write = mtk_reg_write;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = nvmem_register(&econfig);
 	if (IS_ERR(nvmem))
 		return PTR_ERR(nvmem);
 

drivers/nvmem/mxs-ocotp.c

@@ -118,7 +118,6 @@ static struct nvmem_config ocotp_config = {
 	.name = "mxs-ocotp",
 	.stride = 16,
 	.word_size = 4,
-	.owner = THIS_MODULE,
 	.reg_read = mxs_ocotp_read,
 };
 

drivers/nvmem/qfprom.c

@@ -17,15 +17,19 @@
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>
 
+struct qfprom_priv {
+	void __iomem *base;
+};
+
 static int qfprom_reg_read(void *context,
 			unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct qfprom_priv *priv = context;
 	u8 *val = _val;
 	int i = 0, words = bytes;
 
 	while (words--)
-		*val++ = readb(base + reg + i++);
+		*val++ = readb(priv->base + reg + i++);
 
 	return 0;
 }
@@ -33,12 +37,12 @@ static int qfprom_reg_read(void *context,
 static int qfprom_reg_write(void *context,
 			 unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct qfprom_priv *priv = context;
 	u8 *val = _val;
 	int i = 0, words = bytes;
 
 	while (words--)
-		writeb(*val++, base + reg + i++);
+		writeb(*val++, priv->base + reg + i++);
 
 	return 0;
 }
@@ -52,7 +56,6 @@ static int qfprom_remove(struct platform_device *pdev)
 
 static struct nvmem_config econfig = {
 	.name = "qfprom",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.reg_read = qfprom_reg_read,
@@ -64,16 +67,20 @@ static int qfprom_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct nvmem_device *nvmem;
-	void __iomem *base;
+	struct qfprom_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
 
 	econfig.size = resource_size(res);
 	econfig.dev = dev;
-	econfig.priv = base;
+	econfig.priv = priv;
 
 	nvmem = nvmem_register(&econfig);
 	if (IS_ERR(nvmem))

drivers/nvmem/rockchip-efuse.c

@@ -149,7 +149,6 @@ static int rockchip_rk3399_efuse_read(void *context, unsigned int offset,
 
 static struct nvmem_config econfig = {
 	.name = "rockchip-efuse",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.read_only = true,
@@ -177,6 +176,10 @@ static const struct of_device_id rockchip_efuse_match[] = {
 		.compatible = "rockchip,rk3288-efuse",
 		.data = (void *)&rockchip_rk3288_efuse_read,
 	},
+	{
+		.compatible = "rockchip,rk3368-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
 	{
 		.compatible = "rockchip,rk3399-efuse",
 		.data = (void *)&rockchip_rk3399_efuse_read,

drivers/nvmem/snvs_lpgpr.c

@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define IMX6Q_SNVS_HPLR		0x00
+#define IMX6Q_GPR_SL		BIT(5)
+#define IMX6Q_SNVS_LPLR		0x34
+#define IMX6Q_GPR_HL		BIT(5)
+#define IMX6Q_SNVS_LPGPR	0x68
+
+struct snvs_lpgpr_cfg {
+	int offset;
+	int offset_hplr;
+	int offset_lplr;
+};
+
+struct snvs_lpgpr_priv {
+	struct device_d			*dev;
+	struct regmap			*regmap;
+	struct nvmem_config		cfg;
+	const struct snvs_lpgpr_cfg	*dcfg;
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
+	.offset		= IMX6Q_SNVS_LPGPR,
+	.offset_hplr	= IMX6Q_SNVS_HPLR,
+	.offset_lplr	= IMX6Q_SNVS_LPLR,
+};
+
+static int snvs_lpgpr_write(void *context, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+	unsigned int lock_reg;
+	int ret;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX6Q_GPR_SL)
+		return -EPERM;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX6Q_GPR_HL)
+		return -EPERM;
+
+	return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
+				bytes / 4);
+}
+
+static int snvs_lpgpr_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+
+	return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
+			       val, bytes / 4);
+}
+
+static int snvs_lpgpr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *syscon_node;
+	struct snvs_lpgpr_priv *priv;
+	struct nvmem_config *cfg;
+	struct nvmem_device *nvmem;
+	const struct snvs_lpgpr_cfg *dcfg;
+
+	if (!node)
+		return -ENOENT;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dcfg = of_device_get_match_data(dev);
+	if (!dcfg)
+		return -EINVAL;
+
+	syscon_node = of_get_parent(node);
+	if (!syscon_node)
+		return -ENODEV;
+
+	priv->regmap = syscon_node_to_regmap(syscon_node);
+	of_node_put(syscon_node);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->dcfg = dcfg;
+
+	cfg = &priv->cfg;
+	cfg->priv = priv;
+	cfg->name = dev_name(dev);
+	cfg->dev = dev;
+	cfg->stride = 4,
+	cfg->word_size = 4,
+	cfg->size = 4,
+	cfg->owner = THIS_MODULE,
+	cfg->reg_read  = snvs_lpgpr_read,
+	cfg->reg_write = snvs_lpgpr_write,
+
+	nvmem = nvmem_register(cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int snvs_lpgpr_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id snvs_lpgpr_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx6ul-snvs-lpgpr",
+	  .data = &snvs_lpgpr_cfg_imx6q },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, snvs_lpgpr_dt_ids);
+
+static struct platform_driver snvs_lpgpr_driver = {
+	.probe	= snvs_lpgpr_probe,
+	.remove	= snvs_lpgpr_remove,
+	.driver = {
+		.name	= "snvs_lpgpr",
+		.of_match_table = snvs_lpgpr_dt_ids,
+	},
+};
+module_platform_driver(snvs_lpgpr_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Low Power General Purpose Register in i.MX6 Secure Non-Volatile Storage");
+MODULE_LICENSE("GPL v2");

drivers/nvmem/sunxi_sid.c

@@ -40,7 +40,6 @@ static struct nvmem_config econfig = {
 	.read_only = true,
 	.stride = 4,
 	.word_size = 1,
-	.owner = THIS_MODULE,
 };
 
 struct sunxi_sid_cfg {
@@ -199,10 +198,16 @@ static const struct sunxi_sid_cfg sun8i_h3_cfg = {
 	.need_register_readout = true,
 };
 
+static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+};
+
 static const struct of_device_id sunxi_sid_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
 	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
 	{/* sentinel */},
 };
 MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);

drivers/nvmem/uniphier-efuse.c

@@ -0,0 +1,97 @@
+/*
+ * UniPhier eFuse driver
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct uniphier_efuse_priv {
+	void __iomem *base;
+};
+
+static int uniphier_reg_read(void *context,
+			     unsigned int reg, void *_val, size_t bytes)
+{
+	struct uniphier_efuse_priv *priv = context;
+	u32 *val = _val;
+	int offs;
+
+	for (offs = 0; offs < bytes; offs += sizeof(u32))
+		*val++ = readl(priv->base + reg + offs);
+
+	return 0;
+}
+
+static int uniphier_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct uniphier_efuse_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 4;
+	econfig.word_size = 4;
+	econfig.read_only = true;
+	econfig.reg_read = uniphier_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = nvmem_register(&econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int uniphier_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id uniphier_efuse_of_match[] = {
+	{ .compatible = "socionext,uniphier-efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, uniphier_efuse_of_match);
+
+static struct platform_driver uniphier_efuse_driver = {
+	.probe = uniphier_efuse_probe,
+	.remove = uniphier_efuse_remove,
+	.driver = {
+		.name = "uniphier-efuse",
+		.of_match_table = uniphier_efuse_of_match,
+	},
+};
+module_platform_driver(uniphier_efuse_driver);
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier eFuse driver");
+MODULE_LICENSE("GPL v2");

drivers/nvmem/vf610-ocotp.c

@@ -206,7 +206,6 @@ static int vf610_ocotp_read(void *context, unsigned int offset,
 
 static struct nvmem_config ocotp_config = {
 	.name = "ocotp",
-	.owner = THIS_MODULE,
 	.stride = 4,
 	.word_size = 4,
 	.reg_read = vf610_ocotp_read,

drivers/parport/parport_ip32.c

@@ -1769,7 +1769,7 @@ stop:
 
 /*--- Default parport operations ---------------------------------------*/
 
-static __initdata struct parport_operations parport_ip32_ops = {
+static const struct parport_operations parport_ip32_ops __initconst = {
 	.write_data		= parport_ip32_write_data,
 	.read_data		= parport_ip32_read_data,
 

drivers/pcmcia/cistpl.c

@@ -1599,7 +1599,7 @@ static ssize_t pccard_store_cis(struct file *filp, struct kobject *kobj,
 }
 
 
-struct bin_attribute pccard_cis_attr = {
+const struct bin_attribute pccard_cis_attr = {
 	.attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
 	.size = 0x200,
 	.read = pccard_show_cis,

drivers/pcmcia/cs_internal.h

@@ -152,7 +152,7 @@ void pcmcia_cleanup_irq(struct pcmcia_socket *s);
 int pcmcia_setup_irq(struct pcmcia_device *p_dev);
 
 /* cistpl.c */
-extern struct bin_attribute pccard_cis_attr;
+extern const struct bin_attribute pccard_cis_attr;
 
 int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
 			u_int addr, u_int len, void *ptr);

drivers/pcmcia/m32r_cfc.c

@@ -380,11 +380,10 @@ static irqreturn_t pcc_interrupt(int irq, void *dev)
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */
 
-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
 {
 	pr_debug("m32r_cfc: pcc_interrupt_wrapper:\n");
 	pcc_interrupt(0, NULL);
-	init_timer(&poll_timer);
 	poll_timer.expires = jiffies + poll_interval;
 	add_timer(&poll_timer);
 }
@@ -758,9 +757,7 @@ static int __init init_m32r_pcc(void)
 
 	/* Finally, schedule a polling interrupt */
 	if (poll_interval != 0) {
-		poll_timer.function = pcc_interrupt_wrapper;
-		poll_timer.data = 0;
-		init_timer(&poll_timer);
+		timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
 		poll_timer.expires = jiffies + poll_interval;
 		add_timer(&poll_timer);
 	}

drivers/pcmcia/m32r_pcc.c

@@ -386,10 +386,9 @@ static irqreturn_t pcc_interrupt(int irq, void *dev)
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */
 
-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
 {
 	pcc_interrupt(0, NULL);
-	init_timer(&poll_timer);
 	poll_timer.expires = jiffies + poll_interval;
 	add_timer(&poll_timer);
 }
@@ -729,9 +728,7 @@ static int __init init_m32r_pcc(void)
 
 	/* Finally, schedule a polling interrupt */
 	if (poll_interval != 0) {
-		poll_timer.function = pcc_interrupt_wrapper;
-		poll_timer.data = 0;
-		init_timer(&poll_timer);
+		timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
 		poll_timer.expires = jiffies + poll_interval;
 		add_timer(&poll_timer);
 	}

drivers/thunderbolt/tb.c

@@ -225,6 +225,7 @@ static void tb_activate_pcie_devices(struct tb *tb)
 			tb_port_info(up_port,
 				     "PCIe tunnel activation failed, aborting\n");
 			tb_pci_free(tunnel);
+			continue;
 		}
 
 		list_add(&tunnel->list, &tcm->tunnel_list);

drivers/vme/bridges/vme_ca91cx42.c

@@ -511,7 +511,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 	ca91cx42_bridge = image->parent;
 
 	/* Find pci_dev container of dev */
-	if (ca91cx42_bridge->parent == NULL) {
+	if (!ca91cx42_bridge->parent) {
 		dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n");
 		return -EINVAL;
 	}
@@ -529,14 +529,12 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 		image->kern_base = NULL;
 		kfree(image->bus_resource.name);
 		release_resource(&image->bus_resource);
-		memset(&image->bus_resource, 0, sizeof(struct resource));
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 	}
 
-	if (image->bus_resource.name == NULL) {
+	if (!image->bus_resource.name) {
 		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
-		if (image->bus_resource.name == NULL) {
-			dev_err(ca91cx42_bridge->parent, "Unable to allocate "
-				"memory for resource name\n");
+		if (!image->bus_resource.name) {
 			retval = -ENOMEM;
 			goto err_name;
 		}
@@ -562,7 +560,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 
 	image->kern_base = ioremap_nocache(
 		image->bus_resource.start, size);
-	if (image->kern_base == NULL) {
+	if (!image->kern_base) {
 		dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n");
 		retval = -ENOMEM;
 		goto err_remap;
@@ -574,7 +572,7 @@ err_remap:
 	release_resource(&image->bus_resource);
 err_resource:
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 err_name:
 	return retval;
 }
@@ -588,7 +586,7 @@ static void ca91cx42_free_resource(struct vme_master_resource *image)
 	image->kern_base = NULL;
 	release_resource(&image->bus_resource);
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 }
 
 
@@ -1036,10 +1034,8 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 	dev = list->parent->parent->parent;
 
 	/* XXX descriptor must be aligned on 64-bit boundaries */
-	entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL);
-	if (entry == NULL) {
-		dev_err(dev, "Failed to allocate memory for dma resource "
-			"structure\n");
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
 		retval = -ENOMEM;
 		goto err_mem;
 	}
@@ -1052,7 +1048,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 		goto err_align;
 	}
 
-	memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor));
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));
 
 	if (dest->type == VME_DMA_VME) {
 		entry->descriptor.dctl |= CA91CX42_DCTL_L2V;
@@ -1323,7 +1319,7 @@ static int ca91cx42_lm_set(struct vme_lm_resource *lm,
 
 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			dev_err(dev, "Location monitor callback attached, "
 				"can't reset\n");
@@ -1432,7 +1428,7 @@ static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}
 
 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		dev_err(dev, "Existing callback attached\n");
 		return -EBUSY;
@@ -1567,7 +1563,7 @@ static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge,
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
 						     &bridge->crcsr_bus);
-	if (bridge->crcsr_kernel == NULL) {
+	if (!bridge->crcsr_kernel) {
 		dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR "
 			"image\n");
 		return -ENOMEM;
@@ -1618,21 +1614,15 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* We want to support more than one of each bridge so we need to
 	 * dynamically allocate the bridge structure
 	 */
-	ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-
-	if (ca91cx42_bridge == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	ca91cx42_bridge = kzalloc(sizeof(*ca91cx42_bridge), GFP_KERNEL);
+	if (!ca91cx42_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}
 	vme_init_bridge(ca91cx42_bridge);
 
-	ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL);
-
-	if (ca91cx42_device == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	ca91cx42_device = kzalloc(sizeof(*ca91cx42_device), GFP_KERNEL);
+	if (!ca91cx42_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@@ -1688,11 +1678,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Add master windows to list */
 	for (i = 0; i < CA91C142_MAX_MASTER; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-			GFP_KERNEL);
-		if (master_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"master resource structure\n");
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@@ -1706,7 +1693,7 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			VME_SUPER | VME_USER | VME_PROG | VME_DATA;
 		master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64;
 		memset(&master_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(master_image->bus_resource));
 		master_image->kern_base  = NULL;
 		list_add_tail(&master_image->list,
 			&ca91cx42_bridge->master_resources);
@@ -1714,11 +1701,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Add slave windows to list */
 	for (i = 0; i < CA91C142_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-			GFP_KERNEL);
-		if (slave_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"slave resource structure\n");
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@@ -1741,11 +1725,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Add dma engines to list */
 	for (i = 0; i < CA91C142_MAX_DMA; i++) {
-		dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
-			GFP_KERNEL);
-		if (dma_ctrlr == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"dma resource structure\n");
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
 			retval = -ENOMEM;
 			goto err_dma;
 		}
@@ -1762,10 +1743,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* Add location monitor to list */
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for "
-		"location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}

drivers/vme/bridges/vme_fake.c

@@ -409,7 +409,7 @@ static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr,
 				/* Each location monitor covers 8 bytes */
 				if (((lm_base + (8 * i)) <= addr) &&
 				    ((lm_base + (8 * i) + 8) > addr)) {
-					if (bridge->lm_callback[i] != NULL)
+					if (bridge->lm_callback[i])
 						bridge->lm_callback[i](
 							bridge->lm_data[i]);
 				}
@@ -866,7 +866,7 @@ static int fake_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,
 
 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			pr_err("Location monitor callback attached, can't reset\n");
 			return -EBUSY;
@@ -940,7 +940,7 @@ static int fake_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}
 
 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		pr_err("Existing callback attached\n");
 		return -EBUSY;
@@ -978,7 +978,7 @@ static int fake_lm_detach(struct vme_lm_resource *lm, int monitor)
 	/* If all location monitors disabled, disable global Location Monitor */
 	tmp = 0;
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL)
+		if (bridge->lm_callback[i])
 			tmp = 1;
 	}
 
@@ -1003,7 +1003,7 @@ static void *fake_alloc_consistent(struct device *parent, size_t size,
 {
 	void *alloc = kmalloc(size, GFP_KERNEL);
 
-	if (alloc != NULL)
+	if (alloc)
 		*dma = fake_ptr_to_pci(alloc);
 
 	return alloc;
@@ -1039,7 +1039,7 @@ static int fake_crcsr_init(struct vme_bridge *fake_bridge)
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL);
 	bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel);
-	if (bridge->crcsr_kernel == NULL)
+	if (!bridge->crcsr_kernel)
 		return -ENOMEM;
 
 	vstat = fake_slot_get(fake_bridge);
@@ -1075,14 +1075,14 @@ static int __init fake_init(void)
 	/* If we want to support more than one bridge at some point, we need to
 	 * dynamically allocate this so we get one per device.
 	 */
-	fake_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-	if (fake_bridge == NULL) {
+	fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL);
+	if (!fake_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}
 
-	fake_device = kzalloc(sizeof(struct fake_driver), GFP_KERNEL);
-	if (fake_device == NULL) {
+	fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL);
+	if (!fake_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@@ -1104,9 +1104,8 @@ static int __init fake_init(void)
 	/* Add master windows to list */
 	INIT_LIST_HEAD(&fake_bridge->master_resources);
 	for (i = 0; i < FAKE_MAX_MASTER; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-				GFP_KERNEL);
-		if (master_image == NULL) {
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@@ -1131,9 +1130,8 @@ static int __init fake_init(void)
 	/* Add slave windows to list */
 	INIT_LIST_HEAD(&fake_bridge->slave_resources);
 	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-				GFP_KERNEL);
-		if (slave_image == NULL) {
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@@ -1154,9 +1152,8 @@ static int __init fake_init(void)
 
 	/* Add location monitor to list */
 	INIT_LIST_HEAD(&fake_bridge->lm_resources);
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		pr_err("Failed to allocate memory for location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}

drivers/vme/bridges/vme_tsi148.c

@@ -741,18 +741,16 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 		image->kern_base = NULL;
 		kfree(image->bus_resource.name);
 		release_resource(&image->bus_resource);
-		memset(&image->bus_resource, 0, sizeof(struct resource));
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 	}
 
 	/* Exit here if size is zero */
 	if (size == 0)
 		return 0;
 
-	if (image->bus_resource.name == NULL) {
+	if (!image->bus_resource.name) {
 		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
-		if (image->bus_resource.name == NULL) {
-			dev_err(tsi148_bridge->parent, "Unable to allocate "
-				"memory for resource name\n");
+		if (!image->bus_resource.name) {
 			retval = -ENOMEM;
 			goto err_name;
 		}
@@ -778,7 +776,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 
 	image->kern_base = ioremap_nocache(
 		image->bus_resource.start, size);
-	if (image->kern_base == NULL) {
+	if (!image->kern_base) {
 		dev_err(tsi148_bridge->parent, "Failed to remap resource\n");
 		retval = -ENOMEM;
 		goto err_remap;
@@ -790,7 +788,7 @@ err_remap:
 	release_resource(&image->bus_resource);
 err_resource:
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 err_name:
 	return retval;
 }
@@ -804,7 +802,7 @@ static void tsi148_free_resource(struct vme_master_resource *image)
 	image->kern_base = NULL;
 	release_resource(&image->bus_resource);
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 }
 
 /*
@@ -1641,10 +1639,8 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	tsi148_bridge = list->parent->parent;
 
 	/* Descriptor must be aligned on 64-bit boundaries */
-	entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL);
-	if (entry == NULL) {
-		dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
-			"dma resource structure\n");
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
 		retval = -ENOMEM;
 		goto err_mem;
 	}
@@ -1661,7 +1657,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	/* Given we are going to fill out the structure, we probably don't
 	 * need to zero it, but better safe than sorry for now.
 	 */
-	memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor));
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));
 
 	/* Fill out source part */
 	switch (src->type) {
@@ -1756,8 +1752,9 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	list_add_tail(&entry->list, &list->entries);
 
 	entry->dma_handle = dma_map_single(tsi148_bridge->parent,
-		&entry->descriptor,
-		sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+					   &entry->descriptor,
+					   sizeof(entry->descriptor),
+					   DMA_TO_DEVICE);
 	if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) {
 		dev_err(tsi148_bridge->parent, "DMA mapping error\n");
 		retval = -EINVAL;
@@ -1946,7 +1943,7 @@ static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,
 
 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			dev_err(tsi148_bridge->parent, "Location monitor "
 				"callback attached, can't reset\n");
@@ -2071,7 +2068,7 @@ static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}
 
 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		dev_err(tsi148_bridge->parent, "Existing callback attached\n");
 		return -EBUSY;
@@ -2208,7 +2205,7 @@ static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge,
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
 						     &bridge->crcsr_bus);
-	if (bridge->crcsr_kernel == NULL) {
+	if (!bridge->crcsr_kernel) {
 		dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
 			"CR/CSR image\n");
 		return -ENOMEM;
@@ -2294,19 +2291,15 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* If we want to support more than one of each bridge, we need to
 	 * dynamically generate this so we get one per device
 	 */
-	tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-	if (tsi148_bridge == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	tsi148_bridge = kzalloc(sizeof(*tsi148_bridge), GFP_KERNEL);
+	if (!tsi148_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}
 	vme_init_bridge(tsi148_bridge);
 
-	tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL);
-	if (tsi148_device == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	tsi148_device = kzalloc(sizeof(*tsi148_device), GFP_KERNEL);
+	if (!tsi148_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@@ -2371,10 +2364,9 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		master_num--;
 
 		tsi148_device->flush_image =
-			kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL);
-		if (tsi148_device->flush_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"flush resource structure\n");
+			kmalloc(sizeof(*tsi148_device->flush_image),
+				GFP_KERNEL);
+		if (!tsi148_device->flush_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@@ -2383,17 +2375,14 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		tsi148_device->flush_image->locked = 1;
 		tsi148_device->flush_image->number = master_num;
 		memset(&tsi148_device->flush_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(tsi148_device->flush_image->bus_resource));
 		tsi148_device->flush_image->kern_base  = NULL;
 	}
 
 	/* Add master windows to list */
 	for (i = 0; i < master_num; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-			GFP_KERNEL);
-		if (master_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"master resource structure\n");
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@@ -2410,7 +2399,7 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			VME_PROG | VME_DATA;
 		master_image->width_attr = VME_D16 | VME_D32;
 		memset(&master_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(master_image->bus_resource));
 		master_image->kern_base  = NULL;
 		list_add_tail(&master_image->list,
 			&tsi148_bridge->master_resources);
@@ -2418,11 +2407,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Add slave windows to list */
 	for (i = 0; i < TSI148_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-			GFP_KERNEL);
-		if (slave_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"slave resource structure\n");
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@@ -2442,11 +2428,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	/* Add dma engines to list */
 	for (i = 0; i < TSI148_MAX_DMA; i++) {
-		dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
-			GFP_KERNEL);
-		if (dma_ctrlr == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"dma resource structure\n");
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
 			retval = -ENOMEM;
 			goto err_dma;
 		}
@@ -2465,10 +2448,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* Add location monitor to list */
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for "
-		"location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}

drivers/vme/vme.c

@@ -92,23 +92,23 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size,
 {
 	struct vme_bridge *bridge;
 
-	if (resource == NULL) {
+	if (!resource) {
 		printk(KERN_ERR "No resource\n");
 		return NULL;
 	}
 
 	bridge = find_bridge(resource);
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find bridge\n");
 		return NULL;
 	}
 
-	if (bridge->parent == NULL) {
+	if (!bridge->parent) {
 		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return NULL;
 	}
 
-	if (bridge->alloc_consistent == NULL) {
+	if (!bridge->alloc_consistent) {
 		printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
 		       bridge->name);
 		return NULL;
@@ -132,23 +132,23 @@ void vme_free_consistent(struct vme_resource *resource, size_t size,
 {
 	struct vme_bridge *bridge;
 
-	if (resource == NULL) {
+	if (!resource) {
 		printk(KERN_ERR "No resource\n");
 		return;
 	}
 
 	bridge = find_bridge(resource);
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find bridge\n");
 		return;
 	}
 
-	if (bridge->parent == NULL) {
+	if (!bridge->parent) {
 		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return;
 	}
 
-	if (bridge->free_consistent == NULL) {
+	if (!bridge->free_consistent) {
 		printk(KERN_ERR "free_consistent not supported by bridge %s\n",
 		       bridge->name);
 		return;
@@ -208,29 +208,27 @@ int vme_check_window(u32 aspace, unsigned long long vme_base,
 {
 	int retval = 0;
 
+	if (vme_base + size < size)
+		return -EINVAL;
+
 	switch (aspace) {
 	case VME_A16:
-		if (((vme_base + size) > VME_A16_MAX) ||
-				(vme_base > VME_A16_MAX))
+		if (vme_base + size > VME_A16_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A24:
-		if (((vme_base + size) > VME_A24_MAX) ||
-				(vme_base > VME_A24_MAX))
+		if (vme_base + size > VME_A24_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A32:
-		if (((vme_base + size) > VME_A32_MAX) ||
-				(vme_base > VME_A32_MAX))
+		if (vme_base + size > VME_A32_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A64:
-		if ((size != 0) && (vme_base > U64_MAX + 1 - size))
-			retval = -EFAULT;
+		/* The VME_A64_MAX limit is actually U64_MAX + 1 */
 		break;
 	case VME_CRCSR:
-		if (((vme_base + size) > VME_CRCSR_MAX) ||
-				(vme_base > VME_CRCSR_MAX))
+		if (vme_base + size > VME_CRCSR_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_USER1:
@@ -303,7 +301,7 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 	struct vme_resource *resource = NULL;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@@ -313,7 +311,7 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 		slave_image = list_entry(slave_pos,
 			struct vme_slave_resource, list);
 
-		if (slave_image == NULL) {
+		if (!slave_image) {
 			printk(KERN_ERR "Registered NULL Slave resource\n");
 			continue;
 		}
@@ -333,14 +331,13 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 	}
 
 	/* No free image */
-	if (allocated_image == NULL)
+	if (!allocated_image)
 		goto err_image;
 
-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_WARNING "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_SLAVE;
 	resource->entry = &allocated_image->list;
 
@@ -389,7 +386,7 @@ int vme_slave_set(struct vme_resource *resource, int enabled,
 
 	image = list_entry(resource->entry, struct vme_slave_resource, list);
 
-	if (bridge->slave_set == NULL) {
+	if (!bridge->slave_set) {
 		printk(KERN_ERR "Function not supported\n");
 		return -ENOSYS;
 	}
@@ -438,7 +435,7 @@ int vme_slave_get(struct vme_resource *resource, int *enabled,
 
 	image = list_entry(resource->entry, struct vme_slave_resource, list);
 
-	if (bridge->slave_get == NULL) {
+	if (!bridge->slave_get) {
 		printk(KERN_ERR "vme_slave_get not supported\n");
 		return -EINVAL;
 	}
@@ -465,7 +462,7 @@ void vme_slave_free(struct vme_resource *resource)
 
 	slave_image = list_entry(resource->entry, struct vme_slave_resource,
 		list);
-	if (slave_image == NULL) {
+	if (!slave_image) {
 		printk(KERN_ERR "Can't find slave resource\n");
 		return;
 	}
@@ -505,7 +502,7 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 	struct vme_resource *resource = NULL;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@@ -515,7 +512,7 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 		master_image = list_entry(master_pos,
 			struct vme_master_resource, list);
 
-		if (master_image == NULL) {
+		if (!master_image) {
 			printk(KERN_WARNING "Registered NULL master resource\n");
 			continue;
 		}
@@ -536,16 +533,15 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 	}
 
 	/* Check to see if we found a resource */
-	if (allocated_image == NULL) {
+	if (!allocated_image) {
 		printk(KERN_ERR "Can't find a suitable resource\n");
 		goto err_image;
 	}
 
-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_ERR "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_MASTER;
 	resource->entry = &allocated_image->list;
 
@@ -594,7 +590,7 @@ int vme_master_set(struct vme_resource *resource, int enabled,
 
 	image = list_entry(resource->entry, struct vme_master_resource, list);
 
-	if (bridge->master_set == NULL) {
+	if (!bridge->master_set) {
 		printk(KERN_WARNING "vme_master_set not supported\n");
 		return -EINVAL;
 	}
@@ -644,7 +640,7 @@ int vme_master_get(struct vme_resource *resource, int *enabled,
 
 	image = list_entry(resource->entry, struct vme_master_resource, list);
 
-	if (bridge->master_get == NULL) {
+	if (!bridge->master_get) {
 		printk(KERN_WARNING "%s not supported\n", __func__);
 		return -EINVAL;
 	}
@@ -676,7 +672,7 @@ ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count,
 	struct vme_master_resource *image;
 	size_t length;
 
-	if (bridge->master_read == NULL) {
+	if (!bridge->master_read) {
 		printk(KERN_WARNING "Reading from resource not supported\n");
 		return -EINVAL;
 	}
@@ -725,7 +721,7 @@ ssize_t vme_master_write(struct vme_resource *resource, void *buf,
 	struct vme_master_resource *image;
 	size_t length;
 
-	if (bridge->master_write == NULL) {
+	if (!bridge->master_write) {
 		printk(KERN_WARNING "Writing to resource not supported\n");
 		return -EINVAL;
 	}
@@ -776,7 +772,7 @@ unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask,
 	struct vme_bridge *bridge = find_bridge(resource);
 	struct vme_master_resource *image;
 
-	if (bridge->master_rmw == NULL) {
+	if (!bridge->master_rmw) {
 		printk(KERN_WARNING "Writing to resource not supported\n");
 		return -EINVAL;
 	}
@@ -846,7 +842,7 @@ void vme_master_free(struct vme_resource *resource)
 
 	master_image = list_entry(resource->entry, struct vme_master_resource,
 		list);
-	if (master_image == NULL) {
+	if (!master_image) {
 		printk(KERN_ERR "Can't find master resource\n");
 		return;
 	}
@@ -886,7 +882,7 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	printk(KERN_ERR "No VME resource Attribute tests done\n");
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@@ -895,8 +891,7 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	list_for_each(dma_pos, &bridge->dma_resources) {
 		dma_ctrlr = list_entry(dma_pos,
 			struct vme_dma_resource, list);
-
-		if (dma_ctrlr == NULL) {
+		if (!dma_ctrlr) {
 			printk(KERN_ERR "Registered NULL DMA resource\n");
 			continue;
 		}
@@ -915,14 +910,13 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	}
 
 	/* Check to see if we found a resource */
-	if (allocated_ctrlr == NULL)
+	if (!allocated_ctrlr)
 		goto err_ctrlr;
 
-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_WARNING "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_DMA;
 	resource->entry = &allocated_ctrlr->list;
 
@@ -951,7 +945,6 @@ EXPORT_SYMBOL(vme_dma_request);
  */
 struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
 {
-	struct vme_dma_resource *ctrlr;
 	struct vme_dma_list *dma_list;
 
 	if (resource->type != VME_DMA) {
@@ -959,15 +952,14 @@ struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
 		return NULL;
 	}
 
-	ctrlr = list_entry(resource->entry, struct vme_dma_resource, list);
-
-	dma_list = kmalloc(sizeof(struct vme_dma_list), GFP_KERNEL);
-	if (dma_list == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for new DMA list\n");
+	dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL);
+	if (!dma_list)
 		return NULL;
-	}
+
 	INIT_LIST_HEAD(&dma_list->entries);
-	dma_list->parent = ctrlr;
+	dma_list->parent = list_entry(resource->entry,
+				      struct vme_dma_resource,
+				      list);
 	mutex_init(&dma_list->mtx);
 
 	return dma_list;
@@ -990,17 +982,13 @@ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type)
 	struct vme_dma_attr *attributes;
 	struct vme_dma_pattern *pattern_attr;
 
-	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}
 
-	pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL);
-	if (pattern_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pattern attributes\n");
+	pattern_attr = kmalloc(sizeof(*pattern_attr), GFP_KERNEL);
+	if (!pattern_attr)
 		goto err_pat;
-	}
 
 	attributes->type = VME_DMA_PATTERN;
 	attributes->private = (void *)pattern_attr;
@@ -1034,19 +1022,13 @@ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address)
 
 	/* XXX Run some sanity checks here */
 
-	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}
 
-	pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL);
-	if (pci_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for PCI attributes\n");
+	pci_attr = kmalloc(sizeof(*pci_attr), GFP_KERNEL);
+	if (!pci_attr)
 		goto err_pci;
-	}
-
-
 
 	attributes->type = VME_DMA_PCI;
 	attributes->private = (void *)pci_attr;
@@ -1081,18 +1063,13 @@ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address,
 	struct vme_dma_attr *attributes;
 	struct vme_dma_vme *vme_attr;
 
-	attributes = kmalloc(
-		sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}
 
-	vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL);
-	if (vme_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for VME attributes\n");
+	vme_attr = kmalloc(sizeof(*vme_attr), GFP_KERNEL);
+	if (!vme_attr)
 		goto err_vme;
-	}
 
 	attributes->type = VME_DMA_VME;
 	attributes->private = (void *)vme_attr;
@@ -1148,7 +1125,7 @@ int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;
 
-	if (bridge->dma_list_add == NULL) {
+	if (!bridge->dma_list_add) {
 		printk(KERN_WARNING "Link List DMA generation not supported\n");
 		return -EINVAL;
 	}
@@ -1181,7 +1158,7 @@ int vme_dma_list_exec(struct vme_dma_list *list)
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;
 
-	if (bridge->dma_list_exec == NULL) {
+	if (!bridge->dma_list_exec) {
 		printk(KERN_ERR "Link List DMA execution not supported\n");
 		return -EINVAL;
 	}
@@ -1210,14 +1187,14 @@ int vme_dma_list_free(struct vme_dma_list *list)
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;
 
-	if (bridge->dma_list_empty == NULL) {
+	if (!bridge->dma_list_empty) {
 		printk(KERN_WARNING "Emptying of Link Lists not supported\n");
 		return -EINVAL;
 	}
 
 	if (!mutex_trylock(&list->mtx)) {
 		printk(KERN_ERR "Link List in use\n");
-		return -EINVAL;
+		return -EBUSY;
 	}
 
 	/*
@@ -1342,8 +1319,7 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid)
 
 	call = bridge->irq[level - 1].callback[statid].func;
 	priv_data = bridge->irq[level - 1].callback[statid].priv_data;
-
-	if (call != NULL)
+	if (call)
 		call(level, statid, priv_data);
 	else
 		printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n",
@@ -1374,7 +1350,7 @@ int vme_irq_request(struct vme_dev *vdev, int level, int statid,
 	struct vme_bridge *bridge;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}
@@ -1384,7 +1360,7 @@ int vme_irq_request(struct vme_dev *vdev, int level, int statid,
 		return -EINVAL;
 	}
 
-	if (bridge->irq_set == NULL) {
+	if (!bridge->irq_set) {
 		printk(KERN_ERR "Configuring interrupts not supported\n");
 		return -EINVAL;
 	}
@@ -1423,7 +1399,7 @@ void vme_irq_free(struct vme_dev *vdev, int level, int statid)
 	struct vme_bridge *bridge;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return;
 	}
@@ -1433,7 +1409,7 @@ void vme_irq_free(struct vme_dev *vdev, int level, int statid)
 		return;
 	}
 
-	if (bridge->irq_set == NULL) {
+	if (!bridge->irq_set) {
 		printk(KERN_ERR "Configuring interrupts not supported\n");
 		return;
 	}
@@ -1470,7 +1446,7 @@ int vme_irq_generate(struct vme_dev *vdev, int level, int statid)
 	struct vme_bridge *bridge;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}
@@ -1480,7 +1456,7 @@ int vme_irq_generate(struct vme_dev *vdev, int level, int statid)
 		return -EINVAL;
 	}
 
-	if (bridge->irq_generate == NULL) {
+	if (!bridge->irq_generate) {
 		printk(KERN_WARNING "Interrupt generation not supported\n");
 		return -EINVAL;
 	}
@@ -1508,7 +1484,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	struct vme_resource *resource = NULL;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@@ -1517,8 +1493,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	list_for_each(lm_pos, &bridge->lm_resources) {
 		lm = list_entry(lm_pos,
 			struct vme_lm_resource, list);
-
-		if (lm == NULL) {
+		if (!lm) {
 			printk(KERN_ERR "Registered NULL Location Monitor resource\n");
 			continue;
 		}
@@ -1535,14 +1510,13 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	}
 
 	/* Check to see if we found a resource */
-	if (allocated_lm == NULL)
+	if (!allocated_lm)
 		goto err_lm;
 
-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_ERR "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_LM;
 	resource->entry = &allocated_lm->list;
 
@@ -1612,7 +1586,7 @@ int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base,
 
 	lm = list_entry(resource->entry, struct vme_lm_resource, list);
 
-	if (bridge->lm_set == NULL) {
+	if (!bridge->lm_set) {
 		printk(KERN_ERR "vme_lm_set not supported\n");
 		return -EINVAL;
 	}
@@ -1648,7 +1622,7 @@ int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base,
 
 	lm = list_entry(resource->entry, struct vme_lm_resource, list);
 
-	if (bridge->lm_get == NULL) {
+	if (!bridge->lm_get) {
 		printk(KERN_ERR "vme_lm_get not supported\n");
 		return -EINVAL;
 	}
@@ -1685,7 +1659,7 @@ int vme_lm_attach(struct vme_resource *resource, int monitor,
 
 	lm = list_entry(resource->entry, struct vme_lm_resource, list);
 
-	if (bridge->lm_attach == NULL) {
+	if (!bridge->lm_attach) {
 		printk(KERN_ERR "vme_lm_attach not supported\n");
 		return -EINVAL;
 	}
@@ -1718,7 +1692,7 @@ int vme_lm_detach(struct vme_resource *resource, int monitor)
 
 	lm = list_entry(resource->entry, struct vme_lm_resource, list);
 
-	if (bridge->lm_detach == NULL) {
+	if (!bridge->lm_detach) {
 		printk(KERN_ERR "vme_lm_detach not supported\n");
 		return -EINVAL;
 	}
@@ -1780,12 +1754,12 @@ int vme_slot_num(struct vme_dev *vdev)
 	struct vme_bridge *bridge;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}
 
-	if (bridge->slot_get == NULL) {
+	if (!bridge->slot_get) {
 		printk(KERN_WARNING "vme_slot_num not supported\n");
 		return -EINVAL;
 	}
@@ -1808,7 +1782,7 @@ int vme_bus_num(struct vme_dev *vdev)
 	struct vme_bridge *bridge;
 
 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		pr_err("Can't find VME bus\n");
 		return -EINVAL;
 	}
@@ -1888,7 +1862,7 @@ static int __vme_register_driver_bus(struct vme_driver *drv,
 	struct vme_dev *tmp;
 
 	for (i = 0; i < ndevs; i++) {
-		vdev = kzalloc(sizeof(struct vme_dev), GFP_KERNEL);
+		vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 		if (!vdev) {
 			err = -ENOMEM;
 			goto err_devalloc;
@@ -2020,30 +1994,26 @@ static int vme_bus_match(struct device *dev, struct device_driver *drv)
 
 static int vme_bus_probe(struct device *dev)
 {
-	int retval = -ENODEV;
 	struct vme_driver *driver;
 	struct vme_dev *vdev = dev_to_vme_dev(dev);
 
 	driver = dev->platform_data;
+	if (driver->probe)
+		return driver->probe(vdev);
 
-	if (driver->probe != NULL)
-		retval = driver->probe(vdev);
-
-	return retval;
+	return -ENODEV;
 }
 
 static int vme_bus_remove(struct device *dev)
 {
-	int retval = -ENODEV;
 	struct vme_driver *driver;
 	struct vme_dev *vdev = dev_to_vme_dev(dev);
 
 	driver = dev->platform_data;
+	if (driver->remove)
+		return driver->remove(vdev);
 
-	if (driver->remove != NULL)
-		retval = driver->remove(vdev);
-
-	return retval;
+	return -ENODEV;
 }
 
 struct bus_type vme_bus_type = {

drivers/w1/slaves/Kconfig

@@ -148,4 +148,19 @@ config W1_SLAVE_DS28E04
 
 	  If you are unsure, say N.
 
+config W1_SLAVE_DS28E17
+	tristate "1-wire-to-I2C master bridge (DS28E17)"
+	select CRC16
+	depends on I2C
+	help
+	  Say Y here if you want to use the DS28E17 1-wire-to-I2C master bridge.
+	  For each DS28E17 detected, a new I2C adapter is created within the
+	  kernel. I2C devices on that bus can be configured to be used by the
+	  kernel and userspace tools as on any other "native" I2C bus.
+
+	  This driver is also available as a module. If so, the module
+	  will be called w1_ds28e17.
+
+	  If you are unsure, say N.
+
 endmenu

drivers/w1/slaves/Makefile

@@ -18,3 +18,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
+obj-$(CONFIG_W1_SLAVE_DS28E17)	+= w1_ds28e17.o

drivers/w1/slaves/w1_ds28e17.c

@@ -0,0 +1,771 @@
+/*
+ *	w1_ds28e17.c - w1 family 19 (DS28E17) driver
+ *
+ * Copyright (c) 2016 Jan Kandziora <jjj@gmx.de>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/crc16.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#define CRC16_INIT 0
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E17 0x19
+
+/* Module setup. */
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jan Kandziora <jjj@gmx.de>");
+MODULE_DESCRIPTION("w1 family 19 driver for DS28E17, 1-wire to I2C master bridge");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17));
+
+
+/* Default I2C speed to be set when a DS28E17 is detected. */
+static int i2c_speed = 100;
+module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected");
+
+/* Default I2C stretch value to be set when a DS28E17 is detected. */
+static char i2c_stretch = 1;
+module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected");
+
+/* DS28E17 device command codes. */
+#define W1_F19_WRITE_DATA_WITH_STOP      0x4B
+#define W1_F19_WRITE_DATA_NO_STOP        0x5A
+#define W1_F19_WRITE_DATA_ONLY           0x69
+#define W1_F19_WRITE_DATA_ONLY_WITH_STOP 0x78
+#define W1_F19_READ_DATA_WITH_STOP       0x87
+#define W1_F19_WRITE_READ_DATA_WITH_STOP 0x2D
+#define W1_F19_WRITE_CONFIGURATION       0xD2
+#define W1_F19_READ_CONFIGURATION        0xE1
+#define W1_F19_ENABLE_SLEEP_MODE         0x1E
+#define W1_F19_READ_DEVICE_REVISION      0xC4
+
+/* DS28E17 status bits */
+#define W1_F19_STATUS_CRC     0x01
+#define W1_F19_STATUS_ADDRESS 0x02
+#define W1_F19_STATUS_START   0x08
+
+/*
+ * Maximum number of I2C bytes to transfer within one CRC16 protected onewire
+ * command.
+ * */
+#define W1_F19_WRITE_DATA_LIMIT 255
+
+/* Maximum number of I2C bytes to read with one onewire command. */
+#define W1_F19_READ_DATA_LIMIT 255
+
+/* Constants for calculating the busy sleep. */
+#define W1_F19_BUSY_TIMEBASES { 90, 23, 10 }
+#define W1_F19_BUSY_GRATUITY  1000
+
+/* Number of checks for the busy flag before timeout. */
+#define W1_F19_BUSY_CHECKS 1000
+
+
+/* Slave specific data. */
+struct w1_f19_data {
+	u8 speed;
+	u8 stretch;
+	struct i2c_adapter adapter;
+};
+
+
+/* Wait a while until the busy flag clears. */
+static int w1_f19_i2c_busy_wait(struct w1_slave *sl, size_t count)
+{
+	const unsigned long timebases[3] = W1_F19_BUSY_TIMEBASES;
+	struct w1_f19_data *data = sl->family_data;
+	unsigned int checks;
+
+	/* Check the busy flag first in any case.*/
+	if (w1_touch_bit(sl->master, 1) == 0)
+		return 0;
+
+	/*
+	 * Do a generously long sleep in the beginning,
+	 * as we have to wait at least this time for all
+	 * the I2C bytes at the given speed to be transferred.
+	 */
+	usleep_range(timebases[data->speed] * (data->stretch) * count,
+		timebases[data->speed] * (data->stretch) * count
+		+ W1_F19_BUSY_GRATUITY);
+
+	/* Now continusly check the busy flag sent by the DS28E17. */
+	checks = W1_F19_BUSY_CHECKS;
+	while ((checks--) > 0) {
+		/* Return success if the busy flag is cleared. */
+		if (w1_touch_bit(sl->master, 1) == 0)
+			return 0;
+
+		/* Wait one non-streched byte timeslot. */
+		udelay(timebases[data->speed]);
+	}
+
+	/* Timeout. */
+	dev_warn(&sl->dev, "busy timeout\n");
+	return -ETIMEDOUT;
+}
+
+
+/* Utility function: result. */
+static size_t w1_f19_error(struct w1_slave *sl, u8 w1_buf[])
+{
+	/* Warnings. */
+	if (w1_buf[0] & W1_F19_STATUS_CRC)
+		dev_warn(&sl->dev, "crc16 mismatch\n");
+	if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+		dev_warn(&sl->dev, "i2c device not responding\n");
+	if ((w1_buf[0] & (W1_F19_STATUS_CRC | W1_F19_STATUS_ADDRESS)) == 0
+			&& w1_buf[1] != 0) {
+		dev_warn(&sl->dev, "i2c short write, %d bytes not acknowledged\n",
+			w1_buf[1]);
+	}
+
+	/* Check error conditions. */
+	if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+		return -ENXIO;
+	if (w1_buf[0] & W1_F19_STATUS_START)
+		return -EAGAIN;
+	if (w1_buf[0] != 0 || w1_buf[1] != 0)
+		return -EIO;
+
+	/* All ok. */
+	return 0;
+}
+
+
+/* Utility function: write data to I2C slave, single chunk. */
+static int __w1_f19_i2c_write(struct w1_slave *sl,
+	const u8 *command, size_t command_count,
+	const u8 *buffer, size_t count)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[2];
+
+	/* Send command and I2C data to DS28E17. */
+	crc = crc16(CRC16_INIT, command, command_count);
+	w1_write_block(sl->master, command, command_count);
+
+	w1_buf[0] = count;
+	crc = crc16(crc, w1_buf, 1);
+	w1_write_8(sl->master, w1_buf[0]);
+
+	crc = crc16(crc, buffer, count);
+	w1_write_block(sl->master, buffer, count);
+
+	w1_buf[0] = ~(crc & 0xFF);
+	w1_buf[1] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 2);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_read_block(sl->master, w1_buf, 2);
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Return number of bytes written. */
+	return count;
+}
+
+
+/* Write data to I2C slave. */
+static int w1_f19_i2c_write(struct w1_slave *sl, u16 i2c_address,
+	const u8 *buffer, size_t count, bool stop)
+{
+	int result;
+	int remaining = count;
+	const u8 *p;
+	u8 command[2];
+
+	/* Check input. */
+	if (count == 0)
+		return -EOPNOTSUPP;
+
+	/* Check whether we need multiple commands. */
+	if (count <= W1_F19_WRITE_DATA_LIMIT) {
+		/*
+		 * Small data amount. Data can be sent with
+		 * a single onewire command.
+		 */
+
+		/* Send all data to DS28E17. */
+		command[0] = (stop ? W1_F19_WRITE_DATA_WITH_STOP
+			: W1_F19_WRITE_DATA_NO_STOP);
+		command[1] = i2c_address << 1;
+		result = __w1_f19_i2c_write(sl, command, 2, buffer, count);
+	} else {
+		/* Large data amount. Data has to be sent in multiple chunks. */
+
+		/* Send first chunk to DS28E17. */
+		p = buffer;
+		command[0] = W1_F19_WRITE_DATA_NO_STOP;
+		command[1] = i2c_address << 1;
+		result = __w1_f19_i2c_write(sl, command, 2, p,
+			W1_F19_WRITE_DATA_LIMIT);
+		if (result < 0)
+			return result;
+
+		/* Resume to same DS28E17. */
+		if (w1_reset_resume_command(sl->master))
+			return -EIO;
+
+		/* Next data chunk. */
+		p += W1_F19_WRITE_DATA_LIMIT;
+		remaining -= W1_F19_WRITE_DATA_LIMIT;
+
+		while (remaining > W1_F19_WRITE_DATA_LIMIT) {
+			/* Send intermediate chunk to DS28E17. */
+			command[0] = W1_F19_WRITE_DATA_ONLY;
+			result = __w1_f19_i2c_write(sl, command, 1, p,
+					W1_F19_WRITE_DATA_LIMIT);
+			if (result < 0)
+				return result;
+
+			/* Resume to same DS28E17. */
+			if (w1_reset_resume_command(sl->master))
+				return -EIO;
+
+			/* Next data chunk. */
+			p += W1_F19_WRITE_DATA_LIMIT;
+			remaining -= W1_F19_WRITE_DATA_LIMIT;
+		}
+
+		/* Send final chunk to DS28E17. */
+		command[0] = (stop ? W1_F19_WRITE_DATA_ONLY_WITH_STOP
+			: W1_F19_WRITE_DATA_ONLY);
+		result = __w1_f19_i2c_write(sl, command, 1, p, remaining);
+	}
+
+	return result;
+}
+
+
+/* Read data from I2C slave. */
+static int w1_f19_i2c_read(struct w1_slave *sl, u16 i2c_address,
+	u8 *buffer, size_t count)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[5];
+
+	/* Check input. */
+	if (count == 0)
+		return -EOPNOTSUPP;
+
+	/* Send command to DS28E17. */
+	w1_buf[0] = W1_F19_READ_DATA_WITH_STOP;
+	w1_buf[1] = i2c_address << 1 | 0x01;
+	w1_buf[2] = count;
+	crc = crc16(CRC16_INIT, w1_buf, 3);
+	w1_buf[3] = ~(crc & 0xFF);
+	w1_buf[4] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 5);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_buf[0] = w1_read_8(sl->master);
+	w1_buf[1] = 0;
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Read received I2C data from DS28E17. */
+	return w1_read_block(sl->master, buffer, count);
+}
+
+
+/* Write to, then read data from I2C slave. */
+static int w1_f19_i2c_write_read(struct w1_slave *sl, u16 i2c_address,
+	const u8 *wbuffer, size_t wcount, u8 *rbuffer, size_t rcount)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[3];
+
+	/* Check input. */
+	if (wcount == 0 || rcount == 0)
+		return -EOPNOTSUPP;
+
+	/* Send command and I2C data to DS28E17. */
+	w1_buf[0] = W1_F19_WRITE_READ_DATA_WITH_STOP;
+	w1_buf[1] = i2c_address << 1;
+	w1_buf[2] = wcount;
+	crc = crc16(CRC16_INIT, w1_buf, 3);
+	w1_write_block(sl->master, w1_buf, 3);
+
+	crc = crc16(crc, wbuffer, wcount);
+	w1_write_block(sl->master, wbuffer, wcount);
+
+	w1_buf[0] = rcount;
+	crc = crc16(crc, w1_buf, 1);
+	w1_buf[1] = ~(crc & 0xFF);
+	w1_buf[2] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 3);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, wcount + rcount + 2) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_read_block(sl->master, w1_buf, 2);
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Read received I2C data from DS28E17. */
+	return w1_read_block(sl->master, rbuffer, rcount);
+}
+
+
+/* Do an I2C master transfer. */
+static int w1_f19_i2c_master_transfer(struct i2c_adapter *adapter,
+	struct i2c_msg *msgs, int num)
+{
+	struct w1_slave *sl = (struct w1_slave *) adapter->algo_data;
+	int i = 0;
+	int result = 0;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Select DS28E17. */
+	if (w1_reset_select_slave(sl)) {
+		i = -EIO;
+		goto error;
+	}
+
+	/* Loop while there are still messages to transfer. */
+	while (i < num) {
+		/*
+		 * Check for special case: Small write followed
+		 * by read to same I2C device.
+		 */
+		if (i < (num-1)
+			&& msgs[i].addr == msgs[i+1].addr
+			&& !(msgs[i].flags & I2C_M_RD)
+			&& (msgs[i+1].flags & I2C_M_RD)
+			&& (msgs[i].len <= W1_F19_WRITE_DATA_LIMIT)) {
+			/*
+			 * The DS28E17 has a combined transfer
+			 * for small write+read.
+			 */
+			result = w1_f19_i2c_write_read(sl, msgs[i].addr,
+				msgs[i].buf, msgs[i].len,
+				msgs[i+1].buf, msgs[i+1].len);
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+
+			/*
+			 * Check if we should interpret the read data
+			 * as a length byte. The DS28E17 unfortunately
+			 * has no read without stop, so we can just do
+			 * another simple read in that case.
+			 */
+			if (msgs[i+1].flags & I2C_M_RECV_LEN) {
+				result = w1_f19_i2c_read(sl, msgs[i+1].addr,
+					&(msgs[i+1].buf[1]), msgs[i+1].buf[0]);
+				if (result < 0) {
+					i = result;
+					goto error;
+				}
+			}
+
+			/* Eat up read message, too. */
+			i++;
+		} else if (msgs[i].flags & I2C_M_RD) {
+			/* Read transfer. */
+			result = w1_f19_i2c_read(sl, msgs[i].addr,
+				msgs[i].buf, msgs[i].len);
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+
+			/*
+			 * Check if we should interpret the read data
+			 * as a length byte. The DS28E17 unfortunately
+			 * has no read without stop, so we can just do
+			 * another simple read in that case.
+			 */
+			if (msgs[i].flags & I2C_M_RECV_LEN) {
+				result = w1_f19_i2c_read(sl,
+					msgs[i].addr,
+					&(msgs[i].buf[1]),
+					msgs[i].buf[0]);
+				if (result < 0) {
+					i = result;
+					goto error;
+				}
+			}
+		} else {
+			/*
+			 * Write transfer.
+			 * Stop condition only for last
+			 * transfer.
+			 */
+			result = w1_f19_i2c_write(sl,
+				msgs[i].addr,
+				msgs[i].buf,
+				msgs[i].len,
+				i == (num-1));
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+		}
+
+		/* Next message. */
+		i++;
+
+		/* Are there still messages to send/receive? */
+		if (i < num) {
+			/* Yes. Resume to same DS28E17. */
+			if (w1_reset_resume_command(sl->master)) {
+				i = -EIO;
+				goto error;
+			}
+		}
+	}
+
+error:
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	/* Return number of messages processed or error. */
+	return i;
+}
+
+
+/* Get I2C adapter functionality. */
+static u32 w1_f19_i2c_functionality(struct i2c_adapter *adapter)
+{
+	/*
+	 * Plain I2C functions only.
+	 * SMBus is emulated by the kernel's I2C layer.
+	 * No "I2C_FUNC_SMBUS_QUICK"
+	 * No "I2C_FUNC_SMBUS_READ_BLOCK_DATA"
+	 * No "I2C_FUNC_SMBUS_BLOCK_PROC_CALL"
+	 */
+	return I2C_FUNC_I2C |
+		I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL |
+		I2C_FUNC_SMBUS_WRITE_BLOCK_DATA |
+		I2C_FUNC_SMBUS_I2C_BLOCK |
+		I2C_FUNC_SMBUS_PEC;
+}
+
+
+/* I2C adapter quirks. */
+static const struct i2c_adapter_quirks w1_f19_i2c_adapter_quirks = {
+	.max_read_len = W1_F19_READ_DATA_LIMIT,
+};
+
+/* I2C algorithm. */
+static const struct i2c_algorithm w1_f19_i2c_algorithm = {
+	.master_xfer    = w1_f19_i2c_master_transfer,
+	.functionality  = w1_f19_i2c_functionality,
+};
+
+
+/* Read I2C speed from DS28E17. */
+static int w1_f19_get_i2c_speed(struct w1_slave *sl)
+{
+	struct w1_f19_data *data = sl->family_data;
+	int result = -EIO;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Select slave. */
+	if (w1_reset_select_slave(sl))
+		goto error;
+
+	/* Read slave configuration byte. */
+	w1_write_8(sl->master, W1_F19_READ_CONFIGURATION);
+	result = w1_read_8(sl->master);
+	if (result < 0 || result > 2) {
+		result = -EIO;
+		goto error;
+	}
+
+	/* Update speed in slave specific data. */
+	data->speed = result;
+
+error:
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return result;
+}
+
+
+/* Set I2C speed on DS28E17. */
+static int __w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+	struct w1_f19_data *data = sl->family_data;
+	const int i2c_speeds[3] = { 100, 400, 900 };
+	u8 w1_buf[2];
+
+	/* Select slave. */
+	if (w1_reset_select_slave(sl))
+		return -EIO;
+
+	w1_buf[0] = W1_F19_WRITE_CONFIGURATION;
+	w1_buf[1] = speed;
+	w1_write_block(sl->master, w1_buf, 2);
+
+	/* Update speed in slave specific data. */
+	data->speed = speed;
+
+	dev_info(&sl->dev, "i2c speed set to %d kBaud\n", i2c_speeds[speed]);
+
+	return 0;
+}
+
+static int w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+	int result;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Set I2C speed on DS28E17. */
+	result = __w1_f19_set_i2c_speed(sl, speed);
+
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return result;
+}
+
+
+/* Sysfs attributes. */
+
+/* I2C speed attribute for a single chip. */
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	int result;
+
+	/* Read current speed from slave. Updates data->speed. */
+	result = w1_f19_get_i2c_speed(sl);
+	if (result < 0)
+		return result;
+
+	/* Return current speed value. */
+	return sprintf(buf, "%d\n", result);
+}
+
+static ssize_t speed_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	int error;
+
+	/* Valid values are: "100", "400", "900" */
+	if (count < 3 || count > 4 || !buf)
+		return -EINVAL;
+	if (count == 4 && buf[3] != '\n')
+		return -EINVAL;
+	if (buf[1] != '0' || buf[2] != '0')
+		return -EINVAL;
+
+	/* Set speed on slave. */
+	switch (buf[0]) {
+	case '1':
+		error = w1_f19_set_i2c_speed(sl, 0);
+		break;
+	case '4':
+		error = w1_f19_set_i2c_speed(sl, 1);
+		break;
+	case '9':
+		error = w1_f19_set_i2c_speed(sl, 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (error < 0)
+		return error;
+
+	/* Return bytes written. */
+	return count;
+}
+
+static DEVICE_ATTR_RW(speed);
+
+
+/* Busy stretch attribute for a single chip. */
+static ssize_t stretch_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	struct w1_f19_data *data = sl->family_data;
+
+	/* Return current stretch value. */
+	return sprintf(buf, "%d\n", data->stretch);
+}
+
+static ssize_t stretch_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	struct w1_f19_data *data = sl->family_data;
+
+	/* Valid values are '1' to '9' */
+	if (count < 1 || count > 2 || !buf)
+		return -EINVAL;
+	if (count == 2 && buf[1] != '\n')
+		return -EINVAL;
+	if (buf[0] < '1' || buf[0] > '9')
+		return -EINVAL;
+
+	/* Set busy stretch value. */
+	data->stretch = buf[0] & 0x0F;
+
+	/* Return bytes written. */
+	return count;
+}
+
+static DEVICE_ATTR_RW(stretch);
+
+
+/* All attributes. */
+static struct attribute *w1_f19_attrs[] = {
+	&dev_attr_speed.attr,
+	&dev_attr_stretch.attr,
+	NULL,
+};
+
+static const struct attribute_group w1_f19_group = {
+	.attrs		= w1_f19_attrs,
+};
+
+static const struct attribute_group *w1_f19_groups[] = {
+	&w1_f19_group,
+	NULL,
+};
+
+
+/* Slave add and remove functions. */
+static int w1_f19_add_slave(struct w1_slave *sl)
+{
+	struct w1_f19_data *data = NULL;
+
+	/* Allocate memory for slave specific data. */
+	data = devm_kzalloc(&sl->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	sl->family_data = data;
+
+	/* Setup default I2C speed on slave. */
+	switch (i2c_speed) {
+	case 100:
+		__w1_f19_set_i2c_speed(sl, 0);
+		break;
+	case 400:
+		__w1_f19_set_i2c_speed(sl, 1);
+		break;
+	case 900:
+		__w1_f19_set_i2c_speed(sl, 2);
+		break;
+	default:
+		/*
+		 * A i2c_speed module parameter of anything else
+		 * than 100, 400, 900 means not to touch the
+		 * speed of the DS28E17.
+		 * We assume 400kBaud, the power-on value.
+		 */
+		data->speed = 1;
+	}
+
+	/*
+	 * Setup default busy stretch
+	 * configuration for the DS28E17.
+	 */
+	data->stretch = i2c_stretch;
+
+	/* Setup I2C adapter. */
+	data->adapter.owner      = THIS_MODULE;
+	data->adapter.algo       = &w1_f19_i2c_algorithm;
+	data->adapter.algo_data  = sl;
+	strcpy(data->adapter.name, "w1-");
+	strcat(data->adapter.name, sl->name);
+	data->adapter.dev.parent = &sl->dev;
+	data->adapter.quirks     = &w1_f19_i2c_adapter_quirks;
+
+	return i2c_add_adapter(&data->adapter);
+}
+
+static void w1_f19_remove_slave(struct w1_slave *sl)
+{
+	struct w1_f19_data *family_data = sl->family_data;
+
+	/* Delete I2C adapter. */
+	i2c_del_adapter(&family_data->adapter);
+
+	/* Free slave specific data. */
+	devm_kfree(&sl->dev, family_data);
+	sl->family_data = NULL;
+}
+
+
+/* Declarations within the w1 subsystem. */
+static struct w1_family_ops w1_f19_fops = {
+	.add_slave = w1_f19_add_slave,
+	.remove_slave = w1_f19_remove_slave,
+	.groups = w1_f19_groups,
+};
+
+static struct w1_family w1_family_19 = {
+	.fid = W1_FAMILY_DS28E17,
+	.fops = &w1_f19_fops,
+};
+
+
+/* Module init and remove functions. */
+static int __init w1_f19_init(void)
+{
+	return w1_register_family(&w1_family_19);
+}
+
+static void __exit w1_f19_fini(void)
+{
+	w1_unregister_family(&w1_family_19);
+}
+
+module_init(w1_f19_init);
+module_exit(w1_f19_fini);
+

drivers/w1/slaves/w1_therm.c

@@ -268,17 +268,18 @@ static inline int w1_therm_eeprom(struct device *device)
 	int ret, max_trying = 10;
 	u8 *family_data = sl->family_data;
 
-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto post_unlock;
-
 	if (!sl->family_data) {
 		ret = -ENODEV;
-		goto pre_unlock;
+		goto error;
 	}
 
 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(rom, 0, sizeof(rom));
 
 	while (max_trying--) {
@@ -306,17 +307,17 @@ static inline int w1_therm_eeprom(struct device *device)
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto post_unlock;
+					goto dec_refcnt;
 				}
 
 				ret = mutex_lock_interruptible(&dev->bus_mutex);
 				if (ret != 0)
-					goto post_unlock;
+					goto dec_refcnt;
 			} else if (!w1_strong_pullup) {
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto pre_unlock;
+					goto mt_unlock;
 				}
 			}
 
@@ -324,11 +325,11 @@ static inline int w1_therm_eeprom(struct device *device)
 		}
 	}
 
-pre_unlock:
+mt_unlock:
 	mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
 	atomic_dec(THERM_REFCNT(family_data));
+error:
 	return ret;
 }
 
@@ -350,20 +351,22 @@ static inline int w1_DS18B20_precision(struct device *device, int val)
 
 	if (val > 12 || val < 9) {
 		pr_warn("Unsupported precision\n");
-		return -1;
+		ret = -EINVAL;
+		goto error;
 	}
 
-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto post_unlock;
-
 	if (!sl->family_data) {
 		ret = -ENODEV;
-		goto pre_unlock;
+		goto error;
 	}
 
 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(rom, 0, sizeof(rom));
 
 	/* translate precision to bitmask (see datasheet page 9) */
@@ -411,11 +414,10 @@ static inline int w1_DS18B20_precision(struct device *device, int val)
 		}
 	}
 
-pre_unlock:
 	mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
 	atomic_dec(THERM_REFCNT(family_data));
+error:
 	return ret;
 }
 
@@ -490,17 +492,18 @@ static ssize_t read_therm(struct device *device,
 	int ret, max_trying = 10;
 	u8 *family_data = sl->family_data;
 
-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto error;
-
 	if (!family_data) {
 		ret = -ENODEV;
-		goto mt_unlock;
+		goto error;
 	}
 
 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(info->rom, 0, sizeof(info->rom));
 
 	while (max_trying--) {
@@ -542,7 +545,7 @@ static ssize_t read_therm(struct device *device,
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto dec_refcnt;
+					goto mt_unlock;
 				}
 			}
 
@@ -567,10 +570,10 @@ static ssize_t read_therm(struct device *device,
 			break;
 	}
 
-dec_refcnt:
-	atomic_dec(THERM_REFCNT(family_data));
 mt_unlock:
 	mutex_unlock(&dev->bus_mutex);
+dec_refcnt:
+	atomic_dec(THERM_REFCNT(family_data));
 error:
 	return ret;
 }

drivers/w1/w1_io.c

@@ -58,7 +58,7 @@ static u8 w1_read_bit(struct w1_master *dev);
  * @dev:	the master device
  * @bit:	0 - write a 0, 1 - write a 0 read the level
  */
-static u8 w1_touch_bit(struct w1_master *dev, int bit)
+u8 w1_touch_bit(struct w1_master *dev, int bit)
 {
 	if (dev->bus_master->touch_bit)
 		return dev->bus_master->touch_bit(dev->bus_master->data, bit);
@@ -69,6 +69,7 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
 		return 0;
 	}
 }
+EXPORT_SYMBOL_GPL(w1_touch_bit);
 
 /**
  * w1_write_bit() - Generates a write-0 or write-1 cycle.

include/linux/hyperv.h

@@ -719,6 +719,10 @@ struct vmbus_channel {
 
 	struct vmbus_close_msg close_msg;
 
+	/* Statistics */
+	u64	interrupts;	/* Host to Guest interrupts */
+	u64	sig_events;	/* Guest to Host events */
+
 	/* Channel callback's invoked in softirq context */
 	struct tasklet_struct callback_event;
 	void (*onchannel_callback)(void *context);
@@ -828,6 +832,11 @@ struct vmbus_channel {
 	 */
 	struct rcu_head rcu;
 
+	/*
+	 * For sysfs per-channel properties.
+	 */
+	struct kobject			kobj;
+
 	/*
 	 * For performance critical channels (storage, networking
 	 * etc,), Hyper-V has a mechanism to enhance the throughput
@@ -1089,6 +1098,7 @@ struct hv_device {
 	struct device device;
 
 	struct vmbus_channel *channel;
+	struct kset	     *channels_kset;
 };
 
 

include/linux/w1.h

@@ -293,6 +293,7 @@ void w1_unregister_family(struct w1_family *family);
 			w1_unregister_family)
 
 u8 w1_triplet(struct w1_master *dev, int bdir);
+u8 w1_touch_bit(struct w1_master *dev, int bit);
 void w1_write_8(struct w1_master *, u8);
 u8 w1_read_8(struct w1_master *);
 int w1_reset_bus(struct w1_master *);