[media] marvell-ccic: fix Y'CbCr ordering

Various formats had their byte ordering implemented incorrectly, and
the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you
get V4L2_PIX_FMT_YVYU.

This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1
("add new formats support for marvell-ccic driver"). That commit broke
the original format support and the OLPC XO-1 laptop showed wrong
colors ever since (if you are crazy enough to attempt to run the latest
kernel on it, like I did).

The email addresses of the authors of that patch are no longer valid,
so without a way to reach them and ask them about their test setup
I am going with what I can test on the OLPC laptop.

If this breaks something for someone on their non-OLPC setup, then
contact the linux-media mailinglist. My suspicion however is that
that commit went in untested.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>      # for v3.19 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/marvell-ccic/mcam-core.c

@@ -116,8 +116,8 @@ static struct mcam_format_struct {
 		.planar		= false,
 	},
 	{
-		.desc		= "UYVY 4:2:2",
-		.pixelformat	= V4L2_PIX_FMT_UYVY,
+		.desc		= "YVYU 4:2:2",
+		.pixelformat	= V4L2_PIX_FMT_YVYU,
 		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
 		.bpp		= 2,
 		.planar		= false,
@@ -748,7 +748,7 @@ static void mcam_ctlr_image(struct mcam_camera *cam)
 
 	switch (fmt->pixelformat) {
 	case V4L2_PIX_FMT_YUYV:
-	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_YVYU:
 		widthy = fmt->width * 2;
 		widthuv = 0;
 		break;
@@ -784,15 +784,15 @@ static void mcam_ctlr_image(struct mcam_camera *cam)
 	case V4L2_PIX_FMT_YUV420:
 	case V4L2_PIX_FMT_YVU420:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_420PL | C0_YUVE_YVYU, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_420PL | C0_YUVE_VYUY, C0_DF_MASK);
 		break;
 	case V4L2_PIX_FMT_YUYV:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_UYVY, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_NOSWAP, C0_DF_MASK);
 		break;
-	case V4L2_PIX_FMT_UYVY:
+	case V4L2_PIX_FMT_YVYU:
 		mcam_reg_write_mask(cam, REG_CTRL0,
-			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_YUYV, C0_DF_MASK);
+			C0_DF_YUV | C0_YUV_PACKED | C0_YUVE_SWAP24, C0_DF_MASK);
 		break;
 	case V4L2_PIX_FMT_JPEG:
 		mcam_reg_write_mask(cam, REG_CTRL0,

drivers/media/platform/marvell-ccic/mcam-core.h

@@ -330,10 +330,10 @@ int mccic_resume(struct mcam_camera *cam);
 #define	  C0_YUVE_YVYU	  0x00010000	/* Y1CrY0Cb		*/
 #define	  C0_YUVE_VYUY	  0x00020000	/* CrY1CbY0		*/
 #define	  C0_YUVE_UYVY	  0x00030000	/* CbY1CrY0		*/
-#define	  C0_YUVE_XYUV	  0x00000000	/* 420: .YUV		*/
-#define	  C0_YUVE_XYVU	  0x00010000	/* 420: .YVU		*/
-#define	  C0_YUVE_XUVY	  0x00020000	/* 420: .UVY		*/
-#define	  C0_YUVE_XVUY	  0x00030000	/* 420: .VUY		*/
+#define	  C0_YUVE_NOSWAP  0x00000000	/* no bytes swapping	*/
+#define	  C0_YUVE_SWAP13  0x00010000	/* swap byte 1 and 3	*/
+#define	  C0_YUVE_SWAP24  0x00020000	/* swap byte 2 and 4	*/
+#define	  C0_YUVE_SWAP1324 0x00030000	/* swap bytes 1&3 and 2&4 */
 /* Bayer bits 18,19 if needed */
 #define	  C0_EOF_VSYNC	  0x00400000	/* Generate EOF by VSYNC */
 #define	  C0_VEDGE_CTRL   0x00800000	/* Detect falling edge of VSYNC */