mmc: dw_mmc: Power on vqmmc in MMC_POWER_ON, not MMC_POWER_UP

If we power up vqmmc in MMC_POWER_ON then we end up turning it on
before mmc_power_up() sets the signal voltage.  That's not so great
since we might be powering it up at the wrong voltage.

Note that this is how Yuvaraj originally coded things up in
<https://patchwork.kernel.org/patch/4401231/> but he changed it on my
suggestion.  Apparently I was wrong.

Reported-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/dw_mmc.c

@@ -1119,6 +1119,12 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 				return;
 			}
 		}
+		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
+		regs = mci_readl(slot->host, PWREN);
+		regs |= (1 << slot->id);
+		mci_writel(slot->host, PWREN, regs);
+		break;
+	case MMC_POWER_ON:
 		if (!IS_ERR(mmc->supply.vqmmc) && !slot->host->vqmmc_enabled) {
 			ret = regulator_enable(mmc->supply.vqmmc);
 			if (ret < 0)
@@ -1127,10 +1133,6 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 			else
 				slot->host->vqmmc_enabled = true;
 		}
-		set_bit(DW_MMC_CARD_NEED_INIT, &slot->flags);
-		regs = mci_readl(slot->host, PWREN);
-		regs |= (1 << slot->id);
-		mci_writel(slot->host, PWREN, regs);
 		break;
 	case MMC_POWER_OFF:
 		if (!IS_ERR(mmc->supply.vmmc))