Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

Documentation/admin-guide/kernel-parameters.txt

@@ -854,7 +854,7 @@
 			The filter can be disabled or changed to another
 			driver later using sysfs.
 
-	drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
+	drm.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
 			Broken monitors, graphic adapters, KVMs and EDIDless
 			panels may send no or incorrect EDID data sets.
 			This parameter allows to specify an EDID data sets

Documentation/devicetree/bindings/display/faraday,tve200.txt

@@ -0,0 +1,54 @@
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+	This port should have the properties:
+	reg = <0>;
+	It should have one endpoint connected to a remote endpoint where
+	the display is connected.
+
+Example:
+
+display-controller@6a000000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+
+	port@0 {
+		reg = <0>;
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};

Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt

@@ -0,0 +1,21 @@
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+  - compatible: "orisetech,otm8009a"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+	};
+};

Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt

@@ -0,0 +1,24 @@
+Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
+
+Required properties:
+  - compatible: "samsung,s6e63j0x03"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+	};
+};

Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt

@@ -0,0 +1,23 @@
+Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+Required properties:
+- compatible: should be "sii,43wvf1g".
+- "dvdd-supply": 3v3 digital regulator.
+- "avdd-supply": 5v analog regulator.
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+Example:
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};

Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt

@@ -0,0 +1,99 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+	- "rockchip,rk3288-lvds";
+
+- reg: physical base address of the controller and length
+	of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+	clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+	Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+the lvds panel described by
+	Documentation/devicetree/bindings/display/panel/simple-panel.txt
+
+Panel required properties:
+- ports for remote LVDS output
+
+Panel optional properties:
+- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
+This describes decribed by:
+	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+
+Example:
+
+lvds_panel: lvds-panel {
+	compatible = "auo,b101ean01";
+	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	data-mapping = "jeida-24";
+
+	ports {
+		panel_in_lvds: endpoint {
+			remote-endpoint = <&lvds_out_panel>;
+		};
+	};
+};
+
+For Rockchip RK3288:
+
+	lvds: lvds@ff96c000 {
+		compatible = "rockchip,rk3288-lvds";
+		rockchip,grf = <&grf>;
+		reg = <0xff96c000 0x4000>;
+		clocks = <&cru PCLK_LVDS_PHY>;
+		clock-names = "pclk_lvds";
+		pinctrl-names = "lcdc";
+		pinctrl-0 = <&lcdc_ctl>;
+		avdd1v0-supply = <&vdd10_lcd>;
+		avdd1v8-supply = <&vcc18_lcd>;
+		avdd3v3-supply = <&vcca_33>;
+		rockchip,output = "rgb";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lvds_in: port@0 {
+				reg = <0>;
+
+				lvds_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+				lvds_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -248,6 +248,7 @@ ontat	On Tat Industrial Company
 opencores	OpenCores.org
 option	Option NV
 ORCL	Oracle Corporation
+orisetech	Orise Technology
 ortustech	Ortus Technology Co., Ltd.
 ovti	OmniVision Technologies
 oxsemi	Oxford Semiconductor, Ltd.

Documentation/gpu/drm-uapi.rst

@@ -168,6 +168,61 @@ IOCTL Support on Device Nodes
 .. kernel-doc:: drivers/gpu/drm/drm_ioctl.c
    :doc: driver specific ioctls
 
+Recommended IOCTL Return Values
+-------------------------------
+
+In theory a driver's IOCTL callback is only allowed to return very few error
+codes. In practice it's good to abuse a few more. This section documents common
+practice within the DRM subsystem:
+
+ENOENT:
+        Strictly this should only be used when a file doesn't exist e.g. when
+        calling the open() syscall. We reuse that to signal any kind of object
+        lookup failure, e.g. for unknown GEM buffer object handles, unknown KMS
+        object handles and similar cases.
+
+ENOSPC:
+        Some drivers use this to differentiate "out of kernel memory" from "out
+        of VRAM". Sometimes also applies to other limited gpu resources used for
+        rendering (e.g. when you have a special limited compression buffer).
+        Sometimes resource allocation/reservation issues in command submission
+        IOCTLs are also signalled through EDEADLK.
+
+        Simply running out of kernel/system memory is signalled through ENOMEM.
+
+EPERM/EACCESS:
+        Returned for an operation that is valid, but needs more privileges.
+        E.g. root-only or much more common, DRM master-only operations return
+        this when when called by unpriviledged clients. There's no clear
+        difference between EACCESS and EPERM.
+
+ENODEV:
+        Feature (like PRIME, modesetting, GEM) is not supported by the driver.
+
+ENXIO:
+        Remote failure, either a hardware transaction (like i2c), but also used
+        when the exporting driver of a shared dma-buf or fence doesn't support a
+        feature needed.
+
+EINTR:
+        DRM drivers assume that userspace restarts all IOCTLs. Any DRM IOCTL can
+        return EINTR and in such a case should be restarted with the IOCTL
+        parameters left unchanged.
+
+EIO:
+        The GPU died and couldn't be resurrected through a reset. Modesetting
+        hardware failures are signalled through the "link status" connector
+        property.
+
+EINVAL:
+        Catch-all for anything that is an invalid argument combination which
+        cannot work.
+
+IOCTL also use other error codes like ETIME, EFAULT, EBUSY, ENOTTY but their
+usage is in line with the common meanings. The above list tries to just document
+DRM specific patterns. Note that ENOTTY has the slightly unintuitive meaning of
+"this IOCTL does not exist", and is used exactly as such in DRM.
+
 .. kernel-doc:: include/drm/drm_ioctl.h
    :internal:
 

Documentation/gpu/index.rst

@@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide
    pl111
    tegra
    tinydrm
+   tve200
    vc4
    vga-switcheroo
    vgaarbiter

Documentation/gpu/todo.rst

@@ -75,17 +75,6 @@ helpers.
 
 Contact: Ville Syrjälä, Daniel Vetter, driver maintainers
 
-Implement deferred fbdev setup in the helper
---------------------------------------------
-
-Many (especially embedded drivers) want to delay fbdev setup until there's a
-real screen plugged in. This is to avoid the dreaded fallback to the low-res
-fbdev default. Many drivers have a hacked-up (and often broken) version of this,
-better to do it once in the shared helpers. Thierry has a patch series, but that
-one needs to be rebased and final polish applied.
-
-Contact: Thierry Reding, Daniel Vetter, driver maintainers
-
 Convert early atomic drivers to async commit helpers
 ----------------------------------------------------
 
@@ -138,6 +127,8 @@ interfaces to fix these issues:
   the acquire context explicitly on stack and then also pass it down into
   drivers explicitly so that the legacy-on-atomic functions can use them.
 
+  Except for some driver code this is done.
+
 * A bunch of the vtable hooks are now in the wrong place: DRM has a split
   between core vfunc tables (named ``drm_foo_funcs``), which are used to
   implement the userspace ABI. And then there's the optional hooks for the
@@ -151,6 +142,8 @@ interfaces to fix these issues:
   connector at runtime. That's almost all of them, and would allow us to get
   rid of a lot of ``best_encoder`` boilerplate in drivers.
 
+  This was almost done, but new drivers added a few more cases again.
+
 Contact: Daniel Vetter
 
 Get rid of dev->struct_mutex from GEM drivers
@@ -177,6 +170,17 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 
 Contact: Daniel Vetter, respective driver maintainers
 
+Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent
+----------------------------------------------------------------------------
+
+For drivers which could have multiple instances, it is necessary to
+differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR
+don't do this, drivers used dev_info/warn/err to make this differentiation. We
+now have DRM_DEV_* variants of the drm print macros, so we can start to convert
+those drivers back to using drm-formwatted specific log messages.
+
+Contact: Sean Paul, Maintainer of the driver you plan to convert
+
 Core refactorings
 =================
 

Documentation/gpu/tve200.rst

@@ -0,0 +1,6 @@
+==================================
+ drm/tve200 Faraday TV Encoder 200
+==================================
+
+.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
+   :doc: Faraday TV Encoder 200

MAINTAINERS

@@ -4366,6 +4366,12 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
 F:	drivers/gpu/drm/bochs/
 
+DRM DRIVER FOR FARADAY TVE200 TV ENCODER
+M:	Linus Walleij <linus.walleij@linaro.org>
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+S:	Maintained
+F:	drivers/gpu/drm/tve200/
+
 DRM DRIVER FOR INTEL I810 VIDEO CARDS
 S:	Orphan / Obsolete
 F:	drivers/gpu/drm/i810/
@@ -4509,7 +4515,7 @@ L:	dri-devel@lists.freedesktop.org
 S:	Supported
 F:	drivers/gpu/drm/sun4i/
 F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux.git
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DRM DRIVERS FOR AMLOGIC SOCS
 M:	Neil Armstrong <narmstrong@baylibre.com>
@@ -4693,7 +4699,7 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 DRM PANEL DRIVERS
 M:	Thierry Reding <thierry.reding@gmail.com>
 L:	dri-devel@lists.freedesktop.org
-T:	git git://anongit.freedesktop.org/tegra/linux.git
+T:	git git://anongit.freedesktop.org/drm/drm-misc
 S:	Maintained
 F:	drivers/gpu/drm/drm_panel.c
 F:	drivers/gpu/drm/panel/

drivers/dma-buf/sw_sync.c

@@ -321,8 +321,16 @@ static int sw_sync_debugfs_open(struct inode *inode, struct file *file)
 static int sw_sync_debugfs_release(struct inode *inode, struct file *file)
 {
 	struct sync_timeline *obj = file->private_data;
+	struct sync_pt *pt, *next;
+
+	spin_lock_irq(&obj->lock);
+
+	list_for_each_entry_safe(pt, next, &obj->pt_list, link) {
+		dma_fence_set_error(&pt->base, -ENOENT);
+		dma_fence_signal_locked(&pt->base);
+	}
 
-	smp_wmb();
+	spin_unlock_irq(&obj->lock);
 
 	sync_timeline_put(obj);
 	return 0;

drivers/gpu/drm/Kconfig

@@ -110,7 +110,7 @@ config DRM_FBDEV_OVERALLOC
 
 config DRM_LOAD_EDID_FIRMWARE
 	bool "Allow to specify an EDID data set instead of probing for it"
-	depends on DRM_KMS_HELPER
+	depends on DRM
 	help
 	  Say Y here, if you want to use EDID data to be loaded from the
 	  /lib/firmware directory or one of the provided built-in
@@ -278,6 +278,8 @@ source "drivers/gpu/drm/tinydrm/Kconfig"
 
 source "drivers/gpu/drm/pl111/Kconfig"
 
+source "drivers/gpu/drm/tve200/Kconfig"
+
 # Keep legacy drivers last
 
 menuconfig DRM_LEGACY

drivers/gpu/drm/Makefile

@@ -28,6 +28,7 @@ drm-$(CONFIG_DRM_PANEL) += drm_panel.o
 drm-$(CONFIG_OF) += drm_of.o
 drm-$(CONFIG_AGP) += drm_agpsupport.o
 drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o
+drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 
 drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \
@@ -36,7 +37,6 @@ drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
 		drm_scdc_helper.o drm_gem_framebuffer_helper.o
 
 drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o
-drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
 drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
 drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
 drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
@@ -44,8 +44,6 @@ drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
 obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
 obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
 
-CFLAGS_drm_trace_points.o := -I$(src)
-
 obj-$(CONFIG_DRM)	+= drm.o
 obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
 obj-$(CONFIG_DRM_ARM)	+= arm/
@@ -100,3 +98,4 @@ obj-$(CONFIG_DRM_ZTE)	+= zte/
 obj-$(CONFIG_DRM_MXSFB)	+= mxsfb/
 obj-$(CONFIG_DRM_TINYDRM) += tinydrm/
 obj-$(CONFIG_DRM_PL111) += pl111/
+obj-$(CONFIG_DRM_TVE200) += tve200/

drivers/gpu/drm/arc/arcpgu_drv.c

@@ -18,6 +18,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_atomic_helper.h>
 #include <linux/of_reserved_mem.h>
 
@@ -32,7 +33,7 @@ static void arcpgu_fb_output_poll_changed(struct drm_device *dev)
 }
 
 static const struct drm_mode_config_funcs arcpgu_drm_modecfg_funcs = {
-	.fb_create  = drm_fb_cma_create,
+	.fb_create  = drm_gem_fb_create,
 	.output_poll_changed = arcpgu_fb_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/arm/hdlcd_drv.c

@@ -25,6 +25,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_of.h>
 
 #include "hdlcd_drv.h"
@@ -106,7 +107,7 @@ static void hdlcd_fb_output_poll_changed(struct drm_device *drm)
 }
 
 static const struct drm_mode_config_funcs hdlcd_mode_config_funcs = {
-	.fb_create = drm_fb_cma_create,
+	.fb_create = drm_gem_fb_create,
 	.output_poll_changed = hdlcd_fb_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/arm/malidp_drv.c

@@ -26,6 +26,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_of.h>
 
 #include "malidp_drv.h"
@@ -249,7 +250,7 @@ static const struct drm_mode_config_helper_funcs malidp_mode_config_helpers = {
 };
 
 static const struct drm_mode_config_funcs malidp_mode_config_funcs = {
-	.fb_create = drm_fb_cma_create,
+	.fb_create = drm_gem_fb_create,
 	.output_poll_changed = malidp_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/armada/Makefile

@@ -4,5 +4,3 @@ armada-y	+= armada_510.o
 armada-$(CONFIG_DEBUG_FS) += armada_debugfs.o
 
 obj-$(CONFIG_DRM_ARMADA) := armada.o
-
-CFLAGS_armada_trace.o := -I$(src)

drivers/gpu/drm/armada/armada_drv.c

@@ -70,8 +70,6 @@ static struct drm_driver armada_drm_driver = {
 	.gem_prime_export	= armada_gem_prime_export,
 	.gem_prime_import	= armada_gem_prime_import,
 	.dumb_create		= armada_gem_dumb_create,
-	.dumb_map_offset	= armada_gem_dumb_map_offset,
-	.dumb_destroy		= armada_gem_dumb_destroy,
 	.gem_vm_ops		= &armada_gem_vm_ops,
 	.major			= 1,
 	.minor			= 0,

drivers/gpu/drm/armada/armada_gem.c

@@ -270,42 +270,6 @@ int armada_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
 	return ret;
 }
 
-int armada_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
-	uint32_t handle, uint64_t *offset)
-{
-	struct armada_gem_object *obj;
-	int ret = 0;
-
-	obj = armada_gem_object_lookup(file, handle);
-	if (!obj) {
-		DRM_ERROR("failed to lookup gem object\n");
-		return -EINVAL;
-	}
-
-	/* Don't allow imported objects to be mapped */
-	if (obj->obj.import_attach) {
-		ret = -EINVAL;
-		goto err_unref;
-	}
-
-	ret = drm_gem_create_mmap_offset(&obj->obj);
-	if (ret == 0) {
-		*offset = drm_vma_node_offset_addr(&obj->obj.vma_node);
-		DRM_DEBUG_DRIVER("handle %#x offset %llx\n", handle, *offset);
-	}
-
- err_unref:
-	drm_gem_object_unreference_unlocked(&obj->obj);
-
-	return ret;
-}
-
-int armada_gem_dumb_destroy(struct drm_file *file, struct drm_device *dev,
-	uint32_t handle)
-{
-	return drm_gem_handle_delete(file, handle);
-}
-
 /* Private driver gem ioctls */
 int armada_gem_create_ioctl(struct drm_device *dev, void *data,
 	struct drm_file *file)

drivers/gpu/drm/armada/armada_gem.h

@@ -35,10 +35,6 @@ struct armada_gem_object *armada_gem_alloc_private_object(struct drm_device *,
 	size_t);
 int armada_gem_dumb_create(struct drm_file *, struct drm_device *,
 	struct drm_mode_create_dumb *);
-int armada_gem_dumb_map_offset(struct drm_file *, struct drm_device *,
-	uint32_t, uint64_t *);
-int armada_gem_dumb_destroy(struct drm_file *, struct drm_device *,
-	uint32_t);
 struct dma_buf *armada_gem_prime_export(struct drm_device *dev,
 	struct drm_gem_object *obj, int flags);
 struct drm_gem_object *armada_gem_prime_import(struct drm_device *,

drivers/gpu/drm/armada/armada_trace.h

@@ -62,5 +62,5 @@ TRACE_EVENT(armada_ovl_plane_work,
 
 /* This part must be outside protection */
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_PATH ../../drivers/gpu/drm/armada
 #include <trace/define_trace.h>

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c

@@ -458,7 +458,7 @@ static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data)
 static struct drm_framebuffer *atmel_hlcdc_fb_create(struct drm_device *dev,
 		struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
 {
-	return drm_fb_cma_create(dev, file_priv, mode_cmd);
+	return drm_gem_fb_create(dev, file_priv, mode_cmd);
 }
 
 static void atmel_hlcdc_fb_output_poll_changed(struct drm_device *dev)

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h

@@ -34,6 +34,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_plane_helper.h>
 #include <drm/drmP.h>

drivers/gpu/drm/bridge/adv7511/adv7511.h

@@ -328,8 +328,6 @@ struct adv7511 {
 	enum adv7511_sync_polarity hsync_polarity;
 	bool rgb;
 
-	struct edid *edid;
-
 	struct gpio_desc *gpio_pd;
 
 	struct regulator_bulk_data *supplies;

drivers/gpu/drm/bridge/adv7511/adv7511_audio.c

@@ -210,7 +210,7 @@ static const struct hdmi_codec_ops adv7511_codec_ops = {
 	.get_dai_id	= adv7511_hdmi_i2s_get_dai_id,
 };
 
-static struct hdmi_codec_pdata codec_data = {
+static const struct hdmi_codec_pdata codec_data = {
 	.ops = &adv7511_codec_ops,
 	.max_i2s_channels = 2,
 	.i2s = 1,

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c

@@ -199,17 +199,14 @@ static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
 
 static void adv7511_set_config_csc(struct adv7511 *adv7511,
 				   struct drm_connector *connector,
-				   bool rgb)
+				   bool rgb, bool hdmi_mode)
 {
 	struct adv7511_video_config config;
 	bool output_format_422, output_format_ycbcr;
 	unsigned int mode;
 	uint8_t infoframe[17];
 
-	if (adv7511->edid)
-		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
-	else
-		config.hdmi_mode = false;
+	config.hdmi_mode = hdmi_mode;
 
 	hdmi_avi_infoframe_init(&config.avi_infoframe);
 
@@ -589,15 +586,14 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
 	if (!adv7511->powered)
 		__adv7511_power_off(adv7511);
 
-	kfree(adv7511->edid);
-	adv7511->edid = edid;
-	if (!edid)
-		return 0;
 
 	drm_mode_connector_update_edid_property(connector, edid);
 	count = drm_add_edid_modes(connector, edid);
 
-	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb,
+			       drm_detect_hdmi_monitor(edid));
+
+	kfree(edid);
 
 	return count;
 }
@@ -833,7 +829,11 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
 		return -ENODEV;
 	}
 
-	adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	if (adv->i2c_main->irq)
+		adv->connector.polled = DRM_CONNECTOR_POLL_HPD;
+	else
+		adv->connector.polled = DRM_CONNECTOR_POLL_CONNECT |
+				DRM_CONNECTOR_POLL_DISCONNECT;
 
 	ret = drm_connector_init(bridge->dev, &adv->connector,
 				 &adv7511_connector_funcs,
@@ -1158,8 +1158,6 @@ static int adv7511_remove(struct i2c_client *i2c)
 
 	i2c_unregister_device(adv7511->i2c_edid);
 
-	kfree(adv7511->edid);
-
 	return 0;
 }
 

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c

@@ -30,19 +30,20 @@
 #include <video/mipi_display.h>
 
 #define DSI_VERSION			0x00
+
 #define DSI_PWR_UP			0x04
 #define RESET				0
 #define POWERUP				BIT(0)
 
 #define DSI_CLKMGR_CFG			0x08
-#define TO_CLK_DIVIDSION(div)		(((div) & 0xff) << 8)
-#define TX_ESC_CLK_DIVIDSION(div)	(((div) & 0xff) << 0)
+#define TO_CLK_DIVISION(div)		(((div) & 0xff) << 8)
+#define TX_ESC_CLK_DIVISION(div)	((div) & 0xff)
 
 #define DSI_DPI_VCID			0x0c
-#define DPI_VID(vid)			(((vid) & 0x3) << 0)
+#define DPI_VCID(vcid)			((vcid) & 0x3)
 
 #define DSI_DPI_COLOR_CODING		0x10
-#define EN18_LOOSELY			BIT(8)
+#define LOOSELY18_EN			BIT(8)
 #define DPI_COLOR_CODING_16BIT_1	0x0
 #define DPI_COLOR_CODING_16BIT_2	0x1
 #define DPI_COLOR_CODING_16BIT_3	0x2
@@ -61,22 +62,25 @@
 #define OUTVACT_LPCMD_TIME(p)		(((p) & 0xff) << 16)
 #define INVACT_LPCMD_TIME(p)		((p) & 0xff)
 
+#define DSI_DBI_VCID			0x1c
 #define DSI_DBI_CFG			0x20
+#define DSI_DBI_PARTITIONING_EN		0x24
 #define DSI_DBI_CMDSIZE			0x28
 
 #define DSI_PCKHDL_CFG			0x2c
-#define EN_CRC_RX			BIT(4)
-#define EN_ECC_RX			BIT(3)
-#define EN_BTA				BIT(2)
-#define EN_EOTP_RX			BIT(1)
-#define EN_EOTP_TX			BIT(0)
+#define CRC_RX_EN			BIT(4)
+#define ECC_RX_EN			BIT(3)
+#define BTA_EN				BIT(2)
+#define EOTP_RX_EN			BIT(1)
+#define EOTP_TX_EN			BIT(0)
+
+#define DSI_GEN_VCID			0x30
 
 #define DSI_MODE_CFG			0x34
 #define ENABLE_VIDEO_MODE		0
 #define ENABLE_CMD_MODE			BIT(0)
 
 #define DSI_VID_MODE_CFG		0x38
-#define FRAME_BTA_ACK			BIT(14)
 #define ENABLE_LOW_POWER		(0x3f << 8)
 #define ENABLE_LOW_POWER_MASK		(0x3f << 8)
 #define VID_MODE_TYPE_NON_BURST_SYNC_PULSES	0x0
@@ -85,8 +89,13 @@
 #define VID_MODE_TYPE_MASK			0x3
 
 #define DSI_VID_PKT_SIZE		0x3c
-#define VID_PKT_SIZE(p)			(((p) & 0x3fff) << 0)
-#define VID_PKT_MAX_SIZE		0x3fff
+#define VID_PKT_SIZE(p)			((p) & 0x3fff)
+
+#define DSI_VID_NUM_CHUNKS		0x40
+#define VID_NUM_CHUNKS(c)		((c) & 0x1fff)
+
+#define DSI_VID_NULL_SIZE		0x44
+#define VID_NULL_SIZE(b)		((b) & 0x1fff)
 
 #define DSI_VID_HSA_TIME		0x48
 #define DSI_VID_HBP_TIME		0x4c
@@ -95,6 +104,8 @@
 #define DSI_VID_VBP_LINES		0x58
 #define DSI_VID_VFP_LINES		0x5c
 #define DSI_VID_VACTIVE_LINES		0x60
+#define DSI_EDPI_CMD_SIZE		0x64
+
 #define DSI_CMD_MODE_CFG		0x68
 #define MAX_RD_PKT_SIZE_LP		BIT(24)
 #define DCS_LW_TX_LP			BIT(19)
@@ -108,8 +119,8 @@
 #define GEN_SW_2P_TX_LP			BIT(10)
 #define GEN_SW_1P_TX_LP			BIT(9)
 #define GEN_SW_0P_TX_LP			BIT(8)
-#define EN_ACK_RQST			BIT(1)
-#define EN_TEAR_FX			BIT(0)
+#define ACK_RQST_EN			BIT(1)
+#define TEAR_FX_EN			BIT(0)
 
 #define CMD_MODE_ALL_LP			(MAX_RD_PKT_SIZE_LP | \
 					 DCS_LW_TX_LP | \
@@ -125,27 +136,31 @@
 					 GEN_SW_0P_TX_LP)
 
 #define DSI_GEN_HDR			0x6c
+/* TODO These 2 defines will be reworked thanks to mipi_dsi_create_packet() */
 #define GEN_HDATA(data)			(((data) & 0xffff) << 8)
-#define GEN_HDATA_MASK			(0xffff << 8)
 #define GEN_HTYPE(type)			(((type) & 0xff) << 0)
-#define GEN_HTYPE_MASK			0xff
 
 #define DSI_GEN_PLD_DATA		0x70
 
 #define DSI_CMD_PKT_STATUS		0x74
-#define GEN_CMD_EMPTY			BIT(0)
-#define GEN_CMD_FULL			BIT(1)
-#define GEN_PLD_W_EMPTY			BIT(2)
-#define GEN_PLD_W_FULL			BIT(3)
-#define GEN_PLD_R_EMPTY			BIT(4)
-#define GEN_PLD_R_FULL			BIT(5)
 #define GEN_RD_CMD_BUSY			BIT(6)
+#define GEN_PLD_R_FULL			BIT(5)
+#define GEN_PLD_R_EMPTY			BIT(4)
+#define GEN_PLD_W_FULL			BIT(3)
+#define GEN_PLD_W_EMPTY			BIT(2)
+#define GEN_CMD_FULL			BIT(1)
+#define GEN_CMD_EMPTY			BIT(0)
 
 #define DSI_TO_CNT_CFG			0x78
 #define HSTX_TO_CNT(p)			(((p) & 0xffff) << 16)
 #define LPRX_TO_CNT(p)			((p) & 0xffff)
 
+#define DSI_HS_RD_TO_CNT		0x7c
+#define DSI_LP_RD_TO_CNT		0x80
+#define DSI_HS_WR_TO_CNT		0x84
+#define DSI_LP_WR_TO_CNT		0x88
 #define DSI_BTA_TO_CNT			0x8c
+
 #define DSI_LPCLK_CTRL			0x94
 #define AUTO_CLKLANE_CTRL		BIT(1)
 #define PHY_TXREQUESTCLKHS		BIT(0)
@@ -154,6 +169,7 @@
 #define PHY_CLKHS2LP_TIME(lbcc)		(((lbcc) & 0x3ff) << 16)
 #define PHY_CLKLP2HS_TIME(lbcc)		((lbcc) & 0x3ff)
 
+/* TODO Next register is slightly different between 1.30 & 1.31 IP version */
 #define DSI_PHY_TMR_CFG			0x9c
 #define PHY_HS2LP_TIME(lbcc)		(((lbcc) & 0xff) << 24)
 #define PHY_LP2HS_TIME(lbcc)		(((lbcc) & 0xff) << 16)
@@ -170,12 +186,15 @@
 #define PHY_UNSHUTDOWNZ			BIT(0)
 
 #define DSI_PHY_IF_CFG			0xa4
-#define N_LANES(n)			((((n) - 1) & 0x3) << 0)
 #define PHY_STOP_WAIT_TIME(cycle)	(((cycle) & 0xff) << 8)
+#define N_LANES(n)			(((n) - 1) & 0x3)
+
+#define DSI_PHY_ULPS_CTRL		0xa8
+#define DSI_PHY_TX_TRIGGERS		0xac
 
 #define DSI_PHY_STATUS			0xb0
-#define LOCK				BIT(0)
-#define STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_STOP_STATE_CLK_LANE		BIT(2)
+#define PHY_LOCK			BIT(0)
 
 #define DSI_PHY_TST_CTRL0		0xb4
 #define PHY_TESTCLK			BIT(1)
@@ -187,12 +206,13 @@
 #define PHY_TESTEN			BIT(16)
 #define PHY_UNTESTEN			0
 #define PHY_TESTDOUT(n)			(((n) & 0xff) << 8)
-#define PHY_TESTDIN(n)			(((n) & 0xff) << 0)
+#define PHY_TESTDIN(n)			((n) & 0xff)
 
 #define DSI_INT_ST0			0xbc
 #define DSI_INT_ST1			0xc0
 #define DSI_INT_MSK0			0xc4
 #define DSI_INT_MSK1			0xc8
+#define DSI_PHY_TMR_RD_CFG		0xf4
 
 #define PHY_STATUS_TIMEOUT_US		10000
 #define CMD_PKT_STATUS_TIMEOUT_US	20000
@@ -307,7 +327,7 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
 	u32 val = 0;
 
 	if (msg->flags & MIPI_DSI_MSG_REQ_ACK)
-		val |= EN_ACK_RQST;
+		val |= ACK_RQST_EN;
 	if (lpm)
 		val |= CMD_MODE_ALL_LP;
 
@@ -506,8 +526,8 @@ static void dw_mipi_dsi_init(struct dw_mipi_dsi *dsi)
 	 * timeout clock division should be computed with the
 	 * high speed transmission counter timeout and byte lane...
 	 */
-	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVIDSION(10) |
-		  TX_ESC_CLK_DIVIDSION(esc_clk_division));
+	dsi_write(dsi, DSI_CLKMGR_CFG, TO_CLK_DIVISION(10) |
+		  TX_ESC_CLK_DIVISION(esc_clk_division));
 }
 
 static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
@@ -520,7 +540,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 		color = DPI_COLOR_CODING_24BIT;
 		break;
 	case MIPI_DSI_FMT_RGB666:
-		color = DPI_COLOR_CODING_18BIT_2 | EN18_LOOSELY;
+		color = DPI_COLOR_CODING_18BIT_2 | LOOSELY18_EN;
 		break;
 	case MIPI_DSI_FMT_RGB666_PACKED:
 		color = DPI_COLOR_CODING_18BIT_1;
@@ -535,7 +555,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		val |= HSYNC_ACTIVE_LOW;
 
-	dsi_write(dsi, DSI_DPI_VCID, DPI_VID(dsi->channel));
+	dsi_write(dsi, DSI_DPI_VCID, DPI_VCID(dsi->channel));
 	dsi_write(dsi, DSI_DPI_COLOR_CODING, color);
 	dsi_write(dsi, DSI_DPI_CFG_POL, val);
 	/*
@@ -550,7 +570,7 @@ static void dw_mipi_dsi_dpi_config(struct dw_mipi_dsi *dsi,
 
 static void dw_mipi_dsi_packet_handler_config(struct dw_mipi_dsi *dsi)
 {
-	dsi_write(dsi, DSI_PCKHDL_CFG, EN_CRC_RX | EN_ECC_RX | EN_BTA);
+	dsi_write(dsi, DSI_PCKHDL_CFG, CRC_RX_EN | ECC_RX_EN | BTA_EN);
 }
 
 static void dw_mipi_dsi_video_packet_config(struct dw_mipi_dsi *dsi,
@@ -571,7 +591,7 @@ static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
 	/*
 	 * TODO dw drv improvements
 	 * compute high speed transmission counter timeout according
-	 * to the timeout clock division (TO_CLK_DIVIDSION) and byte lane...
+	 * to the timeout clock division (TO_CLK_DIVISION) and byte lane...
 	 */
 	dsi_write(dsi, DSI_TO_CNT_CFG, HSTX_TO_CNT(1000) | LPRX_TO_CNT(1000));
 	/*
@@ -684,13 +704,13 @@ static void dw_mipi_dsi_dphy_enable(struct dw_mipi_dsi *dsi)
 	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
 		  PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
 
-	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
-				 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
+	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS, val,
+				 val & PHY_LOCK, 1000, PHY_STATUS_TIMEOUT_US);
 	if (ret < 0)
 		DRM_DEBUG_DRIVER("failed to wait phy lock state\n");
 
 	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
-				 val, val & STOP_STATE_CLK_LANE, 1000,
+				 val, val & PHY_STOP_STATE_CLK_LANE, 1000,
 				 PHY_STATUS_TIMEOUT_US);
 	if (ret < 0)
 		DRM_DEBUG_DRIVER("failed to wait phy clk lane stop state\n");
@@ -865,15 +885,14 @@ __dw_mipi_dsi_probe(struct platform_device *pdev,
 	 * Note that the reset was not defined in the initial device tree, so
 	 * we have to be prepared for it not being found.
 	 */
-	apb_rst = devm_reset_control_get(dev, "apb");
+	apb_rst = devm_reset_control_get_optional_exclusive(dev, "apb");
 	if (IS_ERR(apb_rst)) {
 		ret = PTR_ERR(apb_rst);
-		if (ret == -ENOENT) {
-			apb_rst = NULL;
-		} else {
+
+		if (ret != -EPROBE_DEFER)
 			dev_err(dev, "Unable to get reset control: %d\n", ret);
-			return ERR_PTR(ret);
-		}
+
+		return ERR_PTR(ret);
 	}
 
 	if (apb_rst) {

drivers/gpu/drm/drm_atomic.c

@@ -163,13 +163,6 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)
 		crtc->funcs->atomic_destroy_state(crtc,
 						  state->crtcs[i].state);
 
-		if (state->crtcs[i].commit) {
-			kfree(state->crtcs[i].commit->event);
-			state->crtcs[i].commit->event = NULL;
-			drm_crtc_commit_put(state->crtcs[i].commit);
-		}
-
-		state->crtcs[i].commit = NULL;
 		state->crtcs[i].ptr = NULL;
 		state->crtcs[i].state = NULL;
 	}
@@ -199,6 +192,10 @@ void drm_atomic_state_default_clear(struct drm_atomic_state *state)
 	}
 	state->num_private_objs = 0;
 
+	if (state->fake_commit) {
+		drm_crtc_commit_put(state->fake_commit);
+		state->fake_commit = NULL;
+	}
 }
 EXPORT_SYMBOL(drm_atomic_state_default_clear);
 
@@ -2237,7 +2234,7 @@ int drm_mode_atomic_ioctl(struct drm_device *dev,
 			(arg->flags & DRM_MODE_PAGE_FLIP_EVENT))
 		return -EINVAL;
 
-	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
 
 	state = drm_atomic_state_alloc(dev);
 	if (!state)
@@ -2350,8 +2347,9 @@ out:
 
 	if (ret == -EDEADLK) {
 		drm_atomic_state_clear(state);
-		drm_modeset_backoff(&ctx);
-		goto retry;
+		ret = drm_modeset_backoff(&ctx);
+		if (!ret)
+			goto retry;
 	}
 
 	drm_atomic_state_put(state);

drivers/gpu/drm/drm_atomic_helper.c

@@ -1262,12 +1262,12 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
 void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
 					  struct drm_atomic_state *old_state)
 {
-	struct drm_crtc_state *unused;
+	struct drm_crtc_state *new_crtc_state;
 	struct drm_crtc *crtc;
 	int i;
 
-	for_each_new_crtc_in_state(old_state, crtc, unused, i) {
-		struct drm_crtc_commit *commit = old_state->crtcs[i].commit;
+	for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
+		struct drm_crtc_commit *commit = new_crtc_state->commit;
 		int ret;
 
 		if (!commit)
@@ -1388,35 +1388,31 @@ int drm_atomic_helper_async_check(struct drm_device *dev,
 {
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *crtc_state;
-	struct drm_crtc_commit *commit;
-	struct drm_plane *__plane, *plane = NULL;
-	struct drm_plane_state *__plane_state, *plane_state = NULL;
+	struct drm_plane *plane;
+	struct drm_plane_state *old_plane_state, *new_plane_state;
 	const struct drm_plane_helper_funcs *funcs;
-	int i, j, n_planes = 0;
+	int i, n_planes = 0;
 
 	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
 		if (drm_atomic_crtc_needs_modeset(crtc_state))
 			return -EINVAL;
 	}
 
-	for_each_new_plane_in_state(state, __plane, __plane_state, i) {
+	for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i)
 		n_planes++;
-		plane = __plane;
-		plane_state = __plane_state;
-	}
 
 	/* FIXME: we support only single plane updates for now */
-	if (!plane || n_planes != 1)
+	if (n_planes != 1)
 		return -EINVAL;
 
-	if (!plane_state->crtc)
+	if (!new_plane_state->crtc)
 		return -EINVAL;
 
 	funcs = plane->helper_private;
 	if (!funcs->atomic_async_update)
 		return -EINVAL;
 
-	if (plane_state->fence)
+	if (new_plane_state->fence)
 		return -EINVAL;
 
 	/*
@@ -1424,31 +1420,11 @@ int drm_atomic_helper_async_check(struct drm_device *dev,
 	 * the plane.  This prevents our async update's changes from getting
 	 * overridden by a previous synchronous update's state.
 	 */
-	for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
-		if (plane->crtc != crtc)
-			continue;
+	if (old_plane_state->commit &&
+	    !try_wait_for_completion(&old_plane_state->commit->hw_done))
+		return -EBUSY;
 
-		spin_lock(&crtc->commit_lock);
-		commit = list_first_entry_or_null(&crtc->commit_list,
-						  struct drm_crtc_commit,
-						  commit_entry);
-		if (!commit) {
-			spin_unlock(&crtc->commit_lock);
-			continue;
-		}
-		spin_unlock(&crtc->commit_lock);
-
-		if (!crtc->state->state)
-			continue;
-
-		for_each_plane_in_state(crtc->state->state, __plane,
-					__plane_state, j) {
-			if (__plane == plane)
-				return -EINVAL;
-		}
-	}
-
-	return funcs->atomic_async_check(plane, plane_state);
+	return funcs->atomic_async_check(plane, new_plane_state);
 }
 EXPORT_SYMBOL(drm_atomic_helper_async_check);
 
@@ -1633,8 +1609,7 @@ static int stall_checks(struct drm_crtc *crtc, bool nonblock)
 				return -EBUSY;
 			}
 		} else if (i == 1) {
-			stall_commit = commit;
-			drm_crtc_commit_get(stall_commit);
+			stall_commit = drm_crtc_commit_get(commit);
 			break;
 		}
 
@@ -1668,6 +1643,38 @@ static void release_crtc_commit(struct completion *completion)
 	drm_crtc_commit_put(commit);
 }
 
+static void init_commit(struct drm_crtc_commit *commit, struct drm_crtc *crtc)
+{
+	init_completion(&commit->flip_done);
+	init_completion(&commit->hw_done);
+	init_completion(&commit->cleanup_done);
+	INIT_LIST_HEAD(&commit->commit_entry);
+	kref_init(&commit->ref);
+	commit->crtc = crtc;
+}
+
+static struct drm_crtc_commit *
+crtc_or_fake_commit(struct drm_atomic_state *state, struct drm_crtc *crtc)
+{
+	if (crtc) {
+		struct drm_crtc_state *new_crtc_state;
+
+		new_crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+		return new_crtc_state->commit;
+	}
+
+	if (!state->fake_commit) {
+		state->fake_commit = kzalloc(sizeof(*state->fake_commit), GFP_KERNEL);
+		if (!state->fake_commit)
+			return NULL;
+
+		init_commit(state->fake_commit, NULL);
+	}
+
+	return state->fake_commit;
+}
+
 /**
  * drm_atomic_helper_setup_commit - setup possibly nonblocking commit
  * @state: new modeset state to be committed
@@ -1716,6 +1723,10 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state,
 {
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
+	struct drm_connector *conn;
+	struct drm_connector_state *old_conn_state, *new_conn_state;
+	struct drm_plane *plane;
+	struct drm_plane_state *old_plane_state, *new_plane_state;
 	struct drm_crtc_commit *commit;
 	int i, ret;
 
@@ -1724,14 +1735,9 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state,
 		if (!commit)
 			return -ENOMEM;
 
-		init_completion(&commit->flip_done);
-		init_completion(&commit->hw_done);
-		init_completion(&commit->cleanup_done);
-		INIT_LIST_HEAD(&commit->commit_entry);
-		kref_init(&commit->ref);
-		commit->crtc = crtc;
+		init_commit(commit, crtc);
 
-		state->crtcs[i].commit = commit;
+		new_crtc_state->commit = commit;
 
 		ret = stall_checks(crtc, nonblock);
 		if (ret)
@@ -1765,25 +1771,46 @@ int drm_atomic_helper_setup_commit(struct drm_atomic_state *state,
 		drm_crtc_commit_get(commit);
 	}
 
-	return 0;
-}
-EXPORT_SYMBOL(drm_atomic_helper_setup_commit);
+	for_each_oldnew_connector_in_state(state, conn, old_conn_state, new_conn_state, i) {
+		/* commit tracked through new_crtc_state->commit, no need to do it explicitly */
+		if (new_conn_state->crtc)
+			continue;
 
+		/* Userspace is not allowed to get ahead of the previous
+		 * commit with nonblocking ones. */
+		if (nonblock && old_conn_state->commit &&
+		    !try_wait_for_completion(&old_conn_state->commit->flip_done))
+			return -EBUSY;
 
-static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc)
-{
-	struct drm_crtc_commit *commit;
-	int i = 0;
+		commit = crtc_or_fake_commit(state, old_conn_state->crtc);
+		if (!commit)
+			return -ENOMEM;
 
-	list_for_each_entry(commit, &crtc->commit_list, commit_entry) {
-		/* skip the first entry, that's the current commit */
-		if (i == 1)
-			return commit;
-		i++;
+		new_conn_state->commit = drm_crtc_commit_get(commit);
+	}
+
+	for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
+		/*
+		 * Unlike connectors, always track planes explicitly for
+		 * async pageflip support.
+		 */
+
+		/* Userspace is not allowed to get ahead of the previous
+		 * commit with nonblocking ones. */
+		if (nonblock && old_plane_state->commit &&
+		    !try_wait_for_completion(&old_plane_state->commit->flip_done))
+			return -EBUSY;
+
+		commit = crtc_or_fake_commit(state, old_plane_state->crtc);
+		if (!commit)
+			return -ENOMEM;
+
+		new_plane_state->commit = drm_crtc_commit_get(commit);
 	}
 
-	return NULL;
+	return 0;
 }
+EXPORT_SYMBOL(drm_atomic_helper_setup_commit);
 
 /**
  * drm_atomic_helper_wait_for_dependencies - wait for required preceeding commits
@@ -1800,17 +1827,17 @@ static struct drm_crtc_commit *preceeding_commit(struct drm_crtc *crtc)
 void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state)
 {
 	struct drm_crtc *crtc;
-	struct drm_crtc_state *new_crtc_state;
+	struct drm_crtc_state *old_crtc_state;
+	struct drm_plane *plane;
+	struct drm_plane_state *old_plane_state;
+	struct drm_connector *conn;
+	struct drm_connector_state *old_conn_state;
 	struct drm_crtc_commit *commit;
 	int i;
 	long ret;
 
-	for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
-		spin_lock(&crtc->commit_lock);
-		commit = preceeding_commit(crtc);
-		if (commit)
-			drm_crtc_commit_get(commit);
-		spin_unlock(&crtc->commit_lock);
+	for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) {
+		commit = old_crtc_state->commit;
 
 		if (!commit)
 			continue;
@@ -1828,8 +1855,48 @@ void drm_atomic_helper_wait_for_dependencies(struct drm_atomic_state *old_state)
 		if (ret == 0)
 			DRM_ERROR("[CRTC:%d:%s] flip_done timed out\n",
 				  crtc->base.id, crtc->name);
+	}
+
+	for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
+		commit = old_conn_state->commit;
 
-		drm_crtc_commit_put(commit);
+		if (!commit)
+			continue;
+
+		ret = wait_for_completion_timeout(&commit->hw_done,
+						  10*HZ);
+		if (ret == 0)
+			DRM_ERROR("[CONNECTOR:%d:%s] hw_done timed out\n",
+				  conn->base.id, conn->name);
+
+		/* Currently no support for overwriting flips, hence
+		 * stall for previous one to execute completely. */
+		ret = wait_for_completion_timeout(&commit->flip_done,
+						  10*HZ);
+		if (ret == 0)
+			DRM_ERROR("[CONNECTOR:%d:%s] flip_done timed out\n",
+				  conn->base.id, conn->name);
+	}
+
+	for_each_old_plane_in_state(old_state, plane, old_plane_state, i) {
+		commit = old_plane_state->commit;
+
+		if (!commit)
+			continue;
+
+		ret = wait_for_completion_timeout(&commit->hw_done,
+						  10*HZ);
+		if (ret == 0)
+			DRM_ERROR("[PLANE:%d:%s] hw_done timed out\n",
+				  plane->base.id, plane->name);
+
+		/* Currently no support for overwriting flips, hence
+		 * stall for previous one to execute completely. */
+		ret = wait_for_completion_timeout(&commit->flip_done,
+						  10*HZ);
+		if (ret == 0)
+			DRM_ERROR("[PLANE:%d:%s] flip_done timed out\n",
+				  plane->base.id, plane->name);
 	}
 }
 EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies);
@@ -1852,19 +1919,34 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_dependencies);
 void drm_atomic_helper_commit_hw_done(struct drm_atomic_state *old_state)
 {
 	struct drm_crtc *crtc;
-	struct drm_crtc_state *new_crtc_state;
+	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
 	struct drm_crtc_commit *commit;
 	int i;
 
-	for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
-		commit = old_state->crtcs[i].commit;
+	for_each_oldnew_crtc_in_state(old_state, crtc, old_crtc_state, new_crtc_state, i) {
+		commit = new_crtc_state->commit;
 		if (!commit)
 			continue;
 
+		/*
+		 * copy new_crtc_state->commit to old_crtc_state->commit,
+		 * it's unsafe to touch new_crtc_state after hw_done,
+		 * but we still need to do so in cleanup_done().
+		 */
+		if (old_crtc_state->commit)
+			drm_crtc_commit_put(old_crtc_state->commit);
+
+		old_crtc_state->commit = drm_crtc_commit_get(commit);
+
 		/* backend must have consumed any event by now */
 		WARN_ON(new_crtc_state->event);
 		complete_all(&commit->hw_done);
 	}
+
+	if (old_state->fake_commit) {
+		complete_all(&old_state->fake_commit->hw_done);
+		complete_all(&old_state->fake_commit->flip_done);
+	}
 }
 EXPORT_SYMBOL(drm_atomic_helper_commit_hw_done);
 
@@ -1882,39 +1964,25 @@ EXPORT_SYMBOL(drm_atomic_helper_commit_hw_done);
 void drm_atomic_helper_commit_cleanup_done(struct drm_atomic_state *old_state)
 {
 	struct drm_crtc *crtc;
-	struct drm_crtc_state *new_crtc_state;
+	struct drm_crtc_state *old_crtc_state;
 	struct drm_crtc_commit *commit;
 	int i;
-	long ret;
 
-	for_each_new_crtc_in_state(old_state, crtc, new_crtc_state, i) {
-		commit = old_state->crtcs[i].commit;
+	for_each_old_crtc_in_state(old_state, crtc, old_crtc_state, i) {
+		commit = old_crtc_state->commit;
 		if (WARN_ON(!commit))
 			continue;
 
 		complete_all(&commit->cleanup_done);
 		WARN_ON(!try_wait_for_completion(&commit->hw_done));
 
-		/* commit_list borrows our reference, need to remove before we
-		 * clean up our drm_atomic_state. But only after it actually
-		 * completed, otherwise subsequent commits won't stall properly. */
-		if (try_wait_for_completion(&commit->flip_done))
-			goto del_commit;
-
-		/* We must wait for the vblank event to signal our completion
-		 * before releasing our reference, since the vblank work does
-		 * not hold a reference of its own. */
-		ret = wait_for_completion_timeout(&commit->flip_done,
-						  10*HZ);
-		if (ret == 0)
-			DRM_ERROR("[CRTC:%d:%s] flip_done timed out\n",
-				  crtc->base.id, crtc->name);
-
-del_commit:
 		spin_lock(&crtc->commit_lock);
 		list_del(&commit->commit_entry);
 		spin_unlock(&crtc->commit_lock);
 	}
+
+	if (old_state->fake_commit)
+		complete_all(&old_state->fake_commit->cleanup_done);
 }
 EXPORT_SYMBOL(drm_atomic_helper_commit_cleanup_done);
 
@@ -2294,20 +2362,44 @@ int drm_atomic_helper_swap_state(struct drm_atomic_state *state,
 	struct drm_private_state *old_obj_state, *new_obj_state;
 
 	if (stall) {
-		for_each_new_crtc_in_state(state, crtc, new_crtc_state, i) {
-			spin_lock(&crtc->commit_lock);
-			commit = list_first_entry_or_null(&crtc->commit_list,
-					struct drm_crtc_commit, commit_entry);
-			if (commit)
-				drm_crtc_commit_get(commit);
-			spin_unlock(&crtc->commit_lock);
+		/*
+		 * We have to stall for hw_done here before
+		 * drm_atomic_helper_wait_for_dependencies() because flip
+		 * depth > 1 is not yet supported by all drivers. As long as
+		 * obj->state is directly dereferenced anywhere in the drivers
+		 * atomic_commit_tail function, then it's unsafe to swap state
+		 * before drm_atomic_helper_commit_hw_done() is called.
+		 */
+
+		for_each_old_crtc_in_state(state, crtc, old_crtc_state, i) {
+			commit = old_crtc_state->commit;
+
+			if (!commit)
+				continue;
+
+			ret = wait_for_completion_interruptible(&commit->hw_done);
+			if (ret)
+				return ret;
+		}
+
+		for_each_old_connector_in_state(state, connector, old_conn_state, i) {
+			commit = old_conn_state->commit;
 
 			if (!commit)
 				continue;
 
 			ret = wait_for_completion_interruptible(&commit->hw_done);
-			drm_crtc_commit_put(commit);
+			if (ret)
+				return ret;
+		}
 
+		for_each_old_plane_in_state(state, plane, old_plane_state, i) {
+			commit = old_plane_state->commit;
+
+			if (!commit)
+				continue;
+
+			ret = wait_for_completion_interruptible(&commit->hw_done);
 			if (ret)
 				return ret;
 		}
@@ -2332,13 +2424,13 @@ int drm_atomic_helper_swap_state(struct drm_atomic_state *state,
 		state->crtcs[i].state = old_crtc_state;
 		crtc->state = new_crtc_state;
 
-		if (state->crtcs[i].commit) {
+		if (new_crtc_state->commit) {
 			spin_lock(&crtc->commit_lock);
-			list_add(&state->crtcs[i].commit->commit_entry,
+			list_add(&new_crtc_state->commit->commit_entry,
 				 &crtc->commit_list);
 			spin_unlock(&crtc->commit_lock);
 
-			state->crtcs[i].commit->event = NULL;
+			new_crtc_state->commit->event = NULL;
 		}
 	}
 
@@ -3186,6 +3278,7 @@ void __drm_atomic_helper_crtc_duplicate_state(struct drm_crtc *crtc,
 	state->connectors_changed = false;
 	state->color_mgmt_changed = false;
 	state->zpos_changed = false;
+	state->commit = NULL;
 	state->event = NULL;
 	state->pageflip_flags = 0;
 }
@@ -3224,6 +3317,12 @@ EXPORT_SYMBOL(drm_atomic_helper_crtc_duplicate_state);
  */
 void __drm_atomic_helper_crtc_destroy_state(struct drm_crtc_state *state)
 {
+	if (state->commit) {
+		kfree(state->commit->event);
+		state->commit->event = NULL;
+		drm_crtc_commit_put(state->commit);
+	}
+
 	drm_property_blob_put(state->mode_blob);
 	drm_property_blob_put(state->degamma_lut);
 	drm_property_blob_put(state->ctm);
@@ -3286,6 +3385,7 @@ void __drm_atomic_helper_plane_duplicate_state(struct drm_plane *plane,
 		drm_framebuffer_get(state->fb);
 
 	state->fence = NULL;
+	state->commit = NULL;
 }
 EXPORT_SYMBOL(__drm_atomic_helper_plane_duplicate_state);
 
@@ -3327,6 +3427,9 @@ void __drm_atomic_helper_plane_destroy_state(struct drm_plane_state *state)
 
 	if (state->fence)
 		dma_fence_put(state->fence);
+
+	if (state->commit)
+		drm_crtc_commit_put(state->commit);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_plane_destroy_state);
 
@@ -3405,6 +3508,7 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
 	memcpy(state, connector->state, sizeof(*state));
 	if (state->crtc)
 		drm_connector_get(connector);
+	state->commit = NULL;
 }
 EXPORT_SYMBOL(__drm_atomic_helper_connector_duplicate_state);
 
@@ -3531,6 +3635,9 @@ __drm_atomic_helper_connector_destroy_state(struct drm_connector_state *state)
 {
 	if (state->crtc)
 		drm_connector_put(state->connector);
+
+	if (state->commit)
+		drm_crtc_commit_put(state->commit);
 }
 EXPORT_SYMBOL(__drm_atomic_helper_connector_destroy_state);
 

drivers/gpu/drm/drm_bridge.c

@@ -67,17 +67,12 @@ static LIST_HEAD(bridge_list);
  * drm_bridge_add - add the given bridge to the global bridge list
  *
  * @bridge: bridge control structure
- *
- * RETURNS:
- * Unconditionally returns Zero.
  */
-int drm_bridge_add(struct drm_bridge *bridge)
+void drm_bridge_add(struct drm_bridge *bridge)
 {
 	mutex_lock(&bridge_lock);
 	list_add_tail(&bridge->list, &bridge_list);
 	mutex_unlock(&bridge_lock);
-
-	return 0;
 }
 EXPORT_SYMBOL(drm_bridge_add);
 

drivers/gpu/drm/drm_connector.c

@@ -615,7 +615,6 @@ static const struct drm_prop_enum_list drm_link_status_enum_list[] = {
 	{ DRM_MODE_LINK_STATUS_GOOD, "Good" },
 	{ DRM_MODE_LINK_STATUS_BAD, "Bad" },
 };
-DRM_ENUM_NAME_FN(drm_get_link_status_name, drm_link_status_enum_list)
 
 /**
  * drm_display_info_set_bus_formats - set the supported bus formats

drivers/gpu/drm/drm_crtc.c

@@ -577,7 +577,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data,
 	DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.id, crtc->name);
 
 	mutex_lock(&crtc->dev->mode_config.mutex);
-	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
 retry:
 	ret = drm_modeset_lock_all_ctx(crtc->dev, &ctx);
 	if (ret)
@@ -717,8 +717,9 @@ out:
 	kfree(connector_set);
 	drm_mode_destroy(dev, mode);
 	if (ret == -EDEADLK) {
-		drm_modeset_backoff(&ctx);
-		goto retry;
+		ret = drm_modeset_backoff(&ctx);
+		if (!ret)
+			goto retry;
 	}
 	drm_modeset_drop_locks(&ctx);
 	drm_modeset_acquire_fini(&ctx);

drivers/gpu/drm/drm_debugfs_crc.c

@@ -155,7 +155,7 @@ static int crtc_crc_open(struct inode *inode, struct file *filep)
 	int ret = 0;
 
 	if (drm_drv_uses_atomic_modeset(crtc->dev)) {
-		ret = drm_modeset_lock_interruptible(&crtc->mutex, NULL);
+		ret = drm_modeset_lock_single_interruptible(&crtc->mutex);
 		if (ret)
 			return ret;
 

drivers/gpu/drm/drm_dp_mst_topology.c

@@ -294,6 +294,12 @@ static void drm_dp_encode_sideband_req(struct drm_dp_sideband_msg_req_body *req,
 		memcpy(&buf[idx], req->u.i2c_write.bytes, req->u.i2c_write.num_bytes);
 		idx += req->u.i2c_write.num_bytes;
 		break;
+
+	case DP_POWER_DOWN_PHY:
+	case DP_POWER_UP_PHY:
+		buf[idx] = (req->u.port_num.port_number & 0xf) << 4;
+		idx++;
+		break;
 	}
 	raw->cur_len = idx;
 }
@@ -538,6 +544,21 @@ fail_len:
 	return false;
 }
 
+static bool drm_dp_sideband_parse_power_updown_phy_ack(struct drm_dp_sideband_msg_rx *raw,
+						       struct drm_dp_sideband_msg_reply_body *repmsg)
+{
+	int idx = 1;
+
+	repmsg->u.port_number.port_number = (raw->msg[idx] >> 4) & 0xf;
+	idx++;
+	if (idx > raw->curlen) {
+		DRM_DEBUG_KMS("power up/down phy parse length fail %d %d\n",
+			      idx, raw->curlen);
+		return false;
+	}
+	return true;
+}
+
 static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
 					struct drm_dp_sideband_msg_reply_body *msg)
 {
@@ -567,6 +588,9 @@ static bool drm_dp_sideband_parse_reply(struct drm_dp_sideband_msg_rx *raw,
 		return drm_dp_sideband_parse_enum_path_resources_ack(raw, msg);
 	case DP_ALLOCATE_PAYLOAD:
 		return drm_dp_sideband_parse_allocate_payload_ack(raw, msg);
+	case DP_POWER_DOWN_PHY:
+	case DP_POWER_UP_PHY:
+		return drm_dp_sideband_parse_power_updown_phy_ack(raw, msg);
 	default:
 		DRM_ERROR("Got unknown reply 0x%02x\n", msg->req_type);
 		return false;
@@ -693,6 +717,22 @@ static int build_allocate_payload(struct drm_dp_sideband_msg_tx *msg, int port_n
 	return 0;
 }
 
+static int build_power_updown_phy(struct drm_dp_sideband_msg_tx *msg,
+				  int port_num, bool power_up)
+{
+	struct drm_dp_sideband_msg_req_body req;
+
+	if (power_up)
+		req.req_type = DP_POWER_UP_PHY;
+	else
+		req.req_type = DP_POWER_DOWN_PHY;
+
+	req.u.port_num.port_number = port_num;
+	drm_dp_encode_sideband_req(&req, msg);
+	msg->path_msg = true;
+	return 0;
+}
+
 static int drm_dp_mst_assign_payload_id(struct drm_dp_mst_topology_mgr *mgr,
 					struct drm_dp_vcpi *vcpi)
 {
@@ -1724,6 +1764,40 @@ fail_put:
 	return ret;
 }
 
+int drm_dp_send_power_updown_phy(struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_dp_mst_port *port, bool power_up)
+{
+	struct drm_dp_sideband_msg_tx *txmsg;
+	int len, ret;
+
+	port = drm_dp_get_validated_port_ref(mgr, port);
+	if (!port)
+		return -EINVAL;
+
+	txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
+	if (!txmsg) {
+		drm_dp_put_port(port);
+		return -ENOMEM;
+	}
+
+	txmsg->dst = port->parent;
+	len = build_power_updown_phy(txmsg, port->port_num, power_up);
+	drm_dp_queue_down_tx(mgr, txmsg);
+
+	ret = drm_dp_mst_wait_tx_reply(port->parent, txmsg);
+	if (ret > 0) {
+		if (txmsg->reply.reply_type == 1)
+			ret = -EINVAL;
+		else
+			ret = 0;
+	}
+	kfree(txmsg);
+	drm_dp_put_port(port);
+
+	return ret;
+}
+EXPORT_SYMBOL(drm_dp_send_power_updown_phy);
+
 static int drm_dp_create_payload_step1(struct drm_dp_mst_topology_mgr *mgr,
 				       int id,
 				       struct drm_dp_payload *payload)

drivers/gpu/drm/drm_edid.c

@@ -1533,6 +1533,10 @@ static void connector_bad_edid(struct drm_connector *connector,
  * level, drivers must make all reasonable efforts to expose it as an I2C
  * adapter and use drm_get_edid() instead of abusing this function.
  *
+ * The EDID may be overridden using debugfs override_edid or firmare EDID
+ * (drm_load_edid_firmware() and drm.edid_firmware parameter), in this priority
+ * order. Having either of them bypasses actual EDID reads.
+ *
  * Return: Pointer to valid EDID or NULL if we couldn't find any.
  */
 struct edid *drm_do_get_edid(struct drm_connector *connector,
@@ -1542,6 +1546,17 @@ struct edid *drm_do_get_edid(struct drm_connector *connector,
 {
 	int i, j = 0, valid_extensions = 0;
 	u8 *edid, *new;
+	struct edid *override = NULL;
+
+	if (connector->override_edid)
+		override = drm_edid_duplicate((const struct edid *)
+					      connector->edid_blob_ptr->data);
+
+	if (!override)
+		override = drm_load_edid_firmware(connector);
+
+	if (!IS_ERR_OR_NULL(override))
+		return override;
 
 	if ((edid = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
 		return NULL;

drivers/gpu/drm/drm_edid_load.c

@@ -31,6 +31,22 @@ module_param_string(edid_firmware, edid_firmware, sizeof(edid_firmware), 0644);
 MODULE_PARM_DESC(edid_firmware, "Do not probe monitor, use specified EDID blob "
 	"from built-in data or /lib/firmware instead. ");
 
+/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
+int __drm_set_edid_firmware_path(const char *path)
+{
+	scnprintf(edid_firmware, sizeof(edid_firmware), "%s", path);
+
+	return 0;
+}
+EXPORT_SYMBOL(__drm_set_edid_firmware_path);
+
+/* Use only for backward compatibility with drm_kms_helper.edid_firmware */
+int __drm_get_edid_firmware_path(char *buf, size_t bufsize)
+{
+	return scnprintf(buf, bufsize, "%s", edid_firmware);
+}
+EXPORT_SYMBOL(__drm_get_edid_firmware_path);
+
 #define GENERIC_EDIDS 6
 static const char * const generic_edid_name[GENERIC_EDIDS] = {
 	"edid/800x600.bin",

drivers/gpu/drm/drm_fb_helper.c

@@ -910,6 +910,9 @@ void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
 	if (!drm_fbdev_emulation || !fb_helper)
 		return;
 
+	cancel_work_sync(&fb_helper->resume_work);
+	cancel_work_sync(&fb_helper->dirty_work);
+
 	info = fb_helper->fbdev;
 	if (info) {
 		if (info->cmap.len)
@@ -918,9 +921,6 @@ void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
 	}
 	fb_helper->fbdev = NULL;
 
-	cancel_work_sync(&fb_helper->resume_work);
-	cancel_work_sync(&fb_helper->dirty_work);
-
 	mutex_lock(&kernel_fb_helper_lock);
 	if (!list_empty(&fb_helper->kernel_fb_list)) {
 		list_del(&fb_helper->kernel_fb_list);

drivers/gpu/drm/drm_gem.c

@@ -334,6 +334,12 @@ int drm_gem_dumb_map_offset(struct drm_file *file, struct drm_device *dev,
 	if (!obj)
 		return -ENOENT;
 
+	/* Don't allow imported objects to be mapped */
+	if (obj->import_attach) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	ret = drm_gem_create_mmap_offset(obj);
 	if (ret)
 		goto out;

drivers/gpu/drm/drm_gem_framebuffer_helper.c

@@ -154,7 +154,7 @@ drm_gem_fb_create_with_funcs(struct drm_device *dev, struct drm_file *file,
 
 		objs[i] = drm_gem_object_lookup(file, mode_cmd->handles[i]);
 		if (!objs[i]) {
-			DRM_DEV_ERROR(dev->dev, "Failed to lookup GEM\n");
+			DRM_DEBUG_KMS("Failed to lookup GEM object\n");
 			ret = -ENOENT;
 			goto err_gem_object_put;
 		}
@@ -232,7 +232,7 @@ int drm_gem_fb_prepare_fb(struct drm_plane *plane,
 	struct dma_buf *dma_buf;
 	struct dma_fence *fence;
 
-	if ((plane->state->fb == state->fb) || !state->fb)
+	if (plane->state->fb == state->fb || !state->fb)
 		return 0;
 
 	dma_buf = drm_gem_fb_get_obj(state->fb, 0)->dma_buf;

drivers/gpu/drm/drm_kms_helper_common.c

@@ -26,6 +26,7 @@
  */
 
 #include <linux/module.h>
+#include <drm/drmP.h>
 
 #include "drm_crtc_helper_internal.h"
 
@@ -33,6 +34,33 @@ MODULE_AUTHOR("David Airlie, Jesse Barnes");
 MODULE_DESCRIPTION("DRM KMS helper");
 MODULE_LICENSE("GPL and additional rights");
 
+#if IS_ENABLED(CONFIG_DRM_LOAD_EDID_FIRMWARE)
+
+/* Backward compatibility for drm_kms_helper.edid_firmware */
+static int edid_firmware_set(const char *val, const struct kernel_param *kp)
+{
+	DRM_NOTE("drm_kms_firmware.edid_firmware is deprecated, please use drm.edid_firmware intead.\n");
+
+	return __drm_set_edid_firmware_path(val);
+}
+
+static int edid_firmware_get(char *buffer, const struct kernel_param *kp)
+{
+	return __drm_get_edid_firmware_path(buffer, PAGE_SIZE);
+}
+
+static const struct kernel_param_ops edid_firmware_ops = {
+	.set = edid_firmware_set,
+	.get = edid_firmware_get,
+};
+
+module_param_cb(edid_firmware, &edid_firmware_ops, NULL, 0644);
+__MODULE_PARM_TYPE(edid_firmware, "charp");
+MODULE_PARM_DESC(edid_firmware,
+		 "DEPRECATED. Use drm.edid_firmware module parameter instead.");
+
+#endif
+
 static int __init drm_kms_helper_init(void)
 {
 	int ret;

drivers/gpu/drm/drm_mode_object.c

@@ -247,8 +247,9 @@ int drm_object_property_set_value(struct drm_mode_object *obj,
 }
 EXPORT_SYMBOL(drm_object_property_set_value);
 
-int __drm_object_property_get_value(struct drm_mode_object *obj,
-				  struct drm_property *property, uint64_t *val)
+static int __drm_object_property_get_value(struct drm_mode_object *obj,
+					   struct drm_property *property,
+					   uint64_t *val)
 {
 	int i;
 

drivers/gpu/drm/drm_modeset_lock.c

@@ -39,23 +39,28 @@
  *
  * The basic usage pattern is to::
  *
- *     drm_modeset_acquire_init(&ctx)
+ *     drm_modeset_acquire_init(ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE)
  *     retry:
  *     foreach (lock in random_ordered_set_of_locks) {
- *         ret = drm_modeset_lock(lock, &ctx)
+ *         ret = drm_modeset_lock(lock, ctx)
  *         if (ret == -EDEADLK) {
- *             drm_modeset_backoff(&ctx);
- *             goto retry;
+ *             ret = drm_modeset_backoff(ctx);
+ *             if (!ret)
+ *                 goto retry;
  *         }
+ *         if (ret)
+ *             goto out;
  *     }
  *     ... do stuff ...
- *     drm_modeset_drop_locks(&ctx);
- *     drm_modeset_acquire_fini(&ctx);
+ *     out:
+ *     drm_modeset_drop_locks(ctx);
+ *     drm_modeset_acquire_fini(ctx);
  *
  * If all that is needed is a single modeset lock, then the &struct
  * drm_modeset_acquire_ctx is not needed and the locking can be simplified
- * by passing a NULL instead of ctx in the drm_modeset_lock()
- * call and, when done, by calling drm_modeset_unlock().
+ * by passing a NULL instead of ctx in the drm_modeset_lock() call or
+ * calling  drm_modeset_lock_single_interruptible(). To unlock afterwards
+ * call drm_modeset_unlock().
  *
  * On top of these per-object locks using &ww_mutex there's also an overall
  * &drm_mode_config.mutex, for protecting everything else. Mostly this means
@@ -178,7 +183,11 @@ EXPORT_SYMBOL(drm_warn_on_modeset_not_all_locked);
 /**
  * drm_modeset_acquire_init - initialize acquire context
  * @ctx: the acquire context
- * @flags: for future
+ * @flags: 0 or %DRM_MODESET_ACQUIRE_INTERRUPTIBLE
+ *
+ * When passing %DRM_MODESET_ACQUIRE_INTERRUPTIBLE to @flags,
+ * all calls to drm_modeset_lock() will perform an interruptible
+ * wait.
  */
 void drm_modeset_acquire_init(struct drm_modeset_acquire_ctx *ctx,
 		uint32_t flags)
@@ -186,6 +195,9 @@ void drm_modeset_acquire_init(struct drm_modeset_acquire_ctx *ctx,
 	memset(ctx, 0, sizeof(*ctx));
 	ww_acquire_init(&ctx->ww_ctx, &crtc_ww_class);
 	INIT_LIST_HEAD(&ctx->locked);
+
+	if (flags & DRM_MODESET_ACQUIRE_INTERRUPTIBLE)
+		ctx->interruptible = true;
 }
 EXPORT_SYMBOL(drm_modeset_acquire_init);
 
@@ -261,8 +273,19 @@ static inline int modeset_lock(struct drm_modeset_lock *lock,
 	return ret;
 }
 
-static int modeset_backoff(struct drm_modeset_acquire_ctx *ctx,
-		bool interruptible)
+/**
+ * drm_modeset_backoff - deadlock avoidance backoff
+ * @ctx: the acquire context
+ *
+ * If deadlock is detected (ie. drm_modeset_lock() returns -EDEADLK),
+ * you must call this function to drop all currently held locks and
+ * block until the contended lock becomes available.
+ *
+ * This function returns 0 on success, or -ERESTARTSYS if this context
+ * is initialized with %DRM_MODESET_ACQUIRE_INTERRUPTIBLE and the
+ * wait has been interrupted.
+ */
+int drm_modeset_backoff(struct drm_modeset_acquire_ctx *ctx)
 {
 	struct drm_modeset_lock *contended = ctx->contended;
 
@@ -273,35 +296,10 @@ static int modeset_backoff(struct drm_modeset_acquire_ctx *ctx,
 
 	drm_modeset_drop_locks(ctx);
 
-	return modeset_lock(contended, ctx, interruptible, true);
-}
-
-/**
- * drm_modeset_backoff - deadlock avoidance backoff
- * @ctx: the acquire context
- *
- * If deadlock is detected (ie. drm_modeset_lock() returns -EDEADLK),
- * you must call this function to drop all currently held locks and
- * block until the contended lock becomes available.
- */
-void drm_modeset_backoff(struct drm_modeset_acquire_ctx *ctx)
-{
-	modeset_backoff(ctx, false);
+	return modeset_lock(contended, ctx, ctx->interruptible, true);
 }
 EXPORT_SYMBOL(drm_modeset_backoff);
 
-/**
- * drm_modeset_backoff_interruptible - deadlock avoidance backoff
- * @ctx: the acquire context
- *
- * Interruptible version of drm_modeset_backoff()
- */
-int drm_modeset_backoff_interruptible(struct drm_modeset_acquire_ctx *ctx)
-{
-	return modeset_backoff(ctx, true);
-}
-EXPORT_SYMBOL(drm_modeset_backoff_interruptible);
-
 /**
  * drm_modeset_lock_init - initialize lock
  * @lock: lock to init
@@ -324,14 +322,18 @@ EXPORT_SYMBOL(drm_modeset_lock_init);
  * deadlock scenario has been detected and it is an error to attempt
  * to take any more locks without first calling drm_modeset_backoff().
  *
+ * If the @ctx is not NULL and initialized with
+ * %DRM_MODESET_ACQUIRE_INTERRUPTIBLE, this function will fail with
+ * -ERESTARTSYS when interrupted.
+ *
  * If @ctx is NULL then the function call behaves like a normal,
- * non-nesting mutex_lock() call.
+ * uninterruptible non-nesting mutex_lock() call.
  */
 int drm_modeset_lock(struct drm_modeset_lock *lock,
 		struct drm_modeset_acquire_ctx *ctx)
 {
 	if (ctx)
-		return modeset_lock(lock, ctx, false, false);
+		return modeset_lock(lock, ctx, ctx->interruptible, false);
 
 	ww_mutex_lock(&lock->mutex, NULL);
 	return 0;
@@ -339,21 +341,19 @@ int drm_modeset_lock(struct drm_modeset_lock *lock,
 EXPORT_SYMBOL(drm_modeset_lock);
 
 /**
- * drm_modeset_lock_interruptible - take modeset lock
+ * drm_modeset_lock_single_interruptible - take a single modeset lock
  * @lock: lock to take
- * @ctx: acquire ctx
  *
- * Interruptible version of drm_modeset_lock()
+ * This function behaves as drm_modeset_lock() with a NULL context,
+ * but performs interruptible waits.
+ *
+ * This function returns 0 on success, or -ERESTARTSYS when interrupted.
  */
-int drm_modeset_lock_interruptible(struct drm_modeset_lock *lock,
-		struct drm_modeset_acquire_ctx *ctx)
+int drm_modeset_lock_single_interruptible(struct drm_modeset_lock *lock)
 {
-	if (ctx)
-		return modeset_lock(lock, ctx, true, false);
-
 	return ww_mutex_lock_interruptible(&lock->mutex, NULL);
 }
-EXPORT_SYMBOL(drm_modeset_lock_interruptible);
+EXPORT_SYMBOL(drm_modeset_lock_single_interruptible);
 
 /**
  * drm_modeset_unlock - drop modeset lock

drivers/gpu/drm/drm_plane.c

@@ -667,7 +667,7 @@ static int setplane_internal(struct drm_plane *plane,
 	struct drm_modeset_acquire_ctx ctx;
 	int ret;
 
-	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
 retry:
 	ret = drm_modeset_lock_all_ctx(plane->dev, &ctx);
 	if (ret)
@@ -678,8 +678,9 @@ retry:
 
 fail:
 	if (ret == -EDEADLK) {
-		drm_modeset_backoff(&ctx);
-		goto retry;
+		ret = drm_modeset_backoff(&ctx);
+		if (!ret)
+			goto retry;
 	}
 	drm_modeset_drop_locks(&ctx);
 	drm_modeset_acquire_fini(&ctx);
@@ -834,7 +835,7 @@ static int drm_mode_cursor_common(struct drm_device *dev,
 		return -ENOENT;
 	}
 
-	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
 retry:
 	ret = drm_modeset_lock(&crtc->mutex, &ctx);
 	if (ret)
@@ -876,8 +877,9 @@ retry:
 	}
 out:
 	if (ret == -EDEADLK) {
-		drm_modeset_backoff(&ctx);
-		goto retry;
+		ret = drm_modeset_backoff(&ctx);
+		if (!ret)
+			goto retry;
 	}
 
 	drm_modeset_drop_locks(&ctx);
@@ -985,7 +987,7 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
 		return -EINVAL;
 	}
 
-	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE);
 retry:
 	ret = drm_modeset_lock(&crtc->mutex, &ctx);
 	if (ret)
@@ -1074,8 +1076,9 @@ out:
 	crtc->primary->old_fb = NULL;
 
 	if (ret == -EDEADLK) {
-		drm_modeset_backoff(&ctx);
-		goto retry;
+		ret = drm_modeset_backoff(&ctx);
+		if (!ret)
+			goto retry;
 	}
 
 	drm_modeset_drop_locks(&ctx);

drivers/gpu/drm/drm_probe_helper.c

@@ -353,8 +353,6 @@ EXPORT_SYMBOL(drm_helper_probe_detect);
  *    drm_mode_probed_add(). New modes start their life with status as OK.
  *    Modes are added from a single source using the following priority order.
  *
- *    - debugfs 'override_edid' (used for testing only)
- *    - firmware EDID (drm_load_edid_firmware())
  *    - &drm_connector_helper_funcs.get_modes vfunc
  *    - if the connector status is connector_status_connected, standard
  *      VESA DMT modes up to 1024x768 are automatically added
@@ -483,22 +481,7 @@ retry:
 		goto prune;
 	}
 
-	if (connector->override_edid) {
-		struct edid *edid = (struct edid *) connector->edid_blob_ptr->data;
-
-		count = drm_add_edid_modes(connector, edid);
-		drm_edid_to_eld(connector, edid);
-	} else {
-		struct edid *edid = drm_load_edid_firmware(connector);
-		if (!IS_ERR_OR_NULL(edid)) {
-			drm_mode_connector_update_edid_property(connector, edid);
-			count = drm_add_edid_modes(connector, edid);
-			drm_edid_to_eld(connector, edid);
-			kfree(edid);
-		}
-		if (count == 0)
-			count = (*connector_funcs->get_modes)(connector);
-	}
+	count = (*connector_funcs->get_modes)(connector);
 
 	if (count == 0 && connector->status == connector_status_connected)
 		count = drm_add_modes_noedid(connector, 1024, 768);

drivers/gpu/drm/drm_scdc_helper.c

@@ -134,7 +134,6 @@ EXPORT_SYMBOL(drm_scdc_write);
  * Returns:
  * True if the scrambling is enabled, false otherwise.
  */
-
 bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
 {
 	u8 status;
@@ -142,7 +141,7 @@ bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
 
 	ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read scrambling status, error %d\n", ret);
+		DRM_ERROR("Failed to read scrambling status: %d\n", ret);
 		return false;
 	}
 
@@ -162,7 +161,6 @@ EXPORT_SYMBOL(drm_scdc_get_scrambling_status);
  * Returns:
  * True if scrambling is set/reset successfully, false otherwise.
  */
-
 bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 {
 	u8 config;
@@ -170,7 +168,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
+		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
 		return false;
 	}
 
@@ -181,7 +179,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to enable scrambling, error %d\n", ret);
+		DRM_ERROR("Failed to enable scrambling: %d\n", ret);
 		return false;
 	}
 
@@ -225,7 +223,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to read tmds config, err=%d\n", ret);
+		DRM_ERROR("Failed to read TMDS config: %d\n", ret);
 		return false;
 	}
 
@@ -236,7 +234,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
 
 	ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config);
 	if (ret < 0) {
-		DRM_ERROR("Failed to set TMDS clock ratio, error %d\n", ret);
+		DRM_ERROR("Failed to set TMDS clock ratio: %d\n", ret);
 		return false;
 	}
 

drivers/gpu/drm/drm_syncobj.c

@@ -417,8 +417,8 @@ static int drm_syncobj_fd_to_handle(struct drm_file *file_private,
 	return 0;
 }
 
-int drm_syncobj_import_sync_file_fence(struct drm_file *file_private,
-				       int fd, int handle)
+static int drm_syncobj_import_sync_file_fence(struct drm_file *file_private,
+					      int fd, int handle)
 {
 	struct dma_fence *fence = sync_file_get_fence(fd);
 	struct drm_syncobj *syncobj;
@@ -438,8 +438,8 @@ int drm_syncobj_import_sync_file_fence(struct drm_file *file_private,
 	return 0;
 }
 
-int drm_syncobj_export_sync_file(struct drm_file *file_private,
-				 int handle, int *p_fd)
+static int drm_syncobj_export_sync_file(struct drm_file *file_private,
+					int handle, int *p_fd)
 {
 	int ret;
 	struct dma_fence *fence;

drivers/gpu/drm/drm_trace.h

@@ -61,5 +61,5 @@ TRACE_EVENT(drm_vblank_event_delivered,
 
 /* This part must be outside protection */
 #undef TRACE_INCLUDE_PATH
-#define TRACE_INCLUDE_PATH .
+#define TRACE_INCLUDE_PATH ../../drivers/gpu/drm
 #include <trace/define_trace.h>

drivers/gpu/drm/exynos/exynos_drm_mic.c

@@ -420,11 +420,7 @@ static int exynos_mic_probe(struct platform_device *pdev)
 	mic->bridge.funcs = &mic_bridge_funcs;
 	mic->bridge.of_node = dev->of_node;
 
-	ret = drm_bridge_add(&mic->bridge);
-	if (ret) {
-		DRM_ERROR("mic: Failed to add MIC to the global bridge list\n");
-		return ret;
-	}
+	drm_bridge_add(&mic->bridge);
 
 	pm_runtime_enable(dev);
 

drivers/gpu/drm/gma500/cdv_intel_dp.c

@@ -1901,10 +1901,8 @@ cdv_intel_dp_destroy(struct drm_connector *connector)
 
 	if (is_edp(gma_encoder)) {
 	/*	cdv_intel_panel_destroy_backlight(connector->dev); */
-		if (intel_dp->panel_fixed_mode) {
-			kfree(intel_dp->panel_fixed_mode);
-			intel_dp->panel_fixed_mode = NULL;
-		}
+		kfree(intel_dp->panel_fixed_mode);
+		intel_dp->panel_fixed_mode = NULL;
 	}
 	i2c_del_adapter(&intel_dp->adapter);
 	drm_connector_unregister(connector);

drivers/gpu/drm/gma500/mdfld_intel_display.c

@@ -99,7 +99,7 @@ void mdfldWaitForPipeEnable(struct drm_device *dev, int pipe)
 	/* Wait for for the pipe enable to take effect. */
 	for (count = 0; count < COUNT_MAX; count++) {
 		temp = REG_READ(map->conf);
-		if ((temp & PIPEACONF_PIPE_STATE) == 1)
+		if (temp & PIPEACONF_PIPE_STATE)
 			break;
 	}
 }

drivers/gpu/drm/i2c/ch7006_drv.c

@@ -485,7 +485,7 @@ static int ch7006_encoder_init(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_device_id ch7006_ids[] = {
+static const struct i2c_device_id ch7006_ids[] = {
 	{ "ch7006", 0 },
 	{ }
 };

drivers/gpu/drm/i2c/sil164_drv.c

@@ -415,7 +415,7 @@ sil164_encoder_init(struct i2c_client *client,
 	return 0;
 }
 
-static struct i2c_device_id sil164_ids[] = {
+static const struct i2c_device_id sil164_ids[] = {
 	{ "sil164", 0 },
 	{ }
 };

drivers/gpu/drm/i2c/tda998x_drv.c

@@ -1746,7 +1746,7 @@ static const struct of_device_id tda998x_dt_ids[] = {
 MODULE_DEVICE_TABLE(of, tda998x_dt_ids);
 #endif
 
-static struct i2c_device_id tda998x_ids[] = {
+static const struct i2c_device_id tda998x_ids[] = {
 	{ "tda998x", 0 },
 	{ }
 };

drivers/gpu/drm/i915/i915_drv.h

@@ -707,8 +707,7 @@ struct drm_i915_display_funcs {
 			    struct drm_atomic_state *old_state);
 	void (*crtc_disable)(struct intel_crtc_state *old_crtc_state,
 			     struct drm_atomic_state *old_state);
-	void (*update_crtcs)(struct drm_atomic_state *state,
-			     unsigned int *crtc_vblank_mask);
+	void (*update_crtcs)(struct drm_atomic_state *state);
 	void (*audio_codec_enable)(struct drm_connector *connector,
 				   struct intel_encoder *encoder,
 				   const struct drm_display_mode *adjusted_mode);

drivers/gpu/drm/i915/intel_display.c

@@ -12129,73 +12129,10 @@ u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
 	return dev->driver->get_vblank_counter(dev, crtc->pipe);
 }
 
-static void intel_atomic_wait_for_vblanks(struct drm_device *dev,
-					  struct drm_i915_private *dev_priv,
-					  unsigned crtc_mask)
-{
-	unsigned last_vblank_count[I915_MAX_PIPES];
-	enum pipe pipe;
-	int ret;
-
-	if (!crtc_mask)
-		return;
-
-	for_each_pipe(dev_priv, pipe) {
-		struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv,
-								  pipe);
-
-		if (!((1 << pipe) & crtc_mask))
-			continue;
-
-		ret = drm_crtc_vblank_get(&crtc->base);
-		if (WARN_ON(ret != 0)) {
-			crtc_mask &= ~(1 << pipe);
-			continue;
-		}
-
-		last_vblank_count[pipe] = drm_crtc_vblank_count(&crtc->base);
-	}
-
-	for_each_pipe(dev_priv, pipe) {
-		struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv,
-								  pipe);
-		long lret;
-
-		if (!((1 << pipe) & crtc_mask))
-			continue;
-
-		lret = wait_event_timeout(dev->vblank[pipe].queue,
-				last_vblank_count[pipe] !=
-					drm_crtc_vblank_count(&crtc->base),
-				msecs_to_jiffies(50));
-
-		WARN(!lret, "pipe %c vblank wait timed out\n", pipe_name(pipe));
-
-		drm_crtc_vblank_put(&crtc->base);
-	}
-}
-
-static bool needs_vblank_wait(struct intel_crtc_state *crtc_state)
-{
-	/* fb updated, need to unpin old fb */
-	if (crtc_state->fb_changed)
-		return true;
-
-	/* wm changes, need vblank before final wm's */
-	if (crtc_state->update_wm_post)
-		return true;
-
-	if (crtc_state->wm.need_postvbl_update)
-		return true;
-
-	return false;
-}
-
 static void intel_update_crtc(struct drm_crtc *crtc,
 			      struct drm_atomic_state *state,
 			      struct drm_crtc_state *old_crtc_state,
-			      struct drm_crtc_state *new_crtc_state,
-			      unsigned int *crtc_vblank_mask)
+			      struct drm_crtc_state *new_crtc_state)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
@@ -12218,13 +12155,9 @@ static void intel_update_crtc(struct drm_crtc *crtc,
 	}
 
 	drm_atomic_helper_commit_planes_on_crtc(old_crtc_state);
-
-	if (needs_vblank_wait(pipe_config))
-		*crtc_vblank_mask |= drm_crtc_mask(crtc);
 }
 
-static void intel_update_crtcs(struct drm_atomic_state *state,
-			       unsigned int *crtc_vblank_mask)
+static void intel_update_crtcs(struct drm_atomic_state *state)
 {
 	struct drm_crtc *crtc;
 	struct drm_crtc_state *old_crtc_state, *new_crtc_state;
@@ -12235,12 +12168,11 @@ static void intel_update_crtcs(struct drm_atomic_state *state,
 			continue;
 
 		intel_update_crtc(crtc, state, old_crtc_state,
-				  new_crtc_state, crtc_vblank_mask);
+				  new_crtc_state);
 	}
 }
 
-static void skl_update_crtcs(struct drm_atomic_state *state,
-			     unsigned int *crtc_vblank_mask)
+static void skl_update_crtcs(struct drm_atomic_state *state)
 {
 	struct drm_i915_private *dev_priv = to_i915(state->dev);
 	struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
@@ -12299,7 +12231,7 @@ static void skl_update_crtcs(struct drm_atomic_state *state,
 				vbl_wait = true;
 
 			intel_update_crtc(crtc, state, old_crtc_state,
-					  new_crtc_state, crtc_vblank_mask);
+					  new_crtc_state);
 
 			if (vbl_wait)
 				intel_wait_for_vblank(dev_priv, pipe);
@@ -12361,7 +12293,6 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	struct intel_crtc_state *intel_cstate;
 	bool hw_check = intel_state->modeset;
 	u64 put_domains[I915_MAX_PIPES] = {};
-	unsigned crtc_vblank_mask = 0;
 	int i;
 
 	intel_atomic_commit_fence_wait(intel_state);
@@ -12451,7 +12382,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	}
 
 	/* Now enable the clocks, plane, pipe, and connectors that we set up. */
-	dev_priv->display.update_crtcs(state, &crtc_vblank_mask);
+	dev_priv->display.update_crtcs(state);
 
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
@@ -12462,8 +12393,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state)
 	 * - switch over to the vblank wait helper in the core after that since
 	 *   we don't need out special handling any more.
 	 */
-	if (!state->legacy_cursor_update)
-		intel_atomic_wait_for_vblanks(dev, dev_priv, crtc_vblank_mask);
+	drm_atomic_helper_wait_for_flip_done(dev, state);
 
 	/*
 	 * Now that the vblank has passed, we can go ahead and program the
@@ -13061,6 +12991,14 @@ intel_legacy_cursor_update(struct drm_plane *plane,
 		goto slow;
 
 	old_plane_state = plane->state;
+	/*
+	 * Don't do an async update if there is an outstanding commit modifying
+	 * the plane.  This prevents our async update's changes from getting
+	 * overridden by a previous synchronous update's state.
+	 */
+	if (old_plane_state->commit &&
+	    !try_wait_for_completion(&old_plane_state->commit->hw_done))
+		goto slow;
 
 	/*
 	 * If any parameters change that may affect watermarks,
@@ -13120,17 +13058,12 @@ intel_legacy_cursor_update(struct drm_plane *plane,
 	}
 
 	old_fb = old_plane_state->fb;
-	old_vma = to_intel_plane_state(old_plane_state)->vma;
 
 	i915_gem_track_fb(intel_fb_obj(old_fb), intel_fb_obj(fb),
 			  intel_plane->frontbuffer_bit);
 
 	/* Swap plane state */
-	new_plane_state->fence = old_plane_state->fence;
-	*to_intel_plane_state(old_plane_state) = *to_intel_plane_state(new_plane_state);
-	new_plane_state->fence = NULL;
-	new_plane_state->fb = old_fb;
-	to_intel_plane_state(new_plane_state)->vma = NULL;
+	plane->state = new_plane_state;
 
 	if (plane->state->visible) {
 		trace_intel_update_plane(plane, to_intel_crtc(crtc));
@@ -13142,13 +13075,17 @@ intel_legacy_cursor_update(struct drm_plane *plane,
 		intel_plane->disable_plane(intel_plane, to_intel_crtc(crtc));
 	}
 
+	old_vma = fetch_and_zero(&to_intel_plane_state(old_plane_state)->vma);
 	if (old_vma)
 		intel_unpin_fb_vma(old_vma);
 
 out_unlock:
 	mutex_unlock(&dev_priv->drm.struct_mutex);
 out_free:
-	intel_plane_destroy_state(plane, new_plane_state);
+	if (ret)
+		intel_plane_destroy_state(plane, new_plane_state);
+	else
+		intel_plane_destroy_state(plane, old_plane_state);
 	return ret;
 
 slow:

drivers/gpu/drm/imx/imx-drm-core.c

@@ -24,6 +24,7 @@
 #include <drm/drm_fb_helper.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_plane_helper.h>
 #include <drm/drm_of.h>
@@ -105,7 +106,7 @@ static int imx_drm_atomic_check(struct drm_device *dev,
 }
 
 static const struct drm_mode_config_funcs imx_drm_mode_config_funcs = {
-	.fb_create = drm_fb_cma_create,
+	.fb_create = drm_gem_fb_create,
 	.output_poll_changed = imx_drm_output_poll_changed,
 	.atomic_check = imx_drm_atomic_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/imx/ipuv3-plane.c

@@ -18,6 +18,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_plane_helper.h>
 
 #include "video/imx-ipu-v3.h"
@@ -690,7 +691,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane,
 }
 
 static const struct drm_plane_helper_funcs ipu_plane_helper_funcs = {
-	.prepare_fb = drm_fb_cma_prepare_fb,
+	.prepare_fb = drm_gem_fb_prepare_fb,
 	.atomic_check = ipu_plane_atomic_check,
 	.atomic_disable = ipu_plane_atomic_disable,
 	.atomic_update = ipu_plane_atomic_update,

drivers/gpu/drm/mediatek/mtk_hdmi.c

@@ -1696,11 +1696,7 @@ static int mtk_drm_hdmi_probe(struct platform_device *pdev)
 
 	hdmi->bridge.funcs = &mtk_hdmi_bridge_funcs;
 	hdmi->bridge.of_node = pdev->dev.of_node;
-	ret = drm_bridge_add(&hdmi->bridge);
-	if (ret) {
-		dev_err(dev, "failed to add bridge, ret = %d\n", ret);
-		return ret;
-	}
+	drm_bridge_add(&hdmi->bridge);
 
 	ret = mtk_hdmi_clk_enable_audio(hdmi);
 	if (ret) {

drivers/gpu/drm/panel/Kconfig

@@ -63,6 +63,15 @@ config DRM_PANEL_LG_LG4573
 	  Say Y here if you want to enable support for LG4573 RGB panel.
 	  To compile this driver as a module, choose M here.
 
+config DRM_PANEL_ORISETECH_OTM8009A
+	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Orise Technology
+	  otm8009a 480x800 dsi 2dl panel.
+
 config DRM_PANEL_PANASONIC_VVX10F034N00
 	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
 	depends on OF
@@ -80,12 +89,28 @@ config DRM_PANEL_SAMSUNG_S6E3HA2
 	depends on BACKLIGHT_CLASS_DEVICE
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_SAMSUNG_S6E63J0X03
+	tristate "Samsung S6E63J0X03 DSI command mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_SEIKO_43WVF1G
+	tristate "Seiko 43WVF1G panel"
+	depends on OF
+	depends on BACKLIGHT_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y here if you want to enable support for the Seiko
+	  43WVF1G controller for 800x480 LCD panels
+
 config DRM_PANEL_SHARP_LQ101R1SX01
 	tristate "Sharp LQ101R1SX01 panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -3,10 +3,13 @@ obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
+obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o

drivers/gpu/drm/panel/panel-orisetech-otm8009a.c

@@ -0,0 +1,491 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2017
+ *
+ * Authors: Philippe Cornu <philippe.cornu@st.com>
+ *          Yannick Fertre <yannick.fertre@st.com>
+ *
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <video/mipi_display.h>
+
+#define DRV_NAME "orisetech_otm8009a"
+
+#define OTM8009A_BACKLIGHT_DEFAULT	240
+#define OTM8009A_BACKLIGHT_MAX		255
+
+/* Manufacturer Command Set */
+#define MCS_ADRSFT	0x0000	/* Address Shift Function */
+#define MCS_PANSET	0xB3A6	/* Panel Type Setting */
+#define MCS_SD_CTRL	0xC0A2	/* Source Driver Timing Setting */
+#define MCS_P_DRV_M	0xC0B4	/* Panel Driving Mode */
+#define MCS_OSC_ADJ	0xC181	/* Oscillator Adjustment for Idle/Normal mode */
+#define MCS_RGB_VID_SET	0xC1A1	/* RGB Video Mode Setting */
+#define MCS_SD_PCH_CTRL	0xC480	/* Source Driver Precharge Control */
+#define MCS_NO_DOC1	0xC48A	/* Command not documented */
+#define MCS_PWR_CTRL1	0xC580	/* Power Control Setting 1 */
+#define MCS_PWR_CTRL2	0xC590	/* Power Control Setting 2 for Normal Mode */
+#define MCS_PWR_CTRL4	0xC5B0	/* Power Control Setting 4 for DC Voltage */
+#define MCS_PANCTRLSET1	0xCB80	/* Panel Control Setting 1 */
+#define MCS_PANCTRLSET2	0xCB90	/* Panel Control Setting 2 */
+#define MCS_PANCTRLSET3	0xCBA0	/* Panel Control Setting 3 */
+#define MCS_PANCTRLSET4	0xCBB0	/* Panel Control Setting 4 */
+#define MCS_PANCTRLSET5	0xCBC0	/* Panel Control Setting 5 */
+#define MCS_PANCTRLSET6	0xCBD0	/* Panel Control Setting 6 */
+#define MCS_PANCTRLSET7	0xCBE0	/* Panel Control Setting 7 */
+#define MCS_PANCTRLSET8	0xCBF0	/* Panel Control Setting 8 */
+#define MCS_PANU2D1	0xCC80	/* Panel U2D Setting 1 */
+#define MCS_PANU2D2	0xCC90	/* Panel U2D Setting 2 */
+#define MCS_PANU2D3	0xCCA0	/* Panel U2D Setting 3 */
+#define MCS_PAND2U1	0xCCB0	/* Panel D2U Setting 1 */
+#define MCS_PAND2U2	0xCCC0	/* Panel D2U Setting 2 */
+#define MCS_PAND2U3	0xCCD0	/* Panel D2U Setting 3 */
+#define MCS_GOAVST	0xCE80	/* GOA VST Setting */
+#define MCS_GOACLKA1	0xCEA0	/* GOA CLKA1 Setting */
+#define MCS_GOACLKA3	0xCEB0	/* GOA CLKA3 Setting */
+#define MCS_GOAECLK	0xCFC0	/* GOA ECLK Setting */
+#define MCS_NO_DOC2	0xCFD0	/* Command not documented */
+#define MCS_GVDDSET	0xD800	/* GVDD/NGVDD */
+#define MCS_VCOMDC	0xD900	/* VCOM Voltage Setting */
+#define MCS_GMCT2_2P	0xE100	/* Gamma Correction 2.2+ Setting */
+#define MCS_GMCT2_2N	0xE200	/* Gamma Correction 2.2- Setting */
+#define MCS_NO_DOC3	0xF5B6	/* Command not documented */
+#define MCS_CMD2_ENA1	0xFF00	/* Enable Access Command2 "CMD2" */
+#define MCS_CMD2_ENA2	0xFF80	/* Enable Access Orise Command2 */
+
+struct otm8009a {
+	struct device *dev;
+	struct drm_panel panel;
+	struct backlight_device *bl_dev;
+	struct gpio_desc *reset_gpio;
+	bool prepared;
+	bool enabled;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 32729,
+	.hdisplay = 480,
+	.hsync_start = 480 + 120,
+	.hsync_end = 480 + 120 + 63,
+	.htotal = 480 + 120 + 63 + 120,
+	.vdisplay = 800,
+	.vsync_start = 800 + 12,
+	.vsync_end = 800 + 12 + 12,
+	.vtotal = 800 + 12 + 12 + 12,
+	.vrefresh = 50,
+	.flags = 0,
+	.width_mm = 52,
+	.height_mm = 86,
+};
+
+static inline struct otm8009a *panel_to_otm8009a(struct drm_panel *panel)
+{
+	return container_of(panel, struct otm8009a, panel);
+}
+
+static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
+				   size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0)
+		DRM_WARN("mipi dsi dcs write buffer failed\n");
+}
+
+#define dcs_write_seq(ctx, seq...)			\
+({							\
+	static const u8 d[] = { seq };			\
+	otm8009a_dcs_write_buf(ctx, d, ARRAY_SIZE(d));	\
+})
+
+#define dcs_write_cmd_at(ctx, cmd, seq...)		\
+({							\
+	dcs_write_seq(ctx, MCS_ADRSFT, (cmd) & 0xFF);	\
+	dcs_write_seq(ctx, (cmd) >> 8, seq);		\
+})
+
+static int otm8009a_init_sequence(struct otm8009a *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	/* Enter CMD2 */
+	dcs_write_cmd_at(ctx, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);
+
+	/* Enter Orise Command2 */
+	dcs_write_cmd_at(ctx, MCS_CMD2_ENA2, 0x80, 0x09);
+
+	dcs_write_cmd_at(ctx, MCS_SD_PCH_CTRL, 0x30);
+	mdelay(10);
+
+	dcs_write_cmd_at(ctx, MCS_NO_DOC1, 0x40);
+	mdelay(10);
+
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL4 + 1, 0xA9);
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 1, 0x34);
+	dcs_write_cmd_at(ctx, MCS_P_DRV_M, 0x50);
+	dcs_write_cmd_at(ctx, MCS_VCOMDC, 0x4E);
+	dcs_write_cmd_at(ctx, MCS_OSC_ADJ, 0x66); /* 65Hz */
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 2, 0x01);
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 5, 0x34);
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 4, 0x33);
+	dcs_write_cmd_at(ctx, MCS_GVDDSET, 0x79, 0x79);
+	dcs_write_cmd_at(ctx, MCS_SD_CTRL + 1, 0x1B);
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL1 + 2, 0x83);
+	dcs_write_cmd_at(ctx, MCS_SD_PCH_CTRL + 1, 0x83);
+	dcs_write_cmd_at(ctx, MCS_RGB_VID_SET, 0x0E);
+	dcs_write_cmd_at(ctx, MCS_PANSET, 0x00, 0x01);
+
+	dcs_write_cmd_at(ctx, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
+	dcs_write_cmd_at(ctx, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
+			 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(ctx, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
+			 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(ctx, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
+			 0x01, 0x02, 0x00, 0x00);
+
+	dcs_write_cmd_at(ctx, MCS_NO_DOC2, 0x00);
+
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
+			 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
+			 4, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+	dcs_write_cmd_at(ctx, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+			 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
+
+	dcs_write_cmd_at(ctx, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
+			 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(ctx, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
+	dcs_write_cmd_at(ctx, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(ctx, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
+			 0x00, 0x00, 0x00, 0x00);
+	dcs_write_cmd_at(ctx, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
+	dcs_write_cmd_at(ctx, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
+			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
+
+	dcs_write_cmd_at(ctx, MCS_PWR_CTRL1 + 1, 0x66);
+
+	dcs_write_cmd_at(ctx, MCS_NO_DOC3, 0x06);
+
+	dcs_write_cmd_at(ctx, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
+			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
+			 0x01);
+	dcs_write_cmd_at(ctx, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
+			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
+			 0x01);
+
+	/* Exit CMD2 */
+	dcs_write_cmd_at(ctx, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);
+
+	ret = mipi_dsi_dcs_nop(dsi);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret)
+		return ret;
+
+	/* Wait for sleep out exit */
+	mdelay(120);
+
+	/* Default portrait 480x800 rgb24 */
+	dcs_write_seq(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0,
+					      default_mode.hdisplay - 1);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1);
+	if (ret)
+		return ret;
+
+	/* See otm8009a driver documentation for pixel format descriptions */
+	ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT |
+					    MIPI_DCS_PIXEL_FMT_24BIT << 4);
+	if (ret)
+		return ret;
+
+	/* Disable CABC feature */
+	dcs_write_seq(ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_nop(dsi);
+	if (ret)
+		return ret;
+
+	/* Send Command GRAM memory write (no parameters) */
+	dcs_write_seq(ctx, MIPI_DCS_WRITE_MEMORY_START);
+
+	return 0;
+}
+
+static int otm8009a_disable(struct drm_panel *panel)
+{
+	struct otm8009a *ctx = panel_to_otm8009a(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (!ctx->enabled)
+		return 0; /* This is not an issue so we return 0 here */
+
+	/* Power off the backlight. Note: end-user still controls brightness */
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+	ret = backlight_update_status(ctx->bl_dev);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret)
+		return ret;
+
+	msleep(120);
+
+	ctx->enabled = false;
+
+	return 0;
+}
+
+static int otm8009a_unprepare(struct drm_panel *panel)
+{
+	struct otm8009a *ctx = panel_to_otm8009a(panel);
+
+	if (!ctx->prepared)
+		return 0;
+
+	if (ctx->reset_gpio) {
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		msleep(20);
+	}
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int otm8009a_prepare(struct drm_panel *panel)
+{
+	struct otm8009a *ctx = panel_to_otm8009a(panel);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	if (ctx->reset_gpio) {
+		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		msleep(20);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+		msleep(100);
+	}
+
+	ret = otm8009a_init_sequence(ctx);
+	if (ret)
+		return ret;
+
+	ctx->prepared = true;
+
+	/*
+	 * Power on the backlight. Note: end-user still controls brightness
+	 * Note: ctx->prepared must be true before updating the backlight.
+	 */
+	ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+	backlight_update_status(ctx->bl_dev);
+
+	return 0;
+}
+
+static int otm8009a_enable(struct drm_panel *panel)
+{
+	struct otm8009a *ctx = panel_to_otm8009a(panel);
+
+	ctx->enabled = true;
+
+	return 0;
+}
+
+static int otm8009a_get_modes(struct drm_panel *panel)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+			  default_mode.hdisplay, default_mode.vdisplay,
+			  default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(panel->connector, mode);
+
+	panel->connector->display_info.width_mm = mode->width_mm;
+	panel->connector->display_info.height_mm = mode->height_mm;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs otm8009a_drm_funcs = {
+	.disable   = otm8009a_disable,
+	.unprepare = otm8009a_unprepare,
+	.prepare   = otm8009a_prepare,
+	.enable    = otm8009a_enable,
+	.get_modes = otm8009a_get_modes,
+};
+
+/*
+ * DSI-BASED BACKLIGHT
+ */
+
+static int otm8009a_backlight_update_status(struct backlight_device *bd)
+{
+	struct otm8009a *ctx = bl_get_data(bd);
+	u8 data[2];
+
+	if (!ctx->prepared) {
+		DRM_DEBUG("lcd not ready yet for setting its backlight!\n");
+		return -ENXIO;
+	}
+
+	if (bd->props.power <= FB_BLANK_NORMAL) {
+		/* Power on the backlight with the requested brightness
+		 * Note We can not use mipi_dsi_dcs_set_display_brightness()
+		 * as otm8009a driver support only 8-bit brightness (1 param).
+		 */
+		data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
+		data[1] = bd->props.brightness;
+		otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
+
+		/* set Brightness Control & Backlight on */
+		data[1] = 0x24;
+
+	} else {
+		/* Power off the backlight: set Brightness Control & Bl off */
+		data[1] = 0;
+	}
+
+	/* Update Brightness Control & Backlight */
+	data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
+	otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
+
+	return 0;
+}
+
+static const struct backlight_ops otm8009a_backlight_ops = {
+	.update_status = otm8009a_backlight_update_status,
+};
+
+static int otm8009a_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct otm8009a *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset-gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 2;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_LPM;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &otm8009a_drm_funcs;
+
+	ctx->bl_dev = backlight_device_register(DRV_NAME "_backlight", dev, ctx,
+						&otm8009a_backlight_ops, NULL);
+	if (IS_ERR(ctx->bl_dev)) {
+		dev_err(dev, "failed to register backlight device\n");
+		return PTR_ERR(ctx->bl_dev);
+	}
+
+	ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
+	ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+	ctx->bl_dev->props.type = BACKLIGHT_RAW;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
+		drm_panel_remove(&ctx->panel);
+		backlight_device_unregister(ctx->bl_dev);
+		return ret;
+	}
+
+	DRM_INFO(DRV_NAME "_panel %ux%u@%u %ubpp dsi %udl - ready\n",
+		 default_mode.hdisplay, default_mode.vdisplay,
+		 default_mode.vrefresh,
+		 mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+
+	return 0;
+}
+
+static int otm8009a_remove(struct mipi_dsi_device *dsi)
+{
+	struct otm8009a *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	backlight_device_unregister(ctx->bl_dev);
+
+	return 0;
+}
+
+static const struct of_device_id orisetech_otm8009a_of_match[] = {
+	{ .compatible = "orisetech,otm8009a" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, orisetech_otm8009a_of_match);
+
+static struct mipi_dsi_driver orisetech_otm8009a_driver = {
+	.probe  = otm8009a_probe,
+	.remove = otm8009a_remove,
+	.driver = {
+		.name = DRV_NAME "_panel",
+		.of_match_table = orisetech_otm8009a_of_match,
+	},
+};
+module_mipi_dsi_driver(orisetech_otm8009a_driver);
+
+MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
+MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
+MODULE_DESCRIPTION("DRM driver for Orise Tech OTM8009A MIPI DSI panel");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c

@@ -0,0 +1,532 @@
+/*
+ * MIPI-DSI based S6E63J0X03 AMOLED lcd 1.63 inch panel driver.
+ *
+ * Copyright (c) 2014-2017 Samsung Electronics Co., Ltd
+ *
+ * Inki Dae <inki.dae@samsung.com>
+ * Hoegeun Kwon <hoegeun.kwon@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+#include <linux/backlight.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <video/mipi_display.h>
+
+#define MCS_LEVEL2_KEY		0xf0
+#define MCS_MTP_KEY		0xf1
+#define MCS_MTP_SET3		0xd4
+
+#define MAX_BRIGHTNESS		100
+#define DEFAULT_BRIGHTNESS	80
+
+#define NUM_GAMMA_STEPS		9
+#define GAMMA_CMD_CNT		28
+
+#define FIRST_COLUMN 20
+
+struct s6e63j0x03 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct backlight_device *bl_dev;
+
+	struct regulator_bulk_data supplies[2];
+	struct gpio_desc *reset_gpio;
+};
+
+static const struct drm_display_mode default_mode = {
+	.clock = 4649,
+	.hdisplay = 320,
+	.hsync_start = 320 + 1,
+	.hsync_end = 320 + 1 + 1,
+	.htotal = 320 + 1 + 1 + 1,
+	.vdisplay = 320,
+	.vsync_start = 320 + 150,
+	.vsync_end = 320 + 150 + 1,
+	.vtotal = 320 + 150 + 1 + 2,
+	.vrefresh = 30,
+	.flags = 0,
+};
+
+static const unsigned char gamma_tbl[NUM_GAMMA_STEPS][GAMMA_CMD_CNT] = {
+	{	/* Gamma 10 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x7f, 0x7f, 0x7f, 0x52, 0x6b, 0x6f, 0x26,
+		0x28, 0x2d, 0x28, 0x26, 0x27, 0x33, 0x34, 0x32, 0x36, 0x36,
+		0x35, 0x00, 0xab, 0x00, 0xae, 0x00, 0xbf
+	},
+	{	/* gamma 30 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x70, 0x7f, 0x7f, 0x4e, 0x64, 0x69, 0x26,
+		0x27, 0x2a, 0x28, 0x29, 0x27, 0x31, 0x32, 0x31, 0x35, 0x34,
+		0x35, 0x00, 0xc4, 0x00, 0xca, 0x00, 0xdc
+	},
+	{	/* gamma 60 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x65, 0x7b, 0x7d, 0x5f, 0x67, 0x68, 0x2a,
+		0x28, 0x29, 0x28, 0x2a, 0x27, 0x31, 0x2f, 0x30, 0x34, 0x33,
+		0x34, 0x00, 0xd9, 0x00, 0xe4, 0x00, 0xf5
+	},
+	{	/* gamma 90 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x4d, 0x6f, 0x71, 0x67, 0x6a, 0x6c, 0x29,
+		0x28, 0x28, 0x28, 0x29, 0x27, 0x30, 0x2e, 0x30, 0x32, 0x31,
+		0x31, 0x00, 0xea, 0x00, 0xf6, 0x01, 0x09
+	},
+	{	/* gamma 120 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x3d, 0x66, 0x68, 0x69, 0x69, 0x69, 0x28,
+		0x28, 0x27, 0x28, 0x28, 0x27, 0x30, 0x2e, 0x2f, 0x31, 0x31,
+		0x30, 0x00, 0xf9, 0x01, 0x05, 0x01, 0x1b
+	},
+	{	/* gamma 150 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x31, 0x51, 0x53, 0x66, 0x66, 0x67, 0x28,
+		0x29, 0x27, 0x28, 0x27, 0x27, 0x2e, 0x2d, 0x2e, 0x31, 0x31,
+		0x30, 0x01, 0x04, 0x01, 0x11, 0x01, 0x29
+	},
+	{	/* gamma 200 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x2f, 0x4f, 0x51, 0x67, 0x65, 0x65, 0x29,
+		0x2a, 0x28, 0x27, 0x25, 0x26, 0x2d, 0x2c, 0x2c, 0x30, 0x30,
+		0x30, 0x01, 0x14, 0x01, 0x23, 0x01, 0x3b
+	},
+	{	/* gamma 240 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x2c, 0x4d, 0x50, 0x65, 0x63, 0x64, 0x2a,
+		0x2c, 0x29, 0x26, 0x24, 0x25, 0x2c, 0x2b, 0x2b, 0x30, 0x30,
+		0x30, 0x01, 0x1e, 0x01, 0x2f, 0x01, 0x47
+	},
+	{	/* gamma 300 */
+		MCS_MTP_SET3,
+		0x00, 0x00, 0x00, 0x38, 0x61, 0x64, 0x65, 0x63, 0x64, 0x28,
+		0x2a, 0x27, 0x26, 0x23, 0x25, 0x2b, 0x2b, 0x2a, 0x30, 0x2f,
+		0x30, 0x01, 0x2d, 0x01, 0x3f, 0x01, 0x57
+	}
+};
+
+static inline struct s6e63j0x03 *panel_to_s6e63j0x03(struct drm_panel *panel)
+{
+	return container_of(panel, struct s6e63j0x03, panel);
+}
+
+static inline ssize_t s6e63j0x03_dcs_write_seq(struct s6e63j0x03 *ctx,
+					const void *seq, size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	return mipi_dsi_dcs_write_buffer(dsi, seq, len);
+}
+
+#define s6e63j0x03_dcs_write_seq_static(ctx, seq...)			\
+	({								\
+		static const u8 d[] = { seq };				\
+		s6e63j0x03_dcs_write_seq(ctx, d, ARRAY_SIZE(d));	\
+	})
+
+static inline int s6e63j0x03_enable_lv2_command(struct s6e63j0x03 *ctx)
+{
+	return s6e63j0x03_dcs_write_seq_static(ctx, MCS_LEVEL2_KEY, 0x5a, 0x5a);
+}
+
+static inline int s6e63j0x03_apply_mtp_key(struct s6e63j0x03 *ctx, bool on)
+{
+	if (on)
+		return s6e63j0x03_dcs_write_seq_static(ctx,
+				MCS_MTP_KEY, 0x5a, 0x5a);
+
+	return s6e63j0x03_dcs_write_seq_static(ctx, MCS_MTP_KEY, 0xa5, 0xa5);
+}
+
+static int s6e63j0x03_power_on(struct s6e63j0x03 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		return ret;
+
+	msleep(30);
+
+	gpiod_set_value(ctx->reset_gpio, 1);
+	usleep_range(1000, 2000);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(5000, 6000);
+
+	return 0;
+}
+
+static int s6e63j0x03_power_off(struct s6e63j0x03 *ctx)
+{
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static unsigned int s6e63j0x03_get_brightness_index(unsigned int brightness)
+{
+	unsigned int index;
+
+	index = brightness / (MAX_BRIGHTNESS / NUM_GAMMA_STEPS);
+
+	if (index >= NUM_GAMMA_STEPS)
+		index = NUM_GAMMA_STEPS - 1;
+
+	return index;
+}
+
+static int s6e63j0x03_update_gamma(struct s6e63j0x03 *ctx,
+					unsigned int brightness)
+{
+	struct backlight_device *bl_dev = ctx->bl_dev;
+	unsigned int index = s6e63j0x03_get_brightness_index(brightness);
+	int ret;
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, true);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_dcs_write_seq(ctx, gamma_tbl[index], GAMMA_CMD_CNT);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, false);
+	if (ret < 0)
+		return ret;
+
+	bl_dev->props.brightness = brightness;
+
+	return 0;
+}
+
+static int s6e63j0x03_set_brightness(struct backlight_device *bl_dev)
+{
+	struct s6e63j0x03 *ctx = bl_get_data(bl_dev);
+	unsigned int brightness = bl_dev->props.brightness;
+
+	return s6e63j0x03_update_gamma(ctx, brightness);
+}
+
+static const struct backlight_ops s6e63j0x03_bl_ops = {
+	.update_status = s6e63j0x03_set_brightness,
+};
+
+static int s6e63j0x03_disable(struct drm_panel *panel)
+{
+	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		return ret;
+
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+
+	msleep(120);
+
+	return 0;
+}
+
+static int s6e63j0x03_unprepare(struct drm_panel *panel)
+{
+	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
+	int ret;
+
+	ret = s6e63j0x03_power_off(ctx);
+	if (ret < 0)
+		return ret;
+
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	return 0;
+}
+
+static int s6e63j0x03_panel_init(struct s6e63j0x03 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	ret = s6e63j0x03_enable_lv2_command(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, true);
+	if (ret < 0)
+		return ret;
+
+	/* set porch adjustment */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf2, 0x1c, 0x28);
+	if (ret < 0)
+		return ret;
+
+	/* set frame freq */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb5, 0x00, 0x02, 0x00);
+	if (ret < 0)
+		return ret;
+
+	/* set caset, paset */
+	ret = mipi_dsi_dcs_set_column_address(dsi, FIRST_COLUMN,
+		default_mode.hdisplay - 1 + FIRST_COLUMN);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0, default_mode.vdisplay - 1);
+	if (ret < 0)
+		return ret;
+
+	/* set ltps timming 0, 1 */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf8, 0x08, 0x08, 0x08, 0x17,
+		0x00, 0x2a, 0x02, 0x26, 0x00, 0x00, 0x02, 0x00, 0x00);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xf7, 0x02);
+	if (ret < 0)
+		return ret;
+
+	/* set param pos te_edge */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb0, 0x01);
+	if (ret < 0)
+		return ret;
+
+	/* set te rising edge */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xe2, 0x0f);
+	if (ret < 0)
+		return ret;
+
+	/* set param pos default */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb0, 0x00);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, false);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int s6e63j0x03_prepare(struct drm_panel *panel)
+{
+	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
+	int ret;
+
+	ret = s6e63j0x03_power_on(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_panel_init(ctx);
+	if (ret < 0)
+		goto err;
+
+	ctx->bl_dev->props.power = FB_BLANK_NORMAL;
+
+	return 0;
+
+err:
+	s6e63j0x03_power_off(ctx);
+	return ret;
+}
+
+static int s6e63j0x03_enable(struct drm_panel *panel)
+{
+	struct s6e63j0x03 *ctx = panel_to_s6e63j0x03(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	msleep(120);
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, true);
+	if (ret < 0)
+		return ret;
+
+	/* set elvss_cond */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx, 0xb1, 0x00, 0x09);
+	if (ret < 0)
+		return ret;
+
+	/* set pos */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx,
+		MIPI_DCS_SET_ADDRESS_MODE, 0x40);
+	if (ret < 0)
+		return ret;
+
+	/* set default white brightness */
+	ret = mipi_dsi_dcs_set_display_brightness(dsi, 0x00ff);
+	if (ret < 0)
+		return ret;
+
+	/* set white ctrl */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx,
+		MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x20);
+	if (ret < 0)
+		return ret;
+
+	/* set acl off */
+	ret = s6e63j0x03_dcs_write_seq_static(ctx,
+		MIPI_DCS_WRITE_POWER_SAVE, 0x00);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+	if (ret < 0)
+		return ret;
+
+	ret = s6e63j0x03_apply_mtp_key(ctx, false);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0)
+		return ret;
+
+	ctx->bl_dev->props.power = FB_BLANK_UNBLANK;
+
+	return 0;
+}
+
+static int s6e63j0x03_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		DRM_ERROR("failed to add mode %ux%ux@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	connector->display_info.width_mm = 29;
+	connector->display_info.height_mm = 29;
+
+	return 1;
+}
+
+static const struct drm_panel_funcs s6e63j0x03_funcs = {
+	.disable = s6e63j0x03_disable,
+	.unprepare = s6e63j0x03_unprepare,
+	.prepare = s6e63j0x03_prepare,
+	.enable = s6e63j0x03_enable,
+	.get_modes = s6e63j0x03_get_modes,
+};
+
+static int s6e63j0x03_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct s6e63j0x03 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(struct s6e63j0x03), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 1;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_EOT_PACKET;
+
+	ctx->supplies[0].supply = "vdd3";
+	ctx->supplies[1].supply = "vci";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0) {
+		dev_err(dev, "failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset-gpio: %ld\n",
+				PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &s6e63j0x03_funcs;
+
+	ctx->bl_dev = backlight_device_register("s6e63j0x03", dev, ctx,
+						&s6e63j0x03_bl_ops, NULL);
+	if (IS_ERR(ctx->bl_dev)) {
+		dev_err(dev, "failed to register backlight device\n");
+		return PTR_ERR(ctx->bl_dev);
+	}
+
+	ctx->bl_dev->props.max_brightness = MAX_BRIGHTNESS;
+	ctx->bl_dev->props.brightness = DEFAULT_BRIGHTNESS;
+	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret < 0)
+		goto unregister_backlight;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		goto remove_panel;
+
+	return ret;
+
+remove_panel:
+	drm_panel_remove(&ctx->panel);
+
+unregister_backlight:
+	backlight_device_unregister(ctx->bl_dev);
+
+	return ret;
+}
+
+static int s6e63j0x03_remove(struct mipi_dsi_device *dsi)
+{
+	struct s6e63j0x03 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	backlight_device_unregister(ctx->bl_dev);
+
+	return 0;
+}
+
+static const struct of_device_id s6e63j0x03_of_match[] = {
+	{ .compatible = "samsung,s6e63j0x03" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s6e63j0x03_of_match);
+
+static struct mipi_dsi_driver s6e63j0x03_driver = {
+	.probe = s6e63j0x03_probe,
+	.remove = s6e63j0x03_remove,
+	.driver = {
+		.name = "panel_samsung_s6e63j0x03",
+		.of_match_table = s6e63j0x03_of_match,
+	},
+};
+module_mipi_dsi_driver(s6e63j0x03_driver);
+
+MODULE_AUTHOR("Inki Dae <inki.dae@samsung.com>");
+MODULE_AUTHOR("Hoegeun Kwon <hoegeun.kwon@samsung.com>");
+MODULE_DESCRIPTION("MIPI-DSI based s6e63j0x03 AMOLED LCD Panel Driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/panel/panel-seiko-43wvf1g.c

@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2017 NXP Semiconductors.
+ * Author: Marco Franchi <marco.franchi@nxp.com>
+ *
+ * Based on Panel Simple driver by Thierry Reding <treding@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/backlight.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_panel.h>
+
+#include <video/display_timing.h>
+#include <video/videomode.h>
+
+struct seiko_panel_desc {
+	const struct drm_display_mode *modes;
+	unsigned int num_modes;
+	const struct display_timing *timings;
+	unsigned int num_timings;
+
+	unsigned int bpc;
+
+	/**
+	 * @width: width (in millimeters) of the panel's active display area
+	 * @height: height (in millimeters) of the panel's active display area
+	 */
+	struct {
+		unsigned int width;
+		unsigned int height;
+	} size;
+
+	u32 bus_format;
+	u32 bus_flags;
+};
+
+struct seiko_panel {
+	struct drm_panel base;
+	bool prepared;
+	bool enabled;
+	const struct seiko_panel_desc *desc;
+	struct backlight_device *backlight;
+	struct regulator *dvdd;
+	struct regulator *avdd;
+};
+
+static inline struct seiko_panel *to_seiko_panel(struct drm_panel *panel)
+{
+	return container_of(panel, struct seiko_panel, base);
+}
+
+static int seiko_panel_get_fixed_modes(struct seiko_panel *panel)
+{
+	struct drm_connector *connector = panel->base.connector;
+	struct drm_device *drm = panel->base.drm;
+	struct drm_display_mode *mode;
+	unsigned int i, num = 0;
+
+	if (!panel->desc)
+		return 0;
+
+	for (i = 0; i < panel->desc->num_timings; i++) {
+		const struct display_timing *dt = &panel->desc->timings[i];
+		struct videomode vm;
+
+		videomode_from_timing(dt, &vm);
+		mode = drm_mode_create(drm);
+		if (!mode) {
+			dev_err(drm->dev, "failed to add mode %ux%u\n",
+				dt->hactive.typ, dt->vactive.typ);
+			continue;
+		}
+
+		drm_display_mode_from_videomode(&vm, mode);
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+
+		if (panel->desc->num_timings == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_probed_add(connector, mode);
+		num++;
+	}
+
+	for (i = 0; i < panel->desc->num_modes; i++) {
+		const struct drm_display_mode *m = &panel->desc->modes[i];
+
+		mode = drm_mode_duplicate(drm, m);
+		if (!mode) {
+			dev_err(drm->dev, "failed to add mode %ux%u@%u\n",
+				m->hdisplay, m->vdisplay, m->vrefresh);
+			continue;
+		}
+
+		mode->type |= DRM_MODE_TYPE_DRIVER;
+
+		if (panel->desc->num_modes == 1)
+			mode->type |= DRM_MODE_TYPE_PREFERRED;
+
+		drm_mode_set_name(mode);
+
+		drm_mode_probed_add(connector, mode);
+		num++;
+	}
+
+	connector->display_info.bpc = panel->desc->bpc;
+	connector->display_info.width_mm = panel->desc->size.width;
+	connector->display_info.height_mm = panel->desc->size.height;
+	if (panel->desc->bus_format)
+		drm_display_info_set_bus_formats(&connector->display_info,
+						 &panel->desc->bus_format, 1);
+	connector->display_info.bus_flags = panel->desc->bus_flags;
+
+	return num;
+}
+
+static int seiko_panel_disable(struct drm_panel *panel)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+
+	if (!p->enabled)
+		return 0;
+
+	if (p->backlight) {
+		p->backlight->props.power = FB_BLANK_POWERDOWN;
+		p->backlight->props.state |= BL_CORE_FBBLANK;
+		backlight_update_status(p->backlight);
+	}
+
+	p->enabled = false;
+
+	return 0;
+}
+
+static int seiko_panel_unprepare(struct drm_panel *panel)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+
+	if (!p->prepared)
+		return 0;
+
+	regulator_disable(p->avdd);
+
+	/* Add a 100ms delay as per the panel datasheet */
+	msleep(100);
+
+	regulator_disable(p->dvdd);
+
+	p->prepared = false;
+
+	return 0;
+}
+
+static int seiko_panel_prepare(struct drm_panel *panel)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+	int err;
+
+	if (p->prepared)
+		return 0;
+
+	err = regulator_enable(p->dvdd);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to enable dvdd: %d\n", err);
+		return err;
+	}
+
+	/* Add a 100ms delay as per the panel datasheet */
+	msleep(100);
+
+	err = regulator_enable(p->avdd);
+	if (err < 0) {
+		dev_err(panel->dev, "failed to enable avdd: %d\n", err);
+		goto disable_dvdd;
+	}
+
+	p->prepared = true;
+
+	return 0;
+
+disable_dvdd:
+	regulator_disable(p->dvdd);
+	return err;
+}
+
+static int seiko_panel_enable(struct drm_panel *panel)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+
+	if (p->enabled)
+		return 0;
+
+	if (p->backlight) {
+		p->backlight->props.state &= ~BL_CORE_FBBLANK;
+		p->backlight->props.power = FB_BLANK_UNBLANK;
+		backlight_update_status(p->backlight);
+	}
+
+	p->enabled = true;
+
+	return 0;
+}
+
+static int seiko_panel_get_modes(struct drm_panel *panel)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+
+	/* add hard-coded panel modes */
+	return seiko_panel_get_fixed_modes(p);
+}
+
+static int seiko_panel_get_timings(struct drm_panel *panel,
+				    unsigned int num_timings,
+				    struct display_timing *timings)
+{
+	struct seiko_panel *p = to_seiko_panel(panel);
+	unsigned int i;
+
+	if (p->desc->num_timings < num_timings)
+		num_timings = p->desc->num_timings;
+
+	if (timings)
+		for (i = 0; i < num_timings; i++)
+			timings[i] = p->desc->timings[i];
+
+	return p->desc->num_timings;
+}
+
+static const struct drm_panel_funcs seiko_panel_funcs = {
+	.disable = seiko_panel_disable,
+	.unprepare = seiko_panel_unprepare,
+	.prepare = seiko_panel_prepare,
+	.enable = seiko_panel_enable,
+	.get_modes = seiko_panel_get_modes,
+	.get_timings = seiko_panel_get_timings,
+};
+
+static int seiko_panel_probe(struct device *dev,
+					const struct seiko_panel_desc *desc)
+{
+	struct device_node *backlight;
+	struct seiko_panel *panel;
+	int err;
+
+	panel = devm_kzalloc(dev, sizeof(*panel), GFP_KERNEL);
+	if (!panel)
+		return -ENOMEM;
+
+	panel->enabled = false;
+	panel->prepared = false;
+	panel->desc = desc;
+
+	panel->dvdd = devm_regulator_get(dev, "dvdd");
+	if (IS_ERR(panel->dvdd))
+		return PTR_ERR(panel->dvdd);
+
+	panel->avdd = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(panel->avdd))
+		return PTR_ERR(panel->avdd);
+
+	backlight = of_parse_phandle(dev->of_node, "backlight", 0);
+	if (backlight) {
+		panel->backlight = of_find_backlight_by_node(backlight);
+		of_node_put(backlight);
+
+		if (!panel->backlight)
+			return -EPROBE_DEFER;
+	}
+
+	drm_panel_init(&panel->base);
+	panel->base.dev = dev;
+	panel->base.funcs = &seiko_panel_funcs;
+
+	err = drm_panel_add(&panel->base);
+	if (err < 0)
+		return err;
+
+	dev_set_drvdata(dev, panel);
+
+	return 0;
+}
+
+static int seiko_panel_remove(struct platform_device *pdev)
+{
+	struct seiko_panel *panel = dev_get_drvdata(&pdev->dev);
+
+	drm_panel_detach(&panel->base);
+	drm_panel_remove(&panel->base);
+
+	seiko_panel_disable(&panel->base);
+
+	if (panel->backlight)
+		put_device(&panel->backlight->dev);
+
+	return 0;
+}
+
+static void seiko_panel_shutdown(struct platform_device *pdev)
+{
+	struct seiko_panel *panel = dev_get_drvdata(&pdev->dev);
+
+	seiko_panel_disable(&panel->base);
+}
+
+static const struct display_timing seiko_43wvf1g_timing = {
+	.pixelclock = { 33500000, 33500000, 33500000 },
+	.hactive = { 800, 800, 800 },
+	.hfront_porch = {  164, 164, 164 },
+	.hback_porch = { 89, 89, 89 },
+	.hsync_len = { 10, 10, 10 },
+	.vactive = { 480, 480, 480 },
+	.vfront_porch = { 10, 10, 10 },
+	.vback_porch = { 23, 23, 23 },
+	.vsync_len = { 10, 10, 10 },
+	.flags = DISPLAY_FLAGS_DE_LOW,
+};
+
+static const struct seiko_panel_desc seiko_43wvf1g = {
+	.timings = &seiko_43wvf1g_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 93,
+		.height = 57,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+};
+
+static const struct of_device_id platform_of_match[] = {
+	{
+		.compatible = "sii,43wvf1g",
+		.data = &seiko_43wvf1g,
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, platform_of_match);
+
+static int seiko_panel_platform_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *id;
+
+	id = of_match_node(platform_of_match, pdev->dev.of_node);
+	if (!id)
+		return -ENODEV;
+
+	return seiko_panel_probe(&pdev->dev, id->data);
+}
+
+static struct platform_driver seiko_panel_platform_driver = {
+	.driver = {
+		.name = "seiko_panel",
+		.of_match_table = platform_of_match,
+	},
+	.probe = seiko_panel_platform_probe,
+	.remove = seiko_panel_remove,
+	.shutdown = seiko_panel_shutdown,
+};
+module_platform_driver(seiko_panel_platform_driver);
+
+MODULE_AUTHOR("Marco Franchi <marco.franchi@nxp.com");
+MODULE_DESCRIPTION("Seiko 43WVF1G panel driver");
+MODULE_LICENSE("GPL v2");

drivers/gpu/drm/panel/panel-simple.c

@@ -187,8 +187,7 @@ static int panel_simple_unprepare(struct drm_panel *panel)
 	if (!p->prepared)
 		return 0;
 
-	if (p->enable_gpio)
-		gpiod_set_value_cansleep(p->enable_gpio, 0);
+	gpiod_set_value_cansleep(p->enable_gpio, 0);
 
 	regulator_disable(p->supply);
 
@@ -214,8 +213,7 @@ static int panel_simple_prepare(struct drm_panel *panel)
 		return err;
 	}
 
-	if (p->enable_gpio)
-		gpiod_set_value_cansleep(p->enable_gpio, 1);
+	gpiod_set_value_cansleep(p->enable_gpio, 1);
 
 	if (p->desc->delay.prepare)
 		msleep(p->desc->delay.prepare);
@@ -315,7 +313,8 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 						     GPIOD_OUT_LOW);
 	if (IS_ERR(panel->enable_gpio)) {
 		err = PTR_ERR(panel->enable_gpio);
-		dev_err(dev, "failed to request GPIO: %d\n", err);
+		if (err != -EPROBE_DEFER)
+			dev_err(dev, "failed to request GPIO: %d\n", err);
 		return err;
 	}
 
@@ -369,6 +368,7 @@ static int panel_simple_remove(struct device *dev)
 	drm_panel_remove(&panel->base);
 
 	panel_simple_disable(&panel->base);
+	panel_simple_unprepare(&panel->base);
 
 	if (panel->ddc)
 		put_device(&panel->ddc->dev);
@@ -384,6 +384,7 @@ static void panel_simple_shutdown(struct device *dev)
 	struct panel_simple *panel = dev_get_drvdata(dev);
 
 	panel_simple_disable(&panel->base);
+	panel_simple_unprepare(&panel->base);
 }
 
 static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = {
@@ -1522,8 +1523,8 @@ static const struct panel_desc olimex_lcd_olinuxino_43ts = {
 	.modes = &olimex_lcd_olinuxino_43ts_mode,
 	.num_modes = 1,
 	.size = {
-		.width = 105,
-		.height = 67,
+		.width = 95,
+		.height = 54,
 	},
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 };

drivers/gpu/drm/pl111/Kconfig

@@ -6,7 +6,8 @@ config DRM_PL111
 	select DRM_KMS_HELPER
 	select DRM_KMS_CMA_HELPER
 	select DRM_GEM_CMA_HELPER
-	select DRM_PANEL
+	select DRM_BRIDGE
+	select DRM_PANEL_BRIDGE
 	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
 	help
 	  Choose this option for DRM support for the PL111 CLCD controller.

drivers/gpu/drm/pl111/Makefile

@@ -1,5 +1,5 @@
-pl111_drm-y +=	pl111_connector.o \
-		pl111_display.o \
+pl111_drm-y +=	pl111_display.o \
+		pl111_versatile.o \
 		pl111_drv.o
 
 pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o

drivers/gpu/drm/pl111/pl111_connector.c

@@ -1,126 +0,0 @@
-/*
- * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
- *
- * Parts of this file were based on sources as follows:
- *
- * Copyright (c) 2006-2008 Intel Corporation
- * Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
- * Copyright (C) 2011 Texas Instruments
- *
- * This program is free software and is provided to you under the terms of the
- * GNU General Public License version 2 as published by the Free Software
- * Foundation, and any use by you of this program is subject to the terms of
- * such GNU licence.
- *
- */
-
-/**
- * pl111_drm_connector.c
- * Implementation of the connector functions for PL111 DRM
- */
-#include <linux/amba/clcd-regs.h>
-#include <linux/version.h>
-#include <linux/shmem_fs.h>
-#include <linux/dma-buf.h>
-
-#include <drm/drmP.h>
-#include <drm/drm_atomic_helper.h>
-#include <drm/drm_crtc_helper.h>
-#include <drm/drm_of.h>
-#include <drm/drm_panel.h>
-
-#include "pl111_drm.h"
-
-static void pl111_connector_destroy(struct drm_connector *connector)
-{
-	struct pl111_drm_connector *pl111_connector =
-		to_pl111_connector(connector);
-
-	if (pl111_connector->panel)
-		drm_panel_detach(pl111_connector->panel);
-
-	drm_connector_unregister(connector);
-	drm_connector_cleanup(connector);
-}
-
-static enum drm_connector_status pl111_connector_detect(struct drm_connector
-							*connector, bool force)
-{
-	struct pl111_drm_connector *pl111_connector =
-		to_pl111_connector(connector);
-
-	return (pl111_connector->panel ?
-		connector_status_connected :
-		connector_status_disconnected);
-}
-
-static int pl111_connector_helper_get_modes(struct drm_connector *connector)
-{
-	struct pl111_drm_connector *pl111_connector =
-		to_pl111_connector(connector);
-
-	if (!pl111_connector->panel)
-		return 0;
-
-	return drm_panel_get_modes(pl111_connector->panel);
-}
-
-const struct drm_connector_funcs connector_funcs = {
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = pl111_connector_destroy,
-	.detect = pl111_connector_detect,
-	.reset = drm_atomic_helper_connector_reset,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
-const struct drm_connector_helper_funcs connector_helper_funcs = {
-	.get_modes = pl111_connector_helper_get_modes,
-};
-
-/* Walks the OF graph to find the panel node and then asks DRM to look
- * up the panel.
- */
-static struct drm_panel *pl111_get_panel(struct device *dev)
-{
-	struct device_node *endpoint, *panel_node;
-	struct device_node *np = dev->of_node;
-	struct drm_panel *panel;
-
-	endpoint = of_graph_get_next_endpoint(np, NULL);
-	if (!endpoint) {
-		dev_err(dev, "no endpoint to fetch panel\n");
-		return NULL;
-	}
-
-	/* don't proceed if we have an endpoint but no panel_node tied to it */
-	panel_node = of_graph_get_remote_port_parent(endpoint);
-	of_node_put(endpoint);
-	if (!panel_node) {
-		dev_err(dev, "no valid panel node\n");
-		return NULL;
-	}
-
-	panel = of_drm_find_panel(panel_node);
-	of_node_put(panel_node);
-
-	return panel;
-}
-
-int pl111_connector_init(struct drm_device *dev)
-{
-	struct pl111_drm_dev_private *priv = dev->dev_private;
-	struct pl111_drm_connector *pl111_connector = &priv->connector;
-	struct drm_connector *connector = &pl111_connector->connector;
-
-	drm_connector_init(dev, connector, &connector_funcs,
-			   DRM_MODE_CONNECTOR_DPI);
-	drm_connector_helper_add(connector, &connector_helper_funcs);
-
-	pl111_connector->panel = pl111_get_panel(dev->dev);
-	if (pl111_connector->panel)
-		drm_panel_attach(pl111_connector->panel, connector);
-
-	return 0;
-}
-

drivers/gpu/drm/pl111/pl111_debugfs.c

@@ -22,8 +22,14 @@ static const struct {
 	REGDEF(CLCD_TIM2),
 	REGDEF(CLCD_TIM3),
 	REGDEF(CLCD_UBAS),
+	REGDEF(CLCD_LBAS),
 	REGDEF(CLCD_PL111_CNTL),
 	REGDEF(CLCD_PL111_IENB),
+	REGDEF(CLCD_PL111_RIS),
+	REGDEF(CLCD_PL111_MIS),
+	REGDEF(CLCD_PL111_ICR),
+	REGDEF(CLCD_PL111_UCUR),
+	REGDEF(CLCD_PL111_LCUR),
 };
 
 int pl111_debugfs_regs(struct seq_file *m, void *unused)

drivers/gpu/drm/pl111/pl111_display.c

@@ -21,7 +21,6 @@
 #include <linux/of_graph.h>
 
 #include <drm/drmP.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_fb_cma_helper.h>
@@ -94,7 +93,7 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
 	struct pl111_drm_dev_private *priv = drm->dev_private;
 	const struct drm_display_mode *mode = &cstate->mode;
 	struct drm_framebuffer *fb = plane->state->fb;
-	struct drm_connector *connector = &priv->connector.connector;
+	struct drm_connector *connector = priv->connector;
 	u32 cntl;
 	u32 ppl, hsw, hfp, hbp;
 	u32 lpp, vsw, vfp, vbp;
@@ -156,10 +155,8 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
 
 	writel(0, priv->regs + CLCD_TIM3);
 
-	drm_panel_prepare(priv->connector.panel);
-
-	/* Enable and Power Up */
-	cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1);
+	/* Hard-code TFT panel */
+	cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDVCOMP(1);
 
 	/* Note that the the hardware's format reader takes 'r' from
 	 * the low bit, while DRM formats list channels from high bit
@@ -202,9 +199,21 @@ static void pl111_display_enable(struct drm_simple_display_pipe *pipe,
 		break;
 	}
 
-	writel(cntl, priv->regs + CLCD_PL111_CNTL);
+	/* Power sequence: first enable and chill */
+	writel(cntl, priv->regs + priv->ctrl);
+
+	/*
+	 * We expect this delay to stabilize the contrast
+	 * voltage Vee as stipulated by the manual
+	 */
+	msleep(20);
+
+	if (priv->variant_display_enable)
+		priv->variant_display_enable(drm, fb->format->format);
 
-	drm_panel_enable(priv->connector.panel);
+	/* Power Up */
+	cntl |= CNTL_LCDPWR;
+	writel(cntl, priv->regs + priv->ctrl);
 
 	drm_crtc_vblank_on(crtc);
 }
@@ -214,15 +223,28 @@ void pl111_display_disable(struct drm_simple_display_pipe *pipe)
 	struct drm_crtc *crtc = &pipe->crtc;
 	struct drm_device *drm = crtc->dev;
 	struct pl111_drm_dev_private *priv = drm->dev_private;
+	u32 cntl;
 
 	drm_crtc_vblank_off(crtc);
 
-	drm_panel_disable(priv->connector.panel);
+	/* Power Down */
+	cntl = readl(priv->regs + priv->ctrl);
+	if (cntl & CNTL_LCDPWR) {
+		cntl &= ~CNTL_LCDPWR;
+		writel(cntl, priv->regs + priv->ctrl);
+	}
+
+	/*
+	 * We expect this delay to stabilize the contrast voltage Vee as
+	 * stipulated by the manual
+	 */
+	msleep(20);
 
-	/* Disable and Power Down */
-	writel(0, priv->regs + CLCD_PL111_CNTL);
+	if (priv->variant_display_disable)
+		priv->variant_display_disable(drm);
 
-	drm_panel_unprepare(priv->connector.panel);
+	/* Disable */
+	writel(0, priv->regs + priv->ctrl);
 
 	clk_disable_unprepare(priv->clk);
 }
@@ -260,7 +282,7 @@ int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc)
 {
 	struct pl111_drm_dev_private *priv = drm->dev_private;
 
-	writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB);
+	writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + priv->ienb);
 
 	return 0;
 }
@@ -269,7 +291,7 @@ void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc)
 {
 	struct pl111_drm_dev_private *priv = drm->dev_private;
 
-	writel(0, priv->regs + CLCD_PL111_IENB);
+	writel(0, priv->regs + priv->ienb);
 }
 
 static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe,
@@ -413,22 +435,6 @@ int pl111_display_init(struct drm_device *drm)
 	struct device_node *endpoint;
 	u32 tft_r0b0g0[3];
 	int ret;
-	static const u32 formats[] = {
-		DRM_FORMAT_ABGR8888,
-		DRM_FORMAT_XBGR8888,
-		DRM_FORMAT_ARGB8888,
-		DRM_FORMAT_XRGB8888,
-		DRM_FORMAT_BGR565,
-		DRM_FORMAT_RGB565,
-		DRM_FORMAT_ABGR1555,
-		DRM_FORMAT_XBGR1555,
-		DRM_FORMAT_ARGB1555,
-		DRM_FORMAT_XRGB1555,
-		DRM_FORMAT_ABGR4444,
-		DRM_FORMAT_XBGR4444,
-		DRM_FORMAT_ARGB4444,
-		DRM_FORMAT_XRGB4444,
-	};
 
 	endpoint = of_graph_get_next_endpoint(dev->of_node, NULL);
 	if (!endpoint)
@@ -444,21 +450,16 @@ int pl111_display_init(struct drm_device *drm)
 	}
 	of_node_put(endpoint);
 
-	if (tft_r0b0g0[0] != 0 ||
-	    tft_r0b0g0[1] != 8 ||
-	    tft_r0b0g0[2] != 16) {
-		dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n");
-		return -EINVAL;
-	}
-
 	ret = pl111_init_clock_divider(drm);
 	if (ret)
 		return ret;
 
 	ret = drm_simple_display_pipe_init(drm, &priv->pipe,
 					   &pl111_display_funcs,
-					   formats, ARRAY_SIZE(formats),
-					   NULL, &priv->connector.connector);
+					   priv->variant->formats,
+					   priv->variant->nformats,
+					   NULL,
+					   priv->connector);
 	if (ret)
 		return ret;
 

drivers/gpu/drm/pl111/pl111_drm.h

@@ -21,25 +21,43 @@
 
 #include <drm/drm_gem.h>
 #include <drm/drm_simple_kms_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_bridge.h>
 #include <linux/clk-provider.h>
+#include <linux/interrupt.h>
 
 #define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
 
 struct drm_minor;
 
-struct pl111_drm_connector {
-	struct drm_connector connector;
-	struct drm_panel *panel;
+/**
+ * struct pl111_variant_data - encodes IP differences
+ * @name: the name of this variant
+ * @is_pl110: this is the early PL110 variant
+ * @formats: array of supported pixel formats on this variant
+ * @nformats: the length of the array of supported pixel formats
+ */
+struct pl111_variant_data {
+	const char *name;
+	bool is_pl110;
+	const u32 *formats;
+	unsigned int nformats;
 };
 
 struct pl111_drm_dev_private {
 	struct drm_device *drm;
 
-	struct pl111_drm_connector connector;
+	struct drm_connector *connector;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	struct drm_simple_display_pipe pipe;
 	struct drm_fbdev_cma *fbdev;
 
 	void *regs;
+	u32 ienb;
+	u32 ctrl;
 	/* The pixel clock (a reference to our clock divider off of CLCDCLK). */
 	struct clk *clk;
 	/* pl111's internal clock divider. */
@@ -48,20 +66,15 @@ struct pl111_drm_dev_private {
 	 * subsystem and pl111_display_enable().
 	 */
 	spinlock_t tim2_lock;
+	const struct pl111_variant_data *variant;
+	void (*variant_display_enable) (struct drm_device *drm, u32 format);
+	void (*variant_display_disable) (struct drm_device *drm);
 };
 
-#define to_pl111_connector(x) \
-	container_of(x, struct pl111_drm_connector, connector)
-
 int pl111_display_init(struct drm_device *dev);
 int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc);
 void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc);
 irqreturn_t pl111_irq(int irq, void *data);
-int pl111_connector_init(struct drm_device *dev);
-int pl111_encoder_init(struct drm_device *dev);
-int pl111_dumb_create(struct drm_file *file_priv,
-		      struct drm_device *dev,
-		      struct drm_mode_create_dumb *args);
 int pl111_debugfs_init(struct drm_minor *minor);
 
 #endif /* _PL111_DRM_H_ */

drivers/gpu/drm/pl111/pl111_drv.c

@@ -41,9 +41,6 @@
  * - Fix race between setting plane base address and getting IRQ for
  *   vsync firing the pageflip completion.
  *
- * - Expose the correct set of formats we can support based on the
- *   "arm,pl11x,tft-r0g0b0-pads" DT property.
- *
  * - Use the "max-memory-bandwidth" DT property to filter the
  *   supported formats.
  *
@@ -68,8 +65,12 @@
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
 
 #include "pl111_drm.h"
+#include "pl111_versatile.h"
 
 #define DRIVER_DESC      "DRM module for PL111"
 
@@ -83,6 +84,8 @@ static int pl111_modeset_init(struct drm_device *dev)
 {
 	struct drm_mode_config *mode_config;
 	struct pl111_drm_dev_private *priv = dev->dev_private;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	int ret = 0;
 
 	drm_mode_config_init(dev);
@@ -93,34 +96,43 @@ static int pl111_modeset_init(struct drm_device *dev)
 	mode_config->min_height = 1;
 	mode_config->max_height = 768;
 
-	ret = pl111_connector_init(dev);
-	if (ret) {
-		dev_err(dev->dev, "Failed to create pl111_drm_connector\n");
-		goto out_config;
-	}
-
-	/* Don't actually attach if we didn't find a drm_panel
-	 * attached to us.  This will allow a kernel to include both
-	 * the fbdev pl111 driver and this one, and choose between
-	 * them based on which subsystem has support for the panel.
-	 */
-	if (!priv->connector.panel) {
-		dev_info(dev->dev,
-			 "Disabling due to lack of DRM panel device.\n");
-		ret = -ENODEV;
-		goto out_config;
+	ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
+					  0, 0, &panel, &bridge);
+	if (ret && ret != -ENODEV)
+		return ret;
+	if (panel) {
+		bridge = drm_panel_bridge_add(panel,
+					      DRM_MODE_CONNECTOR_Unknown);
+		if (IS_ERR(bridge)) {
+			ret = PTR_ERR(bridge);
+			goto out_config;
+		}
+		/*
+		 * TODO: when we are using a different bridge than a panel
+		 * (such as a dumb VGA connector) we need to devise a different
+		 * method to get the connector out of the bridge.
+		 */
 	}
 
 	ret = pl111_display_init(dev);
 	if (ret != 0) {
 		dev_err(dev->dev, "Failed to init display\n");
-		goto out_config;
+		goto out_bridge;
 	}
 
+	ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
+						    bridge);
+	if (ret)
+		return ret;
+
+	priv->bridge = bridge;
+	priv->panel = panel;
+	priv->connector = panel->connector;
+
 	ret = drm_vblank_init(dev, 1);
 	if (ret != 0) {
 		dev_err(dev->dev, "Failed to init vblank\n");
-		goto out_config;
+		goto out_bridge;
 	}
 
 	drm_mode_config_reset(dev);
@@ -132,6 +144,9 @@ static int pl111_modeset_init(struct drm_device *dev)
 
 	goto finish;
 
+out_bridge:
+	if (panel)
+		drm_panel_bridge_remove(bridge);
 out_config:
 	drm_mode_config_cleanup(dev);
 finish:
@@ -183,6 +198,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 {
 	struct device *dev = &amba_dev->dev;
 	struct pl111_drm_dev_private *priv;
+	struct pl111_variant_data *variant = id->data;
 	struct drm_device *drm;
 	int ret;
 
@@ -196,6 +212,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 	amba_set_drvdata(amba_dev, drm);
 	priv->drm = drm;
 	drm->dev_private = priv;
+	priv->variant = variant;
+
+	/*
+	 * The PL110 and PL111 variants have two registers
+	 * swapped: interrupt enable and control. For this reason
+	 * we use offsets that we can change per variant.
+	 */
+	if (variant->is_pl110) {
+		/*
+		 * The ARM Versatile boards are even more special:
+		 * their PrimeCell ID say they are PL110 but the
+		 * control and interrupt enable registers are anyway
+		 * swapped to the PL111 order so they are not following
+		 * the PL110 datasheet.
+		 */
+		if (of_machine_is_compatible("arm,versatile-ab") ||
+		    of_machine_is_compatible("arm,versatile-pb")) {
+			priv->ienb = CLCD_PL111_IENB;
+			priv->ctrl = CLCD_PL111_CNTL;
+		} else {
+			priv->ienb = CLCD_PL110_IENB;
+			priv->ctrl = CLCD_PL110_CNTL;
+		}
+	} else {
+		priv->ienb = CLCD_PL111_IENB;
+		priv->ctrl = CLCD_PL111_CNTL;
+	}
 
 	priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
 	if (IS_ERR(priv->regs)) {
@@ -204,15 +247,19 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 	}
 
 	/* turn off interrupts before requesting the irq */
-	writel(0, priv->regs + CLCD_PL111_IENB);
+	writel(0, priv->regs + priv->ienb);
 
 	ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
-			       "pl111", priv);
+			       variant->name, priv);
 	if (ret != 0) {
 		dev_err(dev, "%s failed irq %d\n", __func__, ret);
 		return ret;
 	}
 
+	ret = pl111_versatile_init(dev, priv);
+	if (ret)
+		goto dev_unref;
+
 	ret = pl111_modeset_init(drm);
 	if (ret != 0)
 		goto dev_unref;
@@ -236,16 +283,70 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
 	drm_dev_unregister(drm);
 	if (priv->fbdev)
 		drm_fbdev_cma_fini(priv->fbdev);
+	if (priv->panel)
+		drm_panel_bridge_remove(priv->bridge);
 	drm_mode_config_cleanup(drm);
 	drm_dev_unref(drm);
 
 	return 0;
 }
 
-static struct amba_id pl111_id_table[] = {
+/*
+ * This variant exist in early versions like the ARM Integrator
+ * and this version lacks the 565 and 444 pixel formats.
+ */
+static const u32 pl110_pixel_formats[] = {
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ABGR1555,
+	DRM_FORMAT_XBGR1555,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+};
+
+static const struct pl111_variant_data pl110_variant = {
+	.name = "PL110",
+	.is_pl110 = true,
+	.formats = pl110_pixel_formats,
+	.nformats = ARRAY_SIZE(pl110_pixel_formats),
+};
+
+/* RealView, Versatile Express etc use this modern variant */
+static const u32 pl111_pixel_formats[] = {
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR1555,
+	DRM_FORMAT_XBGR1555,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_ABGR4444,
+	DRM_FORMAT_XBGR4444,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+};
+
+static const struct pl111_variant_data pl111_variant = {
+	.name = "PL111",
+	.formats = pl111_pixel_formats,
+	.nformats = ARRAY_SIZE(pl111_pixel_formats),
+};
+
+static const struct amba_id pl111_id_table[] = {
+	{
+		.id = 0x00041110,
+		.mask = 0x000fffff,
+		.data = (void*)&pl110_variant,
+	},
 	{
 		.id = 0x00041111,
 		.mask = 0x000fffff,
+		.data = (void*)&pl111_variant,
 	},
 	{0, 0},
 };

drivers/gpu/drm/pl111/pl111_versatile.c

@@ -0,0 +1,270 @@
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <drm/drmP.h>
+#include "pl111_versatile.h"
+#include "pl111_drm.h"
+
+static struct regmap *versatile_syscon_map;
+
+/*
+ * We detect the different syscon types from the compatible strings.
+ */
+enum versatile_clcd {
+	INTEGRATOR_CLCD_CM,
+	VERSATILE_CLCD,
+	REALVIEW_CLCD_EB,
+	REALVIEW_CLCD_PB1176,
+	REALVIEW_CLCD_PB11MP,
+	REALVIEW_CLCD_PBA8,
+	REALVIEW_CLCD_PBX,
+};
+
+static const struct of_device_id versatile_clcd_of_match[] = {
+	{
+		.compatible = "arm,core-module-integrator",
+		.data = (void *)INTEGRATOR_CLCD_CM,
+	},
+	{
+		.compatible = "arm,versatile-sysreg",
+		.data = (void *)VERSATILE_CLCD,
+	},
+	{
+		.compatible = "arm,realview-eb-syscon",
+		.data = (void *)REALVIEW_CLCD_EB,
+	},
+	{
+		.compatible = "arm,realview-pb1176-syscon",
+		.data = (void *)REALVIEW_CLCD_PB1176,
+	},
+	{
+		.compatible = "arm,realview-pb11mp-syscon",
+		.data = (void *)REALVIEW_CLCD_PB11MP,
+	},
+	{
+		.compatible = "arm,realview-pba8-syscon",
+		.data = (void *)REALVIEW_CLCD_PBA8,
+	},
+	{
+		.compatible = "arm,realview-pbx-syscon",
+		.data = (void *)REALVIEW_CLCD_PBX,
+	},
+	{},
+};
+
+/*
+ * Core module CLCD control on the Integrator/CP, bits
+ * 8 thru 19 of the CM_CONTROL register controls a bunch
+ * of CLCD settings.
+ */
+#define INTEGRATOR_HDR_CTRL_OFFSET	0x0C
+#define INTEGRATOR_CLCD_LCDBIASEN	BIT(8)
+#define INTEGRATOR_CLCD_LCDBIASUP	BIT(9)
+#define INTEGRATOR_CLCD_LCDBIASDN	BIT(10)
+/* Bits 11,12,13 controls the LCD type */
+#define INTEGRATOR_CLCD_LCDMUX_MASK	(BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCDMUX_LCD24	BIT(11)
+#define INTEGRATOR_CLCD_LCDMUX_VGA565	BIT(12)
+#define INTEGRATOR_CLCD_LCDMUX_SHARP	(BIT(11)|BIT(12))
+#define INTEGRATOR_CLCD_LCDMUX_VGA555	BIT(13)
+#define INTEGRATOR_CLCD_LCDMUX_VGA24	(BIT(11)|BIT(12)|BIT(13))
+#define INTEGRATOR_CLCD_LCD0_EN		BIT(14)
+#define INTEGRATOR_CLCD_LCD1_EN		BIT(15)
+/* R/L flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC1	BIT(16)
+/* U/D flip on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC2	BIT(17)
+/* No connection on Sharp */
+#define INTEGRATOR_CLCD_LCD_STATIC	BIT(18)
+/* 0 = 24bit VGA, 1 = 18bit VGA */
+#define INTEGRATOR_CLCD_LCD_N24BITEN	BIT(19)
+
+#define INTEGRATOR_CLCD_MASK		(INTEGRATOR_CLCD_LCDBIASEN | \
+					 INTEGRATOR_CLCD_LCDBIASUP | \
+					 INTEGRATOR_CLCD_LCDBIASDN | \
+					 INTEGRATOR_CLCD_LCDMUX_MASK | \
+					 INTEGRATOR_CLCD_LCD0_EN | \
+					 INTEGRATOR_CLCD_LCD1_EN | \
+					 INTEGRATOR_CLCD_LCD_STATIC1 | \
+					 INTEGRATOR_CLCD_LCD_STATIC2 | \
+					 INTEGRATOR_CLCD_LCD_STATIC | \
+					 INTEGRATOR_CLCD_LCD_N24BITEN)
+
+static void pl111_integrator_enable(struct drm_device *drm, u32 format)
+{
+	u32 val;
+
+	dev_info(drm->dev, "enable Integrator CLCD connectors\n");
+
+	/* FIXME: really needed? */
+	val = INTEGRATOR_CLCD_LCD_STATIC1 | INTEGRATOR_CLCD_LCD_STATIC2 |
+		INTEGRATOR_CLCD_LCD0_EN | INTEGRATOR_CLCD_LCD1_EN;
+
+	switch (format) {
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_XRGB8888:
+		break;
+	case DRM_FORMAT_BGR565:
+	case DRM_FORMAT_RGB565:
+		/* truecolor RGB565 */
+		val |= INTEGRATOR_CLCD_LCDMUX_VGA565;
+		break;
+	case DRM_FORMAT_XBGR1555:
+	case DRM_FORMAT_XRGB1555:
+		/* Pseudocolor, RGB555, BGR555 */
+		val |= INTEGRATOR_CLCD_LCDMUX_VGA555;
+		break;
+	default:
+		dev_err(drm->dev, "unhandled format on Integrator 0x%08x\n",
+			format);
+		break;
+	}
+
+	regmap_update_bits(versatile_syscon_map,
+			   INTEGRATOR_HDR_CTRL_OFFSET,
+			   INTEGRATOR_CLCD_MASK,
+			   val);
+}
+
+/*
+ * This configuration register in the Versatile and RealView
+ * family is uniformly present but appears more and more
+ * unutilized starting with the RealView series.
+ */
+#define SYS_CLCD			0x50
+#define SYS_CLCD_MODE_MASK		(BIT(0)|BIT(1))
+#define SYS_CLCD_MODE_888		0
+#define SYS_CLCD_MODE_5551		BIT(0)
+#define SYS_CLCD_MODE_565_R_LSB		BIT(1)
+#define SYS_CLCD_MODE_565_B_LSB		(BIT(0)|BIT(1))
+#define SYS_CLCD_CONNECTOR_MASK		(BIT(2)|BIT(3)|BIT(4)|BIT(5))
+#define SYS_CLCD_NLCDIOON		BIT(2)
+#define SYS_CLCD_VDDPOSSWITCH		BIT(3)
+#define SYS_CLCD_PWR3V5SWITCH		BIT(4)
+#define SYS_CLCD_VDDNEGSWITCH		BIT(5)
+
+static void pl111_versatile_disable(struct drm_device *drm)
+{
+	dev_info(drm->dev, "disable Versatile CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   0);
+}
+
+static void pl111_versatile_enable(struct drm_device *drm, u32 format)
+{
+	u32 val = 0;
+
+	dev_info(drm->dev, "enable Versatile CLCD connectors\n");
+
+	switch (format) {
+	case DRM_FORMAT_ABGR8888:
+	case DRM_FORMAT_XBGR8888:
+	case DRM_FORMAT_ARGB8888:
+	case DRM_FORMAT_XRGB8888:
+		val |= SYS_CLCD_MODE_888;
+		break;
+	case DRM_FORMAT_BGR565:
+		val |= SYS_CLCD_MODE_565_R_LSB;
+		break;
+	case DRM_FORMAT_RGB565:
+		val |= SYS_CLCD_MODE_565_B_LSB;
+		break;
+	case DRM_FORMAT_ABGR1555:
+	case DRM_FORMAT_XBGR1555:
+	case DRM_FORMAT_ARGB1555:
+	case DRM_FORMAT_XRGB1555:
+		val |= SYS_CLCD_MODE_5551;
+		break;
+	default:
+		dev_err(drm->dev, "unhandled format on Versatile 0x%08x\n",
+			format);
+		break;
+	}
+
+	/* Set up the MUX */
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_MODE_MASK,
+			   val);
+
+	/* Then enable the display */
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+static void pl111_realview_clcd_disable(struct drm_device *drm)
+{
+	dev_info(drm->dev, "disable RealView CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   0);
+}
+
+static void pl111_realview_clcd_enable(struct drm_device *drm, u32 format)
+{
+	dev_info(drm->dev, "enable RealView CLCD connectors\n");
+	regmap_update_bits(versatile_syscon_map,
+			   SYS_CLCD,
+			   SYS_CLCD_CONNECTOR_MASK,
+			   SYS_CLCD_NLCDIOON | SYS_CLCD_PWR3V5SWITCH);
+}
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
+{
+	const struct of_device_id *clcd_id;
+	enum versatile_clcd versatile_clcd_type;
+	struct device_node *np;
+	struct regmap *map;
+
+	np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
+					     &clcd_id);
+	if (!np) {
+		/* Non-ARM reference designs, just bail out */
+		return 0;
+	}
+	versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
+
+	map = syscon_node_to_regmap(np);
+	if (IS_ERR(map)) {
+		dev_err(dev, "no Versatile syscon regmap\n");
+		return PTR_ERR(map);
+	}
+
+	switch (versatile_clcd_type) {
+	case INTEGRATOR_CLCD_CM:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_integrator_enable;
+		dev_info(dev, "set up callbacks for Integrator PL110\n");
+		break;
+	case VERSATILE_CLCD:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_versatile_enable;
+		priv->variant_display_disable = pl111_versatile_disable;
+		dev_info(dev, "set up callbacks for Versatile PL110+\n");
+		break;
+	case REALVIEW_CLCD_EB:
+	case REALVIEW_CLCD_PB1176:
+	case REALVIEW_CLCD_PB11MP:
+	case REALVIEW_CLCD_PBA8:
+	case REALVIEW_CLCD_PBX:
+		versatile_syscon_map = map;
+		priv->variant_display_enable = pl111_realview_clcd_enable;
+		priv->variant_display_disable = pl111_realview_clcd_disable;
+		dev_info(dev, "set up callbacks for RealView PL111\n");
+		break;
+	default:
+		dev_info(dev, "unknown Versatile system controller\n");
+		break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pl111_versatile_init);

drivers/gpu/drm/pl111/pl111_versatile.h

@@ -0,0 +1,9 @@
+#include <linux/device.h>
+#include "pl111_drm.h"
+
+#ifndef PL111_VERSATILE_H
+#define PL111_VERSATILE_H
+
+int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv);
+
+#endif

drivers/gpu/drm/rockchip/Kconfig

@@ -57,4 +57,12 @@ config ROCKCHIP_INNO_HDMI
 	  for the Innosilicon HDMI driver. If you want to enable
 	  HDMI on RK3036 based SoC, you should select this option.
 
+config ROCKCHIP_LVDS
+	bool "Rockchip LVDS support"
+	depends on DRM_ROCKCHIP
+	help
+	  Choose this option to enable support for Rockchip LVDS controllers.
+	  Rockchip rk3288 SoC has LVDS TX Controller can be used, and it
+	  support LVDS, rgb, dual LVDS output mode. say Y to enable its
+	  driver.
 endif

drivers/gpu/drm/rockchip/Makefile

@@ -12,5 +12,6 @@ rockchipdrm-$(CONFIG_ROCKCHIP_CDN_DP) += cdn-dp-core.o cdn-dp-reg.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
 rockchipdrm-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
 rockchipdrm-$(CONFIG_ROCKCHIP_INNO_HDMI) += inno_hdmi.o
+rockchipdrm-$(CONFIG_ROCKCHIP_LVDS) += rockchip_lvds.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o

drivers/gpu/drm/rockchip/analogix_dp-rockchip.c

@@ -88,7 +88,7 @@ static void analogix_dp_psr_set(struct drm_encoder *encoder, bool enabled)
 	if (!analogix_dp_psr_supported(dp->dev))
 		return;
 
-	dev_dbg(dp->dev, "%s PSR...\n", enabled ? "Entry" : "Exit");
+	DRM_DEV_DEBUG(dp->dev, "%s PSR...\n", enabled ? "Entry" : "Exit");
 
 	spin_lock_irqsave(&dp->psr_lock, flags);
 	if (enabled)
@@ -110,7 +110,7 @@ static void analogix_dp_psr_work(struct work_struct *work)
 	ret = rockchip_drm_wait_vact_end(dp->encoder.crtc,
 					 PSR_WAIT_LINE_FLAG_TIMEOUT_MS);
 	if (ret) {
-		dev_err(dp->dev, "line flag interrupt did not arrive\n");
+		DRM_DEV_ERROR(dp->dev, "line flag interrupt did not arrive\n");
 		return;
 	}
 
@@ -140,13 +140,13 @@ static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
 
 	ret = clk_prepare_enable(dp->pclk);
 	if (ret < 0) {
-		dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "failed to enable pclk %d\n", ret);
 		return ret;
 	}
 
 	ret = rockchip_dp_pre_init(dp);
 	if (ret < 0) {
-		dev_err(dp->dev, "failed to dp pre init %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "failed to dp pre init %d\n", ret);
 		clk_disable_unprepare(dp->pclk);
 		return ret;
 	}
@@ -211,17 +211,17 @@ static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
 	else
 		val = dp->data->lcdsel_big;
 
-	dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
+	DRM_DEV_DEBUG(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
 
 	ret = clk_prepare_enable(dp->grfclk);
 	if (ret < 0) {
-		dev_err(dp->dev, "failed to enable grfclk %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "failed to enable grfclk %d\n", ret);
 		return;
 	}
 
 	ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
 	if (ret != 0)
-		dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "Could not write to GRF: %d\n", ret);
 
 	clk_disable_unprepare(dp->grfclk);
 }
@@ -277,7 +277,7 @@ static int rockchip_dp_init(struct rockchip_dp_device *dp)
 
 	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
 	if (IS_ERR(dp->grf)) {
-		dev_err(dev, "failed to get rockchip,grf property\n");
+		DRM_DEV_ERROR(dev, "failed to get rockchip,grf property\n");
 		return PTR_ERR(dp->grf);
 	}
 
@@ -287,31 +287,31 @@ static int rockchip_dp_init(struct rockchip_dp_device *dp)
 	} else if (PTR_ERR(dp->grfclk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
 	} else if (IS_ERR(dp->grfclk)) {
-		dev_err(dev, "failed to get grf clock\n");
+		DRM_DEV_ERROR(dev, "failed to get grf clock\n");
 		return PTR_ERR(dp->grfclk);
 	}
 
 	dp->pclk = devm_clk_get(dev, "pclk");
 	if (IS_ERR(dp->pclk)) {
-		dev_err(dev, "failed to get pclk property\n");
+		DRM_DEV_ERROR(dev, "failed to get pclk property\n");
 		return PTR_ERR(dp->pclk);
 	}
 
 	dp->rst = devm_reset_control_get(dev, "dp");
 	if (IS_ERR(dp->rst)) {
-		dev_err(dev, "failed to get dp reset control\n");
+		DRM_DEV_ERROR(dev, "failed to get dp reset control\n");
 		return PTR_ERR(dp->rst);
 	}
 
 	ret = clk_prepare_enable(dp->pclk);
 	if (ret < 0) {
-		dev_err(dp->dev, "failed to enable pclk %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "failed to enable pclk %d\n", ret);
 		return ret;
 	}
 
 	ret = rockchip_dp_pre_init(dp);
 	if (ret < 0) {
-		dev_err(dp->dev, "failed to pre init %d\n", ret);
+		DRM_DEV_ERROR(dp->dev, "failed to pre init %d\n", ret);
 		clk_disable_unprepare(dp->pclk);
 		return ret;
 	}

drivers/gpu/drm/rockchip/cdn-dp-reg.c

@@ -323,7 +323,7 @@ int cdn_dp_load_firmware(struct cdn_dp_device *dp, const u32 *i_mem,
 	reg = readl(dp->regs + VER_LIB_H_ADDR) & 0xff;
 	dp->fw_version |= reg << 24;
 
-	dev_dbg(dp->dev, "firmware version: %x\n", dp->fw_version);
+	DRM_DEV_DEBUG(dp->dev, "firmware version: %x\n", dp->fw_version);
 
 	return 0;
 }

drivers/gpu/drm/rockchip/dw-mipi-dsi.c

@@ -430,9 +430,9 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 
 	testdin = max_mbps_to_testdin(dsi->lane_mbps);
 	if (testdin < 0) {
-		dev_err(dsi->dev,
-			"failed to get testdin for %dmbps lane clock\n",
-			dsi->lane_mbps);
+		DRM_DEV_ERROR(dsi->dev,
+			      "failed to get testdin for %dmbps lane clock\n",
+			      dsi->lane_mbps);
 		return testdin;
 	}
 
@@ -443,7 +443,7 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 
 	ret = clk_prepare_enable(dsi->phy_cfg_clk);
 	if (ret) {
-		dev_err(dsi->dev, "Failed to enable phy_cfg_clk\n");
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable phy_cfg_clk\n");
 		return ret;
 	}
 
@@ -501,7 +501,7 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 	ret = readl_poll_timeout(dsi->base + DSI_PHY_STATUS,
 				 val, val & LOCK, 1000, PHY_STATUS_TIMEOUT_US);
 	if (ret < 0) {
-		dev_err(dsi->dev, "failed to wait for phy lock state\n");
+		DRM_DEV_ERROR(dsi->dev, "failed to wait for phy lock state\n");
 		goto phy_init_end;
 	}
 
@@ -509,8 +509,8 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 				 val, val & STOP_STATE_CLK_LANE, 1000,
 				 PHY_STATUS_TIMEOUT_US);
 	if (ret < 0)
-		dev_err(dsi->dev,
-			"failed to wait for phy clk lane stop state\n");
+		DRM_DEV_ERROR(dsi->dev,
+			      "failed to wait for phy clk lane stop state\n");
 
 phy_init_end:
 	clk_disable_unprepare(dsi->phy_cfg_clk);
@@ -529,8 +529,9 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
 
 	bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
 	if (bpp < 0) {
-		dev_err(dsi->dev, "failed to get bpp for pixel format %d\n",
-			dsi->format);
+		DRM_DEV_ERROR(dsi->dev,
+			      "failed to get bpp for pixel format %d\n",
+			      dsi->format);
 		return bpp;
 	}
 
@@ -541,7 +542,8 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
 		if (tmp < max_mbps)
 			target_mbps = tmp;
 		else
-			dev_err(dsi->dev, "DPHY clock frequency is out of range\n");
+			DRM_DEV_ERROR(dsi->dev,
+				      "DPHY clock frequency is out of range\n");
 	}
 
 	pllref = DIV_ROUND_UP(clk_get_rate(dsi->pllref_clk), USEC_PER_SEC);
@@ -582,8 +584,9 @@ static int dw_mipi_dsi_host_attach(struct mipi_dsi_host *host,
 	struct dw_mipi_dsi *dsi = host_to_dsi(host);
 
 	if (device->lanes > dsi->pdata->max_data_lanes) {
-		dev_err(dsi->dev, "the number of data lanes(%u) is too many\n",
-			device->lanes);
+		DRM_DEV_ERROR(dsi->dev,
+			      "the number of data lanes(%u) is too many\n",
+			      device->lanes);
 		return -EINVAL;
 	}
 
@@ -632,7 +635,8 @@ static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
 				 val, !(val & GEN_CMD_FULL), 1000,
 				 CMD_PKT_STATUS_TIMEOUT_US);
 	if (ret < 0) {
-		dev_err(dsi->dev, "failed to get available command FIFO\n");
+		DRM_DEV_ERROR(dsi->dev,
+			      "failed to get available command FIFO\n");
 		return ret;
 	}
 
@@ -643,7 +647,7 @@ static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
 				 val, (val & mask) == mask,
 				 1000, CMD_PKT_STATUS_TIMEOUT_US);
 	if (ret < 0) {
-		dev_err(dsi->dev, "failed to write command FIFO\n");
+		DRM_DEV_ERROR(dsi->dev, "failed to write command FIFO\n");
 		return ret;
 	}
 
@@ -663,8 +667,9 @@ static int dw_mipi_dsi_dcs_short_write(struct dw_mipi_dsi *dsi,
 		data |= tx_buf[1] << 8;
 
 	if (msg->tx_len > 2) {
-		dev_err(dsi->dev, "too long tx buf length %zu for short write\n",
-			msg->tx_len);
+		DRM_DEV_ERROR(dsi->dev,
+			      "too long tx buf length %zu for short write\n",
+			      msg->tx_len);
 		return -EINVAL;
 	}
 
@@ -682,8 +687,9 @@ static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
 	u32 val;
 
 	if (msg->tx_len < 3) {
-		dev_err(dsi->dev, "wrong tx buf length %zu for long write\n",
-			msg->tx_len);
+		DRM_DEV_ERROR(dsi->dev,
+			      "wrong tx buf length %zu for long write\n",
+			      msg->tx_len);
 		return -EINVAL;
 	}
 
@@ -704,8 +710,8 @@ static int dw_mipi_dsi_dcs_long_write(struct dw_mipi_dsi *dsi,
 					 val, !(val & GEN_PLD_W_FULL), 1000,
 					 CMD_PKT_STATUS_TIMEOUT_US);
 		if (ret < 0) {
-			dev_err(dsi->dev,
-				"failed to get available write payload FIFO\n");
+			DRM_DEV_ERROR(dsi->dev,
+				      "failed to get available write payload FIFO\n");
 			return ret;
 		}
 	}
@@ -731,8 +737,8 @@ static ssize_t dw_mipi_dsi_host_transfer(struct mipi_dsi_host *host,
 		ret = dw_mipi_dsi_dcs_long_write(dsi, msg);
 		break;
 	default:
-		dev_err(dsi->dev, "unsupported message type 0x%02x\n",
-			msg->type);
+		DRM_DEV_ERROR(dsi->dev, "unsupported message type 0x%02x\n",
+			      msg->type);
 		ret = -EINVAL;
 	}
 
@@ -935,7 +941,7 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
 		return;
 
 	if (clk_prepare_enable(dsi->pclk)) {
-		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
 		return;
 	}
 
@@ -967,7 +973,7 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 		return;
 
 	if (clk_prepare_enable(dsi->pclk)) {
-		dev_err(dsi->dev, "%s: Failed to enable pclk\n", __func__);
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable pclk\n");
 		return;
 	}
 
@@ -991,7 +997,7 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 	 */
 	ret = clk_prepare_enable(dsi->grf_clk);
 	if (ret) {
-		dev_err(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
+		DRM_DEV_ERROR(dsi->dev, "Failed to enable grf_clk: %d\n", ret);
 		return;
 	}
 
@@ -1004,7 +1010,7 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 
 	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_CMD_MODE);
 	if (drm_panel_prepare(dsi->panel))
-		dev_err(dsi->dev, "failed to prepare panel\n");
+		DRM_DEV_ERROR(dsi->dev, "failed to prepare panel\n");
 
 	dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
 	drm_panel_enable(dsi->panel);
@@ -1017,7 +1023,8 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
 		val = pdata->dsi0_en_bit << 16;
 
 	regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val);
-	dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
+	DRM_DEV_DEBUG(dsi->dev,
+		      "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG");
 	dsi->dpms_mode = DRM_MODE_DPMS_ON;
 
 	clk_disable_unprepare(dsi->grf_clk);
@@ -1111,7 +1118,7 @@ static int dw_mipi_dsi_register(struct drm_device *drm,
 	ret = drm_encoder_init(drm, &dsi->encoder, &dw_mipi_dsi_encoder_funcs,
 			       DRM_MODE_ENCODER_DSI, NULL);
 	if (ret) {
-		dev_err(dev, "Failed to initialize encoder with drm\n");
+		DRM_DEV_ERROR(dev, "Failed to initialize encoder with drm\n");
 		return ret;
 	}
 
@@ -1133,7 +1140,7 @@ static int rockchip_mipi_parse_dt(struct dw_mipi_dsi *dsi)
 
 	dsi->grf_regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
 	if (IS_ERR(dsi->grf_regmap)) {
-		dev_err(dsi->dev, "Unable to get rockchip,grf\n");
+		DRM_DEV_ERROR(dsi->dev, "Unable to get rockchip,grf\n");
 		return PTR_ERR(dsi->grf_regmap);
 	}
 
@@ -1205,14 +1212,15 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 	dsi->pllref_clk = devm_clk_get(dev, "ref");
 	if (IS_ERR(dsi->pllref_clk)) {
 		ret = PTR_ERR(dsi->pllref_clk);
-		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
+		DRM_DEV_ERROR(dev,
+			      "Unable to get pll reference clock: %d\n", ret);
 		return ret;
 	}
 
 	dsi->pclk = devm_clk_get(dev, "pclk");
 	if (IS_ERR(dsi->pclk)) {
 		ret = PTR_ERR(dsi->pclk);
-		dev_err(dev, "Unable to get pclk: %d\n", ret);
+		DRM_DEV_ERROR(dev, "Unable to get pclk: %d\n", ret);
 		return ret;
 	}
 
@@ -1226,7 +1234,8 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 		if (ret == -ENOENT) {
 			apb_rst = NULL;
 		} else {
-			dev_err(dev, "Unable to get reset control: %d\n", ret);
+			DRM_DEV_ERROR(dev,
+				      "Unable to get reset control: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1234,7 +1243,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 	if (apb_rst) {
 		ret = clk_prepare_enable(dsi->pclk);
 		if (ret) {
-			dev_err(dev, "%s: Failed to enable pclk\n", __func__);
+			DRM_DEV_ERROR(dev, "Failed to enable pclk\n");
 			return ret;
 		}
 
@@ -1249,7 +1258,8 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 		dsi->phy_cfg_clk = devm_clk_get(dev, "phy_cfg");
 		if (IS_ERR(dsi->phy_cfg_clk)) {
 			ret = PTR_ERR(dsi->phy_cfg_clk);
-			dev_err(dev, "Unable to get phy_cfg_clk: %d\n", ret);
+			DRM_DEV_ERROR(dev,
+				      "Unable to get phy_cfg_clk: %d\n", ret);
 			return ret;
 		}
 	}
@@ -1258,20 +1268,20 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 		dsi->grf_clk = devm_clk_get(dev, "grf");
 		if (IS_ERR(dsi->grf_clk)) {
 			ret = PTR_ERR(dsi->grf_clk);
-			dev_err(dev, "Unable to get grf_clk: %d\n", ret);
+			DRM_DEV_ERROR(dev, "Unable to get grf_clk: %d\n", ret);
 			return ret;
 		}
 	}
 
 	ret = clk_prepare_enable(dsi->pllref_clk);
 	if (ret) {
-		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
+		DRM_DEV_ERROR(dev, "Failed to enable pllref_clk\n");
 		return ret;
 	}
 
 	ret = dw_mipi_dsi_register(drm, dsi);
 	if (ret) {
-		dev_err(dev, "Failed to register mipi_dsi: %d\n", ret);
+		DRM_DEV_ERROR(dev, "Failed to register mipi_dsi: %d\n", ret);
 		goto err_pllref;
 	}
 
@@ -1281,7 +1291,7 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master,
 	dsi->dsi_host.dev = dev;
 	ret = mipi_dsi_host_register(&dsi->dsi_host);
 	if (ret) {
-		dev_err(dev, "Failed to register MIPI host: %d\n", ret);
+		DRM_DEV_ERROR(dev, "Failed to register MIPI host: %d\n", ret);
 		goto err_cleanup;
 	}
 

drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c

@@ -168,7 +168,7 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 
 	hdmi->regmap = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
 	if (IS_ERR(hdmi->regmap)) {
-		dev_err(hdmi->dev, "Unable to get rockchip,grf\n");
+		DRM_DEV_ERROR(hdmi->dev, "Unable to get rockchip,grf\n");
 		return PTR_ERR(hdmi->regmap);
 	}
 
@@ -178,7 +178,7 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	} else if (PTR_ERR(hdmi->vpll_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
 	} else if (IS_ERR(hdmi->vpll_clk)) {
-		dev_err(hdmi->dev, "failed to get grf clock\n");
+		DRM_DEV_ERROR(hdmi->dev, "failed to get grf clock\n");
 		return PTR_ERR(hdmi->vpll_clk);
 	}
 
@@ -188,13 +188,14 @@ static int rockchip_hdmi_parse_dt(struct rockchip_hdmi *hdmi)
 	} else if (PTR_ERR(hdmi->grf_clk) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
 	} else if (IS_ERR(hdmi->grf_clk)) {
-		dev_err(hdmi->dev, "failed to get grf clock\n");
+		DRM_DEV_ERROR(hdmi->dev, "failed to get grf clock\n");
 		return PTR_ERR(hdmi->grf_clk);
 	}
 
 	ret = clk_prepare_enable(hdmi->vpll_clk);
 	if (ret) {
-		dev_err(hdmi->dev, "Failed to enable HDMI vpll: %d\n", ret);
+		DRM_DEV_ERROR(hdmi->dev,
+			      "Failed to enable HDMI vpll: %d\n", ret);
 		return ret;
 	}
 
@@ -259,17 +260,17 @@ static void dw_hdmi_rockchip_encoder_enable(struct drm_encoder *encoder)
 
 	ret = clk_prepare_enable(hdmi->grf_clk);
 	if (ret < 0) {
-		dev_err(hdmi->dev, "failed to enable grfclk %d\n", ret);
+		DRM_DEV_ERROR(hdmi->dev, "failed to enable grfclk %d\n", ret);
 		return;
 	}
 
 	ret = regmap_write(hdmi->regmap, hdmi->chip_data->lcdsel_grf_reg, val);
 	if (ret != 0)
-		dev_err(hdmi->dev, "Could not write to GRF: %d\n", ret);
+		DRM_DEV_ERROR(hdmi->dev, "Could not write to GRF: %d\n", ret);
 
 	clk_disable_unprepare(hdmi->grf_clk);
-	dev_dbg(hdmi->dev, "vop %s output to hdmi\n",
-		ret ? "LIT" : "BIG");
+	DRM_DEV_DEBUG(hdmi->dev, "vop %s output to hdmi\n",
+		      ret ? "LIT" : "BIG");
 }
 
 static int
@@ -368,7 +369,7 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master,
 
 	ret = rockchip_hdmi_parse_dt(hdmi);
 	if (ret) {
-		dev_err(hdmi->dev, "Unable to parse OF data\n");
+		DRM_DEV_ERROR(hdmi->dev, "Unable to parse OF data\n");
 		return ret;
 	}
 

drivers/gpu/drm/rockchip/inno_hdmi.c

@@ -224,7 +224,7 @@ static void inno_hdmi_set_pwr_mode(struct inno_hdmi *hdmi, int mode)
 		break;
 
 	default:
-		dev_err(hdmi->dev, "Unknown power mode %d\n", mode);
+		DRM_DEV_ERROR(hdmi->dev, "Unknown power mode %d\n", mode);
 	}
 }
 
@@ -742,8 +742,9 @@ static int inno_hdmi_i2c_xfer(struct i2c_adapter *adap,
 	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
 
 	for (i = 0; i < num; i++) {
-		dev_dbg(hdmi->dev, "xfer: num: %d/%d, len: %d, flags: %#x\n",
-			i + 1, num, msgs[i].len, msgs[i].flags);
+		DRM_DEV_DEBUG(hdmi->dev,
+			      "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			      i + 1, num, msgs[i].len, msgs[i].flags);
 
 		if (msgs[i].flags & I2C_M_RD)
 			ret = inno_hdmi_i2c_read(hdmi, &msgs[i]);
@@ -806,7 +807,7 @@ static struct i2c_adapter *inno_hdmi_i2c_adapter(struct inno_hdmi *hdmi)
 
 	hdmi->i2c = i2c;
 
-	dev_info(hdmi->dev, "registered %s I2C bus driver\n", adap->name);
+	DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver\n", adap->name);
 
 	return adap;
 }
@@ -838,13 +839,14 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
 
 	hdmi->pclk = devm_clk_get(hdmi->dev, "pclk");
 	if (IS_ERR(hdmi->pclk)) {
-		dev_err(hdmi->dev, "Unable to get HDMI pclk clk\n");
+		DRM_DEV_ERROR(hdmi->dev, "Unable to get HDMI pclk clk\n");
 		return PTR_ERR(hdmi->pclk);
 	}
 
 	ret = clk_prepare_enable(hdmi->pclk);
 	if (ret) {
-		dev_err(hdmi->dev, "Cannot enable HDMI pclk clock: %d\n", ret);
+		DRM_DEV_ERROR(hdmi->dev,
+			      "Cannot enable HDMI pclk clock: %d\n", ret);
 		return ret;
 	}
 

drivers/gpu/drm/rockchip/rockchip_drm_drv.c

@@ -58,7 +58,7 @@ int rockchip_drm_dma_attach_device(struct drm_device *drm_dev,
 
 	ret = iommu_attach_device(private->domain, dev);
 	if (ret) {
-		dev_err(dev, "Failed to attach iommu device\n");
+		DRM_DEV_ERROR(dev, "Failed to attach iommu device\n");
 		return ret;
 	}
 
@@ -373,8 +373,9 @@ static int rockchip_drm_platform_of_probe(struct device *dev)
 
 		iommu = of_parse_phandle(port->parent, "iommus", 0);
 		if (!iommu || !of_device_is_available(iommu->parent)) {
-			dev_dbg(dev, "no iommu attached for %pOF, using non-iommu buffers\n",
-				port->parent);
+			DRM_DEV_DEBUG(dev,
+				      "no iommu attached for %pOF, using non-iommu buffers\n",
+				      port->parent);
 			/*
 			 * if there is a crtc not support iommu, force set all
 			 * crtc use non-iommu buffer.
@@ -389,12 +390,13 @@ static int rockchip_drm_platform_of_probe(struct device *dev)
 	}
 
 	if (i == 0) {
-		dev_err(dev, "missing 'ports' property\n");
+		DRM_DEV_ERROR(dev, "missing 'ports' property\n");
 		return -ENODEV;
 	}
 
 	if (!found) {
-		dev_err(dev, "No available vop found for display-subsystem.\n");
+		DRM_DEV_ERROR(dev,
+			      "No available vop found for display-subsystem.\n");
 		return -ENODEV;
 	}
 
@@ -453,6 +455,8 @@ static int __init rockchip_drm_init(void)
 
 	num_rockchip_sub_drivers = 0;
 	ADD_ROCKCHIP_SUB_DRIVER(vop_platform_driver, CONFIG_DRM_ROCKCHIP);
+	ADD_ROCKCHIP_SUB_DRIVER(rockchip_lvds_driver,
+				CONFIG_ROCKCHIP_LVDS);
 	ADD_ROCKCHIP_SUB_DRIVER(rockchip_dp_driver,
 				CONFIG_ROCKCHIP_ANALOGIX_DP);
 	ADD_ROCKCHIP_SUB_DRIVER(cdn_dp_driver, CONFIG_ROCKCHIP_CDN_DP);

drivers/gpu/drm/rockchip/rockchip_drm_drv.h

@@ -69,5 +69,6 @@ extern struct platform_driver dw_hdmi_rockchip_pltfm_driver;
 extern struct platform_driver dw_mipi_dsi_driver;
 extern struct platform_driver inno_hdmi_driver;
 extern struct platform_driver rockchip_dp_driver;
+extern struct platform_driver rockchip_lvds_driver;
 extern struct platform_driver vop_platform_driver;
 #endif /* _ROCKCHIP_DRM_DRV_H_ */

drivers/gpu/drm/rockchip/rockchip_drm_fb.c

@@ -100,8 +100,9 @@ rockchip_fb_alloc(struct drm_device *dev, const struct drm_mode_fb_cmd2 *mode_cm
 	ret = drm_framebuffer_init(dev, &rockchip_fb->fb,
 				   &rockchip_drm_fb_funcs);
 	if (ret) {
-		dev_err(dev->dev, "Failed to initialize framebuffer: %d\n",
-			ret);
+		DRM_DEV_ERROR(dev->dev,
+			      "Failed to initialize framebuffer: %d\n",
+			      ret);
 		kfree(rockchip_fb);
 		return ERR_PTR(ret);
 	}
@@ -134,7 +135,8 @@ rockchip_user_fb_create(struct drm_device *dev, struct drm_file *file_priv,
 
 		obj = drm_gem_object_lookup(file_priv, mode_cmd->handles[i]);
 		if (!obj) {
-			dev_err(dev->dev, "Failed to lookup GEM object\n");
+			DRM_DEV_ERROR(dev->dev,
+				      "Failed to lookup GEM object\n");
 			ret = -ENXIO;
 			goto err_gem_object_unreference;
 		}

drivers/gpu/drm/rockchip/rockchip_drm_fbdev.c

@@ -76,7 +76,7 @@ static int rockchip_drm_fbdev_create(struct drm_fb_helper *helper,
 
 	fbi = drm_fb_helper_alloc_fbi(helper);
 	if (IS_ERR(fbi)) {
-		dev_err(dev->dev, "Failed to create framebuffer info.\n");
+		DRM_DEV_ERROR(dev->dev, "Failed to create framebuffer info.\n");
 		ret = PTR_ERR(fbi);
 		goto out;
 	}
@@ -84,7 +84,8 @@ static int rockchip_drm_fbdev_create(struct drm_fb_helper *helper,
 	helper->fb = rockchip_drm_framebuffer_init(dev, &mode_cmd,
 						   private->fbdev_bo);
 	if (IS_ERR(helper->fb)) {
-		dev_err(dev->dev, "Failed to allocate DRM framebuffer.\n");
+		DRM_DEV_ERROR(dev->dev,
+			      "Failed to allocate DRM framebuffer.\n");
 		ret = PTR_ERR(helper->fb);
 		goto out;
 	}
@@ -138,21 +139,24 @@ int rockchip_drm_fbdev_init(struct drm_device *dev)
 
 	ret = drm_fb_helper_init(dev, helper, ROCKCHIP_MAX_CONNECTOR);
 	if (ret < 0) {
-		dev_err(dev->dev, "Failed to initialize drm fb helper - %d.\n",
-			ret);
+		DRM_DEV_ERROR(dev->dev,
+			      "Failed to initialize drm fb helper - %d.\n",
+			      ret);
 		return ret;
 	}
 
 	ret = drm_fb_helper_single_add_all_connectors(helper);
 	if (ret < 0) {
-		dev_err(dev->dev, "Failed to add connectors - %d.\n", ret);
+		DRM_DEV_ERROR(dev->dev,
+			      "Failed to add connectors - %d.\n", ret);
 		goto err_drm_fb_helper_fini;
 	}
 
 	ret = drm_fb_helper_initial_config(helper, PREFERRED_BPP);
 	if (ret < 0) {
-		dev_err(dev->dev, "Failed to set initial hw config - %d.\n",
-			ret);
+		DRM_DEV_ERROR(dev->dev,
+			      "Failed to set initial hw config - %d.\n",
+			      ret);
 		goto err_drm_fb_helper_fini;
 	}
 

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -160,7 +160,7 @@ static void vop_reg_set(struct vop *vop, const struct vop_reg *reg,
 	int offset, mask, shift;
 
 	if (!reg || !reg->mask) {
-		dev_dbg(vop->dev, "Warning: not support %s\n", reg_name);
+		DRM_DEV_DEBUG(vop->dev, "Warning: not support %s\n", reg_name);
 		return;
 	}
 
@@ -499,7 +499,7 @@ static int vop_enable(struct drm_crtc *crtc)
 
 	ret = pm_runtime_get_sync(vop->dev);
 	if (ret < 0) {
-		dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
+		DRM_DEV_ERROR(vop->dev, "failed to get pm runtime: %d\n", ret);
 		return ret;
 	}
 
@@ -523,7 +523,8 @@ static int vop_enable(struct drm_crtc *crtc)
 	 */
 	ret = rockchip_drm_dma_attach_device(vop->drm_dev, vop->dev);
 	if (ret) {
-		dev_err(vop->dev, "failed to attach dma mapping, %d\n", ret);
+		DRM_DEV_ERROR(vop->dev,
+			      "failed to attach dma mapping, %d\n", ret);
 		goto err_disable_aclk;
 	}
 
@@ -1361,42 +1362,42 @@ static int vop_initial(struct vop *vop)
 
 	vop->hclk = devm_clk_get(vop->dev, "hclk_vop");
 	if (IS_ERR(vop->hclk)) {
-		dev_err(vop->dev, "failed to get hclk source\n");
+		DRM_DEV_ERROR(vop->dev, "failed to get hclk source\n");
 		return PTR_ERR(vop->hclk);
 	}
 	vop->aclk = devm_clk_get(vop->dev, "aclk_vop");
 	if (IS_ERR(vop->aclk)) {
-		dev_err(vop->dev, "failed to get aclk source\n");
+		DRM_DEV_ERROR(vop->dev, "failed to get aclk source\n");
 		return PTR_ERR(vop->aclk);
 	}
 	vop->dclk = devm_clk_get(vop->dev, "dclk_vop");
 	if (IS_ERR(vop->dclk)) {
-		dev_err(vop->dev, "failed to get dclk source\n");
+		DRM_DEV_ERROR(vop->dev, "failed to get dclk source\n");
 		return PTR_ERR(vop->dclk);
 	}
 
 	ret = pm_runtime_get_sync(vop->dev);
 	if (ret < 0) {
-		dev_err(vop->dev, "failed to get pm runtime: %d\n", ret);
+		DRM_DEV_ERROR(vop->dev, "failed to get pm runtime: %d\n", ret);
 		return ret;
 	}
 
 	ret = clk_prepare(vop->dclk);
 	if (ret < 0) {
-		dev_err(vop->dev, "failed to prepare dclk\n");
+		DRM_DEV_ERROR(vop->dev, "failed to prepare dclk\n");
 		goto err_put_pm_runtime;
 	}
 
 	/* Enable both the hclk and aclk to setup the vop */
 	ret = clk_prepare_enable(vop->hclk);
 	if (ret < 0) {
-		dev_err(vop->dev, "failed to prepare/enable hclk\n");
+		DRM_DEV_ERROR(vop->dev, "failed to prepare/enable hclk\n");
 		goto err_unprepare_dclk;
 	}
 
 	ret = clk_prepare_enable(vop->aclk);
 	if (ret < 0) {
-		dev_err(vop->dev, "failed to prepare/enable aclk\n");
+		DRM_DEV_ERROR(vop->dev, "failed to prepare/enable aclk\n");
 		goto err_disable_hclk;
 	}
 
@@ -1405,7 +1406,7 @@ static int vop_initial(struct vop *vop)
 	 */
 	ahb_rst = devm_reset_control_get(vop->dev, "ahb");
 	if (IS_ERR(ahb_rst)) {
-		dev_err(vop->dev, "failed to get ahb reset\n");
+		DRM_DEV_ERROR(vop->dev, "failed to get ahb reset\n");
 		ret = PTR_ERR(ahb_rst);
 		goto err_disable_aclk;
 	}
@@ -1434,7 +1435,7 @@ static int vop_initial(struct vop *vop)
 	 */
 	vop->dclk_rst = devm_reset_control_get(vop->dev, "dclk");
 	if (IS_ERR(vop->dclk_rst)) {
-		dev_err(vop->dev, "failed to get dclk reset\n");
+		DRM_DEV_ERROR(vop->dev, "failed to get dclk reset\n");
 		ret = PTR_ERR(vop->dclk_rst);
 		goto err_disable_aclk;
 	}
@@ -1511,7 +1512,7 @@ int rockchip_drm_wait_vact_end(struct drm_crtc *crtc, unsigned int mstimeout)
 	vop_line_flag_irq_disable(vop);
 
 	if (jiffies_left == 0) {
-		dev_err(vop->dev, "Timeout waiting for IRQ\n");
+		DRM_DEV_ERROR(vop->dev, "Timeout waiting for IRQ\n");
 		return -ETIMEDOUT;
 	}
 
@@ -1558,7 +1559,7 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
-		dev_err(dev, "cannot find irq for vop\n");
+		DRM_DEV_ERROR(dev, "cannot find irq for vop\n");
 		return irq;
 	}
 	vop->irq = (unsigned int)irq;
@@ -1584,7 +1585,8 @@ static int vop_bind(struct device *dev, struct device *master, void *data)
 
 	ret = vop_initial(vop);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "cannot initial vop dev - err %d\n", ret);
+		DRM_DEV_ERROR(&pdev->dev,
+			      "cannot initial vop dev - err %d\n", ret);
 		goto err_disable_pm_runtime;
 	}
 

drivers/gpu/drm/rockchip/rockchip_lvds.c

@@ -0,0 +1,581 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:
+ *      Mark Yao <mark.yao@rock-chips.com>
+ *      Sandy Huang <hjc@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_dp_helper.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_of.h>
+
+#include <linux/component.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "rockchip_drm_drv.h"
+#include "rockchip_drm_vop.h"
+#include "rockchip_lvds.h"
+
+#define DISPLAY_OUTPUT_RGB		0
+#define DISPLAY_OUTPUT_LVDS		1
+#define DISPLAY_OUTPUT_DUAL_LVDS	2
+
+#define connector_to_lvds(c) \
+		container_of(c, struct rockchip_lvds, connector)
+
+#define encoder_to_lvds(c) \
+		container_of(c, struct rockchip_lvds, encoder)
+
+/**
+ * rockchip_lvds_soc_data - rockchip lvds Soc private data
+ * @ch1_offset: lvds channel 1 registe offset
+ * grf_soc_con6: general registe offset for LVDS contrl
+ * grf_soc_con7: general registe offset for LVDS contrl
+ * has_vop_sel: to indicate whether need to choose from different VOP.
+ */
+struct rockchip_lvds_soc_data {
+	u32 ch1_offset;
+	int grf_soc_con6;
+	int grf_soc_con7;
+	bool has_vop_sel;
+};
+
+struct rockchip_lvds {
+	struct device *dev;
+	void __iomem *regs;
+	struct regmap *grf;
+	struct clk *pclk;
+	const struct rockchip_lvds_soc_data *soc_data;
+	int output; /* rgb lvds or dual lvds output */
+	int format; /* vesa or jeida format */
+	struct drm_device *drm_dev;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
+	struct drm_connector connector;
+	struct drm_encoder encoder;
+	struct dev_pin_info *pins;
+};
+
+static inline void lvds_writel(struct rockchip_lvds *lvds, u32 offset, u32 val)
+{
+	writel_relaxed(val, lvds->regs + offset);
+	if (lvds->output == DISPLAY_OUTPUT_LVDS)
+		return;
+	writel_relaxed(val, lvds->regs + offset + lvds->soc_data->ch1_offset);
+}
+
+static inline int lvds_name_to_format(const char *s)
+{
+	if (strncmp(s, "jeida-18", 8) == 0)
+		return LVDS_JEIDA_18;
+	else if (strncmp(s, "jeida-24", 8) == 0)
+		return LVDS_JEIDA_24;
+	else if (strncmp(s, "vesa-24", 7) == 0)
+		return LVDS_VESA_24;
+
+	return -EINVAL;
+}
+
+static inline int lvds_name_to_output(const char *s)
+{
+	if (strncmp(s, "rgb", 3) == 0)
+		return DISPLAY_OUTPUT_RGB;
+	else if (strncmp(s, "lvds", 4) == 0)
+		return DISPLAY_OUTPUT_LVDS;
+	else if (strncmp(s, "duallvds", 8) == 0)
+		return DISPLAY_OUTPUT_DUAL_LVDS;
+
+	return -EINVAL;
+}
+
+static int rockchip_lvds_poweron(struct rockchip_lvds *lvds)
+{
+	int ret;
+	u32 val;
+
+	ret = clk_enable(lvds->pclk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(lvds->dev, "failed to enable lvds pclk %d\n", ret);
+		return ret;
+	}
+	ret = pm_runtime_get_sync(lvds->dev);
+	if (ret < 0) {
+		DRM_DEV_ERROR(lvds->dev, "failed to get pm runtime: %d\n", ret);
+		clk_disable(lvds->pclk);
+		return ret;
+	}
+	val = RK3288_LVDS_CH0_REG0_LANE4_EN | RK3288_LVDS_CH0_REG0_LANE3_EN |
+		RK3288_LVDS_CH0_REG0_LANE2_EN | RK3288_LVDS_CH0_REG0_LANE1_EN |
+		RK3288_LVDS_CH0_REG0_LANE0_EN;
+	if (lvds->output == DISPLAY_OUTPUT_RGB) {
+		val |= RK3288_LVDS_CH0_REG0_TTL_EN |
+			RK3288_LVDS_CH0_REG0_LANECK_EN;
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG0, val);
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG2,
+			    RK3288_LVDS_PLL_FBDIV_REG2(0x46));
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG4,
+			    RK3288_LVDS_CH0_REG4_LANECK_TTL_MODE |
+			    RK3288_LVDS_CH0_REG4_LANE4_TTL_MODE |
+			    RK3288_LVDS_CH0_REG4_LANE3_TTL_MODE |
+			    RK3288_LVDS_CH0_REG4_LANE2_TTL_MODE |
+			    RK3288_LVDS_CH0_REG4_LANE1_TTL_MODE |
+			    RK3288_LVDS_CH0_REG4_LANE0_TTL_MODE);
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG5,
+			    RK3288_LVDS_CH0_REG5_LANECK_TTL_DATA |
+			    RK3288_LVDS_CH0_REG5_LANE4_TTL_DATA |
+			    RK3288_LVDS_CH0_REG5_LANE3_TTL_DATA |
+			    RK3288_LVDS_CH0_REG5_LANE2_TTL_DATA |
+			    RK3288_LVDS_CH0_REG5_LANE1_TTL_DATA |
+			    RK3288_LVDS_CH0_REG5_LANE0_TTL_DATA);
+	} else {
+		val |= RK3288_LVDS_CH0_REG0_LVDS_EN |
+			    RK3288_LVDS_CH0_REG0_LANECK_EN;
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG0, val);
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG1,
+			    RK3288_LVDS_CH0_REG1_LANECK_BIAS |
+			    RK3288_LVDS_CH0_REG1_LANE4_BIAS |
+			    RK3288_LVDS_CH0_REG1_LANE3_BIAS |
+			    RK3288_LVDS_CH0_REG1_LANE2_BIAS |
+			    RK3288_LVDS_CH0_REG1_LANE1_BIAS |
+			    RK3288_LVDS_CH0_REG1_LANE0_BIAS);
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG2,
+			    RK3288_LVDS_CH0_REG2_RESERVE_ON |
+			    RK3288_LVDS_CH0_REG2_LANECK_LVDS_MODE |
+			    RK3288_LVDS_CH0_REG2_LANE4_LVDS_MODE |
+			    RK3288_LVDS_CH0_REG2_LANE3_LVDS_MODE |
+			    RK3288_LVDS_CH0_REG2_LANE2_LVDS_MODE |
+			    RK3288_LVDS_CH0_REG2_LANE1_LVDS_MODE |
+			    RK3288_LVDS_CH0_REG2_LANE0_LVDS_MODE |
+			    RK3288_LVDS_PLL_FBDIV_REG2(0x46));
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG4, 0x00);
+		lvds_writel(lvds, RK3288_LVDS_CH0_REG5, 0x00);
+	}
+	lvds_writel(lvds, RK3288_LVDS_CH0_REG3, RK3288_LVDS_PLL_FBDIV_REG3(0x46));
+	lvds_writel(lvds, RK3288_LVDS_CH0_REGD, RK3288_LVDS_PLL_PREDIV_REGD(0x0a));
+	lvds_writel(lvds, RK3288_LVDS_CH0_REG20, RK3288_LVDS_CH0_REG20_LSB);
+
+	lvds_writel(lvds, RK3288_LVDS_CFG_REGC, RK3288_LVDS_CFG_REGC_PLL_ENABLE);
+	lvds_writel(lvds, RK3288_LVDS_CFG_REG21, RK3288_LVDS_CFG_REG21_TX_ENABLE);
+
+	return 0;
+}
+
+static void rockchip_lvds_poweroff(struct rockchip_lvds *lvds)
+{
+	int ret;
+	u32 val;
+
+	lvds_writel(lvds, RK3288_LVDS_CFG_REG21, RK3288_LVDS_CFG_REG21_TX_ENABLE);
+	lvds_writel(lvds, RK3288_LVDS_CFG_REGC, RK3288_LVDS_CFG_REGC_PLL_ENABLE);
+	val = LVDS_DUAL | LVDS_TTL_EN | LVDS_CH0_EN | LVDS_CH1_EN | LVDS_PWRDN;
+	val |= val << 16;
+	ret = regmap_write(lvds->grf, lvds->soc_data->grf_soc_con7, val);
+	if (ret != 0)
+		DRM_DEV_ERROR(lvds->dev, "Could not write to GRF: %d\n", ret);
+
+	pm_runtime_put(lvds->dev);
+	clk_disable(lvds->pclk);
+}
+
+static const struct drm_connector_funcs rockchip_lvds_connector_funcs = {
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static int rockchip_lvds_connector_get_modes(struct drm_connector *connector)
+{
+	struct rockchip_lvds *lvds = connector_to_lvds(connector);
+	struct drm_panel *panel = lvds->panel;
+
+	return drm_panel_get_modes(panel);
+}
+
+static const
+struct drm_connector_helper_funcs rockchip_lvds_connector_helper_funcs = {
+	.get_modes = rockchip_lvds_connector_get_modes,
+};
+
+static void rockchip_lvds_grf_config(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode)
+{
+	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
+	u8 pin_hsync = (mode->flags & DRM_MODE_FLAG_PHSYNC) ? 1 : 0;
+	u8 pin_dclk = (mode->flags & DRM_MODE_FLAG_PCSYNC) ? 1 : 0;
+	u32 val;
+	int ret;
+
+	/* iomux to LCD data/sync mode */
+	if (lvds->output == DISPLAY_OUTPUT_RGB)
+		if (lvds->pins && !IS_ERR(lvds->pins->default_state))
+			pinctrl_select_state(lvds->pins->p,
+					     lvds->pins->default_state);
+	val = lvds->format | LVDS_CH0_EN;
+	if (lvds->output == DISPLAY_OUTPUT_RGB)
+		val |= LVDS_TTL_EN | LVDS_CH1_EN;
+	else if (lvds->output == DISPLAY_OUTPUT_DUAL_LVDS)
+		val |= LVDS_DUAL | LVDS_CH1_EN;
+
+	if ((mode->htotal - mode->hsync_start) & 0x01)
+		val |= LVDS_START_PHASE_RST_1;
+
+	val |= (pin_dclk << 8) | (pin_hsync << 9);
+	val |= (0xffff << 16);
+	ret = regmap_write(lvds->grf, lvds->soc_data->grf_soc_con7, val);
+	if (ret != 0) {
+		DRM_DEV_ERROR(lvds->dev, "Could not write to GRF: %d\n", ret);
+		return;
+	}
+}
+
+static int rockchip_lvds_set_vop_source(struct rockchip_lvds *lvds,
+					struct drm_encoder *encoder)
+{
+	u32 val;
+	int ret;
+
+	if (!lvds->soc_data->has_vop_sel)
+		return 0;
+
+	ret = drm_of_encoder_active_endpoint_id(lvds->dev->of_node, encoder);
+	if (ret < 0)
+		return ret;
+
+	val = RK3288_LVDS_SOC_CON6_SEL_VOP_LIT << 16;
+	if (ret)
+		val |= RK3288_LVDS_SOC_CON6_SEL_VOP_LIT;
+
+	ret = regmap_write(lvds->grf, lvds->soc_data->grf_soc_con6, val);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int
+rockchip_lvds_encoder_atomic_check(struct drm_encoder *encoder,
+				   struct drm_crtc_state *crtc_state,
+				   struct drm_connector_state *conn_state)
+{
+	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+
+	s->output_mode = ROCKCHIP_OUT_MODE_P888;
+	s->output_type = DRM_MODE_CONNECTOR_LVDS;
+
+	return 0;
+}
+
+static void rockchip_lvds_encoder_enable(struct drm_encoder *encoder)
+{
+	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	int ret;
+
+	drm_panel_prepare(lvds->panel);
+	ret = rockchip_lvds_poweron(lvds);
+	if (ret < 0) {
+		DRM_DEV_ERROR(lvds->dev, "failed to power on lvds: %d\n", ret);
+		drm_panel_unprepare(lvds->panel);
+	}
+	rockchip_lvds_grf_config(encoder, mode);
+	rockchip_lvds_set_vop_source(lvds, encoder);
+	drm_panel_enable(lvds->panel);
+}
+
+static void rockchip_lvds_encoder_disable(struct drm_encoder *encoder)
+{
+	struct rockchip_lvds *lvds = encoder_to_lvds(encoder);
+
+	drm_panel_disable(lvds->panel);
+	rockchip_lvds_poweroff(lvds);
+	drm_panel_unprepare(lvds->panel);
+}
+
+static const
+struct drm_encoder_helper_funcs rockchip_lvds_encoder_helper_funcs = {
+	.enable = rockchip_lvds_encoder_enable,
+	.disable = rockchip_lvds_encoder_disable,
+	.atomic_check = rockchip_lvds_encoder_atomic_check,
+};
+
+static const struct drm_encoder_funcs rockchip_lvds_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static const struct rockchip_lvds_soc_data rk3288_lvds_data = {
+	.ch1_offset = 0x100,
+	.grf_soc_con6 = 0x025c,
+	.grf_soc_con7 = 0x0260,
+	.has_vop_sel = true,
+};
+
+static const struct of_device_id rockchip_lvds_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3288-lvds",
+		.data = &rk3288_lvds_data
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_lvds_dt_ids);
+
+static int rockchip_lvds_bind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct rockchip_lvds *lvds = dev_get_drvdata(dev);
+	struct drm_device *drm_dev = data;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+	struct device_node *remote = NULL;
+	struct device_node  *port, *endpoint;
+	int ret;
+	const char *name;
+	u32 endpoint_id;
+
+	lvds->drm_dev = drm_dev;
+	port = of_graph_get_port_by_id(dev->of_node, 1);
+	if (!port) {
+		DRM_DEV_ERROR(dev,
+			      "can't found port point, please init lvds panel port!\n");
+		return -EINVAL;
+	}
+	for_each_child_of_node(port, endpoint) {
+		of_property_read_u32(endpoint, "reg", &endpoint_id);
+		ret = drm_of_find_panel_or_bridge(dev->of_node, 1, endpoint_id,
+						  &lvds->panel, &lvds->bridge);
+		if (!ret)
+			break;
+	}
+	if (ret) {
+		DRM_DEV_ERROR(dev, "failed to find panel and bridge node\n");
+		ret  = -EPROBE_DEFER;
+		goto err_put_port;
+	}
+	if (lvds->panel)
+		remote = lvds->panel->dev->of_node;
+	else
+		remote = lvds->bridge->of_node;
+	if (of_property_read_string(dev->of_node, "rockchip,output", &name))
+		/* default set it as output rgb */
+		lvds->output = DISPLAY_OUTPUT_RGB;
+	else
+		lvds->output = lvds_name_to_output(name);
+
+	if (lvds->output < 0) {
+		DRM_DEV_ERROR(dev, "invalid output type [%s]\n", name);
+		ret = lvds->output;
+		goto err_put_remote;
+	}
+
+	if (of_property_read_string(remote, "data-mapping", &name))
+		/* default set it as format vesa 18 */
+		lvds->format = LVDS_VESA_18;
+	else
+		lvds->format = lvds_name_to_format(name);
+
+	if (lvds->format < 0) {
+		DRM_DEV_ERROR(dev, "invalid data-mapping format [%s]\n", name);
+		ret = lvds->format;
+		goto err_put_remote;
+	}
+
+	encoder = &lvds->encoder;
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
+							     dev->of_node);
+
+	ret = drm_encoder_init(drm_dev, encoder, &rockchip_lvds_encoder_funcs,
+			       DRM_MODE_ENCODER_LVDS, NULL);
+	if (ret < 0) {
+		DRM_DEV_ERROR(drm_dev->dev,
+			      "failed to initialize encoder: %d\n", ret);
+		goto err_put_remote;
+	}
+
+	drm_encoder_helper_add(encoder, &rockchip_lvds_encoder_helper_funcs);
+
+	if (lvds->panel) {
+		connector = &lvds->connector;
+		connector->dpms = DRM_MODE_DPMS_OFF;
+		ret = drm_connector_init(drm_dev, connector,
+					 &rockchip_lvds_connector_funcs,
+					 DRM_MODE_CONNECTOR_LVDS);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to initialize connector: %d\n", ret);
+			goto err_free_encoder;
+		}
+
+		drm_connector_helper_add(connector,
+					 &rockchip_lvds_connector_helper_funcs);
+
+		ret = drm_mode_connector_attach_encoder(connector, encoder);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach encoder: %d\n", ret);
+			goto err_free_connector;
+		}
+
+		ret = drm_panel_attach(lvds->panel, connector);
+		if (ret < 0) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach panel: %d\n", ret);
+			goto err_free_connector;
+		}
+	} else {
+		lvds->bridge->encoder = encoder;
+		ret = drm_bridge_attach(encoder, lvds->bridge, NULL);
+		if (ret) {
+			DRM_DEV_ERROR(drm_dev->dev,
+				      "failed to attach bridge: %d\n", ret);
+			goto err_free_encoder;
+		}
+		encoder->bridge = lvds->bridge;
+	}
+
+	pm_runtime_enable(dev);
+	of_node_put(remote);
+	of_node_put(port);
+
+	return 0;
+
+err_free_connector:
+	drm_connector_cleanup(connector);
+err_free_encoder:
+	drm_encoder_cleanup(encoder);
+err_put_remote:
+	of_node_put(remote);
+err_put_port:
+	of_node_put(port);
+
+	return ret;
+}
+
+static void rockchip_lvds_unbind(struct device *dev, struct device *master,
+				void *data)
+{
+	struct rockchip_lvds *lvds = dev_get_drvdata(dev);
+
+	rockchip_lvds_encoder_disable(&lvds->encoder);
+	if (lvds->panel)
+		drm_panel_detach(lvds->panel);
+	pm_runtime_disable(dev);
+	drm_connector_cleanup(&lvds->connector);
+	drm_encoder_cleanup(&lvds->encoder);
+}
+
+static const struct component_ops rockchip_lvds_component_ops = {
+	.bind = rockchip_lvds_bind,
+	.unbind = rockchip_lvds_unbind,
+};
+
+static int rockchip_lvds_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_lvds *lvds;
+	const struct of_device_id *match;
+	struct resource *res;
+	int ret;
+
+	if (!dev->of_node)
+		return -ENODEV;
+
+	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
+	if (!lvds)
+		return -ENOMEM;
+
+	lvds->dev = dev;
+	match = of_match_node(rockchip_lvds_dt_ids, dev->of_node);
+	if (!match)
+		return -ENODEV;
+	lvds->soc_data = match->data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	lvds->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(lvds->regs))
+		return PTR_ERR(lvds->regs);
+
+	lvds->pclk = devm_clk_get(&pdev->dev, "pclk_lvds");
+	if (IS_ERR(lvds->pclk)) {
+		DRM_DEV_ERROR(dev, "could not get pclk_lvds\n");
+		return PTR_ERR(lvds->pclk);
+	}
+
+	lvds->pins = devm_kzalloc(lvds->dev, sizeof(*lvds->pins),
+				  GFP_KERNEL);
+	if (!lvds->pins)
+		return -ENOMEM;
+
+	lvds->pins->p = devm_pinctrl_get(lvds->dev);
+	if (IS_ERR(lvds->pins->p)) {
+		DRM_DEV_ERROR(dev, "no pinctrl handle\n");
+		devm_kfree(lvds->dev, lvds->pins);
+		lvds->pins = NULL;
+	} else {
+		lvds->pins->default_state =
+			pinctrl_lookup_state(lvds->pins->p, "lcdc");
+		if (IS_ERR(lvds->pins->default_state)) {
+			DRM_DEV_ERROR(dev, "no default pinctrl state\n");
+			devm_kfree(lvds->dev, lvds->pins);
+			lvds->pins = NULL;
+		}
+	}
+
+	lvds->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+						    "rockchip,grf");
+	if (IS_ERR(lvds->grf)) {
+		DRM_DEV_ERROR(dev, "missing rockchip,grf property\n");
+		return PTR_ERR(lvds->grf);
+	}
+
+	dev_set_drvdata(dev, lvds);
+
+	ret = clk_prepare(lvds->pclk);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "failed to prepare pclk_lvds\n");
+		return ret;
+	}
+	ret = component_add(&pdev->dev, &rockchip_lvds_component_ops);
+	if (ret < 0) {
+		DRM_DEV_ERROR(dev, "failed to add component\n");
+		clk_unprepare(lvds->pclk);
+	}
+
+	return ret;
+}
+
+static int rockchip_lvds_remove(struct platform_device *pdev)
+{
+	struct rockchip_lvds *lvds = dev_get_drvdata(&pdev->dev);
+
+	component_del(&pdev->dev, &rockchip_lvds_component_ops);
+	clk_unprepare(lvds->pclk);
+
+	return 0;
+}
+
+struct platform_driver rockchip_lvds_driver = {
+	.probe = rockchip_lvds_probe,
+	.remove = rockchip_lvds_remove,
+	.driver = {
+		   .name = "rockchip-lvds",
+		   .of_match_table = of_match_ptr(rockchip_lvds_dt_ids),
+	},
+};

drivers/gpu/drm/rockchip/rockchip_lvds.h

@@ -0,0 +1,114 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author:
+ *      Sandy Huang <hjc@rock-chips.com>
+ *      Mark Yao <mark.yao@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _ROCKCHIP_LVDS_
+#define _ROCKCHIP_LVDS_
+
+#define RK3288_LVDS_CH0_REG0			0x00
+#define RK3288_LVDS_CH0_REG0_LVDS_EN		BIT(7)
+#define RK3288_LVDS_CH0_REG0_TTL_EN		BIT(6)
+#define RK3288_LVDS_CH0_REG0_LANECK_EN		BIT(5)
+#define RK3288_LVDS_CH0_REG0_LANE4_EN		BIT(4)
+#define RK3288_LVDS_CH0_REG0_LANE3_EN		BIT(3)
+#define RK3288_LVDS_CH0_REG0_LANE2_EN		BIT(2)
+#define RK3288_LVDS_CH0_REG0_LANE1_EN		BIT(1)
+#define RK3288_LVDS_CH0_REG0_LANE0_EN		BIT(0)
+
+#define RK3288_LVDS_CH0_REG1			0x04
+#define RK3288_LVDS_CH0_REG1_LANECK_BIAS	BIT(5)
+#define RK3288_LVDS_CH0_REG1_LANE4_BIAS		BIT(4)
+#define RK3288_LVDS_CH0_REG1_LANE3_BIAS		BIT(3)
+#define RK3288_LVDS_CH0_REG1_LANE2_BIAS		BIT(2)
+#define RK3288_LVDS_CH0_REG1_LANE1_BIAS		BIT(1)
+#define RK3288_LVDS_CH0_REG1_LANE0_BIAS		BIT(0)
+
+#define RK3288_LVDS_CH0_REG2			0x08
+#define RK3288_LVDS_CH0_REG2_RESERVE_ON		BIT(7)
+#define RK3288_LVDS_CH0_REG2_LANECK_LVDS_MODE	BIT(6)
+#define RK3288_LVDS_CH0_REG2_LANE4_LVDS_MODE	BIT(5)
+#define RK3288_LVDS_CH0_REG2_LANE3_LVDS_MODE	BIT(4)
+#define RK3288_LVDS_CH0_REG2_LANE2_LVDS_MODE	BIT(3)
+#define RK3288_LVDS_CH0_REG2_LANE1_LVDS_MODE	BIT(2)
+#define RK3288_LVDS_CH0_REG2_LANE0_LVDS_MODE	BIT(1)
+#define RK3288_LVDS_CH0_REG2_PLL_FBDIV8		BIT(0)
+
+#define RK3288_LVDS_CH0_REG3			0x0c
+#define RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK	0xff
+
+#define RK3288_LVDS_CH0_REG4			0x10
+#define RK3288_LVDS_CH0_REG4_LANECK_TTL_MODE	BIT(5)
+#define RK3288_LVDS_CH0_REG4_LANE4_TTL_MODE	BIT(4)
+#define RK3288_LVDS_CH0_REG4_LANE3_TTL_MODE	BIT(3)
+#define RK3288_LVDS_CH0_REG4_LANE2_TTL_MODE	BIT(2)
+#define RK3288_LVDS_CH0_REG4_LANE1_TTL_MODE	BIT(1)
+#define RK3288_LVDS_CH0_REG4_LANE0_TTL_MODE	BIT(0)
+
+#define RK3288_LVDS_CH0_REG5			0x14
+#define RK3288_LVDS_CH0_REG5_LANECK_TTL_DATA	BIT(5)
+#define RK3288_LVDS_CH0_REG5_LANE4_TTL_DATA	BIT(4)
+#define RK3288_LVDS_CH0_REG5_LANE3_TTL_DATA	BIT(3)
+#define RK3288_LVDS_CH0_REG5_LANE2_TTL_DATA	BIT(2)
+#define RK3288_LVDS_CH0_REG5_LANE1_TTL_DATA	BIT(1)
+#define RK3288_LVDS_CH0_REG5_LANE0_TTL_DATA	BIT(0)
+
+#define RK3288_LVDS_CFG_REGC			0x30
+#define RK3288_LVDS_CFG_REGC_PLL_ENABLE		0x00
+#define RK3288_LVDS_CFG_REGC_PLL_DISABLE	0xff
+
+#define RK3288_LVDS_CH0_REGD			0x34
+#define RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK	0x1f
+
+#define RK3288_LVDS_CH0_REG20			0x80
+#define RK3288_LVDS_CH0_REG20_MSB		0x45
+#define RK3288_LVDS_CH0_REG20_LSB		0x44
+
+#define RK3288_LVDS_CFG_REG21			0x84
+#define RK3288_LVDS_CFG_REG21_TX_ENABLE		0x92
+#define RK3288_LVDS_CFG_REG21_TX_DISABLE	0x00
+#define RK3288_LVDS_CH1_OFFSET                 0x100
+
+/* fbdiv value is split over 2 registers, with bit8 in reg2 */
+#define RK3288_LVDS_PLL_FBDIV_REG2(_fbd) \
+		(_fbd & BIT(8) ? RK3288_LVDS_CH0_REG2_PLL_FBDIV8 : 0)
+#define RK3288_LVDS_PLL_FBDIV_REG3(_fbd) \
+		(_fbd & RK3288_LVDS_CH0_REG3_PLL_FBDIV_MASK)
+#define RK3288_LVDS_PLL_PREDIV_REGD(_pd) \
+		(_pd & RK3288_LVDS_CH0_REGD_PLL_PREDIV_MASK)
+
+#define RK3288_LVDS_SOC_CON6_SEL_VOP_LIT	BIT(3)
+
+#define LVDS_FMT_MASK				(0x07 << 16)
+#define LVDS_MSB				BIT(3)
+#define LVDS_DUAL				BIT(4)
+#define LVDS_FMT_1				BIT(5)
+#define LVDS_TTL_EN				BIT(6)
+#define LVDS_START_PHASE_RST_1			BIT(7)
+#define LVDS_DCLK_INV				BIT(8)
+#define LVDS_CH0_EN				BIT(11)
+#define LVDS_CH1_EN				BIT(12)
+#define LVDS_PWRDN				BIT(15)
+
+#define LVDS_24BIT				(0 << 1)
+#define LVDS_18BIT				(1 << 1)
+#define LVDS_FORMAT_VESA			(0 << 0)
+#define LVDS_FORMAT_JEIDA			(1 << 0)
+
+#define LVDS_VESA_24				0
+#define LVDS_JEIDA_24				1
+#define LVDS_VESA_18				2
+#define LVDS_JEIDA_18				3
+
+#endif /* _ROCKCHIP_LVDS_ */

drivers/gpu/drm/rockchip/rockchip_vop_reg.c

@@ -533,7 +533,7 @@ static int vop_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 
 	if (!dev->of_node) {
-		dev_err(dev, "can't find vop devices\n");
+		DRM_DEV_ERROR(dev, "can't find vop devices\n");
 		return -ENODEV;
 	}
 

drivers/gpu/drm/sti/sti_drv.c

@@ -16,6 +16,7 @@
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_of.h>
 
@@ -145,7 +146,7 @@ static void sti_output_poll_changed(struct drm_device *ddev)
 }
 
 static const struct drm_mode_config_funcs sti_mode_config_funcs = {
-	.fb_create = drm_fb_cma_create,
+	.fb_create = drm_gem_fb_create,
 	.output_poll_changed = sti_output_poll_changed,
 	.atomic_check = sti_atomic_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/sti/sti_dvo.c

@@ -463,11 +463,7 @@ static int sti_dvo_bind(struct device *dev, struct device *master, void *data)
 	bridge->driver_private = dvo;
 	bridge->funcs = &sti_dvo_bridge_funcs;
 	bridge->of_node = dvo->dev.of_node;
-	err = drm_bridge_add(bridge);
-	if (err) {
-		DRM_ERROR("Failed to add bridge\n");
-		return err;
-	}
+	drm_bridge_add(bridge);
 
 	err = drm_bridge_attach(encoder, bridge, NULL);
 	if (err) {

drivers/gpu/drm/stm/drv.c

@@ -17,6 +17,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_fb_cma_helper.h>
 #include <drm/drm_gem_cma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 
 #include "ltdc.h"
 
@@ -31,7 +32,7 @@ static void drv_output_poll_changed(struct drm_device *ddev)
 }
 
 static const struct drm_mode_config_funcs drv_mode_config_funcs = {
-	.fb_create = drm_fb_cma_create,
+	.fb_create = drm_gem_fb_create,
 	.output_poll_changed = drv_output_poll_changed,
 	.atomic_check = drm_atomic_helper_check,
 	.atomic_commit = drm_atomic_helper_commit,

drivers/gpu/drm/stm/dw_mipi_dsi-stm.c

@@ -113,11 +113,13 @@ static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
 
 static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
 {
+	int divisor = idf * odf;
+
 	/* prevent from division by 0 */
-	if (idf * odf)
-		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
+	if (!divisor)
+		return 0;
 
-	return 0;
+	return DIV_ROUND_CLOSEST(clkin_khz * ndiv, divisor);
 }
 
 static int dsi_pll_get_params(int clkin_khz, int clkout_khz,

drivers/gpu/drm/sun4i/sun4i_drv.c

@@ -106,11 +106,6 @@ static int sun4i_drv_bind(struct device *dev)
 		goto free_drm;
 	}
 
-	/* drm_vblank_init calls kcalloc, which can fail */
-	ret = drm_vblank_init(drm, 1);
-	if (ret)
-		goto free_mem_region;
-
 	drm_mode_config_init(drm);
 
 	ret = component_bind_all(drm->dev, drm);
@@ -119,6 +114,11 @@ static int sun4i_drv_bind(struct device *dev)
 		goto cleanup_mode_config;
 	}
 
+	/* drm_vblank_init calls kcalloc, which can fail */
+	ret = drm_vblank_init(drm, drm->mode_config.num_crtc);
+	if (ret)
+		goto free_mem_region;
+
 	drm->irq_enabled = true;
 
 	/* Remove early framebuffers (ie. simplefb) */
@@ -200,11 +200,39 @@ static int compare_of(struct device *dev, void *data)
 	return dev->of_node == data;
 }
 
+/*
+ * The encoder drivers use drm_of_find_possible_crtcs to get upstream
+ * crtcs from the device tree using of_graph. For the results to be
+ * correct, encoders must be probed/bound after _all_ crtcs have been
+ * created. The existing code uses a depth first recursive traversal
+ * of the of_graph, which means the encoders downstream of the TCON
+ * get add right after the first TCON. The second TCON or CRTC will
+ * never be properly associated with encoders connected to it.
+ *
+ * Also, in a dual display pipeline setup, both frontends can feed
+ * either backend, and both backends can feed either TCON, we want
+ * all components of the same type to be added before the next type
+ * in the pipeline. Fortunately, the pipelines are perfectly symmetric,
+ * i.e. components of the same type are at the same depth when counted
+ * from the frontend. The only exception is the third pipeline in
+ * the A80 SoC, which we do not support anyway.
+ *
+ * Hence we can use a breadth first search traversal order to add
+ * components. We do not need to check for duplicates. The component
+ * matching system handles this for us.
+ */
+struct endpoint_list {
+	struct device_node *node;
+	struct list_head list;
+};
+
 static int sun4i_drv_add_endpoints(struct device *dev,
+				   struct list_head *endpoints,
 				   struct component_match **match,
 				   struct device_node *node)
 {
 	struct device_node *port, *ep, *remote;
+	struct endpoint_list *endpoint;
 	int count = 0;
 
 	/*
@@ -264,10 +292,15 @@ static int sun4i_drv_add_endpoints(struct device *dev,
 			}
 		}
 
-		/* Walk down our tree */
-		count += sun4i_drv_add_endpoints(dev, match, remote);
+		/* Add downstream nodes to the queue */
+		endpoint = kzalloc(sizeof(*endpoint), GFP_KERNEL);
+		if (!endpoint) {
+			of_node_put(remote);
+			return -ENOMEM;
+		}
 
-		of_node_put(remote);
+		endpoint->node = remote;
+		list_add_tail(&endpoint->list, endpoints);
 	}
 
 	return count;
@@ -277,7 +310,9 @@ static int sun4i_drv_probe(struct platform_device *pdev)
 {
 	struct component_match *match = NULL;
 	struct device_node *np = pdev->dev.of_node;
-	int i, count = 0;
+	struct endpoint_list *endpoint, *endpoint_temp;
+	int i, ret, count = 0;
+	LIST_HEAD(endpoints);
 
 	for (i = 0;; i++) {
 		struct device_node *pipeline = of_parse_phandle(np,
@@ -286,12 +321,31 @@ static int sun4i_drv_probe(struct platform_device *pdev)
 		if (!pipeline)
 			break;
 
-		count += sun4i_drv_add_endpoints(&pdev->dev, &match,
-						pipeline);
-		of_node_put(pipeline);
+		endpoint = kzalloc(sizeof(*endpoint), GFP_KERNEL);
+		if (!endpoint) {
+			ret = -ENOMEM;
+			goto err_free_endpoints;
+		}
 
-		DRM_DEBUG_DRIVER("Queued %d outputs on pipeline %d\n",
-				 count, i);
+		endpoint->node = pipeline;
+		list_add_tail(&endpoint->list, &endpoints);
+	}
+
+	list_for_each_entry_safe(endpoint, endpoint_temp, &endpoints, list) {
+		/* process this endpoint */
+		ret = sun4i_drv_add_endpoints(&pdev->dev, &endpoints, &match,
+					      endpoint->node);
+
+		/* sun4i_drv_add_endpoints can fail to allocate memory */
+		if (ret < 0)
+			goto err_free_endpoints;
+
+		count += ret;
+
+		/* delete and cleanup the current entry */
+		list_del(&endpoint->list);
+		of_node_put(endpoint->node);
+		kfree(endpoint);
 	}
 
 	if (count)
@@ -300,6 +354,15 @@ static int sun4i_drv_probe(struct platform_device *pdev)
 						       match);
 	else
 		return 0;
+
+err_free_endpoints:
+	list_for_each_entry_safe(endpoint, endpoint_temp, &endpoints, list) {
+		list_del(&endpoint->list);
+		of_node_put(endpoint->node);
+		kfree(endpoint);
+	}
+
+	return ret;
 }
 
 static int sun4i_drv_remove(struct platform_device *pdev)

drivers/gpu/drm/sun4i/sun4i_tcon.c

@@ -463,42 +463,170 @@ static int sun4i_tcon_init_regmap(struct device *dev,
  * function in fact searches the corresponding engine, and the ID is
  * requested via the get_id function of the engine.
  */
-static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv,
-						   struct device_node *node)
+static struct sunxi_engine *
+sun4i_tcon_find_engine_traverse(struct sun4i_drv *drv,
+				struct device_node *node)
 {
 	struct device_node *port, *ep, *remote;
-	struct sunxi_engine *engine;
+	struct sunxi_engine *engine = ERR_PTR(-EINVAL);
 
 	port = of_graph_get_port_by_id(node, 0);
 	if (!port)
 		return ERR_PTR(-EINVAL);
 
+	/*
+	 * This only works if there is only one path from the TCON
+	 * to any display engine. Otherwise the probe order of the
+	 * TCONs and display engines is not guaranteed. They may
+	 * either bind to the wrong one, or worse, bind to the same
+	 * one if additional checks are not done.
+	 *
+	 * Bail out if there are multiple input connections.
+	 */
+	if (of_get_available_child_count(port) != 1)
+		goto out_put_port;
+
+	/* Get the first connection without specifying an ID */
+	ep = of_get_next_available_child(port, NULL);
+	if (!ep)
+		goto out_put_port;
+
+	remote = of_graph_get_remote_port_parent(ep);
+	if (!remote)
+		goto out_put_ep;
+
+	/* does this node match any registered engines? */
+	list_for_each_entry(engine, &drv->engine_list, list)
+		if (remote == engine->node)
+			goto out_put_remote;
+
+	/* keep looking through upstream ports */
+	engine = sun4i_tcon_find_engine_traverse(drv, remote);
+
+out_put_remote:
+	of_node_put(remote);
+out_put_ep:
+	of_node_put(ep);
+out_put_port:
+	of_node_put(port);
+
+	return engine;
+}
+
+/*
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we can look at any one of the input connections of
+ * the TCONs, and use that connection's remote endpoint ID as our own.
+ *
+ * Since the user of this function already finds the input port,
+ * the port is passed in directly without further checks.
+ */
+static int sun4i_tcon_of_get_id_from_port(struct device_node *port)
+{
+	struct device_node *ep;
+	int ret = -EINVAL;
+
+	/* try finding an upstream endpoint */
 	for_each_available_child_of_node(port, ep) {
-		remote = of_graph_get_remote_port_parent(ep);
+		struct device_node *remote;
+		u32 reg;
+
+		remote = of_graph_get_remote_endpoint(ep);
 		if (!remote)
 			continue;
 
-		/* does this node match any registered engines? */
-		list_for_each_entry(engine, &drv->engine_list, list) {
-			if (remote == engine->node) {
-				of_node_put(remote);
-				of_node_put(port);
-				return engine;
-			}
-		}
+		ret = of_property_read_u32(remote, "reg", &reg);
+		if (ret)
+			continue;
 
-		/* keep looking through upstream ports */
-		engine = sun4i_tcon_find_engine(drv, remote);
-		if (!IS_ERR(engine)) {
-			of_node_put(remote);
-			of_node_put(port);
-			return engine;
-		}
+		ret = reg;
 	}
 
+	return ret;
+}
+
+/*
+ * Once we know the TCON's id, we can look through the list of
+ * engines to find a matching one. We assume all engines have
+ * been probed and added to the list.
+ */
+static struct sunxi_engine *sun4i_tcon_get_engine_by_id(struct sun4i_drv *drv,
+							int id)
+{
+	struct sunxi_engine *engine;
+
+	list_for_each_entry(engine, &drv->engine_list, list)
+		if (engine->id == id)
+			return engine;
+
 	return ERR_PTR(-EINVAL);
 }
 
+/*
+ * On SoCs with the old display pipeline design (Display Engine 1.0),
+ * we assumed the TCON was always tied to just one backend. However
+ * this proved not to be the case. On the A31, the TCON can select
+ * either backend as its source. On the A20 (and likely on the A10),
+ * the backend can choose which TCON to output to.
+ *
+ * The device tree binding says that the remote endpoint ID of any
+ * connection between components, up to and including the TCON, of
+ * the display pipeline should be equal to the actual ID of the local
+ * component. Thus we should be able to look at any one of the input
+ * connections of the TCONs, and use that connection's remote endpoint
+ * ID as our own.
+ *
+ * However  the connections between the backend and TCON were assumed
+ * to be always singular, and their endpoit IDs were all incorrectly
+ * set to 0. This means for these old device trees, we cannot just look
+ * up the remote endpoint ID of a TCON input endpoint. TCON1 would be
+ * incorrectly identified as TCON0.
+ *
+ * This function first checks if the TCON node has 2 input endpoints.
+ * If so, then the device tree is a corrected version, and it will use
+ * sun4i_tcon_of_get_id() and sun4i_tcon_get_engine_by_id() from above
+ * to fetch the ID and engine directly. If not, then it is likely an
+ * old device trees, where the endpoint IDs were incorrect, but did not
+ * have endpoint connections between the backend and TCON across
+ * different display pipelines. It will fall back to the old method of
+ * traversing the  of_graph to try and find a matching engine by device
+ * node.
+ *
+ * In the case of single display pipeline device trees, either method
+ * works.
+ */
+static struct sunxi_engine *sun4i_tcon_find_engine(struct sun4i_drv *drv,
+						   struct device_node *node)
+{
+	struct device_node *port;
+	struct sunxi_engine *engine;
+
+	port = of_graph_get_port_by_id(node, 0);
+	if (!port)
+		return ERR_PTR(-EINVAL);
+
+	/*
+	 * Is this a corrected device tree with cross pipeline
+	 * connections between the backend and TCON?
+	 */
+	if (of_get_child_count(port) > 1) {
+		/* Get our ID directly from an upstream endpoint */
+		int id = sun4i_tcon_of_get_id_from_port(port);
+
+		/* Get our engine by matching our ID */
+		engine = sun4i_tcon_get_engine_by_id(drv, id);
+
+		of_node_put(port);
+		return engine;
+	}
+
+	/* Fallback to old method by traversing input endpoints */
+	of_node_put(port);
+	return sun4i_tcon_find_engine_traverse(drv, node);
+}
+
 static int sun4i_tcon_bind(struct device *dev, struct device *master,
 			   void *data)
 {
@@ -530,10 +658,7 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 	}
 
 	/* Make sure our TCON is reset */
-	if (!reset_control_status(tcon->lcd_rst))
-		reset_control_assert(tcon->lcd_rst);
-
-	ret = reset_control_deassert(tcon->lcd_rst);
+	ret = reset_control_reset(tcon->lcd_rst);
 	if (ret) {
 		dev_err(dev, "Couldn't deassert our reset line\n");
 		return ret;
@@ -574,6 +699,25 @@ static int sun4i_tcon_bind(struct device *dev, struct device *master,
 	if (ret < 0)
 		goto err_free_clocks;
 
+	if (tcon->quirks->needs_de_be_mux) {
+		/*
+		 * We assume there is no dynamic muxing of backends
+		 * and TCONs, so we select the backend with same ID.
+		 *
+		 * While dynamic selection might be interesting, since
+		 * the CRTC is tied to the TCON, while the layers are
+		 * tied to the backends, this means, we will need to
+		 * switch between groups of layers. There might not be
+		 * a way to represent this constraint in DRM.
+		 */
+		regmap_update_bits(tcon->regs, SUN4I_TCON0_CTL_REG,
+				   SUN4I_TCON0_CTL_SRC_SEL_MASK,
+				   tcon->id);
+		regmap_update_bits(tcon->regs, SUN4I_TCON1_CTL_REG,
+				   SUN4I_TCON1_CTL_SRC_SEL_MASK,
+				   tcon->id);
+	}
+
 	list_add_tail(&tcon->list, &drv->tcon_list);
 
 	return 0;
@@ -629,11 +773,13 @@ static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
 };
 
 static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
-	.has_channel_1	= true,
+	.has_channel_1		= true,
+	.needs_de_be_mux	= true,
 };
 
 static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
-	.has_channel_1	= true,
+	.has_channel_1		= true,
+	.needs_de_be_mux	= true,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {

drivers/gpu/drm/sun4i/sun4i_tcon.h

@@ -37,6 +37,7 @@
 #define SUN4I_TCON0_CTL_TCON_ENABLE			BIT(31)
 #define SUN4I_TCON0_CTL_CLK_DELAY_MASK			GENMASK(8, 4)
 #define SUN4I_TCON0_CTL_CLK_DELAY(delay)		((delay << 4) & SUN4I_TCON0_CTL_CLK_DELAY_MASK)
+#define SUN4I_TCON0_CTL_SRC_SEL_MASK			GENMASK(2, 0)
 
 #define SUN4I_TCON0_DCLK_REG			0x44
 #define SUN4I_TCON0_DCLK_GATE_BIT			(31)
@@ -85,6 +86,7 @@
 #define SUN4I_TCON1_CTL_INTERLACE_ENABLE		BIT(20)
 #define SUN4I_TCON1_CTL_CLK_DELAY_MASK			GENMASK(8, 4)
 #define SUN4I_TCON1_CTL_CLK_DELAY(delay)		((delay << 4) & SUN4I_TCON1_CTL_CLK_DELAY_MASK)
+#define SUN4I_TCON1_CTL_SRC_SEL_MASK			GENMASK(1, 0)
 
 #define SUN4I_TCON1_BASIC0_REG			0x94
 #define SUN4I_TCON1_BASIC0_X(width)			((((width) - 1) & 0xfff) << 16)
@@ -146,6 +148,7 @@
 struct sun4i_tcon_quirks {
 	bool	has_unknown_mux; /* sun5i has undocumented mux */
 	bool	has_channel_1;	/* a33 does not have channel 1 */
+	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 };
 
 struct sun4i_tcon {

drivers/gpu/drm/tilcdc/tilcdc_drv.c

@@ -23,6 +23,7 @@
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
 
 #include "tilcdc_drv.h"
 #include "tilcdc_regs.h"
@@ -65,7 +66,7 @@ static struct of_device_id tilcdc_of_match[];
 static struct drm_framebuffer *tilcdc_fb_create(struct drm_device *dev,
 		struct drm_file *file_priv, const struct drm_mode_fb_cmd2 *mode_cmd)
 {
-	return drm_fb_cma_create(dev, file_priv, mode_cmd);
+	return drm_gem_fb_create(dev, file_priv, mode_cmd);
 }
 
 static void tilcdc_fb_output_poll_changed(struct drm_device *dev)

drivers/gpu/drm/tinydrm/mi0283qt.c

@@ -163,7 +163,6 @@ MODULE_DEVICE_TABLE(spi, mi0283qt_id);
 static int mi0283qt_probe(struct spi_device *spi)
 {
 	struct device *dev = &spi->dev;
-	struct tinydrm_device *tdev;
 	struct mipi_dbi *mipi;
 	struct gpio_desc *dc;
 	u32 rotation = 0;
@@ -215,20 +214,9 @@ static int mi0283qt_probe(struct spi_device *spi)
 		return ret;
 	}
 
-	tdev = &mipi->tinydrm;
-
-	ret = devm_tinydrm_register(tdev);
-	if (ret)
-		return ret;
-
 	spi_set_drvdata(spi, mipi);
 
-	DRM_DEBUG_DRIVER("Initialized %s:%s @%uMHz on minor %d\n",
-			 tdev->drm->driver->name, dev_name(dev),
-			 spi->max_speed_hz / 1000000,
-			 tdev->drm->primary->index);
-
-	return 0;
+	return devm_tinydrm_register(&mipi->tinydrm);
 }
 
 static void mi0283qt_shutdown(struct spi_device *spi)

drivers/gpu/drm/tinydrm/mipi-dbi.c

@@ -842,6 +842,8 @@ int mipi_dbi_spi_init(struct spi_device *spi, struct mipi_dbi *mipi,
 			return -ENOMEM;
 	}
 
+	DRM_DEBUG_DRIVER("SPI speed: %uMHz\n", spi->max_speed_hz / 1000000);
+
 	return 0;
 }
 EXPORT_SYMBOL(mipi_dbi_spi_init);