Merge tag 'v3.17-rc1' into patchwork

Linux 3.17-rc1

.gitignore

@@ -34,6 +34,7 @@
 *.gcno
 modules.builtin
 Module.symvers
+*.dwo
 
 #
 # Top-level generic files

.mailmap

@@ -62,6 +62,11 @@ Jeff Garzik <jgarzik@pretzel.yyz.us>
 Jens Axboe <axboe@suse.de>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
 John Stultz <johnstul@us.ibm.com>
+<josh@joshtriplett.org> <josh@freedesktop.org>
+<josh@joshtriplett.org> <josh@kernel.org>
+<josh@joshtriplett.org> <josht@linux.vnet.ibm.com>
+<josh@joshtriplett.org> <josht@us.ibm.com>
+<josh@joshtriplett.org> <josht@vnet.ibm.com>
 Juha Yrjola <at solidboot.com>
 Juha Yrjola <juha.yrjola@nokia.com>
 Juha Yrjola <juha.yrjola@solidboot.com>

CREDITS

@@ -1381,6 +1381,9 @@ S: 17 rue Danton
 S: F - 94270 Le Kremlin-Bicêtre
 S: France
 
+N: Jack Hammer
+D: IBM ServeRAID RAID (ips) driver maintenance
+
 N: Greg Hankins
 E: gregh@cc.gatech.edu
 D: fixed keyboard driver to separate LED and locking status
@@ -1691,6 +1694,10 @@ S: Reading
 S: RG6 2NU
 S: United Kingdom
 
+N: Dave Jeffery
+E: dhjeffery@gmail.com
+D: SCSI hacks and IBM ServeRAID RAID driver maintenance
+
 N: Jakub Jelinek
 E: jakub@redhat.com
 W: http://sunsite.mff.cuni.cz/~jj
@@ -3511,10 +3518,11 @@ S: MacGregor A.C.T 2615
 S: Australia
 
 N: Josh Triplett
-E: josh@freedesktop.org
-P: 1024D/D0FE7AFB B24A 65C9 1D71 2AC2 DE87  CA26 189B 9946 D0FE 7AFB
-D: rcutorture maintainer
+E: josh@joshtriplett.org
+P: 4096R/8AFF873D 758E 5042 E397 4BA3 3A9C  1E67 0ED9 A3DF 8AFF 873D
+D: RCU and rcutorture
 D: lock annotations, finding and fixing lock bugs
+D: kernel tinification
 
 N: Winfried Trümper
 E: winni@xpilot.org

Documentation/ABI/stable/sysfs-bus-usb

@@ -3,13 +3,13 @@ Date:		May 2007
 KernelVersion:	2.6.23
 Contact:	Alan Stern <stern@rowland.harvard.edu>
 Description:
-		If CONFIG_USB_PERSIST is set, then each USB device directory
-		will contain a file named power/persist.  The file holds a
-		boolean value (0 or 1) indicating whether or not the
-		"USB-Persist" facility is enabled for the device.  Since the
-		facility is inherently dangerous, it is disabled by default
-		for all devices except hubs.  For more information, see
-		Documentation/usb/persist.txt.
+		USB device directories can contain a file named power/persist.
+		The file holds a boolean value (0 or 1) indicating whether or
+		not the "USB-Persist" facility is enabled for the device.  For
+		hubs this facility is always enabled and their device
+		directories will not contain this file.
+
+		For more information, see Documentation/usb/persist.txt.
 
 What:		/sys/bus/usb/devices/.../power/autosuspend
 Date:		March 2007

Documentation/ABI/testing/ima_policy

@@ -26,6 +26,7 @@ Description:
 			option:	[[appraise_type=]] [permit_directio]
 
 		base: 	func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK]
+				[FIRMWARE_CHECK]
 			mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC]
 			fsmagic:= hex value
 			fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6)
@@ -57,7 +58,8 @@ Description:
 			measure func=BPRM_CHECK
 			measure func=FILE_MMAP mask=MAY_EXEC
 			measure func=FILE_CHECK mask=MAY_READ uid=0
-			measure func=MODULE_CHECK uid=0
+			measure func=MODULE_CHECK
+			measure func=FIRMWARE_CHECK
 			appraise fowner=0
 
 		The default policy measures all executables in bprm_check,

Documentation/ABI/testing/sysfs-bus-iio

@@ -260,6 +260,10 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_magn_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_scale
 KernelVersion:	2.6.35
@@ -447,6 +451,14 @@ What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en
@@ -492,6 +504,14 @@ What:		/sys/.../iio:deviceX/events/in_magn_y_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_y_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_magn_z_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en
+What:		/sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en
 What:		/sys/.../iio:deviceX/events/in_voltageY_roc_rising_en
@@ -538,6 +558,14 @@ What:		/sys/.../events/in_magn_y_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_y_raw_thresh_falling_value
 What:		/sys/.../events/in_magn_z_raw_thresh_rising_value
 What:		/sys/.../events/in_magn_z_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_thresh_falling_value
 What:		/sys/.../events/in_voltageY_raw_thresh_rising_value
@@ -588,6 +616,18 @@ What:		/sys/.../events/in_magn_y_thresh_either_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_rising_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_falling_hysteresis
 What:		/sys/.../events/in_magn_z_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_rising_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_falling_hysteresis
 What:		/sys/.../events/in_voltageY_thresh_either_hysteresis
@@ -635,6 +675,14 @@ What:		/sys/.../events/in_magn_y_raw_roc_rising_value
 What:		/sys/.../events/in_magn_y_raw_roc_falling_value
 What:		/sys/.../events/in_magn_z_raw_roc_rising_value
 What:		/sys/.../events/in_magn_z_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_rising_value
 What:		/sys/.../events/in_voltageY_supply_raw_roc_falling_value
 What:		/sys/.../events/in_voltageY_raw_roc_rising_value
@@ -690,6 +738,22 @@ What:		/sys/.../events/in_magn_z_thresh_rising_period
 What:		/sys/.../events/in_magn_z_thresh_falling_period
 What:		/sys/.../events/in_magn_z_roc_rising_period
 What:		/sys/.../events/in_magn_z_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period
+What:		/sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period
 What:		/sys/.../events/in_voltageY_supply_thresh_rising_period
 What:		/sys/.../events/in_voltageY_supply_thresh_falling_period
 What:		/sys/.../events/in_voltageY_supply_roc_rising_period
@@ -787,6 +851,10 @@ What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_en
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en
 What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en
 What:		/sys/.../iio:deviceX/scan_elements/in_voltageY_en
@@ -853,6 +921,10 @@ What:		/sys/.../iio:deviceX/scan_elements/in_anglvel_z_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_x_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_y_index
 What:		/sys/.../iio:deviceX/scan_elements/in_magn_z_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index
+What:		/sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_x_index
 What:		/sys/.../iio:deviceX/scan_elements/in_incli_y_index
 What:		/sys/.../iio:deviceX/scan_elements/in_timestamp_index
@@ -895,6 +967,19 @@ Description:
 		on-chip EEPROM. After power-up or chip reset the device will
 		automatically load the saved configuration.
 
+What:		/sys/.../iio:deviceX/in_proximity_raw
+What:		/sys/.../iio:deviceX/in_proximity_input
+What:		/sys/.../iio:deviceX/in_proximityY_raw
+KernelVersion:	3.4
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Proximity measurement indicating that some
+		object is near the sensor, usually be observing
+		reflectivity of infrared or ultrasound emitted.
+		Often these sensors are unit less and as such conversion
+		to SI units is not possible.  Where it is, the units should
+		be meters.
+
 What:		/sys/.../iio:deviceX/in_illuminanceY_input
 What:		/sys/.../iio:deviceX/in_illuminanceY_raw
 What:		/sys/.../iio:deviceX/in_illuminanceY_mean_raw
@@ -933,3 +1018,13 @@ Description:
 		x y z w. Here x, y, and z component represents the axis about
 		which a rotation will occur and w component represents the
 		amount of rotation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw
+KernelVersion:	3.15
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Raw value of rotation from true/magnetic north measured with
+		or without compensation from tilt sensors.

Documentation/ABI/testing/sysfs-bus-platform

@@ -0,0 +1,20 @@
+What:		/sys/bus/platform/devices/.../driver_override
+Date:		April 2014
+Contact:	Kim Phillips <kim.phillips@freescale.com>
+Description:
+		This file allows the driver for a device to be specified which
+		will override standard OF, ACPI, ID table, and name matching.
+		When specified, only a driver with a name matching the value
+		written to driver_override will have an opportunity to bind
+		to the device.  The override is specified by writing a string
+		to the driver_override file (echo vfio-platform > \
+		driver_override) and may be cleared with an empty string
+		(echo > driver_override).  This returns the device to standard
+		matching rules binding.  Writing to driver_override does not
+		automatically unbind the device from its current driver or make
+		any attempt to automatically load the specified driver.  If no
+		driver with a matching name is currently loaded in the kernel,
+		the device will not bind to any driver.  This also allows
+		devices to opt-out of driver binding using a driver_override
+		name such as "none".  Only a single driver may be specified in
+		the override, there is no support for parsing delimiters.

Documentation/ABI/testing/sysfs-bus-rbd

@@ -94,5 +94,5 @@ current_snap
 
 parent
 
-	Information identifying the pool, image, and snapshot id for
-	the parent image in a layered rbd image (format 2 only).
+	Information identifying the chain of parent images in a layered rbd
+	image.  Entries are separated by empty lines.

Documentation/ABI/testing/sysfs-bus-usb-lvstest

@@ -0,0 +1,47 @@
+Link Layer Validation Device is a standard device for testing of Super
+Speed Link Layer tests. These nodes are available in sysfs only when lvs
+driver is bound with root hub device.
+
+What:		/sys/bus/usb/devices/.../get_dev_desc
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Write to this node to issue "Get Device Descriptor"
+		for Link Layer Validation device. It is needed for TD.7.06.
+
+What:		/sys/bus/usb/devices/.../u1_timeout
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Set "U1 timeout" for the downstream port where Link Layer
+		Validation device is connected. Timeout value must be between 0
+		and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21.
+
+What:		/sys/bus/usb/devices/.../u2_timeout
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Set "U2 timeout" for the downstream port where Link Layer
+		Validation device is connected. Timeout value must be between 0
+		and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21.
+
+What:		/sys/bus/usb/devices/.../hot_reset
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Write to this node to issue "Reset" for Link Layer Validation
+		device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35.
+
+What:		/sys/bus/usb/devices/.../u3_entry
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Write to this node to issue "U3 entry" for Link Layer
+		Validation device. It is needed for TD.7.35 and TD.7.36.
+
+What:		/sys/bus/usb/devices/.../u3_exit
+Date:		March 2014
+Contact:	Pratyush Anand <pratyush.anand@st.com>
+Description:
+		Write to this node to issue "U3 exit" for Link Layer
+		Validation device. It is needed for TD.7.36.

Documentation/ABI/testing/sysfs-class-iommu

@@ -0,0 +1,17 @@
+What:		/sys/class/iommu/<iommu>/devices/
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU drivers are able to link devices managed by a
+		given IOMMU here to allow association of IOMMU to
+		device.
+
+What:		/sys/devices/.../iommu
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU drivers are able to link the IOMMU for a
+		given device here to allow association of device to
+		IOMMU.

Documentation/ABI/testing/sysfs-class-iommu-amd-iommu

@@ -0,0 +1,14 @@
+What:		/sys/class/iommu/<iommu>/amd-iommu/cap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		IOMMU capability header as documented in the AMD IOMMU
+		specification.  Format: %x
+
+What:		/sys/class/iommu/<iommu>/amd-iommu/features
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		Extended features of the IOMMU.  Format: %llx

Documentation/ABI/testing/sysfs-class-iommu-intel-iommu

@@ -0,0 +1,32 @@
+What:		/sys/class/iommu/<iommu>/intel-iommu/address
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		Physical address of the VT-d DRHD for this IOMMU.
+		Format: %llx.  This allows association of a sysfs
+		intel-iommu with a DMAR DRHD table entry.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/cap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The cached hardware capability register value
+		of this DRHD unit.  Format: %llx.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/ecap
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The cached hardware extended capability register
+		value of this DRHD unit.  Format: %llx.
+
+What:		/sys/class/iommu/<iommu>/intel-iommu/version
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	Alex Williamson <alex.williamson@redhat.com>
+Description:
+		The architecture version as reported from the
+		VT-d VER_REG.  Format: %d:%d, major:minor

Documentation/ABI/testing/sysfs-class-leds-gt683r

@@ -0,0 +1,16 @@
+What:		/sys/class/leds/<led>/gt683r/mode
+Date:		Jun 2014
+KernelVersion:	3.17
+Contact:	Janne Kanniainen <janne.kanniainen@gmail.com>
+Description:
+		Set the mode of LEDs. You should notice that changing the mode
+		of one LED will update the mode of its two sibling devices as
+		well.
+
+		0 - normal
+		1 - audio
+		2 - breathing
+
+		Normal: LEDs are fully on when enabled
+		Audio:  LEDs brightness depends on sound level
+		Breathing: LEDs brightness varies at human breathing rate

Documentation/ABI/testing/sysfs-class-mei

@@ -0,0 +1,16 @@
+What:		/sys/class/mei/
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:
+		The mei/ class sub-directory belongs to mei device class
+
+
+What:		/sys/class/mei/meiN/
+Date:		May 2014
+KernelVersion:	3.17
+Contact:	Tomas Winkler <tomas.winkler@intel.com>
+Description:
+		The /sys/class/mei/meiN directory is created for
+		each probed mei device
+

Documentation/ABI/testing/sysfs-class-mtd

@@ -184,3 +184,41 @@ Description:
 
 		It will always be a non-negative integer.  In the case of
 		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/ecc_failures
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of failures reported by this device's ECC. Typically,
+		these failures are associated with failed read operations.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/corrected_bits
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of bits that have been corrected by means of the
+		device's ECC.
+
+		It will always be a non-negative integer.  In the case of
+		devices lacking any ECC capability, it is 0.
+
+What:		/sys/class/mtd/mtdX/bad_blocks
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of blocks marked as bad, if any, in this partition.
+
+What:		/sys/class/mtd/mtdX/bbt_blocks
+Date:		June 2014
+KernelVersion:	3.17
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		The number of blocks that are marked as reserved, if any, in
+		this partition. These are typically used to store the in-flash
+		bad block table (BBT).

Documentation/ABI/testing/sysfs-class-net

@@ -1,3 +1,14 @@
+What:		/sys/class/net/<iface>/name_assign_type
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	netdev@vger.kernel.org
+Description:
+		Indicates the name assignment type. Possible values are:
+		1: enumerated by the kernel, possibly in an unpredictable way
+		2: predictably named by the kernel
+		3: named by userspace
+		4: renamed
+
 What:		/sys/class/net/<iface>/addr_assign_type
 Date:		July 2010
 KernelVersion:	3.2

Documentation/ABI/testing/sysfs-driver-genwqe

@@ -25,6 +25,15 @@ Date:           Oct 2013
 Contact:        haver@linux.vnet.ibm.com
 Description:    Interface to set the next bitstream to be used.
 
+What:           /sys/class/genwqe/genwqe<n>_card/reload_bitstream
+Date:           May 2014
+Contact:        klebers@linux.vnet.ibm.com
+Description:    Interface to trigger a PCIe card reset to reload the bitstream.
+                  sudo sh -c 'echo 1 > \
+                    /sys/class/genwqe/genwqe0_card/reload_bitstream'
+                If successfully, the card will come back with the bitstream set
+                on 'next_bitstream'.
+
 What:           /sys/class/genwqe/genwqe<n>_card/tempsens
 Date:           Oct 2013
 Contact:        haver@linux.vnet.ibm.com

Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd → Documentation/ABI/testing/sysfs-driver-hid-lenovo

@@ -4,18 +4,21 @@ Contact:	linux-input@vger.kernel.org
 Description:	This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be
 		is being controlled by press_speed.
 		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/dragging
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled.
 		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/release_to_select
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html
 		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/select_right
 Date:		July 2011
@@ -23,16 +26,25 @@ Contact:	linux-input@vger.kernel.org
 Description:	This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate
 		a left or right mouse button click.
 		Values are 0 or 1.
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/sensitivity
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	This file contains the trackpoint sensitivity.
 		Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity).
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/press_speed
 Date:		July 2011
 Contact:	linux-input@vger.kernel.org
 Description:	This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled.
 		Values are decimal integers from 1 (slowest) to 255 (fastest).
+		Applies to Thinkpad USB Keyboard with TrackPoint.
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/fn_lock
+Date:		July 2014
+Contact:	linux-input@vger.kernel.org
+Description:	This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1)
+		Values are 0 or 1
+		Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint.

Documentation/ABI/testing/sysfs-driver-pciback

@@ -0,0 +1,13 @@
+What:           /sys/bus/pci/drivers/pciback/quirks
+Date:           Oct 2011
+KernelVersion:  3.1
+Contact:        xen-devel@lists.xenproject.org
+Description:
+                If the permissive attribute is set, then writing a string in
+                the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest
+                to write and read from the PCI device. That is Domain:Bus:
+                Device.Function-Register:Size:Mask (Domain is optional).
+                For example:
+                #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks
+                will allow the guest to read and write to the configuration
+                register 0x0E.

Documentation/ABI/testing/sysfs-driver-tegra-fuse

@@ -0,0 +1,11 @@
+What:		/sys/devices/*/<our-device>/fuse
+Date:		February 2014
+Contact:	Peter De Schrijver <pdeschrijver@nvidia.com>
+Description:	read-only access to the efuses on Tegra20, Tegra30, Tegra114
+		and Tegra124 SoC's from NVIDIA. The efuses contain write once
+		data programmed at the factory. The data is layed out in 32bit
+		words in LSB first format. Each bit represents a single value
+		as decoded from the fuse registers. Bits order/assignment
+		exactly matches the HW registers, including any unused bits.
+Users:		any user space application which wants to read the efuses on
+		Tegra SoC's

Documentation/ABI/testing/sysfs-driver-wacom

@@ -1,48 +1,27 @@
-WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
-Date:		June 2012
-Contact:	linux-bluetooth@vger.kernel.org
-Description:
-		The /sys/class/hidraw/hidraw*/device/oled*_img files control
-		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
-		has to contain 256 bytes (64x32 px 1 bit colour). The format
-		is the same as PBM image 62x32px without header (64 bits per
-		horizontal line, 32 lines). An example of setting OLED No. 0:
-		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
-		The attribute is read only and no local copy of the image is
-		stored.
-
-What:		/sys/class/hidraw/hidraw*/device/speed
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed
 Date:		April 2010
 Kernel Version:	2.6.35
 Contact:	linux-bluetooth@vger.kernel.org
 Description:
-		The /sys/class/hidraw/hidraw*/device/speed file controls
-		reporting speed of Wacom bluetooth tablet. Reading from
-		this file returns 1 if tablet reports in high speed mode
+		The /sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/speed file
+		controls reporting speed of Wacom bluetooth tablet. Reading
+		from this file returns 1 if tablet reports in high speed mode
 		or 0 otherwise. Writing to this file one of these values
 		switches reporting speed.
 
-What:		/sys/class/leds/0005\:056A\:00BD.0001\:selector\:*/
-Date:		May 2012
-Kernel Version:	3.5
-Contact:	linux-bluetooth@vger.kernel.org
-Description:
-		LED selector for Intuos4 WL. There are 4 leds, but only one LED
-		can be lit at a time. Max brightness is 127.
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/led
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Attribute group for control of the status LEDs and the OLEDs.
 		This attribute group is only available for Intuos 4 M, L,
-		and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq
-		21UX2 and Cintiq 24HD (LEDs only). Therefore its presence
-		implicitly signifies the presence of said LEDs and OLEDs on the
-		tablet device.
+		and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only),
+		Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD
+		(LEDs only). Therefore its presence implicitly signifies the
+		presence of said LEDs and OLEDs on the tablet device.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status0_luminance
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets the status LED luminance (1..127)
@@ -50,16 +29,16 @@ Description:
 		button is pressed on the stylus. This luminance level is
 		normally lower than the level when a button is pressed.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status1_luminance
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets the status LED luminance (1..127)
 		when the stylus touches the tablet surface, or any button is
 		pressed on the stylus.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led0_select
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets which one of the four (for Intuos 4
@@ -67,23 +46,23 @@ Description:
 		24HD) status LEDs is active (0..3). The other three LEDs on the
 		same side are always inactive.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
-Date:		September 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/status_led1_select
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets which one of the left four (for Cintiq 21UX2
 		and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on
 		the left are always inactive.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/buttons_luminance
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		Writing to this file sets the overall luminance level (0..15)
 		of all eight button OLED displays.
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
-Date:		August 2011
+What:		/sys/bus/hid/devices/<bus>:<vid>:<pid>.<n>/wacom_led/button<n>_rawimg
+Date:		August 2014
 Contact:	linux-input@vger.kernel.org
 Description:
 		When writing a 1024 byte raw image in Wacom Intuos 4
@@ -93,3 +72,8 @@ Description:
 		byte chunk encodes the image data for two consecutive lines on
 		the display. The low nibble of each byte contains the first
 		line, and the high nibble contains the second line.
+		When the Wacom Intuos 4 is connected over Bluetooth, the
+		image has to contain 256 bytes (64x32 px 1 bit colour).
+		The format is also scrambled, like in the USB mode, and it can
+		be summarized by converting 76543210 into GECA6420.
+					    HGFEDCBA      HFDB7531

Documentation/ABI/testing/sysfs-fs-nilfs2

@@ -0,0 +1,269 @@
+
+What:		/sys/fs/nilfs2/features/revision
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show current revision of NILFS file system driver.
+		This value informs about file system revision that
+		driver is ready to support.
+
+What:		/sys/fs/nilfs2/features/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/features group.
+
+What:		/sys/fs/nilfs2/<device>/revision
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show NILFS file system revision on volume.
+		This value informs about metadata structures'
+		revision on mounted volume.
+
+What:		/sys/fs/nilfs2/<device>/blocksize
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's block size in bytes.
+
+What:		/sys/fs/nilfs2/<device>/device_size
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume size in bytes.
+
+What:		/sys/fs/nilfs2/<device>/free_blocks
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of free blocks on volume.
+
+What:		/sys/fs/nilfs2/<device>/uuid
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's UUID (Universally Unique Identifier).
+
+What:		/sys/fs/nilfs2/<device>/volume_name
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show volume's label.
+
+What:		/sys/fs/nilfs2/<device>/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device> group.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show last write time of super block in human-readable
+		format.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show last write time of super block in seconds.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_write_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show current write count of super block.
+
+What:		/sys/fs/nilfs2/<device>/superblock/sb_update_frequency
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show/Set interval of periodical update of superblock
+		(in seconds).
+
+What:		/sys/fs/nilfs2/<device>/superblock/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/superblock
+		group.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_pseg_block
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show start block number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_sequence
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show sequence value of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show checkpoint number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/current_seg_sequence
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show segment sequence counter.
+
+What:		/sys/fs/nilfs2/<device>/segctor/current_last_full_seg
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show index number of the latest full segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_full_seg
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show index number of the full segment index
+		to be used next.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_pseg_offset
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show offset of next partial segment in the current
+		full segment.
+
+What:		/sys/fs/nilfs2/<device>/segctor/next_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show next checkpoint number.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment in
+		human-readable format.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_seg_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment in seconds.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_nongc_write_time
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment not for cleaner
+		operation in human-readable format.
+
+What:		/sys/fs/nilfs2/<device>/segctor/last_nongc_write_time_secs
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show write time of the last segment not for cleaner
+		operation in seconds.
+
+What:		/sys/fs/nilfs2/<device>/segctor/dirty_data_blocks_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of dirty data blocks.
+
+What:		/sys/fs/nilfs2/<device>/segctor/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/segctor
+		group.
+
+What:		/sys/fs/nilfs2/<device>/segments/segments_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of segments on a volume.
+
+What:		/sys/fs/nilfs2/<device>/segments/blocks_per_segment
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of blocks in segment.
+
+What:		/sys/fs/nilfs2/<device>/segments/clean_segments
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of clean segments.
+
+What:		/sys/fs/nilfs2/<device>/segments/dirty_segments
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show count of dirty segments.
+
+What:		/sys/fs/nilfs2/<device>/segments/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/segments
+		group.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/checkpoints_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of checkpoints on volume.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/snapshots_number
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of snapshots on volume.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/last_seg_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show checkpoint number of the latest segment.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/next_checkpoint
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show next checkpoint number.
+
+What:		/sys/fs/nilfs2/<device>/checkpoints/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/checkpoints
+		group.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe content of /sys/fs/nilfs2/<device>/mounted_snapshots
+		group.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/inodes_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of inodes for snapshot.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/blocks_count
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Show number of blocks for snapshot.
+
+What:		/sys/fs/nilfs2/<device>/mounted_snapshots/<id>/README
+Date:		April 2014
+Contact:	"Vyacheslav Dubeyko" <slava@dubeyko.com>
+Description:
+		Describe attributes of /sys/fs/nilfs2/<device>/mounted_snapshots/<id>
+		group.

Documentation/ABI/testing/sysfs-fs-xfs

@@ -0,0 +1,39 @@
+What:		/sys/fs/xfs/<disk>/log/log_head_lsn
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The log sequence number (LSN) of the current head of the
+		log. The LSN is exported in "cycle:basic block" format.
+Users:		xfstests
+
+What:		/sys/fs/xfs/<disk>/log/log_tail_lsn
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The log sequence number (LSN) of the current tail of the
+		log. The LSN is exported in "cycle:basic block" format.
+
+What:		/sys/fs/xfs/<disk>/log/reserve_grant_head
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The current state of the log reserve grant head. It
+		represents the total log reservation of all currently
+		outstanding transactions. The grant head is exported in
+		"cycle:bytes" format.
+Users:		xfstests
+
+What:		/sys/fs/xfs/<disk>/log/write_grant_head
+Date:		July 2014
+KernelVersion:	3.17
+Contact:	xfs@oss.sgi.com
+Description:
+		The current state of the log write grant head. It
+		represents the total log reservation of all currently
+		oustanding transactions, including regrants due to
+		rolling transactions. The grant head is exported in
+		"cycle:bytes" format.
+Users:		xfstests

Documentation/ABI/testing/sysfs-platform-ts5500

@@ -30,6 +30,13 @@ Description:
 		the corresponding bit is set. For instance, 0x0e means jumpers
 		2, 3 and 4 are set.
 
+What:		/sys/devices/platform/ts5500/name
+Date:		July 2014
+KernelVersion:	3.16
+Contact:	"Savoir-faire Linux Inc." <kernel@savoirfairelinux.com>
+Description:
+		Model name of the TS board, e.g. "TS-5500".
+
 What:		/sys/devices/platform/ts5500/rs485
 Date:		January 2013
 KernelVersion:	3.7

Documentation/ABI/testing/sysfs-tty

@@ -138,3 +138,19 @@ Description:
 
 		 These sysfs values expose the TIOCGSERIAL interface via
 		 sysfs rather than via ioctls.
+
+What:		/sys/class/tty/ttyS0/rx_trig_bytes
+Date:		May 2014
+Contact:	Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
+Description:
+		 Shows current RX interrupt trigger bytes or sets the
+		 user specified value to change it for the FIFO buffer.
+		 Users can show or set this value regardless of opening the
+		 serial device file or not.
+
+		 The RX trigger can be set one of four kinds of values for UART
+		 serials. When users input a meaning less value to this I/F,
+		 the RX trigger is changed to the nearest lower value for the
+		 device specification. For example, when user sets 7bytes on
+		 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is
+		 automatically changed to 4 bytes.

Documentation/DocBook/device-drivers.tmpl

@@ -54,7 +54,7 @@
 !Ikernel/sched/cpupri.c
 !Ikernel/sched/fair.c
 !Iinclude/linux/completion.h
-!Ekernel/timer.c
+!Ekernel/time/timer.c
      </sect1>
      <sect1><title>Wait queues and Wake events</title>
 !Iinclude/linux/wait.h
@@ -63,7 +63,7 @@
      <sect1><title>High-resolution timers</title>
 !Iinclude/linux/ktime.h
 !Iinclude/linux/hrtimer.h
-!Ekernel/hrtimer.c
+!Ekernel/time/hrtimer.c
      </sect1>
      <sect1><title>Workqueues and Kevents</title>
 !Ekernel/workqueue.c
@@ -128,8 +128,12 @@ X!Edrivers/base/interface.c
 !Edrivers/base/bus.c
      </sect1>
      <sect1><title>Device Drivers DMA Management</title>
-!Edrivers/base/dma-buf.c
-!Edrivers/base/reservation.c
+!Edrivers/dma-buf/dma-buf.c
+!Edrivers/dma-buf/fence.c
+!Edrivers/dma-buf/seqno-fence.c
+!Iinclude/linux/fence.h
+!Iinclude/linux/seqno-fence.h
+!Edrivers/dma-buf/reservation.c
 !Iinclude/linux/reservation.h
 !Edrivers/base/dma-coherent.c
 !Edrivers/base/dma-mapping.c

Documentation/DocBook/drm.tmpl

@@ -315,7 +315,7 @@ char *date;</synopsis>
         <function>drm_dev_unregister()</function> followed by a call to
         <function>drm_dev_unref()</function>.
       </para>
-!Edrivers/gpu/drm/drm_stub.c
+!Edrivers/gpu/drm/drm_drv.c
     </sect2>
     <sect2>
       <title>Driver Load</title>
@@ -1610,7 +1610,7 @@ int max_width, max_height;</synopsis>
           The connector is then registered with a call to
           <function>drm_connector_init</function> with a pointer to the connector
           functions and a connector type, and exposed through sysfs with a call to
-          <function>drm_sysfs_connector_add</function>.
+          <function>drm_connector_register</function>.
         </para>
         <para>
           Supported connector types are
@@ -1768,7 +1768,7 @@ int max_width, max_height;</synopsis>
 	(<function>drm_encoder_cleanup</function>) and connectors
 	(<function>drm_connector_cleanup</function>). Furthermore, connectors
 	that have been added to sysfs must be removed by a call to
-	<function>drm_sysfs_connector_remove</function> before calling
+	<function>drm_connector_unregister</function> before calling
 	<function>drm_connector_cleanup</function>.
       </para>
       <para>
@@ -1813,7 +1813,7 @@ void intel_crt_init(struct drm_device *dev)
 	drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs);
 	drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
 
-	drm_sysfs_connector_add(connector);
+	drm_connector_register(connector);
 }]]></programlisting>
       <para>
         In the example above (taken from the i915 driver), a CRTC, connector and
@@ -2336,6 +2336,12 @@ void intel_crt_init(struct drm_device *dev)
 !Pdrivers/gpu/drm/drm_dp_helper.c dp helpers
 !Iinclude/drm/drm_dp_helper.h
 !Edrivers/gpu/drm/drm_dp_helper.c
+    </sect2>
+    <sect2>
+      <title>Display Port MST Helper Functions Reference</title>
+!Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper
+!Iinclude/drm/drm_dp_mst_helper.h
+!Edrivers/gpu/drm/drm_dp_mst_topology.c
     </sect2>
     <sect2>
       <title>EDID Helper Functions Reference</title>
@@ -2502,7 +2508,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >Description/Restrictions</td>
 	</tr>
 	<tr>
-	<td rowspan="20" valign="top" >DRM</td>
+	<td rowspan="21" valign="top" >DRM</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >“EDID”</td>
 	<td valign="top" >BLOB | IMMUTABLE</td>
@@ -2633,7 +2639,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >Optional</td>
+	<td rowspan="3" valign="top" >Optional</td>
 	<td valign="top" >“scaling mode”</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "None", "Full", "Center", "Full aspect" }</td>
@@ -2641,6 +2647,15 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
+	<td valign="top" >"aspect ratio"</td>
+	<td valign="top" >ENUM</td>
+	<td valign="top" >{ "None", "4:3", "16:9" }</td>
+	<td valign="top" >Connector</td>
+	<td valign="top" >DRM property to set aspect ratio from user space app.
+		This enum is made generic to allow addition of custom aspect
+		ratios.</td>
+	</tr>
+	<tr>
 	<td valign="top" >“dirty”</td>
 	<td valign="top" >ENUM | IMMUTABLE</td>
 	<td valign="top" >{ "Off", "On", "Annotate" }</td>
@@ -2649,7 +2664,7 @@ void intel_crt_init(struct drm_device *dev)
 	</tr>
 	<tr>
 	<td rowspan="21" valign="top" >i915</td>
-	<td rowspan="3" valign="top" >Generic</td>
+	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "Automatic", "Full", "Limited 16:235" }</td>
@@ -2664,10 +2679,11 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
+	<td rowspan="1" valign="top" >Plane</td>
+	<td valign="top" >“rotation”</td>
+	<td valign="top" >BITMASK</td>
+	<td valign="top" >{ 0, "rotate-0" }, { 2, "rotate-180" }</td>
+	<td valign="top" >Plane</td>
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
@@ -2799,8 +2815,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="3" valign="top" >CDV gma-500</td>
-	<td rowspan="3" valign="top" >Generic</td>
+	<td rowspan="2" valign="top" >CDV gma-500</td>
+	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >"Broadcast RGB"</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ “Full”, “Limited 16:235” }</td>
@@ -2815,15 +2831,8 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
-	<td rowspan="20" valign="top" >Poulsbo</td>
-	<td rowspan="2" valign="top" >Generic</td>
+	<td rowspan="19" valign="top" >Poulsbo</td>
+	<td rowspan="1" valign="top" >Generic</td>
 	<td valign="top" >“backlight”</td>
 	<td valign="top" >RANGE</td>
 	<td valign="top" >Min=0, Max=100</td>
@@ -2831,13 +2840,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="17" valign="top" >SDVO-TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
@@ -3064,7 +3066,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="3" valign="top" >i2c/ch7006_drv</td>
+	<td rowspan="2" valign="top" >i2c/ch7006_drv</td>
 	<td valign="top" >Generic</td>
 	<td valign="top" >“scale”</td>
 	<td valign="top" >RANGE</td>
@@ -3073,14 +3075,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="2" valign="top" >TV</td>
-	<td valign="top" >Standard names as in DRM</td>
-	<td valign="top" >Standard types as in DRM</td>
-	<td valign="top" >Standard Values as in DRM</td>
-	<td valign="top" >Standard object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
+	<td rowspan="1" valign="top" >TV</td>
 	<td valign="top" >“mode”</td>
 	<td valign="top" >ENUM</td>
 	<td valign="top" >{ "PAL", "PAL-M","PAL-N"}, ”PAL-Nc"
@@ -3089,7 +3084,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="16" valign="top" >nouveau</td>
+	<td rowspan="15" valign="top" >nouveau</td>
 	<td rowspan="6" valign="top" >NV10 Overlay</td>
 	<td valign="top" >"colorkey"</td>
 	<td valign="top" >RANGE</td>
@@ -3198,14 +3193,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Generic</td>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="2" valign="top" >omap</td>
 	<td rowspan="2" valign="top" >Generic</td>
 	<td valign="top" >“rotation”</td>
@@ -3236,7 +3223,7 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td rowspan="10" valign="top" >radeon</td>
+	<td rowspan="9" valign="top" >radeon</td>
 	<td valign="top" >DVI-I</td>
 	<td valign="top" >“coherent”</td>
 	<td valign="top" >RANGE</td>
@@ -3308,14 +3295,6 @@ void intel_crt_init(struct drm_device *dev)
 	<td valign="top" >TBD</td>
 	</tr>
 	<tr>
-	<td valign="top" >Generic</td>
-	<td valign="top" >Standard name as in DRM</td>
-	<td valign="top" >Standard type as in DRM</td>
-	<td valign="top" >Standard value as in DRM</td>
-	<td valign="top" >Standard Object as in DRM</td>
-	<td valign="top" >TBD</td>
-	</tr>
-	<tr>
 	<td rowspan="3" valign="top" >rcar-du</td>
 	<td rowspan="3" valign="top" >Generic</td>
 	<td valign="top" >"alpha"</td>

Documentation/DocBook/gadget.tmpl

@@ -556,11 +556,11 @@ been converted to this framework.
 Near-term plans include converting all of them, except for "gadgetfs".
 </para>
 
-!Edrivers/usb/gadget/f_acm.c
-!Edrivers/usb/gadget/f_ecm.c
-!Edrivers/usb/gadget/f_subset.c
-!Edrivers/usb/gadget/f_obex.c
-!Edrivers/usb/gadget/f_serial.c
+!Edrivers/usb/gadget/function/f_acm.c
+!Edrivers/usb/gadget/function/f_ecm.c
+!Edrivers/usb/gadget/function/f_subset.c
+!Edrivers/usb/gadget/function/f_obex.c
+!Edrivers/usb/gadget/function/f_serial.c
 
 </sect1>
 

Documentation/PCI/MSI-HOWTO.txt

@@ -576,7 +576,7 @@ Some devices are known to have faulty MSI implementations.  Usually this
 is handled in the individual device driver, but occasionally it's necessary
 to handle this with a quirk.  Some drivers have an option to disable use
 of MSI.  While this is a convenient workaround for the driver author,
-it is not good practise, and should not be emulated.
+it is not good practice, and should not be emulated.
 
 5.4. Finding why MSIs are disabled on a device
 

Documentation/RCU/RTFP.txt

@@ -2451,8 +2451,8 @@ lot of {Linux} into your technology!!!"
 ,month="February"
 ,year="2010"
 ,note="Available:
-\url{http://kerneltrap.com/mailarchive/linux-netdev/2010/2/26/6270589}
-[Viewed March 20, 2011]"
+\url{http://thread.gmane.org/gmane.linux.network/153338}
+[Viewed June 9, 2014]"
 ,annotation={
 	Use a pair of list_head structures to support RCU-protected
 	resizable hash tables.

Documentation/RCU/rcuref.txt

@@ -1,5 +1,14 @@
 Reference-count design for elements of lists/arrays protected by RCU.
 
+
+Please note that the percpu-ref feature is likely your first
+stop if you need to combine reference counts and RCU.  Please see
+include/linux/percpu-refcount.h for more information.  However, in
+those unusual cases where percpu-ref would consume too much memory,
+please read on.
+
+------------------------------------------------------------------------
+
 Reference counting on elements of lists which are protected by traditional
 reader/writer spinlocks or semaphores are straightforward:
 

Documentation/RCU/whatisRCU.txt

@@ -818,7 +818,7 @@ RCU pointer/list update:
 	list_add_tail_rcu
 	list_del_rcu
 	list_replace_rcu
-	hlist_add_after_rcu
+	hlist_add_behind_rcu
 	hlist_add_before_rcu
 	hlist_add_head_rcu
 	hlist_del_rcu

Documentation/SubmittingDrivers

@@ -146,10 +146,6 @@ LWN.net:
 	Porting drivers from prior kernels to 2.6:
 		http://lwn.net/Articles/driver-porting/
 
-KernelTrap:
-	Occasional Linux kernel articles and developer interviews
-	http://kerneltrap.org/
-
 KernelNewbies:
 	Documentation and assistance for new kernel programmers
 	http://kernelnewbies.org/

Documentation/SubmittingPatches

@@ -84,18 +84,42 @@ is another popular alternative.
 
 2) Describe your changes.
 
-Describe the technical detail of the change(s) your patch includes.
-
-Be as specific as possible.  The WORST descriptions possible include
-things like "update driver X", "bug fix for driver X", or "this patch
-includes updates for subsystem X.  Please apply."
+Describe your problem.  Whether your patch is a one-line bug fix or
+5000 lines of a new feature, there must be an underlying problem that
+motivated you to do this work.  Convince the reviewer that there is a
+problem worth fixing and that it makes sense for them to read past the
+first paragraph.
+
+Describe user-visible impact.  Straight up crashes and lockups are
+pretty convincing, but not all bugs are that blatant.  Even if the
+problem was spotted during code review, describe the impact you think
+it can have on users.  Keep in mind that the majority of Linux
+installations run kernels from secondary stable trees or
+vendor/product-specific trees that cherry-pick only specific patches
+from upstream, so include anything that could help route your change
+downstream: provoking circumstances, excerpts from dmesg, crash
+descriptions, performance regressions, latency spikes, lockups, etc.
+
+Quantify optimizations and trade-offs.  If you claim improvements in
+performance, memory consumption, stack footprint, or binary size,
+include numbers that back them up.  But also describe non-obvious
+costs.  Optimizations usually aren't free but trade-offs between CPU,
+memory, and readability; or, when it comes to heuristics, between
+different workloads.  Describe the expected downsides of your
+optimization so that the reviewer can weigh costs against benefits.
+
+Once the problem is established, describe what you are actually doing
+about it in technical detail.  It's important to describe the change
+in plain English for the reviewer to verify that the code is behaving
+as you intend it to.
 
 The maintainer will thank you if you write your patch description in a
 form which can be easily pulled into Linux's source code management
 system, git, as a "commit log".  See #15, below.
 
-If your description starts to get long, that's a sign that you probably
-need to split up your patch.  See #3, next.
+Solve only one problem per patch.  If your description starts to get
+long, that's a sign that you probably need to split up your patch.
+See #3, next.
 
 When you submit or resubmit a patch or patch series, include the
 complete patch description and justification for it.  Don't just
@@ -396,13 +420,13 @@ you are responsible for last-minute changes. Example :
 	[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
 	Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
 
-This practise is particularly helpful if you maintain a stable branch and
+This practice is particularly helpful if you maintain a stable branch and
 want at the same time to credit the author, track changes, merge the fix,
 and protect the submitter from complaints. Note that under no circumstances
 can you change the author's identity (the From header), as it is the one
 which appears in the changelog.
 
-Special note to back-porters: It seems to be a common and useful practise
+Special note to back-porters: It seems to be a common and useful practice
 to insert an indication of the origin of a patch at the top of the commit
 message (just after the subject line) to facilitate tracking. For instance,
 here's what we see in 2.6-stable :

Documentation/arm/CCN.txt

@@ -0,0 +1,52 @@
+ARM Cache Coherent Network
+==========================
+
+CCN-504 is a ring-bus interconnect consisting of 11 crosspoints
+(XPs), with each crosspoint supporting up to two device ports,
+so nodes (devices) 0 and 1 are connected to crosspoint 0,
+nodes 2 and 3 to crosspoint 1 etc.
+
+PMU (perf) driver
+-----------------
+
+The CCN driver registers a perf PMU driver, which provides
+description of available events and configuration options
+in sysfs, see /sys/bus/event_source/devices/ccn*.
+
+The "format" directory describes format of the config, config1
+and config2 fields of the perf_event_attr structure. The "events"
+directory provides configuration templates for all documented
+events, that can be used with perf tool. For example "xp_valid_flit"
+is an equivalent of "type=0x8,event=0x4". Other parameters must be
+explicitly specified. For events originating from device, "node"
+defines its index. All crosspoint events require "xp" (index),
+"port" (device port number) and "vc" (virtual channel ID) and
+"dir" (direction). Watchpoints (special "event" value 0xfe) also
+require comparator values ("cmp_l" and "cmp_h") and "mask", being
+index of the comparator mask.
+
+Masks are defined separately from the event description
+(due to limited number of the config values) in the "cmp_mask"
+directory, with first 8 configurable by user and additional
+4 hardcoded for the most frequent use cases.
+
+Cycle counter is described by a "type" value 0xff and does
+not require any other settings.
+
+Example of perf tool use:
+
+/ # perf list | grep ccn
+  ccn/cycles/                                        [Kernel PMU event]
+<...>
+  ccn/xp_valid_flit/                                 [Kernel PMU event]
+<...>
+
+/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \
+                                                                       sleep 1
+
+The driver does not support sampling, therefore "perf record" will
+not work. Also notice that only single cpu is being selected
+("-C 0") - this is because perf framework does not support
+"non-CPU related" counters (yet?) so system-wide session ("-a")
+would try (and in most cases fail) to set up the same event
+per each CPU.

Documentation/arm/Marvell/README

@@ -53,8 +53,8 @@ Kirkwood family
                 Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf
   Homepage: http://www.marvell.com/embedded-processors/kirkwood/
   Core: Feroceon ARMv5 compatible
-  Linux kernel mach directory: arch/arm/mach-kirkwood
-  Linux kernel plat directory: arch/arm/plat-orion
+  Linux kernel mach directory: arch/arm/mach-mvebu
+  Linux kernel plat directory: none
 
 Discovery family
 ----------------
@@ -83,7 +83,9 @@ EBU Armada family
         88F6710
         88F6707
         88F6W11
-    Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+    Product Brief:   http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf
+    Hardware Spec:   http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf
+    Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf
 
   Armada 375 Flavors:
 	88F6720
@@ -100,8 +102,7 @@ EBU Armada family
         MV78460
     NOTE: not to be confused with the non-SMP 78xx0 SoCs
     Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf
-
-  No public datasheet available.
+    Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf
 
   Core: Sheeva ARMv7 compatible
 
@@ -135,7 +136,9 @@ Dove family (application processor)
                 Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf
   Homepage: http://www.marvell.com/application-processors/armada-500/
   Core: ARMv7 compatible
-  Directory: arch/arm/mach-dove
+
+  Directory: arch/arm/mach-mvebu (DT enabled platforms)
+             arch/arm/mach-dove (non-DT enabled platforms)
 
 PXA 2xx/3xx/93x/95x family
 --------------------------
@@ -253,10 +256,10 @@ Berlin family (Digital Entertainment)
 Long-term plans
 ---------------
 
- * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and
-   mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the
-   Marvell EBU (Engineering Business Unit) in a single mach-<foo>
-   directory. The plat-orion/ would therefore disappear.
+ * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the
+   mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering
+   Business Unit) in a single mach-<foo> directory. The plat-orion/
+   would therefore disappear.
 
  * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa
    directory. The plat-pxa/ would therefore disappear.

Documentation/arm/Samsung/Overview.txt

@@ -13,8 +13,6 @@ Introduction
 
   - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list
   - S3C64XX: S3C6400 and S3C6410
-  - S5P6440
-  - S5PC100
   - S5PC110 / S5PV210
 
 
@@ -34,8 +32,6 @@ Configuration
   A number of configurations are supplied, as there is no current way of
   unifying all the SoCs into one kernel.
 
-  s5p6440_defconfig - S5P6440 specific default configuration
-  s5pc100_defconfig - S5PC100 specific default configuration
   s5pc110_defconfig - S5PC110 specific default configuration
   s5pv210_defconfig - S5PV210 specific default configuration
 
@@ -67,13 +63,6 @@ Layout changes
   where to simplify the include and dependency issues involved with having
   so many different platform directories.
 
-  It was decided to remove plat-s5pc1xx as some of the support was already
-  in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210
-  the only user was the S5PC100. The S5PC100 specific items where moved to
-  arch/arm/mach-s5pc100.
-
-
-
 
 Port Contributors
 -----------------

Documentation/arm/Samsung/clksrc-change-registers.awk

@@ -68,7 +68,6 @@ BEGIN {
 
     while (getline line < ARGV[1] > 0) {
 	if (line ~ /\#define.*_MASK/ &&
-	    !(line ~ /S5PC100_EPLL_MASK/) &&
 	    !(line ~ /USB_SIG_MASK/)) {
 	    splitdefine(line, fields)
 	    name = fields[0]

Documentation/arm64/booting.txt

@@ -72,27 +72,54 @@ The decompressed kernel image contains a 64-byte header as follows:
 
   u32 code0;			/* Executable code */
   u32 code1;			/* Executable code */
-  u64 text_offset;		/* Image load offset */
-  u64 res0	= 0;		/* reserved */
-  u64 res1	= 0;		/* reserved */
+  u64 text_offset;		/* Image load offset, little endian */
+  u64 image_size;		/* Effective Image size, little endian */
+  u64 flags;			/* kernel flags, little endian */
   u64 res2	= 0;		/* reserved */
   u64 res3	= 0;		/* reserved */
   u64 res4	= 0;		/* reserved */
   u32 magic	= 0x644d5241;	/* Magic number, little endian, "ARM\x64" */
-  u32 res5 = 0;      		/* reserved */
+  u32 res5;      		/* reserved (used for PE COFF offset) */
 
 
 Header notes:
 
+- As of v3.17, all fields are little endian unless stated otherwise.
+
 - code0/code1 are responsible for branching to stext.
+
 - when booting through EFI, code0/code1 are initially skipped.
   res5 is an offset to the PE header and the PE header has the EFI
-  entry point (efi_stub_entry). When the stub has done its work, it
+  entry point (efi_stub_entry).  When the stub has done its work, it
   jumps to code0 to resume the normal boot process.
 
-The image must be placed at the specified offset (currently 0x80000)
-from the start of the system RAM and called there. The start of the
-system RAM must be aligned to 2MB.
+- Prior to v3.17, the endianness of text_offset was not specified.  In
+  these cases image_size is zero and text_offset is 0x80000 in the
+  endianness of the kernel.  Where image_size is non-zero image_size is
+  little-endian and must be respected.  Where image_size is zero,
+  text_offset can be assumed to be 0x80000.
+
+- The flags field (introduced in v3.17) is a little-endian 64-bit field
+  composed as follows:
+  Bit 0: 	Kernel endianness.  1 if BE, 0 if LE.
+  Bits 1-63:	Reserved.
+
+- When image_size is zero, a bootloader should attempt to keep as much
+  memory as possible free for use by the kernel immediately after the
+  end of the kernel image. The amount of space required will vary
+  depending on selected features, and is effectively unbound.
+
+The Image must be placed text_offset bytes from a 2MB aligned base
+address near the start of usable system RAM and called there. Memory
+below that base address is currently unusable by Linux, and therefore it
+is strongly recommended that this location is the start of system RAM.
+At least image_size bytes from the start of the image must be free for
+use by the kernel.
+
+Any memory described to the kernel (even that below the 2MB aligned base
+address) which is not marked as reserved from the kernel e.g. with a
+memreserve region in the device tree) will be considered as available to
+the kernel.
 
 Before jumping into the kernel, the following conditions must be met:
 
@@ -141,6 +168,14 @@ Before jumping into the kernel, the following conditions must be met:
   the kernel image will be entered must be initialised by software at a
   higher exception level to prevent execution in an UNKNOWN state.
 
+  For systems with a GICv3 interrupt controller:
+  - If EL3 is present:
+    ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1.
+    ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1.
+  - If the kernel is entered at EL1:
+    ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1
+    ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.

Documentation/arm64/memory.txt

@@ -2,18 +2,18 @@
 		     ==============================
 
 Author: Catalin Marinas <catalin.marinas@arm.com>
-Date  : 20 February 2012
 
 This document describes the virtual memory layout used by the AArch64
 Linux kernel. The architecture allows up to 4 levels of translation
 tables with a 4KB page size and up to 3 levels with a 64KB page size.
 
-AArch64 Linux uses 3 levels of translation tables with the 4KB page
-configuration, allowing 39-bit (512GB) virtual addresses for both user
-and kernel. With 64KB pages, only 2 levels of translation tables are
-used but the memory layout is the same.
+AArch64 Linux uses either 3 levels or 4 levels of translation tables
+with the 4KB page configuration, allowing 39-bit (512GB) or 48-bit
+(256TB) virtual addresses, respectively, for both user and kernel. With
+64KB pages, only 2 levels of translation tables, allowing 42-bit (4TB)
+virtual address, are used but the memory layout is the same.
 
-User addresses have bits 63:39 set to 0 while the kernel addresses have
+User addresses have bits 63:48 set to 0 while the kernel addresses have
 the same bits set to 1. TTBRx selection is given by bit 63 of the
 virtual address. The swapper_pg_dir contains only kernel (global)
 mappings while the user pgd contains only user (non-global) mappings.
@@ -21,58 +21,40 @@ The swapper_pgd_dir address is written to TTBR1 and never written to
 TTBR0.
 
 
-AArch64 Linux memory layout with 4KB pages:
+AArch64 Linux memory layout with 4KB pages + 3 levels:
 
 Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	0000007fffffffff	 512GB		user
+ffffff8000000000	ffffffffffffffff	 512GB		kernel
 
-ffffff8000000000	ffffffbbfffeffff	~240GB		vmalloc
 
-ffffffbbffff0000	ffffffbbffffffff	  64KB		[guard page]
+AArch64 Linux memory layout with 4KB pages + 4 levels:
 
-ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
-
-ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
-
-ffffffbffa000000	ffffffbffaffffff	  16MB		PCI I/O space
-
-ffffffbffb000000	ffffffbffbbfffff	  12MB		[guard]
-
-ffffffbffbc00000	ffffffbffbdfffff	   2MB		fixed mappings
-
-ffffffbffbe00000	ffffffbffbffffff	   2MB		[guard]
-
-ffffffbffc000000	ffffffbfffffffff	  64MB		modules
-
-ffffffc000000000	ffffffffffffffff	 256GB		kernel logical memory map
+Start			End			Size		Use
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		user
+ffff000000000000	ffffffffffffffff	 256TB		kernel
 
 
-AArch64 Linux memory layout with 64KB pages:
+AArch64 Linux memory layout with 64KB pages + 2 levels:
 
 Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	000003ffffffffff	   4TB		user
+fffffc0000000000	ffffffffffffffff	   4TB		kernel
 
-fffffc0000000000	fffffdfbfffeffff	  ~2TB		vmalloc
 
-fffffdfbffff0000	fffffdfbffffffff	  64KB		[guard page]
+AArch64 Linux memory layout with 64KB pages + 3 levels:
 
-fffffdfc00000000	fffffdfdffffffff	   8GB		vmemmap
-
-fffffdfe00000000	fffffdfffbbfffff	  ~8GB		[guard, future vmmemap]
-
-fffffdfffa000000	fffffdfffaffffff	  16MB		PCI I/O space
-
-fffffdfffb000000	fffffdfffbbfffff	  12MB		[guard]
-
-fffffdfffbc00000	fffffdfffbdfffff	   2MB		fixed mappings
-
-fffffdfffbe00000	fffffdfffbffffff	   2MB		[guard]
+Start			End			Size		Use
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		user
+ffff000000000000	ffffffffffffffff	 256TB		kernel
 
-fffffdfffc000000	fffffdffffffffff	  64MB		modules
 
-fffffe0000000000	ffffffffffffffff	   2TB		kernel logical memory map
+For details of the virtual kernel memory layout please see the kernel
+booting log.
 
 
 Translation table lookup with 4KB pages:
@@ -86,7 +68,7 @@ Translation table lookup with 4KB pages:
  |                 |         |         |         +-> [20:12] L3 index
  |                 |         |         +-----------> [29:21] L2 index
  |                 |         +---------------------> [38:30] L1 index
- |                 +-------------------------------> [47:39] L0 index (not used)
+ |                 +-------------------------------> [47:39] L0 index
  +-------------------------------------------------> [63] TTBR0/1
 
 
@@ -99,10 +81,11 @@ Translation table lookup with 64KB pages:
  |                 |    |               |              v
  |                 |    |               |            [15:0]  in-page offset
  |                 |    |               +----------> [28:16] L3 index
- |                 |    +--------------------------> [41:29] L2 index (only 38:29 used)
- |                 +-------------------------------> [47:42] L1 index (not used)
+ |                 |    +--------------------------> [41:29] L2 index
+ |                 +-------------------------------> [47:42] L1 index
  +-------------------------------------------------> [63] TTBR0/1
 
+
 When using KVM, the hypervisor maps kernel pages in EL2, at a fixed
 offset from the kernel VA (top 24bits of the kernel VA set to zero):
 

Documentation/cgroups/cgroups.txt

@@ -599,6 +599,20 @@ fork. If this method returns 0 (success) then this should remain valid
 while the caller holds cgroup_mutex and it is ensured that either
 attach() or cancel_attach() will be called in future.
 
+void css_reset(struct cgroup_subsys_state *css)
+(cgroup_mutex held by caller)
+
+An optional operation which should restore @css's configuration to the
+initial state.  This is currently only used on the unified hierarchy
+when a subsystem is disabled on a cgroup through
+"cgroup.subtree_control" but should remain enabled because other
+subsystems depend on it.  cgroup core makes such a css invisible by
+removing the associated interface files and invokes this callback so
+that the hidden subsystem can return to the initial neutral state.
+This prevents unexpected resource control from a hidden css and
+ensures that the configuration is in the initial state when it is made
+visible again later.
+
 void cancel_attach(struct cgroup *cgrp, struct cgroup_taskset *tset)
 (cgroup_mutex held by caller)
 

Documentation/cgroups/memcg_test.txt

@@ -24,64 +24,27 @@ Please note that implementation details can be changed.
 
    a page/swp_entry may be charged (usage += PAGE_SIZE) at
 
-	mem_cgroup_charge_anon()
-	  Called at new page fault and Copy-On-Write.
-
-	mem_cgroup_try_charge_swapin()
-	  Called at do_swap_page() (page fault on swap entry) and swapoff.
-	  Followed by charge-commit-cancel protocol. (With swap accounting)
-	  At commit, a charge recorded in swap_cgroup is removed.
-
-	mem_cgroup_charge_file()
-	  Called at add_to_page_cache()
-
-	mem_cgroup_cache_charge_swapin()
-	  Called at shmem's swapin.
-
-	mem_cgroup_prepare_migration()
-	  Called before migration. "extra" charge is done and followed by
-	  charge-commit-cancel protocol.
-	  At commit, charge against oldpage or newpage will be committed.
+	mem_cgroup_try_charge()
 
 2. Uncharge
   a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by
 
-	mem_cgroup_uncharge_page()
-	  Called when an anonymous page is fully unmapped. I.e., mapcount goes
-	  to 0. If the page is SwapCache, uncharge is delayed until
-	  mem_cgroup_uncharge_swapcache().
-
-	mem_cgroup_uncharge_cache_page()
-	  Called when a page-cache is deleted from radix-tree. If the page is
-	  SwapCache, uncharge is delayed until mem_cgroup_uncharge_swapcache().
-
-	mem_cgroup_uncharge_swapcache()
-	  Called when SwapCache is removed from radix-tree. The charge itself
-	  is moved to swap_cgroup. (If mem+swap controller is disabled, no
-	  charge to swap occurs.)
+	mem_cgroup_uncharge()
+	  Called when a page's refcount goes down to 0.
 
 	mem_cgroup_uncharge_swap()
 	  Called when swp_entry's refcnt goes down to 0. A charge against swap
 	  disappears.
 
-	mem_cgroup_end_migration(old, new)
-	At success of migration old is uncharged (if necessary), a charge
-	to new page is committed. At failure, charge to old page is committed.
-
 3. charge-commit-cancel
-	In some case, we can't know this "charge" is valid or not at charging
-	(because of races).
-	To handle such case, there are charge-commit-cancel functions.
-		mem_cgroup_try_charge_XXX
-		mem_cgroup_commit_charge_XXX
-		mem_cgroup_cancel_charge_XXX
-	these are used in swap-in and migration.
+	Memcg pages are charged in two steps:
+		mem_cgroup_try_charge()
+		mem_cgroup_commit_charge() or mem_cgroup_cancel_charge()
 
 	At try_charge(), there are no flags to say "this page is charged".
 	at this point, usage += PAGE_SIZE.
 
-	At commit(), the function checks the page should be charged or not
-	and set flags or avoid charging.(usage -= PAGE_SIZE)
+	At commit(), the page is associated with the memcg.
 
 	At cancel(), simply usage -= PAGE_SIZE.
 
@@ -91,18 +54,6 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	Anonymous page is newly allocated at
 		  - page fault into MAP_ANONYMOUS mapping.
 		  - Copy-On-Write.
- 	It is charged right after it's allocated before doing any page table
-	related operations. Of course, it's uncharged when another page is used
-	for the fault address.
-
-	At freeing anonymous page (by exit() or munmap()), zap_pte() is called
-	and pages for ptes are freed one by one.(see mm/memory.c). Uncharges
-	are done at page_remove_rmap() when page_mapcount() goes down to 0.
-
-	Another page freeing is by page-reclaim (vmscan.c) and anonymous
-	pages are swapped out. In this case, the page is marked as
-	PageSwapCache(). uncharge() routine doesn't uncharge the page marked
-	as SwapCache(). It's delayed until __delete_from_swap_cache().
 
 	4.1 Swap-in.
 	At swap-in, the page is taken from swap-cache. There are 2 cases.
@@ -111,41 +62,6 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	(b) If the SwapCache has been mapped by processes, it has been
 	    charged already.
 
-	This swap-in is one of the most complicated work. In do_swap_page(),
-	following events occur when pte is unchanged.
-
-	(1) the page (SwapCache) is looked up.
-	(2) lock_page()
-	(3) try_charge_swapin()
-	(4) reuse_swap_page() (may call delete_swap_cache())
-	(5) commit_charge_swapin()
-	(6) swap_free().
-
-	Considering following situation for example.
-
-	(A) The page has not been charged before (2) and reuse_swap_page()
-	    doesn't call delete_from_swap_cache().
-	(B) The page has not been charged before (2) and reuse_swap_page()
-	    calls delete_from_swap_cache().
-	(C) The page has been charged before (2) and reuse_swap_page() doesn't
-	    call delete_from_swap_cache().
-	(D) The page has been charged before (2) and reuse_swap_page() calls
-	    delete_from_swap_cache().
-
-	    memory.usage/memsw.usage changes to this page/swp_entry will be
-	 Case          (A)      (B)       (C)     (D)
-         Event
-       Before (2)     0/ 1     0/ 1      1/ 1    1/ 1
-          ===========================================
-          (3)        +1/+1    +1/+1     +1/+1   +1/+1
-          (4)          -       0/ 0       -     -1/ 0
-          (5)         0/-1     0/ 0     -1/-1    0/ 0
-          (6)          -       0/-1       -      0/-1
-          ===========================================
-       Result         1/ 1     1/ 1      1/ 1    1/ 1
-
-       In any cases, charges to this page should be 1/ 1.
-
 	4.2 Swap-out.
 	At swap-out, typical state transition is below.
 
@@ -158,28 +74,20 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	    swp_entry's refcnt -= 1.
 
 
-	At (b), the page is marked as SwapCache and not uncharged.
-	At (d), the page is removed from SwapCache and a charge in page_cgroup
-	is moved to swap_cgroup.
-
 	Finally, at task exit,
 	(e) zap_pte() is called and swp_entry's refcnt -=1 -> 0.
-	Here, a charge in swap_cgroup disappears.
 
 5. Page Cache
    	Page Cache is charged at
 	- add_to_page_cache_locked().
 
-	uncharged at
-	- __remove_from_page_cache().
-
 	The logic is very clear. (About migration, see below)
 	Note: __remove_from_page_cache() is called by remove_from_page_cache()
 	and __remove_mapping().
 
 6. Shmem(tmpfs) Page Cache
-	Memcg's charge/uncharge have special handlers of shmem. The best way
-	to understand shmem's page state transition is to read mm/shmem.c.
+	The best way to understand shmem's page state transition is to read
+	mm/shmem.c.
 	But brief explanation of the behavior of memcg around shmem will be
 	helpful to understand the logic.
 
@@ -192,56 +100,10 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	It's charged when...
 	- A new page is added to shmem's radix-tree.
 	- A swp page is read. (move a charge from swap_cgroup to page_cgroup)
-	It's uncharged when
-	- A page is removed from radix-tree and not SwapCache.
-	- When SwapCache is removed, a charge is moved to swap_cgroup.
-	- When swp_entry's refcnt goes down to 0, a charge in swap_cgroup
-	  disappears.
 
 7. Page Migration
-   	One of the most complicated functions is page-migration-handler.
-	Memcg has 2 routines. Assume that we are migrating a page's contents
-	from OLDPAGE to NEWPAGE.
-
-	Usual migration logic is..
-	(a) remove the page from LRU.
-	(b) allocate NEWPAGE (migration target)
-	(c) lock by lock_page().
-	(d) unmap all mappings.
-	(e-1) If necessary, replace entry in radix-tree.
-	(e-2) move contents of a page.
-	(f) map all mappings again.
-	(g) pushback the page to LRU.
-	(-) OLDPAGE will be freed.
-
-	Before (g), memcg should complete all necessary charge/uncharge to
-	NEWPAGE/OLDPAGE.
-
-	The point is....
-	- If OLDPAGE is anonymous, all charges will be dropped at (d) because
-          try_to_unmap() drops all mapcount and the page will not be
-	  SwapCache.
-
-	- If OLDPAGE is SwapCache, charges will be kept at (g) because
-	  __delete_from_swap_cache() isn't called at (e-1)
-
-	- If OLDPAGE is page-cache, charges will be kept at (g) because
-	  remove_from_swap_cache() isn't called at (e-1)
-
-	memcg provides following hooks.
-
-	- mem_cgroup_prepare_migration(OLDPAGE)
-	  Called after (b) to account a charge (usage += PAGE_SIZE) against
-	  memcg which OLDPAGE belongs to.
-
-        - mem_cgroup_end_migration(OLDPAGE, NEWPAGE)
-	  Called after (f) before (g).
-	  If OLDPAGE is used, commit OLDPAGE again. If OLDPAGE is already
-	  charged, a charge by prepare_migration() is automatically canceled.
-	  If NEWPAGE is used, commit NEWPAGE and uncharge OLDPAGE.
-
-	  But zap_pte() (by exit or munmap) can be called while migration,
-	  we have to check if OLDPAGE/NEWPAGE is a valid page after commit().
+
+	mem_cgroup_migrate()
 
 8. LRU
         Each memcg has its own private LRU. Now, its handling is under global

Documentation/cgroups/unified-hierarchy.txt

@@ -94,12 +94,35 @@ change soon.
 
  mount -t cgroup -o __DEVEL__sane_behavior cgroup $MOUNT_POINT
 
-All controllers which are not bound to other hierarchies are
-automatically bound to unified hierarchy and show up at the root of
-it.  Controllers which are enabled only in the root of unified
-hierarchy can be bound to other hierarchies at any time.  This allows
-mixing unified hierarchy with the traditional multiple hierarchies in
-a fully backward compatible way.
+All controllers which support the unified hierarchy and are not bound
+to other hierarchies are automatically bound to unified hierarchy and
+show up at the root of it.  Controllers which are enabled only in the
+root of unified hierarchy can be bound to other hierarchies.  This
+allows mixing unified hierarchy with the traditional multiple
+hierarchies in a fully backward compatible way.
+
+For development purposes, the following boot parameter makes all
+controllers to appear on the unified hierarchy whether supported or
+not.
+
+ cgroup__DEVEL__legacy_files_on_dfl
+
+A controller can be moved across hierarchies only after the controller
+is no longer referenced in its current hierarchy.  Because per-cgroup
+controller states are destroyed asynchronously and controllers may
+have lingering references, a controller may not show up immediately on
+the unified hierarchy after the final umount of the previous
+hierarchy.  Similarly, a controller should be fully disabled to be
+moved out of the unified hierarchy and it may take some time for the
+disabled controller to become available for other hierarchies;
+furthermore, due to dependencies among controllers, other controllers
+may need to be disabled too.
+
+While useful for development and manual configurations, dynamically
+moving controllers between the unified and other hierarchies is
+strongly discouraged for production use.  It is recommended to decide
+the hierarchies and controller associations before starting using the
+controllers.
 
 
 2-2. cgroup.subtree_control

Documentation/device-mapper/switch.txt

@@ -106,6 +106,11 @@ which paths.
     The path number in the range 0 ... (<num_paths> - 1).
     Expressed in hexadecimal (WITHOUT any prefix like 0x).
 
+R<n>,<m>
+    This parameter allows repetitive patterns to be loaded quickly. <n> and <m>
+    are hexadecimal numbers. The last <n> mappings are repeated in the next <m>
+    slots.
+
 Status
 ======
 
@@ -124,3 +129,10 @@ Create a switch device with 64kB region size:
 Set mappings for the first 7 entries to point to devices switch0, switch1,
 switch2, switch0, switch1, switch2, switch1:
     dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1
+
+Set repetitive mapping. This command:
+    dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10
+is equivalent to:
+    dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \
+	:1 :2 :1 :2 :1 :2 :1 :2 :1 :2
+

Documentation/devicetree/bindings/arm/adapteva.txt

@@ -0,0 +1,7 @@
+Adapteva Platforms Device Tree Bindings
+---------------------------------------
+
+Parallella board
+
+Required root node properties:
+    - compatible = "adapteva,parallella";

Documentation/devicetree/bindings/arm/arm-boards

@@ -86,3 +86,9 @@ Interrupt controllers:
 	compatible = "arm,versatile-sic";
 	interrupt-controller;
 	#interrupt-cells = <1>;
+
+Required nodes:
+
+- core-module: the root node to the Versatile platforms must have
+  a core-module with regs and the compatible strings
+  "arm,core-module-versatile", "syscon"

Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt

@@ -0,0 +1,14 @@
+Marvell Armada 38x CA9 MPcore SoC Controller
+============================================
+
+Required properties:
+
+- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl".
+
+- reg: should be the register base and length as documented in the
+  datasheet for the CA9 MPcore SoC Control registers
+
+mpcore-soc-ctrl@20d20 {
+	compatible = "marvell,armada-380-mpcore-soc-ctrl";
+	reg = <0x20d20 0x6c>;
+};

Documentation/devicetree/bindings/arm/atmel-pmc.txt

@@ -1,7 +1,10 @@
 * Power Management Controller (PMC)
 
 Required properties:
-- compatible: Should be "atmel,at91rm9200-pmc"
+- compatible: Should be "atmel,<chip>-pmc".
+	<chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
+	at91sam9x5, sama5d3
+
 - reg: Should contain PMC registers location and length
 
 Examples:

Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method

@@ -0,0 +1,36 @@
+Broadcom Kona Family CPU Enable Method
+--------------------------------------
+This binding defines the enable method used for starting secondary
+CPUs in the following Broadcom SoCs:
+  BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
+
+The enable method is specified by defining the following required
+properties in the "cpus" device tree node:
+  - enable-method = "brcm,bcm11351-cpu-method";
+  - secondary-boot-reg = <...>;
+
+The secondary-boot-reg property is a u32 value that specifies the
+physical address of the register used to request the ROM holding pen
+code release a secondary CPU.  The value written to the register is
+formed by encoding the target CPU id into the low bits of the
+physical start address it should jump to.
+
+Example:
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm11351-cpu-method";
+		secondary-boot-reg = <0x3500417c>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+		};
+	};

Documentation/devicetree/bindings/arm/brcm-brcmstb.txt

@@ -0,0 +1,95 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+    #address-cells = <2>;
+    #size-cells = <2>;
+    model = "Broadcom STB (bcm7445)";
+    compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-cpubiuctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+example:
+    rdb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "simple-bus";
+        ranges = <0 0x00 0xf0000000 0x1000000>;
+
+        sun_top_ctrl: syscon@404000 {
+            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+            reg = <0x404000 0x51c>;
+        };
+
+        hif_cpubiuctrl: syscon@3e2400 {
+            compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon";
+            reg = <0x3e2400 0x5b4>;
+        };
+
+        hif_continuation: syscon@452000 {
+            compatible = "brcm,bcm7445-hif-continuation", "syscon";
+            reg = <0x452000 0x100>;
+        };
+    };
+
+Lastly, nodes that allow for support of SMP initialization and reboot are
+required:
+
+smpboot
+-------
+Required properties:
+
+    - compatible
+        The string "brcm,brcmstb-smpboot".
+
+    - syscon-cpu
+        A phandle / integer array property which lets the BSP know the location
+        of certain CPU power-on registers.
+
+        The layout of the property is as follows:
+            o a phandle to the "hif_cpubiuctrl" syscon node
+            o offset to the base CPU power zone register
+            o offset to the base CPU reset register
+
+    - syscon-cont
+        A phandle pointing to the syscon node which describes the CPU boot
+        continuation registers.
+            o a phandle to the "hif_continuation" syscon node
+
+example:
+    smpboot {
+        compatible = "brcm,brcmstb-smpboot";
+        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+        syscon-cont = <&hif_continuation>;
+    };
+
+reboot
+-------
+Required properties
+
+    - compatible
+        The string property "brcm,brcmstb-reboot".
+
+    - syscon
+        A phandle / integer array that points to the syscon node which describes
+        the general system reset registers.
+            o a phandle to "sun_top_ctrl"
+            o offset to the "reset source enable" register
+            o offset to the "software master reset" register
+
+example:
+    reboot {
+        compatible = "brcm,brcmstb-reboot";
+        syscon = <&sun_top_ctrl 0x304 0x308>;
+    };

Documentation/devicetree/bindings/arm/ccn.txt

@@ -0,0 +1,21 @@
+* ARM CCN (Cache Coherent Network)
+
+Required properties:
+
+- compatible: (standard compatible string) should be one of:
+	"arm,ccn-504"
+	"arm,ccn-508"
+
+- reg: (standard registers property) physical address and size
+	(16MB) of the configuration registers block
+
+- interrupts: (standard interrupt property) single interrupt
+	generated by the control block
+
+Example:
+
+	ccn@0x2000000000 {
+		compatible = "arm,ccn-504";
+		reg = <0x20 0x00000000 0 0x1000000>;
+		interrupts = <0 181 4>;
+	};

Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp

@@ -0,0 +1,41 @@
+========================================================
+Secondary CPU enable-method "marvell,berlin-smp" binding
+========================================================
+
+This document describes the "marvell,berlin-smp" method for enabling secondary
+CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should
+be defined in the "cpus" node.
+
+Enable method name:	"marvell,berlin-smp"
+Compatible machines:	"marvell,berlin2" and "marvell,berlin2q"
+Compatible CPUs:	"marvell,pj4b" and "arm,cortex-a9"
+Related properties:	(none)
+
+Note:
+This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and
+"marvell,berlin-cpu-ctrl"[1].
+
+Example:
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,berlin-smp";
+
+		cpu@0 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <0>;
+		};
+
+		cpu@1 {
+			compatible = "marvell,pj4b";
+			device_type = "cpu";
+			next-level-cache = <&l2>;
+			reg = <1>;
+		};
+	};
+
+--
+[1] arm/marvell,berlin.txt

Documentation/devicetree/bindings/arm/cpus.txt

@@ -152,7 +152,9 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-a7"
 			    "arm,cortex-a8"
 			    "arm,cortex-a9"
+			    "arm,cortex-a12"
 			    "arm,cortex-a15"
+			    "arm,cortex-a17"
 			    "arm,cortex-a53"
 			    "arm,cortex-a57"
 			    "arm,cortex-m0"
@@ -163,6 +165,7 @@ nodes to be present and contain the properties described below.
 			    "arm,cortex-r4"
 			    "arm,cortex-r5"
 			    "arm,cortex-r7"
+			    "brcm,brahma-b15"
 			    "faraday,fa526"
 			    "intel,sa110"
 			    "intel,sa1100"
@@ -184,6 +187,7 @@ nodes to be present and contain the properties described below.
 			  can be one of:
 			    "allwinner,sun6i-a31"
 			    "arm,psci"
+			    "brcm,brahma-b15"
 			    "marvell,armada-375-smp"
 			    "marvell,armada-380-smp"
 			    "marvell,armada-xp-smp"

Documentation/devicetree/bindings/arm/gic-v3.txt

@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain  "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. Must be a single cell with a value of at least 3.
+
+  The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+  interrupts. Other values are reserved for future use.
+
+  The 2nd cell contains the interrupt number for the interrupt type.
+  SPI interrupts are in the range [0-987]. PPI interrupts are in the
+  range [0-15].
+
+  The 3rd cell is the flags, encoded as follows:
+	bits[3:0] trigger type and level flags.
+		1 = edge triggered
+		4 = level triggered
+
+  Cells 4 and beyond are reserved for future use. When the 1st cell
+  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+  ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+  registers, in the following order:
+  - GIC Distributor interface (GICD)
+  - GIC Redistributors (GICR), one range per redistributor region
+  - GIC CPU interface (GICC)
+  - GIC Hypervisor interface (GICH)
+  - GIC Virtual CPU interface (GICV)
+
+  GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+  of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+  occupied by the redistributors. Required if more than one such
+  region is present.
+
+Examples:
+
+	gic: interrupt-controller@2cf00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c020000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		redistributor-stride = <0x0 0x40000>;	// 256kB stride
+		#redistributor-regions = <2>;
+		reg = <0x0 0x2c010000 0 0x10000>,	// GICD
+		      <0x0 0x2d000000 0 0x800000>,	// GICR 1: CPUs 0-31
+		      <0x0 0x2e000000 0 0x800000>;	// GICR 2: CPUs 32-63
+		      <0x0 0x2c040000 0 0x2000>,	// GICC
+		      <0x0 0x2c060000 0 0x2000>,	// GICH
+		      <0x0 0x2c080000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};

Documentation/devicetree/bindings/arm/gic.txt

@@ -16,6 +16,7 @@ Main node required properties:
 	"arm,cortex-a9-gic"
 	"arm,cortex-a7-gic"
 	"arm,arm11mp-gic"
+	"brcm,brahma-b15-gic"
 - interrupt-controller : Identifies the node as an interrupt controller
 - #interrupt-cells : Specifies the number of cells needed to encode an
   interrupt source.  The type shall be a <u32> and the value shall be 3.

Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt

@@ -31,6 +31,17 @@ Example:
 		reboot-offset = <0x4>;
 	};
 
+-----------------------------------------------------------------------
+Hisilicon CPU controller
+
+Required properties:
+- compatible : "hisilicon,cpuctrl"
+- reg : Register address and size
+
+The clock registers and power registers of secondary cores are defined
+in CPU controller, especially in HIX5HD2 SoC.
+
+-----------------------------------------------------------------------
 PCTRL: Peripheral misc control register
 
 Required Properties:

Documentation/devicetree/bindings/arm/marvell,berlin.txt

@@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are:
 	...
 }
 
+* Marvell Berlin CPU control bindings
+
+CPU control register allows various operations on CPUs, like resetting them
+independently.
+
+Required properties:
+- compatible: should be "marvell,berlin-cpu-ctrl"
+- reg: address and length of the register set
+
+Example:
+
+cpu-ctrl@f7dd0000 {
+	compatible = "marvell,berlin-cpu-ctrl";
+	reg = <0xf7dd0000 0x10000>;
+};
+
 * Marvell Berlin2 chip control binding
 
 Marvell Berlin SoCs have a chip control register set providing several

Documentation/devicetree/bindings/arm/mediatek.txt

@@ -0,0 +1,8 @@
+Mediatek MT6589 Platforms Device Tree Bindings
+
+Boards with a SoC of the Mediatek MT6589 shall have the following property:
+
+Required root node property:
+
+compatible: must contain "mediatek,mt6589"
+

Documentation/devicetree/bindings/arm/omap/crossbar.txt

@@ -10,6 +10,7 @@ Required properties:
 - compatible : Should be "ti,irq-crossbar"
 - reg: Base address and the size of the crossbar registers.
 - ti,max-irqs: Total number of irqs available at the interrupt controller.
+- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed.
 - ti,reg-size: Size of a individual register in bytes. Every individual
 	    register is assumed to be of same size. Valid sizes are 1, 2, 4.
 - ti,irqs-reserved: List of the reserved irq lines that are not muxed using
@@ -17,11 +18,46 @@ Required properties:
 		 so crossbar bar driver should not consider them as free
 		 lines.
 
+Optional properties:
+- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for
+  SOC-specific hard-wiring of those irqs which unexpectedly bypasses the
+  crossbar. These irqs have a crossbar register, but still cannot be used.
+
+- ti,irqs-safe-map: integer which maps to a safe configuration to use
+  when the interrupt controller irq is unused (when not provided, default is 0)
+
 Examples:
 		crossbar_mpu: @4a020000 {
 			compatible = "ti,irq-crossbar";
 			reg = <0x4a002a48 0x130>;
 			ti,max-irqs = <160>;
+			ti,max-crossbar-sources = <400>;
 			ti,reg-size = <2>;
 			ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>;
+			ti,irqs-skip = <10 133 139 140>;
 		};
+
+Consumer:
+========
+See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and
+Documentation/devicetree/bindings/arm/gic.txt for further details.
+
+An interrupt consumer on an SoC using crossbar will use:
+	interrupts = <GIC_SPI request_number interrupt_level>
+When the request number is between 0 to that described by
+"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the
+request_number is greater than "ti,max-crossbar-sources", then it is mapped as a
+quirky hardware mapping direct to GIC.
+
+Example:
+	device_x@0x4a023000 {
+		/* Crossbar 8 used */
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};
+
+	device_y@0x4a033000 {
+		/* Direct mapped GIC SPI 1 used */
+		interrupts = <GIC_SPI DIRECT_IRQ(1) IRQ_TYPE_LEVEL_HIGH>;
+		...
+	};

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -129,6 +129,9 @@ Boards:
 - AM437x GP EVM
   compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43"
 
+- AM437x SK EVM: AM437x StarterKit Evaluation Module
+  compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43"
+
 - DRA742 EVM:  Software Development Board for DRA742
   compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
 

Documentation/devicetree/bindings/arm/omap/prcm.txt

@@ -0,0 +1,65 @@
+OMAP PRCM bindings
+
+Power Reset and Clock Manager lists the device clocks and clockdomains under
+a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it,
+each describing one module and the clock hierarchy under it. see [1] for
+documentation about the individual clock/clockdomain nodes.
+
+[1] Documentation/devicetree/bindings/clock/ti/*
+
+Required properties:
+- compatible:	Must be one of:
+		"ti,am3-prcm"
+		"ti,am3-scrm"
+		"ti,am4-prcm"
+		"ti,am4-scrm"
+		"ti,omap2-prcm"
+		"ti,omap2-scrm"
+		"ti,omap3-prm"
+		"ti,omap3-cm"
+		"ti,omap3-scrm"
+		"ti,omap4-cm1"
+		"ti,omap4-prm"
+		"ti,omap4-cm2"
+		"ti,omap4-scrm"
+		"ti,omap5-prm"
+		"ti,omap5-cm-core-aon"
+		"ti,omap5-scrm"
+		"ti,omap5-cm-core"
+		"ti,dra7-prm"
+		"ti,dra7-cm-core-aon"
+		"ti,dra7-cm-core"
+- reg:		Contains PRCM module register address range
+		(base address and length)
+- clocks:	clocks for this module
+- clockdomains:	clockdomains for this module
+
+Example:
+
+cm: cm@48004000 {
+	compatible = "ti,omap3-cm";
+	reg = <0x48004000 0x4000>;
+
+	cm_clocks: clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	cm_clockdomains: clockdomains {
+	};
+}
+
+&cm_clocks {
+	omap2_32k_fck: omap_32k_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+};
+
+&cm_clockdomains {
+	core_l3_clkdm: core_l3_clkdm {
+		compatible = "ti,clockdomain";
+		clocks = <&sdrc_ick>;
+	};
+};

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -14,14 +14,21 @@ Required properties:
 				for exynos4412/5250 controllers.
 			Must be "samsung,exynos-adc-v2" for
 				future controllers.
+			Must be "samsung,exynos3250-adc" for
+				controllers compatible with ADC of Exynos3250.
 - reg:			Contains ADC register address range (base address and
 			length) and the address of the phy enable register.
 - interrupts: 		Contains the interrupt information for the timer. The
 			format is being dependent on which interrupt controller
 			the Samsung device uses.
 - #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks		From common clock binding: handle to adc clock.
-- clock-names		From common clock binding: Shall be "adc".
+- clocks		From common clock bindings: handles to clocks specified
+			in "clock-names" property, in the same order.
+- clock-names		From common clock bindings: list of clock input names
+			used by ADC block:
+			- "adc" : ADC bus clock
+			- "sclk" : ADC special clock (only for Exynos3250 and
+				   compatible ADC block)
 - vdd-supply		VDD input supply.
 
 Note: child nodes can be added for auto probing from device tree.
@@ -41,6 +48,20 @@ adc: adc@12D10000 {
 	vdd-supply = <&buck5_reg>;
 };
 
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+	compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2;
+	reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+	interrupts = <0 137 0>;
+	#io-channel-cells = <1>;
+	io-channel-ranges;
+
+	clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+	clock-names = "adc", "sclk";
+
+	vdd-supply = <&buck5_reg>;
+};
 
 Example: Adding child nodes in dts file
 

Documentation/devicetree/bindings/arm/samsung/pmu.txt

@@ -7,13 +7,45 @@ Properties:
 		   - "samsung,exynos4212-pmu" - for Exynos4212 SoC,
 		   - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
 		   - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
+		   - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
+		   - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
 		   - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
 		second value must be always "syscon".
 
  - reg : offset and length of the register set.
 
+ - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
+		The single specifier cell is used as index to list of clocks
+		provided by PMU, which is currently:
+			0 : SoC clock output (CLKOUT pin)
+
+ - clock-names : list of clock names for particular CLKOUT mux inputs in
+		following format:
+			"clkoutN", where N is a decimal number corresponding to
+			CLKOUT mux control bits value for given input, e.g.
+				"clkout0", "clkout7", "clkout15".
+
+ - clocks : list of phandles and specifiers to all input clocks listed in
+		clock-names property.
+
 Example :
 pmu_system_controller: system-controller@10040000 {
 	compatible = "samsung,exynos5250-pmu", "syscon";
 	reg = <0x10040000 0x5000>;
+	#clock-cells = <1>;
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+Example of clock consumer :
+
+usb3503: usb3503@08 {
+	/* ... */
+	clock-names = "refclk";
+	clocks = <&pmu_system_controller 0>;
+	/* ... */
 };

Documentation/devicetree/bindings/arm/spear-misc.txt

@@ -0,0 +1,9 @@
+SPEAr Misc configuration
+===========================
+SPEAr SOCs have some miscellaneous registers which are used to configure
+few properties of different peripheral controllers.
+
+misc node required properties:
+
+- compatible Should be	"st,spear1340-misc", "syscon".
+- reg: Address range of misc space upto 8K

Documentation/devicetree/bindings/arm/tegra.txt

@@ -30,6 +30,8 @@ board-specific compatible values:
   nvidia,seaboard
   nvidia,ventana
   nvidia,whistler
+  toradex,apalis_t30
+  toradex,apalis_t30-eval
   toradex,colibri_t20-512
   toradex,iris
 

Documentation/devicetree/bindings/arm/xilinx.txt

@@ -1,7 +1,7 @@
-Xilinx Zynq EP107 Emulation Platform board
+Xilinx Zynq Platforms Device Tree Bindings
 
-This board is an emulation platform for the Zynq product which is
-based on an ARM Cortex A9 processor.
+Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor
+shall have the following properties.
 
 Required root node properties:
-    - compatible = "xlnx,zynq-ep107";
+    - compatible = "xlnx,zynq-7000";

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -3,28 +3,43 @@
 SATA nodes are defined to describe on-chip Serial ATA controllers.
 Each SATA controller should have its own node.
 
+It is possible, but not required, to represent each port as a sub-node.
+It allows to enable each port independently when dealing with multiple
+PHYs.
+
 Required properties:
 - compatible        : compatible string, one of:
   - "allwinner,sun4i-a10-ahci"
-  - "fsl,imx53-ahci"
-  - "fsl,imx6q-ahci"
   - "hisilicon,hisi-ahci"
   - "ibm,476gtr-ahci"
   - "marvell,armada-380-ahci"
   - "snps,dwc-ahci"
   - "snps,exynos5440-ahci"
   - "snps,spear-ahci"
+  - "generic-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
+Please note that when using "generic-ahci" you must also specify a SoC specific
+compatible:
+	compatible = "manufacturer,soc-model-ahci", "generic-ahci";
+
 Optional properties:
 - dma-coherent      : Present if dma operations are coherent
 - clocks            : a list of phandle + clock specifier pairs
 - target-supply     : regulator for SATA target power
+- phys              : reference to the SATA PHY node
+- phy-names         : must be "sata-phy"
+
+Required properties when using sub-nodes:
+- #address-cells    : number of cells to encode an address
+- #size-cells       : number of cells representing the size of an address
+
+
+Sub-nodes required properties:
+- reg               : the port number
+- phys              : reference to the SATA PHY node
 
-"fsl,imx53-ahci", "fsl,imx6q-ahci" required properties:
-- clocks            : must contain the sata, sata_ref and ahb clocks
-- clock-names       : must contain "ahb" for the ahb clock
 
 Examples:
         sata@ffe08000 {
@@ -40,3 +55,23 @@ Examples:
 		clocks = <&pll6 0>, <&ahb_gates 25>;
 		target-supply = <&reg_ahci_5v>;
 	};
+
+With sub-nodes:
+	sata@f7e90000 {
+		compatible = "marvell,berlin2q-achi", "generic-ahci";
+		reg = <0xe90000 0x1000>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&chip CLKID_SATA>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sata0: sata-port@0 {
+			reg = <0>;
+			phys = <&sata_phy 0>;
+		};
+
+		sata1: sata-port@1 {
+			reg = <1>;
+			phys = <&sata_phy 1>;
+		};
+	};

Documentation/devicetree/bindings/ata/ahci-st.txt

@@ -0,0 +1,31 @@
+STMicroelectronics STi SATA controller
+
+This binding describes a SATA device.
+
+Required properties:
+ - compatible	   : Must be "st,sti-ahci"
+ - reg		   : Physical base addresses and length of register sets
+ - interrupts	   : Interrupt associated with the SATA device
+ - interrupt-names :   Associated name must be; "hostc"
+ - resets	   : The power-down and soft-reset lines of SATA IP
+ - reset-names	   :   Associated names must be; "pwr-dwn" and "sw-rst"
+ - clocks	   : The phandle for the clock
+ - clock-names	   :   Associated name must be; "ahci_clk"
+ - phys		   : The phandle for the PHY device
+ - phy-names	   :   Associated name must be; "ahci_phy"
+
+Example:
+
+	sata0: sata@fe380000 {
+		compatible      = "st,sti-ahci";
+		reg             = <0xfe380000 0x1000>;
+		interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
+		interrupt-names = "hostc";
+		phys	        = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
+		phy-names       = "ahci_phy";
+		resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
+				  <&softreset STIH416_SATA0_SOFTRESET>;
+		reset-names     = "pwr-dwn", "sw-rst";
+		clocks	        = <&clk_s_a0_ls CLK_ICN_REG>;
+		clock-names     = "ahci_clk";
+	};

Documentation/devicetree/bindings/ata/imx-sata.txt

@@ -0,0 +1,36 @@
+* Freescale i.MX AHCI SATA Controller
+
+The Freescale i.MX SATA controller mostly conforms to the AHCI interface
+with some special extensions at integration level.
+
+Required properties:
+- compatible : should be one of the following:
+   - "fsl,imx53-ahci" for i.MX53 SATA controller
+   - "fsl,imx6q-ahci" for i.MX6Q SATA controller
+- interrupts : interrupt mapping for SATA IRQ
+- reg : registers mapping
+- clocks : list of clock specifiers, must contain an entry for each
+  required entry in clock-names
+- clock-names : should include "sata", "sata_ref" and "ahb" entries
+
+Optional properties:
+- fsl,transmit-level-mV : transmit voltage level, in millivolts.
+- fsl,transmit-boost-mdB : transmit boost level, in milli-decibels
+- fsl,transmit-atten-16ths : transmit attenuation, in 16ths
+- fsl,receive-eq-mdB : receive equalisation, in milli-decibels
+  Please refer to the technical documentation or the driver source code
+  for the list of legal values for these options.
+- fsl,no-spread-spectrum : disable spread-spectrum clocking on the SATA
+  link.
+
+Examples:
+
+sata@02200000 {
+	compatible = "fsl,imx6q-ahci";
+	reg = <0x02200000 0x4000>;
+	interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_SATA>,
+		 <&clks IMX6QDL_CLK_SATA_REF_100M>,
+		 <&clks IMX6QDL_CLK_AHB>;
+	clock-names = "sata", "sata_ref", "ahb";
+};

Documentation/devicetree/bindings/ata/tegra-sata.txt

@@ -0,0 +1,30 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+- compatible : "nvidia,tegra124-ahci".
+- reg : Should contain 2 entries:
+  - AHCI register set (SATA BAR5)
+  - SATA register set
+- interrupts : Defines the interrupt used by SATA
+- clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - cml1
+  - pll_e
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - sata
+  - sata-oob
+  - sata-cold
+- phys : Must contain an entry for each entry in phy-names.
+  See ../phy/phy-bindings.txt for details.
+- phy-names : Must include the following entries:
+  - sata-phy : XUSB PADCTL SATA PHY
+- hvdd-supply : Defines the SATA HVDD regulator
+- vddio-supply : Defines the SATA VDDIO regulator
+- avdd-supply : Defines the SATA AVDD regulator
+- target-5v-supply : Defines the SATA 5V power regulator
+- target-12v-supply : Defines the SATA 12V power regulator

Documentation/devicetree/bindings/clock/arm-integrator.txt

@@ -1,4 +1,4 @@
-Clock bindings for ARM Integrator Core Module clocks
+Clock bindings for ARM Integrator and Versatile Core Module clocks
 
 Auxilary Oscillator Clock
 
@@ -12,7 +12,7 @@ parent node.
 
 
 Required properties:
-- compatible: must be "arm,integrator-cm-auxosc"
+- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc"
 - #clock-cells: must be <0>
 
 Optional properties:

Documentation/devicetree/bindings/clock/clk-palmas-clk32kg-clocks.txt

@@ -0,0 +1,35 @@
+* Palmas 32KHz clocks *
+
+Palmas device has two clock output pins for 32KHz, KG and KG_AUDIO.
+
+This binding uses the common clock binding ./clock-bindings.txt.
+
+Required properties:
+- compatible :	"ti,palmas-clk32kg" for clk32kg clock
+		"ti,palmas-clk32kgaudio" for clk32kgaudio clock
+- #clock-cells : shall be set to 0.
+
+Optional property:
+- ti,external-sleep-control: The external enable input pins controlled the
+	enable/disable of clocks.  The external enable input pins ENABLE1,
+	ENABLE2 and NSLEEP. The valid values for the external pins are:
+		PALMAS_EXT_CONTROL_PIN_ENABLE1 for ENABLE1 pin
+		PALMAS_EXT_CONTROL_PIN_ENABLE2 for ENABLE2 pin
+		PALMAS_EXT_CONTROL_PIN_NSLEEP for NSLEEP pin
+	Option 0 or missing this property means the clock is enabled/disabled
+	via register access and these pins do not have any control.
+	The macros of external control pins for DTS is defined at
+	dt-bindings/mfd/palmas.h
+
+Example:
+	#include <dt-bindings/mfd/palmas.h>
+	...
+	palmas: tps65913@58 {
+		...
+		clk32kg: palmas_clk32k@0 {
+			compatible = "ti,palmas-clk32kg";
+			#clock-cells = <0>;
+			ti,external-sleep-control = <PALMAS_EXT_CONTROL_PIN_NSLEEP>;
+		};
+		...
+	};

Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt

@@ -0,0 +1,53 @@
+* Samsung Audio Subsystem Clock Controller
+
+The Samsung Audio Subsystem clock controller generates and supplies clocks
+to Audio Subsystem block available in the S5PV210 and compatible SoCs.
+
+Required Properties:
+
+- compatible: should be "samsung,s5pv210-audss-clock".
+- reg: physical base address and length of the controller's register set.
+
+- #clock-cells: should be 1.
+
+- clocks:
+  - hclk: AHB bus clock of the Audio Subsystem.
+  - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If
+    not specified (i.e. xusbxti is used for PLL reference), it is fixed to
+    a clock named "xxti".
+  - fout_epll: Input PLL to the AudioSS block, parent of mout_audss.
+  - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not
+    specified, it is fixed to a clock named "iiscdclk0".
+  - sclk_audio0: Audio bus clock, parent of mout_i2s.
+
+- clock-names: Aliases for the above clocks. They should be "hclk",
+  "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device
+tree sources.
+
+Example: Clock controller node.
+
+	clk_audss: clock-controller@c0900000 {
+		compatible = "samsung,s5pv210-audss-clock";
+		reg = <0xc0900000 0x1000>;
+		#clock-cells = <1>;
+		clock-names = "hclk", "xxti",
+				"fout_epll", "sclk_audio0";
+		clocks = <&clocks DOUT_HCLKP>, <&xxti>,
+				<&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>;
+	};
+
+Example: I2S controller node that consumes the clock generated by the clock
+	 controller. Refer to the standard clock bindings for information
+         about 'clocks' and 'clock-names' property.
+
+	i2s0: i2s@03830000 {
+		/* ... */
+		clock-names = "iis", "i2s_opclk0",
+				"i2s_opclk1";
+		clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>,
+				<&clk_audss CLK_DOUT_AUD_BUS>;
+		/* ... */
+	};

Documentation/devicetree/bindings/clock/clock-bindings.txt

@@ -131,3 +131,39 @@ clock signal, and a UART.
   ("pll" and "pll-switched").
 * The UART has its baud clock connected the external oscillator and its
   register clock connected to the PLL clock (the "pll-switched" signal)
+
+==Assigned clock parents and rates==
+
+Some platforms may require initial configuration of default parent clocks
+and clock frequencies. Such a configuration can be specified in a device tree
+node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
+properties. The assigned-clock-parents property should contain a list of parent
+clocks in form of phandle and clock specifier pairs, the assigned-clock-parents
+property the list of assigned clock frequency values - corresponding to clocks
+listed in the assigned-clocks property.
+
+To skip setting parent or rate of a clock its corresponding entry should be
+set to 0, or can be omitted if it is not followed by any non-zero entry.
+
+    uart@a000 {
+        compatible = "fsl,imx-uart";
+        reg = <0xa000 0x1000>;
+        ...
+        clocks = <&osc 0>, <&pll 1>;
+        clock-names = "baud", "register";
+
+        assigned-clocks = <&clkcon 0>, <&pll 2>;
+        assigned-clock-parents = <&pll 2>;
+        assigned-clock-rates = <0>, <460800>;
+    };
+
+In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
+the <&pll 2> clock is assigned a frequency value of 460800 Hz.
+
+Configuring a clock's parent and rate through the device node that consumes
+the clock can be done only for clocks that have a single user. Specifying
+conflicting parent or rate configuration in multiple consumer nodes for
+a shared clock is forbidden.
+
+Configuration of common clocks, which affect multiple consumer devices can
+be similarly specified in the clock provider node.

Documentation/devicetree/bindings/clock/clps711x-clock.txt

@@ -0,0 +1,19 @@
+* Clock bindings for the Cirrus Logic CLPS711X CPUs
+
+Required properties:
+- compatible       : Shall contain "cirrus,clps711x-clk".
+- reg              : Address of the internal register set.
+- startup-frequency: Factory set CPU startup frequency in HZ.
+- #clock-cells     : Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h
+for the full list of CLPS711X clock IDs.
+
+Example:
+	clks: clks@80000000 {
+		#clock-cells = <1>;
+		compatible = "cirrus,ep7312-clk", "cirrus,clps711x-clk";
+		reg = <0x80000000 0xc000>;
+		startup-frequency = <73728000>;
+	};

Documentation/devicetree/bindings/clock/imx1-clock.txt

@@ -0,0 +1,26 @@
+* Clock bindings for Freescale i.MX1 CPUs
+
+Required properties:
+- compatible: Should be "fsl,imx1-ccm".
+- reg: Address and length of the register set.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h
+for the full list of i.MX1 clock IDs.
+
+Examples:
+	clks: ccm@0021b000 {
+		#clock-cells = <1>;
+		compatible = "fsl,imx1-ccm";
+		reg = <0x0021b000 0x1000>;
+	};
+
+	pwm: pwm@00208000 {
+		#pwm-cells = <2>;
+		compatible = "fsl,imx1-pwm";
+		reg = <0x00208000 0x1000>;
+		interrupts = <34>;
+		clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>;
+		clock-names = "ipg", "per";
+	};

Documentation/devicetree/bindings/clock/imx21-clock.txt

@@ -0,0 +1,28 @@
+* Clock bindings for Freescale i.MX21
+
+Required properties:
+- compatible  : Should be "fsl,imx21-ccm".
+- reg         : Address and length of the register set.
+- interrupts  : Should contain CCM interrupt.
+- #clock-cells: Should be <1>.
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h
+for the full list of i.MX21 clock IDs.
+
+Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx21-ccm";
+		reg = <0x10027000 0x800>;
+		#clock-cells = <1>;
+	};
+
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX21_CLK_UART1_IPG_GATE>,
+			 <&clks IMX21_CLK_PER1>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/imx27-clock.txt

@@ -7,117 +7,22 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX27
-clocks and IDs.
-
-	Clock		    ID
-	-----------------------
-	dummy                0
-	ckih                 1
-	ckil                 2
-	mpll                 3
-	spll                 4
-	mpll_main2           5
-	ahb                  6
-	ipg                  7
-	nfc_div              8
-	per1_div             9
-	per2_div             10
-	per3_div             11
-	per4_div             12
-	vpu_sel              13
-	vpu_div              14
-	usb_div              15
-	cpu_sel              16
-	clko_sel             17
-	cpu_div              18
-	clko_div             19
-	ssi1_sel             20
-	ssi2_sel             21
-	ssi1_div             22
-	ssi2_div             23
-	clko_en              24
-	ssi2_ipg_gate        25
-	ssi1_ipg_gate        26
-	slcdc_ipg_gate       27
-	sdhc3_ipg_gate       28
-	sdhc2_ipg_gate       29
-	sdhc1_ipg_gate       30
-	scc_ipg_gate         31
-	sahara_ipg_gate      32
-	rtc_ipg_gate         33
-	pwm_ipg_gate         34
-	owire_ipg_gate       35
-	lcdc_ipg_gate        36
-	kpp_ipg_gate         37
-	iim_ipg_gate         38
-	i2c2_ipg_gate        39
-	i2c1_ipg_gate        40
-	gpt6_ipg_gate        41
-	gpt5_ipg_gate        42
-	gpt4_ipg_gate        43
-	gpt3_ipg_gate        44
-	gpt2_ipg_gate        45
-	gpt1_ipg_gate        46
-	gpio_ipg_gate        47
-	fec_ipg_gate         48
-	emma_ipg_gate        49
-	dma_ipg_gate         50
-	cspi3_ipg_gate       51
-	cspi2_ipg_gate       52
-	cspi1_ipg_gate       53
-	nfc_baud_gate        54
-	ssi2_baud_gate       55
-	ssi1_baud_gate       56
-	vpu_baud_gate        57
-	per4_gate            58
-	per3_gate            59
-	per2_gate            60
-	per1_gate            61
-	usb_ahb_gate         62
-	slcdc_ahb_gate       63
-	sahara_ahb_gate      64
-	lcdc_ahb_gate        65
-	vpu_ahb_gate         66
-	fec_ahb_gate         67
-	emma_ahb_gate        68
-	emi_ahb_gate         69
-	dma_ahb_gate         70
-	csi_ahb_gate         71
-	brom_ahb_gate        72
-	ata_ahb_gate         73
-	wdog_ipg_gate        74
-	usb_ipg_gate         75
-	uart6_ipg_gate       76
-	uart5_ipg_gate       77
-	uart4_ipg_gate       78
-	uart3_ipg_gate       79
-	uart2_ipg_gate       80
-	uart1_ipg_gate       81
-	ckih_div1p5          82
-	fpm                  83
-	mpll_osc_sel         84
-	mpll_sel             85
-	spll_gate            86
-	mshc_div             87
-	rtic_ipg_gate        88
-	mshc_ipg_gate        89
-	rtic_ahb_gate        90
-	mshc_baud_gate       91
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h
+for the full list of i.MX27 clock IDs.
 
 Examples:
+	clks: ccm@10027000{
+		compatible = "fsl,imx27-ccm";
+		reg = <0x10027000 0x1000>;
+		#clock-cells = <1>;
+	};
 
-clks: ccm@10027000{
-	compatible = "fsl,imx27-ccm";
-	reg = <0x10027000 0x1000>;
-	#clock-cells = <1>;
-};
-
-uart1: serial@1000a000 {
-	compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-	reg = <0x1000a000 0x1000>;
-	interrupts = <20>;
-	clocks = <&clks 81>, <&clks 61>;
-	clock-names = "ipg", "per";
-	status = "disabled";
-};
+	uart1: serial@1000a000 {
+		compatible = "fsl,imx27-uart", "fsl,imx21-uart";
+		reg = <0x1000a000 0x1000>;
+		interrupts = <20>;
+		clocks = <&clks IMX27_CLK_UART1_IPG_GATE>,
+			 <&clks IMX27_CLK_PER1_GATE>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -7,223 +7,13 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX6Q
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	ckih			2
-	osc			3
-	pll2_pfd0_352m		4
-	pll2_pfd1_594m		5
-	pll2_pfd2_396m		6
-	pll3_pfd0_720m		7
-	pll3_pfd1_540m		8
-	pll3_pfd2_508m		9
-	pll3_pfd3_454m		10
-	pll2_198m		11
-	pll3_120m		12
-	pll3_80m		13
-	pll3_60m		14
-	twd			15
-	step			16
-	pll1_sw			17
-	periph_pre		18
-	periph2_pre		19
-	periph_clk2_sel		20
-	periph2_clk2_sel	21
-	axi_sel			22
-	esai_sel		23
-	asrc_sel		24
-	spdif_sel		25
-	gpu2d_axi		26
-	gpu3d_axi		27
-	gpu2d_core_sel		28
-	gpu3d_core_sel		29
-	gpu3d_shader_sel	30
-	ipu1_sel		31
-	ipu2_sel		32
-	ldb_di0_sel		33
-	ldb_di1_sel		34
-	ipu1_di0_pre_sel	35
-	ipu1_di1_pre_sel	36
-	ipu2_di0_pre_sel	37
-	ipu2_di1_pre_sel	38
-	ipu1_di0_sel		39
-	ipu1_di1_sel		40
-	ipu2_di0_sel		41
-	ipu2_di1_sel		42
-	hsi_tx_sel		43
-	pcie_axi_sel		44
-	ssi1_sel		45
-	ssi2_sel		46
-	ssi3_sel		47
-	usdhc1_sel		48
-	usdhc2_sel		49
-	usdhc3_sel		50
-	usdhc4_sel		51
-	enfc_sel		52
-	emi_sel			53
-	emi_slow_sel		54
-	vdo_axi_sel		55
-	vpu_axi_sel		56
-	cko1_sel		57
-	periph			58
-	periph2			59
-	periph_clk2		60
-	periph2_clk2		61
-	ipg			62
-	ipg_per			63
-	esai_pred		64
-	esai_podf		65
-	asrc_pred		66
-	asrc_podf		67
-	spdif_pred		68
-	spdif_podf		69
-	can_root		70
-	ecspi_root		71
-	gpu2d_core_podf		72
-	gpu3d_core_podf		73
-	gpu3d_shader		74
-	ipu1_podf		75
-	ipu2_podf		76
-	ldb_di0_podf		77
-	ldb_di1_podf		78
-	ipu1_di0_pre		79
-	ipu1_di1_pre		80
-	ipu2_di0_pre		81
-	ipu2_di1_pre		82
-	hsi_tx_podf		83
-	ssi1_pred		84
-	ssi1_podf		85
-	ssi2_pred		86
-	ssi2_podf		87
-	ssi3_pred		88
-	ssi3_podf		89
-	uart_serial_podf	90
-	usdhc1_podf		91
-	usdhc2_podf		92
-	usdhc3_podf		93
-	usdhc4_podf		94
-	enfc_pred		95
-	enfc_podf		96
-	emi_podf		97
-	emi_slow_podf		98
-	vpu_axi_podf		99
-	cko1_podf		100
-	axi			101
-	mmdc_ch0_axi_podf	102
-	mmdc_ch1_axi_podf	103
-	arm			104
-	ahb			105
-	apbh_dma		106
-	asrc			107
-	can1_ipg		108
-	can1_serial		109
-	can2_ipg		110
-	can2_serial		111
-	ecspi1			112
-	ecspi2			113
-	ecspi3			114
-	ecspi4			115
-	ecspi5			116
-	enet			117
-	esai			118
-	gpt_ipg			119
-	gpt_ipg_per		120
-	gpu2d_core		121
-	gpu3d_core		122
-	hdmi_iahb		123
-	hdmi_isfr		124
-	i2c1			125
-	i2c2			126
-	i2c3			127
-	iim			128
-	enfc			129
-	ipu1			130
-	ipu1_di0		131
-	ipu1_di1		132
-	ipu2			133
-	ipu2_di0		134
-	ldb_di0			135
-	ldb_di1			136
-	ipu2_di1		137
-	hsi_tx			138
-	mlb			139
-	mmdc_ch0_axi		140
-	mmdc_ch1_axi		141
-	ocram			142
-	openvg_axi		143
-	pcie_axi		144
-	pwm1			145
-	pwm2			146
-	pwm3			147
-	pwm4			148
-	per1_bch		149
-	gpmi_bch_apb		150
-	gpmi_bch		151
-	gpmi_io			152
-	gpmi_apb		153
-	sata			154
-	sdma			155
-	spba			156
-	ssi1			157
-	ssi2			158
-	ssi3			159
-	uart_ipg		160
-	uart_serial		161
-	usboh3			162
-	usdhc1			163
-	usdhc2			164
-	usdhc3			165
-	usdhc4			166
-	vdo_axi			167
-	vpu_axi			168
-	cko1			169
-	pll1_sys		170
-	pll2_bus		171
-	pll3_usb_otg		172
-	pll4_audio		173
-	pll5_video		174
-	pll8_mlb		175
-	pll7_usb_host		176
-	pll6_enet		177
-	ssi1_ipg		178
-	ssi2_ipg		179
-	ssi3_ipg		180
-	rom			181
-	usbphy1			182
-	usbphy2			183
-	ldb_di0_div_3_5		184
-	ldb_di1_div_3_5		185
-	sata_ref		186
-	sata_ref_100m		187
-	pcie_ref		188
-	pcie_ref_125m		189
-	enet_ref		190
-	usbphy1_gate		191
-	usbphy2_gate		192
-	pll4_post_div		193
-	pll5_post_div		194
-	pll5_video_div		195
-	eim_slow      		196
-	spdif      		197
-	cko2_sel      		198
-	cko2_podf      		199
-	cko2      		200
-	cko      		201
-	vdoa      		202
-	pll4_audio_div		203
-	lvds1_sel		204
-	lvds2_sel		205
-	lvds1_gate		206
-	lvds2_gate		207
-	esai_ahb		208
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6qdl-clock.h
+for the full list of i.MX6 Quad and DualLite clock IDs.
 
 Examples:
 
+#include <dt-bindings/clock/imx6qdl-clock.h>
+
 clks: ccm@020c4000 {
 	compatible = "fsl,imx6q-ccm";
 	reg = <0x020c4000 0x4000>;
@@ -235,7 +25,7 @@ uart1: serial@02020000 {
 	compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
 	reg = <0x02020000 0x4000>;
 	interrupts = <0 26 0x04>;
-	clocks = <&clks 160>, <&clks 161>;
+	clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };

Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt

@@ -3,14 +3,15 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms
 Required properties:
 - compatible : shall be one of the following:
 	"marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP
-- reg : Address and length of the clock complex register set
+- reg : Address and length of the clock complex register set, followed
+        by address and length of the PMU DFS registers
 - #clock-cells : should be set to 1.
 - clocks : shall be the input parent clock phandle for the clock.
 
 cpuclk: clock-complex@d0018700 {
 	#clock-cells = <1>;
 	compatible = "marvell,armada-xp-cpu-clock";
-	reg = <0xd0018700 0xA0>;
+	reg = <0xd0018700 0xA0>, <0x1c054 0x10>;
 	clocks = <&coreclk 1>;
 }
 

Documentation/devicetree/bindings/clock/qcom,gcc.txt

@@ -5,6 +5,8 @@ Required properties :
 - compatible : shall contain only one of the following:
 
 			"qcom,gcc-apq8064"
+			"qcom,gcc-apq8084"
+			"qcom,gcc-ipq8064"
 			"qcom,gcc-msm8660"
 			"qcom,gcc-msm8960"
 			"qcom,gcc-msm8974"

Documentation/devicetree/bindings/clock/qcom,mmcc.txt

@@ -4,6 +4,8 @@ Qualcomm Multimedia Clock & Reset Controller Binding
 Required properties :
 - compatible : shall contain only one of the following:
 
+			"qcom,mmcc-apq8064"
+			"qcom,mmcc-apq8084"
 			"qcom,mmcc-msm8660"
 			"qcom,mmcc-msm8960"
 			"qcom,mmcc-msm8974"

Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt

@@ -0,0 +1,61 @@
+* Rockchip RK3188/RK3066 Clock and Reset Unit
+
+The RK3188/RK3066 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
+			"rockchip,rk3066a-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+Similar macros exist for the reset sources in these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "xin27m" - 27mhz crystal input on rk3066 - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_cif0" - external camera clock - optional,
+ - "ext_rmii" - external RMII clock - optional,
+ - "ext_jtag" - externalJTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};

Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt

@@ -0,0 +1,61 @@
+* Rockchip RK3288 Clock and Reset Unit
+
+The RK3288 clock controller generates and supplies clock to various
+controllers within the SoC and also implements a reset controller for SoC
+peripherals.
+
+Required Properties:
+
+- compatible: should be "rockchip,rk3288-cru"
+- reg: physical base address of the controller and length of memory mapped
+  region.
+- #clock-cells: should be 1.
+- #reset-cells: should be 1.
+
+Optional Properties:
+
+- rockchip,grf: phandle to the syscon managing the "general register files"
+  If missing pll rates are not changable, due to the missing pll lock status.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. All available clocks are defined as
+preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+used in device tree sources. Similar macros exist for the reset sources in
+these files.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xin24m" - crystal input - required,
+ - "xin32k" - rtc clock - optional,
+ - "ext_i2s" - external I2S clock - optional,
+ - "ext_hsadc" - external HSADC clock - optional,
+ - "ext_edp_24m" - external display port clock - optional,
+ - "ext_vip" - external VIP clock - optional,
+ - "ext_isp" - external ISP clock - optional,
+ - "ext_jtag" - external JTAG clock - optional
+
+Example: Clock controller node:
+
+	cru: cru@20000000 {
+		compatible = "rockchip,rk3188-cru";
+		reg = <0x20000000 0x1000>;
+		rockchip,grf = <&grf>;
+
+		#clock-cells = <1>;
+		#reset-cells = <1>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller:
+
+	uart0: serial@10124000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x10124000 0x400>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		reg-io-width = <1>;
+		clocks = <&cru SCLK_UART0>;
+	};

Documentation/devicetree/bindings/clock/rockchip.txt

@@ -6,6 +6,9 @@ This binding uses the common clock binding[1].
 
 == Gate clocks ==
 
+These bindings are deprecated!
+Please use the soc specific CRU bindings instead.
+
 The gate registers form a continuos block which makes the dt node
 structure a matter of taste, as either all gates can be put into
 one gate clock spanning all registers or they can be divided into

Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt

@@ -0,0 +1,78 @@
+* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
+
+Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
+controller, which generates and supplies clock to various controllers
+within the SoC.
+
+Required Properties:
+
+- compatible: should be one of following:
+	- "samsung,s5pv210-clock" : for clock controller of Samsung
+	  S5PC110/S5PV210 SoCs,
+	- "samsung,s5p6442-clock" : for clock controller of Samsung
+	  S5P6442 SoC.
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It is expected
+that they are defined using standard clock bindings with following
+clock-output-names:
+ - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
+the SoC,
+ - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
+pins of the SoC,
+
+A subset of above clocks available on given board shall be specified in
+board device tree, including the system base clock, as selected by XOM[0]
+pin of the SoC. Refer to generic fixed rate clock bindings
+documentation[1] for more information how to specify these clocks.
+
+[1] Documentation/devicetree/bindings/clock/fixed-clock.txt
+
+Example: Clock controller node:
+
+	clock: clock-controller@7e00f000 {
+		compatible = "samsung,s5pv210-clock";
+		reg = <0x7e00f000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+Example: Required external clocks:
+
+	xxti: clock-xxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+	xusbxti: clock-xusbxti {
+		compatible = "fixed-clock";
+		clock-output-names = "xusbxti";
+		clock-frequency = <24000000>;
+		#clock-cells = <0>;
+	};
+
+Example: UART controller node that consumes the clock generated by the clock
+  controller (refer to the standard clock bindings for information about
+  "clocks" and "clock-names" properties):
+
+	uart0: serial@e2900000 {
+		compatible = "samsung,s5pv210-uart";
+		reg = <0xe2900000 0x400>;
+		interrupt-parent = <&vic1>;
+		interrupts = <10>;
+		clock-names = "uart", "clk_uart_baud0",
+				"clk_uart_baud1";
+		clocks = <&clocks UART0>, <&clocks UART0>,
+				<&clocks SCLK_UART0>;
+		status = "disabled";
+	};

Documentation/devicetree/bindings/clock/st/st,clkgen-divmux.txt

@@ -24,26 +24,26 @@ Required properties:
 
 Example:
 
-	clockgenA@fd345000 {
+	clockgen-a@fd345000 {
 		reg = <0xfd345000 0xb50>;
 
-		CLK_M_A1_DIV1: CLK_M_A1_DIV1 {
+		clk_m_a1_div1: clk-m-a1-div1 {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-divmux-c32-odf1",
 				     "st,clkgena-divmux";
 
-			clocks = <&CLK_M_A1_OSC_PREDIV>,
-				 <&CLK_M_A1_PLL0 1>, /* PLL0 PHI1 */
-				 <&CLK_M_A1_PLL1 1>; /* PLL1 PHI1 */
-
-			clock-output-names = "CLK_M_RX_ICN_TS",
-					     "CLK_M_RX_ICN_VDP_0",
-					     "", /* Unused */
-					     "CLK_M_PRV_T1_BUS",
-					     "CLK_M_ICN_REG_12",
-					     "CLK_M_ICN_REG_10",
-					     "", /* Unused */
-					     "CLK_M_ICN_ST231";
+			clocks = <&clk_m_a1_osc_prediv>,
+				 <&clk_m_a1_pll0 1>, /* PLL0 PHI1 */
+				 <&clk_m_a1_pll1 1>; /* PLL1 PHI1 */
+
+			clock-output-names = "clk-m-rx-icn-ts",
+					     "clk-m-rx-icn-vdp-0",
+					     "", /* unused */
+					     "clk-m-prv-t1-bus",
+					     "clk-m-icn-reg-12",
+					     "clk-m-icn-reg-10",
+					     "", /* unused */
+					     "clk-m-icn-st231";
 		};
 	};
 

Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt

@@ -17,7 +17,7 @@ Required properties:
 	"st,stih416-clkgenf-vcc-sd",	"st,clkgen-mux"
 	"st,stih415-clkgen-a9-mux",	"st,clkgen-mux"
 	"st,stih416-clkgen-a9-mux",	"st,clkgen-mux"
-
+	"st,stih407-clkgen-a9-mux",	"st,clkgen-mux"
 
 - #clock-cells : from common clock binding; shall be set to 0.
 
@@ -27,10 +27,10 @@ Required properties:
 
 Example:
 
-	CLK_M_HVA: CLK_M_HVA {
+	clk_m_hva: clk-m-hva@fd690868 {
 		#clock-cells = <0>;
 		compatible = "st,stih416-clkgenf-vcc-hva", "st,clkgen-mux";
 		reg = <0xfd690868 4>;
 
-		clocks = <&CLOCKGEN_F 1>, <&CLK_M_A1_DIV0 3>;
+		clocks = <&clockgen_f 1>, <&clk_m_a1_div0 3>;
 	};

Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt

@@ -19,11 +19,14 @@ Required properties:
 	"st,stih415-plls-c32-ddr",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-a9",	"st,clkgen-plls-c32"
 	"st,stih416-plls-c32-ddr",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-a9",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_0",	"st,clkgen-plls-c32"
+	"st,stih407-plls-c32-c0_1",	"st,clkgen-plls-c32"
 
 	"st,stih415-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 	"st,stih416-gpu-pll-c32",	"st,clkgengpu-pll-c32"
 
-
 - #clock-cells : From common clock binding; shall be set to 1.
 
 - clocks : From common clock binding
@@ -32,17 +35,17 @@ Required properties:
 
 Example:
 
-	clockgenA@fee62000 {
+	clockgen-a@fee62000 {
 		reg = <0xfee62000 0xb48>;
 
-		CLK_S_A0_PLL: CLK_S_A0_PLL {
+		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-plls-c65";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_S_A0_PLL0_HS",
-					     "CLK_S_A0_PLL0_LS",
-					     "CLK_S_A0_PLL1";
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
 		};
 	};

Documentation/devicetree/bindings/clock/st/st,clkgen-prediv.txt

@@ -20,17 +20,17 @@ Required properties:
 
 Example:
 
-	clockgenA@fd345000 {
+	clockgen-a@fd345000 {
 		reg = <0xfd345000 0xb50>;
 
-		CLK_M_A2_OSC_PREDIV: CLK_M_A2_OSC_PREDIV {
+		clk_m_a2_osc_prediv: clk-m-a2-osc-prediv {
 			#clock-cells = <0>;
 			compatible = "st,clkgena-prediv-c32",
 				     "st,clkgena-prediv";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_M_A2_OSC_PREDIV";
+			clock-output-names = "clk-m-a2-osc-prediv";
 		};
 	};
 

Documentation/devicetree/bindings/clock/st/st,clkgen-vcc.txt

@@ -32,22 +32,30 @@ Required properties:
 
 Example:
 
-	CLOCKGEN_C_VCC: CLOCKGEN_C_VCC {
+	clockgen_c_vcc: clockgen-c-vcc@0xfe8308ac {
 		#clock-cells = <1>;
 		compatible = "st,stih416-clkgenc", "st,clkgen-vcc";
 		reg = <0xfe8308ac 12>;
 
-		clocks = <&CLK_S_VCC_HD>, <&CLOCKGEN_C 1>,
-			<&CLK_S_TMDS_FROMPHY>, <&CLOCKGEN_C 2>;
-
-		clock-output-names  =
-			"CLK_S_PIX_HDMI",  "CLK_S_PIX_DVO",
-			"CLK_S_OUT_DVO",   "CLK_S_PIX_HD",
-			"CLK_S_HDDAC",     "CLK_S_DENC",
-			"CLK_S_SDDAC",     "CLK_S_PIX_MAIN",
-			"CLK_S_PIX_AUX",   "CLK_S_STFE_FRC_0",
-			"CLK_S_REF_MCRU",  "CLK_S_SLAVE_MCRU",
-			"CLK_S_TMDS_HDMI", "CLK_S_HDMI_REJECT_PLL",
-			"CLK_S_THSENS";
+		clocks = <&clk_s_vcc_hd>,
+			 <&clockgen_c 1>,
+			 <&clk_s_tmds_fromphy>,
+			 <&clockgen_c 2>;
+
+		clock-output-names  = "clk-s-pix-hdmi",
+				      "clk-s-pix-dvo",
+				      "clk-s-out-dvo",
+				      "clk-s-pix-hd",
+				      "clk-s-hddac",
+				      "clk-s-denc",
+				      "clk-s-sddac",
+				      "clk-s-pix-main",
+				      "clk-s-pix-aux",
+				      "clk-s-stfe-frc-0",
+				      "clk-s-ref-mcru",
+				      "clk-s-slave-mcru",
+				      "clk-s-tmds-hdmi",
+				      "clk-s-hdmi-reject-pll",
+				      "clk-s-thsens";
 	};
 

Documentation/devicetree/bindings/clock/st/st,clkgen.txt

@@ -24,60 +24,77 @@ address is common of all subnode.
 		quadfs_node {
 			...
 		};
+
+		mux_node {
+			...
+		};
+
+		vcc_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
 		...
 	};
 
 This binding uses the common clock binding[1].
-Each subnode should use the binding discribe in [2]..[4]
+Each subnode should use the binding discribe in [2]..[7]
 
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[3] Documentation/devicetree/bindings/clock/st,quadfs.txt
-[4] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[2] Documentation/devicetree/bindings/clock/st,clkgen-divmux.txt
+[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
+[5] Documentation/devicetree/bindings/clock/st,clkgen-prediv.txt
+[6] Documentation/devicetree/bindings/clock/st,vcc.txt
+[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
+
 
 Required properties:
 - reg : A Base address and length of the register set.
 
 Example:
 
-	clockgenA@fee62000 {
+	clockgen-a@fee62000 {
 
 		reg = <0xfee62000 0xb48>;
 
-		CLK_S_A0_PLL: CLK_S_A0_PLL {
+		clk_s_a0_pll: clk-s-a0-pll {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-plls-c65";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk-sysin>;
 
-			clock-output-names = "CLK_S_A0_PLL0_HS",
-					     "CLK_S_A0_PLL0_LS",
-					     "CLK_S_A0_PLL1";
+			clock-output-names = "clk-s-a0-pll0-hs",
+					     "clk-s-a0-pll0-ls",
+					     "clk-s-a0-pll1";
 		};
 
-		CLK_S_A0_OSC_PREDIV: CLK_S_A0_OSC_PREDIV {
+		clk_s_a0_osc_prediv: clk-s-a0-osc-prediv {
 			#clock-cells = <0>;
 			compatible = "st,clkgena-prediv-c65",
 				     "st,clkgena-prediv";
 
-			clocks = <&CLK_SYSIN>;
+			clocks = <&clk_sysin>;
 
-			clock-output-names = "CLK_S_A0_OSC_PREDIV";
+			clock-output-names = "clk-s-a0-osc-prediv";
 		};
 
-		CLK_S_A0_HS: CLK_S_A0_HS {
+		clk_s_a0_hs: clk-s-a0-hs {
 			#clock-cells = <1>;
 			compatible = "st,clkgena-divmux-c65-hs",
 				     "st,clkgena-divmux";
 
-			clocks = <&CLK_S_A0_OSC_PREDIV>,
-				 <&CLK_S_A0_PLL 0>, /* PLL0 HS */
-				 <&CLK_S_A0_PLL 2>; /* PLL1 */
+			clocks = <&clk-s_a0_osc_prediv>,
+				 <&clk-s_a0_pll 0>, /* pll0 hs */
+				 <&clk-s_a0_pll 2>; /* pll1 */
 
-			clock-output-names = "CLK_S_FDMA_0",
-					     "CLK_S_FDMA_1",
-					     ""; /* CLK_S_JIT_SENSE */
-					     /* Fourth output unused */
+			clock-output-names = "clk-s-fdma-0",
+					     "clk-s-fdma-1",
+					     ""; /* clk-s-jit-sense */
+					     /* fourth output unused */
 		};
 	};
 

Documentation/devicetree/bindings/clock/st/st,flexgen.txt

@@ -0,0 +1,119 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen stucture                              |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it's could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};

Documentation/devicetree/bindings/clock/st/st,quadfs.txt

@@ -15,6 +15,9 @@ Required properties:
   "st,stih416-quadfs432",	"st,quadfs"
   "st,stih416-quadfs660-E",	"st,quadfs"
   "st,stih416-quadfs660-F",	"st,quadfs"
+  "st,stih407-quadfs660-C",	"st,quadfs"
+  "st,stih407-quadfs660-D",	"st,quadfs"
+
 
 - #clock-cells : from common clock binding; shall be set to 1.
 
@@ -32,14 +35,14 @@ Required properties:
 
 Example:
 
-	CLOCKGEN_E: CLOCKGEN_E {
+	clockgen_e: clockgen-e@fd3208bc {
                 #clock-cells = <1>;
                 compatible = "st,stih416-quadfs660-E", "st,quadfs";
                 reg = <0xfd3208bc 0xB0>;
 
-                clocks = <&CLK_SYSIN>;
-                clock-output-names = "CLK_M_PIX_MDTP_0",
-                                        "CLK_M_PIX_MDTP_1",
-                                        "CLK_M_PIX_MDTP_2",
-                                        "CLK_M_MPELPC";
+                clocks = <&clk_sysin>;
+                clock-output-names = "clk-m-pix-mdtp-0",
+				     "clk-m-pix-mdtp-1",
+				     "clk-m-pix-mdtp-2",
+				     "clk-m-mpelpc";
         };

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -9,11 +9,13 @@ Required properties:
 	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
 	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
 	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
+	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
 	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
 	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
 	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
 	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
 	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
+	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
 	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
 	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
 	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
@@ -23,13 +25,16 @@ Required properties:
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
 	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
+	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
 	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
 	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
+	"allwinner,sun8i-a23-apb0-clk" - for the APB0 clock on A23
 	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
 	"allwinner,sun5i-a13-apb0-gates-clk" - for the APB0 gates on A13
 	"allwinner,sun5i-a10s-apb0-gates-clk" - for the APB0 gates on A10s
 	"allwinner,sun6i-a31-apb0-gates-clk" - for the APB0 gates on A31
 	"allwinner,sun7i-a20-apb0-gates-clk" - for the APB0 gates on A20
+	"allwinner,sun8i-a23-apb0-gates-clk" - for the APB0 gates on A23
 	"allwinner,sun4i-a10-apb1-clk" - for the APB1 clock
 	"allwinner,sun4i-a10-apb1-mux-clk" - for the APB1 clock muxing
 	"allwinner,sun4i-a10-apb1-gates-clk" - for the APB1 gates on A10
@@ -37,8 +42,10 @@ Required properties:
 	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
 	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
 	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
+	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
 	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
 	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
+	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
 	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
 	"allwinner,sun7i-a20-out-clk" - for the external output clocks
 	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31

Documentation/devicetree/bindings/crypto/amd-ccp.txt

@@ -0,0 +1,19 @@
+* AMD Cryptographic Coprocessor driver (ccp)
+
+Required properties:
+- compatible: Should be "amd,ccp-seattle-v1a"
+- reg: Address and length of the register set for the device
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the CCP interrupt
+
+Optional properties:
+- dma-coherent: Present if dma operations are coherent
+
+Example:
+	ccp@e0100000 {
+		compatible = "amd,ccp-seattle-v1a";
+		reg = <0 0xe0100000 0 0x10000>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 3 4>;
+	};

Documentation/devicetree/bindings/crypto/qcom-qce.txt

@@ -0,0 +1,25 @@
+Qualcomm crypto engine driver
+
+Required properties:
+
+- compatible  : should be "qcom,crypto-v5.1"
+- reg         : specifies base physical address and size of the registers map
+- clocks      : phandle to clock-controller plus clock-specifier pair
+- clock-names : "iface" clocks register interface
+                "bus" clocks data transfer interface
+                "core" clocks rest of the crypto block
+- dmas        : DMA specifiers for tx and rx dma channels. For more see
+                Documentation/devicetree/bindings/dma/dma.txt
+- dma-names   : DMA request names should be "rx" and "tx"
+
+Example:
+	crypto@fd45a000 {
+		compatible = "qcom,crypto-v5.1";
+		reg = <0xfd45a000 0x6000>;
+		clocks = <&gcc GCC_CE2_AHB_CLK>,
+			 <&gcc GCC_CE2_AXI_CLK>,
+			 <&gcc GCC_CE2_CLK>;
+		clock-names = "iface", "bus", "core";
+		dmas = <&cryptobam 2>, <&cryptobam 3>;
+		dma-names = "rx", "tx";
+	};

Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt

@@ -47,6 +47,7 @@ The full ID of peripheral types can be found below.
 	20	ASRC
 	21	ESAI
 	22	SSI Dual FIFO	(needs firmware ver >= 2)
+	23	Shared ASRC
 
 The third cell specifies the transfer priority as below.
 

Documentation/devicetree/bindings/dma/mpc512x-dma.txt

@@ -0,0 +1,29 @@
+* Freescale MPC512x and MPC8308 DMA Controller
+
+The DMA controller in Freescale MPC512x and MPC8308 SoCs can move
+blocks of memory contents between memory and peripherals or
+from memory to memory.
+
+Refer to "Generic DMA Controller and DMA request bindings" in
+the dma/dma.txt file for a more detailed description of binding.
+
+Required properties:
+- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma";
+- reg: should contain the DMA controller registers location and length;
+- interrupt for the DMA controller: syntax of interrupt client node
+	is described in interrupt-controller/interrupts.txt file.
+- #dma-cells: the length of the DMA specifier, must be <1>.
+	Each channel of this DMA controller has a peripheral request line,
+	the assignment is fixed in hardware. This one cell
+	in dmas property of a client device represents the channel number.
+
+Example:
+
+	dma0: dma@14000 {
+		compatible = "fsl,mpc5121-dma";
+		reg = <0x14000 0x1800>;
+		interrupts = <65 0x8>;
+		#dma-cells = <1>;
+	};
+
+DMA clients must use the format described in dma/dma.txt file.