Merge tag 'phy-for-4.14-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus

Kishon writes:

phy: for 4.14 -rc

 *) Handle error return values in rockchip-typec and tegra-xusb
 *) Fix MUX error check and ioremap_resource error check in mvebu-cp110-comphy
 *) Fix NULL pointer dereference error in phy-mtk-tphy
 *) Make sure pipe selector is not set to incompatible value
 *) Fix flaky aux channel communication with rockchip-typec PHY
 *) Fix DP monitors detection issue in rockchip-typec PHY

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

drivers/phy/marvell/phy-mvebu-cp110-comphy.c

@@ -111,6 +111,8 @@
 #define     MVEBU_COMPHY_CONF6_40B		BIT(18)
 #define MVEBU_COMPHY_SELECTOR			0x1140
 #define     MVEBU_COMPHY_SELECTOR_PHY(n)	((n) * 0x4)
+#define MVEBU_COMPHY_PIPE_SELECTOR		0x1144
+#define     MVEBU_COMPHY_PIPE_SELECTOR_PIPE(n)	((n) * 0x4)
 
 #define MVEBU_COMPHY_LANES	6
 #define MVEBU_COMPHY_PORTS	3
@@ -468,13 +470,17 @@ static int mvebu_comphy_power_on(struct phy *phy)
 {
 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
 	struct mvebu_comphy_priv *priv = lane->priv;
-	int ret;
-	u32 mux, val;
+	int ret, mux;
+	u32 val;
 
 	mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode);
 	if (mux < 0)
 		return -ENOTSUPP;
 
+	regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val);
+	val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id));
+	regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val);
+
 	regmap_read(priv->regmap, MVEBU_COMPHY_SELECTOR, &val);
 	val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id));
 	val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id);
@@ -526,6 +532,10 @@ static int mvebu_comphy_power_off(struct phy *phy)
 	val &= ~(0xf << MVEBU_COMPHY_SELECTOR_PHY(lane->id));
 	regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val);
 
+	regmap_read(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, &val);
+	val &= ~(0xf << MVEBU_COMPHY_PIPE_SELECTOR_PIPE(lane->id));
+	regmap_write(priv->regmap, MVEBU_COMPHY_PIPE_SELECTOR, val);
+
 	return 0;
 }
 
@@ -576,8 +586,8 @@ static int mvebu_comphy_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->regmap);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->base = devm_ioremap_resource(&pdev->dev, res);
-	if (!priv->base)
-		return -ENOMEM;
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
 
 	for_each_available_child_of_node(pdev->dev.of_node, child) {
 		struct mvebu_comphy_lane *lane;

drivers/phy/mediatek/phy-mtk-tphy.c

@@ -27,6 +27,7 @@
 /* banks shared by multiple phys */
 #define SSUSB_SIFSLV_V1_SPLLC		0x000	/* shared by u3 phys */
 #define SSUSB_SIFSLV_V1_U2FREQ		0x100	/* shared by u2 phys */
+#define SSUSB_SIFSLV_V1_CHIP		0x300	/* shared by u3 phys */
 /* u2 phy bank */
 #define SSUSB_SIFSLV_V1_U2PHY_COM	0x000
 /* u3/pcie/sata phy banks */
@@ -762,7 +763,7 @@ static void phy_v1_banks_init(struct mtk_tphy *tphy,
 	case PHY_TYPE_USB3:
 	case PHY_TYPE_PCIE:
 		u3_banks->spllc = tphy->sif_base + SSUSB_SIFSLV_V1_SPLLC;
-		u3_banks->chip = NULL;
+		u3_banks->chip = tphy->sif_base + SSUSB_SIFSLV_V1_CHIP;
 		u3_banks->phyd = instance->port_base + SSUSB_SIFSLV_V1_U3PHYD;
 		u3_banks->phya = instance->port_base + SSUSB_SIFSLV_V1_U3PHYA;
 		break;

drivers/phy/rockchip/phy-rockchip-typec.c

@@ -443,14 +443,34 @@ static inline int property_enable(struct rockchip_typec_phy *tcphy,
 	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
 }
 
+static void tcphy_dp_aux_set_flip(struct rockchip_typec_phy *tcphy)
+{
+	u16 tx_ana_ctrl_reg_1;
+
+	/*
+	 * Select the polarity of the xcvr:
+	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 0, Normal polarity (if TYPEC, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	if (!tcphy->flip)
+		tx_ana_ctrl_reg_1 |= BIT(12);
+	else
+		tx_ana_ctrl_reg_1 &= ~BIT(12);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+}
+
 static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 {
+	u16 tx_ana_ctrl_reg_1;
 	u16 rdata, rdata2, val;
 
 	/* disable txda_cal_latch_en for rewrite the calibration values */
-	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
-	val = rdata & 0xdfff;
-	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 &= ~BIT(13);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	/*
 	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
@@ -472,9 +492,8 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	 * Activate this signal for 1 clock cycle to sample new calibration
 	 * values.
 	 */
-	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
-	val = rdata | 0x2000;
-	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |= BIT(13);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 	usleep_range(150, 200);
 
 	/* set TX Voltage Level and TX Deemphasis to 0 */
@@ -482,8 +501,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	/* re-enable decap */
 	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
 	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
-	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
-	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |= BIT(3);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |= BIT(4);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
 
@@ -494,8 +515,10 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
 
 	/* re-enables Bandgap reference for LDO */
-	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
-	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |= BIT(7);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |= BIT(8);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	/*
 	 * re-enables the transmitter pre-driver, driver data selection MUX,
@@ -505,27 +528,26 @@ static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
 	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
 
 	/*
-	 * BIT 12: Controls auxda_polarity, which selects the polarity of the
-	 * xcvr:
-	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
-	 * down aux_m)
-	 * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
-	 * aux_p)
+	 * Do some magic undocumented stuff, some of which appears to
+	 * undo the "re-enables Bandgap reference for LDO" above.
 	 */
-	val = 0xa078;
-	if (!tcphy->flip)
-		val |= BIT(12);
-	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	tx_ana_ctrl_reg_1 |=  BIT(15);
+	tx_ana_ctrl_reg_1 &= ~BIT(8);
+	tx_ana_ctrl_reg_1 &= ~BIT(7);
+	tx_ana_ctrl_reg_1 |=  BIT(6);
+	tx_ana_ctrl_reg_1 |=  BIT(5);
+	writel(tx_ana_ctrl_reg_1, tcphy->base + TX_ANA_CTRL_REG_1);
 
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
 	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
 
 	/*
-	 * Controls low_power_swing_en, set the voltage swing of the driver
-	 * to 400mv. The values	below are peak to peak (differential) values.
+	 * Controls low_power_swing_en, don't set the voltage swing of the
+	 * driver to 400mv. The values below are peak to peak (differential)
+	 * values.
 	 */
-	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+	writel(0, tcphy->base + TXDA_COEFF_CALC_CTRL);
 	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
 
 	/* Controls tx_high_z_tm_en */
@@ -555,6 +577,7 @@ static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
 	reset_control_deassert(tcphy->tcphy_rst);
 
 	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+	tcphy_dp_aux_set_flip(tcphy);
 
 	tcphy_cfg_24m(tcphy);
 
@@ -685,8 +708,11 @@ static int rockchip_usb3_phy_power_on(struct phy *phy)
 	if (tcphy->mode == new_mode)
 		goto unlock_ret;
 
-	if (tcphy->mode == MODE_DISCONNECT)
-		tcphy_phy_init(tcphy, new_mode);
+	if (tcphy->mode == MODE_DISCONNECT) {
+		ret = tcphy_phy_init(tcphy, new_mode);
+		if (ret)
+			goto unlock_ret;
+	}
 
 	/* wait TCPHY for pipe ready */
 	for (timeout = 0; timeout < 100; timeout++) {
@@ -760,10 +786,12 @@ static int rockchip_dp_phy_power_on(struct phy *phy)
 	 */
 	if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
 		tcphy_phy_deinit(tcphy);
-		tcphy_phy_init(tcphy, new_mode);
+		ret = tcphy_phy_init(tcphy, new_mode);
 	} else if (tcphy->mode == MODE_DISCONNECT) {
-		tcphy_phy_init(tcphy, new_mode);
+		ret = tcphy_phy_init(tcphy, new_mode);
 	}
+	if (ret)
+		goto unlock_ret;
 
 	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
 				 val, val & DP_MODE_A2, 1000,

drivers/phy/tegra/xusb.c

@@ -454,6 +454,8 @@ tegra_xusb_find_port_node(struct tegra_xusb_padctl *padctl, const char *type,
 		char *name;
 
 		name = kasprintf(GFP_KERNEL, "%s-%u", type, index);
+		if (!name)
+			return ERR_PTR(-ENOMEM);
 		np = of_find_node_by_name(np, name);
 		kfree(name);
 	}