regmap: Add the DT binding documentation for endianness

Device-Tree binding for device endianness
Index     Device     Endianness properties
---------------------------------------------------
1         BE         'big-endian'
2         LE         'little-endian'

For one device driver, which will run in different scenarios above
on different SoCs using the devicetree, we need one way to simplify
this.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>

Documentation/devicetree/bindings/regmap/regmap.txt

@@ -0,0 +1,47 @@
+Device-Tree binding for regmap
+
+The endianness mode of CPU & Device scenarios:
+Index     Device     Endianness properties
+---------------------------------------------------
+1         BE         'big-endian'
+2         LE         'little-endian'
+
+For one device driver, which will run in different scenarios above
+on different SoCs using the devicetree, we need one way to simplify
+this.
+
+Required properties:
+- {big,little}-endian: these are boolean properties, if absent
+  meaning that the CPU and the Device are in the same endianness mode,
+  these properties are for register values and all the buffers only.
+
+Examples:
+Scenario 1 : CPU in LE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 2 : CPU in LE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      big-endian;
+};
+
+Scenario 3 : CPU in BE mode & device in BE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+};
+
+Scenario 4 : CPU in BE mode & device in LE mode.
+dev: dev@40031000 {
+	      compatible = "name";
+	      reg = <0x40031000 0x1000>;
+	      ...
+	      little-endian;
+};