ARM: restart: pxa: use new restart hook

Hook these platforms restart code into the new restart hook rather
than using arch_reset().

Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pxa/balloon3.c

@@ -829,4 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3")
 	.timer		= &pxa_timer,
 	.init_machine	= balloon3_init,
 	.atag_offset	= 0x100,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/capc7117.c

@@ -153,5 +153,6 @@ MACHINE_START(CAPC7117,
 	.init_irq = pxa3xx_init_irq,
 	.handle_irq = pxa3xx_handle_irq,
 	.timer = &pxa_timer,
-	.init_machine = capc7117_init
+	.init_machine = capc7117_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/cm-x2xx.c

@@ -524,4 +524,5 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
 #ifdef CONFIG_PCI
 	.dma_zone_size	= SZ_64M,
 #endif
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/cm-x300.c

@@ -858,4 +858,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
 	.timer		= &pxa_timer,
 	.init_machine	= cm_x300_init,
 	.fixup		= cm_x300_fixup,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/colibri-pxa270.c

@@ -313,6 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
@@ -322,5 +323,6 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/colibri-pxa300.c

@@ -189,5 +189,6 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/colibri-pxa320.c

@@ -259,5 +259,6 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/corgi.c

@@ -655,7 +655,7 @@ static void corgi_poweroff(void)
 		/* Green LED off tells the bootloader to halt */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
 
-	arm_machine_restart('h', NULL);
+	pxa_restart('h', NULL);
 }
 
 static void corgi_restart(char mode, const char *cmd)
@@ -664,13 +664,12 @@ static void corgi_restart(char mode, const char *cmd)
 		/* Green LED on tells the bootloader to reboot */
 		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
 
-	arm_machine_restart('h', cmd);
+	pxa_restart('h', cmd);
 }
 
 static void __init corgi_init(void)
 {
 	pm_power_off = corgi_poweroff;
-	arm_pm_restart = corgi_restart;
 
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
@@ -726,6 +725,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 
@@ -737,6 +737,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 
@@ -748,6 +749,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= corgi_init,
 	.timer		= &pxa_timer,
+	.restart	= corgi_restart,
 MACHINE_END
 #endif
 

arch/arm/mach-pxa/csb726.c

@@ -278,4 +278,5 @@ MACHINE_START(CSB726, "Cogent CSB726")
 	.handle_irq       = pxa27x_handle_irq,
 	.init_machine   = csb726_init,
 	.timer          = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/em-x270.c

@@ -1305,6 +1305,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(EXEDA, "Compulab eXeda")
@@ -1314,4 +1315,5 @@ MACHINE_START(EXEDA, "Compulab eXeda")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= em_x270_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/eseries.c

@@ -196,6 +196,7 @@ MACHINE_START(E330, "Toshiba e330")
 	.fixup		= eseries_fixup,
 	.init_machine	= e330_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -246,6 +247,7 @@ MACHINE_START(E350, "Toshiba e350")
 	.fixup		= eseries_fixup,
 	.init_machine	= e350_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -369,6 +371,7 @@ MACHINE_START(E400, "Toshiba e400")
 	.fixup		= eseries_fixup,
 	.init_machine	= e400_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -558,6 +561,7 @@ MACHINE_START(E740, "Toshiba e740")
 	.fixup		= eseries_fixup,
 	.init_machine	= e740_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -750,6 +754,7 @@ MACHINE_START(E750, "Toshiba e750")
 	.fixup		= eseries_fixup,
 	.init_machine	= e750_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -955,5 +960,6 @@ MACHINE_START(E800, "Toshiba e800")
 	.fixup		= eseries_fixup,
 	.init_machine	= e800_init,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/ezx.c

@@ -804,6 +804,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a780_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -870,6 +871,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e680_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -936,6 +938,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a1200_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1127,6 +1130,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = a910_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1193,6 +1197,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e6_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1233,5 +1238,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = e2_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/generic.h

@@ -57,3 +57,5 @@ void __init pxa_set_ffuart_info(void *info);
 void __init pxa_set_btuart_info(void *info);
 void __init pxa_set_stuart_info(void *info);
 void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(char, const char *);

arch/arm/mach-pxa/gumstix.c

@@ -239,4 +239,5 @@ MACHINE_START(GUMSTIX, "Gumstix")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= gumstix_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/h5000.c

@@ -209,4 +209,5 @@ MACHINE_START(H5400, "HP iPAQ H5000")
 	.handle_irq = pxa25x_handle_irq,
 	.timer = &pxa_timer,
 	.init_machine = h5000_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/himalaya.c

@@ -164,4 +164,5 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
 	.handle_irq = pxa25x_handle_irq,
 	.init_machine = himalaya_init,
 	.timer = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/hx4700.c

@@ -845,4 +845,5 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
 	.handle_irq     = pxa27x_handle_irq,
 	.init_machine = hx4700_init,
 	.timer        = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/icontrol.c

@@ -196,5 +196,6 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= icontrol_init
+	.init_machine	= icontrol_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/idp.c

@@ -199,4 +199,5 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/include/mach/system.h

@@ -9,15 +9,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-
-void arch_reset(char mode, const char *cmd);
+static inline void arch_reset(char mode, const char *cmd)
+{
+}

arch/arm/mach-pxa/littleton.c

@@ -445,4 +445,5 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= littleton_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/lpd270.c

@@ -505,4 +505,5 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lpd270_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/lubbock.c

@@ -556,4 +556,5 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= lubbock_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/magician.c

@@ -760,4 +760,5 @@ MACHINE_START(MAGICIAN, "HTC Magician")
 	.handle_irq = pxa27x_handle_irq,
 	.init_machine = magician_init,
 	.timer = &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/mainstone.c

@@ -622,4 +622,5 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= mainstone_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/mioa701.c

@@ -696,13 +696,13 @@ static void mioa701_machine_exit(void);
 static void mioa701_poweroff(void)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s', NULL);
+	pxa_restart('s', NULL);
 }
 
 static void mioa701_restart(char c, const char *cmd)
 {
 	mioa701_machine_exit();
-	arm_machine_restart('s', cmd);
+	pxa_restart('s', cmd);
 }
 
 static struct gpio global_gpios[] = {
@@ -734,7 +734,6 @@ static void __init mioa701_machine_init(void)
 	pxa_set_udc_info(&mioa701_udc_info);
 	pxa_set_ac97_info(&mioa701_ac97_info);
 	pm_power_off = mioa701_poweroff;
-	arm_pm_restart = mioa701_restart;
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	gsm_init();
 
@@ -758,4 +757,5 @@ MACHINE_START(MIOA701, "MIO A701")
 	.handle_irq	= &pxa27x_handle_irq,
 	.init_machine	= mioa701_machine_init,
 	.timer		= &pxa_timer,
+	.restart	= mioa701_restart,
 MACHINE_END

arch/arm/mach-pxa/mp900.c

@@ -98,5 +98,6 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.init_machine	= mp900c_init,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/palmld.c

@@ -347,5 +347,6 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmld_init
+	.init_machine	= palmld_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/palmt5.c

@@ -208,5 +208,6 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmt5_init
+	.init_machine	= palmt5_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/palmtc.c

@@ -542,5 +542,6 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmtc_init
+	.init_machine	= palmtc_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/palmte2.c

@@ -361,5 +361,6 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmte2_init
+	.init_machine	= palmte2_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/palmtreo.c

@@ -452,6 +452,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = treo680_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -464,5 +465,6 @@ MACHINE_START(CENTRO, "Palm Centro 685")
 	.handle_irq       = pxa27x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= centro_init,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/palmtx.c

@@ -369,5 +369,6 @@ MACHINE_START(PALMTX, "Palm T|X")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmtx_init
+	.init_machine	= palmtx_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/palmz72.c

@@ -404,5 +404,6 @@ MACHINE_START(PALMZ72, "Palm Zire72")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= palmz72_init
+	.init_machine	= palmz72_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/pcm027.c

@@ -265,4 +265,5 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= pcm027_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/poodle.c

@@ -417,7 +417,7 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = {
 
 static void poodle_poweroff(void)
 {
-	arm_machine_restart('h', NULL);
+	pxa_restart('h', NULL);
 }
 
 static void __init poodle_init(void)
@@ -466,4 +466,5 @@ MACHINE_START(POODLE, "SHARP Poodle")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= poodle_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/raumfeld.c

@@ -1093,6 +1093,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1104,6 +1105,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1115,5 +1117,6 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
 	.init_irq	= pxa3xx_init_irq,
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/reset.c

@@ -81,8 +81,11 @@ static void do_hw_reset(void)
 	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
 }
 
-void arch_reset(char mode, const char *cmd)
+void pxa_restart(char mode, const char *cmd)
 {
+	local_irq_disable();
+	local_fiq_disable();
+
 	clear_reset_status(RESET_STATUS_ALL);
 
 	switch (mode) {

arch/arm/mach-pxa/saar.c

@@ -602,4 +602,5 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saar_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/saarb.c

@@ -111,5 +111,6 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = saarb_init,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/spitz.c

@@ -926,7 +926,7 @@ static inline void spitz_i2c_init(void) {}
  ******************************************************************************/
 static void spitz_poweroff(void)
 {
-	arm_machine_restart('g', NULL);
+	pxa_restart('g', NULL);
 }
 
 static void spitz_restart(char mode, const char *cmd)
@@ -943,7 +943,6 @@ static void __init spitz_init(void)
 {
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
-	arm_pm_restart = spitz_restart;
 
 	PMCR = 0x00;
 
@@ -989,6 +988,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif
 
@@ -1001,6 +1001,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif
 
@@ -1013,5 +1014,6 @@ MACHINE_START(AKITA, "SHARP Akita")
 	.handle_irq	= pxa27x_handle_irq,
 	.init_machine	= spitz_init,
 	.timer		= &pxa_timer,
+	.restart	= spitz_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/stargate2.c

@@ -1005,6 +1005,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
 	.timer		= &pxa_timer,
 	.init_machine	= imote2_init,
 	.atag_offset	= 0x100,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif
 
@@ -1017,5 +1018,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
 	.timer = &pxa_timer,
 	.init_machine = stargate2_init,
 	.atag_offset = 0x100,
+	.restart	= pxa_restart,
 MACHINE_END
 #endif

arch/arm/mach-pxa/tavorevb.c

@@ -495,4 +495,5 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = tavorevb_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/tavorevb3.c

@@ -132,4 +132,5 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
 	.handle_irq       = pxa3xx_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine   = evb3_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/tosa.c

@@ -905,7 +905,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void tosa_poweroff(void)
 {
-	arm_machine_restart('g', NULL);
+	pxa_restart('g', NULL);
 }
 
 static void tosa_restart(char mode, const char *cmd)
@@ -935,7 +935,6 @@ static void __init tosa_init(void)
 	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
 
 	pm_power_off = tosa_poweroff;
-	arm_pm_restart = tosa_restart;
 
 	PCFR |= PCFR_OPDE;
 
@@ -978,4 +977,5 @@ MACHINE_START(TOSA, "SHARP Tosa")
 	.handle_irq       = pxa25x_handle_irq,
 	.init_machine   = tosa_init,
 	.timer          = &pxa_timer,
+	.restart	= tosa_restart,
 MACHINE_END

arch/arm/mach-pxa/trizeps4.c

@@ -561,6 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 
 MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
@@ -571,4 +572,5 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/viper.c

@@ -998,4 +998,5 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
 	.handle_irq	= pxa25x_handle_irq,
 	.timer          = &pxa_timer,
 	.init_machine	= viper_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/vpac270.c

@@ -721,5 +721,6 @@ MACHINE_START(VPAC270, "Voipac PXA270")
 	.init_irq	= pxa27x_init_irq,
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
-	.init_machine	= vpac270_init
+	.init_machine	= vpac270_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/xcep.c

@@ -185,5 +185,6 @@ MACHINE_START(XCEP, "Iskratel XCEP")
 	.init_irq	= pxa25x_init_irq,
 	.handle_irq	= pxa25x_handle_irq,
 	.timer		= &pxa_timer,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/z2.c

@@ -725,4 +725,5 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= z2_init,
+	.restart	= pxa_restart,
 MACHINE_END

arch/arm/mach-pxa/zeus.c

@@ -911,5 +911,6 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
 	.handle_irq	= pxa27x_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zeus_init,
+	.restart	= pxa_restart,
 MACHINE_END
 

arch/arm/mach-pxa/zylonite.c

@@ -430,4 +430,5 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
 	.handle_irq	= pxa3xx_handle_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= zylonite_init,
+	.restart	= pxa_restart,
 MACHINE_END