Merge branch 'akpm' (incoming from Andrew)

Merge second patch-bomb from Andrew Morton:
 - the rest of MM
 - zram updates
 - zswap updates
 - exit
 - procfs
 - exec
 - wait
 - crash dump
 - lib/idr
 - rapidio
 - adfs, affs, bfs, ufs
 - cris
 - Kconfig things
 - initramfs
 - small amount of IPC material
 - percpu enhancements
 - early ioremap support
 - various other misc things

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (156 commits)
  MAINTAINERS: update Intel C600 SAS driver maintainers
  fs/ufs: remove unused ufs_super_block_third pointer
  fs/ufs: remove unused ufs_super_block_second pointer
  fs/ufs: remove unused ufs_super_block_first pointer
  fs/ufs/super.c: add __init to init_inodecache()
  doc/kernel-parameters.txt: add early_ioremap_debug
  arm64: add early_ioremap support
  arm64: initialize pgprot info earlier in boot
  x86: use generic early_ioremap
  mm: create generic early_ioremap() support
  x86/mm: sparse warning fix for early_memremap
  lglock: map to spinlock when !CONFIG_SMP
  percpu: add preemption checks to __this_cpu ops
  vmstat: use raw_cpu_ops to avoid false positives on preemption checks
  slub: use raw_cpu_inc for incrementing statistics
  net: replace __this_cpu_inc in route.c with raw_cpu_inc
  modules: use raw_cpu_write for initialization of per cpu refcount.
  mm: use raw_cpu ops for determining current NUMA node
  percpu: add raw_cpu_ops
  slub: fix leak of 'name' in sysfs_slab_add
  ...

Documentation/ABI/testing/sysfs-block-zram

@@ -43,6 +43,36 @@ Description:
 		The invalid_io file is read-only and specifies the number of
 		non-page-size-aligned I/O requests issued to this device.
 
+What:		/sys/block/zram<id>/failed_reads
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The failed_reads file is read-only and specifies the number of
+		failed reads happened on this device.
+
+What:		/sys/block/zram<id>/failed_writes
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The failed_writes file is read-only and specifies the number of
+		failed writes happened on this device.
+
+What:		/sys/block/zram<id>/max_comp_streams
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The max_comp_streams file is read-write and specifies the
+		number of backend's zcomp_strm compression streams (number of
+		concurrent compress operations).
+
+What:		/sys/block/zram<id>/comp_algorithm
+Date:		February 2014
+Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
+Description:
+		The comp_algorithm file is read-write and lets to show
+		available and selected compression algorithms, change
+		compression algorithm selection.
+
 What:		/sys/block/zram<id>/notify_free
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>
@@ -53,15 +83,6 @@ Description:
 		is freed. This statistic is applicable only when this disk is
 		being used as a swap disk.
 
-What:		/sys/block/zram<id>/discard
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The discard file is read-only and specifies the number of
-		discard requests received by this device. These requests
-		provide information to block device regarding blocks which are
-		no longer used by filesystem.
-
 What:		/sys/block/zram<id>/zero_pages
 Date:		August 2010
 Contact:	Nitin Gupta <ngupta@vflare.org>

Documentation/DocBook/kernel-hacking.tmpl

@@ -671,7 +671,7 @@ printk(KERN_INFO "my ip: %pI4\n", &ipaddress);
 
   <sect1 id="routines-local-irqs">
    <title><function>local_irq_save()</function>/<function>local_irq_restore()</function>
-    <filename class="headerfile">include/asm/system.h</filename>
+    <filename class="headerfile">include/linux/irqflags.h</filename>
    </title>
 
    <para>

Documentation/arm64/memory.txt

@@ -39,7 +39,7 @@ ffffffbffa000000	ffffffbffaffffff	  16MB		PCI I/O space
 
 ffffffbffb000000	ffffffbffbbfffff	  12MB		[guard]
 
-ffffffbffbc00000	ffffffbffbdfffff	   2MB		earlyprintk device
+ffffffbffbc00000	ffffffbffbdfffff	   2MB		fixed mappings
 
 ffffffbffbe00000	ffffffbffbffffff	   2MB		[guard]
 
@@ -66,7 +66,7 @@ fffffdfffa000000	fffffdfffaffffff	  16MB		PCI I/O space
 
 fffffdfffb000000	fffffdfffbbfffff	  12MB		[guard]
 
-fffffdfffbc00000	fffffdfffbdfffff	   2MB		earlyprintk device
+fffffdfffbc00000	fffffdfffbdfffff	   2MB		fixed mappings
 
 fffffdfffbe00000	fffffdfffbffffff	   2MB		[guard]
 

Documentation/blockdev/zram.txt

@@ -21,7 +21,43 @@ Following shows a typical sequence of steps for using zram.
 	This creates 4 devices: /dev/zram{0,1,2,3}
 	(num_devices parameter is optional. Default: 1)
 
-2) Set Disksize
+2) Set max number of compression streams
+	Compression backend may use up to max_comp_streams compression streams,
+	thus allowing up to max_comp_streams concurrent compression operations.
+	By default, compression backend uses single compression stream.
+
+	Examples:
+	#show max compression streams number
+	cat /sys/block/zram0/max_comp_streams
+
+	#set max compression streams number to 3
+	echo 3 > /sys/block/zram0/max_comp_streams
+
+Note:
+In order to enable compression backend's multi stream support max_comp_streams
+must be initially set to desired concurrency level before ZRAM device
+initialisation. Once the device initialised as a single stream compression
+backend (max_comp_streams equals to 1), you will see error if you try to change
+the value of max_comp_streams because single stream compression backend
+implemented as a special case by lock overhead issue and does not support
+dynamic max_comp_streams. Only multi stream backend supports dynamic
+max_comp_streams adjustment.
+
+3) Select compression algorithm
+	Using comp_algorithm device attribute one can see available and
+	currently selected (shown in square brackets) compression algortithms,
+	change selected compression algorithm (once the device is initialised
+	there is no way to change compression algorithm).
+
+	Examples:
+	#show supported compression algorithms
+	cat /sys/block/zram0/comp_algorithm
+	lzo [lz4]
+
+	#select lzo compression algorithm
+	echo lzo > /sys/block/zram0/comp_algorithm
+
+4) Set Disksize
         Set disk size by writing the value to sysfs node 'disksize'.
         The value can be either in bytes or you can use mem suffixes.
         Examples:
@@ -33,32 +69,38 @@ Following shows a typical sequence of steps for using zram.
             echo 512M > /sys/block/zram0/disksize
             echo 1G > /sys/block/zram0/disksize
 
-3) Activate:
+Note:
+There is little point creating a zram of greater than twice the size of memory
+since we expect a 2:1 compression ratio. Note that zram uses about 0.1% of the
+size of the disk when not in use so a huge zram is wasteful.
+
+5) Activate:
 	mkswap /dev/zram0
 	swapon /dev/zram0
 
 	mkfs.ext4 /dev/zram1
 	mount /dev/zram1 /tmp
 
-4) Stats:
+6) Stats:
 	Per-device statistics are exported as various nodes under
 	/sys/block/zram<id>/
 		disksize
 		num_reads
 		num_writes
+		failed_reads
+		failed_writes
 		invalid_io
 		notify_free
-		discard
 		zero_pages
 		orig_data_size
 		compr_data_size
 		mem_used_total
 
-5) Deactivate:
+7) Deactivate:
 	swapoff /dev/zram0
 	umount /dev/zram1
 
-6) Reset:
+8) Reset:
 	Write any positive value to 'reset' sysfs node
 	echo 1 > /sys/block/zram0/reset
 	echo 1 > /sys/block/zram1/reset

Documentation/cgroups/memcg_test.txt

@@ -24,7 +24,7 @@ Please note that implementation details can be changed.
 
    a page/swp_entry may be charged (usage += PAGE_SIZE) at
 
-	mem_cgroup_newpage_charge()
+	mem_cgroup_charge_anon()
 	  Called at new page fault and Copy-On-Write.
 
 	mem_cgroup_try_charge_swapin()
@@ -32,7 +32,7 @@ Please note that implementation details can be changed.
 	  Followed by charge-commit-cancel protocol. (With swap accounting)
 	  At commit, a charge recorded in swap_cgroup is removed.
 
-	mem_cgroup_cache_charge()
+	mem_cgroup_charge_file()
 	  Called at add_to_page_cache()
 
 	mem_cgroup_cache_charge_swapin()

Documentation/cgroups/resource_counter.txt

@@ -76,15 +76,7 @@ to work with it.
 	limit_fail_at parameter is set to the particular res_counter element
 	where the charging failed.
 
- d. int res_counter_charge_locked
-			(struct res_counter *rc, unsigned long val, bool force)
-
-	The same as res_counter_charge(), but it must not acquire/release the
-	res_counter->lock internally (it must be called with res_counter->lock
-	held). The force parameter indicates whether we can bypass the limit.
-
- e. u64 res_counter_uncharge[_locked]
-			(struct res_counter *rc, unsigned long val)
+ d. u64 res_counter_uncharge(struct res_counter *rc, unsigned long val)
 
 	When a resource is released (freed) it should be de-accounted
 	from the resource counter it was accounted to.  This is called
@@ -93,7 +85,7 @@ to work with it.
 
 	The _locked routines imply that the res_counter->lock is taken.
 
- f. u64 res_counter_uncharge_until
+ e. u64 res_counter_uncharge_until
 		(struct res_counter *rc, struct res_counter *top,
 		 unsigned long val)
 

Documentation/filesystems/Locking

@@ -529,6 +529,7 @@ locking rules:
 open:		yes
 close:		yes
 fault:		yes		can return with page locked
+map_pages:	yes
 page_mkwrite:	yes		can return with page locked
 access:		yes
 
@@ -540,6 +541,15 @@ the page, then ensure it is not already truncated (the page lock will block
 subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
 locked. The VM will unlock the page.
 
+	->map_pages() is called when VM asks to map easy accessible pages.
+Filesystem should find and map pages associated with offsets from "pgoff"
+till "max_pgoff". ->map_pages() is called with page table locked and must
+not block.  If it's not possible to reach a page without blocking,
+filesystem should skip it. Filesystem should use do_set_pte() to setup
+page table entry. Pointer to entry associated with offset "pgoff" is
+passed in "pte" field in vm_fault structure. Pointers to entries for other
+offsets should be calculated relative to "pte".
+
 	->page_mkwrite() is called when a previously read-only pte is
 about to become writeable. The filesystem again must ensure that there are
 no truncate/invalidate races, and then return with the page locked. If

Documentation/filesystems/affs.txt

@@ -49,6 +49,10 @@ mode=mode	Sets the mode flags to the given (octal) value, regardless
 		This is useful since most of the plain AmigaOS files
 		will map to 600.
 
+nofilenametruncate
+		The file system will return an error when filename exceeds
+		standard maximum filename length (30 characters).
+
 reserved=num	Sets the number of reserved blocks at the start of the
 		partition to num. You should never need this option.
 		Default is 2.
@@ -181,9 +185,8 @@ tested, though several hundred MB have been read and written using
 this fs. For a most up-to-date list of bugs please consult
 fs/affs/Changes.
 
-Filenames are truncated to 30 characters without warning (this
-can be changed by setting the compile-time option AFFS_NO_TRUNCATE
-in include/linux/amigaffs.h).
+By default, filenames are truncated to 30 characters without warning.
+'nofilenametruncate' mount option can change that behavior.
 
 Case is ignored by the affs in filename matching, but Linux shells
 do care about the case. Example (with /wb being an affs mounted fs):

Documentation/filesystems/proc.txt

@@ -1648,18 +1648,21 @@ pids, so one need to either stop or freeze processes being inspected
 if precise results are needed.
 
 
-3.7	/proc/<pid>/fdinfo/<fd> - Information about opened file
+3.8	/proc/<pid>/fdinfo/<fd> - Information about opened file
 ---------------------------------------------------------------
 This file provides information associated with an opened file. The regular
-files have at least two fields -- 'pos' and 'flags'. The 'pos' represents
-the current offset of the opened file in decimal form [see lseek(2) for
-details] and 'flags' denotes the octal O_xxx mask the file has been
-created with [see open(2) for details].
+files have at least three fields -- 'pos', 'flags' and mnt_id. The 'pos'
+represents the current offset of the opened file in decimal form [see lseek(2)
+for details], 'flags' denotes the octal O_xxx mask the file has been
+created with [see open(2) for details] and 'mnt_id' represents mount ID of
+the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
+for details].
 
 A typical output is
 
 	pos:	0
 	flags:	0100002
+	mnt_id:	19
 
 The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
 pair provide additional information particular to the objects they represent.
@@ -1668,6 +1671,7 @@ pair provide additional information particular to the objects they represent.
 	~~~~~~~~~~~~~
 	pos:	0
 	flags:	04002
+	mnt_id:	9
 	eventfd-count:	5a
 
 	where 'eventfd-count' is hex value of a counter.
@@ -1676,6 +1680,7 @@ pair provide additional information particular to the objects they represent.
 	~~~~~~~~~~~~~~
 	pos:	0
 	flags:	04002
+	mnt_id:	9
 	sigmask:	0000000000000200
 
 	where 'sigmask' is hex value of the signal mask associated
@@ -1685,6 +1690,7 @@ pair provide additional information particular to the objects they represent.
 	~~~~~~~~~~~
 	pos:	0
 	flags:	02
+	mnt_id:	9
 	tfd:        5 events:       1d data: ffffffffffffffff
 
 	where 'tfd' is a target file descriptor number in decimal form,
@@ -1718,6 +1724,7 @@ pair provide additional information particular to the objects they represent.
 
 	pos:	0
 	flags:	02
+	mnt_id:	9
 	fanotify flags:10 event-flags:0
 	fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
 	fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4

Documentation/irqflags-tracing.txt

@@ -22,13 +22,6 @@ rather straightforward and risk-free manner.
 Architectures that want to support this need to do a couple of
 code-organizational changes first:
 
-- move their irq-flags manipulation code from their asm/system.h header
-  to asm/irqflags.h
-
-- rename local_irq_disable()/etc to raw_local_irq_disable()/etc. so that
-  the linux/irqflags.h code can inject callbacks and can construct the
-  real local_irq_disable()/etc APIs.
-
 - add and enable TRACE_IRQFLAGS_SUPPORT in their arch level Kconfig file
 
 and then a couple of functional changes are needed as well to implement

Documentation/kbuild/kconfig-language.txt

@@ -157,6 +157,10 @@ applicable everywhere (see syntax).
     to the build environment (if this is desired, it can be done via
     another symbol).
 
+  - "allnoconfig_y"
+    This declares the symbol as one that should have the value y when
+    using "allnoconfig". Used for symbols that hide other symbols.
+
 Menu dependencies
 -----------------
 

Documentation/kernel-parameters.txt

@@ -884,6 +884,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Enable debug messages at boot time.  See
 			Documentation/dynamic-debug-howto.txt for details.
 
+	early_ioremap_debug [KNL]
+			Enable debug messages in early_ioremap support. This
+			is useful for tracking down temporary early mappings
+			which are not unmapped.
+
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]

Documentation/rapidio/sysfs.txt

@@ -2,8 +2,8 @@
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-1. Device Subdirectories
-------------------------
+1. RapidIO Device Subdirectories
+--------------------------------
 
 For each RapidIO device, the RapidIO subsystem creates files in an individual
 subdirectory with the following name, /sys/bus/rapidio/devices/<device_name>.
@@ -25,8 +25,8 @@ seen by the enumerating host (destID = 1):
 NOTE: An enumerating or discovering endpoint does not create a sysfs entry for
 itself, this is why an endpoint with destID=1 is not shown in the list.
 
-2. Attributes Common for All Devices
-------------------------------------
+2. Attributes Common for All RapidIO Devices
+--------------------------------------------
 
 Each device subdirectory contains the following informational read-only files:
 
@@ -52,16 +52,16 @@ This attribute is similar in behavior to the "config" attribute of PCI devices
 and provides an access to the RapidIO device registers using standard file read
 and write operations.
 
-3. Endpoint Device Attributes
------------------------------
+3. RapidIO Endpoint Device Attributes
+-------------------------------------
 
 Currently Linux RapidIO subsystem does not create any endpoint specific sysfs
 attributes. It is possible that RapidIO master port drivers and endpoint device
 drivers will add their device-specific sysfs attributes but such attributes are
 outside the scope of this document.
 
-4. Switch Device Attributes
----------------------------
+4. RapidIO Switch Device Attributes
+-----------------------------------
 
 RapidIO switches have additional attributes in sysfs. RapidIO subsystem supports
 common and device-specific sysfs attributes for switches. Because switches are
@@ -106,3 +106,53 @@ attribute:
 	 for that controller always will be 0.
 	 To initiate RapidIO enumeration/discovery on all available mports
 	 a user must write '-1' (or RIO_MPORT_ANY) into this attribute file.
+
+
+6. RapidIO Bus Controllers/Ports
+--------------------------------
+
+On-chip RapidIO controllers and PCIe-to-RapidIO bridges (referenced as
+"Master Port" or "mport") are presented in sysfs as the special class of
+devices: "rapidio_port".
+
+The /sys/class/rapidio_port subdirectory contains individual subdirectories
+named as "rapidioN" where N = mport ID registered with RapidIO subsystem.
+
+NOTE: An mport ID is not a RapidIO destination ID assigned to a given local
+mport device.
+
+Each mport device subdirectory in addition to standard entries contains the
+following device-specific attributes:
+
+   port_destid - reports RapidIO destination ID assigned to the given RapidIO
+                 mport device. If value 0xFFFFFFFF is returned this means that
+                 no valid destination ID have been assigned to the mport (yet).
+                 Normally, before enumeration/discovery have been executed only
+                 fabric enumerating mports have a valid destination ID assigned
+                 to them using "hdid=..." rapidio module parameter.
+      sys_size - reports RapidIO common transport system size:
+                   0 = small (8-bit destination ID, max. 256 devices),
+                   1 = large (16-bit destination ID, max. 65536 devices).
+
+After enumeration or discovery was performed for a given mport device,
+the corresponding subdirectory will also contain subdirectories for each
+child RapidIO device connected to the mport. Naming conventions for RapidIO
+devices are described in Section 1 above.
+
+The example below shows mport device subdirectory with several child RapidIO
+devices attached to it.
+
+[rio@rapidio ~]$ ls /sys/class/rapidio_port/rapidio0/ -l
+total 0
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0001
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0004
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:e:0007
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0002
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0003
+drwxr-xr-x 3 root root    0 Feb 11 15:10 00:s:0005
+lrwxrwxrwx 1 root root    0 Feb 11 15:11 device -> ../../../0000:01:00.0
+-r--r--r-- 1 root root 4096 Feb 11 15:11 port_destid
+drwxr-xr-x 2 root root    0 Feb 11 15:11 power
+lrwxrwxrwx 1 root root    0 Feb 11 15:04 subsystem -> ../../../../../../class/rapidio_port
+-r--r--r-- 1 root root 4096 Feb 11 15:11 sys_size
+-rw-r--r-- 1 root root 4096 Feb 11 15:04 uevent

Documentation/scheduler/sched-arch.txt

@@ -8,7 +8,7 @@ Context switch
 By default, the switch_to arch function is called with the runqueue
 locked. This is usually not a problem unless switch_to may need to
 take the runqueue lock. This is usually due to a wake up operation in
-the context switch. See arch/ia64/include/asm/system.h for an example.
+the context switch. See arch/ia64/include/asm/switch_to.h for an example.
 
 To request the scheduler call switch_to with the runqueue unlocked,
 you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file

Documentation/sysctl/kernel.txt

@@ -317,6 +317,7 @@ for more than this value report a warning.
 This file shows up if CONFIG_DETECT_HUNG_TASK is enabled.
 
 0: means infinite timeout - no checking done.
+Possible values to set are in range {0..LONG_MAX/HZ}.
 
 ==============================================================
 

MAINTAINERS

@@ -4542,8 +4542,7 @@ K:	\b(ABS|SYN)_MT_
 
 INTEL C600 SERIES SAS CONTROLLER DRIVER
 M:	Intel SCU Linux support <intel-linux-scu@intel.com>
-M:	Lukasz Dorau <lukasz.dorau@intel.com>
-M:	Maciej Patelczyk <maciej.patelczyk@intel.com>
+M:	Artur Paszkiewicz <artur.paszkiewicz@intel.com>
 M:	Dave Jiang <dave.jiang@intel.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.code.sf.net/p/intel-sas/isci

arch/arc/Kconfig

@@ -57,7 +57,7 @@ config ARCH_FLATMEM_ENABLE
 config MMU
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config GENERIC_CALIBRATE_DELAY

arch/arm/Kconfig

@@ -126,7 +126,7 @@ config HAVE_TCM
 config HAVE_PROC_CPU
 	bool
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	bool
 
 config EISA
@@ -410,7 +410,7 @@ config ARCH_EBSA110
 	select ISA
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -428,7 +428,7 @@ config ARCH_EFM32
 	select CPU_V7M
 	select GENERIC_CLOCKEVENTS
 	select NO_DMA
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -677,7 +677,7 @@ config ARCH_SHMOBILE_LEGACY
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select MULTI_IRQ_HANDLER
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select PM_GENERIC_DOMAINS if PM
 	select SPARSE_IRQ
@@ -699,7 +699,7 @@ config ARCH_RPC
 	select ISA_DMA_API
 	select NEED_MACH_IO_H
 	select NEED_MACH_MEMORY_H
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select VIRT_TO_BUS
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
@@ -760,7 +760,7 @@ config ARCH_S3C64XX
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select HAVE_TCM
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_SAMSUNG
 	select PM_GENERIC_DOMAINS if PM
 	select S3C_DEV_NAND

arch/arm/mach-picoxcell/Kconfig

@@ -4,4 +4,4 @@ config ARCH_PICOXCELL
 	select ARM_VIC
 	select DW_APB_TIMER_OF
 	select HAVE_TCM
-	select NO_IOPORT
+	select NO_IOPORT_MAP

arch/arm/mach-prima2/Kconfig

@@ -3,7 +3,7 @@ config ARCH_SIRF
 	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_IRQ_CHIP
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select PINCTRL_SIRF
 	help

arch/arm/mach-s3c24xx/Kconfig

@@ -12,7 +12,7 @@ if ARCH_S3C24XX
 config PLAT_S3C24XX
 	def_bool y
 	select ARCH_REQUIRE_GPIOLIB
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select S3C_DEV_NAND
 	select IRQ_DOMAIN
 	help

arch/arm/mach-shmobile/Kconfig

@@ -10,7 +10,7 @@ config ARCH_SHMOBILE_MULTI
 	select ARM_GIC
 	select MIGHT_HAVE_PCI
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
 

arch/arm/mach-vexpress/Kconfig

@@ -10,7 +10,7 @@ config ARCH_VEXPRESS
 	select HAVE_ARM_TWD if SMP
 	select HAVE_PATA_PLATFORM
 	select ICST
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
 	select POWER_RESET

arch/arm/plat-samsung/Kconfig

@@ -9,7 +9,7 @@ config PLAT_SAMSUNG
 	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
 	default y
 	select GENERIC_IRQ_CHIP
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	help
 	  Base platform code for all Samsung SoC based systems
 
@@ -19,7 +19,7 @@ config PLAT_S5P
 	default y
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select PLAT_SAMSUNG
 	select S3C_GPIO_TRACK
 	select S5P_GPIO_DRVSTR

arch/arm64/Kconfig

@@ -17,6 +17,7 @@ config ARM64
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IOMAP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
@@ -66,7 +67,7 @@ config ARCH_PHYS_ADDR_T_64BIT
 config MMU
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config STACKTRACE_SUPPORT

arch/arm64/include/asm/Kbuild

@@ -10,6 +10,7 @@ generic-y += delay.h
 generic-y += div64.h
 generic-y += dma.h
 generic-y += emergency-restart.h
+generic-y += early_ioremap.h
 generic-y += errno.h
 generic-y += ftrace.h
 generic-y += hash.h

arch/arm64/include/asm/fixmap.h

@@ -0,0 +1,67 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ * Copyright (C) 2013 Mark Salter <msalter@redhat.com>
+ *
+ * Adapted from arch/x86_64 version.
+ *
+ */
+
+#ifndef _ASM_ARM64_FIXMAP_H
+#define _ASM_ARM64_FIXMAP_H
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/page.h>
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process.
+ *
+ * These 'compile-time allocated' memory buffers are
+ * page-sized. Use set_fixmap(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ */
+enum fixed_addresses {
+	FIX_EARLYCON_MEM_BASE,
+	__end_of_permanent_fixed_addresses,
+
+	/*
+	 * Temporary boot-time mappings, used by early_ioremap(),
+	 * before ioremap() is functional.
+	 */
+#ifdef CONFIG_ARM64_64K_PAGES
+#define NR_FIX_BTMAPS		4
+#else
+#define NR_FIX_BTMAPS		64
+#endif
+#define FIX_BTMAPS_SLOTS	7
+#define TOTAL_FIX_BTMAPS	(NR_FIX_BTMAPS * FIX_BTMAPS_SLOTS)
+
+	FIX_BTMAP_END = __end_of_permanent_fixed_addresses,
+	FIX_BTMAP_BEGIN = FIX_BTMAP_END + TOTAL_FIX_BTMAPS - 1,
+	__end_of_fixed_addresses
+};
+
+#define FIXADDR_SIZE	(__end_of_permanent_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define FIXMAP_PAGE_IO     __pgprot(PROT_DEVICE_nGnRE)
+
+extern void __early_set_fixmap(enum fixed_addresses idx,
+			       phys_addr_t phys, pgprot_t flags);
+
+#define __set_fixmap __early_set_fixmap
+
+#include <asm-generic/fixmap.h>
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_ARM64_FIXMAP_H */

arch/arm64/include/asm/io.h

@@ -27,6 +27,7 @@
 #include <asm/byteorder.h>
 #include <asm/barrier.h>
 #include <asm/pgtable.h>
+#include <asm/early_ioremap.h>
 
 #include <xen/xen.h>
 

arch/arm64/include/asm/memory.h

@@ -49,7 +49,7 @@
 #define PAGE_OFFSET		(UL(0xffffffffffffffff) << (VA_BITS - 1))
 #define MODULES_END		(PAGE_OFFSET)
 #define MODULES_VADDR		(MODULES_END - SZ_64M)
-#define EARLYCON_IOBASE		(MODULES_VADDR - SZ_4M)
+#define FIXADDR_TOP		(MODULES_VADDR - SZ_2M - PAGE_SIZE)
 #define TASK_SIZE_64		(UL(1) << VA_BITS)
 
 #ifdef CONFIG_COMPAT

arch/arm64/include/asm/mmu.h

@@ -27,5 +27,6 @@ typedef struct {
 extern void paging_init(void);
 extern void setup_mm_for_reboot(void);
 extern void __iomem *early_io_map(phys_addr_t phys, unsigned long virt);
+extern void init_mem_pgprot(void);
 
 #endif

arch/arm64/kernel/early_printk.c

@@ -26,6 +26,8 @@
 #include <linux/amba/serial.h>
 #include <linux/serial_reg.h>
 
+#include <asm/fixmap.h>
+
 static void __iomem *early_base;
 static void (*printch)(char ch);
 
@@ -141,8 +143,10 @@ static int __init setup_early_printk(char *buf)
 	}
 	/* no options parsing yet */
 
-	if (paddr)
-		early_base = early_io_map(paddr, EARLYCON_IOBASE);
+	if (paddr) {
+		set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr);
+		early_base = (void __iomem *)fix_to_virt(FIX_EARLYCON_MEM_BASE);
+	}
 
 	printch = match->printch;
 	early_console = &early_console_dev;

arch/arm64/kernel/head.S

@@ -404,7 +404,7 @@ ENDPROC(__calc_phys_offset)
  *   - identity mapping to enable the MMU (low address, TTBR0)
  *   - first few MB of the kernel linear mapping to jump to once the MMU has
  *     been enabled, including the FDT blob (TTBR1)
- *   - UART mapping if CONFIG_EARLY_PRINTK is enabled (TTBR1)
+ *   - pgd entry for fixed mappings (TTBR1)
  */
 __create_page_tables:
 	pgtbl	x25, x26, x24			// idmap_pg_dir and swapper_pg_dir addresses
@@ -461,15 +461,12 @@ __create_page_tables:
 	sub	x6, x6, #1			// inclusive range
 	create_block_map x0, x7, x3, x5, x6
 1:
-#ifdef CONFIG_EARLY_PRINTK
 	/*
-	 * Create the pgd entry for the UART mapping. The full mapping is done
-	 * later based earlyprintk kernel parameter.
+	 * Create the pgd entry for the fixed mappings.
 	 */
-	ldr	x5, =EARLYCON_IOBASE		// UART virtual address
+	ldr	x5, =FIXADDR_TOP		// Fixed mapping virtual address
 	add	x0, x26, #2 * PAGE_SIZE		// section table address
 	create_pgd_entry x26, x0, x5, x6, x7
-#endif
 	ret
 ENDPROC(__create_page_tables)
 	.ltorg

arch/arm64/kernel/setup.c

@@ -42,6 +42,7 @@
 #include <linux/of_fdt.h>
 #include <linux/of_platform.h>
 
+#include <asm/fixmap.h>
 #include <asm/cputype.h>
 #include <asm/elf.h>
 #include <asm/cputable.h>
@@ -360,6 +361,9 @@ void __init setup_arch(char **cmdline_p)
 
 	*cmdline_p = boot_command_line;
 
+	init_mem_pgprot();
+	early_ioremap_init();
+
 	parse_early_param();
 
 	arm64_memblock_init();

arch/arm64/mm/ioremap.c

@@ -25,6 +25,10 @@
 #include <linux/vmalloc.h>
 #include <linux/io.h>
 
+#include <asm/fixmap.h>
+#include <asm/tlbflush.h>
+#include <asm/pgalloc.h>
+
 static void __iomem *__ioremap_caller(phys_addr_t phys_addr, size_t size,
 				      pgprot_t prot, void *caller)
 {
@@ -98,3 +102,84 @@ void __iomem *ioremap_cache(phys_addr_t phys_addr, size_t size)
 				__builtin_return_address(0));
 }
 EXPORT_SYMBOL(ioremap_cache);
+
+#ifndef CONFIG_ARM64_64K_PAGES
+static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
+#endif
+
+static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
+{
+	pgd_t *pgd;
+	pud_t *pud;
+
+	pgd = pgd_offset_k(addr);
+	BUG_ON(pgd_none(*pgd) || pgd_bad(*pgd));
+
+	pud = pud_offset(pgd, addr);
+	BUG_ON(pud_none(*pud) || pud_bad(*pud));
+
+	return pmd_offset(pud, addr);
+}
+
+static inline pte_t * __init early_ioremap_pte(unsigned long addr)
+{
+	pmd_t *pmd = early_ioremap_pmd(addr);
+
+	BUG_ON(pmd_none(*pmd) || pmd_bad(*pmd));
+
+	return pte_offset_kernel(pmd, addr);
+}
+
+void __init early_ioremap_init(void)
+{
+	pmd_t *pmd;
+
+	pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
+#ifndef CONFIG_ARM64_64K_PAGES
+	/* need to populate pmd for 4k pagesize only */
+	pmd_populate_kernel(&init_mm, pmd, bm_pte);
+#endif
+	/*
+	 * The boot-ioremap range spans multiple pmds, for which
+	 * we are not prepared:
+	 */
+	BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
+		     != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
+
+	if (pmd != early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END))) {
+		WARN_ON(1);
+		pr_warn("pmd %p != %p\n",
+			pmd, early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END)));
+		pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
+			fix_to_virt(FIX_BTMAP_BEGIN));
+		pr_warn("fix_to_virt(FIX_BTMAP_END):   %08lx\n",
+			fix_to_virt(FIX_BTMAP_END));
+
+		pr_warn("FIX_BTMAP_END:       %d\n", FIX_BTMAP_END);
+		pr_warn("FIX_BTMAP_BEGIN:     %d\n",
+			FIX_BTMAP_BEGIN);
+	}
+
+	early_ioremap_setup();
+}
+
+void __init __early_set_fixmap(enum fixed_addresses idx,
+			       phys_addr_t phys, pgprot_t flags)
+{
+	unsigned long addr = __fix_to_virt(idx);
+	pte_t *pte;
+
+	if (idx >= __end_of_fixed_addresses) {
+		BUG();
+		return;
+	}
+
+	pte = early_ioremap_pte(addr);
+
+	if (pgprot_val(flags))
+		set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
+	else {
+		pte_clear(&init_mm, addr, pte);
+		flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
+	}
+}

arch/arm64/mm/mmu.c

@@ -125,7 +125,7 @@ early_param("cachepolicy", early_cachepolicy);
 /*
  * Adjust the PMD section entries according to the CPU in use.
  */
-static void __init init_mem_pgprot(void)
+void __init init_mem_pgprot(void)
 {
 	pteval_t default_pgprot;
 	int i;
@@ -260,47 +260,6 @@ static void __init create_mapping(phys_addr_t phys, unsigned long virt,
 	} while (pgd++, addr = next, addr != end);
 }
 
-#ifdef CONFIG_EARLY_PRINTK
-/*
- * Create an early I/O mapping using the pgd/pmd entries already populated
- * in head.S as this function is called too early to allocated any memory. The
- * mapping size is 2MB with 4KB pages or 64KB or 64KB pages.
- */
-void __iomem * __init early_io_map(phys_addr_t phys, unsigned long virt)
-{
-	unsigned long size, mask;
-	bool page64k = IS_ENABLED(CONFIG_ARM64_64K_PAGES);
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	/*
-	 * No early pte entries with !ARM64_64K_PAGES configuration, so using
-	 * sections (pmd).
-	 */
-	size = page64k ? PAGE_SIZE : SECTION_SIZE;
-	mask = ~(size - 1);
-
-	pgd = pgd_offset_k(virt);
-	pud = pud_offset(pgd, virt);
-	if (pud_none(*pud))
-		return NULL;
-	pmd = pmd_offset(pud, virt);
-
-	if (page64k) {
-		if (pmd_none(*pmd))
-			return NULL;
-		pte = pte_offset_kernel(pmd, virt);
-		set_pte(pte, __pte((phys & mask) | PROT_DEVICE_nGnRE));
-	} else {
-		set_pmd(pmd, __pmd((phys & mask) | PROT_SECT_DEVICE_nGnRE));
-	}
-
-	return (void __iomem *)((virt & mask) + (phys & ~mask));
-}
-#endif
-
 static void __init map_mem(void)
 {
 	struct memblock_region *reg;
@@ -357,7 +316,6 @@ void __init paging_init(void)
 {
 	void *zero_page;
 
-	init_mem_pgprot();
 	map_mem();
 
 	/*

arch/cris/Kconfig

@@ -29,7 +29,7 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config FORCE_MAX_ZONEORDER
@@ -138,6 +138,7 @@ config ETRAX_ARCH_V10
        bool
        default y if ETRAX100LX || ETRAX100LX_V2
        default n if !(ETRAX100LX || ETRAX100LX_V2)
+       select TTY
 
 config ETRAX_ARCH_V32
        bool

arch/cris/kernel/setup.c

@@ -165,6 +165,7 @@ void __init setup_arch(char **cmdline_p)
 	strcpy(init_utsname()->machine, cris_machine_name);
 }
 
+#ifdef CONFIG_PROC_FS
 static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	return *pos < nr_cpu_ids ? (void *)(int)(*pos + 1) : NULL;
@@ -188,6 +189,7 @@ const struct seq_operations cpuinfo_op = {
 	.stop  = c_stop,
 	.show  = show_cpuinfo,
 };
+#endif /* CONFIG_PROC_FS */
 
 static int __init topology_init(void)
 {

arch/hexagon/Kconfig

@@ -19,7 +19,7 @@ config HEXAGON
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select GENERIC_IOMAP
 	select GENERIC_SMP_IDLE_THREAD
 	select STACKTRACE_SUPPORT

arch/ia64/Kconfig

@@ -21,6 +21,7 @@ config IA64
 	select HAVE_FUNCTION_TRACER
 	select HAVE_DMA_ATTRS
 	select HAVE_KVM
+	select TTY
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
 	select HAVE_MEMBLOCK

arch/m32r/Kconfig

@@ -28,7 +28,7 @@ config ZONE_DMA
 	bool
 	default y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config NO_DMA

arch/m68k/Kconfig

@@ -52,7 +52,7 @@ config TIME_LOW_RES
 	bool
 	default y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config NO_DMA

arch/metag/Kconfig

@@ -52,7 +52,7 @@ config GENERIC_HWEIGHT
 config GENERIC_CALIBRATE_DELAY
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 source "init/Kconfig"

arch/mips/Kconfig

@@ -175,7 +175,7 @@ config MACH_DECSTATION
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select IRQ_CPU
 	select SYS_HAS_CPU_R3000
 	select SYS_HAS_CPU_R4X00
@@ -947,7 +947,7 @@ config SYNC_R4K
 config MIPS_MACHINE
 	def_bool n
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool n
 
 config GENERIC_ISA_DMA

arch/openrisc/Kconfig

@@ -41,7 +41,7 @@ config RWSEM_XCHGADD_ALGORITHM
 config GENERIC_HWEIGHT
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config TRACE_IRQFLAGS_SUPPORT

arch/powerpc/include/asm/fadump.h

@@ -210,7 +210,6 @@ extern int is_fadump_active(void);
 extern void crash_fadump(struct pt_regs *, const char *);
 extern void fadump_cleanup(void);
 
-extern void vmcore_cleanup(void);
 #else	/* CONFIG_FA_DUMP */
 static inline int is_fadump_active(void) { return 0; }
 static inline void crash_fadump(struct pt_regs *regs, const char *str) { }

arch/powerpc/platforms/Kconfig.cputype

@@ -73,6 +73,7 @@ config PPC_BOOK3S_64
 	select SYS_SUPPORTS_HUGETLBFS
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if PPC_64K_PAGES
 	select ARCH_SUPPORTS_NUMA_BALANCING
+	select IRQ_WORK
 
 config PPC_BOOK3E_64
 	bool "Embedded processors"

arch/powerpc/sysdev/fsl_rio.c

@@ -531,6 +531,7 @@ int fsl_rio_setup(struct platform_device *dev)
 		sprintf(port->name, "RIO mport %d", i);
 
 		priv->dev = &dev->dev;
+		port->dev.parent = &dev->dev;
 		port->ops = ops;
 		port->priv = priv;
 		port->phys_efptr = 0x100;

arch/s390/Kconfig

@@ -52,7 +52,7 @@ config KEXEC
 config AUDIT_ARCH
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool y
 
 config PCI_QUIRKS

arch/s390/mm/pgtable.c

@@ -505,6 +505,9 @@ static int gmap_connect_pgtable(unsigned long address, unsigned long segment,
 	if (!pmd_present(*pmd) &&
 	    __pte_alloc(mm, vma, pmd, vmaddr))
 		return -ENOMEM;
+	/* large pmds cannot yet be handled */
+	if (pmd_large(*pmd))
+		return -EFAULT;
 	/* pmd now points to a valid segment table entry. */
 	rmap = kmalloc(sizeof(*rmap), GFP_KERNEL|__GFP_REPEAT);
 	if (!rmap)

arch/sh/Kconfig

@@ -3,7 +3,7 @@ config SUPERH
 	select ARCH_MIGHT_HAVE_PC_PARPORT
 	select EXPERT
 	select CLKDEV_LOOKUP
-	select HAVE_IDE if HAS_IOPORT
+	select HAVE_IDE if HAS_IOPORT_MAP
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select ARCH_DISCARD_MEMBLOCK
@@ -138,7 +138,7 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	def_bool n
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool !PCI
 	depends on !SH_CAYMAN && !SH_SH4202_MICRODEV && !SH_SHMIN && \
 		   !SH_HP6XX && !SH_SOLUTION_ENGINE

arch/sh/boards/Kconfig

@@ -158,7 +158,7 @@ config SH_SDK7786
 	bool "SDK7786"
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
-	select NO_IOPORT if !PCI
+	select NO_IOPORT_MAP if !PCI
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_SRAM_POOL
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
@@ -204,7 +204,7 @@ config SH_URQUELL
 	depends on CPU_SUBTYPE_SH7786
 	select ARCH_REQUIRE_GPIOLIB
 	select SYS_SUPPORTS_PCI
-	select NO_IOPORT if !PCI
+	select NO_IOPORT_MAP if !PCI
 
 config SH_MIGOR
 	bool "Migo-R"
@@ -306,7 +306,7 @@ config SH_LBOX_RE2
 config SH_X3PROTO
 	bool "SH-X3 Prototype board"
 	depends on CPU_SUBTYPE_SHX3
-	select NO_IOPORT if !PCI
+	select NO_IOPORT_MAP if !PCI
 	select IRQ_DOMAIN
 
 config SH_MAGIC_PANEL_R2
@@ -333,7 +333,7 @@ config SH_POLARIS
 
 config SH_SH2007
 	bool "SH-2007 board"
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	depends on CPU_SUBTYPE_SH7780
 	help

arch/sh/include/asm/io.h

@@ -122,7 +122,7 @@ __BUILD_MEMORY_STRING(__raw_, l, u32)
 
 __BUILD_MEMORY_STRING(__raw_, q, u64)
 
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
 
 /*
  * Slowdown I/O port space accesses for antique hardware.
@@ -218,7 +218,7 @@ __BUILD_IOPORT_STRING(w, u16)
 __BUILD_IOPORT_STRING(l, u32)
 __BUILD_IOPORT_STRING(q, u64)
 
-#else /* !CONFIG_HAS_IOPORT */
+#else /* !CONFIG_HAS_IOPORT_MAP */
 
 #include <asm/io_noioport.h>
 

arch/sh/include/asm/io_trapped.h

@@ -36,7 +36,7 @@ __ioremap_trapped(unsigned long offset, unsigned long size)
 #define __ioremap_trapped(offset, size) NULL
 #endif
 
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
 extern struct list_head trapped_io;
 
 static inline void __iomem *

arch/sh/include/asm/machvec.h

@@ -21,7 +21,7 @@ struct sh_machine_vector {
 	int (*mv_irq_demux)(int irq);
 	void (*mv_init_irq)(void);
 
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
 	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
 	void (*mv_ioport_unmap)(void __iomem *);
 #endif

arch/sh/kernel/Makefile

@@ -22,7 +22,7 @@ obj-y	:= debugtraps.o dma-nommu.o dumpstack.o 		\
 
 ifndef CONFIG_GENERIC_IOMAP
 obj-y				+= iomap.o
-obj-$(CONFIG_HAS_IOPORT)	+= ioport.o
+obj-$(CONFIG_HAS_IOPORT_MAP)	+= ioport.o
 endif
 
 obj-$(CONFIG_SUPERH32)		+= sys_sh32.o

arch/sh/kernel/io_trapped.c

@@ -22,7 +22,7 @@
 
 #define TRAPPED_PAGES_MAX 16
 
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
 LIST_HEAD(trapped_io);
 EXPORT_SYMBOL_GPL(trapped_io);
 #endif
@@ -90,7 +90,7 @@ int register_trapped_io(struct trapped_io *tiop)
 	tiop->magic = IO_TRAPPED_MAGIC;
 	INIT_LIST_HEAD(&tiop->list);
 	spin_lock_irq(&trapped_lock);
-#ifdef CONFIG_HAS_IOPORT
+#ifdef CONFIG_HAS_IOPORT_MAP
 	if (flags & IORESOURCE_IO)
 		list_add(&tiop->list, &trapped_io);
 #endif

arch/tile/Kconfig

@@ -411,7 +411,7 @@ config PCI_DOMAINS
 config NO_IOMEM
 	def_bool !PCI
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool !PCI
 
 config TILE_PCI_IO

arch/um/kernel/process.c

@@ -359,7 +359,7 @@ int singlestepping(void * t)
 /*
  * Only x86 and x86_64 have an arch_align_stack().
  * All other arches have "#define arch_align_stack(x) (x)"
- * in their asm/system.h
+ * in their asm/exec.h
  * As this is included in UML from asm-um/system-generic.h,
  * we can use it to behave as the subarch does.
  */

arch/unicore32/Kconfig

@@ -27,7 +27,7 @@ config UNICORE32
 config GENERIC_CSUM
 	def_bool y
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	bool
 
 config STACKTRACE_SUPPORT

arch/unicore32/include/asm/mmu_context.h

@@ -14,6 +14,8 @@
 
 #include <linux/compiler.h>
 #include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmacache.h>
 #include <linux/io.h>
 
 #include <asm/cacheflush.h>
@@ -73,7 +75,7 @@ do { \
 		else \
 			mm->mmap = NULL; \
 		rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
-		mm->mmap_cache = NULL; \
+		vmacache_invalidate(mm); \
 		mm->map_count--; \
 		remove_vma(high_vma); \
 	} \

arch/x86/Kconfig

@@ -43,6 +43,7 @@ config X86
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_CONTIGUOUS if !SWIOTLB
 	select HAVE_KRETPROBES
+	select GENERIC_EARLY_IOREMAP
 	select HAVE_OPTPROBES
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_FTRACE_MCOUNT_RECORD

arch/x86/include/asm/Kbuild

@@ -5,5 +5,6 @@ genhdr-y += unistd_64.h
 genhdr-y += unistd_x32.h
 
 generic-y += clkdev.h
+generic-y += early_ioremap.h
 generic-y += cputime.h
 generic-y += mcs_spinlock.h

arch/x86/include/asm/bug.h

@@ -1,7 +1,6 @@
 #ifndef _ASM_X86_BUG_H
 #define _ASM_X86_BUG_H
 
-#ifdef CONFIG_BUG
 #define HAVE_ARCH_BUG
 
 #ifdef CONFIG_DEBUG_BUGVERBOSE
@@ -33,8 +32,6 @@ do {								\
 } while (0)
 #endif
 
-#endif /* !CONFIG_BUG */
-
 #include <asm-generic/bug.h>
 
 #endif /* _ASM_X86_BUG_H */

arch/x86/include/asm/fixmap.h

@@ -163,5 +163,11 @@ static inline void __set_fixmap(enum fixed_addresses idx,
 
 #include <asm-generic/fixmap.h>
 
+#define __late_set_fixmap(idx, phys, flags) __set_fixmap(idx, phys, flags)
+#define __late_clear_fixmap(idx) __set_fixmap(idx, 0, __pgprot(0))
+
+void __early_set_fixmap(enum fixed_addresses idx,
+			phys_addr_t phys, pgprot_t flags);
+
 #endif /* !__ASSEMBLY__ */
 #endif /* _ASM_X86_FIXMAP_H */

arch/x86/include/asm/io.h

@@ -39,6 +39,7 @@
 #include <linux/string.h>
 #include <linux/compiler.h>
 #include <asm/page.h>
+#include <asm/early_ioremap.h>
 
 #define build_mmio_read(name, size, type, reg, barrier) \
 static inline type name(const volatile void __iomem *addr) \
@@ -316,19 +317,6 @@ extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
 				unsigned long prot_val);
 extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size);
 
-/*
- * early_ioremap() and early_iounmap() are for temporary early boot-time
- * mappings, before the real ioremap() is functional.
- * A boot-time mapping is currently limited to at most 16 pages.
- */
-extern void early_ioremap_init(void);
-extern void early_ioremap_reset(void);
-extern void __iomem *early_ioremap(resource_size_t phys_addr,
-				   unsigned long size);
-extern void __iomem *early_memremap(resource_size_t phys_addr,
-				    unsigned long size);
-extern void early_iounmap(void __iomem *addr, unsigned long size);
-extern void fixup_early_ioremap(void);
 extern bool is_early_ioremap_ptep(pte_t *ptep);
 
 #ifdef CONFIG_XEN

arch/x86/include/asm/percpu.h

@@ -52,7 +52,7 @@
  * Compared to the generic __my_cpu_offset version, the following
  * saves one instruction and avoids clobbering a temp register.
  */
-#define __this_cpu_ptr(ptr)				\
+#define raw_cpu_ptr(ptr)				\
 ({							\
 	unsigned long tcp_ptr__;			\
 	__verify_pcpu_ptr(ptr);				\
@@ -362,25 +362,25 @@ do {									\
  */
 #define this_cpu_read_stable(var)	percpu_from_op("mov", var, "p" (&(var)))
 
-#define __this_cpu_read_1(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
-#define __this_cpu_read_2(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
-#define __this_cpu_read_4(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
-
-#define __this_cpu_write_1(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_write_2(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_write_4(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_add_1(pcp, val)	percpu_add_op((pcp), val)
-#define __this_cpu_add_2(pcp, val)	percpu_add_op((pcp), val)
-#define __this_cpu_add_4(pcp, val)	percpu_add_op((pcp), val)
-#define __this_cpu_and_1(pcp, val)	percpu_to_op("and", (pcp), val)
-#define __this_cpu_and_2(pcp, val)	percpu_to_op("and", (pcp), val)
-#define __this_cpu_and_4(pcp, val)	percpu_to_op("and", (pcp), val)
-#define __this_cpu_or_1(pcp, val)	percpu_to_op("or", (pcp), val)
-#define __this_cpu_or_2(pcp, val)	percpu_to_op("or", (pcp), val)
-#define __this_cpu_or_4(pcp, val)	percpu_to_op("or", (pcp), val)
-#define __this_cpu_xchg_1(pcp, val)	percpu_xchg_op(pcp, val)
-#define __this_cpu_xchg_2(pcp, val)	percpu_xchg_op(pcp, val)
-#define __this_cpu_xchg_4(pcp, val)	percpu_xchg_op(pcp, val)
+#define raw_cpu_read_1(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
+#define raw_cpu_read_2(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
+#define raw_cpu_read_4(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
+
+#define raw_cpu_write_1(pcp, val)	percpu_to_op("mov", (pcp), val)
+#define raw_cpu_write_2(pcp, val)	percpu_to_op("mov", (pcp), val)
+#define raw_cpu_write_4(pcp, val)	percpu_to_op("mov", (pcp), val)
+#define raw_cpu_add_1(pcp, val)		percpu_add_op((pcp), val)
+#define raw_cpu_add_2(pcp, val)		percpu_add_op((pcp), val)
+#define raw_cpu_add_4(pcp, val)		percpu_add_op((pcp), val)
+#define raw_cpu_and_1(pcp, val)		percpu_to_op("and", (pcp), val)
+#define raw_cpu_and_2(pcp, val)		percpu_to_op("and", (pcp), val)
+#define raw_cpu_and_4(pcp, val)		percpu_to_op("and", (pcp), val)
+#define raw_cpu_or_1(pcp, val)		percpu_to_op("or", (pcp), val)
+#define raw_cpu_or_2(pcp, val)		percpu_to_op("or", (pcp), val)
+#define raw_cpu_or_4(pcp, val)		percpu_to_op("or", (pcp), val)
+#define raw_cpu_xchg_1(pcp, val)	percpu_xchg_op(pcp, val)
+#define raw_cpu_xchg_2(pcp, val)	percpu_xchg_op(pcp, val)
+#define raw_cpu_xchg_4(pcp, val)	percpu_xchg_op(pcp, val)
 
 #define this_cpu_read_1(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
 #define this_cpu_read_2(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
@@ -401,16 +401,16 @@ do {									\
 #define this_cpu_xchg_2(pcp, nval)	percpu_xchg_op(pcp, nval)
 #define this_cpu_xchg_4(pcp, nval)	percpu_xchg_op(pcp, nval)
 
-#define __this_cpu_add_return_1(pcp, val) percpu_add_return_op(pcp, val)
-#define __this_cpu_add_return_2(pcp, val) percpu_add_return_op(pcp, val)
-#define __this_cpu_add_return_4(pcp, val) percpu_add_return_op(pcp, val)
-#define __this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
-#define __this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
-#define __this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define raw_cpu_add_return_1(pcp, val)		percpu_add_return_op(pcp, val)
+#define raw_cpu_add_return_2(pcp, val)		percpu_add_return_op(pcp, val)
+#define raw_cpu_add_return_4(pcp, val)		percpu_add_return_op(pcp, val)
+#define raw_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define raw_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+#define raw_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 
-#define this_cpu_add_return_1(pcp, val)	percpu_add_return_op(pcp, val)
-#define this_cpu_add_return_2(pcp, val)	percpu_add_return_op(pcp, val)
-#define this_cpu_add_return_4(pcp, val)	percpu_add_return_op(pcp, val)
+#define this_cpu_add_return_1(pcp, val)		percpu_add_return_op(pcp, val)
+#define this_cpu_add_return_2(pcp, val)		percpu_add_return_op(pcp, val)
+#define this_cpu_add_return_4(pcp, val)		percpu_add_return_op(pcp, val)
 #define this_cpu_cmpxchg_1(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 #define this_cpu_cmpxchg_2(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 #define this_cpu_cmpxchg_4(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
@@ -427,7 +427,7 @@ do {									\
 	__ret;								\
 })
 
-#define __this_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
+#define raw_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
 #define this_cpu_cmpxchg_double_4	percpu_cmpxchg8b_double
 #endif /* CONFIG_X86_CMPXCHG64 */
 
@@ -436,22 +436,22 @@ do {									\
  * 32 bit must fall back to generic operations.
  */
 #ifdef CONFIG_X86_64
-#define __this_cpu_read_8(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
-#define __this_cpu_write_8(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define __this_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
-#define __this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
-#define __this_cpu_or_8(pcp, val)	percpu_to_op("or", (pcp), val)
-#define __this_cpu_add_return_8(pcp, val) percpu_add_return_op(pcp, val)
-#define __this_cpu_xchg_8(pcp, nval)	percpu_xchg_op(pcp, nval)
-#define __this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
-
-#define this_cpu_read_8(pcp)		percpu_from_op("mov", (pcp), "m"(pcp))
-#define this_cpu_write_8(pcp, val)	percpu_to_op("mov", (pcp), val)
-#define this_cpu_add_8(pcp, val)	percpu_add_op((pcp), val)
-#define this_cpu_and_8(pcp, val)	percpu_to_op("and", (pcp), val)
-#define this_cpu_or_8(pcp, val)		percpu_to_op("or", (pcp), val)
-#define this_cpu_add_return_8(pcp, val)	percpu_add_return_op(pcp, val)
-#define this_cpu_xchg_8(pcp, nval)	percpu_xchg_op(pcp, nval)
+#define raw_cpu_read_8(pcp)			percpu_from_op("mov", (pcp), "m"(pcp))
+#define raw_cpu_write_8(pcp, val)		percpu_to_op("mov", (pcp), val)
+#define raw_cpu_add_8(pcp, val)			percpu_add_op((pcp), val)
+#define raw_cpu_and_8(pcp, val)			percpu_to_op("and", (pcp), val)
+#define raw_cpu_or_8(pcp, val)			percpu_to_op("or", (pcp), val)
+#define raw_cpu_add_return_8(pcp, val)		percpu_add_return_op(pcp, val)
+#define raw_cpu_xchg_8(pcp, nval)		percpu_xchg_op(pcp, nval)
+#define raw_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
+
+#define this_cpu_read_8(pcp)			percpu_from_op("mov", (pcp), "m"(pcp))
+#define this_cpu_write_8(pcp, val)		percpu_to_op("mov", (pcp), val)
+#define this_cpu_add_8(pcp, val)		percpu_add_op((pcp), val)
+#define this_cpu_and_8(pcp, val)		percpu_to_op("and", (pcp), val)
+#define this_cpu_or_8(pcp, val)			percpu_to_op("or", (pcp), val)
+#define this_cpu_add_return_8(pcp, val)		percpu_add_return_op(pcp, val)
+#define this_cpu_xchg_8(pcp, nval)		percpu_xchg_op(pcp, nval)
 #define this_cpu_cmpxchg_8(pcp, oval, nval)	percpu_cmpxchg_op(pcp, oval, nval)
 
 /*
@@ -474,7 +474,7 @@ do {									\
 	__ret;								\
 })
 
-#define __this_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
+#define raw_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
 #define this_cpu_cmpxchg_double_8	percpu_cmpxchg16b_double
 
 #endif
@@ -495,9 +495,9 @@ static __always_inline int x86_this_cpu_constant_test_bit(unsigned int nr,
 	unsigned long __percpu *a = (unsigned long *)addr + nr / BITS_PER_LONG;
 
 #ifdef CONFIG_X86_64
-	return ((1UL << (nr % BITS_PER_LONG)) & __this_cpu_read_8(*a)) != 0;
+	return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_8(*a)) != 0;
 #else
-	return ((1UL << (nr % BITS_PER_LONG)) & __this_cpu_read_4(*a)) != 0;
+	return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_4(*a)) != 0;
 #endif
 }
 

arch/x86/include/asm/preempt.h

@@ -19,12 +19,12 @@ DECLARE_PER_CPU(int, __preempt_count);
  */
 static __always_inline int preempt_count(void)
 {
-	return __this_cpu_read_4(__preempt_count) & ~PREEMPT_NEED_RESCHED;
+	return raw_cpu_read_4(__preempt_count) & ~PREEMPT_NEED_RESCHED;
 }
 
 static __always_inline void preempt_count_set(int pc)
 {
-	__this_cpu_write_4(__preempt_count, pc);
+	raw_cpu_write_4(__preempt_count, pc);
 }
 
 /*
@@ -53,17 +53,17 @@ static __always_inline void preempt_count_set(int pc)
 
 static __always_inline void set_preempt_need_resched(void)
 {
-	__this_cpu_and_4(__preempt_count, ~PREEMPT_NEED_RESCHED);
+	raw_cpu_and_4(__preempt_count, ~PREEMPT_NEED_RESCHED);
 }
 
 static __always_inline void clear_preempt_need_resched(void)
 {
-	__this_cpu_or_4(__preempt_count, PREEMPT_NEED_RESCHED);
+	raw_cpu_or_4(__preempt_count, PREEMPT_NEED_RESCHED);
 }
 
 static __always_inline bool test_preempt_need_resched(void)
 {
-	return !(__this_cpu_read_4(__preempt_count) & PREEMPT_NEED_RESCHED);
+	return !(raw_cpu_read_4(__preempt_count) & PREEMPT_NEED_RESCHED);
 }
 
 /*
@@ -72,12 +72,12 @@ static __always_inline bool test_preempt_need_resched(void)
 
 static __always_inline void __preempt_count_add(int val)
 {
-	__this_cpu_add_4(__preempt_count, val);
+	raw_cpu_add_4(__preempt_count, val);
 }
 
 static __always_inline void __preempt_count_sub(int val)
 {
-	__this_cpu_add_4(__preempt_count, -val);
+	raw_cpu_add_4(__preempt_count, -val);
 }
 
 /*
@@ -95,7 +95,7 @@ static __always_inline bool __preempt_count_dec_and_test(void)
  */
 static __always_inline bool should_resched(void)
 {
-	return unlikely(!__this_cpu_read_4(__preempt_count));
+	return unlikely(!raw_cpu_read_4(__preempt_count));
 }
 
 #ifdef CONFIG_PREEMPT

arch/x86/mm/ioremap.c

@@ -328,17 +328,6 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr)
 	return;
 }
 
-static int __initdata early_ioremap_debug;
-
-static int __init early_ioremap_debug_setup(char *str)
-{
-	early_ioremap_debug = 1;
-
-	return 0;
-}
-early_param("early_ioremap_debug", early_ioremap_debug_setup);
-
-static __initdata int after_paging_init;
 static pte_t bm_pte[PAGE_SIZE/sizeof(pte_t)] __page_aligned_bss;
 
 static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
@@ -362,18 +351,11 @@ bool __init is_early_ioremap_ptep(pte_t *ptep)
 	return ptep >= &bm_pte[0] && ptep < &bm_pte[PAGE_SIZE/sizeof(pte_t)];
 }
 
-static unsigned long slot_virt[FIX_BTMAPS_SLOTS] __initdata;
-
 void __init early_ioremap_init(void)
 {
 	pmd_t *pmd;
-	int i;
 
-	if (early_ioremap_debug)
-		printk(KERN_INFO "early_ioremap_init()\n");
-
-	for (i = 0; i < FIX_BTMAPS_SLOTS; i++)
-		slot_virt[i] = __fix_to_virt(FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*i);
+	early_ioremap_setup();
 
 	pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN));
 	memset(bm_pte, 0, sizeof(bm_pte));
@@ -402,13 +384,8 @@ void __init early_ioremap_init(void)
 	}
 }
 
-void __init early_ioremap_reset(void)
-{
-	after_paging_init = 1;
-}
-
-static void __init __early_set_fixmap(enum fixed_addresses idx,
-				      phys_addr_t phys, pgprot_t flags)
+void __init __early_set_fixmap(enum fixed_addresses idx,
+			       phys_addr_t phys, pgprot_t flags)
 {
 	unsigned long addr = __fix_to_virt(idx);
 	pte_t *pte;
@@ -425,198 +402,3 @@ static void __init __early_set_fixmap(enum fixed_addresses idx,
 		pte_clear(&init_mm, addr, pte);
 	__flush_tlb_one(addr);
 }
-
-static inline void __init early_set_fixmap(enum fixed_addresses idx,
-					   phys_addr_t phys, pgprot_t prot)
-{
-	if (after_paging_init)
-		__set_fixmap(idx, phys, prot);
-	else
-		__early_set_fixmap(idx, phys, prot);
-}
-
-static inline void __init early_clear_fixmap(enum fixed_addresses idx)
-{
-	if (after_paging_init)
-		clear_fixmap(idx);
-	else
-		__early_set_fixmap(idx, 0, __pgprot(0));
-}
-
-static void __iomem *prev_map[FIX_BTMAPS_SLOTS] __initdata;
-static unsigned long prev_size[FIX_BTMAPS_SLOTS] __initdata;
-
-void __init fixup_early_ioremap(void)
-{
-	int i;
-
-	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
-		if (prev_map[i]) {
-			WARN_ON(1);
-			break;
-		}
-	}
-
-	early_ioremap_init();
-}
-
-static int __init check_early_ioremap_leak(void)
-{
-	int count = 0;
-	int i;
-
-	for (i = 0; i < FIX_BTMAPS_SLOTS; i++)
-		if (prev_map[i])
-			count++;
-
-	if (!count)
-		return 0;
-	WARN(1, KERN_WARNING
-	       "Debug warning: early ioremap leak of %d areas detected.\n",
-		count);
-	printk(KERN_WARNING
-		"please boot with early_ioremap_debug and report the dmesg.\n");
-
-	return 1;
-}
-late_initcall(check_early_ioremap_leak);
-
-static void __init __iomem *
-__early_ioremap(resource_size_t phys_addr, unsigned long size, pgprot_t prot)
-{
-	unsigned long offset;
-	resource_size_t last_addr;
-	unsigned int nrpages;
-	enum fixed_addresses idx;
-	int i, slot;
-
-	WARN_ON(system_state != SYSTEM_BOOTING);
-
-	slot = -1;
-	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
-		if (!prev_map[i]) {
-			slot = i;
-			break;
-		}
-	}
-
-	if (slot < 0) {
-		printk(KERN_INFO "%s(%08llx, %08lx) not found slot\n",
-		       __func__, (u64)phys_addr, size);
-		WARN_ON(1);
-		return NULL;
-	}
-
-	if (early_ioremap_debug) {
-		printk(KERN_INFO "%s(%08llx, %08lx) [%d] => ",
-		       __func__, (u64)phys_addr, size, slot);
-		dump_stack();
-	}
-
-	/* Don't allow wraparound or zero size */
-	last_addr = phys_addr + size - 1;
-	if (!size || last_addr < phys_addr) {
-		WARN_ON(1);
-		return NULL;
-	}
-
-	prev_size[slot] = size;
-	/*
-	 * Mappings have to be page-aligned
-	 */
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-	size = PAGE_ALIGN(last_addr + 1) - phys_addr;
-
-	/*
-	 * Mappings have to fit in the FIX_BTMAP area.
-	 */
-	nrpages = size >> PAGE_SHIFT;
-	if (nrpages > NR_FIX_BTMAPS) {
-		WARN_ON(1);
-		return NULL;
-	}
-
-	/*
-	 * Ok, go for it..
-	 */
-	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
-	while (nrpages > 0) {
-		early_set_fixmap(idx, phys_addr, prot);
-		phys_addr += PAGE_SIZE;
-		--idx;
-		--nrpages;
-	}
-	if (early_ioremap_debug)
-		printk(KERN_CONT "%08lx + %08lx\n", offset, slot_virt[slot]);
-
-	prev_map[slot] = (void __iomem *)(offset + slot_virt[slot]);
-	return prev_map[slot];
-}
-
-/* Remap an IO device */
-void __init __iomem *
-early_ioremap(resource_size_t phys_addr, unsigned long size)
-{
-	return __early_ioremap(phys_addr, size, PAGE_KERNEL_IO);
-}
-
-/* Remap memory */
-void __init __iomem *
-early_memremap(resource_size_t phys_addr, unsigned long size)
-{
-	return __early_ioremap(phys_addr, size, PAGE_KERNEL);
-}
-
-void __init early_iounmap(void __iomem *addr, unsigned long size)
-{
-	unsigned long virt_addr;
-	unsigned long offset;
-	unsigned int nrpages;
-	enum fixed_addresses idx;
-	int i, slot;
-
-	slot = -1;
-	for (i = 0; i < FIX_BTMAPS_SLOTS; i++) {
-		if (prev_map[i] == addr) {
-			slot = i;
-			break;
-		}
-	}
-
-	if (slot < 0) {
-		printk(KERN_INFO "early_iounmap(%p, %08lx) not found slot\n",
-			 addr, size);
-		WARN_ON(1);
-		return;
-	}
-
-	if (prev_size[slot] != size) {
-		printk(KERN_INFO "early_iounmap(%p, %08lx) [%d] size not consistent %08lx\n",
-			 addr, size, slot, prev_size[slot]);
-		WARN_ON(1);
-		return;
-	}
-
-	if (early_ioremap_debug) {
-		printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
-		       size, slot);
-		dump_stack();
-	}
-
-	virt_addr = (unsigned long)addr;
-	if (virt_addr < fix_to_virt(FIX_BTMAP_BEGIN)) {
-		WARN_ON(1);
-		return;
-	}
-	offset = virt_addr & ~PAGE_MASK;
-	nrpages = PAGE_ALIGN(offset + size) >> PAGE_SHIFT;
-
-	idx = FIX_BTMAP_BEGIN - NR_FIX_BTMAPS*slot;
-	while (nrpages > 0) {
-		early_clear_fixmap(idx);
-		--idx;
-		--nrpages;
-	}
-	prev_map[slot] = NULL;
-}

arch/x86/mm/pgtable_32.c

@@ -127,7 +127,7 @@ static int __init parse_reservetop(char *arg)
 
 	address = memparse(arg, &arg);
 	reserve_top_address(address);
-	fixup_early_ioremap();
+	early_ioremap_init();
 	return 0;
 }
 early_param("reservetop", parse_reservetop);

arch/xtensa/Kconfig

@@ -41,7 +41,7 @@ config ARCH_HAS_ILOG2_U32
 config ARCH_HAS_ILOG2_U64
 	def_bool n
 
-config NO_IOPORT
+config NO_IOPORT_MAP
 	def_bool n
 
 config HZ
@@ -239,7 +239,7 @@ config XTENSA_PLATFORM_XT2000
 config XTENSA_PLATFORM_S6105
 	bool "S6105"
 	select SERIAL_CONSOLE
-	select NO_IOPORT
+	select NO_IOPORT_MAP
 
 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"

arch/xtensa/configs/iss_defconfig

@@ -11,7 +11,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT=y
+CONFIG_NO_IOPORT_MAP=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y

arch/xtensa/configs/s6105_defconfig

@@ -11,7 +11,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_NO_IOPORT=y
+CONFIG_NO_IOPORT_MAP=y
 CONFIG_HZ=100
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 

drivers/block/zram/Kconfig

@@ -15,6 +15,16 @@ config ZRAM
 
 	  See zram.txt for more information.
 
+config ZRAM_LZ4_COMPRESS
+	bool "Enable LZ4 algorithm support"
+	depends on ZRAM
+	select LZ4_COMPRESS
+	select LZ4_DECOMPRESS
+	default n
+	help
+	  This option enables LZ4 compression algorithm support. Compression
+	  algorithm can be changed using `comp_algorithm' device attribute.
+
 config ZRAM_DEBUG
 	bool "Compressed RAM block device debug support"
 	depends on ZRAM

drivers/block/zram/Makefile

@@ -1,3 +1,5 @@
-zram-y	:=	zram_drv.o
+zram-y	:=	zcomp_lzo.o zcomp.o zram_drv.o
+
+zram-$(CONFIG_ZRAM_LZ4_COMPRESS) += zcomp_lz4.o
 
 obj-$(CONFIG_ZRAM)	+=	zram.o

drivers/block/zram/zcomp.c

@@ -0,0 +1,353 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+
+#include "zcomp.h"
+#include "zcomp_lzo.h"
+#ifdef CONFIG_ZRAM_LZ4_COMPRESS
+#include "zcomp_lz4.h"
+#endif
+
+/*
+ * single zcomp_strm backend
+ */
+struct zcomp_strm_single {
+	struct mutex strm_lock;
+	struct zcomp_strm *zstrm;
+};
+
+/*
+ * multi zcomp_strm backend
+ */
+struct zcomp_strm_multi {
+	/* protect strm list */
+	spinlock_t strm_lock;
+	/* max possible number of zstrm streams */
+	int max_strm;
+	/* number of available zstrm streams */
+	int avail_strm;
+	/* list of available strms */
+	struct list_head idle_strm;
+	wait_queue_head_t strm_wait;
+};
+
+static struct zcomp_backend *backends[] = {
+	&zcomp_lzo,
+#ifdef CONFIG_ZRAM_LZ4_COMPRESS
+	&zcomp_lz4,
+#endif
+	NULL
+};
+
+static struct zcomp_backend *find_backend(const char *compress)
+{
+	int i = 0;
+	while (backends[i]) {
+		if (sysfs_streq(compress, backends[i]->name))
+			break;
+		i++;
+	}
+	return backends[i];
+}
+
+static void zcomp_strm_free(struct zcomp *comp, struct zcomp_strm *zstrm)
+{
+	if (zstrm->private)
+		comp->backend->destroy(zstrm->private);
+	free_pages((unsigned long)zstrm->buffer, 1);
+	kfree(zstrm);
+}
+
+/*
+ * allocate new zcomp_strm structure with ->private initialized by
+ * backend, return NULL on error
+ */
+static struct zcomp_strm *zcomp_strm_alloc(struct zcomp *comp)
+{
+	struct zcomp_strm *zstrm = kmalloc(sizeof(*zstrm), GFP_KERNEL);
+	if (!zstrm)
+		return NULL;
+
+	zstrm->private = comp->backend->create();
+	/*
+	 * allocate 2 pages. 1 for compressed data, plus 1 extra for the
+	 * case when compressed size is larger than the original one
+	 */
+	zstrm->buffer = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
+	if (!zstrm->private || !zstrm->buffer) {
+		zcomp_strm_free(comp, zstrm);
+		zstrm = NULL;
+	}
+	return zstrm;
+}
+
+/*
+ * get idle zcomp_strm or wait until other process release
+ * (zcomp_strm_release()) one for us
+ */
+static struct zcomp_strm *zcomp_strm_multi_find(struct zcomp *comp)
+{
+	struct zcomp_strm_multi *zs = comp->stream;
+	struct zcomp_strm *zstrm;
+
+	while (1) {
+		spin_lock(&zs->strm_lock);
+		if (!list_empty(&zs->idle_strm)) {
+			zstrm = list_entry(zs->idle_strm.next,
+					struct zcomp_strm, list);
+			list_del(&zstrm->list);
+			spin_unlock(&zs->strm_lock);
+			return zstrm;
+		}
+		/* zstrm streams limit reached, wait for idle stream */
+		if (zs->avail_strm >= zs->max_strm) {
+			spin_unlock(&zs->strm_lock);
+			wait_event(zs->strm_wait, !list_empty(&zs->idle_strm));
+			continue;
+		}
+		/* allocate new zstrm stream */
+		zs->avail_strm++;
+		spin_unlock(&zs->strm_lock);
+
+		zstrm = zcomp_strm_alloc(comp);
+		if (!zstrm) {
+			spin_lock(&zs->strm_lock);
+			zs->avail_strm--;
+			spin_unlock(&zs->strm_lock);
+			wait_event(zs->strm_wait, !list_empty(&zs->idle_strm));
+			continue;
+		}
+		break;
+	}
+	return zstrm;
+}
+
+/* add stream back to idle list and wake up waiter or free the stream */
+static void zcomp_strm_multi_release(struct zcomp *comp, struct zcomp_strm *zstrm)
+{
+	struct zcomp_strm_multi *zs = comp->stream;
+
+	spin_lock(&zs->strm_lock);
+	if (zs->avail_strm <= zs->max_strm) {
+		list_add(&zstrm->list, &zs->idle_strm);
+		spin_unlock(&zs->strm_lock);
+		wake_up(&zs->strm_wait);
+		return;
+	}
+
+	zs->avail_strm--;
+	spin_unlock(&zs->strm_lock);
+	zcomp_strm_free(comp, zstrm);
+}
+
+/* change max_strm limit */
+static bool zcomp_strm_multi_set_max_streams(struct zcomp *comp, int num_strm)
+{
+	struct zcomp_strm_multi *zs = comp->stream;
+	struct zcomp_strm *zstrm;
+
+	spin_lock(&zs->strm_lock);
+	zs->max_strm = num_strm;
+	/*
+	 * if user has lowered the limit and there are idle streams,
+	 * immediately free as much streams (and memory) as we can.
+	 */
+	while (zs->avail_strm > num_strm && !list_empty(&zs->idle_strm)) {
+		zstrm = list_entry(zs->idle_strm.next,
+				struct zcomp_strm, list);
+		list_del(&zstrm->list);
+		zcomp_strm_free(comp, zstrm);
+		zs->avail_strm--;
+	}
+	spin_unlock(&zs->strm_lock);
+	return true;
+}
+
+static void zcomp_strm_multi_destroy(struct zcomp *comp)
+{
+	struct zcomp_strm_multi *zs = comp->stream;
+	struct zcomp_strm *zstrm;
+
+	while (!list_empty(&zs->idle_strm)) {
+		zstrm = list_entry(zs->idle_strm.next,
+				struct zcomp_strm, list);
+		list_del(&zstrm->list);
+		zcomp_strm_free(comp, zstrm);
+	}
+	kfree(zs);
+}
+
+static int zcomp_strm_multi_create(struct zcomp *comp, int max_strm)
+{
+	struct zcomp_strm *zstrm;
+	struct zcomp_strm_multi *zs;
+
+	comp->destroy = zcomp_strm_multi_destroy;
+	comp->strm_find = zcomp_strm_multi_find;
+	comp->strm_release = zcomp_strm_multi_release;
+	comp->set_max_streams = zcomp_strm_multi_set_max_streams;
+	zs = kmalloc(sizeof(struct zcomp_strm_multi), GFP_KERNEL);
+	if (!zs)
+		return -ENOMEM;
+
+	comp->stream = zs;
+	spin_lock_init(&zs->strm_lock);
+	INIT_LIST_HEAD(&zs->idle_strm);
+	init_waitqueue_head(&zs->strm_wait);
+	zs->max_strm = max_strm;
+	zs->avail_strm = 1;
+
+	zstrm = zcomp_strm_alloc(comp);
+	if (!zstrm) {
+		kfree(zs);
+		return -ENOMEM;
+	}
+	list_add(&zstrm->list, &zs->idle_strm);
+	return 0;
+}
+
+static struct zcomp_strm *zcomp_strm_single_find(struct zcomp *comp)
+{
+	struct zcomp_strm_single *zs = comp->stream;
+	mutex_lock(&zs->strm_lock);
+	return zs->zstrm;
+}
+
+static void zcomp_strm_single_release(struct zcomp *comp,
+		struct zcomp_strm *zstrm)
+{
+	struct zcomp_strm_single *zs = comp->stream;
+	mutex_unlock(&zs->strm_lock);
+}
+
+static bool zcomp_strm_single_set_max_streams(struct zcomp *comp, int num_strm)
+{
+	/* zcomp_strm_single support only max_comp_streams == 1 */
+	return false;
+}
+
+static void zcomp_strm_single_destroy(struct zcomp *comp)
+{
+	struct zcomp_strm_single *zs = comp->stream;
+	zcomp_strm_free(comp, zs->zstrm);
+	kfree(zs);
+}
+
+static int zcomp_strm_single_create(struct zcomp *comp)
+{
+	struct zcomp_strm_single *zs;
+
+	comp->destroy = zcomp_strm_single_destroy;
+	comp->strm_find = zcomp_strm_single_find;
+	comp->strm_release = zcomp_strm_single_release;
+	comp->set_max_streams = zcomp_strm_single_set_max_streams;
+	zs = kmalloc(sizeof(struct zcomp_strm_single), GFP_KERNEL);
+	if (!zs)
+		return -ENOMEM;
+
+	comp->stream = zs;
+	mutex_init(&zs->strm_lock);
+	zs->zstrm = zcomp_strm_alloc(comp);
+	if (!zs->zstrm) {
+		kfree(zs);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+/* show available compressors */
+ssize_t zcomp_available_show(const char *comp, char *buf)
+{
+	ssize_t sz = 0;
+	int i = 0;
+
+	while (backends[i]) {
+		if (sysfs_streq(comp, backends[i]->name))
+			sz += scnprintf(buf + sz, PAGE_SIZE - sz - 2,
+					"[%s] ", backends[i]->name);
+		else
+			sz += scnprintf(buf + sz, PAGE_SIZE - sz - 2,
+					"%s ", backends[i]->name);
+		i++;
+	}
+	sz += scnprintf(buf + sz, PAGE_SIZE - sz, "\n");
+	return sz;
+}
+
+bool zcomp_set_max_streams(struct zcomp *comp, int num_strm)
+{
+	return comp->set_max_streams(comp, num_strm);
+}
+
+struct zcomp_strm *zcomp_strm_find(struct zcomp *comp)
+{
+	return comp->strm_find(comp);
+}
+
+void zcomp_strm_release(struct zcomp *comp, struct zcomp_strm *zstrm)
+{
+	comp->strm_release(comp, zstrm);
+}
+
+int zcomp_compress(struct zcomp *comp, struct zcomp_strm *zstrm,
+		const unsigned char *src, size_t *dst_len)
+{
+	return comp->backend->compress(src, zstrm->buffer, dst_len,
+			zstrm->private);
+}
+
+int zcomp_decompress(struct zcomp *comp, const unsigned char *src,
+		size_t src_len, unsigned char *dst)
+{
+	return comp->backend->decompress(src, src_len, dst);
+}
+
+void zcomp_destroy(struct zcomp *comp)
+{
+	comp->destroy(comp);
+	kfree(comp);
+}
+
+/*
+ * search available compressors for requested algorithm.
+ * allocate new zcomp and initialize it. return compressing
+ * backend pointer or ERR_PTR if things went bad. ERR_PTR(-EINVAL)
+ * if requested algorithm is not supported, ERR_PTR(-ENOMEM) in
+ * case of allocation error.
+ */
+struct zcomp *zcomp_create(const char *compress, int max_strm)
+{
+	struct zcomp *comp;
+	struct zcomp_backend *backend;
+
+	backend = find_backend(compress);
+	if (!backend)
+		return ERR_PTR(-EINVAL);
+
+	comp = kzalloc(sizeof(struct zcomp), GFP_KERNEL);
+	if (!comp)
+		return ERR_PTR(-ENOMEM);
+
+	comp->backend = backend;
+	if (max_strm > 1)
+		zcomp_strm_multi_create(comp, max_strm);
+	else
+		zcomp_strm_single_create(comp);
+	if (!comp->stream) {
+		kfree(comp);
+		return ERR_PTR(-ENOMEM);
+	}
+	return comp;
+}

drivers/block/zram/zcomp.h

@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ZCOMP_H_
+#define _ZCOMP_H_
+
+#include <linux/mutex.h>
+
+struct zcomp_strm {
+	/* compression/decompression buffer */
+	void *buffer;
+	/*
+	 * The private data of the compression stream, only compression
+	 * stream backend can touch this (e.g. compression algorithm
+	 * working memory)
+	 */
+	void *private;
+	/* used in multi stream backend, protected by backend strm_lock */
+	struct list_head list;
+};
+
+/* static compression backend */
+struct zcomp_backend {
+	int (*compress)(const unsigned char *src, unsigned char *dst,
+			size_t *dst_len, void *private);
+
+	int (*decompress)(const unsigned char *src, size_t src_len,
+			unsigned char *dst);
+
+	void *(*create)(void);
+	void (*destroy)(void *private);
+
+	const char *name;
+};
+
+/* dynamic per-device compression frontend */
+struct zcomp {
+	void *stream;
+	struct zcomp_backend *backend;
+
+	struct zcomp_strm *(*strm_find)(struct zcomp *comp);
+	void (*strm_release)(struct zcomp *comp, struct zcomp_strm *zstrm);
+	bool (*set_max_streams)(struct zcomp *comp, int num_strm);
+	void (*destroy)(struct zcomp *comp);
+};
+
+ssize_t zcomp_available_show(const char *comp, char *buf);
+
+struct zcomp *zcomp_create(const char *comp, int max_strm);
+void zcomp_destroy(struct zcomp *comp);
+
+struct zcomp_strm *zcomp_strm_find(struct zcomp *comp);
+void zcomp_strm_release(struct zcomp *comp, struct zcomp_strm *zstrm);
+
+int zcomp_compress(struct zcomp *comp, struct zcomp_strm *zstrm,
+		const unsigned char *src, size_t *dst_len);
+
+int zcomp_decompress(struct zcomp *comp, const unsigned char *src,
+		size_t src_len, unsigned char *dst);
+
+bool zcomp_set_max_streams(struct zcomp *comp, int num_strm);
+#endif /* _ZCOMP_H_ */

drivers/block/zram/zcomp_lz4.c

@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/lz4.h>
+
+#include "zcomp_lz4.h"
+
+static void *zcomp_lz4_create(void)
+{
+	return kzalloc(LZ4_MEM_COMPRESS, GFP_KERNEL);
+}
+
+static void zcomp_lz4_destroy(void *private)
+{
+	kfree(private);
+}
+
+static int zcomp_lz4_compress(const unsigned char *src, unsigned char *dst,
+		size_t *dst_len, void *private)
+{
+	/* return  : Success if return 0 */
+	return lz4_compress(src, PAGE_SIZE, dst, dst_len, private);
+}
+
+static int zcomp_lz4_decompress(const unsigned char *src, size_t src_len,
+		unsigned char *dst)
+{
+	size_t dst_len = PAGE_SIZE;
+	/* return  : Success if return 0 */
+	return lz4_decompress_unknownoutputsize(src, src_len, dst, &dst_len);
+}
+
+struct zcomp_backend zcomp_lz4 = {
+	.compress = zcomp_lz4_compress,
+	.decompress = zcomp_lz4_decompress,
+	.create = zcomp_lz4_create,
+	.destroy = zcomp_lz4_destroy,
+	.name = "lz4",
+};

drivers/block/zram/zcomp_lz4.h

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ZCOMP_LZ4_H_
+#define _ZCOMP_LZ4_H_
+
+#include "zcomp.h"
+
+extern struct zcomp_backend zcomp_lz4;
+
+#endif /* _ZCOMP_LZ4_H_ */

drivers/block/zram/zcomp_lzo.c

@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/lzo.h>
+
+#include "zcomp_lzo.h"
+
+static void *lzo_create(void)
+{
+	return kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
+}
+
+static void lzo_destroy(void *private)
+{
+	kfree(private);
+}
+
+static int lzo_compress(const unsigned char *src, unsigned char *dst,
+		size_t *dst_len, void *private)
+{
+	int ret = lzo1x_1_compress(src, PAGE_SIZE, dst, dst_len, private);
+	return ret == LZO_E_OK ? 0 : ret;
+}
+
+static int lzo_decompress(const unsigned char *src, size_t src_len,
+		unsigned char *dst)
+{
+	size_t dst_len = PAGE_SIZE;
+	int ret = lzo1x_decompress_safe(src, src_len, dst, &dst_len);
+	return ret == LZO_E_OK ? 0 : ret;
+}
+
+struct zcomp_backend zcomp_lzo = {
+	.compress = lzo_compress,
+	.decompress = lzo_decompress,
+	.create = lzo_create,
+	.destroy = lzo_destroy,
+	.name = "lzo",
+};

drivers/block/zram/zcomp_lzo.h

@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2014 Sergey Senozhatsky.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ZCOMP_LZO_H_
+#define _ZCOMP_LZO_H_
+
+#include "zcomp.h"
+
+extern struct zcomp_backend zcomp_lzo;
+
+#endif /* _ZCOMP_LZO_H_ */

drivers/block/zram/zram_drv.c

@@ -29,19 +29,36 @@
 #include <linux/genhd.h>
 #include <linux/highmem.h>
 #include <linux/slab.h>
-#include <linux/lzo.h>
 #include <linux/string.h>
 #include <linux/vmalloc.h>
+#include <linux/err.h>
 
 #include "zram_drv.h"
 
 /* Globals */
 static int zram_major;
 static struct zram *zram_devices;
+static const char *default_compressor = "lzo";
 
 /* Module params (documentation at end) */
 static unsigned int num_devices = 1;
 
+#define ZRAM_ATTR_RO(name)						\
+static ssize_t zram_attr_##name##_show(struct device *d,		\
+				struct device_attribute *attr, char *b)	\
+{									\
+	struct zram *zram = dev_to_zram(d);				\
+	return scnprintf(b, PAGE_SIZE, "%llu\n",			\
+		(u64)atomic64_read(&zram->stats.name));			\
+}									\
+static struct device_attribute dev_attr_##name =			\
+	__ATTR(name, S_IRUGO, zram_attr_##name##_show, NULL);
+
+static inline int init_done(struct zram *zram)
+{
+	return zram->meta != NULL;
+}
+
 static inline struct zram *dev_to_zram(struct device *dev)
 {
 	return (struct zram *)dev_to_disk(dev)->private_data;
@@ -52,92 +69,114 @@ static ssize_t disksize_show(struct device *dev,
 {
 	struct zram *zram = dev_to_zram(dev);
 
-	return sprintf(buf, "%llu\n", zram->disksize);
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", zram->disksize);
 }
 
 static ssize_t initstate_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	u32 val;
 	struct zram *zram = dev_to_zram(dev);
 
-	return sprintf(buf, "%u\n", zram->init_done);
-}
-
-static ssize_t num_reads_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
+	down_read(&zram->init_lock);
+	val = init_done(zram);
+	up_read(&zram->init_lock);
 
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.num_reads));
+	return scnprintf(buf, PAGE_SIZE, "%u\n", val);
 }
 
-static ssize_t num_writes_show(struct device *dev,
+static ssize_t orig_data_size_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct zram *zram = dev_to_zram(dev);
 
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.num_writes));
+	return scnprintf(buf, PAGE_SIZE, "%llu\n",
+		(u64)(atomic64_read(&zram->stats.pages_stored)) << PAGE_SHIFT);
 }
 
-static ssize_t invalid_io_show(struct device *dev,
+static ssize_t mem_used_total_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	u64 val = 0;
 	struct zram *zram = dev_to_zram(dev);
+	struct zram_meta *meta = zram->meta;
 
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.invalid_io));
-}
-
-static ssize_t notify_free_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
+	down_read(&zram->init_lock);
+	if (init_done(zram))
+		val = zs_get_total_size_bytes(meta->mem_pool);
+	up_read(&zram->init_lock);
 
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.notify_free));
+	return scnprintf(buf, PAGE_SIZE, "%llu\n", val);
 }
 
-static ssize_t zero_pages_show(struct device *dev,
+static ssize_t max_comp_streams_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
+	int val;
 	struct zram *zram = dev_to_zram(dev);
 
-	return sprintf(buf, "%u\n", atomic_read(&zram->stats.pages_zero));
+	down_read(&zram->init_lock);
+	val = zram->max_comp_streams;
+	up_read(&zram->init_lock);
+
+	return scnprintf(buf, PAGE_SIZE, "%d\n", val);
 }
 
-static ssize_t orig_data_size_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
+static ssize_t max_comp_streams_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
 {
+	int num;
 	struct zram *zram = dev_to_zram(dev);
+	int ret;
 
-	return sprintf(buf, "%llu\n",
-		(u64)(atomic_read(&zram->stats.pages_stored)) << PAGE_SHIFT);
-}
+	ret = kstrtoint(buf, 0, &num);
+	if (ret < 0)
+		return ret;
+	if (num < 1)
+		return -EINVAL;
 
-static ssize_t compr_data_size_show(struct device *dev,
-		struct device_attribute *attr, char *buf)
-{
-	struct zram *zram = dev_to_zram(dev);
+	down_write(&zram->init_lock);
+	if (init_done(zram)) {
+		if (!zcomp_set_max_streams(zram->comp, num)) {
+			pr_info("Cannot change max compression streams\n");
+			ret = -EINVAL;
+			goto out;
+		}
+	}
 
-	return sprintf(buf, "%llu\n",
-			(u64)atomic64_read(&zram->stats.compr_size));
+	zram->max_comp_streams = num;
+	ret = len;
+out:
+	up_write(&zram->init_lock);
+	return ret;
 }
 
-static ssize_t mem_used_total_show(struct device *dev,
+static ssize_t comp_algorithm_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
-	u64 val = 0;
+	size_t sz;
 	struct zram *zram = dev_to_zram(dev);
-	struct zram_meta *meta = zram->meta;
 
 	down_read(&zram->init_lock);
-	if (zram->init_done)
-		val = zs_get_total_size_bytes(meta->mem_pool);
+	sz = zcomp_available_show(zram->compressor, buf);
 	up_read(&zram->init_lock);
 
-	return sprintf(buf, "%llu\n", val);
+	return sz;
+}
+
+static ssize_t comp_algorithm_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct zram *zram = dev_to_zram(dev);
+	down_write(&zram->init_lock);
+	if (init_done(zram)) {
+		up_write(&zram->init_lock);
+		pr_info("Can't change algorithm for initialized device\n");
+		return -EBUSY;
+	}
+	strlcpy(zram->compressor, buf, sizeof(zram->compressor));
+	up_write(&zram->init_lock);
+	return len;
 }
 
 /* flag operations needs meta->tb_lock */
@@ -192,8 +231,6 @@ static inline int valid_io_request(struct zram *zram, struct bio *bio)
 static void zram_meta_free(struct zram_meta *meta)
 {
 	zs_destroy_pool(meta->mem_pool);
-	kfree(meta->compress_workmem);
-	free_pages((unsigned long)meta->compress_buffer, 1);
 	vfree(meta->table);
 	kfree(meta);
 }
@@ -205,22 +242,11 @@ static struct zram_meta *zram_meta_alloc(u64 disksize)
 	if (!meta)
 		goto out;
 
-	meta->compress_workmem = kzalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
-	if (!meta->compress_workmem)
-		goto free_meta;
-
-	meta->compress_buffer =
-		(void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
-	if (!meta->compress_buffer) {
-		pr_err("Error allocating compressor buffer space\n");
-		goto free_workmem;
-	}
-
 	num_pages = disksize >> PAGE_SHIFT;
 	meta->table = vzalloc(num_pages * sizeof(*meta->table));
 	if (!meta->table) {
 		pr_err("Error allocating zram address table\n");
-		goto free_buffer;
+		goto free_meta;
 	}
 
 	meta->mem_pool = zs_create_pool(GFP_NOIO | __GFP_HIGHMEM);
@@ -230,15 +256,10 @@ static struct zram_meta *zram_meta_alloc(u64 disksize)
 	}
 
 	rwlock_init(&meta->tb_lock);
-	mutex_init(&meta->buffer_lock);
 	return meta;
 
 free_table:
 	vfree(meta->table);
-free_buffer:
-	free_pages((unsigned long)meta->compress_buffer, 1);
-free_workmem:
-	kfree(meta->compress_workmem);
 free_meta:
 	kfree(meta);
 	meta = NULL;
@@ -288,7 +309,6 @@ static void zram_free_page(struct zram *zram, size_t index)
 {
 	struct zram_meta *meta = zram->meta;
 	unsigned long handle = meta->table[index].handle;
-	u16 size = meta->table[index].size;
 
 	if (unlikely(!handle)) {
 		/*
@@ -297,21 +317,15 @@ static void zram_free_page(struct zram *zram, size_t index)
 		 */
 		if (zram_test_flag(meta, index, ZRAM_ZERO)) {
 			zram_clear_flag(meta, index, ZRAM_ZERO);
-			atomic_dec(&zram->stats.pages_zero);
+			atomic64_dec(&zram->stats.zero_pages);
 		}
 		return;
 	}
 
-	if (unlikely(size > max_zpage_size))
-		atomic_dec(&zram->stats.bad_compress);
-
 	zs_free(meta->mem_pool, handle);
 
-	if (size <= PAGE_SIZE / 2)
-		atomic_dec(&zram->stats.good_compress);
-
-	atomic64_sub(meta->table[index].size, &zram->stats.compr_size);
-	atomic_dec(&zram->stats.pages_stored);
+	atomic64_sub(meta->table[index].size, &zram->stats.compr_data_size);
+	atomic64_dec(&zram->stats.pages_stored);
 
 	meta->table[index].handle = 0;
 	meta->table[index].size = 0;
@@ -319,8 +333,7 @@ static void zram_free_page(struct zram *zram, size_t index)
 
 static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
 {
-	int ret = LZO_E_OK;
-	size_t clen = PAGE_SIZE;
+	int ret = 0;
 	unsigned char *cmem;
 	struct zram_meta *meta = zram->meta;
 	unsigned long handle;
@@ -340,12 +353,12 @@ static int zram_decompress_page(struct zram *zram, char *mem, u32 index)
 	if (size == PAGE_SIZE)
 		copy_page(mem, cmem);
 	else
-		ret = lzo1x_decompress_safe(cmem, size,	mem, &clen);
+		ret = zcomp_decompress(zram->comp, cmem, size, mem);
 	zs_unmap_object(meta->mem_pool, handle);
 	read_unlock(&meta->tb_lock);
 
 	/* Should NEVER happen. Return bio error if it does. */
-	if (unlikely(ret != LZO_E_OK)) {
+	if (unlikely(ret)) {
 		pr_err("Decompression failed! err=%d, page=%u\n", ret, index);
 		atomic64_inc(&zram->stats.failed_reads);
 		return ret;
@@ -388,7 +401,7 @@ static int zram_bvec_read(struct zram *zram, struct bio_vec *bvec,
 
 	ret = zram_decompress_page(zram, uncmem, index);
 	/* Should NEVER happen. Return bio error if it does. */
-	if (unlikely(ret != LZO_E_OK))
+	if (unlikely(ret))
 		goto out_cleanup;
 
 	if (is_partial_io(bvec))
@@ -413,11 +426,10 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 	struct page *page;
 	unsigned char *user_mem, *cmem, *src, *uncmem = NULL;
 	struct zram_meta *meta = zram->meta;
+	struct zcomp_strm *zstrm;
 	bool locked = false;
 
 	page = bvec->bv_page;
-	src = meta->compress_buffer;
-
 	if (is_partial_io(bvec)) {
 		/*
 		 * This is a partial IO. We need to read the full page
@@ -433,7 +445,7 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 			goto out;
 	}
 
-	mutex_lock(&meta->buffer_lock);
+	zstrm = zcomp_strm_find(zram->comp);
 	locked = true;
 	user_mem = kmap_atomic(page);
 
@@ -454,28 +466,25 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 		zram_set_flag(meta, index, ZRAM_ZERO);
 		write_unlock(&zram->meta->tb_lock);
 
-		atomic_inc(&zram->stats.pages_zero);
+		atomic64_inc(&zram->stats.zero_pages);
 		ret = 0;
 		goto out;
 	}
 
-	ret = lzo1x_1_compress(uncmem, PAGE_SIZE, src, &clen,
-			       meta->compress_workmem);
+	ret = zcomp_compress(zram->comp, zstrm, uncmem, &clen);
 	if (!is_partial_io(bvec)) {
 		kunmap_atomic(user_mem);
 		user_mem = NULL;
 		uncmem = NULL;
 	}
 
-	if (unlikely(ret != LZO_E_OK)) {
+	if (unlikely(ret)) {
 		pr_err("Compression failed! err=%d\n", ret);
 		goto out;
 	}
-
+	src = zstrm->buffer;
 	if (unlikely(clen > max_zpage_size)) {
-		atomic_inc(&zram->stats.bad_compress);
 		clen = PAGE_SIZE;
-		src = NULL;
 		if (is_partial_io(bvec))
 			src = uncmem;
 	}
@@ -497,6 +506,8 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 		memcpy(cmem, src, clen);
 	}
 
+	zcomp_strm_release(zram->comp, zstrm);
+	locked = false;
 	zs_unmap_object(meta->mem_pool, handle);
 
 	/*
@@ -511,49 +522,88 @@ static int zram_bvec_write(struct zram *zram, struct bio_vec *bvec, u32 index,
 	write_unlock(&zram->meta->tb_lock);
 
 	/* Update stats */
-	atomic64_add(clen, &zram->stats.compr_size);
-	atomic_inc(&zram->stats.pages_stored);
-	if (clen <= PAGE_SIZE / 2)
-		atomic_inc(&zram->stats.good_compress);
-
+	atomic64_add(clen, &zram->stats.compr_data_size);
+	atomic64_inc(&zram->stats.pages_stored);
 out:
 	if (locked)
-		mutex_unlock(&meta->buffer_lock);
+		zcomp_strm_release(zram->comp, zstrm);
 	if (is_partial_io(bvec))
 		kfree(uncmem);
-
 	if (ret)
 		atomic64_inc(&zram->stats.failed_writes);
 	return ret;
 }
 
 static int zram_bvec_rw(struct zram *zram, struct bio_vec *bvec, u32 index,
-			int offset, struct bio *bio, int rw)
+			int offset, struct bio *bio)
 {
 	int ret;
+	int rw = bio_data_dir(bio);
 
-	if (rw == READ)
+	if (rw == READ) {
+		atomic64_inc(&zram->stats.num_reads);
 		ret = zram_bvec_read(zram, bvec, index, offset, bio);
-	else
+	} else {
+		atomic64_inc(&zram->stats.num_writes);
 		ret = zram_bvec_write(zram, bvec, index, offset);
+	}
 
 	return ret;
 }
 
+/*
+ * zram_bio_discard - handler on discard request
+ * @index: physical block index in PAGE_SIZE units
+ * @offset: byte offset within physical block
+ */
+static void zram_bio_discard(struct zram *zram, u32 index,
+			     int offset, struct bio *bio)
+{
+	size_t n = bio->bi_iter.bi_size;
+
+	/*
+	 * zram manages data in physical block size units. Because logical block
+	 * size isn't identical with physical block size on some arch, we
+	 * could get a discard request pointing to a specific offset within a
+	 * certain physical block.  Although we can handle this request by
+	 * reading that physiclal block and decompressing and partially zeroing
+	 * and re-compressing and then re-storing it, this isn't reasonable
+	 * because our intent with a discard request is to save memory.  So
+	 * skipping this logical block is appropriate here.
+	 */
+	if (offset) {
+		if (n < offset)
+			return;
+
+		n -= offset;
+		index++;
+	}
+
+	while (n >= PAGE_SIZE) {
+		/*
+		 * Discard request can be large so the lock hold times could be
+		 * lengthy.  So take the lock once per page.
+		 */
+		write_lock(&zram->meta->tb_lock);
+		zram_free_page(zram, index);
+		write_unlock(&zram->meta->tb_lock);
+		index++;
+		n -= PAGE_SIZE;
+	}
+}
+
 static void zram_reset_device(struct zram *zram, bool reset_capacity)
 {
 	size_t index;
 	struct zram_meta *meta;
 
 	down_write(&zram->init_lock);
-	if (!zram->init_done) {
+	if (!init_done(zram)) {
 		up_write(&zram->init_lock);
 		return;
 	}
 
 	meta = zram->meta;
-	zram->init_done = 0;
-
 	/* Free all pages that are still in this zram device */
 	for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
 		unsigned long handle = meta->table[index].handle;
@@ -563,6 +613,9 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
 		zs_free(meta->mem_pool, handle);
 	}
 
+	zcomp_destroy(zram->comp);
+	zram->max_comp_streams = 1;
+
 	zram_meta_free(zram->meta);
 	zram->meta = NULL;
 	/* Reset stats */
@@ -574,37 +627,14 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
 	up_write(&zram->init_lock);
 }
 
-static void zram_init_device(struct zram *zram, struct zram_meta *meta)
-{
-	if (zram->disksize > 2 * (totalram_pages << PAGE_SHIFT)) {
-		pr_info(
-		"There is little point creating a zram of greater than "
-		"twice the size of memory since we expect a 2:1 compression "
-		"ratio. Note that zram uses about 0.1%% of the size of "
-		"the disk when not in use so a huge zram is "
-		"wasteful.\n"
-		"\tMemory Size: %lu kB\n"
-		"\tSize you selected: %llu kB\n"
-		"Continuing anyway ...\n",
-		(totalram_pages << PAGE_SHIFT) >> 10, zram->disksize >> 10
-		);
-	}
-
-	/* zram devices sort of resembles non-rotational disks */
-	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zram->disk->queue);
-
-	zram->meta = meta;
-	zram->init_done = 1;
-
-	pr_debug("Initialization done!\n");
-}
-
 static ssize_t disksize_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t len)
 {
 	u64 disksize;
+	struct zcomp *comp;
 	struct zram_meta *meta;
 	struct zram *zram = dev_to_zram(dev);
+	int err;
 
 	disksize = memparse(buf, NULL);
 	if (!disksize)
@@ -614,20 +644,35 @@ static ssize_t disksize_store(struct device *dev,
 	meta = zram_meta_alloc(disksize);
 	if (!meta)
 		return -ENOMEM;
+
+	comp = zcomp_create(zram->compressor, zram->max_comp_streams);
+	if (IS_ERR(comp)) {
+		pr_info("Cannot initialise %s compressing backend\n",
+				zram->compressor);
+		err = PTR_ERR(comp);
+		goto out_free_meta;
+	}
+
 	down_write(&zram->init_lock);
-	if (zram->init_done) {
-		up_write(&zram->init_lock);
-		zram_meta_free(meta);
+	if (init_done(zram)) {
 		pr_info("Cannot change disksize for initialized device\n");
-		return -EBUSY;
+		err = -EBUSY;
+		goto out_destroy_comp;
 	}
 
+	zram->meta = meta;
+	zram->comp = comp;
 	zram->disksize = disksize;
 	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
-	zram_init_device(zram, meta);
 	up_write(&zram->init_lock);
-
 	return len;
+
+out_destroy_comp:
+	up_write(&zram->init_lock);
+	zcomp_destroy(comp);
+out_free_meta:
+	zram_meta_free(meta);
+	return err;
 }
 
 static ssize_t reset_store(struct device *dev,
@@ -671,26 +716,23 @@ out:
 	return ret;
 }
 
-static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
+static void __zram_make_request(struct zram *zram, struct bio *bio)
 {
 	int offset;
 	u32 index;
 	struct bio_vec bvec;
 	struct bvec_iter iter;
 
-	switch (rw) {
-	case READ:
-		atomic64_inc(&zram->stats.num_reads);
-		break;
-	case WRITE:
-		atomic64_inc(&zram->stats.num_writes);
-		break;
-	}
-
 	index = bio->bi_iter.bi_sector >> SECTORS_PER_PAGE_SHIFT;
 	offset = (bio->bi_iter.bi_sector &
 		  (SECTORS_PER_PAGE - 1)) << SECTOR_SHIFT;
 
+	if (unlikely(bio->bi_rw & REQ_DISCARD)) {
+		zram_bio_discard(zram, index, offset, bio);
+		bio_endio(bio, 0);
+		return;
+	}
+
 	bio_for_each_segment(bvec, bio, iter) {
 		int max_transfer_size = PAGE_SIZE - offset;
 
@@ -705,16 +747,15 @@ static void __zram_make_request(struct zram *zram, struct bio *bio, int rw)
 			bv.bv_len = max_transfer_size;
 			bv.bv_offset = bvec.bv_offset;
 
-			if (zram_bvec_rw(zram, &bv, index, offset, bio, rw) < 0)
+			if (zram_bvec_rw(zram, &bv, index, offset, bio) < 0)
 				goto out;
 
 			bv.bv_len = bvec.bv_len - max_transfer_size;
 			bv.bv_offset += max_transfer_size;
-			if (zram_bvec_rw(zram, &bv, index+1, 0, bio, rw) < 0)
+			if (zram_bvec_rw(zram, &bv, index + 1, 0, bio) < 0)
 				goto out;
 		} else
-			if (zram_bvec_rw(zram, &bvec, index, offset, bio, rw)
-			    < 0)
+			if (zram_bvec_rw(zram, &bvec, index, offset, bio) < 0)
 				goto out;
 
 		update_position(&index, &offset, &bvec);
@@ -736,7 +777,7 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 	struct zram *zram = queue->queuedata;
 
 	down_read(&zram->init_lock);
-	if (unlikely(!zram->init_done))
+	if (unlikely(!init_done(zram)))
 		goto error;
 
 	if (!valid_io_request(zram, bio)) {
@@ -744,7 +785,7 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 		goto error;
 	}
 
-	__zram_make_request(zram, bio, bio_data_dir(bio));
+	__zram_make_request(zram, bio);
 	up_read(&zram->init_lock);
 
 	return;
@@ -778,14 +819,21 @@ static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
 		disksize_show, disksize_store);
 static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
 static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
-static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
-static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
-static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
-static DEVICE_ATTR(notify_free, S_IRUGO, notify_free_show, NULL);
-static DEVICE_ATTR(zero_pages, S_IRUGO, zero_pages_show, NULL);
 static DEVICE_ATTR(orig_data_size, S_IRUGO, orig_data_size_show, NULL);
-static DEVICE_ATTR(compr_data_size, S_IRUGO, compr_data_size_show, NULL);
 static DEVICE_ATTR(mem_used_total, S_IRUGO, mem_used_total_show, NULL);
+static DEVICE_ATTR(max_comp_streams, S_IRUGO | S_IWUSR,
+		max_comp_streams_show, max_comp_streams_store);
+static DEVICE_ATTR(comp_algorithm, S_IRUGO | S_IWUSR,
+		comp_algorithm_show, comp_algorithm_store);
+
+ZRAM_ATTR_RO(num_reads);
+ZRAM_ATTR_RO(num_writes);
+ZRAM_ATTR_RO(failed_reads);
+ZRAM_ATTR_RO(failed_writes);
+ZRAM_ATTR_RO(invalid_io);
+ZRAM_ATTR_RO(notify_free);
+ZRAM_ATTR_RO(zero_pages);
+ZRAM_ATTR_RO(compr_data_size);
 
 static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_disksize.attr,
@@ -793,12 +841,16 @@ static struct attribute *zram_disk_attrs[] = {
 	&dev_attr_reset.attr,
 	&dev_attr_num_reads.attr,
 	&dev_attr_num_writes.attr,
+	&dev_attr_failed_reads.attr,
+	&dev_attr_failed_writes.attr,
 	&dev_attr_invalid_io.attr,
 	&dev_attr_notify_free.attr,
 	&dev_attr_zero_pages.attr,
 	&dev_attr_orig_data_size.attr,
 	&dev_attr_compr_data_size.attr,
 	&dev_attr_mem_used_total.attr,
+	&dev_attr_max_comp_streams.attr,
+	&dev_attr_comp_algorithm.attr,
 	NULL,
 };
 
@@ -839,7 +891,8 @@ static int create_device(struct zram *zram, int device_id)
 
 	/* Actual capacity set using syfs (/sys/block/zram<id>/disksize */
 	set_capacity(zram->disk, 0);
-
+	/* zram devices sort of resembles non-rotational disks */
+	queue_flag_set_unlocked(QUEUE_FLAG_NONROT, zram->disk->queue);
 	/*
 	 * To ensure that we always get PAGE_SIZE aligned
 	 * and n*PAGE_SIZED sized I/O requests.
@@ -849,6 +902,21 @@ static int create_device(struct zram *zram, int device_id)
 					ZRAM_LOGICAL_BLOCK_SIZE);
 	blk_queue_io_min(zram->disk->queue, PAGE_SIZE);
 	blk_queue_io_opt(zram->disk->queue, PAGE_SIZE);
+	zram->disk->queue->limits.discard_granularity = PAGE_SIZE;
+	zram->disk->queue->limits.max_discard_sectors = UINT_MAX;
+	/*
+	 * zram_bio_discard() will clear all logical blocks if logical block
+	 * size is identical with physical block size(PAGE_SIZE). But if it is
+	 * different, we will skip discarding some parts of logical blocks in
+	 * the part of the request range which isn't aligned to physical block
+	 * size.  So we can't ensure that all discarded logical blocks are
+	 * zeroed.
+	 */
+	if (ZRAM_LOGICAL_BLOCK_SIZE == PAGE_SIZE)
+		zram->disk->queue->limits.discard_zeroes_data = 1;
+	else
+		zram->disk->queue->limits.discard_zeroes_data = 0;
+	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, zram->disk->queue);
 
 	add_disk(zram->disk);
 
@@ -858,8 +926,9 @@ static int create_device(struct zram *zram, int device_id)
 		pr_warn("Error creating sysfs group");
 		goto out_free_disk;
 	}
-
-	zram->init_done = 0;
+	strlcpy(zram->compressor, default_compressor, sizeof(zram->compressor));
+	zram->meta = NULL;
+	zram->max_comp_streams = 1;
 	return 0;
 
 out_free_disk:

drivers/block/zram/zram_drv.h

@@ -16,9 +16,10 @@
 #define _ZRAM_DRV_H_
 
 #include <linux/spinlock.h>
-#include <linux/mutex.h>
 #include <linux/zsmalloc.h>
 
+#include "zcomp.h"
+
 /*
  * Some arbitrary value. This is just to catch
  * invalid value for num_devices module parameter.
@@ -64,38 +65,33 @@ enum zram_pageflags {
 struct table {
 	unsigned long handle;
 	u16 size;	/* object size (excluding header) */
-	u8 count;	/* object ref count (not yet used) */
 	u8 flags;
 } __aligned(4);
 
 struct zram_stats {
-	atomic64_t compr_size;	/* compressed size of pages stored */
+	atomic64_t compr_data_size;	/* compressed size of pages stored */
 	atomic64_t num_reads;	/* failed + successful */
 	atomic64_t num_writes;	/* --do-- */
 	atomic64_t failed_reads;	/* should NEVER! happen */
 	atomic64_t failed_writes;	/* can happen when memory is too low */
 	atomic64_t invalid_io;	/* non-page-aligned I/O requests */
 	atomic64_t notify_free;	/* no. of swap slot free notifications */
-	atomic_t pages_zero;		/* no. of zero filled pages */
-	atomic_t pages_stored;	/* no. of pages currently stored */
-	atomic_t good_compress;	/* % of pages with compression ratio<=50% */
-	atomic_t bad_compress;	/* % of pages with compression ratio>=75% */
+	atomic64_t zero_pages;		/* no. of zero filled pages */
+	atomic64_t pages_stored;	/* no. of pages currently stored */
 };
 
 struct zram_meta {
 	rwlock_t tb_lock;	/* protect table */
-	void *compress_workmem;
-	void *compress_buffer;
 	struct table *table;
 	struct zs_pool *mem_pool;
-	struct mutex buffer_lock; /* protect compress buffers */
 };
 
 struct zram {
 	struct zram_meta *meta;
 	struct request_queue *queue;
 	struct gendisk *disk;
-	int init_done;
+	struct zcomp *comp;
+
 	/* Prevent concurrent execution of device init, reset and R/W request */
 	struct rw_semaphore init_lock;
 	/*
@@ -103,7 +99,8 @@ struct zram {
 	 * we can store in a disk.
 	 */
 	u64 disksize;	/* bytes */
-
+	int max_comp_streams;
 	struct zram_stats stats;
+	char compressor[10];
 };
 #endif

drivers/char/tpm/Kconfig

@@ -74,7 +74,7 @@ config TCG_NSC
 
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
-	depends on PPC64 || HAS_IOPORT
+	depends on PPC64 || HAS_IOPORT_MAP
 	---help---
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 

drivers/i2c/busses/Kconfig

@@ -936,7 +936,7 @@ config I2C_ACORN
 
 config I2C_ELEKTOR
 	tristate "Elektor ISA card"
-	depends on ISA && HAS_IOPORT && BROKEN_ON_SMP
+	depends on ISA && HAS_IOPORT_MAP && BROKEN_ON_SMP
 	select I2C_ALGOPCF
 	help
 	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own

drivers/lguest/page_tables.c

@@ -887,7 +887,7 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
  * _PAGE_ACCESSED then we can put a read-only PTE entry in immediately, and if
  * they set _PAGE_DIRTY then we can put a writable PTE entry in immediately.
  */
-static void do_set_pte(struct lg_cpu *cpu, int idx,
+static void __guest_set_pte(struct lg_cpu *cpu, int idx,
 		       unsigned long vaddr, pte_t gpte)
 {
 	/* Look up the matching shadow page directory entry. */
@@ -960,13 +960,13 @@ void guest_set_pte(struct lg_cpu *cpu,
 		unsigned int i;
 		for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
 			if (cpu->lg->pgdirs[i].pgdir)
-				do_set_pte(cpu, i, vaddr, gpte);
+				__guest_set_pte(cpu, i, vaddr, gpte);
 	} else {
 		/* Is this page table one we have a shadow for? */
 		int pgdir = find_pgdir(cpu->lg, gpgdir);
 		if (pgdir != ARRAY_SIZE(cpu->lg->pgdirs))
 			/* If so, do the update. */
-			do_set_pte(cpu, pgdir, vaddr, gpte);
+			__guest_set_pte(cpu, pgdir, vaddr, gpte);
 	}
 }
 

drivers/misc/sgi-gru/grukdump.c

@@ -178,10 +178,10 @@ static int gru_dump_context(struct gru_state *gru, int ctxnum,
 	hdr.cbrcnt = cbrcnt;
 	hdr.dsrcnt = dsrcnt;
 	hdr.cch_locked = cch_locked;
-	if (!ret && copy_to_user((void __user *)uhdr, &hdr, sizeof(hdr)))
-		ret = -EFAULT;
+	if (copy_to_user(uhdr, &hdr, sizeof(hdr)))
+		return -EFAULT;
 
-	return ret ? ret : bytes;
+	return bytes;
 }
 
 int gru_dump_chiplet_request(unsigned long arg)

drivers/net/can/sja1000/Kconfig

@@ -39,7 +39,7 @@ config CAN_EMS_PCI
 config CAN_PEAK_PCMCIA
 	tristate "PEAK PCAN-PC Card"
 	depends on PCMCIA
-	depends on HAS_IOPORT
+	depends on HAS_IOPORT_MAP
 	---help---
 	  This driver is for the PCAN-PC Card PCMCIA adapter (1 or 2 channels)
 	  from PEAK-System (http://www.peak-system.com). To compile this

drivers/net/ethernet/3com/Kconfig

@@ -66,7 +66,7 @@ config PCMCIA_3C589
 
 config VORTEX
 	tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
-	depends on (PCI || EISA) && HAS_IOPORT
+	depends on (PCI || EISA) && HAS_IOPORT_MAP
 	select MII
 	---help---
 	  This option enables driver support for a large number of 10Mbps and

drivers/net/rionet.c

@@ -493,6 +493,7 @@ static int rionet_setup_netdev(struct rio_mport *mport, struct net_device *ndev)
 	ndev->netdev_ops = &rionet_netdev_ops;
 	ndev->mtu = RIO_MAX_MSG_SIZE - 14;
 	ndev->features = NETIF_F_LLTX;
+	SET_NETDEV_DEV(ndev, &mport->dev);
 	SET_ETHTOOL_OPS(ndev, &rionet_ethtool_ops);
 
 	spin_lock_init(&rnet->lock);

drivers/rapidio/devices/tsi721.c

@@ -2256,6 +2256,7 @@ static int tsi721_setup_mport(struct tsi721_device *priv)
 	mport->phy_type = RIO_PHY_SERIAL;
 	mport->priv = (void *)priv;
 	mport->phys_efptr = 0x100;
+	mport->dev.parent = &pdev->dev;
 	priv->mport = mport;
 
 	INIT_LIST_HEAD(&mport->dbells);

drivers/rapidio/devices/tsi721.h

@@ -644,6 +644,9 @@ enum tsi721_smsg_int_flag {
 
 #ifdef CONFIG_RAPIDIO_DMA_ENGINE
 
+#define TSI721_BDMA_BD_RING_SZ	128
+#define TSI721_BDMA_MAX_BCOUNT	(TSI721_DMAD_BCOUNT1 + 1)
+
 struct tsi721_tx_desc {
 	struct dma_async_tx_descriptor	txd;
 	struct tsi721_dma_desc		*hw_desc;
@@ -652,6 +655,7 @@ struct tsi721_tx_desc {
 	u64				rio_addr;
 	/* upper 2-bits of 66-bit RIO address */
 	u8				rio_addr_u;
+	u32				bcount;
 	bool				interrupt;
 	struct list_head		desc_node;
 	struct list_head		tx_list;

drivers/rapidio/devices/tsi721_dma.c

@@ -304,35 +304,17 @@ struct tsi721_tx_desc *tsi721_desc_get(struct tsi721_bdma_chan *bdma_chan)
 }
 
 static int
-tsi721_fill_desc(struct tsi721_bdma_chan *bdma_chan,
-	struct tsi721_tx_desc *desc, struct scatterlist *sg,
+tsi721_desc_fill_init(struct tsi721_tx_desc *desc, struct scatterlist *sg,
 	enum dma_rtype rtype, u32 sys_size)
 {
 	struct tsi721_dma_desc *bd_ptr = desc->hw_desc;
 	u64 rio_addr;
 
-	if (sg_dma_len(sg) > TSI721_DMAD_BCOUNT1 + 1) {
-		dev_err(bdma_chan->dchan.device->dev,
-			"SG element is too large\n");
-		return -EINVAL;
-	}
-
-	dev_dbg(bdma_chan->dchan.device->dev,
-		"desc: 0x%llx, addr: 0x%llx len: 0x%x\n",
-		(u64)desc->txd.phys, (unsigned long long)sg_dma_address(sg),
-		sg_dma_len(sg));
-
-	dev_dbg(bdma_chan->dchan.device->dev,
-		"bd_ptr = %p did=%d raddr=0x%llx\n",
-		bd_ptr, desc->destid, desc->rio_addr);
-
 	/* Initialize DMA descriptor */
 	bd_ptr->type_id = cpu_to_le32((DTYPE1 << 29) |
 					(rtype << 19) | desc->destid);
-	if (desc->interrupt)
-		bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
 	bd_ptr->bcount = cpu_to_le32(((desc->rio_addr & 0x3) << 30) |
-					(sys_size << 26) | sg_dma_len(sg));
+				     (sys_size << 26));
 	rio_addr = (desc->rio_addr >> 2) |
 				((u64)(desc->rio_addr_u & 0x3) << 62);
 	bd_ptr->raddr_lo = cpu_to_le32(rio_addr & 0xffffffff);
@@ -346,6 +328,20 @@ tsi721_fill_desc(struct tsi721_bdma_chan *bdma_chan,
 	return 0;
 }
 
+static int
+tsi721_desc_fill_end(struct tsi721_tx_desc *desc)
+{
+	struct tsi721_dma_desc *bd_ptr = desc->hw_desc;
+
+	/* Update DMA descriptor */
+	if (desc->interrupt)
+		bd_ptr->type_id |= cpu_to_le32(TSI721_DMAD_IOF);
+	bd_ptr->bcount |= cpu_to_le32(desc->bcount & TSI721_DMAD_BCOUNT1);
+
+	return 0;
+}
+
+
 static void tsi721_dma_chain_complete(struct tsi721_bdma_chan *bdma_chan,
 				      struct tsi721_tx_desc *desc)
 {
@@ -674,6 +670,7 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan,
 	unsigned int i;
 	u32 sys_size = dma_to_mport(dchan->device)->sys_size;
 	enum dma_rtype rtype;
+	dma_addr_t next_addr = -1;
 
 	if (!sgl || !sg_len) {
 		dev_err(dchan->device->dev, "%s: No SG list\n", __func__);
@@ -704,36 +701,84 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan,
 	for_each_sg(sgl, sg, sg_len, i) {
 		int err;
 
-		dev_dbg(dchan->device->dev, "%s: sg #%d\n", __func__, i);
+		if (sg_dma_len(sg) > TSI721_BDMA_MAX_BCOUNT) {
+			dev_err(dchan->device->dev,
+				"%s: SG entry %d is too large\n", __func__, i);
+			goto err_desc_put;
+		}
+
+		/*
+		 * If this sg entry forms contiguous block with previous one,
+		 * try to merge it into existing DMA descriptor
+		 */
+		if (desc) {
+			if (next_addr == sg_dma_address(sg) &&
+			    desc->bcount + sg_dma_len(sg) <=
+						TSI721_BDMA_MAX_BCOUNT) {
+				/* Adjust byte count of the descriptor */
+				desc->bcount += sg_dma_len(sg);
+				goto entry_done;
+			}
+
+			/*
+			 * Finalize this descriptor using total
+			 * byte count value.
+			 */
+			tsi721_desc_fill_end(desc);
+			dev_dbg(dchan->device->dev, "%s: desc final len: %d\n",
+				__func__, desc->bcount);
+		}
+
+		/*
+		 * Obtain and initialize a new descriptor
+		 */
 		desc = tsi721_desc_get(bdma_chan);
 		if (!desc) {
 			dev_err(dchan->device->dev,
-				"Not enough descriptors available\n");
-			goto err_desc_get;
+				"%s: Failed to get new descriptor for SG %d\n",
+				__func__, i);
+			goto err_desc_put;
 		}
 
-		if (sg_is_last(sg))
-			desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0;
-		else
-			desc->interrupt = false;
-
 		desc->destid = rext->destid;
 		desc->rio_addr = rio_addr;
 		desc->rio_addr_u = 0;
+		desc->bcount = sg_dma_len(sg);
+
+		dev_dbg(dchan->device->dev,
+			"sg%d desc: 0x%llx, addr: 0x%llx len: %d\n",
+			i, (u64)desc->txd.phys,
+			(unsigned long long)sg_dma_address(sg),
+			sg_dma_len(sg));
+
+		dev_dbg(dchan->device->dev,
+			"bd_ptr = %p did=%d raddr=0x%llx\n",
+			desc->hw_desc, desc->destid, desc->rio_addr);
 
-		err = tsi721_fill_desc(bdma_chan, desc, sg, rtype, sys_size);
+		err = tsi721_desc_fill_init(desc, sg, rtype, sys_size);
 		if (err) {
 			dev_err(dchan->device->dev,
 				"Failed to build desc: %d\n", err);
-			goto err_desc_get;
+			goto err_desc_put;
 		}
 
-		rio_addr += sg_dma_len(sg);
+		next_addr = sg_dma_address(sg);
 
 		if (!first)
 			first = desc;
 		else
 			list_add_tail(&desc->desc_node, &first->tx_list);
+
+entry_done:
+		if (sg_is_last(sg)) {
+			desc->interrupt = (flags & DMA_PREP_INTERRUPT) != 0;
+			tsi721_desc_fill_end(desc);
+			dev_dbg(dchan->device->dev, "%s: desc final len: %d\n",
+				__func__, desc->bcount);
+		} else {
+			rio_addr += sg_dma_len(sg);
+			next_addr += sg_dma_len(sg);
+		}
 	}
 
 	first->txd.cookie = -EBUSY;
@@ -741,7 +786,7 @@ struct dma_async_tx_descriptor *tsi721_prep_rio_sg(struct dma_chan *dchan,
 
 	return &first->txd;
 
-err_desc_get:
+err_desc_put:
 	tsi721_desc_put(bdma_chan, first);
 	return NULL;
 }
@@ -792,7 +837,7 @@ int tsi721_register_dma(struct tsi721_device *priv)
 		if (i == TSI721_DMACH_MAINT)
 			continue;
 
-		bdma_chan->bd_num = 64;
+		bdma_chan->bd_num = TSI721_BDMA_BD_RING_SZ;
 		bdma_chan->regs = priv->regs + TSI721_DMAC_BASE(i);
 
 		bdma_chan->dchan.device = &mport->dma;

drivers/rapidio/rio-driver.c

@@ -167,7 +167,6 @@ void rio_unregister_driver(struct rio_driver *rdrv)
 void rio_attach_device(struct rio_dev *rdev)
 {
 	rdev->dev.bus = &rio_bus_type;
-	rdev->dev.parent = &rio_bus;
 }
 EXPORT_SYMBOL_GPL(rio_attach_device);
 
@@ -216,9 +215,12 @@ static int rio_uevent(struct device *dev, struct kobj_uevent_env *env)
 	return 0;
 }
 
-struct device rio_bus = {
-	.init_name = "rapidio",
+struct class rio_mport_class = {
+	.name		= "rapidio_port",
+	.owner		= THIS_MODULE,
+	.dev_groups	= rio_mport_groups,
 };
+EXPORT_SYMBOL_GPL(rio_mport_class);
 
 struct bus_type rio_bus_type = {
 	.name = "rapidio",
@@ -233,14 +235,20 @@ struct bus_type rio_bus_type = {
 /**
  *  rio_bus_init - Register the RapidIO bus with the device model
  *
- *  Registers the RIO bus device and RIO bus type with the Linux
+ *  Registers the RIO mport device class and RIO bus type with the Linux
  *  device model.
  */
 static int __init rio_bus_init(void)
 {
-	if (device_register(&rio_bus) < 0)
-		printk("RIO: failed to register RIO bus device\n");
-	return bus_register(&rio_bus_type);
+	int ret;
+
+	ret = class_register(&rio_mport_class);
+	if (!ret) {
+		ret = bus_register(&rio_bus_type);
+		if (ret)
+			class_unregister(&rio_mport_class);
+	}
+	return ret;
 }
 
 postcore_initcall(rio_bus_init);

drivers/rapidio/rio-scan.c

@@ -461,6 +461,7 @@ static struct rio_dev *rio_setup_device(struct rio_net *net,
 			     rdev->comp_tag & RIO_CTAG_UDEVID);
 	}
 
+	rdev->dev.parent = &port->dev;
 	rio_attach_device(rdev);
 
 	device_initialize(&rdev->dev);

drivers/rapidio/rio-sysfs.c

@@ -341,3 +341,43 @@ const struct attribute_group *rio_bus_groups[] = {
 	&rio_bus_group,
 	NULL,
 };
+
+static ssize_t
+port_destid_show(struct device *dev, struct device_attribute *attr,
+		 char *buf)
+{
+	struct rio_mport *mport = to_rio_mport(dev);
+
+	if (mport)
+		return sprintf(buf, "0x%04x\n", mport->host_deviceid);
+	else
+		return -ENODEV;
+}
+static DEVICE_ATTR_RO(port_destid);
+
+static ssize_t sys_size_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct rio_mport *mport = to_rio_mport(dev);
+
+	if (mport)
+		return sprintf(buf, "%u\n", mport->sys_size);
+	else
+		return -ENODEV;
+}
+static DEVICE_ATTR_RO(sys_size);
+
+static struct attribute *rio_mport_attrs[] = {
+	&dev_attr_port_destid.attr,
+	&dev_attr_sys_size.attr,
+	NULL,
+};
+
+static const struct attribute_group rio_mport_group = {
+	.attrs = rio_mport_attrs,
+};
+
+const struct attribute_group *rio_mport_groups[] = {
+	&rio_mport_group,
+	NULL,
+};

drivers/rapidio/rio.c

@@ -1884,6 +1884,7 @@ static int rio_get_hdid(int index)
 int rio_register_mport(struct rio_mport *port)
 {
 	struct rio_scan_node *scan = NULL;
+	int res = 0;
 
 	if (next_portid >= RIO_MAX_MPORTS) {
 		pr_err("RIO: reached specified max number of mports\n");
@@ -1894,6 +1895,16 @@ int rio_register_mport(struct rio_mport *port)
 	port->host_deviceid = rio_get_hdid(port->id);
 	port->nscan = NULL;
 
+	dev_set_name(&port->dev, "rapidio%d", port->id);
+	port->dev.class = &rio_mport_class;
+
+	res = device_register(&port->dev);
+	if (res)
+		dev_err(&port->dev, "RIO: mport%d registration failed ERR=%d\n",
+			port->id, res);
+	else
+		dev_dbg(&port->dev, "RIO: mport%d registered\n", port->id);
+
 	mutex_lock(&rio_mport_list_lock);
 	list_add_tail(&port->node, &rio_mports);
 

drivers/rapidio/rio.h

@@ -50,6 +50,7 @@ extern int rio_mport_scan(int mport_id);
 /* Structures internal to the RIO core code */
 extern const struct attribute_group *rio_dev_groups[];
 extern const struct attribute_group *rio_bus_groups[];
+extern const struct attribute_group *rio_mport_groups[];
 
 #define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
 #define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))

fs/9p/vfs_file.c

@@ -832,6 +832,7 @@ static void v9fs_mmap_vm_close(struct vm_area_struct *vma)
 
 static const struct vm_operations_struct v9fs_file_vm_ops = {
 	.fault = filemap_fault,
+	.map_pages = filemap_map_pages,
 	.page_mkwrite = v9fs_vm_page_mkwrite,
 	.remap_pages = generic_file_remap_pages,
 };
@@ -839,6 +840,7 @@ static const struct vm_operations_struct v9fs_file_vm_ops = {
 static const struct vm_operations_struct v9fs_mmap_file_vm_ops = {
 	.close = v9fs_mmap_vm_close,
 	.fault = filemap_fault,
+	.map_pages = filemap_map_pages,
 	.page_mkwrite = v9fs_vm_page_mkwrite,
 	.remap_pages = generic_file_remap_pages,
 };

fs/adfs/super.c

@@ -266,7 +266,7 @@ static void init_once(void *foo)
 	inode_init_once(&ei->vfs_inode);
 }
 
-static int init_inodecache(void)
+static int __init init_inodecache(void)
 {
 	adfs_inode_cachep = kmem_cache_create("adfs_inode_cache",
 					     sizeof(struct adfs_inode_info),

fs/affs/affs.h

@@ -5,14 +5,6 @@
 #include <linux/mutex.h>
 #include <linux/workqueue.h>
 
-/* AmigaOS allows file names with up to 30 characters length.
- * Names longer than that will be silently truncated. If you
- * want to disallow this, comment out the following #define.
- * Creating filesystem objects with longer names will then
- * result in an error (ENAMETOOLONG).
- */
-/*#define AFFS_NO_TRUNCATE */
-
 /* Ugly macros make the code more pretty. */
 
 #define GET_END_PTR(st,p,sz)		 ((st *)((char *)(p)+((sz)-sizeof(st))))
@@ -28,7 +20,6 @@
 
 #define AFFS_CACHE_SIZE		PAGE_SIZE
 
-#define AFFS_MAX_PREALLOC	32
 #define AFFS_LC_SIZE		(AFFS_CACHE_SIZE/sizeof(u32)/2)
 #define AFFS_AC_SIZE		(AFFS_CACHE_SIZE/sizeof(struct affs_ext_key)/2)
 #define AFFS_AC_MASK		(AFFS_AC_SIZE-1)
@@ -118,6 +109,7 @@ struct affs_sb_info {
 #define SF_OFS		0x0200		/* Old filesystem */
 #define SF_PREFIX	0x0400		/* Buffer for prefix is allocated */
 #define SF_VERBOSE	0x0800		/* Talk about fs when mounting */
+#define SF_NO_TRUNCATE	0x1000		/* Don't truncate filenames */
 
 /* short cut to get to the affs specific sb data */
 static inline struct affs_sb_info *AFFS_SB(struct super_block *sb)
@@ -137,9 +129,13 @@ extern void	affs_fix_checksum(struct super_block *sb, struct buffer_head *bh);
 extern void	secs_to_datestamp(time_t secs, struct affs_date *ds);
 extern umode_t	prot_to_mode(u32 prot);
 extern void	mode_to_prot(struct inode *inode);
-extern void	affs_error(struct super_block *sb, const char *function, const char *fmt, ...);
-extern void	affs_warning(struct super_block *sb, const char *function, const char *fmt, ...);
-extern int	affs_check_name(const unsigned char *name, int len);
+extern void	affs_error(struct super_block *sb, const char *function,
+			   const char *fmt, ...);
+extern void	affs_warning(struct super_block *sb, const char *function,
+			     const char *fmt, ...);
+extern bool	affs_nofilenametruncate(const struct dentry *dentry);
+extern int	affs_check_name(const unsigned char *name, int len,
+				bool notruncate);
 extern int	affs_copy_name(unsigned char *bstr, struct dentry *dentry);
 
 /* bitmap. c */