Merge branch 'mlxsw-next'

Jiri Pirko says:

====================
mlxsw: small driver update, including switchdev doc update

Ido Schimmel (3):
  mlxsw: spectrum: Reduce number of supported 802.1D bridges
  switchdev: Use switch ID in suggested udev rule
  mlxsw: spectrum: Add support for physical port names
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/switchdev.txt

@@ -89,6 +89,18 @@ Typically, the management port is not participating in offloaded data plane and
 is loaded with a different driver, such as a NIC driver, on the management port
 device.
 
+Switch ID
+^^^^^^^^^
+
+The switchdev driver must implement the switchdev op switchdev_port_attr_get
+for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same
+physical ID for each port of a switch.  The ID must be unique between switches
+on the same system.  The ID does not need to be unique between switches on
+different systems.
+
+The switch ID is used to locate ports on a switch and to know if aggregated
+ports belong to the same switch.
+
 Port Netdev Naming
 ^^^^^^^^^^^^^^^^^^
 
@@ -104,25 +116,13 @@ external configuration.  For example, if a physical 40G port is split logically
 into 4 10G ports, resulting in 4 port netdevs, the device can give a unique
 name for each port using port PHYS name.  The udev rule would be:
 
-SUBSYSTEM=="net", ACTION=="add", DRIVER="<driver>", ATTR{phys_port_name}!="", \
-	NAME="$attr{phys_port_name}"
+SUBSYSTEM=="net", ACTION=="add", ATTR{phys_switch_id}=="<phys_switch_id>", \
+	ATTR{phys_port_name}!="", NAME="swX$attr{phys_port_name}"
 
 Suggested naming convention is "swXpYsZ", where X is the switch name or ID, Y
 is the port name or ID, and Z is the sub-port name or ID.  For example, sw1p1s0
 would be sub-port 0 on port 1 on switch 1.
 
-Switch ID
-^^^^^^^^^
-
-The switchdev driver must implement the switchdev op switchdev_port_attr_get
-for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same
-physical ID for each port of a switch.  The ID must be unique between switches
-on the same system.  The ID does not need to be unique between switches on
-different systems.
-
-The switch ID is used to locate ports on a switch and to know if aggregated
-ports belong to the same switch.
-
 Port Features
 ^^^^^^^^^^^^^
 

drivers/net/ethernet/mellanox/mlxsw/spectrum.c

@@ -305,9 +305,9 @@ mlxsw_sp_port_system_port_mapping_set(struct mlxsw_sp_port *mlxsw_sp_port)
 	return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(sspr), sspr_pl);
 }
 
-static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
-					 u8 local_port, u8 *p_module,
-					 u8 *p_width)
+static int __mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
+					   u8 local_port, u8 *p_module,
+					   u8 *p_width, u8 *p_lane)
 {
 	char pmlp_pl[MLXSW_REG_PMLP_LEN];
 	int err;
@@ -318,9 +318,20 @@ static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
 		return err;
 	*p_module = mlxsw_reg_pmlp_module_get(pmlp_pl, 0);
 	*p_width = mlxsw_reg_pmlp_width_get(pmlp_pl);
+	*p_lane = mlxsw_reg_pmlp_tx_lane_get(pmlp_pl, 0);
 	return 0;
 }
 
+static int mlxsw_sp_port_module_info_get(struct mlxsw_sp *mlxsw_sp,
+					 u8 local_port, u8 *p_module,
+					 u8 *p_width)
+{
+	u8 lane;
+
+	return __mlxsw_sp_port_module_info_get(mlxsw_sp, local_port, p_module,
+					       p_width, &lane);
+}
+
 static int mlxsw_sp_port_module_map(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 				    u8 module, u8 width, u8 lane)
 {
@@ -861,6 +872,33 @@ int mlxsw_sp_port_kill_vid(struct net_device *dev,
 	return 0;
 }
 
+static int mlxsw_sp_port_get_phys_port_name(struct net_device *dev, char *name,
+					    size_t len)
+{
+	struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev);
+	u8 module, width, lane;
+	int err;
+
+	err = __mlxsw_sp_port_module_info_get(mlxsw_sp_port->mlxsw_sp,
+					      mlxsw_sp_port->local_port,
+					      &module, &width, &lane);
+	if (err) {
+		netdev_err(dev, "Failed to retrieve module information\n");
+		return err;
+	}
+
+	if (!mlxsw_sp_port->split)
+		err = snprintf(name, len, "p%d", module + 1);
+	else
+		err = snprintf(name, len, "p%ds%d", module + 1,
+			       lane / width);
+
+	if (err >= len)
+		return -EINVAL;
+
+	return 0;
+}
+
 static const struct net_device_ops mlxsw_sp_port_netdev_ops = {
 	.ndo_open		= mlxsw_sp_port_open,
 	.ndo_stop		= mlxsw_sp_port_stop,
@@ -877,6 +915,7 @@ static const struct net_device_ops mlxsw_sp_port_netdev_ops = {
 	.ndo_bridge_setlink	= switchdev_port_bridge_setlink,
 	.ndo_bridge_getlink	= switchdev_port_bridge_getlink,
 	.ndo_bridge_dellink	= switchdev_port_bridge_dellink,
+	.ndo_get_phys_port_name	= mlxsw_sp_port_get_phys_port_name,
 };
 
 static void mlxsw_sp_port_get_drvinfo(struct net_device *dev,

drivers/net/ethernet/mellanox/mlxsw/spectrum.h

@@ -50,7 +50,7 @@
 
 #define MLXSW_SP_VFID_BASE VLAN_N_VID
 #define MLXSW_SP_VFID_PORT_MAX 512	/* Non-bridged VLAN interfaces */
-#define MLXSW_SP_VFID_BR_MAX 8192	/* Bridged VLAN interfaces */
+#define MLXSW_SP_VFID_BR_MAX 6144	/* Bridged VLAN interfaces */
 #define MLXSW_SP_VFID_MAX (MLXSW_SP_VFID_PORT_MAX + MLXSW_SP_VFID_BR_MAX)
 
 #define MLXSW_SP_LAG_MAX 64