Merge tag 'omap-for-v4.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Merge "omap soc updates for v4.9 merge window" from Tony Lindgren:

Two patches from Javier Martinez Canillas <javier@osg.samsung.com>
to update mach-omap1 and mach-oamp2 to use IS_ENABLED macro.

* tag 'omap-for-v4.9/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module

arch/arm/mach-omap1/board-h2-mmc.c

@@ -19,7 +19,7 @@
 #include "board-h2.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)

arch/arm/mach-omap1/board-h2.c

@@ -349,7 +349,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif

arch/arm/mach-omap1/board-h3-mmc.c

@@ -20,7 +20,7 @@
 #include "board-h3.h"
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)

arch/arm/mach-omap1/board-h3.c

@@ -368,7 +368,7 @@ static struct omap_usb_config h3_usb_config __initdata = {
 
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode       = 19,   /* 0:host(off) 1:dev|otg 2:disabled */
-#elif  defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode       = 20,   /* 1:dev|otg(off) 1:host 2:disabled */
 #endif

arch/arm/mach-omap1/board-htcherald.c

@@ -401,7 +401,7 @@ static struct platform_device lcd_device = {
 };
 
 /* MMC Card */
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 static struct omap_mmc_platform_data htc_mmc1_data = {
 	.nr_slots                       = 1,
 	.switch_slot                    = NULL,
@@ -586,7 +586,7 @@ static void __init htcherald_init(void)
 
 	omap_register_i2c_bus(1, 100, NULL, 0);
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 	htc_mmc_data[0] = &htc_mmc1_data;
 	omap1_init_mmc(htc_mmc_data, 1);
 #endif

arch/arm/mach-omap1/board-innovator.c

@@ -315,7 +315,7 @@ static struct omap_usb_config h2_usb_config __initdata = {
 #if IS_ENABLED(CONFIG_USB_OMAP)
 	.hmc_mode	= 19,	/* 0:host(off) 1:dev|otg 2:disabled */
 	/* .hmc_mode	= 21,*/	/* 0:host(off) 1:dev(loopback) 2:host(loopback) */
-#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#elif	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	/* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
 	.hmc_mode	= 20,	/* 1:dev|otg(off) 1:host 2:disabled */
 #endif
@@ -328,7 +328,7 @@ static struct omap_lcd_config innovator1610_lcd_config __initdata = {
 };
 #endif
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)

arch/arm/mach-omap1/board-nokia770.c

@@ -159,7 +159,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.extcon		= "tahvo-usb",
 };
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 #define NOKIA770_GPIO_MMC_POWER		41
 #define NOKIA770_GPIO_MMC_SWITCH	23
@@ -216,7 +216,7 @@ static inline void nokia770_mmc_init(void)
 }
 #endif
 
-#if defined(CONFIG_I2C_CBUS_GPIO) || defined(CONFIG_I2C_CBUS_GPIO_MODULE)
+#if IS_ENABLED(CONFIG_I2C_CBUS_GPIO)
 static struct i2c_cbus_platform_data nokia770_cbus_data = {
 	.clk_gpio = OMAP_MPUIO(9),
 	.dat_gpio = OMAP_MPUIO(10),

arch/arm/mach-omap1/board-sx1-mmc.c

@@ -20,7 +20,7 @@
 
 #include "mmc.h"
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static int mmc_set_power(struct device *dev, int slot, int power_on,
 				int vdd)

arch/arm/mach-omap1/devices.c

@@ -33,7 +33,7 @@
 #include "mmc.h"
 #include "sram.h"
 
-#if defined(CONFIG_RTC_DRV_OMAP) || defined(CONFIG_RTC_DRV_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_RTC_DRV_OMAP)
 
 #define	OMAP_RTC_BASE		0xfffb4800
 
@@ -72,7 +72,7 @@ static inline void omap_init_mbox(void) { }
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 
 static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
@@ -230,7 +230,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 /*-------------------------------------------------------------------------*/
 
 /* OMAP7xx SPI support */
-#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_100K)
 
 struct platform_device omap_spi1 = {
 	.name           = "omap1_spi100k",
@@ -312,7 +312,7 @@ static inline void omap_init_sti(void) {}
  * mcbsp1..3	= 5..7
  */
 
-#if defined(CONFIG_SPI_OMAP_UWIRE) || defined(CONFIG_SPI_OMAP_UWIRE_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP_UWIRE)
 
 #define	OMAP_UWIRE_BASE		0xfffb3000
 
@@ -418,7 +418,7 @@ static int __init omap1_init_devices(void)
 }
 arch_initcall(omap1_init_devices);
 
-#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
+#if IS_ENABLED(CONFIG_OMAP_WATCHDOG)
 
 static struct resource wdt_resources[] = {
 	{

arch/arm/mach-omap1/fb.c

@@ -33,7 +33,7 @@
 
 #include <asm/mach/map.h>
 
-#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP)
 
 static bool omapfb_lcd_configured;
 static struct omapfb_platform_data omapfb_config;

arch/arm/mach-omap1/include/mach/usb.h

@@ -12,7 +12,7 @@
 
 void omap_otg_init(struct omap_usb_config *config);
 
-#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+#if IS_ENABLED(CONFIG_USB)
 void omap1_usb_init(struct omap_usb_config *pdata);
 #else
 static inline void omap1_usb_init(struct omap_usb_config *pdata)

arch/arm/mach-omap1/mmc.h

@@ -7,7 +7,7 @@
 #define OMAP1_MMC1_BASE		0xfffb7800
 #define OMAP1_MMC2_BASE		0xfffb7c00	/* omap16xx only */
 
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP)
 void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 				int nr_controllers);
 #else

arch/arm/mach-omap1/usb.c

@@ -136,7 +136,7 @@ omap_otg_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->otg || config->register_host) {
 		struct platform_device *ohci_device = config->ohci_device;
 		int status;
@@ -221,7 +221,7 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
@@ -612,7 +612,7 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
 	if (config->register_host) {
 		int status;
 

arch/arm/mach-omap2/board-flash.c

@@ -81,8 +81,7 @@ __init board_nor_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
 		pr_err("Unable to register NOR device\n");
 }
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 static struct omap_onenand_platform_data board_onenand_data = {
 	.dma_channel	= -1,   /* disable DMA in OMAP OneNAND driver */
 };
@@ -97,10 +96,9 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 
 	gpmc_onenand_init(&board_onenand_data);
 }
-#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) */
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 
 /* Note that all values in this struct are in nanoseconds */
 struct gpmc_timings nand_default_timings[1] = {
@@ -144,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
 	board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_SW;
 	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
-#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
+#endif /* IS_ENABLED(CONFIG_MTD_NAND_OMAP2) */
 
 /**
  * get_gpmc0_type - Reads the FPGA DIP_SWITCH_INPUT_REGISTER2 to get

arch/arm/mach-omap2/board-flash.h

@@ -23,10 +23,7 @@ struct flash_partitions {
 	int nr_parts;
 };
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) || IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_flash_init(struct flash_partitions [],
 				char chip_sel[][GPMC_CS_NUM], int nand_type);
 #else
@@ -36,8 +33,7 @@ static inline void board_flash_init(struct flash_partitions part[],
 }
 #endif
 
-#if defined(CONFIG_MTD_NAND_OMAP2) || \
-		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
 extern void board_nand_init(struct mtd_partition *nand_parts,
 		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
 extern struct gpmc_timings nand_default_timings[];
@@ -49,8 +45,7 @@ static inline void board_nand_init(struct mtd_partition *nand_parts,
 #define	nand_default_timings	NULL
 #endif
 
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-		defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
 extern void board_onenand_init(struct mtd_partition *nand_parts,
 					u8 nr_parts, u8 cs);
 #else

arch/arm/mach-omap2/board-n8x0.c

@@ -66,7 +66,7 @@ static void board_check_revision(void)
 		pr_err("Unknown board\n");
 }
 
-#if defined(CONFIG_USB_MUSB_TUSB6010) || defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
+#if IS_ENABLED(CONFIG_USB_MUSB_TUSB6010)
 /*
  * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
  * 1.5 V voltage regulators of PM companion chip. Companion chip will then
@@ -163,8 +163,7 @@ static struct spi_board_info n800_spi_board_info[] __initdata = {
 	},
 };
 
-#if defined(CONFIG_MENELAUS) &&						\
-	(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
+#if defined(CONFIG_MENELAUS) && IS_ENABLED(CONFIG_MMC_OMAP)
 
 /*
  * On both N800 and N810, only the first of the two MMC controllers is in use.

arch/arm/mach-omap2/common-board-devices.c

@@ -29,8 +29,7 @@
 #include "common.h"
 #include "common-board-devices.h"
 
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#if IS_ENABLED(CONFIG_TOUCHSCREEN_ADS7846)
 static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };

arch/arm/mach-omap2/devices.c

@@ -67,7 +67,7 @@ omap_postcore_initcall(omap3_l3_init);
 
 static inline void omap_init_sti(void) {}
 
-#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
+#if IS_ENABLED(CONFIG_SPI_OMAP24XX)
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
 
@@ -163,9 +163,8 @@ static void __init omap_init_aes(void)
 
 /*-------------------------------------------------------------------------*/
 
-#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
-	defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_VIDEO_OMAP2_VOUT)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
 };
 #else

arch/arm/mach-omap2/drm.c

@@ -28,7 +28,7 @@
 #include "soc.h"
 #include "display.h"
 
-#if defined(CONFIG_DRM_OMAP) || defined(CONFIG_DRM_OMAP_MODULE)
+#if IS_ENABLED(CONFIG_DRM_OMAP)
 
 static struct omap_drm_platform_data platform_data;
 

arch/arm/mach-omap2/fb.c

@@ -90,7 +90,7 @@ int __init omap_init_vrfb(void)
 int __init omap_init_vrfb(void) { return 0; }
 #endif
 
-#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+#if IS_ENABLED(CONFIG_FB_OMAP2)
 
 static u64 omap_fb_dma_mask = ~(u32)0;
 static struct omapfb_platform_data omapfb_config;

arch/arm/mach-omap2/gpmc-smsc911x.h

@@ -21,7 +21,7 @@ struct omap_smsc911x_platform_data {
 	u32	flags;
 };
 
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#if IS_ENABLED(CONFIG_SMSC911X)
 
 extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
 

arch/arm/mach-omap2/hsmmc.c

@@ -26,7 +26,7 @@
 #include "hsmmc.h"
 #include "control.h"
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 static u16 control_pbias_offset;
 static u16 control_devconf1_offset;

arch/arm/mach-omap2/hsmmc.h

@@ -28,7 +28,7 @@ struct omap2_hsmmc_info {
 	void (*init_card)(struct mmc_card *card);
 };
 
-#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if IS_ENABLED(CONFIG_MMC_OMAP_HS)
 
 void omap_hsmmc_init(struct omap2_hsmmc_info *);
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *);

arch/arm/mach-omap2/twl-common.c

@@ -532,8 +532,7 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
 }
 #endif /* CONFIG_ARCH_OMAP4 */
 
-#if defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030) || \
-	defined(CONFIG_SND_OMAP_SOC_OMAP_TWL4030_MODULE)
+#if IS_ENABLED(CONFIG_SND_OMAP_SOC_OMAP_TWL4030)
 #include <linux/platform_data/omap-twl4030.h>
 
 /* Commonly used configuration */