drivers: staging: vme: Fixed indention

Signed-off-by: Egor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/vme/devices/vme_pio2_cntr.c

@@ -61,7 +61,7 @@ int pio2_cntr_reset(struct pio2_card *card)
 	/* Ensure all counter interrupts are cleared */
 	do {
 		retval = vme_master_read(card->window, &reg, 1,
-			PIO2_REGS_INT_STAT_CNTR);
+					 PIO2_REGS_INT_STAT_CNTR);
 		if (retval < 0)
 			return retval;
 	} while (reg != 0);

drivers/staging/vme/devices/vme_pio2_core.c

@@ -90,7 +90,7 @@ static void pio2_int(int level, int vector, void *ptr)
 	case 4:
 		/* Channels 0 to 7 */
 		retval = vme_master_read(card->window, &reg, 1,
-			PIO2_REGS_INT_STAT[vec - 1]);
+					 PIO2_REGS_INT_STAT[vec - 1]);
 		if (retval < 0) {
 			dev_err(&card->vdev->dev,
 				"Unable to read IRQ status register\n");
@@ -100,8 +100,8 @@ static void pio2_int(int level, int vector, void *ptr)
 			channel = ((vec - 1) * 8) + i;
 			if (reg & PIO2_CHANNEL_BIT[channel])
 				dev_info(&card->vdev->dev,
-					"Interrupt on I/O channel %d\n",
-					channel);
+					 "Interrupt on I/O channel %d\n",
+					 channel);
 		}
 		break;
 	case 5:
@@ -289,7 +289,7 @@ static int pio2_probe(struct vme_dev *vdev)
 	}
 
 	retval = vme_master_set(card->window, 1, card->base, 0x10000, VME_A24,
-		(VME_SCT | VME_USER | VME_DATA), VME_D16);
+				(VME_SCT | VME_USER | VME_DATA), VME_D16);
 	if (retval) {
 		dev_err(&card->vdev->dev,
 			"Unable to configure VME master resource\n");
@@ -335,7 +335,7 @@ static int pio2_probe(struct vme_dev *vdev)
 
 	/* Set VME vector */
 	retval = vme_master_write(card->window, &card->irq_vector, 1,
-		PIO2_REGS_VME_VECTOR);
+				  PIO2_REGS_VME_VECTOR);
 	if (retval < 0)
 		return retval;
 
@@ -343,7 +343,7 @@ static int pio2_probe(struct vme_dev *vdev)
 	vec = card->irq_vector | PIO2_VME_VECTOR_SPUR;
 
 	retval = vme_irq_request(vdev, card->irq_level, vec,
-		&pio2_int, (void *)card);
+				 &pio2_int, (void *)card);
 	if (retval < 0) {
 		dev_err(&card->vdev->dev,
 			"Unable to attach VME interrupt vector0x%x, level 0x%x\n",
@@ -356,7 +356,7 @@ static int pio2_probe(struct vme_dev *vdev)
 		vec = card->irq_vector | PIO2_VECTOR_BANK[i];
 
 		retval = vme_irq_request(vdev, card->irq_level, vec,
-			&pio2_int, (void *)card);
+					 &pio2_int, (void *)card);
 		if (retval < 0) {
 			dev_err(&card->vdev->dev,
 				"Unable to attach VME interrupt vector0x%x, level 0x%x\n",
@@ -397,7 +397,7 @@ static int pio2_probe(struct vme_dev *vdev)
 	dev_set_drvdata(&card->vdev->dev, card);
 
 	dev_info(&card->vdev->dev,
-		"PIO2 (variant %s) configured at 0x%lx\n", card->variant,
+		 "PIO2 (variant %s) configured at 0x%lx\n", card->variant,
 		card->base);
 
 	return 0;

drivers/staging/vme/devices/vme_pio2_gpio.c

@@ -37,14 +37,14 @@ static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	struct pio2_card *card = gpio_to_pio2_card(chip);
 
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
-		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
+	    (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 
 		dev_err(&card->vdev->dev, "Channel not available as input\n");
 		return 0;
 	}
 
 	retval = vme_master_read(card->window, &reg, 1,
-		PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
+				 PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
 	if (retval < 0) {
 		dev_err(&card->vdev->dev, "Unable to read from GPIO\n");
 		return 0;
@@ -67,15 +67,15 @@ static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset)
 	return 0;
 }
 
-static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
-	int value)
+static void pio2_gpio_set(struct gpio_chip *chip,
+			  unsigned int offset, int value)
 {
 	u8 reg;
 	int retval;
 	struct pio2_card *card = gpio_to_pio2_card(chip);
 
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
-		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
+	    (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 
 		dev_err(&card->vdev->dev, "Channel not available as output\n");
 		return;
@@ -89,7 +89,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
 			~PIO2_CHANNEL_BIT[offset];
 
 	retval = vme_master_write(card->window, &reg, 1,
-		PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
+				  PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
 	if (retval < 0) {
 		dev_err(&card->vdev->dev, "Unable to write to GPIO\n");
 		return;
@@ -105,7 +105,7 @@ static int pio2_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
 	struct pio2_card *card = gpio_to_pio2_card(chip);
 
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
-		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
+	    (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 		dev_err(&card->vdev->dev,
 			"Channel directionality not configurable at runtime\n");
 
@@ -124,7 +124,7 @@ static int pio2_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
 	struct pio2_card *card = gpio_to_pio2_card(chip);
 
 	if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
-		(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
+	    (card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
 		dev_err(&card->vdev->dev,
 			"Channel directionality not configurable at runtime\n");
 
@@ -150,7 +150,7 @@ int pio2_gpio_reset(struct pio2_card *card)
 	/* Zero output registers */
 	for (i = 0; i < 4; i++) {
 		retval = vme_master_write(card->window, &data, 1,
-			PIO2_REGS_DATA[i]);
+					  PIO2_REGS_DATA[i]);
 		if (retval < 0)
 			return retval;
 		card->bank[i].value = 0;
@@ -159,12 +159,12 @@ int pio2_gpio_reset(struct pio2_card *card)
 	/* Set input interrupt masks */
 	for (i = 0; i < 4; i++) {
 		retval = vme_master_write(card->window, &data, 1,
-			PIO2_REGS_INT_MASK[i * 2]);
+					  PIO2_REGS_INT_MASK[i * 2]);
 		if (retval < 0)
 			return retval;
 
 		retval = vme_master_write(card->window, &data, 1,
-			PIO2_REGS_INT_MASK[(i * 2) + 1]);
+					  PIO2_REGS_INT_MASK[(i * 2) + 1]);
 		if (retval < 0)
 			return retval;
 
@@ -176,7 +176,7 @@ int pio2_gpio_reset(struct pio2_card *card)
 	for (i = 0; i < 4; i++) {
 		do {
 			retval = vme_master_read(card->window, &data, 1,
-				PIO2_REGS_INT_STAT[i]);
+						 PIO2_REGS_INT_STAT[i]);
 			if (retval < 0)
 				return retval;
 		} while (data != 0);