Merge tag 'v3.13-rc3' into dt3-base

Linux 3.13-rc3

Conflicts:
	drivers/pinctrl/sh-pfc/pfc-r8a7740.c
	drivers/pinctrl/sh-pfc/pfc-sh7372.c

Documentation/devicetree/bindings/arm/omap/mpu.txt

@@ -7,10 +7,18 @@ The MPU contain CPUs, GIC, L2 cache and a local PRCM.
 Required properties:
 - compatible : Should be "ti,omap3-mpu" for OMAP3
                Should be "ti,omap4-mpu" for OMAP4
+	       Should be "ti,omap5-mpu" for OMAP5
 - ti,hwmods: "mpu"
 
 Examples:
 
+- For an OMAP5 SMP system:
+
+mpu {
+    compatible = "ti,omap5-mpu";
+    ti,hwmods = "mpu"
+};
+
 - For an OMAP4 SMP system:
 
 mpu {

Documentation/devicetree/bindings/arm/pmu.txt

@@ -7,6 +7,7 @@ representation in the device tree should be done as under:-
 Required properties:
 
 - compatible : should be one of
+	"arm,armv8-pmuv3"
 	"arm,cortex-a15-pmu"
 	"arm,cortex-a9-pmu"
 	"arm,cortex-a8-pmu"

Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt

@@ -49,7 +49,7 @@ adc@12D10000 {
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
 		compatible = "ntc,ncp15wb473";
-		pullup-uV = <1800000>;
+		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;

Documentation/devicetree/bindings/clock/exynos4-clock.txt

@@ -6,7 +6,7 @@ SoC's in the Exynos4 family.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos4210-clock" - controller compatible with Exynos4210 SoC.
   - "samsung,exynos4412-clock" - controller compatible with Exynos4412 SoC.
 

Documentation/devicetree/bindings/clock/exynos5250-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5250 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5250-clock" - controller compatible with Exynos5250 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5420-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5420 SoC.
 
 Required Properties:
 
-- comptible: should be one of the following.
+- compatible: should be one of the following.
   - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
 
 - reg: physical base address of the controller and length of memory mapped

Documentation/devicetree/bindings/clock/exynos5440-clock.txt

@@ -5,7 +5,7 @@ controllers within the Exynos5440 SoC.
 
 Required Properties:
 
-- comptible: should be "samsung,exynos5440-clock".
+- compatible: should be "samsung,exynos5440-clock".
 
 - reg: physical base address of the controller and length of memory mapped
   region.

Documentation/devicetree/bindings/gpio/8xxx_gpio.txt

@@ -5,16 +5,42 @@ This is for the non-QE/CPM/GUTs GPIO controllers as found on
 
 Every GPIO controller node must have #gpio-cells property defined,
 this information will be used to translate gpio-specifiers.
+See bindings/gpio/gpio.txt for details of how to specify GPIO
+information for devices.
+
+The GPIO module usually is connected to the SoC's internal interrupt
+controller, see bindings/interrupt-controller/interrupts.txt (the
+interrupt client nodes section) for details how to specify this GPIO
+module's interrupt.
+
+The GPIO module may serve as another interrupt controller (cascaded to
+the SoC's internal interrupt controller).  See the interrupt controller
+nodes section in bindings/interrupt-controller/interrupts.txt for
+details.
 
 Required properties:
-- compatible : "fsl,<CHIP>-gpio" followed by "fsl,mpc8349-gpio" for
-  83xx, "fsl,mpc8572-gpio" for 85xx and "fsl,mpc8610-gpio" for 86xx.
-- #gpio-cells : Should be two. The first cell is the pin number and the
-  second cell is used to specify optional parameters (currently unused).
- - interrupts : Interrupt mapping for GPIO IRQ.
- - interrupt-parent : Phandle for the interrupt controller that
-   services interrupts for this device.
-- gpio-controller : Marks the port as GPIO controller.
+- compatible:		"fsl,<chip>-gpio" followed by "fsl,mpc8349-gpio"
+			for 83xx, "fsl,mpc8572-gpio" for 85xx, or
+			"fsl,mpc8610-gpio" for 86xx.
+- #gpio-cells:		Should be two. The first cell is the pin number
+			and the second cell is used to specify optional
+			parameters (currently unused).
+- interrupt-parent:	Phandle for the interrupt controller that
+			services interrupts for this device.
+- interrupts:		Interrupt mapping for GPIO IRQ.
+- gpio-controller:	Marks the port as GPIO controller.
+
+Optional properties:
+- interrupt-controller:	Empty boolean property which marks the GPIO
+			module as an IRQ controller.
+- #interrupt-cells:	Should be two.  Defines the number of integer
+			cells required to specify an interrupt within
+			this interrupt controller.  The first cell
+			defines the pin number, the second cell
+			defines additional flags (trigger type,
+			trigger polarity).  Note that the available
+			set of trigger conditions supported by the
+			GPIO module depends on the actual SoC.
 
 Example of gpio-controller nodes for a MPC8347 SoC:
 
@@ -22,39 +48,27 @@ Example of gpio-controller nodes for a MPC8347 SoC:
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xc00 0x100>;
-		interrupts = <74 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <74 0x8>;
 		gpio-controller;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 	};
 
 	gpio2: gpio-controller@d00 {
 		#gpio-cells = <2>;
 		compatible = "fsl,mpc8347-gpio", "fsl,mpc8349-gpio";
 		reg = <0xd00 0x100>;
-		interrupts = <75 0x8>;
 		interrupt-parent = <&ipic>;
+		interrupts = <75 0x8>;
 		gpio-controller;
 	};
 
-See booting-without-of.txt for details of how to specify GPIO
-information for devices.
-
-To use GPIO pins as interrupt sources for peripherals, specify the
-GPIO controller as the interrupt parent and define GPIO number +
-trigger mode using the interrupts property, which is defined like
-this:
-
-interrupts = <number trigger>, where:
- - number: GPIO pin (0..31)
- - trigger: trigger mode:
-	2 = trigger on falling edge
-	3 = trigger on both edges
-
-Example of device using this is:
+Example of a peripheral using the GPIO module as an IRQ controller:
 
 	funkyfpga@0 {
 		compatible = "funky-fpga";
 		...
-		interrupts = <4 3>;
 		interrupt-parent = <&gpio1>;
+		interrupts = <4 3>;
 	};

Documentation/devicetree/bindings/mmc/ti-omap.txt

@@ -0,0 +1,54 @@
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+
+* TI MMC host controller for OMAP1 and 2420
+
+The MMC Host Controller on TI OMAP1 and 2420 family provides
+an interface for MMC, SD, and SDIO types of memory cards.
+
+This file documents differences between the core properties described
+by mmc.txt and the properties used by the omap mmc driver.
+
+Note that this driver will not work with omap2430 or later omaps,
+please see the omap hsmmc driver for the current omaps.
+
+Required properties:
+- compatible: Must be "ti,omap2420-mmc", for OMAP2420 controllers
+- ti,hwmods: For 2420, must be "msdi<n>", where n is controller
+  instance starting 1
+
+Examples:
+
+	msdi1: mmc@4809c000 {
+		compatible = "ti,omap2420-mmc";
+		ti,hwmods = "msdi1";
+		reg = <0x4809c000 0x80>;
+		interrupts = <83>;
+		dmas = <&sdma 61 &sdma 62>;
+		dma-names = "tx", "rx";
+	};
+

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -15,6 +15,7 @@ Optional properties:
   only if property "phy-reset-gpios" is available.  Missing the property
   will have the duration be 1 millisecond.  Numbers greater than 1000 are
   invalid and 1 millisecond will be used instead.
+- phy-supply: regulator that powers the Ethernet PHY.
 
 Example:
 
@@ -25,4 +26,5 @@ ethernet@83fec000 {
 	phy-mode = "mii";
 	phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */
 	local-mac-address = [00 04 9F 01 1B B9];
+	phy-supply = <&reg_fec_supply>;
 };

Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt

@@ -1,5 +0,0 @@
-NVIDIA Tegra 2 SPI device
-
-Required properties:
-- compatible : should be "nvidia,tegra20-spi".
-- gpios : should specify GPIOs used for chipselect.

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -32,12 +32,14 @@ est	ESTeem Wireless Modems
 fsl	Freescale Semiconductor
 GEFanuc	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
 gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.
+gmt	Global Mixed-mode Technology, Inc.
 hisilicon	Hisilicon Limited.
 hp	Hewlett Packard
 ibm	International Business Machines (IBM)
 idt	Integrated Device Technologies, Inc.
 img	Imagination Technologies Ltd.
 intercontrol	Inter Control Group
+lg	LG Corporation
 linux	Linux-specific binding
 lsi	LSI Corp. (LSI Logic)
 marvell	Marvell Technology Group Ltd.

Documentation/gpio/00-INDEX

@@ -0,0 +1,14 @@
+00-INDEX
+	- This file
+gpio.txt
+	- Introduction to GPIOs and their kernel interfaces
+consumer.txt
+	- How to obtain and use GPIOs in a driver
+driver.txt
+	- How to write a GPIO driver
+board.txt
+	- How to assign GPIOs to a consumer device and a function
+sysfs.txt
+	- Information about the GPIO sysfs interface
+gpio-legacy.txt
+	- Historical documentation of the deprecated GPIO integer interface

MAINTAINERS

@@ -1934,7 +1934,8 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@fusionio.com>
+M:	Chris Mason <clm@fb.com>
+M:	Josef Bacik <jbacik@fb.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
@@ -4049,6 +4050,12 @@ W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
+HSR NETWORK PROTOCOL
+M:	Arvid Brodin <arvid.brodin@alten.se>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	net/hsr/
+
 HTCPEN TOUCHSCREEN DRIVER
 M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
@@ -5261,7 +5268,7 @@ S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
 F:	include/linux/lockdep.h
-F:	kernel/lockdep*
+F:	kernel/locking/
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
 M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
@@ -5973,10 +5980,10 @@ F:	drivers/nfc/
 F:	include/linux/platform_data/pn544.h
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-M:	Trond Myklebust <Trond.Myklebust@netapp.com>
+M:	Trond Myklebust <trond.myklebust@primarydata.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
-T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
+T:	git git://git.linux-nfs.org/projects/trondmy/linux-nfs.git
 S:	Maintained
 F:	fs/lockd/
 F:	fs/nfs/
@@ -6243,8 +6250,8 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <rob.herring@calxeda.com>
 M:	Pawel Moll <pawel.moll@arm.com>
 M:	Mark Rutland <mark.rutland@arm.com>
-M:	Stephen Warren <swarren@wwwdotorg.org>
 M:	Ian Campbell <ijc+devicetree@hellion.org.uk>
+M:	Kumar Gala <galak@codeaurora.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/
@@ -7385,7 +7392,6 @@ S:	Maintained
 F:	kernel/sched/
 F:	include/linux/sched.h
 F:	include/uapi/linux/sched.h
-F:	kernel/wait.c
 F:	include/linux/wait.h
 
 SCORE ARCHITECTURE

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = One Giant Leap for Frogkind
 
 # *DOCUMENTATION*

arch/arm/boot/dts/am335x-base0033.dts

@@ -13,4 +13,83 @@
 / {
 	model = "IGEP COM AM335x on AQUILA Expansion";
 	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
 };

arch/arm/boot/dts/am335x-igep0033.dtsi

@@ -199,6 +199,35 @@
 	pinctrl-0 = <&uart0_pins>;
 };
 
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
 #include "tps65910.dtsi"
 
 &tps {

arch/arm/boot/dts/armada-370-db.dts

@@ -99,22 +99,22 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+		};
 
-			pcie-controller {
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * both standard PCIe slots and mini-PCIe
+			 * slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
 				status = "okay";
-				/*
-				 * The two PCIe units are accessible through
-				 * both standard PCIe slots and mini-PCIe
-				 * slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
 			};
 		};
 	};

arch/arm/boot/dts/armada-370-xp.dtsi

@@ -118,7 +118,7 @@
 
 			coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
 			serial@12000 {

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -47,7 +47,7 @@
 		/*
 		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x1 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -62,10 +62,10 @@
 
 			ranges =
 			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
 				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
 				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -74,8 +74,8 @@
 				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -145,20 +145,20 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -48,7 +48,7 @@
 		/*
 		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x4 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -68,7 +68,9 @@
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
 				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
 				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -77,10 +79,18 @@
 				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -106,8 +116,8 @@
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -150,37 +160,88 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
+				clocks = <&gateclk 26>;
 				status = "disabled";
 			};
 		};

arch/arm/boot/dts/at91sam9x5_usart3.dtsi

@@ -11,6 +11,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	aliases {
+		serial4 = &usart3;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff400 {

arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi

@@ -44,8 +44,8 @@
 		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
 		reg-io-width = <4>;
 		smsc,save-mac-address;
 	};

arch/arm/boot/dts/omap3-beagle-xm.dts

@@ -215,3 +215,10 @@
 &usbhsehci {
 	phys = <0 &hsusb2_phy>;
 };
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/omap3-beagle.dts

@@ -61,6 +61,14 @@
 		vcc-supply = <&hsusb2_power>;
 	};
 
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -120,6 +128,12 @@
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
 	};
 };
 
@@ -178,3 +192,10 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};

arch/arm/boot/dts/omap3-igep.dtsi

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
 
 / {
 	memory {
@@ -24,6 +24,25 @@
 		ti,mcbsp = <&mcbsp2>;
 		ti,codec = <&twl_audio>;
 	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+	lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lbee1usjyc_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 WIFI_PDN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&vdd33>;
+	};
 };
 
 &omap3_pmx_core {
@@ -48,6 +67,15 @@
 		>;
 	};
 
+	/* WiFi/BT combo */
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			0x136 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 */
+			0x138 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+			0x13a (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
@@ -65,10 +93,17 @@
 			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
@@ -78,10 +113,33 @@
 		>;
 	};
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
+			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			0x190 (PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
 	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -101,9 +159,16 @@
 #include "twl4030_omap3.dtsi"
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
@@ -114,11 +179,15 @@
       pinctrl-0 = <&mmc1_pins>;
       vmmc-supply = <&vmmc1>;
       vmmc_aux-supply = <&vsim>;
-      bus-width = <8>;
+      bus-width = <4>;
 };
 
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&lbee1usjyc_vmmc>;
+	bus-width = <4>;
+	non-removable;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3-igep0020.dts

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -13,7 +13,7 @@
 #include "omap-gpmc-smsc911x.dtsi"
 
 / {
-	model = "IGEPv2";
+	model = "IGEPv2 (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
@@ -67,6 +67,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 		&hsusbb1_pins
+		&tfp410_pins
+		&dss_pins
 	>;
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -85,6 +87,45 @@
 			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
 		>;
 	};
+
+	tfp410_pins: tfp410_dvi_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_pins: pinmux_dss_dvi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
 };
 
 &leds_pins {
@@ -174,3 +215,8 @@
 &usbhsehci {
 	phys = <&hsusb1_phy>;
 };
+
+&vpll2 {
+        /* Needed for DSS */
+        regulator-name = "vdds_dsi";
+};

arch/arm/boot/dts/omap3-igep0030.dts

@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -12,7 +12,7 @@
 #include "omap3-igep.dtsi"
 
 / {
-	model = "IGEP COM Module";
+	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {

arch/arm/boot/dts/omap3-n900.dts

@@ -125,6 +125,21 @@
 		>;
 	};
 
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
 	display_pins: pinmux_display_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };
 
+/* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vaux3>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+	non-removable;
 };
 
 &mmc3 {

arch/arm/boot/dts/omap3.dtsi

@@ -82,6 +82,13 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480c5000 {
+			compatible = "ti,omap3-aes";
+			ti,hwmods = "aes";
+			reg = <0x480c5000 0x50>;
+			interrupts = <0>;
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -260,6 +267,13 @@
 			ti,hwmods = "i2c3";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			reg = <0x48098000 0x100>;
@@ -357,6 +371,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_isp: mmu@480bd400 {
+			compatible = "ti,omap3-mmu-isp";
+			ti,hwmods = "mmu_isp";
+			reg = <0x480bd400 0x80>;
+			interrupts = <8>;
+		};
+
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
 			reg = <0x48314000 0x80>;
@@ -442,6 +463,27 @@
 			dma-names = "tx", "rx";
 		};
 
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+		};
+
+		smartreflex_core: smartreflex@480cb000 {
+			compatible = "ti,omap3-smartreflex-core";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb000 0x400>;
+			interrupts = <19>;
+		};
+
+		smartreflex_mpu_iva: smartreflex@480c9000 {
+			compatible = "ti,omap3-smartreflex-iva";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9000 0x400>;
+			interrupts = <18>;
+		};
+
 		timer1: timer@48318000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x48318000 0x400>;

arch/arm/boot/dts/omap4-panda-common.dtsi

@@ -246,15 +246,6 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
 
 	/*
 	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
 		pinctrl-single,pins = <
 			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
 			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
 			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
 			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
 	};
 };
 
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;

arch/arm/boot/dts/omap4-sdp.dts

@@ -300,12 +300,12 @@
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };

arch/arm/boot/dts/socfpga.dtsi

@@ -245,14 +245,14 @@
 
 					mpu_periph_clk: mpu_periph_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <4>;
 					};
 
 					mpu_l2_ram_clk: mpu_l2_ram_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <2>;
 					};
@@ -266,8 +266,9 @@
 
 					l3_main_clk: l3_main_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mainclk>;
+						fixed-divider = <1>;
 					};
 
 					l3_mp_clk: l3_mp_clk {

arch/arm/configs/multi_v7_defconfig

@@ -69,6 +69,7 @@ CONFIG_KS8851=y
 CONFIG_SMSC911X=y
 CONFIG_STMMAC_ETH=y
 CONFIG_MDIO_SUN4I=y
+CONFIG_TI_CPSW=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
@@ -133,12 +134,14 @@ CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ISP1301=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
 CONFIG_MMC_ARMMMCI=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
 CONFIG_MMC_SDHCI_TEGRA=y
 CONFIG_MMC_SDHCI_SPEAR=y
+CONFIG_MMC_SDHCI_BCM_KONA=y
 CONFIG_MMC_OMAP=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_EDAC=y

arch/arm/configs/omap2plus_defconfig

@@ -173,6 +173,7 @@ CONFIG_MFD_PALMAS=y
 CONFIG_MFD_TPS65217=y
 CONFIG_MFD_TPS65910=y
 CONFIG_TWL6040_CORE=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_PALMAS=y
 CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y

arch/arm/configs/sunxi_defconfig

@@ -12,6 +12,9 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
@@ -58,4 +61,8 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
 CONFIG_NLS=y
+CONFIG_PRINTK_TIME=y

arch/arm/configs/u8500_defconfig

@@ -22,6 +22,7 @@ CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 CONFIG_CPU_IDLE=y
+CONFIG_ARM_U8500_CPUIDLE=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_PM_RUNTIME=y
@@ -109,6 +110,8 @@ CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set

arch/arm/include/asm/pgtable.h

@@ -61,7 +61,7 @@ extern void __pgd_error(const char *file, int line, pgd_t);
  * mapping to be mapped at.  This is particularly important for
  * non-high vector CPUs.
  */
-#define FIRST_USER_ADDRESS	PAGE_SIZE
+#define FIRST_USER_ADDRESS	(PAGE_SIZE * 2)
 
 /*
  * Use TASK_SIZE as the ceiling argument for free_pgtables() and

arch/arm/kernel/machine_kexec.c

@@ -14,11 +14,12 @@
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
+#include <asm/fncpy.h>
 #include <asm/mach-types.h>
 #include <asm/smp_plat.h>
 #include <asm/system_misc.h>
 
-extern const unsigned char relocate_new_kernel[];
+extern void relocate_new_kernel(void);
 extern const unsigned int relocate_new_kernel_size;
 
 extern unsigned long kexec_start_address;
@@ -142,6 +143,8 @@ void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list;
 	unsigned long reboot_code_buffer_phys;
+	unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
+	unsigned long reboot_entry_phys;
 	void *reboot_code_buffer;
 
 	/*
@@ -168,16 +171,16 @@ void machine_kexec(struct kimage *image)
 
 
 	/* copy our kernel relocation code to the control code page */
-	memcpy(reboot_code_buffer,
-	       relocate_new_kernel, relocate_new_kernel_size);
+	reboot_entry = fncpy(reboot_code_buffer,
+			     reboot_entry,
+			     relocate_new_kernel_size);
+	reboot_entry_phys = (unsigned long)reboot_entry +
+		(reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
 
-
-	flush_icache_range((unsigned long) reboot_code_buffer,
-			   (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE);
 	printk(KERN_INFO "Bye!\n");
 
 	if (kexec_reinit)
 		kexec_reinit();
 
-	soft_restart(reboot_code_buffer_phys);
+	soft_restart(reboot_entry_phys);
 }

arch/arm/kernel/relocate_kernel.S

@@ -2,10 +2,12 @@
  * relocate_kernel.S - put the kernel image in place to boot
  */
 
+#include <linux/linkage.h>
 #include <asm/kexec.h>
 
-	.globl relocate_new_kernel
-relocate_new_kernel:
+	.align	3	/* not needed for this code, but keeps fncpy() happy */
+
+ENTRY(relocate_new_kernel)
 
 	ldr	r0,kexec_indirection_page
 	ldr	r1,kexec_start_address
@@ -79,6 +81,8 @@ kexec_mach_type:
 kexec_boot_atags:
 	.long	0x0
 
+ENDPROC(relocate_new_kernel)
+
 relocate_new_kernel_end:
 
 	.globl relocate_new_kernel_size

arch/arm/kernel/sigreturn_codes.S

@@ -30,6 +30,27 @@
  * snippets.
  */
 
+/*
+ * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
+ * Note in this case codes skips those instructions but it uses .org
+ * directive to keep correct layout of sigreturn_codes array.
+ */
+#ifndef CONFIG_CPU_THUMBONLY
+#define ARM_OK(code...)	code
+#else
+#define ARM_OK(code...)
+#endif
+
+	.macro arm_slot n
+	.org	sigreturn_codes + 12 * (\n)
+ARM_OK(	.arm	)
+	.endm
+
+	.macro thumb_slot n
+	.org	sigreturn_codes + 12 * (\n) + 8
+	.thumb
+	.endm
+
 #if __LINUX_ARM_ARCH__ <= 4
 	/*
 	 * Note we manually set minimally required arch that supports
@@ -45,26 +66,27 @@
 	.global sigreturn_codes
 	.type	sigreturn_codes, #object
 
-	.arm
+	.align
 
 sigreturn_codes:
 
 	/* ARM sigreturn syscall code snippet */
-	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 0
+ARM_OK(	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn syscall code snippet */
-	.thumb
+	thumb_slot 0
 	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
 	/* ARM sigreturn_rt syscall code snippet */
-	.arm
-	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 1
+ARM_OK(	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn_rt syscall code snippet */
-	.thumb
+	thumb_slot 1
 	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
@@ -74,7 +96,7 @@ sigreturn_codes:
 	 * it is thumb case or not, so we need additional
 	 * word after real last entry.
 	 */
-	.arm
+	arm_slot 2
 	.space	4
 
 	.size	sigreturn_codes, . - sigreturn_codes

arch/arm/lib/delay-loop.S

@@ -40,6 +40,7 @@ ENTRY(__loop_const_udelay)			@ 0 <= r0 <= 0x7fffff06
 /*
  * loops = r0 * HZ * loops_per_jiffy / 1000000
  */
+		.align 3
 
 @ Delay routine
 ENTRY(__loop_delay)

arch/arm/mach-at91/at91rm9200_time.c

@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
 	.name		= "at91_tick",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 150,
 	.set_next_event	= clkevt32k_next_event,
 	.set_mode	= clkevt32k_mode,
@@ -265,11 +264,9 @@ void __init at91rm9200_timer_init(void)
 	at91_st_write(AT91_ST_RTMR, 1);
 
 	/* Setup timer clockevent, with minimum of two ticks (important!!) */
-	clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-	clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-	clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
 	clkevt.cpumask = cpumask_of(0);
-	clockevents_register_device(&clkevt);
+	clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+					2, AT91_ST_ALMV);
 
 	/* register clocksource */
 	clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);

arch/arm/mach-at91/pm.h

@@ -16,7 +16,11 @@
 #include <mach/at91_ramc.h>
 #include <mach/at91rm9200_sdramc.h>
 
+#ifdef CONFIG_PM
 extern void at91_pm_set_standby(void (*at91_standby)(void));
+#else
+static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
+#endif
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will

arch/arm/mach-at91/sama5d3.c

@@ -95,19 +95,19 @@ static struct clk twi0_clk = {
 	.name		= "twi0_clk",
 	.pid		= SAMA5D3_ID_TWI0,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi1_clk = {
 	.name		= "twi1_clk",
 	.pid		= SAMA5D3_ID_TWI1,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk twi2_clk = {
 	.name		= "twi2_clk",
 	.pid		= SAMA5D3_ID_TWI2,
 	.type		= CLK_TYPE_PERIPHERAL,
-	.div		= AT91_PMC_PCR_DIV2,
+	.div		= AT91_PMC_PCR_DIV8,
 };
 static struct clk mmc0_clk = {
 	.name		= "mci0_clk",

arch/arm/mach-footbridge/common.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <video/vga.h>
 
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -196,6 +197,8 @@ void __init footbridge_map_io(void)
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 		pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO));
 	}
+
+	vga_base = PCIMEM_BASE;
 }
 
 void footbridge_restart(enum reboot_mode mode, const char *cmd)

arch/arm/mach-footbridge/dc21285.c

@@ -18,7 +18,6 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
-#include <video/vga.h>
 
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
@@ -291,7 +290,6 @@ void __init dc21285_preinit(void)
 	int cfn_mode;
 
 	pcibios_min_mem = 0x81000000;
-	vga_base = PCIMEM_BASE;
 
 	mem_size = (unsigned int)high_memory - PAGE_OFFSET;
 	for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)

arch/arm/mach-footbridge/ebsa285.c

@@ -30,21 +30,24 @@ static const struct {
 	const char *name;
 	const char *trigger;
 } ebsa285_leds[] = {
-	{ "ebsa285:amber", "heartbeat", },
-	{ "ebsa285:green", "cpu0", },
+	{ "ebsa285:amber", "cpu0", },
+	{ "ebsa285:green", "heartbeat", },
 	{ "ebsa285:red",},
 };
 
+static unsigned char hw_led_state;
+
 static void ebsa285_led_set(struct led_classdev *cdev,
 		enum led_brightness b)
 {
 	struct ebsa285_led *led = container_of(cdev,
 			struct ebsa285_led, cdev);
 
-	if (b != LED_OFF)
-		*XBUS_LEDS |= led->mask;
+	if (b == LED_OFF)
+		hw_led_state |= led->mask;
 	else
-		*XBUS_LEDS &= ~led->mask;
+		hw_led_state &= ~led->mask;
+	*XBUS_LEDS = hw_led_state;
 }
 
 static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
@@ -52,18 +55,19 @@ static enum led_brightness ebsa285_led_get(struct led_classdev *cdev)
 	struct ebsa285_led *led = container_of(cdev,
 			struct ebsa285_led, cdev);
 
-	return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF;
+	return hw_led_state & led->mask ? LED_OFF : LED_FULL;
 }
 
 static int __init ebsa285_leds_init(void)
 {
 	int i;
 
-	if (machine_is_ebsa285())
+	if (!machine_is_ebsa285())
 		return -ENODEV;
 
-	/* 3 LEDS All ON */
-	*XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+	/* 3 LEDS all off */
+	hw_led_state = XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED;
+	*XBUS_LEDS = hw_led_state;
 
 	for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) {
 		struct ebsa285_led *led;

arch/arm/mach-omap2/dss-common.c

@@ -223,7 +223,7 @@ void __init omap_4430sdp_display_init_of(void)
 static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = {
 	.name                   = "dvi",
 	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
+	.i2c_bus_num            = 2,
 };
 
 static struct platform_device omap3_igep2_dvi_connector_device = {

arch/arm/mach-omap2/pdata-quirks.c

@@ -139,6 +139,7 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
 
 static struct pdata_init pdata_quirks[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP3
+	{ "nokia,omap3-n900", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
 	{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
 	{ "isee,omap3-igep0020", omap3_igep0020_legacy_init, },

arch/arm/mach-omap2/powerdomain.c

@@ -128,7 +128,8 @@ skip_voltdm:
 	for (i = 0; i < pwrdm->banks; i++)
 		pwrdm->ret_mem_off_counter[i] = 0;
 
-	arch_pwrdm->pwrdm_wait_transition(pwrdm);
+	if (arch_pwrdm && arch_pwrdm->pwrdm_wait_transition)
+		arch_pwrdm->pwrdm_wait_transition(pwrdm);
 	pwrdm->state = pwrdm_read_pwrst(pwrdm);
 	pwrdm->state_counter[pwrdm->state] = 1;
 

arch/arm/mach-socfpga/Kconfig

@@ -10,6 +10,7 @@ config ARCH_SOCFPGA
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PL061 if GPIOLIB
 	select HAVE_ARM_SCU
+	select HAVE_ARM_TWD if SMP
 	select HAVE_SMP
 	select MFD_SYSCON
 	select SPARSE_IRQ

arch/arm/mach-ux500/cpu-db8500.c

@@ -140,6 +140,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
+	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  &mop500_sdi0_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  &mop500_sdi1_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  &mop500_sdi2_data),
+	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  &mop500_sdi4_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
 		       "ux500-msp-i2s.0", &msp0_platform_data),
 	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,

arch/arm/mm/dma-mapping.c

@@ -9,6 +9,7 @@
  *
  *  DMA uncached mapping support.
  */
+#include <linux/bootmem.h>
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/gfp.h>
@@ -162,6 +163,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
 	u64 mask = (u64)DMA_BIT_MASK(32);
 
 	if (dev) {
+		unsigned long max_dma_pfn;
+
 		mask = dev->coherent_dma_mask;
 
 		/*
@@ -173,6 +176,8 @@ static u64 get_coherent_dma_mask(struct device *dev)
 			return 0;
 		}
 
+		max_dma_pfn = min(max_pfn, arm_dma_pfn_limit);
+
 		/*
 		 * If the mask allows for more memory than we can address,
 		 * and we actually have that much memory, then fail the
@@ -180,7 +185,7 @@ static u64 get_coherent_dma_mask(struct device *dev)
 		 */
 		if (sizeof(mask) != sizeof(dma_addr_t) &&
 		    mask > (dma_addr_t)~0 &&
-		    dma_to_pfn(dev, ~0) > arm_dma_pfn_limit) {
+		    dma_to_pfn(dev, ~0) > max_dma_pfn) {
 			dev_warn(dev, "Coherent DMA mask %#llx is larger than dma_addr_t allows\n",
 				 mask);
 			dev_warn(dev, "Driver did not use or check the return value from dma_set_coherent_mask()?\n");
@@ -192,7 +197,7 @@ static u64 get_coherent_dma_mask(struct device *dev)
 		 * fits within the allowable addresses which we can
 		 * allocate.
 		 */
-		if (dma_to_pfn(dev, mask) < arm_dma_pfn_limit) {
+		if (dma_to_pfn(dev, mask) < max_dma_pfn) {
 			dev_warn(dev, "Coherent DMA mask %#llx (pfn %#lx-%#lx) covers a smaller range of system memory than the DMA zone pfn 0x0-%#lx\n",
 				 mask,
 				 dma_to_pfn(dev, 0), dma_to_pfn(dev, mask) + 1,

arch/arm/mm/mmap.c

@@ -146,7 +146,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
 
 	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
 	info.length = len;
-	info.low_limit = PAGE_SIZE;
+	info.low_limit = FIRST_USER_ADDRESS;
 	info.high_limit = mm->mmap_base;
 	info.align_mask = do_align ? (PAGE_MASK & (SHMLBA - 1)) : 0;
 	info.align_offset = pgoff << PAGE_SHIFT;

arch/arm/mm/pgd.c

@@ -87,7 +87,8 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
 		init_pud = pud_offset(init_pgd, 0);
 		init_pmd = pmd_offset(init_pud, 0);
 		init_pte = pte_offset_map(init_pmd, 0);
-		set_pte_ext(new_pte, *init_pte, 0);
+		set_pte_ext(new_pte + 0, init_pte[0], 0);
+		set_pte_ext(new_pte + 1, init_pte[1], 0);
 		pte_unmap(init_pte);
 		pte_unmap(new_pte);
 	}

arch/arm/plat-omap/include/plat/dmtimer.h

@@ -336,8 +336,11 @@ static inline void __omap_dm_timer_enable_posted(struct omap_dm_timer *timer)
 	if (timer->posted)
 		return;
 
-	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767)
+	if (timer->errata & OMAP_TIMER_ERRATA_I103_I767) {
+		timer->posted = OMAP_TIMER_NONPOSTED;
+		__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG, 0, 0);
 		return;
+	}
 
 	__omap_dm_timer_write(timer, OMAP_TIMER_IF_CTRL_REG,
 			      OMAP_TIMER_CTRL_POSTED, 0);

arch/arm/xen/p2m.c

@@ -25,8 +25,9 @@ struct xen_p2m_entry {
 	struct rb_node rbnode_phys;
 };
 
-rwlock_t p2m_lock;
+static rwlock_t p2m_lock;
 struct rb_root phys_to_mach = RB_ROOT;
+EXPORT_SYMBOL_GPL(phys_to_mach);
 static struct rb_root mach_to_phys = RB_ROOT;
 
 static int xen_add_phys_to_mach_entry(struct xen_p2m_entry *new)
@@ -200,7 +201,7 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 }
 EXPORT_SYMBOL_GPL(__set_phys_to_machine);
 
-int p2m_init(void)
+static int p2m_init(void)
 {
 	rwlock_init(&p2m_lock);
 	return 0;

arch/parisc/configs/c3000_defconfig

@@ -50,7 +50,7 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=m
+CONFIG_PATA_SIL680=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y

arch/parisc/configs/c8000_defconfig

@@ -20,7 +20,6 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
@@ -81,8 +80,6 @@ CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_PLATFORM=y
 CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_BLK_DEV_SR=m
@@ -94,6 +91,8 @@ CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_SAS_LIBSAS=m
 CONFIG_ISCSI_TCP=m
 CONFIG_ISCSI_BOOT_SYSFS=m
+CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=y
 CONFIG_FUSION_SAS=y
@@ -114,9 +113,8 @@ CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_HIL_OLD is not set
 # CONFIG_KEYBOARD_HIL is not set
-CONFIG_MOUSE_PS2=m
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_INPUT_MISC=y
-CONFIG_INPUT_CM109=m
 CONFIG_SERIO_SERPORT=m
 CONFIG_SERIO_PARKBD=m
 CONFIG_SERIO_GSCPS2=m
@@ -167,34 +165,6 @@ CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_AD1889=m
 # CONFIG_SND_USB is not set
 # CONFIG_SND_GSC is not set
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_DRAGONRISE=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_HID_KENSINGTON=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_LOGITECH_DJ=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_NTRIG=m
-CONFIG_HID_ORTEK=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_HID_ZEROPLUS=m
-CONFIG_USB_HID=m
 CONFIG_USB=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y

arch/parisc/configs/generic-64bit_defconfig

@@ -24,7 +24,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
 # CONFIG_IOSCHED_DEADLINE is not set
 CONFIG_PA8X00=y
-CONFIG_MLONGCALLS=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 # CONFIG_COMPACTION is not set
@@ -68,7 +67,6 @@ CONFIG_IDE_GD=m
 CONFIG_IDE_GD_ATAPI=y
 CONFIG_BLK_DEV_IDECD=m
 CONFIG_BLK_DEV_NS87415=y
-CONFIG_BLK_DEV_SIIMAGE=y
 # CONFIG_SCSI_PROC_FS is not set
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
@@ -82,6 +80,7 @@ CONFIG_SCSI_ZALON=y
 CONFIG_SCSI_QLA_ISCSI=m
 CONFIG_SCSI_DH=y
 CONFIG_ATA=y
+CONFIG_PATA_SIL680=y
 CONFIG_ATA_GENERIC=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
@@ -162,7 +161,7 @@ CONFIG_SLIP_MODE_SLIP6=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
 # CONFIG_KEYBOARD_HIL is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_MOUSE_PS2 is not set
 CONFIG_INPUT_MISC=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_HP_SDC is not set
@@ -216,32 +215,7 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_HID=m
 CONFIG_HIDRAW=y
-CONFIG_HID_DRAGONRISE=m
-CONFIG_DRAGONRISE_FF=y
-CONFIG_HID_KYE=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_TWINHAN=m
-CONFIG_LOGITECH_FF=y
-CONFIG_LOGIRUMBLEPAD2_FF=y
-CONFIG_HID_NTRIG=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_PANTHERLORD_FF=y
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_HID_GREENASIA=m
-CONFIG_GREENASIA_FF=y
-CONFIG_HID_SMARTJOYPLUS=m
-CONFIG_SMARTJOYPLUS_FF=y
-CONFIG_HID_TOPSEED=m
-CONFIG_HID_THRUSTMASTER=m
-CONFIG_THRUSTMASTER_FF=y
-CONFIG_HID_ZEROPLUS=m
-CONFIG_ZEROPLUS_FF=y
-CONFIG_USB_HID=m
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
@@ -251,13 +225,8 @@ CONFIG_USB_DYNAMIC_MINORS=y
 CONFIG_USB_MON=m
 CONFIG_USB_WUSB_CBAF=m
 CONFIG_USB_XHCI_HCD=m
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_R8A66597_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_WDM=m
-CONFIG_USB_TMC=m
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y

arch/parisc/include/asm/serial.h

@@ -6,5 +6,3 @@
  * This is used for 16550-compatible UARTs
  */
 #define BASE_BAUD ( 1843200 / 16 )
-
-#define SERIAL_PORT_DFNS

arch/parisc/kernel/hardware.c

@@ -36,6 +36,9 @@
  *	HP PARISC Hardware Database
  *	Access to this database is only possible during bootup
  *	so don't reference this table after starting the init process
+ *
+ *	NOTE: Product names which are listed here and ends with a '?'
+ *	are guessed. If you know the correct name, please let us know.
  */
  
 static struct hp_hardware hp_hardware_list[] = {
@@ -222,7 +225,7 @@ static struct hp_hardware hp_hardware_list[] = {
 	{HPHW_NPROC,0x5DD,0x4,0x81,"Duet W2"},
 	{HPHW_NPROC,0x5DE,0x4,0x81,"Piccolo W+"},
 	{HPHW_NPROC,0x5DF,0x4,0x81,"Cantata W2"},
-	{HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+? (rp5470)"},
+	{HPHW_NPROC,0x5DF,0x0,0x00,"Marcato W+ (rp5470)?"},
 	{HPHW_NPROC,0x5E0,0x4,0x91,"Cantata DC- W2"},
 	{HPHW_NPROC,0x5E1,0x4,0x91,"Crescendo DC- W2"},
 	{HPHW_NPROC,0x5E2,0x4,0x91,"Crescendo 650 W2"},
@@ -276,9 +279,11 @@ static struct hp_hardware hp_hardware_list[] = {
 	{HPHW_NPROC,0x888,0x4,0x91,"Storm Peak Fast DC-"},
 	{HPHW_NPROC,0x889,0x4,0x91,"Storm Peak Fast"},
 	{HPHW_NPROC,0x88A,0x4,0x91,"Crestone Peak Slow"},
+	{HPHW_NPROC,0x88B,0x4,0x91,"Crestone Peak Fast?"},
 	{HPHW_NPROC,0x88C,0x4,0x91,"Orca Mako+"},
 	{HPHW_NPROC,0x88D,0x4,0x91,"Rainier/Medel Mako+ Slow"},
 	{HPHW_NPROC,0x88E,0x4,0x91,"Rainier/Medel Mako+ Fast"},
+	{HPHW_NPROC,0x892,0x4,0x91,"Mt. Hamilton Slow Mako+?"},
 	{HPHW_NPROC,0x894,0x4,0x91,"Mt. Hamilton Fast Mako+"},
 	{HPHW_NPROC,0x895,0x4,0x91,"Storm Peak Slow Mako+"},
 	{HPHW_NPROC,0x896,0x4,0x91,"Storm Peak Fast Mako+"},

arch/parisc/kernel/head.S

@@ -41,9 +41,7 @@ END(boot_args)
         .import fault_vector_11,code    /* IVA parisc 1.1 32 bit */
 	.import	$global$		/* forward declaration */
 #endif /*!CONFIG_64BIT*/
-	.export _stext,data		/* Kernel want it this way! */
-_stext:
-ENTRY(stext)
+ENTRY(parisc_kernel_start)
 	.proc
 	.callinfo
 
@@ -347,7 +345,7 @@ smp_slave_stext:
 	.procend
 #endif /* CONFIG_SMP */
 
-ENDPROC(stext)
+ENDPROC(parisc_kernel_start)
 
 #ifndef CONFIG_64BIT
 	.section .data..read_mostly

arch/parisc/kernel/sys_parisc.c

@@ -61,8 +61,15 @@ static int get_offset(struct address_space *mapping)
 	return (unsigned long) mapping >> 8;
 }
 
-static unsigned long get_shared_area(struct address_space *mapping,
-		unsigned long addr, unsigned long len, unsigned long pgoff)
+static unsigned long shared_align_offset(struct file *filp, unsigned long pgoff)
+{
+	struct address_space *mapping = filp ? filp->f_mapping : NULL;
+
+	return (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+}
+
+static unsigned long get_shared_area(struct file *filp, unsigned long addr,
+		unsigned long len, unsigned long pgoff)
 {
 	struct vm_unmapped_area_info info;
 
@@ -71,7 +78,7 @@ static unsigned long get_shared_area(struct address_space *mapping,
 	info.low_limit = PAGE_ALIGN(addr);
 	info.high_limit = TASK_SIZE;
 	info.align_mask = PAGE_MASK & (SHMLBA - 1);
-	info.align_offset = (get_offset(mapping) + pgoff) << PAGE_SHIFT;
+	info.align_offset = shared_align_offset(filp, pgoff);
 	return vm_unmapped_area(&info);
 }
 
@@ -82,20 +89,18 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr,
 		return -ENOMEM;
 	if (flags & MAP_FIXED) {
 		if ((flags & MAP_SHARED) &&
-		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
+		    (addr - shared_align_offset(filp, pgoff)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
 	}
 	if (!addr)
 		addr = TASK_UNMAPPED_BASE;
 
-	if (filp) {
-		addr = get_shared_area(filp->f_mapping, addr, len, pgoff);
-	} else if(flags & MAP_SHARED) {
-		addr = get_shared_area(NULL, addr, len, pgoff);
-	} else {
+	if (filp || (flags & MAP_SHARED))
+		addr = get_shared_area(filp, addr, len, pgoff);
+	else
 		addr = get_unshared_area(addr, len);
-	}
+
 	return addr;
 }
 

arch/parisc/kernel/unwind.c

@@ -168,7 +168,7 @@ void unwind_table_remove(struct unwind_table *table)
 }
 
 /* Called from setup_arch to import the kernel unwind info */
-int unwind_init(void)
+int __init unwind_init(void)
 {
 	long start, stop;
 	register unsigned long gp __asm__ ("r27");
@@ -233,7 +233,6 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
 	e = find_unwind_entry(info->ip);
 	if (e == NULL) {
 		unsigned long sp;
-		extern char _stext[], _etext[];
 
 		dbg("Cannot find unwind entry for 0x%lx; forced unwinding\n", info->ip);
 
@@ -281,8 +280,7 @@ static void unwind_frame_regs(struct unwind_frame_info *info)
 				break;
 			info->prev_ip = tmp;
 			sp = info->prev_sp;
-		} while (info->prev_ip < (unsigned long)_stext ||
-			 info->prev_ip > (unsigned long)_etext);
+		} while (!kernel_text_address(info->prev_ip));
 
 		info->rp = 0;
 
@@ -435,9 +433,8 @@ unsigned long return_address(unsigned int level)
 	do {
 		if (unwind_once(&info) < 0 || info.ip == 0)
 			return 0;
-		if (!__kernel_text_address(info.ip)) {
+		if (!kernel_text_address(info.ip))
 			return 0;
-		}
 	} while (info.ip && level--);
 
 	return info.ip;

arch/parisc/kernel/vmlinux.lds.S

@@ -6,24 +6,19 @@
  *    Copyright (C) 2000 Michael Ang <mang with subcarrier.org>
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *    Copyright (C) 2003 James Bottomley <jejb with parisc-linux.org>
- *    Copyright (C) 2006 Helge Deller <deller@gmx.de>
- *
- *
- *    This program is free software; you can redistribute it and/or modify
- *    it under the terms of the GNU General Public License as published by
- *    the Free Software Foundation; either version 2 of the License, or
- *    (at your option) any later version.
- *
- *    This program is distributed in the hope that it will be useful,
- *    but WITHOUT ANY WARRANTY; without even the implied warranty of
- *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *    GNU General Public License for more details.
- *
- *    You should have received a copy of the GNU General Public License
- *    along with this program; if not, write to the Free Software
- *    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *    Copyright (C) 2006-2013 Helge Deller <deller@gmx.de>
+ */
+
+/*
+ * Put page table entries (swapper_pg_dir) as the first thing in .bss. This
+ * will ensure that it has .bss alignment (PAGE_SIZE).
  */
+#define BSS_FIRST_SECTIONS	*(.data..vm0.pmd) \
+				*(.data..vm0.pgd) \
+				*(.data..vm0.pte)
+
 #include <asm-generic/vmlinux.lds.h>
+
 /* needed for the processor specific cache alignment size */	
 #include <asm/cache.h>
 #include <asm/page.h>
@@ -39,7 +34,7 @@ OUTPUT_FORMAT("elf64-hppa-linux")
 OUTPUT_ARCH(hppa:hppa2.0w)
 #endif
 
-ENTRY(_stext)
+ENTRY(parisc_kernel_start)
 #ifndef CONFIG_64BIT
 jiffies = jiffies_64 + 4;
 #else
@@ -49,11 +44,29 @@ SECTIONS
 {
 	. = KERNEL_BINARY_TEXT_START;
 
+	__init_begin = .;
+	HEAD_TEXT_SECTION
+	INIT_TEXT_SECTION(8)
+
+	. = ALIGN(PAGE_SIZE);
+	INIT_DATA_SECTION(PAGE_SIZE)
+	/* we have to discard exit text and such at runtime, not link time */
+	.exit.text :
+	{
+		EXIT_TEXT
+	}
+	.exit.data :
+	{
+		EXIT_DATA
+	}
+	PERCPU_SECTION(8)
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+	/* freed after init ends here */
+
 	_text = .;		/* Text and read-only data */
-	.head ALIGN(16) : {
-		HEAD_TEXT
-	} = 0
-	.text ALIGN(16) : {
+	_stext = .;
+	.text ALIGN(PAGE_SIZE) : {
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
@@ -68,21 +81,28 @@ SECTIONS
 		*(.lock.text)		/* out-of-line lock text */
 		*(.gnu.warning)
 	}
-	/* End of text section */
+	. = ALIGN(PAGE_SIZE);
 	_etext = .;
+	/* End of text section */
 
 	/* Start of data section */
 	_sdata = .;
 
-	RODATA
+	RO_DATA_SECTION(8)
 
-	/* writeable */
-	/* Make sure this is page aligned so
-	 * that we can properly leave these
-	 * as writable
-	 */
-	. = ALIGN(PAGE_SIZE);
-	data_start = .;
+#ifdef CONFIG_64BIT
+	. = ALIGN(16);
+	/* Linkage tables */
+	.opd : {
+		*(.opd)
+	} PROVIDE (__gp = .);
+	.plt : {
+		*(.plt)
+	}
+	.dlt : {
+		*(.dlt)
+	}
+#endif
 
 	/* unwind info */
 	.PARISC.unwind : {
@@ -91,7 +111,15 @@ SECTIONS
 		__stop___unwind = .;
 	}
 
-	EXCEPTION_TABLE(16)
+	/* writeable */
+	/* Make sure this is page aligned so
+	 * that we can properly leave these
+	 * as writable
+	 */
+	. = ALIGN(PAGE_SIZE);
+	data_start = .;
+
+	EXCEPTION_TABLE(8)
 	NOTES
 
 	/* Data */
@@ -107,54 +135,8 @@ SECTIONS
 	_edata = .;
 
 	/* BSS */
-	__bss_start = .;
-	/* page table entries need to be PAGE_SIZE aligned */
-	. = ALIGN(PAGE_SIZE);
-	.data..vmpages : {
-		*(.data..vm0.pmd)
-		*(.data..vm0.pgd)
-		*(.data..vm0.pte)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
-
-#ifdef CONFIG_64BIT
-	. = ALIGN(16);
-	/* Linkage tables */
-	.opd : {
-		*(.opd)
-	} PROVIDE (__gp = .); 
-	.plt : {
-		*(.plt)
-	} 
-	.dlt : {
-		*(.dlt)
-	}
-#endif
+	BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 8)
 
-	/* reserve space for interrupt stack by aligning __init* to 16k */
-	. = ALIGN(16384);
-	__init_begin = .;
-	INIT_TEXT_SECTION(16384)
-	. = ALIGN(PAGE_SIZE);
-	INIT_DATA_SECTION(16)
-	/* we have to discard exit text and such at runtime, not link time */
-	.exit.text :
-	{
-		EXIT_TEXT
-	}
-	.exit.data :
-	{
-		EXIT_DATA
-	}
-
-	PERCPU_SECTION(L1_CACHE_BYTES)
-	. = ALIGN(PAGE_SIZE);
-	__init_end = .;
-	/* freed after init ends here */
 	_end = . ;
 
 	STABS_DEBUG

arch/parisc/mm/init.c

@@ -32,6 +32,7 @@
 #include <asm/sections.h>
 
 extern int  data_start;
+extern void parisc_kernel_start(void);	/* Kernel entry point in head.S */
 
 #if PT_NLEVELS == 3
 /* NOTE: This layout exactly conforms to the hybrid L2/L3 page table layout
@@ -324,8 +325,9 @@ static void __init setup_bootmem(void)
 	reserve_bootmem_node(NODE_DATA(0), 0UL,
 			(unsigned long)(PAGE0->mem_free +
 				PDC_CONSOLE_IO_IODC_SIZE), BOOTMEM_DEFAULT);
-	reserve_bootmem_node(NODE_DATA(0), __pa((unsigned long)_text),
-			(unsigned long)(_end - _text), BOOTMEM_DEFAULT);
+	reserve_bootmem_node(NODE_DATA(0), __pa(KERNEL_BINARY_TEXT_START),
+			(unsigned long)(_end - KERNEL_BINARY_TEXT_START),
+			BOOTMEM_DEFAULT);
 	reserve_bootmem_node(NODE_DATA(0), (bootmap_start_pfn << PAGE_SHIFT),
 			((bootmap_pfn - bootmap_start_pfn) << PAGE_SHIFT),
 			BOOTMEM_DEFAULT);
@@ -378,6 +380,17 @@ static void __init setup_bootmem(void)
 	request_resource(&sysram_resources[0], &pdcdata_resource);
 }
 
+static int __init parisc_text_address(unsigned long vaddr)
+{
+	static unsigned long head_ptr __initdata;
+
+	if (!head_ptr)
+		head_ptr = PAGE_MASK & (unsigned long)
+			dereference_function_descriptor(&parisc_kernel_start);
+
+	return core_kernel_text(vaddr) || vaddr == head_ptr;
+}
+
 static void __init map_pages(unsigned long start_vaddr,
 			     unsigned long start_paddr, unsigned long size,
 			     pgprot_t pgprot, int force)
@@ -466,7 +479,7 @@ static void __init map_pages(unsigned long start_vaddr,
 				 */
 				if (force)
 					pte =  __mk_pte(address, pgprot);
-				else if (core_kernel_text(vaddr) &&
+				else if (parisc_text_address(vaddr) &&
 					 address != fv_addr)
 					pte = __mk_pte(address, PAGE_KERNEL_EXEC);
 				else

arch/s390/crypto/aes_s390.c

@@ -55,8 +55,7 @@ struct pcc_param {
 
 struct s390_xts_ctx {
 	u8 key[32];
-	u8 xts_param[16];
-	struct pcc_param pcc;
+	u8 pcc_key[32];
 	long enc;
 	long dec;
 	int key_len;
@@ -591,7 +590,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 		xts_ctx->enc = KM_XTS_128_ENCRYPT;
 		xts_ctx->dec = KM_XTS_128_DECRYPT;
 		memcpy(xts_ctx->key + 16, in_key, 16);
-		memcpy(xts_ctx->pcc.key + 16, in_key + 16, 16);
+		memcpy(xts_ctx->pcc_key + 16, in_key + 16, 16);
 		break;
 	case 48:
 		xts_ctx->enc = 0;
@@ -602,7 +601,7 @@ static int xts_aes_set_key(struct crypto_tfm *tfm, const u8 *in_key,
 		xts_ctx->enc = KM_XTS_256_ENCRYPT;
 		xts_ctx->dec = KM_XTS_256_DECRYPT;
 		memcpy(xts_ctx->key, in_key, 32);
-		memcpy(xts_ctx->pcc.key, in_key + 32, 32);
+		memcpy(xts_ctx->pcc_key, in_key + 32, 32);
 		break;
 	default:
 		*flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
@@ -621,29 +620,33 @@ static int xts_aes_crypt(struct blkcipher_desc *desc, long func,
 	unsigned int nbytes = walk->nbytes;
 	unsigned int n;
 	u8 *in, *out;
-	void *param;
+	struct pcc_param pcc_param;
+	struct {
+		u8 key[32];
+		u8 init[16];
+	} xts_param;
 
 	if (!nbytes)
 		goto out;
 
-	memset(xts_ctx->pcc.block, 0, sizeof(xts_ctx->pcc.block));
-	memset(xts_ctx->pcc.bit, 0, sizeof(xts_ctx->pcc.bit));
-	memset(xts_ctx->pcc.xts, 0, sizeof(xts_ctx->pcc.xts));
-	memcpy(xts_ctx->pcc.tweak, walk->iv, sizeof(xts_ctx->pcc.tweak));
-	param = xts_ctx->pcc.key + offset;
-	ret = crypt_s390_pcc(func, param);
+	memset(pcc_param.block, 0, sizeof(pcc_param.block));
+	memset(pcc_param.bit, 0, sizeof(pcc_param.bit));
+	memset(pcc_param.xts, 0, sizeof(pcc_param.xts));
+	memcpy(pcc_param.tweak, walk->iv, sizeof(pcc_param.tweak));
+	memcpy(pcc_param.key, xts_ctx->pcc_key, 32);
+	ret = crypt_s390_pcc(func, &pcc_param.key[offset]);
 	if (ret < 0)
 		return -EIO;
 
-	memcpy(xts_ctx->xts_param, xts_ctx->pcc.xts, 16);
-	param = xts_ctx->key + offset;
+	memcpy(xts_param.key, xts_ctx->key, 32);
+	memcpy(xts_param.init, pcc_param.xts, 16);
 	do {
 		/* only use complete blocks */
 		n = nbytes & ~(AES_BLOCK_SIZE - 1);
 		out = walk->dst.virt.addr;
 		in = walk->src.virt.addr;
 
-		ret = crypt_s390_km(func, param, out, in, n);
+		ret = crypt_s390_km(func, &xts_param.key[offset], out, in, n);
 		if (ret < 0 || ret != n)
 			return -EIO;
 

arch/um/Makefile

@@ -33,12 +33,11 @@ MODE_INCLUDE	+= -I$(srctree)/$(ARCH_DIR)/include/shared/skas
 
 HEADER_ARCH 	:= $(SUBARCH)
 
-# Additional ARCH settings for x86
-ifeq ($(SUBARCH),i386)
-        HEADER_ARCH := x86
+ifneq ($(filter $(SUBARCH),x86 x86_64 i386),)
+	HEADER_ARCH := x86
 endif
-ifeq ($(SUBARCH),x86_64)
-        HEADER_ARCH := x86
+
+ifdef CONFIG_64BIT
 	KBUILD_CFLAGS += -mcmodel=large
 endif
 

arch/um/kernel/sysrq.c

@@ -19,7 +19,7 @@ struct stack_frame {
 	unsigned long return_address;
 };
 
-static void print_stack_trace(unsigned long *sp, unsigned long bp)
+static void do_stack_trace(unsigned long *sp, unsigned long bp)
 {
 	int reliable;
 	unsigned long addr;
@@ -94,5 +94,5 @@ void show_stack(struct task_struct *task, unsigned long *stack)
 	}
 	printk(KERN_CONT "\n");
 
-	print_stack_trace(sp, bp);
+	do_stack_trace(sp, bp);
 }

arch/x86/Makefile

@@ -31,6 +31,9 @@ ifeq ($(CONFIG_X86_32),y)
 
         KBUILD_CFLAGS += -msoft-float -mregparm=3 -freg-struct-return
 
+        # Don't autogenerate SSE instructions
+	KBUILD_CFLAGS += -mno-sse
+
         # Never want PIC in a 32-bit kernel, prevent breakage with GCC built
         # with nonstandard options
         KBUILD_CFLAGS += -fno-pic
@@ -57,8 +60,11 @@ else
         KBUILD_AFLAGS += -m64
         KBUILD_CFLAGS += -m64
 
+        # Don't autogenerate SSE instructions
+	KBUILD_CFLAGS += -mno-sse
+
 	# Use -mpreferred-stack-boundary=3 if supported.
-	KBUILD_CFLAGS += $(call cc-option,-mno-sse -mpreferred-stack-boundary=3)
+	KBUILD_CFLAGS += $(call cc-option,-mpreferred-stack-boundary=3)
 
         # FIXME - should be integrated in Makefile.cpu (Makefile_32.cpu)
         cflags-$(CONFIG_MK8) += $(call cc-option,-march=k8)

arch/x86/include/asm/atomic.h

@@ -77,7 +77,7 @@ static inline void atomic_sub(int i, atomic_t *v)
  */
 static inline int atomic_sub_and_test(int i, atomic_t *v)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, i, "%0", "e");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "subl", v->counter, "er", i, "%0", "e");
 }
 
 /**
@@ -141,7 +141,7 @@ static inline int atomic_inc_and_test(atomic_t *v)
  */
 static inline int atomic_add_negative(int i, atomic_t *v)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, i, "%0", "s");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "addl", v->counter, "er", i, "%0", "s");
 }
 
 /**

arch/x86/include/asm/atomic64_64.h

@@ -72,7 +72,7 @@ static inline void atomic64_sub(long i, atomic64_t *v)
  */
 static inline int atomic64_sub_and_test(long i, atomic64_t *v)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, i, "%0", "e");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "subq", v->counter, "er", i, "%0", "e");
 }
 
 /**
@@ -138,7 +138,7 @@ static inline int atomic64_inc_and_test(atomic64_t *v)
  */
 static inline int atomic64_add_negative(long i, atomic64_t *v)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, i, "%0", "s");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "addq", v->counter, "er", i, "%0", "s");
 }
 
 /**

arch/x86/include/asm/bitops.h

@@ -205,7 +205,7 @@ static inline void change_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_set_bit(long nr, volatile unsigned long *addr)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, nr, "%0", "c");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "bts", *addr, "Ir", nr, "%0", "c");
 }
 
 /**
@@ -251,7 +251,7 @@ static inline int __test_and_set_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_clear_bit(long nr, volatile unsigned long *addr)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, nr, "%0", "c");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "btr", *addr, "Ir", nr, "%0", "c");
 }
 
 /**
@@ -304,7 +304,7 @@ static inline int __test_and_change_bit(long nr, volatile unsigned long *addr)
  */
 static inline int test_and_change_bit(long nr, volatile unsigned long *addr)
 {
-	GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, nr, "%0", "c");
+	GEN_BINARY_RMWcc(LOCK_PREFIX "btc", *addr, "Ir", nr, "%0", "c");
 }
 
 static __always_inline int constant_test_bit(long nr, const volatile unsigned long *addr)

arch/x86/include/asm/local.h

@@ -52,7 +52,7 @@ static inline void local_sub(long i, local_t *l)
  */
 static inline int local_sub_and_test(long i, local_t *l)
 {
-	GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, i, "%0", "e");
+	GEN_BINARY_RMWcc(_ASM_SUB, l->a.counter, "er", i, "%0", "e");
 }
 
 /**
@@ -92,7 +92,7 @@ static inline int local_inc_and_test(local_t *l)
  */
 static inline int local_add_negative(long i, local_t *l)
 {
-	GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, i, "%0", "s");
+	GEN_BINARY_RMWcc(_ASM_ADD, l->a.counter, "er", i, "%0", "s");
 }
 
 /**

arch/x86/include/asm/rmwcc.h

@@ -16,8 +16,8 @@ cc_label:								\
 #define GEN_UNARY_RMWcc(op, var, arg0, cc) 				\
 	__GEN_RMWcc(op " " arg0, var, cc)
 
-#define GEN_BINARY_RMWcc(op, var, val, arg0, cc)			\
-	__GEN_RMWcc(op " %1, " arg0, var, cc, "er" (val))
+#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc)			\
+	__GEN_RMWcc(op " %1, " arg0, var, cc, vcon (val))
 
 #else /* !CC_HAVE_ASM_GOTO */
 
@@ -33,8 +33,8 @@ do {									\
 #define GEN_UNARY_RMWcc(op, var, arg0, cc)				\
 	__GEN_RMWcc(op " " arg0, var, cc)
 
-#define GEN_BINARY_RMWcc(op, var, val, arg0, cc)			\
-	__GEN_RMWcc(op " %2, " arg0, var, cc, "er" (val))
+#define GEN_BINARY_RMWcc(op, var, vcon, val, arg0, cc)			\
+	__GEN_RMWcc(op " %2, " arg0, var, cc, vcon (val))
 
 #endif /* CC_HAVE_ASM_GOTO */
 

arch/x86/include/asm/trace/irq_vectors.h

@@ -71,6 +71,17 @@ DEFINE_IRQ_VECTOR_EVENT(x86_platform_ipi);
  */
 DEFINE_IRQ_VECTOR_EVENT(irq_work);
 
+/*
+ * We must dis-allow sampling irq_work_exit() because perf event sampling
+ * itself can cause irq_work, which would lead to an infinite loop;
+ *
+ *  1) irq_work_exit happens
+ *  2) generates perf sample
+ *  3) generates irq_work
+ *  4) goto 1
+ */
+TRACE_EVENT_PERF_PERM(irq_work_exit, is_sampling_event(p_event) ? -EPERM : 0);
+
 /*
  * call_function - called when entering/exiting a call function interrupt
  * vector handler

arch/x86/kernel/reboot.c

@@ -558,6 +558,17 @@ void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
 #ifdef CONFIG_X86_IO_APIC
+	/*
+	 * Disabling IO APIC before local APIC is a workaround for
+	 * erratum AVR31 in "Intel Atom Processor C2000 Product Family
+	 * Specification Update". In this situation, interrupts that target
+	 * a Logical Processor whose Local APIC is either in the process of
+	 * being hardware disabled or software disabled are neither delivered
+	 * nor discarded. When this erratum occurs, the processor may hang.
+	 *
+	 * Even without the erratum, it still makes sense to quiet IO APIC
+	 * before disabling Local APIC.
+	 */
 	disable_IO_APIC();
 #endif
 

arch/x86/platform/efi/early_printk.c

@@ -142,7 +142,7 @@ early_efi_write(struct console *con, const char *str, unsigned int num)
 			efi_y += font->height;
 		}
 
-		if (efi_y + font->height >= si->lfb_height) {
+		if (efi_y + font->height > si->lfb_height) {
 			u32 i;
 
 			efi_y -= font->height;

block/blk-cgroup.h

@@ -435,9 +435,9 @@ static inline uint64_t blkg_stat_read(struct blkg_stat *stat)
 	uint64_t v;
 
 	do {
-		start = u64_stats_fetch_begin(&stat->syncp);
+		start = u64_stats_fetch_begin_bh(&stat->syncp);
 		v = stat->cnt;
-	} while (u64_stats_fetch_retry(&stat->syncp, start));
+	} while (u64_stats_fetch_retry_bh(&stat->syncp, start));
 
 	return v;
 }
@@ -508,9 +508,9 @@ static inline struct blkg_rwstat blkg_rwstat_read(struct blkg_rwstat *rwstat)
 	struct blkg_rwstat tmp;
 
 	do {
-		start = u64_stats_fetch_begin(&rwstat->syncp);
+		start = u64_stats_fetch_begin_bh(&rwstat->syncp);
 		tmp = *rwstat;
-	} while (u64_stats_fetch_retry(&rwstat->syncp, start));
+	} while (u64_stats_fetch_retry_bh(&rwstat->syncp, start));
 
 	return tmp;
 }

block/blk-flush.c

@@ -502,15 +502,6 @@ void blk_abort_flushes(struct request_queue *q)
 	}
 }
 
-static void bio_end_flush(struct bio *bio, int err)
-{
-	if (err)
-		clear_bit(BIO_UPTODATE, &bio->bi_flags);
-	if (bio->bi_private)
-		complete(bio->bi_private);
-	bio_put(bio);
-}
-
 /**
  * blkdev_issue_flush - queue a flush
  * @bdev:	blockdev to issue flush for
@@ -526,7 +517,6 @@ static void bio_end_flush(struct bio *bio, int err)
 int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 		sector_t *error_sector)
 {
-	DECLARE_COMPLETION_ONSTACK(wait);
 	struct request_queue *q;
 	struct bio *bio;
 	int ret = 0;
@@ -548,13 +538,9 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 		return -ENXIO;
 
 	bio = bio_alloc(gfp_mask, 0);
-	bio->bi_end_io = bio_end_flush;
 	bio->bi_bdev = bdev;
-	bio->bi_private = &wait;
 
-	bio_get(bio);
-	submit_bio(WRITE_FLUSH, bio);
-	wait_for_completion_io(&wait);
+	ret = submit_bio_wait(WRITE_FLUSH, bio);
 
 	/*
 	 * The driver must store the error location in ->bi_sector, if
@@ -564,9 +550,6 @@ int blkdev_issue_flush(struct block_device *bdev, gfp_t gfp_mask,
 	if (error_sector)
 		*error_sector = bio->bi_sector;
 
-	if (!bio_flagged(bio, BIO_UPTODATE))
-		ret = -EIO;
-
 	bio_put(bio);
 	return ret;
 }

block/blk-mq.c

@@ -202,10 +202,12 @@ static struct request *blk_mq_alloc_request_pinned(struct request_queue *q,
 		if (rq) {
 			blk_mq_rq_ctx_init(q, ctx, rq, rw);
 			break;
-		} else if (!(gfp & __GFP_WAIT))
-			break;
+		}
 
 		blk_mq_put_ctx(ctx);
+		if (!(gfp & __GFP_WAIT))
+			break;
+
 		__blk_mq_run_hw_queue(hctx);
 		blk_mq_wait_for_tags(hctx->tags);
 	} while (1);
@@ -222,7 +224,8 @@ struct request *blk_mq_alloc_request(struct request_queue *q, int rw,
 		return NULL;
 
 	rq = blk_mq_alloc_request_pinned(q, rw, gfp, reserved);
-	blk_mq_put_ctx(rq->mq_ctx);
+	if (rq)
+		blk_mq_put_ctx(rq->mq_ctx);
 	return rq;
 }
 
@@ -235,7 +238,8 @@ struct request *blk_mq_alloc_reserved_request(struct request_queue *q, int rw,
 		return NULL;
 
 	rq = blk_mq_alloc_request_pinned(q, rw, gfp, true);
-	blk_mq_put_ctx(rq->mq_ctx);
+	if (rq)
+		blk_mq_put_ctx(rq->mq_ctx);
 	return rq;
 }
 EXPORT_SYMBOL(blk_mq_alloc_reserved_request);
@@ -308,12 +312,12 @@ void blk_mq_complete_request(struct request *rq, int error)
 
 	blk_account_io_completion(rq, bytes);
 
+	blk_account_io_done(rq);
+
 	if (rq->end_io)
 		rq->end_io(rq, error);
 	else
 		blk_mq_free_request(rq);
-
-	blk_account_io_done(rq);
 }
 
 void __blk_mq_end_io(struct request *rq, int error)

crypto/algif_hash.c

@@ -114,6 +114,9 @@ static ssize_t hash_sendpage(struct socket *sock, struct page *page,
 	struct hash_ctx *ctx = ask->private;
 	int err;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	sg_init_table(ctx->sgl.sg, 1);
 	sg_set_page(ctx->sgl.sg, page, size, offset);

crypto/algif_skcipher.c

@@ -378,6 +378,9 @@ static ssize_t skcipher_sendpage(struct socket *sock, struct page *page,
 	struct skcipher_sg_list *sgl;
 	int err = -EINVAL;
 
+	if (flags & MSG_SENDPAGE_NOTLAST)
+		flags |= MSG_MORE;
+
 	lock_sock(sk);
 	if (!ctx->more && ctx->used)
 		goto unlock;

crypto/authenc.c

@@ -380,9 +380,10 @@ static void crypto_authenc_encrypt_done(struct crypto_async_request *req,
 	if (!err) {
 		struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 		struct crypto_authenc_ctx *ctx = crypto_aead_ctx(authenc);
-		struct ablkcipher_request *abreq = aead_request_ctx(areq);
-		u8 *iv = (u8 *)(abreq + 1) +
-			 crypto_ablkcipher_reqsize(ctx->enc);
+		struct authenc_request_ctx *areq_ctx = aead_request_ctx(areq);
+		struct ablkcipher_request *abreq = (void *)(areq_ctx->tail
+							    + ctx->reqoff);
+		u8 *iv = (u8 *)abreq - crypto_ablkcipher_ivsize(ctx->enc);
 
 		err = crypto_authenc_genicv(areq, iv, 0);
 	}

crypto/ccm.c

@@ -271,7 +271,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain,
 	}
 
 	/* compute plaintext into mac */
-	get_data_to_compute(cipher, pctx, plain, cryptlen);
+	if (cryptlen)
+		get_data_to_compute(cipher, pctx, plain, cryptlen);
 
 out:
 	return err;

crypto/tcrypt.c

@@ -1242,6 +1242,10 @@ static int do_test(int m)
 		ret += tcrypt_test("cmac(des3_ede)");
 		break;
 
+	case 155:
+		ret += tcrypt_test("authenc(hmac(sha1),cbc(aes))");
+		break;
+
 	case 200:
 		test_cipher_speed("ecb(aes)", ENCRYPT, sec, NULL, 0,
 				speed_template_16_24_32);

crypto/testmgr.c

@@ -503,16 +503,16 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
 				goto out;
 			}
 
-			sg_init_one(&sg[0], input,
-				    template[i].ilen + (enc ? authsize : 0));
-
 			if (diff_dst) {
 				output = xoutbuf[0];
 				output += align_offset;
+				sg_init_one(&sg[0], input, template[i].ilen);
 				sg_init_one(&sgout[0], output,
+					    template[i].rlen);
+			} else {
+				sg_init_one(&sg[0], input,
 					    template[i].ilen +
 						(enc ? authsize : 0));
-			} else {
 				output = input;
 			}
 
@@ -612,12 +612,6 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
 				memcpy(q, template[i].input + temp,
 				       template[i].tap[k]);
 
-				n = template[i].tap[k];
-				if (k == template[i].np - 1 && enc)
-					n += authsize;
-				if (offset_in_page(q) + n < PAGE_SIZE)
-					q[n] = 0;
-
 				sg_set_buf(&sg[k], q, template[i].tap[k]);
 
 				if (diff_dst) {
@@ -625,13 +619,17 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
 					    offset_in_page(IDX[k]);
 
 					memset(q, 0, template[i].tap[k]);
-					if (offset_in_page(q) + n < PAGE_SIZE)
-						q[n] = 0;
 
 					sg_set_buf(&sgout[k], q,
 						   template[i].tap[k]);
 				}
 
+				n = template[i].tap[k];
+				if (k == template[i].np - 1 && enc)
+					n += authsize;
+				if (offset_in_page(q) + n < PAGE_SIZE)
+					q[n] = 0;
+
 				temp += template[i].tap[k];
 			}
 
@@ -650,10 +648,10 @@ static int __test_aead(struct crypto_aead *tfm, int enc,
 					goto out;
 				}
 
-				sg[k - 1].length += authsize;
-
 				if (diff_dst)
 					sgout[k - 1].length += authsize;
+				else
+					sg[k - 1].length += authsize;
 			}
 
 			sg_init_table(asg, template[i].anp);

drivers/ata/libata-scsi.c

@@ -3625,6 +3625,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
 		shost->max_lun = 1;
 		shost->max_channel = 1;
 		shost->max_cmd_len = 16;
+		shost->no_write_same = 1;
 
 		/* Schedule policy is determined by ->qc_defer()
 		 * callback and it needs to see every deferred qc.

drivers/base/power/main.c

@@ -29,6 +29,7 @@
 #include <linux/async.h>
 #include <linux/suspend.h>
 #include <trace/events/power.h>
+#include <linux/cpufreq.h>
 #include <linux/cpuidle.h>
 #include <linux/timer.h>
 
@@ -540,6 +541,7 @@ static void dpm_resume_noirq(pm_message_t state)
 	dpm_show_time(starttime, state, "noirq");
 	resume_device_irqs();
 	cpuidle_resume();
+	cpufreq_resume();
 }
 
 /**
@@ -955,6 +957,7 @@ static int dpm_suspend_noirq(pm_message_t state)
 	ktime_t starttime = ktime_get();
 	int error = 0;
 
+	cpufreq_suspend();
 	cpuidle_pause();
 	suspend_device_irqs();
 	mutex_lock(&dpm_list_mtx);

drivers/block/xen-blkfront.c

@@ -489,7 +489,7 @@ static int blkif_queue_request(struct request *req)
 
 			if ((ring_req->operation == BLKIF_OP_INDIRECT) &&
 			    (i % SEGS_PER_INDIRECT_FRAME == 0)) {
-				unsigned long pfn;
+				unsigned long uninitialized_var(pfn);
 
 				if (segments)
 					kunmap_atomic(segments);
@@ -2011,6 +2011,10 @@ static void blkif_release(struct gendisk *disk, fmode_t mode)
 
 	bdev = bdget_disk(disk, 0);
 
+	if (!bdev) {
+		WARN(1, "Block device %s yanked out from us!\n", disk->disk_name);
+		goto out_mutex;
+	}
 	if (bdev->bd_openers)
 		goto out;
 
@@ -2041,6 +2045,7 @@ static void blkif_release(struct gendisk *disk, fmode_t mode)
 
 out:
 	bdput(bdev);
+out_mutex:
 	mutex_unlock(&blkfront_mutex);
 }
 

drivers/clocksource/Kconfig

@@ -87,6 +87,7 @@ config ARM_ARCH_TIMER
 config ARM_ARCH_TIMER_EVTSTREAM
 	bool "Support for ARM architected timer event stream generation"
 	default y if ARM_ARCH_TIMER
+	depends on ARM_ARCH_TIMER
 	help
 	  This option enables support for event stream generation based on
 	  the ARM architected timer. It is used for waking up CPUs executing

drivers/clocksource/sh_mtu2.c

@@ -313,8 +313,20 @@ static int sh_mtu2_setup(struct sh_mtu2_priv *p, struct platform_device *pdev)
 		goto err1;
 	}
 
-	return sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
-				cfg->clockevent_rating);
+	ret = clk_prepare(p->clk);
+	if (ret < 0)
+		goto err2;
+
+	ret = sh_mtu2_register(p, (char *)dev_name(&p->pdev->dev),
+			       cfg->clockevent_rating);
+	if (ret < 0)
+		goto err3;
+
+	return 0;
+ err3:
+	clk_unprepare(p->clk);
+ err2:
+	clk_put(p->clk);
  err1:
 	iounmap(p->mapbase);
  err0:

drivers/clocksource/sh_tmu.c

@@ -472,12 +472,26 @@ static int sh_tmu_setup(struct sh_tmu_priv *p, struct platform_device *pdev)
 		ret = PTR_ERR(p->clk);
 		goto err1;
 	}
+
+	ret = clk_prepare(p->clk);
+	if (ret < 0)
+		goto err2;
+
 	p->cs_enabled = false;
 	p->enable_count = 0;
 
-	return sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
-			       cfg->clockevent_rating,
-			       cfg->clocksource_rating);
+	ret = sh_tmu_register(p, (char *)dev_name(&p->pdev->dev),
+			      cfg->clockevent_rating,
+			      cfg->clocksource_rating);
+	if (ret < 0)
+		goto err3;
+
+	return 0;
+
+ err3:
+	clk_unprepare(p->clk);
+ err2:
+	clk_put(p->clk);
  err1:
 	iounmap(p->mapbase);
  err0:

drivers/cpufreq/cpufreq.c

@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
+#include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/tick.h>
 #include <trace/events/power.h>
@@ -47,6 +48,9 @@ static LIST_HEAD(cpufreq_policy_list);
 static DEFINE_PER_CPU(char[CPUFREQ_NAME_LEN], cpufreq_cpu_governor);
 #endif
 
+/* Flag to suspend/resume CPUFreq governors */
+static bool cpufreq_suspended;
+
 static inline bool has_target(void)
 {
 	return cpufreq_driver->target_index || cpufreq_driver->target;
@@ -1462,6 +1466,41 @@ static struct subsys_interface cpufreq_interface = {
 	.remove_dev	= cpufreq_remove_dev,
 };
 
+void cpufreq_suspend(void)
+{
+	struct cpufreq_policy *policy;
+
+	if (!has_target())
+		return;
+
+	pr_debug("%s: Suspending Governors\n", __func__);
+
+	list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+		if (__cpufreq_governor(policy, CPUFREQ_GOV_STOP))
+			pr_err("%s: Failed to stop governor for policy: %p\n",
+				__func__, policy);
+
+	cpufreq_suspended = true;
+}
+
+void cpufreq_resume(void)
+{
+	struct cpufreq_policy *policy;
+
+	if (!has_target())
+		return;
+
+	pr_debug("%s: Resuming Governors\n", __func__);
+
+	cpufreq_suspended = false;
+
+	list_for_each_entry(policy, &cpufreq_policy_list, policy_list)
+		if (__cpufreq_governor(policy, CPUFREQ_GOV_START)
+		    || __cpufreq_governor(policy, CPUFREQ_GOV_LIMITS))
+			pr_err("%s: Failed to start governor for policy: %p\n",
+				__func__, policy);
+}
+
 /**
  * cpufreq_bp_suspend - Prepare the boot CPU for system suspend.
  *
@@ -1764,6 +1803,10 @@ static int __cpufreq_governor(struct cpufreq_policy *policy,
 	struct cpufreq_governor *gov = NULL;
 #endif
 
+	/* Don't start any governor operations if we are entering suspend */
+	if (cpufreq_suspended)
+		return 0;
+
 	if (policy->governor->max_transition_latency &&
 	    policy->cpuinfo.transition_latency >
 	    policy->governor->max_transition_latency) {
@@ -2076,9 +2119,6 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb,
 	dev = get_cpu_device(cpu);
 	if (dev) {
 
-		if (action & CPU_TASKS_FROZEN)
-			frozen = true;
-
 		switch (action & ~CPU_TASKS_FROZEN) {
 		case CPU_ONLINE:
 			__cpufreq_add_dev(dev, NULL, frozen);

drivers/cpuidle/cpuidle.c

@@ -400,7 +400,7 @@ EXPORT_SYMBOL_GPL(cpuidle_register_device);
  */
 void cpuidle_unregister_device(struct cpuidle_device *dev)
 {
-	if (dev->registered == 0)
+	if (!dev || dev->registered == 0)
 		return;
 
 	cpuidle_pause_and_lock();

drivers/crypto/caam/caamalg.c

@@ -818,7 +818,7 @@ static void aead_decrypt_done(struct device *jrdev, u32 *desc, u32 err,
 		       ivsize, 1);
 	print_hex_dump(KERN_ERR, "dst    @"__stringify(__LINE__)": ",
 		       DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->dst),
-		       req->cryptlen, 1);
+		       req->cryptlen - ctx->authsize, 1);
 #endif
 
 	if (err) {
@@ -972,12 +972,9 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr,
 				 (edesc->src_nents ? : 1);
 		in_options = LDST_SGF;
 	}
-	if (encrypt)
-		append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
-				  req->cryptlen - authsize, in_options);
-	else
-		append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
-				  req->cryptlen, in_options);
+
+	append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
+			  in_options);
 
 	if (likely(req->src == req->dst)) {
 		if (all_contig) {
@@ -998,7 +995,8 @@ static void init_aead_job(u32 *sh_desc, dma_addr_t ptr,
 		}
 	}
 	if (encrypt)
-		append_seq_out_ptr(desc, dst_dma, req->cryptlen, out_options);
+		append_seq_out_ptr(desc, dst_dma, req->cryptlen + authsize,
+				   out_options);
 	else
 		append_seq_out_ptr(desc, dst_dma, req->cryptlen - authsize,
 				   out_options);
@@ -1048,8 +1046,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr,
 		sec4_sg_index += edesc->assoc_nents + 1 + edesc->src_nents;
 		in_options = LDST_SGF;
 	}
-	append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize +
-			  req->cryptlen - authsize, in_options);
+	append_seq_in_ptr(desc, src_dma, req->assoclen + ivsize + req->cryptlen,
+			  in_options);
 
 	if (contig & GIV_DST_CONTIG) {
 		dst_dma = edesc->iv_dma;
@@ -1066,7 +1064,8 @@ static void init_aead_giv_job(u32 *sh_desc, dma_addr_t ptr,
 		}
 	}
 
-	append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen, out_options);
+	append_seq_out_ptr(desc, dst_dma, ivsize + req->cryptlen + authsize,
+			   out_options);
 }
 
 /*
@@ -1130,7 +1129,8 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr,
  * allocate and map the aead extended descriptor
  */
 static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
-					   int desc_bytes, bool *all_contig_ptr)
+					   int desc_bytes, bool *all_contig_ptr,
+					   bool encrypt)
 {
 	struct crypto_aead *aead = crypto_aead_reqtfm(req);
 	struct caam_ctx *ctx = crypto_aead_ctx(aead);
@@ -1145,12 +1145,22 @@ static struct aead_edesc *aead_edesc_alloc(struct aead_request *req,
 	bool assoc_chained = false, src_chained = false, dst_chained = false;
 	int ivsize = crypto_aead_ivsize(aead);
 	int sec4_sg_index, sec4_sg_len = 0, sec4_sg_bytes;
+	unsigned int authsize = ctx->authsize;
 
 	assoc_nents = sg_count(req->assoc, req->assoclen, &assoc_chained);
-	src_nents = sg_count(req->src, req->cryptlen, &src_chained);
 
-	if (unlikely(req->dst != req->src))
-		dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
+	if (unlikely(req->dst != req->src)) {
+		src_nents = sg_count(req->src, req->cryptlen, &src_chained);
+		dst_nents = sg_count(req->dst,
+				     req->cryptlen +
+					(encrypt ? authsize : (-authsize)),
+				     &dst_chained);
+	} else {
+		src_nents = sg_count(req->src,
+				     req->cryptlen +
+					(encrypt ? authsize : 0),
+				     &src_chained);
+	}
 
 	sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
 				 DMA_TO_DEVICE, assoc_chained);
@@ -1234,11 +1244,9 @@ static int aead_encrypt(struct aead_request *req)
 	u32 *desc;
 	int ret = 0;
 
-	req->cryptlen += ctx->authsize;
-
 	/* allocate extended descriptor */
 	edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
-				 CAAM_CMD_SZ, &all_contig);
+				 CAAM_CMD_SZ, &all_contig, true);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1275,7 +1283,7 @@ static int aead_decrypt(struct aead_request *req)
 
 	/* allocate extended descriptor */
 	edesc = aead_edesc_alloc(req, DESC_JOB_IO_LEN *
-				 CAAM_CMD_SZ, &all_contig);
+				 CAAM_CMD_SZ, &all_contig, false);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1332,7 +1340,8 @@ static struct aead_edesc *aead_giv_edesc_alloc(struct aead_givcrypt_request
 	src_nents = sg_count(req->src, req->cryptlen, &src_chained);
 
 	if (unlikely(req->dst != req->src))
-		dst_nents = sg_count(req->dst, req->cryptlen, &dst_chained);
+		dst_nents = sg_count(req->dst, req->cryptlen + ctx->authsize,
+				     &dst_chained);
 
 	sgc = dma_map_sg_chained(jrdev, req->assoc, assoc_nents ? : 1,
 				 DMA_TO_DEVICE, assoc_chained);
@@ -1426,8 +1435,6 @@ static int aead_givencrypt(struct aead_givcrypt_request *areq)
 	u32 *desc;
 	int ret = 0;
 
-	req->cryptlen += ctx->authsize;
-
 	/* allocate extended descriptor */
 	edesc = aead_giv_edesc_alloc(areq, DESC_JOB_IO_LEN *
 				     CAAM_CMD_SZ, &contig);

drivers/crypto/caam/jr.c

@@ -6,6 +6,7 @@
  */
 
 #include <linux/of_irq.h>
+#include <linux/of_address.h>
 
 #include "compat.h"
 #include "regs.h"

drivers/crypto/talitos.c

@@ -790,7 +790,7 @@ static void ipsec_esp_unmap(struct device *dev,
 
 	if (edesc->assoc_chained)
 		talitos_unmap_sg_chain(dev, areq->assoc, DMA_TO_DEVICE);
-	else
+	else if (areq->assoclen)
 		/* assoc_nents counts also for IV in non-contiguous cases */
 		dma_unmap_sg(dev, areq->assoc,
 			     edesc->assoc_nents ? edesc->assoc_nents - 1 : 1,
@@ -973,7 +973,11 @@ static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
 		dma_sync_single_for_device(dev, edesc->dma_link_tbl,
 					   edesc->dma_len, DMA_BIDIRECTIONAL);
 	} else {
-		to_talitos_ptr(&desc->ptr[1], sg_dma_address(areq->assoc));
+		if (areq->assoclen)
+			to_talitos_ptr(&desc->ptr[1],
+				       sg_dma_address(areq->assoc));
+		else
+			to_talitos_ptr(&desc->ptr[1], edesc->iv_dma);
 		desc->ptr[1].j_extent = 0;
 	}
 
@@ -1108,7 +1112,8 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 						 unsigned int authsize,
 						 unsigned int ivsize,
 						 int icv_stashing,
-						 u32 cryptoflags)
+						 u32 cryptoflags,
+						 bool encrypt)
 {
 	struct talitos_edesc *edesc;
 	int assoc_nents = 0, src_nents, dst_nents, alloc_len, dma_len;
@@ -1122,10 +1127,10 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 		return ERR_PTR(-EINVAL);
 	}
 
-	if (iv)
+	if (ivsize)
 		iv_dma = dma_map_single(dev, iv, ivsize, DMA_TO_DEVICE);
 
-	if (assoc) {
+	if (assoclen) {
 		/*
 		 * Currently it is assumed that iv is provided whenever assoc
 		 * is.
@@ -1141,19 +1146,17 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 			assoc_nents = assoc_nents ? assoc_nents + 1 : 2;
 	}
 
-	src_nents = sg_count(src, cryptlen + authsize, &src_chained);
-	src_nents = (src_nents == 1) ? 0 : src_nents;
-
-	if (!dst) {
-		dst_nents = 0;
-	} else {
-		if (dst == src) {
-			dst_nents = src_nents;
-		} else {
-			dst_nents = sg_count(dst, cryptlen + authsize,
-					     &dst_chained);
-			dst_nents = (dst_nents == 1) ? 0 : dst_nents;
-		}
+	if (!dst || dst == src) {
+		src_nents = sg_count(src, cryptlen + authsize, &src_chained);
+		src_nents = (src_nents == 1) ? 0 : src_nents;
+		dst_nents = dst ? src_nents : 0;
+	} else { /* dst && dst != src*/
+		src_nents = sg_count(src, cryptlen + (encrypt ? 0 : authsize),
+				     &src_chained);
+		src_nents = (src_nents == 1) ? 0 : src_nents;
+		dst_nents = sg_count(dst, cryptlen + (encrypt ? authsize : 0),
+				     &dst_chained);
+		dst_nents = (dst_nents == 1) ? 0 : dst_nents;
 	}
 
 	/*
@@ -1173,9 +1176,16 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 
 	edesc = kmalloc(alloc_len, GFP_DMA | flags);
 	if (!edesc) {
-		talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
+		if (assoc_chained)
+			talitos_unmap_sg_chain(dev, assoc, DMA_TO_DEVICE);
+		else if (assoclen)
+			dma_unmap_sg(dev, assoc,
+				     assoc_nents ? assoc_nents - 1 : 1,
+				     DMA_TO_DEVICE);
+
 		if (iv_dma)
 			dma_unmap_single(dev, iv_dma, ivsize, DMA_TO_DEVICE);
+
 		dev_err(dev, "could not allocate edescriptor\n");
 		return ERR_PTR(-ENOMEM);
 	}
@@ -1197,7 +1207,7 @@ static struct talitos_edesc *talitos_edesc_alloc(struct device *dev,
 }
 
 static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,
-					      int icv_stashing)
+					      int icv_stashing, bool encrypt)
 {
 	struct crypto_aead *authenc = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
@@ -1206,7 +1216,7 @@ static struct talitos_edesc *aead_edesc_alloc(struct aead_request *areq, u8 *iv,
 	return talitos_edesc_alloc(ctx->dev, areq->assoc, areq->src, areq->dst,
 				   iv, areq->assoclen, areq->cryptlen,
 				   ctx->authsize, ivsize, icv_stashing,
-				   areq->base.flags);
+				   areq->base.flags, encrypt);
 }
 
 static int aead_encrypt(struct aead_request *req)
@@ -1216,7 +1226,7 @@ static int aead_encrypt(struct aead_request *req)
 	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = aead_edesc_alloc(req, req->iv, 0);
+	edesc = aead_edesc_alloc(req, req->iv, 0, true);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1239,7 +1249,7 @@ static int aead_decrypt(struct aead_request *req)
 	req->cryptlen -= authsize;
 
 	/* allocate extended descriptor */
-	edesc = aead_edesc_alloc(req, req->iv, 1);
+	edesc = aead_edesc_alloc(req, req->iv, 1, false);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1285,7 +1295,7 @@ static int aead_givencrypt(struct aead_givcrypt_request *req)
 	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = aead_edesc_alloc(areq, req->giv, 0);
+	edesc = aead_edesc_alloc(areq, req->giv, 0, true);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1441,7 +1451,7 @@ static int common_nonsnoop(struct talitos_edesc *edesc,
 }
 
 static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
-						    areq)
+						    areq, bool encrypt)
 {
 	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
@@ -1449,7 +1459,7 @@ static struct talitos_edesc *ablkcipher_edesc_alloc(struct ablkcipher_request *
 
 	return talitos_edesc_alloc(ctx->dev, NULL, areq->src, areq->dst,
 				   areq->info, 0, areq->nbytes, 0, ivsize, 0,
-				   areq->base.flags);
+				   areq->base.flags, encrypt);
 }
 
 static int ablkcipher_encrypt(struct ablkcipher_request *areq)
@@ -1459,7 +1469,7 @@ static int ablkcipher_encrypt(struct ablkcipher_request *areq)
 	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ablkcipher_edesc_alloc(areq);
+	edesc = ablkcipher_edesc_alloc(areq, true);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1476,7 +1486,7 @@ static int ablkcipher_decrypt(struct ablkcipher_request *areq)
 	struct talitos_edesc *edesc;
 
 	/* allocate extended descriptor */
-	edesc = ablkcipher_edesc_alloc(areq);
+	edesc = ablkcipher_edesc_alloc(areq, false);
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
@@ -1628,7 +1638,7 @@ static struct talitos_edesc *ahash_edesc_alloc(struct ahash_request *areq,
 	struct talitos_ahash_req_ctx *req_ctx = ahash_request_ctx(areq);
 
 	return talitos_edesc_alloc(ctx->dev, NULL, req_ctx->psrc, NULL, NULL, 0,
-				   nbytes, 0, 0, 0, areq->base.flags);
+				   nbytes, 0, 0, 0, areq->base.flags, false);
 }
 
 static int ahash_init(struct ahash_request *areq)