Merge tag 'gemini-dts-update-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Pull "DTS changes to enable Ethernet on the Gemini boards" from Linus Walleij:

I realize it's late. Like really late. But Dmiller merged the ethernet
bindings and the driver for Gemini ethernet, and Gemini is all about
networking.

So for a late merge consideration here are the two patches giving
ethernet on Gemini, on top of what is already merged.

* tag 'gemini-dts-update-3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add ethernet to a bunch of platforms
  ARM: dts: Add ethernet to the Gemini SoC

arch/arm/boot/dts/gemini-dlink-dns-313.dts

@@ -214,6 +214,56 @@
 						groups = "gpio1dgrp";
 					};
 				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/*
+					 * In the vendor Linux tree, these values are set for the C3
+					 * version of the SL3512 ASIC with the comment "benson suggest"
+					 */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <10>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf3 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					conf6 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf7 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
 			};
 		};
 
@@ -234,6 +284,18 @@
 			pinctrl-0 = <&gpio1_default_pins>;
 		};
 
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
 		ata@63000000 {
 			status = "okay";
 		};

arch/arm/boot/dts/gemini-nas4220b.dts

@@ -129,6 +129,50 @@
 						groups = "gpio1dgrp";
 					};
 				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC", "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
 			};
 		};
 
@@ -143,6 +187,18 @@
 			pinctrl-0 = <&gpio1_default_pins>;
 		};
 
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
 		ata@63000000 {
 			status = "okay";
 		};

arch/arm/boot/dts/gemini-rut1xx.dts

@@ -114,5 +114,17 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&gpio1_default_pins>;
 		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
 	};
 };

arch/arm/boot/dts/gemini-wbd111.dts

@@ -160,5 +160,17 @@
 				<0x6000 0 0 3 &pci_intc 1>,
 				<0x6000 0 0 4 &pci_intc 2>;
 		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
 	};
 };

arch/arm/boot/dts/gemini-wbd222.dts

@@ -136,6 +136,13 @@
 						"gpio0bgrp";
 					};
 				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
 			};
 		};
 
@@ -165,5 +172,18 @@
 				<0x6000 0 0 3 &pci_intc 1>,
 				<0x6000 0 0 4 &pci_intc 2>;
 		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
 	};
 };

arch/arm/boot/dts/gemini.dtsi

@@ -114,9 +114,16 @@
 					};
 				};
 				gmii_default_pins: pinctrl-gmii {
+					/*
+					 * Only activate GMAC0 by default since
+					 * GMAC1 will overlap with 8 GPIO lines
+					 * gpio2a, gpio2b. Overlay groups with
+					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+					 * both ethernet interfaces.
+					 */
 					mux {
 						function = "gmii";
-						groups = "gmiigrp";
+						groups = "gmii_gmac0_grp";
 					};
 				};
 				pci_default_pins: pinctrl-pci {
@@ -316,6 +323,41 @@
 			};
 		};
 
+		ethernet@60000000 {
+			compatible = "cortina,gemini-ethernet";
+			reg = <0x60000000 0x4000>, /* Global registers, queue */
+			      <0x60004000 0x2000>, /* V-bit */
+			      <0x60006000 0x2000>; /* A-bit */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmii_default_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gmac0: ethernet-port@0 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+				      <0x6000a000 0x2000>; /* Port 0 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC0>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+				clock-names = "PCLK";
+			};
+
+			gmac1: ethernet-port@1 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+				      <0x6000e000 0x2000>; /* Port 1 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC1>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+				clock-names = "PCLK";
+			};
+		};
+
 		ata@63000000 {
 			compatible = "cortina,gemini-pata", "faraday,ftide010";
 			reg = <0x63000000 0x1000>;