Merge tag 'usb-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: patches for v4.8 merge window

Here's the big pull request for Peripheral stack and
all related drivers.

This time around with 109 non-merge commits mostly
concentrated on drivers/usb/gadget/udc (41.5%) and
drivers/usb/dwc3 (28.1%).

There's a big rework on dwc3's transfer handling
which gave us almost 3x faster USB3 speeds with Mass
Storage on a particular test scenario I measured. We
are also removing platform_data from dwc3 after
converting all users to built-in properties instead.

For the Gadget API, we're just adding tracepoints to
aid debugging activities.

Other than these, there's the usual set of spelling
fixes, minor bug fixes and sparse warnings cleanups.

drivers/phy/Kconfig

@@ -176,6 +176,7 @@ config TWL4030_USB
 	tristate "TWL4030 USB Transceiver Driver"
 	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
 	depends on USB_SUPPORT
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
 	select GENERIC_PHY
 	select USB_PHY
 	help

drivers/power/Kconfig

@@ -309,6 +309,7 @@ config BATTERY_RX51
 config CHARGER_ISP1704
 	tristate "ISP1704 USB Charger Detection"
 	depends on USB_PHY
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	help
 	  Say Y to enable support for USB Charger Detection with
 	  ISP1707/ISP1704 USB transceivers.

drivers/usb/common/common.c

@@ -131,15 +131,17 @@ EXPORT_SYMBOL_GPL(usb_get_dr_mode);
  * of_usb_get_dr_mode_by_phy - Get dual role mode for the controller device
  * which is associated with the given phy device_node
  * @np:	Pointer to the given phy device_node
+ * @arg0: phandle args[0] for phy's with #phy-cells >= 1, or -1 for
+ *        phys which do not have phy-cells
  *
  * In dts a usb controller associates with phy devices.  The function gets
  * the string from property 'dr_mode' of the controller associated with the
  * given phy device node, and returns the correspondig enum usb_dr_mode.
  */
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	struct device_node *controller = NULL;
-	struct device_node *phy;
+	struct of_phandle_args args;
 	const char *dr_mode;
 	int index;
 	int err;
@@ -148,12 +150,24 @@ enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
 		controller = of_find_node_with_property(controller, "phys");
 		index = 0;
 		do {
-			phy = of_parse_phandle(controller, "phys", index);
-			of_node_put(phy);
-			if (phy == phy_np)
+			if (arg0 == -1) {
+				args.np = of_parse_phandle(controller, "phys",
+							index);
+				args.args_count = 0;
+			} else {
+				err = of_parse_phandle_with_args(controller,
+							"phys", "#phy-cells",
+							index, &args);
+				if (err)
+					break;
+			}
+
+			of_node_put(args.np);
+			if (args.np == np && (args.args_count == 0 ||
+					      args.args[0] == arg0))
 				goto finish;
 			index++;
-		} while (phy);
+		} while (args.np);
 	} while (controller);
 
 finish:

drivers/usb/dwc2/Kconfig

@@ -55,6 +55,7 @@ endchoice
 config USB_DWC2_PCI
 	tristate "DWC2 PCI"
 	depends on PCI
+	depends on USB_GADGET || !USB_GADGET
 	default n
 	select NOP_USB_XCEIV
 	help

drivers/usb/dwc2/core.h

@@ -166,7 +166,7 @@ struct dwc2_hsotg_req;
  *          means that it is sending data to the Host.
  * @index: The index for the endpoint registers.
  * @mc: Multi Count - number of transactions per microframe
- * @interval - Interval for periodic endpoints
+ * @interval - Interval for periodic endpoints, in frames or microframes.
  * @name: The name array passed to the USB core.
  * @halted: Set if the endpoint has been halted.
  * @periodic: Set if this is a periodic ep, such as Interrupt
@@ -177,6 +177,8 @@ struct dwc2_hsotg_req;
  * @fifo_load: The amount of data loaded into the FIFO (periodic IN)
  * @last_load: The offset of data for the last start of request.
  * @size_loaded: The last loaded size for DxEPTSIZE for periodic IN
+ * @target_frame: Targeted frame num to setup next ISOC transfer
+ * @frame_overrun: Indicates SOF number overrun in DSTS
  *
  * This is the driver's state for each registered enpoint, allowing it
  * to keep track of transactions that need doing. Each endpoint has a
@@ -213,7 +215,9 @@ struct dwc2_hsotg_ep {
 	unsigned int            periodic:1;
 	unsigned int            isochronous:1;
 	unsigned int            send_zlp:1;
-	unsigned int            has_correct_parity:1;
+	unsigned int            target_frame;
+#define TARGET_FRAME_INITIAL   0xFFFFFFFF
+	bool			frame_overrun;
 
 	char                    name[10];
 };

drivers/usb/dwc2/gadget.c

@@ -96,6 +96,25 @@ static inline bool using_dma(struct dwc2_hsotg *hsotg)
 	return hsotg->g_using_dma;
 }
 
+/**
+ * dwc2_gadget_incr_frame_num - Increments the targeted frame number.
+ * @hs_ep: The endpoint
+ * @increment: The value to increment by
+ *
+ * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT.
+ * If an overrun occurs it will wrap the value and set the frame_overrun flag.
+ */
+static inline void dwc2_gadget_incr_frame_num(struct dwc2_hsotg_ep *hs_ep)
+{
+	hs_ep->target_frame += hs_ep->interval;
+	if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) {
+		hs_ep->frame_overrun = 1;
+		hs_ep->target_frame &= DSTS_SOFFN_LIMIT;
+	} else {
+		hs_ep->frame_overrun = 0;
+	}
+}
+
 /**
  * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
  * @hsotg: The device state
@@ -503,6 +522,23 @@ static unsigned get_ep_limit(struct dwc2_hsotg_ep *hs_ep)
 	return maxsize;
 }
 
+/**
+* dwc2_hsotg_read_frameno - read current frame number
+* @hsotg: The device instance
+*
+* Return the current frame number
+*/
+static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
+{
+	u32 dsts;
+
+	dsts = dwc2_readl(hsotg->regs + DSTS);
+	dsts &= DSTS_SOFFN_MASK;
+	dsts >>= DSTS_SOFFN_SHIFT;
+
+	return dsts;
+}
+
 /**
  * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
  * @hsotg: The controller state.
@@ -631,8 +667,17 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 			__func__, &ureq->dma, dma_reg);
 	}
 
+	if (hs_ep->isochronous && hs_ep->interval == 1) {
+		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		dwc2_gadget_incr_frame_num(hs_ep);
+
+		if (hs_ep->target_frame & 0x1)
+			ctrl |= DXEPCTL_SETODDFR;
+		else
+			ctrl |= DXEPCTL_SETEVENFR;
+	}
+
 	ctrl |= DXEPCTL_EPENA;	/* ensure ep enabled */
-	ctrl |= DXEPCTL_USBACTEP;
 
 	dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state);
 
@@ -658,14 +703,6 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 		dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req);
 	}
 
-	/*
-	 * clear the INTknTXFEmpMsk when we start request, more as a aide
-	 * to debugging to see what is going on.
-	 */
-	if (dir_in)
-		dwc2_writel(DIEPMSK_INTKNTXFEMPMSK,
-		       hsotg->regs + DIEPINT(index));
-
 	/*
 	 * Note, trying to clear the NAK here causes problems with transmit
 	 * on the S3C6400 ending up with the TXFIFO becoming full.
@@ -773,6 +810,30 @@ static void dwc2_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg,
 	hs_req->saved_req_buf = NULL;
 }
 
+/**
+ * dwc2_gadget_target_frame_elapsed - Checks target frame
+ * @hs_ep: The driver endpoint to check
+ *
+ * Returns 1 if targeted frame elapsed. If returned 1 then we need to drop
+ * corresponding transfer.
+ */
+static bool dwc2_gadget_target_frame_elapsed(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	u32 target_frame = hs_ep->target_frame;
+	u32 current_frame = dwc2_hsotg_read_frameno(hsotg);
+	bool frame_overrun = hs_ep->frame_overrun;
+
+	if (!frame_overrun && current_frame >= target_frame)
+		return true;
+
+	if (frame_overrun && current_frame >= target_frame &&
+	    ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2))
+		return true;
+
+	return false;
+}
+
 static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 			      gfp_t gfp_flags)
 {
@@ -812,9 +873,18 @@ static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
 	first = list_empty(&hs_ep->queue);
 	list_add_tail(&hs_req->queue, &hs_ep->queue);
 
-	if (first)
-		dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+	if (first) {
+		if (!hs_ep->isochronous) {
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+			return 0;
+		}
+
+		while (dwc2_gadget_target_frame_elapsed(hs_ep))
+			dwc2_gadget_incr_frame_num(hs_ep);
 
+		if (hs_ep->target_frame != TARGET_FRAME_INITIAL)
+			dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
+	}
 	return 0;
 }
 
@@ -1034,6 +1104,42 @@ static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep)
 	return list_first_entry(&hs_ep->queue, struct dwc2_hsotg_req, queue);
 }
 
+/**
+ * dwc2_gadget_start_next_request - Starts next request from ep queue
+ * @hs_ep: Endpoint structure
+ *
+ * If queue is empty and EP is ISOC-OUT - unmasks OUTTKNEPDIS which is masked
+ * in its handler. Hence we need to unmask it here to be able to do
+ * resynchronization.
+ */
+static void dwc2_gadget_start_next_request(struct dwc2_hsotg_ep *hs_ep)
+{
+	u32 mask;
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+	struct dwc2_hsotg_req *hs_req;
+	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
+
+	if (!list_empty(&hs_ep->queue)) {
+		hs_req = get_ep_head(hs_ep);
+		dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
+		return;
+	}
+	if (!hs_ep->isochronous)
+		return;
+
+	if (dir_in) {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-IN requests\n",
+			__func__);
+	} else {
+		dev_dbg(hsotg->dev, "%s: No more ISOC-OUT requests\n",
+			__func__);
+		mask = dwc2_readl(hsotg->regs + epmsk_reg);
+		mask |= DOEPMSK_OUTTKNEPDISMSK;
+		dwc2_writel(mask, hsotg->regs + epmsk_reg);
+	}
+}
+
 /**
  * dwc2_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE
  * @hsotg: The device state
@@ -1044,7 +1150,6 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 {
 	struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
 	struct dwc2_hsotg_req *hs_req;
-	bool restart;
 	bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
 	struct dwc2_hsotg_ep *ep;
 	int ret;
@@ -1127,12 +1232,7 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
 
 				/* If we have pending request, then start it */
 				if (!ep->req) {
-					restart = !list_empty(&ep->queue);
-					if (restart) {
-						hs_req = get_ep_head(ep);
-						dwc2_hsotg_start_req(hsotg, ep,
-								hs_req, false);
-					}
+					dwc2_gadget_start_next_request(ep);
 				}
 			}
 
@@ -1373,7 +1473,6 @@ static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
 				       struct dwc2_hsotg_req *hs_req,
 				       int result)
 {
-	bool restart;
 
 	if (!hs_req) {
 		dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
@@ -1417,11 +1516,7 @@ static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
 	 */
 
 	if (!hs_ep->req && result >= 0) {
-		restart = !list_empty(&hs_ep->queue);
-		if (restart) {
-			hs_req = get_ep_head(hs_ep);
-			dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
-		}
+		dwc2_gadget_start_next_request(hs_ep);
 	}
 }
 
@@ -1597,31 +1692,15 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
 	 * adjust the ISOC parity here.
 	 */
 	if (!using_dma(hsotg)) {
-		hs_ep->has_correct_parity = 1;
 		if (hs_ep->isochronous && hs_ep->interval == 1)
 			dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum));
+		else if (hs_ep->isochronous && hs_ep->interval > 1)
+			dwc2_gadget_incr_frame_num(hs_ep);
 	}
 
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
 
-/**
- * dwc2_hsotg_read_frameno - read current frame number
- * @hsotg: The device instance
- *
- * Return the current frame number
- */
-static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
-{
-	u32 dsts;
-
-	dsts = dwc2_readl(hsotg->regs + DSTS);
-	dsts &= DSTS_SOFFN_MASK;
-	dsts >>= DSTS_SOFFN_SHIFT;
-
-	return dsts;
-}
-
 /**
  * dwc2_hsotg_handle_rx - RX FIFO has data
  * @hsotg: The device instance
@@ -1936,6 +2015,190 @@ static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg,
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
 }
 
+/**
+ * dwc2_gadget_read_ep_interrupts - reads interrupts for given ep
+ * @hsotg: The device state.
+ * @idx: Index of ep.
+ * @dir_in: Endpoint direction 1-in 0-out.
+ *
+ * Reads for endpoint with given index and direction, by masking
+ * epint_reg with coresponding mask.
+ */
+static u32 dwc2_gadget_read_ep_interrupts(struct dwc2_hsotg *hsotg,
+					  unsigned int idx, int dir_in)
+{
+	u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK;
+	u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
+	u32 ints;
+	u32 mask;
+	u32 diepempmsk;
+
+	mask = dwc2_readl(hsotg->regs + epmsk_reg);
+	diepempmsk = dwc2_readl(hsotg->regs + DIEPEMPMSK);
+	mask |= ((diepempmsk >> idx) & 0x1) ? DIEPMSK_TXFIFOEMPTY : 0;
+	mask |= DXEPINT_SETUP_RCVD;
+
+	ints = dwc2_readl(hsotg->regs + epint_reg);
+	ints &= mask;
+	return ints;
+}
+
+/**
+ * dwc2_gadget_handle_ep_disabled - handle DXEPINT_EPDISBLD
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This interrupt indicates that the endpoint has been disabled per the
+ * application's request.
+ *
+ * For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK,
+ * in case of ISOC completes current request.
+ *
+ * For ISOC-OUT endpoints completes expired requests. If there is remaining
+ * request starts it.
+ */
+static void dwc2_gadget_handle_ep_disabled(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	struct dwc2_hsotg_req *hs_req;
+	unsigned char idx = hs_ep->index;
+	int dir_in = hs_ep->dir_in;
+	u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
+	int dctl = dwc2_readl(hsotg->regs + DCTL);
+
+	dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+
+	if (dir_in) {
+		int epctl = dwc2_readl(hsotg->regs + epctl_reg);
+
+		dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
+
+		if (hs_ep->isochronous) {
+			dwc2_hsotg_complete_in(hsotg, hs_ep);
+			return;
+		}
+
+		if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) {
+			int dctl = dwc2_readl(hsotg->regs + DCTL);
+
+			dctl |= DCTL_CGNPINNAK;
+			dwc2_writel(dctl, hsotg->regs + DCTL);
+		}
+		return;
+	}
+
+	if (dctl & DCTL_GOUTNAKSTS) {
+		dctl |= DCTL_CGOUTNAK;
+		dwc2_writel(dctl, hsotg->regs + DCTL);
+	}
+
+	if (!hs_ep->isochronous)
+		return;
+
+	if (list_empty(&hs_ep->queue)) {
+		dev_dbg(hsotg->dev, "%s: complete_ep 0x%p, ep->queue empty!\n",
+			__func__, hs_ep);
+		return;
+	}
+
+	do {
+		hs_req = get_ep_head(hs_ep);
+		if (hs_req)
+			dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req,
+						    -ENODATA);
+		dwc2_gadget_incr_frame_num(hs_ep);
+	} while (dwc2_gadget_target_frame_elapsed(hs_ep));
+
+	dwc2_gadget_start_next_request(hs_ep);
+}
+
+/**
+ * dwc2_gadget_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS
+ * @hs_ep: The endpoint on which interrupt is asserted.
+ *
+ * This is starting point for ISOC-OUT transfer, synchronization done with
+ * first out token received from host while corresponding EP is disabled.
+ *
+ * Device does not know initial frame in which out token will come. For this
+ * HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon
+ * getting this interrupt SW starts calculation for next transfer frame.
+ */
+static void dwc2_gadget_handle_out_token_ep_disabled(struct dwc2_hsotg_ep *ep)
+{
+	struct dwc2_hsotg *hsotg = ep->parent;
+	int dir_in = ep->dir_in;
+	u32 doepmsk;
+
+	if (dir_in || !ep->isochronous)
+		return;
+
+	dwc2_hsotg_complete_request(hsotg, ep, get_ep_head(ep), -ENODATA);
+
+	if (ep->interval > 1 &&
+	    ep->target_frame == TARGET_FRAME_INITIAL) {
+		u32 dsts;
+		u32 ctrl;
+
+		dsts = dwc2_readl(hsotg->regs + DSTS);
+		ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		dwc2_gadget_incr_frame_num(ep);
+
+		ctrl = dwc2_readl(hsotg->regs + DOEPCTL(ep->index));
+		if (ep->target_frame & 0x1)
+			ctrl |= DXEPCTL_SETODDFR;
+		else
+			ctrl |= DXEPCTL_SETEVENFR;
+
+		dwc2_writel(ctrl, hsotg->regs + DOEPCTL(ep->index));
+	}
+
+	dwc2_gadget_start_next_request(ep);
+	doepmsk = dwc2_readl(hsotg->regs + DOEPMSK);
+	doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK;
+	dwc2_writel(doepmsk, hsotg->regs + DOEPMSK);
+}
+
+/**
+* dwc2_gadget_handle_nak - handle NAK interrupt
+* @hs_ep: The endpoint on which interrupt is asserted.
+*
+* This is starting point for ISOC-IN transfer, synchronization done with
+* first IN token received from host while corresponding EP is disabled.
+*
+* Device does not know when first one token will arrive from host. On first
+* token arrival HW generates 2 interrupts: 'in token received while FIFO empty'
+* and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was
+* sent in response to that as there was no data in FIFO. SW is basing on this
+* interrupt to obtain frame in which token has come and then based on the
+* interval calculates next frame for transfer.
+*/
+static void dwc2_gadget_handle_nak(struct dwc2_hsotg_ep *hs_ep)
+{
+	struct dwc2_hsotg *hsotg = hs_ep->parent;
+	int dir_in = hs_ep->dir_in;
+
+	if (!dir_in || !hs_ep->isochronous)
+		return;
+
+	if (hs_ep->target_frame == TARGET_FRAME_INITIAL) {
+		hs_ep->target_frame = dwc2_hsotg_read_frameno(hsotg);
+		if (hs_ep->interval > 1) {
+			u32 ctrl = dwc2_readl(hsotg->regs +
+					      DIEPCTL(hs_ep->index));
+			if (hs_ep->target_frame & 0x1)
+				ctrl |= DXEPCTL_SETODDFR;
+			else
+				ctrl |= DXEPCTL_SETEVENFR;
+
+			dwc2_writel(ctrl, hsotg->regs + DIEPCTL(hs_ep->index));
+		}
+
+		dwc2_hsotg_complete_request(hsotg, hs_ep,
+					    get_ep_head(hs_ep), 0);
+	}
+
+	dwc2_gadget_incr_frame_num(hs_ep);
+}
+
 /**
  * dwc2_hsotg_epint - handle an in/out endpoint interrupt
  * @hsotg: The driver state
@@ -1954,7 +2217,7 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 	u32 ints;
 	u32 ctrl;
 
-	ints = dwc2_readl(hsotg->regs + epint_reg);
+	ints = dwc2_gadget_read_ep_interrupts(hsotg, idx, dir_in);
 	ctrl = dwc2_readl(hsotg->regs + epctl_reg);
 
 	/* Clear endpoint interrupts */
@@ -1973,11 +2236,10 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 	if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
 		ints &= ~DXEPINT_XFERCOMPL;
 
-	if (ints & DXEPINT_XFERCOMPL) {
-		hs_ep->has_correct_parity = 1;
-		if (hs_ep->isochronous && hs_ep->interval == 1)
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
+	if (ints & DXEPINT_STSPHSERCVD)
+		dev_dbg(hsotg->dev, "%s: StsPhseRcvd asserted\n", __func__);
 
+	if (ints & DXEPINT_XFERCOMPL) {
 		dev_dbg(hsotg->dev,
 			"%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
 			__func__, dwc2_readl(hsotg->regs + epctl_reg),
@@ -1988,7 +2250,12 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 		 * at completing IN requests here
 		 */
 		if (dir_in) {
+			if (hs_ep->isochronous && hs_ep->interval > 1)
+				dwc2_gadget_incr_frame_num(hs_ep);
+
 			dwc2_hsotg_complete_in(hsotg, hs_ep);
+			if (ints & DXEPINT_NAKINTRPT)
+				ints &= ~DXEPINT_NAKINTRPT;
 
 			if (idx == 0 && !hs_ep->req)
 				dwc2_hsotg_enqueue_setup(hsotg);
@@ -1997,28 +2264,21 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 			 * We're using DMA, we need to fire an OutDone here
 			 * as we ignore the RXFIFO.
 			 */
+			if (hs_ep->isochronous && hs_ep->interval > 1)
+				dwc2_gadget_incr_frame_num(hs_ep);
 
 			dwc2_hsotg_handle_outdone(hsotg, idx);
 		}
 	}
 
-	if (ints & DXEPINT_EPDISBLD) {
-		dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
+	if (ints & DXEPINT_EPDISBLD)
+		dwc2_gadget_handle_ep_disabled(hs_ep);
 
-		if (dir_in) {
-			int epctl = dwc2_readl(hsotg->regs + epctl_reg);
+	if (ints & DXEPINT_OUTTKNEPDIS)
+		dwc2_gadget_handle_out_token_ep_disabled(hs_ep);
 
-			dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
-
-			if ((epctl & DXEPCTL_STALL) &&
-				(epctl & DXEPCTL_EPTYPE_BULK)) {
-				int dctl = dwc2_readl(hsotg->regs + DCTL);
-
-				dctl |= DCTL_CGNPINNAK;
-				dwc2_writel(dctl, hsotg->regs + DCTL);
-			}
-		}
-	}
+	if (ints & DXEPINT_NAKINTRPT)
+		dwc2_gadget_handle_nak(hs_ep);
 
 	if (ints & DXEPINT_AHBERR)
 		dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
@@ -2046,20 +2306,20 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 
 	if (dir_in && !hs_ep->isochronous) {
 		/* not sure if this is important, but we'll clear it anyway */
-		if (ints & DIEPMSK_INTKNTXFEMPMSK) {
+		if (ints & DXEPINT_INTKNTXFEMP) {
 			dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
 				__func__, idx);
 		}
 
 		/* this probably means something bad is happening */
-		if (ints & DIEPMSK_INTKNEPMISMSK) {
+		if (ints & DXEPINT_INTKNEPMIS) {
 			dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
 				 __func__, idx);
 		}
 
 		/* FIFO has space or is empty (see GAHBCFG) */
 		if (hsotg->dedicated_fifos &&
-		    ints & DIEPMSK_TXFIFOEMPTY) {
+		    ints & DXEPINT_TXFEMP) {
 			dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
 				__func__, idx);
 			if (!using_dma(hsotg))
@@ -2322,18 +2582,16 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 	dwc2_writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
 		DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
 		DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
-		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
-		DIEPMSK_INTKNEPMISMSK,
+		DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK,
 		hsotg->regs + DIEPMSK);
 
 	/*
 	 * don't need XferCompl, we get that from RXFIFO in slave mode. In
 	 * DMA mode we may need this.
 	 */
-	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
-				    DIEPMSK_TIMEOUTMSK) : 0) |
+	dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK) : 0) |
 		DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
-		DOEPMSK_SETUPMSK,
+		DOEPMSK_SETUPMSK | DOEPMSK_STSPHSERCVDMSK,
 		hsotg->regs + DOEPMSK);
 
 	dwc2_writel(0, hsotg->regs + DAINTMSK);
@@ -2413,6 +2671,85 @@ void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg)
 	__bic32(hsotg->regs + DCTL, DCTL_SFTDISCON);
 }
 
+/**
+ * dwc2_gadget_handle_incomplete_isoc_in - handle incomplete ISO IN Interrupt.
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted IN Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Disable EP; when 'Endpoint Disabled' interrupt is received Flush FIFO
+ */
+static void dwc2_gadget_handle_incomplete_isoc_in(struct dwc2_hsotg *hsotg)
+{
+	struct dwc2_hsotg_ep *hs_ep;
+	u32 epctrl;
+	u32 idx;
+
+	dev_dbg(hsotg->dev, "Incomplete isoc in interrupt received:\n");
+
+	for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_in[idx];
+		epctrl = dwc2_readl(hsotg->regs + DIEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			epctrl |= DXEPCTL_SNAK;
+			epctrl |= DXEPCTL_EPDIS;
+			dwc2_writel(epctrl, hsotg->regs + DIEPCTL(idx));
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_INCOMPL_SOIN, hsotg->regs + GINTSTS);
+}
+
+/**
+ * dwc2_gadget_handle_incomplete_isoc_out - handle incomplete ISO OUT Interrupt
+ * @hsotg: The device state:
+ *
+ * This interrupt indicates one of the following conditions occurred while
+ * transmitting an ISOC transaction.
+ * - Corrupted OUT Token for ISOC EP.
+ * - Packet not complete in FIFO.
+ *
+ * The following actions will be taken:
+ * - Determine the EP
+ * - Set DCTL_SGOUTNAK and unmask GOUTNAKEFF if target frame elapsed.
+ */
+static void dwc2_gadget_handle_incomplete_isoc_out(struct dwc2_hsotg *hsotg)
+{
+	u32 gintsts;
+	u32 gintmsk;
+	u32 epctrl;
+	struct dwc2_hsotg_ep *hs_ep;
+	int idx;
+
+	dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
+
+	for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+		hs_ep = hsotg->eps_out[idx];
+		epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx));
+		if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous &&
+		    dwc2_gadget_target_frame_elapsed(hs_ep)) {
+			/* Unmask GOUTNAKEFF interrupt */
+			gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+			gintmsk |= GINTSTS_GOUTNAKEFF;
+			dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
+
+			gintsts = dwc2_readl(hsotg->regs + GINTSTS);
+			if (!(gintsts & GINTSTS_GOUTNAKEFF))
+				__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
+		}
+	}
+
+	/* Clear interrupt */
+	dwc2_writel(GINTSTS_INCOMPL_SOOUT, hsotg->regs + GINTSTS);
+}
+
 /**
  * dwc2_hsotg_irq - handle device interrupt
  * @irq: The IRQ number triggered
@@ -2545,11 +2882,29 @@ irq_retry:
 	 */
 
 	if (gintsts & GINTSTS_GOUTNAKEFF) {
-		dev_info(hsotg->dev, "GOUTNakEff triggered\n");
+		u8 idx;
+		u32 epctrl;
+		u32 gintmsk;
+		struct dwc2_hsotg_ep *hs_ep;
 
-		__orr32(hsotg->regs + DCTL, DCTL_CGOUTNAK);
+		/* Mask this interrupt */
+		gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
+		gintmsk &= ~GINTSTS_GOUTNAKEFF;
+		dwc2_writel(gintmsk, hsotg->regs + GINTMSK);
 
-		dwc2_hsotg_dump(hsotg);
+		dev_dbg(hsotg->dev, "GOUTNakEff triggered\n");
+		for (idx = 1; idx <= hsotg->num_of_eps; idx++) {
+			hs_ep = hsotg->eps_out[idx];
+			epctrl = dwc2_readl(hsotg->regs + DOEPCTL(idx));
+
+			if ((epctrl & DXEPCTL_EPENA) && hs_ep->isochronous) {
+				epctrl |= DXEPCTL_SNAK;
+				epctrl |= DXEPCTL_EPDIS;
+				dwc2_writel(epctrl, hsotg->regs + DOEPCTL(idx));
+			}
+		}
+
+		/* This interrupt bit is cleared in DXEPINT_EPDISBLD handler */
 	}
 
 	if (gintsts & GINTSTS_GINNAKEFF) {
@@ -2560,39 +2915,11 @@ irq_retry:
 		dwc2_hsotg_dump(hsotg);
 	}
 
-	if (gintsts & GINTSTS_INCOMPL_SOIN) {
-		u32 idx, epctl_reg;
-		struct dwc2_hsotg_ep *hs_ep;
-
-		dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOIN\n", __func__);
-		for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-			hs_ep = hsotg->eps_in[idx];
-
-			if (!hs_ep->isochronous || hs_ep->has_correct_parity)
-				continue;
+	if (gintsts & GINTSTS_INCOMPL_SOIN)
+		dwc2_gadget_handle_incomplete_isoc_in(hsotg);
 
-			epctl_reg = DIEPCTL(idx);
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
-		}
-		dwc2_writel(GINTSTS_INCOMPL_SOIN, hsotg->regs + GINTSTS);
-	}
-
-	if (gintsts & GINTSTS_INCOMPL_SOOUT) {
-		u32 idx, epctl_reg;
-		struct dwc2_hsotg_ep *hs_ep;
-
-		dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
-		for (idx = 1; idx < hsotg->num_of_eps; idx++) {
-			hs_ep = hsotg->eps_out[idx];
-
-			if (!hs_ep->isochronous || hs_ep->has_correct_parity)
-				continue;
-
-			epctl_reg = DOEPCTL(idx);
-			dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
-		}
-		dwc2_writel(GINTSTS_INCOMPL_SOOUT, hsotg->regs + GINTSTS);
-	}
+	if (gintsts & GINTSTS_INCOMPL_SOOUT)
+		dwc2_gadget_handle_incomplete_isoc_out(hsotg);
 
 	/*
 	 * if we've had fifo events, we should try and go around the
@@ -2624,6 +2951,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	u32 epctrl_reg;
 	u32 epctrl;
 	u32 mps;
+	u32 mask;
 	unsigned int dir_in;
 	unsigned int i, val, size;
 	int ret = 0;
@@ -2666,15 +2994,6 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	 */
 	epctrl |= DXEPCTL_USBACTEP;
 
-	/*
-	 * set the NAK status on the endpoint, otherwise we might try and
-	 * do something with data that we've yet got a request to process
-	 * since the RXFIFO will take data for an endpoint even if the
-	 * size register hasn't been set.
-	 */
-
-	epctrl |= DXEPCTL_SNAK;
-
 	/* update the endpoint state */
 	dwc2_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, dir_in);
 
@@ -2683,18 +3002,24 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	hs_ep->periodic = 0;
 	hs_ep->halted = 0;
 	hs_ep->interval = desc->bInterval;
-	hs_ep->has_correct_parity = 0;
-
-	if (hs_ep->interval > 1 && hs_ep->mc > 1)
-		dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
 
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_ISOC:
 		epctrl |= DXEPCTL_EPTYPE_ISO;
 		epctrl |= DXEPCTL_SETEVENFR;
 		hs_ep->isochronous = 1;
-		if (dir_in)
+		hs_ep->interval = 1 << (desc->bInterval - 1);
+		hs_ep->target_frame = TARGET_FRAME_INITIAL;
+		if (dir_in) {
 			hs_ep->periodic = 1;
+			mask = dwc2_readl(hsotg->regs + DIEPMSK);
+			mask |= DIEPMSK_NAKMSK;
+			dwc2_writel(mask, hsotg->regs + DIEPMSK);
+		} else {
+			mask = dwc2_readl(hsotg->regs + DOEPMSK);
+			mask |= DOEPMSK_OUTTKNEPDISMSK;
+			dwc2_writel(mask, hsotg->regs + DOEPMSK);
+		}
 		break;
 
 	case USB_ENDPOINT_XFER_BULK:
@@ -2705,6 +3030,9 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 		if (dir_in)
 			hs_ep->periodic = 1;
 
+		if (hsotg->gadget.speed == USB_SPEED_HIGH)
+			hs_ep->interval = 1 << (desc->bInterval - 1);
+
 		epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
 		break;
 
@@ -2758,7 +3086,7 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	}
 
 	/* for non control endpoints, set PID to D0 */
-	if (index)
+	if (index && !hs_ep->isochronous)
 		epctrl |= DXEPCTL_SETD0PID;
 
 	dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
@@ -2875,10 +3203,8 @@ static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
 			dev_warn(hsotg->dev,
 				"%s: timeout DIEPINT.NAKEFF\n", __func__);
 	} else {
-		/* Clear any pending nak effect interrupt */
-		dwc2_writel(GINTSTS_GOUTNAKEFF, hsotg->regs + GINTSTS);
-
-		__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
+		if (!(dwc2_readl(hsotg->regs + GINTSTS) & GINTSTS_GOUTNAKEFF))
+			__orr32(hsotg->regs + DCTL, DCTL_SGOUTNAK);
 
 		/* Wait for global nak to take effect */
 		if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,

drivers/usb/dwc2/hcd_queue.c

@@ -367,7 +367,8 @@ static void pmap_unschedule(unsigned long *map, int bits_per_period,
  * @fmt:   The format for printf.
  * @...:   The args for printf.
  */
-static void cat_printf(char **buf, size_t *size, const char *fmt, ...)
+static __printf(3, 4)
+void cat_printf(char **buf, size_t *size, const char *fmt, ...)
 {
 	va_list args;
 	int i;

drivers/usb/dwc2/hw.h

@@ -459,6 +459,9 @@
 #define DSTS_SUSPSTS			(1 << 0)
 
 #define DIEPMSK				HSOTG_REG(0x810)
+#define DIEPMSK_NAKMSK			(1 << 13)
+#define DIEPMSK_BNAININTRMSK		(1 << 9)
+#define DIEPMSK_TXFIFOUNDRNMSK		(1 << 8)
 #define DIEPMSK_TXFIFOEMPTY		(1 << 7)
 #define DIEPMSK_INEPNAKEFFMSK		(1 << 6)
 #define DIEPMSK_INTKNEPMISMSK		(1 << 5)
@@ -470,6 +473,7 @@
 
 #define DOEPMSK				HSOTG_REG(0x814)
 #define DOEPMSK_BACK2BACKSETUP		(1 << 6)
+#define DOEPMSK_STSPHSERCVDMSK		(1 << 5)
 #define DOEPMSK_OUTTKNEPDISMSK		(1 << 4)
 #define DOEPMSK_SETUPMSK		(1 << 3)
 #define DOEPMSK_AHBERRMSK		(1 << 2)
@@ -486,6 +490,7 @@
 #define DTKNQR2				HSOTG_REG(0x824)
 #define DTKNQR3				HSOTG_REG(0x830)
 #define DTKNQR4				HSOTG_REG(0x834)
+#define DIEPEMPMSK			HSOTG_REG(0x834)
 
 #define DVBUSDIS			HSOTG_REG(0x828)
 #define DVBUSPULSE			HSOTG_REG(0x82C)
@@ -544,9 +549,18 @@
 #define DIEPINT(_a)			HSOTG_REG(0x908 + ((_a) * 0x20))
 #define DOEPINT(_a)			HSOTG_REG(0xB08 + ((_a) * 0x20))
 #define DXEPINT_SETUP_RCVD		(1 << 15)
+#define DXEPINT_NYETINTRPT		(1 << 14)
+#define DXEPINT_NAKINTRPT		(1 << 13)
+#define DXEPINT_BBLEERRINTRPT		(1 << 12)
+#define DXEPINT_PKTDRPSTS		(1 << 11)
+#define DXEPINT_BNAINTR			(1 << 9)
+#define DXEPINT_TXFIFOUNDRN		(1 << 8)
+#define DXEPINT_OUTPKTERR		(1 << 8)
+#define DXEPINT_TXFEMP			(1 << 7)
 #define DXEPINT_INEPNAKEFF		(1 << 6)
 #define DXEPINT_BACK2BACKSETUP		(1 << 6)
 #define DXEPINT_INTKNEPMIS		(1 << 5)
+#define DXEPINT_STSPHSERCVD		(1 << 5)
 #define DXEPINT_INTKNTXFEMP		(1 << 4)
 #define DXEPINT_OUTTKNEPDIS		(1 << 4)
 #define DXEPINT_TIMEOUT			(1 << 3)

drivers/usb/dwc3/core.c

@@ -41,14 +41,13 @@
 #include <linux/usb/of.h>
 #include <linux/usb/otg.h>
 
-#include "platform_data.h"
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
 
 #include "debug.h"
 
-/* -------------------------------------------------------------------------- */
+#define DWC3_DEFAULT_AUTOSUSPEND_DELAY	5000 /* ms */
 
 void dwc3_set_mode(struct dwc3 *dwc, u32 mode)
 {
@@ -149,9 +148,8 @@ static int dwc3_soft_reset(struct dwc3 *dwc)
 /*
  * dwc3_frame_length_adjustment - Adjusts frame length if required
  * @dwc3: Pointer to our controller context structure
- * @fladj: Value of GFLADJ_30MHZ to adjust frame length
  */
-static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
+static void dwc3_frame_length_adjustment(struct dwc3 *dwc)
 {
 	u32 reg;
 	u32 dft;
@@ -159,15 +157,15 @@ static void dwc3_frame_length_adjustment(struct dwc3 *dwc, u32 fladj)
 	if (dwc->revision < DWC3_REVISION_250A)
 		return;
 
-	if (fladj == 0)
+	if (dwc->fladj == 0)
 		return;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GFLADJ);
 	dft = reg & DWC3_GFLADJ_30MHZ_MASK;
-	if (!dev_WARN_ONCE(dwc->dev, dft == fladj,
+	if (!dev_WARN_ONCE(dwc->dev, dft == dwc->fladj,
 	    "request value same as default, ignoring\n")) {
 		reg &= ~DWC3_GFLADJ_30MHZ_MASK;
-		reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | fladj;
+		reg |= DWC3_GFLADJ_30MHZ_SDBND_SEL | dwc->fladj;
 		dwc3_writel(dwc->regs, DWC3_GFLADJ, reg);
 	}
 }
@@ -507,6 +505,21 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 	return 0;
 }
 
+static void dwc3_core_exit(struct dwc3 *dwc)
+{
+	dwc3_event_buffers_cleanup(dwc);
+
+	usb_phy_shutdown(dwc->usb2_phy);
+	usb_phy_shutdown(dwc->usb3_phy);
+	phy_exit(dwc->usb2_generic_phy);
+	phy_exit(dwc->usb3_generic_phy);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	phy_power_off(dwc->usb2_generic_phy);
+	phy_power_off(dwc->usb3_generic_phy);
+}
+
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -556,6 +569,10 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	if (ret)
 		goto err0;
 
+	ret = dwc3_phy_setup(dwc);
+	if (ret)
+		goto err0;
+
 	reg = dwc3_readl(dwc->regs, DWC3_GCTL);
 	reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
 
@@ -622,22 +639,45 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	if (dwc->revision < DWC3_REVISION_190A)
 		reg |= DWC3_GCTL_U2RSTECN;
 
-	dwc3_core_num_eps(dwc);
-
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
 
-	ret = dwc3_alloc_scratch_buffers(dwc);
-	if (ret)
-		goto err1;
+	dwc3_core_num_eps(dwc);
 
 	ret = dwc3_setup_scratch_buffers(dwc);
 	if (ret)
+		goto err1;
+
+	/* Adjust Frame Length */
+	dwc3_frame_length_adjustment(dwc);
+
+	usb_phy_set_suspend(dwc->usb2_phy, 0);
+	usb_phy_set_suspend(dwc->usb3_phy, 0);
+	ret = phy_power_on(dwc->usb2_generic_phy);
+	if (ret < 0)
 		goto err2;
 
+	ret = phy_power_on(dwc->usb3_generic_phy);
+	if (ret < 0)
+		goto err3;
+
+	ret = dwc3_event_buffers_setup(dwc);
+	if (ret) {
+		dev_err(dwc->dev, "failed to setup event buffers\n");
+		goto err4;
+	}
+
 	return 0;
 
+err4:
+	phy_power_off(dwc->usb2_generic_phy);
+
+err3:
+	phy_power_off(dwc->usb3_generic_phy);
+
 err2:
-	dwc3_free_scratch_buffers(dwc);
+	usb_phy_set_suspend(dwc->usb2_phy, 1);
+	usb_phy_set_suspend(dwc->usb3_phy, 1);
+	dwc3_core_exit(dwc);
 
 err1:
 	usb_phy_shutdown(dwc->usb2_phy);
@@ -649,15 +689,6 @@ err0:
 	return ret;
 }
 
-static void dwc3_core_exit(struct dwc3 *dwc)
-{
-	dwc3_free_scratch_buffers(dwc);
-	usb_phy_shutdown(dwc->usb2_phy);
-	usb_phy_shutdown(dwc->usb3_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
-}
-
 static int dwc3_core_get_phy(struct dwc3 *dwc)
 {
 	struct device		*dev = dwc->dev;
@@ -735,7 +766,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize gadget\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize gadget\n");
 			return ret;
 		}
 		break;
@@ -743,7 +775,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_HOST);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize host\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize host\n");
 			return ret;
 		}
 		break;
@@ -751,13 +784,15 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_OTG);
 		ret = dwc3_host_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize host\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize host\n");
 			return ret;
 		}
 
 		ret = dwc3_gadget_init(dwc);
 		if (ret) {
-			dev_err(dev, "failed to initialize gadget\n");
+			if (ret != -EPROBE_DEFER)
+				dev_err(dev, "failed to initialize gadget\n");
 			return ret;
 		}
 		break;
@@ -793,13 +828,11 @@ static void dwc3_core_exit_mode(struct dwc3 *dwc)
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
-	struct dwc3_platform_data *pdata = dev_get_platdata(dev);
 	struct resource		*res;
 	struct dwc3		*dwc;
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u32			fladj = 0;
 
 	int			ret;
 
@@ -814,16 +847,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	dwc->mem = mem;
 	dwc->dev = dev;
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(dev, "missing IRQ\n");
-		return -ENODEV;
-	}
-	dwc->xhci_resources[1].start = res->start;
-	dwc->xhci_resources[1].end = res->end;
-	dwc->xhci_resources[1].flags = res->flags;
-	dwc->xhci_resources[1].name = res->name;
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res) {
 		dev_err(dev, "missing memory resource\n");
@@ -909,40 +932,7 @@ static int dwc3_probe(struct platform_device *pdev)
 	device_property_read_string(dev, "snps,hsphy_interface",
 				    &dwc->hsphy_interface);
 	device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
-				 &fladj);
-
-	if (pdata) {
-		dwc->maximum_speed = pdata->maximum_speed;
-		dwc->has_lpm_erratum = pdata->has_lpm_erratum;
-		if (pdata->lpm_nyet_threshold)
-			lpm_nyet_threshold = pdata->lpm_nyet_threshold;
-		dwc->is_utmi_l1_suspend = pdata->is_utmi_l1_suspend;
-		if (pdata->hird_threshold)
-			hird_threshold = pdata->hird_threshold;
-
-		dwc->usb3_lpm_capable = pdata->usb3_lpm_capable;
-		dwc->dr_mode = pdata->dr_mode;
-
-		dwc->disable_scramble_quirk = pdata->disable_scramble_quirk;
-		dwc->u2exit_lfps_quirk = pdata->u2exit_lfps_quirk;
-		dwc->u2ss_inp3_quirk = pdata->u2ss_inp3_quirk;
-		dwc->req_p1p2p3_quirk = pdata->req_p1p2p3_quirk;
-		dwc->del_p1p2p3_quirk = pdata->del_p1p2p3_quirk;
-		dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk;
-		dwc->lfps_filter_quirk = pdata->lfps_filter_quirk;
-		dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk;
-		dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk;
-		dwc->dis_u2_susphy_quirk = pdata->dis_u2_susphy_quirk;
-		dwc->dis_enblslpm_quirk = pdata->dis_enblslpm_quirk;
-		dwc->dis_rxdet_inp3_quirk = pdata->dis_rxdet_inp3_quirk;
-
-		dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk;
-		if (pdata->tx_de_emphasis)
-			tx_de_emphasis = pdata->tx_de_emphasis;
-
-		dwc->hsphy_interface = pdata->hsphy_interface;
-		fladj = pdata->fladj_value;
-	}
+				 &dwc->fladj);
 
 	dwc->lpm_nyet_threshold = lpm_nyet_threshold;
 	dwc->tx_de_emphasis = tx_de_emphasis;
@@ -953,10 +943,6 @@ static int dwc3_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, dwc);
 	dwc3_cache_hwparams(dwc);
 
-	ret = dwc3_phy_setup(dwc);
-	if (ret)
-		goto err0;
-
 	ret = dwc3_core_get_phy(dwc);
 	if (ret)
 		goto err0;
@@ -969,29 +955,43 @@ static int dwc3_probe(struct platform_device *pdev)
 		dma_set_coherent_mask(dev, dev->parent->coherent_dma_mask);
 	}
 
+	pm_runtime_set_active(dev);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY);
 	pm_runtime_enable(dev);
-	pm_runtime_get_sync(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0)
+		goto err1;
+
 	pm_runtime_forbid(dev);
 
 	ret = dwc3_alloc_event_buffers(dwc, DWC3_EVENT_BUFFERS_SIZE);
 	if (ret) {
 		dev_err(dwc->dev, "failed to allocate event buffers\n");
 		ret = -ENOMEM;
-		goto err1;
+		goto err2;
 	}
 
-	if (IS_ENABLED(CONFIG_USB_DWC3_HOST))
+	if (IS_ENABLED(CONFIG_USB_DWC3_HOST) &&
+			(dwc->dr_mode == USB_DR_MODE_OTG ||
+					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
 		dwc->dr_mode = USB_DR_MODE_HOST;
-	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET))
+	else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET) &&
+			(dwc->dr_mode == USB_DR_MODE_OTG ||
+					dwc->dr_mode == USB_DR_MODE_UNKNOWN))
 		dwc->dr_mode = USB_DR_MODE_PERIPHERAL;
 
 	if (dwc->dr_mode == USB_DR_MODE_UNKNOWN)
 		dwc->dr_mode = USB_DR_MODE_OTG;
 
+	ret = dwc3_alloc_scratch_buffers(dwc);
+	if (ret)
+		goto err3;
+
 	ret = dwc3_core_init(dwc);
 	if (ret) {
 		dev_err(dev, "failed to initialize core\n");
-		goto err1;
+		goto err4;
 	}
 
 	/* Check the maximum_speed parameter */
@@ -1021,31 +1021,12 @@ static int dwc3_probe(struct platform_device *pdev)
 		break;
 	}
 
-	/* Adjust Frame Length */
-	dwc3_frame_length_adjustment(dwc, fladj);
-
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-	ret = phy_power_on(dwc->usb2_generic_phy);
-	if (ret < 0)
-		goto err2;
-
-	ret = phy_power_on(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err3;
-
-	ret = dwc3_event_buffers_setup(dwc);
-	if (ret) {
-		dev_err(dwc->dev, "failed to setup event buffers\n");
-		goto err4;
-	}
-
 	ret = dwc3_core_init_mode(dwc);
 	if (ret)
 		goto err5;
 
 	dwc3_debugfs_init(dwc);
-	pm_runtime_allow(dev);
+	pm_runtime_put(dev);
 
 	return 0;
 
@@ -1053,19 +1034,18 @@ err5:
 	dwc3_event_buffers_cleanup(dwc);
 
 err4:
-	phy_power_off(dwc->usb3_generic_phy);
+	dwc3_free_scratch_buffers(dwc);
 
 err3:
-	phy_power_off(dwc->usb2_generic_phy);
+	dwc3_free_event_buffers(dwc);
+	dwc3_ulpi_exit(dwc);
 
 err2:
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	dwc3_core_exit(dwc);
+	pm_runtime_allow(&pdev->dev);
 
 err1:
-	dwc3_free_event_buffers(dwc);
-	dwc3_ulpi_exit(dwc);
+	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
 
 err0:
 	/*
@@ -1083,6 +1063,7 @@ static int dwc3_remove(struct platform_device *pdev)
 	struct dwc3	*dwc = platform_get_drvdata(pdev);
 	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 
+	pm_runtime_get_sync(&pdev->dev);
 	/*
 	 * restore res->start back to its original value so that, in case the
 	 * probe is deferred, we don't end up getting error in request the
@@ -1092,133 +1073,192 @@ static int dwc3_remove(struct platform_device *pdev)
 
 	dwc3_debugfs_exit(dwc);
 	dwc3_core_exit_mode(dwc);
-	dwc3_event_buffers_cleanup(dwc);
-	dwc3_free_event_buffers(dwc);
-
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	phy_power_off(dwc->usb2_generic_phy);
-	phy_power_off(dwc->usb3_generic_phy);
 
 	dwc3_core_exit(dwc);
 	dwc3_ulpi_exit(dwc);
 
 	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_allow(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
+	dwc3_free_event_buffers(dwc);
+	dwc3_free_scratch_buffers(dwc);
+
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
-static int dwc3_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int dwc3_suspend_common(struct dwc3 *dwc)
 {
-	struct dwc3	*dwc = dev_get_drvdata(dev);
 	unsigned long	flags;
 
-	spin_lock_irqsave(&dwc->lock, flags);
-
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
+		spin_lock_irqsave(&dwc->lock, flags);
 		dwc3_gadget_suspend(dwc);
-		/* FALLTHROUGH */
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		break;
 	case USB_DR_MODE_HOST:
 	default:
-		dwc3_event_buffers_cleanup(dwc);
+		/* do nothing */
 		break;
 	}
 
-	dwc->gctl = dwc3_readl(dwc->regs, DWC3_GCTL);
-	spin_unlock_irqrestore(&dwc->lock, flags);
+	dwc3_core_exit(dwc);
 
-	usb_phy_shutdown(dwc->usb3_phy);
-	usb_phy_shutdown(dwc->usb2_phy);
-	phy_exit(dwc->usb2_generic_phy);
-	phy_exit(dwc->usb3_generic_phy);
+	return 0;
+}
 
-	usb_phy_set_suspend(dwc->usb2_phy, 1);
-	usb_phy_set_suspend(dwc->usb3_phy, 1);
-	WARN_ON(phy_power_off(dwc->usb2_generic_phy) < 0);
-	WARN_ON(phy_power_off(dwc->usb3_generic_phy) < 0);
+static int dwc3_resume_common(struct dwc3 *dwc)
+{
+	unsigned long	flags;
+	int		ret;
 
-	pinctrl_pm_select_sleep_state(dev);
+	ret = dwc3_core_init(dwc);
+	if (ret)
+		return ret;
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		spin_lock_irqsave(&dwc->lock, flags);
+		dwc3_gadget_resume(dwc);
+		spin_unlock_irqrestore(&dwc->lock, flags);
+		/* FALLTHROUGH */
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
 
 	return 0;
 }
 
-static int dwc3_resume(struct device *dev)
+static int dwc3_runtime_checks(struct dwc3 *dwc)
 {
-	struct dwc3	*dwc = dev_get_drvdata(dev);
-	unsigned long	flags;
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		if (dwc->connected)
+			return -EBUSY;
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	return 0;
+}
+
+static int dwc3_runtime_suspend(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
 	int		ret;
 
-	pinctrl_pm_select_default_state(dev);
+	if (dwc3_runtime_checks(dwc))
+		return -EBUSY;
 
-	usb_phy_set_suspend(dwc->usb2_phy, 0);
-	usb_phy_set_suspend(dwc->usb3_phy, 0);
-	ret = phy_power_on(dwc->usb2_generic_phy);
-	if (ret < 0)
+	ret = dwc3_suspend_common(dwc);
+	if (ret)
 		return ret;
 
-	ret = phy_power_on(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err_usb2phy_power;
+	device_init_wakeup(dev, true);
 
-	usb_phy_init(dwc->usb3_phy);
-	usb_phy_init(dwc->usb2_phy);
-	ret = phy_init(dwc->usb2_generic_phy);
-	if (ret < 0)
-		goto err_usb3phy_power;
+	return 0;
+}
 
-	ret = phy_init(dwc->usb3_generic_phy);
-	if (ret < 0)
-		goto err_usb2phy_init;
+static int dwc3_runtime_resume(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+	int		ret;
 
-	spin_lock_irqsave(&dwc->lock, flags);
+	device_init_wakeup(dev, false);
 
-	dwc3_event_buffers_setup(dwc);
-	dwc3_writel(dwc->regs, DWC3_GCTL, dwc->gctl);
+	ret = dwc3_resume_common(dwc);
+	if (ret)
+		return ret;
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
 	case USB_DR_MODE_OTG:
-		dwc3_gadget_resume(dwc);
-		/* FALLTHROUGH */
+		dwc3_gadget_process_pending_events(dwc);
+		break;
 	case USB_DR_MODE_HOST:
 	default:
 		/* do nothing */
 		break;
 	}
 
-	spin_unlock_irqrestore(&dwc->lock, flags);
+	pm_runtime_mark_last_busy(dev);
 
-	pm_runtime_disable(dev);
-	pm_runtime_set_active(dev);
-	pm_runtime_enable(dev);
+	return 0;
+}
+
+static int dwc3_runtime_idle(struct device *dev)
+{
+	struct dwc3     *dwc = dev_get_drvdata(dev);
+
+	switch (dwc->dr_mode) {
+	case USB_DR_MODE_PERIPHERAL:
+	case USB_DR_MODE_OTG:
+		if (dwc3_runtime_checks(dwc))
+			return -EBUSY;
+		break;
+	case USB_DR_MODE_HOST:
+	default:
+		/* do nothing */
+		break;
+	}
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_autosuspend(dev);
 
 	return 0;
+}
+#endif /* CONFIG_PM */
 
-err_usb2phy_init:
-	phy_exit(dwc->usb2_generic_phy);
+#ifdef CONFIG_PM_SLEEP
+static int dwc3_suspend(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	int		ret;
 
-err_usb3phy_power:
-	phy_power_off(dwc->usb3_generic_phy);
+	ret = dwc3_suspend_common(dwc);
+	if (ret)
+		return ret;
 
-err_usb2phy_power:
-	phy_power_off(dwc->usb2_generic_phy);
+	pinctrl_pm_select_sleep_state(dev);
 
-	return ret;
+	return 0;
 }
 
+static int dwc3_resume(struct device *dev)
+{
+	struct dwc3	*dwc = dev_get_drvdata(dev);
+	int		ret;
+
+	pinctrl_pm_select_default_state(dev);
+
+	ret = dwc3_resume_common(dwc);
+	if (ret)
+		return ret;
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
 static const struct dev_pm_ops dwc3_dev_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_suspend, dwc3_resume)
+	SET_RUNTIME_PM_OPS(dwc3_runtime_suspend, dwc3_runtime_resume,
+			dwc3_runtime_idle)
 };
 
-#define DWC3_PM_OPS	&(dwc3_dev_pm_ops)
-#else
-#define DWC3_PM_OPS	NULL
-#endif
-
 #ifdef CONFIG_OF
 static const struct of_device_id of_dwc3_match[] = {
 	{
@@ -1250,7 +1290,7 @@ static struct platform_driver dwc3_driver = {
 		.name	= "dwc3",
 		.of_match_table	= of_match_ptr(of_dwc3_match),
 		.acpi_match_table = ACPI_PTR(dwc3_acpi_match),
-		.pm	= DWC3_PM_OPS,
+		.pm	= &dwc3_dev_pm_ops,
 	},
 };
 

drivers/usb/dwc3/core.h

@@ -86,6 +86,7 @@
 #define DWC3_GCTL		0xc110
 #define DWC3_GEVTEN		0xc114
 #define DWC3_GSTS		0xc118
+#define DWC3_GUCTL1		0xc11c
 #define DWC3_GSNPSID		0xc120
 #define DWC3_GGPIO		0xc124
 #define DWC3_GUID		0xc128
@@ -138,10 +139,12 @@
 #define DWC3_DGCMDPAR		0xc710
 #define DWC3_DGCMD		0xc714
 #define DWC3_DALEPENA		0xc720
-#define DWC3_DEPCMDPAR2(n)	(0xc800 + (n * 0x10))
-#define DWC3_DEPCMDPAR1(n)	(0xc804 + (n * 0x10))
-#define DWC3_DEPCMDPAR0(n)	(0xc808 + (n * 0x10))
-#define DWC3_DEPCMD(n)		(0xc80c + (n * 0x10))
+
+#define DWC3_DEP_BASE(n)	(0xc800 + (n * 0x10))
+#define DWC3_DEPCMDPAR2		0x00
+#define DWC3_DEPCMDPAR1		0x04
+#define DWC3_DEPCMDPAR0		0x08
+#define DWC3_DEPCMD		0x0c
 
 /* OTG Registers */
 #define DWC3_OCFG		0xcc00
@@ -231,6 +234,14 @@
 #define DWC3_GEVNTSIZ_INTMASK		(1 << 31)
 #define DWC3_GEVNTSIZ_SIZE(n)		((n) & 0xffff)
 
+/* Global HWPARAMS0 Register */
+#define DWC3_GHWPARAMS0_USB3_MODE(n)	((n) & 0x3)
+#define DWC3_GHWPARAMS0_MBUS_TYPE(n)	(((n) >> 3) & 0x7)
+#define DWC3_GHWPARAMS0_SBUS_TYPE(n)	(((n) >> 6) & 0x3)
+#define DWC3_GHWPARAMS0_MDWIDTH(n)	(((n) >> 8) & 0xff)
+#define DWC3_GHWPARAMS0_SDWIDTH(n)	(((n) >> 16) & 0xff)
+#define DWC3_GHWPARAMS0_AWIDTH(n)	(((n) >> 24) & 0xff)
+
 /* Global HWPARAMS1 Register */
 #define DWC3_GHWPARAMS1_EN_PWROPT(n)	(((n) & (3 << 24)) >> 24)
 #define DWC3_GHWPARAMS1_EN_PWROPT_NO	0
@@ -260,6 +271,10 @@
 /* Global HWPARAMS6 Register */
 #define DWC3_GHWPARAMS6_EN_FPGA			(1 << 7)
 
+/* Global HWPARAMS7 Register */
+#define DWC3_GHWPARAMS7_RAM1_DEPTH(n)	((n) & 0xffff)
+#define DWC3_GHWPARAMS7_RAM2_DEPTH(n)	(((n) >> 16) & 0xffff)
+
 /* Global Frame Length Adjustment Register */
 #define DWC3_GFLADJ_30MHZ_SDBND_SEL		(1 << 7)
 #define DWC3_GFLADJ_30MHZ_MASK			0x3f
@@ -468,6 +483,8 @@ struct dwc3_event_buffer {
  * @endpoint: usb endpoint
  * @pending_list: list of pending requests for this endpoint
  * @started_list: list of started requests on this endpoint
+ * @lock: spinlock for endpoint request queue traversal
+ * @regs: pointer to first endpoint register
  * @trb_pool: array of transaction buffers
  * @trb_pool_dma: dma address of @trb_pool
  * @trb_enqueue: enqueue 'pointer' into TRB array
@@ -480,6 +497,8 @@ struct dwc3_event_buffer {
  * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK
  * @resource_index: Resource transfer index
  * @interval: the interval on which the ISOC transfer is started
+ * @allocated_requests: number of requests allocated
+ * @queued_requests: number of requests queued for transfer
  * @name: a human readable name e.g. ep1out-bulk
  * @direction: true for TX, false for RX
  * @stream_capable: true when streams are enabled
@@ -489,6 +508,9 @@ struct dwc3_ep {
 	struct list_head	pending_list;
 	struct list_head	started_list;
 
+	spinlock_t		lock;
+	void __iomem		*regs;
+
 	struct dwc3_trb		*trb_pool;
 	dma_addr_t		trb_pool_dma;
 	const struct usb_ss_ep_comp_descriptor *comp_desc;
@@ -521,6 +543,8 @@ struct dwc3_ep {
 	u8			number;
 	u8			type;
 	u8			resource_index;
+	u32			allocated_requests;
+	u32			queued_requests;
 	u32			interval;
 
 	char			name[20];
@@ -712,6 +736,8 @@ struct dwc3_scratchpad_array {
  * @gadget_driver: pointer to the gadget driver
  * @regs: base address for our registers
  * @regs_size: address space size
+ * @fladj: frame length adjustment
+ * @irq_gadget: peripheral controller's IRQ number
  * @nr_scratch: number of scratch buffers
  * @u1u2: only used on revisions <1.83a for workaround
  * @maximum_speed: maximum speed requested (mainly for testing purposes)
@@ -744,6 +770,7 @@ struct dwc3_scratchpad_array {
  * @lpm_nyet_threshold: LPM NYET response threshold
  * @hird_threshold: HIRD threshold
  * @hsphy_interface: "utmi" or "ulpi"
+ * @connected: true when we're connected to a host, false otherwise
  * @delayed_status: true when gadget driver asks for delayed status
  * @ep0_bounced: true when we used bounce buffer
  * @ep0_expect_in: true when we expect a DATA IN transfer
@@ -754,6 +781,7 @@ struct dwc3_scratchpad_array {
  * 	0	- utmi_sleep_n
  * 	1	- utmi_l1_suspend_n
  * @is_fpga: true when we are using the FPGA board
+ * @pending_events: true when we have pending IRQs to be handled
  * @pullups_connected: true when Run/Stop bit is set
  * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
  * @start_config_issued: true when StartConfig command has been issued
@@ -818,10 +846,8 @@ struct dwc3 {
 
 	enum usb_dr_mode	dr_mode;
 
-	/* used for suspend/resume */
-	u32			dcfg;
-	u32			gctl;
-
+	u32			fladj;
+	u32			irq_gadget;
 	u32			nr_scratch;
 	u32			u1u2;
 	u32			maximum_speed;
@@ -860,7 +886,7 @@ struct dwc3 {
  * just so dwc31 revisions are always larger than dwc3.
  */
 #define DWC3_REVISION_IS_DWC31		0x80000000
-#define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_USB31)
+#define DWC3_USB31_REVISION_110A	(0x3131302a | DWC3_REVISION_IS_DWC31)
 
 	enum dwc3_ep0_next	ep0_next_event;
 	enum dwc3_ep0_state	ep0state;
@@ -890,6 +916,7 @@ struct dwc3 {
 
 	const char		*hsphy_interface;
 
+	unsigned		connected:1;
 	unsigned		delayed_status:1;
 	unsigned		ep0_bounced:1;
 	unsigned		ep0_expect_in:1;
@@ -897,6 +924,7 @@ struct dwc3 {
 	unsigned		has_lpm_erratum:1;
 	unsigned		is_utmi_l1_suspend:1;
 	unsigned		is_fpga:1;
+	unsigned		pending_events:1;
 	unsigned		pullups_connected:1;
 	unsigned		setup_packet_pending:1;
 	unsigned		three_stage_setup:1;
@@ -1094,8 +1122,8 @@ void dwc3_gadget_exit(struct dwc3 *dwc);
 int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode);
 int dwc3_gadget_get_link_state(struct dwc3 *dwc);
 int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state);
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params);
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params);
 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param);
 #else
 static inline int dwc3_gadget_init(struct dwc3 *dwc)
@@ -1110,8 +1138,8 @@ static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc,
 		enum dwc3_link_state state)
 { return 0; }
 
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
 { return 0; }
 static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 		int cmd, u32 param)
@@ -1122,6 +1150,7 @@ static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc,
 #if !IS_ENABLED(CONFIG_USB_DWC3_HOST)
 int dwc3_gadget_suspend(struct dwc3 *dwc);
 int dwc3_gadget_resume(struct dwc3 *dwc);
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc);
 #else
 static inline int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
@@ -1132,6 +1161,10 @@ static inline int dwc3_gadget_resume(struct dwc3 *dwc)
 {
 	return 0;
 }
+
+static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+}
 #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */
 
 #if IS_ENABLED(CONFIG_USB_DWC3_ULPI)

drivers/usb/dwc3/debug.h

@@ -128,56 +128,112 @@ dwc3_gadget_link_string(enum dwc3_link_state link_state)
  * dwc3_gadget_event_string - returns event name
  * @event: the event code
  */
-static inline const char *dwc3_gadget_event_string(u8 event)
+static inline const char *
+dwc3_gadget_event_string(const struct dwc3_event_devt *event)
 {
-	switch (event) {
+	static char str[256];
+	enum dwc3_link_state state = event->event_info & DWC3_LINK_STATE_MASK;
+
+	switch (event->type) {
 	case DWC3_DEVICE_EVENT_DISCONNECT:
-		return "Disconnect";
+		sprintf(str, "Disconnect: [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_RESET:
-		return "Reset";
+		sprintf(str, "Reset [%s]", dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_CONNECT_DONE:
-		return "Connection Done";
+		sprintf(str, "Connection Done [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE:
-		return "Link Status Change";
+		sprintf(str, "Link Change [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_WAKEUP:
-		return "WakeUp";
+		sprintf(str, "WakeUp [%s]", dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_EOPF:
-		return "End-Of-Frame";
+		sprintf(str, "End-Of-Frame [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_SOF:
-		return "Start-Of-Frame";
+		sprintf(str, "Start-Of-Frame [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_ERRATIC_ERROR:
-		return "Erratic Error";
+		sprintf(str, "Erratic Error [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_CMD_CMPL:
-		return "Command Complete";
+		sprintf(str, "Command Complete [%s]",
+				dwc3_gadget_link_string(state));
+		break;
 	case DWC3_DEVICE_EVENT_OVERFLOW:
-		return "Overflow";
+		sprintf(str, "Overflow [%s]", dwc3_gadget_link_string(state));
+		break;
+	default:
+		sprintf(str, "UNKNOWN");
 	}
 
-	return "UNKNOWN";
+	return str;
 }
 
 /**
  * dwc3_ep_event_string - returns event name
  * @event: then event code
  */
-static inline const char *dwc3_ep_event_string(u8 event)
+static inline const char *
+dwc3_ep_event_string(const struct dwc3_event_depevt *event)
 {
-	switch (event) {
+	u8 epnum = event->endpoint_number;
+	static char str[256];
+	int status;
+	int ret;
+
+	ret = sprintf(str, "ep%d%s: ", epnum >> 1,
+			(epnum & 1) ? "in" : "in");
+	if (ret < 0)
+		return "UNKNOWN";
+
+	switch (event->endpoint_event) {
 	case DWC3_DEPEVT_XFERCOMPLETE:
-		return "Transfer Complete";
+		strcat(str, "Transfer Complete");
+		break;
 	case DWC3_DEPEVT_XFERINPROGRESS:
-		return "Transfer In-Progress";
+		strcat(str, "Transfer In-Progress");
+		break;
 	case DWC3_DEPEVT_XFERNOTREADY:
-		return "Transfer Not Ready";
+		strcat(str, "Transfer Not Ready");
+		status = event->status & DEPEVT_STATUS_TRANSFER_ACTIVE;
+		strcat(str, status ? " (Active)" : " (Not Active)");
+		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		return "FIFO";
+		strcat(str, "FIFO");
+		break;
 	case DWC3_DEPEVT_STREAMEVT:
-		return "Stream";
+		status = event->status;
+
+		switch (status) {
+		case DEPEVT_STREAMEVT_FOUND:
+			sprintf(str + ret, " Stream %d Found",
+					event->parameters);
+			break;
+		case DEPEVT_STREAMEVT_NOTFOUND:
+		default:
+			strcat(str, " Stream Not Found");
+			break;
+		}
+
+		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
-		return "Endpoint Command Complete";
+		strcat(str, "Endpoint Command Complete");
+		break;
+	default:
+		sprintf(str, "UNKNOWN");
 	}
 
-	return "UNKNOWN";
+	return str;
 }
 
 /**
@@ -214,6 +270,46 @@ static inline const char *dwc3_gadget_event_type_string(u8 event)
 	}
 }
 
+static inline const char *dwc3_decode_event(u32 event)
+{
+	const union dwc3_event evt = (union dwc3_event) event;
+
+	if (evt.type.is_devspec)
+		return dwc3_gadget_event_string(&evt.devt);
+	else
+		return dwc3_ep_event_string(&evt.depevt);
+}
+
+static inline const char *dwc3_ep_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case DEPEVT_TRANSFER_NO_RESOURCE:
+		return "No Resource";
+	case DEPEVT_TRANSFER_BUS_EXPIRY:
+		return "Bus Expiry";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static inline const char *dwc3_gadget_generic_cmd_status_string(int status)
+{
+	switch (status) {
+	case -ETIMEDOUT:
+		return "Timed Out";
+	case 0:
+		return "Successful";
+	case 1:
+		return "Error";
+	default:
+		return "UNKNOWN";
+	}
+}
+
 void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...);
 
 #ifdef CONFIG_DEBUG_FS

drivers/usb/dwc3/debugfs.c

@@ -36,9 +36,32 @@
 #define dump_register(nm)				\
 {							\
 	.name	= __stringify(nm),			\
-	.offset	= DWC3_ ##nm - DWC3_GLOBALS_REGS_START,	\
+	.offset	= DWC3_ ##nm,				\
 }
 
+#define dump_ep_register_set(n)			\
+	{					\
+		.name = "DEPCMDPAR2("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR2,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR1("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR1,	\
+	},					\
+	{					\
+		.name = "DEPCMDPAR0("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMDPAR0,	\
+	},					\
+	{					\
+		.name = "DEPCMD("__stringify(n)")",	\
+		.offset = DWC3_DEP_BASE(n) +	\
+			DWC3_DEPCMD,		\
+	}
+
+
 static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GSBUSCFG0),
 	dump_register(GSBUSCFG1),
@@ -47,6 +70,7 @@ static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(GCTL),
 	dump_register(GEVTEN),
 	dump_register(GSTS),
+	dump_register(GUCTL1),
 	dump_register(GSNPSID),
 	dump_register(GGPIO),
 	dump_register(GUID),
@@ -218,137 +242,38 @@ static const struct debugfs_reg32 dwc3_regs[] = {
 	dump_register(DGCMD),
 	dump_register(DALEPENA),
 
-	dump_register(DEPCMDPAR2(0)),
-	dump_register(DEPCMDPAR2(1)),
-	dump_register(DEPCMDPAR2(2)),
-	dump_register(DEPCMDPAR2(3)),
-	dump_register(DEPCMDPAR2(4)),
-	dump_register(DEPCMDPAR2(5)),
-	dump_register(DEPCMDPAR2(6)),
-	dump_register(DEPCMDPAR2(7)),
-	dump_register(DEPCMDPAR2(8)),
-	dump_register(DEPCMDPAR2(9)),
-	dump_register(DEPCMDPAR2(10)),
-	dump_register(DEPCMDPAR2(11)),
-	dump_register(DEPCMDPAR2(12)),
-	dump_register(DEPCMDPAR2(13)),
-	dump_register(DEPCMDPAR2(14)),
-	dump_register(DEPCMDPAR2(15)),
-	dump_register(DEPCMDPAR2(16)),
-	dump_register(DEPCMDPAR2(17)),
-	dump_register(DEPCMDPAR2(18)),
-	dump_register(DEPCMDPAR2(19)),
-	dump_register(DEPCMDPAR2(20)),
-	dump_register(DEPCMDPAR2(21)),
-	dump_register(DEPCMDPAR2(22)),
-	dump_register(DEPCMDPAR2(23)),
-	dump_register(DEPCMDPAR2(24)),
-	dump_register(DEPCMDPAR2(25)),
-	dump_register(DEPCMDPAR2(26)),
-	dump_register(DEPCMDPAR2(27)),
-	dump_register(DEPCMDPAR2(28)),
-	dump_register(DEPCMDPAR2(29)),
-	dump_register(DEPCMDPAR2(30)),
-	dump_register(DEPCMDPAR2(31)),
-
-	dump_register(DEPCMDPAR1(0)),
-	dump_register(DEPCMDPAR1(1)),
-	dump_register(DEPCMDPAR1(2)),
-	dump_register(DEPCMDPAR1(3)),
-	dump_register(DEPCMDPAR1(4)),
-	dump_register(DEPCMDPAR1(5)),
-	dump_register(DEPCMDPAR1(6)),
-	dump_register(DEPCMDPAR1(7)),
-	dump_register(DEPCMDPAR1(8)),
-	dump_register(DEPCMDPAR1(9)),
-	dump_register(DEPCMDPAR1(10)),
-	dump_register(DEPCMDPAR1(11)),
-	dump_register(DEPCMDPAR1(12)),
-	dump_register(DEPCMDPAR1(13)),
-	dump_register(DEPCMDPAR1(14)),
-	dump_register(DEPCMDPAR1(15)),
-	dump_register(DEPCMDPAR1(16)),
-	dump_register(DEPCMDPAR1(17)),
-	dump_register(DEPCMDPAR1(18)),
-	dump_register(DEPCMDPAR1(19)),
-	dump_register(DEPCMDPAR1(20)),
-	dump_register(DEPCMDPAR1(21)),
-	dump_register(DEPCMDPAR1(22)),
-	dump_register(DEPCMDPAR1(23)),
-	dump_register(DEPCMDPAR1(24)),
-	dump_register(DEPCMDPAR1(25)),
-	dump_register(DEPCMDPAR1(26)),
-	dump_register(DEPCMDPAR1(27)),
-	dump_register(DEPCMDPAR1(28)),
-	dump_register(DEPCMDPAR1(29)),
-	dump_register(DEPCMDPAR1(30)),
-	dump_register(DEPCMDPAR1(31)),
-
-	dump_register(DEPCMDPAR0(0)),
-	dump_register(DEPCMDPAR0(1)),
-	dump_register(DEPCMDPAR0(2)),
-	dump_register(DEPCMDPAR0(3)),
-	dump_register(DEPCMDPAR0(4)),
-	dump_register(DEPCMDPAR0(5)),
-	dump_register(DEPCMDPAR0(6)),
-	dump_register(DEPCMDPAR0(7)),
-	dump_register(DEPCMDPAR0(8)),
-	dump_register(DEPCMDPAR0(9)),
-	dump_register(DEPCMDPAR0(10)),
-	dump_register(DEPCMDPAR0(11)),
-	dump_register(DEPCMDPAR0(12)),
-	dump_register(DEPCMDPAR0(13)),
-	dump_register(DEPCMDPAR0(14)),
-	dump_register(DEPCMDPAR0(15)),
-	dump_register(DEPCMDPAR0(16)),
-	dump_register(DEPCMDPAR0(17)),
-	dump_register(DEPCMDPAR0(18)),
-	dump_register(DEPCMDPAR0(19)),
-	dump_register(DEPCMDPAR0(20)),
-	dump_register(DEPCMDPAR0(21)),
-	dump_register(DEPCMDPAR0(22)),
-	dump_register(DEPCMDPAR0(23)),
-	dump_register(DEPCMDPAR0(24)),
-	dump_register(DEPCMDPAR0(25)),
-	dump_register(DEPCMDPAR0(26)),
-	dump_register(DEPCMDPAR0(27)),
-	dump_register(DEPCMDPAR0(28)),
-	dump_register(DEPCMDPAR0(29)),
-	dump_register(DEPCMDPAR0(30)),
-	dump_register(DEPCMDPAR0(31)),
-
-	dump_register(DEPCMD(0)),
-	dump_register(DEPCMD(1)),
-	dump_register(DEPCMD(2)),
-	dump_register(DEPCMD(3)),
-	dump_register(DEPCMD(4)),
-	dump_register(DEPCMD(5)),
-	dump_register(DEPCMD(6)),
-	dump_register(DEPCMD(7)),
-	dump_register(DEPCMD(8)),
-	dump_register(DEPCMD(9)),
-	dump_register(DEPCMD(10)),
-	dump_register(DEPCMD(11)),
-	dump_register(DEPCMD(12)),
-	dump_register(DEPCMD(13)),
-	dump_register(DEPCMD(14)),
-	dump_register(DEPCMD(15)),
-	dump_register(DEPCMD(16)),
-	dump_register(DEPCMD(17)),
-	dump_register(DEPCMD(18)),
-	dump_register(DEPCMD(19)),
-	dump_register(DEPCMD(20)),
-	dump_register(DEPCMD(21)),
-	dump_register(DEPCMD(22)),
-	dump_register(DEPCMD(23)),
-	dump_register(DEPCMD(24)),
-	dump_register(DEPCMD(25)),
-	dump_register(DEPCMD(26)),
-	dump_register(DEPCMD(27)),
-	dump_register(DEPCMD(28)),
-	dump_register(DEPCMD(29)),
-	dump_register(DEPCMD(30)),
-	dump_register(DEPCMD(31)),
+	dump_ep_register_set(0),
+	dump_ep_register_set(1),
+	dump_ep_register_set(2),
+	dump_ep_register_set(3),
+	dump_ep_register_set(4),
+	dump_ep_register_set(5),
+	dump_ep_register_set(6),
+	dump_ep_register_set(7),
+	dump_ep_register_set(8),
+	dump_ep_register_set(9),
+	dump_ep_register_set(10),
+	dump_ep_register_set(11),
+	dump_ep_register_set(12),
+	dump_ep_register_set(13),
+	dump_ep_register_set(14),
+	dump_ep_register_set(15),
+	dump_ep_register_set(16),
+	dump_ep_register_set(17),
+	dump_ep_register_set(18),
+	dump_ep_register_set(19),
+	dump_ep_register_set(20),
+	dump_ep_register_set(21),
+	dump_ep_register_set(22),
+	dump_ep_register_set(23),
+	dump_ep_register_set(24),
+	dump_ep_register_set(25),
+	dump_ep_register_set(26),
+	dump_ep_register_set(27),
+	dump_ep_register_set(28),
+	dump_ep_register_set(29),
+	dump_ep_register_set(30),
+	dump_ep_register_set(31),
 
 	dump_register(OCFG),
 	dump_register(OCTL),
@@ -939,7 +864,7 @@ void dwc3_debugfs_init(struct dwc3 *dwc)
 
 	dwc->regset->regs = dwc3_regs;
 	dwc->regset->nregs = ARRAY_SIZE(dwc3_regs);
-	dwc->regset->base = dwc->regs;
+	dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;
 
 	file = debugfs_create_regset32("regdump", S_IRUGO, root, dwc->regset);
 	if (!file)

drivers/usb/dwc3/dwc3-omap.c

@@ -165,7 +165,7 @@ static void dwc3_omap_write_utmi_ctrl(struct dwc3_omap *omap, u32 value)
 
 static u32 dwc3_omap_read_irq0_status(struct dwc3_omap *omap)
 {
-	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0 -
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_0 -
 						omap->irq0_offset);
 }
 
@@ -178,7 +178,7 @@ static void dwc3_omap_write_irq0_status(struct dwc3_omap *omap, u32 value)
 
 static u32 dwc3_omap_read_irqmisc_status(struct dwc3_omap *omap)
 {
-	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_MISC +
+	return dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_RAW_MISC +
 						omap->irqmisc_offset);
 }
 
@@ -231,35 +231,30 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 		}
 
 		val = dwc3_omap_read_utmi_ctrl(omap);
-		val &= ~(USBOTGSS_UTMI_OTG_CTRL_IDDIG
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSEND);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val &= ~USBOTGSS_UTMI_OTG_CTRL_IDDIG;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
 	case OMAP_DWC3_VBUS_VALID:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~USBOTGSS_UTMI_OTG_CTRL_SESSEND;
-		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT;
+		val |= USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
+				| USBOTGSS_UTMI_OTG_CTRL_SESSVALID;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
 	case OMAP_DWC3_ID_FLOAT:
 		if (omap->vbus_reg)
 			regulator_disable(omap->vbus_reg);
+		val = dwc3_omap_read_utmi_ctrl(omap);
+		val |= USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+		dwc3_omap_write_utmi_ctrl(omap, val);
 
 	case OMAP_DWC3_VBUS_OFF:
 		val = dwc3_omap_read_utmi_ctrl(omap);
 		val &= ~(USBOTGSS_UTMI_OTG_CTRL_SESSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID
-				| USBOTGSS_UTMI_OTG_CTRL_POWERPRESENT);
-		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND
-				| USBOTGSS_UTMI_OTG_CTRL_IDDIG;
+				| USBOTGSS_UTMI_OTG_CTRL_VBUSVALID);
+		val |= USBOTGSS_UTMI_OTG_CTRL_SESSEND;
 		dwc3_omap_write_utmi_ctrl(omap, val);
 		break;
 
@@ -268,19 +263,38 @@ static void dwc3_omap_set_mailbox(struct dwc3_omap *omap,
 	}
 }
 
+static void dwc3_omap_enable_irqs(struct dwc3_omap *omap);
+static void dwc3_omap_disable_irqs(struct dwc3_omap *omap);
+
 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
+{
+	struct dwc3_omap	*omap = _omap;
+
+	if (dwc3_omap_read_irqmisc_status(omap) ||
+	    dwc3_omap_read_irq0_status(omap)) {
+		/* mask irqs */
+		dwc3_omap_disable_irqs(omap);
+		return IRQ_WAKE_THREAD;
+	}
+
+	return IRQ_NONE;
+}
+
+static irqreturn_t dwc3_omap_interrupt_thread(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
 	u32			reg;
 
+	/* clear irq status flags */
 	reg = dwc3_omap_read_irqmisc_status(omap);
-
 	dwc3_omap_write_irqmisc_status(omap, reg);
 
 	reg = dwc3_omap_read_irq0_status(omap);
-
 	dwc3_omap_write_irq0_status(omap, reg);
 
+	/* unmask irqs */
+	dwc3_omap_enable_irqs(omap);
+
 	return IRQ_HANDLED;
 }
 
@@ -497,8 +511,9 @@ static int dwc3_omap_probe(struct platform_device *pdev)
 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 
-	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
-			"dwc3-omap", omap);
+	ret = devm_request_threaded_irq(dev, omap->irq, dwc3_omap_interrupt,
+					dwc3_omap_interrupt_thread, IRQF_SHARED,
+					"dwc3-omap", omap);
 	if (ret) {
 		dev_err(dev, "failed to request IRQ #%d --> %d\n",
 				omap->irq, ret);

drivers/usb/dwc3/dwc3-pci.c

@@ -20,11 +20,11 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
+#include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/gpio/consumer.h>
 #include <linux/acpi.h>
-
-#include "platform_data.h"
+#include <linux/delay.h>
 
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd
 #define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce
@@ -51,62 +51,70 @@ static int dwc3_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc3)
 {
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 	    pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
-		struct dwc3_platform_data pdata;
-
-		memset(&pdata, 0, sizeof(pdata));
-
-		pdata.has_lpm_erratum = true;
-		pdata.lpm_nyet_threshold = 0xf;
-
-		pdata.u2exit_lfps_quirk = true;
-		pdata.u2ss_inp3_quirk = true;
-		pdata.req_p1p2p3_quirk = true;
-		pdata.del_p1p2p3_quirk = true;
-		pdata.del_phy_power_chg_quirk = true;
-		pdata.lfps_filter_quirk = true;
-		pdata.rx_detect_poll_quirk = true;
-
-		pdata.tx_de_emphasis_quirk = true;
-		pdata.tx_de_emphasis = 1;
-
-		/*
-		 * FIXME these quirks should be removed when AMD NL
-		 * taps out
-		 */
-		pdata.disable_scramble_quirk = true;
-		pdata.dis_u3_susphy_quirk = true;
-		pdata.dis_u2_susphy_quirk = true;
-
-		return platform_device_add_data(dwc3, &pdata, sizeof(pdata));
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+			PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
+			PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
+			PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
+			/*
+			 * FIXME these quirks should be removed when AMD NL
+			 * tapes out
+			 */
+			PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
+			PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+			{ },
+		};
+
+		return platform_device_add_properties(dwc3, properties);
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
-	    pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
-		struct gpio_desc *gpio;
+	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
+		int ret;
 
-		acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
-					  acpi_dwc3_byt_gpios);
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_STRING("dr-mode", "peripheral"),
+			{ }
+		};
 
-		/*
-		 * These GPIOs will turn on the USB2 PHY. Note that we have to
-		 * put the gpio descriptors again here because the phy driver
-		 * might want to grab them, too.
-		 */
-		gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
-		if (IS_ERR(gpio))
-			return PTR_ERR(gpio);
+		ret = platform_device_add_properties(dwc3, properties);
+		if (ret < 0)
+			return ret;
 
-		gpiod_set_value_cansleep(gpio, 1);
-		gpiod_put(gpio);
+		if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
+			struct gpio_desc *gpio;
 
-		gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpio))
-			return PTR_ERR(gpio);
+			acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev),
+					acpi_dwc3_byt_gpios);
+
+			/*
+			 * These GPIOs will turn on the USB2 PHY. Note that we have to
+			 * put the gpio descriptors again here because the phy driver
+			 * might want to grab them, too.
+			 */
+			gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
 
-		if (gpio) {
 			gpiod_set_value_cansleep(gpio, 1);
 			gpiod_put(gpio);
-			usleep_range(10000, 11000);
+
+			gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW);
+			if (IS_ERR(gpio))
+				return PTR_ERR(gpio);
+
+			if (gpio) {
+				gpiod_set_value_cansleep(gpio, 1);
+				gpiod_put(gpio);
+				usleep_range(10000, 11000);
+			}
 		}
 	}
 
@@ -114,15 +122,14 @@ static int dwc3_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc3)
 	    (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
 	     pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
-
-		struct dwc3_platform_data pdata;
-
-		memset(&pdata, 0, sizeof(pdata));
-		pdata.usb3_lpm_capable = true;
-		pdata.has_lpm_erratum = true;
-		pdata.dis_enblslpm_quirk = true;
-
-		return platform_device_add_data(dwc3, &pdata, sizeof(pdata));
+		struct property_entry properties[] = {
+			PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
+			PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+			PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+			{ },
+		};
+
+		return platform_device_add_properties(dwc3, properties);
 	}
 
 	return 0;
@@ -180,7 +187,11 @@ static int dwc3_pci_probe(struct pci_dev *pci,
 		goto err;
 	}
 
+	device_init_wakeup(dev, true);
+	device_set_run_wake(dev, true);
 	pci_set_drvdata(pci, dwc3);
+	pm_runtime_put(dev);
+
 	return 0;
 err:
 	platform_device_put(dwc3);
@@ -189,6 +200,8 @@ err:
 
 static void dwc3_pci_remove(struct pci_dev *pci)
 {
+	device_init_wakeup(&pci->dev, false);
+	pm_runtime_get(&pci->dev);
 	acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev));
 	platform_device_unregister(pci_get_drvdata(pci));
 }
@@ -219,11 +232,43 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
 };
 MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
 
+#ifdef CONFIG_PM
+static int dwc3_pci_runtime_suspend(struct device *dev)
+{
+	if (device_run_wake(dev))
+		return 0;
+
+	return -EBUSY;
+}
+
+static int dwc3_pci_pm_dummy(struct device *dev)
+{
+	/*
+	 * There's nothing to do here. No, seriously. Everything is either taken
+	 * care either by PCI subsystem or dwc3/core.c, so we have nothing
+	 * missing here.
+	 *
+	 * So you'd think we didn't need this at all, but PCI subsystem will
+	 * bail out if we don't have a valid callback :-s
+	 */
+	return 0;
+}
+#endif /* CONFIG_PM */
+
+static struct dev_pm_ops dwc3_pci_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(dwc3_pci_pm_dummy, dwc3_pci_pm_dummy)
+	SET_RUNTIME_PM_OPS(dwc3_pci_runtime_suspend, dwc3_pci_pm_dummy,
+		NULL)
+};
+
 static struct pci_driver dwc3_pci_driver = {
 	.name		= "dwc3-pci",
 	.id_table	= dwc3_pci_id_table,
 	.probe		= dwc3_pci_probe,
 	.remove		= dwc3_pci_remove,
+	.driver		= {
+		.pm	= &dwc3_pci_dev_pm_ops,
+	}
 };
 
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");

drivers/usb/dwc3/ep0.c

@@ -98,8 +98,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 
 	trace_dwc3_prepare_trb(dep, trb);
 
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_STARTTRANSFER, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_STARTTRANSFER, &params);
 	if (ret < 0) {
 		dwc3_trace(trace_dwc3_ep0, "%s STARTTRANSFER failed",
 				dep->name);
@@ -107,9 +106,7 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 	}
 
 	dep->flags |= DWC3_EP_BUSY;
-	dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
-			dep->number);
-
+	dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
 	dwc->ep0_next_event = DWC3_EP0_COMPLETE;
 
 	return 0;
@@ -499,7 +496,7 @@ static int dwc3_ep0_handle_feature(struct dwc3 *dwc,
 	case USB_RECIP_ENDPOINT:
 		switch (wValue) {
 		case USB_ENDPOINT_HALT:
-			dep = dwc3_wIndex_to_dep(dwc, wIndex);
+			dep = dwc3_wIndex_to_dep(dwc, ctrl->wIndex);
 			if (!dep)
 				return -EINVAL;
 			if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
@@ -622,8 +619,8 @@ static void dwc3_ep0_set_sel_cmpl(struct usb_ep *ep, struct usb_request *req)
 	struct timing {
 		u8	u1sel;
 		u8	u1pel;
-		u16	u2sel;
-		u16	u2pel;
+		__le16	u2sel;
+		__le16	u2pel;
 	} __packed timing;
 
 	int		ret;
@@ -980,7 +977,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request");
 			return;
 		}
 
@@ -1008,7 +1005,7 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
 		ret = usb_gadget_map_request(&dwc->gadget, &req->request,
 				dep->number);
 		if (ret) {
-			dwc3_trace(trace_dwc3_ep0, "failed to map request\n");
+			dwc3_trace(trace_dwc3_ep0, "failed to map request");
 			return;
 		}
 
@@ -1058,7 +1055,7 @@ static void dwc3_ep0_end_control_data(struct dwc3 *dwc, struct dwc3_ep *dep)
 	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 }
@@ -1112,11 +1109,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc,
 void dwc3_ep0_interrupt(struct dwc3 *dwc,
 		const struct dwc3_event_depevt *event)
 {
-	u8			epnum = event->endpoint_number;
-
-	dwc3_trace(trace_dwc3_ep0, "%s while ep%d%s in state '%s'",
-			dwc3_ep_event_string(event->endpoint_event),
-			epnum >> 1, (epnum & 1) ? "in" : "out",
+	dwc3_trace(trace_dwc3_ep0, "%s: state '%s'",
+			dwc3_ep_event_string(event),
 			dwc3_ep0_state_string(dwc->ep0state));
 
 	switch (event->endpoint_event) {

drivers/usb/dwc3/gadget.c

@@ -145,21 +145,29 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
 	return -ETIMEDOUT;
 }
 
-static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
+/**
+ * dwc3_ep_inc_trb() - Increment a TRB index.
+ * @index - Pointer to the TRB index to increment.
+ *
+ * The index should never point to the link TRB. After incrementing,
+ * if it is point to the link TRB, wrap around to the beginning. The
+ * link TRB is always at the last TRB entry.
+ */
+static void dwc3_ep_inc_trb(u8 *index)
 {
-	dep->trb_enqueue++;
-	dep->trb_enqueue %= DWC3_TRB_NUM;
+	(*index)++;
+	if (*index == (DWC3_TRB_NUM - 1))
+		*index = 0;
 }
 
-static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
+static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
 {
-	dep->trb_dequeue++;
-	dep->trb_dequeue %= DWC3_TRB_NUM;
+	dwc3_ep_inc_trb(&dep->trb_enqueue);
 }
 
-static int dwc3_ep_is_last_trb(unsigned int index)
+static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
 {
-	return index == DWC3_TRB_NUM - 1;
+	dwc3_ep_inc_trb(&dep->trb_dequeue);
 }
 
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
@@ -172,13 +180,6 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		i = 0;
 		do {
 			dwc3_ep_inc_deq(dep);
-			/*
-			 * Skip LINK TRB. We can't use req->trb and check for
-			 * DWC3_TRBCTL_LINK_TRB because it points the TRB we
-			 * just completed (not the LINK TRB).
-			 */
-			if (dwc3_ep_is_last_trb(dep->trb_dequeue))
-				dwc3_ep_inc_deq(dep);
 		} while(++i < req->request.num_mapped_sgs);
 		req->started = false;
 	}
@@ -199,57 +200,54 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 	spin_unlock(&dwc->lock);
 	usb_gadget_giveback_request(&dep->endpoint, &req->request);
 	spin_lock(&dwc->lock);
+
+	if (dep->number > 1)
+		pm_runtime_put(dwc->dev);
 }
 
 int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
 {
 	u32		timeout = 500;
+	int		status = 0;
+	int		ret = 0;
 	u32		reg;
 
-	trace_dwc3_gadget_generic_cmd(cmd, param);
-
 	dwc3_writel(dwc->regs, DWC3_DGCMDPAR, param);
 	dwc3_writel(dwc->regs, DWC3_DGCMD, cmd | DWC3_DGCMD_CMDACT);
 
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DGCMD);
 		if (!(reg & DWC3_DGCMD_CMDACT)) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Complete --> %d",
-					DWC3_DGCMD_STATUS(reg));
-			if (DWC3_DGCMD_STATUS(reg))
-				return -EINVAL;
-			return 0;
+			status = DWC3_DGCMD_STATUS(reg);
+			if (status)
+				ret = -EINVAL;
+			break;
 		}
+	} while (timeout--);
 
-		/*
-		 * We can't sleep here, because it's also called from
-		 * interrupt context.
-		 */
-		timeout--;
-		if (!timeout) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Timed Out");
-			return -ETIMEDOUT;
-		}
-		udelay(1);
-	} while (1);
+	if (!timeout) {
+		ret = -ETIMEDOUT;
+		status = -ETIMEDOUT;
+	}
+
+	trace_dwc3_gadget_generic_cmd(cmd, param, status);
+
+	return ret;
 }
 
 static int __dwc3_gadget_wakeup(struct dwc3 *dwc);
 
-int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
+int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
+		struct dwc3_gadget_ep_cmd_params *params)
 {
-	struct dwc3_ep		*dep = dwc->eps[ep];
+	struct dwc3		*dwc = dep->dwc;
 	u32			timeout = 500;
 	u32			reg;
 
+	int			cmd_status = 0;
 	int			susphy = false;
 	int			ret = -EINVAL;
 
-	trace_dwc3_gadget_ep_cmd(dep, cmd, params);
-
 	/*
 	 * Synopsys Databook 2.60a states, on section 6.3.2.5.[1-8], that if
 	 * we're issuing an endpoint command, we must check if
@@ -258,11 +256,13 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 	 * We will also set SUSPHY bit to what it was before returning as stated
 	 * by the same section on Synopsys databook.
 	 */
-	reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
-	if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
-		susphy = true;
-		reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
-		dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+	if (dwc->gadget.speed <= USB_SPEED_HIGH) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
+		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
+			susphy = true;
+			reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+			dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
+		}
 	}
 
 	if (cmd == DWC3_DEPCMD_STARTTRANSFER) {
@@ -279,26 +279,21 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 		}
 	}
 
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR0, params->param0);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR1, params->param1);
+	dwc3_writel(dep->regs, DWC3_DEPCMDPAR2, params->param2);
 
-	dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
+	dwc3_writel(dep->regs, DWC3_DEPCMD, cmd | DWC3_DEPCMD_CMDACT);
 	do {
-		reg = dwc3_readl(dwc->regs, DWC3_DEPCMD(ep));
+		reg = dwc3_readl(dep->regs, DWC3_DEPCMD);
 		if (!(reg & DWC3_DEPCMD_CMDACT)) {
-			int cmd_status = DWC3_DEPCMD_STATUS(reg);
-
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Complete --> %d",
-					cmd_status);
+			cmd_status = DWC3_DEPCMD_STATUS(reg);
 
 			switch (cmd_status) {
 			case 0:
 				ret = 0;
 				break;
 			case DEPEVT_TRANSFER_NO_RESOURCE:
-				dwc3_trace(trace_dwc3_gadget, "%s: no resource available");
 				ret = -EINVAL;
 				break;
 			case DEPEVT_TRANSFER_BUS_EXPIRY:
@@ -313,7 +308,6 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 				 * give a hint to the gadget driver that this is
 				 * the case by returning -EAGAIN.
 				 */
-				dwc3_trace(trace_dwc3_gadget, "%s: bus expiry");
 				ret = -EAGAIN;
 				break;
 			default:
@@ -322,21 +316,14 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 
 			break;
 		}
+	} while (--timeout);
 
-		/*
-		 * We can't sleep here, because it is also called from
-		 * interrupt context.
-		 */
-		timeout--;
-		if (!timeout) {
-			dwc3_trace(trace_dwc3_gadget,
-					"Command Timed Out");
-			ret = -ETIMEDOUT;
-			break;
-		}
+	if (timeout == 0) {
+		ret = -ETIMEDOUT;
+		cmd_status = -ETIMEDOUT;
+	}
 
-		udelay(1);
-	} while (1);
+	trace_dwc3_gadget_ep_cmd(dep, cmd, params, cmd_status);
 
 	if (unlikely(susphy)) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -366,7 +353,7 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
 
 	memset(&params, 0, sizeof(params));
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	return dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 }
 
 static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep,
@@ -454,7 +441,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 	memset(&params, 0x00, sizeof(params));
 	cmd = DWC3_DEPCMD_DEPSTARTCFG;
 
-	ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	if (ret)
 		return ret;
 
@@ -475,10 +462,14 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore, bool restore)
+		bool modify, bool restore)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 
+	if (dev_WARN_ONCE(dwc->dev, modify && restore,
+					"Can't modify and restore\n"))
+		return -EINVAL;
+
 	memset(&params, 0x00, sizeof(params));
 
 	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
@@ -487,30 +478,22 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 	/* Burst size is only needed in SuperSpeed mode */
 	if (dwc->gadget.speed >= USB_SPEED_SUPER) {
 		u32 burst = dep->endpoint.maxburst;
-		u32 nump;
-		u32 reg;
-
-		/* update NumP */
-		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
-		nump = DWC3_DCFG_NUMP(reg);
-		nump = max(nump, burst);
-		reg &= ~DWC3_DCFG_NUMP_MASK;
-		reg |= nump << DWC3_DCFG_NUMP_SHIFT;
-		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
-
 		params.param0 |= DWC3_DEPCFG_BURST_SIZE(burst - 1);
 	}
 
-	if (ignore)
-		params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM;
-
-	if (restore) {
+	if (modify) {
+		params.param0 |= DWC3_DEPCFG_ACTION_MODIFY;
+	} else if (restore) {
 		params.param0 |= DWC3_DEPCFG_ACTION_RESTORE;
 		params.param2 |= dep->saved_state;
+	} else {
+		params.param0 |= DWC3_DEPCFG_ACTION_INIT;
 	}
 
-	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
-		| DWC3_DEPCFG_XFER_NOT_READY_EN;
+	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN;
+
+	if (dep->number <= 1 || usb_endpoint_xfer_isoc(desc))
+		params.param1 |= DWC3_DEPCFG_XFER_NOT_READY_EN;
 
 	if (usb_ss_max_streams(comp_desc) && usb_endpoint_xfer_bulk(desc)) {
 		params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
@@ -541,8 +524,7 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 		dep->interval = 1 << (desc->bInterval - 1);
 	}
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETEPCONFIG, &params);
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETEPCONFIG, &params);
 }
 
 static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
@@ -553,8 +535,8 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 
 	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 
-	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
+	return dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETTRANSFRESOURCE,
+			&params);
 }
 
 /**
@@ -567,7 +549,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		const struct usb_endpoint_descriptor *desc,
 		const struct usb_ss_ep_comp_descriptor *comp_desc,
-		bool ignore, bool restore)
+		bool modify, bool restore)
 {
 	struct dwc3		*dwc = dep->dwc;
 	u32			reg;
@@ -581,7 +563,7 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 			return ret;
 	}
 
-	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore,
+	ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, modify,
 			restore);
 	if (ret)
 		return ret;
@@ -600,38 +582,24 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
 		dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
 		if (usb_endpoint_xfer_control(desc))
-			goto out;
+			return 0;
+
+		/* Initialize the TRB ring */
+		dep->trb_dequeue = 0;
+		dep->trb_enqueue = 0;
+		memset(dep->trb_pool, 0,
+		       sizeof(struct dwc3_trb) * DWC3_TRB_NUM);
 
 		/* Link TRB. The HWO bit is never reset */
 		trb_st_hw = &dep->trb_pool[0];
 
 		trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
-		memset(trb_link, 0, sizeof(*trb_link));
-
 		trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
 		trb_link->ctrl |= DWC3_TRBCTL_LINK_TRB;
 		trb_link->ctrl |= DWC3_TRB_CTRL_HWO;
 	}
 
-out:
-	switch (usb_endpoint_type(desc)) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* don't change name */
-		break;
-	case USB_ENDPOINT_XFER_ISOC:
-		strlcat(dep->name, "-isoc", sizeof(dep->name));
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		strlcat(dep->name, "-bulk", sizeof(dep->name));
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		strlcat(dep->name, "-int", sizeof(dep->name));
-		break;
-	default:
-		dev_err(dwc->dev, "invalid endpoint transfer type\n");
-	}
-
 	return 0;
 }
 
@@ -640,15 +608,13 @@ static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep)
 {
 	struct dwc3_request		*req;
 
-	if (!list_empty(&dep->started_list)) {
-		dwc3_stop_active_transfer(dwc, dep->number, true);
+	dwc3_stop_active_transfer(dwc, dep->number, true);
 
-		/* - giveback all requests to gadget driver */
-		while (!list_empty(&dep->started_list)) {
-			req = next_request(&dep->started_list);
+	/* - giveback all requests to gadget driver */
+	while (!list_empty(&dep->started_list)) {
+		req = next_request(&dep->started_list);
 
-			dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
-		}
+		dwc3_gadget_giveback(dep, req, -ESHUTDOWN);
 	}
 
 	while (!list_empty(&dep->pending_list)) {
@@ -689,10 +655,6 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 	dep->type = 0;
 	dep->flags = 0;
 
-	snprintf(dep->name, sizeof(dep->name), "ep%d%s",
-			dep->number >> 1,
-			(dep->number & 1) ? "in" : "out");
-
 	return 0;
 }
 
@@ -784,6 +746,8 @@ static struct usb_request *dwc3_gadget_ep_alloc_request(struct usb_ep *ep,
 	req->epnum	= dep->number;
 	req->dep	= dep;
 
+	dep->allocated_requests++;
+
 	trace_dwc3_alloc_request(req);
 
 	return &req->request;
@@ -793,7 +757,9 @@ static void dwc3_gadget_ep_free_request(struct usb_ep *ep,
 		struct usb_request *request)
 {
 	struct dwc3_request		*req = to_dwc3_request(request);
+	struct dwc3_ep			*dep = to_dwc3_ep(ep);
 
+	dep->allocated_requests--;
 	trace_dwc3_free_request(req);
 	kfree(req);
 }
@@ -825,9 +791,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	}
 
 	dwc3_ep_inc_enq(dep);
-	/* Skip the LINK-TRB */
-	if (dwc3_ep_is_last_trb(dep->trb_enqueue))
-		dwc3_ep_inc_enq(dep);
 
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
 	trb->bpl = lower_32_bits(dma);
@@ -877,137 +840,169 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 
 	trb->ctrl |= DWC3_TRB_CTRL_HWO;
 
+	dep->queued_requests++;
+
 	trace_dwc3_prepare_trb(dep, trb);
 }
 
-/*
- * dwc3_prepare_trbs - setup TRBs from requests
- * @dep: endpoint for which requests are being prepared
- * @starting: true if the endpoint is idle and no requests are queued.
+/**
+ * dwc3_ep_prev_trb() - Returns the previous TRB in the ring
+ * @dep: The endpoint with the TRB ring
+ * @index: The index of the current TRB in the ring
  *
- * The function goes through the requests list and sets up TRBs for the
- * transfers. The function returns once there are no more TRBs available or
- * it runs out of requests.
+ * Returns the TRB prior to the one pointed to by the index. If the
+ * index is 0, we will wrap backwards, skip the link TRB, and return
+ * the one just before that.
  */
-static void dwc3_prepare_trbs(struct dwc3_ep *dep, bool starting)
+static struct dwc3_trb *dwc3_ep_prev_trb(struct dwc3_ep *dep, u8 index)
 {
-	struct dwc3_request	*req, *n;
-	u32			trbs_left;
-	unsigned int		last_one = 0;
+	if (!index)
+		index = DWC3_TRB_NUM - 2;
+	else
+		index = dep->trb_enqueue - 1;
 
-	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+	return &dep->trb_pool[index];
+}
 
-	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
+static u32 dwc3_calc_trbs_left(struct dwc3_ep *dep)
+{
+	struct dwc3_trb		*tmp;
+	u8			trbs_left;
 
 	/*
-	 * If enqueue & dequeue are equal than it is either full or empty. If we
-	 * are starting to process requests then we are empty. Otherwise we are
-	 * full and don't do anything
+	 * If enqueue & dequeue are equal than it is either full or empty.
+	 *
+	 * One way to know for sure is if the TRB right before us has HWO bit
+	 * set or not. If it has, then we're definitely full and can't fit any
+	 * more transfers in our ring.
 	 */
-	if (!trbs_left) {
-		if (!starting)
-			return;
+	if (dep->trb_enqueue == dep->trb_dequeue) {
+		tmp = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
+		if (tmp->ctrl & DWC3_TRB_CTRL_HWO)
+			return 0;
 
-		trbs_left = DWC3_TRB_NUM;
+		return DWC3_TRB_NUM - 1;
 	}
 
-	/* The last TRB is a link TRB, not used for xfer */
-	if (trbs_left <= 1)
-		return;
+	trbs_left = dep->trb_dequeue - dep->trb_enqueue;
+	trbs_left &= (DWC3_TRB_NUM - 1);
 
-	list_for_each_entry_safe(req, n, &dep->pending_list, list) {
-		unsigned	length;
-		dma_addr_t	dma;
-		last_one = false;
-
-		if (req->request.num_mapped_sgs > 0) {
-			struct usb_request *request = &req->request;
-			struct scatterlist *sg = request->sg;
-			struct scatterlist *s;
-			int		i;
-
-			for_each_sg(sg, s, request->num_mapped_sgs, i) {
-				unsigned chain = true;
-
-				length = sg_dma_len(s);
-				dma = sg_dma_address(s);
-
-				if (i == (request->num_mapped_sgs - 1) ||
-						sg_is_last(s)) {
-					if (list_empty(&dep->pending_list))
-						last_one = true;
-					chain = false;
-				}
+	if (dep->trb_dequeue < dep->trb_enqueue)
+		trbs_left--;
 
-				trbs_left--;
-				if (!trbs_left)
-					last_one = true;
+	return trbs_left;
+}
 
-				if (last_one)
-					chain = false;
+static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trbs_left,
+		unsigned int more_coming)
+{
+	struct usb_request *request = &req->request;
+	struct scatterlist *sg = request->sg;
+	struct scatterlist *s;
+	unsigned int	last = false;
+	unsigned int	length;
+	dma_addr_t	dma;
+	int		i;
 
-				dwc3_prepare_one_trb(dep, req, dma, length,
-						last_one, chain, i);
+	for_each_sg(sg, s, request->num_mapped_sgs, i) {
+		unsigned chain = true;
 
-				if (last_one)
-					break;
-			}
+		length = sg_dma_len(s);
+		dma = sg_dma_address(s);
 
-			if (last_one)
-				break;
-		} else {
-			dma = req->request.dma;
-			length = req->request.length;
-			trbs_left--;
+		if (sg_is_last(s)) {
+			if (usb_endpoint_xfer_int(dep->endpoint.desc) ||
+				!more_coming)
+				last = true;
 
-			if (!trbs_left)
-				last_one = 1;
+			chain = false;
+		}
 
-			/* Is this the last request? */
-			if (list_is_last(&req->list, &dep->pending_list))
-				last_one = 1;
+		if (!trbs_left--)
+			last = true;
 
-			dwc3_prepare_one_trb(dep, req, dma, length,
-					last_one, false, 0);
+		if (last)
+			chain = false;
 
-			if (last_one)
-				break;
-		}
+		dwc3_prepare_one_trb(dep, req, dma, length,
+				last, chain, i);
+
+		if (last)
+			break;
 	}
 }
 
-static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
-		int start_new)
+static void dwc3_prepare_one_trb_linear(struct dwc3_ep *dep,
+		struct dwc3_request *req, unsigned int trbs_left,
+		unsigned int more_coming)
+{
+	unsigned int	last = false;
+	unsigned int	length;
+	dma_addr_t	dma;
+
+	dma = req->request.dma;
+	length = req->request.length;
+
+	if (!trbs_left)
+		last = true;
+
+	/* Is this the last request? */
+	if (usb_endpoint_xfer_int(dep->endpoint.desc) || !more_coming)
+		last = true;
+
+	dwc3_prepare_one_trb(dep, req, dma, length,
+			last, false, 0);
+}
+
+/*
+ * dwc3_prepare_trbs - setup TRBs from requests
+ * @dep: endpoint for which requests are being prepared
+ *
+ * The function goes through the requests list and sets up TRBs for the
+ * transfers. The function returns once there are no more TRBs available or
+ * it runs out of requests.
+ */
+static void dwc3_prepare_trbs(struct dwc3_ep *dep)
+{
+	struct dwc3_request	*req, *n;
+	unsigned int		more_coming;
+	u32			trbs_left;
+
+	BUILD_BUG_ON_NOT_POWER_OF_2(DWC3_TRB_NUM);
+
+	trbs_left = dwc3_calc_trbs_left(dep);
+	if (!trbs_left)
+		return;
+
+	more_coming = dep->allocated_requests - dep->queued_requests;
+
+	list_for_each_entry_safe(req, n, &dep->pending_list, list) {
+		if (req->request.num_mapped_sgs > 0)
+			dwc3_prepare_one_trb_sg(dep, req, trbs_left--,
+					more_coming);
+		else
+			dwc3_prepare_one_trb_linear(dep, req, trbs_left--,
+					more_coming);
+
+		if (!trbs_left)
+			return;
+	}
+}
+
+static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param)
 {
 	struct dwc3_gadget_ep_cmd_params params;
 	struct dwc3_request		*req;
 	struct dwc3			*dwc = dep->dwc;
+	int				starting;
 	int				ret;
 	u32				cmd;
 
-	if (start_new && (dep->flags & DWC3_EP_BUSY)) {
-		dwc3_trace(trace_dwc3_gadget, "%s: endpoint busy", dep->name);
-		return -EBUSY;
-	}
-
-	/*
-	 * If we are getting here after a short-out-packet we don't enqueue any
-	 * new requests as we try to set the IOC bit only on the last request.
-	 */
-	if (start_new) {
-		if (list_empty(&dep->started_list))
-			dwc3_prepare_trbs(dep, start_new);
-
-		/* req points to the first request which will be sent */
-		req = next_request(&dep->started_list);
-	} else {
-		dwc3_prepare_trbs(dep, start_new);
+	starting = !(dep->flags & DWC3_EP_BUSY);
 
-		/*
-		 * req points to the first request where HWO changed from 0 to 1
-		 */
-		req = next_request(&dep->started_list);
-	}
+	dwc3_prepare_trbs(dep);
+	req = next_request(&dep->started_list);
 	if (!req) {
 		dep->flags |= DWC3_EP_PENDING_REQUEST;
 		return 0;
@@ -1015,16 +1010,17 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 
 	memset(&params, 0, sizeof(params));
 
-	if (start_new) {
+	if (starting) {
 		params.param0 = upper_32_bits(req->trb_dma);
 		params.param1 = lower_32_bits(req->trb_dma);
-		cmd = DWC3_DEPCMD_STARTTRANSFER;
+		cmd = DWC3_DEPCMD_STARTTRANSFER |
+			DWC3_DEPCMD_PARAM(cmd_param);
 	} else {
-		cmd = DWC3_DEPCMD_UPDATETRANSFER;
+		cmd = DWC3_DEPCMD_UPDATETRANSFER |
+			DWC3_DEPCMD_PARAM(dep->resource_index);
 	}
 
-	cmd |= DWC3_DEPCMD_PARAM(cmd_param);
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	if (ret < 0) {
 		/*
 		 * FIXME we need to iterate over the list of requests
@@ -1039,9 +1035,8 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 
 	dep->flags |= DWC3_EP_BUSY;
 
-	if (start_new) {
-		dep->resource_index = dwc3_gadget_ep_get_transfer_index(dwc,
-				dep->number);
+	if (starting) {
+		dep->resource_index = dwc3_gadget_ep_get_transfer_index(dep);
 		WARN_ON_ONCE(!dep->resource_index);
 	}
 
@@ -1064,7 +1059,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc,
 	/* 4 micro frames in the future */
 	uf = cur_uf + dep->interval * 4;
 
-	__dwc3_gadget_kick_transfer(dep, uf, 1);
+	__dwc3_gadget_kick_transfer(dep, uf);
 }
 
 static void dwc3_gadget_start_isoc(struct dwc3 *dwc,
@@ -1085,18 +1080,20 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 
 	if (!dep->endpoint.desc) {
 		dwc3_trace(trace_dwc3_gadget,
-				"trying to queue request %p to disabled %s\n",
+				"trying to queue request %p to disabled %s",
 				&req->request, dep->endpoint.name);
 		return -ESHUTDOWN;
 	}
 
 	if (WARN(req->dep != dep, "request %p belongs to '%s'\n",
 				&req->request, req->dep->name)) {
-		dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'\n",
+		dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'",
 				&req->request, req->dep->name);
 		return -EINVAL;
 	}
 
+	pm_runtime_get(dwc->dev);
+
 	req->request.actual	= 0;
 	req->request.status	= -EINPROGRESS;
 	req->direction		= dep->direction;
@@ -1131,9 +1128,8 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	 * little bit faster.
 	 */
 	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
-			!usb_endpoint_xfer_int(dep->endpoint.desc) &&
-			!(dep->flags & DWC3_EP_BUSY)) {
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+			!usb_endpoint_xfer_int(dep->endpoint.desc)) {
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		goto out;
 	}
 
@@ -1163,7 +1159,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 			return 0;
 		}
 
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		if (!ret)
 			dep->flags &= ~DWC3_EP_PENDING_REQUEST;
 
@@ -1179,8 +1175,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 			(dep->flags & DWC3_EP_BUSY) &&
 			!(dep->flags & DWC3_EP_MISSED_ISOC)) {
 		WARN_ON_ONCE(!dep->resource_index);
-		ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index,
-				false);
+		ret = __dwc3_gadget_kick_transfer(dep, dep->resource_index);
 		goto out;
 	}
 
@@ -1190,12 +1185,12 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
 	 * handled.
 	 */
 	if (dep->stream_capable)
-		ret = __dwc3_gadget_kick_transfer(dep, 0, true);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 
 out:
 	if (ret && ret != -EBUSY)
 		dwc3_trace(trace_dwc3_gadget,
-				"%s: failed to kick transfers\n",
+				"%s: failed to kick transfers",
 				dep->name);
 	if (ret == -EBUSY)
 		ret = 0;
@@ -1215,7 +1210,7 @@ static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep)
 	struct usb_request		*request;
 	struct usb_ep			*ep = &dep->endpoint;
 
-	dwc3_trace(trace_dwc3_gadget, "queueing ZLP\n");
+	dwc3_trace(trace_dwc3_gadget, "queueing ZLP");
 	request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
 	if (!request)
 		return -ENOMEM;
@@ -1319,23 +1314,36 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
 	memset(&params, 0x00, sizeof(params));
 
 	if (value) {
-		if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
-				(!list_empty(&dep->started_list) ||
-				 !list_empty(&dep->pending_list)))) {
+		struct dwc3_trb *trb;
+
+		unsigned transfer_in_flight;
+		unsigned started;
+
+		if (dep->number > 1)
+			trb = dwc3_ep_prev_trb(dep, dep->trb_enqueue);
+		else
+			trb = &dwc->ep0_trb[dep->trb_enqueue];
+
+		transfer_in_flight = trb->ctrl & DWC3_TRB_CTRL_HWO;
+		started = !list_empty(&dep->started_list);
+
+		if (!protocol && ((dep->direction && transfer_in_flight) ||
+				(!dep->direction && started))) {
 			dwc3_trace(trace_dwc3_gadget,
 					"%s: pending request, cannot halt",
 					dep->name);
 			return -EAGAIN;
 		}
 
-		ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
-			DWC3_DEPCMD_SETSTALL, &params);
+		ret = dwc3_send_gadget_ep_cmd(dep, DWC3_DEPCMD_SETSTALL,
+				&params);
 		if (ret)
 			dev_err(dwc->dev, "failed to set STALL on %s\n",
 					dep->name);
 		else
 			dep->flags |= DWC3_EP_STALL;
 	} else {
+
 		ret = dwc3_send_clear_stall_ep_cmd(dep);
 		if (ret)
 			dev_err(dwc->dev, "failed to clear STALL on %s\n",
@@ -1444,8 +1452,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	speed = reg & DWC3_DSTS_CONNECTSPD;
 	if ((speed == DWC3_DSTS_SUPERSPEED) ||
 	    (speed == DWC3_DSTS_SUPERSPEED_PLUS)) {
-		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed\n");
-		return -EINVAL;
+		dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed");
+		return 0;
 	}
 
 	link_state = DWC3_DSTS_USBLNKST(reg);
@@ -1456,7 +1464,7 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 		break;
 	default:
 		dwc3_trace(trace_dwc3_gadget,
-				"can't wakeup from '%s'\n",
+				"can't wakeup from '%s'",
 				dwc3_gadget_link_string(link_state));
 		return -EINVAL;
 	}
@@ -1525,6 +1533,9 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 	u32			reg;
 	u32			timeout = 500;
 
+	if (pm_runtime_suspended(dwc->dev))
+		return 0;
+
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	if (is_on) {
 		if (dwc->revision <= DWC3_REVISION_187A) {
@@ -1553,18 +1564,11 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend)
 
 	do {
 		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
-		if (is_on) {
-			if (!(reg & DWC3_DSTS_DEVCTRLHLT))
-				break;
-		} else {
-			if (reg & DWC3_DSTS_DEVCTRLHLT)
-				break;
-		}
-		timeout--;
-		if (!timeout)
-			return -ETIMEDOUT;
-		udelay(1);
-	} while (1);
+		reg &= DWC3_DSTS_DEVCTRLHLT;
+	} while (--timeout && !(!is_on ^ !reg));
+
+	if (!timeout)
+		return -ETIMEDOUT;
 
 	dwc3_trace(trace_dwc3_gadget, "gadget %s data soft-%s",
 			dwc->gadget_driver
@@ -1616,36 +1620,52 @@ static void dwc3_gadget_disable_irq(struct dwc3 *dwc)
 static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
 static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);
 
-static int dwc3_gadget_start(struct usb_gadget *g,
-		struct usb_gadget_driver *driver)
+/**
+ * dwc3_gadget_setup_nump - Calculate and initialize NUMP field of DCFG
+ * dwc: pointer to our context structure
+ *
+ * The following looks like complex but it's actually very simple. In order to
+ * calculate the number of packets we can burst at once on OUT transfers, we're
+ * gonna use RxFIFO size.
+ *
+ * To calculate RxFIFO size we need two numbers:
+ * MDWIDTH = size, in bits, of the internal memory bus
+ * RAM2_DEPTH = depth, in MDWIDTH, of internal RAM2 (where RxFIFO sits)
+ *
+ * Given these two numbers, the formula is simple:
+ *
+ * RxFIFO Size = (RAM2_DEPTH * MDWIDTH / 8) - 24 - 16;
+ *
+ * 24 bytes is for 3x SETUP packets
+ * 16 bytes is a clock domain crossing tolerance
+ *
+ * Given RxFIFO Size, NUMP = RxFIFOSize / 1024;
+ */
+static void dwc3_gadget_setup_nump(struct dwc3 *dwc)
 {
-	struct dwc3		*dwc = gadget_to_dwc(g);
-	struct dwc3_ep		*dep;
-	unsigned long		flags;
-	int			ret = 0;
-	int			irq;
-	u32			reg;
+	u32 ram2_depth;
+	u32 mdwidth;
+	u32 nump;
+	u32 reg;
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
-			IRQF_SHARED, "dwc3", dwc->ev_buf);
-	if (ret) {
-		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
-				irq, ret);
-		goto err0;
-	}
+	ram2_depth = DWC3_GHWPARAMS7_RAM2_DEPTH(dwc->hwparams.hwparams7);
+	mdwidth = DWC3_GHWPARAMS0_MDWIDTH(dwc->hwparams.hwparams0);
 
-	spin_lock_irqsave(&dwc->lock, flags);
+	nump = ((ram2_depth * mdwidth / 8) - 24 - 16) / 1024;
+	nump = min_t(u32, nump, 16);
 
-	if (dwc->gadget_driver) {
-		dev_err(dwc->dev, "%s is already bound to %s\n",
-				dwc->gadget.name,
-				dwc->gadget_driver->driver.name);
-		ret = -EBUSY;
-		goto err1;
-	}
+	/* update NumP */
+	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	reg &= ~DWC3_DCFG_NUMP_MASK;
+	reg |= nump << DWC3_DCFG_NUMP_SHIFT;
+	dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+}
 
-	dwc->gadget_driver	= driver;
+static int __dwc3_gadget_start(struct dwc3 *dwc)
+{
+	struct dwc3_ep		*dep;
+	int			ret = 0;
+	u32			reg;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 	reg &= ~(DWC3_DCFG_SPEED_MASK);
@@ -1668,16 +1688,16 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	} else {
 		switch (dwc->maximum_speed) {
 		case USB_SPEED_LOW:
-			reg |= DWC3_DSTS_LOWSPEED;
+			reg |= DWC3_DCFG_LOWSPEED;
 			break;
 		case USB_SPEED_FULL:
-			reg |= DWC3_DSTS_FULLSPEED1;
+			reg |= DWC3_DCFG_FULLSPEED1;
 			break;
 		case USB_SPEED_HIGH:
-			reg |= DWC3_DSTS_HIGHSPEED;
+			reg |= DWC3_DCFG_HIGHSPEED;
 			break;
 		case USB_SPEED_SUPER_PLUS:
-			reg |= DWC3_DSTS_SUPERSPEED_PLUS;
+			reg |= DWC3_DCFG_SUPERSPEED_PLUS;
 			break;
 		default:
 			dev_err(dwc->dev, "invalid dwc->maximum_speed (%d)\n",
@@ -1701,6 +1721,8 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 	reg &= ~DWC3_GRXTHRCFG_PKTCNTSEL;
 	dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
 
+	dwc3_gadget_setup_nump(dwc);
+
 	/* Start with SuperSpeed Default */
 	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 
@@ -1709,7 +1731,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
-		goto err2;
+		goto err0;
 	}
 
 	dep = dwc->eps[1];
@@ -1717,7 +1739,7 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 			false);
 	if (ret) {
 		dev_err(dwc->dev, "failed to enable %s\n", dep->name);
-		goto err3;
+		goto err1;
 	}
 
 	/* begin to receive SETUP packets */
@@ -1726,43 +1748,79 @@ static int dwc3_gadget_start(struct usb_gadget *g,
 
 	dwc3_gadget_enable_irq(dwc);
 
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
 	return 0;
 
-err3:
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
-
-err2:
-	dwc->gadget_driver = NULL;
-
 err1:
-	spin_unlock_irqrestore(&dwc->lock, flags);
-
-	free_irq(irq, dwc->ev_buf);
+	__dwc3_gadget_ep_disable(dwc->eps[0]);
 
 err0:
 	return ret;
 }
 
-static int dwc3_gadget_stop(struct usb_gadget *g)
+static int dwc3_gadget_start(struct usb_gadget *g,
+		struct usb_gadget_driver *driver)
 {
 	struct dwc3		*dwc = gadget_to_dwc(g);
 	unsigned long		flags;
+	int			ret = 0;
 	int			irq;
 
+	irq = dwc->irq_gadget;
+	ret = request_threaded_irq(irq, dwc3_interrupt, dwc3_thread_interrupt,
+			IRQF_SHARED, "dwc3", dwc->ev_buf);
+	if (ret) {
+		dev_err(dwc->dev, "failed to request irq #%d --> %d\n",
+				irq, ret);
+		goto err0;
+	}
+
 	spin_lock_irqsave(&dwc->lock, flags);
+	if (dwc->gadget_driver) {
+		dev_err(dwc->dev, "%s is already bound to %s\n",
+				dwc->gadget.name,
+				dwc->gadget_driver->driver.name);
+		ret = -EBUSY;
+		goto err1;
+	}
+
+	dwc->gadget_driver	= driver;
+
+	if (pm_runtime_active(dwc->dev))
+		__dwc3_gadget_start(dwc);
+
+	spin_unlock_irqrestore(&dwc->lock, flags);
+
+	return 0;
+
+err1:
+	spin_unlock_irqrestore(&dwc->lock, flags);
+	free_irq(irq, dwc);
+
+err0:
+	return ret;
+}
+
+static void __dwc3_gadget_stop(struct dwc3 *dwc)
+{
+	if (pm_runtime_suspended(dwc->dev))
+		return;
 
 	dwc3_gadget_disable_irq(dwc);
 	__dwc3_gadget_ep_disable(dwc->eps[0]);
 	__dwc3_gadget_ep_disable(dwc->eps[1]);
+}
 
-	dwc->gadget_driver	= NULL;
+static int dwc3_gadget_stop(struct usb_gadget *g)
+{
+	struct dwc3		*dwc = gadget_to_dwc(g);
+	unsigned long		flags;
 
+	spin_lock_irqsave(&dwc->lock, flags);
+	__dwc3_gadget_stop(dwc);
+	dwc->gadget_driver	= NULL;
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
-	irq = platform_get_irq(to_platform_device(dwc->dev), 0);
-	free_irq(irq, dwc->ev_buf);
+	free_irq(dwc->irq_gadget, dwc->ev_buf);
 
 	return 0;
 }
@@ -1785,7 +1843,7 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 	u8				i;
 
 	for (i = 0; i < num; i++) {
-		u8 epnum = (i << 1) | (!!direction);
+		u8 epnum = (i << 1) | (direction ? 1 : 0);
 
 		dep = kzalloc(sizeof(*dep), GFP_KERNEL);
 		if (!dep)
@@ -1794,12 +1852,14 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc,
 		dep->dwc = dwc;
 		dep->number = epnum;
 		dep->direction = !!direction;
+		dep->regs = dwc->regs + DWC3_DEP_BASE(epnum);
 		dwc->eps[epnum] = dep;
 
 		snprintf(dep->name, sizeof(dep->name), "ep%d%s", epnum >> 1,
 				(epnum & 1) ? "in" : "out");
 
 		dep->endpoint.name = dep->name;
+		spin_lock_init(&dep->lock);
 
 		dwc3_trace(trace_dwc3_gadget, "initializing %s", dep->name);
 
@@ -1901,6 +1961,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	unsigned int		s_pkt = 0;
 	unsigned int		trb_status;
 
+	dep->queued_requests--;
 	trace_dwc3_complete_trb(dep, trb);
 
 	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
@@ -1921,7 +1982,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 			trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size);
 			if (trb_status == DWC3_TRBSTS_MISSED_ISOC) {
 				dwc3_trace(trace_dwc3_gadget,
-						"%s: incomplete IN transfer\n",
+						"%s: incomplete IN transfer",
 						dep->name);
 				/*
 				 * If missed isoc occurred and there is
@@ -2006,6 +2067,14 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 			break;
 	} while (1);
 
+	/*
+	 * Our endpoint might get disabled by another thread during
+	 * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+	 * early on so DWC3_EP_BUSY flag gets cleared
+	 */
+	if (!dep->endpoint.desc)
+		return 1;
+
 	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
 			list_empty(&dep->started_list)) {
 		if (list_empty(&dep->pending_list)) {
@@ -2023,6 +2092,10 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		return 1;
 	}
 
+	if (usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		if ((event->status & DEPEVT_STATUS_IOC) &&
+				(trb->ctrl & DWC3_TRB_CTRL_IOC))
+			return 0;
 	return 1;
 }
 
@@ -2039,7 +2112,7 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
 		status = -ECONNRESET;
 
 	clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
-	if (clean_busy && (is_xfer_complete ||
+	if (clean_busy && (!dep->endpoint.desc || is_xfer_complete ||
 				usb_endpoint_xfer_isoc(dep->endpoint.desc)))
 		dep->flags &= ~DWC3_EP_BUSY;
 
@@ -2068,10 +2141,18 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
 		dwc->u1u2 = 0;
 	}
 
+	/*
+	 * Our endpoint might get disabled by another thread during
+	 * dwc3_gadget_giveback(). If that happens, we're just gonna return 1
+	 * early on so DWC3_EP_BUSY flag gets cleared
+	 */
+	if (!dep->endpoint.desc)
+		return;
+
 	if (!usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 		int ret;
 
-		ret = __dwc3_gadget_kick_transfer(dep, 0, is_xfer_complete);
+		ret = __dwc3_gadget_kick_transfer(dep, 0);
 		if (!ret || ret == -EBUSY)
 			return;
 	}
@@ -2099,7 +2180,7 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 
 		if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
 			dwc3_trace(trace_dwc3_gadget,
-					"%s is an Isochronous endpoint\n",
+					"%s is an Isochronous endpoint",
 					dep->name);
 			return;
 		}
@@ -2122,12 +2203,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 					dep->name, active ? "Transfer Active"
 					: "Transfer Not Active");
 
-			ret = __dwc3_gadget_kick_transfer(dep, 0, !active);
+			ret = __dwc3_gadget_kick_transfer(dep, 0);
 			if (!ret || ret == -EBUSY)
 				return;
 
 			dwc3_trace(trace_dwc3_gadget,
-					"%s: failed to kick transfers\n",
+					"%s: failed to kick transfers",
 					dep->name);
 		}
 
@@ -2150,11 +2231,11 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc,
 			/* FALLTHROUGH */
 		default:
 			dwc3_trace(trace_dwc3_gadget,
-					"unable to find suitable stream\n");
+					"unable to find suitable stream");
 		}
 		break;
 	case DWC3_DEPEVT_RXTXFIFOEVT:
-		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun\n", dep->name);
+		dwc3_trace(trace_dwc3_gadget, "%s FIFO Overrun", dep->name);
 		break;
 	case DWC3_DEPEVT_EPCMDCMPLT:
 		dwc3_trace(trace_dwc3_gadget, "Endpoint Command Complete");
@@ -2237,7 +2318,7 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force)
 	cmd |= DWC3_DEPCMD_CMDIOC;
 	cmd |= DWC3_DEPCMD_PARAM(dep->resource_index);
 	memset(&params, 0, sizeof(params));
-	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, &params);
+	ret = dwc3_send_gadget_ep_cmd(dep, cmd, &params);
 	WARN_ON_ONCE(ret);
 	dep->resource_index = 0;
 	dep->flags &= ~DWC3_EP_BUSY;
@@ -2300,12 +2381,16 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
 	dwc->gadget.speed = USB_SPEED_UNKNOWN;
 	dwc->setup_packet_pending = false;
 	usb_gadget_set_state(&dwc->gadget, USB_STATE_NOTATTACHED);
+
+	dwc->connected = false;
 }
 
 static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
+	dwc->connected = true;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
@@ -2393,12 +2478,12 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	dwc3_update_ram_clk_sel(dwc, speed);
 
 	switch (speed) {
-	case DWC3_DCFG_SUPERSPEED_PLUS:
+	case DWC3_DSTS_SUPERSPEED_PLUS:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
 		break;
-	case DWC3_DCFG_SUPERSPEED:
+	case DWC3_DSTS_SUPERSPEED:
 		/*
 		 * WORKAROUND: DWC3 revisions <1.90a have an issue which
 		 * would cause a missing USB3 Reset event.
@@ -2419,18 +2504,18 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		dwc->gadget.ep0->maxpacket = 512;
 		dwc->gadget.speed = USB_SPEED_SUPER;
 		break;
-	case DWC3_DCFG_HIGHSPEED:
+	case DWC3_DSTS_HIGHSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_HIGH;
 		break;
-	case DWC3_DCFG_FULLSPEED2:
-	case DWC3_DCFG_FULLSPEED1:
+	case DWC3_DSTS_FULLSPEED2:
+	case DWC3_DSTS_FULLSPEED1:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
 		dwc->gadget.ep0->maxpacket = 64;
 		dwc->gadget.speed = USB_SPEED_FULL;
 		break;
-	case DWC3_DCFG_LOWSPEED:
+	case DWC3_DSTS_LOWSPEED:
 		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
 		dwc->gadget.ep0->maxpacket = 8;
 		dwc->gadget.speed = USB_SPEED_LOW;
@@ -2440,8 +2525,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 	/* Enable USB2 LPM Capability */
 
 	if ((dwc->revision > DWC3_REVISION_194A) &&
-	    (speed != DWC3_DCFG_SUPERSPEED) &&
-	    (speed != DWC3_DCFG_SUPERSPEED_PLUS)) {
+	    (speed != DWC3_DSTS_SUPERSPEED) &&
+	    (speed != DWC3_DSTS_SUPERSPEED_PLUS)) {
 		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
 		reg |= DWC3_DCFG_LPM_CAP;
 		dwc3_writel(dwc->regs, DWC3_DCFG, reg);
@@ -2610,6 +2695,17 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc,
 	dwc->link_state = next;
 }
 
+static void dwc3_gadget_suspend_interrupt(struct dwc3 *dwc,
+					  unsigned int evtinfo)
+{
+	enum dwc3_link_state next = evtinfo & DWC3_LINK_STATE_MASK;
+
+	if (dwc->link_state != next && next == DWC3_LINK_STATE_U3)
+		dwc3_suspend_gadget(dwc);
+
+	dwc->link_state = next;
+}
+
 static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
 		unsigned int evtinfo)
 {
@@ -2661,7 +2757,20 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc,
 		dwc3_gadget_linksts_change_interrupt(dwc, event->event_info);
 		break;
 	case DWC3_DEVICE_EVENT_EOPF:
-		dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame");
+		/* It changed to be suspend event for version 2.30a and above */
+		if (dwc->revision < DWC3_REVISION_230A) {
+			dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame");
+		} else {
+			dwc3_trace(trace_dwc3_gadget, "U3/L1-L2 Suspend Event");
+
+			/*
+			 * Ignore suspend event until the gadget enters into
+			 * USB_STATE_CONFIGURED state.
+			 */
+			if (dwc->gadget.state >= USB_STATE_CONFIGURED)
+				dwc3_gadget_suspend_interrupt(dwc,
+						event->event_info);
+		}
 		break;
 	case DWC3_DEVICE_EVENT_SOF:
 		dwc3_trace(trace_dwc3_gadget, "Start of Periodic Frame");
@@ -2767,6 +2876,13 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
 	u32 count;
 	u32 reg;
 
+	if (pm_runtime_suspended(dwc->dev)) {
+		pm_runtime_get(dwc->dev);
+		disable_irq_nosync(dwc->irq_gadget);
+		dwc->pending_events = true;
+		return IRQ_HANDLED;
+	}
+
 	count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
 	count &= DWC3_GEVNTCOUNT_MASK;
 	if (!count)
@@ -2798,7 +2914,33 @@ static irqreturn_t dwc3_interrupt(int irq, void *_evt)
  */
 int dwc3_gadget_init(struct dwc3 *dwc)
 {
-	int					ret;
+	int ret, irq;
+	struct platform_device *dwc3_pdev = to_platform_device(dwc->dev);
+
+	irq = platform_get_irq_byname(dwc3_pdev, "peripheral");
+	if (irq == -EPROBE_DEFER)
+		return irq;
+
+	if (irq <= 0) {
+		irq = platform_get_irq_byname(dwc3_pdev, "dwc_usb3");
+		if (irq == -EPROBE_DEFER)
+			return irq;
+
+		if (irq <= 0) {
+			irq = platform_get_irq(dwc3_pdev, 0);
+			if (irq <= 0) {
+				if (irq != -EPROBE_DEFER) {
+					dev_err(dwc->dev,
+						"missing peripheral IRQ\n");
+				}
+				if (!irq)
+					irq = -EINVAL;
+				return irq;
+			}
+		}
+	}
+
+	dwc->irq_gadget = irq;
 
 	dwc->ctrl_req = dma_alloc_coherent(dwc->dev, sizeof(*dwc->ctrl_req),
 			&dwc->ctrl_req_addr, GFP_KERNEL);
@@ -2861,7 +3003,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
 	 */
 	if (dwc->revision < DWC3_REVISION_220A)
 		dwc3_trace(trace_dwc3_gadget,
-				"Changing max_speed on rev %08x\n",
+				"Changing max_speed on rev %08x",
 				dwc->revision);
 
 	dwc->gadget.max_speed		= dwc->maximum_speed;
@@ -2935,61 +3077,50 @@ void dwc3_gadget_exit(struct dwc3 *dwc)
 
 int dwc3_gadget_suspend(struct dwc3 *dwc)
 {
+	int ret;
+
 	if (!dwc->gadget_driver)
 		return 0;
 
-	if (dwc->pullups_connected) {
-		dwc3_gadget_disable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true, true);
-	}
-
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
-	__dwc3_gadget_ep_disable(dwc->eps[1]);
+	ret = dwc3_gadget_run_stop(dwc, false, false);
+	if (ret < 0)
+		return ret;
 
-	dwc->dcfg = dwc3_readl(dwc->regs, DWC3_DCFG);
+	dwc3_disconnect_gadget(dwc);
+	__dwc3_gadget_stop(dwc);
 
 	return 0;
 }
 
 int dwc3_gadget_resume(struct dwc3 *dwc)
 {
-	struct dwc3_ep		*dep;
 	int			ret;
 
 	if (!dwc->gadget_driver)
 		return 0;
 
-	/* Start with SuperSpeed Default */
-	dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
-
-	dep = dwc->eps[0];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
-			false);
-	if (ret)
+	ret = __dwc3_gadget_start(dwc);
+	if (ret < 0)
 		goto err0;
 
-	dep = dwc->eps[1];
-	ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false,
-			false);
-	if (ret)
+	ret = dwc3_gadget_run_stop(dwc, true, false);
+	if (ret < 0)
 		goto err1;
 
-	/* begin to receive SETUP packets */
-	dwc->ep0state = EP0_SETUP_PHASE;
-	dwc3_ep0_out_start(dwc);
-
-	dwc3_writel(dwc->regs, DWC3_DCFG, dwc->dcfg);
-
-	if (dwc->pullups_connected) {
-		dwc3_gadget_enable_irq(dwc);
-		dwc3_gadget_run_stop(dwc, true, false);
-	}
-
 	return 0;
 
 err1:
-	__dwc3_gadget_ep_disable(dwc->eps[0]);
+	__dwc3_gadget_stop(dwc);
 
 err0:
 	return ret;
 }
+
+void dwc3_gadget_process_pending_events(struct dwc3 *dwc)
+{
+	if (dwc->pending_events) {
+		dwc3_interrupt(dwc->irq_gadget, dwc->ev_buf);
+		dwc->pending_events = false;
+		enable_irq(dwc->irq_gadget);
+	}
+}

drivers/usb/dwc3/gadget.h

@@ -95,11 +95,11 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
  *
  * Caller should take care of locking
  */
-static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3 *dwc, u8 number)
+static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
 {
 	u32			res_id;
 
-	res_id = dwc3_readl(dwc->regs, DWC3_DEPCMD(number));
+	res_id = dwc3_readl(dep->regs, DWC3_DEPCMD);
 
 	return DWC3_DEPCMD_GET_RSC_IDX(res_id);
 }

drivers/usb/dwc3/io.h

@@ -26,7 +26,6 @@
 
 static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 {
-	u32 offs = offset - DWC3_GLOBALS_REGS_START;
 	u32 value;
 
 	/*
@@ -34,7 +33,7 @@ static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	value = readl(base + offs);
+	value = readl(base + offset - DWC3_GLOBALS_REGS_START);
 
 	/*
 	 * When tracing we want to make it easy to find the correct address on
@@ -49,14 +48,12 @@ static inline u32 dwc3_readl(void __iomem *base, u32 offset)
 
 static inline void dwc3_writel(void __iomem *base, u32 offset, u32 value)
 {
-	u32 offs = offset - DWC3_GLOBALS_REGS_START;
-
 	/*
 	 * We requested the mem region starting from the Globals address
 	 * space, see dwc3_probe in core.c.
 	 * However, the offsets are given starting from xHCI address space.
 	 */
-	writel(value, base + offs);
+	writel(value, base + offset - DWC3_GLOBALS_REGS_START);
 
 	/*
 	 * When tracing we want to make it easy to find the correct address on

drivers/usb/dwc3/platform_data.h

@@ -1,53 +0,0 @@
-/**
- * platform_data.h - USB DWC3 Platform Data Support
- *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/otg.h>
-
-struct dwc3_platform_data {
-	enum usb_device_speed maximum_speed;
-	enum usb_dr_mode dr_mode;
-	bool usb3_lpm_capable;
-
-	unsigned is_utmi_l1_suspend:1;
-	u8 hird_threshold;
-
-	u8 lpm_nyet_threshold;
-
-	unsigned disable_scramble_quirk:1;
-	unsigned has_lpm_erratum:1;
-	unsigned u2exit_lfps_quirk:1;
-	unsigned u2ss_inp3_quirk:1;
-	unsigned req_p1p2p3_quirk:1;
-	unsigned del_p1p2p3_quirk:1;
-	unsigned del_phy_power_chg_quirk:1;
-	unsigned lfps_filter_quirk:1;
-	unsigned rx_detect_poll_quirk:1;
-	unsigned dis_u3_susphy_quirk:1;
-	unsigned dis_u2_susphy_quirk:1;
-	unsigned dis_enblslpm_quirk:1;
-	unsigned dis_rxdet_inp3_quirk:1;
-
-	unsigned tx_de_emphasis_quirk:1;
-	unsigned tx_de_emphasis:2;
-
-	u32 fladj_value;
-
-	const char *hsphy_interface;
-};

drivers/usb/dwc3/trace.h

@@ -71,7 +71,8 @@ DECLARE_EVENT_CLASS(dwc3_log_event,
 	TP_fast_assign(
 		__entry->event = event;
 	),
-	TP_printk("event %08x", __entry->event)
+	TP_printk("event (%08x): %s", __entry->event,
+			dwc3_decode_event(__entry->event))
 );
 
 DEFINE_EVENT(dwc3_log_event, dwc3_event,
@@ -85,21 +86,21 @@ DECLARE_EVENT_CLASS(dwc3_log_ctrl,
 	TP_STRUCT__entry(
 		__field(__u8, bRequestType)
 		__field(__u8, bRequest)
-		__field(__le16, wValue)
-		__field(__le16, wIndex)
-		__field(__le16, wLength)
+		__field(__u16, wValue)
+		__field(__u16, wIndex)
+		__field(__u16, wLength)
 	),
 	TP_fast_assign(
 		__entry->bRequestType = ctrl->bRequestType;
 		__entry->bRequest = ctrl->bRequest;
-		__entry->wValue = ctrl->wValue;
-		__entry->wIndex = ctrl->wIndex;
-		__entry->wLength = ctrl->wLength;
+		__entry->wValue = le16_to_cpu(ctrl->wValue);
+		__entry->wIndex = le16_to_cpu(ctrl->wIndex);
+		__entry->wLength = le16_to_cpu(ctrl->wLength);
 	),
 	TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
 		__entry->bRequestType, __entry->bRequest,
-		le16_to_cpu(__entry->wValue), le16_to_cpu(__entry->wIndex),
-		le16_to_cpu(__entry->wLength)
+		__entry->wValue, __entry->wIndex,
+		__entry->wLength
 	)
 );
 
@@ -166,37 +167,41 @@ DEFINE_EVENT(dwc3_log_request, dwc3_gadget_giveback,
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_generic_cmd,
-	TP_PROTO(unsigned int cmd, u32 param),
-	TP_ARGS(cmd, param),
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status),
 	TP_STRUCT__entry(
 		__field(unsigned int, cmd)
 		__field(u32, param)
+		__field(int, status)
 	),
 	TP_fast_assign(
 		__entry->cmd = cmd;
 		__entry->param = param;
+		__entry->status = status;
 	),
-	TP_printk("cmd '%s' [%d] param %08x",
+	TP_printk("cmd '%s' [%d] param %08x --> status: %s",
 		dwc3_gadget_generic_cmd_string(__entry->cmd),
-		__entry->cmd, __entry->param
+		__entry->cmd, __entry->param,
+		dwc3_gadget_generic_cmd_status_string(__entry->status)
 	)
 );
 
 DEFINE_EVENT(dwc3_log_generic_cmd, dwc3_gadget_generic_cmd,
-	TP_PROTO(unsigned int cmd, u32 param),
-	TP_ARGS(cmd, param)
+	TP_PROTO(unsigned int cmd, u32 param, int status),
+	TP_ARGS(cmd, param, status)
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
 	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
-		struct dwc3_gadget_ep_cmd_params *params),
-	TP_ARGS(dep, cmd, params),
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status),
 	TP_STRUCT__entry(
 		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(unsigned int, cmd)
 		__field(u32, param0)
 		__field(u32, param1)
 		__field(u32, param2)
+		__field(int, cmd_status)
 	),
 	TP_fast_assign(
 		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
@@ -204,18 +209,20 @@ DECLARE_EVENT_CLASS(dwc3_log_gadget_ep_cmd,
 		__entry->param0 = params->param0;
 		__entry->param1 = params->param1;
 		__entry->param2 = params->param2;
+		__entry->cmd_status = cmd_status;
 	),
-	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x",
+	TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s",
 		__get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
 		__entry->cmd, __entry->param0,
-		__entry->param1, __entry->param2
+		__entry->param1, __entry->param2,
+		dwc3_ep_cmd_status_string(__entry->cmd_status)
 	)
 );
 
 DEFINE_EVENT(dwc3_log_gadget_ep_cmd, dwc3_gadget_ep_cmd,
 	TP_PROTO(struct dwc3_ep *dep, unsigned int cmd,
-		struct dwc3_gadget_ep_cmd_params *params),
-	TP_ARGS(dep, cmd, params)
+		struct dwc3_gadget_ep_cmd_params *params, int cmd_status),
+	TP_ARGS(dep, cmd, params, cmd_status)
 );
 
 DECLARE_EVENT_CLASS(dwc3_log_trb,
@@ -224,6 +231,8 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 	TP_STRUCT__entry(
 		__dynamic_array(char, name, DWC3_MSG_MAX)
 		__field(struct dwc3_trb *, trb)
+		__field(u32, allocated)
+		__field(u32, queued)
 		__field(u32, bpl)
 		__field(u32, bph)
 		__field(u32, size)
@@ -232,14 +241,53 @@ DECLARE_EVENT_CLASS(dwc3_log_trb,
 	TP_fast_assign(
 		snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
 		__entry->trb = trb;
+		__entry->allocated = dep->allocated_requests;
+		__entry->queued = dep->queued_requests;
 		__entry->bpl = trb->bpl;
 		__entry->bph = trb->bph;
 		__entry->size = trb->size;
 		__entry->ctrl = trb->ctrl;
 	),
-	TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x",
-		__get_str(name), __entry->trb, __entry->bph, __entry->bpl,
-		__entry->size, __entry->ctrl
+	TP_printk("%s: %d/%d trb %p buf %08x%08x size %d ctrl %08x (%c%c%c%c:%c%c:%s)",
+		__get_str(name), __entry->queued, __entry->allocated,
+		__entry->trb, __entry->bph, __entry->bpl,
+		__entry->size, __entry->ctrl,
+		__entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h',
+		__entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l',
+		__entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c',
+		__entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's',
+		__entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c',
+		({char *s;
+		switch (__entry->ctrl & 0x3f0) {
+		case DWC3_TRBCTL_NORMAL:
+			s = "normal";
+			break;
+		case DWC3_TRBCTL_CONTROL_SETUP:
+			s = "setup";
+			break;
+		case DWC3_TRBCTL_CONTROL_STATUS2:
+			s = "status2";
+			break;
+		case DWC3_TRBCTL_CONTROL_STATUS3:
+			s = "status3";
+			break;
+		case DWC3_TRBCTL_CONTROL_DATA:
+			s = "data";
+			break;
+		case DWC3_TRBCTL_ISOCHRONOUS_FIRST:
+			s = "isoc-first";
+			break;
+		case DWC3_TRBCTL_ISOCHRONOUS:
+			s = "isoc";
+			break;
+		case DWC3_TRBCTL_LINK_TRB:
+			s = "link";
+			break;
+		default:
+			s = "UNKNOWN";
+			break;
+		} s; })
 	)
 );
 

drivers/usb/gadget/Kconfig

@@ -114,7 +114,7 @@ config USB_GADGET_VBUS_DRAW
 
 config USB_GADGET_STORAGE_NUM_BUFFERS
 	int "Number of storage pipeline buffers"
-	range 2 32
+	range 2 256
 	default 2
 	help
 	   Usually 2 buffers are enough to establish a good buffering

drivers/usb/gadget/config.c

@@ -93,7 +93,7 @@ int usb_gadget_config_buf(
 	*cp = *config;
 
 	/* then interface/endpoint/class/vendor/... */
-	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8 *)buf,
 			length - USB_DT_CONFIG_SIZE, desc);
 	if (len < 0)
 		return len;

drivers/usb/gadget/function/f_fs.c

@@ -130,6 +130,12 @@ struct ffs_epfile {
 
 	struct dentry			*dentry;
 
+	/*
+	 * Buffer for holding data from partial reads which may happen since
+	 * we’re rounding user read requests to a multiple of a max packet size.
+	 */
+	struct ffs_buffer		*read_buffer;	/* P: epfile->mutex */
+
 	char				name[5];
 
 	unsigned char			in;	/* P: ffs->eps_lock */
@@ -138,6 +144,12 @@ struct ffs_epfile {
 	unsigned char			_pad;
 };
 
+struct ffs_buffer {
+	size_t length;
+	char *data;
+	char storage[];
+};
+
 /*  ffs_io_data structure ***************************************************/
 
 struct ffs_io_data {
@@ -640,6 +652,49 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req)
 	}
 }
 
+static ssize_t ffs_copy_to_iter(void *data, int data_len, struct iov_iter *iter)
+{
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (likely(ret == data_len))
+		return ret;
+
+	if (unlikely(iov_iter_count(iter)))
+		return -EFAULT;
+
+	/*
+	 * Dear user space developer!
+	 *
+	 * TL;DR: To stop getting below error message in your kernel log, change
+	 * user space code using functionfs to align read buffers to a max
+	 * packet size.
+	 *
+	 * Some UDCs (e.g. dwc3) require request sizes to be a multiple of a max
+	 * packet size.  When unaligned buffer is passed to functionfs, it
+	 * internally uses a larger, aligned buffer so that such UDCs are happy.
+	 *
+	 * Unfortunately, this means that host may send more data than was
+	 * requested in read(2) system call.  f_fs doesn’t know what to do with
+	 * that excess data so it simply drops it.
+	 *
+	 * Was the buffer aligned in the first place, no such problem would
+	 * happen.
+	 *
+	 * Data may be dropped only in AIO reads.  Synchronous reads are handled
+	 * by splitting a request into multiple parts.  This splitting may still
+	 * be a problem though so it’s likely best to align the buffer
+	 * regardless of it being AIO or not..
+	 *
+	 * This only affects OUT endpoints, i.e. reading data with a read(2),
+	 * aio_read(2) etc. system calls.  Writing data to an IN endpoint is not
+	 * affected.
+	 */
+	pr_err("functionfs read size %d > requested size %zd, dropping excess data. "
+	       "Align read buffer size to max packet size to avoid the problem.\n",
+	       data_len, ret);
+
+	return ret;
+}
+
 static void ffs_user_copy_worker(struct work_struct *work)
 {
 	struct ffs_io_data *io_data = container_of(work, struct ffs_io_data,
@@ -650,9 +705,7 @@ static void ffs_user_copy_worker(struct work_struct *work)
 
 	if (io_data->read && ret > 0) {
 		use_mm(io_data->mm);
-		ret = copy_to_iter(io_data->buf, ret, &io_data->data);
-		if (ret != io_data->req->actual && iov_iter_count(&io_data->data))
-			ret = -EFAULT;
+		ret = ffs_copy_to_iter(io_data->buf, ret, &io_data->data);
 		unuse_mm(io_data->mm);
 	}
 
@@ -680,6 +733,58 @@ static void ffs_epfile_async_io_complete(struct usb_ep *_ep,
 	schedule_work(&io_data->work);
 }
 
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_buffered(struct ffs_epfile *epfile,
+					  struct iov_iter *iter)
+{
+	struct ffs_buffer *buf = epfile->read_buffer;
+	ssize_t ret;
+	if (!buf)
+		return 0;
+
+	ret = copy_to_iter(buf->data, buf->length, iter);
+	if (buf->length == ret) {
+		kfree(buf);
+		epfile->read_buffer = NULL;
+	} else if (unlikely(iov_iter_count(iter))) {
+		ret = -EFAULT;
+	} else {
+		buf->length -= ret;
+		buf->data += ret;
+	}
+	return ret;
+}
+
+/* Assumes epfile->mutex is held. */
+static ssize_t __ffs_epfile_read_data(struct ffs_epfile *epfile,
+				      void *data, int data_len,
+				      struct iov_iter *iter)
+{
+	struct ffs_buffer *buf;
+
+	ssize_t ret = copy_to_iter(data, data_len, iter);
+	if (likely(data_len == ret))
+		return ret;
+
+	if (unlikely(iov_iter_count(iter)))
+		return -EFAULT;
+
+	/* See ffs_copy_to_iter for more context. */
+	pr_warn("functionfs read size %d > requested size %zd, splitting request into multiple reads.",
+		data_len, ret);
+
+	data_len -= ret;
+	buf = kmalloc(sizeof(*buf) + data_len, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	buf->length = data_len;
+	buf->data = buf->storage;
+	memcpy(buf->storage, data + ret, data_len);
+	epfile->read_buffer = buf;
+
+	return ret;
+}
+
 static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 {
 	struct ffs_epfile *epfile = file->private_data;
@@ -709,21 +814,40 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 	if (halt && epfile->isoc)
 		return -EINVAL;
 
+	/* We will be using request and read_buffer */
+	ret = ffs_mutex_lock(&epfile->mutex, file->f_flags & O_NONBLOCK);
+	if (unlikely(ret))
+		goto error;
+
 	/* Allocate & copy */
 	if (!halt) {
+		struct usb_gadget *gadget;
+
+		/*
+		 * Do we have buffered data from previous partial read?  Check
+		 * that for synchronous case only because we do not have
+		 * facility to ‘wake up’ a pending asynchronous read and push
+		 * buffered data to it which we would need to make things behave
+		 * consistently.
+		 */
+		if (!io_data->aio && io_data->read) {
+			ret = __ffs_epfile_read_buffered(epfile, &io_data->data);
+			if (ret)
+				goto error_mutex;
+		}
+
 		/*
 		 * if we _do_ wait above, the epfile->ffs->gadget might be NULL
 		 * before the waiting completes, so do not assign to 'gadget'
 		 * earlier
 		 */
-		struct usb_gadget *gadget = epfile->ffs->gadget;
-		size_t copied;
+		gadget = epfile->ffs->gadget;
 
 		spin_lock_irq(&epfile->ffs->eps_lock);
 		/* In the meantime, endpoint got disabled or changed. */
 		if (epfile->ep != ep) {
-			spin_unlock_irq(&epfile->ffs->eps_lock);
-			return -ESHUTDOWN;
+			ret = -ESHUTDOWN;
+			goto error_lock;
 		}
 		data_len = iov_iter_count(&io_data->data);
 		/*
@@ -735,22 +859,17 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 		spin_unlock_irq(&epfile->ffs->eps_lock);
 
 		data = kmalloc(data_len, GFP_KERNEL);
-		if (unlikely(!data))
-			return -ENOMEM;
-		if (!io_data->read) {
-			copied = copy_from_iter(data, data_len, &io_data->data);
-			if (copied != data_len) {
-				ret = -EFAULT;
-				goto error;
-			}
+		if (unlikely(!data)) {
+			ret = -ENOMEM;
+			goto error_mutex;
+		}
+		if (!io_data->read &&
+		    copy_from_iter(data, data_len, &io_data->data) != data_len) {
+			ret = -EFAULT;
+			goto error_mutex;
 		}
 	}
 
-	/* We will be using request */
-	ret = ffs_mutex_lock(&epfile->mutex, file->f_flags & O_NONBLOCK);
-	if (unlikely(ret))
-		goto error;
-
 	spin_lock_irq(&epfile->ffs->eps_lock);
 
 	if (epfile->ep != ep) {
@@ -803,18 +922,13 @@ static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data)
 			interrupted = ep->status < 0;
 		}
 
-		/*
-		 * XXX We may end up silently droping data here.  Since data_len
-		 * (i.e. req->length) may be bigger than len (after being
-		 * rounded up to maxpacketsize), we may end up with more data
-		 * then user space has space for.
-		 */
-		ret = interrupted ? -EINTR : ep->status;
-		if (io_data->read && ret > 0) {
-			ret = copy_to_iter(data, ret, &io_data->data);
-			if (!ret)
-				ret = -EFAULT;
-		}
+		if (interrupted)
+			ret = -EINTR;
+		else if (io_data->read && ep->status > 0)
+			ret = __ffs_epfile_read_data(epfile, data, ep->status,
+						     &io_data->data);
+		else
+			ret = ep->status;
 		goto error_mutex;
 	} else if (!(req = usb_ep_alloc_request(ep->ep, GFP_KERNEL))) {
 		ret = -ENOMEM;
@@ -980,6 +1094,8 @@ ffs_epfile_release(struct inode *inode, struct file *file)
 
 	ENTER();
 
+	kfree(epfile->read_buffer);
+	epfile->read_buffer = NULL;
 	ffs_data_closed(epfile->ffs);
 
 	return 0;
@@ -1605,19 +1721,24 @@ static void ffs_func_eps_disable(struct ffs_function *func)
 	unsigned count            = func->ffs->eps_count;
 	unsigned long flags;
 
-	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	do {
+		if (epfile)
+			mutex_lock(&epfile->mutex);
+		spin_lock_irqsave(&func->ffs->eps_lock, flags);
 		/* pending requests get nuked */
 		if (likely(ep->ep))
 			usb_ep_disable(ep->ep);
 		++ep;
+		spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 
 		if (epfile) {
 			epfile->ep = NULL;
+			kfree(epfile->read_buffer);
+			epfile->read_buffer = NULL;
+			mutex_unlock(&epfile->mutex);
 			++epfile;
 		}
 	} while (--count);
-	spin_unlock_irqrestore(&func->ffs->eps_lock, flags);
 }
 
 static int ffs_func_eps_enable(struct ffs_function *func)
@@ -2227,8 +2348,8 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 {
 	u32 str_count, needed_count, lang_count;
 	struct usb_gadget_strings **stringtabs, *t;
-	struct usb_string *strings, *s;
 	const char *data = _data;
+	struct usb_string *s;
 
 	ENTER();
 
@@ -2286,7 +2407,6 @@ static int __ffs_data_got_strings(struct ffs_data *ffs,
 		stringtabs = vla_ptr(vlabuf, d, stringtabs);
 		t = vla_ptr(vlabuf, d, stringtab);
 		s = vla_ptr(vlabuf, d, strings);
-		strings = s;
 	}
 
 	/* For each language */

drivers/usb/gadget/function/f_mass_storage.c

@@ -2655,18 +2655,6 @@ void fsg_common_put(struct fsg_common *common)
 }
 EXPORT_SYMBOL_GPL(fsg_common_put);
 
-/* check if fsg_num_buffers is within a valid range */
-static inline int fsg_num_buffers_validate(unsigned int fsg_num_buffers)
-{
-#define FSG_MAX_NUM_BUFFERS	32
-
-	if (fsg_num_buffers >= 2 && fsg_num_buffers <= FSG_MAX_NUM_BUFFERS)
-		return 0;
-	pr_err("fsg_num_buffers %u is out of range (%d to %d)\n",
-	       fsg_num_buffers, 2, FSG_MAX_NUM_BUFFERS);
-	return -EINVAL;
-}
-
 static struct fsg_common *fsg_common_setup(struct fsg_common *common)
 {
 	if (!common) {
@@ -2709,11 +2697,7 @@ static void _fsg_common_free_buffers(struct fsg_buffhd *buffhds, unsigned n)
 int fsg_common_set_num_buffers(struct fsg_common *common, unsigned int n)
 {
 	struct fsg_buffhd *bh, *buffhds;
-	int i, rc;
-
-	rc = fsg_num_buffers_validate(n);
-	if (rc != 0)
-		return rc;
+	int i;
 
 	buffhds = kcalloc(n, sizeof(*buffhds), GFP_KERNEL);
 	if (!buffhds)
@@ -3401,10 +3385,6 @@ static ssize_t fsg_opts_num_buffers_store(struct config_item *item,
 	if (ret)
 		goto end;
 
-	ret = fsg_num_buffers_validate(num);
-	if (ret)
-		goto end;
-
 	fsg_common_set_num_buffers(opts->common, num);
 	ret = len;
 

drivers/usb/gadget/function/u_serial.c

@@ -907,7 +907,6 @@ static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 {
 	struct gs_port	*port = tty->driver_data;
 	unsigned long	flags;
-	int		status;
 
 	pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
 			port->port_num, tty, count);
@@ -917,7 +916,7 @@ static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 		count = gs_buf_put(&port->port_write_buf, buf, count);
 	/* treat count == 0 as flush_chars() */
 	if (port->port_usb)
-		status = gs_start_tx(port);
+		gs_start_tx(port);
 	spin_unlock_irqrestore(&port->port_lock, flags);
 
 	return count;

drivers/usb/gadget/legacy/g_ffs.c

@@ -265,7 +265,7 @@ static void *functionfs_acquire_dev(struct ffs_dev *dev)
 {
 	if (!try_module_get(THIS_MODULE))
 		return ERR_PTR(-ENOENT);
-	
+
 	return NULL;
 }
 
@@ -275,7 +275,7 @@ static void functionfs_release_dev(struct ffs_dev *dev)
 }
 
 /*
- * The caller of this function takes ffs_lock 
+ * The caller of this function takes ffs_lock
  */
 static int functionfs_ready_callback(struct ffs_data *ffs)
 {
@@ -294,12 +294,12 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
 		++missing_funcs;
 		gfs_registered = false;
 	}
-	
+
 	return ret;
 }
 
 /*
- * The caller of this function takes ffs_lock 
+ * The caller of this function takes ffs_lock
  */
 static void functionfs_closed_callback(struct ffs_data *ffs)
 {
@@ -347,17 +347,14 @@ static int gfs_bind(struct usb_composite_dev *cdev)
 
 #ifdef CONFIG_USB_FUNCTIONFS_RNDIS
 	{
-		struct f_rndis_opts *rndis_opts;
-
 		fi_rndis = usb_get_function_instance("rndis");
 		if (IS_ERR(fi_rndis)) {
 			ret = PTR_ERR(fi_rndis);
 			goto error;
 		}
-		rndis_opts = container_of(fi_rndis, struct f_rndis_opts,
-					  func_inst);
 #ifndef CONFIG_USB_FUNCTIONFS_ETH
-		net = rndis_opts->net;
+		net = container_of(fi_rndis, struct f_rndis_opts,
+				   func_inst)->net;
 #endif
 	}
 #endif

drivers/usb/gadget/udc/Kconfig

@@ -312,7 +312,7 @@ config USB_NET2272_DMA
 	  If unsure, say "N" here.  The driver works fine in PIO mode.
 
 config USB_NET2280
-	tristate "NetChip 228x / PLX USB338x"
+	tristate "NetChip NET228x / PLX USB3x8x"
 	depends on PCI
 	help
 	   NetChip 2280 / 2282 is a PCI based USB peripheral controller which
@@ -322,6 +322,8 @@ config USB_NET2280
 	   (for control transfers) and several endpoints with dedicated
 	   functions.
 
+	   PLX 2380 is a PCIe version of the PLX 2380.
+
 	   PLX 3380 / 3382 is a PCIe based USB peripheral controller which
 	   supports full, high speed USB 2.0 and super speed USB 3.0
 	   data transfers.

drivers/usb/gadget/udc/Makefile

@@ -1,3 +1,8 @@
+# define_trace.h needs to know how to find our header
+CFLAGS_trace.o			:= -I$(src)
+
+udc-core-y			:= core.o trace.o
+
 #
 # USB peripheral controller drivers
 #

drivers/usb/gadget/udc/amd5536udc.c

@@ -2340,7 +2340,6 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 	struct udc_ep *ep;
 	struct udc_request *req;
 	struct udc_data_dma *td;
-	unsigned dma_done;
 	unsigned len;
 
 	ep = &dev->ep[ep_ix];
@@ -2385,13 +2384,8 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
 			 */
 			if (use_dma_ppb_du) {
 				td = udc_get_last_dma_desc(req);
-				if (td) {
-					dma_done =
-						AMD_GETBITS(td->status,
-						UDC_DMA_IN_STS_BS);
-					/* don't care DMA done */
+				if (td)
 					req->req.actual = req->req.length;
-				}
 			} else {
 				/* assume all bytes transferred */
 				req->req.actual = req->req.length;
@@ -3417,4 +3411,3 @@ module_pci_driver(udc_pci_driver);
 MODULE_DESCRIPTION(UDC_MOD_DESCRIPTION);
 MODULE_AUTHOR("Thomas Dahlmann");
 MODULE_LICENSE("GPL");
-

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -1920,6 +1920,8 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev,
 
 	udc->errata = match->data;
 	udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9g45-pmc");
+	if (IS_ERR(udc->pmc))
+		udc->pmc = syscon_regmap_lookup_by_compatible("atmel,at91sam9x5-pmc");
 	if (udc->errata && IS_ERR(udc->pmc))
 		return ERR_CAST(udc->pmc);
 

drivers/usb/gadget/udc/bdc/bdc_cmd.c

@@ -57,7 +57,6 @@ static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc,
 					u32 param0, u32 param1,	u32 param2)
 {
 	u32 temp, cmd_status;
-	int reset_bdc = 0;
 	int ret;
 
 	temp = bdc_readl(bdc->regs, BDC_CMDSC);
@@ -94,7 +93,6 @@ static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc,
 
 	case BDC_CMDS_INTL:
 		dev_err(bdc->dev, "BDC Internal error\n");
-		reset_bdc = 1;
 		ret = -ECONNRESET;
 		break;
 
@@ -102,7 +100,6 @@ static int bdc_submit_cmd(struct bdc *bdc, u32 cmd_sc,
 		dev_err(bdc->dev,
 			"command timedout waited for %dusec\n",
 			BDC_CMD_TIMEOUT);
-		reset_bdc = 1;
 		ret = -ECONNRESET;
 		break;
 	default:

drivers/usb/gadget/udc/bdc/bdc_ep.c

@@ -81,7 +81,7 @@ static void ep_bd_list_free(struct bdc_ep *ep, u32 num_tabs)
 			continue;
 		}
 		if (!bd_table->start_bd) {
-			dev_dbg(bdc->dev, "bd dma pool not allocted\n");
+			dev_dbg(bdc->dev, "bd dma pool not allocated\n");
 			continue;
 		}
 
@@ -702,11 +702,9 @@ static int ep0_queue(struct bdc_ep *ep, struct bdc_req *req)
 /* Queue data stage */
 static int ep0_queue_data_stage(struct bdc *bdc)
 {
-	struct usb_request *ep0_usb_req;
 	struct bdc_ep *ep;
 
 	dev_dbg(bdc->dev, "%s\n", __func__);
-	ep0_usb_req = &bdc->ep0_req.usb_req;
 	ep = bdc->bdc_ep_array[1];
 	bdc->ep0_req.ep = ep;
 	bdc->ep0_req.usb_req.complete = NULL;
@@ -1393,10 +1391,8 @@ static int ep0_set_sel(struct bdc *bdc,
 {
 	struct bdc_ep	*ep;
 	u16	wLength;
-	u16	wValue;
 
 	dev_dbg(bdc->dev, "%s\n", __func__);
-	wValue = le16_to_cpu(setup_pkt->wValue);
 	wLength = le16_to_cpu(setup_pkt->wLength);
 	if (unlikely(wLength != 6)) {
 		dev_err(bdc->dev, "%s Wrong wLength:%d\n", __func__, wLength);

drivers/usb/gadget/udc/core.c

@@ -0,0 +1,1523 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb.h>
+
+#include "trace.h"
+
+/**
+ * struct usb_udc - describes one usb device controller
+ * @driver - the gadget driver pointer. For use by the class code
+ * @dev - the child device to the actual controller
+ * @gadget - the gadget. For use by the class code
+ * @list - for use by the udc class driver
+ * @vbus - for udcs who care about vbus status, this value is real vbus status;
+ * for udcs who do not care about vbus status, this value is always true
+ *
+ * This represents the internal data structure which is used by the UDC-class
+ * to hold information about udc driver and gadget together.
+ */
+struct usb_udc {
+	struct usb_gadget_driver	*driver;
+	struct usb_gadget		*gadget;
+	struct device			dev;
+	struct list_head		list;
+	bool				vbus;
+};
+
+static struct class *udc_class;
+static LIST_HEAD(udc_list);
+static LIST_HEAD(gadget_driver_pending_list);
+static DEFINE_MUTEX(udc_lock);
+
+static int udc_bind_to_driver(struct usb_udc *udc,
+		struct usb_gadget_driver *driver);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function should be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+					      unsigned maxpacket_limit)
+{
+	ep->maxpacket_limit = maxpacket_limit;
+	ep->maxpacket = maxpacket_limit;
+
+	trace_usb_ep_set_maxpacket_limit(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_maxpacket_limit);
+
+/**
+ * usb_ep_enable - configure endpoint, making it usable
+ * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
+ *	drivers discover endpoints through the ep_list of a usb_gadget.
+ *
+ * When configurations are set, or when interface settings change, the driver
+ * will enable or disable the relevant endpoints.  while it is enabled, an
+ * endpoint may be used for i/o until the driver receives a disconnect() from
+ * the host or until the endpoint is disabled.
+ *
+ * the ep0 implementation (which calls this routine) must ensure that the
+ * hardware capabilities of each endpoint match the descriptor provided
+ * for it.  for example, an endpoint named "ep2in-bulk" would be usable
+ * for interrupt transfers as well as bulk, but it likely couldn't be used
+ * for iso transfers or for endpoint 14.  some endpoints are fully
+ * configurable, with more generic names like "ep-a".  (remember that for
+ * USB, "in" means "towards the USB master".)
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_enable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (ep->enabled)
+		goto out;
+
+	ret = ep->ops->enable(ep, ep->desc);
+	if (ret) {
+		ret = ret;
+		goto out;
+	}
+
+	ep->enabled = true;
+
+out:
+	trace_usb_ep_enable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_enable);
+
+/**
+ * usb_ep_disable - endpoint is no longer usable
+ * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
+ *
+ * no other task may be using this endpoint when this is called.
+ * any pending and uncompleted requests will complete with status
+ * indicating disconnect (-ESHUTDOWN) before this call returns.
+ * gadget drivers must call usb_ep_enable() again before queueing
+ * requests to the endpoint.
+ *
+ * returns zero, or a negative error code.
+ */
+int usb_ep_disable(struct usb_ep *ep)
+{
+	int ret = 0;
+
+	if (!ep->enabled)
+		goto out;
+
+	ret = ep->ops->disable(ep);
+	if (ret) {
+		ret = ret;
+		goto out;
+	}
+
+	ep->enabled = false;
+
+out:
+	trace_usb_ep_disable(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_disable);
+
+/**
+ * usb_ep_alloc_request - allocate a request object to use with this endpoint
+ * @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
+ *
+ * Request objects must be allocated with this call, since they normally
+ * need controller-specific setup and may even need endpoint-specific
+ * resources such as allocation of DMA descriptors.
+ * Requests may be submitted with usb_ep_queue(), and receive a single
+ * completion callback.  Free requests with usb_ep_free_request(), when
+ * they are no longer needed.
+ *
+ * Returns the request, or null if one could not be allocated.
+ */
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
+						       gfp_t gfp_flags)
+{
+	struct usb_request *req = NULL;
+
+	req = ep->ops->alloc_request(ep, gfp_flags);
+
+	trace_usb_ep_alloc_request(ep, req, req ? 0 : -ENOMEM);
+
+	return req;
+}
+EXPORT_SYMBOL_GPL(usb_ep_alloc_request);
+
+/**
+ * usb_ep_free_request - frees a request object
+ * @ep:the endpoint associated with the request
+ * @req:the request being freed
+ *
+ * Reverses the effect of usb_ep_alloc_request().
+ * Caller guarantees the request is not queued, and that it will
+ * no longer be requeued (or otherwise used).
+ */
+void usb_ep_free_request(struct usb_ep *ep,
+				       struct usb_request *req)
+{
+	ep->ops->free_request(ep, req);
+	trace_usb_ep_free_request(ep, req, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_free_request);
+
+/**
+ * usb_ep_queue - queues (submits) an I/O request to an endpoint.
+ * @ep:the endpoint associated with the request
+ * @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ *	pre-allocate all necessary memory with the request.
+ *
+ * This tells the device controller to perform the specified request through
+ * that endpoint (reading or writing a buffer).  When the request completes,
+ * including being canceled by usb_ep_dequeue(), the request's completion
+ * routine is called to return the request to the driver.  Any endpoint
+ * (except control endpoints like ep0) may have more than one transfer
+ * request queued; they complete in FIFO order.  Once a gadget driver
+ * submits a request, that request may not be examined or modified until it
+ * is given back to that driver through the completion callback.
+ *
+ * Each request is turned into one or more packets.  The controller driver
+ * never merges adjacent requests into the same packet.  OUT transfers
+ * will sometimes use data that's already buffered in the hardware.
+ * Drivers can rely on the fact that the first byte of the request's buffer
+ * always corresponds to the first byte of some USB packet, for both
+ * IN and OUT transfers.
+ *
+ * Bulk endpoints can queue any amount of data; the transfer is packetized
+ * automatically.  The last packet will be short if the request doesn't fill it
+ * out completely.  Zero length packets (ZLPs) should be avoided in portable
+ * protocols since not all usb hardware can successfully handle zero length
+ * packets.  (ZLPs may be explicitly written, and may be implicitly written if
+ * the request 'zero' flag is set.)  Bulk endpoints may also be used
+ * for interrupt transfers; but the reverse is not true, and some endpoints
+ * won't support every interrupt transfer.  (Such as 768 byte packets.)
+ *
+ * Interrupt-only endpoints are less functional than bulk endpoints, for
+ * example by not supporting queueing or not handling buffers that are
+ * larger than the endpoint's maxpacket size.  They may also treat data
+ * toggle differently.
+ *
+ * Control endpoints ... after getting a setup() callback, the driver queues
+ * one response (even if it would be zero length).  That enables the
+ * status ack, after transferring data as specified in the response.  Setup
+ * functions may return negative error codes to generate protocol stalls.
+ * (Note that some USB device controllers disallow protocol stall responses
+ * in some cases.)  When control responses are deferred (the response is
+ * written after the setup callback returns), then usb_ep_set_halt() may be
+ * used on ep0 to trigger protocol stalls.  Depending on the controller,
+ * it may not be possible to trigger a status-stage protocol stall when the
+ * data stage is over, that is, from within the response's completion
+ * routine.
+ *
+ * For periodic endpoints, like interrupt or isochronous ones, the usb host
+ * arranges to poll once per interval, and the gadget driver usually will
+ * have queued some data to transfer at that time.
+ *
+ * Returns zero, or a negative error code.  Endpoints that are not enabled
+ * report errors; errors will also be
+ * reported when the usb peripheral is disconnected.
+ */
+int usb_ep_queue(struct usb_ep *ep,
+			       struct usb_request *req, gfp_t gfp_flags)
+{
+	int ret = 0;
+
+	if (WARN_ON_ONCE(!ep->enabled && ep->address)) {
+		ret = -ESHUTDOWN;
+		goto out;
+	}
+
+	ret = ep->ops->queue(ep, req, gfp_flags);
+
+out:
+	trace_usb_ep_queue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_queue);
+
+/**
+ * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
+ * @ep:the endpoint associated with the request
+ * @req:the request being canceled
+ *
+ * If the request is still active on the endpoint, it is dequeued and its
+ * completion routine is called (with status -ECONNRESET); else a negative
+ * error code is returned. This is guaranteed to happen before the call to
+ * usb_ep_dequeue() returns.
+ *
+ * Note that some hardware can't clear out write fifos (to unlink the request
+ * at the head of the queue) except as part of disconnecting from usb. Such
+ * restrictions prevent drivers from supporting configuration changes,
+ * even to configuration zero (a "chapter 9" requirement).
+ */
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
+{
+	int ret;
+
+	ret = ep->ops->dequeue(ep, req);
+	trace_usb_ep_dequeue(ep, req, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_dequeue);
+
+/**
+ * usb_ep_set_halt - sets the endpoint halt feature.
+ * @ep: the non-isochronous endpoint being stalled
+ *
+ * Use this to stall an endpoint, perhaps as an error report.
+ * Except for control endpoints,
+ * the endpoint stays halted (will not stream any data) until the host
+ * clears this feature; drivers may need to empty the endpoint's request
+ * queue first, to make sure no inappropriate transfers happen.
+ *
+ * Note that while an endpoint CLEAR_FEATURE will be invisible to the
+ * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
+ * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
+ * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
+ *
+ * Returns zero, or a negative error code.  On success, this call sets
+ * underlying hardware state that blocks data transfers.
+ * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
+ * transfer requests are still queued, or if the controller hardware
+ * (usually a FIFO) still holds bytes that the host hasn't collected.
+ */
+int usb_ep_set_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 1);
+	trace_usb_ep_set_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_halt);
+
+/**
+ * usb_ep_clear_halt - clears endpoint halt, and resets toggle
+ * @ep:the bulk or interrupt endpoint being reset
+ *
+ * Use this when responding to the standard usb "set interface" request,
+ * for endpoints that aren't reconfigured, after clearing any other state
+ * in the endpoint's i/o queue.
+ *
+ * Returns zero, or a negative error code.  On success, this call clears
+ * the underlying hardware state reflecting endpoint halt and data toggle.
+ * Note that some hardware can't support this request (like pxa2xx_udc),
+ * and accordingly can't correctly implement interface altsettings.
+ */
+int usb_ep_clear_halt(struct usb_ep *ep)
+{
+	int ret;
+
+	ret = ep->ops->set_halt(ep, 0);
+	trace_usb_ep_clear_halt(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_clear_halt);
+
+/**
+ * usb_ep_set_wedge - sets the halt feature and ignores clear requests
+ * @ep: the endpoint being wedged
+ *
+ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
+ * requests. If the gadget driver clears the halt status, it will
+ * automatically unwedge the endpoint.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_ep_set_wedge(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->set_wedge)
+		ret = ep->ops->set_wedge(ep);
+	else
+		ret = ep->ops->set_halt(ep, 1);
+
+	trace_usb_ep_set_wedge(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_set_wedge);
+
+/**
+ * usb_ep_fifo_status - returns number of bytes in fifo, or error
+ * @ep: the endpoint whose fifo status is being checked.
+ *
+ * FIFO endpoints may have "unclaimed data" in them in certain cases,
+ * such as after aborted transfers.  Hosts may not have collected all
+ * the IN data written by the gadget driver (and reported by a request
+ * completion).  The gadget driver may not have collected all the data
+ * written OUT to it by the host.  Drivers that need precise handling for
+ * fault reporting or recovery may need to use this call.
+ *
+ * This returns the number of such bytes in the fifo, or a negative
+ * errno if the endpoint doesn't use a FIFO or doesn't support such
+ * precise handling.
+ */
+int usb_ep_fifo_status(struct usb_ep *ep)
+{
+	int ret;
+
+	if (ep->ops->fifo_status)
+		ret = ep->ops->fifo_status(ep);
+	else
+		ret = -EOPNOTSUPP;
+
+	trace_usb_ep_fifo_status(ep, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_status);
+
+/**
+ * usb_ep_fifo_flush - flushes contents of a fifo
+ * @ep: the endpoint whose fifo is being flushed.
+ *
+ * This call may be used to flush the "unclaimed data" that may exist in
+ * an endpoint fifo after abnormal transaction terminations.  The call
+ * must never be used except when endpoint is not being used for any
+ * protocol translation.
+ */
+void usb_ep_fifo_flush(struct usb_ep *ep)
+{
+	if (ep->ops->fifo_flush)
+		ep->ops->fifo_flush(ep);
+
+	trace_usb_ep_fifo_flush(ep, 0);
+}
+EXPORT_SYMBOL_GPL(usb_ep_fifo_flush);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_frame_number - returns the current frame number
+ * @gadget: controller that reports the frame number
+ *
+ * Returns the usb frame number, normally eleven bits from a SOF packet,
+ * or negative errno if this device doesn't support this capability.
+ */
+int usb_gadget_frame_number(struct usb_gadget *gadget)
+{
+	int ret;
+
+	ret = gadget->ops->get_frame(gadget);
+
+	trace_usb_gadget_frame_number(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_frame_number);
+
+/**
+ * usb_gadget_wakeup - tries to wake up the host connected to this gadget
+ * @gadget: controller used to wake up the host
+ *
+ * Returns zero on success, else negative error code if the hardware
+ * doesn't support such attempts, or its support has not been enabled
+ * by the usb host.  Drivers must return device descriptors that report
+ * their ability to support this, or hosts won't enable it.
+ *
+ * This may also try to use SRP to wake the host and start enumeration,
+ * even if OTG isn't otherwise in use.  OTG devices may also start
+ * remote wakeup even when hosts don't explicitly enable it.
+ */
+int usb_gadget_wakeup(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->wakeup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->wakeup(gadget);
+
+out:
+	trace_usb_gadget_wakeup(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_wakeup);
+
+/**
+ * usb_gadget_set_selfpowered - sets the device selfpowered feature.
+ * @gadget:the device being declared as self-powered
+ *
+ * this affects the device status reported by the hardware driver
+ * to reflect that it now has a local power supply.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 1);
+
+out:
+	trace_usb_gadget_set_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_selfpowered);
+
+/**
+ * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
+ * @gadget:the device being declared as bus-powered
+ *
+ * this affects the device status reported by the hardware driver.
+ * some hardware may not support bus-powered operation, in which
+ * case this feature's value can never change.
+ *
+ * returns zero on success, else negative errno.
+ */
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->set_selfpowered) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->set_selfpowered(gadget, 0);
+
+out:
+	trace_usb_gadget_clear_selfpowered(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_clear_selfpowered);
+
+/**
+ * usb_gadget_vbus_connect - Notify controller that VBUS is powered
+ * @gadget:The device which now has VBUS power.
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session starting.  Common responses include
+ * resuming the controller, activating the D+ (or D-) pullup to let the
+ * host detect that a USB device is attached, and starting to draw power
+ * (8mA or possibly more, especially after SET_CONFIGURATION).
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_connect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 1);
+
+out:
+	trace_usb_gadget_vbus_connect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_connect);
+
+/**
+ * usb_gadget_vbus_draw - constrain controller's VBUS power usage
+ * @gadget:The device whose VBUS usage is being described
+ * @mA:How much current to draw, in milliAmperes.  This should be twice
+ *	the value listed in the configuration descriptor bMaxPower field.
+ *
+ * This call is used by gadget drivers during SET_CONFIGURATION calls,
+ * reporting how much power the device may consume.  For example, this
+ * could affect how quickly batteries are recharged.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_draw) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_draw(gadget, mA);
+	if (!ret)
+		gadget->mA = mA;
+
+out:
+	trace_usb_gadget_vbus_draw(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_draw);
+
+/**
+ * usb_gadget_vbus_disconnect - notify controller about VBUS session end
+ * @gadget:the device whose VBUS supply is being described
+ * Context: can sleep
+ *
+ * This call is used by a driver for an external transceiver (or GPIO)
+ * that detects a VBUS power session ending.  Common responses include
+ * reversing everything done in usb_gadget_vbus_connect().
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->vbus_session) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	ret = gadget->ops->vbus_session(gadget, 0);
+
+out:
+	trace_usb_gadget_vbus_disconnect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
+
+/**
+ * usb_gadget_connect - software-controlled connect to USB host
+ * @gadget:the peripheral being connected
+ *
+ * Enables the D+ (or potentially D-) pullup.  The host will start
+ * enumerating this gadget when the pullup is active and a VBUS session
+ * is active (the link is powered).  This pullup is always enabled unless
+ * usb_gadget_disconnect() has been used to disable it.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_connect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (gadget->deactivated) {
+		/*
+		 * If gadget is deactivated we only save new state.
+		 * Gadget will be connected automatically after activation.
+		 */
+		gadget->connected = true;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 1);
+	if (!ret)
+		gadget->connected = 1;
+
+out:
+	trace_usb_gadget_connect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_connect);
+
+/**
+ * usb_gadget_disconnect - software-controlled disconnect from USB host
+ * @gadget:the peripheral being disconnected
+ *
+ * Disables the D+ (or potentially D-) pullup, which the host may see
+ * as a disconnect (when a VBUS session is active).  Not all systems
+ * support software pullup controls.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_disconnect(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->ops->pullup) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	if (gadget->deactivated) {
+		/*
+		 * If gadget is deactivated we only save new state.
+		 * Gadget will stay disconnected after activation.
+		 */
+		gadget->connected = false;
+		goto out;
+	}
+
+	ret = gadget->ops->pullup(gadget, 0);
+	if (!ret)
+		gadget->connected = 0;
+
+out:
+	trace_usb_gadget_disconnect(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_disconnect);
+
+/**
+ * usb_gadget_deactivate - deactivate function which is not ready to work
+ * @gadget: the peripheral being deactivated
+ *
+ * This routine may be used during the gadget driver bind() call to prevent
+ * the peripheral from ever being visible to the USB host, unless later
+ * usb_gadget_activate() is called.  For example, user mode components may
+ * need to be activated before the system can talk to hosts.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_deactivate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (gadget->deactivated)
+		goto out;
+
+	if (gadget->connected) {
+		ret = usb_gadget_disconnect(gadget);
+		if (ret)
+			goto out;
+
+		/*
+		 * If gadget was being connected before deactivation, we want
+		 * to reconnect it in usb_gadget_activate().
+		 */
+		gadget->connected = true;
+	}
+	gadget->deactivated = true;
+
+out:
+	trace_usb_gadget_deactivate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_deactivate);
+
+/**
+ * usb_gadget_activate - activate function which is not ready to work
+ * @gadget: the peripheral being activated
+ *
+ * This routine activates gadget which was previously deactivated with
+ * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
+ *
+ * Returns zero on success, else negative errno.
+ */
+int usb_gadget_activate(struct usb_gadget *gadget)
+{
+	int ret = 0;
+
+	if (!gadget->deactivated)
+		goto out;
+
+	gadget->deactivated = false;
+
+	/*
+	 * If gadget has been connected before deactivation, or became connected
+	 * while it was being deactivated, we call usb_gadget_connect().
+	 */
+	if (gadget->connected)
+		ret = usb_gadget_connect(gadget);
+
+out:
+	trace_usb_gadget_activate(gadget, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_activate);
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef	CONFIG_HAS_DMA
+
+int usb_gadget_map_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return 0;
+
+	if (req->num_sgs) {
+		int     mapped;
+
+		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+		if (mapped == 0) {
+			dev_err(dev, "failed to map SGs\n");
+			return -EFAULT;
+		}
+
+		req->num_mapped_sgs = mapped;
+	} else {
+		req->dma = dma_map_single(dev, req->buf, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		if (dma_mapping_error(dev, req->dma)) {
+			dev_err(dev, "failed to map buffer\n");
+			return -EFAULT;
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev);
+
+int usb_gadget_map_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request);
+
+void usb_gadget_unmap_request_by_dev(struct device *dev,
+		struct usb_request *req, int is_in)
+{
+	if (req->length == 0)
+		return;
+
+	if (req->num_mapped_sgs) {
+		dma_unmap_sg(dev, req->sg, req->num_mapped_sgs,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+		req->num_mapped_sgs = 0;
+	} else {
+		dma_unmap_single(dev, req->dma, req->length,
+				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev);
+
+void usb_gadget_unmap_request(struct usb_gadget *gadget,
+		struct usb_request *req, int is_in)
+{
+	usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+
+#endif	/* CONFIG_HAS_DMA */
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_giveback_request - give the request back to the gadget layer
+ * Context: in_interrupt()
+ *
+ * This is called by device controller drivers in order to return the
+ * completed request back to the gadget layer.
+ */
+void usb_gadget_giveback_request(struct usb_ep *ep,
+		struct usb_request *req)
+{
+	if (likely(req->status == 0))
+		usb_led_activity(USB_LED_EVENT_GADGET);
+
+	trace_usb_gadget_giveback_request(ep, req, 0);
+
+	req->complete(ep, req);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
+ *	in second parameter or NULL if searched endpoint not found
+ * @g: controller to check for quirk
+ * @name: name of searched endpoint
+ */
+struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
+{
+	struct usb_ep *ep;
+
+	gadget_for_each_ep(ep, g) {
+		if (!strcmp(ep->name, name))
+			return ep;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
+
+/* ------------------------------------------------------------------------- */
+
+int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
+		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
+		struct usb_ss_ep_comp_descriptor *ep_comp)
+{
+	u8		type;
+	u16		max;
+	int		num_req_streams = 0;
+
+	/* endpoint already claimed? */
+	if (ep->claimed)
+		return 0;
+
+	type = usb_endpoint_type(desc);
+	max = 0x7ff & usb_endpoint_maxp(desc);
+
+	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
+		return 0;
+	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
+		return 0;
+
+	if (max > ep->maxpacket_limit)
+		return 0;
+
+	/* "high bandwidth" works only at high speed */
+	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
+		return 0;
+
+	switch (type) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		/* only support ep0 for portable CONTROL traffic */
+		return 0;
+	case USB_ENDPOINT_XFER_ISOC:
+		if (!ep->caps.type_iso)
+			return 0;
+		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 1023)
+			return 0;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		if (!ep->caps.type_bulk)
+			return 0;
+		if (ep_comp && gadget_is_superspeed(gadget)) {
+			/* Get the number of required streams from the
+			 * EP companion descriptor and see if the EP
+			 * matches it
+			 */
+			num_req_streams = ep_comp->bmAttributes & 0x1f;
+			if (num_req_streams > ep->max_streams)
+				return 0;
+		}
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		/* Bulk endpoints handle interrupt transfers,
+		 * except the toggle-quirky iso-synch kind
+		 */
+		if (!ep->caps.type_int && !ep->caps.type_bulk)
+			return 0;
+		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
+		if (!gadget_is_dualspeed(gadget) && max > 64)
+			return 0;
+		break;
+	}
+
+	return 1;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
+
+/* ------------------------------------------------------------------------- */
+
+static void usb_gadget_state_work(struct work_struct *work)
+{
+	struct usb_gadget *gadget = work_to_gadget(work);
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc)
+		sysfs_notify(&udc->dev.kobj, NULL, "state");
+}
+
+void usb_gadget_set_state(struct usb_gadget *gadget,
+		enum usb_device_state state)
+{
+	gadget->state = state;
+	schedule_work(&gadget->work);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_state);
+
+/* ------------------------------------------------------------------------- */
+
+static void usb_udc_connect_control(struct usb_udc *udc)
+{
+	if (udc->vbus)
+		usb_gadget_connect(udc->gadget);
+	else
+		usb_gadget_disconnect(udc->gadget);
+}
+
+/**
+ * usb_udc_vbus_handler - updates the udc core vbus status, and try to
+ * connect or disconnect gadget
+ * @gadget: The gadget which vbus change occurs
+ * @status: The vbus status
+ *
+ * The udc driver calls it when it wants to connect or disconnect gadget
+ * according to vbus status.
+ */
+void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (udc) {
+		udc->vbus = status;
+		usb_udc_connect_control(udc);
+	}
+}
+EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
+
+/**
+ * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
+ * @gadget: The gadget which bus reset occurs
+ * @driver: The gadget driver we want to notify
+ *
+ * If the udc driver has bus reset handler, it needs to call this when the bus
+ * reset occurs, it notifies the gadget driver that the bus reset occurs as
+ * well as updates gadget state.
+ */
+void usb_gadget_udc_reset(struct usb_gadget *gadget,
+		struct usb_gadget_driver *driver)
+{
+	driver->reset(gadget);
+	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
+}
+EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
+
+/**
+ * usb_gadget_udc_start - tells usb device controller to start up
+ * @udc: The UDC to be started
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_udc_start(struct usb_udc *udc)
+{
+	return udc->gadget->ops->udc_start(udc->gadget, udc->driver);
+}
+
+/**
+ * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * @gadget: The device we want to stop activity
+ * @driver: The driver to unbind from @gadget
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ */
+static inline void usb_gadget_udc_stop(struct usb_udc *udc)
+{
+	udc->gadget->ops->udc_stop(udc->gadget);
+}
+
+/**
+ * usb_udc_release - release the usb_udc struct
+ * @dev: the dev member within usb_udc
+ *
+ * This is called by driver's core in order to free memory once the last
+ * reference is released.
+ */
+static void usb_udc_release(struct device *dev)
+{
+	struct usb_udc *udc;
+
+	udc = container_of(dev, struct usb_udc, dev);
+	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+	kfree(udc);
+}
+
+static const struct attribute_group *usb_udc_attr_groups[];
+
+static void usb_udc_nop_release(struct device *dev)
+{
+	dev_vdbg(dev, "%s\n", __func__);
+}
+
+/**
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
+		void (*release)(struct device *dev))
+{
+	struct usb_udc		*udc;
+	struct usb_gadget_driver *driver;
+	int			ret = -ENOMEM;
+
+	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+	if (!udc)
+		goto err1;
+
+	dev_set_name(&gadget->dev, "gadget");
+	INIT_WORK(&gadget->work, usb_gadget_state_work);
+	gadget->dev.parent = parent;
+
+	if (release)
+		gadget->dev.release = release;
+	else
+		gadget->dev.release = usb_udc_nop_release;
+
+	ret = device_register(&gadget->dev);
+	if (ret)
+		goto err2;
+
+	device_initialize(&udc->dev);
+	udc->dev.release = usb_udc_release;
+	udc->dev.class = udc_class;
+	udc->dev.groups = usb_udc_attr_groups;
+	udc->dev.parent = parent;
+	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
+	if (ret)
+		goto err3;
+
+	udc->gadget = gadget;
+	gadget->udc = udc;
+
+	mutex_lock(&udc_lock);
+	list_add_tail(&udc->list, &udc_list);
+
+	ret = device_add(&udc->dev);
+	if (ret)
+		goto err4;
+
+	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+	udc->vbus = true;
+
+	/* pick up one of pending gadget drivers */
+	list_for_each_entry(driver, &gadget_driver_pending_list, pending) {
+		if (!driver->udc_name || strcmp(driver->udc_name,
+						dev_name(&udc->dev)) == 0) {
+			ret = udc_bind_to_driver(udc, driver);
+			if (ret != -EPROBE_DEFER)
+				list_del(&driver->pending);
+			if (ret)
+				goto err4;
+			break;
+		}
+	}
+
+	mutex_unlock(&udc_lock);
+
+	return 0;
+
+err4:
+	list_del(&udc->list);
+	mutex_unlock(&udc_lock);
+
+err3:
+	put_device(&udc->dev);
+	device_del(&gadget->dev);
+
+err2:
+	put_device(&gadget->dev);
+	kfree(udc);
+
+err1:
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
+
+/**
+ * usb_get_gadget_udc_name - get the name of the first UDC controller
+ * This functions returns the name of the first UDC controller in the system.
+ * Please note that this interface is usefull only for legacy drivers which
+ * assume that there is only one UDC controller in the system and they need to
+ * get its name before initialization. There is no guarantee that the UDC
+ * of the returned name will be still available, when gadget driver registers
+ * itself.
+ *
+ * Returns pointer to string with UDC controller name on success, NULL
+ * otherwise. Caller should kfree() returned string.
+ */
+char *usb_get_gadget_udc_name(void)
+{
+	struct usb_udc *udc;
+	char *name = NULL;
+
+	/* For now we take the first available UDC */
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list) {
+		if (!udc->driver) {
+			name = kstrdup(udc->gadget->name, GFP_KERNEL);
+			break;
+		}
+	}
+	mutex_unlock(&udc_lock);
+	return name;
+}
+EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
+
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
+{
+	return usb_add_gadget_udc_release(parent, gadget, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
+
+static void usb_gadget_remove_driver(struct usb_udc *udc)
+{
+	dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
+			udc->driver->function);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+
+	usb_gadget_disconnect(udc->gadget);
+	udc->driver->disconnect(udc->gadget);
+	udc->driver->unbind(udc->gadget);
+	usb_gadget_udc_stop(udc);
+
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
+}
+
+/**
+ * usb_del_gadget_udc - deletes @udc from udc_list
+ * @gadget: the gadget to be removed.
+ *
+ * This, will call usb_gadget_unregister_driver() if
+ * the @udc is still busy.
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+	struct usb_udc *udc = gadget->udc;
+
+	if (!udc)
+		return;
+
+	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
+
+	mutex_lock(&udc_lock);
+	list_del(&udc->list);
+
+	if (udc->driver) {
+		struct usb_gadget_driver *driver = udc->driver;
+
+		usb_gadget_remove_driver(udc);
+		list_add(&driver->pending, &gadget_driver_pending_list);
+	}
+	mutex_unlock(&udc_lock);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
+	flush_work(&gadget->work);
+	device_unregister(&udc->dev);
+	device_unregister(&gadget->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
+
+/* ------------------------------------------------------------------------- */
+
+static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
+{
+	int ret;
+
+	dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
+			driver->function);
+
+	udc->driver = driver;
+	udc->dev.driver = &driver->driver;
+	udc->gadget->dev.driver = &driver->driver;
+
+	ret = driver->bind(udc->gadget, driver);
+	if (ret)
+		goto err1;
+	ret = usb_gadget_udc_start(udc);
+	if (ret) {
+		driver->unbind(udc->gadget);
+		goto err1;
+	}
+	usb_udc_connect_control(udc);
+
+	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
+	return 0;
+err1:
+	if (ret != -EISNAM)
+		dev_err(&udc->dev, "failed to start %s: %d\n",
+			udc->driver->function, ret);
+	udc->driver = NULL;
+	udc->dev.driver = NULL;
+	udc->gadget->dev.driver = NULL;
+	return ret;
+}
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
+{
+	struct usb_udc		*udc = NULL;
+	int			ret = -ENODEV;
+
+	if (!driver || !driver->bind || !driver->setup)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	if (driver->udc_name) {
+		list_for_each_entry(udc, &udc_list, list) {
+			ret = strcmp(driver->udc_name, dev_name(&udc->dev));
+			if (!ret)
+				break;
+		}
+		if (!ret && !udc->driver)
+			goto found;
+	} else {
+		list_for_each_entry(udc, &udc_list, list) {
+			/* For now we take the first one */
+			if (!udc->driver)
+				goto found;
+		}
+	}
+
+	if (!driver->match_existing_only) {
+		list_add_tail(&driver->pending, &gadget_driver_pending_list);
+		pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
+			driver->function);
+		ret = 0;
+	}
+
+	mutex_unlock(&udc_lock);
+	return ret;
+found:
+	ret = udc_bind_to_driver(udc, driver);
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct usb_udc		*udc = NULL;
+	int			ret = -ENODEV;
+
+	if (!driver || !driver->unbind)
+		return -EINVAL;
+
+	mutex_lock(&udc_lock);
+	list_for_each_entry(udc, &udc_list, list)
+		if (udc->driver == driver) {
+			usb_gadget_remove_driver(udc);
+			usb_gadget_set_state(udc->gadget,
+					USB_STATE_NOTATTACHED);
+			ret = 0;
+			break;
+		}
+
+	if (ret) {
+		list_del(&driver->pending);
+		ret = 0;
+	}
+	mutex_unlock(&udc_lock);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
+
+/* ------------------------------------------------------------------------- */
+
+static ssize_t usb_udc_srp_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+
+	if (sysfs_streq(buf, "1"))
+		usb_gadget_wakeup(udc->gadget);
+
+	return n;
+}
+static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
+
+static ssize_t usb_udc_softconn_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t n)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+
+	if (!udc->driver) {
+		dev_err(dev, "soft-connect without a gadget driver\n");
+		return -EOPNOTSUPP;
+	}
+
+	if (sysfs_streq(buf, "connect")) {
+		usb_gadget_udc_start(udc);
+		usb_gadget_connect(udc->gadget);
+	} else if (sysfs_streq(buf, "disconnect")) {
+		usb_gadget_disconnect(udc->gadget);
+		udc->driver->disconnect(udc->gadget);
+		usb_gadget_udc_stop(udc);
+	} else {
+		dev_err(dev, "unsupported command '%s'\n", buf);
+		return -EINVAL;
+	}
+
+	return n;
+}
+static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
+
+static ssize_t state_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	struct usb_gadget	*gadget = udc->gadget;
+
+	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
+}
+static DEVICE_ATTR_RO(state);
+
+#define USB_UDC_SPEED_ATTR(name, param)					\
+ssize_t name##_show(struct device *dev,					\
+		struct device_attribute *attr, char *buf)		\
+{									\
+	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
+	return snprintf(buf, PAGE_SIZE, "%s\n",				\
+			usb_speed_string(udc->gadget->param));		\
+}									\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_SPEED_ATTR(current_speed, speed);
+static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
+
+#define USB_UDC_ATTR(name)					\
+ssize_t name##_show(struct device *dev,				\
+		struct device_attribute *attr, char *buf)	\
+{								\
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
+	struct usb_gadget	*gadget = udc->gadget;		\
+								\
+	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
+}								\
+static DEVICE_ATTR_RO(name)
+
+static USB_UDC_ATTR(is_otg);
+static USB_UDC_ATTR(is_a_peripheral);
+static USB_UDC_ATTR(b_hnp_enable);
+static USB_UDC_ATTR(a_hnp_support);
+static USB_UDC_ATTR(a_alt_hnp_support);
+static USB_UDC_ATTR(is_selfpowered);
+
+static struct attribute *usb_udc_attrs[] = {
+	&dev_attr_srp.attr,
+	&dev_attr_soft_connect.attr,
+	&dev_attr_state.attr,
+	&dev_attr_current_speed.attr,
+	&dev_attr_maximum_speed.attr,
+
+	&dev_attr_is_otg.attr,
+	&dev_attr_is_a_peripheral.attr,
+	&dev_attr_b_hnp_enable.attr,
+	&dev_attr_a_hnp_support.attr,
+	&dev_attr_a_alt_hnp_support.attr,
+	&dev_attr_is_selfpowered.attr,
+	NULL,
+};
+
+static const struct attribute_group usb_udc_attr_group = {
+	.attrs = usb_udc_attrs,
+};
+
+static const struct attribute_group *usb_udc_attr_groups[] = {
+	&usb_udc_attr_group,
+	NULL,
+};
+
+static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	int			ret;
+
+	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
+	if (ret) {
+		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
+		return ret;
+	}
+
+	if (udc->driver) {
+		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
+				udc->driver->function);
+		if (ret) {
+			dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int __init usb_udc_init(void)
+{
+	udc_class = class_create(THIS_MODULE, "udc");
+	if (IS_ERR(udc_class)) {
+		pr_err("failed to create udc class --> %ld\n",
+				PTR_ERR(udc_class));
+		return PTR_ERR(udc_class);
+	}
+
+	udc_class->dev_uevent = usb_udc_uevent;
+	return 0;
+}
+subsys_initcall(usb_udc_init);
+
+static void __exit usb_udc_exit(void)
+{
+	class_destroy(udc_class);
+}
+module_exit(usb_udc_exit);
+
+MODULE_DESCRIPTION("UDC Framework");
+MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
+MODULE_LICENSE("GPL v2");

drivers/usb/gadget/udc/dummy_hcd.c

@@ -647,12 +647,10 @@ static int dummy_disable(struct usb_ep *_ep)
 static struct usb_request *dummy_alloc_request(struct usb_ep *_ep,
 		gfp_t mem_flags)
 {
-	struct dummy_ep		*ep;
 	struct dummy_request	*req;
 
 	if (!_ep)
 		return NULL;
-	ep = usb_ep_to_dummy_ep(_ep);
 
 	req = kzalloc(sizeof(*req), mem_flags);
 	if (!req)
@@ -2444,9 +2442,6 @@ static int dummy_start(struct usb_hcd *hcd)
 
 static void dummy_stop(struct usb_hcd *hcd)
 {
-	struct dummy		*dum;
-
-	dum = hcd_to_dummy_hcd(hcd)->dum;
 	device_remove_file(dummy_dev(hcd_to_dummy_hcd(hcd)), &dev_attr_urbs);
 	dev_info(dummy_dev(hcd_to_dummy_hcd(hcd)), "stopped\n");
 }

drivers/usb/gadget/udc/m66592-udc.c

@@ -1199,8 +1199,6 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 	struct m66592 *m66592 = _m66592;
 	u16 intsts0;
 	u16 intenb0;
-	u16 brdysts, nrdysts, bempsts;
-	u16 brdyenb, nrdyenb, bempenb;
 	u16 savepipe;
 	u16 mask0;
 
@@ -1224,12 +1222,10 @@ static irqreturn_t m66592_irq(int irq, void *_m66592)
 
 	mask0 = intsts0 & intenb0;
 	if (mask0) {
-		brdysts = m66592_read(m66592, M66592_BRDYSTS);
-		nrdysts = m66592_read(m66592, M66592_NRDYSTS);
-		bempsts = m66592_read(m66592, M66592_BEMPSTS);
-		brdyenb = m66592_read(m66592, M66592_BRDYENB);
-		nrdyenb = m66592_read(m66592, M66592_NRDYENB);
-		bempenb = m66592_read(m66592, M66592_BEMPENB);
+		u16 brdysts = m66592_read(m66592, M66592_BRDYSTS);
+		u16 bempsts = m66592_read(m66592, M66592_BEMPSTS);
+		u16 brdyenb = m66592_read(m66592, M66592_BRDYENB);
+		u16 bempenb = m66592_read(m66592, M66592_BEMPENB);
 
 		if (mask0 & M66592_VBINT) {
 			m66592_write(m66592,  0xffff & ~M66592_VBINT,
@@ -1408,28 +1404,20 @@ static int m66592_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 static int m66592_set_halt(struct usb_ep *_ep, int value)
 {
-	struct m66592_ep *ep;
-	struct m66592_request *req;
+	struct m66592_ep *ep = container_of(_ep, struct m66592_ep, ep);
 	unsigned long flags;
 	int ret = 0;
 
-	ep = container_of(_ep, struct m66592_ep, ep);
-	req = list_entry(ep->queue.next, struct m66592_request, queue);
-
 	spin_lock_irqsave(&ep->m66592->lock, flags);
 	if (!list_empty(&ep->queue)) {
 		ret = -EAGAIN;
-		goto out;
-	}
-	if (value) {
+	} else if (value) {
 		ep->busy = 1;
 		pipe_stall(ep->m66592, ep->pipenum);
 	} else {
 		ep->busy = 0;
 		pipe_stop(ep->m66592, ep->pipenum);
 	}
-
-out:
 	spin_unlock_irqrestore(&ep->m66592->lock, flags);
 	return ret;
 }

drivers/usb/gadget/udc/mv_u3d_core.c

@@ -119,18 +119,14 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
 	struct mv_u3d_req *curr_req)
 {
 	struct mv_u3d_trb	*curr_trb;
-	dma_addr_t cur_deq_lo;
-	struct mv_u3d_ep_context	*curr_ep_context;
-	int trb_complete, actual, remaining_length = 0;
+	int actual, remaining_length = 0;
 	int direction, ep_num;
 	int retval = 0;
 	u32 tmp, status, length;
 
-	curr_ep_context = &u3d->ep_context[index];
 	direction = index % 2;
 	ep_num = index / 2;
 
-	trb_complete = 0;
 	actual = curr_req->req.length;
 
 	while (!list_empty(&curr_req->trb_list)) {
@@ -143,15 +139,10 @@ static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
 		}
 
 		curr_trb->trb_hw->ctrl.own = 0;
-		if (direction == MV_U3D_EP_DIR_OUT) {
+		if (direction == MV_U3D_EP_DIR_OUT)
 			tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
-			cur_deq_lo =
-				ioread32(&u3d->vuc_regs->rxst[ep_num].curdeqlo);
-		} else {
+		else
 			tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
-			cur_deq_lo =
-				ioread32(&u3d->vuc_regs->txst[ep_num].curdeqlo);
-		}
 
 		status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
 		length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
@@ -527,7 +518,6 @@ static int mv_u3d_ep_enable(struct usb_ep *_ep,
 {
 	struct mv_u3d *u3d;
 	struct mv_u3d_ep *ep;
-	struct mv_u3d_ep_context *ep_context;
 	u16 max = 0;
 	unsigned maxburst = 0;
 	u32 epxcr, direction;
@@ -548,9 +538,6 @@ static int mv_u3d_ep_enable(struct usb_ep *_ep,
 		_ep->maxburst = 1;
 	maxburst = _ep->maxburst;
 
-	/* Get the endpoint context address */
-	ep_context = (struct mv_u3d_ep_context *)ep->ep_context;
-
 	/* Set the max burst size */
 	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 	case USB_ENDPOINT_XFER_BULK:
@@ -633,7 +620,6 @@ static int  mv_u3d_ep_disable(struct usb_ep *_ep)
 {
 	struct mv_u3d *u3d;
 	struct mv_u3d_ep *ep;
-	struct mv_u3d_ep_context *ep_context;
 	u32 epxcr, direction;
 	unsigned long flags;
 
@@ -646,9 +632,6 @@ static int  mv_u3d_ep_disable(struct usb_ep *_ep)
 
 	u3d = ep->u3d;
 
-	/* Get the endpoint context address */
-	ep_context = ep->ep_context;
-
 	direction = mv_u3d_ep_dir(ep);
 
 	/* nuke all pending requests (does flush) */

drivers/usb/gadget/udc/mv_udc_core.c

@@ -129,7 +129,7 @@ static int process_ep_req(struct mv_udc *udc, int index,
 {
 	struct mv_dtd	*curr_dtd;
 	struct mv_dqh	*curr_dqh;
-	int td_complete, actual, remaining_length;
+	int actual, remaining_length;
 	int i, direction;
 	int retval = 0;
 	u32 errors;
@@ -139,7 +139,6 @@ static int process_ep_req(struct mv_udc *udc, int index,
 	direction = index % 2;
 
 	curr_dtd = curr_req->head;
-	td_complete = 0;
 	actual = curr_req->req.length;
 
 	for (i = 0; i < curr_req->dtd_count; i++) {
@@ -412,11 +411,8 @@ static int req_to_dtd(struct mv_req *req)
 	unsigned count;
 	int is_last, is_first = 1;
 	struct mv_dtd *dtd, *last_dtd = NULL;
-	struct mv_udc *udc;
 	dma_addr_t dma;
 
-	udc = req->ep->udc;
-
 	do {
 		dtd = build_dtd(req, &count, &dma, &is_last);
 		if (dtd == NULL)
@@ -567,7 +563,7 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	struct mv_udc *udc;
 	struct mv_ep *ep;
 	struct mv_dqh *dqh;
-	u32 bit_pos, epctrlx, direction;
+	u32 epctrlx, direction;
 	unsigned long flags;
 
 	ep = container_of(_ep, struct mv_ep, ep);
@@ -582,7 +578,6 @@ static int  mv_ep_disable(struct usb_ep *_ep)
 	spin_lock_irqsave(&udc->lock, flags);
 
 	direction = ep_dir(ep);
-	bit_pos = 1 << ((direction == EP_DIR_OUT ? 0 : 16) + ep->ep_num);
 
 	/* Reset the max packet length and the interrupt on Setup */
 	dqh->max_packet_length = 0;

drivers/usb/gadget/udc/net2272.c

@@ -329,12 +329,10 @@ static int net2272_disable(struct usb_ep *_ep)
 static struct usb_request *
 net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 {
-	struct net2272_ep *ep;
 	struct net2272_request *req;
 
 	if (!_ep)
 		return NULL;
-	ep = container_of(_ep, struct net2272_ep, ep);
 
 	req = kzalloc(sizeof(*req), gfp_flags);
 	if (!req)
@@ -348,10 +346,8 @@ net2272_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 static void
 net2272_free_request(struct usb_ep *_ep, struct usb_request *_req)
 {
-	struct net2272_ep *ep;
 	struct net2272_request *req;
 
-	ep = container_of(_ep, struct net2272_ep, ep);
 	if (!_ep || !_req)
 		return;
 

drivers/usb/gadget/udc/net2280.c

@@ -211,7 +211,7 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 		goto print_err;
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		if ((desc->bEndpointAddress & 0x0f) >= 0x0c) {
 			ret = -EDOM;
 			goto print_err;
@@ -245,7 +245,7 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 	/* set type, direction, address; reset fifo counters */
 	writel(BIT(FIFO_FLUSH), &ep->regs->ep_stat);
 
-	if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) {
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
 		tmp = readl(&ep->cfg->ep_cfg);
 		/* If USB ep number doesn't match hardware ep number */
 		if ((tmp & 0xf) != usb_endpoint_num(desc)) {
@@ -316,7 +316,7 @@ net2280_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
 			BIT(CLEAR_NAK_OUT_PACKETS_MODE), &ep->regs->ep_rsp);
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		ep_clear_seqnum(ep);
 	writel(tmp, &ep->cfg->ep_cfg);
 
@@ -527,7 +527,7 @@ static int net2280_disable(struct usb_ep *_ep)
 	spin_lock_irqsave(&ep->dev->lock, flags);
 	nuke(ep);
 
-	if (ep->dev->quirks & PLX_SUPERSPEED)
+	if (ep->dev->quirks & PLX_PCIE)
 		ep_reset_338x(ep->dev->regs, ep);
 	else
 		ep_reset_228x(ep->dev->regs, ep);
@@ -862,7 +862,7 @@ static void start_queue(struct net2280_ep *ep, u32 dmactl, u32 td_dma)
 	writel(readl(&dma->dmastat), &dma->dmastat);
 
 	writel(td_dma, &dma->dmadesc);
-	if (ep->dev->quirks & PLX_SUPERSPEED)
+	if (ep->dev->quirks & PLX_PCIE)
 		dmactl |= BIT(DMA_REQUEST_OUTSTANDING);
 	writel(dmactl, &dma->dmactl);
 
@@ -1046,7 +1046,7 @@ net2280_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
 	/* kickstart this i/o queue? */
 	if  (list_empty(&ep->queue) && !ep->stopped &&
-		!((dev->quirks & PLX_SUPERSPEED) && ep->dma &&
+		!((dev->quirks & PLX_PCIE) && ep->dma &&
 		  (readl(&ep->regs->ep_rsp) & BIT(CLEAR_ENDPOINT_HALT)))) {
 
 		/* use DMA if the endpoint supports it, else pio */
@@ -1169,7 +1169,7 @@ static void scan_dma_completions(struct net2280_ep *ep)
 			break;
 		} else if (!ep->is_in &&
 			   (req->req.length % ep->ep.maxpacket) &&
-			   !(ep->dev->quirks & PLX_SUPERSPEED)) {
+			   !(ep->dev->quirks & PLX_PCIE)) {
 
 			tmp = readl(&ep->regs->ep_stat);
 			/* AVOID TROUBLE HERE by not issuing short reads from
@@ -1367,7 +1367,7 @@ net2280_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedged)
 				ep->wedged = 1;
 		} else {
 			clear_halt(ep);
-			if (ep->dev->quirks & PLX_SUPERSPEED &&
+			if (ep->dev->quirks & PLX_PCIE &&
 				!list_empty(&ep->queue) && ep->td_dma)
 					restart_dma(ep);
 			ep->wedged = 0;
@@ -2394,7 +2394,7 @@ static int net2280_start(struct usb_gadget *_gadget,
 	 */
 	net2280_led_active(dev, 1);
 
-	if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched)
+	if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
 		defect7374_enable_data_eps_zero(dev);
 
 	ep0_start(dev);
@@ -3063,7 +3063,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
 		}
 		ep->stopped = 0;
 		dev->protocol_stall = 0;
-		if (!(dev->quirks & PLX_SUPERSPEED)) {
+		if (!(dev->quirks & PLX_PCIE)) {
 			if (ep->dev->quirks & PLX_2280)
 				tmp = BIT(FIFO_OVERFLOW) |
 				    BIT(FIFO_UNDERFLOW);
@@ -3090,7 +3090,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
 		cpu_to_le32s(&u.raw[0]);
 		cpu_to_le32s(&u.raw[1]);
 
-		if ((dev->quirks & PLX_SUPERSPEED) && !dev->bug7734_patched)
+		if ((dev->quirks & PLX_PCIE) && !dev->bug7734_patched)
 			defect7374_workaround(dev, u.r);
 
 		tmp = 0;
@@ -3173,7 +3173,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
 			} else {
 				ep_vdbg(dev, "%s clear halt\n", e->ep.name);
 				clear_halt(e);
-				if ((ep->dev->quirks & PLX_SUPERSPEED) &&
+				if ((ep->dev->quirks & PLX_PCIE) &&
 					!list_empty(&e->queue) && e->td_dma)
 						restart_dma(e);
 			}
@@ -3195,7 +3195,7 @@ static void handle_stat0_irqs(struct net2280 *dev, u32 stat)
 			if (e->ep.name == ep0name)
 				goto do_stall;
 			set_halt(e);
-			if ((dev->quirks & PLX_SUPERSPEED) && e->dma)
+			if ((dev->quirks & PLX_PCIE) && e->dma)
 				abort_dma(e);
 			allow_status(ep);
 			ep_vdbg(dev, "%s set halt\n", ep->ep.name);
@@ -3234,7 +3234,7 @@ do_stall:
 #undef	w_length
 
 next_endpoints:
-	if ((dev->quirks & PLX_SUPERSPEED) && dev->enhanced_mode) {
+	if ((dev->quirks & PLX_PCIE) && dev->enhanced_mode) {
 		u32 mask = (BIT(ENDPOINT_0_INTERRUPT) |
 			USB3380_IRQSTAT0_EP_INTR_MASK_IN |
 			USB3380_IRQSTAT0_EP_INTR_MASK_OUT);
@@ -3399,7 +3399,7 @@ __acquires(dev->lock)
 		writel(tmp, &dma->dmastat);
 
 		/* dma sync*/
-		if (dev->quirks & PLX_SUPERSPEED) {
+		if (dev->quirks & PLX_PCIE) {
 			u32 r_dmacount = readl(&dma->dmacount);
 			if (!ep->is_in &&  (r_dmacount & 0x00FFFFFF) &&
 			    (tmp & BIT(DMA_TRANSACTION_DONE_INTERRUPT)))
@@ -3468,7 +3468,7 @@ static irqreturn_t net2280_irq(int irq, void *_dev)
 	/* control requests and PIO */
 	handle_stat0_irqs(dev, readl(&dev->regs->irqstat0));
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		/* re-enable interrupt to trigger any possible new interrupt */
 		u32 pciirqenb1 = readl(&dev->regs->pciirqenb1);
 		writel(pciirqenb1 & 0x7FFFFFFF, &dev->regs->pciirqenb1);
@@ -3513,7 +3513,7 @@ static void net2280_remove(struct pci_dev *pdev)
 	}
 	if (dev->got_irq)
 		free_irq(pdev->irq, dev);
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		pci_disable_msi(pdev);
 	if (dev->regs)
 		iounmap(dev->regs);
@@ -3593,7 +3593,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	dev->dep = (struct net2280_dep_regs __iomem *) (base + 0x0200);
 	dev->epregs = (struct net2280_ep_regs __iomem *) (base + 0x0300);
 
-	if (dev->quirks & PLX_SUPERSPEED) {
+	if (dev->quirks & PLX_PCIE) {
 		u32 fsmvalue;
 		u32 usbstat;
 		dev->usb_ext = (struct usb338x_usb_ext_regs __iomem *)
@@ -3637,7 +3637,7 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto done;
 	}
 
-	if (dev->quirks & PLX_SUPERSPEED)
+	if (dev->quirks & PLX_PCIE)
 		if (pci_enable_msi(pdev))
 			ep_err(dev, "Failed to enable MSI mode\n");
 
@@ -3755,10 +3755,19 @@ static const struct pci_device_id pci_ids[] = { {
 	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
 	.class_mask =	~0,
 	.vendor =	PCI_VENDOR_ID_PLX,
+	.device =	0x2380,
+	.subvendor =	PCI_ANY_ID,
+	.subdevice =	PCI_ANY_ID,
+	.driver_data =	PLX_PCIE,
+	 },
+	{
+	.class =	((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
+	.class_mask =	~0,
+	.vendor =	PCI_VENDOR_ID_PLX,
 	.device =	0x3380,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
-	.driver_data =	PLX_SUPERSPEED,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
 	 },
 	{
 	.class =	PCI_CLASS_SERIAL_USB_DEVICE,
@@ -3767,7 +3776,7 @@ static const struct pci_device_id pci_ids[] = { {
 	.device =	0x3382,
 	.subvendor =	PCI_ANY_ID,
 	.subdevice =	PCI_ANY_ID,
-	.driver_data =	PLX_SUPERSPEED,
+	.driver_data =	PLX_PCIE | PLX_SUPERSPEED,
 	 },
 { /* end: all zeroes */ }
 };

drivers/usb/gadget/udc/net2280.h

@@ -47,6 +47,7 @@ set_idx_reg(struct net2280_regs __iomem *regs, u32 index, u32 value)
 #define PLX_LEGACY		BIT(0)
 #define PLX_2280		BIT(1)
 #define PLX_SUPERSPEED		BIT(2)
+#define PLX_PCIE		BIT(3)
 
 #define REG_DIAG		0x0
 #define     RETRY_COUNTER                                       16

drivers/usb/gadget/udc/pch_udc.c

@@ -1477,11 +1477,11 @@ static void complete_req(struct pch_udc_ep *ep, struct pch_udc_request *req,
 		req->dma_mapped = 0;
 	}
 	ep->halted = 1;
-	spin_lock(&dev->lock);
+	spin_unlock(&dev->lock);
 	if (!ep->in)
 		pch_udc_ep_clear_rrdy(ep);
 	usb_gadget_giveback_request(&ep->ep, &req->req);
-	spin_unlock(&dev->lock);
+	spin_lock(&dev->lock);
 	ep->halted = halted;
 }
 
@@ -1984,9 +1984,8 @@ static int pch_udc_pcd_set_halt(struct usb_ep *usbep, int halt)
 			if (ep->num == PCH_UDC_EP0)
 				ep->dev->stall = 1;
 			pch_udc_ep_set_stall(ep);
-			pch_udc_enable_ep_interrupts(ep->dev,
-						     PCH_UDC_EPINT(ep->in,
-								   ep->num));
+			pch_udc_enable_ep_interrupts(
+				ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
 		} else {
 			pch_udc_ep_clear_stall(ep);
 		}
@@ -2451,16 +2450,11 @@ static void pch_udc_svc_control_out(struct pch_udc_dev *dev)
  */
 static void pch_udc_postsvc_epinters(struct pch_udc_dev *dev, int ep_num)
 {
-	struct pch_udc_ep	*ep;
-	struct pch_udc_request *req;
-
-	ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
-	if (!list_empty(&ep->queue)) {
-		req = list_entry(ep->queue.next, struct pch_udc_request, queue);
-		pch_udc_enable_ep_interrupts(ep->dev,
-					     PCH_UDC_EPINT(ep->in, ep->num));
-		pch_udc_ep_clear_nak(ep);
-	}
+	struct pch_udc_ep	*ep = &dev->ep[UDC_EPIN_IDX(ep_num)];
+	if (list_empty(&ep->queue))
+		return;
+	pch_udc_enable_ep_interrupts(ep->dev, PCH_UDC_EPINT(ep->in, ep->num));
+	pch_udc_ep_clear_nak(ep);
 }
 
 /**
@@ -2573,9 +2567,9 @@ static void pch_udc_svc_ur_interrupt(struct pch_udc_dev *dev)
 		empty_req_queue(ep);
 	}
 	if (dev->driver) {
-		spin_lock(&dev->lock);
-		usb_gadget_udc_reset(&dev->gadget, dev->driver);
 		spin_unlock(&dev->lock);
+		usb_gadget_udc_reset(&dev->gadget, dev->driver);
+		spin_lock(&dev->lock);
 	}
 }
 
@@ -2654,9 +2648,9 @@ static void pch_udc_svc_intf_interrupt(struct pch_udc_dev *dev)
 		dev->ep[i].halted = 0;
 	}
 	dev->stall = 0;
-	spin_lock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
 	spin_unlock(&dev->lock);
+	dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
 }
 
 /**
@@ -2691,9 +2685,9 @@ static void pch_udc_svc_cfg_interrupt(struct pch_udc_dev *dev)
 	dev->stall = 0;
 
 	/* call gadget zero with setup data received */
-	spin_lock(&dev->lock);
-	dev->driver->setup(&dev->gadget, &dev->setup_data);
 	spin_unlock(&dev->lock);
+	dev->driver->setup(&dev->gadget, &dev->setup_data);
+	spin_lock(&dev->lock);
 }
 
 /**

drivers/usb/gadget/udc/pxa27x_udc.c

@@ -1825,13 +1825,10 @@ fail:
  * Disables all udc endpoints (even control endpoint), report disconnect to
  * the gadget user.
  */
-static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
+static void stop_activity(struct pxa_udc *udc)
 {
 	int i;
 
-	/* don't disconnect drivers more than once */
-	if (udc->gadget.speed == USB_SPEED_UNKNOWN)
-		driver = NULL;
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
 
 	for (i = 0; i < NR_USB_ENDPOINTS; i++)
@@ -1848,7 +1845,7 @@ static int pxa27x_udc_stop(struct usb_gadget *g)
 {
 	struct pxa_udc *udc = to_pxa(g);
 
-	stop_activity(udc, NULL);
+	stop_activity(udc);
 	udc_disable(udc);
 
 	udc->driver = NULL;
@@ -2296,7 +2293,7 @@ static void irq_udc_reset(struct pxa_udc *udc)
 
 	if ((udccr & UDCCR_UDA) == 0) {
 		dev_dbg(udc->dev, "USB reset start\n");
-		stop_activity(udc, udc->driver);
+		stop_activity(udc);
 	}
 	udc->gadget.speed = USB_SPEED_FULL;
 	memset(&udc->stats, 0, sizeof udc->stats);

drivers/usb/gadget/udc/r8a66597-udc.c

@@ -1464,8 +1464,6 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 	struct r8a66597 *r8a66597 = _r8a66597;
 	u16 intsts0;
 	u16 intenb0;
-	u16 brdysts, nrdysts, bempsts;
-	u16 brdyenb, nrdyenb, bempenb;
 	u16 savepipe;
 	u16 mask0;
 
@@ -1481,12 +1479,10 @@ static irqreturn_t r8a66597_irq(int irq, void *_r8a66597)
 
 	mask0 = intsts0 & intenb0;
 	if (mask0) {
-		brdysts = r8a66597_read(r8a66597, BRDYSTS);
-		nrdysts = r8a66597_read(r8a66597, NRDYSTS);
-		bempsts = r8a66597_read(r8a66597, BEMPSTS);
-		brdyenb = r8a66597_read(r8a66597, BRDYENB);
-		nrdyenb = r8a66597_read(r8a66597, NRDYENB);
-		bempenb = r8a66597_read(r8a66597, BEMPENB);
+		u16 brdysts = r8a66597_read(r8a66597, BRDYSTS);
+		u16 bempsts = r8a66597_read(r8a66597, BEMPSTS);
+		u16 brdyenb = r8a66597_read(r8a66597, BRDYENB);
+		u16 bempenb = r8a66597_read(r8a66597, BEMPENB);
 
 		if (mask0 & VBINT) {
 			r8a66597_write(r8a66597,  0xffff & ~VBINT,
@@ -1658,20 +1654,14 @@ static int r8a66597_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 
 static int r8a66597_set_halt(struct usb_ep *_ep, int value)
 {
-	struct r8a66597_ep *ep;
-	struct r8a66597_request *req;
+	struct r8a66597_ep *ep = container_of(_ep, struct r8a66597_ep, ep);
 	unsigned long flags;
 	int ret = 0;
 
-	ep = container_of(_ep, struct r8a66597_ep, ep);
-	req = get_request_from_ep(ep);
-
 	spin_lock_irqsave(&ep->r8a66597->lock, flags);
 	if (!list_empty(&ep->queue)) {
 		ret = -EAGAIN;
-		goto out;
-	}
-	if (value) {
+	} else if (value) {
 		ep->busy = 1;
 		pipe_stall(ep->r8a66597, ep->pipenum);
 	} else {
@@ -1679,8 +1669,6 @@ static int r8a66597_set_halt(struct usb_ep *_ep, int value)
 		ep->wedge = 0;
 		pipe_stop(ep->r8a66597, ep->pipenum);
 	}
-
-out:
 	spin_unlock_irqrestore(&ep->r8a66597->lock, flags);
 	return ret;
 }

drivers/usb/gadget/udc/trace.c

@@ -0,0 +1,18 @@
+/**
+ * trace.c - USB Gadget Framework Trace Support
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define CREATE_TRACE_POINTS
+#include "trace.h"

drivers/usb/gadget/udc/trace.h

@@ -0,0 +1,298 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2016 Intel Corporation
+ * Author: Felipe Balbi <felipe.balbi@linux.intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2  of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM gadget
+
+#if !defined(__UDC_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define __UDC_TRACE_H
+
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+#include <asm/byteorder.h>
+#include <linux/usb/gadget.h>
+
+DECLARE_EVENT_CLASS(udc_log_gadget,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret),
+	TP_STRUCT__entry(
+		__field(enum usb_device_speed, speed)
+		__field(enum usb_device_speed, max_speed)
+		__field(enum usb_device_state, state)
+		__field(unsigned, mA)
+		__field(unsigned, sg_supported)
+		__field(unsigned, is_otg)
+		__field(unsigned, is_a_peripheral)
+		__field(unsigned, b_hnp_enable)
+		__field(unsigned, a_hnp_support)
+		__field(unsigned, hnp_polling_support)
+		__field(unsigned, host_request_flag)
+		__field(unsigned, quirk_ep_out_aligned_size)
+		__field(unsigned, quirk_altset_not_supp)
+		__field(unsigned, quirk_stall_not_supp)
+		__field(unsigned, quirk_zlp_not_supp)
+		__field(unsigned, is_selfpowered)
+		__field(unsigned, deactivated)
+		__field(unsigned, connected)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		__entry->speed = g->speed;
+		__entry->max_speed = g->max_speed;
+		__entry->state = g->state;
+		__entry->mA = g->mA;
+		__entry->sg_supported = g->sg_supported;
+		__entry->is_otg = g->is_otg;
+		__entry->is_a_peripheral = g->is_a_peripheral;
+		__entry->b_hnp_enable = g->b_hnp_enable;
+		__entry->a_hnp_support = g->a_hnp_support;
+		__entry->hnp_polling_support = g->hnp_polling_support;
+		__entry->host_request_flag = g->host_request_flag;
+		__entry->quirk_ep_out_aligned_size = g->quirk_ep_out_aligned_size;
+		__entry->quirk_altset_not_supp = g->quirk_altset_not_supp;
+		__entry->quirk_stall_not_supp = g->quirk_stall_not_supp;
+		__entry->quirk_zlp_not_supp = g->quirk_zlp_not_supp;
+		__entry->is_selfpowered = g->is_selfpowered;
+		__entry->deactivated = g->deactivated;
+		__entry->connected = g->connected;
+		__entry->ret = ret;
+	),
+	TP_printk("speed %d/%d state %d %dmA [%s%s%s%s%s%s%s%s%s%s%s%s%s%s] --> %d",
+		__entry->speed, __entry->max_speed, __entry->state, __entry->mA,
+		__entry->sg_supported ? "sg:" : "",
+		__entry->is_otg ? "OTG:" : "",
+		__entry->is_a_peripheral ? "a_peripheral:" : "",
+		__entry->b_hnp_enable ? "b_hnp:" : "",
+		__entry->a_hnp_support ? "a_hnp:" : "",
+		__entry->hnp_polling_support ? "hnp_poll:" : "",
+		__entry->host_request_flag ? "hostreq:" : "",
+		__entry->quirk_ep_out_aligned_size ? "out_aligned:" : "",
+		__entry->quirk_altset_not_supp ? "no_altset:" : "",
+		__entry->quirk_stall_not_supp ? "no_stall:" : "",
+		__entry->quirk_zlp_not_supp ? "no_zlp" : "",
+		__entry->is_selfpowered ? "self-powered:" : "bus-powered:",
+		__entry->deactivated ? "deactivated:" : "activated:",
+		__entry->connected ? "connected" : "disconnected",
+		__entry->ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_frame_number,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_clear_selfpowered,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_draw,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_vbus_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_connect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_disconnect,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_deactivate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DEFINE_EVENT(udc_log_gadget, usb_gadget_activate,
+	TP_PROTO(struct usb_gadget *g, int ret),
+	TP_ARGS(g, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_ep,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret),
+	TP_STRUCT__entry(
+		__dynamic_array(char, name, UDC_TRACE_STR_MAX)
+		__field(unsigned, maxpacket)
+		__field(unsigned, maxpacket_limit)
+		__field(unsigned, max_streams)
+		__field(unsigned, mult)
+		__field(unsigned, maxburst)
+		__field(u8, address)
+		__field(bool, claimed)
+		__field(bool, enabled)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		snprintf(__get_str(name), UDC_TRACE_STR_MAX, "%s", ep->name);
+		__entry->maxpacket = ep->maxpacket;
+		__entry->maxpacket_limit = ep->maxpacket_limit;
+		__entry->max_streams = ep->max_streams;
+		__entry->mult = ep->mult;
+		__entry->maxburst = ep->maxburst;
+		__entry->address = ep->address,
+		__entry->claimed = ep->claimed;
+		__entry->enabled = ep->enabled;
+		__entry->ret = ret;
+	),
+	TP_printk("%s: mps %d/%d streams %d mult %d burst %d addr %02x %s%s --> %d",
+		__get_str(name), __entry->maxpacket, __entry->maxpacket_limit,
+		__entry->max_streams, __entry->mult, __entry->maxburst,
+		__entry->address, __entry->claimed ? "claimed:" : "released:",
+		__entry->enabled ? "enabled" : "disabled", ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_maxpacket_limit,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_enable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_disable,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_clear_halt,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_set_wedge,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_status,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DEFINE_EVENT(udc_log_ep, usb_ep_fifo_flush,
+	TP_PROTO(struct usb_ep *ep, int ret),
+	TP_ARGS(ep, ret)
+);
+
+DECLARE_EVENT_CLASS(udc_log_req,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret),
+	TP_STRUCT__entry(
+		__dynamic_array(char, name, UDC_TRACE_STR_MAX)
+		__field(unsigned, length)
+		__field(unsigned, actual)
+		__field(unsigned, num_sgs)
+		__field(unsigned, num_mapped_sgs)
+		__field(unsigned, stream_id)
+		__field(unsigned, no_interrupt)
+		__field(unsigned, zero)
+		__field(unsigned, short_not_ok)
+		__field(int, status)
+		__field(int, ret)
+	),
+	TP_fast_assign(
+		snprintf(__get_str(name), UDC_TRACE_STR_MAX, "%s", ep->name);
+		__entry->length = req->length;
+		__entry->actual = req->actual;
+		__entry->num_sgs = req->num_sgs;
+		__entry->num_mapped_sgs = req->num_mapped_sgs;
+		__entry->stream_id = req->stream_id;
+		__entry->no_interrupt = req->no_interrupt;
+		__entry->zero = req->zero;
+		__entry->short_not_ok = req->short_not_ok;
+		__entry->status = req->status;
+		__entry->ret = ret;
+	),
+	TP_printk("%s: length %d/%d sgs %d/%d stream %d %s%s%s status %d --> %d",
+		__get_str(name), __entry->actual, __entry->length,
+		__entry->num_mapped_sgs, __entry->num_sgs, __entry->stream_id,
+		__entry->zero ? "Z" : "z",
+		__entry->short_not_ok ? "S" : "s",
+		__entry->no_interrupt ? "i" : "I",
+		__entry->status, __entry->ret
+	)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_alloc_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_free_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_queue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_ep_dequeue,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+DEFINE_EVENT(udc_log_req, usb_gadget_giveback_request,
+	TP_PROTO(struct usb_ep *ep, struct usb_request *req, int ret),
+	TP_ARGS(ep, req, ret)
+);
+
+#endif /* __UDC_TRACE_H */
+
+/* this part has to be here */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE trace
+
+#include <trace/define_trace.h>

drivers/usb/gadget/udc/udc-core.c

@@ -1,800 +0,0 @@
-/**
- * udc.c - Core UDC Framework
- *
- * Copyright (C) 2010 Texas Instruments
- * Author: Felipe Balbi <balbi@ti.com>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2  of
- * the License as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/err.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-
-/**
- * struct usb_udc - describes one usb device controller
- * @driver - the gadget driver pointer. For use by the class code
- * @dev - the child device to the actual controller
- * @gadget - the gadget. For use by the class code
- * @list - for use by the udc class driver
- * @vbus - for udcs who care about vbus status, this value is real vbus status;
- * for udcs who do not care about vbus status, this value is always true
- *
- * This represents the internal data structure which is used by the UDC-class
- * to hold information about udc driver and gadget together.
- */
-struct usb_udc {
-	struct usb_gadget_driver	*driver;
-	struct usb_gadget		*gadget;
-	struct device			dev;
-	struct list_head		list;
-	bool				vbus;
-};
-
-static struct class *udc_class;
-static LIST_HEAD(udc_list);
-static LIST_HEAD(gadget_driver_pending_list);
-static DEFINE_MUTEX(udc_lock);
-
-static int udc_bind_to_driver(struct usb_udc *udc,
-		struct usb_gadget_driver *driver);
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef	CONFIG_HAS_DMA
-
-int usb_gadget_map_request_by_dev(struct device *dev,
-		struct usb_request *req, int is_in)
-{
-	if (req->length == 0)
-		return 0;
-
-	if (req->num_sgs) {
-		int     mapped;
-
-		mapped = dma_map_sg(dev, req->sg, req->num_sgs,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-		if (mapped == 0) {
-			dev_err(dev, "failed to map SGs\n");
-			return -EFAULT;
-		}
-
-		req->num_mapped_sgs = mapped;
-	} else {
-		req->dma = dma_map_single(dev, req->buf, req->length,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
-		if (dma_mapping_error(dev, req->dma)) {
-			dev_err(dev, "failed to map buffer\n");
-			return -EFAULT;
-		}
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_map_request_by_dev);
-
-int usb_gadget_map_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in)
-{
-	return usb_gadget_map_request_by_dev(gadget->dev.parent, req, is_in);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_map_request);
-
-void usb_gadget_unmap_request_by_dev(struct device *dev,
-		struct usb_request *req, int is_in)
-{
-	if (req->length == 0)
-		return;
-
-	if (req->num_mapped_sgs) {
-		dma_unmap_sg(dev, req->sg, req->num_mapped_sgs,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-
-		req->num_mapped_sgs = 0;
-	} else {
-		dma_unmap_single(dev, req->dma, req->length,
-				is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
-	}
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unmap_request_by_dev);
-
-void usb_gadget_unmap_request(struct usb_gadget *gadget,
-		struct usb_request *req, int is_in)
-{
-	usb_gadget_unmap_request_by_dev(gadget->dev.parent, req, is_in);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
-
-#endif	/* CONFIG_HAS_DMA */
-
-/* ------------------------------------------------------------------------- */
-
-/**
- * usb_gadget_giveback_request - give the request back to the gadget layer
- * Context: in_interrupt()
- *
- * This is called by device controller drivers in order to return the
- * completed request back to the gadget layer.
- */
-void usb_gadget_giveback_request(struct usb_ep *ep,
-		struct usb_request *req)
-{
-	if (likely(req->status == 0))
-		usb_led_activity(USB_LED_EVENT_GADGET);
-
-	req->complete(ep, req);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_giveback_request);
-
-/* ------------------------------------------------------------------------- */
-
-/**
- * gadget_find_ep_by_name - returns ep whose name is the same as sting passed
- *	in second parameter or NULL if searched endpoint not found
- * @g: controller to check for quirk
- * @name: name of searched endpoint
- */
-struct usb_ep *gadget_find_ep_by_name(struct usb_gadget *g, const char *name)
-{
-	struct usb_ep *ep;
-
-	gadget_for_each_ep(ep, g) {
-		if (!strcmp(ep->name, name))
-			return ep;
-	}
-
-	return NULL;
-}
-EXPORT_SYMBOL_GPL(gadget_find_ep_by_name);
-
-/* ------------------------------------------------------------------------- */
-
-int usb_gadget_ep_match_desc(struct usb_gadget *gadget,
-		struct usb_ep *ep, struct usb_endpoint_descriptor *desc,
-		struct usb_ss_ep_comp_descriptor *ep_comp)
-{
-	u8		type;
-	u16		max;
-	int		num_req_streams = 0;
-
-	/* endpoint already claimed? */
-	if (ep->claimed)
-		return 0;
-
-	type = usb_endpoint_type(desc);
-	max = 0x7ff & usb_endpoint_maxp(desc);
-
-	if (usb_endpoint_dir_in(desc) && !ep->caps.dir_in)
-		return 0;
-	if (usb_endpoint_dir_out(desc) && !ep->caps.dir_out)
-		return 0;
-
-	if (max > ep->maxpacket_limit)
-		return 0;
-
-	/* "high bandwidth" works only at high speed */
-	if (!gadget_is_dualspeed(gadget) && usb_endpoint_maxp(desc) & (3<<11))
-		return 0;
-
-	switch (type) {
-	case USB_ENDPOINT_XFER_CONTROL:
-		/* only support ep0 for portable CONTROL traffic */
-		return 0;
-	case USB_ENDPOINT_XFER_ISOC:
-		if (!ep->caps.type_iso)
-			return 0;
-		/* ISO:  limit 1023 bytes full speed, 1024 high/super speed */
-		if (!gadget_is_dualspeed(gadget) && max > 1023)
-			return 0;
-		break;
-	case USB_ENDPOINT_XFER_BULK:
-		if (!ep->caps.type_bulk)
-			return 0;
-		if (ep_comp && gadget_is_superspeed(gadget)) {
-			/* Get the number of required streams from the
-			 * EP companion descriptor and see if the EP
-			 * matches it
-			 */
-			num_req_streams = ep_comp->bmAttributes & 0x1f;
-			if (num_req_streams > ep->max_streams)
-				return 0;
-		}
-		break;
-	case USB_ENDPOINT_XFER_INT:
-		/* Bulk endpoints handle interrupt transfers,
-		 * except the toggle-quirky iso-synch kind
-		 */
-		if (!ep->caps.type_int && !ep->caps.type_bulk)
-			return 0;
-		/* INT:  limit 64 bytes full speed, 1024 high/super speed */
-		if (!gadget_is_dualspeed(gadget) && max > 64)
-			return 0;
-		break;
-	}
-
-	return 1;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_ep_match_desc);
-
-/* ------------------------------------------------------------------------- */
-
-static void usb_gadget_state_work(struct work_struct *work)
-{
-	struct usb_gadget *gadget = work_to_gadget(work);
-	struct usb_udc *udc = gadget->udc;
-
-	if (udc)
-		sysfs_notify(&udc->dev.kobj, NULL, "state");
-}
-
-void usb_gadget_set_state(struct usb_gadget *gadget,
-		enum usb_device_state state)
-{
-	gadget->state = state;
-	schedule_work(&gadget->work);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_set_state);
-
-/* ------------------------------------------------------------------------- */
-
-static void usb_udc_connect_control(struct usb_udc *udc)
-{
-	if (udc->vbus)
-		usb_gadget_connect(udc->gadget);
-	else
-		usb_gadget_disconnect(udc->gadget);
-}
-
-/**
- * usb_udc_vbus_handler - updates the udc core vbus status, and try to
- * connect or disconnect gadget
- * @gadget: The gadget which vbus change occurs
- * @status: The vbus status
- *
- * The udc driver calls it when it wants to connect or disconnect gadget
- * according to vbus status.
- */
-void usb_udc_vbus_handler(struct usb_gadget *gadget, bool status)
-{
-	struct usb_udc *udc = gadget->udc;
-
-	if (udc) {
-		udc->vbus = status;
-		usb_udc_connect_control(udc);
-	}
-}
-EXPORT_SYMBOL_GPL(usb_udc_vbus_handler);
-
-/**
- * usb_gadget_udc_reset - notifies the udc core that bus reset occurs
- * @gadget: The gadget which bus reset occurs
- * @driver: The gadget driver we want to notify
- *
- * If the udc driver has bus reset handler, it needs to call this when the bus
- * reset occurs, it notifies the gadget driver that the bus reset occurs as
- * well as updates gadget state.
- */
-void usb_gadget_udc_reset(struct usb_gadget *gadget,
-		struct usb_gadget_driver *driver)
-{
-	driver->reset(gadget);
-	usb_gadget_set_state(gadget, USB_STATE_DEFAULT);
-}
-EXPORT_SYMBOL_GPL(usb_gadget_udc_reset);
-
-/**
- * usb_gadget_udc_start - tells usb device controller to start up
- * @udc: The UDC to be started
- *
- * This call is issued by the UDC Class driver when it's about
- * to register a gadget driver to the device controller, before
- * calling gadget driver's bind() method.
- *
- * It allows the controller to be powered off until strictly
- * necessary to have it powered on.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int usb_gadget_udc_start(struct usb_udc *udc)
-{
-	return udc->gadget->ops->udc_start(udc->gadget, udc->driver);
-}
-
-/**
- * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
- * @gadget: The device we want to stop activity
- * @driver: The driver to unbind from @gadget
- *
- * This call is issued by the UDC Class driver after calling
- * gadget driver's unbind() method.
- *
- * The details are implementation specific, but it can go as
- * far as powering off UDC completely and disable its data
- * line pullups.
- */
-static inline void usb_gadget_udc_stop(struct usb_udc *udc)
-{
-	udc->gadget->ops->udc_stop(udc->gadget);
-}
-
-/**
- * usb_udc_release - release the usb_udc struct
- * @dev: the dev member within usb_udc
- *
- * This is called by driver's core in order to free memory once the last
- * reference is released.
- */
-static void usb_udc_release(struct device *dev)
-{
-	struct usb_udc *udc;
-
-	udc = container_of(dev, struct usb_udc, dev);
-	dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
-	kfree(udc);
-}
-
-static const struct attribute_group *usb_udc_attr_groups[];
-
-static void usb_udc_nop_release(struct device *dev)
-{
-	dev_vdbg(dev, "%s\n", __func__);
-}
-
-/**
- * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
- * @parent: the parent device to this udc. Usually the controller driver's
- * device.
- * @gadget: the gadget to be added to the list.
- * @release: a gadget release function.
- *
- * Returns zero on success, negative errno otherwise.
- */
-int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
-		void (*release)(struct device *dev))
-{
-	struct usb_udc		*udc;
-	struct usb_gadget_driver *driver;
-	int			ret = -ENOMEM;
-
-	udc = kzalloc(sizeof(*udc), GFP_KERNEL);
-	if (!udc)
-		goto err1;
-
-	dev_set_name(&gadget->dev, "gadget");
-	INIT_WORK(&gadget->work, usb_gadget_state_work);
-	gadget->dev.parent = parent;
-
-	if (release)
-		gadget->dev.release = release;
-	else
-		gadget->dev.release = usb_udc_nop_release;
-
-	ret = device_register(&gadget->dev);
-	if (ret)
-		goto err2;
-
-	device_initialize(&udc->dev);
-	udc->dev.release = usb_udc_release;
-	udc->dev.class = udc_class;
-	udc->dev.groups = usb_udc_attr_groups;
-	udc->dev.parent = parent;
-	ret = dev_set_name(&udc->dev, "%s", kobject_name(&parent->kobj));
-	if (ret)
-		goto err3;
-
-	udc->gadget = gadget;
-	gadget->udc = udc;
-
-	mutex_lock(&udc_lock);
-	list_add_tail(&udc->list, &udc_list);
-
-	ret = device_add(&udc->dev);
-	if (ret)
-		goto err4;
-
-	usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
-	udc->vbus = true;
-
-	/* pick up one of pending gadget drivers */
-	list_for_each_entry(driver, &gadget_driver_pending_list, pending) {
-		if (!driver->udc_name || strcmp(driver->udc_name,
-						dev_name(&udc->dev)) == 0) {
-			ret = udc_bind_to_driver(udc, driver);
-			if (ret != -EPROBE_DEFER)
-				list_del(&driver->pending);
-			if (ret)
-				goto err4;
-			break;
-		}
-	}
-
-	mutex_unlock(&udc_lock);
-
-	return 0;
-
-err4:
-	list_del(&udc->list);
-	mutex_unlock(&udc_lock);
-
-err3:
-	put_device(&udc->dev);
-	device_del(&gadget->dev);
-
-err2:
-	put_device(&gadget->dev);
-	kfree(udc);
-
-err1:
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
-
-/**
- * usb_get_gadget_udc_name - get the name of the first UDC controller
- * This functions returns the name of the first UDC controller in the system.
- * Please note that this interface is usefull only for legacy drivers which
- * assume that there is only one UDC controller in the system and they need to
- * get its name before initialization. There is no guarantee that the UDC
- * of the returned name will be still available, when gadget driver registers
- * itself.
- *
- * Returns pointer to string with UDC controller name on success, NULL
- * otherwise. Caller should kfree() returned string.
- */
-char *usb_get_gadget_udc_name(void)
-{
-	struct usb_udc *udc;
-	char *name = NULL;
-
-	/* For now we take the first available UDC */
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list) {
-		if (!udc->driver) {
-			name = kstrdup(udc->gadget->name, GFP_KERNEL);
-			break;
-		}
-	}
-	mutex_unlock(&udc_lock);
-	return name;
-}
-EXPORT_SYMBOL_GPL(usb_get_gadget_udc_name);
-
-/**
- * usb_add_gadget_udc - adds a new gadget to the udc class driver list
- * @parent: the parent device to this udc. Usually the controller
- * driver's device.
- * @gadget: the gadget to be added to the list
- *
- * Returns zero on success, negative errno otherwise.
- */
-int usb_add_gadget_udc(struct device *parent, struct usb_gadget *gadget)
-{
-	return usb_add_gadget_udc_release(parent, gadget, NULL);
-}
-EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
-
-static void usb_gadget_remove_driver(struct usb_udc *udc)
-{
-	dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
-			udc->driver->function);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
-
-	usb_gadget_disconnect(udc->gadget);
-	udc->driver->disconnect(udc->gadget);
-	udc->driver->unbind(udc->gadget);
-	usb_gadget_udc_stop(udc);
-
-	udc->driver = NULL;
-	udc->dev.driver = NULL;
-	udc->gadget->dev.driver = NULL;
-}
-
-/**
- * usb_del_gadget_udc - deletes @udc from udc_list
- * @gadget: the gadget to be removed.
- *
- * This, will call usb_gadget_unregister_driver() if
- * the @udc is still busy.
- */
-void usb_del_gadget_udc(struct usb_gadget *gadget)
-{
-	struct usb_udc *udc = gadget->udc;
-
-	if (!udc)
-		return;
-
-	dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
-
-	mutex_lock(&udc_lock);
-	list_del(&udc->list);
-
-	if (udc->driver) {
-		struct usb_gadget_driver *driver = udc->driver;
-
-		usb_gadget_remove_driver(udc);
-		list_add(&driver->pending, &gadget_driver_pending_list);
-	}
-	mutex_unlock(&udc_lock);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_REMOVE);
-	flush_work(&gadget->work);
-	device_unregister(&udc->dev);
-	device_unregister(&gadget->dev);
-}
-EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
-
-/* ------------------------------------------------------------------------- */
-
-static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
-{
-	int ret;
-
-	dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
-			driver->function);
-
-	udc->driver = driver;
-	udc->dev.driver = &driver->driver;
-	udc->gadget->dev.driver = &driver->driver;
-
-	ret = driver->bind(udc->gadget, driver);
-	if (ret)
-		goto err1;
-	ret = usb_gadget_udc_start(udc);
-	if (ret) {
-		driver->unbind(udc->gadget);
-		goto err1;
-	}
-	usb_udc_connect_control(udc);
-
-	kobject_uevent(&udc->dev.kobj, KOBJ_CHANGE);
-	return 0;
-err1:
-	if (ret != -EISNAM)
-		dev_err(&udc->dev, "failed to start %s: %d\n",
-			udc->driver->function, ret);
-	udc->driver = NULL;
-	udc->dev.driver = NULL;
-	udc->gadget->dev.driver = NULL;
-	return ret;
-}
-
-int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
-{
-	struct usb_udc		*udc = NULL;
-	int			ret = -ENODEV;
-
-	if (!driver || !driver->bind || !driver->setup)
-		return -EINVAL;
-
-	mutex_lock(&udc_lock);
-	if (driver->udc_name) {
-		list_for_each_entry(udc, &udc_list, list) {
-			ret = strcmp(driver->udc_name, dev_name(&udc->dev));
-			if (!ret)
-				break;
-		}
-		if (!ret && !udc->driver)
-			goto found;
-	} else {
-		list_for_each_entry(udc, &udc_list, list) {
-			/* For now we take the first one */
-			if (!udc->driver)
-				goto found;
-		}
-	}
-
-	if (!driver->match_existing_only) {
-		list_add_tail(&driver->pending, &gadget_driver_pending_list);
-		pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n",
-			driver->function);
-		ret = 0;
-	}
-
-	mutex_unlock(&udc_lock);
-	return ret;
-found:
-	ret = udc_bind_to_driver(udc, driver);
-	mutex_unlock(&udc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
-
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
-{
-	struct usb_udc		*udc = NULL;
-	int			ret = -ENODEV;
-
-	if (!driver || !driver->unbind)
-		return -EINVAL;
-
-	mutex_lock(&udc_lock);
-	list_for_each_entry(udc, &udc_list, list)
-		if (udc->driver == driver) {
-			usb_gadget_remove_driver(udc);
-			usb_gadget_set_state(udc->gadget,
-					USB_STATE_NOTATTACHED);
-			ret = 0;
-			break;
-		}
-
-	if (ret) {
-		list_del(&driver->pending);
-		ret = 0;
-	}
-	mutex_unlock(&udc_lock);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
-
-/* ------------------------------------------------------------------------- */
-
-static ssize_t usb_udc_srp_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-
-	if (sysfs_streq(buf, "1"))
-		usb_gadget_wakeup(udc->gadget);
-
-	return n;
-}
-static DEVICE_ATTR(srp, S_IWUSR, NULL, usb_udc_srp_store);
-
-static ssize_t usb_udc_softconn_store(struct device *dev,
-		struct device_attribute *attr, const char *buf, size_t n)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-
-	if (!udc->driver) {
-		dev_err(dev, "soft-connect without a gadget driver\n");
-		return -EOPNOTSUPP;
-	}
-
-	if (sysfs_streq(buf, "connect")) {
-		usb_gadget_udc_start(udc);
-		usb_gadget_connect(udc->gadget);
-	} else if (sysfs_streq(buf, "disconnect")) {
-		usb_gadget_disconnect(udc->gadget);
-		udc->driver->disconnect(udc->gadget);
-		usb_gadget_udc_stop(udc);
-	} else {
-		dev_err(dev, "unsupported command '%s'\n", buf);
-		return -EINVAL;
-	}
-
-	return n;
-}
-static DEVICE_ATTR(soft_connect, S_IWUSR, NULL, usb_udc_softconn_store);
-
-static ssize_t state_show(struct device *dev, struct device_attribute *attr,
-			  char *buf)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	struct usb_gadget	*gadget = udc->gadget;
-
-	return sprintf(buf, "%s\n", usb_state_string(gadget->state));
-}
-static DEVICE_ATTR_RO(state);
-
-#define USB_UDC_SPEED_ATTR(name, param)					\
-ssize_t name##_show(struct device *dev,					\
-		struct device_attribute *attr, char *buf)		\
-{									\
-	struct usb_udc *udc = container_of(dev, struct usb_udc, dev);	\
-	return snprintf(buf, PAGE_SIZE, "%s\n",				\
-			usb_speed_string(udc->gadget->param));		\
-}									\
-static DEVICE_ATTR_RO(name)
-
-static USB_UDC_SPEED_ATTR(current_speed, speed);
-static USB_UDC_SPEED_ATTR(maximum_speed, max_speed);
-
-#define USB_UDC_ATTR(name)					\
-ssize_t name##_show(struct device *dev,				\
-		struct device_attribute *attr, char *buf)	\
-{								\
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev); \
-	struct usb_gadget	*gadget = udc->gadget;		\
-								\
-	return snprintf(buf, PAGE_SIZE, "%d\n", gadget->name);	\
-}								\
-static DEVICE_ATTR_RO(name)
-
-static USB_UDC_ATTR(is_otg);
-static USB_UDC_ATTR(is_a_peripheral);
-static USB_UDC_ATTR(b_hnp_enable);
-static USB_UDC_ATTR(a_hnp_support);
-static USB_UDC_ATTR(a_alt_hnp_support);
-static USB_UDC_ATTR(is_selfpowered);
-
-static struct attribute *usb_udc_attrs[] = {
-	&dev_attr_srp.attr,
-	&dev_attr_soft_connect.attr,
-	&dev_attr_state.attr,
-	&dev_attr_current_speed.attr,
-	&dev_attr_maximum_speed.attr,
-
-	&dev_attr_is_otg.attr,
-	&dev_attr_is_a_peripheral.attr,
-	&dev_attr_b_hnp_enable.attr,
-	&dev_attr_a_hnp_support.attr,
-	&dev_attr_a_alt_hnp_support.attr,
-	&dev_attr_is_selfpowered.attr,
-	NULL,
-};
-
-static const struct attribute_group usb_udc_attr_group = {
-	.attrs = usb_udc_attrs,
-};
-
-static const struct attribute_group *usb_udc_attr_groups[] = {
-	&usb_udc_attr_group,
-	NULL,
-};
-
-static int usb_udc_uevent(struct device *dev, struct kobj_uevent_env *env)
-{
-	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
-	int			ret;
-
-	ret = add_uevent_var(env, "USB_UDC_NAME=%s", udc->gadget->name);
-	if (ret) {
-		dev_err(dev, "failed to add uevent USB_UDC_NAME\n");
-		return ret;
-	}
-
-	if (udc->driver) {
-		ret = add_uevent_var(env, "USB_UDC_DRIVER=%s",
-				udc->driver->function);
-		if (ret) {
-			dev_err(dev, "failed to add uevent USB_UDC_DRIVER\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int __init usb_udc_init(void)
-{
-	udc_class = class_create(THIS_MODULE, "udc");
-	if (IS_ERR(udc_class)) {
-		pr_err("failed to create udc class --> %ld\n",
-				PTR_ERR(udc_class));
-		return PTR_ERR(udc_class);
-	}
-
-	udc_class->dev_uevent = usb_udc_uevent;
-	return 0;
-}
-subsys_initcall(usb_udc_init);
-
-static void __exit usb_udc_exit(void)
-{
-	class_destroy(udc_class);
-}
-module_exit(usb_udc_exit);
-
-MODULE_DESCRIPTION("UDC Framework");
-MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
-MODULE_LICENSE("GPL v2");

drivers/usb/gadget/udc/udc-xilinx.c

@@ -2055,7 +2055,6 @@ static int xudc_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct resource *res;
 	struct xusb_udc *udc;
-	struct xusb_ep *ep0;
 	int irq;
 	int ret;
 	u32 ier;
@@ -2119,8 +2118,6 @@ static int xudc_probe(struct platform_device *pdev)
 
 	xudc_eps_init(udc);
 
-	ep0 = &udc->ep[0];
-
 	/* Set device address to 0.*/
 	udc->write_fn(udc->addr, XUSB_ADDRESS_OFFSET, 0);
 

drivers/usb/host/Kconfig

@@ -180,7 +180,7 @@ config USB_EHCI_MXC
 config USB_EHCI_HCD_OMAP
 	tristate "EHCI support for OMAP3 and later chips"
 	depends on ARCH_OMAP
-	select NOP_USB_XCEIV
+	depends on NOP_USB_XCEIV
 	default y
 	---help---
 	  Enables support for the on-chip EHCI controller on

drivers/usb/phy/Kconfig

@@ -21,6 +21,7 @@ config AB8500_USB
 config FSL_USB2_OTG
 	bool "Freescale USB OTG Transceiver Driver"
 	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_OTG_FSM && PM
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Enable this to support Freescale USB OTG transceiver.
@@ -29,6 +30,7 @@ config ISP1301_OMAP
 	tristate "Philips ISP1301 with OMAP OTG"
 	depends on I2C && ARCH_OMAP_OTG
 	depends on USB
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  If you say yes here you get support for the Philips ISP1301
@@ -43,7 +45,7 @@ config ISP1301_OMAP
 config KEYSTONE_USB_PHY
 	tristate "Keystone USB PHY Driver"
 	depends on ARCH_KEYSTONE || COMPILE_TEST
-	select NOP_USB_XCEIV
+	depends on NOP_USB_XCEIV
 	help
 	  Enable this to support Keystone USB phy. This driver provides
 	  interface to interact with USB 2.0 and USB 3.0 PHY that is part
@@ -51,6 +53,7 @@ config KEYSTONE_USB_PHY
 
 config NOP_USB_XCEIV
 	tristate "NOP USB Transceiver Driver"
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, NOP can't be built-in
 	select USB_PHY
 	help
 	  This driver is to be used by all the usb transceiver which are either
@@ -63,9 +66,9 @@ config AM335X_CONTROL_USB
 config AM335X_PHY_USB
 	tristate "AM335x USB PHY Driver"
 	depends on ARM || COMPILE_TEST
+	depends on NOP_USB_XCEIV
 	select USB_PHY
 	select AM335X_CONTROL_USB
-	select NOP_USB_XCEIV
 	select USB_COMMON
 	help
 	  This driver provides PHY support for that phy which part for the
@@ -92,6 +95,7 @@ config TWL6030_USB
 config USB_GPIO_VBUS
 	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"
 	depends on GPIOLIB || COMPILE_TEST
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Provides simple GPIO VBUS sensing for controllers with an
@@ -112,6 +116,7 @@ config OMAP_OTG
 config TAHVO_USB
 	tristate "Tahvo USB transceiver driver"
 	depends on MFD_RETU && EXTCON
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Enable this to support USB transceiver on Tahvo. This is used
@@ -140,6 +145,7 @@ config USB_ISP1301
 config USB_MSM_OTG
 	tristate "Qualcomm on-chip USB OTG controller support"
 	depends on (USB || USB_GADGET) && (ARCH_QCOM || COMPILE_TEST)
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	depends on RESET_CONTROLLER
 	depends on EXTCON
 	select USB_PHY
@@ -169,6 +175,7 @@ config USB_QCOM_8X16_PHY
 config USB_MV_OTG
 	tristate "Marvell USB OTG support"
 	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG
+	depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
 	select USB_PHY
 	help
 	  Say Y here if you want to build Marvell USB OTG transciever

drivers/usb/phy/phy-am335x.c

@@ -54,7 +54,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
 		return am_phy->id;
 	}
 
-	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node);
+	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
 
 	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
 	if (ret)

drivers/usb/phy/phy-msm-usb.c

@@ -18,6 +18,7 @@
 
 #include <linux/module.h>
 #include <linux/device.h>
+#include <linux/extcon.h>
 #include <linux/gpio/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
@@ -35,6 +36,8 @@
 #include <linux/of_device.h>
 #include <linux/reboot.h>
 #include <linux/reset.h>
+#include <linux/types.h>
+#include <linux/usb/otg.h>
 
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
@@ -42,10 +45,183 @@
 #include <linux/usb/ulpi.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/hcd.h>
-#include <linux/usb/msm_hsusb.h>
 #include <linux/usb/msm_hsusb_hw.h>
 #include <linux/regulator/consumer.h>
 
+/**
+ * OTG control
+ *
+ * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
+ *                      only configuration.
+ * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
+ * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
+ * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
+ *
+ */
+enum otg_control_type {
+	OTG_NO_CONTROL = 0,
+	OTG_PHY_CONTROL,
+	OTG_PMIC_CONTROL,
+	OTG_USER_CONTROL,
+};
+
+/**
+ * PHY used in
+ *
+ * INVALID_PHY			Unsupported PHY
+ * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
+ * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
+ *
+ */
+enum msm_usb_phy_type {
+	INVALID_PHY = 0,
+	CI_45NM_INTEGRATED_PHY,
+	SNPS_28NM_INTEGRATED_PHY,
+};
+
+#define IDEV_CHG_MAX	1500
+#define IUNIT		100
+
+/**
+ * Different states involved in USB charger detection.
+ *
+ * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
+ *                              process is not yet started.
+ * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
+ * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
+ * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
+ *                              between SDP and DCP/CDP).
+ * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
+ *                              between DCP and CDP).
+ * USB_CHG_STATE_DETECTED	USB charger type is determined.
+ *
+ */
+enum usb_chg_state {
+	USB_CHG_STATE_UNDEFINED = 0,
+	USB_CHG_STATE_WAIT_FOR_DCD,
+	USB_CHG_STATE_DCD_DONE,
+	USB_CHG_STATE_PRIMARY_DONE,
+	USB_CHG_STATE_SECONDARY_DONE,
+	USB_CHG_STATE_DETECTED,
+};
+
+/**
+ * USB charger types
+ *
+ * USB_INVALID_CHARGER	Invalid USB charger.
+ * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
+ *                      on USB2.0 compliant host/hub.
+ * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
+ * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
+ *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
+ *
+ */
+enum usb_chg_type {
+	USB_INVALID_CHARGER = 0,
+	USB_SDP_CHARGER,
+	USB_DCP_CHARGER,
+	USB_CDP_CHARGER,
+};
+
+/**
+ * struct msm_otg_platform_data - platform device data
+ *              for msm_otg driver.
+ * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
+ *              "do not overwrite default vaule at this address".
+ * @phy_init_sz: PHY configuration sequence size.
+ * @vbus_power: VBUS power on/off routine.
+ * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
+ * @mode: Supported mode (OTG/peripheral/host).
+ * @otg_control: OTG switch controlled by user/Id pin
+ */
+struct msm_otg_platform_data {
+	int *phy_init_seq;
+	int phy_init_sz;
+	void (*vbus_power)(bool on);
+	unsigned power_budget;
+	enum usb_dr_mode mode;
+	enum otg_control_type otg_control;
+	enum msm_usb_phy_type phy_type;
+	void (*setup_gpio)(enum usb_otg_state state);
+};
+
+/**
+ * struct msm_usb_cable - structure for exteternal connector cable
+ *			  state tracking
+ * @nb: hold event notification callback
+ * @conn: used for notification registration
+ */
+struct msm_usb_cable {
+	struct notifier_block		nb;
+	struct extcon_dev		*extcon;
+};
+
+/**
+ * struct msm_otg: OTG driver data. Shared by HCD and DCD.
+ * @otg: USB OTG Transceiver structure.
+ * @pdata: otg device platform data.
+ * @irq: IRQ number assigned for HSUSB controller.
+ * @clk: clock struct of usb_hs_clk.
+ * @pclk: clock struct of usb_hs_pclk.
+ * @core_clk: clock struct of usb_hs_core_clk.
+ * @regs: ioremapped register base address.
+ * @inputs: OTG state machine inputs(Id, SessValid etc).
+ * @sm_work: OTG state machine work.
+ * @in_lpm: indicates low power mode (LPM) state.
+ * @async_int: Async interrupt arrived.
+ * @cur_power: The amount of mA available from downstream port.
+ * @chg_work: Charger detection work.
+ * @chg_state: The state of charger detection process.
+ * @chg_type: The type of charger attached.
+ * @dcd_retires: The retry count used to track Data contact
+ *               detection process.
+ * @manual_pullup: true if VBUS is not routed to USB controller/phy
+ *	and controller driver therefore enables pull-up explicitly before
+ *	starting controller using usbcmd run/stop bit.
+ * @vbus: VBUS signal state trakining, using extcon framework
+ * @id: ID signal state trakining, using extcon framework
+ * @switch_gpio: Descriptor for GPIO used to control external Dual
+ *               SPDT USB Switch.
+ * @reboot: Used to inform the driver to route USB D+/D- line to Device
+ *	    connector
+ */
+struct msm_otg {
+	struct usb_phy phy;
+	struct msm_otg_platform_data *pdata;
+	int irq;
+	struct clk *clk;
+	struct clk *pclk;
+	struct clk *core_clk;
+	void __iomem *regs;
+#define ID		0
+#define B_SESS_VLD	1
+	unsigned long inputs;
+	struct work_struct sm_work;
+	atomic_t in_lpm;
+	int async_int;
+	unsigned cur_power;
+	int phy_number;
+	struct delayed_work chg_work;
+	enum usb_chg_state chg_state;
+	enum usb_chg_type chg_type;
+	u8 dcd_retries;
+	struct regulator *v3p3;
+	struct regulator *v1p8;
+	struct regulator *vddcx;
+
+	struct reset_control *phy_rst;
+	struct reset_control *link_rst;
+	int vdd_levels[3];
+
+	bool manual_pullup;
+
+	struct msm_usb_cable vbus;
+	struct msm_usb_cable id;
+
+	struct gpio_desc *switch_gpio;
+	struct notifier_block reboot;
+};
+
 #define MSM_USB_BASE	(motg->regs)
 #define DRIVER_NAME	"msm_otg"
 

drivers/usb/phy/phy-omap-otg.c

@@ -148,7 +148,7 @@ static int omap_otg_remove(struct platform_device *pdev)
 	struct otg_device *otg_dev = platform_get_drvdata(pdev);
 	struct extcon_dev *edev = otg_dev->extcon;
 
-	extcon_unregister_notifier(edev, EXTCON_USB_HOST,&otg_dev->id_nb);
+	extcon_unregister_notifier(edev, EXTCON_USB_HOST, &otg_dev->id_nb);
 	extcon_unregister_notifier(edev, EXTCON_USB, &otg_dev->vbus_nb);
 
 	return 0;

drivers/usb/renesas_usbhs/common.c

@@ -697,7 +697,7 @@ probe_end_fifo_exit:
 probe_end_pipe_exit:
 	usbhs_pipe_remove(priv);
 
-	dev_info(&pdev->dev, "probe failed\n");
+	dev_info(&pdev->dev, "probe failed (%d)\n", ret);
 
 	return ret;
 }

drivers/usb/renesas_usbhs/fifo.c

@@ -810,20 +810,27 @@ static void xfer_work(struct work_struct *work)
 {
 	struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work);
 	struct usbhs_pipe *pipe = pkt->pipe;
-	struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe);
+	struct usbhs_fifo *fifo;
 	struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
 	struct dma_async_tx_descriptor *desc;
-	struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt);
+	struct dma_chan *chan;
 	struct device *dev = usbhs_priv_to_dev(priv);
 	enum dma_transfer_direction dir;
+	unsigned long flags;
 
+	usbhs_lock(priv, flags);
+	fifo = usbhs_pipe_to_fifo(pipe);
+	if (!fifo)
+		goto xfer_work_end;
+
+	chan = usbhsf_dma_chan_get(fifo, pkt);
 	dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
 
 	desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual,
 					pkt->trans, dir,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc)
-		return;
+		goto xfer_work_end;
 
 	desc->callback		= usbhsf_dma_complete;
 	desc->callback_param	= pipe;
@@ -831,7 +838,7 @@ static void xfer_work(struct work_struct *work)
 	pkt->cookie = dmaengine_submit(desc);
 	if (pkt->cookie < 0) {
 		dev_err(dev, "Failed to submit dma descriptor\n");
-		return;
+		goto xfer_work_end;
 	}
 
 	dev_dbg(dev, "  %s %d (%d/ %d)\n",
@@ -842,6 +849,9 @@ static void xfer_work(struct work_struct *work)
 	usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans);
 	dma_async_issue_pending(chan);
 	usbhs_pipe_enable(pipe);
+
+xfer_work_end:
+	usbhs_unlock(priv, flags);
 }
 
 /*

drivers/usb/renesas_usbhs/mod_gadget.c

@@ -585,6 +585,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	struct usbhs_priv *priv = usbhsg_gpriv_to_priv(gpriv);
 	struct usbhs_pipe *pipe;
 	int ret = -EIO;
+	unsigned long flags;
+
+	usbhs_lock(priv, flags);
 
 	/*
 	 * if it already have pipe,
@@ -593,7 +596,8 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 	if (uep->pipe) {
 		usbhs_pipe_clear(uep->pipe);
 		usbhs_pipe_sequence_data0(uep->pipe);
-		return 0;
+		ret = 0;
+		goto usbhsg_ep_enable_end;
 	}
 
 	pipe = usbhs_pipe_malloc(priv,
@@ -621,6 +625,9 @@ static int usbhsg_ep_enable(struct usb_ep *ep,
 		ret = 0;
 	}
 
+usbhsg_ep_enable_end:
+	usbhs_unlock(priv, flags);
+
 	return ret;
 }
 

include/linux/usb/gadget.h

@@ -25,6 +25,8 @@
 #include <linux/workqueue.h>
 #include <linux/usb/ch9.h>
 
+#define UDC_TRACE_STR_MAX	512
+
 struct usb_ep;
 
 /**
@@ -228,307 +230,49 @@ struct usb_ep {
 
 /*-------------------------------------------------------------------------*/
 
-/**
- * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
- * @ep:the endpoint being configured
- * @maxpacket_limit:value of maximum packet size limit
- *
- * This function should be used only in UDC drivers to initialize endpoint
- * (usually in probe function).
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+void usb_ep_set_maxpacket_limit(struct usb_ep *ep, unsigned maxpacket_limit);
+int usb_ep_enable(struct usb_ep *ep);
+int usb_ep_disable(struct usb_ep *ep);
+struct usb_request *usb_ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags);
+void usb_ep_free_request(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_queue(struct usb_ep *ep, struct usb_request *req, gfp_t gfp_flags);
+int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req);
+int usb_ep_set_halt(struct usb_ep *ep);
+int usb_ep_clear_halt(struct usb_ep *ep);
+int usb_ep_set_wedge(struct usb_ep *ep);
+int usb_ep_fifo_status(struct usb_ep *ep);
+void usb_ep_fifo_flush(struct usb_ep *ep);
+#else
 static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
-					      unsigned maxpacket_limit)
-{
-	ep->maxpacket_limit = maxpacket_limit;
-	ep->maxpacket = maxpacket_limit;
-}
-
-/**
- * usb_ep_enable - configure endpoint, making it usable
- * @ep:the endpoint being configured.  may not be the endpoint named "ep0".
- *	drivers discover endpoints through the ep_list of a usb_gadget.
- *
- * When configurations are set, or when interface settings change, the driver
- * will enable or disable the relevant endpoints.  while it is enabled, an
- * endpoint may be used for i/o until the driver receives a disconnect() from
- * the host or until the endpoint is disabled.
- *
- * the ep0 implementation (which calls this routine) must ensure that the
- * hardware capabilities of each endpoint match the descriptor provided
- * for it.  for example, an endpoint named "ep2in-bulk" would be usable
- * for interrupt transfers as well as bulk, but it likely couldn't be used
- * for iso transfers or for endpoint 14.  some endpoints are fully
- * configurable, with more generic names like "ep-a".  (remember that for
- * USB, "in" means "towards the USB master".)
- *
- * returns zero, or a negative error code.
- */
+		unsigned maxpacket_limit)
+{ }
 static inline int usb_ep_enable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (ep->enabled)
-		return 0;
-
-	ret = ep->ops->enable(ep, ep->desc);
-	if (ret)
-		return ret;
-
-	ep->enabled = true;
-
-	return 0;
-}
-
-/**
- * usb_ep_disable - endpoint is no longer usable
- * @ep:the endpoint being unconfigured.  may not be the endpoint named "ep0".
- *
- * no other task may be using this endpoint when this is called.
- * any pending and uncompleted requests will complete with status
- * indicating disconnect (-ESHUTDOWN) before this call returns.
- * gadget drivers must call usb_ep_enable() again before queueing
- * requests to the endpoint.
- *
- * returns zero, or a negative error code.
- */
+{ return 0; }
 static inline int usb_ep_disable(struct usb_ep *ep)
-{
-	int ret;
-
-	if (!ep->enabled)
-		return 0;
-
-	ret = ep->ops->disable(ep);
-	if (ret)
-		return ret;
-
-	ep->enabled = false;
-
-	return 0;
-}
-
-/**
- * usb_ep_alloc_request - allocate a request object to use with this endpoint
- * @ep:the endpoint to be used with with the request
- * @gfp_flags:GFP_* flags to use
- *
- * Request objects must be allocated with this call, since they normally
- * need controller-specific setup and may even need endpoint-specific
- * resources such as allocation of DMA descriptors.
- * Requests may be submitted with usb_ep_queue(), and receive a single
- * completion callback.  Free requests with usb_ep_free_request(), when
- * they are no longer needed.
- *
- * Returns the request, or null if one could not be allocated.
- */
+{ return 0; }
 static inline struct usb_request *usb_ep_alloc_request(struct usb_ep *ep,
-						       gfp_t gfp_flags)
-{
-	return ep->ops->alloc_request(ep, gfp_flags);
-}
-
-/**
- * usb_ep_free_request - frees a request object
- * @ep:the endpoint associated with the request
- * @req:the request being freed
- *
- * Reverses the effect of usb_ep_alloc_request().
- * Caller guarantees the request is not queued, and that it will
- * no longer be requeued (or otherwise used).
- */
+		gfp_t gfp_flags)
+{ return NULL; }
 static inline void usb_ep_free_request(struct usb_ep *ep,
-				       struct usb_request *req)
-{
-	ep->ops->free_request(ep, req);
-}
-
-/**
- * usb_ep_queue - queues (submits) an I/O request to an endpoint.
- * @ep:the endpoint associated with the request
- * @req:the request being submitted
- * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
- *	pre-allocate all necessary memory with the request.
- *
- * This tells the device controller to perform the specified request through
- * that endpoint (reading or writing a buffer).  When the request completes,
- * including being canceled by usb_ep_dequeue(), the request's completion
- * routine is called to return the request to the driver.  Any endpoint
- * (except control endpoints like ep0) may have more than one transfer
- * request queued; they complete in FIFO order.  Once a gadget driver
- * submits a request, that request may not be examined or modified until it
- * is given back to that driver through the completion callback.
- *
- * Each request is turned into one or more packets.  The controller driver
- * never merges adjacent requests into the same packet.  OUT transfers
- * will sometimes use data that's already buffered in the hardware.
- * Drivers can rely on the fact that the first byte of the request's buffer
- * always corresponds to the first byte of some USB packet, for both
- * IN and OUT transfers.
- *
- * Bulk endpoints can queue any amount of data; the transfer is packetized
- * automatically.  The last packet will be short if the request doesn't fill it
- * out completely.  Zero length packets (ZLPs) should be avoided in portable
- * protocols since not all usb hardware can successfully handle zero length
- * packets.  (ZLPs may be explicitly written, and may be implicitly written if
- * the request 'zero' flag is set.)  Bulk endpoints may also be used
- * for interrupt transfers; but the reverse is not true, and some endpoints
- * won't support every interrupt transfer.  (Such as 768 byte packets.)
- *
- * Interrupt-only endpoints are less functional than bulk endpoints, for
- * example by not supporting queueing or not handling buffers that are
- * larger than the endpoint's maxpacket size.  They may also treat data
- * toggle differently.
- *
- * Control endpoints ... after getting a setup() callback, the driver queues
- * one response (even if it would be zero length).  That enables the
- * status ack, after transferring data as specified in the response.  Setup
- * functions may return negative error codes to generate protocol stalls.
- * (Note that some USB device controllers disallow protocol stall responses
- * in some cases.)  When control responses are deferred (the response is
- * written after the setup callback returns), then usb_ep_set_halt() may be
- * used on ep0 to trigger protocol stalls.  Depending on the controller,
- * it may not be possible to trigger a status-stage protocol stall when the
- * data stage is over, that is, from within the response's completion
- * routine.
- *
- * For periodic endpoints, like interrupt or isochronous ones, the usb host
- * arranges to poll once per interval, and the gadget driver usually will
- * have queued some data to transfer at that time.
- *
- * Returns zero, or a negative error code.  Endpoints that are not enabled
- * report errors; errors will also be
- * reported when the usb peripheral is disconnected.
- */
-static inline int usb_ep_queue(struct usb_ep *ep,
-			       struct usb_request *req, gfp_t gfp_flags)
-{
-	if (WARN_ON_ONCE(!ep->enabled && ep->address))
-		return -ESHUTDOWN;
-
-	return ep->ops->queue(ep, req, gfp_flags);
-}
-
-/**
- * usb_ep_dequeue - dequeues (cancels, unlinks) an I/O request from an endpoint
- * @ep:the endpoint associated with the request
- * @req:the request being canceled
- *
- * If the request is still active on the endpoint, it is dequeued and its
- * completion routine is called (with status -ECONNRESET); else a negative
- * error code is returned. This is guaranteed to happen before the call to
- * usb_ep_dequeue() returns.
- *
- * Note that some hardware can't clear out write fifos (to unlink the request
- * at the head of the queue) except as part of disconnecting from usb. Such
- * restrictions prevent drivers from supporting configuration changes,
- * even to configuration zero (a "chapter 9" requirement).
- */
+		struct usb_request *req)
+{ }
+static inline int usb_ep_queue(struct usb_ep *ep, struct usb_request *req,
+		gfp_t gfp_flags)
+{ return 0; }
 static inline int usb_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
-{
-	return ep->ops->dequeue(ep, req);
-}
-
-/**
- * usb_ep_set_halt - sets the endpoint halt feature.
- * @ep: the non-isochronous endpoint being stalled
- *
- * Use this to stall an endpoint, perhaps as an error report.
- * Except for control endpoints,
- * the endpoint stays halted (will not stream any data) until the host
- * clears this feature; drivers may need to empty the endpoint's request
- * queue first, to make sure no inappropriate transfers happen.
- *
- * Note that while an endpoint CLEAR_FEATURE will be invisible to the
- * gadget driver, a SET_INTERFACE will not be.  To reset endpoints for the
- * current altsetting, see usb_ep_clear_halt().  When switching altsettings,
- * it's simplest to use usb_ep_enable() or usb_ep_disable() for the endpoints.
- *
- * Returns zero, or a negative error code.  On success, this call sets
- * underlying hardware state that blocks data transfers.
- * Attempts to halt IN endpoints will fail (returning -EAGAIN) if any
- * transfer requests are still queued, or if the controller hardware
- * (usually a FIFO) still holds bytes that the host hasn't collected.
- */
+{ return 0; }
 static inline int usb_ep_set_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_clear_halt - clears endpoint halt, and resets toggle
- * @ep:the bulk or interrupt endpoint being reset
- *
- * Use this when responding to the standard usb "set interface" request,
- * for endpoints that aren't reconfigured, after clearing any other state
- * in the endpoint's i/o queue.
- *
- * Returns zero, or a negative error code.  On success, this call clears
- * the underlying hardware state reflecting endpoint halt and data toggle.
- * Note that some hardware can't support this request (like pxa2xx_udc),
- * and accordingly can't correctly implement interface altsettings.
- */
+{ return 0; }
 static inline int usb_ep_clear_halt(struct usb_ep *ep)
-{
-	return ep->ops->set_halt(ep, 0);
-}
-
-/**
- * usb_ep_set_wedge - sets the halt feature and ignores clear requests
- * @ep: the endpoint being wedged
- *
- * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
- * requests. If the gadget driver clears the halt status, it will
- * automatically unwedge the endpoint.
- *
- * Returns zero on success, else negative errno.
- */
-static inline int
-usb_ep_set_wedge(struct usb_ep *ep)
-{
-	if (ep->ops->set_wedge)
-		return ep->ops->set_wedge(ep);
-	else
-		return ep->ops->set_halt(ep, 1);
-}
-
-/**
- * usb_ep_fifo_status - returns number of bytes in fifo, or error
- * @ep: the endpoint whose fifo status is being checked.
- *
- * FIFO endpoints may have "unclaimed data" in them in certain cases,
- * such as after aborted transfers.  Hosts may not have collected all
- * the IN data written by the gadget driver (and reported by a request
- * completion).  The gadget driver may not have collected all the data
- * written OUT to it by the host.  Drivers that need precise handling for
- * fault reporting or recovery may need to use this call.
- *
- * This returns the number of such bytes in the fifo, or a negative
- * errno if the endpoint doesn't use a FIFO or doesn't support such
- * precise handling.
- */
+{ return 0; }
+static inline int usb_ep_set_wedge(struct usb_ep *ep)
+{ return 0; }
 static inline int usb_ep_fifo_status(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_status)
-		return ep->ops->fifo_status(ep);
-	else
-		return -EOPNOTSUPP;
-}
-
-/**
- * usb_ep_fifo_flush - flushes contents of a fifo
- * @ep: the endpoint whose fifo is being flushed.
- *
- * This call may be used to flush the "unclaimed data" that may exist in
- * an endpoint fifo after abnormal transaction terminations.  The call
- * must never be used except when endpoint is not being used for any
- * protocol translation.
- */
+{ return 0; }
 static inline void usb_ep_fifo_flush(struct usb_ep *ep)
-{
-	if (ep->ops->fifo_flush)
-		ep->ops->fifo_flush(ep);
-}
-
+{ }
+#endif /* USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 
@@ -582,6 +326,7 @@ struct usb_gadget_ops {
  * @dev: Driver model state for this abstract device.
  * @out_epnum: last used out ep number
  * @in_epnum: last used in ep number
+ * @mA: last set mA value
  * @otg_caps: OTG capabilities of this gadget.
  * @sg_supported: true if we can handle scatter-gather
  * @is_otg: True if the USB device port uses a Mini-AB jack, so that the
@@ -638,6 +383,7 @@ struct usb_gadget {
 	struct device			dev;
 	unsigned			out_epnum;
 	unsigned			in_epnum;
+	unsigned			mA;
 	struct usb_otg_caps		*otg_caps;
 
 	unsigned			sg_supported:1;
@@ -760,251 +506,44 @@ static inline int gadget_is_otg(struct usb_gadget *g)
 #endif
 }
 
-/**
- * usb_gadget_frame_number - returns the current frame number
- * @gadget: controller that reports the frame number
- *
- * Returns the usb frame number, normally eleven bits from a SOF packet,
- * or negative errno if this device doesn't support this capability.
- */
-static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
-{
-	return gadget->ops->get_frame(gadget);
-}
+/*-------------------------------------------------------------------------*/
 
-/**
- * usb_gadget_wakeup - tries to wake up the host connected to this gadget
- * @gadget: controller used to wake up the host
- *
- * Returns zero on success, else negative error code if the hardware
- * doesn't support such attempts, or its support has not been enabled
- * by the usb host.  Drivers must return device descriptors that report
- * their ability to support this, or hosts won't enable it.
- *
- * This may also try to use SRP to wake the host and start enumeration,
- * even if OTG isn't otherwise in use.  OTG devices may also start
- * remote wakeup even when hosts don't explicitly enable it.
- */
+#if IS_ENABLED(CONFIG_USB_GADGET)
+int usb_gadget_frame_number(struct usb_gadget *gadget);
+int usb_gadget_wakeup(struct usb_gadget *gadget);
+int usb_gadget_set_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_clear_selfpowered(struct usb_gadget *gadget);
+int usb_gadget_vbus_connect(struct usb_gadget *gadget);
+int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA);
+int usb_gadget_vbus_disconnect(struct usb_gadget *gadget);
+int usb_gadget_connect(struct usb_gadget *gadget);
+int usb_gadget_disconnect(struct usb_gadget *gadget);
+int usb_gadget_deactivate(struct usb_gadget *gadget);
+int usb_gadget_activate(struct usb_gadget *gadget);
+#else
+static inline int usb_gadget_frame_number(struct usb_gadget *gadget)
+{ return 0; }
 static inline int usb_gadget_wakeup(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->wakeup)
-		return -EOPNOTSUPP;
-	return gadget->ops->wakeup(gadget);
-}
-
-/**
- * usb_gadget_set_selfpowered - sets the device selfpowered feature.
- * @gadget:the device being declared as self-powered
- *
- * this affects the device status reported by the hardware driver
- * to reflect that it now has a local power supply.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 1);
-}
-
-/**
- * usb_gadget_clear_selfpowered - clear the device selfpowered feature.
- * @gadget:the device being declared as bus-powered
- *
- * this affects the device status reported by the hardware driver.
- * some hardware may not support bus-powered operation, in which
- * case this feature's value can never change.
- *
- * returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->set_selfpowered)
-		return -EOPNOTSUPP;
-	return gadget->ops->set_selfpowered(gadget, 0);
-}
-
-/**
- * usb_gadget_vbus_connect - Notify controller that VBUS is powered
- * @gadget:The device which now has VBUS power.
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session starting.  Common responses include
- * resuming the controller, activating the D+ (or D-) pullup to let the
- * host detect that a USB device is attached, and starting to draw power
- * (8mA or possibly more, especially after SET_CONFIGURATION).
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_connect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 1);
-}
-
-/**
- * usb_gadget_vbus_draw - constrain controller's VBUS power usage
- * @gadget:The device whose VBUS usage is being described
- * @mA:How much current to draw, in milliAmperes.  This should be twice
- *	the value listed in the configuration descriptor bMaxPower field.
- *
- * This call is used by gadget drivers during SET_CONFIGURATION calls,
- * reporting how much power the device may consume.  For example, this
- * could affect how quickly batteries are recharged.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA)
-{
-	if (!gadget->ops->vbus_draw)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_draw(gadget, mA);
-}
-
-/**
- * usb_gadget_vbus_disconnect - notify controller about VBUS session end
- * @gadget:the device whose VBUS supply is being described
- * Context: can sleep
- *
- * This call is used by a driver for an external transceiver (or GPIO)
- * that detects a VBUS power session ending.  Common responses include
- * reversing everything done in usb_gadget_vbus_connect().
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_vbus_disconnect(struct usb_gadget *gadget)
-{
-	if (!gadget->ops->vbus_session)
-		return -EOPNOTSUPP;
-	return gadget->ops->vbus_session(gadget, 0);
-}
-
-/**
- * usb_gadget_connect - software-controlled connect to USB host
- * @gadget:the peripheral being connected
- *
- * Enables the D+ (or potentially D-) pullup.  The host will start
- * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_connect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will be connected automatically after activation.
-		 */
-		gadget->connected = true;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 1);
-	if (!ret)
-		gadget->connected = 1;
-	return ret;
-}
-
-/**
- * usb_gadget_disconnect - software-controlled disconnect from USB host
- * @gadget:the peripheral being disconnected
- *
- * Disables the D+ (or potentially D-) pullup, which the host may see
- * as a disconnect (when a VBUS session is active).  Not all systems
- * support software pullup controls.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_disconnect(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (!gadget->ops->pullup)
-		return -EOPNOTSUPP;
-
-	if (gadget->deactivated) {
-		/*
-		 * If gadget is deactivated we only save new state.
-		 * Gadget will stay disconnected after activation.
-		 */
-		gadget->connected = false;
-		return 0;
-	}
-
-	ret = gadget->ops->pullup(gadget, 0);
-	if (!ret)
-		gadget->connected = 0;
-	return ret;
-}
-
-/**
- * usb_gadget_deactivate - deactivate function which is not ready to work
- * @gadget: the peripheral being deactivated
- *
- * This routine may be used during the gadget driver bind() call to prevent
- * the peripheral from ever being visible to the USB host, unless later
- * usb_gadget_activate() is called.  For example, user mode components may
- * need to be activated before the system can talk to hosts.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_deactivate(struct usb_gadget *gadget)
-{
-	int ret;
-
-	if (gadget->deactivated)
-		return 0;
-
-	if (gadget->connected) {
-		ret = usb_gadget_disconnect(gadget);
-		if (ret)
-			return ret;
-		/*
-		 * If gadget was being connected before deactivation, we want
-		 * to reconnect it in usb_gadget_activate().
-		 */
-		gadget->connected = true;
-	}
-	gadget->deactivated = true;
-
-	return 0;
-}
-
-/**
- * usb_gadget_activate - activate function which is not ready to work
- * @gadget: the peripheral being activated
- *
- * This routine activates gadget which was previously deactivated with
- * usb_gadget_deactivate() call. It calls usb_gadget_connect() if needed.
- *
- * Returns zero on success, else negative errno.
- */
+{ return 0; }
 static inline int usb_gadget_activate(struct usb_gadget *gadget)
-{
-	if (!gadget->deactivated)
-		return 0;
-
-	gadget->deactivated = false;
-
-	/*
-	 * If gadget has been connected before deactivation, or became connected
-	 * while it was being deactivated, we call usb_gadget_connect().
-	 */
-	if (gadget->connected)
-		return usb_gadget_connect(gadget);
-
-	return 0;
-}
+{ return 0; }
+#endif /* CONFIG_USB_GADGET */
 
 /*-------------------------------------------------------------------------*/
 

include/linux/usb/msm_hsusb.h

@@ -1,200 +0,0 @@
-/* linux/include/asm-arm/arch-msm/hsusb.h
- *
- * Copyright (C) 2008 Google, Inc.
- * Author: Brian Swetland <swetland@google.com>
- * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MSM_HSUSB_H
-#define __ASM_ARCH_MSM_HSUSB_H
-
-#include <linux/extcon.h>
-#include <linux/types.h>
-#include <linux/usb/otg.h>
-#include <linux/clk.h>
-
-/**
- * OTG control
- *
- * OTG_NO_CONTROL	Id/VBUS notifications not required. Useful in host
- *                      only configuration.
- * OTG_PHY_CONTROL	Id/VBUS notifications comes form USB PHY.
- * OTG_PMIC_CONTROL	Id/VBUS notifications comes from PMIC hardware.
- * OTG_USER_CONTROL	Id/VBUS notifcations comes from User via sysfs.
- *
- */
-enum otg_control_type {
-	OTG_NO_CONTROL = 0,
-	OTG_PHY_CONTROL,
-	OTG_PMIC_CONTROL,
-	OTG_USER_CONTROL,
-};
-
-/**
- * PHY used in
- *
- * INVALID_PHY			Unsupported PHY
- * CI_45NM_INTEGRATED_PHY	Chipidea 45nm integrated PHY
- * SNPS_28NM_INTEGRATED_PHY	Synopsis 28nm integrated PHY
- *
- */
-enum msm_usb_phy_type {
-	INVALID_PHY = 0,
-	CI_45NM_INTEGRATED_PHY,
-	SNPS_28NM_INTEGRATED_PHY,
-};
-
-#define IDEV_CHG_MAX	1500
-#define IUNIT		100
-
-/**
- * Different states involved in USB charger detection.
- *
- * USB_CHG_STATE_UNDEFINED	USB charger is not connected or detection
- *                              process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD	Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE	Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE	Primary detection is completed (Detects
- *                              between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE	Secondary detection is completed (Detects
- *                              between DCP and CDP).
- * USB_CHG_STATE_DETECTED	USB charger type is determined.
- *
- */
-enum usb_chg_state {
-	USB_CHG_STATE_UNDEFINED = 0,
-	USB_CHG_STATE_WAIT_FOR_DCD,
-	USB_CHG_STATE_DCD_DONE,
-	USB_CHG_STATE_PRIMARY_DONE,
-	USB_CHG_STATE_SECONDARY_DONE,
-	USB_CHG_STATE_DETECTED,
-};
-
-/**
- * USB charger types
- *
- * USB_INVALID_CHARGER	Invalid USB charger.
- * USB_SDP_CHARGER	Standard downstream port. Refers to a downstream port
- *                      on USB2.0 compliant host/hub.
- * USB_DCP_CHARGER	Dedicated charger port (AC charger/ Wall charger).
- * USB_CDP_CHARGER	Charging downstream port. Enumeration can happen and
- *                      IDEV_CHG_MAX can be drawn irrespective of USB state.
- *
- */
-enum usb_chg_type {
-	USB_INVALID_CHARGER = 0,
-	USB_SDP_CHARGER,
-	USB_DCP_CHARGER,
-	USB_CDP_CHARGER,
-};
-
-/**
- * struct msm_otg_platform_data - platform device data
- *              for msm_otg driver.
- * @phy_init_seq: PHY configuration sequence values. Value of -1 is reserved as
- *              "do not overwrite default vaule at this address".
- * @phy_init_sz: PHY configuration sequence size.
- * @vbus_power: VBUS power on/off routine.
- * @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
- * @mode: Supported mode (OTG/peripheral/host).
- * @otg_control: OTG switch controlled by user/Id pin
- */
-struct msm_otg_platform_data {
-	int *phy_init_seq;
-	int phy_init_sz;
-	void (*vbus_power)(bool on);
-	unsigned power_budget;
-	enum usb_dr_mode mode;
-	enum otg_control_type otg_control;
-	enum msm_usb_phy_type phy_type;
-	void (*setup_gpio)(enum usb_otg_state state);
-};
-
-/**
- * struct msm_usb_cable - structure for exteternal connector cable
- *			  state tracking
- * @nb: hold event notification callback
- * @conn: used for notification registration
- */
-struct msm_usb_cable {
-	struct notifier_block		nb;
-	struct extcon_dev		*extcon;
-};
-
-/**
- * struct msm_otg: OTG driver data. Shared by HCD and DCD.
- * @otg: USB OTG Transceiver structure.
- * @pdata: otg device platform data.
- * @irq: IRQ number assigned for HSUSB controller.
- * @clk: clock struct of usb_hs_clk.
- * @pclk: clock struct of usb_hs_pclk.
- * @core_clk: clock struct of usb_hs_core_clk.
- * @regs: ioremapped register base address.
- * @inputs: OTG state machine inputs(Id, SessValid etc).
- * @sm_work: OTG state machine work.
- * @in_lpm: indicates low power mode (LPM) state.
- * @async_int: Async interrupt arrived.
- * @cur_power: The amount of mA available from downstream port.
- * @chg_work: Charger detection work.
- * @chg_state: The state of charger detection process.
- * @chg_type: The type of charger attached.
- * @dcd_retires: The retry count used to track Data contact
- *               detection process.
- * @manual_pullup: true if VBUS is not routed to USB controller/phy
- *	and controller driver therefore enables pull-up explicitly before
- *	starting controller using usbcmd run/stop bit.
- * @vbus: VBUS signal state trakining, using extcon framework
- * @id: ID signal state trakining, using extcon framework
- * @switch_gpio: Descriptor for GPIO used to control external Dual
- *               SPDT USB Switch.
- * @reboot: Used to inform the driver to route USB D+/D- line to Device
- *	    connector
- */
-struct msm_otg {
-	struct usb_phy phy;
-	struct msm_otg_platform_data *pdata;
-	int irq;
-	struct clk *clk;
-	struct clk *pclk;
-	struct clk *core_clk;
-	void __iomem *regs;
-#define ID		0
-#define B_SESS_VLD	1
-	unsigned long inputs;
-	struct work_struct sm_work;
-	atomic_t in_lpm;
-	int async_int;
-	unsigned cur_power;
-	int phy_number;
-	struct delayed_work chg_work;
-	enum usb_chg_state chg_state;
-	enum usb_chg_type chg_type;
-	u8 dcd_retries;
-	struct regulator *v3p3;
-	struct regulator *v1p8;
-	struct regulator *vddcx;
-
-	struct reset_control *phy_rst;
-	struct reset_control *link_rst;
-	int vdd_levels[3];
-
-	bool manual_pullup;
-
-	struct msm_usb_cable vbus;
-	struct msm_usb_cable id;
-
-	struct gpio_desc *switch_gpio;
-	struct notifier_block reboot;
-};
-
-#endif

include/linux/usb/of.h

@@ -12,7 +12,7 @@
 #include <linux/usb/phy.h>
 
 #if IS_ENABLED(CONFIG_OF)
-enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *phy_np);
+enum usb_dr_mode of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0);
 bool of_usb_host_tpl_support(struct device_node *np);
 int of_usb_update_otg_caps(struct device_node *np,
 			struct usb_otg_caps *otg_caps);
@@ -20,7 +20,7 @@ struct device_node *usb_of_get_child_node(struct device_node *parent,
 			int portnum);
 #else
 static inline enum usb_dr_mode
-of_usb_get_dr_mode_by_phy(struct device_node *phy_np)
+of_usb_get_dr_mode_by_phy(struct device_node *np, int arg0)
 {
 	return USB_DR_MODE_UNKNOWN;
 }