|
@@ -0,0 +1,48 @@
|
|
|
|
+Binding for Richtek rt9455 battery charger
|
|
|
|
+
|
|
|
|
+Required properties:
|
|
|
|
+- compatible: it should contain one of the following:
|
|
|
|
+ "richtek,rt9455".
|
|
|
|
+- reg: integer, i2c address of the device.
|
|
|
|
+- interrupt-parent: the phandle for the interrupt controller that
|
|
|
|
+ services interrupts for this device.
|
|
|
|
+- interrupts: interrupt mapping for GPIO IRQ, it should be
|
|
|
|
+ configured with IRQ_TYPE_LEVEL_LOW flag.
|
|
|
|
+- richtek,output-charge-current: integer, output current from the charger to the
|
|
|
|
+ battery, in uA.
|
|
|
|
+- richtek,end-of-charge-percentage: integer, percent of the output charge current.
|
|
|
|
+ When the current in constant-voltage phase drops
|
|
|
|
+ below output_charge_current x end-of-charge-percentage,
|
|
|
|
+ charge is terminated.
|
|
|
|
+- richtek,battery-regulation-voltage: integer, maximum battery voltage in uV.
|
|
|
|
+- richtek,boost-output-voltage: integer, maximum voltage provided to consumer
|
|
|
|
+ devices, when the charger is in boost mode, in uV.
|
|
|
|
+
|
|
|
|
+Optional properties:
|
|
|
|
+- richtek,min-input-voltage-regulation: integer, input voltage level in uV, used to
|
|
|
|
+ decrease voltage level when the over current
|
|
|
|
+ of the input power source occurs.
|
|
|
|
+ This prevents input voltage drop due to insufficient
|
|
|
|
+ current provided by the power source.
|
|
|
|
+ Default: 4500000 uV (4.5V)
|
|
|
|
+- richtek,avg-input-current-regulation: integer, input current value in uA drained by the
|
|
|
|
+ charger from the power source.
|
|
|
|
+ Default: 500000 uA (500mA)
|
|
|
|
+
|
|
|
|
+Example:
|
|
|
|
+
|
|
|
|
+rt9455@22 {
|
|
|
|
+ compatible = "richtek,rt9455";
|
|
|
|
+ reg = <0x22>;
|
|
|
|
+
|
|
|
|
+ interrupt-parent = <&gpio1>;
|
|
|
|
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
+
|
|
|
|
+ richtek,output-charge-current = <500000>;
|
|
|
|
+ richtek,end-of-charge-percentage = <10>;
|
|
|
|
+ richtek,battery-regulation-voltage = <4200000>;
|
|
|
|
+ richtek,boost-output-voltage = <5050000>;
|
|
|
|
+
|
|
|
|
+ richtek,min-input-voltage-regulation = <4500000>;
|
|
|
|
+ richtek,avg-input-current-regulation = <500000>;
|
|
|
|
+};
|