Merge tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:

 - MCIP aka ARconnect fixes for SMP builds [Euginey]

 - preventive fix for SLC (L2 cache) flushing [Euginey]

 - Kconfig default fix [Ulf Magnusson]

 - trailing semicolon fixes [Luis de Bethencourt]

 - other assorted minor fixes

* tag 'arc-4.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: setup cpu possible mask according to possible-cpus dts property
  ARC: mcip: update MCIP debug mask when the new cpu came online
  ARC: mcip: halt GFRC counter when ARC cores halt
  ARCv2: boot log: fix HS48 release number
  arc: dts: use 'atmel' as manufacturer for at24 in axs10x_mb
  ARC: Fix malformed ARC_EMUL_UNALIGNED default
  ARC: boot log: Fix trailing semicolon
  ARC: dw2 unwind: Fix trailing semicolon
  ARC: Enable fatal signals on boot for dev platforms
  ARCv2: Don't pretend we may set L-bit in STATUS32 with kflag instruction
  ARCv2: cache: fix slc_entire_op: flush only instead of flush-n-inv

arch/arc/Kconfig

@@ -484,7 +484,6 @@ config ARC_CURR_IN_REG
 
 config ARC_EMUL_UNALIGNED
 	bool "Emulate unaligned memory access (userspace only)"
-	default N
 	select SYSCTL_ARCH_UNALIGN_NO_WARN
 	select SYSCTL_ARCH_UNALIGN_ALLOW
 	depends on ISA_ARCOMPACT

arch/arc/boot/dts/axs101.dts

@@ -17,6 +17,6 @@
 	compatible = "snps,axs101", "snps,arc-sdp";
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60";
+		bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=1280x720@60 print-fatal-signals=1";
 	};
 };

arch/arc/boot/dts/axs10x_mb.dtsi

@@ -214,13 +214,13 @@
 			};
 
 			eeprom@0x54{
-				compatible = "24c01";
+				compatible = "atmel,24c01";
 				reg = <0x54>;
 				pagesize = <0x8>;
 			};
 
 			eeprom@0x57{
-				compatible = "24c04";
+				compatible = "atmel,24c04";
 				reg = <0x57>;
 				pagesize = <0x8>;
 			};

arch/arc/boot/dts/haps_hs_idu.dts

@@ -22,7 +22,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_700.dts

@@ -17,7 +17,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs.dts

@@ -24,7 +24,7 @@
 	};
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsim_hs_idu.dts

@@ -15,7 +15,7 @@
 	interrupt-parent = <&core_intc>;
 
 	chosen {
-		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8";
+		bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs.dts

@@ -20,7 +20,7 @@
 		/* this is for console on PGU */
 		/* bootargs = "console=tty0 consoleblank=0"; */
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/boot/dts/nsimosci_hs_idu.dts

@@ -18,7 +18,7 @@
 
 	chosen {
 		/* this is for console on serial */
-		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24";
+		bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1";
 	};
 
 	aliases {

arch/arc/include/asm/entry-arcv2.h

@@ -184,7 +184,7 @@
 .macro FAKE_RET_FROM_EXCPN
 	lr      r9, [status32]
 	bic     r9, r9, (STATUS_U_MASK|STATUS_DE_MASK|STATUS_AE_MASK)
-	or      r9, r9, (STATUS_L_MASK|STATUS_IE_MASK)
+	or      r9, r9, STATUS_IE_MASK
 	kflag   r9
 .endm
 

arch/arc/kernel/mcip.c

@@ -22,10 +22,79 @@ static DEFINE_RAW_SPINLOCK(mcip_lock);
 
 static char smp_cpuinfo_buf[128];
 
+/*
+ * Set mask to halt GFRC if any online core in SMP cluster is halted.
+ * Only works for ARC HS v3.0+, on earlier versions has no effect.
+ */
+static void mcip_update_gfrc_halt_mask(int cpu)
+{
+	struct bcr_generic gfrc;
+	unsigned long flags;
+	u32 gfrc_halt_mask;
+
+	READ_BCR(ARC_REG_GFRC_BUILD, gfrc);
+
+	/*
+	 * CMD_GFRC_SET_CORE and CMD_GFRC_READ_CORE commands were added in
+	 * GFRC 0x3 version.
+	 */
+	if (gfrc.ver < 0x3)
+		return;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	__mcip_cmd(CMD_GFRC_READ_CORE, 0);
+	gfrc_halt_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+	gfrc_halt_mask |= BIT(cpu);
+	__mcip_cmd_data(CMD_GFRC_SET_CORE, 0, gfrc_halt_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
+static void mcip_update_debug_halt_mask(int cpu)
+{
+	u32 mcip_mask = 0;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&mcip_lock, flags);
+
+	/*
+	 * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
+	 * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
+	 * and CMD_DEBUG_READ_SELECT.
+	 */
+	__mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
+	mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
+
+	mcip_mask |= BIT(cpu);
+
+	__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
+	/*
+	 * Parameter specified halt cause:
+	 * STATUS32[H]/actionpoint/breakpoint/self-halt
+	 * We choose all of them (0xF).
+	 */
+	__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
+
+	raw_spin_unlock_irqrestore(&mcip_lock, flags);
+}
+
 static void mcip_setup_per_cpu(int cpu)
 {
+	struct mcip_bcr mp;
+
+	READ_BCR(ARC_REG_MCIP_BCR, mp);
+
 	smp_ipi_irq_setup(cpu, IPI_IRQ);
 	smp_ipi_irq_setup(cpu, SOFTIRQ_IRQ);
+
+	/* Update GFRC halt mask as new CPU came online */
+	if (mp.gfrc)
+		mcip_update_gfrc_halt_mask(cpu);
+
+	/* Update MCIP debug mask as new CPU came online */
+	if (mp.dbg)
+		mcip_update_debug_halt_mask(cpu);
 }
 
 static void mcip_ipi_send(int cpu)
@@ -101,11 +170,6 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
 	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
-
-	if (mp.dbg) {
-		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
-		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
-	}
 }
 
 struct plat_smp_ops plat_smp_ops = {

arch/arc/kernel/setup.c

@@ -51,7 +51,7 @@ static const struct id_to_str arc_cpu_rel[] = {
 	{ 0x51, "R2.0" },
 	{ 0x52, "R2.1" },
 	{ 0x53, "R3.0" },
-	{ 0x54, "R4.0" },
+	{ 0x54, "R3.10a" },
 #endif
 	{ 0x00, NULL   }
 };

arch/arc/kernel/smp.c

@@ -24,6 +24,7 @@
 #include <linux/reboot.h>
 #include <linux/irqdomain.h>
 #include <linux/export.h>
+#include <linux/of_fdt.h>
 
 #include <asm/processor.h>
 #include <asm/setup.h>
@@ -47,6 +48,42 @@ void __init smp_prepare_boot_cpu(void)
 {
 }
 
+static int __init arc_get_cpu_map(const char *name, struct cpumask *cpumask)
+{
+	unsigned long dt_root = of_get_flat_dt_root();
+	const char *buf;
+
+	buf = of_get_flat_dt_prop(dt_root, name, NULL);
+	if (!buf)
+		return -EINVAL;
+
+	if (cpulist_parse(buf, cpumask))
+		return -EINVAL;
+
+	return 0;
+}
+
+/*
+ * Read from DeviceTree and setup cpu possible mask. If there is no
+ * "possible-cpus" property in DeviceTree pretend all [0..NR_CPUS-1] exist.
+ */
+static void __init arc_init_cpu_possible(void)
+{
+	struct cpumask cpumask;
+
+	if (arc_get_cpu_map("possible-cpus", &cpumask)) {
+		pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",
+			NR_CPUS);
+
+		cpumask_setall(&cpumask);
+	}
+
+	if (!cpumask_test_cpu(0, &cpumask))
+		panic("Master cpu (cpu[0]) is missed in cpu possible mask!");
+
+	init_cpu_possible(&cpumask);
+}
+
 /*
  * Called from setup_arch() before calling setup_processor()
  *
@@ -58,10 +95,7 @@ void __init smp_prepare_boot_cpu(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i;
-
-	for (i = 0; i < NR_CPUS; i++)
-		set_cpu_possible(i, true);
+	arc_init_cpu_possible();
 
 	if (plat_smp_ops.init_early_smp)
 		plat_smp_ops.init_early_smp();
@@ -70,16 +104,12 @@ void __init smp_init_cpus(void)
 /* called from init ( ) =>  process 1 */
 void __init smp_prepare_cpus(unsigned int max_cpus)
 {
-	int i;
-
 	/*
 	 * if platform didn't set the present map already, do it now
 	 * boot cpu is set to present already by init/main.c
 	 */
-	if (num_present_cpus() <= 1) {
-		for (i = 0; i < max_cpus; i++)
-			set_cpu_present(i, true);
-	}
+	if (num_present_cpus() <= 1)
+		init_cpu_present(cpu_possible_mask);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)

arch/arc/mm/cache.c

@@ -780,7 +780,10 @@ noinline static void slc_entire_op(const int op)
 
 	write_aux_reg(r, ctrl);
 
-	write_aux_reg(ARC_REG_SLC_INVALIDATE, 1);
+	if (op & OP_INV)	/* Inv or flush-n-inv use same cmd reg */
+		write_aux_reg(ARC_REG_SLC_INVALIDATE, 0x1);
+	else
+		write_aux_reg(ARC_REG_SLC_FLUSH, 0x1);
 
 	/* Make sure "busy" bit reports correct stataus, see STAR 9001165532 */
 	read_aux_reg(r);

include/soc/arc/mcip.h

@@ -15,6 +15,7 @@
 
 #define ARC_REG_MCIP_BCR	0x0d0
 #define ARC_REG_MCIP_IDU_BCR	0x0D5
+#define ARC_REG_GFRC_BUILD	0x0D6
 #define ARC_REG_MCIP_CMD	0x600
 #define ARC_REG_MCIP_WDATA	0x601
 #define ARC_REG_MCIP_READBACK	0x602
@@ -36,10 +37,14 @@ struct mcip_cmd {
 #define CMD_SEMA_RELEASE		0x12
 
 #define CMD_DEBUG_SET_MASK		0x34
+#define CMD_DEBUG_READ_MASK		0x35
 #define CMD_DEBUG_SET_SELECT		0x36
+#define CMD_DEBUG_READ_SELECT		0x37
 
 #define CMD_GFRC_READ_LO		0x42
 #define CMD_GFRC_READ_HI		0x43
+#define CMD_GFRC_SET_CORE		0x47
+#define CMD_GFRC_READ_CORE		0x48
 
 #define CMD_IDU_ENABLE			0x71
 #define CMD_IDU_DISABLE			0x72