Browse Source

Merge branch 'lan9303-Fix-STP-and-flooding-issues'

Egil Hjelmeland says:

====================
net: dsa: lan9303: Fix STP and flooding issues

This patch set finishes the STP support, and fixes flooding issues.

Patch 1 fixes a flooding issue in the previous patch set.
Patch 2 finishes STP support by adding a ALR entry.
Patch 3 prevent duplicate flooding in HW and SW bridge.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller 8 years ago
parent
commit
1f2c897cb1
3 changed files with 8 additions and 3 deletions
  1. 2 0
      drivers/net/dsa/lan9303-core.c
  2. 2 0
      include/linux/dsa/lan9303.h
  3. 4 3
      net/dsa/tag_lan9303.c

+ 2 - 0
drivers/net/dsa/lan9303-core.c

@@ -773,6 +773,7 @@ static int lan9303_separate_ports(struct lan9303 *chip)
 {
 	int ret;
 
+	lan9303_alr_del_port(chip, eth_stp_addr, 0);
 	ret = lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_MIRROR,
 				LAN9303_SWE_PORT_MIRROR_SNIFFER_PORT0 |
 				LAN9303_SWE_PORT_MIRROR_MIRRORED_PORT1 |
@@ -797,6 +798,7 @@ static void lan9303_bridge_ports(struct lan9303 *chip)
 
 	lan9303_write_switch_reg(chip, LAN9303_SWE_PORT_STATE,
 				 chip->swe_port_state);
+	lan9303_alr_add_port(chip, eth_stp_addr, 0, true);
 }
 
 static int lan9303_handle_reset(struct lan9303 *chip)

+ 2 - 0
include/linux/dsa/lan9303.h

@@ -34,3 +34,5 @@ struct lan9303 {
 	 **/
 	struct lan9303_alr_cache_entry alr_cache[LAN9303_NUM_ALR_RECORDS];
 };
+
+#define eth_stp_addr eth_reserved_addr_base

+ 4 - 3
net/dsa/tag_lan9303.c

@@ -42,11 +42,10 @@
 #define LAN9303_TAG_LEN 4
 # define LAN9303_TAG_TX_USE_ALR BIT(3)
 # define LAN9303_TAG_TX_STP_OVERRIDE BIT(4)
-#define eth_stp_addr eth_reserved_addr_base
 
 /* Decide whether to transmit using ALR lookup, or transmit directly to
  * port using tag. ALR learning is performed only when using ALR lookup.
- * If the two external ports are bridged and the packet is not STP BPDU,
+ * If the two external ports are bridged and the frame is unicast,
  * then use ALR lookup to allow ALR learning on CPU port.
  * Otherwise transmit directly to port with STP state override.
  * See also: lan9303_separate_ports() and lan9303.pdf 6.4.10.1
@@ -55,7 +54,7 @@ static int lan9303_xmit_use_arl(struct dsa_port *dp, u8 *dest_addr)
 {
 	struct lan9303 *chip = dp->ds->priv;
 
-	return chip->is_bridged && !ether_addr_equal(dest_addr, eth_stp_addr);
+	return chip->is_bridged && !is_multicast_ether_addr(dest_addr);
 }
 
 static struct sk_buff *lan9303_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -127,6 +126,8 @@ static struct sk_buff *lan9303_rcv(struct sk_buff *skb, struct net_device *dev,
 	skb_pull_rcsum(skb, 2 + 2);
 	memmove(skb->data - ETH_HLEN, skb->data - (ETH_HLEN + LAN9303_TAG_LEN),
 		2 * ETH_ALEN);
+	skb->offload_fwd_mark = !ether_addr_equal(skb->data - ETH_HLEN,
+						  eth_stp_addr);
 
 	return skb;
 }