mmc: tmio: Replace msleep() of 20ms or less with usleep_range()

As documented in Documentation/timers/timers-howto.txt
as follows, replace msleep() with usleep_range().

msleep(1~20) may not do what the caller intends, and
will often sleep longer (~20 ms actual sleep for any
value given in the 1~20ms range). In many cases this
is not the desired behavior.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/host/tmio_mmc_core.c

@@ -167,11 +167,11 @@ static void tmio_mmc_clk_start(struct tmio_mmc_host *host)
 
 	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
 	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		msleep(10);
+		usleep_range(10000, 11000);
 
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0100);
-		msleep(10);
+		usleep_range(10000, 11000);
 	}
 }
 
@@ -179,7 +179,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 {
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG) {
 		sd_ctrl_write16(host, CTL_CLK_AND_WAIT_CTL, 0x0000);
-		msleep(10);
+		usleep_range(10000, 11000);
 	}
 
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN &
@@ -187,7 +187,7 @@ static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
 
 	/* HW engineers overrode docs: no sleep needed on R-Car2+ */
 	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		msleep(10);
+		usleep_range(10000, 11000);
 }
 
 static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
@@ -219,7 +219,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host,
 			sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL));
 	sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK);
 	if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2))
-		msleep(10);
+		usleep_range(10000, 11000);
 
 	tmio_mmc_clk_start(host);
 }
@@ -230,11 +230,11 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host)
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0000);
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
 		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000);
-	msleep(10);
+	usleep_range(10000, 11000);
 	sd_ctrl_write16(host, CTL_RESET_SD, 0x0001);
 	if (host->pdata->flags & TMIO_MMC_HAVE_HIGH_REG)
 		sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0001);
-	msleep(10);
+	usleep_range(10000, 11000);
 
 	if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) {
 		sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask);