staging: dgnc: Remove non-standard APR/RAPR printing macros

This patch removes non-standard macros used by dgnc driver for printing error
or debugging messages. These are replaced by dev_err/dev_dbg (when possible)
or pr_err. There were cases where the message is completely removed since is
not adding any useful information.

Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc/dgnc_cls.c

@@ -724,10 +724,8 @@ static void cls_tasklet(unsigned long data)
 	int state = 0;
 	int ports = 0;
 
-	if (!bd || bd->magic != DGNC_BOARD_MAGIC) {
-		APR(("poll_tasklet() - NULL or bad bd.\n"));
+	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
 		return;
-	}
 
 	/* Cache a couple board values */
 	spin_lock_irqsave(&bd->bd_lock, flags);
@@ -799,20 +797,12 @@ static irqreturn_t cls_intr(int irq, void *voidbrd)
 	unsigned char poll_reg;
 	unsigned long flags;
 
-	if (!brd) {
-		APR(("Received interrupt (%d) with null board associated\n",
-									 irq));
-		return IRQ_NONE;
-	}
-
 	/*
-	 * Check to make sure its for us.
+	 * Check to make sure it didn't receive interrupt with a null board
+	 * associated or a board pointer that wasn't ours.
 	 */
-	if (brd->magic != DGNC_BOARD_MAGIC) {
-		APR(("Received interrupt (%d) with a board pointer that wasn't ours!\n",
-			  irq));
+	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
 		return IRQ_NONE;
-	}
 
 	spin_lock_irqsave(&brd->bd_intr_lock, flags);
 

drivers/staging/dgnc/dgnc_driver.c

@@ -207,8 +207,6 @@ static int __init dgnc_init_module(void)
 {
 	int rc = 0;
 
-	APR(("%s, Digi International Part Number %s\n", DG_NAME, DG_PART));
-
 	/*
 	 * Initialize global stuff
 	 */
@@ -254,8 +252,6 @@ static int dgnc_start(void)
 	/* make sure that the globals are init'd before we do anything else */
 	dgnc_init_globals();
 
-	APR(("For the tools package or updated drivers please visit http://www.digi.com\n"));
-
 	/*
 	 * Register our base character device into the kernel.
 	 * This allows the download daemon to connect to the downld device
@@ -265,7 +261,7 @@ static int dgnc_start(void)
 	 */
 	rc = register_chrdev(0, "dgnc", &dgnc_BoardFops);
 	if (rc <= 0) {
-		APR(("Can't register dgnc driver device (%d)\n", rc));
+		pr_err(DRVSTR ": Can't register dgnc driver device (%d)\n", rc);
 		return -ENXIO;
 	}
 	dgnc_Major = rc;
@@ -281,7 +277,7 @@ static int dgnc_start(void)
 	rc = dgnc_tty_preinit();
 
 	if (rc < 0) {
-		APR(("tty preinit - not enough memory (%d)\n", rc));
+		pr_err(DRVSTR ": tty preinit - not enough memory (%d)\n", rc);
 		return rc;
 	}
 
@@ -468,7 +464,8 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 		brd->membase = pci_resource_start(pdev, 4);
 
 		if (!brd->membase) {
-			APR(("card has no PCI IO resources, failing board.\n"));
+			dev_err(&brd->pdev->dev,
+				"Card has no PCI IO resources, failing.\n");
 			return -ENODEV;
 		}
 
@@ -555,7 +552,8 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 		break;
 
 	default:
-		APR(("Did not find any compatible Neo or Classic PCI boards in system.\n"));
+		dev_err(&brd->pdev->dev,
+			"Didn't find any compatible Neo/Classic PCI boards.\n");
 		return -ENXIO;
 
 	}
@@ -567,7 +565,7 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 	rc = dgnc_tty_register(brd);
 	if (rc < 0) {
 		dgnc_tty_uninit(brd);
-		APR(("Can't register tty devices (%d)\n", rc));
+		pr_err(DRVSTR ": Can't register tty devices (%d)\n", rc);
 		brd->state = BOARD_FAILED;
 		brd->dpastatus = BD_NOFEP;
 		goto failed;
@@ -575,7 +573,7 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 
 	rc = dgnc_finalize_board_init(brd);
 	if (rc < 0) {
-		APR(("Can't finalize board init (%d)\n", rc));
+		pr_err(DRVSTR ": Can't finalize board init (%d)\n", rc);
 		brd->state = BOARD_FAILED;
 		brd->dpastatus = BD_NOFEP;
 
@@ -585,7 +583,7 @@ static int dgnc_found_board(struct pci_dev *pdev, int id)
 	rc = dgnc_tty_init(brd);
 	if (rc < 0) {
 		dgnc_tty_uninit(brd);
-		APR(("Can't init tty devices (%d)\n", rc));
+		pr_err(DRVSTR ": Can't init tty devices (%d)\n", rc);
 		brd->state = BOARD_FAILED;
 		brd->dpastatus = BD_NOFEP;
 

drivers/staging/dgnc/dgnc_driver.h

@@ -42,21 +42,10 @@
  *
  *************************************************************************/
 
-/*
- * Driver identification, error and debugging statments
- *
- * In theory, you can change all occurrences of "digi" in the next
- * three lines, and the driver printk's will all automagically change.
- *
- * APR((fmt, args, ...));	Always prints message
- */
+/* Driver identification, error and debugging statments */
 #define	PROCSTR		"dgnc"			/* /proc entries	 */
 #define	DEVSTR		"/dev/dg/dgnc"		/* /dev entries		 */
-#define	DRVSTR		"dgnc"			/* Driver name string
-						 * displayed by APR	 */
-#define	APR(args)	do { printk(DRVSTR": "); printk args; \
-			   } while (0)
-#define	RAPR(args)	do { printk args; } while (0)
+#define	DRVSTR		"dgnc"			/* Driver name string	 */
 
 #define TRC_TO_CONSOLE 1
 

drivers/staging/dgnc/dgnc_neo.c

@@ -530,10 +530,11 @@ static inline void neo_parse_lsr(struct dgnc_board *brd, uint port)
 	int linestatus;
 	unsigned long flags;
 
-	if (!brd)
-		return;
-
-	if (brd->magic != DGNC_BOARD_MAGIC)
+	/*
+	 * Check to make sure it didn't receive interrupt with a null board
+	 * associated or a board pointer that wasn't ours.
+	 */
+	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
 		return;
 
 	if (port > brd->maxports)
@@ -869,10 +870,8 @@ static void neo_tasklet(unsigned long data)
 	int state = 0;
 	int ports = 0;
 
-	if (!bd || bd->magic != DGNC_BOARD_MAGIC) {
-		APR(("poll_tasklet() - NULL or bad bd.\n"));
+	if (!bd || bd->magic != DGNC_BOARD_MAGIC)
 		return;
-	}
 
 	/* Cache a couple board values */
 	spin_lock_irqsave(&bd->bd_lock, flags);
@@ -955,18 +954,12 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
 	unsigned long flags;
 	unsigned long flags2;
 
-	if (!brd) {
-		APR(("Received interrupt (%d) with null board associated\n", irq));
-		return IRQ_NONE;
-	}
-
 	/*
-	 * Check to make sure its for us.
+	 * Check to make sure it didn't receive interrupt with a null board
+	 * associated or a board pointer that wasn't ours.
 	 */
-	if (brd->magic != DGNC_BOARD_MAGIC) {
-		APR(("Received interrupt (%d) with a board pointer that wasn't ours!\n", irq));
+	if (!brd || brd->magic != DGNC_BOARD_MAGIC)
 		return IRQ_NONE;
-	}
 
 	brd->intr_count++;
 

drivers/staging/dgnc/dgnc_tty.c

@@ -233,7 +233,8 @@ int dgnc_tty_register(struct dgnc_board *brd)
 		/* Register tty devices */
 		rc = tty_register_driver(&brd->SerialDriver);
 		if (rc < 0) {
-			APR(("Can't register tty device (%d)\n", rc));
+			dev_dbg(&brd->pdev->dev,
+				"Can't register tty device (%d)\n", rc);
 			return rc;
 		}
 		brd->dgnc_Major_Serial_Registered = TRUE;
@@ -281,7 +282,9 @@ int dgnc_tty_register(struct dgnc_board *brd)
 		/* Register Transparent Print devices */
 		rc = tty_register_driver(&brd->PrintDriver);
 		if (rc < 0) {
-			APR(("Can't register Transparent Print device (%d)\n", rc));
+			dev_dbg(&brd->pdev->dev,
+				"Can't register Transparent Print device(%d)\n",
+				rc);
 			return rc;
 		}
 		brd->dgnc_Major_TransparentPrint_Registered = TRUE;
@@ -1546,14 +1549,18 @@ static void dgnc_tty_close(struct tty_struct *tty, struct file *file)
 		 * one, we've got real problems, since it means the
 		 * serial port won't be shutdown.
 		 */
-		APR(("tty->count is 1, un open count is %d\n", un->un_open_count));
+		dev_dbg(tty->dev,
+			"tty->count is 1, un open count is %d\n",
+			un->un_open_count);
 		un->un_open_count = 1;
 	}
 
 	if (un->un_open_count)
 		un->un_open_count--;
 	else
-		APR(("bad serial port open count of %d\n", un->un_open_count));
+		dev_dbg(tty->dev,
+			"bad serial port open count of %d\n",
+			un->un_open_count);
 
 	ch->ch_open_count--;