Merge branch 'qed-fixes'

Yuval Mintz says:

====================
qed: Fixes series

This address several different issues in qed.
The more significant portions:

Patch #1 would cause timeout when qedr utilizes the highest
CIDs availble for it [or when future qede adapters would utilize
queues in some constellations].

Patch #4 fixes a leak of mapped addresses; When iommu is enabled,
offloaded storage protocols might eventually run out of resources
and fail to map additional buffers.

Patches #6,#7 were missing in the initial iSCSI infrastructure
submissions, and would hamper qedi's stability when it reaches
out-of-order scenarios.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_cxt.c

@@ -422,8 +422,9 @@ static void qed_cxt_set_proto_cid_count(struct qed_hwfn *p_hwfn,
 		u32 page_sz = p_mgr->clients[ILT_CLI_CDUC].p_size.val;
 		u32 cxt_size = CONN_CXT_SIZE(p_hwfn);
 		u32 elems_per_page = ILT_PAGE_IN_BYTES(page_sz) / cxt_size;
+		u32 align = elems_per_page * DQ_RANGE_ALIGN;
 
-		p_conn->cid_count = roundup(p_conn->cid_count, elems_per_page);
+		p_conn->cid_count = roundup(p_conn->cid_count, align);
 	}
 }
 

drivers/net/ethernet/qlogic/qed/qed_dev.c

@@ -2389,9 +2389,8 @@ qed_chain_alloc_sanity_check(struct qed_dev *cdev,
 	 * size/capacity fields are of a u32 type.
 	 */
 	if ((cnt_type == QED_CHAIN_CNT_TYPE_U16 &&
-	     chain_size > 0x10000) ||
-	    (cnt_type == QED_CHAIN_CNT_TYPE_U32 &&
-	     chain_size > 0x100000000ULL)) {
+	     chain_size > ((u32)U16_MAX + 1)) ||
+	    (cnt_type == QED_CHAIN_CNT_TYPE_U32 && chain_size > U32_MAX)) {
 		DP_NOTICE(cdev,
 			  "The actual chain size (0x%llx) is larger than the maximal possible value\n",
 			  chain_size);

drivers/net/ethernet/qlogic/qed/qed_iscsi.c

@@ -190,6 +190,9 @@ qed_sp_iscsi_func_start(struct qed_hwfn *p_hwfn,
 	p_init->num_sq_pages_in_ring = p_params->num_sq_pages_in_ring;
 	p_init->num_r2tq_pages_in_ring = p_params->num_r2tq_pages_in_ring;
 	p_init->num_uhq_pages_in_ring = p_params->num_uhq_pages_in_ring;
+	p_init->ooo_enable = p_params->ooo_enable;
+	p_init->ll2_rx_queue_id = p_hwfn->hw_info.resc_start[QED_LL2_QUEUE] +
+				  p_params->ll2_ooo_queue_id;
 	p_init->func_params.log_page_size = p_params->log_page_size;
 	val = p_params->num_tasks;
 	p_init->func_params.num_tasks = cpu_to_le16(val);
@@ -786,6 +789,23 @@ static void qed_iscsi_release_connection(struct qed_hwfn *p_hwfn,
 	spin_unlock_bh(&p_hwfn->p_iscsi_info->lock);
 }
 
+void qed_iscsi_free_connection(struct qed_hwfn *p_hwfn,
+			       struct qed_iscsi_conn *p_conn)
+{
+	qed_chain_free(p_hwfn->cdev, &p_conn->xhq);
+	qed_chain_free(p_hwfn->cdev, &p_conn->uhq);
+	qed_chain_free(p_hwfn->cdev, &p_conn->r2tq);
+	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
+			  sizeof(struct tcp_upload_params),
+			  p_conn->tcp_upload_params_virt_addr,
+			  p_conn->tcp_upload_params_phys_addr);
+	dma_free_coherent(&p_hwfn->cdev->pdev->dev,
+			  sizeof(struct scsi_terminate_extra_params),
+			  p_conn->queue_cnts_virt_addr,
+			  p_conn->queue_cnts_phys_addr);
+	kfree(p_conn);
+}
+
 struct qed_iscsi_info *qed_iscsi_alloc(struct qed_hwfn *p_hwfn)
 {
 	struct qed_iscsi_info *p_iscsi_info;
@@ -807,6 +827,17 @@ void qed_iscsi_setup(struct qed_hwfn *p_hwfn,
 void qed_iscsi_free(struct qed_hwfn *p_hwfn,
 		    struct qed_iscsi_info *p_iscsi_info)
 {
+	struct qed_iscsi_conn *p_conn = NULL;
+
+	while (!list_empty(&p_hwfn->p_iscsi_info->free_list)) {
+		p_conn = list_first_entry(&p_hwfn->p_iscsi_info->free_list,
+					  struct qed_iscsi_conn, list_entry);
+		if (p_conn) {
+			list_del(&p_conn->list_entry);
+			qed_iscsi_free_connection(p_hwfn, p_conn);
+		}
+	}
+
 	kfree(p_iscsi_info);
 }
 

drivers/net/ethernet/qlogic/qed/qed_ll2.c

@@ -211,6 +211,8 @@ static void qed_ll2b_complete_rx_packet(struct qed_hwfn *p_hwfn,
 	/* If need to reuse or there's no replacement buffer, repost this */
 	if (rc)
 		goto out_post;
+	dma_unmap_single(&cdev->pdev->dev, buffer->phys_addr,
+			 cdev->ll2->rx_size, DMA_FROM_DEVICE);
 
 	skb = build_skb(buffer->data, 0);
 	if (!skb) {
@@ -474,7 +476,7 @@ qed_ll2_rxq_completion_gsi(struct qed_hwfn *p_hwfn,
 static int qed_ll2_rxq_completion_reg(struct qed_hwfn *p_hwfn,
 				      struct qed_ll2_info *p_ll2_conn,
 				      union core_rx_cqe_union *p_cqe,
-				      unsigned long lock_flags,
+				      unsigned long *p_lock_flags,
 				      bool b_last_cqe)
 {
 	struct qed_ll2_rx_queue *p_rx = &p_ll2_conn->rx_queue;
@@ -495,10 +497,10 @@ static int qed_ll2_rxq_completion_reg(struct qed_hwfn *p_hwfn,
 			  "Mismatch between active_descq and the LL2 Rx chain\n");
 	list_add_tail(&p_pkt->list_entry, &p_rx->free_descq);
 
-	spin_unlock_irqrestore(&p_rx->lock, lock_flags);
+	spin_unlock_irqrestore(&p_rx->lock, *p_lock_flags);
 	qed_ll2b_complete_rx_packet(p_hwfn, p_ll2_conn->my_id,
 				    p_pkt, &p_cqe->rx_cqe_fp, b_last_cqe);
-	spin_lock_irqsave(&p_rx->lock, lock_flags);
+	spin_lock_irqsave(&p_rx->lock, *p_lock_flags);
 
 	return 0;
 }
@@ -538,7 +540,8 @@ static int qed_ll2_rxq_completion(struct qed_hwfn *p_hwfn, void *cookie)
 			break;
 		case CORE_RX_CQE_TYPE_REGULAR:
 			rc = qed_ll2_rxq_completion_reg(p_hwfn, p_ll2_conn,
-							cqe, flags, b_last_cqe);
+							cqe, &flags,
+							b_last_cqe);
 			break;
 		default:
 			rc = -EIO;

drivers/net/ethernet/qlogic/qed/qed_ooo.c

@@ -159,6 +159,8 @@ struct qed_ooo_info *qed_ooo_alloc(struct qed_hwfn *p_hwfn)
 	if (!p_ooo_info->ooo_history.p_cqes)
 		goto no_history_mem;
 
+	p_ooo_info->ooo_history.num_of_cqes = QED_MAX_NUM_OOO_HISTORY_ENTRIES;
+
 	return p_ooo_info;
 
 no_history_mem: