Merge tag 'fixes-for-v3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into work-linus

Felipe writes:

usb: fixes for v3.17-rc2

Here's our first set of fixes for v3.17-rc cycle. Most fixes are
pretty minor changes like the signedness bug in dwc3, or the wrong
string format on MUSB.

The most interesting part is the addition of Intel Quark X1000 support
to PCH UDC.

Signed-of-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc3/dwc3-omap.c

@@ -425,7 +425,7 @@ static void dwc3_omap_set_utmi_mode(struct dwc3_omap *omap)
 
 static int dwc3_omap_extcon_register(struct dwc3_omap *omap)
 {
-	u32			ret;
+	int			ret;
 	struct device_node	*node = omap->dev->of_node;
 	struct extcon_dev	*edev;
 

drivers/usb/gadget/Makefile

@@ -3,7 +3,7 @@
 #
 subdir-ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
 subdir-ccflags-$(CONFIG_USB_GADGET_VERBOSE)	+= -DVERBOSE_DEBUG
-ccflags-y				+= -I$(PWD)/drivers/usb/gadget/udc
+ccflags-y				+= -Idrivers/usb/gadget/udc
 
 obj-$(CONFIG_USB_LIBCOMPOSITE)	+= libcomposite.o
 libcomposite-y			:= usbstring.o config.o epautoconf.o

drivers/usb/gadget/function/Makefile

@@ -2,8 +2,8 @@
 # USB peripheral controller drivers
 #
 
-ccflags-y			:= -I$(PWD)/drivers/usb/gadget/
-ccflags-y			+= -I$(PWD)/drivers/usb/gadget/udc/
+ccflags-y			:= -Idrivers/usb/gadget/
+ccflags-y			+= -Idrivers/usb/gadget/udc/
 
 # USB Functions
 usb_f_acm-y			:= f_acm.o

drivers/usb/gadget/function/u_ether.c

@@ -1127,10 +1127,7 @@ void gether_disconnect(struct gether *link)
 
 	DBG(dev, "%s\n", __func__);
 
-	netif_tx_lock(dev->net);
 	netif_stop_queue(dev->net);
-	netif_tx_unlock(dev->net);
-
 	netif_carrier_off(dev->net);
 
 	/* disable endpoints, forcing (synchronous) completion

drivers/usb/gadget/function/uvc_video.c

@@ -195,6 +195,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req)
 		printk(KERN_INFO "Failed to queue request (%d).\n", ret);
 		usb_ep_set_halt(ep);
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);
+		uvc_queue_cancel(queue, 0);
 		goto requeue;
 	}
 	spin_unlock_irqrestore(&video->queue.irqlock, flags);
@@ -281,6 +282,7 @@ error:
 static int
 uvc_video_pump(struct uvc_video *video)
 {
+	struct uvc_video_queue *queue = &video->queue;
 	struct usb_request *req;
 	struct uvc_buffer *buf;
 	unsigned long flags;
@@ -322,6 +324,7 @@ uvc_video_pump(struct uvc_video *video)
 			printk(KERN_INFO "Failed to queue request (%d)\n", ret);
 			usb_ep_set_halt(video->ep);
 			spin_unlock_irqrestore(&video->queue.irqlock, flags);
+			uvc_queue_cancel(queue, 0);
 			break;
 		}
 		spin_unlock_irqrestore(&video->queue.irqlock, flags);

drivers/usb/gadget/legacy/Makefile

@@ -2,9 +2,9 @@
 # USB gadget drivers
 #
 
-ccflags-y			:= -I$(PWD)/drivers/usb/gadget/
-ccflags-y			+= -I$(PWD)/drivers/usb/gadget/udc/
-ccflags-y			+= -I$(PWD)/drivers/usb/gadget/function/
+ccflags-y			:= -Idrivers/usb/gadget/
+ccflags-y			+= -Idrivers/usb/gadget/udc/
+ccflags-y			+= -Idrivers/usb/gadget/function/
 
 g_zero-y			:= zero.o
 g_audio-y			:= audio.o

drivers/usb/gadget/legacy/dbgp.c

@@ -222,10 +222,12 @@ static void dbgp_unbind(struct usb_gadget *gadget)
 {
 #ifdef CONFIG_USB_G_DBGP_SERIAL
 	kfree(dbgp.serial);
+	dbgp.serial = NULL;
 #endif
 	if (dbgp.req) {
 		kfree(dbgp.req->buf);
 		usb_ep_free_request(gadget->ep0, dbgp.req);
+		dbgp.req = NULL;
 	}
 
 	gadget->ep0->driver_data = NULL;

drivers/usb/gadget/legacy/inode.c

@@ -440,7 +440,7 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 
 	value = -ENOMEM;
 	kbuf = memdup_user(buf, len);
-	if (!kbuf) {
+	if (IS_ERR(kbuf)) {
 		value = PTR_ERR(kbuf);
 		goto free1;
 	}

drivers/usb/gadget/udc/Kconfig

@@ -332,7 +332,7 @@ config USB_GOKU
 	   gadget drivers to also be dynamically linked.
 
 config USB_EG20T
-	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
+	tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
 	depends on PCI
 	help
 	  This is a USB device driver for EG20T PCH.
@@ -353,6 +353,7 @@ config USB_EG20T
 	  ML7213/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7831 is completely compatible for Intel EG20T PCH.
 
+	  This driver can be used with Intel's Quark X1000 SOC platform
 #
 # LAST -- dummy/emulated controller
 #

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
 	if (dma_status) {
 		int i;
 
-		for (i = 1; i < USBA_NR_DMAS; i++)
+		for (i = 1; i <= USBA_NR_DMAS; i++)
 			if (dma_status & (1 << i))
 				usba_dma_irq(udc, &udc->usba_ep[i]);
 	}

drivers/usb/gadget/udc/fusb300_udc.c

@@ -1398,13 +1398,17 @@ static int fusb300_probe(struct platform_device *pdev)
 
 	/* initialize udc */
 	fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
-	if (fusb300 == NULL)
+	if (fusb300 == NULL) {
+		ret = -ENOMEM;
 		goto clean_up;
+	}
 
 	for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
 		_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
-		if (_ep[i] == NULL)
+		if (_ep[i] == NULL) {
+			ret = -ENOMEM;
 			goto clean_up;
+		}
 		fusb300->ep[i] = _ep[i];
 	}
 

drivers/usb/gadget/udc/pch_udc.c

@@ -343,6 +343,7 @@ struct pch_vbus_gpio_data {
  * @setup_data:		Received setup data
  * @phys_addr:		of device memory
  * @base_addr:		for mapped device memory
+ * @bar:		Indicates which PCI BAR for USB regs
  * @irq:		IRQ line for the device
  * @cfg_data:		current cfg, intf, and alt in use
  * @vbus_gpio:		GPIO informaton for detecting VBUS
@@ -370,14 +371,17 @@ struct pch_udc_dev {
 	struct usb_ctrlrequest		setup_data;
 	unsigned long			phys_addr;
 	void __iomem			*base_addr;
+	unsigned			bar;
 	unsigned			irq;
 	struct pch_udc_cfg_data		cfg_data;
 	struct pch_vbus_gpio_data	vbus_gpio;
 };
 #define to_pch_udc(g)	(container_of((g), struct pch_udc_dev, gadget))
 
+#define PCH_UDC_PCI_BAR_QUARK_X1000	0
 #define PCH_UDC_PCI_BAR			1
 #define PCI_DEVICE_ID_INTEL_EG20T_UDC	0x8808
+#define PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC	0x0939
 #define PCI_VENDOR_ID_ROHM		0x10DB
 #define PCI_DEVICE_ID_ML7213_IOH_UDC	0x801D
 #define PCI_DEVICE_ID_ML7831_IOH_UDC	0x8808
@@ -3076,7 +3080,7 @@ static void pch_udc_remove(struct pci_dev *pdev)
 		iounmap(dev->base_addr);
 	if (dev->mem_region)
 		release_mem_region(dev->phys_addr,
-				   pci_resource_len(pdev, PCH_UDC_PCI_BAR));
+				   pci_resource_len(pdev, dev->bar));
 	if (dev->active)
 		pci_disable_device(pdev);
 	kfree(dev);
@@ -3144,9 +3148,15 @@ static int pch_udc_probe(struct pci_dev *pdev,
 	dev->active = 1;
 	pci_set_drvdata(pdev, dev);
 
+	/* Determine BAR based on PCI ID */
+	if (id->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC)
+		dev->bar = PCH_UDC_PCI_BAR_QUARK_X1000;
+	else
+		dev->bar = PCH_UDC_PCI_BAR;
+
 	/* PCI resource allocation */
-	resource = pci_resource_start(pdev, 1);
-	len = pci_resource_len(pdev, 1);
+	resource = pci_resource_start(pdev, dev->bar);
+	len = pci_resource_len(pdev, dev->bar);
 
 	if (!request_mem_region(resource, len, KBUILD_MODNAME)) {
 		dev_err(&pdev->dev, "%s: pci device used already\n", __func__);
@@ -3211,6 +3221,12 @@ finished:
 }
 
 static const struct pci_device_id pch_udc_pcidev_id[] = {
+	{
+		PCI_DEVICE(PCI_VENDOR_ID_INTEL,
+			   PCI_DEVICE_ID_INTEL_QUARK_X1000_UDC),
+		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,
+		.class_mask = 0xffffffff,
+	},
 	{
 		PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EG20T_UDC),
 		.class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe,

drivers/usb/gadget/udc/r8a66597-udc.c

@@ -1868,8 +1868,8 @@ static int r8a66597_probe(struct platform_device *pdev)
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	reg = devm_ioremap_resource(&pdev->dev, res);
-	if (!reg)
-		return -ENODEV;
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
 
 	ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	irq = ires->start;

drivers/usb/musb/ux500_dma.c

@@ -96,7 +96,7 @@ static bool ux500_configure_channel(struct dma_channel *channel,
 	struct musb *musb = ux500_channel->controller->private_data;
 
 	dev_dbg(musb->controller,
-		"packet_sz=%d, mode=%d, dma_addr=0x%llu, len=%d is_tx=%d\n",
+		"packet_sz=%d, mode=%d, dma_addr=0x%llx, len=%d is_tx=%d\n",
 		packet_sz, mode, (unsigned long long) dma_addr,
 		len, ux500_channel->is_tx);
 

drivers/usb/phy/phy-gpio-vbus-usb.c

@@ -260,10 +260,8 @@ static int gpio_vbus_probe(struct platform_device *pdev)
 
 	gpio_vbus->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
 					  GFP_KERNEL);
-	if (!gpio_vbus->phy.otg) {
-		kfree(gpio_vbus);
+	if (!gpio_vbus->phy.otg)
 		return -ENOMEM;
-	}
 
 	platform_set_drvdata(pdev, gpio_vbus);
 	gpio_vbus->dev = &pdev->dev;

drivers/usb/phy/phy-msm-usb.c

@@ -1601,8 +1601,8 @@ static int msm_otg_probe(struct platform_device *pdev)
 	 */
 	if (motg->phy_number) {
 		phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
-		if (IS_ERR(phy_select))
-			return PTR_ERR(phy_select);
+		if (!phy_select)
+			return -ENOMEM;
 		/* Enable second PHY with the OTG port */
 		writel(0x1, phy_select);
 	}

drivers/usb/phy/phy-samsung-usb.h

@@ -216,7 +216,7 @@
 
 #define EXYNOS5_DRD_PHYPARAM1			(0x20)
 
-#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x1f << 0)
+#define PHYPARAM1_PCS_TXDEEMPH_MASK		(0x3f << 0)
 #define PHYPARAM1_PCS_TXDEEMPH			(0x1c)
 
 #define EXYNOS5_DRD_PHYTERM			(0x24)

drivers/usb/phy/phy.c

@@ -232,6 +232,9 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index)
 	phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
 	if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
 		dev_dbg(dev, "unable to find transceiver\n");
+		if (!IS_ERR(phy))
+			phy = ERR_PTR(-ENODEV);
+
 		goto err0;
 	}